S2io: fix statistics flush after a MTU change
On s2io driver, when you change the interface MTU, it invokes a card
reset, which flush some statistics. This patch solves this problem, and
also set the net_device->stats as the default statistics structure,
instead of s2io_nic->stats.
To do that, s2io_nic->stats turned into a staging area, where is saved
statistics of the last hardware statistics query. So, the difference
between the current hardware statistics and s2io_nic->stats, is the
value that should be summed up, in order to get the correct statistics
value, even after a reset.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 86d77d0..a2b0730 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3143,7 +3143,7 @@
pkt_cnt++;
/* Updating the statistics block */
- nic->stats.tx_bytes += skb->len;
+ nic->dev->stats.tx_bytes += skb->len;
nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
@@ -4896,25 +4896,42 @@
/* Configure Stats for immediate updt */
s2io_updt_stats(sp);
+ /* Using sp->stats as a staging area, because reset (due to mtu
+ change, for example) will clear some hardware counters */
+ dev->stats.tx_packets +=
+ le32_to_cpu(mac_control->stats_info->tmac_frms) -
+ sp->stats.tx_packets;
sp->stats.tx_packets =
le32_to_cpu(mac_control->stats_info->tmac_frms);
+ dev->stats.tx_errors +=
+ le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) -
+ sp->stats.tx_errors;
sp->stats.tx_errors =
le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+ dev->stats.rx_errors +=
+ le64_to_cpu(mac_control->stats_info->rmac_drop_frms) -
+ sp->stats.rx_errors;
sp->stats.rx_errors =
le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
+ dev->stats.multicast =
+ le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) -
+ sp->stats.multicast;
sp->stats.multicast =
le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
+ dev->stats.rx_length_errors =
+ le64_to_cpu(mac_control->stats_info->rmac_long_frms) -
+ sp->stats.rx_length_errors;
sp->stats.rx_length_errors =
le64_to_cpu(mac_control->stats_info->rmac_long_frms);
/* collect per-ring rx_packets and rx_bytes */
- sp->stats.rx_packets = sp->stats.rx_bytes = 0;
+ dev->stats.rx_packets = dev->stats.rx_bytes = 0;
for (i = 0; i < config->rx_ring_num; i++) {
- sp->stats.rx_packets += mac_control->rings[i].rx_packets;
- sp->stats.rx_bytes += mac_control->rings[i].rx_bytes;
+ dev->stats.rx_packets += mac_control->rings[i].rx_packets;
+ dev->stats.rx_bytes += mac_control->rings[i].rx_bytes;
}
- return (&sp->stats);
+ return (&dev->stats);
}
/**
@@ -7419,7 +7436,7 @@
if (err_mask != 0x5) {
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
dev->name, err_mask);
- sp->stats.rx_crc_errors++;
+ dev->stats.rx_crc_errors++;
sp->mac_control.stats_info->sw_stat.mem_freed
+= skb->truesize;
dev_kfree_skb(skb);