diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5e497d1..09ad745 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -147,10 +147,14 @@
 			default: 0
 
 	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode, s3_beep }
+			Format: { s3_bios, s3_mode, s3_beep, old_ordering }
 			See Documentation/power/video.txt for s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
 			as soon as the kernel's real-mode entry point is called.
+			old_ordering causes the ACPI 1.0 ordering of the _PTS
+			control method, wrt putting devices into low power
+			states, to be enforced (the ACPI 2.0 ordering of _PTS is
+			used by default).
 
 	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
 			Format: { level | edge | high | low }
@@ -1537,6 +1541,9 @@
 				Use with caution as certain devices share
 				address decoders between ROMs and other
 				resources.
+		norom		[X86-32,X86_64] Do not assign address space to
+				expansion ROMs that do not already have
+				BIOS assigned address ranges.
 		irqmask=0xMMMM	[X86-32] Set a bit mask of IRQs allowed to be
 				assigned automatically to PCI devices. You can
 				make the kernel exclude IRQs of your ISA cards
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b9212f..93fd6b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -248,7 +248,7 @@
 ACPI PCI HOTPLUG DRIVER
 P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
-L:	pcihpd-discuss@lists.sourceforge.net
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 ACPI THERMAL DRIVER
@@ -1145,21 +1145,21 @@
 P:	Scott Murray
 M:	scottm@somanetworks.com
 M:	scott@spiteful.org
-L:	pcihpd-discuss@lists.sourceforge.net
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
 P:	Scott Murray
 M:	scottm@somanetworks.com
 M:	scott@spiteful.org
-L:	pcihpd-discuss@lists.sourceforge.net
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 COMPACTPCI HOTPLUG GENERIC DRIVER
 P:	Scott Murray
 M:	scottm@somanetworks.com
 M:	scott@spiteful.org
-L:	pcihpd-discuss@lists.sourceforge.net
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 COMPAL LAPTOP SUPPORT
@@ -3219,7 +3219,7 @@
 PCIE HOTPLUG DRIVER
 P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
-L:	pcihpd-discuss@lists.sourceforge.net
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 PCMCIA SUBSYSTEM
@@ -3865,7 +3865,7 @@
 SHPC HOTPLUG DRIVER
 P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
-L:	pcihpd-discuss@lists.sourceforge.net
+L:	linux-pci@vger.kernel.org
 S:	Supported
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 4f165c9..edae117 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -19,36 +19,6 @@
 
 #include "pci-frv.h"
 
-#if 0
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-#endif
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
index 6ee00ef..0a68b5a 100644
--- a/arch/m68knommu/kernel/comempci.c
+++ b/arch/m68knommu/kernel/comempci.c
@@ -375,15 +375,6 @@
 
 /*****************************************************************************/
 
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource)
-{
-	printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n",
-		__FILE__, __LINE__);
-}
-
-
-/*****************************************************************************/
-
 /*
  *	Local routines to interrcept the standard I/O and vector handling
  *	code. Don't include this 'till now - initialization code above needs
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 6380662..678388f 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,42 +345,6 @@
         return pcibios_enable_resources(dev);
 }
 
-
-
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-                             struct resource *res, int resource)
-{
-        u32 new, check;
-        int reg;
-
-        return;
-
-        new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-        if (resource < 6) {
-                reg = PCI_BASE_ADDRESS_0 + 4 * resource;
-        } else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-                reg = dev->rom_base_reg;
-        } else {
-                /*
-                 * Somebody might have asked allocation of a non-standard
-                 * resource
-                 */
-                return;
-        }
-
-        pci_write_config_dword(dev, reg, new);
-        pci_read_config_dword(dev, reg, &check);
-        if ((new ^ check) &
-            ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :
-             PCI_BASE_ADDRESS_MEM_MASK)) {
-                printk(KERN_ERR "PCI: Error while updating region "
-                       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-                       new, check);
-        }
-}
-
-
 void pcibios_align_resource(void *data, struct resource *res,
                             resource_size_t size, resource_size_t align)
 {
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 08d2e73..f57095a 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -76,38 +76,6 @@
 	pci_read_bridge_bases(bus);
 }
 
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/*
-		 * Somebody might have asked allocation of a non-standard
-		 * resource
-		 */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
-		PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-
 void pcibios_align_resource(void *data, struct resource *res,
 			    resource_size_t size, resource_size_t align)
 			    __attribute__ ((weak));
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 112b09f..d00a365 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@
 	dev->class = class >> 8;
 	dev->revision = class & 0xff;
 
-	sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 	if (ofpci_verbose)
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 793ad20..868de3d 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -158,6 +158,8 @@
 			acpi_realmode_flags |= 2;
 		if (strncmp(str, "s3_beep", 7) == 0)
 			acpi_realmode_flags |= 4;
+		if (strncmp(str, "old_ordering", 12) == 0)
+			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 75cb5da..bf9b441 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1213,9 +1213,9 @@
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
-	device_resume();
+	device_resume(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1240,7 +1240,7 @@
 		apm_error("standby", err);
 
 	local_irq_disable();
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
 }
 
@@ -1326,7 +1326,7 @@
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume();
+				device_resume(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a4665f3..a0e11c0 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -120,7 +120,18 @@
 	{}
 };
 
-static void __init check_dev_quirk(int num, int slot, int func)
+/**
+ * check_dev_quirk - apply early quirks to a given PCI device
+ * @num: bus number
+ * @slot: slot number
+ * @func: PCI function
+ *
+ * Check the vendor & device ID against the early quirks table.
+ *
+ * If the device is single function, let early_quirks() know so we don't
+ * poke at this device again.
+ */
+static int __init check_dev_quirk(int num, int slot, int func)
 {
 	u16 class;
 	u16 vendor;
@@ -131,7 +142,7 @@
 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
 
 	if (class == 0xffff)
-		return;
+		return -1; /* no class, treat as single function */
 
 	vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
 
@@ -154,7 +165,9 @@
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
 	if (!(type & 0x80))
-		return;
+		return -1;
+
+	return 0;
 }
 
 void __init early_quirks(void)
@@ -167,6 +180,9 @@
 	/* Poor man's PCI discovery */
 	for (num = 0; num < 32; num++)
 		for (slot = 0; slot < 32; slot++)
-			for (func = 0; func < 8; func++)
-				check_dev_quirk(num, slot, func);
+			for (func = 0; func < 8; func++) {
+				/* Only probe function 0 on single fn devices */
+				if (check_dev_quirk(num, slot, func))
+					break;
+			}
 }
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 36c540d..531b55b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -684,6 +684,11 @@
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 	}
 
+#ifdef CONFIG_PCI
+	if (pci_early_dump_regs)
+		early_dump_pci_devices();
+#endif
+
 	finish_e820_parsing();
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 20b9f59..b67732b 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -20,6 +20,7 @@
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 
+unsigned int pci_early_dump_regs;
 static int pci_bf_sort;
 int pci_routeirq;
 int pcibios_last_bus = -1;
@@ -31,7 +32,7 @@
 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
@@ -41,7 +42,7 @@
 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
@@ -121,6 +122,21 @@
 	dmi_check_system(can_skip_pciprobe_dmi_table);
 }
 
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+
+	if (pci_probe & PCI_NOASSIGN_ROMS) {
+		if (rom_r->parent)
+			return;
+		if (rom_r->start) {
+			/* we deal with BIOS assigned ROM later */
+			return;
+		}
+		rom_r->start = rom_r->end = rom_r->flags = 0;
+	}
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -128,7 +144,11 @@
 
 void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 {
+	struct pci_dev *dev;
+
 	pci_read_bridge_bases(b);
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
 }
 
 /*
@@ -481,12 +501,18 @@
 	else if (!strcmp(str, "rom")) {
 		pci_probe |= PCI_ASSIGN_ROMS;
 		return NULL;
+	} else if (!strcmp(str, "norom")) {
+		pci_probe |= PCI_NOASSIGN_ROMS;
+		return NULL;
 	} else if (!strcmp(str, "assign-busses")) {
 		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 		return NULL;
 	} else if (!strcmp(str, "use_crs")) {
 		pci_probe |= PCI_USE__CRS;
 		return NULL;
+	} else if (!strcmp(str, "earlydump")) {
+		pci_early_dump_regs = 1;
+		return NULL;
 	} else if (!strcmp(str, "routeirq")) {
 		pci_routeirq = 1;
 		return NULL;
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 42df4b6..858dbe3 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -49,7 +49,14 @@
 {
 	PDprintk("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
-	outb(val, 0xcfc);
+	outb(val, 0xcfc + (offset&3));
+}
+
+void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
+{
+	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	outw(val, 0xcfc + (offset&2));
 }
 
 int early_pci_allowed(void)
@@ -57,3 +64,54 @@
 	return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
 			PCI_PROBE_CONF1;
 }
+
+void early_dump_pci_device(u8 bus, u8 slot, u8 func)
+{
+	int i;
+	int j;
+	u32 val;
+
+	printk("PCI: %02x:%02x:%02x", bus, slot, func);
+
+	for (i = 0; i < 256; i += 4) {
+		if (!(i & 0x0f))
+			printk("\n%04x:",i);
+
+		val = read_pci_config(bus, slot, func, i);
+		for (j = 0; j < 4; j++) {
+			printk(" %02x", val & 0xff);
+			val >>= 8;
+		}
+	}
+	printk("\n");
+}
+
+void early_dump_pci_devices(void)
+{
+	unsigned bus, slot, func;
+
+	if (!early_pci_allowed())
+		return;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				u32 class;
+				u8 type;
+				class = read_pci_config(bus, slot, func,
+							PCI_CLASS_REVISION);
+				if (class == 0xffffffff)
+					break;
+
+				early_dump_pci_device(bus, slot, func);
+
+				/* No multi-function device? */
+				type = read_pci_config_byte(bus, slot, func,
+							       PCI_HEADER_TYPE);
+				if (!(type & 0x80))
+					break;
+			}
+		}
+	}
+}
+
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index dc568c6..6a06a2e 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -45,7 +45,8 @@
 	char *name;
 	u16 vendor, device;
 	int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
-	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+		int new);
 };
 
 struct irq_router_handler {
@@ -77,7 +78,8 @@
 	for (i = 0; i < rt->size; i++)
 		sum += addr[i];
 	if (!sum) {
-		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
+			rt);
 		return rt;
 	}
 	return NULL;
@@ -183,7 +185,8 @@
 	return (nr & 1) ? (x >> 4) : (x & 0xf);
 }
 
-static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+static void write_config_nybble(struct pci_dev *router, unsigned offset,
+	unsigned nr, unsigned int val)
 {
 	u8 x;
 	unsigned reg = offset + (nr >> 1);
@@ -467,7 +470,8 @@
 	return inb(0xc01) & 0xf;
 }
 
-static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
+	int pirq, int irq)
 {
 	outb(pirq, 0xc00);
 	outb(irq, 0xc01);
@@ -660,7 +664,8 @@
 }
 
 
-static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int serverworks_router_probe(struct irq_router *r,
+		struct pci_dev *router, u16 device)
 {
 	switch (device) {
 	case PCI_DEVICE_ID_SERVERWORKS_OSB4:
@@ -827,10 +832,12 @@
 
 	for (h = pirq_routers; h->vendor; h++) {
 		/* First look for a router match */
-		if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+		if (rt->rtr_vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, rt->rtr_device))
 			break;
 		/* Fall back to a device match */
-		if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+		if (pirq_router_dev->vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
 	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
@@ -845,11 +852,13 @@
 static struct irq_info *pirq_get_info(struct pci_dev *dev)
 {
 	struct irq_routing_table *rt = pirq_table;
-	int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	int entries = (rt->size - sizeof(struct irq_routing_table)) /
+		sizeof(struct irq_info);
 	struct irq_info *info;
 
 	for (info = rt->slots; entries--; info++)
-		if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+		if (info->bus == dev->bus->number &&
+			PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
 			return info;
 	return NULL;
 }
@@ -890,7 +899,8 @@
 		DBG(" -> not routed\n" KERN_DEBUG);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
+		pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -903,7 +913,8 @@
 	}
 
 	/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
-	if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+	if (acer_tm360_irqrouting && dev->irq == 11 &&
+		dev->vendor == PCI_VENDOR_ID_O2) {
 		pirq = 0x68;
 		mask = 0x400;
 		dev->irq = r->get(pirq_router_dev, dev, pirq);
@@ -920,15 +931,16 @@
 			newirq = 0;
 		else
 			printk("\n" KERN_WARNING
-			"PCI: IRQ %i for device %s doesn't match PIRQ mask "
-			"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
-			pci_name(dev));
+				"PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
+				KERN_DEBUG, newirq,
+				pci_name(dev));
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
 			if (!(mask & (1 << i)))
 				continue;
-			if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
+			if (pirq_penalty[i] < pirq_penalty[newirq] &&
+				can_request_irq(i, IRQF_SHARED))
 				newirq = i;
 		}
 	}
@@ -944,7 +956,8 @@
 		DBG(" -> got IRQ %d\n", irq);
 		msg = "Found";
 		eisa_set_level_irq(irq);
-	} else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+	} else if (newirq && r->set &&
+		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
 		DBG(" -> assigning IRQ %d", newirq);
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
@@ -962,7 +975,8 @@
 		} else
 			return 0;
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
+		pci_name(dev));
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -974,7 +988,10 @@
 		if (!info)
 			continue;
 		if (info->irq[pin].link == pirq) {
-			/* We refuse to override the dev->irq information. Give a warning! */
+			/*
+			 * We refuse to override the dev->irq
+			 * information. Give a warning!
+			 */
 			if (dev2->irq && dev2->irq != irq && \
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
 			((1 << dev2->irq) & mask))) {
@@ -987,7 +1004,9 @@
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+				printk(KERN_INFO
+					"PCI: Sharing IRQ %d with %s\n",
+					irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1001,15 +1020,21 @@
 	DBG(KERN_DEBUG "PCI: IRQ fixup\n");
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		/*
-		 * If the BIOS has set an out of range IRQ number, just ignore it.
-		 * Also keep track of which IRQ's are already in use.
+		 * If the BIOS has set an out of range IRQ number, just
+		 * ignore it.  Also keep track of which IRQ's are
+		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
+				pci_name(dev), dev->irq);
 			dev->irq = 0;
 		}
-		/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
-		if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+		/*
+		 * If the IRQ is already assigned to a PCI device,
+		 * ignore its ISA use penalty
+		 */
+		if (pirq_penalty[dev->irq] >= 100 &&
+				pirq_penalty[dev->irq] < 100000)
 			pirq_penalty[dev->irq] = 0;
 		pirq_penalty[dev->irq]++;
 	}
@@ -1025,8 +1050,13 @@
 			int irq;
 
 			if (pin) {
-				pin--;		/* interrupt pins are numbered starting from 1 */
-				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+				/*
+				 * interrupt pins are numbered starting
+				 * from 1
+				 */
+				pin--;
+				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+					PCI_SLOT(dev->devfn), pin);
 	/*
 	 * Busses behind bridges are typically not listed in the MP-table.
 	 * In this case we have to look up the IRQ based on the parent bus,
@@ -1067,7 +1097,8 @@
 {
 	if (!broken_hp_bios_irq9) {
 		broken_hp_bios_irq9 = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1080,7 +1111,8 @@
 {
 	if (!acer_tm360_irqrouting) {
 		acer_tm360_irqrouting = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1092,7 +1124,8 @@
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+			DMI_MATCH(DMI_PRODUCT_VERSION,
+				"HP Pavilion Notebook Model GE"),
 			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
 		},
 	},
@@ -1131,7 +1164,10 @@
 				if (!(pirq_table->exclusive_irqs & (1 << i)))
 					pirq_penalty[i] += 100;
 		}
-		/* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+		/*
+		 * If we're using the I/O APIC, avoid using the PCI IRQ
+		 * routing table
+		 */
 		if (io_apic_assign_pci_irqs)
 			pirq_table = NULL;
 	}
@@ -1175,7 +1211,7 @@
 	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
 		char *msg = "";
 
-		pin--;		/* interrupt pins are numbered starting from 1 */
+		pin--; /* interrupt pins are numbered starting from 1 */
 
 		if (io_apic_assign_pci_irqs) {
 			int irq;
@@ -1195,13 +1231,16 @@
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge), 'A' + pin, irq);
+					printk(KERN_WARNING
+						"PCI: using PPB %s[%c] to get irq %d\n",
+						pci_name(bridge),
+						'A' + pin, irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
+				printk(KERN_INFO
+					"PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
 					pci_name(dev), 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
@@ -1212,12 +1251,17 @@
 		else
 			msg = " Please try using pci=biosirq.";
 
-		/* With IDE legacy devices the IRQ lookup failure is not a problem.. */
-		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+		/*
+		 * With IDE legacy devices the IRQ lookup failure is not
+		 * a problem..
+		 */
+		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-		       'A' + pin, pci_name(dev), msg);
+		printk(KERN_WARNING
+			"PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
+			'A' + pin, pci_name(dev), msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index b2270a5..3e25deb 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -28,6 +28,7 @@
 #define PCI_USE__CRS		0x10000
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
 #define PCI_HAS_IO_ECS		0x40000
+#define PCI_NOASSIGN_ROMS	0x80000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index bba8673..735f5ea 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -336,6 +336,15 @@
 	  the battery and thermal drivers.  If you are compiling for a 
 	  mobile system, say Y.
 
+config ACPI_PCI_SLOT
+	tristate "PCI slot detection driver"
+	default n
+	help
+	  This driver will attempt to discover all PCI slots in your system,
+	  and creates entries in /sys/bus/pci/slots/. This feature can
+	  help you correlate PCI bus addresses with the physical geography
+	  of your slots. If you are unsure, say N.
+
 config ACPI_POWER
 	bool
 	default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 4efbe598..52a4cd4 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -48,6 +48,7 @@
 obj-$(CONFIG_ACPI_BAY)		+= bay.o
 obj-$(CONFIG_ACPI_VIDEO)	+= video.o
 obj-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
+obj-$(CONFIG_ACPI_PCI_SLOT)	+= pci_slot.o
 obj-$(CONFIG_ACPI_POWER)	+= power.o
 obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
 obj-$(CONFIG_ACPI_CONTAINER)	+= container.o
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index afb3438..ccae305 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -295,6 +295,28 @@
 
 EXPORT_SYMBOL(acpi_bus_set_power);
 
+bool acpi_bus_power_manageable(acpi_handle handle)
+{
+	struct acpi_device *device;
+	int result;
+
+	result = acpi_bus_get_device(handle, &device);
+	return result ? false : device->flags.power_manageable;
+}
+
+EXPORT_SYMBOL(acpi_bus_power_manageable);
+
+bool acpi_bus_can_wakeup(acpi_handle handle)
+{
+	struct acpi_device *device;
+	int result;
+
+	result = acpi_bus_get_device(handle, &device);
+	return result ? false : device->wakeup.flags.valid;
+}
+
+EXPORT_SYMBOL(acpi_bus_can_wakeup);
+
 /* --------------------------------------------------------------------------
                                 Event Management
    -------------------------------------------------------------------------- */
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 6d18ca3..0f2dd81 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -166,6 +166,8 @@
 				"firmware_node");
 		ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
 				"physical_node");
+		if (acpi_dev->wakeup.flags.valid)
+			device_set_wakeup_capable(dev, true);
 	}
 
 	return 0;
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
new file mode 100644
index 0000000..b9ab030
--- /dev/null
+++ b/drivers/acpi/pci_slot.c
@@ -0,0 +1,368 @@
+/*
+ *  pci_slot.c - ACPI PCI Slot Driver
+ *
+ *  The code here is heavily leveraged from the acpiphp module.
+ *  Thanks to Matthew Wilcox <matthew@wil.cx> for much guidance.
+ *  Thanks to Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> for code
+ *  review and fixes.
+ *
+ *  Copyright (C) 2007 Alex Chiang <achiang@hp.com>
+ *  Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms and conditions of the GNU General Public License,
+ *  version 2, as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+static int debug;
+static int check_sta_before_sun;
+
+#define DRIVER_VERSION 	"0.1"
+#define DRIVER_AUTHOR	"Alex Chiang <achiang@hp.com>"
+#define DRIVER_DESC	"ACPI PCI Slot Detection Driver"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
+module_param(debug, bool, 0644);
+
+#define _COMPONENT		ACPI_PCI_COMPONENT
+ACPI_MODULE_NAME("pci_slot");
+
+#define MY_NAME "pci_slot"
+#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
+#define dbg(format, arg...)					\
+	do {							\
+		if (debug)					\
+			printk(KERN_DEBUG "%s: " format,	\
+				MY_NAME , ## arg);		\
+	} while (0)
+
+#define SLOT_NAME_SIZE 20		/* Inspired by #define in acpiphp.h */
+
+struct acpi_pci_slot {
+	acpi_handle root_handle;	/* handle of the root bridge */
+	struct pci_slot *pci_slot;	/* corresponding pci_slot */
+	struct list_head list;		/* node in the list of slots */
+};
+
+static int acpi_pci_slot_add(acpi_handle handle);
+static void acpi_pci_slot_remove(acpi_handle handle);
+
+static LIST_HEAD(slot_list);
+static DEFINE_MUTEX(slot_list_lock);
+static struct acpi_pci_driver acpi_pci_slot_driver = {
+	.add = acpi_pci_slot_add,
+	.remove = acpi_pci_slot_remove,
+};
+
+static int
+check_slot(acpi_handle handle, int *device, unsigned long *sun)
+{
+	int retval = 0;
+	unsigned long adr, sta;
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+	dbg("Checking slot on path: %s\n", (char *)buffer.pointer);
+
+	if (check_sta_before_sun) {
+		/* If SxFy doesn't have _STA, we just assume it's there */
+		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+		if (ACPI_SUCCESS(status) && !(sta & ACPI_STA_DEVICE_PRESENT)) {
+			retval = -1;
+			goto out;
+		}
+	}
+
+	status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+	if (ACPI_FAILURE(status)) {
+		dbg("_ADR returned %d on %s\n", status, (char *)buffer.pointer);
+		retval = -1;
+		goto out;
+	}
+
+	*device = (adr >> 16) & 0xffff;
+
+	/* No _SUN == not a slot == bail */
+	status = acpi_evaluate_integer(handle, "_SUN", NULL, sun);
+	if (ACPI_FAILURE(status)) {
+		dbg("_SUN returned %d on %s\n", status, (char *)buffer.pointer);
+		retval = -1;
+		goto out;
+	}
+
+out:
+	kfree(buffer.pointer);
+	return retval;
+}
+
+struct callback_args {
+	acpi_walk_callback	user_function;	/* only for walk_p2p_bridge */
+	struct pci_bus		*pci_bus;
+	acpi_handle		root_handle;
+};
+
+/*
+ * register_slot
+ *
+ * Called once for each SxFy object in the namespace. Don't worry about
+ * calling pci_create_slot multiple times for the same pci_bus:device,
+ * since each subsequent call simply bumps the refcount on the pci_slot.
+ *
+ * The number of calls to pci_destroy_slot from unregister_slot is
+ * symmetrical.
+ */
+static acpi_status
+register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	int device;
+	unsigned long sun;
+	char name[SLOT_NAME_SIZE];
+	struct acpi_pci_slot *slot;
+	struct pci_slot *pci_slot;
+	struct callback_args *parent_context = context;
+	struct pci_bus *pci_bus = parent_context->pci_bus;
+
+	if (check_slot(handle, &device, &sun))
+		return AE_OK;
+
+	slot = kmalloc(sizeof(*slot), GFP_KERNEL);
+	if (!slot) {
+		err("%s: cannot allocate memory\n", __func__);
+		return AE_OK;
+	}
+
+	snprintf(name, sizeof(name), "%u", (u32)sun);
+	pci_slot = pci_create_slot(pci_bus, device, name);
+	if (IS_ERR(pci_slot)) {
+		err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
+		kfree(slot);
+	}
+
+	slot->root_handle = parent_context->root_handle;
+	slot->pci_slot = pci_slot;
+	INIT_LIST_HEAD(&slot->list);
+	mutex_lock(&slot_list_lock);
+	list_add(&slot->list, &slot_list);
+	mutex_unlock(&slot_list_lock);
+
+	dbg("pci_slot: %p, pci_bus: %x, device: %d, name: %s\n",
+		pci_slot, pci_bus->number, device, name);
+
+	return AE_OK;
+}
+
+/*
+ * walk_p2p_bridge - discover and walk p2p bridges
+ * @handle: points to an acpi_pci_root
+ * @context: p2p_bridge_context pointer
+ *
+ * Note that when we call ourselves recursively, we pass a different
+ * value of pci_bus in the child_context.
+ */
+static acpi_status
+walk_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	int device, function;
+	unsigned long adr;
+	acpi_status status;
+	acpi_handle dummy_handle;
+	acpi_walk_callback user_function;
+
+	struct pci_dev *dev;
+	struct pci_bus *pci_bus;
+	struct callback_args child_context;
+	struct callback_args *parent_context = context;
+
+	pci_bus = parent_context->pci_bus;
+	user_function = parent_context->user_function;
+
+	status = acpi_get_handle(handle, "_ADR", &dummy_handle);
+	if (ACPI_FAILURE(status))
+		return AE_OK;
+
+	status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+	if (ACPI_FAILURE(status))
+		return AE_OK;
+
+	device = (adr >> 16) & 0xffff;
+	function = adr & 0xffff;
+
+	dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
+	if (!dev || !dev->subordinate)
+		goto out;
+
+	child_context.pci_bus = dev->subordinate;
+	child_context.user_function = user_function;
+	child_context.root_handle = parent_context->root_handle;
+
+	dbg("p2p bridge walk, pci_bus = %x\n", dev->subordinate->number);
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+				     user_function, &child_context, NULL);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+				     walk_p2p_bridge, &child_context, NULL);
+out:
+	pci_dev_put(dev);
+	return AE_OK;
+}
+
+/*
+ * walk_root_bridge - generic root bridge walker
+ * @handle: points to an acpi_pci_root
+ * @user_function: user callback for slot objects
+ *
+ * Call user_function for all objects underneath this root bridge.
+ * Walk p2p bridges underneath us and call user_function on those too.
+ */
+static int
+walk_root_bridge(acpi_handle handle, acpi_walk_callback user_function)
+{
+	int seg, bus;
+	unsigned long tmp;
+	acpi_status status;
+	acpi_handle dummy_handle;
+	struct pci_bus *pci_bus;
+	struct callback_args context;
+
+	/* If the bridge doesn't have _STA, we assume it is always there */
+	status = acpi_get_handle(handle, "_STA", &dummy_handle);
+	if (ACPI_SUCCESS(status)) {
+		status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp);
+		if (ACPI_FAILURE(status)) {
+			info("%s: _STA evaluation failure\n", __func__);
+			return 0;
+		}
+		if ((tmp & ACPI_STA_DEVICE_FUNCTIONING) == 0)
+			/* don't register this object */
+			return 0;
+	}
+
+	status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp);
+	seg = ACPI_SUCCESS(status) ? tmp : 0;
+
+	status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp);
+	bus = ACPI_SUCCESS(status) ? tmp : 0;
+
+	pci_bus = pci_find_bus(seg, bus);
+	if (!pci_bus)
+		return 0;
+
+	context.pci_bus = pci_bus;
+	context.user_function = user_function;
+	context.root_handle = handle;
+
+	dbg("root bridge walk, pci_bus = %x\n", pci_bus->number);
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+				     user_function, &context, NULL);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+				     walk_p2p_bridge, &context, NULL);
+	if (ACPI_FAILURE(status))
+		err("%s: walk_p2p_bridge failure - %d\n", __func__, status);
+
+	return status;
+}
+
+/*
+ * acpi_pci_slot_add
+ * @handle: points to an acpi_pci_root
+ */
+static int
+acpi_pci_slot_add(acpi_handle handle)
+{
+	acpi_status status;
+
+	status = walk_root_bridge(handle, register_slot);
+	if (ACPI_FAILURE(status))
+		err("%s: register_slot failure - %d\n", __func__, status);
+
+	return status;
+}
+
+/*
+ * acpi_pci_slot_remove
+ * @handle: points to an acpi_pci_root
+ */
+static void
+acpi_pci_slot_remove(acpi_handle handle)
+{
+	struct acpi_pci_slot *slot, *tmp;
+
+	mutex_lock(&slot_list_lock);
+	list_for_each_entry_safe(slot, tmp, &slot_list, list) {
+		if (slot->root_handle == handle) {
+			list_del(&slot->list);
+			pci_destroy_slot(slot->pci_slot);
+			kfree(slot);
+		}
+	}
+	mutex_unlock(&slot_list_lock);
+}
+
+static int do_sta_before_sun(const struct dmi_system_id *d)
+{
+	info("%s detected: will evaluate _STA before calling _SUN\n", d->ident);
+	check_sta_before_sun = 1;
+	return 0;
+}
+
+static struct dmi_system_id acpi_pci_slot_dmi_table[] __initdata = {
+	/*
+	 * Fujitsu Primequest machines will return 1023 to indicate an
+	 * error if the _SUN method is evaluated on SxFy objects that
+	 * are not present (as indicated by _STA), so for those machines,
+	 * we want to check _STA before evaluating _SUN.
+	 */
+	{
+	 .callback = do_sta_before_sun,
+	 .ident = "Fujitsu PRIMEQUEST",
+	 .matches = {
+		DMI_MATCH(DMI_BIOS_VENDOR, "FUJITSU LIMITED"),
+		DMI_MATCH(DMI_BIOS_VERSION, "PRIMEQUEST"),
+		},
+	},
+	{}
+};
+
+static int __init
+acpi_pci_slot_init(void)
+{
+	dmi_check_system(acpi_pci_slot_dmi_table);
+	acpi_pci_register_driver(&acpi_pci_slot_driver);
+	return 0;
+}
+
+static void __exit
+acpi_pci_slot_exit(void)
+{
+	acpi_pci_unregister_driver(&acpi_pci_slot_driver);
+}
+
+module_init(acpi_pci_slot_init);
+module_exit(acpi_pci_slot_exit);
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 81e4f08..4ab21cb 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -292,69 +292,135 @@
 	return 0;
 }
 
+/**
+ * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in
+ *                          ACPI 3.0) _PSW (Power State Wake)
+ * @dev: Device to handle.
+ * @enable: 0 - disable, 1 - enable the wake capabilities of the device.
+ * @sleep_state: Target sleep state of the system.
+ * @dev_state: Target power state of the device.
+ *
+ * Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
+ * State Wake) for the device, if present.  On failure reset the device's
+ * wakeup.flags.valid flag.
+ *
+ * RETURN VALUE:
+ * 0 if either _DSW or _PSW has been successfully executed
+ * 0 if neither _DSW nor _PSW has been found
+ * -ENODEV if the execution of either _DSW or _PSW has failed
+ */
+int acpi_device_sleep_wake(struct acpi_device *dev,
+                           int enable, int sleep_state, int dev_state)
+{
+	union acpi_object in_arg[3];
+	struct acpi_object_list arg_list = { 3, in_arg };
+	acpi_status status = AE_OK;
+
+	/*
+	 * Try to execute _DSW first.
+	 *
+	 * Three agruments are needed for the _DSW object:
+	 * Argument 0: enable/disable the wake capabilities
+	 * Argument 1: target system state
+	 * Argument 2: target device state
+	 * When _DSW object is called to disable the wake capabilities, maybe
+	 * the first argument is filled. The values of the other two agruments
+	 * are meaningless.
+	 */
+	in_arg[0].type = ACPI_TYPE_INTEGER;
+	in_arg[0].integer.value = enable;
+	in_arg[1].type = ACPI_TYPE_INTEGER;
+	in_arg[1].integer.value = sleep_state;
+	in_arg[2].type = ACPI_TYPE_INTEGER;
+	in_arg[2].integer.value = dev_state;
+	status = acpi_evaluate_object(dev->handle, "_DSW", &arg_list, NULL);
+	if (ACPI_SUCCESS(status)) {
+		return 0;
+	} else if (status != AE_NOT_FOUND) {
+		printk(KERN_ERR PREFIX "_DSW execution failed\n");
+		dev->wakeup.flags.valid = 0;
+		return -ENODEV;
+	}
+
+	/* Execute _PSW */
+	arg_list.count = 1;
+	in_arg[0].integer.value = enable;
+	status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
+	if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
+		printk(KERN_ERR PREFIX "_PSW execution failed\n");
+		dev->wakeup.flags.valid = 0;
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 /*
  * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
  * 1. Power on the power resources required for the wakeup device 
- * 2. Enable _PSW (power state wake) for the device if present
+ * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
+ *    State Wake) for the device, if present
  */
-int acpi_enable_wakeup_device_power(struct acpi_device *dev)
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state)
 {
-	union acpi_object arg = { ACPI_TYPE_INTEGER };
-	struct acpi_object_list arg_list = { 1, &arg };
-	acpi_status status = AE_OK;
-	int i;
-	int ret = 0;
+	int i, err;
 
 	if (!dev || !dev->wakeup.flags.valid)
-		return -1;
+		return -EINVAL;
 
-	arg.integer.value = 1;
+	/*
+	 * Do not execute the code below twice in a row without calling
+	 * acpi_disable_wakeup_device_power() in between for the same device
+	 */
+	if (dev->wakeup.flags.prepared)
+		return 0;
+
 	/* Open power resource */
 	for (i = 0; i < dev->wakeup.resources.count; i++) {
-		ret = acpi_power_on(dev->wakeup.resources.handles[i], dev);
+		int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev);
 		if (ret) {
 			printk(KERN_ERR PREFIX "Transition power state\n");
 			dev->wakeup.flags.valid = 0;
-			return -1;
+			return -ENODEV;
 		}
 	}
 
