| /* |
| * |
| * AVM BlueFRITZ! USB driver |
| * |
| * Copyright (C) 2003 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/skbuff.h> |
| |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| |
| #include <linux/usb.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #ifndef CONFIG_BT_HCIBFUSB_DEBUG |
| #undef BT_DBG |
| #define BT_DBG(D...) |
| #endif |
| |
| #define VERSION "1.1" |
| |
| static int ignore = 0; |
| |
| static struct usb_driver bfusb_driver; |
| |
| static struct usb_device_id bfusb_table[] = { |
| /* AVM BlueFRITZ! USB */ |
| { USB_DEVICE(0x057c, 0x2200) }, |
| |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, bfusb_table); |
| |
| |
| #define BFUSB_MAX_BLOCK_SIZE 256 |
| |
| #define BFUSB_BLOCK_TIMEOUT 3000 |
| |
| #define BFUSB_TX_PROCESS 1 |
| #define BFUSB_TX_WAKEUP 2 |
| |
| #define BFUSB_MAX_BULK_TX 2 |
| #define BFUSB_MAX_BULK_RX 2 |
| |
| struct bfusb { |
| struct hci_dev *hdev; |
| |
| unsigned long state; |
| |
| struct usb_device *udev; |
| |
| unsigned int bulk_in_ep; |
| unsigned int bulk_out_ep; |
| unsigned int bulk_pkt_size; |
| |
| rwlock_t lock; |
| |
| struct sk_buff_head transmit_q; |
| |
| struct sk_buff *reassembly; |
| |
| atomic_t pending_tx; |
| struct sk_buff_head pending_q; |
| struct sk_buff_head completed_q; |
| }; |
| |
| struct bfusb_scb { |
| struct urb *urb; |
| }; |
| |
| static void bfusb_tx_complete(struct urb *urb, struct pt_regs *regs); |
| static void bfusb_rx_complete(struct urb *urb, struct pt_regs *regs); |
| |
| static struct urb *bfusb_get_completed(struct bfusb *bfusb) |
| { |
| struct sk_buff *skb; |
| struct urb *urb = NULL; |
| |
| BT_DBG("bfusb %p", bfusb); |
| |
| skb = skb_dequeue(&bfusb->completed_q); |
| if (skb) { |
| urb = ((struct bfusb_scb *) skb->cb)->urb; |
| kfree_skb(skb); |
| } |
| |
| return urb; |
| } |
| |
| static void bfusb_unlink_urbs(struct bfusb *bfusb) |
| { |
| struct sk_buff *skb; |
| struct urb *urb; |
| |
| BT_DBG("bfusb %p", bfusb); |
| |
| while ((skb = skb_dequeue(&bfusb->pending_q))) { |
| urb = ((struct bfusb_scb *) skb->cb)->urb; |
| usb_kill_urb(urb); |
| skb_queue_tail(&bfusb->completed_q, skb); |
| } |
| |
| while ((urb = bfusb_get_completed(bfusb))) |
| usb_free_urb(urb); |
| } |
| |
| |
| static int bfusb_send_bulk(struct bfusb *bfusb, struct sk_buff *skb) |
| { |
| struct bfusb_scb *scb = (void *) skb->cb; |
| struct urb *urb = bfusb_get_completed(bfusb); |
| int err, pipe; |
| |
| BT_DBG("bfusb %p skb %p len %d", bfusb, skb, skb->len); |
| |
| if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC))) |
| return -ENOMEM; |
| |
| pipe = usb_sndbulkpipe(bfusb->udev, bfusb->bulk_out_ep); |
| |
| usb_fill_bulk_urb(urb, bfusb->udev, pipe, skb->data, skb->len, |
| bfusb_tx_complete, skb); |
| |
| scb->urb = urb; |
| |
| skb_queue_tail(&bfusb->pending_q, skb); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err) { |
| BT_ERR("%s bulk tx submit failed urb %p err %d", |
| bfusb->hdev->name, urb, err); |
| skb_unlink(skb); |
| usb_free_urb(urb); |
| } else |
| atomic_inc(&bfusb->pending_tx); |
| |
| return err; |
