Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
ARM: S3C2443: Remove #if 0 for clk_mpll
ARM: S3C2443: Update notes on MPLLREF clock
ARM: S3C2443: Further clksrc-clk conversions
ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
USB: Fix s3c-hsotg build following Samsung platform header moves
ARM: S3C64XX: Reintroduce unconditional build of audio device
ARM: 5961/1: ux500: fix CLKRST addresses
ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
ASoC: Fix S3C64xx IIS driver for Samsung header reorg
ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
[ARM] pxa: fix typo in mxm8x10.h
[ARM] pxa/raumfeld: set GPIO drive bits for LED pins
[ARM] pxa/zeus: Add support for mcp2515 CAN bus
[ARM] pxa/zeus: Add support for onboard max6369 watchdog
[ARM] pxa/zeus: Add Eurotech as the manufacturer
[ARM] pxa/zeus: Correct the USB host initialisation flags
[ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
[ARM] pxa: refactor uncompress.h for non-PXA uarts
[ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
...
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 0000000..7cced1f
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,86 @@
+ Samsung ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The Samsung range of ARM SoCs spans many similar devices, from the initial
+ ARM9 through to the newest ARM cores. This document shows an overview of
+ the current kernel support, how to use it and where to find the code
+ that supports this.
+
+ The currently supported SoCs are:
+
+ - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+ - S3C64XX: S3C6400 and S3C6410
+ - S5PC6440
+
+ S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+ There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+ deals with the architecture and drivers specific to these devices.
+
+ See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+ on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+ A number of configurations are supplied, as there is no current way of
+ unifying all the SoCs into one kernel.
+
+ s5p6440_defconfig - S5P6440 specific default configuration
+ s5pc100_defconfig - S5PC100 specific default configuration
+
+
+Layout
+------
+
+ The directory layout is currently being restructured, and consists of
+ several platform directories and then the machine specific directories
+ of the CPUs being built for.
+
+ plat-samsung provides the base for all the implementations, and is the
+ last in the line of include directories that are processed for the build
+ specific information. It contains the base clock, GPIO and device definitions
+ to get the system running.
+
+ plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
+ involved in other builds this will be phased out once the relevant code is
+ moved elsewhere.
+
+ plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+ plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
+
+ plat-s5p is for s5p specific builds, more to be added.
+
+
+ [ to finish ]
+
+
+Port Contributors
+-----------------
+
+ Ben Dooks (BJD)
+ Vincent Sanders
+ Herbert Potzl
+ Arnaud Patard (RTP)
+ Roc Wu
+ Klaus Fetscher
+ Dimitry Andric
+ Shannon Holland
+ Guillaume Gourat (NexVision)
+ Christer Weinigel (wingel) (Acer N30)
+ Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
new file mode 100755
index 0000000..0c50220
--- /dev/null
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -0,0 +1,167 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+ eqat = index(s, "=")
+ comat = index(s, ",")
+ return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+ return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+ r = split(l, tp)
+
+ p[0] = tp[2]
+ p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+ if (0)
+ printf "find_length " f "\n" > "/dev/stderr"
+
+ if (f ~ /0x1/)
+ return 1
+ else if (f ~ /0x3/)
+ return 2
+ else if (f ~ /0x7/)
+ return 3
+ else if (f ~ /0xf/)
+ return 4
