| /* |
| * mdt.c - meta data file for NILFS |
| * |
| * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| * Written by Ryusuke Konishi <ryusuke@osrg.net> |
| */ |
| |
| #include <linux/buffer_head.h> |
| #include <linux/mpage.h> |
| #include <linux/mm.h> |
| #include <linux/writeback.h> |
| #include <linux/backing-dev.h> |
| #include <linux/swap.h> |
| #include <linux/slab.h> |
| #include "nilfs.h" |
| #include "btnode.h" |
| #include "segment.h" |
| #include "page.h" |
| #include "mdt.h" |
| |
| |
| #define NILFS_MDT_MAX_RA_BLOCKS (16 - 1) |
| |
| #define INIT_UNUSED_INODE_FIELDS |
| |
| static int |
| nilfs_mdt_insert_new_block(struct inode *inode, unsigned long block, |
| struct buffer_head *bh, |
| void (*init_block)(struct inode *, |
| struct buffer_head *, void *)) |
| { |
| struct nilfs_inode_info *ii = NILFS_I(inode); |
| void *kaddr; |
| int ret; |
| |
| /* Caller exclude read accesses using page lock */ |
| |
| /* set_buffer_new(bh); */ |
| bh->b_blocknr = 0; |
| |
| ret = nilfs_bmap_insert(ii->i_bmap, block, (unsigned long)bh); |
| if (unlikely(ret)) |
| return ret; |
| |
| set_buffer_mapped(bh); |
| |
| kaddr = kmap_atomic(bh->b_page, KM_USER0); |
| memset(kaddr + bh_offset(bh), 0, 1 << inode->i_blkbits); |
| if (init_block) |
| init_block(inode, bh, kaddr); |
| flush_dcache_page(bh->b_page); |
| kunmap_atomic(kaddr, KM_USER0); |
| |
| set_buffer_uptodate(bh); |
| nilfs_mark_buffer_dirty(bh); |
| nilfs_mdt_mark_dirty(inode); |
| return 0; |
| } |
| |
| static int nilfs_mdt_create_block(struct inode *inode, unsigned long block, |
| struct buffer_head **out_bh, |
| void (*init_block)(struct inode *, |
| struct buffer_head *, |
| void *)) |
| { |
| struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs; |
| struct super_block *sb = inode->i_sb; |
| struct nilfs_transaction_info ti; |
| struct buffer_head *bh; |
| int err; |
| |
| if (!sb) { |
| /* |
| * Make sure this function is not called from any |
| * read-only context. |
| */ |
| if (!nilfs->ns_writer) { |
| WARN_ON(1); |
| err = -EROFS; |
| goto out; |
| } |
| sb = nilfs->ns_writer->s_super; |
| } |
| |
| nilfs_transaction_begin(sb, &ti, 0); |
| |
| err = -ENOMEM; |
| bh = nilfs_grab_buffer(inode, inode->i_mapping, block, 0); |
| if (unlikely(!bh)) |
| goto failed_unlock; |
| |
| err = -EEXIST; |
| if (buffer_uptodate(bh)) |
| goto failed_bh; |
| |
| wait_on_buffer(bh); |
| if (buffer_uptodate(bh)) |
| goto failed_bh; |
| |
| bh->b_bdev = nilfs->ns_bdev; |
| err = nilfs_mdt_insert_new_block(inode, block, bh, init_block); |
| if (likely(!err)) { |
| get_bh(bh); |
| *out_bh = bh; |
| } |
| |
| failed_bh: |
| unlock_page(bh->b_page); |
| page_cache_release(bh->b_page); |
| brelse(bh); |
| |
| failed_unlock: |
| if (likely(!err)) |
| err = nilfs_transaction_commit(sb); |
| else |
| nilfs_transaction_abort(sb); |
| out: |
| return err; |
| } |
| |
| static int |
| nilfs_mdt_submit_block(struct inode *inode, unsigned long blkoff, |
| int mode, struct buffer_head **out_bh) |
| { |
| struct buffer_head *bh; |
| __u64 blknum = 0; |
| int ret = -ENOMEM; |
| |
| bh = nilfs_grab_buffer(inode, inode->i_mapping, blkoff, 0); |