-	/* Execute PSW */
-	status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
-	if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
-		printk(KERN_ERR PREFIX "Evaluate _PSW\n");
-		dev->wakeup.flags.valid = 0;
-		ret = -1;
-	}
+	/*
+	 * Passing 3 as the third argument below means the device may be placed
+	 * in arbitrary power state afterwards.
+	 */
+	err = acpi_device_sleep_wake(dev, 1, sleep_state, 3);
+	if (!err)
+		dev->wakeup.flags.prepared = 1;
 
-	return ret;
+	return err;
 }
 
 /*
  * Shutdown a wakeup device, counterpart of above method
- * 1. Disable _PSW (power state wake)
+ * 1. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
+ *    State Wake) for the device, if present
  * 2. Shutdown down the power resources
  */
 int acpi_disable_wakeup_device_power(struct acpi_device *dev)
 {
-	union acpi_object arg = { ACPI_TYPE_INTEGER };
-	struct acpi_object_list arg_list = { 1, &arg };
-	acpi_status status = AE_OK;
-	int i;
-	int ret = 0;
-
+	int i, ret;
 
 	if (!dev || !dev->wakeup.flags.valid)
-		return -1;
+		return -EINVAL;
 
-	arg.integer.value = 0;
-	/* Execute PSW */
-	status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL);
-	if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) {
-		printk(KERN_ERR PREFIX "Evaluate _PSW\n");
-		dev->wakeup.flags.valid = 0;
-		return -1;
-	}
+	/*
+	 * Do not execute the code below twice in a row without calling
+	 * acpi_enable_wakeup_device_power() in between for the same device
+	 */
+	if (!dev->wakeup.flags.prepared)
+		return 0;
+
+	dev->wakeup.flags.prepared = 0;
+
+	ret = acpi_device_sleep_wake(dev, 0, 0, 0);
+	if (ret)
+		return ret;
 
 	/* Close power resource */
 	for (i = 0; i < dev->wakeup.resources.count; i++) {
@@ -362,7 +428,7 @@
 		if (ret) {
 			printk(KERN_ERR PREFIX "Transition power state\n");
 			dev->wakeup.flags.valid = 0;
-			return -1;
+			return -ENODEV;
 		}
 	}
 
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5b049cd..f3132aa 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -703,9 +703,7 @@
 	acpi_status status = 0;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *package = NULL;
-	union acpi_object in_arg[3];
-	struct acpi_object_list arg_list = { 3, in_arg };
-	acpi_status psw_status = AE_OK;
+	int psw_error;
 
 	struct acpi_device_id button_device_ids[] = {
 		{"PNP0C0D", 0},
@@ -737,39 +735,11 @@
 	 * So it is necessary to call _DSW object first. Only when it is not
 	 * present will the _PSW object used.
 	 */
-	/*
-	 * Three agruments are needed for the _DSW object.
-	 * Argument 0: enable/disable the wake capabilities
-	 * When _DSW object is called to disable the wake capabilities, maybe
-	 * the first argument is filled. The value of the other two agruments
-	 * is meaningless.
-	 */
-	in_arg[0].type = ACPI_TYPE_INTEGER;
-	in_arg[0].integer.value = 0;
-	in_arg[1].type = ACPI_TYPE_INTEGER;
-	in_arg[1].integer.value = 0;
-	in_arg[2].type = ACPI_TYPE_INTEGER;
-	in_arg[2].integer.value = 0;
-	psw_status = acpi_evaluate_object(device->handle, "_DSW",
-						&arg_list, NULL);
-	if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND))
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in evaluate _DSW\n"));
-	/*
-	 * When the _DSW object is not present, OSPM will call _PSW object.
-	 */
-	if (psw_status == AE_NOT_FOUND) {
-		/*
-		 * Only one agruments is required for the _PSW object.
-		 * agrument 0: enable/disable the wake capabilities
-		 */
-		arg_list.count = 1;
-		in_arg[0].integer.value = 0;
-		psw_status = acpi_evaluate_object(device->handle, "_PSW",
-						&arg_list, NULL);
-		if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND))
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in "
-						"evaluate _PSW\n"));
-	}
+	psw_error = acpi_device_sleep_wake(device, 0, 0, 0);
+	if (psw_error)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				"error in _DSW or _PSW evaluation\n"));
+
 	/* Power button, Lid switch always enable wakeup */
 	if (!acpi_match_device_ids(device, button_device_ids))
 		device->wakeup.flags.run_wake = 1;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 244e352..0489a7d 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -24,10 +24,6 @@
 
 u8 sleep_states[ACPI_S_STATE_COUNT];
 
-#ifdef CONFIG_PM_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-#endif
-
 static int acpi_sleep_prepare(u32 acpi_state)
 {
 #ifdef CONFIG_ACPI_SLEEP
@@ -49,9 +45,96 @@
 	return 0;
 }
 
-#ifdef CONFIG_SUSPEND
-static struct platform_suspend_ops acpi_suspend_ops;
+#ifdef CONFIG_PM_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
+/*
+ * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
+ * user to request that behavior by using the 'acpi_old_suspend_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool old_suspend_ordering;
+
+void __init acpi_old_suspend_ordering(void)
+{
+	old_suspend_ordering = true;
+}
+
+/**
+ *	acpi_pm_disable_gpes - Disable the GPEs.
+ */
+static int acpi_pm_disable_gpes(void)
+{
+	acpi_hw_disable_all_gpes();
+	return 0;
+}
+
+/**
+ *	__acpi_pm_prepare - Prepare the platform to enter the target state.
+ *
+ *	If necessary, set the firmware waking vector and do arch-specific
+ *	nastiness to get the wakeup code to the waking vector.
+ */
+static int __acpi_pm_prepare(void)
+{
+	int error = acpi_sleep_prepare(acpi_target_sleep_state);
+
+	if (error)
+		acpi_target_sleep_state = ACPI_STATE_S0;
+	return error;
+}
+
+/**
+ *	acpi_pm_prepare - Prepare the platform to enter the target sleep
+ *		state and disable the GPEs.
+ */
+static int acpi_pm_prepare(void)
+{
+	int error = __acpi_pm_prepare();
+
+	if (!error)
+		acpi_hw_disable_all_gpes();
+	return error;
+}
+
+/**
+ *	acpi_pm_finish - Instruct the platform to leave a sleep state.
+ *
+ *	This is called after we wake back up (or if entering the sleep state
+ *	failed).
+ */
+static void acpi_pm_finish(void)
+{
+	u32 acpi_state = acpi_target_sleep_state;
+
+	if (acpi_state == ACPI_STATE_S0)
+		return;
+
+	printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
+		acpi_state);
+	acpi_disable_wakeup_device(acpi_state);
+	acpi_leave_sleep_state(acpi_state);
+
+	/* reset firmware waking vector */
+	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+
+	acpi_target_sleep_state = ACPI_STATE_S0;
+}
+
+/**
+ *	acpi_pm_end - Finish up suspend sequence.
+ */
+static void acpi_pm_end(void)
+{
+	/*
+	 * This is necessary in case acpi_pm_finish() is not called during a
+	 * failing transition to a sleep state.
+	 */
+	acpi_target_sleep_state = ACPI_STATE_S0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_SUSPEND
 extern void do_suspend_lowlevel(void);
 
 static u32 acpi_suspend_states[] = {
@@ -65,7 +148,6 @@
  *	acpi_suspend_begin - Set the target system sleep state to the state
  *		associated with given @pm_state, if supported.
  */
-
 static int acpi_suspend_begin(suspend_state_t pm_state)
 {
 	u32 acpi_state = acpi_suspend_states[pm_state];
@@ -82,25 +164,6 @@
 }
 
 /**
- *	acpi_suspend_prepare - Do preliminary suspend work.
- *
- *	If necessary, set the firmware waking vector and do arch-specific
- *	nastiness to get the wakeup code to the waking vector.
- */
-
-static int acpi_suspend_prepare(void)
-{
-	int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
-	if (error) {
-		acpi_target_sleep_state = ACPI_STATE_S0;
-		return error;
-	}
-
-	return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
-/**
  *	acpi_suspend_enter - Actually enter a sleep state.
  *	@pm_state: ignored
  *
@@ -108,7 +171,6 @@
  *	assembly, which in turn call acpi_enter_sleep_state().
  *	It's unfortunate, but it works. Please fix if you're feeling frisky.
  */
-
 static int acpi_suspend_enter(suspend_state_t pm_state)
 {
 	acpi_status status = AE_OK;
@@ -165,39 +227,6 @@
 	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 }
 
-/**
- *	acpi_suspend_finish - Instruct the platform to leave a sleep state.
- *
- *	This is called after we wake back up (or if entering the sleep state
- *	failed). 
- */
-
-static void acpi_suspend_finish(void)
-{
-	u32 acpi_state = acpi_target_sleep_state;
-
-	acpi_disable_wakeup_device(acpi_state);
-	acpi_leave_sleep_state(acpi_state);
-
-	/* reset firmware waking vector */
-	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
-	acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
-/**
- *	acpi_suspend_end - Finish up suspend sequence.
- */
-
-static void acpi_suspend_end(void)
-{
-	/*
-	 * This is necessary in case acpi_suspend_finish() is not called during a
-	 * failing transition to a sleep state.
-	 */
-	acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 {
 	u32 acpi_state;
@@ -217,10 +246,39 @@
 static struct platform_suspend_ops acpi_suspend_ops = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin,
-	.prepare = acpi_suspend_prepare,
+	.prepare = acpi_pm_prepare,
 	.enter = acpi_suspend_enter,
-	.finish = acpi_suspend_finish,
-	.end = acpi_suspend_end,
+	.finish = acpi_pm_finish,
+	.end = acpi_pm_end,
+};
+
+/**
+ *	acpi_suspend_begin_old - Set the target system sleep state to the
+ *		state associated with given @pm_state, if supported, and
+ *		execute the _PTS control method.  This function is used if the
+ *		pre-ACPI 2.0 suspend ordering has been requested.
+ */
+static int acpi_suspend_begin_old(suspend_state_t pm_state)
+{
+	int error = acpi_suspend_begin(pm_state);
+
+	if (!error)
+		error = __acpi_pm_prepare();
+	return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_suspend_ops acpi_suspend_ops_old = {
+	.valid = acpi_suspend_state_valid,
+	.begin = acpi_suspend_begin_old,
+	.prepare = acpi_pm_disable_gpes,
+	.enter = acpi_suspend_enter,
+	.finish = acpi_pm_finish,
+	.end = acpi_pm_end,
+	.recover = acpi_pm_finish,
 };
 #endif /* CONFIG_SUSPEND */
 
@@ -228,22 +286,9 @@
 static int acpi_hibernation_begin(void)
 {
 	acpi_target_sleep_state = ACPI_STATE_S4;
-
 	return 0;
 }
 
-static int acpi_hibernation_prepare(void)
-{
-	int error = acpi_sleep_prepare(ACPI_STATE_S4);
-
-	if (error) {
-		acpi_target_sleep_state = ACPI_STATE_S0;
-		return error;
-	}
-
-	return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
 static int acpi_hibernation_enter(void)
 {
 	acpi_status status = AE_OK;
@@ -273,52 +318,55 @@
 	acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 }
 
-static void acpi_hibernation_finish(void)
-{
-	acpi_disable_wakeup_device(ACPI_STATE_S4);
-	acpi_leave_sleep_state(ACPI_STATE_S4);
-
-	/* reset firmware waking vector */
-	acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
-	acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
-static void acpi_hibernation_end(void)
-{
-	/*
-	 * This is necessary in case acpi_hibernation_finish() is not called
-	 * during a failing transition to the sleep state.
-	 */
-	acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
-static int acpi_hibernation_pre_restore(void)
-{
-	acpi_status status;
-
-	status = acpi_hw_disable_all_gpes();
-
-	return ACPI_SUCCESS(status) ? 0 : -EFAULT;
-}
-
-static void acpi_hibernation_restore_cleanup(void)
+static void acpi_pm_enable_gpes(void)
 {
 	acpi_hw_enable_all_runtime_gpes();
 }
 
 static struct platform_hibernation_ops acpi_hibernation_ops = {
 	.begin = acpi_hibernation_begin,
-	.end = acpi_hibernation_end,
-	.pre_snapshot = acpi_hibernation_prepare,
-	.finish = acpi_hibernation_finish,
-	.prepare = acpi_hibernation_prepare,
+	.end = acpi_pm_end,
+	.pre_snapshot = acpi_pm_prepare,
+	.finish = acpi_pm_finish,
+	.prepare = acpi_pm_prepare,
 	.enter = acpi_hibernation_enter,
 	.leave = acpi_hibernation_leave,
-	.pre_restore = acpi_hibernation_pre_restore,
-	.restore_cleanup = acpi_hibernation_restore_cleanup,
+	.pre_restore = acpi_pm_disable_gpes,
+	.restore_cleanup = acpi_pm_enable_gpes,
 };
-#endif				/* CONFIG_HIBERNATION */
+
+/**
+ *	acpi_hibernation_begin_old - Set the target system sleep state to
+ *		ACPI_STATE_S4 and execute the _PTS control method.  This
+ *		function is used if the pre-ACPI 2.0 suspend ordering has been
+ *		requested.
+ */
+static int acpi_hibernation_begin_old(void)
+{
+	int error = acpi_sleep_prepare(ACPI_STATE_S4);
+
+	if (!error)
+		acpi_target_sleep_state = ACPI_STATE_S4;
+	return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+	.begin = acpi_hibernation_begin_old,
+	.end = acpi_pm_end,
+	.pre_snapshot = acpi_pm_disable_gpes,
+	.finish = acpi_pm_finish,
+	.prepare = acpi_pm_disable_gpes,
+	.enter = acpi_hibernation_enter,
+	.leave = acpi_hibernation_leave,
+	.pre_restore = acpi_pm_disable_gpes,
+	.restore_cleanup = acpi_pm_enable_gpes,
+	.recover = acpi_pm_finish,
+};
+#endif /* CONFIG_HIBERNATION */
 
 int acpi_suspend(u32 acpi_state)
 {
@@ -419,6 +467,31 @@
 		*d_min_p = d_min;
 	return d_max;
 }
+
+/**
+ *	acpi_pm_device_sleep_wake - enable or disable the system wake-up
+ *                                  capability of given device
+ *	@dev: device to handle
+ *	@enable: 'true' - enable, 'false' - disable the wake-up capability
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	acpi_handle handle;
+	struct acpi_device *adev;
+
+	if (!device_may_wakeup(dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		printk(KERN_DEBUG "ACPI handle has no context!\n");
+		return -ENODEV;
+	}
+
+	return enable ?
+		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+		acpi_disable_wakeup_device_power(adev);
+}
 #endif
 
 static void acpi_power_off_prepare(void)
@@ -460,13 +533,15 @@
 		}
 	}
 
-	suspend_set_ops(&acpi_suspend_ops);
+	suspend_set_ops(old_suspend_ordering ?
+		&acpi_suspend_ops_old : &acpi_suspend_ops);
 #endif
 
 #ifdef CONFIG_HIBERNATION
 	status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 	if (ACPI_SUCCESS(status)) {
-		hibernation_set_ops(&acpi_hibernation_ops);
+		hibernation_set_ops(old_suspend_ordering ?
+			&acpi_hibernation_ops_old : &acpi_hibernation_ops);
 		sleep_states[ACPI_STATE_S4] = 1;
 		printk(" S4");
 	}
diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
index ed8e41b..38655eb 100644
--- a/drivers/acpi/sleep/wakeup.c
+++ b/drivers/acpi/sleep/wakeup.c
@@ -42,7 +42,7 @@
 			continue;
 
 		spin_unlock(&acpi_device_lock);
-		acpi_enable_wakeup_device_power(dev);
+		acpi_enable_wakeup_device_power(dev, sleep_state);
 		spin_lock(&acpi_device_lock);
 	}
 	spin_unlock(&acpi_device_lock);
@@ -66,13 +66,15 @@
 	list_for_each_safe(node, next, &acpi_wakeup_device_list) {
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
+
 		if (!dev->wakeup.flags.valid)
 			continue;
+
 		/* If users want to disable run-wake GPE,
 		 * we only disable it for wake and leave it for runtime
 		 */
-		if (!dev->wakeup.state.enabled ||
-		    sleep_state > (u32) dev->wakeup.sleep_state) {
+		if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
+		    || sleep_state > (u32) dev->wakeup.sleep_state) {
 			if (dev->wakeup.flags.run_wake) {
 				spin_unlock(&acpi_device_lock);
 				/* set_gpe_type will disable GPE, leave it like that */
@@ -110,8 +112,9 @@
 
 		if (!dev->wakeup.flags.valid)
 			continue;
-		if (!dev->wakeup.state.enabled ||
-		    sleep_state > (u32) dev->wakeup.sleep_state) {
+
+		if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
+		    || sleep_state > (u32) dev->wakeup.sleep_state) {
 			if (dev->wakeup.flags.run_wake) {
 				spin_unlock(&acpi_device_lock);
 				acpi_set_gpe_type(dev->wakeup.gpe_device,
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 911ec60..3f94039 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -453,6 +453,8 @@
 		drv->driver.suspend = platform_drv_suspend;
 	if (drv->resume)
 		drv->driver.resume = platform_drv_resume;
+	if (drv->pm)
+		drv->driver.pm = &drv->pm->base;
 	return driver_register(&drv->driver);
 }
 EXPORT_SYMBOL_GPL(platform_driver_register);
@@ -560,7 +562,9 @@
 	return (strncmp(pdev->name, drv->name, BUS_ID_SIZE) == 0);
 }
 
-static int platform_suspend(struct device *dev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+
+static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
 	int ret = 0;
 
@@ -570,7 +574,7 @@
 	return ret;
 }
 
-static int platform_suspend_late(struct device *dev, pm_message_t mesg)
+static int platform_legacy_suspend_late(struct device *dev, pm_message_t mesg)
 {
 	struct platform_driver *drv = to_platform_driver(dev->driver);
 	struct platform_device *pdev;
@@ -583,7 +587,7 @@
 	return ret;
 }
 
-static int platform_resume_early(struct device *dev)
+static int platform_legacy_resume_early(struct device *dev)
 {
 	struct platform_driver *drv = to_platform_driver(dev->driver);
 	struct platform_device *pdev;
@@ -596,7 +600,7 @@
 	return ret;
 }
 
-static int platform_resume(struct device *dev)
+static int platform_legacy_resume(struct device *dev)
 {
 	int ret = 0;
 
@@ -606,15 +610,291 @@
 	return ret;
 }
 
+static int platform_pm_prepare(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm && drv->pm->prepare)
+		ret = drv->pm->prepare(dev);
+
+	return ret;
+}
+
+static void platform_pm_complete(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+
+	if (drv && drv->pm && drv->pm->complete)
+		drv->pm->complete(dev);
+}
+
+#ifdef CONFIG_SUSPEND
+
+static int platform_pm_suspend(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->suspend)
+			ret = drv->pm->suspend(dev);
+	} else {
+		ret = platform_legacy_suspend(dev, PMSG_SUSPEND);
+	}
+
+	return ret;
+}
+
+static int platform_pm_suspend_noirq(struct device *dev)
+{
+	struct platform_driver *pdrv;
+	int ret = 0;
+
+	if (!dev->driver)
+		return 0;
+
+	pdrv = to_platform_driver(dev->driver);
+	if (pdrv->pm) {
+		if (pdrv->pm->suspend_noirq)
+			ret = pdrv->pm->suspend_noirq(dev);
+	} else {
+		ret = platform_legacy_suspend_late(dev, PMSG_SUSPEND);
+	}
+
+	return ret;
+}
+
+static int platform_pm_resume(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->resume)
+			ret = drv->pm->resume(dev);
+	} else {
+		ret = platform_legacy_resume(dev);
+	}
+
+	return ret;
+}
+
+static int platform_pm_resume_noirq(struct device *dev)
+{
+	struct platform_driver *pdrv;
+	int ret = 0;
+
+	if (!dev->driver)
+		return 0;
+
+	pdrv = to_platform_driver(dev->driver);
+	if (pdrv->pm) {
+		if (pdrv->pm->resume_noirq)
+			ret = pdrv->pm->resume_noirq(dev);
+	} else {
+		ret = platform_legacy_resume_early(dev);
+	}
+
+	return ret;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define platform_pm_suspend		NULL
+#define platform_pm_resume		NULL
+#define platform_pm_suspend_noirq	NULL
+#define platform_pm_resume_noirq	NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int platform_pm_freeze(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (!drv)
+		return 0;
+
+	if (drv->pm) {
+		if (drv->pm->freeze)
+			ret = drv->pm->freeze(dev);
+	} else {
+		ret = platform_legacy_suspend(dev, PMSG_FREEZE);
+	}
+
+	return ret;
+}
+
+static int platform_pm_freeze_noirq(struct device *dev)
+{
+	struct platform_driver *pdrv;
+	int ret = 0;
+
+	if (!dev->driver)
+		return 0;
+
+	pdrv = to_platform_driver(dev->driver);
+	if (pdrv->pm) {
+		if (pdrv->pm->freeze_noirq)
+			ret = pdrv->pm->freeze_noirq(dev);
+	} else {
+		ret = platform_legacy_suspend_late(dev, PMSG_FREEZE);
+	}
+
+	return ret;
+}
+
+static int platform_pm_thaw(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->thaw)
+			ret = drv->pm->thaw(dev);
+	} else {
+		ret = platform_legacy_resume(dev);
+	}
+
+	return ret;
+}
+
+static int platform_pm_thaw_noirq(struct device *dev)
+{
+	struct platform_driver *pdrv;
+	int ret = 0;
+
+	if (!dev->driver)
+		return 0;
+
+	pdrv = to_platform_driver(dev->driver);
+	if (pdrv->pm) {
+		if (pdrv->pm->thaw_noirq)
+			ret = pdrv->pm->thaw_noirq(dev);
+	} else {
+		ret = platform_legacy_resume_early(dev);
+	}
+
+	return ret;
+}
+
+static int platform_pm_poweroff(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->poweroff)
+			ret = drv->pm->poweroff(dev);
+	} else {
+		ret = platform_legacy_suspend(dev, PMSG_HIBERNATE);
+	}
+
+	return ret;
+}
+
+static int platform_pm_poweroff_noirq(struct device *dev)
+{
+	struct platform_driver *pdrv;
+	int ret = 0;
+
+	if (!dev->driver)
+		return 0;
+
+	pdrv = to_platform_driver(dev->driver);
+	if (pdrv->pm) {
+		if (pdrv->pm->poweroff_noirq)
+			ret = pdrv->pm->poweroff_noirq(dev);
+	} else {
+		ret = platform_legacy_suspend_late(dev, PMSG_HIBERNATE);
+	}
+
+	return ret;
+}
+
+static int platform_pm_restore(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int ret = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->restore)
+			ret = drv->pm->restore(dev);
+	} else {
+		ret = platform_legacy_resume(dev);
+	}
+
+	return ret;
+}
+
+static int platform_pm_restore_noirq(struct device *dev)
+{
+	struct platform_driver *pdrv;
+	int ret = 0;
+
+	if (!dev->driver)
+		return 0;
+
+	pdrv = to_platform_driver(dev->driver);
+	if (pdrv->pm) {
+		if (pdrv->pm->restore_noirq)
+			ret = pdrv->pm->restore_noirq(dev);
+	} else {
+		ret = platform_legacy_resume_early(dev);
+	}
+
+	return ret;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define platform_pm_freeze		NULL
+#define platform_pm_thaw		NULL
+#define platform_pm_poweroff		NULL
+#define platform_pm_restore		NULL
+#define platform_pm_freeze_noirq	NULL
+#define platform_pm_thaw_noirq		NULL
+#define platform_pm_poweroff_noirq	NULL
+#define platform_pm_restore_noirq	NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+struct pm_ext_ops platform_pm_ops = {
+	.base = {
+		.prepare = platform_pm_prepare,
+		.complete = platform_pm_complete,
+		.suspend = platform_pm_suspend,
+		.resume = platform_pm_resume,
+		.freeze = platform_pm_freeze,
+		.thaw = platform_pm_thaw,
+		.poweroff = platform_pm_poweroff,
+		.restore = platform_pm_restore,
+	},
+	.suspend_noirq = platform_pm_suspend_noirq,
+	.resume_noirq = platform_pm_resume_noirq,
+	.freeze_noirq = platform_pm_freeze_noirq,
+	.thaw_noirq = platform_pm_thaw_noirq,
+	.poweroff_noirq = platform_pm_poweroff_noirq,
+	.restore_noirq = platform_pm_restore_noirq,
+};
+
+#define PLATFORM_PM_OPS_PTR	&platform_pm_ops
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define PLATFORM_PM_OPS_PTR	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
 struct bus_type platform_bus_type = {
 	.name		= "platform",
 	.dev_attrs	= platform_dev_attrs,
 	.match		= platform_match,
 	.uevent		= platform_uevent,
-	.suspend	= platform_suspend,
-	.suspend_late	= platform_suspend_late,
-	.resume_early	= platform_resume_early,
-	.resume		= platform_resume,
+	.pm		= PLATFORM_PM_OPS_PTR,
 };
 EXPORT_SYMBOL_GPL(platform_bus_type);
 
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 45cc3d9..3250c52 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -12,11 +12,9 @@
  * and add it to the list of power-controlled devices. sysfs entries for
  * controlling device power management will also be added.
  *
- * A different set of lists than the global subsystem list are used to
- * keep track of power info because we use different lists to hold
- * devices based on what stage of the power management process they
- * are in. The power domain dependencies may also differ from the
- * ancestral dependencies that the subsystem list maintains.
+ * A separate list is used for keeping track of power info, because the power
+ * domain dependencies may differ from the ancestral dependencies that the
+ * subsystem list maintains.
  */
 
 #include <linux/device.h>
@@ -30,31 +28,40 @@
 #include "power.h"
 
 /*
- * The entries in the dpm_active list are in a depth first order, simply
+ * The entries in the dpm_list list are in a depth first order, simply
  * because children are guaranteed to be discovered after parents, and
  * are inserted at the back of the list on discovery.
  *
- * All the other lists are kept in the same order, for consistency.
- * However the lists aren't always traversed in the same order.
- * Semaphores must be acquired from the top (i.e., front) down
- * and released in the opposite order.  Devices must be suspended
- * from the bottom (i.e., end) up and resumed in the opposite order.
- * That way no parent will be suspended while it still has an active
- * child.
- *
  * Since device_pm_add() may be called with a device semaphore held,
  * we must never try to acquire a device semaphore while holding
  * dpm_list_mutex.
  */
 
-LIST_HEAD(dpm_active);
-static LIST_HEAD(dpm_off);
-static LIST_HEAD(dpm_off_irq);
+LIST_HEAD(dpm_list);
 
 static DEFINE_MUTEX(dpm_list_mtx);
 
-/* 'true' if all devices have been suspended, protected by dpm_list_mtx */
-static bool all_sleeping;
+/*
+ * Set once the preparation of devices for a PM transition has started, reset
+ * before starting to resume devices.  Protected by dpm_list_mtx.
+ */
+static bool transition_started;
+
+/**
+ *	device_pm_lock - lock the list of active devices used by the PM core
+ */
+void device_pm_lock(void)
+{
+	mutex_lock(&dpm_list_mtx);
+}
+
+/**
+ *	device_pm_unlock - unlock the list of active devices used by the PM core
+ */
+void device_pm_unlock(void)
+{
+	mutex_unlock(&dpm_list_mtx);
+}
 
 /**
  *	device_pm_add - add a device to the list of active devices
@@ -68,17 +75,25 @@
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
-	if ((dev->parent && dev->parent->power.sleeping) || all_sleeping) {
-		if (dev->parent->power.sleeping)
-			dev_warn(dev, "parent %s is sleeping\n",
+	if (dev->parent) {
+		if (dev->parent->power.status >= DPM_SUSPENDING) {
+			dev_warn(dev, "parent %s is sleeping, will not add\n",
 				dev->parent->bus_id);
-		else
-			dev_warn(dev, "all devices are sleeping\n");
+			WARN_ON(true);
+		}
+	} else if (transition_started) {
+		/*
+		 * We refuse to register parentless devices while a PM
+		 * transition is in progress in order to avoid leaving them
+		 * unhandled down the road
+		 */
 		WARN_ON(true);
 	}
 	error = dpm_sysfs_add(dev);
-	if (!error)
-		list_add_tail(&dev->power.entry, &dpm_active);
+	if (!error) {
+		dev->power.status = DPM_ON;
+		list_add_tail(&dev->power.entry, &dpm_list);
+	}
 	mutex_unlock(&dpm_list_mtx);
 	return error;
 }
@@ -100,73 +115,243 @@
 	mutex_unlock(&dpm_list_mtx);
 }
 
+/**
+ *	pm_op - execute the PM operation appropiate for given PM event
+ *	@dev:	Device.
+ *	@ops:	PM operations to choose from.
+ *	@state:	PM transition of the system being carried out.
+ */
+static int pm_op(struct device *dev, struct pm_ops *ops, pm_message_t state)
+{
+	int error = 0;
+
+	switch (state.event) {
+#ifdef CONFIG_SUSPEND
+	case PM_EVENT_SUSPEND:
+		if (ops->suspend) {
+			error = ops->suspend(dev);
+			suspend_report_result(ops->suspend, error);
+		}
+		break;
+	case PM_EVENT_RESUME:
+		if (ops->resume) {
+			error = ops->resume(dev);
+			suspend_report_result(ops->resume, error);
+		}
+		break;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATION
+	case PM_EVENT_FREEZE:
+	case PM_EVENT_QUIESCE:
+		if (ops->freeze) {
+			error = ops->freeze(dev);
+			suspend_report_result(ops->freeze, error);
+		}
+		break;
+	case PM_EVENT_HIBERNATE:
+		if (ops->poweroff) {
+			error = ops->poweroff(dev);
+			suspend_report_result(ops->poweroff, error);
+		}
+		break;
+	case PM_EVENT_THAW:
+	case PM_EVENT_RECOVER:
+		if (ops->thaw) {
+			error = ops->thaw(dev);
+			suspend_report_result(ops->thaw, error);
+		}
+		break;
+	case PM_EVENT_RESTORE:
+		if (ops->restore) {
+			error = ops->restore(dev);
+			suspend_report_result(ops->restore, error);
+		}
+		break;
+#endif /* CONFIG_HIBERNATION */
+	default:
+		error = -EINVAL;
+	}
+	return error;
+}
+
+/**
+ *	pm_noirq_op - execute the PM operation appropiate for given PM event
+ *	@dev:	Device.
+ *	@ops:	PM operations to choose from.
+ *	@state: PM transition of the system being carried out.
+ *
+ *	The operation is executed with interrupts disabled by the only remaining
+ *	functional CPU in the system.
+ */
+static int pm_noirq_op(struct device *dev, struct pm_ext_ops *ops,
+			pm_message_t state)
+{
+	int error = 0;
+
+	switch (state.event) {
+#ifdef CONFIG_SUSPEND
+	case PM_EVENT_SUSPEND:
+		if (ops->suspend_noirq) {
+			error = ops->suspend_noirq(dev);
+			suspend_report_result(ops->suspend_noirq, error);
+		}
+		break;
+	case PM_EVENT_RESUME:
+		if (ops->resume_noirq) {
+			error = ops->resume_noirq(dev);
+			suspend_report_result(ops->resume_noirq, error);
+		}
+		break;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATION
+	case PM_EVENT_FREEZE:
+	case PM_EVENT_QUIESCE:
+		if (ops->freeze_noirq) {
+			error = ops->freeze_noirq(dev);
+			suspend_report_result(ops->freeze_noirq, error);
+		}
+		break;
+	case PM_EVENT_HIBERNATE:
+		if (ops->poweroff_noirq) {
+			error = ops->poweroff_noirq(dev);
+			suspend_report_result(ops->poweroff_noirq, error);
+		}
+		break;
+	case PM_EVENT_THAW:
+	case PM_EVENT_RECOVER:
+		if (ops->thaw_noirq) {
+			error = ops->thaw_noirq(dev);
+			suspend_report_result(ops->thaw_noirq, error);
+		}
+		break;
+	case PM_EVENT_RESTORE:
+		if (ops->restore_noirq) {
+			error = ops->restore_noirq(dev);
+			suspend_report_result(ops->restore_noirq, error);
+		}
+		break;
+#endif /* CONFIG_HIBERNATION */
+	default:
+		error = -EINVAL;
+	}
+	return error;
+}
+
+static char *pm_verb(int event)
+{
+	switch (event) {
+	case PM_EVENT_SUSPEND:
+		return "suspend";
+	case PM_EVENT_RESUME:
+		return "resume";
+	case PM_EVENT_FREEZE:
+		return "freeze";
+	case PM_EVENT_QUIESCE:
+		return "quiesce";
+	case PM_EVENT_HIBERNATE:
+		return "hibernate";
+	case PM_EVENT_THAW:
+		return "thaw";
+	case PM_EVENT_RESTORE:
+		return "restore";
+	case PM_EVENT_RECOVER:
+		return "recover";
+	default:
+		return "(unknown PM event)";
+	}
+}
+
+static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info)
+{
+	dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event),
+		((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ?
+		", may wakeup" : "");
+}
+
+static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
+			int error)
+{
+	printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n",
+		kobject_name(&dev->kobj), pm_verb(state.event), info, error);
+}
+
 /*------------------------- Resume routines -------------------------*/
 