| } |
| |
| static void bfusb_tx_wakeup(struct bfusb *bfusb) |
| { |
| struct sk_buff *skb; |
| |
| BT_DBG("bfusb %p", bfusb); |
| |
| if (test_and_set_bit(BFUSB_TX_PROCESS, &bfusb->state)) { |
| set_bit(BFUSB_TX_WAKEUP, &bfusb->state); |
| return; |
| } |
| |
| do { |
| clear_bit(BFUSB_TX_WAKEUP, &bfusb->state); |
| |
| while ((atomic_read(&bfusb->pending_tx) < BFUSB_MAX_BULK_TX) && |
| (skb = skb_dequeue(&bfusb->transmit_q))) { |
| if (bfusb_send_bulk(bfusb, skb) < 0) { |
| skb_queue_head(&bfusb->transmit_q, skb); |
| break; |
| } |
| } |
| |
| } while (test_bit(BFUSB_TX_WAKEUP, &bfusb->state)); |
| |
| clear_bit(BFUSB_TX_PROCESS, &bfusb->state); |
| } |
| |
| static void bfusb_tx_complete(struct urb *urb, struct pt_regs *regs) |
| { |
| struct sk_buff *skb = (struct sk_buff *) urb->context; |
| struct bfusb *bfusb = (struct bfusb *) skb->dev; |
| |
| BT_DBG("bfusb %p urb %p skb %p len %d", bfusb, urb, skb, skb->len); |
| |
| atomic_dec(&bfusb->pending_tx); |
| |
| if (!test_bit(HCI_RUNNING, &bfusb->hdev->flags)) |
| return; |
| |
| if (!urb->status) |
| bfusb->hdev->stat.byte_tx += skb->len; |
| else |
| bfusb->hdev->stat.err_tx++; |
| |
| read_lock(&bfusb->lock); |
| |
| skb_unlink(skb); |
| skb_queue_tail(&bfusb->completed_q, skb); |
| |
| bfusb_tx_wakeup(bfusb); |
| |
| read_unlock(&bfusb->lock); |
| } |
| |
| |
| static int bfusb_rx_submit(struct bfusb *bfusb, struct urb *urb) |
| { |
| struct bfusb_scb *scb; |
| struct sk_buff *skb; |
| int err, pipe, size = HCI_MAX_FRAME_SIZE + 32; |
| |
| BT_DBG("bfusb %p urb %p", bfusb, urb); |
| |
| if (!urb && !(urb = usb_alloc_urb(0, GFP_ATOMIC))) |
| return -ENOMEM; |
| |
| if (!(skb = bt_skb_alloc(size, GFP_ATOMIC))) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| skb->dev = (void *) bfusb; |
| |
| scb = (struct bfusb_scb *) skb->cb; |
| scb->urb = urb; |
| |
| pipe = usb_rcvbulkpipe(bfusb->udev, bfusb->bulk_in_ep); |
| |
| usb_fill_bulk_urb(urb, bfusb->udev, pipe, skb->data, size, |
| bfusb_rx_complete, skb); |
| |
| skb_queue_tail(&bfusb->pending_q, skb); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err) { |
| BT_ERR("%s bulk rx submit failed urb %p err %d", |
| bfusb->hdev->name, urb, err); |
| skb_unlink(skb); |
| kfree_skb(skb); |
| usb_free_urb(urb); |
| } |
| |
| return err; |
| } |
| |
| static inline int bfusb_recv_block(struct bfusb *bfusb, int hdr, unsigned char *data, int len) |
| { |
| BT_DBG("bfusb %p hdr 0x%02x data %p len %d", bfusb, hdr, data, len); |
| |
| if (hdr & 0x10) { |
| BT_ERR("%s error in block", bfusb->hdev->name); |
| if (bfusb->reassembly) |
| kfree_skb(bfusb->reassembly); |
| bfusb->reassembly = NULL; |
| return -EIO; |
| } |
| |
| if (hdr & 0x04) { |
| struct sk_buff *skb; |
| unsigned char pkt_type; |
| int pkt_len = 0; |
| |
| if (bfusb->reassembly) { |
| BT_ERR("%s unexpected start block", bfusb->hdev->name); |
| kfree_skb(bfusb->reassembly); |
| bfusb->reassembly = NULL; |
| } |
| |
| if (len < 1) { |
| BT_ERR("%s no packet type found", bfusb->hdev->name); |
| return -EPROTO; |
| } |
| |
| pkt_type = *data++; len--; |
| |
