serial: isicom.c: use pr_fmt and pr_<level>
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks to pr_<level>
Convert some embedded function names to %s...__func__
Remove a period after exclamation points.
Remove #define pr_dbg which could be used by future kernel.h includes
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 300d5bd..77d5a29 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -113,6 +113,8 @@
* 64-bit verification
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
@@ -140,7 +142,6 @@
#define InterruptTheCard(base) outw(0, (base) + 0xc)
#define ClearInterrupt(base) inw((base) + 0x0a)
-#define pr_dbg(str...) pr_debug("ISICOM: " str)
#ifdef DEBUG
#define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c))
#else
@@ -249,8 +250,7 @@
spin_unlock_irqrestore(&card->card_lock, card->flags);
msleep(10);
}
- printk(KERN_WARNING "ISICOM: Failed to lock Card (0x%lx)\n",
- card->base);
+ pr_warning("Failed to lock Card (0x%lx)\n", card->base);
return 0; /* Failed to acquire the card! */
}
@@ -379,13 +379,13 @@
char *name, const char *routine)
{
if (!port) {
- printk(KERN_WARNING "ISICOM: Warning: bad isicom magic for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: bad isicom magic for dev %s in %s.\n",
+ name, routine);
return 1;
}
if (port->magic != ISICOM_MAGIC) {
- printk(KERN_WARNING "ISICOM: Warning: NULL isicom port for "
- "dev %s in %s.\n", name, routine);
+ pr_warning("Warning: NULL isicom port for dev %s in %s.\n",
+ name, routine);
return 1;
}
@@ -450,8 +450,8 @@
if (!(inw(base + 0x02) & (1 << port->channel)))
continue;
- pr_dbg("txing %d bytes, port%d.\n", txcount,
- port->channel + 1);
+ pr_debug("txing %d bytes, port%d.\n",
+ txcount, port->channel + 1);
outw((port->channel << isi_card[card].shift_count) | txcount,
base);
residue = NO;
@@ -547,8 +547,8 @@
byte_count = header & 0xff;
if (channel + 1 > card->port_count) {
- printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
- "%d(channel) > port_count.\n", base, channel+1);
+ pr_warning("%s(0x%lx): %d(channel) > port_count.\n",
+ __func__, base, channel+1);
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
@@ -582,14 +582,15 @@
if (port->status & ISI_DCD) {
if (!(header & ISI_DCD)) {
/* Carrier has been lost */
- pr_dbg("interrupt: DCD->low.\n"
- );
+ pr_debug("%s: DCD->low.\n",
+ __func__);
port->status &= ~ISI_DCD;
tty_hangup(tty);
}
} else if (header & ISI_DCD) {
/* Carrier has been detected */
- pr_dbg("interrupt: DCD->high.\n");
+ pr_debug("%s: DCD->high.\n",
+ __func__);
port->status |= ISI_DCD;
wake_up_interruptible(&port->port.open_wait);
}
@@ -641,17 +642,19 @@
break;
case 2: /* Statistics */
- pr_dbg("isicom_interrupt: stats!!!.\n");
+ pr_debug("%s: stats!!!\n", __func__);
break;
default:
- pr_dbg("Intr: Unknown code in status packet.\n");
+ pr_debug("%s: Unknown code in status packet.\n",
+ __func__);
break;
}
} else { /* Data Packet */
count = tty_prepare_flip_string(tty, &rp, byte_count & ~1);
- pr_dbg("Intr: Can rx %d of %d bytes.\n", count, byte_count);
+ pr_debug("%s: Can rx %d of %d bytes.\n",
+ __func__, count, byte_count);
word_count = count >> 1;
insw(base, rp, word_count);
byte_count -= (word_count << 1);
@@ -661,8 +664,8 @@
byte_count -= 2;
}
if (byte_count > 0) {
- pr_dbg("Intr(0x%lx:%d): Flip buffer overflow! dropping "
- "bytes...\n", base, channel + 1);
+ pr_debug("%s(0x%lx:%d): Flip buffer overflow! dropping bytes...\n",
+ __func__, base, channel + 1);
/* drain out unread xtra data */
while (byte_count > 0) {
inw(base);
@@ -888,8 +891,8 @@
struct isi_board *card = port->card;
if (--card->count < 0) {
- pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n",
- card->base, card->count);
+ pr_debug("%s: bad board(0x%lx) count %d.\n",
+ __func__, card->base, card->count);
card->count = 0;
}
/* last port was closed, shutdown that board too */
@@ -1681,13 +1684,13 @@
retval = tty_register_driver(isicom_normal);
if (retval) {
- pr_dbg("Couldn't register the dialin driver\n");
+ pr_debug("Couldn't register the dialin driver\n");
goto err_puttty;
}
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
- printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
+ pr_err("Unable to register pci driver.\n");
goto err_unrtty;
}