| /* |
| * linux/drivers/char/serial_core.h |
| * |
| * Copyright (C) 2000 Deep Blue Solutions Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #ifndef LINUX_SERIAL_CORE_H |
| #define LINUX_SERIAL_CORE_H |
| |
| /* |
| * The type definitions. These are from Ted Ts'o's serial.h |
| */ |
| #define PORT_UNKNOWN 0 |
| #define PORT_8250 1 |
| #define PORT_16450 2 |
| #define PORT_16550 3 |
| #define PORT_16550A 4 |
| #define PORT_CIRRUS 5 |
| #define PORT_16650 6 |
| #define PORT_16650V2 7 |
| #define PORT_16750 8 |
| #define PORT_STARTECH 9 |
| #define PORT_16C950 10 |
| #define PORT_16654 11 |
| #define PORT_16850 12 |
| #define PORT_RSA 13 |
| #define PORT_NS16550A 14 |
| #define PORT_XSCALE 15 |
| #define PORT_MAX_8250 15 /* max port ID */ |
| |
| /* |
| * ARM specific type numbers. These are not currently guaranteed |
| * to be implemented, and will change in the future. These are |
| * separate so any additions to the old serial.c that occur before |
| * we are merged can be easily merged here. |
| */ |
| #define PORT_PXA 31 |
| #define PORT_AMBA 32 |
| #define PORT_CLPS711X 33 |
| #define PORT_SA1100 34 |
| #define PORT_UART00 35 |
| #define PORT_21285 37 |
| |
| /* Sparc type numbers. */ |
| #define PORT_SUNZILOG 38 |
| #define PORT_SUNSAB 39 |
| |
| /* NEC v850. */ |
| #define PORT_V850E_UART 40 |
| |
| /* DZ */ |
| #define PORT_DZ 47 |
| |
| /* Parisc type numbers. */ |
| #define PORT_MUX 48 |
| |
| /* Atmel AT91RM9200 SoC */ |
| #define PORT_AT91RM9200 49 |
| |
| /* Macintosh Zilog type numbers */ |
| #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ |
| #define PORT_PMAC_ZILOG 51 |
| |
| /* SH-SCI */ |
| #define PORT_SCI 52 |
| #define PORT_SCIF 53 |
| #define PORT_IRDA 54 |
| |
| /* Samsung S3C2410 SoC and derivatives thereof */ |
| #define PORT_S3C2410 55 |
| |
| /* SGI IP22 aka Indy / Challenge S / Indigo 2 */ |
| #define PORT_IP22ZILOG 56 |
| |
| /* Sharp LH7a40x -- an ARM9 SoC series */ |
| #define PORT_LH7A40X 57 |
| |
| /* PPC CPM type number */ |
| #define PORT_CPM 58 |
| |
| /* MPC52xx type numbers */ |
| #define PORT_MPC52xx 59 |
| |
| /* IBM icom */ |
| #define PORT_ICOM 60 |
| |
| /* Samsung S3C2440 SoC */ |
| #define PORT_S3C2440 61 |
| |
| /* Motorola i.MX SoC */ |
| #define PORT_IMX 62 |
| |
| /* Marvell MPSC */ |
| #define PORT_MPSC 63 |
| |
| /* TXX9 type number */ |
| #define PORT_TXX9 64 |
| |
| /* NEC VR4100 series SIU/DSIU */ |
| #define PORT_VR41XX_SIU 65 |
| #define PORT_VR41XX_DSIU 66 |
| |
| /* Samsung S3C2400 SoC */ |
| #define PORT_S3C2400 67 |
| |
| /* M32R SIO */ |
| #define PORT_M32R_SIO 68 |
| |
| /*Digi jsm */ |
| #define PORT_JSM 69 |
| |
| #define PORT_IP3106 70 |
| |
| /* Hilscher netx */ |
| #define PORT_NETX 71 |
| |
| /* SUN4V Hypervisor Console */ |
| #define PORT_SUNHV 72 |
| |
| #ifdef __KERNEL__ |
| |
| #include <linux/compiler.h> |
| #include <linux/interrupt.h> |
| #include <linux/circ_buf.h> |
| #include <linux/spinlock.h> |
| #include <linux/sched.h> |
| #include <linux/tty.h> |
| #include <linux/mutex.h> |
| |
| struct uart_port; |
| struct uart_info; |
| struct serial_struct; |
| struct device; |
| |
| /* |
| * This structure describes all the operations that can be |
| * done on the physical hardware. |
| */ |
| struct uart_ops { |
| unsigned int (*tx_empty)(struct uart_port *); |
| void (*set_mctrl)(struct uart_port *, unsigned int mctrl); |
| unsigned int (*get_mctrl)(struct uart_port *); |
| void (*stop_tx)(struct uart_port *); |
| void (*start_tx)(struct uart_port *); |
| void (*send_xchar)(struct uart_port *, char ch); |
| void (*stop_rx)(struct uart_port *); |
| void (*enable_ms)(struct uart_port *); |
| void (*break_ctl)(struct uart_port *, int ctl); |
