| /* |
| * linux/fs/ioctl.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| */ |
| |
| #include <linux/syscalls.h> |
| #include <linux/mm.h> |
| #include <linux/capability.h> |
| #include <linux/file.h> |
| #include <linux/fs.h> |
| #include <linux/security.h> |
| #include <linux/export.h> |
| #include <linux/uaccess.h> |
| #include <linux/writeback.h> |
| #include <linux/buffer_head.h> |
| #include <linux/falloc.h> |
| |
| #include <asm/ioctls.h> |
| |
| /* So that the fiemap access checks can't overflow on 32 bit machines. */ |
| #define FIEMAP_MAX_EXTENTS (UINT_MAX / sizeof(struct fiemap_extent)) |
| |
| /** |
| * vfs_ioctl - call filesystem specific ioctl methods |
| * @filp: open file to invoke ioctl method on |
| * @cmd: ioctl command to execute |
| * @arg: command-specific argument for ioctl |
| * |
| * Invokes filesystem specific ->unlocked_ioctl, if one exists; otherwise |
| * returns -ENOTTY. |
| * |
| * Returns 0 on success, -errno on error. |
| */ |
| static long vfs_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg) |
| { |
| int error = -ENOTTY; |
| |
| if (!filp->f_op->unlocked_ioctl) |
| goto out; |
| |
| error = filp->f_op->unlocked_ioctl(filp, cmd, arg); |
| if (error == -ENOIOCTLCMD) |
| error = -ENOTTY; |
| out: |
| return error; |
| } |
| |
| static int ioctl_fibmap(struct file *filp, int __user *p) |
| { |
| struct address_space *mapping = filp->f_mapping; |
| int res, block; |
| |
| /* do we support this mess? */ |
| if (!mapping->a_ops->bmap) |
| return -EINVAL; |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| res = get_user(block, p); |
| if (res) |
| return res; |
| res = mapping->a_ops->bmap(mapping, block); |
| return put_user(res, p); |
| } |
| |
| /** |
| * fiemap_fill_next_extent - Fiemap helper function |
| * @fieinfo: Fiemap context passed into ->fiemap |
| * @logical: Extent logical start offset, in bytes |
| * @phys: Extent physical start offset, in bytes |
| * @len: Extent length, in bytes |
| * @flags: FIEMAP_EXTENT flags that describe this extent |
| * |
| * Called from file system ->fiemap callback. Will populate extent |
| * info as passed in via arguments and copy to user memory. On |
| * success, extent count on fieinfo is incremented. |
| * |
| * Returns 0 on success, -errno on error, 1 if this was the last |
| * extent that will fit in user array. |
| */ |
| #define SET_UNKNOWN_FLAGS (FIEMAP_EXTENT_DELALLOC) |
| #define SET_NO_UNMOUNTED_IO_FLAGS (FIEMAP_EXTENT_DATA_ENCRYPTED) |
| #define SET_NOT_ALIGNED_FLAGS (FIEMAP_EXTENT_DATA_TAIL|FIEMAP_EXTENT_DATA_INLINE) |
| int fiemap_fill_next_extent(struct fiemap_extent_info *fieinfo, u64 logical, |
| u64 phys, u64 len, u32 flags) |
| { |
| struct fiemap_extent extent; |
| struct fiemap_extent __user *dest = fieinfo->fi_extents_start; |
| |
| /* only count the extents */ |
| if (fieinfo->fi_extents_max == 0) { |
| fieinfo->fi_extents_mapped++; |
| return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; |
| } |
| |
| if (fieinfo->fi_extents_mapped >= fieinfo->fi_extents_max) |
| return 1; |
| |
| if (flags & SET_UNKNOWN_FLAGS) |
| flags |= FIEMAP_EXTENT_UNKNOWN; |
| if (flags & SET_NO_UNMOUNTED_IO_FLAGS) |
| flags |= FIEMAP_EXTENT_ENCODED; |
| if (flags & SET_NOT_ALIGNED_FLAGS) |
| flags |= FIEMAP_EXTENT_NOT_ALIGNED; |
| |
| memset(&extent, 0, sizeof(extent)); |
| extent.fe_logical = logical; |
| extent.fe_physical = phys; |
| extent.fe_length = len; |
| extent.fe_flags = flags; |
| |
| dest += fieinfo->fi_extents_mapped; |
