blob: c04017a2cb3aebc23effc006f1923d03376be205 [file] [log] [blame]
/*
* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
&rpm_bus {
/* PM8953 regulators */
rpm-regulator-smpa1 {
status = "okay";
pm8953_s1: regulator-s1 {
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,use-voltage-level;
status = "okay";
};
};
/* PM8953 S2 - VDD_CX supply */
rpm-regulator-smpa2 {
status = "okay";
pm8953_s2_level: regulator-s2-level {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_s2_level";
qcom,set = <3>;
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,use-voltage-level;
};
pm8953_s2_floor_level: regulator-s2-floor-level {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_s2_floor_level";
qcom,set = <3>;
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,use-voltage-floor-level;
qcom,always-send-voltage;
};
pm8953_s2_level_ao: regulator-s2-level-ao {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_s2_level_ao";
qcom,set = <1>;
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,use-voltage-level;
};
pm8953_cx_cdev: regulator-cx-cdev {
compatible = "qcom,regulator-cooling-device";
regulator-cdev-supply = <&pm8953_s2_floor_level>;
regulator-levels = <RPM_SMD_REGULATOR_LEVEL_NOM_PLUS
RPM_SMD_REGULATOR_LEVEL_RETENTION>;
#cooling-cells = <2>;
};
};
rpm-regulator-smpa3 {
status = "okay";
pm8953_s3: regulator-s3 {
regulator-min-microvolt = <856000>;
regulator-max-microvolt = <1280000>;
qcom,init-voltage = <856000>;
status = "okay";
};
};
rpm-regulator-smpa4 {
status = "okay";
pm8953_s4: regulator-s4 {
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <2040000>;
qcom,init-voltage = <1900000>;
status = "okay";
};
};
/* VDD_MX supply */
rpm-regulator-smpa7 {
status = "okay";
pm8953_s7_level: regulator-s7-level {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_s7_level";
qcom,set = <3>;
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,init-voltage-level =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
qcom,use-voltage-level;
qcom,always-send-voltage;
};
pm8953_s7_level_ao: regulator-s7-level-ao {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_s7_level_ao";
qcom,set = <1>;
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,use-voltage-level;
qcom,always-send-voltage;
};
pm8953_s7_level_so: regulator-s7-level-so {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_s7_level_so";
qcom,set = <2>;
regulator-min-microvolt =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
regulator-max-microvolt =
<RPM_SMD_REGULATOR_LEVEL_BINNING>;
qcom,init-voltage-level =
<RPM_SMD_REGULATOR_LEVEL_RETENTION>;
qcom,use-voltage-level;
};
};
rpm-regulator-ldoa1 {
status = "okay";
pm8953_l1: regulator-l1 {
regulator-min-microvolt = <968000>;
regulator-max-microvolt = <1152000>;
qcom,init-voltage = <968000>;
status = "okay";
};
};
rpm-regulator-ldoa2 {
status = "okay";
pm8953_l2: regulator-l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
qcom,init-voltage = <1200000>;
status = "okay";
};
};
rpm-regulator-ldoa3 {
status = "okay";
pm8953_l3: regulator-l3 {
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1200000>;
qcom,init-voltage = <1140000>;
status = "okay";
};
};
rpm-regulator-ldoa4 {
compatible = "qcom,rpm-smd-regulator-resource";
qcom,resource-name = "ldoa";
qcom,resource-id = <4>;
qcom,regulator-type = <0>;
qcom,hpm-min-load = <10000>;
status = "okay";
pm8953_l4: regulator-l4 {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_l4";