 /**
- *	resume_device_early - Power on one device (early resume).
+ *	resume_device_noirq - Power on one device (early resume).
  *	@dev:	Device.
+ *	@state: PM transition of the system being carried out.
  *
  *	Must be called with interrupts disabled.
  */
-static int resume_device_early(struct device *dev)
+static int resume_device_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
 	TRACE_DEVICE(dev);
 	TRACE_RESUME(0);
 
-	if (dev->bus && dev->bus->resume_early) {
-		dev_dbg(dev, "EARLY resume\n");
+	if (!dev->bus)
+		goto End;
+
+	if (dev->bus->pm) {
+		pm_dev_dbg(dev, state, "EARLY ");
+		error = pm_noirq_op(dev, dev->bus->pm, state);
+	} else if (dev->bus->resume_early) {
+		pm_dev_dbg(dev, state, "legacy EARLY ");
 		error = dev->bus->resume_early(dev);
 	}
-
+ End:
 	TRACE_RESUME(error);
 	return error;
 }
 
 /**
  *	dpm_power_up - Power on all regular (non-sysdev) devices.
+ *	@state: PM transition of the system being carried out.
  *
- *	Walk the dpm_off_irq list and power each device up. This
- *	is used for devices that required they be powered down with
- *	interrupts disabled. As devices are powered on, they are moved
- *	to the dpm_off list.
+ *	Execute the appropriate "noirq resume" callback for all devices marked
+ *	as DPM_OFF_IRQ.
  *
  *	Must be called with interrupts disabled and only one CPU running.
  */
-static void dpm_power_up(void)
+static void dpm_power_up(pm_message_t state)
 {
+	struct device *dev;
 
-	while (!list_empty(&dpm_off_irq)) {
-		struct list_head *entry = dpm_off_irq.next;
-		struct device *dev = to_device(entry);
+	list_for_each_entry(dev, &dpm_list, power.entry)
+		if (dev->power.status > DPM_OFF) {
+			int error;
 
-		list_move_tail(entry, &dpm_off);
-		resume_device_early(dev);
-	}
+			dev->power.status = DPM_OFF;
+			error = resume_device_noirq(dev, state);
+			if (error)
+				pm_dev_err(dev, state, " early", error);
+		}
 }
 
 /**
  *	device_power_up - Turn on all devices that need special attention.
+ *	@state: PM transition of the system being carried out.
  *
  *	Power on system devices, then devices that required we shut them down
  *	with interrupts disabled.
  *
  *	Must be called with interrupts disabled.
  */
-void device_power_up(void)
+void device_power_up(pm_message_t state)
 {
 	sysdev_resume();
-	dpm_power_up();
+	dpm_power_up(state);
 }
 EXPORT_SYMBOL_GPL(device_power_up);
 
 /**
  *	resume_device - Restore state for one device.
  *	@dev:	Device.
- *
+ *	@state: PM transition of the system being carried out.
  */
-static int resume_device(struct device *dev)
+static int resume_device(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -175,21 +360,40 @@
 
 	down(&dev->sem);
 
-	if (dev->bus && dev->bus->resume) {
-		dev_dbg(dev,"resuming\n");
-		error = dev->bus->resume(dev);
+	if (dev->bus) {
+		if (dev->bus->pm) {
+			pm_dev_dbg(dev, state, "");
+			error = pm_op(dev, &dev->bus->pm->base, state);
+		} else if (dev->bus->resume) {
+			pm_dev_dbg(dev, state, "legacy ");
+			error = dev->bus->resume(dev);
+		}
+		if (error)
+			goto End;
 	}
 
-	if (!error && dev->type && dev->type->resume) {
-		dev_dbg(dev,"resuming\n");
-		error = dev->type->resume(dev);
+	if (dev->type) {
+		if (dev->type->pm) {
+			pm_dev_dbg(dev, state, "type ");
+			error = pm_op(dev, dev->type->pm, state);
+		} else if (dev->type->resume) {
+			pm_dev_dbg(dev, state, "legacy type ");
+			error = dev->type->resume(dev);
+		}
+		if (error)
+			goto End;
 	}
 
-	if (!error && dev->class && dev->class->resume) {
-		dev_dbg(dev,"class resume\n");
-		error = dev->class->resume(dev);
+	if (dev->class) {
+		if (dev->class->pm) {
+			pm_dev_dbg(dev, state, "class ");
+			error = pm_op(dev, dev->class->pm, state);
+		} else if (dev->class->resume) {
+			pm_dev_dbg(dev, state, "legacy class ");
+			error = dev->class->resume(dev);
+		}
 	}
-
+ End:
 	up(&dev->sem);
 
 	TRACE_RESUME(error);
@@ -198,78 +402,161 @@
 
 /**
  *	dpm_resume - Resume every device.
+ *	@state: PM transition of the system being carried out.
  *
- *	Resume the devices that have either not gone through
- *	the late suspend, or that did go through it but also
- *	went through the early resume.
- *
- *	Take devices from the dpm_off_list, resume them,
- *	and put them on the dpm_locked list.
+ *	Execute the appropriate "resume" callback for all devices the status of
+ *	which indicates that they are inactive.
  */
-static void dpm_resume(void)
+static void dpm_resume(pm_message_t state)
 {
-	mutex_lock(&dpm_list_mtx);
-	all_sleeping = false;
-	while(!list_empty(&dpm_off)) {
-		struct list_head *entry = dpm_off.next;
-		struct device *dev = to_device(entry);
+	struct list_head list;
 
-		list_move_tail(entry, &dpm_active);
-		dev->power.sleeping = false;
-		mutex_unlock(&dpm_list_mtx);
-		resume_device(dev);
-		mutex_lock(&dpm_list_mtx);
+	INIT_LIST_HEAD(&list);
+	mutex_lock(&dpm_list_mtx);
+	transition_started = false;
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.next);
+
+		get_device(dev);
+		if (dev->power.status >= DPM_OFF) {
+			int error;
+
+			dev->power.status = DPM_RESUMING;
+			mutex_unlock(&dpm_list_mtx);
+
+			error = resume_device(dev, state);
+
+			mutex_lock(&dpm_list_mtx);
+			if (error)
+				pm_dev_err(dev, state, "", error);
+		} else if (dev->power.status == DPM_SUSPENDING) {
+			/* Allow new children of the device to be registered */
+			dev->power.status = DPM_RESUMING;
+		}
+		if (!list_empty(&dev->power.entry))
+			list_move_tail(&dev->power.entry, &list);
+		put_device(dev);
 	}
+	list_splice(&list, &dpm_list);
+	mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ *	complete_device - Complete a PM transition for given device
+ *	@dev:	Device.
+ *	@state: PM transition of the system being carried out.
+ */
+static void complete_device(struct device *dev, pm_message_t state)
+{
+	down(&dev->sem);
+
+	if (dev->class && dev->class->pm && dev->class->pm->complete) {
+		pm_dev_dbg(dev, state, "completing class ");
+		dev->class->pm->complete(dev);
+	}
+
+	if (dev->type && dev->type->pm && dev->type->pm->complete) {
+		pm_dev_dbg(dev, state, "completing type ");
+		dev->type->pm->complete(dev);
+	}
+
+	if (dev->bus && dev->bus->pm && dev->bus->pm->base.complete) {
+		pm_dev_dbg(dev, state, "completing ");
+		dev->bus->pm->base.complete(dev);
+	}
+
+	up(&dev->sem);
+}
+
+/**
+ *	dpm_complete - Complete a PM transition for all devices.
+ *	@state: PM transition of the system being carried out.
+ *
+ *	Execute the ->complete() callbacks for all devices that are not marked
+ *	as DPM_ON.
+ */
+static void dpm_complete(pm_message_t state)
+{
+	struct list_head list;
+
+	INIT_LIST_HEAD(&list);
+	mutex_lock(&dpm_list_mtx);
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.prev);
+
+		get_device(dev);
+		if (dev->power.status > DPM_ON) {
+			dev->power.status = DPM_ON;
+			mutex_unlock(&dpm_list_mtx);
+
+			complete_device(dev, state);
+
+			mutex_lock(&dpm_list_mtx);
+		}
+		if (!list_empty(&dev->power.entry))
+			list_move(&dev->power.entry, &list);
+		put_device(dev);
+	}
+	list_splice(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 }
 
 /**
  *	device_resume - Restore state of each device in system.
+ *	@state: PM transition of the system being carried out.
  *
  *	Resume all the devices, unlock them all, and allow new
  *	devices to be registered once again.
  */
-void device_resume(void)
+void device_resume(pm_message_t state)
 {
 	might_sleep();
-	dpm_resume();
+	dpm_resume(state);
+	dpm_complete(state);
 }
 EXPORT_SYMBOL_GPL(device_resume);
 
 
 /*------------------------- Suspend routines -------------------------*/
 
-static inline char *suspend_verb(u32 event)
+/**
+ *	resume_event - return a PM message representing the resume event
+ *	               corresponding to given sleep state.
+ *	@sleep_state: PM message representing a sleep state.
+ */
+static pm_message_t resume_event(pm_message_t sleep_state)
 {
-	switch (event) {
-	case PM_EVENT_SUSPEND:	return "suspend";
-	case PM_EVENT_FREEZE:	return "freeze";
-	case PM_EVENT_PRETHAW:	return "prethaw";
-	default:		return "(unknown suspend event)";
+	switch (sleep_state.event) {
+	case PM_EVENT_SUSPEND:
+		return PMSG_RESUME;
+	case PM_EVENT_FREEZE:
+	case PM_EVENT_QUIESCE:
+		return PMSG_RECOVER;
+	case PM_EVENT_HIBERNATE:
+		return PMSG_RESTORE;
 	}
-}
-
-static void
-suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
-{
-	dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
-		((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
-		", may wakeup" : "");
+	return PMSG_ON;
 }
 
 /**
- *	suspend_device_late - Shut down one device (late suspend).
+ *	suspend_device_noirq - Shut down one device (late suspend).
  *	@dev:	Device.
- *	@state:	Power state device is entering.
+ *	@state: PM transition of the system being carried out.
  *
  *	This is called with interrupts off and only a single CPU running.
  */
-static int suspend_device_late(struct device *dev, pm_message_t state)
+static int suspend_device_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
-	if (dev->bus && dev->bus->suspend_late) {
-		suspend_device_dbg(dev, state, "LATE ");
+	if (!dev->bus)
+		return 0;
+
+	if (dev->bus->pm) {
+		pm_dev_dbg(dev, state, "LATE ");
+		error = pm_noirq_op(dev, dev->bus->pm, state);
+	} else if (dev->bus->suspend_late) {
+		pm_dev_dbg(dev, state, "legacy LATE ");
 		error = dev->bus->suspend_late(dev, state);
 		suspend_report_result(dev->bus->suspend_late, error);
 	}
@@ -278,37 +565,30 @@
 
 /**
  *	device_power_down - Shut down special devices.
- *	@state:		Power state to enter.
+ *	@state: PM transition of the system being carried out.
  *
- *	Power down devices that require interrupts to be disabled
- *	and move them from the dpm_off list to the dpm_off_irq list.
+ *	Power down devices that require interrupts to be disabled.
  *	Then power down system devices.
  *
  *	Must be called with interrupts disabled and only one CPU running.
  */
 int device_power_down(pm_message_t state)
 {
+	struct device *dev;
 	int error = 0;
 
-	while (!list_empty(&dpm_off)) {
-		struct list_head *entry = dpm_off.prev;
-		struct device *dev = to_device(entry);
-
-		error = suspend_device_late(dev, state);
+	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
+		error = suspend_device_noirq(dev, state);
 		if (error) {
-			printk(KERN_ERR "Could not power down device %s: "
-					"error %d\n",
-					kobject_name(&dev->kobj), error);
+			pm_dev_err(dev, state, " late", error);
 			break;
 		}
-		if (!list_empty(&dev->power.entry))
-			list_move(&dev->power.entry, &dpm_off_irq);
+		dev->power.status = DPM_OFF_IRQ;
 	}
-
 	if (!error)
 		error = sysdev_suspend(state);
 	if (error)
-		dpm_power_up();
+		dpm_power_up(resume_event(state));
 	return error;
 }
 EXPORT_SYMBOL_GPL(device_power_down);
@@ -316,7 +596,7 @@
 /**
  *	suspend_device - Save state of one device.
  *	@dev:	Device.
- *	@state:	Power state device is entering.
+ *	@state: PM transition of the system being carried out.
  */
 static int suspend_device(struct device *dev, pm_message_t state)
 {
@@ -324,24 +604,43 @@
 
 	down(&dev->sem);
 
-	if (dev->class && dev->class->suspend) {
-		suspend_device_dbg(dev, state, "class ");
-		error = dev->class->suspend(dev, state);
-		suspend_report_result(dev->class->suspend, error);
+	if (dev->class) {
+		if (dev->class->pm) {
+			pm_dev_dbg(dev, state, "class ");
+			error = pm_op(dev, dev->class->pm, state);
+		} else if (dev->class->suspend) {
+			pm_dev_dbg(dev, state, "legacy class ");
+			error = dev->class->suspend(dev, state);
+			suspend_report_result(dev->class->suspend, error);
+		}
+		if (error)
+			goto End;
 	}
 
-	if (!error && dev->type && dev->type->suspend) {
-		suspend_device_dbg(dev, state, "type ");
-		error = dev->type->suspend(dev, state);
-		suspend_report_result(dev->type->suspend, error);
+	if (dev->type) {
+		if (dev->type->pm) {
+			pm_dev_dbg(dev, state, "type ");
+			error = pm_op(dev, dev->type->pm, state);
+		} else if (dev->type->suspend) {
+			pm_dev_dbg(dev, state, "legacy type ");
+			error = dev->type->suspend(dev, state);
+			suspend_report_result(dev->type->suspend, error);
+		}
+		if (error)
+			goto End;
 	}
 
-	if (!error && dev->bus && dev->bus->suspend) {
-		suspend_device_dbg(dev, state, "");
-		error = dev->bus->suspend(dev, state);
-		suspend_report_result(dev->bus->suspend, error);
+	if (dev->bus) {
+		if (dev->bus->pm) {
+			pm_dev_dbg(dev, state, "");
+			error = pm_op(dev, &dev->bus->pm->base, state);
+		} else if (dev->bus->suspend) {
+			pm_dev_dbg(dev, state, "legacy ");
+			error = dev->bus->suspend(dev, state);
+			suspend_report_result(dev->bus->suspend, error);
+		}
 	}
-
+ End:
 	up(&dev->sem);
 
 	return error;
@@ -349,67 +648,139 @@
 
 /**
  *	dpm_suspend - Suspend every device.
- *	@state:	Power state to put each device in.
+ *	@state: PM transition of the system being carried out.
  *
- *	Walk the dpm_locked list.  Suspend each device and move it
- *	to the dpm_off list.
- *
- *	(For historical reasons, if it returns -EAGAIN, that used to mean
- *	that the device would be called again with interrupts disabled.
- *	These days, we use the "suspend_late()" callback for that, so we
- *	print a warning and consider it an error).
+ *	Execute the appropriate "suspend" callbacks for all devices.
  */
 static int dpm_suspend(pm_message_t state)
 {
+	struct list_head list;
 	int error = 0;
 
+	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
-	while (!list_empty(&dpm_active)) {
-		struct list_head *entry = dpm_active.prev;
-		struct device *dev = to_device(entry);
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.prev);
 
-		WARN_ON(dev->parent && dev->parent->power.sleeping);
-
-		dev->power.sleeping = true;
+		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
+
 		error = suspend_device(dev, state);
+
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
-			printk(KERN_ERR "Could not suspend device %s: "
-					"error %d%s\n",
-					kobject_name(&dev->kobj),
-					error,
-					(error == -EAGAIN ?
-					" (please convert to suspend_late)" :
-					""));
-			dev->power.sleeping = false;
+			pm_dev_err(dev, state, "", error);
+			put_device(dev);
 			break;
 		}
+		dev->power.status = DPM_OFF;
 		if (!list_empty(&dev->power.entry))
-			list_move(&dev->power.entry, &dpm_off);
+			list_move(&dev->power.entry, &list);
+		put_device(dev);
 	}
-	if (!error)
-		all_sleeping = true;
+	list_splice(&list, dpm_list.prev);
 	mutex_unlock(&dpm_list_mtx);
+	return error;
+}
+
+/**
+ *	prepare_device - Execute the ->prepare() callback(s) for given device.
+ *	@dev:	Device.
+ *	@state: PM transition of the system being carried out.
+ */
+static int prepare_device(struct device *dev, pm_message_t state)
+{
+	int error = 0;
+
+	down(&dev->sem);
+
+	if (dev->bus && dev->bus->pm && dev->bus->pm->base.prepare) {
+		pm_dev_dbg(dev, state, "preparing ");
+		error = dev->bus->pm->base.prepare(dev);
+		suspend_report_result(dev->bus->pm->base.prepare, error);
+		if (error)
+			goto End;
+	}
+
+	if (dev->type && dev->type->pm && dev->type->pm->prepare) {
+		pm_dev_dbg(dev, state, "preparing type ");
+		error = dev->type->pm->prepare(dev);
+		suspend_report_result(dev->type->pm->prepare, error);
+		if (error)
+			goto End;
+	}
+
+	if (dev->class && dev->class->pm && dev->class->pm->prepare) {
+		pm_dev_dbg(dev, state, "preparing class ");
+		error = dev->class->pm->prepare(dev);
+		suspend_report_result(dev->class->pm->prepare, error);
+	}
+ End:
+	up(&dev->sem);
 
 	return error;
 }
 
 /**
- *	device_suspend - Save state and stop all devices in system.
- *	@state: new power management state
+ *	dpm_prepare - Prepare all devices for a PM transition.
+ *	@state: PM transition of the system being carried out.
  *
- *	Prevent new devices from being registered, then lock all devices
- *	and suspend them.
+ *	Execute the ->prepare() callback for all devices.
+ */
+static int dpm_prepare(pm_message_t state)
+{
+	struct list_head list;
+	int error = 0;
+
+	INIT_LIST_HEAD(&list);
+	mutex_lock(&dpm_list_mtx);
+	transition_started = true;
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.next);
+
+		get_device(dev);
+		dev->power.status = DPM_PREPARING;
+		mutex_unlock(&dpm_list_mtx);
+
+		error = prepare_device(dev, state);
+
+		mutex_lock(&dpm_list_mtx);
+		if (error) {
+			dev->power.status = DPM_ON;
+			if (error == -EAGAIN) {
+				put_device(dev);
+				continue;
+			}
+			printk(KERN_ERR "PM: Failed to prepare device %s "
+				"for power transition: error %d\n",
+				kobject_name(&dev->kobj), error);
+			put_device(dev);
+			break;
+		}
+		dev->power.status = DPM_SUSPENDING;
+		if (!list_empty(&dev->power.entry))
+			list_move_tail(&dev->power.entry, &list);
+		put_device(dev);
+	}
+	list_splice(&list, &dpm_list);
+	mutex_unlock(&dpm_list_mtx);
+	return error;
+}
+
+/**
+ *	device_suspend - Save state and stop all devices in system.
+ *	@state: PM transition of the system being carried out.
+ *
+ *	Prepare and suspend all devices.
  */
 int device_suspend(pm_message_t state)
 {
 	int error;
 
 	might_sleep();
-	error = dpm_suspend(state);
-	if (error)
-		device_resume();
+	error = dpm_prepare(state);
+	if (!error)
+		error = dpm_suspend(state);
 	return error;
 }
 EXPORT_SYMBOL_GPL(device_suspend);
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index a6894f2..a3252c0 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -4,7 +4,7 @@
  * main.c
  */
 
-extern struct list_head dpm_active;	/* The active device list */
+extern struct list_head dpm_list;	/* The active device list */
 
 static inline struct device *to_device(struct list_head *entry)
 {
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index d11f74b..596aeec 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -6,9 +6,6 @@
 #include <linux/string.h>
 #include "power.h"
 
-int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-
 /*
  *	wakeup - Report/change current wakeup option for device
  *
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index 87a7f1d..9b1b20b 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -188,9 +188,9 @@
 static int show_dev_hash(unsigned int value)
 {
 	int match = 0;
-	struct list_head * entry = dpm_active.prev;
+	struct list_head *entry = dpm_list.prev;
 
-	while (entry != &dpm_active) {
+	while (entry != &dpm_list) {
 		struct device * dev = to_device(entry);
 		unsigned int hash = hash_string(DEVSEED, dev->bus_id, DEVHASH);
 		if (hash == value) {
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4d1ce2e..7d63f8c 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the PCI bus specific drivers.
 #
 
-obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
+obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index f8c187a..93e37f0 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -30,6 +30,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/pci-acpi.h>
 #include <acpi/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/actypes.h>
@@ -299,7 +300,7 @@
  *
  * @handle - the handle of the hotplug controller.
  */
-acpi_status acpi_run_oshp(acpi_handle handle)
+static acpi_status acpi_run_oshp(acpi_handle handle)
 {
 	acpi_status		status;
 	struct acpi_buffer	string = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -322,9 +323,6 @@
 	kfree(string.pointer);
 	return status;
 }
-EXPORT_SYMBOL_GPL(acpi_run_oshp);
-
-
 
 /* acpi_get_hp_params_from_firmware
  *
@@ -374,6 +372,85 @@
 }
 EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
 
+/**
+ * acpi_get_hp_hw_control_from_firmware
+ * @dev: the pci_dev of the bridge that has a hotplug controller
+ * @flags: requested control bits for _OSC
+ *
+ * Attempt to take hotplug control from firmware.
+ */
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
+{
+	acpi_status status;
+	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+	struct pci_dev *pdev = dev;
+	struct pci_bus *parent;
+	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	flags &= (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
+		  OSC_SHPC_NATIVE_HP_CONTROL |
+		  OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+	if (!flags) {
+		err("Invalid flags %u specified!\n", flags);
+		return -EINVAL;
+	}
+
+	/*
+	 * Per PCI firmware specification, we should run the ACPI _OSC
+	 * method to get control of hotplug hardware before using it. If
+	 * an _OSC is missing, we look for an OSHP to do the same thing.
+	 * To handle different BIOS behavior, we look for _OSC and OSHP
+	 * within the scope of the hotplug controller and its parents,
+	 * upto the host bridge under which this controller exists.
+	 */
+	while (!handle) {
+		/*
+		 * This hotplug controller was not listed in the ACPI name
+		 * space at all. Try to get acpi handle of parent pci bus.
+		 */
+		if (!pdev || !pdev->bus->parent)
+			break;
+		parent = pdev->bus->parent;
+		dbg("Could not find %s in acpi namespace, trying parent\n",
+		    pci_name(pdev));
+		if (!parent->self)
+			/* Parent must be a host bridge */
+			handle = acpi_get_pci_rootbridge_handle(
+					pci_domain_nr(parent),
+					parent->number);
+		else
+			handle = DEVICE_ACPI_HANDLE(&(parent->self->dev));
+		pdev = parent->self;
+	}
+
+	while (handle) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+		dbg("Trying to get hotplug control for %s \n",
+		    (char *)string.pointer);
+		status = pci_osc_control_set(handle, flags);
+		if (status == AE_NOT_FOUND)
+			status = acpi_run_oshp(handle);
+		if (ACPI_SUCCESS(status)) {
+			dbg("Gained control for hotplug HW for pci %s (%s)\n",
+			    pci_name(dev), (char *)string.pointer);
+			kfree(string.pointer);
+			return 0;
+		}
+		if (acpi_root_bridge(handle))
+			break;
+		chandle = handle;
+		status = acpi_get_parent(chandle, &handle);
+		if (ACPI_FAILURE(status))
+			break;
+	}
+
+	dbg("Cannot get control of hotplug hardware for pci %s\n",
+	    pci_name(dev));
+
+	kfree(string.pointer);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
 
 /* acpi_root_bridge - check to see if this acpi object is a root bridge
  *
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index 7a29164..eecf7cb 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -215,7 +215,6 @@
 extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
 extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);
 extern u8 acpiphp_get_adapter_status (struct acpiphp_slot *slot);
-extern u32 acpiphp_get_address (struct acpiphp_slot *slot);
 
 /* variables */
 extern int acpiphp_debug;
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 7af68ba..0e496e8 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -70,7 +70,6 @@
 static int set_attention_status (struct hotplug_slot *slot, u8 value);
 static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status (struct hotplug_slot *slot, u8 *value);
-static int get_address		(struct hotplug_slot *slot, u32 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
 
@@ -83,7 +82,6 @@
 	.get_attention_status	= get_attention_status,
 	.get_latch_status	= get_latch_status,
 	.get_adapter_status	= get_adapter_status,
-	.get_address		= get_address,
 };
 
 
@@ -274,23 +272,6 @@
 	return 0;
 }
 
-
-/**
- * get_address - get pci address of a slot
- * @hotplug_slot: slot to get status
- * @value: pointer to struct pci_busdev (seg, bus, dev)
- */
-static int get_address(struct hotplug_slot *hotplug_slot, u32 *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
-	*value = acpiphp_get_address(slot->acpi_slot);
-
-	return 0;
-}
-
 static int __init init_acpi(void)
 {
 	int retval;
@@ -357,7 +338,11 @@
 	acpiphp_slot->slot = slot;
 	snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun);
 
-	retval = pci_hp_register(slot->hotplug_slot);
+	retval = pci_hp_register(slot->hotplug_slot,
+					acpiphp_slot->bridge->pci_bus,
+					acpiphp_slot->device);
+	if (retval == -EBUSY)
+		goto error_hpslot;
 	if (retval) {
 		err("pci_hp_register failed with error %d\n", retval);
 		goto error_hpslot;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 91156f8..a3e4705 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -258,7 +258,12 @@
 				bridge->pci_bus->number, slot->device);
 		retval = acpiphp_register_hotplug_slot(slot);
 		if (retval) {
-			warn("acpiphp_register_hotplug_slot failed(err code = 0x%x)\n", retval);
+			if (retval == -EBUSY)
+				warn("Slot %d already registered by another "
+					"hotplug driver\n", slot->sun);
+			else
+				warn("acpiphp_register_hotplug_slot failed "
+					"(err code = 0x%x)\n", retval);
 			goto err_exit;
 		}
 	}
@@ -1878,19 +1883,3 @@
 
 	return (sta == 0) ? 0 : 1;
 }
-
-
-/*
- * pci address (seg/bus/dev)
- */
-u32 acpiphp_get_address(struct acpiphp_slot *slot)
-{
-	u32 address;
-	struct pci_bus *pci_bus = slot->bridge->pci_bus;
-
-	address = (pci_domain_nr(pci_bus) << 16) |
-		  (pci_bus->number << 8) |
-		  slot->device;
-
-	return address;
-}
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index ede9051..2b7c45e 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -33,8 +33,10 @@
 #include <linux/kobject.h>
 #include <asm/uaccess.h>
 #include <linux/moduleparam.h>
+#include <linux/pci.h>
 
 #include "acpiphp.h"
+#include "../pci.h"
 
 #define DRIVER_VERSION	"1.0.1"
 #define DRIVER_AUTHOR	"Irene Zubarev <zubarev@us.ibm.com>, Vernon Mauery <vernux@us.ibm.com>"
@@ -430,7 +432,7 @@
 	int retval = 0;
 	acpi_status status;
 	struct acpi_device *device;
-	struct kobject *sysdir = &pci_hotplug_slots_kset->kobj;
+	struct kobject *sysdir = &pci_slots_kset->kobj;
 
 	dbg("%s\n", __func__);
 
@@ -477,7 +479,7 @@
 static void __exit ibm_acpiphp_exit(void)
 {
 	acpi_status status;
-	struct kobject *sysdir = &pci_hotplug_slots_kset->kobj;
+	struct kobject *sysdir = &pci_slots_kset->kobj;
 
 	dbg("%s\n", __func__);
 
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index d8a6b80..9359479 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -285,7 +285,7 @@
 		info->attention_status = cpci_get_attention_status(slot);
 
 		dbg("registering slot %s", slot->hotplug_slot->name);
-		status = pci_hp_register(slot->hotplug_slot);
+		status = pci_hp_register(slot->hotplug_slot, bus, i);
 		if (status) {
 			err("pci_hp_register failed with error %d", status);
 			goto error_name;
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 36b115b..54defec 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -434,7 +434,9 @@
 				slot->bus, slot->device,
 				slot->number, ctrl->slot_device_offset,
 				slot_number);
-		result = pci_hp_register(hotplug_slot);
+		result = pci_hp_register(hotplug_slot,
+					 ctrl->pci_dev->subordinate,
+					 slot->device);
 		if (result) {
 			err("pci_hp_register failed with error %d\n", result);
 			goto error_name;
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 7e9a827..40337a0 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -66,6 +66,7 @@
 	struct pci_dev *dev;
 	struct work_struct remove_work;
 	unsigned long removed;
+	char name[8];
 };
 
 static int debug;
@@ -100,6 +101,7 @@
 	struct dummy_slot *dslot;
 	struct hotplug_slot *slot;
 	int retval = -ENOMEM;
+	static int count = 1;
 
 	slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
 	if (!slot)
@@ -113,18 +115,18 @@
 	slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
 	slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
-	slot->name = &dev->dev.bus_id[0];
-	dbg("slot->name = %s\n", slot->name);
-
 	dslot = kzalloc(sizeof(struct dummy_slot), GFP_KERNEL);
 	if (!dslot)
 		goto error_info;
 
+	slot->name = dslot->name;
+	snprintf(slot->name, sizeof(dslot->name), "fake%d", count++);
+	dbg("slot->name = %s\n", slot->name);
 	slot->ops = &dummy_hotplug_slot_ops;
 	slot->release = &dummy_release;
 	slot->private = dslot;
 
-	retval = pci_hp_register(slot);
+	retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn));
 	if (retval) {
 		err("pci_hp_register failed with error %d\n", retval);
 		goto error_dslot;
@@ -148,17 +150,17 @@
 static int __init pci_scan_buses(void)
 {
 	struct pci_dev *dev = NULL;
-	int retval = 0;
+	int lastslot = 0;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		retval = add_slot(dev);
-		if (retval) {
-			pci_dev_put(dev);
-			break;
-		}
+		if (PCI_FUNC(dev->devfn) > 0 &&
+				lastslot == PCI_SLOT(dev->devfn))
+			continue;
+		lastslot = PCI_SLOT(dev->devfn);
+		add_slot(dev);
 	}
 
-	return retval;
+	return 0;
 }
 
 static void remove_slot(struct dummy_slot *dslot)
@@ -296,23 +298,9 @@
 	return 0;
 }
 
-/* find the hotplug_slot for the pci_dev */
-static struct hotplug_slot *get_slot_from_dev(struct pci_dev *dev)
-{
-	struct dummy_slot *dslot;
-
-	list_for_each_entry(dslot, &slot_list, node) {
-		if (dslot->dev == dev)
-			return dslot->slot;
-	}
-	return NULL;
-}
-
-
 static int disable_slot(struct hotplug_slot *slot)
 {
 	struct dummy_slot *dslot;
-	struct hotplug_slot *hslot;
 	struct pci_dev *dev;
 	int func;
 
@@ -322,41 +310,27 @@
 
 	dbg("%s - physical_slot = %s\n", __func__, slot->name);
 
-	/* don't disable bridged devices just yet, we can't handle them easily... */
-	if (dslot->dev->subordinate) {
-		err("Can't remove PCI devices with other PCI devices behind it yet.\n");
-		return -ENODEV;
-	}
-	if (test_and_set_bit(0, &dslot->removed)) {
-		dbg("Slot already scheduled for removal\n");
-		return -ENODEV;
-	}
-	/* search for subfunctions and disable them first */
-	if (!(dslot->dev->devfn & 7)) {
-		for (func = 1; func < 8; func++) {
-			dev = pci_get_slot(dslot->dev->bus,
-					dslot->dev->devfn + func);
-			if (dev) {
-				hslot = get_slot_from_dev(dev);
-				if (hslot)
-					disable_slot(hslot);
-				else {
-					err("Hotplug slot not found for subfunction of PCI device\n");
-					return -ENODEV;
-				}
-				pci_dev_put(dev);
-			} else
-				dbg("No device in slot found\n");
+	for (func = 7; func >= 0; func--) {
+		dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func);
+		if (!dev)
+			continue;
+
+		if (test_and_set_bit(0, &dslot->removed)) {
+			dbg("Slot already scheduled for removal\n");
+			return -ENODEV;
 		}
+
+		/* queue work item to blow away this sysfs entry and other
+		 * parts.
+		 */
+		INIT_WORK(&dslot->remove_work, remove_slot_worker);
+		queue_work(dummyphp_wq, &dslot->remove_work);
+
+		/* blow away this sysfs entry and other parts. */
+		remove_slot(dslot);
+
+		pci_dev_put(dev);
 	}
-
-	/* remove the device from the pci core */
-	pci_remove_bus_device(dslot->dev);
-
-	/* queue work item to blow away this sysfs entry and other parts. */
-	INIT_WORK(&dslot->remove_work, remove_slot_worker);
-	queue_work(dummyphp_wq, &dslot->remove_work);
-
 	return 0;
 }
 