| int (*startup)(struct uart_port *); |
| void (*shutdown)(struct uart_port *); |
| void (*set_termios)(struct uart_port *, struct termios *new, |
| struct termios *old); |
| void (*pm)(struct uart_port *, unsigned int state, |
| unsigned int oldstate); |
| int (*set_wake)(struct uart_port *, unsigned int state); |
| |
| /* |
| * Return a string describing the type of the port |
| */ |
| const char *(*type)(struct uart_port *); |
| |
| /* |
| * Release IO and memory resources used by the port. |
| * This includes iounmap if necessary. |
| */ |
| void (*release_port)(struct uart_port *); |
| |
| /* |
| * Request IO and memory resources used by the port. |
| * This includes iomapping the port if necessary. |
| */ |
| int (*request_port)(struct uart_port *); |
| void (*config_port)(struct uart_port *, int); |
| int (*verify_port)(struct uart_port *, struct serial_struct *); |
| int (*ioctl)(struct uart_port *, unsigned int, unsigned long); |
| }; |
| |
| #define UART_CONFIG_TYPE (1 << 0) |
| #define UART_CONFIG_IRQ (1 << 1) |
| |
| struct uart_icount { |
| __u32 cts; |
| __u32 dsr; |
| __u32 rng; |
| __u32 dcd; |
| __u32 rx; |
| __u32 tx; |
| __u32 frame; |
| __u32 overrun; |
| __u32 parity; |
| __u32 brk; |
| __u32 buf_overrun; |
| }; |
| |
| typedef unsigned int __bitwise__ upf_t; |
| |
| struct uart_port { |
| spinlock_t lock; /* port lock */ |
| unsigned int iobase; /* in/out[bwl] */ |
| unsigned char __iomem *membase; /* read/write[bwl] */ |
| unsigned int irq; /* irq number */ |
| unsigned int uartclk; /* base uart clock */ |
| unsigned char fifosize; /* tx fifo size */ |
| unsigned char x_char; /* xon/xoff char */ |
| unsigned char regshift; /* reg offset shift */ |
| unsigned char iotype; /* io access style */ |
| |
| #define UPIO_PORT (0) |
| #define UPIO_HUB6 (1) |
| #define UPIO_MEM (2) |
| #define UPIO_MEM32 (3) |
| #define UPIO_AU (4) /* Au1x00 type IO */ |
| |
| unsigned int read_status_mask; /* driver specific */ |
| unsigned int ignore_status_mask; /* driver specific */ |
| struct uart_info *info; /* pointer to parent info */ |
| struct uart_icount icount; /* statistics */ |
| |
| struct console *cons; /* struct console, if any */ |
| #ifdef CONFIG_SERIAL_CORE_CONSOLE |
| unsigned long sysrq; /* sysrq timeout */ |
| #endif |
| |
| upf_t flags; |
| |
| #define UPF_FOURPORT ((__force upf_t) (1 << 1)) |
| #define UPF_SAK ((__force upf_t) (1 << 2)) |
| #define UPF_SPD_MASK ((__force upf_t) (0x1030)) |
| #define UPF_SPD_HI ((__force upf_t) (0x0010)) |
| #define UPF_SPD_VHI ((__force upf_t) (0x0020)) |
| #define UPF_SPD_CUST ((__force upf_t) (0x0030)) |
| #define UPF_SPD_SHI ((__force upf_t) (0x1000)) |
| #define UPF_SPD_WARP ((__force upf_t) (0x1010)) |
| #define UPF_SKIP_TEST ((__force upf_t) (1 << 6)) |
| #define UPF_AUTO_IRQ ((__force upf_t) (1 << 7)) |
| #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11)) |
| #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13)) |
| #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) |
| #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) |
| #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) |
| #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) |
| #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) |
| #define UPF_DEAD ((__force upf_t) (1 << 30)) |
| #define UPF_IOREMAP ((__force upf_t) (1 << 31)) |
| |
| #define UPF_CHANGE_MASK ((__force upf_t) (0x17fff)) |
| #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY)) |
| |
| unsigned int mctrl; /* current modem ctrl settings */ |
| unsigned int timeout; /* character-based timeout */ |
| unsigned int type; /* port type */ |
| const struct uart_ops *ops; |
| unsigned int custom_divisor; |
| unsigned int line; /* port index */ |
