| /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/sysrq.h> |
| #include <linux/slab.h> |
| #include "drmP.h" |
| #include "drm.h" |
| #include "i915_drm.h" |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| |
| /* For display hotplug interrupt */ |
| static void |
| ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask & mask) != 0) { |
| dev_priv->irq_mask &= ~mask; |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| POSTING_READ(DEIMR); |
| } |
| } |
| |
| static inline void |
| ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask & mask) != mask) { |
| dev_priv->irq_mask |= mask; |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| POSTING_READ(DEIMR); |
| } |
| } |
| |
| void |
| i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) |
| { |
| if ((dev_priv->pipestat[pipe] & mask) != mask) { |
| u32 reg = PIPESTAT(pipe); |
| |
| dev_priv->pipestat[pipe] |= mask; |
| /* Enable the interrupt, clear any pending status */ |
| I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16)); |
| POSTING_READ(reg); |
| } |
| } |
| |
| void |
| i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) |
| { |
| if ((dev_priv->pipestat[pipe] & mask) != 0) { |
| u32 reg = PIPESTAT(pipe); |
| |
| dev_priv->pipestat[pipe] &= ~mask; |
| I915_WRITE(reg, dev_priv->pipestat[pipe]); |
| POSTING_READ(reg); |
| } |
| } |
| |
| /** |
| * intel_enable_asle - enable ASLE interrupt for OpRegion |
| */ |
| void intel_enable_asle(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| unsigned long irqflags; |
| |
| /* FIXME: opregion/asle for VLV */ |
| if (IS_VALLEYVIEW(dev)) |
| return; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| ironlake_enable_display_irq(dev_priv, DE_GSE); |
| else { |
| i915_enable_pipestat(dev_priv, 1, |
| PIPE_LEGACY_BLC_EVENT_ENABLE); |
| if (INTEL_INFO(dev)->gen >= 4) |
| i915_enable_pipestat(dev_priv, 0, |
| PIPE_LEGACY_BLC_EVENT_ENABLE); |
| } |
| |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| /** |
| * i915_pipe_enabled - check if a pipe is enabled |
| * @dev: DRM device |
| * @pipe: pipe to check |
| * |
| * Reading certain registers when the pipe is disabled can hang the chip. |
| * Use this routine to make sure the PLL is running and the pipe is active |
| * before reading such registers if unsure. |
| */ |
| static int |
| i915_pipe_enabled(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE; |
| } |
| |
| /* Called from drm generic code, passed a 'crtc', which |
| * we use as a pipe index |
| */ |
| static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long high_frame; |
| unsigned long low_frame; |
| u32 high1, high2, low; |
| |
| if (!i915_pipe_enabled(dev, pipe)) { |
| DRM_DEBUG_DRIVER("trying to get vblank count for disabled " |
| "pipe %c\n", pipe_name(pipe)); |
| return 0; |
| } |
| |
| high_frame = PIPEFRAME(pipe); |
| low_frame = PIPEFRAMEPIXEL(pipe); |
| |
| /* |
| * High & low register fields aren't synchronized, so make sure |
| * we get a low value that's stable across two reads of the high |
| * register. |
| */ |
| do { |
| high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; |
| low = I915_READ(low_frame) & PIPE_FRAME_LOW_MASK; |
| high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK; |
| } while (high1 != high2); |
| |
| high1 >>= PIPE_FRAME_HIGH_SHIFT; |
| low >>= PIPE_FRAME_LOW_SHIFT; |
| return (high1 << 8) | low; |
| } |
| |
| static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int reg = PIPE_FRMCOUNT_GM45(pipe); |
| |
| if (!i915_pipe_enabled(dev, pipe)) { |
| DRM_DEBUG_DRIVER("trying to get vblank count for disabled " |
| "pipe %c\n", pipe_name(pipe)); |
| return 0; |
| } |
| |
| return I915_READ(reg); |
| } |
| |
| static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, |
| int *vpos, int *hpos) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 vbl = 0, position = 0; |
| int vbl_start, vbl_end, htotal, vtotal; |
| bool in_vbl = true; |
| int ret = 0; |
| |
| if (!i915_pipe_enabled(dev, pipe)) { |
| DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled " |
| "pipe %c\n", pipe_name(pipe)); |
| return 0; |
| } |
| |
| /* Get vtotal. */ |
| vtotal = 1 + ((I915_READ(VTOTAL(pipe)) >> 16) & 0x1fff); |
| |
| if (INTEL_INFO(dev)->gen >= 4) { |
| /* No obvious pixelcount register. Only query vertical |
| * scanout position from Display scan line register. |
| */ |
| position = I915_READ(PIPEDSL(pipe)); |
| |
| /* Decode into vertical scanout position. Don't have |
| * horizontal scanout position. |
| */ |
| *vpos = position & 0x1fff; |
| *hpos = 0; |
| } else { |
| /* Have access to pixelcount since start of frame. |
| * We can split this into vertical and horizontal |
| * scanout position. |
| */ |
| position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT; |
| |
| htotal = 1 + ((I915_READ(HTOTAL(pipe)) >> 16) & 0x1fff); |
| *vpos = position / htotal; |
| *hpos = position - (*vpos * htotal); |
| } |
| |
| /* Query vblank area. */ |
| vbl = I915_READ(VBLANK(pipe)); |
| |
| /* Test position against vblank region. */ |
| vbl_start = vbl & 0x1fff; |
| vbl_end = (vbl >> 16) & 0x1fff; |
| |
| if ((*vpos < vbl_start) || (*vpos > vbl_end)) |
| in_vbl = false; |
| |
| /* Inside "upper part" of vblank area? Apply corrective offset: */ |
| if (in_vbl && (*vpos >= vbl_start)) |
| *vpos = *vpos - vtotal; |
| |
| /* Readouts valid? */ |
| if (vbl > 0) |
| ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE; |
| |
| /* In vblank? */ |
| if (in_vbl) |
| ret |= DRM_SCANOUTPOS_INVBL; |
| |
| return ret; |
| } |
| |
| static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, |
| int *max_error, |
| struct timeval *vblank_time, |
| unsigned flags) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc; |
| |
| if (pipe < 0 || pipe >= dev_priv->num_pipe) { |
| DRM_ERROR("Invalid crtc %d\n", pipe); |
| return -EINVAL; |
| } |
| |
| /* Get drm_crtc to timestamp: */ |
| crtc = intel_get_crtc_for_pipe(dev, pipe); |
| if (crtc == NULL) { |
| DRM_ERROR("Invalid crtc %d\n", pipe); |
| return -EINVAL; |
| } |
| |
| if (!crtc->enabled) { |
| DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); |
| return -EBUSY; |
| } |
| |
| /* Helper routine in DRM core does all the work: */ |
| return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error, |
| vblank_time, flags, |
| crtc); |
| } |
| |
| /* |
| * Handle hotplug events outside the interrupt handler proper. |
| */ |
| static void i915_hotplug_work_func(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| hotplug_work); |
| struct drm_device *dev = dev_priv->dev; |
| struct drm_mode_config *mode_config = &dev->mode_config; |
| struct intel_encoder *encoder; |
| |
| mutex_lock(&mode_config->mutex); |
| DRM_DEBUG_KMS("running encoder hotplug functions\n"); |
| |
| list_for_each_entry(encoder, &mode_config->encoder_list, base.head) |
| if (encoder->hot_plug) |
| encoder->hot_plug(encoder); |
| |
| mutex_unlock(&mode_config->mutex); |
| |
| /* Just fire off a uevent and let userspace tell us what to do */ |
| drm_helper_hpd_irq_event(dev); |
| } |
| |
| static void i915_handle_rps_change(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| u32 busy_up, busy_down, max_avg, min_avg; |
| u8 new_delay = dev_priv->cur_delay; |
| |
| I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG); |
| busy_up = I915_READ(RCPREVBSYTUPAVG); |
| busy_down = I915_READ(RCPREVBSYTDNAVG); |
| max_avg = I915_READ(RCBMAXAVG); |
| min_avg = I915_READ(RCBMINAVG); |
| |
| /* Handle RCS change request from hw */ |
| if (busy_up > max_avg) { |
| if (dev_priv->cur_delay != dev_priv->max_delay) |
| new_delay = dev_priv->cur_delay - 1; |
| if (new_delay < dev_priv->max_delay) |
| new_delay = dev_priv->max_delay; |
| } else if (busy_down < min_avg) { |
| if (dev_priv->cur_delay != dev_priv->min_delay) |
| new_delay = dev_priv->cur_delay + 1; |
| if (new_delay > dev_priv->min_delay) |
| new_delay = dev_priv->min_delay; |
| } |
| |
| if (ironlake_set_drps(dev, new_delay)) |
| dev_priv->cur_delay = new_delay; |
| |
| return; |
| } |
| |
| static void notify_ring(struct drm_device *dev, |
| struct intel_ring_buffer *ring) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (ring->obj == NULL) |
| return; |
| |
| trace_i915_gem_request_complete(ring, ring->get_seqno(ring)); |
| |
| wake_up_all(&ring->irq_queue); |
| if (i915_enable_hangcheck) { |
| dev_priv->hangcheck_count = 0; |
| mod_timer(&dev_priv->hangcheck_timer, |
| jiffies + |
| msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); |
| } |
| } |
| |
| static void gen6_pm_rps_work(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| rps_work); |
| u32 pm_iir, pm_imr; |
| u8 new_delay; |
| |
| spin_lock_irq(&dev_priv->rps_lock); |
| pm_iir = dev_priv->pm_iir; |
| dev_priv->pm_iir = 0; |
| pm_imr = I915_READ(GEN6_PMIMR); |
| I915_WRITE(GEN6_PMIMR, 0); |
| spin_unlock_irq(&dev_priv->rps_lock); |
| |
| if ((pm_iir & GEN6_PM_DEFERRED_EVENTS) == 0) |
| return; |
| |
| mutex_lock(&dev_priv->dev->struct_mutex); |
| |