+
+ printf "unknown legnth " f "\n" > "/dev/stderr"
+ exit
+}
+
+function find_shift(s)
+{
+ id = index(s, "<")
+ if (id <= 0) {
+ printf "cannot find shift " s "\n" > "/dev/stderr"
+ exit
+ }
+
+ return substr(s, id+2)
+}
+
+
+BEGIN {
+ if (ARGC < 2) {
+ print "too few arguments" > "/dev/stderr"
+ exit
+ }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+ while (getline line < ARGV[1] > 0) {
+ if (line ~ /\#define.*_MASK/ &&
+ !(line ~ /S5PC100_EPLL_MASK/) &&
+ !(line ~ /USB_SIG_MASK/)) {
+ splitdefine(line, fields)
+ name = fields[0]
+ if (0)
+ printf "MASK " line "\n" > "/dev/stderr"
+ dmask[name,0] = find_length(fields[1])
+ dmask[name,1] = find_shift(fields[1])
+ if (0)
+ printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+ } else {
+ }
+ }
+
+ delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+ shift=""
+ mask=""
+ divshift=""
+ reg_div=""
+ reg_src=""
+ indent=1
+
+ print $0
+
+ for(; indent >= 1;) {
+ if ((getline line) <= 0) {
+ printf "unexpected end of file" > "/dev/stderr"
+ exit 1;
+ }
+
+ if (line ~ /\.shift/) {
+ shift = extract_value(line)
+ } else if (line ~ /\.mask/) {
+ mask = extract_value(line)
+ } else if (line ~ /\.reg_divider/) {
+ reg_div = extract_value(line)
+ } else if (line ~ /\.reg_source/) {
+ reg_src = extract_value(line)
+ } else if (line ~ /\.divider_shift/) {
+ divshift = extract_value(line)
+ } else if (line ~ /{/) {
+ indent++
+ print line
+ } else if (line ~ /}/) {
+ indent--
+
+ if (indent == 0) {
+ if (0) {
+ printf "shift '" shift "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+ printf "mask '" mask "'\n" > "/dev/stderr"
+ printf "dshft '" divshift "'\n" > "/dev/stderr"
+ printf "rdiv '" reg_div "'\n" > "/dev/stderr"
+ printf "rsrc '" reg_src "'\n" > "/dev/stderr"
+ }
+
+ generated = mask
+ sub(reg_src, reg_div, generated)
+
+ if (0) {
+ printf "/* rsrc " reg_src " */\n"
+ printf "/* rdiv " reg_div " */\n"
+ printf "/* shift " shift " */\n"
+ printf "/* mask " mask " */\n"
+ printf "/* generated " generated " */\n"
+ }
+
+ if (reg_div != "") {
+ printf "\t.reg_div = { "
+ printf ".reg = " reg_div ", "
+ printf ".shift = " dmask[generated,1] ", "
+ printf ".size = " dmask[generated,0] ", "
+ printf "},\n"
+ }
+
+ printf "\t.reg_src = { "
+ printf ".reg = " reg_src ", "
+ printf ".shift = " dmask[mask,1] ", "
+ printf ".size = " dmask[mask,0] ", "
+
+ printf "},\n"
+
+ }
+
+ print line
+ } else {
+ print line
+ }
+
+ if (0)
+ printf indent ":" line "\n" > "/dev/stderr"
+ }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/MAINTAINERS b/MAINTAINERS
index b2403eb..fe88b5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -666,6 +666,12 @@
F: arch/arm/mach-mx*/
F: arch/arm/plat-mxc/
+ARM/FREESCALE IMX51
+M: Amit Kucheria <amit.kucheria@canonical.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-mx5/
+
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -939,6 +945,16 @@
S: Maintained
F: arch/arm/mach-s3c6410/
+ARM/SHMOBILE ARM ARCHITECTURE
+M: Paul Mundt <lethal@linux-sh.org>
+M: Magnus Damm <magnus.damm@gmail.com>
+L: linux-sh@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+W: http://oss.renesas.com
+S: Supported
+F: arch/arm/mach-shmobile/
+F: drivers/sh/
+
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -4502,6 +4518,13 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Maintained
+MMP2 SUPPORT (aka ARMADA610)
+M: Haojian Zhuang <haojian.zhuang@marvell.com>
+M: Eric Miao <eric.y.miao@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S: Maintained
+
PXA MMCI DRIVER
S: Orphan
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 15d43c3..cadfe2e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,10 +324,9 @@
bool "Freescale MXC/iMX-based"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select COMMON_CLKDEV
help
Support for Freescale MXC/iMX-based family of processors
@@ -511,7 +510,7 @@
Orion-2 (5281), Orion-1-90 (6183).