| unsigned long mapbase; /* for ioremap */ |
| struct device *dev; /* parent device */ |
| unsigned char hub6; /* this should be in the 8250 driver */ |
| unsigned char unused[3]; |
| }; |
| |
| /* |
| * This is the state information which is persistent across opens. |
| * The low level driver must not to touch any elements contained |
| * within. |
| */ |
| struct uart_state { |
| unsigned int close_delay; /* msec */ |
| unsigned int closing_wait; /* msec */ |
| |
| #define USF_CLOSING_WAIT_INF (0) |
| #define USF_CLOSING_WAIT_NONE (~0U) |
| |
| int count; |
| int pm_state; |
| struct uart_info *info; |
| struct uart_port *port; |
| |
| struct mutex mutex; |
| }; |
| |
| #define UART_XMIT_SIZE PAGE_SIZE |
| |
| typedef unsigned int __bitwise__ uif_t; |
| |
| /* |
| * This is the state information which is only valid when the port |
| * is open; it may be freed by the core driver once the device has |
| * been closed. Either the low level driver or the core can modify |
| * stuff here. |
| */ |
| struct uart_info { |
| struct tty_struct *tty; |
| struct circ_buf xmit; |
| uif_t flags; |
| |
| /* |
| * Definitions for info->flags. These are _private_ to serial_core, and |
| * are specific to this structure. They may be queried by low level drivers. |
| */ |
| #define UIF_CHECK_CD ((__force uif_t) (1 << 25)) |
| #define UIF_CTS_FLOW ((__force uif_t) (1 << 26)) |
| #define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29)) |
| #define UIF_INITIALIZED ((__force uif_t) (1 << 31)) |
| |
| int blocked_open; |
| |
| struct tasklet_struct tlet; |
| |
| wait_queue_head_t open_wait; |
| wait_queue_head_t delta_msr_wait; |
| }; |
| |
| /* number of characters left in xmit buffer before we ask for more */ |
| #define WAKEUP_CHARS 256 |
| |
| struct module; |
| struct tty_driver; |
| |
| struct uart_driver { |
| struct module *owner; |
| const char *driver_name; |
| const char *dev_name; |
| const char *devfs_name; |
| int major; |
| int minor; |
| int nr; |
| struct console *cons; |
| |
| /* |
| * these are private; the low level driver should not |
| * touch these; they should be initialised to NULL |
| */ |
| struct uart_state *state; |
| struct tty_driver *tty_driver; |
| }; |
| |
| void uart_write_wakeup(struct uart_port *port); |
| |
| /* |
| * Baud rate helpers. |
| */ |
| void uart_update_timeout(struct uart_port *port, unsigned int cflag, |
| unsigned int baud); |
| unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios, |
| struct termios *old, unsigned int min, |
| unsigned int max); |
| unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud); |
| |
| /* |
| * Console helpers. |
| */ |
| struct uart_port *uart_get_console(struct uart_port *ports, int nr, |
| struct console *c); |
| void uart_parse_options(char *options, int *baud, int *parity, int *bits, |
| int *flow); |
| int uart_set_options(struct uart_port *port, struct console *co, int baud, |
| int parity, int bits, int flow); |
| struct tty_driver *uart_console_device(struct console *co, int *index); |
| void uart_console_write(struct uart_port *port, const char *s, |
| unsigned int count, |
| void (*putchar)(struct uart_port *, int)); |
| |
| /* |
| * Port/driver registration/removal |
| */ |
| int uart_register_driver(struct uart_driver *uart); |
| void uart_unregister_driver(struct uart_driver *uart); |
| int uart_add_one_port(struct uart_driver *reg, struct uart_port *port); |
| int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port); |
| int uart_match_port(struct uart_port *port1, struct uart_port *port2); |
| |
| /* |
| * Power Management |
| */ |
| int uart_suspend_port(struct uart_driver *reg, struct uart_port *port); |
