ARM: shmobile: r8a7740: add DMAEngine support for USB
Current shdmac can support USB DMAC on r8a7740.
This support reduce CPU duty when USB access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 320c43a..5e84609e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -501,6 +501,92 @@
},
};
+/* USB-DMAC */
+/* Transmit sizes and respective CHCR register values */
+enum {
+ USBTS_XMIT_SZ_8BYTE = 0,
+ USBTS_XMIT_SZ_16BYTE = 1,
+ USBTS_XMIT_SZ_32BYTE = 2,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_usbts_shift[] = {
+ [USBTS_XMIT_SZ_8BYTE] = 3,
+ [USBTS_XMIT_SZ_16BYTE] = 4,
+ [USBTS_XMIT_SZ_32BYTE] = 5,
+};
+
+static const struct sh_dmae_channel r8a7740_usb_dma_channels[] = {
+ {
+ .offset = 0,
+ }, {
+ .offset = 0x20,
+ },
+};
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+static const struct sh_dmae_slave_config r8a7740_usb_dma_slaves[] = {
+ {
+ .slave_id = SHDMA_SLAVE_USBHS_TX,
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
+ }, {
+ .slave_id = SHDMA_SLAVE_USBHS_RX,
+ .chcr = USBTS_INDEX2VAL(USBTS_XMIT_SZ_8BYTE),
+ },
+};
+
+static struct sh_dmae_pdata usb_dma_platform_data = {
+ .slave = r8a7740_usb_dma_slaves,
+ .slave_num = ARRAY_SIZE(r8a7740_usb_dma_slaves),
+ .channel = r8a7740_usb_dma_channels,
+ .channel_num = ARRAY_SIZE(r8a7740_usb_dma_channels),
+ .ts_low_shift = 6,
+ .ts_low_mask = 0xc0,
+ .ts_high_shift = 0,
+ .ts_high_mask = 0,
+ .ts_shift = dma_usbts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_usbts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chcr_offset = 0x14,
+ .chcr_ie_bit = 1 << 5,
+ .dmaor_is_32bit = 1,
+ .needs_tend_set = 1,
+ .no_dmars = 1,
+ .slave_only = 1,
+};
+
+static struct resource r8a7740_usb_dma_resources[] = {
+ {
+ /* Channel registers and DMAOR */
+ .start = 0xe68a0020,
+ .end = 0xe68a0064 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* VCR/SWR/DMICR */
+ .start = 0xe68a0000,
+ .end = 0xe68a0014 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* IRQ for channels */
+ .start = evt2irq(0x0a00),
+ .end = evt2irq(0x0a00),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_dma_device = {
+ .name = "sh-dma-engine",
+ .id = 3,
+ .resource = r8a7740_usb_dma_resources,
+ .num_resources = ARRAY_SIZE(r8a7740_usb_dma_resources),
+ .dev = {
+ .platform_data = &usb_dma_platform_data,
+ },
+};
+
/* I2C */
static struct resource i2c0_resources[] = {
[0] = {
@@ -550,6 +636,7 @@
&dma0_device,
&dma1_device,
&dma2_device,
+ &usb_dma_device,
};
/*