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index dca7efc..8467d02 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -1001,7 +1001,8 @@
 		tmp_slot = list_entry (list, struct slot, ibm_slot_list);
 
 		snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot));
-		pci_hp_register (tmp_slot->hotplug_slot);
+		pci_hp_register(tmp_slot->hotplug_slot,
+			pci_find_bus(0, tmp_slot->bus), tmp_slot->device);
 	}
 
 	print_ebda_hpc ();
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index a11021e..5f85b1b 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -40,6 +40,7 @@
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <asm/uaccess.h>
+#include "../pci.h"
 
 #define MY_NAME	"pci_hotplug"
 
@@ -60,41 +61,7 @@
 //////////////////////////////////////////////////////////////////
 
 static LIST_HEAD(pci_hotplug_slot_list);
-
-struct kset *pci_hotplug_slots_kset;
-
-static ssize_t hotplug_slot_attr_show(struct kobject *kobj,
-		struct attribute *attr, char *buf)
-{
-	struct hotplug_slot *slot = to_hotplug_slot(kobj);
-	struct hotplug_slot_attribute *attribute = to_hotplug_attr(attr);
-	return attribute->show ? attribute->show(slot, buf) : -EIO;
-}
-
-static ssize_t hotplug_slot_attr_store(struct kobject *kobj,
-		struct attribute *attr, const char *buf, size_t len)
-{
-	struct hotplug_slot *slot = to_hotplug_slot(kobj);
-	struct hotplug_slot_attribute *attribute = to_hotplug_attr(attr);
-	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
-}
-
-static struct sysfs_ops hotplug_slot_sysfs_ops = {
-	.show = hotplug_slot_attr_show,
-	.store = hotplug_slot_attr_store,
-};
-
-static void hotplug_slot_release(struct kobject *kobj)
-{
-	struct hotplug_slot *slot = to_hotplug_slot(kobj);
-	if (slot->release)
-		slot->release(slot);
-}
-
-static struct kobj_type hotplug_slot_ktype = {
-	.sysfs_ops = &hotplug_slot_sysfs_ops,
-	.release = &hotplug_slot_release,
-};
+static DEFINE_SPINLOCK(pci_hotplug_slot_list_lock);
 
 /* these strings match up with the values in pci_bus_speed */
 static char *pci_bus_speed_strings[] = {
@@ -149,16 +116,15 @@
 GET_STATUS(attention_status, u8)
 GET_STATUS(latch_status, u8)
 GET_STATUS(adapter_status, u8)
-GET_STATUS(address, u32)
 GET_STATUS(max_bus_speed, enum pci_bus_speed)
 GET_STATUS(cur_bus_speed, enum pci_bus_speed)
 
-static ssize_t power_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t power_read_file(struct pci_slot *slot, char *buf)
 {
 	int retval;
 	u8 value;
 
-	retval = get_power_status (slot, &value);
+	retval = get_power_status(slot->hotplug, &value);
 	if (retval)
 		goto exit;
 	retval = sprintf (buf, "%d\n", value);
@@ -166,9 +132,10 @@
 	return retval;
 }
 
-static ssize_t power_write_file (struct hotplug_slot *slot, const char *buf,
+static ssize_t power_write_file(struct pci_slot *pci_slot, const char *buf,
 		size_t count)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	unsigned long lpower;
 	u8 power;
 	int retval = 0;
@@ -204,29 +171,30 @@
 	return count;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_power = {
+static struct pci_slot_attribute hotplug_slot_attr_power = {
 	.attr = {.name = "power", .mode = S_IFREG | S_IRUGO | S_IWUSR},
 	.show = power_read_file,
 	.store = power_write_file
 };
 
-static ssize_t attention_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t attention_read_file(struct pci_slot *slot, char *buf)
 {
 	int retval;
 	u8 value;
 
-	retval = get_attention_status (slot, &value);
+	retval = get_attention_status(slot->hotplug, &value);
 	if (retval)
 		goto exit;
-	retval = sprintf (buf, "%d\n", value);
+	retval = sprintf(buf, "%d\n", value);
 
 exit:
 	return retval;
 }
 
-static ssize_t attention_write_file (struct hotplug_slot *slot, const char *buf,
+static ssize_t attention_write_file(struct pci_slot *slot, const char *buf,
 		size_t count)
 {
+	struct hotplug_slot_ops *ops = slot->hotplug->ops;
 	unsigned long lattention;
 	u8 attention;
 	int retval = 0;
@@ -235,13 +203,13 @@
 	attention = (u8)(lattention & 0xff);
 	dbg (" - attention = %d\n", attention);
 
-	if (!try_module_get(slot->ops->owner)) {
+	if (!try_module_get(ops->owner)) {
 		retval = -ENODEV;
 		goto exit;
 	}
-	if (slot->ops->set_attention_status)
-		retval = slot->ops->set_attention_status(slot, attention);
-	module_put(slot->ops->owner);
+	if (ops->set_attention_status)
+		retval = ops->set_attention_status(slot->hotplug, attention);
+	module_put(ops->owner);
 
 exit:	
 	if (retval)
@@ -249,18 +217,18 @@
 	return count;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_attention = {
+static struct pci_slot_attribute hotplug_slot_attr_attention = {
 	.attr = {.name = "attention", .mode = S_IFREG | S_IRUGO | S_IWUSR},
 	.show = attention_read_file,
 	.store = attention_write_file
 };
 
-static ssize_t latch_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t latch_read_file(struct pci_slot *slot, char *buf)
 {
 	int retval;
 	u8 value;
 
-	retval = get_latch_status (slot, &value);
+	retval = get_latch_status(slot->hotplug, &value);
 	if (retval)
 		goto exit;
 	retval = sprintf (buf, "%d\n", value);
@@ -269,17 +237,17 @@
 	return retval;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_latch = {
+static struct pci_slot_attribute hotplug_slot_attr_latch = {
 	.attr = {.name = "latch", .mode = S_IFREG | S_IRUGO},
 	.show = latch_read_file,
 };
 
-static ssize_t presence_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t presence_read_file(struct pci_slot *slot, char *buf)
 {
 	int retval;
 	u8 value;
 
-	retval = get_adapter_status (slot, &value);
+	retval = get_adapter_status(slot->hotplug, &value);
 	if (retval)
 		goto exit;
 	retval = sprintf (buf, "%d\n", value);
@@ -288,42 +256,20 @@
 	return retval;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_presence = {
+static struct pci_slot_attribute hotplug_slot_attr_presence = {
 	.attr = {.name = "adapter", .mode = S_IFREG | S_IRUGO},
 	.show = presence_read_file,
 };
 
-static ssize_t address_read_file (struct hotplug_slot *slot, char *buf)
-{
-	int retval;
-	u32 address;
-
-	retval = get_address (slot, &address);
-	if (retval)
-		goto exit;
-	retval = sprintf (buf, "%04x:%02x:%02x\n",
-			  (address >> 16) & 0xffff,
-			  (address >> 8) & 0xff,
-			  address & 0xff);
-
-exit:
-	return retval;
-}
-
-static struct hotplug_slot_attribute hotplug_slot_attr_address = {
-	.attr = {.name = "address", .mode = S_IFREG | S_IRUGO},
-	.show = address_read_file,
-};
-
 static char *unknown_speed = "Unknown bus speed";
 
-static ssize_t max_bus_speed_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
 {
 	char *speed_string;
 	int retval;
 	enum pci_bus_speed value;
 	
-	retval = get_max_bus_speed (slot, &value);
+	retval = get_max_bus_speed(slot->hotplug, &value);
 	if (retval)
 		goto exit;
 
@@ -338,18 +284,18 @@
 	return retval;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_max_bus_speed = {
+static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
 	.attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
 	.show = max_bus_speed_read_file,
 };
 
-static ssize_t cur_bus_speed_read_file (struct hotplug_slot *slot, char *buf)
+static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
 {
 	char *speed_string;
 	int retval;
 	enum pci_bus_speed value;
 
-	retval = get_cur_bus_speed (slot, &value);
+	retval = get_cur_bus_speed(slot->hotplug, &value);
 	if (retval)
 		goto exit;
 
@@ -364,14 +310,15 @@
 	return retval;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_cur_bus_speed = {
+static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
 	.attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
 	.show = cur_bus_speed_read_file,
 };
 
-static ssize_t test_write_file (struct hotplug_slot *slot, const char *buf,
+static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
 		size_t count)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	unsigned long ltest;
 	u32 test;
 	int retval = 0;
@@ -394,13 +341,14 @@
 	return count;
 }
 
-static struct hotplug_slot_attribute hotplug_slot_attr_test = {
+static struct pci_slot_attribute hotplug_slot_attr_test = {
 	.attr = {.name = "test", .mode = S_IFREG | S_IRUGO | S_IWUSR},
 	.store = test_write_file
 };
 
-static int has_power_file (struct hotplug_slot *slot)
+static int has_power_file(struct pci_slot *pci_slot)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if ((slot->ops->enable_slot) ||
@@ -410,8 +358,9 @@
 	return -ENOENT;
 }
 
-static int has_attention_file (struct hotplug_slot *slot)
+static int has_attention_file(struct pci_slot *pci_slot)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if ((slot->ops->set_attention_status) ||
@@ -420,8 +369,9 @@
 	return -ENOENT;
 }
 
-static int has_latch_file (struct hotplug_slot *slot)
+static int has_latch_file(struct pci_slot *pci_slot)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if (slot->ops->get_latch_status)
@@ -429,8 +379,9 @@
 	return -ENOENT;
 }
 
-static int has_adapter_file (struct hotplug_slot *slot)
+static int has_adapter_file(struct pci_slot *pci_slot)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if (slot->ops->get_adapter_status)
@@ -438,17 +389,9 @@
 	return -ENOENT;
 }
 
-static int has_address_file (struct hotplug_slot *slot)
+static int has_max_bus_speed_file(struct pci_slot *pci_slot)
 {
-	if ((!slot) || (!slot->ops))
-		return -ENODEV;
-	if (slot->ops->get_address)
-		return 0;
-	return -ENOENT;
-}
-
-static int has_max_bus_speed_file (struct hotplug_slot *slot)
-{
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if (slot->ops->get_max_bus_speed)
@@ -456,8 +399,9 @@
 	return -ENOENT;
 }
 
-static int has_cur_bus_speed_file (struct hotplug_slot *slot)
+static int has_cur_bus_speed_file(struct pci_slot *pci_slot)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if (slot->ops->get_cur_bus_speed)
@@ -465,8 +409,9 @@
 	return -ENOENT;
 }
 
-static int has_test_file (struct hotplug_slot *slot)
+static int has_test_file(struct pci_slot *pci_slot)
 {
+	struct hotplug_slot *slot = pci_slot->hotplug;
 	if ((!slot) || (!slot->ops))
 		return -ENODEV;
 	if (slot->ops->hardware_test)
@@ -474,7 +419,7 @@
 	return -ENOENT;
 }
 
-static int fs_add_slot (struct hotplug_slot *slot)
+static int fs_add_slot(struct pci_slot *slot)
 {
 	int retval = 0;
 
@@ -505,13 +450,6 @@
 			goto exit_adapter;
 	}
 
-	if (has_address_file(slot) == 0) {
-		retval = sysfs_create_file(&slot->kobj,
-					   &hotplug_slot_attr_address.attr);
-		if (retval)
-			goto exit_address;
-	}
-
 	if (has_max_bus_speed_file(slot) == 0) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_max_bus_speed.attr);
@@ -544,10 +482,6 @@
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
 
 exit_max_speed:
-	if (has_address_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr);
-
-exit_address:
 	if (has_adapter_file(slot) == 0)
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
 
@@ -567,7 +501,7 @@
 	return retval;
 }
 
-static void fs_remove_slot (struct hotplug_slot *slot)
+static void fs_remove_slot(struct pci_slot *slot)
 {
 	if (has_power_file(slot) == 0)
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
@@ -581,9 +515,6 @@
 	if (has_adapter_file(slot) == 0)
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
 
-	if (has_address_file(slot) == 0)
-		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr);
-
 	if (has_max_bus_speed_file(slot) == 0)
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
 
@@ -599,27 +530,33 @@
 	struct hotplug_slot *slot;
 	struct list_head *tmp;
 
+	spin_lock(&pci_hotplug_slot_list_lock);
 	list_for_each (tmp, &pci_hotplug_slot_list) {
 		slot = list_entry (tmp, struct hotplug_slot, slot_list);
 		if (strcmp(slot->name, name) == 0)
-			return slot;
+			goto out;
 	}
-	return NULL;
+	slot = NULL;
+out:
+	spin_unlock(&pci_hotplug_slot_list_lock);
+	return slot;
 }
 
 /**
  * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
+ * @bus: bus this slot is on
  * @slot: pointer to the &struct hotplug_slot to register
+ * @slot_nr: slot number
  *
  * Registers a hotplug slot with the pci hotplug subsystem, which will allow
  * userspace interaction to the slot.
  *
  * Returns 0 if successful, anything else for an error.
  */
-int pci_hp_register (struct hotplug_slot *slot)
+int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr)
 {
 	int result;
-	struct hotplug_slot *tmp;
+	struct pci_slot *pci_slot;
 
 	if (slot == NULL)
 		return -ENODEV;
@@ -632,57 +569,89 @@
 	}
 
 	/* Check if we have already registered a slot with the same name. */
-	tmp = get_slot_from_name(slot->name);
-	if (tmp)
+	if (get_slot_from_name(slot->name))
 		return -EEXIST;
 
-	slot->kobj.kset = pci_hotplug_slots_kset;
-	result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
-				      "%s", slot->name);
-	if (result) {
-		err("Unable to register kobject '%s'", slot->name);
-		return -EINVAL;
+	/*
+	 * No problems if we call this interface from both ACPI_PCI_SLOT
+	 * driver and call it here again. If we've already created the
+	 * pci_slot, the interface will simply bump the refcount.
+	 */
+	pci_slot = pci_create_slot(bus, slot_nr, slot->name);
+	if (IS_ERR(pci_slot))
+		return PTR_ERR(pci_slot);
+
+	if (pci_slot->hotplug) {
+		dbg("%s: already claimed\n", __func__);
+		pci_destroy_slot(pci_slot);
+		return -EBUSY;
 	}
 
-	list_add (&slot->slot_list, &pci_hotplug_slot_list);
+	slot->pci_slot = pci_slot;
+	pci_slot->hotplug = slot;
 
-	result = fs_add_slot (slot);
-	kobject_uevent(&slot->kobj, KOBJ_ADD);
-	dbg ("Added slot %s to the list\n", slot->name);
+	/*
+	 * Allow pcihp drivers to override the ACPI_PCI_SLOT name.
+	 */
+	if (strcmp(kobject_name(&pci_slot->kobj), slot->name)) {
+		result = kobject_rename(&pci_slot->kobj, slot->name);
+		if (result) {
+			pci_destroy_slot(pci_slot);
+			return result;
+		}
+	}
+
+	spin_lock(&pci_hotplug_slot_list_lock);
+	list_add(&slot->slot_list, &pci_hotplug_slot_list);
+	spin_unlock(&pci_hotplug_slot_list_lock);
+
+	result = fs_add_slot(pci_slot);
+	kobject_uevent(&pci_slot->kobj, KOBJ_ADD);
+	dbg("Added slot %s to the list\n", slot->name);
+
+
 	return result;
 }
 
 /**
  * pci_hp_deregister - deregister a hotplug_slot with the PCI hotplug subsystem
- * @slot: pointer to the &struct hotplug_slot to deregister
+ * @hotplug: pointer to the &struct hotplug_slot to deregister
  *
  * The @slot must have been registered with the pci hotplug subsystem
  * previously with a call to pci_hp_register().
  *
  * Returns 0 if successful, anything else for an error.
  */
-int pci_hp_deregister (struct hotplug_slot *slot)
+int pci_hp_deregister(struct hotplug_slot *hotplug)
 {
 	struct hotplug_slot *temp;
+	struct pci_slot *slot;
 
-	if (slot == NULL)
+	if (!hotplug)
 		return -ENODEV;
 
-	temp = get_slot_from_name (slot->name);
-	if (temp != slot) {
+	temp = get_slot_from_name(hotplug->name);
+	if (temp != hotplug)
 		return -ENODEV;
-	}
-	list_del (&slot->slot_list);
 
-	fs_remove_slot (slot);
-	dbg ("Removed slot %s from the list\n", slot->name);
-	kobject_put(&slot->kobj);
+	spin_lock(&pci_hotplug_slot_list_lock);
+	list_del(&hotplug->slot_list);
+	spin_unlock(&pci_hotplug_slot_list_lock);
+
+	slot = hotplug->pci_slot;
+	fs_remove_slot(slot);
+	dbg("Removed slot %s from the list\n", hotplug->name);
+
+	hotplug->release(hotplug);
+	slot->hotplug = NULL;
+	pci_destroy_slot(slot);
+
 	return 0;
 }
 
 /**
  * pci_hp_change_slot_info - changes the slot's information structure in the core
- * @slot: pointer to the slot whose info has changed
+ * @hotplug: pointer to the slot whose info has changed
  * @info: pointer to the info copy into the slot's info structure
  *
  * @slot must have been registered with the pci 
@@ -690,13 +659,15 @@
  *
  * Returns 0 if successful, anything else for an error.
  */
-int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
+int __must_check pci_hp_change_slot_info(struct hotplug_slot *hotplug,
 					 struct hotplug_slot_info *info)
 {
-	if ((slot == NULL) || (info == NULL))
+	struct pci_slot *slot;
+	if (!hotplug || !info)
 		return -ENODEV;
+	slot = hotplug->pci_slot;
 
-	memcpy (slot->info, info, sizeof (struct hotplug_slot_info));
+	memcpy(hotplug->info, info, sizeof(struct hotplug_slot_info));
 
 	return 0;
 }
@@ -704,36 +675,22 @@
 static int __init pci_hotplug_init (void)
 {
 	int result;
-	struct kset *pci_bus_kset;
 
-	pci_bus_kset = bus_get_kset(&pci_bus_type);
-
-	pci_hotplug_slots_kset = kset_create_and_add("slots", NULL,
-						     &pci_bus_kset->kobj);
-	if (!pci_hotplug_slots_kset) {
-		result = -ENOMEM;
-		err("Register subsys error\n");
-		goto exit;
-	}
 	result = cpci_hotplug_init(debug);
 	if (result) {
 		err ("cpci_hotplug_init with error %d\n", result);
-		goto err_subsys;
+		goto err_cpci;
 	}
 
 	info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
-	goto exit;
 
-err_subsys:
-	kset_unregister(pci_hotplug_slots_kset);
-exit:
+err_cpci:
 	return result;
 }
 
 static void __exit pci_hotplug_exit (void)
 {
 	cpci_hotplug_exit();
-	kset_unregister(pci_hotplug_slots_kset);
 }
 
 module_init(pci_hotplug_init);
@@ -745,7 +702,6 @@
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 
-EXPORT_SYMBOL_GPL(pci_hotplug_slots_kset);
 EXPORT_SYMBOL_GPL(pci_hp_register);
 EXPORT_SYMBOL_GPL(pci_hp_deregister);
 EXPORT_SYMBOL_GPL(pci_hp_change_slot_info);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 79c9dda..e3a1e7e 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -43,6 +43,7 @@
 extern int pciehp_poll_time;
 extern int pciehp_debug;
 extern int pciehp_force;
+extern int pciehp_slot_with_bus;
 extern struct workqueue_struct *pciehp_wq;
 
 #define dbg(format, arg...)						\
@@ -96,7 +97,7 @@
 	u32 slot_cap;
 	u8 cap_base;
 	struct timer_list poll_timer;
-	volatile int cmd_busy;
+	int cmd_busy;
 	unsigned int no_cmd_complete:1;
 };
 
@@ -156,10 +157,10 @@
 extern int pciehp_configure_device(struct slot *p_slot);
 extern int pciehp_unconfigure_device(struct slot *p_slot);
 extern void pciehp_queue_pushbutton_work(struct work_struct *work);
-int pcie_init(struct controller *ctrl, struct pcie_device *dev);
+struct controller *pcie_init(struct pcie_device *dev);
 int pciehp_enable_slot(struct slot *p_slot);
 int pciehp_disable_slot(struct slot *p_slot);
-int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev);
+int pcie_enable_notification(struct controller *ctrl);
 
 static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
 {
@@ -202,8 +203,13 @@
 #include <acpi/actypes.h>
 #include <linux/pci-acpi.h>
 
-#define pciehp_get_hp_hw_control_from_firmware(dev)			\
-	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+	u32 flags = (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
+		     OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+	return acpi_get_hp_hw_control_from_firmware(dev, flags);
+}
+
 static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
 			struct hotplug_params *hpp)
 {
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 48a2ed3..3677495 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -72,7 +72,6 @@
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_address		(struct hotplug_slot *slot, u32 *value);
 static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
@@ -85,7 +84,6 @@
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_address =		get_address,
   	.get_max_bus_speed =	get_max_bus_speed,
   	.get_cur_bus_speed =	get_cur_bus_speed,
 };
@@ -185,23 +183,10 @@
  */
 static void release_slot(struct hotplug_slot *hotplug_slot)
 {
-	struct slot *slot = hotplug_slot->private;
-
 	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
 
-	kfree(slot->hotplug_slot->info);
-	kfree(slot->hotplug_slot);
-	kfree(slot);
-}
-
-static void make_slot_name(struct slot *slot)
-{
-	if (pciehp_slot_with_bus)
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
-			 slot->number);
+	kfree(hotplug_slot->info);
+	kfree(hotplug_slot);
 }
 
 static int init_slots(struct controller *ctrl)
@@ -210,49 +195,34 @@
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
 	int retval = -ENOMEM;
-	int i;
 
-	for (i = 0; i < ctrl->num_slots; i++) {
-		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
-		if (!slot)
-			goto error;
-
+	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
 		hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
 		if (!hotplug_slot)
-			goto error_slot;
-		slot->hotplug_slot = hotplug_slot;
+			goto error;
 
 		info = kzalloc(sizeof(*info), GFP_KERNEL);
 		if (!info)
 			goto error_hpslot;
-		hotplug_slot->info = info;
-
-		hotplug_slot->name = slot->name;
-
-		slot->hp_slot = i;
-		slot->ctrl = ctrl;
-		slot->bus = ctrl->pci_dev->subordinate->number;
-		slot->device = ctrl->slot_device_offset + i;
-		slot->hpc_ops = ctrl->hpc_ops;
-		slot->number = ctrl->first_slot;
-		mutex_init(&slot->lock);
-		INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
 
 		/* register this slot with the hotplug pci core */
+		hotplug_slot->info = info;
+		hotplug_slot->name = slot->name;
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
-		make_slot_name(slot);
 		hotplug_slot->ops = &pciehp_hotplug_slot_ops;
-
 		get_power_status(hotplug_slot, &info->power_status);
 		get_attention_status(hotplug_slot, &info->attention_status);
 		get_latch_status(hotplug_slot, &info->latch_status);
 		get_adapter_status(hotplug_slot, &info->adapter_status);
+		slot->hotplug_slot = hotplug_slot;
 
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
-		retval = pci_hp_register(hotplug_slot);
+		retval = pci_hp_register(hotplug_slot,
+					 ctrl->pci_dev->subordinate,
+					 slot->device);
 		if (retval) {
 			err("pci_hp_register failed with error %d\n", retval);
 			if (retval == -EEXIST)
@@ -263,7 +233,7 @@
 		}
 		/* create additional sysfs entries */
 		if (EMI(ctrl)) {
-			retval = sysfs_create_file(&hotplug_slot->kobj,
+			retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj,
 				&hotplug_slot_attr_lock.attr);
 			if (retval) {
 				pci_hp_deregister(hotplug_slot);
@@ -271,8 +241,6 @@
 				goto error_info;
 			}
 		}
-
-		list_add(&slot->slot_list, &ctrl->slot_list);
 	}
 
 	return 0;
@@ -280,27 +248,18 @@
 	kfree(info);
 error_hpslot:
 	kfree(hotplug_slot);
-error_slot:
-	kfree(slot);
 error:
 	return retval;
 }
 
 static void cleanup_slots(struct controller *ctrl)
 {
-	struct list_head *tmp;
-	struct list_head *next;
 	struct slot *slot;
 
-	list_for_each_safe(tmp, next, &ctrl->slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
-		list_del(&slot->slot_list);
+	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
 		if (EMI(ctrl))
-			sysfs_remove_file(&slot->hotplug_slot->kobj,
+			sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj,
 				&hotplug_slot_attr_lock.attr);
-		cancel_delayed_work(&slot->work);
-		flush_scheduled_work();
-		flush_workqueue(pciehp_wq);
 		pci_hp_deregister(slot->hotplug_slot);
 	}
 }
@@ -398,19 +357,8 @@
 	return 0;
 }
 
-static int get_address(struct hotplug_slot *hotplug_slot, u32 *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
-
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
-	*value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device;
-
-	return 0;
-}
-
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
+				enum pci_bus_speed *value)
 {
 	struct slot *slot = hotplug_slot->private;
 	int retval;
@@ -444,34 +392,30 @@
 	struct controller *ctrl;
 	struct slot *t_slot;
 	u8 value;
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = dev->port;
 
-	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+	if (pciehp_force)
+		dbg("Bypassing BIOS check for pciehp use on %s\n",
+		    pci_name(pdev));
+	else if (pciehp_get_hp_hw_control_from_firmware(pdev))
+		goto err_out_none;
+
+	ctrl = pcie_init(dev);
 	if (!ctrl) {
-		err("%s : out of memory\n", __func__);
+		dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME);
 		goto err_out_none;
 	}
-	INIT_LIST_HEAD(&ctrl->slot_list);
-
-	pdev = dev->port;
-	ctrl->pci_dev = pdev;
-
-	rc = pcie_init(ctrl, dev);
-	if (rc) {
-		dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME);
-		goto err_out_free_ctrl;
-	}
-
-	pci_set_drvdata(pdev, ctrl);
-
-	dbg("%s: ctrl bus=0x%x, device=%x, function=%x, irq=%x\n",
-	    __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
-	    PCI_FUNC(pdev->devfn), pdev->irq);
+	set_service_data(dev, ctrl);
 
 	/* Setup the slot information structures */
 	rc = init_slots(ctrl);
 	if (rc) {
-		err("%s: slot initialization failed\n", PCIE_MODULE_NAME);
+		if (rc == -EBUSY)
+			warn("%s: slot already registered by another "
+				"hotplug driver\n", PCIE_MODULE_NAME);
+		else
+			err("%s: slot initialization failed\n",
+				PCIE_MODULE_NAME);
 		goto err_out_release_ctlr;
 	}
 
@@ -495,20 +439,16 @@
 	cleanup_slots(ctrl);
 err_out_release_ctlr:
 	ctrl->hpc_ops->release_ctlr(ctrl);
-err_out_free_ctrl:
-	kfree(ctrl);
 err_out_none:
 	return -ENODEV;
 }
 
 static void pciehp_remove (struct pcie_device *dev)
 {
-	struct pci_dev *pdev = dev->port;
-	struct controller *ctrl = pci_get_drvdata(pdev);
+	struct controller *ctrl = get_service_data(dev);
 
 	cleanup_slots(ctrl);
 	ctrl->hpc_ops->release_ctlr(ctrl);
-	kfree(ctrl);
 }
 
 #ifdef CONFIG_PM
@@ -522,13 +462,12 @@
 {
 	printk("%s ENTRY\n", __func__);
 	if (pciehp_force) {
-		struct pci_dev *pdev = dev->port;
-		struct controller *ctrl = pci_get_drvdata(pdev);
+		struct controller *ctrl = get_service_data(dev);
 		struct slot *t_slot;
 		u8 status;
 
 		/* reinitialize the chipset's event detection logic */
-		pcie_init_hardware_part2(ctrl, dev);
+		pcie_enable_notification(ctrl);
 
 		t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
 
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 79f1049..1323a43 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,30 +247,32 @@
 		free_irq(ctrl->pci_dev->irq, ctrl);
 }
 
-static inline int pcie_poll_cmd(struct controller *ctrl)
+static int pcie_poll_cmd(struct controller *ctrl)
 {
 	u16 slot_status;
 	int timeout = 1000;
 
-	if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
-		if (slot_status & CMD_COMPLETED)
-			goto completed;
-	for (timeout = 1000; timeout > 0; timeout -= 100) {
-		msleep(100);
-		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
-			if (slot_status & CMD_COMPLETED)
-				goto completed;
+	if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
+		if (slot_status & CMD_COMPLETED) {
+			pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+			return 1;
+		}
+	}
+	while (timeout > 1000) {
+		msleep(10);
+		timeout -= 10;
+		if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
+			if (slot_status & CMD_COMPLETED) {
+				pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+				return 1;
+			}
+		}
 	}
 	return 0;	/* timeout */
-
-completed:
-	pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
-	return timeout;
 }
 
-static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
+static void pcie_wait_cmd(struct controller *ctrl, int poll)
 {
-	int retval = 0;
 	unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
 	unsigned long timeout = msecs_to_jiffies(msecs);
 	int rc;
@@ -278,16 +280,9 @@
 	if (poll)
 		rc = pcie_poll_cmd(ctrl);
 	else
-		rc = wait_event_interruptible_timeout(ctrl->queue,
-					      !ctrl->cmd_busy, timeout);
+		rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
 	if (!rc)
 		dbg("Command not completed in 1000 msec\n");
-	else if (rc < 0) {
-		retval = -EINTR;
-		info("Command was interrupted by a signal\n");
-	}
-
-	return retval;
 }
 
 /**
@@ -342,10 +337,6 @@
 
 	slot_ctrl &= ~mask;
 	slot_ctrl |= (cmd & mask);
-	/* Don't enable command completed if caller is changing it. */
-	if (!(mask & CMD_CMPL_INTR_ENABLE))
-		slot_ctrl |= CMD_CMPL_INTR_ENABLE;
-
 	ctrl->cmd_busy = 1;
 	smp_mb();
 	retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
@@ -365,7 +356,7 @@
 		if (!(slot_ctrl & HP_INTR_ENABLE) ||
 		    !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
 			poll = 1;
-                retval = pcie_wait_cmd(ctrl, poll);
+                pcie_wait_cmd(ctrl, poll);
 	}
  out:
 	mutex_unlock(&ctrl->ctrl_lock);
@@ -614,23 +605,6 @@
 	    __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
 }
 
-static void hpc_release_ctlr(struct controller *ctrl)
-{
-	/* Mask Hot-plug Interrupt Enable */
-	if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE))
-		err("%s: Cannot mask hotplut interrupt enable\n", __func__);
-
-	/* Free interrupt handler or interrupt polling timer */
-	pciehp_free_irq(ctrl);
-
-	/*
-	 * If this is the last controller to be released, destroy the
-	 * pciehp work queue
-	 */
-	if (atomic_dec_and_test(&pciehp_num_controllers))
-		destroy_workqueue(pciehp_wq);
-}
-
 static int hpc_power_on_slot(struct slot * slot)
 {
 	struct controller *ctrl = slot->ctrl;
@@ -785,7 +759,7 @@
 		intr_loc |= detected;
 		if (!intr_loc)
 			return IRQ_NONE;
-		if (pciehp_writew(ctrl, SLOTSTATUS, detected)) {
+		if (detected && pciehp_writew(ctrl, SLOTSTATUS, detected)) {
 			err("%s: Cannot write to SLOTSTATUS\n", __func__);
 			return IRQ_NONE;
 		}
@@ -797,25 +771,13 @@
 	if (intr_loc & CMD_COMPLETED) {
 		ctrl->cmd_busy = 0;
 		smp_mb();
-		wake_up_interruptible(&ctrl->queue);
+		wake_up(&ctrl->queue);
 	}
 
 	if (!(intr_loc & ~CMD_COMPLETED))
 		return IRQ_HANDLED;
 
-	/*
-	 * Return without handling events if this handler routine is
-	 * called before controller initialization is done. This may
-	 * happen if hotplug event or another interrupt that shares
-	 * the IRQ with pciehp arrives before slot initialization is
-	 * done after interrupt handler is registered.
-	 *
-	 * FIXME - Need more structural fixes. We need to be ready to
-	 * handle the event before installing interrupt handler.
-	 */
 	p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-	if (!p_slot || !p_slot->hpc_ops)
-		return IRQ_HANDLED;
 
 	/* Check MRL Sensor Changed */
 	if (intr_loc & MRL_SENS_CHANGED)
@@ -992,6 +954,7 @@
 	return retval;
 }
 
+static void pcie_release_ctrl(struct controller *ctrl);
 static struct hpc_ops pciehp_hpc_ops = {
 	.power_on_slot			= hpc_power_on_slot,
 	.power_off_slot			= hpc_power_off_slot,
@@ -1013,97 +976,11 @@
 	.green_led_off			= hpc_set_green_led_off,
 	.green_led_blink		= hpc_set_green_led_blink,
 
-	.release_ctlr			= hpc_release_ctlr,
+	.release_ctlr			= pcie_release_ctrl,
 	.check_lnk_status		= hpc_check_lnk_status,
 };
 