| switch (pkt_type) { |
| case HCI_EVENT_PKT: |
| if (len >= HCI_EVENT_HDR_SIZE) { |
| struct hci_event_hdr *hdr = (struct hci_event_hdr *) data; |
| pkt_len = HCI_EVENT_HDR_SIZE + hdr->plen; |
| } else { |
| BT_ERR("%s event block is too short", bfusb->hdev->name); |
| return -EILSEQ; |
| } |
| break; |
| |
| case HCI_ACLDATA_PKT: |
| if (len >= HCI_ACL_HDR_SIZE) { |
| struct hci_acl_hdr *hdr = (struct hci_acl_hdr *) data; |
| pkt_len = HCI_ACL_HDR_SIZE + __le16_to_cpu(hdr->dlen); |
| } else { |
| BT_ERR("%s data block is too short", bfusb->hdev->name); |
| return -EILSEQ; |
| } |
| break; |
| |
| case HCI_SCODATA_PKT: |
| if (len >= HCI_SCO_HDR_SIZE) { |
| struct hci_sco_hdr *hdr = (struct hci_sco_hdr *) data; |
| pkt_len = HCI_SCO_HDR_SIZE + hdr->dlen; |
| } else { |
| BT_ERR("%s audio block is too short", bfusb->hdev->name); |
| return -EILSEQ; |
| } |
| break; |
| } |
| |
| skb = bt_skb_alloc(pkt_len, GFP_ATOMIC); |
| if (!skb) { |
| BT_ERR("%s no memory for the packet", bfusb->hdev->name); |
| return -ENOMEM; |
| } |
| |
| skb->dev = (void *) bfusb->hdev; |
| skb->pkt_type = pkt_type; |
| |
| bfusb->reassembly = skb; |
| } else { |
| if (!bfusb->reassembly) { |
| BT_ERR("%s unexpected continuation block", bfusb->hdev->name); |
| return -EIO; |
| } |
| } |
| |
| if (len > 0) |
| memcpy(skb_put(bfusb->reassembly, len), data, len); |
| |
| if (hdr & 0x08) { |
| hci_recv_frame(bfusb->reassembly); |
| bfusb->reassembly = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static void bfusb_rx_complete(struct urb *urb, struct pt_regs *regs) |
| { |
| struct sk_buff *skb = (struct sk_buff *) urb->context; |
| struct bfusb *bfusb = (struct bfusb *) skb->dev; |
| unsigned char *buf = urb->transfer_buffer; |
| int count = urb->actual_length; |
| int err, hdr, len; |
| |
| BT_DBG("bfusb %p urb %p skb %p len %d", bfusb, urb, skb, skb->len); |
| |
| read_lock(&bfusb->lock); |
| |
| if (!test_bit(HCI_RUNNING, &bfusb->hdev->flags)) |
| goto unlock; |
| |
| if (urb->status || !count) |
| goto resubmit; |
| |
| bfusb->hdev->stat.byte_rx += count; |
| |
| skb_put(skb, count); |
| |
| while (count) { |
| hdr = buf[0] | (buf[1] << 8); |
| |
| if (hdr & 0x4000) { |
| len = 0; |
| count -= 2; |
| buf += 2; |
| } else { |
| len = (buf[2] == 0) ? 256 : buf[2]; |
| count -= 3; |
| buf += 3; |
| } |
| |
| if (count < len) { |
| BT_ERR("%s block extends over URB buffer ranges", |
| bfusb->hdev->name); |
| } |
| |
| if ((hdr & 0xe1) == 0xc1) |
| bfusb_recv_block(bfusb, hdr, buf, len); |
| |
| count -= len; |
| buf += len; |
| } |
| |
| skb_unlink(skb); |
| kfree_skb(skb); |
| |
| bfusb_rx_submit(bfusb, urb); |
| |
| read_unlock(&bfusb->lock); |
| |
| return; |
| |
| resubmit: |
| urb->dev = bfusb->udev; |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err) { |
| BT_ERR("%s bulk resubmit failed urb %p err %d", |
| bfusb->hdev->name, urb, err); |
| } |
| |
| unlock: |
| read_unlock(&bfusb->lock); |
| } |
| |
| |
| static int bfusb_open(struct hci_dev *hdev) |
| { |
| struct bfusb *bfusb = (struct bfusb *) hdev->driver_data; |
| unsigned long flags; |