config ARCH_MMP
- bool "Marvell PXA168/910"
+ bool "Marvell PXA168/910/MMP2"
depends on MMU
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
@@ -522,7 +521,7 @@
select TICK_ONESHOT
select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
@@ -608,6 +607,11 @@
interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
+config ARCH_SHMOBILE
+ bool "Renesas SH-Mobile"
+ help
+ Support for Renesas's SH-Mobile ARM platforms
+
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
@@ -651,12 +655,43 @@
config ARCH_S3C64XX
bool "Samsung S3C64XX"
+ select PLAT_SAMSUNG
+ select CPU_V6
select GENERIC_GPIO
+ select ARM_VIC
select HAVE_CLK
+ select NO_IOPORT
select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_VIC_TIMER
+ select SAMSUNG_IRQ_UART
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select S3C_GPIO_CFG_S3C64XX
+ select S3C_DEV_NAND
+ select USB_ARCH_HAS_OHCI
+ select SAMSUNG_GPIOLIB_4BIT
help
Samsung S3C64XX series based systems
+config ARCH_S5P6440
+ bool "Samsung S5P6440"
+ select CPU_V6
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Samsung S5P6440 CPU based systems
+
+config ARCH_S5P6442
+ bool "Samsung S5P6442"
+ select CPU_V6
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Samsung S5P6442 CPU based systems
+
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select GENERIC_GPIO
@@ -666,6 +701,15 @@
help
Samsung S5PC1XX series based systems
+config ARCH_S5PV210
+ bool "Samsung S5PV210/S5PC110"
+ select CPU_V7
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select ARM_L1_CACHE_SHIFT_6
+ help
+ Samsung S5PV210/S5PC110 series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -831,8 +875,7 @@
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
@@ -840,21 +883,27 @@
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
endif
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6440/Kconfig"
+
+source "arch/arm/mach-s5p6442/Kconfig"
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-ux500/Kconfig"
@@ -1120,7 +1169,7 @@
config HZ
int
default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default 100
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5cb9326..91344af 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,7 +117,7 @@
cause the debug messages to appear on the first serial port.
config DEBUG_S3C_UART
- depends on PLAT_S3C
+ depends on PLAT_SAMSUNG
int "S3C UART to use for low-level debug"
default "0"
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 81f54ca..ed820e7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -146,6 +146,7 @@
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
@@ -159,12 +160,16 @@
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
+machine-$(CONFIG_ARCH_S5P6440) := s5p6440
+machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
+machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
+machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_U300) := u300
@@ -178,14 +183,15 @@
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
-plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
+plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
+plat-$(CONFIG_PLAT_S5P) := s5p samsung
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 99b75aa..535a91d 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,8 +170,8 @@
.text
adr r0, LC0
- ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp} )
- THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, ip} )
+ ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
+ THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
THUMB( ldr sp, [r0, #28] )
subs r0, r0, r1 @ calculate the delta offset
@@ -182,12 +182,13 @@
/*
* We're running at a different address. We need to fix
* up various pointers:
- * r5 - zImage base address
- * r6 - GOT start
+ * r5 - zImage base address (_start)
+ * r6 - size of decompressed image
+ * r11 - GOT start
* ip - GOT end
*/
add r5, r5, r0
- add r6, r6, r0
+ add r11, r11, r0
add ip, ip, r0
#ifndef CONFIG_ZBOOT_ROM
@@ -205,10 +206,10 @@
/*
* Relocate all entries in the GOT table.
*/
-1: ldr r1, [r6, #0] @ relocate entries in the GOT
+1: ldr r1, [r11, #0] @ relocate entries in the GOT
add r1, r1, r0 @ table. This fixes up the
- str r1, [r6], #4 @ C references.
- cmp r6, ip
+ str r1, [r11], #4 @ C references.