| if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) |
| new_delay = dev_priv->cur_delay + 1; |
| else |
| new_delay = dev_priv->cur_delay - 1; |
| |
| gen6_set_rps(dev_priv->dev, new_delay); |
| |
| mutex_unlock(&dev_priv->dev->struct_mutex); |
| } |
| |
| |
| /** |
| * ivybridge_parity_work - Workqueue called when a parity error interrupt |
| * occurred. |
| * @work: workqueue struct |
| * |
| * Doesn't actually do anything except notify userspace. As a consequence of |
| * this event, userspace should try to remap the bad rows since statistically |
| * it is likely the same row is more likely to go bad again. |
| */ |
| static void ivybridge_parity_work(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| parity_error_work); |
| u32 error_status, row, bank, subbank; |
| char *parity_event[5]; |
| uint32_t misccpctl; |
| unsigned long flags; |
| |
| /* We must turn off DOP level clock gating to access the L3 registers. |
| * In order to prevent a get/put style interface, acquire struct mutex |
| * any time we access those registers. |
| */ |
| mutex_lock(&dev_priv->dev->struct_mutex); |
| |
| misccpctl = I915_READ(GEN7_MISCCPCTL); |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE); |
| POSTING_READ(GEN7_MISCCPCTL); |
| |
| error_status = I915_READ(GEN7_L3CDERRST1); |
| row = GEN7_PARITY_ERROR_ROW(error_status); |
| bank = GEN7_PARITY_ERROR_BANK(error_status); |
| subbank = GEN7_PARITY_ERROR_SUBBANK(error_status); |
| |
| I915_WRITE(GEN7_L3CDERRST1, GEN7_PARITY_ERROR_VALID | |
| GEN7_L3CDERRST1_ENABLE); |
| POSTING_READ(GEN7_L3CDERRST1); |
| |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, flags); |
| dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT; |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, flags); |
| |
| mutex_unlock(&dev_priv->dev->struct_mutex); |
| |
| parity_event[0] = "L3_PARITY_ERROR=1"; |
| parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row); |
| parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank); |
| parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank); |
| parity_event[4] = NULL; |
| |
| kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj, |
| KOBJ_CHANGE, parity_event); |
| |
| DRM_DEBUG("Parity error: Row = %d, Bank = %d, Sub bank = %d.\n", |
| row, bank, subbank); |
| |
| kfree(parity_event[3]); |
| kfree(parity_event[2]); |
| kfree(parity_event[1]); |
| } |
| |
| static void ivybridge_handle_parity_error(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long flags; |
| |
| if (!IS_IVYBRIDGE(dev)) |
| return; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, flags); |
| dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT; |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, flags); |
| |
| queue_work(dev_priv->wq, &dev_priv->parity_error_work); |
| } |
| |
| static void snb_gt_irq_handler(struct drm_device *dev, |
| struct drm_i915_private *dev_priv, |
| u32 gt_iir) |
| { |
| |
| if (gt_iir & (GEN6_RENDER_USER_INTERRUPT | |
| GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT)) |
| notify_ring(dev, &dev_priv->ring[RCS]); |
| if (gt_iir & GEN6_BSD_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[VCS]); |
| if (gt_iir & GEN6_BLITTER_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[BCS]); |
| |
| if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT | |
| GT_GEN6_BSD_CS_ERROR_INTERRUPT | |
| GT_RENDER_CS_ERROR_INTERRUPT)) { |
| DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir); |
| i915_handle_error(dev, false); |
| } |
| |
| if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT) |
| ivybridge_handle_parity_error(dev); |
| } |
| |
| static void gen6_queue_rps_work(struct drm_i915_private *dev_priv, |
| u32 pm_iir) |
| { |
| unsigned long flags; |
| |
| /* |
| * IIR bits should never already be set because IMR should |
| * prevent an interrupt from being shown in IIR. The warning |
| * displays a case where we've unsafely cleared |
| * dev_priv->pm_iir. Although missing an interrupt of the same |
| * type is not a problem, it displays a problem in the logic. |
| * |
| * The mask bit in IMR is cleared by rps_work. |
| */ |
| |
| spin_lock_irqsave(&dev_priv->rps_lock, flags); |
| WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n"); |
| dev_priv->pm_iir |= pm_iir; |
| I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir); |
| POSTING_READ(GEN6_PMIMR); |
| spin_unlock_irqrestore(&dev_priv->rps_lock, flags); |
| |
| queue_work(dev_priv->wq, &dev_priv->rps_work); |
| } |
| |
| static irqreturn_t valleyview_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 iir, gt_iir, pm_iir; |
| irqreturn_t ret = IRQ_NONE; |
| unsigned long irqflags; |
| int pipe; |
| u32 pipe_stats[I915_MAX_PIPES]; |
| bool blc_event; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| while (true) { |
| iir = I915_READ(VLV_IIR); |
| gt_iir = I915_READ(GTIIR); |
| pm_iir = I915_READ(GEN6_PMIIR); |
| |
| if (gt_iir == 0 && pm_iir == 0 && iir == 0) |
| goto out; |
| |
| ret = IRQ_HANDLED; |
| |
| snb_gt_irq_handler(dev, dev_priv, gt_iir); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| for_each_pipe(pipe) { |
| int reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| */ |
| if (pipe_stats[pipe] & 0x8000ffff) { |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| DRM_DEBUG_DRIVER("pipe %c underrun\n", |
| pipe_name(pipe)); |
| I915_WRITE(reg, pipe_stats[pipe]); |
| } |
| } |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| for_each_pipe(pipe) { |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS) |
| drm_handle_vblank(dev, pipe); |
| |
| if (pipe_stats[pipe] & PLANE_FLIPDONE_INT_STATUS_VLV) { |
| intel_prepare_page_flip(dev, pipe); |
| intel_finish_page_flip(dev, pipe); |
| } |
| } |
| |
| /* Consume port. Then clear IIR or we'll miss events */ |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) { |
| u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); |
| |
| DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n", |
| hotplug_status); |
| if (hotplug_status & dev_priv->hotplug_supported_mask) |
| queue_work(dev_priv->wq, |
| &dev_priv->hotplug_work); |
| |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| I915_READ(PORT_HOTPLUG_STAT); |
| } |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pm_iir & GEN6_PM_DEFERRED_EVENTS) |
| gen6_queue_rps_work(dev_priv, pm_iir); |
| |
| I915_WRITE(GTIIR, gt_iir); |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| I915_WRITE(VLV_IIR, iir); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK) |
| DRM_DEBUG_DRIVER("PCH audio power change on port %d\n", |
| (pch_iir & SDE_AUDIO_POWER_MASK) >> |
| SDE_AUDIO_POWER_SHIFT); |
| |
| if (pch_iir & SDE_GMBUS) |
| DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_HDCP_MASK) |
| DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_TRANS_MASK) |
| DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n"); |
| |
| if (pch_iir & SDE_POISON) |
| DRM_ERROR("PCH poison interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK) |
| for_each_pipe(pipe) |
| DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE)) |
| DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n"); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR)) |
| DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n"); |
| |
| if (pch_iir & SDE_TRANSB_FIFO_UNDER) |
| DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n"); |
| if (pch_iir & SDE_TRANSA_FIFO_UNDER) |
| DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n"); |
| } |
| |
| static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) |
| DRM_DEBUG_DRIVER("PCH audio power change on port %d\n", |
| (pch_iir & SDE_AUDIO_POWER_MASK_CPT) >> |
| SDE_AUDIO_POWER_SHIFT_CPT); |
| |
| if (pch_iir & SDE_AUX_MASK_CPT) |
| DRM_DEBUG_DRIVER("AUX channel interrupt\n"); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_CP_REQ_CPT) |
| DRM_DEBUG_DRIVER("Audio CP request interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_CP_CHG_CPT) |
| DRM_DEBUG_DRIVER("Audio CP change interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK_CPT) |
| for_each_pipe(pipe) |
| DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| } |
| |
| static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 de_iir, gt_iir, de_ier, pm_iir; |
| irqreturn_t ret = IRQ_NONE; |
| int i; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| /* disable master interrupt before clearing iir */ |
| de_ier = I915_READ(DEIER); |
| I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); |
| |
| gt_iir = I915_READ(GTIIR); |
| if (gt_iir) { |
| snb_gt_irq_handler(dev, dev_priv, gt_iir); |
| I915_WRITE(GTIIR, gt_iir); |
| ret = IRQ_HANDLED; |
| } |
| |
| de_iir = I915_READ(DEIIR); |
| if (de_iir) { |
| if (de_iir & DE_GSE_IVB) |
| intel_opregion_gse_intr(dev); |
| |
| for (i = 0; i < 3; i++) { |
| if (de_iir & (DE_PLANEA_FLIP_DONE_IVB << (5 * i))) { |
| intel_prepare_page_flip(dev, i); |
| intel_finish_page_flip_plane(dev, i); |
| } |
| if (de_iir & (DE_PIPEA_VBLANK_IVB << (5 * i))) |