| int i, err; |
| |
| BT_DBG("hdev %p bfusb %p", hdev, bfusb); |
| |
| if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) |
| return 0; |
| |
| write_lock_irqsave(&bfusb->lock, flags); |
| |
| err = bfusb_rx_submit(bfusb, NULL); |
| if (!err) { |
| for (i = 1; i < BFUSB_MAX_BULK_RX; i++) |
| bfusb_rx_submit(bfusb, NULL); |
| } else { |
| clear_bit(HCI_RUNNING, &hdev->flags); |
| } |
| |
| write_unlock_irqrestore(&bfusb->lock, flags); |
| |
| return err; |
| } |
| |
| static int bfusb_flush(struct hci_dev *hdev) |
| { |
| struct bfusb *bfusb = (struct bfusb *) hdev->driver_data; |
| |
| BT_DBG("hdev %p bfusb %p", hdev, bfusb); |
| |
| skb_queue_purge(&bfusb->transmit_q); |
| |
| return 0; |
| } |
| |
| static int bfusb_close(struct hci_dev *hdev) |
| { |
| struct bfusb *bfusb = (struct bfusb *) hdev->driver_data; |
| unsigned long flags; |
| |
| BT_DBG("hdev %p bfusb %p", hdev, bfusb); |
| |
| if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) |
| return 0; |
| |
| write_lock_irqsave(&bfusb->lock, flags); |
| write_unlock_irqrestore(&bfusb->lock, flags); |
| |
| bfusb_unlink_urbs(bfusb); |
| bfusb_flush(hdev); |
| |
| return 0; |
| } |
| |
| static int bfusb_send_frame(struct sk_buff *skb) |
| { |
| struct hci_dev *hdev = (struct hci_dev *) skb->dev; |
| struct bfusb *bfusb; |
| struct sk_buff *nskb; |
| unsigned char buf[3]; |
| int sent = 0, size, count; |
| |
| BT_DBG("hdev %p skb %p type %d len %d", hdev, skb, skb->pkt_type, skb->len); |
| |
| if (!hdev) { |
| BT_ERR("Frame for unknown HCI device (hdev=NULL)"); |
| return -ENODEV; |
| } |
| |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) |
| return -EBUSY; |
| |
| bfusb = (struct bfusb *) hdev->driver_data; |
| |
| switch (skb->pkt_type) { |
| case HCI_COMMAND_PKT: |
| hdev->stat.cmd_tx++; |
| break; |
| case HCI_ACLDATA_PKT: |
| hdev->stat.acl_tx++; |
| break; |
| case HCI_SCODATA_PKT: |
| hdev->stat.sco_tx++; |
| break; |
| }; |
| |
| /* Prepend skb with frame type */ |
| memcpy(skb_push(skb, 1), &(skb->pkt_type), 1); |
| |
| count = skb->len; |
| |
| /* Max HCI frame size seems to be 1511 + 1 */ |
| if (!(nskb = bt_skb_alloc(count + 32, GFP_ATOMIC))) { |
| BT_ERR("Can't allocate memory for new packet"); |
| return -ENOMEM; |
| } |
| |
| nskb->dev = (void *) bfusb; |
| |
| while (count) { |
| size = min_t(uint, count, BFUSB_MAX_BLOCK_SIZE); |
| |
| buf[0] = 0xc1 | ((sent == 0) ? 0x04 : 0) | ((count == size) ? 0x08 : 0); |
| buf[1] = 0x00; |
| buf[2] = (size == BFUSB_MAX_BLOCK_SIZE) ? 0 : size; |
| |
| memcpy(skb_put(nskb, 3), buf, 3); |
| memcpy(skb_put(nskb, size), skb->data + sent, size); |
| |
| sent += size; |
| count -= size; |
| } |
| |
| /* Don't send frame with multiple size of bulk max packet */ |
| if ((nskb->len % bfusb->bulk_pkt_size) == 0) { |
| buf[0] = 0xdd; |
| buf[1] = 0x00; |
| memcpy(skb_put(nskb, 2), buf, 2); |
| } |
| |
| read_lock(&bfusb->lock); |
| |
| skb_queue_tail(&bfusb->transmit_q, nskb); |
| bfusb_tx_wakeup(bfusb); |
| |
| read_unlock(&bfusb->lock); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static void bfusb_destruct(struct hci_dev *hdev) |