qcom,set = <3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
rpm-regulator-ldoa5 {
status = "okay";
pm8953_l5: regulator-l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
rpm-regulator-ldoa6 {
status = "okay";
pm8953_l6: regulator-l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
rpm-regulator-ldoa7 {
status = "okay";
pm8953_l7: regulator-l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
pm8953_l7_ao: regulator-l7-ao {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_l7_ao";
qcom,set = <1>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
};
};
rpm-regulator-ldoa8 {
status = "okay";
pm8953_l8: regulator-l8 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
qcom,init-voltage = <2900000>;
status = "okay";
};
};
rpm-regulator-ldoa9 {
status = "okay";
pm8953_l9: regulator-l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
qcom,init-voltage = <3000000>;
status = "okay";
};
};
rpm-regulator-ldoa10 {
status = "okay";
pm8953_l10: regulator-l10 {
regulator-min-microvolt = <2948000>;
regulator-max-microvolt = <3300000>;
qcom,init-voltage = <2948000>;
status = "okay";
};
};
rpm-regulator-ldoa11 {
status = "okay";
pm8953_l11: regulator-l11 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
qcom,init-voltage = <2700000>;
status = "okay";
};
};
rpm-regulator-ldoa12 {
status = "okay";
pm8953_l12: regulator-l12 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3100000>;
qcom,init-voltage = <1648000>;
status = "okay";
};
};
rpm-regulator-ldoa13 {
status = "okay";
pm8953_l13: regulator-l13 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3100000>;
qcom,init-voltage = <3050000>;
status = "okay";
};
};
rpm-regulator-ldoa14 {
compatible = "qcom,rpm-smd-regulator-resource";
qcom,resource-name = "ldoa";
qcom,resource-id = <14>;
qcom,regulator-type = <0>;
qcom,hpm-min-load = <5000>;
status = "okay";
pm8953_l14: regulator-l14 {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_l14";
qcom,set = <3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3052000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
rpm-regulator-ldoa15 {
compatible = "qcom,rpm-smd-regulator-resource";
qcom,resource-name = "ldoa";
qcom,resource-id = <15>;
qcom,regulator-type = <0>;
qcom,hpm-min-load = <5000>;
status = "okay";
pm8953_l15: regulator-l15 {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_l15";
qcom,set = <3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3052000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
rpm-regulator-ldoa16 {
status = "okay";
pm8953_l16: regulator-l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
rpm-regulator-ldoa17 {
status = "okay";
pm8953_l17: regulator-l17 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2900000>;
qcom,init-voltage = <2800000>;
status = "okay";
};
};
rpm-regulator-ldoa19 {
status = "okay";
pm8953_l19: regulator-l19 {
regulator-min-microvolt = <1224000>;
regulator-max-microvolt = <1356000>;
qcom,init-voltage = <1224000>;
status = "okay";
};
};
rpm-regulator-ldoa22 {
status = "okay";
pm8953_l22: regulator-l22 {
regulator-min-microvolt = <2560000>;
regulator-max-microvolt = <2840000>;
qcom,init-voltage = <2560000>;
status = "okay";
};
};
rpm-regulator-ldoa23 {
status = "okay";
pm8953_l23: regulator-l23 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
qcom,init-voltage = <800000>;
status = "okay";
};
};
};
&spmi_bus {
qcom,pm8953@1 {
/* PM8953 S5 + S6 = VDD_APC_supply */
pm8953_s5: spm-regulator@2000 {
compatible = "qcom,spm-regulator";