| drm_handle_vblank(dev, i); |
| } |
| |
| /* check event from PCH */ |
| if (de_iir & DE_PCH_EVENT_IVB) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| if (pch_iir & SDE_HOTPLUG_MASK_CPT) |
| queue_work(dev_priv->wq, &dev_priv->hotplug_work); |
| cpt_irq_handler(dev, pch_iir); |
| |
| /* clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| |
| I915_WRITE(DEIIR, de_iir); |
| ret = IRQ_HANDLED; |
| } |
| |
| pm_iir = I915_READ(GEN6_PMIIR); |
| if (pm_iir) { |
| if (pm_iir & GEN6_PM_DEFERRED_EVENTS) |
| gen6_queue_rps_work(dev_priv, pm_iir); |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| ret = IRQ_HANDLED; |
| } |
| |
| I915_WRITE(DEIER, de_ier); |
| POSTING_READ(DEIER); |
| |
| return ret; |
| } |
| |
| static void ilk_gt_irq_handler(struct drm_device *dev, |
| struct drm_i915_private *dev_priv, |
| u32 gt_iir) |
| { |
| if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY)) |
| notify_ring(dev, &dev_priv->ring[RCS]); |
| if (gt_iir & GT_BSD_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[VCS]); |
| } |
| |
| static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int ret = IRQ_NONE; |
| u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir; |
| u32 hotplug_mask; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| /* disable master interrupt before clearing iir */ |
| de_ier = I915_READ(DEIER); |
| I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); |
| POSTING_READ(DEIER); |
| |
| de_iir = I915_READ(DEIIR); |
| gt_iir = I915_READ(GTIIR); |
| pch_iir = I915_READ(SDEIIR); |
| pm_iir = I915_READ(GEN6_PMIIR); |
| |
| if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 && |
| (!IS_GEN6(dev) || pm_iir == 0)) |
| goto done; |
| |
| if (HAS_PCH_CPT(dev)) |
| hotplug_mask = SDE_HOTPLUG_MASK_CPT; |
| else |
| hotplug_mask = SDE_HOTPLUG_MASK; |
| |
| ret = IRQ_HANDLED; |
| |
| if (IS_GEN5(dev)) |
| ilk_gt_irq_handler(dev, dev_priv, gt_iir); |
| else |
| snb_gt_irq_handler(dev, dev_priv, gt_iir); |
| |
| if (de_iir & DE_GSE) |
| intel_opregion_gse_intr(dev); |
| |
| if (de_iir & DE_PLANEA_FLIP_DONE) { |
| intel_prepare_page_flip(dev, 0); |
| intel_finish_page_flip_plane(dev, 0); |
| } |
| |
| if (de_iir & DE_PLANEB_FLIP_DONE) { |
| intel_prepare_page_flip(dev, 1); |
| intel_finish_page_flip_plane(dev, 1); |
| } |
| |
| if (de_iir & DE_PIPEA_VBLANK) |
| drm_handle_vblank(dev, 0); |
| |
| if (de_iir & DE_PIPEB_VBLANK) |
| drm_handle_vblank(dev, 1); |
| |
| /* check event from PCH */ |
| if (de_iir & DE_PCH_EVENT) { |
| if (pch_iir & hotplug_mask) |
| queue_work(dev_priv->wq, &dev_priv->hotplug_work); |
| if (HAS_PCH_CPT(dev)) |
| cpt_irq_handler(dev, pch_iir); |
| else |
| ibx_irq_handler(dev, pch_iir); |
| } |
| |
| if (de_iir & DE_PCU_EVENT) { |
| I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS)); |
| i915_handle_rps_change(dev); |
| } |
| |
| if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS) |
| gen6_queue_rps_work(dev_priv, pm_iir); |
| |
| /* should clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| I915_WRITE(GTIIR, gt_iir); |
| I915_WRITE(DEIIR, de_iir); |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| |
| done: |
| I915_WRITE(DEIER, de_ier); |
| POSTING_READ(DEIER); |
| |
| return ret; |
| } |
| |
| /** |
| * i915_error_work_func - do process context error handling work |
| * @work: work struct |
| * |
| * Fire an error uevent so userspace can see that a hang or error |
| * was detected. |
| */ |
| static void i915_error_work_func(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| error_work); |
| struct drm_device *dev = dev_priv->dev; |
| char *error_event[] = { "ERROR=1", NULL }; |
| char *reset_event[] = { "RESET=1", NULL }; |
| char *reset_done_event[] = { "ERROR=0", NULL }; |
| |
| kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event); |
| |
| if (atomic_read(&dev_priv->mm.wedged)) { |
| DRM_DEBUG_DRIVER("resetting chip\n"); |
| kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event); |
| if (!i915_reset(dev)) { |
| atomic_set(&dev_priv->mm.wedged, 0); |
| kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event); |
| } |
| complete_all(&dev_priv->error_completion); |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static struct drm_i915_error_object * |
| i915_error_object_create(struct drm_i915_private *dev_priv, |
| struct drm_i915_gem_object *src) |
| { |
| struct drm_i915_error_object *dst; |
| int page, page_count; |
| u32 reloc_offset; |
| |
| if (src == NULL || src->pages == NULL) |
| return NULL; |
| |
| page_count = src->base.size / PAGE_SIZE; |
| |
| dst = kmalloc(sizeof(*dst) + page_count * sizeof(u32 *), GFP_ATOMIC); |
| if (dst == NULL) |
| return NULL; |
| |
| reloc_offset = src->gtt_offset; |
| for (page = 0; page < page_count; page++) { |
| unsigned long flags; |
| void *d; |
| |
| d = kmalloc(PAGE_SIZE, GFP_ATOMIC); |
| if (d == NULL) |
| goto unwind; |
| |
| local_irq_save(flags); |
| if (reloc_offset < dev_priv->mm.gtt_mappable_end && |
| src->has_global_gtt_mapping) { |
| void __iomem *s; |
| |
| /* Simply ignore tiling or any overlapping fence. |
| * It's part of the error state, and this hopefully |
| * captures what the GPU read. |
| */ |
| |
| s = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, |
| reloc_offset); |
| memcpy_fromio(d, s, PAGE_SIZE); |
| io_mapping_unmap_atomic(s); |
| } else { |
| void *s; |
| |
| drm_clflush_pages(&src->pages[page], 1); |
| |
| s = kmap_atomic(src->pages[page]); |
| memcpy(d, s, PAGE_SIZE); |
| kunmap_atomic(s); |
| |
| drm_clflush_pages(&src->pages[page], 1); |
| } |
| local_irq_restore(flags); |
| |
| dst->pages[page] = d; |
| |
| reloc_offset += PAGE_SIZE; |
| } |
| dst->page_count = page_count; |
| dst->gtt_offset = src->gtt_offset; |
| |
| return dst; |
| |
| unwind: |
| while (page--) |
| kfree(dst->pages[page]); |
| kfree(dst); |
| return NULL; |
| } |
| |
| static void |
| i915_error_object_free(struct drm_i915_error_object *obj) |
| { |
| int page; |
| |
| if (obj == NULL) |
| return; |
| |
| for (page = 0; page < obj->page_count; page++) |
| kfree(obj->pages[page]); |
| |
| kfree(obj); |
| } |
| |
| void |
| i915_error_state_free(struct kref *error_ref) |
| { |
| struct drm_i915_error_state *error = container_of(error_ref, |
| typeof(*error), ref); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(error->ring); i++) { |
| i915_error_object_free(error->ring[i].batchbuffer); |
| i915_error_object_free(error->ring[i].ringbuffer); |
| kfree(error->ring[i].requests); |
| } |
| |
| kfree(error->active_bo); |
| kfree(error->overlay); |
| kfree(error); |
| } |
| static void capture_bo(struct drm_i915_error_buffer *err, |
| struct drm_i915_gem_object *obj) |
| { |
| err->size = obj->base.size; |
| err->name = obj->base.name; |
| err->seqno = obj->last_rendering_seqno; |
| err->gtt_offset = obj->gtt_offset; |
| err->read_domains = obj->base.read_domains; |
| err->write_domain = obj->base.write_domain; |
| err->fence_reg = obj->fence_reg; |
| err->pinned = 0; |
| if (obj->pin_count > 0) |
| err->pinned = 1; |
| if (obj->user_pin_count > 0) |
| err->pinned = -1; |
| err->tiling = obj->tiling_mode; |
| err->dirty = obj->dirty; |
| err->purgeable = obj->madv != I915_MADV_WILLNEED; |
| err->ring = obj->ring ? obj->ring->id : -1; |
| err->cache_level = obj->cache_level; |
| } |
| |
| static u32 capture_active_bo(struct drm_i915_error_buffer *err, |
| int count, struct list_head *head) |
| { |
| struct drm_i915_gem_object *obj; |
| int i = 0; |
| |
| list_for_each_entry(obj, head, mm_list) { |
| capture_bo(err++, obj); |
| if (++i == count) |
| break; |
| } |
| |
| return i; |
| } |
| |
| static u32 capture_pinned_bo(struct drm_i915_error_buffer *err, |
| int count, struct list_head *head) |
| { |
| struct drm_i915_gem_object *obj; |
| int i = 0; |
| |
| list_for_each_entry(obj, head, gtt_list) { |
| if (obj->pin_count == 0) |
| continue; |
| |
| capture_bo(err++, obj); |
| if (++i == count) |
| break; |
| } |
| |
| return i; |
| } |
| |
| static void i915_gem_record_fences(struct drm_device *dev, |
| struct drm_i915_error_state *error) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int i; |
| |
| /* Fences */ |
| switch (INTEL_INFO(dev)->gen) { |
| case 7: |
| case 6: |
| for (i = 0; i < 16; i++) |
| error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8)); |
| break; |
| case 5: |
| case 4: |
| for (i = 0; i < 16; i++) |
| error->fence[i] = I915_READ64(FENCE_REG_965_0 + (i * 8)); |
| break; |
| case 3: |
| if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) |
| for (i = 0; i < 8; i++) |
| error->fence[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4)); |
| case 2: |
| for (i = 0; i < 8; i++) |
| error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4)); |
| break; |
| |
| } |
| } |
| |
| static struct drm_i915_error_object * |
| i915_error_first_batchbuffer(struct drm_i915_private *dev_priv, |
| struct intel_ring_buffer *ring) |
| { |
| struct drm_i915_gem_object *obj; |
| u32 seqno; |
| |
| if (!ring->get_seqno) |
| return NULL; |