| { |
| struct bfusb *bfusb = (struct bfusb *) hdev->driver_data; |
| |
| BT_DBG("hdev %p bfusb %p", hdev, bfusb); |
| |
| kfree(bfusb); |
| } |
| |
| static int bfusb_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg) |
| { |
| return -ENOIOCTLCMD; |
| } |
| |
| |
| static int bfusb_load_firmware(struct bfusb *bfusb, unsigned char *firmware, int count) |
| { |
| unsigned char *buf; |
| int err, pipe, len, size, sent = 0; |
| |
| BT_DBG("bfusb %p udev %p", bfusb, bfusb->udev); |
| |
| BT_INFO("BlueFRITZ! USB loading firmware"); |
| |
| pipe = usb_sndctrlpipe(bfusb->udev, 0); |
| |
| if (usb_control_msg(bfusb->udev, pipe, USB_REQ_SET_CONFIGURATION, |
| 0, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT) < 0) { |
| BT_ERR("Can't change to loading configuration"); |
| return -EBUSY; |
| } |
| |
| bfusb->udev->toggle[0] = bfusb->udev->toggle[1] = 0; |
| |
| buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_ATOMIC); |
| if (!buf) { |
| BT_ERR("Can't allocate memory chunk for firmware"); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_sndbulkpipe(bfusb->udev, bfusb->bulk_out_ep); |
| |
| while (count) { |
| size = min_t(uint, count, BFUSB_MAX_BLOCK_SIZE + 3); |
| |
| memcpy(buf, firmware + sent, size); |
| |
| err = usb_bulk_msg(bfusb->udev, pipe, buf, size, |
| &len, BFUSB_BLOCK_TIMEOUT); |
| |
| if (err || (len != size)) { |
| BT_ERR("Error in firmware loading"); |
| goto error; |
| } |
| |
| sent += size; |
| count -= size; |
| } |
| |
| if ((err = usb_bulk_msg(bfusb->udev, pipe, NULL, 0, |
| &len, BFUSB_BLOCK_TIMEOUT)) < 0) { |
| BT_ERR("Error in null packet request"); |
| goto error; |
| } |
| |
| pipe = usb_sndctrlpipe(bfusb->udev, 0); |
| |
| if ((err = usb_control_msg(bfusb->udev, pipe, USB_REQ_SET_CONFIGURATION, |
| 0, 2, 0, NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) { |
| BT_ERR("Can't change to running configuration"); |
| goto error; |
| } |
| |
| bfusb->udev->toggle[0] = bfusb->udev->toggle[1] = 0; |
| |
| BT_INFO("BlueFRITZ! USB device ready"); |
| |
| kfree(buf); |
| return 0; |
| |
| error: |
| kfree(buf); |
| |
| pipe = usb_sndctrlpipe(bfusb->udev, 0); |
| |
| usb_control_msg(bfusb->udev, pipe, USB_REQ_SET_CONFIGURATION, |
| 0, 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); |
| |
| return err; |
| } |
| |
| static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| const struct firmware *firmware; |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct usb_host_endpoint *bulk_out_ep; |
| struct usb_host_endpoint *bulk_in_ep; |
| struct hci_dev *hdev; |
| struct bfusb *bfusb; |
| |
| BT_DBG("intf %p id %p", intf, id); |
| |
| if (ignore) |
| return -ENODEV; |
| |
| /* Check number of endpoints */ |
| if (intf->cur_altsetting->desc.bNumEndpoints < 2) |
| return -EIO; |
| |
| bulk_out_ep = &intf->cur_altsetting->endpoint[0]; |
| bulk_in_ep = &intf->cur_altsetting->endpoint[1]; |
| |
| if (!bulk_out_ep || !bulk_in_ep) { |
| BT_ERR("Bulk endpoints not found"); |
| goto done; |
| } |
| |
| /* Initialize control structure and load firmware */ |