| if (unlikely(!bh)) |
| goto failed; |
| |
| ret = -EEXIST; /* internal code */ |
| if (buffer_uptodate(bh)) |
| goto out; |
| |
| if (mode == READA) { |
| if (!trylock_buffer(bh)) { |
| ret = -EBUSY; |
| goto failed_bh; |
| } |
| } else /* mode == READ */ |
| lock_buffer(bh); |
| |
| if (buffer_uptodate(bh)) { |
| unlock_buffer(bh); |
| goto out; |
| } |
| |
| ret = nilfs_bmap_lookup(NILFS_I(inode)->i_bmap, blkoff, &blknum); |
| if (unlikely(ret)) { |
| unlock_buffer(bh); |
| goto failed_bh; |
| } |
| bh->b_bdev = NILFS_MDT(inode)->mi_nilfs->ns_bdev; |
| bh->b_blocknr = (sector_t)blknum; |
| set_buffer_mapped(bh); |
| |
| bh->b_end_io = end_buffer_read_sync; |
| get_bh(bh); |
| submit_bh(mode, bh); |
| ret = 0; |
| out: |
| get_bh(bh); |
| *out_bh = bh; |
| |
| failed_bh: |
| unlock_page(bh->b_page); |
| page_cache_release(bh->b_page); |
| brelse(bh); |
| failed: |
| return ret; |
| } |
| |
| static int nilfs_mdt_read_block(struct inode *inode, unsigned long block, |
| int readahead, struct buffer_head **out_bh) |
| { |
| struct buffer_head *first_bh, *bh; |
| unsigned long blkoff; |
| int i, nr_ra_blocks = NILFS_MDT_MAX_RA_BLOCKS; |
| int err; |
| |
| err = nilfs_mdt_submit_block(inode, block, READ, &first_bh); |
| if (err == -EEXIST) /* internal code */ |
| goto out; |
| |
| if (unlikely(err)) |
| goto failed; |
| |
| if (readahead) { |
| blkoff = block + 1; |
| for (i = 0; i < nr_ra_blocks; i++, blkoff++) { |
| err = nilfs_mdt_submit_block(inode, blkoff, READA, &bh); |
| if (likely(!err || err == -EEXIST)) |
| brelse(bh); |
| else if (err != -EBUSY) |
| break; |
| /* abort readahead if bmap lookup failed */ |
| if (!buffer_locked(first_bh)) |
| goto out_no_wait; |
| } |
| } |
| |
| wait_on_buffer(first_bh); |
| |
| out_no_wait: |
| err = -EIO; |
| if (!buffer_uptodate(first_bh)) |
| goto failed_bh; |
| out: |
| *out_bh = first_bh; |
| return 0; |
| |
| failed_bh: |
| brelse(first_bh); |
| failed: |
| return err; |
| } |
| |
| /** |
| * nilfs_mdt_get_block - read or create a buffer on meta data file. |
| * @inode: inode of the meta data file |
| * @blkoff: block offset |
| * @create: create flag |
| * @init_block: initializer used for newly allocated block |
| * @out_bh: output of a pointer to the buffer_head |
| * |
| * nilfs_mdt_get_block() looks up the specified buffer and tries to create |
| * a new buffer if @create is not zero. On success, the returned buffer is |
| * assured to be either existing or formatted using a buffer lock on success. |
| * @out_bh is substituted only when zero is returned. |
| * |
| * Return Value: On success, it returns 0. On error, the following negative |
| * error code is returned. |
| * |
| * %-ENOMEM - Insufficient memory available. |
| * |
| * %-EIO - I/O error |
| * |
| * %-ENOENT - the specified block does not exist (hole block) |
| * |
| * %-EINVAL - bmap is broken. (the caller should call nilfs_error()) |
| * |
| * %-EROFS - Read only filesystem (for create mode) |
| */ |
| int nilfs_mdt_get_block(struct inode *inode, unsigned long blkoff, int create, |
| void (*init_block)(struct inode *, |