| |
| seqno = ring->get_seqno(ring); |
| list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) { |
| if (obj->ring != ring) |
| continue; |
| |
| if (i915_seqno_passed(seqno, obj->last_rendering_seqno)) |
| continue; |
| |
| if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0) |
| continue; |
| |
| /* We need to copy these to an anonymous buffer as the simplest |
| * method to avoid being overwritten by userspace. |
| */ |
| return i915_error_object_create(dev_priv, obj); |
| } |
| |
| return NULL; |
| } |
| |
| static void i915_record_ring_state(struct drm_device *dev, |
| struct drm_i915_error_state *error, |
| struct intel_ring_buffer *ring) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (INTEL_INFO(dev)->gen >= 6) { |
| error->rc_psmi[ring->id] = I915_READ(ring->mmio_base + 0x50); |
| error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring)); |
| error->semaphore_mboxes[ring->id][0] |
| = I915_READ(RING_SYNC_0(ring->mmio_base)); |
| error->semaphore_mboxes[ring->id][1] |
| = I915_READ(RING_SYNC_1(ring->mmio_base)); |
| } |
| |
| if (INTEL_INFO(dev)->gen >= 4) { |
| error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base)); |
| error->ipeir[ring->id] = I915_READ(RING_IPEIR(ring->mmio_base)); |
| error->ipehr[ring->id] = I915_READ(RING_IPEHR(ring->mmio_base)); |
| error->instdone[ring->id] = I915_READ(RING_INSTDONE(ring->mmio_base)); |
| error->instps[ring->id] = I915_READ(RING_INSTPS(ring->mmio_base)); |
| if (ring->id == RCS) { |
| error->instdone1 = I915_READ(INSTDONE1); |
| error->bbaddr = I915_READ64(BB_ADDR); |
| } |
| } else { |
| error->faddr[ring->id] = I915_READ(DMA_FADD_I8XX); |
| error->ipeir[ring->id] = I915_READ(IPEIR); |
| error->ipehr[ring->id] = I915_READ(IPEHR); |
| error->instdone[ring->id] = I915_READ(INSTDONE); |
| } |
| |
| error->waiting[ring->id] = waitqueue_active(&ring->irq_queue); |
| error->instpm[ring->id] = I915_READ(RING_INSTPM(ring->mmio_base)); |
| error->seqno[ring->id] = ring->get_seqno(ring); |
| error->acthd[ring->id] = intel_ring_get_active_head(ring); |
| error->head[ring->id] = I915_READ_HEAD(ring); |
| error->tail[ring->id] = I915_READ_TAIL(ring); |
| |
| error->cpu_ring_head[ring->id] = ring->head; |
| error->cpu_ring_tail[ring->id] = ring->tail; |
| } |
| |
| static void i915_gem_record_rings(struct drm_device *dev, |
| struct drm_i915_error_state *error) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_ring_buffer *ring; |
| struct drm_i915_gem_request *request; |
| int i, count; |
| |
| for_each_ring(ring, dev_priv, i) { |
| i915_record_ring_state(dev, error, ring); |
| |
| error->ring[i].batchbuffer = |
| i915_error_first_batchbuffer(dev_priv, ring); |
| |
| error->ring[i].ringbuffer = |
| i915_error_object_create(dev_priv, ring->obj); |
| |
| count = 0; |
| list_for_each_entry(request, &ring->request_list, list) |
| count++; |
| |
| error->ring[i].num_requests = count; |
| error->ring[i].requests = |
| kmalloc(count*sizeof(struct drm_i915_error_request), |
| GFP_ATOMIC); |
| if (error->ring[i].requests == NULL) { |
| error->ring[i].num_requests = 0; |
| continue; |
| } |
| |
| count = 0; |
| list_for_each_entry(request, &ring->request_list, list) { |
| struct drm_i915_error_request *erq; |
| |
| erq = &error->ring[i].requests[count++]; |
| erq->seqno = request->seqno; |
| erq->jiffies = request->emitted_jiffies; |
| erq->tail = request->tail; |
| } |
| } |
| } |
| |
| /** |
| * i915_capture_error_state - capture an error record for later analysis |
| * @dev: drm device |
| * |
| * Should be called when an error is detected (either a hang or an error |
| * interrupt) to capture error state from the time of the error. Fills |
| * out a structure which becomes available in debugfs for user level tools |
| * to pick up. |
| */ |
| static void i915_capture_error_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_object *obj; |
| struct drm_i915_error_state *error; |
| unsigned long flags; |
| int i, pipe; |
| |
| spin_lock_irqsave(&dev_priv->error_lock, flags); |
| error = dev_priv->first_error; |
| spin_unlock_irqrestore(&dev_priv->error_lock, flags); |
| if (error) |
| return; |
| |
| /* Account for pipe specific data like PIPE*STAT */ |
| error = kzalloc(sizeof(*error), GFP_ATOMIC); |
| if (!error) { |
| DRM_DEBUG_DRIVER("out of memory, not capturing error state\n"); |
| return; |
| } |
| |
| DRM_INFO("capturing error event; look for more information in /debug/dri/%d/i915_error_state\n", |
| dev->primary->index); |
| |
| kref_init(&error->ref); |
| error->eir = I915_READ(EIR); |
| error->pgtbl_er = I915_READ(PGTBL_ER); |
| error->ccid = I915_READ(CCID); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| error->ier = I915_READ(DEIER) | I915_READ(GTIER); |
| else if (IS_VALLEYVIEW(dev)) |
| error->ier = I915_READ(GTIER) | I915_READ(VLV_IER); |
| else if (IS_GEN2(dev)) |
| error->ier = I915_READ16(IER); |
| else |
| error->ier = I915_READ(IER); |
| |
| for_each_pipe(pipe) |
| error->pipestat[pipe] = I915_READ(PIPESTAT(pipe)); |
| |
| if (INTEL_INFO(dev)->gen >= 6) { |
| error->error = I915_READ(ERROR_GEN6); |
| error->done_reg = I915_READ(DONE_REG); |
| } |
| |
| i915_gem_record_fences(dev, error); |
| i915_gem_record_rings(dev, error); |
| |
| /* Record buffers on the active and pinned lists. */ |
| error->active_bo = NULL; |
| error->pinned_bo = NULL; |
| |
| i = 0; |
| list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) |
| i++; |
| error->active_bo_count = i; |
| list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) |
| if (obj->pin_count) |
| i++; |
| error->pinned_bo_count = i - error->active_bo_count; |
| |
| error->active_bo = NULL; |
| error->pinned_bo = NULL; |
| if (i) { |
| error->active_bo = kmalloc(sizeof(*error->active_bo)*i, |
| GFP_ATOMIC); |
| if (error->active_bo) |
| error->pinned_bo = |
| error->active_bo + error->active_bo_count; |
| } |
| |
| if (error->active_bo) |
| error->active_bo_count = |
| capture_active_bo(error->active_bo, |
| error->active_bo_count, |
| &dev_priv->mm.active_list); |
| |
| if (error->pinned_bo) |
| error->pinned_bo_count = |
| capture_pinned_bo(error->pinned_bo, |
| error->pinned_bo_count, |
| &dev_priv->mm.gtt_list); |
| |
| do_gettimeofday(&error->time); |
| |
| error->overlay = intel_overlay_capture_error_state(dev); |
| error->display = intel_display_capture_error_state(dev); |
| |
| spin_lock_irqsave(&dev_priv->error_lock, flags); |
| if (dev_priv->first_error == NULL) { |
| dev_priv->first_error = error; |
| error = NULL; |
| } |
| spin_unlock_irqrestore(&dev_priv->error_lock, flags); |
| |
| if (error) |
| i915_error_state_free(&error->ref); |
| } |
| |
| void i915_destroy_error_state(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_error_state *error; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev_priv->error_lock, flags); |
| error = dev_priv->first_error; |
| dev_priv->first_error = NULL; |
| spin_unlock_irqrestore(&dev_priv->error_lock, flags); |
| |
| if (error) |
| kref_put(&error->ref, i915_error_state_free); |
| } |
| #else |
| #define i915_capture_error_state(x) |
| #endif |
| |
| static void i915_report_and_clear_eir(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 eir = I915_READ(EIR); |
| int pipe; |
| |
| if (!eir) |
| return; |
| |
| pr_err("render error detected, EIR: 0x%08x\n", eir); |
| |
| if (IS_G4X(dev)) { |
| if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) { |
| u32 ipeir = I915_READ(IPEIR_I965); |
| |
| pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965)); |
| pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965)); |
| pr_err(" INSTDONE: 0x%08x\n", |
| I915_READ(INSTDONE_I965)); |
| pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS)); |
| pr_err(" INSTDONE1: 0x%08x\n", I915_READ(INSTDONE1)); |
| pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965)); |
| I915_WRITE(IPEIR_I965, ipeir); |
| POSTING_READ(IPEIR_I965); |
| } |
| if (eir & GM45_ERROR_PAGE_TABLE) { |
| u32 pgtbl_err = I915_READ(PGTBL_ER); |
| pr_err("page table error\n"); |
| pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err); |
| I915_WRITE(PGTBL_ER, pgtbl_err); |
| POSTING_READ(PGTBL_ER); |
| } |
| } |
| |
| if (!IS_GEN2(dev)) { |
| if (eir & I915_ERROR_PAGE_TABLE) { |
| u32 pgtbl_err = I915_READ(PGTBL_ER); |
| pr_err("page table error\n"); |
| pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err); |
| I915_WRITE(PGTBL_ER, pgtbl_err); |
| POSTING_READ(PGTBL_ER); |
| } |
| } |
| |
| if (eir & I915_ERROR_MEMORY_REFRESH) { |
| pr_err("memory refresh error:\n"); |
| for_each_pipe(pipe) |
| pr_err("pipe %c stat: 0x%08x\n", |
| pipe_name(pipe), I915_READ(PIPESTAT(pipe))); |
| /* pipestat has already been acked */ |
| } |
| if (eir & I915_ERROR_INSTRUCTION) { |
| pr_err("instruction error\n"); |
| pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM)); |
| if (INTEL_INFO(dev)->gen < 4) { |
| u32 ipeir = I915_READ(IPEIR); |
| |
| pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR)); |
| pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR)); |
| pr_err(" INSTDONE: 0x%08x\n", I915_READ(INSTDONE)); |
| pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD)); |
| I915_WRITE(IPEIR, ipeir); |
| POSTING_READ(IPEIR); |
| } else { |
| u32 ipeir = I915_READ(IPEIR_I965); |
| |
| pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965)); |
| pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965)); |
| pr_err(" INSTDONE: 0x%08x\n", |
| I915_READ(INSTDONE_I965)); |
| pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS)); |
| pr_err(" INSTDONE1: 0x%08x\n", I915_READ(INSTDONE1)); |
| pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965)); |
| I915_WRITE(IPEIR_I965, ipeir); |
| POSTING_READ(IPEIR_I965); |
| } |
| } |
| |
| I915_WRITE(EIR, eir); |
| POSTING_READ(EIR); |
| eir = I915_READ(EIR); |
| if (eir) { |
| /* |
| * some errors might have become stuck, |
| * mask them. |
| */ |
| DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); |
| I915_WRITE(EMR, I915_READ(EMR) | eir); |
| I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| } |
| } |
| |
| /** |
| * i915_handle_error - handle an error interrupt |
| * @dev: drm device |
| * |
| * Do some basic checking of regsiter state at error interrupt time and |
| * dump it to the syslog. Also call i915_capture_error_state() to make |
| * sure we get a record and make it available in debugfs. Fire a uevent |
| * so userspace knows something bad happened (should trigger collection |
| * of a ring dump etc.). |
| */ |
| void i915_handle_error(struct drm_device *dev, bool wedged) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_ring_buffer *ring; |
| int i; |
| |
| i915_capture_error_state(dev); |
| i915_report_and_clear_eir(dev); |
| |
| if (wedged) { |
| INIT_COMPLETION(dev_priv->error_completion); |
| atomic_set(&dev_priv->mm.wedged, 1); |
| |
| /* |
| * Wakeup waiting processes so they don't hang |
| */ |
| for_each_ring(ring, dev_priv, i) |
| wake_up_all(&ring->irq_queue); |
| } |
| |
| queue_work(dev_priv->wq, &dev_priv->error_work); |
| } |
| |
| static void i915_pageflip_stall_check(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_i915_gem_object *obj; |
| struct intel_unpin_work *work; |
| unsigned long flags; |
| bool stall_detected; |
| |
| /* Ignore early vblank irqs */ |
| if (intel_crtc == NULL) |
| return; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| work = intel_crtc->unpin_work; |
| |
| if (work == NULL || work->pending || !work->enable_stall_check) { |
| /* Either the pending flip IRQ arrived, or we're too early. Don't check */ |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| return; |
| } |
| |
| /* Potential stall - if we see that the flip has happened, assume a missed interrupt */ |
| obj = work->pending_flip_obj; |
| if (INTEL_INFO(dev)->gen >= 4) { |
| int dspsurf = DSPSURF(intel_crtc->plane); |
| stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) == |
| obj->gtt_offset; |
| } else { |
| int dspaddr = DSPADDR(intel_crtc->plane); |
| stall_detected = I915_READ(dspaddr) == (obj->gtt_offset + |
| crtc->y * crtc->fb->pitches[0] + |
| crtc->x * crtc->fb->bits_per_pixel/8); |
| } |
| |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| if (stall_detected) { |
| DRM_DEBUG_DRIVER("Pageflip stall detected\n"); |
| intel_prepare_page_flip(dev, intel_crtc->plane); |
| } |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| static int i915_enable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| if (!i915_pipe_enabled(dev, pipe)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| if (INTEL_INFO(dev)->gen >= 4) |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_ENABLE); |
| else |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_VBLANK_INTERRUPT_ENABLE); |
| |
| /* maintain vblank delivery even in deep C-states */ |
| if (dev_priv->info->gen == 3) |
| I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS)); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int ironlake_enable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| if (!i915_pipe_enabled(dev, pipe)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ironlake_enable_display_irq(dev_priv, (pipe == 0) ? |
| DE_PIPEA_VBLANK : DE_PIPEB_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int ivybridge_enable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| if (!i915_pipe_enabled(dev, pipe)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ironlake_enable_display_irq(dev_priv, |
| DE_PIPEA_VBLANK_IVB << (5 * pipe)); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| static int valleyview_enable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| u32 imr; |
| |
| if (!i915_pipe_enabled(dev, pipe)) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| imr = I915_READ(VLV_IMR); |
| if (pipe == 0) |
| imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; |
| else |
| imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; |
| I915_WRITE(VLV_IMR, imr); |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_ENABLE); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| static void i915_disable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| if (dev_priv->info->gen == 3) |
| I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_DIS)); |
| |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_VBLANK_INTERRUPT_ENABLE | |
| PIPE_START_VBLANK_INTERRUPT_ENABLE); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void ironlake_disable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ironlake_disable_display_irq(dev_priv, (pipe == 0) ? |
| DE_PIPEA_VBLANK : DE_PIPEB_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void ivybridge_disable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ironlake_disable_display_irq(dev_priv, |
| DE_PIPEA_VBLANK_IVB << (pipe * 5)); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void valleyview_disable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| u32 imr; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_ENABLE); |
| imr = I915_READ(VLV_IMR); |
| if (pipe == 0) |
| imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; |
| else |
| imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; |
| I915_WRITE(VLV_IMR, imr); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static u32 |
| ring_last_seqno(struct intel_ring_buffer *ring) |
| { |
| return list_entry(ring->request_list.prev, |
| struct drm_i915_gem_request, list)->seqno; |
| } |
| |
| static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err) |
| { |
| if (list_empty(&ring->request_list) || |
| i915_seqno_passed(ring->get_seqno(ring), ring_last_seqno(ring))) { |
| /* Issue a wake-up to catch stuck h/w. */ |
| if (waitqueue_active(&ring->irq_queue)) { |
| DRM_ERROR("Hangcheck timer elapsed... %s idle\n", |
| ring->name); |
| wake_up_all(&ring->irq_queue); |
| *err = true; |
| } |
| return true; |
| } |
| return false; |
| } |
| |
| static bool kick_ring(struct intel_ring_buffer *ring) |
| { |
| struct drm_device *dev = ring->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 tmp = I915_READ_CTL(ring); |
| if (tmp & RING_WAIT) { |
| DRM_ERROR("Kicking stuck wait on %s\n", |
| ring->name); |
| I915_WRITE_CTL(ring, tmp); |
| return true; |
| } |
| return false; |
| } |
| |
| static bool i915_hangcheck_hung(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (dev_priv->hangcheck_count++ > 1) { |
| bool hung = true; |
| |
| DRM_ERROR("Hangcheck timer elapsed... GPU hung\n"); |
| i915_handle_error(dev, true); |
| |
| if (!IS_GEN2(dev)) { |
| struct intel_ring_buffer *ring; |
| int i; |
| |
| /* Is the chip hanging on a WAIT_FOR_EVENT? |
| * If so we can simply poke the RB_WAIT bit |
| * and break the hang. This should work on |
| * all but the second generation chipsets. |
| */ |
| for_each_ring(ring, dev_priv, i) |
| hung &= !kick_ring(ring); |
| } |
| |
| return hung; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * This is called when the chip hasn't reported back with completed |
| * batchbuffers in a long time. The first time this is called we simply record |
| * ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses |
| * again, we assume the chip is wedged and try to fix it. |
| */ |
| void i915_hangcheck_elapsed(unsigned long data) |
| { |
| struct drm_device *dev = (struct drm_device *)data; |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| uint32_t acthd[I915_NUM_RINGS], instdone, instdone1; |
| struct intel_ring_buffer *ring; |
| bool err = false, idle; |
| int i; |
| |
| if (!i915_enable_hangcheck) |
| return; |
| |
| memset(acthd, 0, sizeof(acthd)); |
| idle = true; |
| for_each_ring(ring, dev_priv, i) { |
| idle &= i915_hangcheck_ring_idle(ring, &err); |
| acthd[i] = intel_ring_get_active_head(ring); |
| } |
| |
| /* If all work is done then ACTHD clearly hasn't advanced. */ |
| if (idle) { |
| if (err) { |
| if (i915_hangcheck_hung(dev)) |
| return; |
| |
| goto repeat; |
| } |
| |
| dev_priv->hangcheck_count = 0; |
| return; |
| } |
| |
| if (INTEL_INFO(dev)->gen < 4) { |
