| /* |
| * Real Time Clock driver for Wolfson Microelectronics WM831x |
| * |
| * Copyright (C) 2009 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/time.h> |
| #include <linux/rtc.h> |
| #include <linux/slab.h> |
| #include <linux/bcd.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioctl.h> |
| #include <linux/completion.h> |
| #include <linux/mfd/wm831x/core.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| |
| |
| /* |
| * R16416 (0x4020) - RTC Write Counter |
| */ |
| #define WM831X_RTC_WR_CNT_MASK 0xFFFF /* RTC_WR_CNT - [15:0] */ |
| #define WM831X_RTC_WR_CNT_SHIFT 0 /* RTC_WR_CNT - [15:0] */ |
| #define WM831X_RTC_WR_CNT_WIDTH 16 /* RTC_WR_CNT - [15:0] */ |
| |
| /* |
| * R16417 (0x4021) - RTC Time 1 |
| */ |
| #define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */ |
| #define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */ |
| #define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */ |
| |
| /* |
| * R16418 (0x4022) - RTC Time 2 |
| */ |
| #define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */ |
| #define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */ |
| #define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */ |
| |
| /* |
| * R16419 (0x4023) - RTC Alarm 1 |
| */ |
| #define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */ |
| #define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */ |
| #define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */ |
| |
| /* |
| * R16420 (0x4024) - RTC Alarm 2 |
| */ |
| #define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */ |
| #define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */ |
| #define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */ |
| |
| /* |
| * R16421 (0x4025) - RTC Control |
| */ |
| #define WM831X_RTC_VALID 0x8000 /* RTC_VALID */ |
| #define WM831X_RTC_VALID_MASK 0x8000 /* RTC_VALID */ |
| #define WM831X_RTC_VALID_SHIFT 15 /* RTC_VALID */ |
| #define WM831X_RTC_VALID_WIDTH 1 /* RTC_VALID */ |
| #define WM831X_RTC_SYNC_BUSY 0x4000 /* RTC_SYNC_BUSY */ |
| #define WM831X_RTC_SYNC_BUSY_MASK 0x4000 /* RTC_SYNC_BUSY */ |
| #define WM831X_RTC_SYNC_BUSY_SHIFT 14 /* RTC_SYNC_BUSY */ |
| #define WM831X_RTC_SYNC_BUSY_WIDTH 1 /* RTC_SYNC_BUSY */ |
| #define WM831X_RTC_ALM_ENA 0x0400 /* RTC_ALM_ENA */ |
| #define WM831X_RTC_ALM_ENA_MASK 0x0400 /* RTC_ALM_ENA */ |
| #define WM831X_RTC_ALM_ENA_SHIFT 10 /* RTC_ALM_ENA */ |
| #define WM831X_RTC_ALM_ENA_WIDTH 1 /* RTC_ALM_ENA */ |
| #define WM831X_RTC_PINT_FREQ_MASK 0x0070 /* RTC_PINT_FREQ - [6:4] */ |
| #define WM831X_RTC_PINT_FREQ_SHIFT 4 /* RTC_PINT_FREQ - [6:4] */ |
| #define WM831X_RTC_PINT_FREQ_WIDTH 3 /* RTC_PINT_FREQ - [6:4] */ |
| |
| /* |
| * R16422 (0x4026) - RTC Trim |
| */ |
| #define WM831X_RTC_TRIM_MASK 0x03FF /* RTC_TRIM - [9:0] */ |
| #define WM831X_RTC_TRIM_SHIFT 0 /* RTC_TRIM - [9:0] */ |
| #define WM831X_RTC_TRIM_WIDTH 10 /* RTC_TRIM - [9:0] */ |
| |
| #define WM831X_SET_TIME_RETRIES 5 |
| #define WM831X_GET_TIME_RETRIES 5 |
| |
| struct wm831x_rtc { |
| struct wm831x *wm831x; |
| struct rtc_device *rtc; |
| unsigned int alarm_enabled:1; |
| }; |
| |
| /* |
| * Read current time and date in RTC |
| */ |
| static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm) |
| { |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); |
| struct wm831x *wm831x = wm831x_rtc->wm831x; |
| u16 time1[2], time2[2]; |
| int ret; |
| int count = 0; |
| |
| /* Has the RTC been programmed? */ |
| ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read RTC control: %d\n", ret); |
| return ret; |
| } |
| if (!(ret & WM831X_RTC_VALID)) { |
| dev_dbg(dev, "RTC not yet configured\n"); |
| return -EINVAL; |
| } |
| |
| /* Read twice to make sure we don't read a corrupt, partially |
| * incremented, value. |
| */ |
| do { |
| ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1, |
| 2, time1); |
| if (ret != 0) |
| continue; |
| |
| ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1, |
| 2, time2); |
| if (ret != 0) |
| continue; |
| |
| if (memcmp(time1, time2, sizeof(time1)) == 0) { |