| if (copy_to_user(dest, &extent, sizeof(extent))) |
| return -EFAULT; |
| |
| fieinfo->fi_extents_mapped++; |
| if (fieinfo->fi_extents_mapped == fieinfo->fi_extents_max) |
| return 1; |
| return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; |
| } |
| EXPORT_SYMBOL(fiemap_fill_next_extent); |
| |
| /** |
| * fiemap_check_flags - check validity of requested flags for fiemap |
| * @fieinfo: Fiemap context passed into ->fiemap |
| * @fs_flags: Set of fiemap flags that the file system understands |
| * |
| * Called from file system ->fiemap callback. This will compute the |
| * intersection of valid fiemap flags and those that the fs supports. That |
| * value is then compared against the user supplied flags. In case of bad user |
| * flags, the invalid values will be written into the fieinfo structure, and |
| * -EBADR is returned, which tells ioctl_fiemap() to return those values to |
| * userspace. For this reason, a return code of -EBADR should be preserved. |
| * |
| * Returns 0 on success, -EBADR on bad flags. |
| */ |
| int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags) |
| { |
| u32 incompat_flags; |
| |
| incompat_flags = fieinfo->fi_flags & ~(FIEMAP_FLAGS_COMPAT & fs_flags); |
| if (incompat_flags) { |
| fieinfo->fi_flags = incompat_flags; |
| return -EBADR; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(fiemap_check_flags); |
| |
| static int fiemap_check_ranges(struct super_block *sb, |
| u64 start, u64 len, u64 *new_len) |
| { |
| u64 maxbytes = (u64) sb->s_maxbytes; |
| |
| *new_len = len; |
| |
| if (len == 0) |
| return -EINVAL; |
| |
| if (start > maxbytes) |
| return -EFBIG; |
| |
| /* |
| * Shrink request scope to what the fs can actually handle. |
| */ |
| if (len > maxbytes || (maxbytes - len) < start) |
| *new_len = maxbytes - start; |
| |
| return 0; |
| } |
| |
| static int ioctl_fiemap(struct file *filp, unsigned long arg) |
| { |
| struct fiemap fiemap; |
| struct fiemap __user *ufiemap = (struct fiemap __user *) arg; |
| struct fiemap_extent_info fieinfo = { 0, }; |
| struct inode *inode = file_inode(filp); |
| struct super_block *sb = inode->i_sb; |
| u64 len; |
| int error; |
| |
| if (!inode->i_op->fiemap) |
| return -EOPNOTSUPP; |
| |
| if (copy_from_user(&fiemap, ufiemap, sizeof(fiemap))) |
| return -EFAULT; |
| |
| if (fiemap.fm_extent_count > FIEMAP_MAX_EXTENTS) |
| return -EINVAL; |
| |
| error = fiemap_check_ranges(sb, fiemap.fm_start, fiemap.fm_length, |
| &len); |
| if (error) |
| return error; |
| |
| fieinfo.fi_flags = fiemap.fm_flags; |
| fieinfo.fi_extents_max = fiemap.fm_extent_count; |
| fieinfo.fi_extents_start = ufiemap->fm_extents; |
| |
| if (fiemap.fm_extent_count != 0 && |
| !access_ok(VERIFY_WRITE, fieinfo.fi_extents_start, |
| fieinfo.fi_extents_max * sizeof(struct fiemap_extent))) |
| return -EFAULT; |
| |
| if (fieinfo.fi_flags & FIEMAP_FLAG_SYNC) |
| filemap_write_and_wait(inode->i_mapping); |
| |
| error = inode->i_op->fiemap(inode, &fieinfo, fiemap.fm_start, len); |
| fiemap.fm_flags = fieinfo.fi_flags; |
| fiemap.fm_mapped_extents = fieinfo.fi_extents_mapped; |
| if (copy_to_user(ufiemap, &fiemap, sizeof(fiemap))) |
| error = -EFAULT; |
| |
| return error; |
| } |
| |
| #ifdef CONFIG_BLOCK |
| |
| static inline sector_t logical_to_blk(struct inode *inode, loff_t offset) |
| { |
| return (offset >> inode->i_blkbits); |
| } |
| |
| static inline loff_t blk_to_logical(struct inode *inode, sector_t blk) |
| { |
| return (blk << inode->i_blkbits); |
| } |
| |
