dmaengine: move drivers to dma_transfer_direction
fixup usage of dma direction by introducing dma_transfer_direction,
this patch moves dma/drivers/* to use new enum
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Zhang Wei <zw@zh-kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Yong Wang <yong.y.wang@intel.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Cc: Barry Song <Baohua.Song@csr.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index b7cbd1a..41c62fd 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -882,9 +882,9 @@
ch->signal = ret;
/* Assign the flow control signal to this channel */
- if (txd->direction == DMA_TO_DEVICE)
+ if (txd->direction == DMA_MEM_TO_DEV)
txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
- else if (txd->direction == DMA_FROM_DEVICE)
+ else if (txd->direction == DMA_DEV_TO_MEM)
txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
}
@@ -1102,10 +1102,10 @@
/* Transfer direction */
plchan->runtime_direction = config->direction;
- if (config->direction == DMA_TO_DEVICE) {
+ if (config->direction == DMA_MEM_TO_DEV) {
addr_width = config->dst_addr_width;
maxburst = config->dst_maxburst;
- } else if (config->direction == DMA_FROM_DEVICE) {
+ } else if (config->direction == DMA_DEV_TO_MEM) {
addr_width = config->src_addr_width;
maxburst = config->src_maxburst;
} else {
@@ -1136,7 +1136,7 @@
cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
- if (plchan->runtime_direction == DMA_FROM_DEVICE) {
+ if (plchan->runtime_direction == DMA_DEV_TO_MEM) {
plchan->src_addr = config->src_addr;
plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
pl08x_select_bus(plchan->cd->periph_buses,
@@ -1152,7 +1152,7 @@
"configured channel %s (%s) for %s, data width %d, "
"maxburst %d words, LE, CCTL=0x%08x\n",
dma_chan_name(chan), plchan->name,
- (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+ (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
addr_width,
maxburst,
cctl);
@@ -1322,7 +1322,7 @@
static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
struct dma_chan *chan, struct scatterlist *sgl,
- unsigned int sg_len, enum dma_data_direction direction,
+ unsigned int sg_len, enum dma_transfer_direction direction,
unsigned long flags)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
@@ -1354,10 +1354,10 @@
*/
txd->direction = direction;
- if (direction == DMA_TO_DEVICE) {
+ if (direction == DMA_MEM_TO_DEV) {
txd->cctl = plchan->dst_cctl;
slave_addr = plchan->dst_addr;
- } else if (direction == DMA_FROM_DEVICE) {
+ } else if (direction == DMA_DEV_TO_MEM) {
txd->cctl = plchan->src_cctl;
slave_addr = plchan->src_addr;
} else {
@@ -1368,10 +1368,10 @@
}
if (plchan->cd->device_fc)
- tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
+ tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
PL080_FLOW_PER2MEM_PER;
else
- tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
+ tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER :
PL080_FLOW_PER2MEM;
txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
@@ -1387,7 +1387,7 @@
list_add_tail(&dsg->node, &txd->dsg_list);
dsg->len = sg_dma_len(sg);
- if (direction == DMA_TO_DEVICE) {
+ if (direction == DMA_MEM_TO_DEV) {
dsg->src_addr = sg_phys(sg);
dsg->dst_addr = slave_addr;
} else {