| struct buffer_head *, void *), |
| struct buffer_head **out_bh) |
| { |
| int ret; |
| |
| /* Should be rewritten with merging nilfs_mdt_read_block() */ |
| retry: |
| ret = nilfs_mdt_read_block(inode, blkoff, !create, out_bh); |
| if (!create || ret != -ENOENT) |
| return ret; |
| |
| ret = nilfs_mdt_create_block(inode, blkoff, out_bh, init_block); |
| if (unlikely(ret == -EEXIST)) { |
| /* create = 0; */ /* limit read-create loop retries */ |
| goto retry; |
| } |
| return ret; |
| } |
| |
| /** |
| * nilfs_mdt_delete_block - make a hole on the meta data file. |
| * @inode: inode of the meta data file |
| * @block: block offset |
| * |
| * Return Value: On success, zero is returned. |
| * On error, one of the following negative error code is returned. |
| * |
| * %-ENOMEM - Insufficient memory available. |
| * |
| * %-EIO - I/O error |
| * |
| * %-EINVAL - bmap is broken. (the caller should call nilfs_error()) |
| */ |
| int nilfs_mdt_delete_block(struct inode *inode, unsigned long block) |
| { |
| struct nilfs_inode_info *ii = NILFS_I(inode); |
| int err; |
| |
| err = nilfs_bmap_delete(ii->i_bmap, block); |
| if (!err || err == -ENOENT) { |
| nilfs_mdt_mark_dirty(inode); |
| nilfs_mdt_forget_block(inode, block); |
| } |
| return err; |
| } |
| |
| /** |
| * nilfs_mdt_forget_block - discard dirty state and try to remove the page |
| * @inode: inode of the meta data file |
| * @block: block offset |
| * |
| * nilfs_mdt_forget_block() clears a dirty flag of the specified buffer, and |
| * tries to release the page including the buffer from a page cache. |
| * |
| * Return Value: On success, 0 is returned. On error, one of the following |
| * negative error code is returned. |
| * |
| * %-EBUSY - page has an active buffer. |
| * |
| * %-ENOENT - page cache has no page addressed by the offset. |
| */ |
| int nilfs_mdt_forget_block(struct inode *inode, unsigned long block) |
| { |
| pgoff_t index = (pgoff_t)block >> |
| (PAGE_CACHE_SHIFT - inode->i_blkbits); |
| struct page *page; |
| unsigned long first_block; |
| int ret = 0; |
| int still_dirty; |
| |
| page = find_lock_page(inode->i_mapping, index); |
| if (!page) |
| return -ENOENT; |
| |
| wait_on_page_writeback(page); |
| |
| first_block = (unsigned long)index << |
| (PAGE_CACHE_SHIFT - inode->i_blkbits); |
| if (page_has_buffers(page)) { |
| struct buffer_head *bh; |
| |
| bh = nilfs_page_get_nth_block(page, block - first_block); |
| nilfs_forget_buffer(bh); |
| } |
| still_dirty = PageDirty(page); |
| unlock_page(page); |
| page_cache_release(page); |
| |
| if (still_dirty || |
| invalidate_inode_pages2_range(inode->i_mapping, index, index) != 0) |
| ret = -EBUSY; |
| return ret; |
| } |
| |
| /** |
| * nilfs_mdt_mark_block_dirty - mark a block on the meta data file dirty. |
| * @inode: inode of the meta data file |
| * @block: block offset |
| * |
| * Return Value: On success, it returns 0. On error, the following negative |
| * error code is returned. |
| * |
| * %-ENOMEM - Insufficient memory available. |
| * |
| * %-EIO - I/O error |
| * |
| * %-ENOENT - the specified block does not exist (hole block) |