+ cmp r11, ip
blo 1b
#else
@@ -216,12 +217,12 @@
* Relocate entries in the GOT table. We only relocate
* the entries that are outside the (relocated) BSS region.
*/
-1: ldr r1, [r6, #0] @ relocate entries in the GOT
+1: ldr r1, [r11, #0] @ relocate entries in the GOT
cmp r1, r2 @ entry < bss_start ||
cmphs r3, r1 @ _end < entry
addlo r1, r1, r0 @ table. This fixes up the
- str r1, [r6], #4 @ C references.
- cmp r6, ip
+ str r1, [r11], #4 @ C references.
+ cmp r11, ip
blo 1b
#endif
@@ -247,6 +248,7 @@
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
* r5 = start of this image
+ * r6 = size of decompressed image
* r2 = end of malloc space (and therefore this image)
* We basically want:
* r4 >= r2 -> OK
@@ -254,8 +256,7 @@
*/
cmp r4, r2
bhs wont_overwrite
- sub r3, sp, r5 @ > compressed kernel size
- add r0, r4, r3, lsl #2 @ allow for 4x expansion
+ add r0, r4, r6
cmp r0, r5
bls wont_overwrite
@@ -271,7 +272,6 @@
* r1-r3 = unused
* r4 = kernel execution address
* r5 = decompressed kernel start
- * r6 = processor ID
* r7 = architecture ID
* r8 = atags pointer
* r9-r12,r14 = corrupted
@@ -312,7 +312,8 @@
.word _end @ r3
.word zreladdr @ r4
.word _start @ r5
- .word _got_start @ r6
+ .word _image_size @ r6
+ .word _got_start @ r11
.word _got_end @ ip
.word user_stack+4096 @ sp
LC1: .word reloc_end - reloc_start
@@ -336,7 +337,6 @@
*
* On entry,
* r4 = kernel execution address
- * r6 = processor ID
* r7 = architecture number
* r8 = atags pointer
* r9 = run-time address of "start" (???)
@@ -542,7 +542,6 @@
* r1-r3 = unused
* r4 = kernel execution address
* r5 = decompressed kernel start
- * r6 = processor ID
* r7 = architecture ID
* r8 = atags pointer
* r9-r12,r14 = corrupted
@@ -581,19 +580,19 @@
* r1 = corrupted
* r2 = corrupted
* r3 = block offset
- * r6 = corrupted
+ * r9 = corrupted
* r12 = corrupted
*/
call_cache_fn: adr r12, proc_types
#ifdef CONFIG_CPU_CP15
- mrc p15, 0, r6, c0, c0 @ get processor ID
+ mrc p15, 0, r9, c0, c0 @ get processor ID
#else
- ldr r6, =CONFIG_PROCESSOR_ID
+ ldr r9, =CONFIG_PROCESSOR_ID
#endif
1: ldr r1, [r12, #0] @ get value
ldr r2, [r12, #4] @ get mask
- eor r1, r1, r6 @ (real ^ match)
+ eor r1, r1, r9 @ (real ^ match)
tst r1, r2 @ & mask
ARM( addeq pc, r12, r3 ) @ call cache function
THUMB( addeq r12, r3 )
@@ -778,8 +777,7 @@
* Turn off the Cache and MMU. ARMv3 does not support
* reading the control register, but ARMv4 does.
*
- * On entry, r6 = processor ID
- * On exit, r0, r1, r2, r3, r12 corrupted
+ * On exit, r0, r1, r2, r3, r9, r12 corrupted
* This routine must preserve: r4, r6, r7
*/
.align 5
@@ -852,10 +850,8 @@
/*
* Clean and flush the cache to maintain consistency.
*
- * On entry,
- * r6 = processor ID
* On exit,
- * r1, r2, r3, r11, r12 corrupted
+ * r1, r2, r3, r9, r11, r12 corrupted
* This routine must preserve:
* r0, r4, r5, r6, r7
*/
@@ -967,7 +963,7 @@
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
mrc p15, 0, r3, c0, c0, 1 @ read cache type
- teq r3, r6 @ cache ID register present?