| u32 time = (time1[0] << 16) | time1[1]; |
| |
| rtc_time_to_tm(time, tm); |
| return rtc_valid_tm(tm); |
| } |
| |
| } while (++count < WM831X_GET_TIME_RETRIES); |
| |
| dev_err(dev, "Timed out reading current time\n"); |
| |
| return -EIO; |
| } |
| |
| /* |
| * Set current time and date in RTC |
| */ |
| static int wm831x_rtc_set_mmss(struct device *dev, unsigned long time) |
| { |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); |
| struct wm831x *wm831x = wm831x_rtc->wm831x; |
| struct rtc_time new_tm; |
| unsigned long new_time; |
| int ret; |
| int count = 0; |
| |
| ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1, |
| (time >> 16) & 0xffff); |
| if (ret < 0) { |
| dev_err(dev, "Failed to write TIME_1: %d\n", ret); |
| return ret; |
| } |
| |
| ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff); |
| if (ret < 0) { |
| dev_err(dev, "Failed to write TIME_2: %d\n", ret); |
| return ret; |
| } |
| |
| /* Wait for the update to complete - should happen first time |
| * round but be conservative. |
| */ |
| do { |
| msleep(1); |
| |
| ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); |
| if (ret < 0) |
| ret = WM831X_RTC_SYNC_BUSY; |
| } while (!(ret & WM831X_RTC_SYNC_BUSY) && |
| ++count < WM831X_SET_TIME_RETRIES); |
| |
| if (ret & WM831X_RTC_SYNC_BUSY) { |
| dev_err(dev, "Timed out writing RTC update\n"); |
| return -EIO; |
| } |
| |
| /* Check that the update was accepted; security features may |
| * have caused the update to be ignored. |
| */ |
| ret = wm831x_rtc_readtime(dev, &new_tm); |
| if (ret < 0) |
| return ret; |
| |
| ret = rtc_tm_to_time(&new_tm, &new_time); |
| if (ret < 0) { |
| dev_err(dev, "Failed to convert time: %d\n", ret); |
| return ret; |
| } |
| |
| /* Allow a second of change in case of tick */ |
| if (new_time - time > 1) { |
| dev_err(dev, "RTC update not permitted by hardware\n"); |
| return -EPERM; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Read alarm time and date in RTC |
| */ |
| static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); |
| int ret; |
| u16 data[2]; |
| u32 time; |
| |
| ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1, |
| 2, data); |
| if (ret != 0) { |
| dev_err(dev, "Failed to read alarm time: %d\n", ret); |
| return ret; |
| } |
| |
| time = (data[0] << 16) | data[1]; |
| |
| rtc_time_to_tm(time, &alrm->time); |
| |
| ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read RTC control: %d\n", ret); |
| return ret; |
| } |
| |
| if (ret & WM831X_RTC_ALM_ENA) |
| alrm->enabled = 1; |
| else |
| alrm->enabled = 0; |
| |
| return 0; |
| } |
| |
| static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc) |
| { |
| wm831x_rtc->alarm_enabled = 0; |
| |
| return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, |
| WM831X_RTC_ALM_ENA, 0); |
| } |
| |
| static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc) |
| { |
| wm831x_rtc->alarm_enabled = 1; |
| |
| return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, |
| WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA); |
| } |
| |
| static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); |
| struct wm831x *wm831x = wm831x_rtc->wm831x; |
| int ret; |
| unsigned long time; |
| |
| ret = rtc_tm_to_time(&alrm->time, &time); |
| if (ret < 0) { |
| dev_err(dev, "Failed to convert time: %d\n", ret); |
| return ret; |
| } |
| |
| ret = wm831x_rtc_stop_alarm(wm831x_rtc); |
| if (ret < 0) { |
| dev_err(dev, "Failed to stop alarm: %d\n", ret); |
| return ret; |
| } |
| |
| ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1, |
| (time >> 16) & 0xffff); |
| if (ret < 0) { |
| dev_err(dev, "Failed to write ALARM_1: %d\n", ret); |
| return ret; |
| } |
| |
| ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff); |
| if (ret < 0) { |
| dev_err(dev, "Failed to write ALARM_2: %d\n", ret); |
| return ret; |
| } |
| |
| if (alrm->enabled) { |
| ret = wm831x_rtc_start_alarm(wm831x_rtc); |
| if (ret < 0) { |
| dev_err(dev, "Failed to start alarm: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int wm831x_rtc_alarm_irq_enable(struct device *dev, |
