blob: 4081dcf2d550aab976380b2a45f41ee9c0ced996 [file] [log] [blame]
/*
* Copyright (c) 2016, 2018-2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/clock/msm-clocks-8952.h>
#include "msm8937-camera-sensor-mtp.dtsi"
&blsp1_uart2 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&uart_console_active>;
};
&sdhc_1 {
/* device core power supply */
vdd-supply = <&pm8937_l8>;
qcom,vdd-voltage-level = <2900000 2900000>;
qcom,vdd-current-level = <200 570000>;
/* device communication power supply */
vdd-io-supply = <&pm8937_l5>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <200 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000
384000000>;
qcom,nonremovable;
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
status = "ok";
};
&sdhc_2 {
/* device core power supply */
vdd-supply = <&pm8937_l11>;
qcom,vdd-voltage-level = <2950000 2950000>;
qcom,vdd-current-level = <15000 800000>;
/* device communication power supply */
vdd-io-supply = <&pm8937_l12>;
qcom,vdd-io-voltage-level = <1800000 2950000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
cd-gpios = <&tlmm 67 0x1>;
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
200000000>;
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
status = "ok";
};
#include "msm8937-mdss-panels.dtsi"
&mdss_mdp {
qcom,mdss-pref-prim-intf = "dsi";
};
&mdss_dsi {
hw-config = "single_dsi";
};
&mdss_dsi0 {
qcom,dsi-pref-prim-pan = <&dsi_truly_1080_vid>;
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
qcom,platform-te-gpio = <&tlmm 24 0>;
qcom,platform-reset-gpio = <&tlmm 61 0>;
qcom,platform-bklight-en-gpio = <&tlmm 59 0>;
};
&mdss_dsi1 {
status = "disabled";
qcom,dsi-pref-prim-pan = <&dsi_adv7533_1080p>;
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
qcom,pluggable;
qcom,platform-te-gpio = <&tlmm 24 0>;
qcom,platform-reset-gpio = <&tlmm 61 0>;
qcom,platform-bklight-en-gpio = <&tlmm 59 0>;
};
&dsi_truly_1080_vid {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-pan-enable-dynamic-fps;
qcom,mdss-dsi-min-refresh-rate = <48>;
qcom,mdss-dsi-max-refresh-rate = <60>;
qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
};
&dsi_truly_1080_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,ulps-enabled;
qcom,partial-update-enabled;
qcom,panel-roi-alignment = <2 2 4 2 1080 2>;
};
&soc {
gpio_keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_key_active>;
camera_focus {
label = "camera_focus";
gpios = <&tlmm 128 0x1>;
linux,input-type = <1>;
linux,code = <0x210>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
camera_snapshot {
label = "camera_snapshot";
gpios = <&tlmm 127 0x1>;
linux,input-type = <1>;
linux,code = <0x2fe>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
vol_up {
label = "volume_up";
gpios = <&tlmm 91 0x1>;
linux,input-type = <1>;
linux,code = <115>;
debounce-interval = <15>;
linux,can-disable;
gpio-key,wakeup;
};
};
};
&pm8937_gpios {
nfc_clk {
nfc_clk_default: nfc_clk_default {
pins = "gpio5";
function = "normal";
input-enable;
power-source = <1>;
};
};
};
&i2c_5 { /* BLSP2 QUP1 (NFC) */
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
nq@28 {
compatible = "qcom,nq-nci";
reg = <0x28>;
qcom,nq-irq = <&tlmm 17 0x00>;
qcom,nq-ven = <&tlmm 16 0x00>;
qcom,nq-firm = <&tlmm 130 0x00>;
qcom,nq-clkreq = <&pm8937_gpios 5 0x00>;
interrupt-parent = <&tlmm>;
qcom,clk-src = "BBCLK2";
interrupts = <17 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active &nfc_disable_active
&nfc_clk_default>;
pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>;
clocks = <&clock_gcc clk_bb_clk2_pin>;
clock-names = "ref_clk";
};
};
&thermal_zones {
quiet-therm-step {
status = "disabled";
};
};