+ teq r3, r9 @ cache ID register present?
beq no_cache_id
mov r1, r3, lsr #18
and r1, r1, #7
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 7ca9ecf..d081689 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -43,6 +43,9 @@
_etext = .;
+ /* Assume size of decompressed image is 4x the compressed image */
+ _image_size = (_etext - _text) * 4;
+
_got_start = .;
.got : { *(.got) }
_got_end = .;
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index bd36c77..90ae00b 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -32,6 +32,12 @@
#include <asm/hardware/locomo.h>
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY (0)
+#define IRQ_LOCOMO_GPIO (1)
+#define IRQ_LOCOMO_LT (2)
+#define IRQ_LOCOMO_SPI (3)
+
/* M62332 output channel selection */
#define M62332_EVR_CH 1 /* M62332 volume channel number */
/* 0 : CH.1 , 1 : CH. 2 */
@@ -58,6 +64,7 @@
struct device *dev;
unsigned long phys;
unsigned int irq;
+ int irq_base;
spinlock_t lock;
void __iomem *base;
#ifdef CONFIG_PM
@@ -81,9 +88,7 @@
static struct locomo_dev_info locomo_devices[] = {
{
.devid = LOCOMO_DEVID_KEYBOARD,
- .irq = {
- IRQ_LOCOMO_KEY,
- },
+ .irq = { IRQ_LOCOMO_KEY },
.name = "locomo-keyboard",
.offset = LOCOMO_KEYBOARD,
.length = 16,
@@ -133,53 +138,20 @@
},
};
-
-/** LoCoMo interrupt handling stuff.
- * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
- * that is, there is only one real hardware interrupt
- * we determine which interrupt it is by reading some IO memory.
- * We have two levels of expansion, first in the handler for the
- * hardware interrupt we generate an interrupt
- * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
- *
- * hardware irq reads LOCOMO_ICR & 0x0f00
- * IRQ_LOCOMO_KEY_BASE
- * IRQ_LOCOMO_GPIO_BASE
- * IRQ_LOCOMO_LT_BASE
- * IRQ_LOCOMO_SPI_BASE
- * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
- * IRQ_LOCOMO_KEY
- * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
- * IRQ_LOCOMO_GPIO[0-15]
- * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
- * IRQ_LOCOMO_LT
- * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
- * IRQ_LOCOMO_SPI_RFR
- * IRQ_LOCOMO_SPI_RFW
- * IRQ_LOCOMO_SPI_OVRN
- * IRQ_LOCOMO_SPI_TEND
- */
-
-#define LOCOMO_IRQ_START (IRQ_LOCOMO_KEY_BASE)
-#define LOCOMO_IRQ_KEY_START (IRQ_LOCOMO_KEY)
-#define LOCOMO_IRQ_GPIO_START (IRQ_LOCOMO_GPIO0)
-#define LOCOMO_IRQ_LT_START (IRQ_LOCOMO_LT)
-#define LOCOMO_IRQ_SPI_START (IRQ_LOCOMO_SPI_RFR)
-
static void locomo_handler(unsigned int irq, struct irq_desc *desc)
{
+ struct locomo *lchip = get_irq_chip_data(irq);
int req, i;
- void __iomem *mapbase = get_irq_chip_data(irq);
/* Acknowledge the parent IRQ */
desc->chip->ack(irq);
/* check why this interrupt was generated */
- req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00;
+ req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
if (req) {
/* generate the next interrupt(s) */
- irq = LOCOMO_IRQ_START;
+ irq = lchip->irq_base;
for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0100 << i)) {
generic_handle_irq(irq);
@@ -195,20 +167,20 @@
static void locomo_mask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chip_data(irq);
+ struct locomo *lchip = get_irq_chip_data(irq);
unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_ICR);
- r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
- locomo_writel(r, mapbase + LOCOMO_ICR);
+ r = locomo_readl(lchip->base + LOCOMO_ICR);
+ r &= ~(0x0010 << (irq - lchip->irq_base));
+ locomo_writel(r, lchip->base + LOCOMO_ICR);
}
static void locomo_unmask_irq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chip_data(irq);
+ struct locomo *lchip = get_irq_chip_data(irq);
unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_ICR);
- r |= (0x0010 << (irq - LOCOMO_IRQ_START));
- locomo_writel(r, mapbase + LOCOMO_ICR);
+ r = locomo_readl(lchip->base + LOCOMO_ICR);
+ r |= (0x0010 << (irq - lchip->irq_base));
+ locomo_writel(r, lchip->base + LOCOMO_ICR);
}
static struct irq_chip locomo_chip = {
@@ -218,297 +190,22 @@
.unmask = locomo_unmask_irq,
};
-static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
-
- if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
- generic_handle_irq(LOCOMO_IRQ_KEY_START);
- }
-}
-
-static void locomo_key_ack_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
- r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
- locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_mask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
- r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
- locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_unmask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
- r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
- locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static struct irq_chip locomo_key_chip = {
- .name = "LOCOMO-key",
- .ack = locomo_key_ack_irq,
- .mask = locomo_key_mask_irq,
- .unmask = locomo_key_unmask_irq,
-};
-
-static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
- int req, i;
- void __iomem *mapbase = get_irq_chip_data(irq);
-
- req = locomo_readl(mapbase + LOCOMO_GIR) &
- locomo_readl(mapbase + LOCOMO_GPD) &
- 0xffff;
-
- if (req) {
- irq = LOCOMO_IRQ_GPIO_START;
- for (i = 0; i <= 15; i++, irq++) {
- if (req & (0x0001 << i)) {
- generic_handle_irq(irq);
- }
- }
- }
-}
-
-static void locomo_gpio_ack_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_GWE);
- r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
- locomo_writel(r, mapbase + LOCOMO_GWE);
-
- r = locomo_readl(mapbase + LOCOMO_GIS);
- r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
- locomo_writel(r, mapbase + LOCOMO_GIS);
-
- r = locomo_readl(mapbase + LOCOMO_GWE);
- r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
- locomo_writel(r, mapbase + LOCOMO_GWE);
-}
-
-static void locomo_gpio_mask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_GIE);
- r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
- locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static void locomo_gpio_unmask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_GIE);
- r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
- locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-
-static int locomo_gpio_type(unsigned int irq, unsigned int type)
-{
- unsigned int mask;
- void __iomem *mapbase = get_irq_chip_data(irq);
-
- mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
-
- if (type == IRQ_TYPE_PROBE) {
- if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (type & IRQ_TYPE_EDGE_RISING)
- GPIO_IRQ_rising_edge |= mask;
- else
- GPIO_IRQ_rising_edge &= ~mask;
- if (type & IRQ_TYPE_EDGE_FALLING)
- GPIO_IRQ_falling_edge |= mask;
- else
- GPIO_IRQ_falling_edge &= ~mask;
- locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
- locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
-
- return 0;
-}
-
-static struct irq_chip locomo_gpio_chip = {
- .name = "LOCOMO-gpio",
- .ack = locomo_gpio_ack_irq,
- .mask = locomo_gpio_mask_irq,
- .unmask = locomo_gpio_unmask_irq,
- .set_type = locomo_gpio_type,
-};
-
-static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
-
- if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
- generic_handle_irq(LOCOMO_IRQ_LT_START);
- }
-}
-
-static void locomo_lt_ack_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_LTINT);
- r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
- locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_mask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_LTINT);
- r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
- locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_unmask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_LTINT);
- r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
- locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static struct irq_chip locomo_lt_chip = {
- .name = "LOCOMO-lt",
- .ack = locomo_lt_ack_irq,
- .mask = locomo_lt_mask_irq,
- .unmask = locomo_lt_unmask_irq,
-};
-
-static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
-{
- int req, i;
- void __iomem *mapbase = get_irq_chip_data(irq);
-
- req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
- if (req) {
- irq = LOCOMO_IRQ_SPI_START;
-
- for (i = 0; i <= 3; i++, irq++) {
- if (req & (0x0001 << i)) {
- generic_handle_irq(irq);
- }
- }
- }
-}
-
-static void locomo_spi_ack_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
- r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-
- r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
- r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-
- r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
- r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-}
-
-static void locomo_spi_mask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
- r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static void locomo_spi_unmask_irq(unsigned int irq)
-{
- void __iomem *mapbase = get_irq_chip_data(irq);
- unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
- r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static struct irq_chip locomo_spi_chip = {
- .name = "LOCOMO-spi",
- .ack = locomo_spi_ack_irq,
- .mask = locomo_spi_mask_irq,
- .unmask = locomo_spi_unmask_irq,
-};
-
static void locomo_setup_irq(struct locomo *lchip)
{
- int irq;
- void __iomem *irqbase = lchip->base;
+ int irq = lchip->irq_base;
/*
* Install handler for IRQ_LOCOMO_HW.