| unsigned int enabled) |
| { |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev); |
| |
| if (enabled) |
| return wm831x_rtc_start_alarm(wm831x_rtc); |
| else |
| return wm831x_rtc_stop_alarm(wm831x_rtc); |
| } |
| |
| static irqreturn_t wm831x_alm_irq(int irq, void *data) |
| { |
| struct wm831x_rtc *wm831x_rtc = data; |
| |
| rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops wm831x_rtc_ops = { |
| .read_time = wm831x_rtc_readtime, |
| .set_mmss = wm831x_rtc_set_mmss, |
| .read_alarm = wm831x_rtc_readalarm, |
| .set_alarm = wm831x_rtc_setalarm, |
| .alarm_irq_enable = wm831x_rtc_alarm_irq_enable, |
| }; |
| |
| #ifdef CONFIG_PM |
| /* Turn off the alarm if it should not be a wake source. */ |
| static int wm831x_rtc_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); |
| int ret, enable; |
| |
| if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev)) |
| enable = WM831X_RTC_ALM_ENA; |
| else |
| enable = 0; |
| |
| ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, |
| WM831X_RTC_ALM_ENA, enable); |
| if (ret != 0) |
| dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret); |
| |
| return 0; |
| } |
| |
| /* Enable the alarm if it should be enabled (in case it was disabled to |
| * prevent use as a wake source). |
| */ |
| static int wm831x_rtc_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); |
| int ret; |
| |
| if (wm831x_rtc->alarm_enabled) { |
| ret = wm831x_rtc_start_alarm(wm831x_rtc); |
| if (ret != 0) |
| dev_err(&pdev->dev, |
| "Failed to restart RTC alarm: %d\n", ret); |
| } |
| |
| return 0; |
| } |
| |
| /* Unconditionally disable the alarm */ |
| static int wm831x_rtc_freeze(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev); |
| int ret; |
| |
| ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL, |
| WM831X_RTC_ALM_ENA, 0); |
| if (ret != 0) |
| dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret); |
| |
| return 0; |
| } |
| #else |
| #define wm831x_rtc_suspend NULL |
| #define wm831x_rtc_resume NULL |
| #define wm831x_rtc_freeze NULL |
| #endif |
| |
| static int wm831x_rtc_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_rtc *wm831x_rtc; |
| int alm_irq = platform_get_irq_byname(pdev, "ALM"); |
| int ret = 0; |
| |
| wm831x_rtc = devm_kzalloc(&pdev->dev, sizeof(*wm831x_rtc), GFP_KERNEL); |
| if (wm831x_rtc == NULL) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, wm831x_rtc); |
| wm831x_rtc->wm831x = wm831x; |
| |
| ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret); |
| goto err; |
| } |
| if (ret & WM831X_RTC_ALM_ENA) |
| wm831x_rtc->alarm_enabled = 1; |
| |
| device_init_wakeup(&pdev->dev, 1); |
| |
| wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev, |
| &wm831x_rtc_ops, THIS_MODULE); |
| if (IS_ERR(wm831x_rtc->rtc)) { |
| ret = PTR_ERR(wm831x_rtc->rtc); |
| goto err; |
| } |
| |
| ret = request_threaded_irq(alm_irq, NULL, wm831x_alm_irq, |
| IRQF_TRIGGER_RISING, "RTC alarm", |
| wm831x_rtc); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n", |
| alm_irq, ret); |
| } |
| |
| return 0; |
| |
| err: |
| return ret; |
| } |
| |
| static int __devexit wm831x_rtc_remove(struct platform_device *pdev) |
| { |
| struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev); |
| int alm_irq = platform_get_irq_byname(pdev, "ALM"); |
| |
| free_irq(alm_irq, wm831x_rtc); |
| rtc_device_unregister(wm831x_rtc->rtc); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops wm831x_rtc_pm_ops = { |
| .suspend = wm831x_rtc_suspend, |
| .resume = wm831x_rtc_resume, |
| |
| .freeze = wm831x_rtc_freeze, |
| .thaw = wm831x_rtc_resume, |
| .restore = wm831x_rtc_resume, |
| |
| .poweroff = wm831x_rtc_suspend, |
| }; |
| |
| static struct platform_driver wm831x_rtc_driver = { |
| .probe = wm831x_rtc_probe, |
| .remove = __devexit_p(wm831x_rtc_remove), |
| .driver = { |
| .name = "wm831x-rtc", |
| .pm = &wm831x_rtc_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(wm831x_rtc_driver); |
| |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm831x-rtc"); |