| /* |
| * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8917-cdp-mirror-lake-touch.dtsi" |
| #include "msm8917-audio-cdp.dtsi" |
| |
| &soc { |
| led_flash0: qcom,camera-flash { |
| cell-index = <0>; |
| compatible = "qcom,camera-flash"; |
| qcom,flash-type = <1>; |
| qcom,flash-source = <&pmi8950_flash0 &pmi8950_flash1>; |
| qcom,torch-source = <&pmi8950_torch0 &pmi8950_torch1>; |
| qcom,switch-source = <&pmi8950_switch>; |
| }; |
| |
| bluetooth: bt_qca6174 { |
| compatible = "qca,qca6174"; |
| qca,bt-reset-gpio = <&tlmm 129 0>; /* BT_EN */ |
| }; |
| }; |
| |
| &qpnp_smbcharger { |
| /delete-property/ dpdm-supply; |
| }; |
| |
| &pm8937_gpios { |
| gpio@c400 { |
| qcom,mode = <0>; |
| qcom,output-type = <0>; |
| qcom,pull = <0>; |
| qcom,vin-sel = <2>; |
| qcom,out-strength = <3>; |
| qcom,src-sel = <0>; |
| qcom,master-en = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| &i2c_5 { /* BLSP2 QUP1 */ |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&tlmm 17 0x00>; |
| qcom,nq-ven = <&tlmm 16 0x00>; |
| qcom,nq-firm = <&tlmm 130 0x00>; |
| qcom,nq-clkreq = <&pm8937_gpios 5 0x00>; |
| interrupt-parent = <&tlmm>; |
| qcom,clk-src = "BBCLK2"; |
| interrupts = <17 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active &nfc_disable_active>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>; |
| clocks = <&clock_gcc clk_bb_clk2_pin>; |
| clock-names = "ref_clk"; |
| }; |
| }; |
| |
| &mdss_dsi0 { |
| lab-supply = <&lab_regulator>; |
| ibb-supply = <&ibb_regulator>; |
| }; |
| |
| &labibb { |
| status = "ok"; |
| qpnp,qpnp-labibb-mode = "lcd"; |
| }; |
| |
| &ibb_regulator { |
| qcom,qpnp-ibb-discharge-resistor = <32>; |
| }; |
| |
| &dsi_panel_pwr_supply { |
| qcom,panel-supply-entry@2 { |
| reg = <2>; |
| qcom,supply-name = "lab"; |
| qcom,supply-min-voltage = <4600000>; |
| qcom,supply-max-voltage = <6000000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| }; |
| |
| qcom,panel-supply-entry@3 { |
| reg = <3>; |
| qcom,supply-name = "ibb"; |
| qcom,supply-min-voltage = <4600000>; |
| qcom,supply-max-voltage = <6000000>; |
| qcom,supply-enable-load = <100000>; |
| qcom,supply-disable-load = <100>; |
| qcom,supply-post-on-sleep = <20>; |
| }; |
| }; |