USB: Phidgets should check create_device_file() return value
device_create_file() could fail, add proper error paths for this condition.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
index 66be951..7163f05 100644
--- a/drivers/usb/misc/phidgetservo.c
+++ b/drivers/usb/misc/phidgetservo.c
@@ -1,7 +1,7 @@
/*
* USB PhidgetServo driver 1.0
*
- * Copyright (C) 2004 Sean Young <sean@mess.org>
+ * Copyright (C) 2004, 2006 Sean Young <sean@mess.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -235,86 +235,108 @@
\
return sprintf(buf, "%d.%02d\n", servo->degrees[value], \
servo->minutes[value]); \
-} \
-static DEVICE_ATTR(servo##value, S_IWUGO | S_IRUGO, \
- show_servo##value, set_servo##value);
+}
+#define servo_attr(value) \
+ __ATTR(servo##value, S_IWUGO | S_IRUGO, \
+ show_servo##value, set_servo##value)
show_set(0);
show_set(1);
show_set(2);
show_set(3);
+static struct device_attribute dev_attrs[] = {
+ servo_attr(0), servo_attr(1), servo_attr(2), servo_attr(3)
+};
+
static int
servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct phidget_servo *dev;
- int bit, value;
+ int bit, value, rc;
+ int servo_count, i;
dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto out;
}
dev->udev = usb_get_dev(udev);
dev->type = id->driver_info;
+ dev->dev_no = -1;
usb_set_intfdata(interface, dev);
do {
bit = find_first_zero_bit(&device_no, sizeof(device_no));
value = test_and_set_bit(bit, &device_no);
- } while(value);
+ } while (value);
dev->dev_no = bit;
dev->dev = device_create(phidget_class, &dev->udev->dev, 0,
"servo%d", dev->dev_no);
if (IS_ERR(dev->dev)) {
- int rc = PTR_ERR(dev->dev);
- clear_bit(dev->dev_no, &device_no);
- kfree(dev);
- return rc;
+ rc = PTR_ERR(dev->dev);
+ dev->dev = NULL;
+ goto out;
}
- device_create_file(dev->dev, &dev_attr_servo0);
- if (dev->type & SERVO_COUNT_QUAD) {
- device_create_file(dev->dev, &dev_attr_servo1);
- device_create_file(dev->dev, &dev_attr_servo2);
- device_create_file(dev->dev, &dev_attr_servo3);
+ servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
+
+ for (i=0; i<servo_count; i++) {
+ rc = device_create_file(dev->dev, &dev_attrs[i]);
+ if (rc)
+ goto out2;
}
dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n",
- dev->type & SERVO_COUNT_QUAD ? 4 : 1,
- dev->type & SERVO_VERSION_30 ? 3 : 2);
+ servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
if (!(dev->type & SERVO_VERSION_30))
dev_info(&interface->dev,
"WARNING: v2.0 not tested! Please report if it works.\n");
return 0;
+out2:
+ while (i-- > 0)
+ device_remove_file(dev->dev, &dev_attrs[i]);
+out:
+ if (dev) {
+ if (dev->dev)
+ device_unregister(dev->dev);
+ if (dev->dev_no >= 0)
+ clear_bit(dev->dev_no, &device_no);
+
+ kfree(dev);
+ }
+
+ return rc;
}
static void
servo_disconnect(struct usb_interface *interface)
{
struct phidget_servo *dev;
+ int servo_count, i;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
- device_remove_file(dev->dev, &dev_attr_servo0);
- if (dev->type & SERVO_COUNT_QUAD) {
- device_remove_file(dev->dev, &dev_attr_servo1);
- device_remove_file(dev->dev, &dev_attr_servo2);
- device_remove_file(dev->dev, &dev_attr_servo3);
- }
+ if (!dev)
+ return;
+
+ servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
+
+ for (i=0; i<servo_count; i++)
+ device_remove_file(dev->dev, &dev_attrs[i]);
device_unregister(dev->dev);
usb_put_dev(dev->udev);
dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n",
- dev->type & SERVO_COUNT_QUAD ? 4 : 1,
- dev->type & SERVO_VERSION_30 ? 3 : 2);
+ servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
clear_bit(dev->dev_no, &device_no);
kfree(dev);