-#ifdef CONFIG_ACPI
-static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	acpi_status status;
-	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
-	struct pci_dev *pdev = dev;
-	struct pci_bus *parent;
-	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
-
-	/*
-	 * Per PCI firmware specification, we should run the ACPI _OSC
-	 * method to get control of hotplug hardware before using it.
-	 * If an _OSC is missing, we look for an OSHP to do the same thing.
-	 * To handle different BIOS behavior, we look for _OSC and OSHP
-	 * within the scope of the hotplug controller and its parents, upto
-	 * the host bridge under which this controller exists.
-	 */
-	while (!handle) {
-		/*
-		 * This hotplug controller was not listed in the ACPI name
-		 * space at all. Try to get acpi handle of parent pci bus.
-		 */
-		if (!pdev || !pdev->bus->parent)
-			break;
-		parent = pdev->bus->parent;
-		dbg("Could not find %s in acpi namespace, trying parent\n",
-				pci_name(pdev));
-		if (!parent->self)
-			/* Parent must be a host bridge */
-			handle = acpi_get_pci_rootbridge_handle(
-					pci_domain_nr(parent),
-					parent->number);
-		else
-			handle = DEVICE_ACPI_HANDLE(
-					&(parent->self->dev));
-		pdev = parent->self;
-	}
-
-	while (handle) {
-		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
-		dbg("Trying to get hotplug control for %s \n",
-			(char *)string.pointer);
-		status = pci_osc_control_set(handle,
-				OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL |
-				OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
-		if (status == AE_NOT_FOUND)
-			status = acpi_run_oshp(handle);
-		if (ACPI_SUCCESS(status)) {
-			dbg("Gained control for hotplug HW for pci %s (%s)\n",
-				pci_name(dev), (char *)string.pointer);
-			kfree(string.pointer);
-			return 0;
-		}
-		if (acpi_root_bridge(handle))
-			break;
-		chandle = handle;
-		status = acpi_get_parent(chandle, &handle);
-		if (ACPI_FAILURE(status))
-			break;
-	}
-
-	dbg("Cannot get control of hotplug hardware for pci %s\n",
-			pci_name(dev));
-
-	kfree(string.pointer);
-	return -1;
-}
-#endif
-
-static int pcie_init_hardware_part1(struct controller *ctrl,
-				    struct pcie_device *dev)
-{
-	/* Clear all remaining event bits in Slot Status register */
-	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
-		err("%s: Cannot write to SLOTSTATUS register\n", __func__);
-		return -1;
-	}
-
-	/* Mask Hot-plug Interrupt Enable */
-	if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
-		err("%s: Cannot mask hotplug interrupt enable\n", __func__);
-		return -1;
-	}
-	return 0;
-}
-
-int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
+int pcie_enable_notification(struct controller *ctrl)
 {
 	u16 cmd, mask;
 
@@ -1115,30 +992,83 @@
 	if (MRL_SENS(ctrl))
 		cmd |= MRL_DETECT_ENABLE;
 	if (!pciehp_poll_mode)
-		cmd |= HP_INTR_ENABLE;
+		cmd |= HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
 
-	mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE |
-		PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE;
+	mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE |
+	       PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
 
 	if (pcie_write_cmd(ctrl, cmd, mask)) {
 		err("%s: Cannot enable software notification\n", __func__);
-		goto abort;
+		return -1;
 	}
-
-	if (pciehp_force)
-		dbg("Bypassing BIOS check for pciehp use on %s\n",
-				pci_name(ctrl->pci_dev));
-	else if (pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev))
-		goto abort_disable_intr;
-
 	return 0;
+}
 
-	/* We end up here for the many possible ways to fail this API. */
-abort_disable_intr:
-	if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE))
-		err("%s : disabling interrupts failed\n", __func__);
-abort:
-	return -1;
+static void pcie_disable_notification(struct controller *ctrl)
+{
+	u16 mask;
+	mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE |
+	       PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE;
+	if (pcie_write_cmd(ctrl, 0, mask))
+		warn("%s: Cannot disable software notification\n", __func__);
+}
+
+static int pcie_init_notification(struct controller *ctrl)
+{
+	if (pciehp_request_irq(ctrl))
+		return -1;
+	if (pcie_enable_notification(ctrl)) {
+		pciehp_free_irq(ctrl);
+		return -1;
+	}
+	return 0;
+}
+
+static void pcie_shutdown_notification(struct controller *ctrl)
+{
+	pcie_disable_notification(ctrl);
+	pciehp_free_irq(ctrl);
+}
+
+static void make_slot_name(struct slot *slot)
+{
+	if (pciehp_slot_with_bus)
+		snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d",
+			 slot->bus, slot->number);
+	else
+		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
+}
+
+static int pcie_init_slot(struct controller *ctrl)
+{
+	struct slot *slot;
+
+	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+	if (!slot)
+		return -ENOMEM;
+
+	slot->hp_slot = 0;
+	slot->ctrl = ctrl;
+	slot->bus = ctrl->pci_dev->subordinate->number;
+	slot->device = ctrl->slot_device_offset + slot->hp_slot;
+	slot->hpc_ops = ctrl->hpc_ops;
+	slot->number = ctrl->first_slot;
+	make_slot_name(slot);
+	mutex_init(&slot->lock);
+	INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
+	list_add(&slot->slot_list, &ctrl->slot_list);
+	return 0;
+}
+
+static void pcie_cleanup_slot(struct controller *ctrl)
+{
+	struct slot *slot;
+	slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list);
+	list_del(&slot->slot_list);
+	cancel_delayed_work(&slot->work);
+	flush_scheduled_work();
+	flush_workqueue(pciehp_wq);
+	kfree(slot);
 }
 
 static inline void dbg_ctrl(struct controller *ctrl)
@@ -1176,15 +1106,23 @@
 	dbg("  Comamnd Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
 	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
 	dbg("Slot Status            : 0x%04x\n", reg16);
-	pciehp_readw(ctrl, SLOTSTATUS, &reg16);
+	pciehp_readw(ctrl, SLOTCTRL, &reg16);
 	dbg("Slot Control           : 0x%04x\n", reg16);
 }
 
-int pcie_init(struct controller *ctrl, struct pcie_device *dev)
+struct controller *pcie_init(struct pcie_device *dev)
 {
+	struct controller *ctrl;
 	u32 slot_cap;
 	struct pci_dev *pdev = dev->port;
 
+	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl) {
+		err("%s : out of memory\n", __func__);
+		goto abort;
+	}
+	INIT_LIST_HEAD(&ctrl->slot_list);
+
 	ctrl->pci_dev = pdev;
 	ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!ctrl->cap_base) {
@@ -1215,15 +1153,12 @@
 	    !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
 	    ctrl->no_cmd_complete = 1;
 
-	info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
-	     pdev->vendor, pdev->device,
-	     pdev->subsystem_vendor, pdev->subsystem_device);
+	/* Clear all remaining event bits in Slot Status register */
+	if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f))
+		goto abort_ctrl;
 
-	if (pcie_init_hardware_part1(ctrl, dev))
-		goto abort;
-
-	if (pciehp_request_irq(ctrl))
-		goto abort;
+	/* Disable sotfware notification */
+	pcie_disable_notification(ctrl);
 
 	/*
 	 * If this is the first controller to be initialized,
@@ -1231,18 +1166,39 @@
 	 */
 	if (atomic_add_return(1, &pciehp_num_controllers) == 1) {
 		pciehp_wq = create_singlethread_workqueue("pciehpd");
-		if (!pciehp_wq) {
-			goto abort_free_irq;
-		}
+		if (!pciehp_wq)
+			goto abort_ctrl;
 	}
 
-	if (pcie_init_hardware_part2(ctrl, dev))
-		goto abort_free_irq;
+	info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
+	     pdev->vendor, pdev->device,
+	     pdev->subsystem_vendor, pdev->subsystem_device);
 
-	return 0;
+	if (pcie_init_slot(ctrl))
+		goto abort_ctrl;
 
-abort_free_irq:
-	pciehp_free_irq(ctrl);
+	if (pcie_init_notification(ctrl))
+		goto abort_slot;
+
+	return ctrl;
+
+abort_slot:
+	pcie_cleanup_slot(ctrl);
+abort_ctrl:
+	kfree(ctrl);
 abort:
-	return -1;
+	return NULL;
+}
+
+void pcie_release_ctrl(struct controller *ctrl)
+{
+	pcie_shutdown_notification(ctrl);
+	pcie_cleanup_slot(ctrl);
+	/*
+	 * If this is the last controller to be released, destroy the
+	 * pciehp work queue
+	 */
+	if (atomic_dec_and_test(&pciehp_num_controllers))
+		destroy_workqueue(pciehp_wq);
+	kfree(ctrl);
 }
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index 779c5db..a796301 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -14,8 +14,10 @@
  */
 #include <linux/kobject.h>
 #include <linux/string.h>
+#include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include "rpadlpar.h"
+#include "../pci.h"
 
 #define DLPAR_KOBJ_NAME       "control"
 
@@ -27,7 +29,6 @@
 
 #define MAX_DRC_NAME_LEN 64
 
-
 static ssize_t add_slot_store(struct kobject *kobj, struct kobj_attribute *attr,
 			      const char *buf, size_t nbytes)
 {
@@ -112,7 +113,7 @@
 	int error;
 
 	dlpar_kobj = kobject_create_and_add(DLPAR_KOBJ_NAME,
-					    &pci_hotplug_slots_kset->kobj);
+					    &pci_slots_kset->kobj);
 	if (!dlpar_kobj)
 		return -EINVAL;
 
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 56197b6..9b714ea 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -33,33 +33,6 @@
 #include <asm/rtas.h>
 #include "rpaphp.h"
 
-static ssize_t address_read_file (struct hotplug_slot *php_slot, char *buf)
-{
-	int retval;
-	struct slot *slot = (struct slot *)php_slot->private;
-	struct pci_bus *bus;
-
-	if (!slot)
-		return -ENOENT;
-
-	bus = slot->bus;
-	if (!bus)
-		return -ENOENT;
-
-	if (bus->self)
-		retval = sprintf(buf, pci_name(bus->self));
-	else
-		retval = sprintf(buf, "%04x:%02x:00.0",
-		        pci_domain_nr(bus), bus->number);
-
-	return retval;
-}
-
-static struct hotplug_slot_attribute php_attr_address = {
-	.attr = {.name = "address", .mode = S_IFREG | S_IRUGO},
-	.show = address_read_file,
-};
-
 /* free up the memory used by a slot */
 static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
 {
@@ -135,9 +108,6 @@
 
 	list_del(&slot->rpaphp_slot_list);
 	
-	/* remove "address" file */
-	sysfs_remove_file(&php_slot->kobj, &php_attr_address.attr);
-
 	retval = pci_hp_deregister(php_slot);
 	if (retval)
 		err("Problem unregistering a slot %s\n", slot->name);
@@ -151,6 +121,7 @@
 {
 	struct hotplug_slot *php_slot = slot->hotplug_slot;
 	int retval;
+	int slotno;
 
 	dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n", 
 		__func__, slot->dn->full_name, slot->index, slot->name,
@@ -162,19 +133,16 @@
 		return -EAGAIN;
 	}	
 
-	retval = pci_hp_register(php_slot);
+	if (slot->dn->child)
+		slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
+	else
+		slotno = -1;
+	retval = pci_hp_register(php_slot, slot->bus, slotno);
 	if (retval) {
 		err("pci_hp_register failed with error %d\n", retval);
 		return retval;
 	}
 
-	/* create "address" file */
-	retval = sysfs_create_file(&php_slot->kobj, &php_attr_address.attr);
-	if (retval) {
-		err("sysfs_create_file failed with error %d\n", retval);
-		goto sysfs_fail;
-	}
-
 	/* add slot to our internal list */
 	list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
 	info("Slot [%s] registered\n", slot->name);
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 2fe37cd..410fe03 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -197,13 +197,15 @@
 static struct hotplug_slot * sn_hp_destroy(void)
 {
 	struct slot *slot;
+	struct pci_slot *pci_slot;
 	struct hotplug_slot *bss_hotplug_slot = NULL;
 
 	list_for_each_entry(slot, &sn_hp_list, hp_list) {
 		bss_hotplug_slot = slot->hotplug_slot;
+		pci_slot = bss_hotplug_slot->pci_slot;
 		list_del(&((struct slot *)bss_hotplug_slot->private)->
 			 hp_list);
-		sysfs_remove_file(&bss_hotplug_slot->kobj,
+		sysfs_remove_file(&pci_slot->kobj,
 				  &sn_slot_path_attr.attr);
 		break;
 	}
@@ -614,6 +616,7 @@
 static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
 {
 	int device;
+	struct pci_slot *pci_slot;
 	struct hotplug_slot *bss_hotplug_slot;
 	int rc = 0;
 
@@ -650,11 +653,12 @@
 		bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
 		bss_hotplug_slot->release = &sn_release_slot;
 
-		rc = pci_hp_register(bss_hotplug_slot);
+		rc = pci_hp_register(bss_hotplug_slot, pci_bus, device);
 		if (rc)
 			goto register_err;
 
-		rc = sysfs_create_file(&bss_hotplug_slot->kobj,
+		pci_slot = bss_hotplug_slot->pci_slot;
+		rc = sysfs_create_file(&pci_slot->kobj,
 				       &sn_slot_path_attr.attr);
 		if (rc)
 			goto register_err;
@@ -664,7 +668,7 @@
 
 register_err:
 	dev_dbg(&pci_bus->self->dev, "bus failed to register with err = %d\n",
-	        rc);
+		rc);
 
 alloc_err:
 	if (rc == -ENOMEM)
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index f66e8d6..8a026f7 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -170,6 +170,7 @@
 extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
 
 #ifdef CONFIG_ACPI
+#include <linux/pci-acpi.h>
 static inline int get_hp_params_from_firmware(struct pci_dev *dev,
 					      struct hotplug_params *hpp)
 {
@@ -177,14 +178,15 @@
 			return -ENODEV;
 	return 0;
 }
-#define get_hp_hw_control_from_firmware(pdev)				\
-	do {								\
-		if (DEVICE_ACPI_HANDLE(&(pdev->dev)))			\
-			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev)));\
-	} while (0)
+
+static inline int get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+	u32 flags = OSC_SHPC_NATIVE_HP_CONTROL;
+	return acpi_get_hp_hw_control_from_firmware(dev, flags);
+}
 #else
 #define get_hp_params_from_firmware(dev, hpp) (-ENODEV)
-#define get_hp_hw_control_from_firmware(dev) do { } while (0)
+#define get_hp_hw_control_from_firmware(dev) (0)
 #endif
 
 struct ctrl_reg {
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 9784865..a8cbd03 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -39,7 +39,7 @@
 int shpchp_debug;
 int shpchp_poll_mode;
 int shpchp_poll_time;
-int shpchp_slot_with_bus;
+static int shpchp_slot_with_bus;
 struct workqueue_struct *shpchp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -68,7 +68,6 @@
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_address		(struct hotplug_slot *slot, u32 *value);
 static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
@@ -81,7 +80,6 @@
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_address =		get_address,
 	.get_max_bus_speed =	get_max_bus_speed,
 	.get_cur_bus_speed =	get_cur_bus_speed,
 };
@@ -159,7 +157,8 @@
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
-		retval = pci_hp_register(slot->hotplug_slot);
+		retval = pci_hp_register(slot->hotplug_slot,
+				ctrl->pci_dev->subordinate, slot->device);
 		if (retval) {
 			err("pci_hp_register failed with error %d\n", retval);
 			if (retval == -EEXIST)
@@ -288,19 +287,8 @@
 	return 0;
 }
 
-static int get_address (struct hotplug_slot *hotplug_slot, u32 *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	struct pci_bus *bus = slot->ctrl->pci_dev->subordinate;
-
-	dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name);
-
-	*value = (pci_domain_nr(bus) << 16) | (slot->bus << 8) | slot->device;
-
-	return 0;
-}
-
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
+				enum pci_bus_speed *value)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
@@ -330,13 +318,14 @@
 
 static int is_shpc_capable(struct pci_dev *dev)
 {
-       if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
-                               PCI_DEVICE_ID_AMD_GOLAM_7450))
-               return 1;
-       if (pci_find_capability(dev, PCI_CAP_ID_SHPC))
-               return 1;
-
-       return 0;
+	if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
+						PCI_DEVICE_ID_AMD_GOLAM_7450))
+		return 1;
+	if (!pci_find_capability(dev, PCI_CAP_ID_SHPC))
+		return 0;
+	if (get_hp_hw_control_from_firmware(dev))
+		return 0;
+	return 1;
 }
 
 static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 7d770b2..7a0bff3 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -1084,7 +1084,6 @@
 	dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__,
 			pdev->bus->number, PCI_SLOT(pdev->devfn),
 			PCI_FUNC(pdev->devfn), pdev->irq);
-	get_hp_hw_control_from_firmware(pdev);
 
 	/*
 	 * If this is the first controller to be initialized,
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index bb06423..3f7b81c 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1748,7 +1748,6 @@
 	deferred_flush = kzalloc(g_num_of_iommus *
 		sizeof(struct deferred_flush_tables), GFP_KERNEL);
 	if (!deferred_flush) {
-		kfree(g_iommus);
 		ret = -ENOMEM;
 		goto error;
 	}
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 8c61304c..15af618 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -70,12 +70,10 @@
 	}
 }
 
-static void msi_set_enable(struct pci_dev *dev, int enable)
+static void __msi_set_enable(struct pci_dev *dev, int pos, int enable)
 {
-	int pos;
 	u16 control;
 
-	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
 	if (pos) {
 		pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
 		control &= ~PCI_MSI_FLAGS_ENABLE;
@@ -85,6 +83,11 @@
 	}
 }
 
+static void msi_set_enable(struct pci_dev *dev, int enable)
+{
+	__msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable);
+}
+
 static void msix_set_enable(struct pci_dev *dev, int enable)
 {
 	int pos;
@@ -141,7 +144,8 @@
 			mask_bits |= flag & mask;
 			pci_write_config_dword(entry->dev, pos, mask_bits);
 		} else {
-			msi_set_enable(entry->dev, !flag);
+			__msi_set_enable(entry->dev, entry->msi_attrib.pos,
+					 !flag);
 		}
 		break;
 	case PCI_CAP_ID_MSIX:
@@ -561,9 +565,8 @@
 
 	/* Check whether driver already requested for MSI-X irqs */
 	if (dev->msix_enabled) {
-		printk(KERN_INFO "PCI: %s: Can't enable MSI.  "
-			"Device already has MSI-X enabled\n",
-			pci_name(dev));
+		dev_info(&dev->dev, "can't enable MSI "
+			 "(MSI-X already enabled)\n");
 		return -EINVAL;
 	}
 	status = msi_capability_init(dev);
@@ -686,9 +689,8 @@
 
 	/* Check whether driver already requested for MSI irq */
    	if (dev->msi_enabled) {
-		printk(KERN_INFO "PCI: %s: Can't enable MSI-X.  "
-		       "Device already has an MSI irq assigned\n",
-		       pci_name(dev));
+		dev_info(&dev->dev, "can't enable MSI-X "
+		       "(MSI IRQ already assigned)\n");
 		return -EINVAL;
 	}
 	status = msix_capability_init(dev, entries, nvec);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index dab9d47..7764768b 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -21,12 +21,19 @@
 
 struct acpi_osc_data {
 	acpi_handle handle;
-	u32 ctrlset_buf[3];
-	u32 global_ctrlsets;
+	u32 support_set;
+	u32 control_set;
+	int is_queried;
+	u32 query_result;
 	struct list_head sibiling;
 };
 static LIST_HEAD(acpi_osc_data_list);
 
+struct acpi_osc_args {
+	u32 capbuf[3];
+	u32 query_result;
+};
+
 static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
 {
 	struct acpi_osc_data *data;
@@ -44,25 +51,80 @@
 	return data;
 }
 
-static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
+static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40,
+			  0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
 
-static acpi_status  
-acpi_query_osc (
-	acpi_handle	handle,
-	u32		level,
-	void		*context,
-	void		**retval )
+static acpi_status acpi_run_osc(acpi_handle handle,
+				struct acpi_osc_args *osc_args)
 {
-	acpi_status		status;
-	struct acpi_object_list	input;
-	union acpi_object 	in_params[4];
-	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
-	union acpi_object 	*out_obj;
-	u32			osc_dw0;
-	acpi_status *ret_status = (acpi_status *)retval;
+	acpi_status status;
+	struct acpi_object_list input;
+	union acpi_object in_params[4];
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *out_obj;
+	u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE];
+
+	/* Setting up input parameters */
+	input.count = 4;
+	input.pointer = in_params;
+	in_params[0].type 		= ACPI_TYPE_BUFFER;
+	in_params[0].buffer.length 	= 16;
+	in_params[0].buffer.pointer	= OSC_UUID;
+	in_params[1].type 		= ACPI_TYPE_INTEGER;
+	in_params[1].integer.value 	= 1;
+	in_params[2].type 		= ACPI_TYPE_INTEGER;
+	in_params[2].integer.value	= 3;
+	in_params[3].type		= ACPI_TYPE_BUFFER;
+	in_params[3].buffer.length 	= 12;
+	in_params[3].buffer.pointer 	= (u8 *)osc_args->capbuf;
+
+	status = acpi_evaluate_object(handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n");
+		status = AE_TYPE;
+		goto out_kfree;
+	}
+	osc_dw0 = *((u32 *)out_obj->buffer.pointer);
+	if (osc_dw0) {
+		if (osc_dw0 & OSC_REQUEST_ERROR)
+			printk(KERN_DEBUG "_OSC request fails\n"); 
+		if (osc_dw0 & OSC_INVALID_UUID_ERROR)
+			printk(KERN_DEBUG "_OSC invalid UUID\n"); 
+		if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
+			printk(KERN_DEBUG "_OSC invalid revision\n"); 
+		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
+			if (flags & OSC_QUERY_ENABLE)
+				goto out_success;
+			printk(KERN_DEBUG "_OSC FW not grant req. control\n");
+			status = AE_SUPPORT;
+			goto out_kfree;
+		}
+		status = AE_ERROR;
+		goto out_kfree;
+	}
+out_success:
+	if (flags & OSC_QUERY_ENABLE)
+		osc_args->query_result =
+			*((u32 *)(out_obj->buffer.pointer + 8));
+	status = AE_OK;
+
+out_kfree:
+	kfree(output.pointer);
+	return status;
+}
+
+static acpi_status acpi_query_osc(acpi_handle handle,
+				  u32 level, void *context, void **retval)
+{
+	acpi_status status;
 	struct acpi_osc_data *osc_data;
-	u32 flags = (unsigned long)context, temp;
+	u32 flags = (unsigned long)context, support_set;
 	acpi_handle tmp;
+	struct acpi_osc_args osc_args;
 
 	status = acpi_get_handle(handle, "_OSC", &tmp);
 	if (ACPI_FAILURE(status))
@@ -74,134 +136,19 @@
 		return AE_ERROR;
 	}
 
-	osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS);
-
 	/* do _OSC query for all possible controls */
-	temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE];
-	osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
-	osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
+	support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS);
+	osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
+	osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set;
+	osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
 
-	/* Setting up input parameters */
-	input.count = 4;
-	input.pointer = in_params;
-	in_params[0].type 		= ACPI_TYPE_BUFFER;
-	in_params[0].buffer.length 	= 16;
-	in_params[0].buffer.pointer	= OSC_UUID;
-	in_params[1].type 		= ACPI_TYPE_INTEGER;
-	in_params[1].integer.value 	= 1;
-	in_params[2].type 		= ACPI_TYPE_INTEGER;
-	in_params[2].integer.value	= 3;
-	in_params[3].type		= ACPI_TYPE_BUFFER;
-	in_params[3].buffer.length 	= 12;
-	in_params[3].buffer.pointer 	= (u8 *)osc_data->ctrlset_buf;
-
-	status = acpi_evaluate_object(handle, "_OSC", &input, &output);
-	if (ACPI_FAILURE(status))
-		goto out_nofree;
-	out_obj = output.pointer;
-
-	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		printk(KERN_DEBUG  
-			"Evaluate _OSC returns wrong type\n");
-		status = AE_TYPE;
-		goto query_osc_out;
-	}
-	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
-	if (osc_dw0) {
-		if (osc_dw0 & OSC_REQUEST_ERROR)
-			printk(KERN_DEBUG "_OSC request fails\n"); 
-		if (osc_dw0 & OSC_INVALID_UUID_ERROR)
-			printk(KERN_DEBUG "_OSC invalid UUID\n"); 
-		if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
-			printk(KERN_DEBUG "_OSC invalid revision\n"); 
-		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
-			/* Update Global Control Set */
-			osc_data->global_ctrlsets =
-				*((u32 *)(out_obj->buffer.pointer + 8));
-			status = AE_OK;
-			goto query_osc_out;
-		}
-		status = AE_ERROR;
-		goto query_osc_out;
+	status = acpi_run_osc(handle, &osc_args);
+	if (ACPI_SUCCESS(status)) {
+		osc_data->support_set = support_set;
+		osc_data->query_result = osc_args.query_result;
+		osc_data->is_queried = 1;
 	}
 
-	/* Update Global Control Set */
-	osc_data->global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
-	status = AE_OK;
-
-query_osc_out:
-	kfree(output.pointer);
-out_nofree:
-	*ret_status = status;
-
-	osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
-	osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp;
-	if (ACPI_FAILURE(status)) {
-		/* no osc support at all */
-		osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
-	}
-
-	return status;
-}
-
-
-static acpi_status  
-acpi_run_osc (
-	acpi_handle	handle,
-	void		*context)
-{
-	acpi_status		status;
-	struct acpi_object_list	input;
-	union acpi_object 	in_params[4];
-	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
-	union acpi_object 	*out_obj;
-	u32			osc_dw0;
-
-	/* Setting up input parameters */
-	input.count = 4;
-	input.pointer = in_params;
-	in_params[0].type 		= ACPI_TYPE_BUFFER;
-	in_params[0].buffer.length 	= 16;
-	in_params[0].buffer.pointer	= OSC_UUID;
-	in_params[1].type 		= ACPI_TYPE_INTEGER;
-	in_params[1].integer.value 	= 1;
-	in_params[2].type 		= ACPI_TYPE_INTEGER;
-	in_params[2].integer.value	= 3;
-	in_params[3].type		= ACPI_TYPE_BUFFER;
-	in_params[3].buffer.length 	= 12;
-	in_params[3].buffer.pointer 	= (u8 *)context;
-
-	status = acpi_evaluate_object(handle, "_OSC", &input, &output);
-	if (ACPI_FAILURE (status))
-		return status;
-
-	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		printk(KERN_DEBUG  
-			"Evaluate _OSC returns wrong type\n");
-		status = AE_TYPE;
-		goto run_osc_out;
-	}
-	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
-	if (osc_dw0) {
-		if (osc_dw0 & OSC_REQUEST_ERROR)
-			printk(KERN_DEBUG "_OSC request fails\n"); 
-		if (osc_dw0 & OSC_INVALID_UUID_ERROR)
-			printk(KERN_DEBUG "_OSC invalid UUID\n"); 
-		if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
-			printk(KERN_DEBUG "_OSC invalid revision\n"); 
-		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
-			printk(KERN_DEBUG "_OSC FW not grant req. control\n");
-			status = AE_SUPPORT;
-			goto run_osc_out;
-		}
-		status = AE_ERROR;
-		goto run_osc_out;
-	}
-	status = AE_OK;
-
-run_osc_out:
-	kfree(output.pointer);
 	return status;
 }
 
@@ -215,15 +162,11 @@
  **/
 acpi_status __pci_osc_support_set(u32 flags, const char *hid)
 {
-	acpi_status retval = AE_NOT_FOUND;
-
-	if (!(flags & OSC_SUPPORT_MASKS)) {
+	if (!(flags & OSC_SUPPORT_MASKS))
 		return AE_TYPE;
-	}
-	acpi_get_devices(hid,
-			acpi_query_osc,
-			(void *)(unsigned long)flags,
-			(void **) &retval );
+
+	acpi_get_devices(hid, acpi_query_osc,
+			 (void *)(unsigned long)flags, NULL);
 	return AE_OK;
 }
 
@@ -236,10 +179,11 @@
  **/
 acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
 {
-	acpi_status	status;
-	u32		ctrlset;
+	acpi_status status;
+	u32 ctrlset, control_set;
 	acpi_handle tmp;
 	struct acpi_osc_data *osc_data;
+	struct acpi_osc_args osc_args;
 
 	status = acpi_get_handle(handle, "_OSC", &tmp);
 	if (ACPI_FAILURE(status))
@@ -252,24 +196,25 @@
 	}
 
 	ctrlset = (flags & OSC_CONTROL_MASKS);
-	if (!ctrlset) {
+	if (!ctrlset)
 		return AE_TYPE;
-	}
-	if (osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] &&
-		((osc_data->global_ctrlsets & ctrlset) != ctrlset)) {
+
+	if (osc_data->is_queried &&
+	    ((osc_data->query_result & ctrlset) != ctrlset))
 		return AE_SUPPORT;
-	}
-	osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset;
-	status = acpi_run_osc(handle, osc_data->ctrlset_buf);
-	if (ACPI_FAILURE (status)) {
-		osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset;
-	}
-	
+
+	control_set = osc_data->control_set | ctrlset;
+	osc_args.capbuf[OSC_QUERY_TYPE] = 0;
+	osc_args.capbuf[OSC_SUPPORT_TYPE] = osc_data->support_set;
+	osc_args.capbuf[OSC_CONTROL_TYPE] = control_set;
+	status = acpi_run_osc(handle, &osc_args);
+	if (ACPI_SUCCESS(status))
+		osc_data->control_set = control_set;
+
 	return status;
 }
 EXPORT_SYMBOL(pci_osc_control_set);
 
-#ifdef CONFIG_ACPI_SLEEP
 /*
  * _SxD returns the D-state with the highest power
  * (lowest D-state number) supported in the S-state "x".
@@ -313,7 +258,13 @@
 	}
 	return PCI_POWER_ERROR;
 }
-#endif
+
+static bool acpi_pci_power_manageable(struct pci_dev *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+	return handle ? acpi_bus_power_manageable(handle) : false;
+}
 
 static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
@@ -326,12 +277,11 @@
 		[PCI_D3hot] = ACPI_STATE_D3,
 		[PCI_D3cold] = ACPI_STATE_D3
 	};
+	int error = -EINVAL;
 
-	if (!handle)
-		return -ENODEV;
 	/* If the ACPI device has _EJ0, ignore the device */
-	if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
-		return 0;
+	if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
+		return -ENODEV;
 
 	switch (state) {
 	case PCI_D0:
@@ -339,11 +289,41 @@
 	case PCI_D2:
 	case PCI_D3hot:
 	case PCI_D3cold:
-		return acpi_bus_set_power(handle, state_conv[state]);
+		error = acpi_bus_set_power(handle, state_conv[state]);
 	}
-	return -EINVAL;
+
+	if (!error)
+		dev_printk(KERN_INFO, &dev->dev,
+				"power state changed by ACPI to D%d\n", state);
+
+	return error;
 }
 
+static bool acpi_pci_can_wakeup(struct pci_dev *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+	return handle ? acpi_bus_can_wakeup(handle) : false;
+}
+
+static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+	int error = acpi_pm_device_sleep_wake(&dev->dev, enable);
+
+	if (!error)
+		dev_printk(KERN_INFO, &dev->dev,
+				"wake-up capability %s by ACPI\n",
+				enable ? "enabled" : "disabled");
+	return error;
+}
+
+static struct pci_platform_pm_ops acpi_pci_platform_pm = {
+	.is_manageable = acpi_pci_power_manageable,
+	.set_state = acpi_pci_set_power_state,
+	.choose_state = acpi_pci_choose_state,
+	.can_wakeup = acpi_pci_can_wakeup,
+	.sleep_wake = acpi_pci_sleep_wake,
+};
 
 /* ACPI bus type */
 static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
@@ -395,10 +375,7 @@
 	ret = register_acpi_bus_type(&acpi_pci_bus);
 	if (ret)
 		return 0;
-#ifdef	CONFIG_ACPI_SLEEP
-	platform_pci_choose_state = acpi_pci_choose_state;
-#endif
-	platform_pci_set_power_state = acpi_pci_set_power_state;
+	pci_set_platform_pm(&acpi_pci_platform_pm);
 	return 0;
 }
 arch_initcall(acpi_pci_init);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e1637bd..a13f534 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -274,7 +274,57 @@
 	return 0;
 }
 
-static int pci_device_suspend(struct device * dev, pm_message_t state)
+static void pci_device_shutdown(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+
+	if (drv && drv->shutdown)
+		drv->shutdown(pci_dev);
+	pci_msi_shutdown(pci_dev);
+	pci_msix_shutdown(pci_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+/*
+ * Default "suspend" method for devices that have no driver provided suspend,
+ * or not even a driver at all.
+ */
+static void pci_default_pm_suspend(struct pci_dev *pci_dev)
+{
+	pci_save_state(pci_dev);
+	/*
+	 * mark its power state as "unknown", since we don't know if
+	 * e.g. the BIOS will change its device state when we suspend.
+	 */
+	if (pci_dev->current_state == PCI_D0)
+		pci_dev->current_state = PCI_UNKNOWN;
+}
+
+/*
+ * Default "resume" method for devices that have no driver provided resume,
+ * or not even a driver at all.
+ */
+static int pci_default_pm_resume(struct pci_dev *pci_dev)
+{
+	int retval = 0;
+
+	/* restore the PCI config space */
+	pci_restore_state(pci_dev);
+	/* if the device was enabled before suspend, reenable */
+	retval = pci_reenable_device(pci_dev);
+	/*
+	 * if the device was busmaster before the suspend, make it busmaster
+	 * again
+	 */
+	if (pci_dev->is_busmaster)
+		pci_set_master(pci_dev);
+
+	return retval;
+}
+
+static int pci_legacy_suspend(struct device *dev, pm_message_t state)
 {
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
@@ -284,18 +334,12 @@
 		i = drv->suspend(pci_dev, state);
 		suspend_report_result(drv->suspend, i);
 	} else {
-		pci_save_state(pci_dev);
-		/*
-		 * mark its power state as "unknown", since we don't know if
-		 * e.g. the BIOS will change its device state when we suspend.
-		 */
-		if (pci_dev->current_state == PCI_D0)
-			pci_dev->current_state = PCI_UNKNOWN;
+		pci_default_pm_suspend(pci_dev);
 	}
 	return i;
 }
 