| /** |
| * __generic_block_fiemap - FIEMAP for block based inodes (no locking) |
| * @inode: the inode to map |
| * @fieinfo: the fiemap info struct that will be passed back to userspace |
| * @start: where to start mapping in the inode |
| * @len: how much space to map |
| * @get_block: the fs's get_block function |
| * |
| * This does FIEMAP for block based inodes. Basically it will just loop |
| * through get_block until we hit the number of extents we want to map, or we |
| * go past the end of the file and hit a hole. |
| * |
| * If it is possible to have data blocks beyond a hole past @inode->i_size, then |
| * please do not use this function, it will stop at the first unmapped block |
| * beyond i_size. |
| * |
| * If you use this function directly, you need to do your own locking. Use |
| * generic_block_fiemap if you want the locking done for you. |
| */ |
| |
| int __generic_block_fiemap(struct inode *inode, |
| struct fiemap_extent_info *fieinfo, loff_t start, |
| loff_t len, get_block_t *get_block) |
| { |
| struct buffer_head map_bh; |
| sector_t start_blk, last_blk; |
| loff_t isize = i_size_read(inode); |
| u64 logical = 0, phys = 0, size = 0; |
| u32 flags = FIEMAP_EXTENT_MERGED; |
| bool past_eof = false, whole_file = false; |
| int ret = 0; |
| |
| ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC); |
| if (ret) |
| return ret; |
| |
| /* |
| * Either the i_mutex or other appropriate locking needs to be held |
| * since we expect isize to not change at all through the duration of |
| * this call. |
| */ |
| if (len >= isize) { |
| whole_file = true; |
| len = isize; |
| } |
| |
| /* |
| * Some filesystems can't deal with being asked to map less than |
| * blocksize, so make sure our len is at least block length. |
| */ |
| if (logical_to_blk(inode, len) == 0) |
| len = blk_to_logical(inode, 1); |
| |
| start_blk = logical_to_blk(inode, start); |
| last_blk = logical_to_blk(inode, start + len - 1); |
| |
| do { |
| /* |
| * we set b_size to the total size we want so it will map as |
| * many contiguous blocks as possible at once |
| */ |
| memset(&map_bh, 0, sizeof(struct buffer_head)); |
| map_bh.b_size = len; |
| |
| ret = get_block(inode, start_blk, &map_bh, 0); |
| if (ret) |
| break; |
| |
| /* HOLE */ |
| if (!buffer_mapped(&map_bh)) { |
| start_blk++; |
| |
| /* |
| * We want to handle the case where there is an |
| * allocated block at the front of the file, and then |
| * nothing but holes up to the end of the file properly, |
| * to make sure that extent at the front gets properly |
| * marked with FIEMAP_EXTENT_LAST |
| */ |
| if (!past_eof && |
| blk_to_logical(inode, start_blk) >= isize) |
| past_eof = 1; |
| |
| /* |
| * First hole after going past the EOF, this is our |
| * last extent |
| */ |
| if (past_eof && size) { |
| flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST; |
| ret = fiemap_fill_next_extent(fieinfo, logical, |
| phys, size, |
| flags); |
| } else if (size) { |
| ret = fiemap_fill_next_extent(fieinfo, logical, |
| phys, size, flags); |
| size = 0; |
| } |
| |
| /* if we have holes up to/past EOF then we're done */ |
| if (start_blk > last_blk || past_eof || ret) |
| break; |
| } else { |
| /* |
| * We have gone over the length of what we wanted to |
| * map, and it wasn't the entire file, so add the extent |
| * we got last time and exit. |
| * |
| * This is for the case where say we want to map all the |
| * way up to the second to the last block in a file, but |