reg = <0x2000 0x100>;
regulator-name = "pm8953_s5";
regulator-min-microvolt = <490000>;
regulator-max-microvolt = <980000>;
pm8953_s5_limit: avs-limit-regulator {
regulator-name = "pm8953_s5_avs_limit";
regulator-min-microvolt = <490000>;
regulator-max-microvolt = <980000>;
};
};
};
};
&soc {
apc_mem_acc_vreg: apc-mem-acc-regulator {
compatible = "qcom,mem-acc-regulator";
regulator-name = "apc_mem_acc_corner";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <2>;
qcom,acc-reg-addr-list = <0x01942138 0x01942130 0x01946004>;
qcom,acc-init-reg-config = <1 0xff>;
qcom,num-acc-corners = <2>;
qcom,boot-acc-corner = <1>;
qcom,corner1-reg-config =
/* 1 -> 1 */
<(-1) (-1)>, <(-1) (-1)>,
/* 1 -> 2 */
< 2 0xffff>, < 3 0xff>;
qcom,corner2-reg-config =
/* 2 -> 1 */
< 2 0x5555>, < 3 0x55>,
/* 2 -> 2 */
<(-1) (-1)>, <(-1) (-1)>;
};
apc_vreg_corner: regulator@b018000 {
compatible = "qcom,cpr-regulator";
reg = <0xb018000 0x1000>, <0xb011064 4>, <0xa4000 0x1000>;
reg-names = "rbcpr", "rbcpr_clk", "efuse_addr";
interrupts = <0 15 0>;
regulator-name = "apc_corner";
regulator-min-microvolt = <1>;
regulator-max-microvolt = <6>;
qcom,cpr-fuse-corners = <3>;
qcom,cpr-voltage-ceiling = <810000 845000 980000>;
qcom,cpr-voltage-floor = <700000 700000 790000>;
vdd-apc-supply = <&pm8953_s5>;
mem-acc-supply = <&apc_mem_acc_vreg>;
qcom,mem-acc-corner-map = <1 1 1 1 2 2>;
qcom,cpr-ref-clk = <19200>;
qcom,cpr-timer-delay = <5000>;
qcom,cpr-timer-cons-up = <0>;
qcom,cpr-timer-cons-down = <2>;
qcom,cpr-irq-line = <0>;
qcom,cpr-step-quotient = <10>;
qcom,cpr-up-threshold = <2>;
qcom,cpr-down-threshold = <4>;
qcom,cpr-idle-clocks = <15>;
qcom,cpr-gcnt-time = <1>;
qcom,vdd-apc-step-up-limit = <1>;
qcom,vdd-apc-step-down-limit = <1>;
qcom,cpr-apc-volt-step = <5000>;
qcom,cpr-fuse-row = <67 0>;
qcom,cpr-fuse-target-quot = <42 24 6>;
qcom,cpr-fuse-ro-sel = <60 57 54>;
qcom,cpr-init-voltage-ref = <760000 795000 910000>;
qcom,cpr-fuse-init-voltage =
<67 36 6 0>,
<67 18 6 0>,
<67 0 6 0>;
qcom,cpr-fuse-quot-offset =
<71 26 6 0>,
<71 20 6 0>,
<70 54 7 0>;
qcom,cpr-fuse-quot-offset-scale = <5 5 5>;
qcom,cpr-init-voltage-step = <10000>;
qcom,cpr-corner-map = <1 2 3 3 3 3>;
qcom,cpr-corner-frequency-map =
<1 1305600000>,
<2 1497600000>,
<3 1708800000>,
<4 1804800000>,
<5 1958400000>,
<6 2016000000>;
qcom,speed-bin-fuse-sel = <37 34 3 0>;
qcom,cpr-speed-bin-max-corners =
<0 (-1) 1 2 5>,
<1 (-1) 1 2 5>,
<4 (-1) 1 2 6>,
<5 (-1) 1 2 6>;
qcom,cpr-fuse-revision = <69 39 3 0>;
qcom,cpr-quot-adjust-scaling-factor-max = <0 1400 1400>;
qcom,cpr-voltage-scaling-factor-max = <0 2000 2000>;
qcom,cpr-scaled-init-voltage-as-ceiling;
qcom,cpr-fuse-version-map =
/* <Speed-bin pvs-version cpr-rev ... ... ...> */
<(-1) (-1) ( 0) (-1) (-1) (-1)>,
<(-1) (-1) ( 1) (-1) (-1) (-1)>,
<(-1) (-1) (-1) (-1) (-1) (-1)>;
qcom,cpr-quotient-adjustment =
<66 77 66>, /* SVSP/NOM/TUR:30/35/30 mV */
<(-74) 0 (-30)>, /* SVSP/NOM/TUR:-34/0/-14 mV */
<0 0 0>;
qcom,cpr-floor-to-ceiling-max-range =
<50000 50000 65000 65000 65000 65000>,
<50000 50000 65000 65000 65000 65000>,
<50000 50000 65000 65000 65000 65000>;
qcom,cpr-voltage-ceiling-override =
<(-1) (-1) 810000 845000 885000 980000 980000 980000>;
qcom,cpr-virtual-corner-quotient-adjustment =
<0 0 0 0 0 0>,
<0 0 (-22) 0 0 0>, /* NOMP: -10 mV */
<0 0 0 0 0 0>;
qcom,cpr-enable;
};
dbu1: dbu1 {
compatible = "regulator-fixed";
regulator-name = "dbu1";
startup-delay-us = <0>;
enable-active-high;
};
};