-static int pci_device_suspend_late(struct device * dev, pm_message_t state)
+static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
 {
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
@@ -308,26 +352,7 @@
 	return i;
 }
 
-/*
- * Default resume method for devices that have no driver provided resume,
- * or not even a driver at all.
- */
-static int pci_default_resume(struct pci_dev *pci_dev)
-{
-	int retval = 0;
-
-	/* restore the PCI config space */
-	pci_restore_state(pci_dev);
-	/* if the device was enabled before suspend, reenable */
-	retval = pci_reenable_device(pci_dev);
-	/* if the device was busmaster before the suspend, make it busmaster again */
-	if (pci_dev->is_busmaster)
-		pci_set_master(pci_dev);
-
-	return retval;
-}
-
-static int pci_device_resume(struct device * dev)
+static int pci_legacy_resume(struct device *dev)
 {
 	int error;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
@@ -336,34 +361,313 @@
 	if (drv && drv->resume)
 		error = drv->resume(pci_dev);
 	else
-		error = pci_default_resume(pci_dev);
+		error = pci_default_pm_resume(pci_dev);
 	return error;
 }
 
-static int pci_device_resume_early(struct device * dev)
+static int pci_legacy_resume_early(struct device *dev)
 {
 	int error = 0;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
-	pci_fixup_device(pci_fixup_resume, pci_dev);
-
 	if (drv && drv->resume_early)
 		error = drv->resume_early(pci_dev);
 	return error;
 }
 
-static void pci_device_shutdown(struct device *dev)
+static int pci_pm_prepare(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm && drv->pm->prepare)
+		error = drv->pm->prepare(dev);
+
+	return error;
+}
+
+static void pci_pm_complete(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+
+	if (drv && drv->pm && drv->pm->complete)
+		drv->pm->complete(dev);
+}
+
+#ifdef CONFIG_SUSPEND
+
+static int pci_pm_suspend(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct device_driver *drv = dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->suspend) {
+			error = drv->pm->suspend(dev);
+			suspend_report_result(drv->pm->suspend, error);
+		} else {
+			pci_default_pm_suspend(pci_dev);
+		}
+	} else {
+		error = pci_legacy_suspend(dev, PMSG_SUSPEND);
+	}
+	pci_fixup_device(pci_fixup_suspend, pci_dev);
+
+	return error;
+}
+
+static int pci_pm_suspend_noirq(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct pci_driver *drv = pci_dev->driver;
+	int error = 0;
 
-	if (drv && drv->shutdown)
-		drv->shutdown(pci_dev);
-	pci_msi_shutdown(pci_dev);
-	pci_msix_shutdown(pci_dev);
+	if (drv && drv->pm) {
+		if (drv->pm->suspend_noirq) {
+			error = drv->pm->suspend_noirq(dev);
+			suspend_report_result(drv->pm->suspend_noirq, error);
+		}
+	} else {
+		error = pci_legacy_suspend_late(dev, PMSG_SUSPEND);
+	}
+
+	return error;
 }
 
+static int pci_pm_resume(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct device_driver *drv = dev->driver;
+	int error;
+
+	pci_fixup_device(pci_fixup_resume, pci_dev);
+
+	if (drv && drv->pm) {
+		error = drv->pm->resume ? drv->pm->resume(dev) :
+			pci_default_pm_resume(pci_dev);
+	} else {
+		error = pci_legacy_resume(dev);
+	}
+
+	return error;
+}
+
+static int pci_pm_resume_noirq(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+	int error = 0;
+
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
+
+	if (drv && drv->pm) {
+		if (drv->pm->resume_noirq)
+			error = drv->pm->resume_noirq(dev);
+	} else {
+		error = pci_legacy_resume_early(dev);
+	}
+
+	return error;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define pci_pm_suspend		NULL
+#define pci_pm_suspend_noirq	NULL
+#define pci_pm_resume		NULL
+#define pci_pm_resume_noirq	NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int pci_pm_freeze(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct device_driver *drv = dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->freeze) {
+			error = drv->pm->freeze(dev);
+			suspend_report_result(drv->pm->freeze, error);
+		} else {
+			pci_default_pm_suspend(pci_dev);
+		}
+	} else {
+		error = pci_legacy_suspend(dev, PMSG_FREEZE);
+		pci_fixup_device(pci_fixup_suspend, pci_dev);
+	}
+
+	return error;
+}
+
+static int pci_pm_freeze_noirq(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->freeze_noirq) {
+			error = drv->pm->freeze_noirq(dev);
+			suspend_report_result(drv->pm->freeze_noirq, error);
+		}
+	} else {
+		error = pci_legacy_suspend_late(dev, PMSG_FREEZE);
+	}
+
+	return error;
+}
+
+static int pci_pm_thaw(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->thaw)
+			error =  drv->pm->thaw(dev);
+	} else {
+		pci_fixup_device(pci_fixup_resume, to_pci_dev(dev));
+		error = pci_legacy_resume(dev);
+	}
+
+	return error;
+}
+
+static int pci_pm_thaw_noirq(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->thaw_noirq)
+			error = drv->pm->thaw_noirq(dev);
+	} else {
+		pci_fixup_device(pci_fixup_resume_early, pci_dev);
+		error = pci_legacy_resume_early(dev);
+	}
+
+	return error;
+}
+
+static int pci_pm_poweroff(struct device *dev)
+{
+	struct device_driver *drv = dev->driver;
+	int error = 0;
+
+	pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
+
+	if (drv && drv->pm) {
+		if (drv->pm->poweroff) {
+			error = drv->pm->poweroff(dev);
+			suspend_report_result(drv->pm->poweroff, error);
+		}
+	} else {
+		error = pci_legacy_suspend(dev, PMSG_HIBERNATE);
+	}
+
+	return error;
+}
+
+static int pci_pm_poweroff_noirq(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+	int error = 0;
+
+	if (drv && drv->pm) {
+		if (drv->pm->poweroff_noirq) {
+			error = drv->pm->poweroff_noirq(dev);
+			suspend_report_result(drv->pm->poweroff_noirq, error);
+		}
+	} else {
+		error = pci_legacy_suspend_late(dev, PMSG_HIBERNATE);
+	}
+
+	return error;
+}
+
+static int pci_pm_restore(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct device_driver *drv = dev->driver;
+	int error;
+
+	if (drv && drv->pm) {
+		error = drv->pm->restore ? drv->pm->restore(dev) :
+			pci_default_pm_resume(pci_dev);
+	} else {
+		error = pci_legacy_resume(dev);
+	}
+	pci_fixup_device(pci_fixup_resume, pci_dev);
+
+	return error;
+}
+
+static int pci_pm_restore_noirq(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+	int error = 0;
+
+	pci_fixup_device(pci_fixup_resume, pci_dev);
+
+	if (drv && drv->pm) {
+		if (drv->pm->restore_noirq)
+			error = drv->pm->restore_noirq(dev);
+	} else {
+		error = pci_legacy_resume_early(dev);
+	}
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
+
+	return error;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define pci_pm_freeze		NULL
+#define pci_pm_freeze_noirq	NULL
+#define pci_pm_thaw		NULL
+#define pci_pm_thaw_noirq	NULL
+#define pci_pm_poweroff		NULL
+#define pci_pm_poweroff_noirq	NULL
+#define pci_pm_restore		NULL
+#define pci_pm_restore_noirq	NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+struct pm_ext_ops pci_pm_ops = {
+	.base = {
+		.prepare = pci_pm_prepare,
+		.complete = pci_pm_complete,
+		.suspend = pci_pm_suspend,
+		.resume = pci_pm_resume,
+		.freeze = pci_pm_freeze,
+		.thaw = pci_pm_thaw,
+		.poweroff = pci_pm_poweroff,
+		.restore = pci_pm_restore,
+	},
+	.suspend_noirq = pci_pm_suspend_noirq,
+	.resume_noirq = pci_pm_resume_noirq,
+	.freeze_noirq = pci_pm_freeze_noirq,
+	.thaw_noirq = pci_pm_thaw_noirq,
+	.poweroff_noirq = pci_pm_poweroff_noirq,
+	.restore_noirq = pci_pm_restore_noirq,
+};
+
+#define PCI_PM_OPS_PTR	&pci_pm_ops
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define PCI_PM_OPS_PTR	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
 /**
  * __pci_register_driver - register a new pci driver
  * @drv: the driver structure to register
@@ -386,6 +690,9 @@
 	drv->driver.owner = owner;
 	drv->driver.mod_name = mod_name;
 
+	if (drv->pm)
+		drv->driver.pm = &drv->pm->base;
+
 	spin_lock_init(&drv->dynids.lock);
 	INIT_LIST_HEAD(&drv->dynids.list);
 
@@ -511,12 +818,9 @@
 	.uevent		= pci_uevent,
 	.probe		= pci_device_probe,
 	.remove		= pci_device_remove,
-	.suspend	= pci_device_suspend,
-	.suspend_late	= pci_device_suspend_late,
-	.resume_early	= pci_device_resume_early,
-	.resume		= pci_device_resume,
 	.shutdown	= pci_device_shutdown,
 	.dev_attrs	= pci_dev_attrs,
+	.pm		= PCI_PM_OPS_PTR,
 };
 
 static int __init pci_driver_init(void)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 75c6023..44a46c9 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1,6 +1,4 @@
 /*
- *	$Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $
- *
  *	PCI Bus Services, see include/linux/pci.h for further explanation.
  *
  *	Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
@@ -19,6 +17,7 @@
 #include <linux/string.h>
 #include <linux/log2.h>
 #include <linux/pci-aspm.h>
+#include <linux/pm_wakeup.h>
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
@@ -378,74 +377,90 @@
 		pci_update_resource(dev, &dev->resource[i], i);
 }
 
-int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+static struct pci_platform_pm_ops *pci_platform_pm;
+
+int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
+{
+	if (!ops->is_manageable || !ops->set_state || !ops->choose_state
+	    || !ops->sleep_wake || !ops->can_wakeup)
+		return -EINVAL;
+	pci_platform_pm = ops;
+	return 0;
+}
+
+static inline bool platform_pci_power_manageable(struct pci_dev *dev)
+{
+	return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
+}
+
+static inline int platform_pci_set_power_state(struct pci_dev *dev,
+                                                pci_power_t t)
+{
+	return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
+}
+
+static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
+{
+	return pci_platform_pm ?
+			pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
+}
+
+static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
+{
+	return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
+}
+
+static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+	return pci_platform_pm ?
+			pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
+}
 
 /**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to be suspended
- * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
+ * pci_raw_set_power_state - Use PCI PM registers to set the power state of
+ *                           given PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
  *
- * Transition a device to a new power state, using the Power Management 
- * Capabilities in the device's config space.
- *
- * RETURN VALUE: 
- * -EINVAL if trying to enter a lower state than we're already in.
- * 0 if we're already in the requested state.
- * -EIO if device does not support PCI PM.
- * 0 if we can successfully change the power state.
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
  */
-int
-pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
-	int pm, need_restore = 0;
-	u16 pmcsr, pmc;
+	u16 pmcsr;
+	bool need_restore = false;
 
-	/* bound the state we're entering */
-	if (state > PCI_D3hot)
-		state = PCI_D3hot;
-
-	/*
-	 * If the device or the parent bridge can't support PCI PM, ignore
-	 * the request if we're doing anything besides putting it into D0
-	 * (which would only happen on boot).
-	 */
-	if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
-		return 0;
-
-	/* find PCI PM capability in list */
-	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
-	/* abort if the device doesn't support PM capabilities */
-	if (!pm)
+	if (!dev->pm_cap)
 		return -EIO;
 
+	if (state < PCI_D0 || state > PCI_D3hot)
+		return -EINVAL;
+
 	/* Validate current state:
 	 * Can enter D0 from any state, but if we can only go deeper 
 	 * to sleep if we're already in a low power state
 	 */
-	if (state != PCI_D0 && dev->current_state > state) {
-		printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
-			__func__, pci_name(dev), state, dev->current_state);
+	if (dev->current_state == state) {
+		/* we're already there */
+		return 0;
+	} else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+	    && dev->current_state > state) {
+		dev_err(&dev->dev, "invalid power transition "
+			"(from state %d to %d)\n", dev->current_state, state);
 		return -EINVAL;
-	} else if (dev->current_state == state)
-		return 0;        /* we're already there */
-
-
-	pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
-	if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
-		printk(KERN_DEBUG
-		       "PCI: %s has unsupported PM cap regs version (%u)\n",
-		       pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
-		return -EIO;
 	}
 
 	/* check if this device supports the desired state */
-	if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1))
-		return -EIO;
-	else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))
+	if ((state == PCI_D1 && !dev->d1_support)
+	   || (state == PCI_D2 && !dev->d2_support))
 		return -EIO;
 
-	pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 
 	/* If we're (effectively) in D3, force entire word to 0.
 	 * This doesn't affect PME_Status, disables PME_En, and
@@ -461,7 +476,7 @@
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
 		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
-			need_restore = 1;
+			need_restore = true;
 		/* Fall-through: force to D0 */
 	default:
 		pmcsr = 0;
@@ -469,7 +484,7 @@
 	}
 
 	/* enter specified state */
-	pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr);
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
@@ -478,13 +493,6 @@
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(200);
 
-	/*
-	 * Give firmware a chance to be called, such as ACPI _PRx, _PSx
-	 * Firmware method after native method ?
-	 */
-	if (platform_pci_set_power_state)
-		platform_pci_set_power_state(dev, state);
-
 	dev->current_state = state;
 
 	/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
@@ -508,8 +516,77 @@
 	return 0;
 }
 
-pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev);
- 
+/**
+ * pci_update_current_state - Read PCI power state of given device from its
+ *                            PCI PM registers and cache it
+ * @dev: PCI device to handle.
+ */
+static void pci_update_current_state(struct pci_dev *dev)
+{
+	if (dev->pm_cap) {
+		u16 pmcsr;
+
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+	}
+}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform formware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if device already is in the requested state.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	int error;
+
+	/* bound the state we're entering */
+	if (state > PCI_D3hot)
+		state = PCI_D3hot;
+	else if (state < PCI_D0)
+		state = PCI_D0;
+	else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+		/*
+		 * If the device or the parent bridge do not support PCI PM,
+		 * ignore the request if we're doing anything other than putting
+		 * it into D0 (which would only happen on boot).
+		 */
+		return 0;
+
+	if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
+		/*
+		 * Allow the platform to change the state, for example via ACPI
+		 * _PR0, _PS0 and some such, but do not trust it.
+		 */
+		int ret = platform_pci_set_power_state(dev, PCI_D0);
+		if (!ret)
+			pci_update_current_state(dev);
+	}
+
+	error = pci_raw_set_power_state(dev, state);
+
+	if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
+		/* Allow the platform to finalize the transition */
+		int ret = platform_pci_set_power_state(dev, state);
+		if (!ret) {
+			pci_update_current_state(dev);
+			error = 0;
+		}
+	}
+
+	return error;
+}
+
 /**
  * pci_choose_state - Choose the power state of a PCI device
  * @dev: PCI device to be suspended
@@ -527,11 +604,9 @@
 	if (!pci_find_capability(dev, PCI_CAP_ID_PM))
 		return PCI_D0;
 
-	if (platform_pci_choose_state) {
-		ret = platform_pci_choose_state(dev);
-		if (ret != PCI_POWER_ERROR)
-			return ret;
-	}
+	ret = platform_pci_choose_state(dev);
+	if (ret != PCI_POWER_ERROR)
+		return ret;
 
 	switch (state.event) {
 	case PM_EVENT_ON:
@@ -543,7 +618,8 @@
 	case PM_EVENT_HIBERNATE:
 		return PCI_D3hot;
 	default:
-		printk("Unrecognized suspend event %d\n", state.event);
+		dev_info(&dev->dev, "unrecognized suspend event %d\n",
+			 state.event);
 		BUG();
 	}
 	return PCI_D0;
@@ -568,7 +644,7 @@
 	else
 		found = 1;
 	if (!save_state) {
-		dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+		dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
 		return -ENOMEM;
 	}
 	cap = (u16 *)&save_state->data[0];
@@ -619,7 +695,7 @@
 	else
 		found = 1;
 	if (!save_state) {
-		dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+		dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
 		return -ENOMEM;
 	}
 	cap = (u16 *)&save_state->data[0];
@@ -685,10 +761,9 @@
 	for (i = 15; i >= 0; i--) {
 		pci_read_config_dword(dev, i * 4, &val);
 		if (val != dev->saved_config_space[i]) {
-			printk(KERN_DEBUG "PM: Writing back config space on "
-				"device %s at offset %x (was %x, writing %x)\n",
-				pci_name(dev), i,
-				val, (int)dev->saved_config_space[i]);
+			dev_printk(KERN_DEBUG, &dev->dev, "restoring config "
+				"space at offset %#x (was %#x, writing %#x)\n",
+				i, val, (int)dev->saved_config_space[i]);
 			pci_write_config_dword(dev,i * 4,
 				dev->saved_config_space[i]);
 		}
@@ -961,6 +1036,46 @@
 }
 
 /**
+ * pci_pme_capable - check the capability of PCI device to generate PME#
+ * @dev: PCI device to handle.
+ * @state: PCI state from which device will issue PME#.
+ */
+static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
+{
+	if (!dev->pm_cap)
+		return false;
+
+	return !!(dev->pme_support & (1 << state));
+}
+
+/**
+ * pci_pme_active - enable or disable PCI device's PME# function
+ * @dev: PCI device to handle.
+ * @enable: 'true' to enable PME# generation; 'false' to disable it.
+ *
+ * The caller must verify that the device is capable of generating PME# before
+ * calling this function with @enable equal to 'true'.
+ */
+static void pci_pme_active(struct pci_dev *dev, bool enable)
+{
+	u16 pmcsr;
+
+	if (!dev->pm_cap)
+		return;
+
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	/* Clear PME_Status by writing 1 to it and enable PME# */
+	pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+	if (!enable)
+		pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+
+	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
+
+	dev_printk(KERN_INFO, &dev->dev, "PME# %s\n",
+			enable ? "enabled" : "disabled");
+}
+
+/**
  * pci_enable_wake - enable PCI device as wakeup event source
  * @dev: PCI device affected
  * @state: PCI state from which device will issue wakeup events
@@ -971,66 +1086,173 @@
  * called automatically by this routine.
  *
  * Devices with legacy power management (no standard PCI PM capabilities)
- * always require such platform hooks.  Depending on the platform, devices
- * supporting the standard PCI PME# signal may require such platform hooks;
- * they always update bits in config space to allow PME# generation.
+ * always require such platform hooks.
  *
- * -EIO is returned if the device can't ever be a wakeup event source.
- * -EINVAL is returned if the device can't generate wakeup events from
- * the specified PCI state.  Returns zero if the operation is successful.
+ * RETURN VALUE:
+ * 0 is returned on success
+ * -EINVAL is returned if device is not supposed to wake up the system
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
  */
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
 {
-	int pm;
-	int status;
-	u16 value;
+	int error = 0;
+	bool pme_done = false;
 
-	/* Note that drivers should verify device_may_wakeup(&dev->dev)
-	 * before calling this function.  Platform code should report
-	 * errors when drivers try to enable wakeup on devices that
-	 * can't issue wakeups, or on which wakeups were disabled by
-	 * userspace updating the /sys/devices.../power/wakeup file.
+	if (!device_may_wakeup(&dev->dev))
+		return -EINVAL;
+
+	/*
+	 * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
+	 * Anderson we should be doing PME# wake enable followed by ACPI wake
+	 * enable.  To disable wake-up we call the platform first, for symmetry.
 	 */
 
-	status = call_platform_enable_wakeup(&dev->dev, enable);
+	if (!enable && platform_pci_can_wakeup(dev))
+		error = platform_pci_sleep_wake(dev, false);
+
+	if (!enable || pci_pme_capable(dev, state)) {
+		pci_pme_active(dev, enable);
+		pme_done = true;
+	}
+
+	if (enable && platform_pci_can_wakeup(dev))
+		error = platform_pci_sleep_wake(dev, true);
+
+	return pme_done ? 0 : error;
+}
+
+/**
+ * pci_prepare_to_sleep - prepare PCI device for system-wide transition into
+ *                        a sleep state
+ * @dev: Device to handle.
+ *
+ * Choose the power state appropriate for the device depending on whether
+ * it can wake up the system and/or is power manageable by the platform
+ * (PCI_D3hot is the default) and put the device into that state.
+ */
+int pci_prepare_to_sleep(struct pci_dev *dev)
+{
+	pci_power_t target_state = PCI_D3hot;
+	int error;
+
+	if (platform_pci_power_manageable(dev)) {
+		/*
+		 * Call the platform to choose the target state of the device
+		 * and enable wake-up from this state if supported.
+		 */
+		pci_power_t state = platform_pci_choose_state(dev);
+
+		switch (state) {
+		case PCI_POWER_ERROR:
+		case PCI_UNKNOWN:
+			break;
+		case PCI_D1:
+		case PCI_D2:
+			if (pci_no_d1d2(dev))
+				break;
+		default:
+			target_state = state;
+		}
+	} else if (device_may_wakeup(&dev->dev)) {
+		/*
+		 * Find the deepest state from which the device can generate
+		 * wake-up events, make it the target state and enable device
+		 * to generate PME#.
+		 */
+		if (!dev->pm_cap)
+			return -EIO;
+
+		if (dev->pme_support) {
+			while (target_state
+			      && !(dev->pme_support & (1 << target_state)))
+				target_state--;
+		}
+	}
+
+	pci_enable_wake(dev, target_state, true);
+
+	error = pci_set_power_state(dev, target_state);
+
+	if (error)
+		pci_enable_wake(dev, target_state, false);
+
+	return error;
+}
+
+/**
+ * pci_back_from_sleep - turn PCI device on during system-wide transition into
+ *                       the working state a sleep state
+ * @dev: Device to handle.
+ *
+ * Disable device's sytem wake-up capability and put it into D0.
+ */
+int pci_back_from_sleep(struct pci_dev *dev)
+{
+	pci_enable_wake(dev, PCI_D0, false);
+	return pci_set_power_state(dev, PCI_D0);
+}
+
+/**
+ * pci_pm_init - Initialize PM functions of given PCI device
+ * @dev: PCI device to handle.
+ */
+void pci_pm_init(struct pci_dev *dev)
+{
+	int pm;
+	u16 pmc;
+
+	dev->pm_cap = 0;
 
 	/* find PCI PM capability in list */
 	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
-	/* If device doesn't support PM Capabilities, but caller wants to
-	 * disable wake events, it's a NOP.  Otherwise fail unless the
-	 * platform hooks handled this legacy device already.
-	 */
 	if (!pm)
-		return enable ? status : 0;
-
+		return;
 	/* Check device's ability to generate PME# */
-	pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
+	pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
 
-	value &= PCI_PM_CAP_PME_MASK;
-	value >>= ffs(PCI_PM_CAP_PME_MASK) - 1;   /* First bit of mask */
-
-	/* Check if it can generate PME# from requested state. */
-	if (!value || !(value & (1 << state))) {
-		/* if it can't, revert what the platform hook changed,
-		 * always reporting the base "EINVAL, can't PME#" error
-		 */
-		if (enable)
-			call_platform_enable_wakeup(&dev->dev, 0);
-		return enable ? -EINVAL : 0;
+	if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
+		dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
+			pmc & PCI_PM_CAP_VER_MASK);
+		return;
 	}
 
-	pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
+	dev->pm_cap = pm;
 
-	/* Clear PME_Status by writing 1 to it and enable PME# */
-	value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+	dev->d1_support = false;
+	dev->d2_support = false;
+	if (!pci_no_d1d2(dev)) {
+		if (pmc & PCI_PM_CAP_D1) {
+			dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n");
+			dev->d1_support = true;
+		}
+		if (pmc & PCI_PM_CAP_D2) {
+			dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n");
+			dev->d2_support = true;
+		}
+	}
 
-	if (!enable)
-		value &= ~PCI_PM_CTRL_PME_ENABLE;
-
-	pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
-
-	return 0;
+	pmc &= PCI_PM_CAP_PME_MASK;
+	if (pmc) {
+		dev_printk(KERN_INFO, &dev->dev,
+			"PME# supported from%s%s%s%s%s\n",
+			(pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
+			(pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
+			(pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
+			(pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
+			(pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
+		dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
+		/*
+		 * Make device's PM flags reflect the wake-up capability, but
+		 * let the user space enable it to wake up the system as needed.
+		 */
+		device_set_wakeup_capable(&dev->dev, true);
+		device_set_wakeup_enable(&dev->dev, false);
+		/* Disable the PME# generation functionality */
+		pci_pme_active(dev, false);
+	} else {
+		dev->pme_support = 0;
+	}
 }
 
 int
@@ -1116,13 +1338,11 @@
 	return 0;
 
 err_out:
-	printk (KERN_WARNING "PCI: Unable to reserve %s region #%d:%llx@%llx "
-		"for device %s\n",
-		pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
-		bar + 1, /* PCI BAR # */
-		(unsigned long long)pci_resource_len(pdev, bar),
-		(unsigned long long)pci_resource_start(pdev, bar),
-		pci_name(pdev));
+	dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n",
+		 bar,
+		 pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
+		 (unsigned long long)pci_resource_start(pdev, bar),
+		 (unsigned long long)pci_resource_end(pdev, bar));
 	return -EBUSY;
 }
 
@@ -1214,7 +1434,7 @@
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	if (! (cmd & PCI_COMMAND_MASTER)) {
-		pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
+		dev_dbg(&dev->dev, "enabling bus mastering\n");
 		cmd |= PCI_COMMAND_MASTER;
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
@@ -1279,8 +1499,8 @@
 	if (cacheline_size == pci_cache_line_size)
 		return 0;
 
-	printk(KERN_DEBUG "PCI: cache line size of %d is not supported "
-	       "by device %s\n", pci_cache_line_size << 2, pci_name(dev));
+	dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
+		   "supported\n", pci_cache_line_size << 2);
 
 	return -EINVAL;
 }
@@ -1305,8 +1525,7 @@
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	if (! (cmd & PCI_COMMAND_INVALIDATE)) {
-		pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
-			pci_name(dev));
+		dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
 		cmd |= PCI_COMMAND_INVALIDATE;
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
@@ -1702,5 +1921,7 @@
 EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
 EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL(pci_prepare_to_sleep);
+EXPORT_SYMBOL(pci_back_from_sleep);
 EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 312daff..d807cd7 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -5,10 +5,36 @@
 extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
 extern void pci_cleanup_rom(struct pci_dev *dev);
 
-/* Firmware callbacks */
-extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev);
-extern int (*platform_pci_set_power_state)(struct pci_dev *dev,
-						pci_power_t state);
+/**
+ * Firmware PM callbacks
+ *
+ * @is_manageable - returns 'true' if given device is power manageable by the
+ *                  platform firmware
+ *
+ * @set_state - invokes the platform firmware to set the device's power state
+ *
+ * @choose_state - returns PCI power state of given device preferred by the
+ *                 platform; to be used during system-wide transitions from a
+ *                 sleeping state to the working state and vice versa
+ *
+ * @can_wakeup - returns 'true' if given device is capable of waking up the
+ *               system from a sleeping state
+ *
+ * @sleep_wake - enables/disables the system wake up capability of given device
+ *
+ * If given platform is generally capable of power managing PCI devices, all of
+ * these callbacks are mandatory.
+ */
+struct pci_platform_pm_ops {
+	bool (*is_manageable)(struct pci_dev *dev);
+	int (*set_state)(struct pci_dev *dev, pci_power_t state);
+	pci_power_t (*choose_state)(struct pci_dev *dev);
+	bool (*can_wakeup)(struct pci_dev *dev);
+	int (*sleep_wake)(struct pci_dev *dev, bool enable);
+};
+
+extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
+extern void pci_pm_init(struct pci_dev *dev);
 
 extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
 extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
@@ -105,3 +131,16 @@
 }
 
 struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
+
+/* PCI slot sysfs helper code */
+#define to_pci_slot(s) container_of(s, struct pci_slot, kobj)
+
+extern struct kset *pci_slots_kset;
+
+struct pci_slot_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct pci_slot *, char *);
+	ssize_t (*store)(struct pci_slot *, const char *, size_t);
+};
+#define to_pci_slot_attr(s) container_of(s, struct pci_slot_attribute, attr)
+
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 07c3bdb..77036f4 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -26,6 +26,7 @@
 #include <linux/pcieport_if.h>
 
 #include "aerdrv.h"
+#include "../../pci.h"
 
 /*
  * Version Information
@@ -219,8 +220,7 @@
 
 	/* Alloc rpc data structure */
 	if (!(rpc = aer_alloc_rpc(dev))) {
-		printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n",
-			__func__, device->bus_id);
+		dev_printk(KERN_DEBUG, device, "alloc rpc failed\n");
 		aer_remove(dev);
 		return -ENOMEM;
 	}
@@ -228,8 +228,7 @@
 	/* Request IRQ ISR */
 	if ((status = request_irq(dev->irq, aer_irq, IRQF_SHARED, "aerdrv",
 				dev))) {
-		printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n",
-			__func__, device->bus_id);
+		dev_printk(KERN_DEBUG, device, "request IRQ failed\n");
 		aer_remove(dev);
 		return status;
 	}
@@ -273,7 +272,7 @@
 	 * to issue Configuration Requests to those devices.
 	 */
 	msleep(200);
-	printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id);
+	dev_printk(KERN_DEBUG, &dev->dev, "Root Port link has been reset\n");
 
 	/* Enable Root Port's interrupt in response to error messages */
 	pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index d39a78d..30f581b 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -50,10 +50,10 @@
 	}
 
 	if (ACPI_FAILURE(status)) {
-		printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
-		    pciedev->device.bus_id,
-		    (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
-		    "no _OSC support" : "Run ACPI _OSC fails");
+		dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't "
+			   "init device: %s\n",
+			   (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+			   "no _OSC support" : "_OSC failed");
 		return -1;
 	}
 
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index aaa8239..ee5e7b5 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -221,9 +221,9 @@
 			 * of a driver for this device is unaware of
 			 * its hw state.
 			 */
-			printk(KERN_DEBUG "Device ID[%s] has %s\n",
-					dev->dev.bus_id, (dev->driver) ?
-					"no AER-aware driver" : "no driver");
+			dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n",
+				   dev->driver ?
+				   "no AER-aware driver" : "no driver");
 		}
 		return;
 	}
@@ -304,7 +304,7 @@
 {
 	struct aer_broadcast_data result_data;
 
-	printk(KERN_DEBUG "Broadcast %s message\n", error_mesg);
+	dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg);
 	result_data.state = state;
 	if (cb == report_error_detected)
 		result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
@@ -404,18 +404,16 @@
 			data.aer_driver =
 				to_service_driver(aerdev->device.driver);
 		} else {
-			printk(KERN_DEBUG "No link-reset support to Device ID"
-				"[%s]\n",
-				dev->dev.bus_id);
+			dev_printk(KERN_DEBUG, &dev->dev, "no link-reset "
+				   "support\n");
 			return PCI_ERS_RESULT_DISCONNECT;
 		}
 	}
 
 	status = data.aer_driver->reset_link(udev);
 	if (status != PCI_ERS_RESULT_RECOVERED) {
-		printk(KERN_DEBUG "Link reset at upstream Device ID"
-			"[%s] failed\n",
-			udev->dev.bus_id);
+		dev_printk(KERN_DEBUG, &dev->dev, "link reset at upstream "
+			   "device %s failed\n", pci_name(udev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
@@ -511,10 +509,12 @@
 	} else {
 		status = do_recovery(aerdev, dev, info.severity);
 		if (status == PCI_ERS_RESULT_RECOVERED) {
-			printk(KERN_DEBUG "AER driver successfully recovered\n");
+			dev_printk(KERN_DEBUG, &dev->dev, "AER driver "
+				   "successfully recovered\n");
 		} else {
 			/* TODO: Should kernel panic here? */
-			printk(KERN_DEBUG "AER driver didn't recover\n");
+			dev_printk(KERN_DEBUG, &dev->dev, "AER driver didn't "
+				   "recover\n");
 		}
 	}
 }
diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c
index 3f09768..359fe55 100644
--- a/drivers/pci/pcie/portdrv_bus.c
+++ b/drivers/pci/pcie/portdrv_bus.c
@@ -13,6 +13,7 @@
 #include <linux/pm.h>
 