*/
set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
- set_irq_chip_data(lchip->irq, irqbase);
+ set_irq_chip_data(lchip->irq, lchip);
set_irq_chained_handler(lchip->irq, locomo_handler);
- /* Install handlers for IRQ_LOCOMO_*_BASE */
- set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
- set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
- set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-
- set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
- set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
- set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-
- set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
- set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
- set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-
- set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
- set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
- set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-
- /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
- set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
- set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
- set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
- set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
-
- /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
- for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
- set_irq_chip(irq, &locomo_gpio_chip);
- set_irq_chip_data(irq, irqbase);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
- set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
- set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
- set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
- set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
-
- /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
- for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
- set_irq_chip(irq, &locomo_spi_chip);
- set_irq_chip_data(irq, irqbase);
- set_irq_handler(irq, handle_edge_irq);
+ /* Install handlers for IRQ_LOCOMO_* */
+ for ( ; irq <= lchip->irq_base + 3; irq++) {
+ set_irq_chip(irq, &locomo_chip);
+ set_irq_chip_data(irq, lchip);
+ set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
@@ -555,7 +252,8 @@
dev->mapbase = 0;
dev->length = info->length;
- memmove(dev->irq, info->irq, sizeof(dev->irq));
+ dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+ NO_IRQ : lchip->irq_base + info->irq[0];
ret = device_register(&dev->dev);
if (ret) {
@@ -672,6 +370,7 @@
static int
__locomo_probe(struct device *me, struct resource *mem, int irq)
{
+ struct locomo_platform_data *pdata = me->platform_data;
struct locomo *lchip;
unsigned long r;
int i, ret = -ENODEV;
@@ -687,6 +386,7 @@
lchip->phys = mem->start;
lchip->irq = irq;
+ lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
/*
* Map the whole region. This also maps the
@@ -753,7 +453,7 @@
* The interrupt controller must be initialised before any
* other device to ensure that the interrupts are available.
