usb/uas: use unique tags for all LUNs
I observed that on a device with multiple LUNs UAS was re-using the same
tag number for requests which were issued at the same time to both LUNs.
This patch uses scsi_init_shared_tag_map() to use unique tags for all
LUNs. With this patch I haven't seen the same tag number during the init
sequence anymore. Tag 1 is used for devices which do not adverise
command queueing.
This patch initilizes the queue before adding the scsi host like the
other two user in tree.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 9dd4aaee..6974f4b 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -684,6 +684,17 @@
}
}
+static void uas_free_streams(struct uas_dev_info *devinfo)
+{
+ struct usb_device *udev = devinfo->udev;
+ struct usb_host_endpoint *eps[3];
+
+ eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+ eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+ eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+ usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL);
+}
+
/*
* XXX: What I'd like to do here is register a SCSI host for each USB host in
* the system. Follow usb-storage's design of registering a SCSI host for
@@ -713,18 +724,26 @@
shost->max_id = 1;
shost->sg_tablesize = udev->bus->sg_tablesize;
- result = scsi_add_host(shost, &intf->dev);
- if (result)
- goto free;
- shost->hostdata[0] = (unsigned long)devinfo;
-
devinfo->intf = intf;
devinfo->udev = udev;
uas_configure_endpoints(devinfo);
+ result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 1);
+ if (result)
+ goto free;
+
+ result = scsi_add_host(shost, &intf->dev);
+ if (result)
+ goto deconfig_eps;
+
+ shost->hostdata[0] = (unsigned long)devinfo;
+
scsi_scan_host(shost);
usb_set_intfdata(intf, shost);
return result;
+
+deconfig_eps:
+ uas_free_streams(devinfo);
free:
kfree(devinfo);
if (shost)
@@ -746,18 +765,11 @@
static void uas_disconnect(struct usb_interface *intf)
{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct usb_host_endpoint *eps[3];
struct Scsi_Host *shost = usb_get_intfdata(intf);
struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
scsi_remove_host(shost);
-
- eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
- eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
- eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
- usb_free_streams(intf, eps, 3, GFP_KERNEL);
-
+ uas_free_streams(devinfo);
kfree(devinfo);
}