| instdone = I915_READ(INSTDONE); |
| instdone1 = 0; |
| } else { |
| instdone = I915_READ(INSTDONE_I965); |
| instdone1 = I915_READ(INSTDONE1); |
| } |
| |
| if (memcmp(dev_priv->last_acthd, acthd, sizeof(acthd)) == 0 && |
| dev_priv->last_instdone == instdone && |
| dev_priv->last_instdone1 == instdone1) { |
| if (i915_hangcheck_hung(dev)) |
| return; |
| } else { |
| dev_priv->hangcheck_count = 0; |
| |
| memcpy(dev_priv->last_acthd, acthd, sizeof(acthd)); |
| dev_priv->last_instdone = instdone; |
| dev_priv->last_instdone1 = instdone1; |
| } |
| |
| repeat: |
| /* Reset timer case chip hangs without another request being added */ |
| mod_timer(&dev_priv->hangcheck_timer, |
| jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); |
| } |
| |
| /* drm_dma.h hooks |
| */ |
| static void ironlake_irq_preinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| atomic_set(&dev_priv->irq_received, 0); |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| |
| /* XXX hotplug from PCH */ |
| |
| I915_WRITE(DEIMR, 0xffffffff); |
| I915_WRITE(DEIER, 0x0); |
| POSTING_READ(DEIER); |
| |
| /* and GT */ |
| I915_WRITE(GTIMR, 0xffffffff); |
| I915_WRITE(GTIER, 0x0); |
| POSTING_READ(GTIER); |
| |
| /* south display irq */ |
| I915_WRITE(SDEIMR, 0xffffffff); |
| I915_WRITE(SDEIER, 0x0); |
| POSTING_READ(SDEIER); |
| } |
| |
| static void valleyview_irq_preinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| atomic_set(&dev_priv->irq_received, 0); |
| |
| /* VLV magic */ |
| I915_WRITE(VLV_IMR, 0); |
| I915_WRITE(RING_IMR(RENDER_RING_BASE), 0); |
| I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0); |
| I915_WRITE(RING_IMR(BLT_RING_BASE), 0); |
| |
| /* and GT */ |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIMR, 0xffffffff); |
| I915_WRITE(GTIER, 0x0); |
| POSTING_READ(GTIER); |
| |
| I915_WRITE(DPINVGTT, 0xff); |
| |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0xffff); |
| I915_WRITE(VLV_IIR, 0xffffffff); |
| I915_WRITE(VLV_IMR, 0xffffffff); |
| I915_WRITE(VLV_IER, 0x0); |
| POSTING_READ(VLV_IER); |
| } |
| |
| /* |
| * Enable digital hotplug on the PCH, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec) |
| * |
| * This register is the same on all known PCH chips. |
| */ |
| |
| static void ironlake_enable_pch_hotplug(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 hotplug; |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK); |
| hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; |
| hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms; |
| hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static int ironlake_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| /* enable kind of interrupts always enabled */ |
| u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | |
| DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE; |
| u32 render_irqs; |
| u32 hotplug_mask; |
| |
| dev_priv->irq_mask = ~display_mask; |
| |
| /* should always can generate irq */ |
| I915_WRITE(DEIIR, I915_READ(DEIIR)); |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK); |
| POSTING_READ(DEIER); |
| |
| dev_priv->gt_irq_mask = ~0; |
| |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| |
| if (IS_GEN6(dev)) |
| render_irqs = |
| GT_USER_INTERRUPT | |
| GEN6_BSD_USER_INTERRUPT | |
| GEN6_BLITTER_USER_INTERRUPT; |
| else |
| render_irqs = |
| GT_USER_INTERRUPT | |
| GT_PIPE_NOTIFY | |
| GT_BSD_USER_INTERRUPT; |
| I915_WRITE(GTIER, render_irqs); |
| POSTING_READ(GTIER); |
| |
| if (HAS_PCH_CPT(dev)) { |
| hotplug_mask = (SDE_CRT_HOTPLUG_CPT | |
| SDE_PORTB_HOTPLUG_CPT | |
| SDE_PORTC_HOTPLUG_CPT | |
| SDE_PORTD_HOTPLUG_CPT); |
| } else { |
| hotplug_mask = (SDE_CRT_HOTPLUG | |
| SDE_PORTB_HOTPLUG | |
| SDE_PORTC_HOTPLUG | |
| SDE_PORTD_HOTPLUG | |
| SDE_AUX_MASK); |
| } |
| |
| dev_priv->pch_irq_mask = ~hotplug_mask; |
| |
| I915_WRITE(SDEIIR, I915_READ(SDEIIR)); |
| I915_WRITE(SDEIMR, dev_priv->pch_irq_mask); |
| I915_WRITE(SDEIER, hotplug_mask); |
| POSTING_READ(SDEIER); |
| |
| ironlake_enable_pch_hotplug(dev); |
| |
| if (IS_IRONLAKE_M(dev)) { |
| /* Clear & enable PCU event interrupts */ |
| I915_WRITE(DEIIR, DE_PCU_EVENT); |
| I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT); |
| ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT); |
| } |
| |
| return 0; |
| } |
| |
| static int ivybridge_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| /* enable kind of interrupts always enabled */ |
| u32 display_mask = |
| DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB | |
| DE_PLANEC_FLIP_DONE_IVB | |
| DE_PLANEB_FLIP_DONE_IVB | |
| DE_PLANEA_FLIP_DONE_IVB; |
| u32 render_irqs; |
| u32 hotplug_mask; |
| |
| dev_priv->irq_mask = ~display_mask; |
| |
| /* should always can generate irq */ |
| I915_WRITE(DEIIR, I915_READ(DEIIR)); |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| I915_WRITE(DEIER, |
| display_mask | |
| DE_PIPEC_VBLANK_IVB | |
| DE_PIPEB_VBLANK_IVB | |
| DE_PIPEA_VBLANK_IVB); |
| POSTING_READ(DEIER); |
| |
| dev_priv->gt_irq_mask = ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT; |
| |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| |
| render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT | |
| GEN6_BLITTER_USER_INTERRUPT | GT_GEN7_L3_PARITY_ERROR_INTERRUPT; |
| I915_WRITE(GTIER, render_irqs); |
| POSTING_READ(GTIER); |
| |
| hotplug_mask = (SDE_CRT_HOTPLUG_CPT | |
| SDE_PORTB_HOTPLUG_CPT | |
| SDE_PORTC_HOTPLUG_CPT | |
| SDE_PORTD_HOTPLUG_CPT); |
| dev_priv->pch_irq_mask = ~hotplug_mask; |
| |
| I915_WRITE(SDEIIR, I915_READ(SDEIIR)); |
| I915_WRITE(SDEIMR, dev_priv->pch_irq_mask); |
| I915_WRITE(SDEIER, hotplug_mask); |
| POSTING_READ(SDEIER); |
| |
| ironlake_enable_pch_hotplug(dev); |
| |
| return 0; |
| } |
| |
| static int valleyview_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 enable_mask; |
| u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); |
| u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV; |
| u16 msid; |
| |
| enable_mask = I915_DISPLAY_PORT_INTERRUPT; |
| enable_mask |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; |
| |
| /* |
| *Leave vblank interrupts masked initially. enable/disable will |
| * toggle them based on usage. |
| */ |
| dev_priv->irq_mask = (~enable_mask) | |
| I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT | |
| I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; |
| |
| dev_priv->pipestat[0] = 0; |
| dev_priv->pipestat[1] = 0; |
| |
| /* Hack for broken MSIs on VLV */ |
| pci_write_config_dword(dev_priv->dev->pdev, 0x94, 0xfee00000); |
| pci_read_config_word(dev->pdev, 0x98, &msid); |
| msid &= 0xff; /* mask out delivery bits */ |
| msid |= (1<<14); |
| pci_write_config_word(dev_priv->dev->pdev, 0x98, msid); |
| |
| I915_WRITE(VLV_IMR, dev_priv->irq_mask); |
| I915_WRITE(VLV_IER, enable_mask); |
| I915_WRITE(VLV_IIR, 0xffffffff); |
| I915_WRITE(PIPESTAT(0), 0xffff); |
| I915_WRITE(PIPESTAT(1), 0xffff); |
| POSTING_READ(VLV_IER); |
| |
| i915_enable_pipestat(dev_priv, 0, pipestat_enable); |
| i915_enable_pipestat(dev_priv, 1, pipestat_enable); |
| |
| I915_WRITE(VLV_IIR, 0xffffffff); |
| I915_WRITE(VLV_IIR, 0xffffffff); |
| |
| dev_priv->gt_irq_mask = ~0; |
| |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| I915_WRITE(GTIMR, dev_priv->gt_irq_mask); |
| I915_WRITE(GTIER, GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT | |
| GT_GEN6_BLT_CS_ERROR_INTERRUPT | |
| GT_GEN6_BLT_USER_INTERRUPT | |
| GT_GEN6_BSD_USER_INTERRUPT | |
| GT_GEN6_BSD_CS_ERROR_INTERRUPT | |
| GT_GEN7_L3_PARITY_ERROR_INTERRUPT | |
| GT_PIPE_NOTIFY | |
| GT_RENDER_CS_ERROR_INTERRUPT | |
| GT_SYNC_STATUS | |
| GT_USER_INTERRUPT); |
| POSTING_READ(GTIER); |
| |
| /* ack & enable invalid PTE error interrupts */ |
| #if 0 /* FIXME: add support to irq handler for checking these bits */ |
| I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK); |
| I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK); |
| #endif |
| |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| #if 0 /* FIXME: check register definitions; some have moved */ |
| /* Note HDMI and DP share bits */ |
| if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMIB_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMIC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMID_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS) |
| hotplug_en |= SDVOC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS) |
| hotplug_en |= SDVOB_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) { |
| hotplug_en |= CRT_HOTPLUG_INT_EN; |
| hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; |
| } |
| #endif |
| |
| I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); |
| |
| return 0; |
| } |
| |
| static void valleyview_irq_uninstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| if (!dev_priv) |
| return; |
| |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0xffff); |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0xffff); |
| I915_WRITE(VLV_IIR, 0xffffffff); |
