ixgbe: Only set/clear VFE in ixgbe_set_rx_mode
There appears to be a stray setting of the VFE bit when registering vlans.
This should not be done as vlan filtering should be enabled any time the
interface is not in promiscous mode
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a3a2a9a..5182b28 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2336,23 +2336,25 @@
* not in DCB mode.
*/
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+
+ /* Disable CFI check */
+ ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+
+ /* enable VLAN tag stripping */
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
- ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE;
- ctrl &= ~IXGBE_VLNCTRL_CFIEN;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+ ctrl |= IXGBE_VLNCTRL_VME;
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
- ctrl |= IXGBE_VLNCTRL_VFE;
- /* enable VLAN tag insert/strip */
- ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
- ctrl &= ~IXGBE_VLNCTRL_CFIEN;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
for (i = 0; i < adapter->num_rx_queues; i++) {
+ u32 ctrl;
j = adapter->rx_ring[i].reg_idx;
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(j));
ctrl |= IXGBE_RXDCTL_VME;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(j), ctrl);
}
}
+
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+
ixgbe_vlan_rx_add_vid(netdev, 0);
if (!test_bit(__IXGBE_DOWN, &adapter->state))