| * the last block is a hole, making the second to last |
| * block FIEMAP_EXTENT_LAST. In this case we want to |
| * see if there is a hole after the second to last block |
| * so we can mark it properly. If we found data after |
| * we exceeded the length we were requesting, then we |
| * are good to go, just add the extent to the fieinfo |
| * and break |
| */ |
| if (start_blk > last_blk && !whole_file) { |
| ret = fiemap_fill_next_extent(fieinfo, logical, |
| phys, size, |
| flags); |
| break; |
| } |
| |
| /* |
| * if size != 0 then we know we already have an extent |
| * to add, so add it. |
| */ |
| if (size) { |
| ret = fiemap_fill_next_extent(fieinfo, logical, |
| phys, size, |
| flags); |
| if (ret) |
| break; |
| } |
| |
| logical = blk_to_logical(inode, start_blk); |
| phys = blk_to_logical(inode, map_bh.b_blocknr); |
| size = map_bh.b_size; |
| flags = FIEMAP_EXTENT_MERGED; |
| |
| start_blk += logical_to_blk(inode, size); |
| |
| /* |
| * If we are past the EOF, then we need to make sure as |
| * soon as we find a hole that the last extent we found |
| * is marked with FIEMAP_EXTENT_LAST |
| */ |
| if (!past_eof && logical + size >= isize) |
| past_eof = true; |
| } |
| cond_resched(); |
| } while (1); |
| |
| /* If ret is 1 then we just hit the end of the extent array */ |
| if (ret == 1) |
| ret = 0; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(__generic_block_fiemap); |
| |
| /** |
| * generic_block_fiemap - FIEMAP for block based inodes |
| * @inode: The inode to map |
| * @fieinfo: The mapping information |
| * @start: The initial block to map |
| * @len: The length of the extect to attempt to map |
| * @get_block: The block mapping function for the fs |
| * |
| * Calls __generic_block_fiemap to map the inode, after taking |
| * the inode's mutex lock. |
| */ |
| |
| int generic_block_fiemap(struct inode *inode, |
| struct fiemap_extent_info *fieinfo, u64 start, |
| u64 len, get_block_t *get_block) |
| { |
| int ret; |
| mutex_lock(&inode->i_mutex); |
| ret = __generic_block_fiemap(inode, fieinfo, start, len, get_block); |
| mutex_unlock(&inode->i_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(generic_block_fiemap); |
| |
| #endif /* CONFIG_BLOCK */ |
| |
| /* |
| * This provides compatibility with legacy XFS pre-allocation ioctls |
| * which predate the fallocate syscall. |
| * |
| * Only the l_start, l_len and l_whence fields of the 'struct space_resv' |
| * are used here, rest are ignored. |
| */ |
| int ioctl_preallocate(struct file *filp, void __user *argp) |
| { |
| struct inode *inode = file_inode(filp); |
| struct space_resv sr; |
| |
| if (copy_from_user(&sr, argp, sizeof(sr))) |
| return -EFAULT; |
| |
| switch (sr.l_whence) { |
| case SEEK_SET: |
| break; |
| case SEEK_CUR: |
| sr.l_start += filp->f_pos; |
| break; |
| case SEEK_END: |
| sr.l_start += i_size_read(inode); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return do_fallocate(filp, FALLOC_FL_KEEP_SIZE, sr.l_start, sr.l_len); |
| } |
| |
| static int file_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct inode *inode = file_inode(filp); |
| int __user *p = (int __user *)arg; |
| |
| switch (cmd) { |
| case FIBMAP: |
| return ioctl_fibmap(filp, p); |
| case FIONREAD: |
| return put_user(i_size_read(inode) - filp->f_pos, p); |
| case FS_IOC_RESVSP: |
| case FS_IOC_RESVSP64: |
| return ioctl_preallocate(filp, p); |
| } |
| |
| return vfs_ioctl(filp, cmd, arg); |
| } |
| |
| static int ioctl_fionbio(struct file *filp, int __user *argp) |