| I915_WRITE(VLV_IMR, 0xffffffff); |
| I915_WRITE(VLV_IER, 0x0); |
| POSTING_READ(VLV_IER); |
| } |
| |
| static void ironlake_irq_uninstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| if (!dev_priv) |
| return; |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| |
| I915_WRITE(DEIMR, 0xffffffff); |
| I915_WRITE(DEIER, 0x0); |
| I915_WRITE(DEIIR, I915_READ(DEIIR)); |
| |
| I915_WRITE(GTIMR, 0xffffffff); |
| I915_WRITE(GTIER, 0x0); |
| I915_WRITE(GTIIR, I915_READ(GTIIR)); |
| |
| I915_WRITE(SDEIMR, 0xffffffff); |
| I915_WRITE(SDEIER, 0x0); |
| I915_WRITE(SDEIIR, I915_READ(SDEIIR)); |
| } |
| |
| static void i8xx_irq_preinstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| atomic_set(&dev_priv->irq_received, 0); |
| |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE16(IMR, 0xffff); |
| I915_WRITE16(IER, 0x0); |
| POSTING_READ16(IER); |
| } |
| |
| static int i8xx_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| dev_priv->pipestat[0] = 0; |
| dev_priv->pipestat[1] = 0; |
| |
| I915_WRITE16(EMR, |
| ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT | |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| I915_WRITE16(IMR, dev_priv->irq_mask); |
| |
| I915_WRITE16(IER, |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT); |
| POSTING_READ16(IER); |
| |
| return 0; |
| } |
| |
| static irqreturn_t i8xx_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u16 iir, new_iir; |
| u32 pipe_stats[2]; |
| unsigned long irqflags; |
| int irq_received; |
| int pipe; |
| u16 flip_mask = |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| iir = I915_READ16(IIR); |
| if (iir == 0) |
| return IRQ_NONE; |
| |
| while (iir & ~flip_mask) { |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| i915_handle_error(dev, false); |
| |
| for_each_pipe(pipe) { |
| int reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| */ |
| if (pipe_stats[pipe] & 0x8000ffff) { |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| DRM_DEBUG_DRIVER("pipe %c underrun\n", |
| pipe_name(pipe)); |
| I915_WRITE(reg, pipe_stats[pipe]); |
| irq_received = 1; |
| } |
| } |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| I915_WRITE16(IIR, iir & ~flip_mask); |
| new_iir = I915_READ16(IIR); /* Flush posted writes */ |
| |
| i915_update_dri1_breadcrumb(dev); |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[RCS]); |
| |
| if (pipe_stats[0] & PIPE_VBLANK_INTERRUPT_STATUS && |
| drm_handle_vblank(dev, 0)) { |
| if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) { |
| intel_prepare_page_flip(dev, 0); |
| intel_finish_page_flip(dev, 0); |
| flip_mask &= ~I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT; |
| } |
| } |
| |
| if (pipe_stats[1] & PIPE_VBLANK_INTERRUPT_STATUS && |
| drm_handle_vblank(dev, 1)) { |
| if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) { |
| intel_prepare_page_flip(dev, 1); |
| intel_finish_page_flip(dev, 1); |
| flip_mask &= ~I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; |
| } |
| } |
| |
| iir = new_iir; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void i8xx_irq_uninstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| for_each_pipe(pipe) { |
| /* Clear enable bits; then clear status bits */ |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe))); |
| } |
| I915_WRITE16(IMR, 0xffff); |
| I915_WRITE16(IER, 0x0); |
| I915_WRITE16(IIR, I915_READ16(IIR)); |
| } |
| |
| static void i915_irq_preinstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| atomic_set(&dev_priv->irq_received, 0); |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| I915_WRITE16(HWSTAM, 0xeffe); |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| POSTING_READ(IER); |
| } |
| |
| static int i915_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 enable_mask; |
| |
| dev_priv->pipestat[0] = 0; |
| dev_priv->pipestat[1] = 0; |
| |
| I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT | |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| /* Enable in IER... */ |
| enable_mask |= I915_DISPLAY_PORT_INTERRUPT; |
| /* and unmask in IMR */ |
| dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT; |
| } |
| |
| I915_WRITE(IMR, dev_priv->irq_mask); |
| I915_WRITE(IER, enable_mask); |
| POSTING_READ(IER); |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); |
| |
| if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMIB_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMIC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMID_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915) |
| hotplug_en |= SDVOC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915) |
| hotplug_en |= SDVOB_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) { |
| hotplug_en |= CRT_HOTPLUG_INT_EN; |
| hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; |
| } |
| |
| /* Ignore TV since it's buggy */ |
| |
| I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); |
| } |
| |
| intel_opregion_enable_asle(dev); |
| |
| return 0; |
| } |
| |
| static irqreturn_t i915_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 iir, new_iir, pipe_stats[I915_MAX_PIPES]; |
| unsigned long irqflags; |
| u32 flip_mask = |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; |
| u32 flip[2] = { |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT, |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
| }; |
| int pipe, ret = IRQ_NONE; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| iir = I915_READ(IIR); |
| do { |
| bool irq_received = (iir & ~flip_mask) != 0; |
| bool blc_event = false; |
| |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| i915_handle_error(dev, false); |
| |
| for_each_pipe(pipe) { |
| int reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* Clear the PIPE*STAT regs before the IIR */ |
| if (pipe_stats[pipe] & 0x8000ffff) { |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| DRM_DEBUG_DRIVER("pipe %c underrun\n", |
| pipe_name(pipe)); |
| I915_WRITE(reg, pipe_stats[pipe]); |
| irq_received = true; |
| } |
| } |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| if (!irq_received) |
| break; |
| |
| /* Consume port. Then clear IIR or we'll miss events */ |
| if ((I915_HAS_HOTPLUG(dev)) && |
| (iir & I915_DISPLAY_PORT_INTERRUPT)) { |
| u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); |
| |
| DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n", |
| hotplug_status); |
| if (hotplug_status & dev_priv->hotplug_supported_mask) |
| queue_work(dev_priv->wq, |
| &dev_priv->hotplug_work); |
| |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| POSTING_READ(PORT_HOTPLUG_STAT); |
| } |
| |
| I915_WRITE(IIR, iir & ~flip_mask); |
| new_iir = I915_READ(IIR); /* Flush posted writes */ |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[RCS]); |
| |
| for_each_pipe(pipe) { |
| int plane = pipe; |
| if (IS_MOBILE(dev)) |
| plane = !plane; |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS && |
| drm_handle_vblank(dev, pipe)) { |
| if (iir & flip[plane]) { |
| intel_prepare_page_flip(dev, plane); |
| intel_finish_page_flip(dev, pipe); |
| flip_mask &= ~flip[plane]; |
| } |
| } |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev); |
| |
| /* With MSI, interrupts are only generated when iir |
| * transitions from zero to nonzero. If another bit got |
| * set while we were handling the existing iir bits, then |
| * we would never get another interrupt. |
| * |
| * This is fine on non-MSI as well, as if we hit this path |
| * we avoid exiting the interrupt handler only to generate |
| * another one. |
| * |
| * Note that for MSI this could cause a stray interrupt report |
| * if an interrupt landed in the time between writing IIR and |
| * the posting read. This should be rare enough to never |
| * trigger the 99% of 100,000 interrupts test for disabling |
| * stray interrupts. |
| */ |
| ret = IRQ_HANDLED; |
| iir = new_iir; |
| } while (iir & ~flip_mask); |
| |
| i915_update_dri1_breadcrumb(dev); |
| |
| return ret; |
| } |
| |
| static void i915_irq_uninstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| if (I915_HAS_HOTPLUG(dev)) { |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| I915_WRITE16(HWSTAM, 0xffff); |
| for_each_pipe(pipe) { |
| /* Clear enable bits; then clear status bits */ |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe))); |
| } |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| |
| I915_WRITE(IIR, I915_READ(IIR)); |
| } |
| |
| static void i965_irq_preinstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| atomic_set(&dev_priv->irq_received, 0); |
| |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| POSTING_READ(IER); |
| } |
| |
| static int i965_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 hotplug_en; |
| u32 enable_mask; |
| u32 error_mask; |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | |
| I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT | |
| I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); |
| |
| enable_mask = ~dev_priv->irq_mask; |
| enable_mask |= I915_USER_INTERRUPT; |
| |
| if (IS_G4X(dev)) |
| enable_mask |= I915_BSD_USER_INTERRUPT; |
| |
| dev_priv->pipestat[0] = 0; |
| dev_priv->pipestat[1] = 0; |
| |
| /* |
| * Enable some error detection, note the instruction error mask |
| * bit is reserved, so we leave it masked. |
| */ |
| if (IS_G4X(dev)) { |
| error_mask = ~(GM45_ERROR_PAGE_TABLE | |
| GM45_ERROR_MEM_PRIV | |
| GM45_ERROR_CP_PRIV | |
| I915_ERROR_MEMORY_REFRESH); |
| } else { |
| error_mask = ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH); |
| } |
| I915_WRITE(EMR, error_mask); |
| |
| I915_WRITE(IMR, dev_priv->irq_mask); |
| I915_WRITE(IER, enable_mask); |
| POSTING_READ(IER); |
| |
| /* Note HDMI and DP share hotplug bits */ |
| hotplug_en = 0; |
| if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMIB_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMIC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) |
| hotplug_en |= HDMID_HOTPLUG_INT_EN; |
| if (IS_G4X(dev)) { |
| if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X) |
| hotplug_en |= SDVOC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X) |
| hotplug_en |= SDVOB_HOTPLUG_INT_EN; |
| } else { |
| if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965) |
| hotplug_en |= SDVOC_HOTPLUG_INT_EN; |
| if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965) |
| hotplug_en |= SDVOB_HOTPLUG_INT_EN; |
| } |
| if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) { |
| hotplug_en |= CRT_HOTPLUG_INT_EN; |
| |
| /* Programming the CRT detection parameters tends |
| to generate a spurious hotplug event about three |
| seconds later. So just do it once. |
| */ |
| if (IS_G4X(dev)) |
| hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; |
| hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; |
| } |
| |
| /* Ignore TV since it's buggy */ |
| |
| I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); |
| |
| intel_opregion_enable_asle(dev); |
| |
| return 0; |
| } |
| |
| static irqreturn_t i965_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 iir, new_iir; |
| u32 pipe_stats[I915_MAX_PIPES]; |
| unsigned long irqflags; |
| int irq_received; |
| int ret = IRQ_NONE, pipe; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| iir = I915_READ(IIR); |
| |
| for (;;) { |
| bool blc_event = false; |
| |
| irq_received = iir != 0; |
| |
| /* Can't rely on pipestat interrupt bit in iir as it might |
| * have been cleared after the pipestat interrupt was received. |
| * It doesn't set the bit in iir again, but it still produces |
| * interrupts (for non-MSI). |
| */ |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) |
| i915_handle_error(dev, false); |
| |
| for_each_pipe(pipe) { |
| int reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| */ |
| if (pipe_stats[pipe] & 0x8000ffff) { |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| DRM_DEBUG_DRIVER("pipe %c underrun\n", |
| pipe_name(pipe)); |
| I915_WRITE(reg, pipe_stats[pipe]); |
| irq_received = 1; |
| } |
| } |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| if (!irq_received) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* Consume port. Then clear IIR or we'll miss events */ |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) { |
| u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); |
| |
| DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n", |
| hotplug_status); |
| if (hotplug_status & dev_priv->hotplug_supported_mask) |
| queue_work(dev_priv->wq, |
| &dev_priv->hotplug_work); |
| |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| I915_READ(PORT_HOTPLUG_STAT); |
| } |
| |
| I915_WRITE(IIR, iir); |
| new_iir = I915_READ(IIR); /* Flush posted writes */ |
| |
| if (iir & I915_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[RCS]); |
| if (iir & I915_BSD_USER_INTERRUPT) |
| notify_ring(dev, &dev_priv->ring[VCS]); |
| |
| if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) |
| intel_prepare_page_flip(dev, 0); |
| |
| if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) |
| intel_prepare_page_flip(dev, 1); |
| |
| for_each_pipe(pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS && |
| drm_handle_vblank(dev, pipe)) { |
| i915_pageflip_stall_check(dev, pipe); |
| intel_finish_page_flip(dev, pipe); |
| } |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| } |
| |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev); |
| |
| /* With MSI, interrupts are only generated when iir |
| * transitions from zero to nonzero. If another bit got |
| * set while we were handling the existing iir bits, then |
| * we would never get another interrupt. |
| * |
| * This is fine on non-MSI as well, as if we hit this path |
| * we avoid exiting the interrupt handler only to generate |
| * another one. |
| * |
| * Note that for MSI this could cause a stray interrupt report |
| * if an interrupt landed in the time between writing IIR and |
| * the posting read. This should be rare enough to never |
| * trigger the 99% of 100,000 interrupts test for disabling |
| * stray interrupts. |
| */ |
| iir = new_iir; |
| } |
| |
| i915_update_dri1_breadcrumb(dev); |
| |
| return ret; |
| } |
| |
| static void i965_irq_uninstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int pipe; |
| |
| if (!dev_priv) |
| return; |
| |
| I915_WRITE(PORT_HOTPLUG_EN, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), 0); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| |
| for_each_pipe(pipe) |
| I915_WRITE(PIPESTAT(pipe), |
| I915_READ(PIPESTAT(pipe)) & 0x8000ffff); |
| I915_WRITE(IIR, I915_READ(IIR)); |
| } |
| |
| void intel_irq_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); |
| INIT_WORK(&dev_priv->error_work, i915_error_work_func); |
| INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); |
| INIT_WORK(&dev_priv->parity_error_work, ivybridge_parity_work); |
| |
| dev->driver->get_vblank_counter = i915_get_vblank_counter; |
| dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ |
| if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) { |
| dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ |
| dev->driver->get_vblank_counter = gm45_get_vblank_counter; |
| } |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp; |
| else |
| dev->driver->get_vblank_timestamp = NULL; |
| dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; |
| |
| if (IS_VALLEYVIEW(dev)) { |
| dev->driver->irq_handler = valleyview_irq_handler; |
| dev->driver->irq_preinstall = valleyview_irq_preinstall; |
| dev->driver->irq_postinstall = valleyview_irq_postinstall; |
| dev->driver->irq_uninstall = valleyview_irq_uninstall; |
| dev->driver->enable_vblank = valleyview_enable_vblank; |
| dev->driver->disable_vblank = valleyview_disable_vblank; |
| } else if (IS_IVYBRIDGE(dev)) { |
| /* Share pre & uninstall handlers with ILK/SNB */ |
| dev->driver->irq_handler = ivybridge_irq_handler; |
| dev->driver->irq_preinstall = ironlake_irq_preinstall; |
| dev->driver->irq_postinstall = ivybridge_irq_postinstall; |
| dev->driver->irq_uninstall = ironlake_irq_uninstall; |
| dev->driver->enable_vblank = ivybridge_enable_vblank; |
| dev->driver->disable_vblank = ivybridge_disable_vblank; |
| } else if (IS_HASWELL(dev)) { |
| /* Share interrupts handling with IVB */ |
| dev->driver->irq_handler = ivybridge_irq_handler; |
| dev->driver->irq_preinstall = ironlake_irq_preinstall; |
| dev->driver->irq_postinstall = ivybridge_irq_postinstall; |
| dev->driver->irq_uninstall = ironlake_irq_uninstall; |
| dev->driver->enable_vblank = ivybridge_enable_vblank; |
| dev->driver->disable_vblank = ivybridge_disable_vblank; |
| } else if (HAS_PCH_SPLIT(dev)) { |
| dev->driver->irq_handler = ironlake_irq_handler; |
| dev->driver->irq_preinstall = ironlake_irq_preinstall; |
| dev->driver->irq_postinstall = ironlake_irq_postinstall; |
| dev->driver->irq_uninstall = ironlake_irq_uninstall; |
| dev->driver->enable_vblank = ironlake_enable_vblank; |
| dev->driver->disable_vblank = ironlake_disable_vblank; |
| } else { |
| if (INTEL_INFO(dev)->gen == 2) { |
| dev->driver->irq_preinstall = i8xx_irq_preinstall; |
| dev->driver->irq_postinstall = i8xx_irq_postinstall; |
| dev->driver->irq_handler = i8xx_irq_handler; |
| dev->driver->irq_uninstall = i8xx_irq_uninstall; |
| } else if (INTEL_INFO(dev)->gen == 3) { |
| /* IIR "flip pending" means done if this bit is set */ |
| I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); |
| |
| dev->driver->irq_preinstall = i915_irq_preinstall; |
| dev->driver->irq_postinstall = i915_irq_postinstall; |
| dev->driver->irq_uninstall = i915_irq_uninstall; |
| dev->driver->irq_handler = i915_irq_handler; |
| } else { |
| dev->driver->irq_preinstall = i965_irq_preinstall; |
| dev->driver->irq_postinstall = i965_irq_postinstall; |
| dev->driver->irq_uninstall = i965_irq_uninstall; |
| dev->driver->irq_handler = i965_irq_handler; |
| } |
| dev->driver->enable_vblank = i915_enable_vblank; |
| dev->driver->disable_vblank = i915_disable_vblank; |
| } |
| } |