| if (!(bfusb = kmalloc(sizeof(struct bfusb), GFP_KERNEL))) { |
| BT_ERR("Can't allocate memory for control structure"); |
| goto done; |
| } |
| |
| memset(bfusb, 0, sizeof(struct bfusb)); |
| |
| bfusb->udev = udev; |
| bfusb->bulk_in_ep = bulk_in_ep->desc.bEndpointAddress; |
| bfusb->bulk_out_ep = bulk_out_ep->desc.bEndpointAddress; |
| bfusb->bulk_pkt_size = le16_to_cpu(bulk_out_ep->desc.wMaxPacketSize); |
| |
| rwlock_init(&bfusb->lock); |
| |
| bfusb->reassembly = NULL; |
| |
| skb_queue_head_init(&bfusb->transmit_q); |
| skb_queue_head_init(&bfusb->pending_q); |
| skb_queue_head_init(&bfusb->completed_q); |
| |
| if (request_firmware(&firmware, "bfubase.frm", &udev->dev) < 0) { |
| BT_ERR("Firmware request failed"); |
| goto error; |
| } |
| |
| BT_DBG("firmware data %p size %d", firmware->data, firmware->size); |
| |
| if (bfusb_load_firmware(bfusb, firmware->data, firmware->size) < 0) { |
| BT_ERR("Firmware loading failed"); |
| goto release; |
| } |
| |
| release_firmware(firmware); |
| |
| /* Initialize and register HCI device */ |
| hdev = hci_alloc_dev(); |
| if (!hdev) { |
| BT_ERR("Can't allocate HCI device"); |
| goto error; |
| } |
| |
| bfusb->hdev = hdev; |
| |
| hdev->type = HCI_USB; |
| hdev->driver_data = bfusb; |
| SET_HCIDEV_DEV(hdev, &intf->dev); |
| |
| hdev->open = bfusb_open; |
| hdev->close = bfusb_close; |
| hdev->flush = bfusb_flush; |
| hdev->send = bfusb_send_frame; |
| hdev->destruct = bfusb_destruct; |
| hdev->ioctl = bfusb_ioctl; |
| |
| hdev->owner = THIS_MODULE; |
| |
| if (hci_register_dev(hdev) < 0) { |
| BT_ERR("Can't register HCI device"); |
| hci_free_dev(hdev); |
| goto error; |
| } |
| |
| usb_set_intfdata(intf, bfusb); |
| |
| return 0; |
| |
| release: |
| release_firmware(firmware); |
| |
| error: |
| kfree(bfusb); |
| |
| done: |
| return -EIO; |
| } |
| |
| static void bfusb_disconnect(struct usb_interface *intf) |
| { |
| struct bfusb *bfusb = usb_get_intfdata(intf); |
| struct hci_dev *hdev = bfusb->hdev; |
| |
| BT_DBG("intf %p", intf); |
| |
| if (!hdev) |
| return; |
| |
| usb_set_intfdata(intf, NULL); |
| |
| bfusb_close(hdev); |
| |
| if (hci_unregister_dev(hdev) < 0) |
| BT_ERR("Can't unregister HCI device %s", hdev->name); |
| |
| hci_free_dev(hdev); |
| } |
| |
| static struct usb_driver bfusb_driver = { |
| .owner = THIS_MODULE, |
| .name = "bfusb", |
| .probe = bfusb_probe, |
| .disconnect = bfusb_disconnect, |
| .id_table = bfusb_table, |
| }; |
| |
| static int __init bfusb_init(void) |
| { |
| int err; |
| |
| BT_INFO("BlueFRITZ! USB driver ver %s", VERSION); |
| |
| if ((err = usb_register(&bfusb_driver)) < 0) |
| BT_ERR("Failed to register BlueFRITZ! USB driver"); |
| |
| return err; |
| } |
| |
| static void __exit bfusb_exit(void) |
| { |
| usb_deregister(&bfusb_driver); |
| } |
| |
| module_init(bfusb_init); |
| module_exit(bfusb_exit); |
| |
| module_param(ignore, bool, 0644); |
| MODULE_PARM_DESC(ignore, "Ignore devices from the matching table"); |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("BlueFRITZ! USB driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |