| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/msm/power-on.h> |
| #include <dt-bindings/spmi/spmi.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| &spmi_bus { |
| |
| qcom,pmi8937@2 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x2 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pmi8937_revid: qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| }; |
| |
| qcom,power-on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| qcom,secondary-pon-reset; |
| qcom,hard-reset-poweroff-type = |
| <PON_POWER_OFF_SHUTDOWN>; |
| |
| pon_perph_reg: qcom,pon_perph_reg { |
| regulator-name = "pon_spare_reg"; |
| qcom,pon-spare-reg-addr = <0x8c>; |
| qcom,pon-spare-reg-bit = <1>; |
| }; |
| }; |
| |
| pmi8937_vadc: vadc@3100 { |
| compatible = "qcom,qpnp-vadc"; |
| reg = <0x3100 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| qcom,vadc-poll-eoc; |
| |
| chan@0 { |
| label = "usbin"; |
| reg = <0>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <4>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@1 { |
| label = "dcin"; |
| reg = <1>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <4>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@3 { |
| label = "vchg_sns"; |
| reg = <3>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@9 { |
| label = "ref_625mv"; |
| reg = <9>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@a { |
| label = "ref_1250v"; |
| reg = <0xa>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@d { |
| label = "chg_temp"; |
| reg = <0xd>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <16>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@43 { |
| label = "usb_dp"; |
| reg = <0x43>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@44 { |
| label = "usb_dm"; |
| reg = <0x44>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |
| |
| pmi8937_mpps: mpps { |
| compatible = "qcom,spmi-mpp"; |
| reg = <0xa000 0x400>; |
| interrupts = <0x2 0xa0 0 IRQ_TYPE_NONE>, |
| <0x2 0xa1 0 IRQ_TYPE_NONE>, |
| <0x2 0xa2 0 IRQ_TYPE_NONE>, |
| <0x2 0xa3 0 IRQ_TYPE_NONE>; |
| interrupt-names = "pmi8937_mpp1", "pmi8937_mpp2", |
| "pmi8937_mpp3", "pmi8937_mpp4"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| qpnp_smbcharger: qcom,qpnp-smbcharger { |
| compatible = "qcom,qpnp-smbcharger"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| qcom,iterm-ma = <100>; |
| qcom,float-voltage-mv = <4200>; |
| qcom,resume-delta-mv = <200>; |
| qcom,chg-inhibit-fg; |
| qcom,rparasitic-uohm = <100000>; |
| qcom,bms-psy-name = "bms"; |
| qcom,thermal-mitigation = <1500 700 600 0>; |
| qcom,parallel-usb-min-current-ma = <1400>; |
| qcom,parallel-usb-9v-min-current-ma = <900>; |
| qcom,parallel-allowed-lowering-ma = <500>; |
| qcom,pmic-revid = <&pmi8937_revid>; |
| qcom,force-aicl-rerun; |
| qcom,aicl-rerun-period-s = <180>; |
| qcom,autoadjust-vfloat; |
| |
| qcom,chgr@1000 { |
| reg = <0x1000 0x100>; |
| interrupts = <0x2 0x10 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x3 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x4 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x5 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x6 IRQ_TYPE_NONE>, |
| <0x2 0x10 0x7 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "chg-error", |
| "chg-inhibit", |
| "chg-prechg-sft", |
| "chg-complete-chg-sft", |
| "chg-p2f-thr", |
| "chg-rechg-thr", |
| "chg-taper-thr", |
| "chg-tcc-thr"; |
| }; |
| |
| qcom,otg@1100 { |
| reg = <0x1100 0x100>; |
| interrupts = <0x2 0x11 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x11 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x11 0x3 IRQ_TYPE_NONE>; |
| interrupt-names = "otg-fail", |
| "otg-oc", |
| "usbid-change"; |
| }; |
| |
| qcom,bat-if@1200 { |
| reg = <0x1200 0x100>; |
| interrupts = <0x2 0x12 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x3 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x4 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x5 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x6 IRQ_TYPE_NONE>, |
| <0x2 0x12 0x7 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "batt-hot", |
| "batt-warm", |
| "batt-cold", |
| "batt-cool", |
| "batt-ov", |
| "batt-low", |
| "batt-missing", |
| "batt-term-missing"; |
| }; |
| |
| qcom,usb-chgpth@1300 { |
| reg = <0x1300 0x100>; |
| interrupts = <0x2 0x13 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x13 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x13 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x13 0x5 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "usbin-uv", |
| "usbin-ov", |
| "usbin-src-det", |
| "aicl-done"; |
| }; |
| |
| qcom,dc-chgpth@1400 { |
| reg = <0x1400 0x100>; |
| interrupts = <0x2 0x14 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x14 0x1 IRQ_TYPE_NONE>; |
| interrupt-names = "dcin-uv", |
| "dcin-ov"; |
| }; |
| |
| qcom,chgr-misc@1600 { |
| reg = <0x1600 0x100>; |
| interrupts = <0x2 0x16 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x16 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x16 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x16 0x3 IRQ_TYPE_NONE>, |
| <0x2 0x16 0x4 IRQ_TYPE_NONE>, |
| <0x2 0x16 0x5 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "power-ok", |
| "temp-shutdown", |
| "wdog-timeout", |
| "flash-fail", |
| "otst2", |
| "otst3"; |
| }; |
| |
| smbcharger_charger_otg: qcom,smbcharger-boost-otg { |
| regulator-name = "smbcharger_charger_otg"; |
| }; |
| }; |
| |
| qpnp_fg: qcom,fg { |
| compatible = "qcom,qpnp-fg"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,resume-soc = <95>; |
| status = "okay"; |
| qcom,bcl-lm-threshold-ma = <127>; |
| qcom,bcl-mh-threshold-ma = <405>; |
| qcom,fg-iterm-ma = <150>; |
| qcom,fg-chg-iterm-ma = <100>; |
| qcom,pmic-revid = <&pmi8937_revid>; |
| qcom,fg-cutoff-voltage-mv = <3500>; |
| qcom,cycle-counter-en; |
| qcom,capacity-learning-on; |
| |
| qcom,fg-soc@4000 { |
| status = "okay"; |
| reg = <0x4000 0x100>; |
| interrupts = <0x2 0x40 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x40 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x40 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x40 0x3 IRQ_TYPE_NONE>, |
| <0x2 0x40 0x4 IRQ_TYPE_NONE>, |
| <0x2 0x40 0x5 IRQ_TYPE_NONE>, |
| <0x2 0x40 0x6 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "high-soc", |
| "low-soc", |
| "full-soc", |
| "empty-soc", |
| "delta-soc", |
| "first-est-done", |
| "update-soc"; |
| }; |
| |
| qcom,fg-batt@4100 { |
| reg = <0x4100 0x100>; |
| interrupts = <0x2 0x41 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x1 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x2 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x3 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x4 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x5 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x6 IRQ_TYPE_NONE>, |
| <0x2 0x41 0x7 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "soft-cold", |
| "soft-hot", |
| "vbatt-low", |
| "batt-ided", |
| "batt-id-req", |
| "batt-unknown", |
| "batt-missing", |
| "batt-match"; |
| }; |
| |
| qcom,revid-tp-rev@1f1 { |
| reg = <0x1f1 0x1>; |
| }; |
| |
| qcom,fg-memif@4400 { |
| status = "okay"; |
| reg = <0x4400 0x100>; |
| interrupts = <0x2 0x44 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x44 0x2 IRQ_TYPE_NONE>; |
| |
| interrupt-names = "mem-avail", |
| "data-rcvry-sug"; |
| }; |
| }; |
| |
| bcl@4200 { |
| compatible = "qcom,msm-bcl"; |
| reg = <0x4200 0xff>; |
| reg-names = "fg_user_adc"; |
| interrupts = <0x2 0x42 0x0 IRQ_TYPE_NONE>, |
| <0x2 0x42 0x1 IRQ_TYPE_NONE>; |
| interrupt-names = "bcl-high-ibat-int", |
| "bcl-low-vbat-int"; |
| qcom,vbat-scaling-factor = <39000>; |
| qcom,vbat-gain-numerator = <1>; |
| qcom,vbat-gain-denominator = <128>; |
| qcom,vbat-polling-delay-ms = <100>; |
| qcom,ibat-scaling-factor = <39000>; |
| qcom,ibat-gain-numerator = <1>; |
| qcom,ibat-gain-denominator = <128>; |
| qcom,ibat-offset-numerator = <1200>; |
| qcom,ibat-offset-denominator = <1>; |
| qcom,ibat-polling-delay-ms = <100>; |
| }; |
| |
| qcom,leds@a100 { |
| compatible = "qcom,leds-qpnp"; |
| reg = <0xa100 0x100>; |
| label = "mpp"; |
| }; |
| }; |
| |
| qcom,pmi8937@3 { |
| compatible ="qcom,spmi-pmic"; |
| reg = <0x3 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pmi8937_pwm: pwm@b000 { |
| status = "disabled"; |
| compatible = "qcom,qpnp-pwm"; |
| reg = <0xb000 0x100>; |
| reg-names = "qpnp-lpg-channel-base"; |
| qcom,channel-id = <0>; |
| qcom,supported-sizes = <6>, <9>; |
| #pwm-cells = <2>; |
| }; |
| |
| wled: qcom,leds@d800 { |
| compatible = "qcom,qpnp-wled"; |
| reg = <0xd800 0x100>, |
| <0xd900 0x100>; |
| reg-names = "qpnp-wled-ctrl-base", |
| "qpnp-wled-sink-base"; |
| interrupts = <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "sc-irq"; |
| status = "okay"; |
| linux,name = "wled"; |
| linux,default-trigger = "bkl-trigger"; |
| qcom,fdbk-output = "auto"; |
| qcom,vref-mv = <350>; |
| qcom,switch-freq-khz = <800>; |
| qcom,ovp-mv = <29500>; |
| qcom,ilim-ma = <980>; |
| qcom,boost-duty-ns = <26>; |
| qcom,mod-freq-khz = <9600>; |
| qcom,dim-mode = "hybrid"; |
| qcom,dim-method = "linear"; |
| qcom,hyb-thres = <625>; |
| qcom,sync-dly-us = <800>; |
| qcom,fs-curr-ua = <20000>; |
| qcom,led-strings-list = [00 01]; |
| qcom,en-ext-pfet-sc-pro; |
| qcom,pmic-revid = <&pmi8937_revid>; |
| qcom,cons-sync-write-delay-us = <1000>; |
| }; |
| |
| flash_led: qcom,leds@d300 { |
| compatible = "qcom,qpnp-flash-led"; |
| status = "okay"; |
| reg = <0xd300 0x100>; |
| label = "flash"; |
| qcom,headroom = <500>; |
| qcom,startup-dly = <128>; |
| qcom,clamp-curr = <200>; |
| qcom,pmic-charger-support; |
| qcom,self-check-enabled; |
| qcom,thermal-derate-enabled; |
| qcom,thermal-derate-threshold = <100>; |
| qcom,thermal-derate-rate = "5_PERCENT"; |
| qcom,current-ramp-enabled; |
| qcom,ramp_up_step = "6P7_US"; |
| qcom,ramp_dn_step = "6P7_US"; |
| qcom,vph-pwr-droop-enabled; |
| qcom,vph-pwr-droop-threshold = <3000>; |
| qcom,vph-pwr-droop-debounce-time = <10>; |
| qcom,headroom-sense-ch0-enabled; |
| qcom,headroom-sense-ch1-enabled; |
| qcom,pmic-revid = <&pmi8937_revid>; |
| |
| pmi8937_flash0: qcom,flash_0 { |
| label = "flash"; |
| qcom,led-name = "led:flash_0"; |
| qcom,default-led-trigger = |
| "flash0_trigger"; |
| qcom,max-current = <1000>; |
| qcom,duration = <1280>; |
| qcom,id = <0>; |
| qcom,current = <625>; |
| }; |
| |
| pmi8937_flash1: qcom,flash_1 { |
| label = "flash"; |
| qcom,led-name = "led:flash_1"; |
| qcom,default-led-trigger = |
| "flash1_trigger"; |
| qcom,max-current = <1000>; |
| qcom,duration = <1280>; |
| qcom,id = <1>; |
| qcom,current = <625>; |
| }; |
| |
| pmi8937_torch0: qcom,torch_0 { |
| label = "torch"; |
| qcom,led-name = "led:torch_0"; |
| qcom,default-led-trigger = |
| "torch0_trigger"; |
| qcom,max-current = <200>; |
| qcom,id = <0>; |
| qcom,current = <120>; |
| }; |
| |
| pmi8937_torch1: qcom,torch_1 { |
| label = "torch"; |
| qcom,led-name = "led:torch_1"; |
| qcom,default-led-trigger = |
| "torch1_trigger"; |
| qcom,max-current = <200>; |
| qcom,id = <1>; |
| qcom,current = <120>; |
| }; |
| |
| pmi8937_switch: qcom,switch { |
| label = "switch"; |
| qcom,led-name = "led:switch"; |
| qcom,default-led-trigger = |
| "switch_trigger"; |
| qcom,max-current = <1000>; |
| qcom,duration = <1280>; |
| qcom,id = <2>; |
| qcom,current = <625>; |
| reg0 { |
| regulator-name = "pon_spare_reg"; |
| }; |
| }; |
| }; |
| |
| pmi_haptic: qcom,haptics@c000 { |
| compatible = "qcom,qpnp-haptics"; |
| reg = <0xc000 0x100>; |
| interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>, |
| <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "hap-sc-irq", "hap-play-irq"; |
| qcom,pmic-revid = <&pmi8937_revid>; |
| vcc_pon-supply = <&pon_perph_reg>; |
| qcom,play-mode = "direct"; |
| qcom,wave-play-rate-us = <5263>; |
| qcom,actuator-type = <0>; |
| qcom,wave-shape = "square"; |
| qcom,vmax-mv = <2000>; |
| qcom,ilim-ma = <800>; |
| qcom,sc-deb-cycles = <8>; |
| qcom,int-pwm-freq-khz = <505>; |
| qcom,en-brake; |
| qcom,brake-pattern = <0x3 0x3 0x0 0x0>; |
| qcom,wave-samples = <0x3e 0x3e 0x3e 0x3e 0x3e |
| 0x3e 0x3e 0x3e>; |
| qcom,wave-rep-cnt = <1>; |
| qcom,wave-samp-rep-cnt = <1>; |
| }; |
| }; |
| }; |