 #include <linux/pcieport_if.h>
+#include "portdrv.h"
 
 static int pcie_port_bus_match(struct device *dev, struct device_driver *drv);
 static int pcie_port_bus_suspend(struct device *dev, pm_message_t state);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index fb0abfa..890f0d2 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -23,20 +23,20 @@
 {
 	struct pcie_device *pciedev;
 	struct pcie_port_service_driver *driver;
-	int status = -ENODEV;
+	int status;
 
 	if (!dev || !dev->driver)
-		return status;
+		return -ENODEV;
 
  	driver = to_service_driver(dev->driver);
 	if (!driver || !driver->probe)
-		return status;
+		return -ENODEV;
 
 	pciedev = to_pcie_device(dev);
 	status = driver->probe(pciedev, driver->id_table);
 	if (!status) {
-		printk(KERN_DEBUG "Load service driver %s on pcie device %s\n",
-			driver->name, dev->bus_id);
+		dev_printk(KERN_DEBUG, dev, "service driver %s loaded\n",
+			driver->name);
 		get_device(dev);
 	}
 	return status;
@@ -53,8 +53,8 @@
 	pciedev = to_pcie_device(dev);
  	driver = to_service_driver(dev->driver);
 	if (driver && driver->remove) { 
-		printk(KERN_DEBUG "Unload service driver %s on pcie device %s\n",
-			driver->name, dev->bus_id);
+		dev_printk(KERN_DEBUG, dev, "unloading service driver %s\n",
+			driver->name);
 		driver->remove(pciedev);
 		put_device(dev);
 	}
@@ -103,7 +103,7 @@
  */
 static void release_pcie_device(struct device *dev)
 {
-	printk(KERN_DEBUG "Free Port Service[%s]\n", dev->bus_id);
+	dev_printk(KERN_DEBUG, dev, "free port service\n");
 	kfree(to_pcie_device(dev));			
 }
 
@@ -150,7 +150,7 @@
 	if (pos) {
 		struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] = 
 			{{0, 0}, {0, 1}, {0, 2}, {0, 3}};
-		printk("%s Found MSIX capability\n", __func__);
+		dev_info(&dev->dev, "found MSI-X capability\n");
 		status = pci_enable_msix(dev, msix_entries, nvec);
 		if (!status) {
 			int j = 0;
@@ -165,7 +165,7 @@
 	if (status) {
 		pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
 		if (pos) {
-			printk("%s Found MSI capability\n", __func__);
+			dev_info(&dev->dev, "found MSI capability\n");
 			status = pci_enable_msi(dev);
 			if (!status) {
 				interrupt_mode = PCIE_PORT_MSI_MODE;
@@ -252,7 +252,7 @@
 		return NULL;
 
 	pcie_device_init(parent, device, port_type, service_type, irq,irq_mode);
-	printk(KERN_DEBUG "Allocate Port Service[%s]\n", device->device.bus_id);
+	dev_printk(KERN_DEBUG, &device->device, "allocate port service\n");
 	return device;
 }
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 51d1632..367c9c2 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -91,9 +91,8 @@
 	
 	pci_set_master(dev);
         if (!dev->irq && dev->pin) {
-		printk(KERN_WARNING 
-		"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n", 
-		__func__, dev->vendor, dev->device);
+		dev_warn(&dev->dev, "device [%04x/%04x] has invalid IRQ; "
+			 "check vendor BIOS\n", dev->vendor, dev->device);
 	}
 	if (pcie_port_device_register(dev)) {
 		pci_disable_device(dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 3706ce7..b1724cf 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -277,8 +277,8 @@
 			res->end = res->start + sz64;
 #else
 			if (sz64 > 0x100000000ULL) {
-				printk(KERN_ERR "PCI: Unable to handle 64-bit "
-					"BAR for device %s\n", pci_name(dev));
+				dev_err(&dev->dev, "BAR %d: can't handle 64-bit"
+					" BAR\n", pos);
 				res->start = 0;
 				res->flags = 0;
 			} else if (lhi) {
@@ -329,7 +329,7 @@
 		return;
 
 	if (dev->transparent) {
-		printk(KERN_INFO "PCI: Transparent bridge - %s\n", pci_name(dev));
+		dev_info(&dev->dev, "transparent bridge\n");
 		for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
 			child->resource[i] = child->parent->resource[i - 3];
 	}
@@ -392,7 +392,8 @@
 			limit |= ((long) mem_limit_hi) << 32;
 #else
 			if (mem_base_hi || mem_limit_hi) {
-				printk(KERN_ERR "PCI: Unable to handle 64-bit address space for bridge %s\n", pci_name(dev));
+				dev_err(&dev->dev, "can't handle 64-bit "
+					"address space for bridge\n");
 				return;
 			}
 #endif
@@ -414,6 +415,7 @@
 		INIT_LIST_HEAD(&b->node);
 		INIT_LIST_HEAD(&b->children);
 		INIT_LIST_HEAD(&b->devices);
+		INIT_LIST_HEAD(&b->slots);
 	}
 	return b;
 }
@@ -511,8 +513,8 @@
 
 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
 
-	pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
-		 pci_name(dev), buses & 0xffffff, pass);
+	dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n",
+		buses & 0xffffff, pass);
 
 	/* Disable MasterAbortMode during probing to avoid reporting
 	   of bus errors (in some architectures) */ 
@@ -535,8 +537,8 @@
 		 * ignore it.  This can happen with the i450NX chipset.
 		 */
 		if (pci_find_bus(pci_domain_nr(bus), busnr)) {
-			printk(KERN_INFO "PCI: Bus %04x:%02x already known\n",
-					pci_domain_nr(bus), busnr);
+			dev_info(&dev->dev, "bus %04x:%02x already known\n",
+				 pci_domain_nr(bus), busnr);
 			goto out;
 		}
 
@@ -711,8 +713,9 @@
 {
 	u32 class;
 
-	sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
-		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
+		     dev->bus->number, PCI_SLOT(dev->devfn),
+		     PCI_FUNC(dev->devfn));
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
 	dev->revision = class & 0xff;
@@ -720,7 +723,7 @@
 	dev->class = class;
 	class >>= 8;
 
-	pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
+	dev_dbg(&dev->dev, "found [%04x/%04x] class %06x header type %02x\n",
 		 dev->vendor, dev->device, class, dev->hdr_type);
 
 	/* "Unknown power state" */
@@ -788,13 +791,13 @@
 		break;
 
 	default:				    /* unknown header */
-		printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
-			pci_name(dev), dev->hdr_type);
+		dev_err(&dev->dev, "unknown header type %02x, "
+			"ignoring device\n", dev->hdr_type);
 		return -1;
 
 	bad:
-		printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
-		       pci_name(dev), class, dev->hdr_type);
+		dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
+			"type %02x)\n", class, dev->hdr_type);
 		dev->class = PCI_CLASS_NOT_DEFINED;
 	}
 
@@ -927,7 +930,7 @@
 			return NULL;
 		/* Card hasn't responded in 60 seconds?  Must be stuck. */
 		if (delay > 60 * 1000) {
-			printk(KERN_WARNING "Device %04x:%02x:%02x.%d not "
+			printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not "
 					"responding\n", pci_domain_nr(bus),
 					bus->number, PCI_SLOT(devfn),
 					PCI_FUNC(devfn));
@@ -984,6 +987,9 @@
 	/* Fix up broken headers */
 	pci_fixup_device(pci_fixup_header, dev);
 
+	/* Initialize power management of the device */
+	pci_pm_init(dev);
+
 	/*
 	 * Add the device to our list of discovered devices
 	 * and the bus list for fixup functions, etc.
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 963a976..4400dff 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -1,6 +1,4 @@
 /*
- *	$Id: proc.c,v 1.13 1998/05/12 07:36:07 mj Exp $
- *
  *	Procfs interface for the PCI bus.
  *
  *	Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
@@ -482,5 +480,5 @@
 	return 0;
 }
 
-__initcall(pci_proc_init);
+device_initcall(pci_proc_init);
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 338a3f9..12d4893 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -556,7 +556,7 @@
 	pci_write_config_byte (dev, 0x58, tmp);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686,	quirk_via_ioapic);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686,	quirk_via_ioapic);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686,	quirk_via_ioapic);
 
 /*
  * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
@@ -576,7 +576,7 @@
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237,		quirk_via_vt8237_bypass_apic_deassert);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237,		quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237,		quirk_via_vt8237_bypass_apic_deassert);
 
 /*
  * The AMD io apic can hang the box when an apic irq is masked.
@@ -622,7 +622,7 @@
         }
 } 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
 #endif /* CONFIG_X86_IO_APIC */
 
 /*
@@ -774,7 +774,7 @@
 	pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
-DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
 
 /*
  * Following the PCI ordering rules is optional on the AMD762. I'm not
@@ -797,7 +797,7 @@
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
 
 /*
  *	DreamWorks provided workaround for Dunord I-3000 problem
@@ -865,7 +865,7 @@
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454NX,	quirk_disable_pxb);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454NX,	quirk_disable_pxb);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454NX,	quirk_disable_pxb);
 
 static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
 {
@@ -885,9 +885,9 @@
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
 
 /*
  *	Serverworks CSB5 IDE does not fully support native mode
@@ -1054,6 +1054,20 @@
 				 * its on-board VGA controller */
 				asus_hides_smbus = 1;
 			}
+		else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_IG)
+			switch(dev->subsystem_device) {
+			case 0x00b8: /* Compaq Evo D510 CMT */
+			case 0x00b9: /* Compaq Evo D510 SFF */
+				asus_hides_smbus = 1;
+			}
+		else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
+			switch (dev->subsystem_device) {
+			case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
+				/* Motherboard doesn't have host bridge
+				 * subvendor/subdevice IDs, therefore checking
+				 * its on-board VGA controller */
+				asus_hides_smbus = 1;
+			}
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82845_HB,	asus_hides_smbus_hostbridge);
@@ -1068,6 +1082,8 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82810_IG3,	asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82845G_IG,	asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82815_CGC,	asus_hides_smbus_hostbridge);
 
 static void asus_hides_smbus_lpc(struct pci_dev *dev)
 {
@@ -1093,31 +1109,61 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_12,	asus_hides_smbus_lpc);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_12,	asus_hides_smbus_lpc);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801EB_0,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801AA_0,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_0,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801BA_0,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_0,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_12,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_12,	asus_hides_smbus_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801EB_0,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801AA_0,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_0,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801BA_0,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_0,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_12,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_12,	asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801EB_0,	asus_hides_smbus_lpc);
 
-static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+/* It appears we just have one such device. If not, we have a warning */
+static void __iomem *asus_rcba_base;
+static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
 {
-	u32 val, rcba;
-	void __iomem *base;
+	u32 rcba;
 
 	if (likely(!asus_hides_smbus))
 		return;
+	WARN_ON(asus_rcba_base);
+
 	pci_read_config_dword(dev, 0xF0, &rcba);
-	base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */
-	if (base == NULL) return;
-	val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */
-	writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */
-	iounmap(base);
+	/* use bits 31:14, 16 kB aligned */
+	asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000);
+	if (asus_rcba_base == NULL)
+		return;
+}
+
+static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
+{
+	u32 val;
+
+	if (likely(!asus_hides_smbus || !asus_rcba_base))
+		return;
+	/* read the Function Disable register, dword mode only */
+	val = readl(asus_rcba_base + 0x3418);
+	writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */
+}
+
+static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
+{
+	if (likely(!asus_hides_smbus || !asus_rcba_base))
+		return;
+	iounmap(asus_rcba_base);
+	asus_rcba_base = NULL;
 	dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n");
 }
+
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+{
+	asus_hides_smbus_lpc_ich6_suspend(dev);
+	asus_hides_smbus_lpc_ich6_resume_early(dev);
+	asus_hides_smbus_lpc_ich6_resume(dev);
+}
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6);
+DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6_suspend);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6_resume);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6_resume_early);
 
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
@@ -1135,10 +1181,10 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_962,		quirk_sis_96x_smbus);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_961,		quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_962,		quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_961,		quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_962,		quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus);
 
 /*
  * ... This is further complicated by the fact that some SiS96x south
@@ -1172,7 +1218,7 @@
 	quirk_sis_96x_smbus(dev);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_503,		quirk_sis_503);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_503,		quirk_sis_503);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_503,		quirk_sis_503);
 
 
 /*
@@ -1205,7 +1251,7 @@
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
 
 #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
 
@@ -1270,12 +1316,12 @@
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
 
 #endif
 
@@ -1521,6 +1567,10 @@
 extern struct pci_fixup __end_pci_fixups_enable[];
 extern struct pci_fixup __start_pci_fixups_resume[];
 extern struct pci_fixup __end_pci_fixups_resume[];
+extern struct pci_fixup __start_pci_fixups_resume_early[];
+extern struct pci_fixup __end_pci_fixups_resume_early[];
+extern struct pci_fixup __start_pci_fixups_suspend[];
+extern struct pci_fixup __end_pci_fixups_suspend[];
 
 
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
@@ -1553,6 +1603,16 @@
 		end = __end_pci_fixups_resume;
 		break;
 
+	case pci_fixup_resume_early:
+		start = __start_pci_fixups_resume_early;
+		end = __end_pci_fixups_resume_early;
+		break;
+
+	case pci_fixup_suspend:
+		start = __start_pci_fixups_suspend;
+		end = __end_pci_fixups_suspend;
+		break;
+
 	default:
 		/* stupid compiler warning, you would think with an enum... */
 		return;
@@ -1629,7 +1689,7 @@
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
 			quirk_nvidia_ck804_pcie_aer_ext_cap);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
 			quirk_nvidia_ck804_pcie_aer_ext_cap);
 
 static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8ddb918..827c0a5 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -27,13 +27,6 @@
 #include <linux/slab.h>
 
 
-#define DEBUG_CONFIG 1
-#if DEBUG_CONFIG
-#define DBG(x...)     printk(x)
-#else
-#define DBG(x...)
-#endif
-
 static void pbus_assign_resources_sorted(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
@@ -81,8 +74,8 @@
 	struct pci_dev *bridge = bus->self;
 	struct pci_bus_region region;
 
-	printk("PCI: Bus %d, cardbus bridge: %s\n",
-		bus->number, pci_name(bridge));
+	dev_info(&bridge->dev, "CardBus bridge, secondary bus %04x:%02x\n",
+		 pci_domain_nr(bus), bus->number);
 
 	pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
 	if (bus->resource[0]->flags & IORESOURCE_IO) {
@@ -90,7 +83,7 @@
 		 * The IO resource is allocated a range twice as large as it
 		 * would normally need.  This allows us to set both IO regs.
 		 */
-		printk(KERN_INFO "  IO window: 0x%08lx-0x%08lx\n",
+		dev_info(&bridge->dev, "  IO window: %#08lx-%#08lx\n",
 		       (unsigned long)region.start,
 		       (unsigned long)region.end);
 		pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
@@ -101,7 +94,7 @@
 
 	pcibios_resource_to_bus(bridge, &region, bus->resource[1]);
 	if (bus->resource[1]->flags & IORESOURCE_IO) {
-		printk(KERN_INFO "  IO window: 0x%08lx-0x%08lx\n",
+		dev_info(&bridge->dev, "  IO window: %#08lx-%#08lx\n",
 		       (unsigned long)region.start,
 		       (unsigned long)region.end);
 		pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
@@ -112,7 +105,7 @@
 
 	pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
 	if (bus->resource[2]->flags & IORESOURCE_MEM) {
-		printk(KERN_INFO "  PREFETCH window: 0x%08lx-0x%08lx\n",
+		dev_info(&bridge->dev, "  PREFETCH window: %#08lx-%#08lx\n",
 		       (unsigned long)region.start,
 		       (unsigned long)region.end);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
@@ -123,7 +116,7 @@
 
 	pcibios_resource_to_bus(bridge, &region, bus->resource[3]);
 	if (bus->resource[3]->flags & IORESOURCE_MEM) {
-		printk(KERN_INFO "  MEM window: 0x%08lx-0x%08lx\n",
+		dev_info(&bridge->dev, "  MEM window: %#08lx-%#08lx\n",
 		       (unsigned long)region.start,
 		       (unsigned long)region.end);
 		pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
@@ -151,7 +144,8 @@
 	struct pci_bus_region region;
 	u32 l, bu, lu, io_upper16;
 
-	DBG(KERN_INFO "PCI: Bridge: %s\n", pci_name(bridge));
+	dev_info(&bridge->dev, "PCI bridge, secondary bus %04x:%02x\n",
+		 pci_domain_nr(bus), bus->number);
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
@@ -162,7 +156,7 @@
 		l |= region.end & 0xf000;
 		/* Set up upper 16 bits of I/O base/limit. */
 		io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
-		DBG(KERN_INFO "  IO window: %04lx-%04lx\n",
+		dev_info(&bridge->dev, "  IO window: %#04lx-%#04lx\n",
 		    (unsigned long)region.start,
 		    (unsigned long)region.end);
 	}
@@ -170,7 +164,7 @@
 		/* Clear upper 16 bits of I/O base/limit. */
 		io_upper16 = 0;
 		l = 0x00f0;
-		DBG(KERN_INFO "  IO window: disabled.\n");
+		dev_info(&bridge->dev, "  IO window: disabled\n");
 	}
 	/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
@@ -185,13 +179,13 @@
 	if (bus->resource[1]->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
-		DBG(KERN_INFO "  MEM window: 0x%08lx-0x%08lx\n",
+		dev_info(&bridge->dev, "  MEM window: %#08lx-%#08lx\n",
 		    (unsigned long)region.start,
 		    (unsigned long)region.end);
 	}
 	else {
 		l = 0x0000fff0;
-		DBG(KERN_INFO "  MEM window: disabled.\n");
+		dev_info(&bridge->dev, "  MEM window: disabled\n");
 	}
 	pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
 
@@ -208,13 +202,13 @@
 		l |= region.end & 0xfff00000;
 		bu = upper_32_bits(region.start);
 		lu = upper_32_bits(region.end);
-		DBG(KERN_INFO "  PREFETCH window: 0x%016llx-0x%016llx\n",
+		dev_info(&bridge->dev, "  PREFETCH window: %#016llx-%#016llx\n",
 		    (unsigned long long)region.start,
 		    (unsigned long long)region.end);
 	}
 	else {
 		l = 0x0000fff0;
-		DBG(KERN_INFO "  PREFETCH window: disabled.\n");
+		dev_info(&bridge->dev, "  PREFETCH window: disabled\n");
 	}
 	pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
 
@@ -361,9 +355,8 @@
 			align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
 			order = __ffs(align) - 20;
 			if (order > 11) {
-				printk(KERN_WARNING "PCI: region %s/%d "
-				       "too large: 0x%016llx-0x%016llx\n",
-					pci_name(dev), i,
+				dev_warn(&dev->dev, "BAR %d too large: "
+				       "%#016llx-%#016llx\n", i,
 				       (unsigned long long)r->start,
 				       (unsigned long long)r->end);
 				r->flags = 0;
@@ -529,8 +522,8 @@
 			break;
 
 		default:
-			printk(KERN_INFO "PCI: not setting up bridge %s "
-			       "for bus %d\n", pci_name(dev), b->number);
+			dev_info(&dev->dev, "not setting up bridge for bus "
+				 "%04x:%02x\n", pci_domain_nr(b), b->number);
 			break;
 		}
 	}
diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
index 05ca2ed..aa795fd 100644
--- a/drivers/pci/setup-irq.c
+++ b/drivers/pci/setup-irq.c
@@ -47,8 +47,7 @@
 	}
 	dev->irq = irq;
 
-	pr_debug("PCI: fixup irq: (%s) got %d\n",
-		kobject_name(&dev->dev.kobj), dev->irq);
+	dev_dbg(&dev->dev, "fixup irq: got %d\n", dev->irq);
 
 	/* Always tell the device, so the driver knows what is
 	   the real IRQ to use; the device does not use it. */
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 7d35cdf..1a5fc83 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -26,8 +26,7 @@
 #include "pci.h"
 
 
-void
-pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
+void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
 {
 	struct pci_bus_region region;
 	u32 new, check, mask;
@@ -43,20 +42,20 @@
 	/*
 	 * Ignore non-moveable resources.  This might be legacy resources for
 	 * which no functional BAR register exists or another important
-	 * system resource we should better not move around in system address
-	 * space.
+	 * system resource we shouldn't move around.
 	 */
 	if (res->flags & IORESOURCE_PCI_FIXED)
 		return;
 
 	pcibios_resource_to_bus(dev, &region, res);
 
-	pr_debug("  got res [%llx:%llx] bus [%llx:%llx] flags %lx for "
-		 "BAR %d of %s\n", (unsigned long long)res->start,
+	dev_dbg(&dev->dev, "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] "
+		"flags %#lx\n", resno,
+		 (unsigned long long)res->start,
 		 (unsigned long long)res->end,
 		 (unsigned long long)region.start,
 		 (unsigned long long)region.end,
-		 (unsigned long)res->flags, resno, pci_name(dev));
+		 (unsigned long)res->flags);
 
 	new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
 	if (res->flags & IORESOURCE_IO)
@@ -81,9 +80,8 @@
 	pci_read_config_dword(dev, reg, &check);
 
 	if ((new ^ check) & mask) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resno,
-		       new, check);
+		dev_err(&dev->dev, "BAR %d: error updating (%#08x != %#08x)\n",
+			resno, new, check);
 	}
 
 	if ((new & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
@@ -92,15 +90,14 @@
 		pci_write_config_dword(dev, reg + 4, new);
 		pci_read_config_dword(dev, reg + 4, &check);
 		if (check != new) {
-			printk(KERN_ERR "PCI: Error updating region "
-			       "%s/%d (high %08x != %08x)\n",
-			       pci_name(dev), resno, new, check);
+			dev_err(&dev->dev, "BAR %d: error updating "
+			       "(high %#08x != %#08x)\n", resno, new, check);
 		}
 	}
 	res->flags &= ~IORESOURCE_UNSET;
-	pr_debug("PCI: moved device %s resource %d (%lx) to %x\n",
-		pci_name(dev), resno, res->flags,
-		new & ~PCI_REGION_FLAG_MASK);
+	dev_dbg(&dev->dev, "BAR %d: moved to bus [%#llx-%#llx] flags %#lx\n",
+		resno, (unsigned long long)region.start,
+		(unsigned long long)region.end, res->flags);
 }
 
 int pci_claim_resource(struct pci_dev *dev, int resource)
@@ -117,10 +114,11 @@
 		err = insert_resource(root, res);
 
 	if (err) {
-		printk(KERN_ERR "PCI: %s region %d of %s %s [%llx:%llx]\n",
-			root ? "Address space collision on" :
-				"No parent found for",
-			resource, dtype, pci_name(dev),
+		dev_err(&dev->dev, "BAR %d: %s of %s [%#llx-%#llx]\n",
+			resource,
+			root ? "address space collision on" :
+				"no parent found for",
+			dtype,
 			(unsigned long long)res->start,
 			(unsigned long long)res->end);
 	}
@@ -140,11 +138,10 @@
 
 	align = resource_alignment(res);
 	if (!align) {
-		printk(KERN_ERR "PCI: Cannot allocate resource (bogus "
-			"alignment) %d [%llx:%llx] (flags %lx) of %s\n",
+		dev_err(&dev->dev, "BAR %d: can't allocate resource (bogus "
+			"alignment) [%#llx-%#llx] flags %#lx\n",
 			resno, (unsigned long long)res->start,
-			(unsigned long long)res->end, res->flags,
-			pci_name(dev));
+			(unsigned long long)res->end, res->flags);
 		return -EINVAL;
 	}
 
@@ -165,11 +162,11 @@
 	}
 
 	if (ret) {
-		printk(KERN_ERR "PCI: Failed to allocate %s resource "
-			"#%d:%llx@%llx for %s\n",
+		dev_err(&dev->dev, "BAR %d: can't allocate %s resource "
+			"[%#llx-%#llx]\n", resno,
 			res->flags & IORESOURCE_IO ? "I/O" : "mem",
-			resno, (unsigned long long)size,
-			(unsigned long long)res->start, pci_name(dev));
+			(unsigned long long)res->start,
+			(unsigned long long)res->end);
 	} else {
 		res->flags &= ~IORESOURCE_STARTALIGN;
 		if (resno < PCI_BRIDGE_RESOURCES)
@@ -205,11 +202,11 @@
 	}
 
 	if (ret) {
-		printk(KERN_ERR "PCI: Failed to allocate %s resource "
-				"#%d:%llx@%llx for %s\n",
+		dev_err(&dev->dev, "BAR %d: can't allocate %s resource "
+			"[%#llx-%#llx\n]", resno,
 			res->flags & IORESOURCE_IO ? "I/O" : "mem",
-			resno, (unsigned long long)(res->end - res->start + 1),
-			(unsigned long long)res->start, pci_name(dev));
+			(unsigned long long)res->start,
+			(unsigned long long)res->end);
 	} else if (resno < PCI_BRIDGE_RESOURCES) {
 		pci_update_resource(dev, res, resno);
 	}
@@ -239,11 +236,10 @@
 
 		r_align = resource_alignment(r);
 		if (!r_align) {
-			printk(KERN_WARNING "PCI: bogus alignment of resource "
-				"%d [%llx:%llx] (flags %lx) of %s\n",
+			dev_warn(&dev->dev, "BAR %d: bogus alignment "
+				"[%#llx-%#llx] flags %#lx\n",
 				i, (unsigned long long)r->start,
-				(unsigned long long)r->end, r->flags,
-				pci_name(dev));
+				(unsigned long long)r->end, r->flags);
 			continue;
 		}
 		for (list = head; ; list = list->next) {
@@ -291,7 +287,7 @@
 
 		if (!r->parent) {
 			dev_err(&dev->dev, "device not available because of "
-				"BAR %d [%llx:%llx] collisions\n", i,
+				"BAR %d [%#llx-%#llx] collisions\n", i,
 				(unsigned long long) r->start,
 				(unsigned long long) r->end);
 			return -EINVAL;
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
new file mode 100644
index 0000000..7e5b85c
--- /dev/null
+++ b/drivers/pci/slot.c
@@ -0,0 +1,233 @@
+/*
+ * drivers/pci/slot.c
+ * Copyright (C) 2006 Matthew Wilcox <matthew@wil.cx>
+ * Copyright (C) 2006-2008 Hewlett-Packard Development Company, L.P.
+ * 	Alex Chiang <achiang@hp.com>
+ */
+
+#include <linux/kobject.h>
+#include <linux/pci.h>
+#include <linux/err.h>
+#include "pci.h"
+
+struct kset *pci_slots_kset;
+EXPORT_SYMBOL_GPL(pci_slots_kset);
+
+static ssize_t pci_slot_attr_show(struct kobject *kobj,
+					struct attribute *attr, char *buf)
+{
+	struct pci_slot *slot = to_pci_slot(kobj);
+	struct pci_slot_attribute *attribute = to_pci_slot_attr(attr);
+	return attribute->show ? attribute->show(slot, buf) : -EIO;
+}
+
+static ssize_t pci_slot_attr_store(struct kobject *kobj,
+			struct attribute *attr, const char *buf, size_t len)
+{
+	struct pci_slot *slot = to_pci_slot(kobj);
+	struct pci_slot_attribute *attribute = to_pci_slot_attr(attr);
+	return attribute->store ? attribute->store(slot, buf, len) : -EIO;
+}
+
+static struct sysfs_ops pci_slot_sysfs_ops = {
+	.show = pci_slot_attr_show,
+	.store = pci_slot_attr_store,
+};
+
+static ssize_t address_read_file(struct pci_slot *slot, char *buf)
+{
+	if (slot->number == 0xff)
+		return sprintf(buf, "%04x:%02x\n",
+				pci_domain_nr(slot->bus),
+				slot->bus->number);
+	else
+		return sprintf(buf, "%04x:%02x:%02x\n",
+				pci_domain_nr(slot->bus),
+				slot->bus->number,
+				slot->number);
+}
+
+static void pci_slot_release(struct kobject *kobj)
+{
+	struct pci_slot *slot = to_pci_slot(kobj);
+
+	pr_debug("%s: releasing pci_slot on %x:%d\n", __func__,
+		 slot->bus->number, slot->number);
+
+	list_del(&slot->list);
+
+	kfree(slot);
+}
+
+static struct pci_slot_attribute pci_slot_attr_address =
+	__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+
+static struct attribute *pci_slot_default_attrs[] = {
+	&pci_slot_attr_address.attr,
+	NULL,
+};
+
+static struct kobj_type pci_slot_ktype = {
+	.sysfs_ops = &pci_slot_sysfs_ops,
+	.release = &pci_slot_release,
+	.default_attrs = pci_slot_default_attrs,
+};
+
+/**
+ * pci_create_slot - create or increment refcount for physical PCI slot
+ * @parent: struct pci_bus of parent bridge
+ * @slot_nr: PCI_SLOT(pci_dev->devfn) or -1 for placeholder
+ * @name: user visible string presented in /sys/bus/pci/slots/<name>
+ *
+ * PCI slots have first class attributes such as address, speed, width,
+ * and a &struct pci_slot is used to manage them. This interface will
+ * either return a new &struct pci_slot to the caller, or if the pci_slot
+ * already exists, its refcount will be incremented.
+ *
+ * Slots are uniquely identified by a @pci_bus, @slot_nr, @name tuple.
+ *
+ * Placeholder slots:
+ * In most cases, @pci_bus, @slot_nr will be sufficient to uniquely identify
+ * a slot. There is one notable exception - pSeries (rpaphp), where the
+ * @slot_nr cannot be determined until a device is actually inserted into
+ * the slot. In this scenario, the caller may pass -1 for @slot_nr.
+ *
+ * The following semantics are imposed when the caller passes @slot_nr ==
+ * -1. First, the check for existing %struct pci_slot is skipped, as the
+ * caller may know about several unpopulated slots on a given %struct
+ * pci_bus, and each slot would have a @slot_nr of -1.  Uniqueness for
+ * these slots is then determined by the @name parameter. We expect
+ * kobject_init_and_add() to warn us if the caller attempts to create
+ * multiple slots with the same name. The other change in semantics is
+ * user-visible, which is the 'address' parameter presented in sysfs will
+ * consist solely of a dddd:bb tuple, where dddd is the PCI domain of the
+ * %struct pci_bus and bb is the bus number. In other words, the devfn of
+ * the 'placeholder' slot will not be displayed.
+ */
+
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+				 const char *name)
+{
+	struct pci_slot *slot;
+	int err;
+
+	down_write(&pci_bus_sem);
+
+	if (slot_nr == -1)
+		goto placeholder;
+
+	/* If we've already created this slot, bump refcount and return. */
+	list_for_each_entry(slot, &parent->slots, list) {
+		if (slot->number == slot_nr) {
+			kobject_get(&slot->kobj);
+			pr_debug("%s: inc refcount to %d on %04x:%02x:%02x\n",
+				 __func__,
+				 atomic_read(&slot->kobj.kref.refcount),
+				 pci_domain_nr(parent), parent->number,
+				 slot_nr);
+			goto out;
+		}
+	}
+
+placeholder:
+	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+	if (!slot) {
+		slot = ERR_PTR(-ENOMEM);
+		goto out;
+	}
+
+	slot->bus = parent;
+	slot->number = slot_nr;
+
+	slot->kobj.kset = pci_slots_kset;
+	err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL,
+				   "%s", name);
+	if (err) {
+		printk(KERN_ERR "Unable to register kobject %s\n", name);
+		goto err;
+	}
+
+	INIT_LIST_HEAD(&slot->list);
+	list_add(&slot->list, &parent->slots);
+
+	/* Don't care if debug printk has a -1 for slot_nr */
+	pr_debug("%s: created pci_slot on %04x:%02x:%02x\n",
+		 __func__, pci_domain_nr(parent), parent->number, slot_nr);
+
+ out:
+	up_write(&pci_bus_sem);
+	return slot;
+ err:
+	kfree(slot);
+	slot = ERR_PTR(err);
+	goto out;
+}
+EXPORT_SYMBOL_GPL(pci_create_slot);
+
+/**
+ * pci_update_slot_number - update %struct pci_slot -> number
+ * @slot - %struct pci_slot to update
+ * @slot_nr - new number for slot
+ *
+ * The primary purpose of this interface is to allow callers who earlier
+ * created a placeholder slot in pci_create_slot() by passing a -1 as
+ * slot_nr, to update their %struct pci_slot with the correct @slot_nr.
+ */
+
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr)
+{
+	int name_count = 0;
+	struct pci_slot *tmp;
+
+	down_write(&pci_bus_sem);
+
+	list_for_each_entry(tmp, &slot->bus->slots, list) {
+		WARN_ON(tmp->number == slot_nr);
+		if (!strcmp(kobject_name(&tmp->kobj), kobject_name(&slot->kobj)))
+			name_count++;
+	}
+
+	if (name_count > 1)
+		printk(KERN_WARNING "pci_update_slot_number found %d slots with the same name: %s\n", name_count, kobject_name(&slot->kobj));
+
+	slot->number = slot_nr;
+	up_write(&pci_bus_sem);
+}
+EXPORT_SYMBOL_GPL(pci_update_slot_number);
+
+/**
+ * pci_destroy_slot - decrement refcount for physical PCI slot
+ * @slot: struct pci_slot to decrement
+ *
+ * %struct pci_slot is refcounted, so destroying them is really easy; we
+ * just call kobject_put on its kobj and let our release methods do the
+ * rest.
+ */
+
+void pci_destroy_slot(struct pci_slot *slot)
+{
+	pr_debug("%s: dec refcount to %d on %04x:%02x:%02x\n", __func__,
+		 atomic_read(&slot->kobj.kref.refcount) - 1,
+		 pci_domain_nr(slot->bus), slot->bus->number, slot->number);
+
+	down_write(&pci_bus_sem);
+	kobject_put(&slot->kobj);
+	up_write(&pci_bus_sem);
+}
+EXPORT_SYMBOL_GPL(pci_destroy_slot);
+
+static int pci_slot_init(void)
+{
+	struct kset *pci_bus_kset;
+
+	pci_bus_kset = bus_get_kset(&pci_bus_type);
+	pci_slots_kset = kset_create_and_add("slots", NULL,
+						&pci_bus_kset->kobj);
+	if (!pci_slots_kset) {
+		printk(KERN_ERR "PCI: Slot initialization failure\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+subsys_initcall(pci_slot_init);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index db90a74..a5ac0bc 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -259,6 +259,7 @@
 /* Wakeup Management */
 struct acpi_device_wakeup_flags {
 	u8 valid:1;		/* Can successfully enable wakeup? */
+	u8 prepared:1;		/* Has the wake-up capability been enabled? */
 	u8 run_wake:1;		/* Run-Wake GPE devices */
 };
 