| { |
| unsigned int flag; |
| int on, error; |
| |
| error = get_user(on, argp); |
| if (error) |
| return error; |
| flag = O_NONBLOCK; |
| #ifdef __sparc__ |
| /* SunOS compatibility item. */ |
| if (O_NONBLOCK != O_NDELAY) |
| flag |= O_NDELAY; |
| #endif |
| spin_lock(&filp->f_lock); |
| if (on) |
| filp->f_flags |= flag; |
| else |
| filp->f_flags &= ~flag; |
| spin_unlock(&filp->f_lock); |
| return error; |
| } |
| |
| static int ioctl_fioasync(unsigned int fd, struct file *filp, |
| int __user *argp) |
| { |
| unsigned int flag; |
| int on, error; |
| |
| error = get_user(on, argp); |
| if (error) |
| return error; |
| flag = on ? FASYNC : 0; |
| |
| /* Did FASYNC state change ? */ |
| if ((flag ^ filp->f_flags) & FASYNC) { |
| if (filp->f_op->fasync) |
| /* fasync() adjusts filp->f_flags */ |
| error = filp->f_op->fasync(fd, filp, on); |
| else |
| error = -ENOTTY; |
| } |
| return error < 0 ? error : 0; |
| } |
| |
| static int ioctl_fsfreeze(struct file *filp) |
| { |
| struct super_block *sb = file_inode(filp)->i_sb; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| /* If filesystem doesn't support freeze feature, return. */ |
| if (sb->s_op->freeze_fs == NULL && sb->s_op->freeze_super == NULL) |
| return -EOPNOTSUPP; |
| |
| /* Freeze */ |
| if (sb->s_op->freeze_super) |
| return sb->s_op->freeze_super(sb); |
| return freeze_super(sb); |
| } |
| |
| static int ioctl_fsthaw(struct file *filp) |
| { |
| struct super_block *sb = file_inode(filp)->i_sb; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| /* Thaw */ |
| if (sb->s_op->thaw_super) |
| return sb->s_op->thaw_super(sb); |
| return thaw_super(sb); |
| } |
| |
| /* |
| * When you add any new common ioctls to the switches above and below |
| * please update compat_sys_ioctl() too. |
| * |
| * do_vfs_ioctl() is not for drivers and not intended to be EXPORT_SYMBOL()'d. |
| * It's just a simple helper for sys_ioctl and compat_sys_ioctl. |
| */ |
| int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, |
| unsigned long arg) |
| { |
| int error = 0; |
| int __user *argp = (int __user *)arg; |
| struct inode *inode = file_inode(filp); |
| |
| switch (cmd) { |
| case FIOCLEX: |
| set_close_on_exec(fd, 1); |
| break; |
| |
| case FIONCLEX: |
| set_close_on_exec(fd, 0); |
| break; |
| |
| case FIONBIO: |
| error = ioctl_fionbio(filp, argp); |
| break; |
| |
| case FIOASYNC: |
| error = ioctl_fioasync(fd, filp, argp); |
| break; |
| |
| case FIOQSIZE: |
| if (S_ISDIR(inode->i_mode) || S_ISREG(inode->i_mode) || |
| S_ISLNK(inode->i_mode)) { |
| loff_t res = inode_get_bytes(inode); |
| error = copy_to_user(argp, &res, sizeof(res)) ? |
| -EFAULT : 0; |
| } else |
| error = -ENOTTY; |
| break; |
| |
| case FIFREEZE: |
| error = ioctl_fsfreeze(filp); |
| break; |
| |
| case FITHAW: |
| error = ioctl_fsthaw(filp); |
| break; |
| |
| case FS_IOC_FIEMAP: |
| return ioctl_fiemap(filp, arg); |
| |
| case FIGETBSZ: |
| return put_user(inode->i_sb->s_blocksize, argp); |
| |
| default: |
| if (S_ISREG(inode->i_mode)) |
| error = file_ioctl(filp, cmd, arg); |
| else |
| error = vfs_ioctl(filp, cmd, arg); |
| break; |
| } |
| return error; |
| } |
| |
| SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd, unsigned long, arg) |
| { |
| int error; |
| struct fd f = fdget(fd); |
| |
| if (!f.file) |
| return -EBADF; |
| error = security_file_ioctl(f.file, cmd, arg); |
| if (!error) |
| error = do_vfs_ioctl(f.file, fd, cmd, arg); |
| fdput(f); |
| return error; |
| } |