[SCSI] qla2xxx: Add BSG interface for read/write serdes register.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index aa57bf0..f15d03e 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -2022,6 +2022,46 @@
}
static int
+qla26xx_serdes_op(struct fc_bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ int rval = 0;
+ struct qla_serdes_reg sr;
+
+ memset(&sr, 0, sizeof(sr));
+
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, &sr, sizeof(sr));
+
+ switch (sr.cmd) {
+ case INT_SC_SERDES_WRITE_REG:
+ rval = qla2x00_write_serdes_word(vha, sr.addr, sr.val);
+ bsg_job->reply->reply_payload_rcv_len = 0;
+ break;
+ case INT_SC_SERDES_READ_REG:
+ rval = qla2x00_read_serdes_word(vha, sr.addr, &sr.val);
+ sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, &sr, sizeof(sr));
+ bsg_job->reply->reply_payload_rcv_len = sizeof(sr);
+ break;
+ default:
+ ql_log(ql_log_warn, vha, 0x708c,
+ "Unknown serdes cmd %x.\n", sr.cmd);
+ rval = -EDOM;
+ break;
+ }
+
+ bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+ rval ? EXT_STATUS_MAILBOX : 0;
+
+ bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+ bsg_job->reply->result = DID_OK << 16;
+ bsg_job->job_done(bsg_job);
+ return 0;
+}
+
+static int
qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
{
switch (bsg_job->request->rqst_data.h_vendor.vendor_cmd[0]) {
@@ -2069,6 +2109,10 @@
case QL_VND_FX00_MGMT_CMD:
return qlafx00_mgmt_cmd(bsg_job);
+
+ case QL_VND_SERDES_OP:
+ return qla26xx_serdes_op(bsg_job);
+
default:
return -ENOSYS;
}
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 04f7703..e5c2126 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -23,6 +23,7 @@
#define QL_VND_WRITE_I2C 0x10
#define QL_VND_READ_I2C 0x11
#define QL_VND_FX00_MGMT_CMD 0x12
+#define QL_VND_SERDES_OP 0x13
/* BSG Vendor specific subcode returns */
#define EXT_STATUS_OK 0
@@ -212,4 +213,16 @@
uint8_t buffer[0x40];
} __packed;
+/* 26xx serdes register interface */
+
+/* serdes reg commands */
+#define INT_SC_SERDES_READ_REG 1
+#define INT_SC_SERDES_WRITE_REG 2
+
+struct qla_serdes_reg {
+ uint16_t cmd;
+ uint16_t addr;
+ uint16_t val;
+} __packed;
+
#endif
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 66f6597..9cd767c 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -12,7 +12,7 @@
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x015b | 0x4b,0xba,0xfa |
- * | Mailbox commands | 0x1181 | 0x111a-0x111b |
+ * | Mailbox commands | 0x1187 | 0x111a-0x111b |
* | | | 0x1155-0x1158 |
* | | | 0x1018-0x1019 |
* | | | 0x1115-0x1116 |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ac62bca..41d6491 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -862,7 +862,6 @@
*/
#define MBC_LOAD_RAM 1 /* Load RAM. */
#define MBC_EXECUTE_FIRMWARE 2 /* Execute firmware. */
-#define MBC_WRITE_RAM_WORD 4 /* Write RAM word. */
#define MBC_READ_RAM_WORD 5 /* Read RAM word. */
#define MBC_MAILBOX_REGISTER_TEST 6 /* Wrap incoming mailboxes */
#define MBC_VERIFY_CHECKSUM 7 /* Verify checksum. */
@@ -937,6 +936,8 @@
/*
* ISP24xx mailbox commands
*/
+#define MBC_WRITE_SERDES 0x3 /* Write serdes word. */
+#define MBC_READ_SERDES 0x4 /* Read serdes word. */
#define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */
#define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */
#define MBC_PORT_PARAMS 0x1A /* Port iDMA Parameters. */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 359d0d9..00427e0 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -341,6 +341,11 @@
qla2x00_system_error(scsi_qla_host_t *);
extern int
+qla2x00_write_serdes_word(scsi_qla_host_t *, uint16_t, uint16_t);
+extern int
+qla2x00_read_serdes_word(scsi_qla_host_t *, uint16_t, uint16_t *);
+
+extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
extern int
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 5957fee..b94511a 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2800,6 +2800,75 @@
return rval;
}
+int
+qla2x00_write_serdes_word(scsi_qla_host_t *vha, uint16_t addr, uint16_t data)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA2031(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1182,
+ "Entered %s.\n", __func__);
+
+ mcp->mb[0] = MBC_WRITE_SERDES;
+ mcp->mb[1] = addr;
+ mcp->mb[2] = data & 0xff;
+ mcp->mb[3] = 0;
+ mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1183,
+ "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1184,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
+int
+qla2x00_read_serdes_word(scsi_qla_host_t *vha, uint16_t addr, uint16_t *data)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA2031(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1185,
+ "Entered %s.\n", __func__);
+
+ mcp->mb[0] = MBC_READ_SERDES;
+ mcp->mb[1] = addr;
+ mcp->mb[3] = 0;
+ mcp->out_mb = MBX_3|MBX_1|MBX_0;
+ mcp->in_mb = MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ *data = mcp->mb[1] & 0xff;
+
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1186,
+ "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
+ } else {
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1187,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
/**
* qla2x00_set_serdes_params() -
* @ha: HA context