| * |
| * %-EINVAL - bmap is broken. (the caller should call nilfs_error()) |
| */ |
| int nilfs_mdt_mark_block_dirty(struct inode *inode, unsigned long block) |
| { |
| struct buffer_head *bh; |
| int err; |
| |
| err = nilfs_mdt_read_block(inode, block, 0, &bh); |
| if (unlikely(err)) |
| return err; |
| nilfs_mark_buffer_dirty(bh); |
| nilfs_mdt_mark_dirty(inode); |
| brelse(bh); |
| return 0; |
| } |
| |
| int nilfs_mdt_fetch_dirty(struct inode *inode) |
| { |
| struct nilfs_inode_info *ii = NILFS_I(inode); |
| |
| if (nilfs_bmap_test_and_clear_dirty(ii->i_bmap)) { |
| set_bit(NILFS_I_DIRTY, &ii->i_state); |
| return 1; |
| } |
| return test_bit(NILFS_I_DIRTY, &ii->i_state); |
| } |
| |
| static int |
| nilfs_mdt_write_page(struct page *page, struct writeback_control *wbc) |
| { |
| struct inode *inode = container_of(page->mapping, |
| struct inode, i_data); |
| struct super_block *sb = inode->i_sb; |
| struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs; |
| struct nilfs_sb_info *writer = NULL; |
| int err = 0; |
| |
| redirty_page_for_writepage(wbc, page); |
| unlock_page(page); |
| |
| if (page->mapping->assoc_mapping) |
| return 0; /* Do not request flush for shadow page cache */ |
| if (!sb) { |
| down_read(&nilfs->ns_writer_sem); |
| writer = nilfs->ns_writer; |
| if (!writer) { |
| up_read(&nilfs->ns_writer_sem); |
| return -EROFS; |
| } |
| sb = writer->s_super; |
| } |
| |
| if (wbc->sync_mode == WB_SYNC_ALL) |
| err = nilfs_construct_segment(sb); |
| else if (wbc->for_reclaim) |
| nilfs_flush_segment(sb, inode->i_ino); |
| |
| if (writer) |
| up_read(&nilfs->ns_writer_sem); |
| return err; |
| } |
| |
| |
| static const struct address_space_operations def_mdt_aops = { |
| .writepage = nilfs_mdt_write_page, |
| .sync_page = block_sync_page, |
| }; |
| |
| static const struct inode_operations def_mdt_iops; |
| static const struct file_operations def_mdt_fops; |
| |
| /* |
| * NILFS2 uses pseudo inodes for meta data files such as DAT, cpfile, sufile, |
| * ifile, or gcinodes. This allows the B-tree code and segment constructor |
| * to treat them like regular files, and this helps to simplify the |
| * implementation. |
| * On the other hand, some of the pseudo inodes have an irregular point: |
| * They don't have valid inode->i_sb pointer because their lifetimes are |
| * longer than those of the super block structs; they may continue for |
| * several consecutive mounts/umounts. This would need discussions. |
| */ |
| /** |
| * nilfs_mdt_new_common - allocate a pseudo inode for metadata file |
| * @nilfs: nilfs object |
| * @sb: super block instance the metadata file belongs to |
| * @ino: inode number |
| * @gfp_mask: gfp mask for data pages |
| * @objsz: size of the private object attached to inode->i_private |
| */ |
| struct inode * |
| nilfs_mdt_new_common(struct the_nilfs *nilfs, struct super_block *sb, |
| ino_t ino, gfp_t gfp_mask, size_t objsz) |
| { |
| struct inode *inode = nilfs_alloc_inode_common(nilfs); |
| |
| if (!inode) |
| return NULL; |
| else { |
| struct address_space * const mapping = &inode->i_data; |
