blob: a405e06b23c7d1307c921ff656a2968e29c7677c [file] [log] [blame]
/* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "sdm845-pmic-overlay.dtsi"
#include "sdm845-pinctrl-overlay.dtsi"
#include "sdm845-camera-sensor-qrd.dtsi"
#include <dt-bindings/gpio/gpio.h>
&qupv3_se10_i2c {
#include "smb1355.dtsi"
};
&vendor {
bluetooth: bt_wcn3990 {
compatible = "qca,wcn3990";
qca,bt-vdd-io-supply = <&pm8998_s3>;
qca,bt-vdd-xtal-supply = <&pm8998_s5>;
qca,bt-vdd-core-supply = <&pm8998_l7>;
qca,bt-vdd-pa-supply = <&pm8998_l17>;
qca,bt-vdd-ldo-supply = <&pm8998_l25>;
qca,bt-vdd-io-voltage-level = <1352000 1352000>;
qca,bt-vdd-xtal-voltage-level = <2040000 2040000>;
qca,bt-vdd-core-voltage-level = <1800000 1800000>;
qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;
qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */
};
qrd_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "fg-gen3-batterydata-gt3746a6-2900mah.dtsi"
};
};
&qupv3_se9_2uart {
status = "ok";
};
&qupv3_se8_spi {
status = "ok";
};
&soc {
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
vol_up {
label = "volume_up";
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <115>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
};
};
&qupv3_se3_i2c {
status = "ok";
nq@28 {
compatible = "qcom,nq-nci";
reg = <0x28>;
qcom,nq-irq = <&tlmm 63 0x00>;
qcom,nq-ven = <&tlmm 12 0x00>;
qcom,nq-firm = <&tlmm 62 0x00>;
qcom,nq-clkreq = <&pm8998_gpios 21 0x00>;
qcom,nq-esepwr = <&tlmm 116 0x00>;
interrupt-parent = <&tlmm>;
interrupts = <63 0>;
interrupt-names = "nfc_irq";
pinctrl-names = "nfc_active", "nfc_suspend";
pinctrl-0 = <&nfc_int_active
&nfc_enable_active
&nfc_clk_default>;
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
};
};
&qupv3_se10_i2c {
status = "ok";
};
&qupv3_se6_4uart {
status = "ok";
};
&pmi8998_fg {
qcom,battery-data = <&qrd_batterydata>;
qcom,fg-bmd-en-delay-ms = <300>;
};
&smb1355_charger_0 {
status = "ok";
};
&smb1355_charger_1 {
status = "ok";
};
&mdss_mdp {
#cooling-cells = <2>;
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v3";
vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
vdda-phy-max-microamp = <62900>;
vdda-pll-max-microamp = <18300>;
status = "ok";
};
&ufshc_mem {
vdd-hba-supply = <&ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&pm8998_l20>;
vcc-voltage-level = <2950000 2960000>;
vccq2-supply = <&pm8998_s4>;
vcc-max-microamp = <600000>;
vccq2-max-microamp = <600000>;
qcom,vddp-ref-clk-supply = <&pm8998_l2>;
qcom,vddp-ref-clk-max-microamp = <100>;
status = "ok";
};
&sdhc_2 {
vdd-supply = <&pm8998_l21>;
qcom,vdd-voltage-level = <2950000 2960000>;
qcom,vdd-current-level = <200 800000>;
vdd-io-supply = <&pm8998_l13>;
qcom,vdd-io-voltage-level = <1808000 2960000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &storage_cd>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
status = "ok";
};
&labibb {
status = "ok";
qcom,qpnp-labibb-mode = "lcd";
};
&pmi8998_wled {
status = "okay";
qcom,led-strings-list = [01 02];
};
&pmi8998_haptics {
qcom,vmax-mv = <1800>;
qcom,wave-play-rate-us = <4347>;
qcom,lra-auto-mode;
status = "okay";
};
&mdss_mdp {
connectors = <&sde_rscc &sde_wb &sde_dp>;
};
&dsi_nt35597_truly_dsc_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
qcom,panel-mode-gpio = <&tlmm 52 0>;
qcom,platform-te-gpio = <&tlmm 10 0>;
qcom,platform-reset-gpio = <&tlmm 6 0>;
qcom,mdss-dsi-panel-orientation = "180";
};
&dsi_nt35597_truly_dsc_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
qcom,panel-mode-gpio = <&tlmm 52 0>;
qcom,platform-te-gpio = <&tlmm 10 0>;
qcom,platform-reset-gpio = <&tlmm 6 0>;
qcom,mdss-dsi-panel-orientation = "180";
};
&dsi_nt35597_truly_dsc_cmd_display {
qcom,dsi-display-active;
};
&wil6210 {
status = "ok";
};
&ext_5v_boost {
status = "ok";
};
&pm8998_vadc {
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@85 {
label = "vcoin";
reg = <0x85>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4f {
label = "pa_therm1";
reg = <0x4f>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
};
&pm8998_adc_tm {
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,btm-channel-number = <0x60>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x68>;
qcom,thermal-node;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x70>;
qcom,thermal-node;
};
chan@4f {
label = "pa_therm1";
reg = <0x4f>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x78>;
qcom,thermal-node;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x80>;
qcom,thermal-node;
};
};
&thermal_zones {
xo-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4c>;
wake-capable-sensor;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
msm-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4d>;
wake-capable-sensor;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm1-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4f>;
wake-capable-sensor;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x51>;
wake-capable-sensor;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};