@@ -335,6 +336,8 @@
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_get_power(acpi_handle handle, int *state);
 int acpi_bus_set_power(acpi_handle handle, int state);
+bool acpi_bus_power_manageable(acpi_handle handle);
+bool acpi_bus_can_wakeup(acpi_handle handle);
 #ifdef CONFIG_ACPI_PROC_EVENT
 int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
 int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data);
@@ -377,6 +380,7 @@
 
 #ifdef CONFIG_PM_SLEEP
 int acpi_pm_device_sleep_state(struct device *, int *);
+int acpi_pm_device_sleep_wake(struct device *, bool);
 #else /* !CONFIG_PM_SLEEP */
 static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
 {
@@ -384,6 +388,10 @@
 		*p = ACPI_STATE_D0;
 	return ACPI_STATE_D3;
 }
+static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
 #endif /* !CONFIG_PM_SLEEP */
 
 #endif				/* CONFIG_ACPI */
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 9757a04..e5f38e5 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -87,7 +87,9 @@
    -------------------------------------------------------------------------- */
 
 #ifdef CONFIG_ACPI_POWER
-int acpi_enable_wakeup_device_power(struct acpi_device *dev);
+int acpi_device_sleep_wake(struct acpi_device *dev,
+                           int enable, int sleep_state, int dev_state);
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 int acpi_power_get_inferred_state(struct acpi_device *device);
 int acpi_power_transition(struct acpi_device *device, int state);
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index b204094..729f6b0 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -86,6 +86,12 @@
 		VMLINUX_SYMBOL(__start_pci_fixups_resume) = .;		\
 		*(.pci_fixup_resume)					\
 		VMLINUX_SYMBOL(__end_pci_fixups_resume) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .;	\
+		*(.pci_fixup_resume_early)				\
+		VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .;	\
+		VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .;		\
+		*(.pci_fixup_suspend)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .;		\
 	}								\
 									\
 	/* Built-in firmware blobs */					\
diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h
index 5b21485..80c775d 100644
--- a/include/asm-x86/pci-direct.h
+++ b/include/asm-x86/pci-direct.h
@@ -11,7 +11,11 @@
 extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
 extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
 extern void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val);
+extern void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val);
 
 extern int early_pci_allowed(void);
 
+extern unsigned int pci_early_dump_regs;
+extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
+extern void early_dump_pci_devices(void);
 #endif
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 0601075..a171776 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -235,6 +235,9 @@
 int acpi_check_mem_region(resource_size_t start, resource_size_t n,
 		      const char *name);
 
+#ifdef CONFIG_PM_SLEEP
+void __init acpi_old_suspend_ordering(void);
+#endif /* CONFIG_PM_SLEEP */
 #else	/* CONFIG_ACPI */
 
 static inline int early_acpi_boot_init(void)
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a2d04c..f71a78d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -68,6 +68,8 @@
 	int (*resume_early)(struct device *dev);
 	int (*resume)(struct device *dev);
 
+	struct pm_ext_ops *pm;
+
 	struct bus_type_private *p;
 };
 
@@ -131,6 +133,8 @@
 	int (*resume) (struct device *dev);
 	struct attribute_group **groups;
 
+	struct pm_ops *pm;
+
 	struct driver_private *p;
 };
 
@@ -197,6 +201,8 @@
 
 	int (*suspend)(struct device *dev, pm_message_t state);
 	int (*resume)(struct device *dev);
+
+	struct pm_ops *pm;
 };
 
 extern int __must_check class_register(struct class *class);
@@ -248,8 +254,11 @@
 	struct attribute_group **groups;
 	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	void (*release)(struct device *dev);
+
 	int (*suspend)(struct device *dev, pm_message_t state);
 	int (*resume)(struct device *dev);
+
+	struct pm_ops *pm;
 };
 
 /* interface for exporting device attributes */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d18b1dd..a6a088e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -17,8 +17,7 @@
 #ifndef LINUX_PCI_H
 #define LINUX_PCI_H
 
-/* Include the pci register defines */
-#include <linux/pci_regs.h>
+#include <linux/pci_regs.h>	/* The pci register defines */
 
 /*
  * The PCI interface treats multi-function devices as independent
@@ -49,12 +48,22 @@
 #include <linux/list.h>
 #include <linux/compiler.h>
 #include <linux/errno.h>
+#include <linux/kobject.h>
 #include <asm/atomic.h>
 #include <linux/device.h>
 
 /* Include the ID list */
 #include <linux/pci_ids.h>
 
+/* pci_slot represents a physical slot */
+struct pci_slot {
+	struct pci_bus *bus;		/* The bus this slot is on */
+	struct list_head list;		/* node in list of slots on this bus */
+	struct hotplug_slot *hotplug;	/* Hotplug info (migrate over time) */
+	unsigned char number;		/* PCI_SLOT(pci_dev->devfn) */
+	struct kobject kobj;
+};
+
 /* File state for mmap()s on /proc/bus/pci/X/Y */
 enum pci_mmap_state {
 	pci_mmap_io,
@@ -142,6 +151,7 @@
 
 	void		*sysdata;	/* hook for sys-specific extension */
 	struct proc_dir_entry *procent;	/* device entry in /proc/bus/pci */
+	struct pci_slot	*slot;		/* Physical slot this device is in */
 
 	unsigned int	devfn;		/* encoded device & function index */
 	unsigned short	vendor;
@@ -167,6 +177,13 @@
 	pci_power_t     current_state;  /* Current operating state. In ACPI-speak,
 					   this is D0-D3, D0 being fully functional,
 					   and D3 being off. */
+	int		pm_cap;		/* PM capability offset in the
+					   configuration space */
+	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
+					   can be generated */
+	unsigned int	d1_support:1;	/* Low power state D1 is supported */
+	unsigned int	d2_support:1;	/* Low power state D2 is supported */
+	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
 
 #ifdef CONFIG_PCIEASPM
 	struct pcie_link_state	*link_state;	/* ASPM link state. */
@@ -191,7 +208,6 @@
 	unsigned int	is_added:1;
 	unsigned int	is_busmaster:1; /* device is busmaster */
 	unsigned int	no_msi:1;	/* device may not use msi */
-	unsigned int	no_d1d2:1;   /* only allow d0 or d3 */
 	unsigned int	block_ucfg_access:1;	/* userspace config space access is blocked */
 	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
 	unsigned int 	msi_enabled:1;
@@ -267,6 +283,7 @@
 	struct list_head children;	/* list of child buses */
 	struct list_head devices;	/* list of devices on this bus */
 	struct pci_dev	*self;		/* bridge device as seen by parent */
+	struct list_head slots;		/* list of slots on this bus */
 	struct resource	*resource[PCI_BUS_NUM_RESOURCES];
 					/* address space routed to this bus */
 
@@ -328,7 +345,7 @@
 struct pci_dynids {
 	spinlock_t lock;            /* protects list, index */
 	struct list_head list;      /* for IDs added at runtime */
-	unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+	unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */
 };
 
 /* ---------------------------------------------------------------- */
@@ -390,7 +407,7 @@
 	int  (*resume_early) (struct pci_dev *dev);
 	int  (*resume) (struct pci_dev *dev);	                /* Device woken up */
 	void (*shutdown) (struct pci_dev *dev);
-
+	struct pm_ext_ops *pm;
 	struct pci_error_handlers *err_handler;
 	struct device_driver	driver;
 	struct pci_dynids dynids;
@@ -489,6 +506,10 @@
 			       struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
 				int busnr);
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+				 const char *name);
+void pci_destroy_slot(struct pci_slot *slot);
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr);
 int pci_scan_slot(struct pci_bus *bus, int devfn);
 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
@@ -618,6 +639,8 @@
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_prepare_to_sleep(struct pci_dev *dev);
+int pci_back_from_sleep(struct pci_dev *dev);
 
 /* Functions for PCI Hotplug drivers to use */
 int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
@@ -839,6 +862,11 @@
 	return -EIO;
 }
 
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return -EIO;
+}
+
 static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
 					unsigned int size)
 {
@@ -977,9 +1005,9 @@
 /* If you want to know what to call your pci_dev, ask this function.
  * Again, it's a wrapper around the generic device.
  */
-static inline char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(struct pci_dev *pdev)
 {
-	return pdev->dev.bus_id;
+	return dev_name(&pdev->dev);
 }
 
 
@@ -1014,7 +1042,9 @@
 	pci_fixup_header,	/* After reading configuration header */
 	pci_fixup_final,	/* Final phase of device fixups */
 	pci_fixup_enable,	/* pci_enable_device() time */
-	pci_fixup_resume,	/* pci_enable_device() time */
+	pci_fixup_resume,	/* pci_device_resume() */
+	pci_fixup_suspend,	/* pci_device_suspend */
+	pci_fixup_resume_early, /* pci_device_resume_early() */
 };
 
 /* Anonymous variables would be nice... */
@@ -1036,6 +1066,12 @@
 #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook)			\
 	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
 			resume##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
+			resume_early##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
+			suspend##vendor##device##hook, vendor, device, hook)
 
 
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
@@ -1060,7 +1096,10 @@
 extern unsigned long pci_cardbus_io_size;
 extern unsigned long pci_cardbus_mem_size;
 
-extern int pcibios_add_platform_entries(struct pci_dev *dev);
+int pcibios_add_platform_entries(struct pci_dev *dev);
+void pcibios_disable_device(struct pci_dev *dev);
+int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+				 enum pcie_reset_state state);
 
 #ifdef CONFIG_PCI_MMCONFIG
 extern void __init pci_mmcfg_early_init(void);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8f67e8f..a08cd06 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -95,9 +95,6 @@
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
- * @get_address: Called to get pci address of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  * @get_max_bus_speed: Called to get the max bus speed for a slot.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
@@ -120,7 +117,6 @@
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
-	int (*get_address)		(struct hotplug_slot *slot, u32 *value);
 	int (*get_max_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 	int (*get_cur_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 };
@@ -140,7 +136,6 @@
 	u8	attention_status;
 	u8	latch_status;
 	u8	adapter_status;
-	u32	address;
 	enum pci_bus_speed	max_bus_speed;
 	enum pci_bus_speed	cur_bus_speed;
 };
@@ -166,15 +161,14 @@
 
 	/* Variables below this are for use only by the hotplug pci core. */
 	struct list_head		slot_list;
-	struct kobject			kobj;
+	struct pci_slot			*pci_slot;
 };
 #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
 
-extern int pci_hp_register		(struct hotplug_slot *slot);
-extern int pci_hp_deregister		(struct hotplug_slot *slot);
+extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr);
+extern int pci_hp_deregister(struct hotplug_slot *slot);
 extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
 						 struct hotplug_slot_info *info);
-extern struct kset *pci_hotplug_slots_kset;
 
 /* PCI Setting Record (Type 0) */
 struct hpp_type0 {
@@ -227,9 +221,9 @@
 #include <acpi/acpi.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/actypes.h>
-extern acpi_status acpi_run_oshp(acpi_handle handle);
 extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 				struct hotplug_params *hpp);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
 int acpi_root_bridge(acpi_handle handle);
 #endif
 #endif
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index c0c1223..19958b9 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -231,6 +231,7 @@
 #define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
 #define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
 #define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
+#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
 #define PCI_PM_CTRL		4	/* PM control and status register */
 #define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
 #define  PCI_PM_CTRL_NO_SOFT_RESET	0x0004	/* No reset for D3hot->D0 */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 3261681..95ac21a 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -53,6 +53,7 @@
 	int (*suspend_late)(struct platform_device *, pm_message_t state);
 	int (*resume_early)(struct platform_device *);
 	int (*resume)(struct platform_device *);
+	struct pm_ext_ops *pm;
 	struct device_driver driver;
 };
 
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 39a7ee8..4ad9de9 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -112,7 +112,9 @@
 	int event;
 } pm_message_t;
 
-/*
+/**
+ * struct pm_ops - device PM callbacks
+ *
  * Several driver power state transitions are externally visible, affecting
  * the state of pending I/O queues and (for drivers that touch hardware)
  * interrupts, wakeups, DMA, and other hardware state.  There may also be
@@ -120,6 +122,284 @@
  * to the rest of the driver stack (such as a driver that's ON gating off
  * clocks which are not in active use).
  *
+ * The externally visible transitions are handled with the help of the following
+ * callbacks included in this structure:
+ *
+ * @prepare: Prepare the device for the upcoming transition, but do NOT change
+ *	its hardware state.  Prevent new children of the device from being
+ *	registered after @prepare() returns (the driver's subsystem and
+ *	generally the rest of the kernel is supposed to prevent new calls to the
+ *	probe method from being made too once @prepare() has succeeded).  If
+ *	@prepare() detects a situation it cannot handle (e.g. registration of a
+ *	child already in progress), it may return -EAGAIN, so that the PM core
+ *	can execute it once again (e.g. after the new child has been registered)
+ *	to recover from the race condition.  This method is executed for all
+ *	kinds of suspend transitions and is followed by one of the suspend
+ *	callbacks: @suspend(), @freeze(), or @poweroff().
+ *	The PM core executes @prepare() for all devices before starting to
+ *	execute suspend callbacks for any of them, so drivers may assume all of
+ *	the other devices to be present and functional while @prepare() is being
+ *	executed.  In particular, it is safe to make GFP_KERNEL memory
+ *	allocations from within @prepare().  However, drivers may NOT assume
+ *	anything about the availability of the user space at that time and it
+ *	is not correct to request firmware from within @prepare() (it's too
+ *	late to do that).  [To work around this limitation, drivers may
+ *	register suspend and hibernation notifiers that are executed before the
+ *	freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare().  This method is executed for
+ *	all kinds of resume transitions, following one of the resume callbacks:
+ *	@resume(), @thaw(), @restore().  Also called if the state transition
+ *	fails before the driver's suspend callback (@suspend(), @freeze(),
+ *	@poweroff()) can be executed (e.g. if the suspend callback fails for one
+ *	of the other devices that the PM core has unsuccessfully attempted to
+ *	suspend earlier).
+ *	The PM core executes @complete() after it has executed the appropriate
+ *	resume callback for all devices.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ *	contents of main memory are preserved.  Quiesce the device, put it into
+ *	a low power state appropriate for the upcoming system state (such as
+ *	PCI_D3hot), and enable wakeup events as appropriate.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ *	contents of main memory were preserved.  Put the device into the
+ *	appropriate state, according to the information saved in memory by the
+ *	preceding @suspend().  The driver starts working again, responding to
+ *	hardware events and software requests.  The hardware may have gone
+ *	through a power-off reset, or it may have maintained state from the
+ *	previous suspend() which the driver may rely on while resuming.  On most
+ *	platforms, there are no restrictions on availability of resources like
+ *	clocks during @resume().
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ *	Quiesce operations so that a consistent image can be created, but do NOT
+ *	otherwise put the device into a low power device state and do NOT emit
+ *	system wakeup events.  Save in main memory the device settings to be
+ *	used by @restore() during the subsequent resume from hibernation or by
+ *	the subsequent @thaw(), if the creation of the image or the restoration
+ *	of main memory contents from it fails.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ *	if the creation of the image fails.  Also executed after a failing
+ *	attempt to restore the contents of main memory from such an image.
+ *	Undo the changes made by the preceding @freeze(), so the device can be
+ *	operated in the same way as immediately before the call to @freeze().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ *	Quiesce the device, put it into a low power state appropriate for the
+ *	upcoming system state (such as PCI_D3hot), and enable wakeup events as
+ *	appropriate.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ *	memory from a hibernation image.  Driver starts working again,
+ *	responding to hardware events and software requests.  Drivers may NOT
+ *	make ANY assumptions about the hardware state right prior to @restore().
+ *	On most platforms, there are no restrictions on availability of
+ *	resources like clocks during @restore().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), and @restore(), do not cause the PM core to abort the resume
+ * transition during which they are returned.  The error codes returned in
+ * that cases are only printed by the PM core to the system logs for debugging
+ * purposes.  Still, it is recommended that drivers only return error codes
+ * from their resume methods in case of an unrecoverable failure (i.e. when the
+ * device being handled refuses to resume and becomes unusable) to allow us to
+ * modify the PM core in the future, so that it can avoid attempting to handle
+ * devices that failed to resume and their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed.  However, it is not allowed to unregister a device from within any
+ * of its own callbacks.
+ */
+
+struct pm_ops {
+	int (*prepare)(struct device *dev);
+	void (*complete)(struct device *dev);
+	int (*suspend)(struct device *dev);
+	int (*resume)(struct device *dev);
+	int (*freeze)(struct device *dev);
+	int (*thaw)(struct device *dev);
+	int (*poweroff)(struct device *dev);
+	int (*restore)(struct device *dev);
+};
+
+/**
+ * struct pm_ext_ops - extended device PM callbacks
+ *
+ * Some devices require certain operations related to suspend and hibernation
+ * to be carried out with interrupts disabled.  Thus, 'struct pm_ext_ops' below
+ * is defined, adding callbacks to be executed with interrupts disabled to
+ * 'struct pm_ops'.
+ *
+ * The following callbacks included in 'struct pm_ext_ops' are executed with
+ * the nonboot CPUs switched off and with interrupts disabled on the only
+ * functional CPU.  They also are executed with the PM core list of devices
+ * locked, so they must NOT unregister any devices.
+ *
+ * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
+ *	actions required for suspending the device that need interrupts to be
+ *	disabled
+ *
+ * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
+ *	actions required for resuming the device that need interrupts to be
+ *	disabled
+ *
+ * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
+ *	actions required for freezing the device that need interrupts to be
+ *	disabled
+ *
+ * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
+ *	actions required for thawing the device that need interrupts to be
+ *	disabled
+ *
+ * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
+ *	actions required for handling the device that need interrupts to be
+ *	disabled
+ *
+ * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
+ *	actions required for restoring the operations of the device that need
+ *	interrupts to be disabled
+ *
+ * All of the above callbacks return error codes, but the error codes returned
+ * by the resume operations, @resume_noirq(), @thaw_noirq(), and
+ * @restore_noirq(), do not cause the PM core to abort the resume transition
+ * during which they are returned.  The error codes returned in that cases are
+ * only printed by the PM core to the system logs for debugging purposes.
+ * Still, as stated above, it is recommended that drivers only return error
+ * codes from their resume methods if the device being handled fails to resume
+ * and is not usable any more.
+ */
+
+struct pm_ext_ops {
+	struct pm_ops base;
+	int (*suspend_noirq)(struct device *dev);
+	int (*resume_noirq)(struct device *dev);
+	int (*freeze_noirq)(struct device *dev);
+	int (*thaw_noirq)(struct device *dev);
+	int (*poweroff_noirq)(struct device *dev);
+	int (*restore_noirq)(struct device *dev);
+};
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON		No transition.
+ *
+ * FREEZE 	System is going to hibernate, call ->prepare() and ->freeze()
+ *		for all devices.
+ *
+ * SUSPEND	System is going to suspend, call ->prepare() and ->suspend()
+ *		for all devices.
+ *
+ * HIBERNATE	Hibernation image has been saved, call ->prepare() and
+ *		->poweroff() for all devices.
+ *
+ * QUIESCE	Contents of main memory are going to be restored from a (loaded)
+ *		hibernation image, call ->prepare() and ->freeze() for all
+ *		devices.
+ *
+ * RESUME	System is resuming, call ->resume() and ->complete() for all
+ *		devices.
+ *
+ * THAW		Hibernation image has been created, call ->thaw() and
+ *		->complete() for all devices.
+ *
+ * RESTORE	Contents of main memory have been restored from a hibernation
+ *		image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER	Creation of a hibernation image or restoration of the main
+ *		memory contents from a hibernation image has failed, call
+ *		->thaw() and ->complete() for all devices.
+ */
+
+#define PM_EVENT_ON		0x0000
+#define PM_EVENT_FREEZE 	0x0001
+#define PM_EVENT_SUSPEND	0x0002
+#define PM_EVENT_HIBERNATE	0x0004
+#define PM_EVENT_QUIESCE	0x0008
+#define PM_EVENT_RESUME		0x0010
+#define PM_EVENT_THAW		0x0020
+#define PM_EVENT_RESTORE	0x0040
+#define PM_EVENT_RECOVER	0x0080
+
+#define PM_EVENT_SLEEP	(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+
+#define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME	((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER	((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
+
+/**
+ * Device power management states
+ *
+ * These state labels are used internally by the PM core to indicate the current
+ * status of a device with respect to the PM core operations.
+ *
+ * DPM_ON		Device is regarded as operational.  Set this way
+ *			initially and when ->complete() is about to be called.
+ *			Also set when ->prepare() fails.
+ *
+ * DPM_PREPARING	Device is going to be prepared for a PM transition.  Set
+ *			when ->prepare() is about to be called.
+ *
+ * DPM_RESUMING		Device is going to be resumed.  Set when ->resume(),
+ *			->thaw(), or ->restore() is about to be called.
+ *
+ * DPM_SUSPENDING	Device has been prepared for a power transition.  Set
+ *			when ->prepare() has just succeeded.
+ *
+ * DPM_OFF		Device is regarded as inactive.  Set immediately after
+ *			->suspend(), ->freeze(), or ->poweroff() has succeeded.
+ *			Also set when ->resume()_noirq, ->thaw_noirq(), or
+ *			->restore_noirq() is about to be called.
+ *
+ * DPM_OFF_IRQ		Device is in a "deep sleep".  Set immediately after
+ *			->suspend_noirq(), ->freeze_noirq(), or
+ *			->poweroff_noirq() has just succeeded.
+ */
+
+enum dpm_state {
+	DPM_INVALID,
+	DPM_ON,
+	DPM_PREPARING,
+	DPM_RESUMING,
+	DPM_SUSPENDING,
+	DPM_OFF,
+	DPM_OFF_IRQ,
+};
+
+struct dev_pm_info {
+	pm_message_t		power_state;
+	unsigned		can_wakeup:1;
+	unsigned		should_wakeup:1;
+	enum dpm_state		status;		/* Owned by the PM core */
+#ifdef	CONFIG_PM_SLEEP
+	struct list_head	entry;
+#endif
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
  * One transition is triggered by resume(), after a suspend() call; the
  * message is implicit:
  *
@@ -164,35 +444,13 @@
  * or from system low-power states such as standby or suspend-to-RAM.
  */
 
-#define PM_EVENT_ON 0
-#define PM_EVENT_FREEZE 1
-#define PM_EVENT_SUSPEND 2
-#define PM_EVENT_HIBERNATE 4
-#define PM_EVENT_PRETHAW 8
-
-#define PM_EVENT_SLEEP	(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
-
-#define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
-#define PMSG_PRETHAW	((struct pm_message){ .event = PM_EVENT_PRETHAW, })
-#define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
-#define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
-#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
-
-struct dev_pm_info {
-	pm_message_t		power_state;
-	unsigned		can_wakeup:1;
-	unsigned		should_wakeup:1;
-	bool			sleeping:1;	/* Owned by the PM core */
-#ifdef	CONFIG_PM_SLEEP
-	struct list_head	entry;
-#endif
-};
-
-extern int device_power_down(pm_message_t state);
-extern void device_power_up(void);
-extern void device_resume(void);
-
 #ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void device_power_up(pm_message_t state);
+extern void device_resume(pm_message_t state);
+
+extern void device_pm_unlock(void);
+extern int device_power_down(pm_message_t state);
 extern int device_suspend(pm_message_t state);
 extern int device_prepare_suspend(pm_message_t state);
 
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index f0d0b2c..0aae777 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -35,6 +35,11 @@
 	dev->power.can_wakeup = dev->power.should_wakeup = !!val;
 }
 
+static inline void device_set_wakeup_capable(struct device *dev, int val)
+{
+	dev->power.can_wakeup = !!val;
+}
+
 static inline int device_can_wakeup(struct device *dev)
 {
 	return dev->power.can_wakeup;
@@ -47,21 +52,7 @@
 
 static inline int device_may_wakeup(struct device *dev)
 {
-	return dev->power.can_wakeup & dev->power.should_wakeup;
-}
-
-/*
- * Platform hook to activate device wakeup capability, if that's not already
- * handled by enable_irq_wake() etc.
- * Returns zero on success, else negative errno
- */
-extern int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
-	if (platform_enable_wakeup)
-		return (*platform_enable_wakeup)(dev, is_on);
-	return 0;
+	return dev->power.can_wakeup && dev->power.should_wakeup;
 }
 
 #else /* !CONFIG_PM */
@@ -72,6 +63,8 @@
 	dev->power.can_wakeup = !!val;
 }
 
+static inline void device_set_wakeup_capable(struct device *dev, int val) { }
+
 static inline int device_can_wakeup(struct device *dev)
 {
 	return dev->power.can_wakeup;
@@ -80,11 +73,6 @@
 #define device_set_wakeup_enable(dev, val)	do {} while (0)
 #define device_may_wakeup(dev)			0
 
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
-	return 0;
-}
-
 #endif /* !CONFIG_PM */
 
 #endif /* _LINUX_PM_WAKEUP_H */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index a697742..e8e6915 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -86,6 +86,11 @@
  *	that implement @begin(), but platforms implementing @begin() should
  *	also provide a @end() which cleans up transitions aborted before
  *	@enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ *	Called by the PM core if the suspending of devices fails.
+ *	This callback is optional and should only be implemented by platforms
+ *	which require special recovery actions in that situation.
  */
 struct platform_suspend_ops {
 	int (*valid)(suspend_state_t state);
@@ -94,6 +99,7 @@
 	int (*enter)(suspend_state_t state);
 	void (*finish)(void);
 	void (*end)(void);
+	void (*recover)(void);
 };
 
 #ifdef CONFIG_SUSPEND
@@ -149,7 +155,7 @@
  * The methods in this structure allow a platform to carry out special
  * operations required by it during a hibernation transition.
  *
- * All the methods below must be implemented.
+ * All the methods below, except for @recover(), must be implemented.
  *
  * @begin: Tell the platform driver that we're starting hibernation.
  *	Called right after shrinking memory and before freezing devices.
@@ -189,6 +195,11 @@
  * @restore_cleanup: Clean up after a failing image restoration.
  *	Called right after the nonboot CPUs have been enabled and before
  *	thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ *	Called by the PM core if the suspending of devices during hibernation
+ *	fails.  This callback is optional and should only be implemented by
+ *	platforms which require special recovery actions in that situation.
  */
 struct platform_hibernation_ops {
 	int (*begin)(void);
@@ -200,6 +211,7 @@
 	void (*leave)(void);
 	int (*pre_restore)(void);
 	void (*restore_cleanup)(void);
+	void (*recover)(void);
 };
 
 #ifdef CONFIG_HIBERNATION
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 14a656c..f011e08 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -180,6 +180,17 @@
 }
 
 /**
+ *	platform_recover - recover the platform from a failure to suspend
+ *	devices.
+ */
+
+static void platform_recover(int platform_mode)
+{
+	if (platform_mode && hibernation_ops && hibernation_ops->recover)
+		hibernation_ops->recover();
+}
+
+/**
  *	create_image - freeze devices that need to be frozen with interrupts
  *	off, create the hibernation image and thaw those devices.  Control
  *	reappears in this routine after a restore.
@@ -193,6 +204,7 @@
 	if (error)
 		return error;
 
+	device_pm_lock();
 	local_irq_disable();
 	/* At this point, device_suspend() has been called, but *not*
 	 * device_power_down(). We *must* call device_power_down() now.
@@ -224,9 +236,11 @@
 	/* NOTE:  device_power_up() is just a resume() for devices
 	 * that suspended with irqs off ... no overall powerup.
 	 */
-	device_power_up();
+	device_power_up(in_suspend ?
+		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
  Enable_irqs:
 	local_irq_enable();
+	device_pm_unlock();
 	return error;
 }
 
@@ -255,10 +269,10 @@
 	suspend_console();
 	error = device_suspend(PMSG_FREEZE);
 	if (error)
-		goto Resume_console;
+		goto Recover_platform;
 
 	if (hibernation_test(TEST_DEVICES))
-		goto Resume_devices;
+		goto Recover_platform;
 
 	error = platform_pre_snapshot(platform_mode);
 	if (error || hibernation_test(TEST_PLATFORM))
@@ -280,12 +294,16 @@
  Finish:
 	platform_finish(platform_mode);
  Resume_devices:
-	device_resume();
- Resume_console:
+	device_resume(in_suspend ?
+		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 	resume_console();
  Close:
 	platform_end(platform_mode);
 	return error;
+
+ Recover_platform:
+	platform_recover(platform_mode);
+	goto Resume_devices;
 }
 
 /**
@@ -300,8 +318,9 @@
 {
 	int error;
 
+	device_pm_lock();
 	local_irq_disable();
-	error = device_power_down(PMSG_PRETHAW);
+	error = device_power_down(PMSG_QUIESCE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting resume\n");
@@ -329,9 +348,10 @@
 	swsusp_free();
 	restore_processor_state();
 	touch_softlockup_watchdog();
-	device_power_up();
+	device_power_up(PMSG_RECOVER);
  Enable_irqs:
 	local_irq_enable();
+	device_pm_unlock();
 	return error;
 }
 
@@ -350,7 +370,7 @@
 
 	pm_prepare_console();
 	suspend_console();
-	error = device_suspend(PMSG_PRETHAW);
+	error = device_suspend(PMSG_QUIESCE);
 	if (error)
 		goto Finish;
 
@@ -362,7 +382,7 @@
 		enable_nonboot_cpus();
 	}
 	platform_restore_cleanup(platform_mode);
-	device_resume();
+	device_resume(PMSG_RECOVER);
  Finish:
 	resume_console();
 	pm_restore_console();
@@ -392,8 +412,11 @@
 
 	suspend_console();
 	error = device_suspend(PMSG_HIBERNATE);
-	if (error)
-		goto Resume_console;
+	if (error) {
+		if (hibernation_ops->recover)
+			hibernation_ops->recover();
+		goto Resume_devices;
+	}
 
 	error = hibernation_ops->prepare();
 	if (error)
@@ -403,6 +426,7 @@
 	if (error)
 		goto Finish;
 
+	device_pm_lock();
 	local_irq_disable();
 	error = device_power_down(PMSG_HIBERNATE);
 	if (!error) {
@@ -411,6 +435,7 @@
 		while (1);
 	}
 	local_irq_enable();
+	device_pm_unlock();
 
 	/*
 	 * We don't need to reenable the nonboot CPUs or resume consoles, since
@@ -419,8 +444,7 @@
  Finish:
 	hibernation_ops->finish();
  Resume_devices:
-	device_resume();
- Resume_console:
+	device_resume(PMSG_RESTORE);
 	resume_console();
  Close:
 	hibernation_ops->end();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 6a6d5eb..3398f46 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -228,6 +228,7 @@
 {
 	int error = 0;
 
+	device_pm_lock();
 	arch_suspend_disable_irqs();
 	BUG_ON(!irqs_disabled());
 
@@ -239,10 +240,11 @@
 	if (!suspend_test(TEST_CORE))
 		error = suspend_ops->enter(state);
 
-	device_power_up();
+	device_power_up(PMSG_RESUME);
  Done:
 	arch_suspend_enable_irqs();
 	BUG_ON(irqs_disabled());
+	device_pm_unlock();
 	return error;
 }
 
@@ -267,11 +269,11 @@
 	error = device_suspend(PMSG_SUSPEND);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to suspend\n");
-		goto Resume_console;
+		goto Recover_platform;
 	}
 
 	if (suspend_test(TEST_DEVICES))
-		goto Resume_devices;
+		goto Recover_platform;
 
 	if (suspend_ops->prepare) {
 		error = suspend_ops->prepare();
@@ -291,13 +293,17 @@
 	if (suspend_ops->finish)
 		suspend_ops->finish();
  Resume_devices:
-	device_resume();
- Resume_console:
+	device_resume(PMSG_RESUME);
 	resume_console();
  Close:
 	if (suspend_ops->end)
 		suspend_ops->end();
 	return error;
+
+ Recover_platform:
+	if (suspend_ops->recover)
+		suspend_ops->recover();
+	goto Resume_devices;
 }
 
 /**
diff --git a/lib/kobject.c b/lib/kobject.c
index 718e510..dcade05 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -439,6 +439,7 @@
 
 	return error;
 }
+EXPORT_SYMBOL_GPL(kobject_rename);
 
 /**
  * kobject_move - move object to another parent