| struct nilfs_mdt_info *mi; |
| |
| mi = kzalloc(max(sizeof(*mi), objsz), GFP_NOFS); |
| if (!mi) { |
| nilfs_destroy_inode(inode); |
| return NULL; |
| } |
| mi->mi_nilfs = nilfs; |
| init_rwsem(&mi->mi_sem); |
| |
| inode->i_sb = sb; /* sb may be NULL for some meta data files */ |
| inode->i_blkbits = nilfs->ns_blocksize_bits; |
| inode->i_flags = 0; |
| atomic_set(&inode->i_count, 1); |
| inode->i_nlink = 1; |
| inode->i_ino = ino; |
| inode->i_mode = S_IFREG; |
| inode->i_private = mi; |
| |
| #ifdef INIT_UNUSED_INODE_FIELDS |
| atomic_set(&inode->i_writecount, 0); |
| inode->i_size = 0; |
| inode->i_blocks = 0; |
| inode->i_bytes = 0; |
| inode->i_generation = 0; |
| #ifdef CONFIG_QUOTA |
| memset(&inode->i_dquot, 0, sizeof(inode->i_dquot)); |
| #endif |
| inode->i_pipe = NULL; |
| inode->i_bdev = NULL; |
| inode->i_cdev = NULL; |
| inode->i_rdev = 0; |
| #ifdef CONFIG_SECURITY |
| inode->i_security = NULL; |
| #endif |
| inode->dirtied_when = 0; |
| |
| INIT_LIST_HEAD(&inode->i_list); |
| INIT_LIST_HEAD(&inode->i_sb_list); |
| inode->i_state = 0; |
| #endif |
| |
| spin_lock_init(&inode->i_lock); |
| mutex_init(&inode->i_mutex); |
| init_rwsem(&inode->i_alloc_sem); |
| |
| mapping->host = NULL; /* instead of inode */ |
| mapping->flags = 0; |
| mapping_set_gfp_mask(mapping, gfp_mask); |
| mapping->assoc_mapping = NULL; |
| mapping->backing_dev_info = nilfs->ns_bdi; |
| |
| inode->i_mapping = mapping; |
| } |
| |
| return inode; |
| } |
| |
| struct inode *nilfs_mdt_new(struct the_nilfs *nilfs, struct super_block *sb, |
| ino_t ino, size_t objsz) |
| { |
| struct inode *inode; |
| |
| inode = nilfs_mdt_new_common(nilfs, sb, ino, NILFS_MDT_GFP, objsz); |
| if (!inode) |
| return NULL; |
| |
| inode->i_op = &def_mdt_iops; |
| inode->i_fop = &def_mdt_fops; |
| inode->i_mapping->a_ops = &def_mdt_aops; |
| return inode; |
| } |
| |
| void nilfs_mdt_set_entry_size(struct inode *inode, unsigned entry_size, |
| unsigned header_size) |
| { |
| struct nilfs_mdt_info *mi = NILFS_MDT(inode); |
| |
| mi->mi_entry_size = entry_size; |
| mi->mi_entries_per_block = (1 << inode->i_blkbits) / entry_size; |
| mi->mi_first_entry_offset = DIV_ROUND_UP(header_size, entry_size); |
| } |
| |
| void nilfs_mdt_set_shadow(struct inode *orig, struct inode *shadow) |
| { |
| shadow->i_mapping->assoc_mapping = orig->i_mapping; |
| NILFS_I(shadow)->i_btnode_cache.assoc_mapping = |
| &NILFS_I(orig)->i_btnode_cache; |
| } |
| |
| static void nilfs_mdt_clear(struct inode *inode) |
| { |
| struct nilfs_inode_info *ii = NILFS_I(inode); |
| |
| invalidate_mapping_pages(inode->i_mapping, 0, -1); |
| truncate_inode_pages(inode->i_mapping, 0); |
| |
| if (test_bit(NILFS_I_BMAP, &ii->i_state)) |
| nilfs_bmap_clear(ii->i_bmap); |
| nilfs_btnode_cache_clear(&ii->i_btnode_cache); |
| } |
| |
| void nilfs_mdt_destroy(struct inode *inode) |
| { |
| struct nilfs_mdt_info *mdi = NILFS_MDT(inode); |
| |
| if (mdi->mi_palloc_cache) |
| nilfs_palloc_destroy_cache(inode); |
| nilfs_mdt_clear(inode); |
| |
| kfree(mdi->mi_bgl); /* kfree(NULL) is safe */ |
| kfree(mdi); |
| nilfs_destroy_inode(inode); |
| } |