| int uart_resume_port(struct uart_driver *reg, struct uart_port *port); |
| |
| #define uart_circ_empty(circ) ((circ)->head == (circ)->tail) |
| #define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0) |
| |
| #define uart_circ_chars_pending(circ) \ |
| (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE)) |
| |
| #define uart_circ_chars_free(circ) \ |
| (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE)) |
| |
| #define uart_tx_stopped(port) \ |
| ((port)->info->tty->stopped || (port)->info->tty->hw_stopped) |
| |
| /* |
| * The following are helper functions for the low level drivers. |
| */ |
| static inline int |
| uart_handle_sysrq_char(struct uart_port *port, unsigned int ch, |
| struct pt_regs *regs) |
| { |
| #ifdef SUPPORT_SYSRQ |
| if (port->sysrq) { |
| if (ch && time_before(jiffies, port->sysrq)) { |
| handle_sysrq(ch, regs, NULL); |
| port->sysrq = 0; |
| return 1; |
| } |
| port->sysrq = 0; |
| } |
| #endif |
| return 0; |
| } |
| #ifndef SUPPORT_SYSRQ |
| #define uart_handle_sysrq_char(port,ch,regs) uart_handle_sysrq_char(port, 0, NULL) |
| #endif |
| |
| /* |
| * We do the SysRQ and SAK checking like this... |
| */ |
| static inline int uart_handle_break(struct uart_port *port) |
| { |
| struct uart_info *info = port->info; |
| #ifdef SUPPORT_SYSRQ |
| if (port->cons && port->cons->index == port->line) { |
| if (!port->sysrq) { |
| port->sysrq = jiffies + HZ*5; |
| return 1; |
| } |
| port->sysrq = 0; |
| } |
| #endif |
| if (port->flags & UPF_SAK) |
| do_SAK(info->tty); |
| return 0; |
| } |
| |
| /** |
| * uart_handle_dcd_change - handle a change of carrier detect state |
| * @port: uart_port structure for the open port |
| * @status: new carrier detect status, nonzero if active |
| */ |
| static inline void |
| uart_handle_dcd_change(struct uart_port *port, unsigned int status) |
| { |
| struct uart_info *info = port->info; |
| |
| port->icount.dcd++; |
| |
| #ifdef CONFIG_HARD_PPS |
| if ((port->flags & UPF_HARDPPS_CD) && status) |
| hardpps(); |
| #endif |
| |
| if (info->flags & UIF_CHECK_CD) { |
| if (status) |
| wake_up_interruptible(&info->open_wait); |
| else if (info->tty) |
| tty_hangup(info->tty); |
| } |
| } |
| |
| /** |
| * uart_handle_cts_change - handle a change of clear-to-send state |
| * @port: uart_port structure for the open port |
| * @status: new clear to send status, nonzero if active |
| */ |
| static inline void |
| uart_handle_cts_change(struct uart_port *port, unsigned int status) |
| { |
| struct uart_info *info = port->info; |
| struct tty_struct *tty = info->tty; |
| |
| port->icount.cts++; |
| |
| if (info->flags & UIF_CTS_FLOW) { |
| if (tty->hw_stopped) { |
| if (status) { |
| tty->hw_stopped = 0; |
| port->ops->start_tx(port); |
| uart_write_wakeup(port); |
| } |
| } else { |
| if (!status) { |
| tty->hw_stopped = 1; |
| port->ops->stop_tx(port); |
| } |
| } |
| } |
| } |
| |
| #include <linux/tty_flip.h> |
| |
| static inline void |
| uart_insert_char(struct uart_port *port, unsigned int status, |
| unsigned int overrun, unsigned int ch, unsigned int flag) |
| { |
| struct tty_struct *tty = port->info->tty; |
| |
| if ((status & port->ignore_status_mask & ~overrun) == 0) |
| tty_insert_flip_char(tty, ch, flag); |
| |
| /* |
| * Overrun is special. Since it's reported immediately, |
| * it doesn't affect the current character. |
| */ |
| if (status & ~port->ignore_status_mask & overrun) |
| tty_insert_flip_char(tty, 0, TTY_OVERRUN); |
| } |
| |
| /* |
| * UART_ENABLE_MS - determine if port should enable modem status irqs |
| */ |
| #define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \ |
| (cflag) & CRTSCTS || \ |
| !((cflag) & CLOCAL)) |
| |
| #endif |
| |
| #endif /* LINUX_SERIAL_CORE_H */ |