*/
- if (lchip->irq != NO_IRQ)
+ if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
locomo_setup_irq(lchip);
for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 8ba7044..a52a27c 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -35,6 +35,58 @@
#include <asm/hardware/sa1111.h>
+/* SA1111 IRQs */
+#define IRQ_GPAIN0 (0)
+#define IRQ_GPAIN1 (1)
+#define IRQ_GPAIN2 (2)
+#define IRQ_GPAIN3 (3)
+#define IRQ_GPBIN0 (4)
+#define IRQ_GPBIN1 (5)
+#define IRQ_GPBIN2 (6)
+#define IRQ_GPBIN3 (7)
+#define IRQ_GPBIN4 (8)
+#define IRQ_GPBIN5 (9)
+#define IRQ_GPCIN0 (10)
+#define IRQ_GPCIN1 (11)
+#define IRQ_GPCIN2 (12)
+#define IRQ_GPCIN3 (13)
+#define IRQ_GPCIN4 (14)
+#define IRQ_GPCIN5 (15)
+#define IRQ_GPCIN6 (16)
+#define IRQ_GPCIN7 (17)
+#define IRQ_MSTXINT (18)
+#define IRQ_MSRXINT (19)
+#define IRQ_MSSTOPERRINT (20)
+#define IRQ_TPTXINT (21)
+#define IRQ_TPRXINT (22)
+#define IRQ_TPSTOPERRINT (23)
+#define SSPXMTINT (24)
+#define SSPRCVINT (25)
+#define SSPROR (26)
+#define AUDXMTDMADONEA (32)
+#define AUDRCVDMADONEA (33)
+#define AUDXMTDMADONEB (34)
+#define AUDRCVDMADONEB (35)
+#define AUDTFSR (36)
+#define AUDRFSR (37)
+#define AUDTUR (38)
+#define AUDROR (39)
+#define AUDDTS (40)
+#define AUDRDD (41)
+#define AUDSTO (42)
+#define IRQ_USBPWR (43)
+#define IRQ_HCIM (44)
+#define IRQ_HCIBUFFACC (45)
+#define IRQ_HCIRMTWKP (46)
+#define IRQ_NHCIMFCIR (47)
+#define IRQ_USB_PORT_RESUME (48)
+#define IRQ_S0_READY_NINT (49)
+#define IRQ_S1_READY_NINT (50)
+#define IRQ_S0_CD_VALID (51)
+#define IRQ_S1_CD_VALID (52)
+#define IRQ_S0_BVD1_STSCHG (53)
+#define IRQ_S1_BVD1_STSCHG (54)
+
extern void __init sa1110_mb_enable(void);
/*
@@ -49,6 +101,7 @@
struct clk *clk;
unsigned long phys;
int irq;
+ int irq_base; /* base for cascaded on-chip IRQs */
spinlock_t lock;
void __iomem *base;
#ifdef CONFIG_PM
@@ -152,36 +205,37 @@
sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int stat0, stat1, i;
- void __iomem *base = get_irq_data(irq);
+ struct sa1111 *sachip = get_irq_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
- stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
- stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
+ stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
+ stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
- sa1111_writel(stat0, base + SA1111_INTSTATCLR0);
+ sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
desc->chip->ack(irq);
- sa1111_writel(stat1, base + SA1111_INTSTATCLR1);
+ sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
if (stat0 == 0 && stat1 == 0) {
do_bad_IRQ(irq, desc);
return;
}
- for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
+ for (i = 0; stat0; i++, stat0 >>= 1)
if (stat0 & 1)
- handle_edge_irq(i, irq_desc + i);
+ generic_handle_irq(i + sachip->irq_base);
- for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
+ for (i = 32; stat1; i++, stat1 >>= 1)
if (stat1 & 1)
- handle_edge_irq(i, irq_desc + i);
+ generic_handle_irq(i + sachip->irq_base);
/* For level-based interrupts */
desc->chip->unmask(irq);
}
-#define SA1111_IRQMASK_LO(x) (1 << (x - IRQ_SA1111_START))
-#define SA1111_IRQMASK_HI(x) (1 << (x - IRQ_SA1111_START - 32))
+#define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base))
+#define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32))
static void sa1111_ack_irq(unsigned int irq)
{
@@ -189,7 +243,8 @@
static void sa1111_mask_lowirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chip_data(irq);
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned long ie0;
ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -199,7 +254,8 @@
static void sa1111_unmask_lowirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chip_data(irq);
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned long ie0;
ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -216,8 +272,9 @@
*/
static int sa1111_retrigger_lowirq(unsigned int irq)
{
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned int mask = SA1111_IRQMASK_LO(irq);
- void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip0;
int i;
@@ -237,8 +294,9 @@
static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
{
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned int mask = SA1111_IRQMASK_LO(irq);
- void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip0;
if (flags == IRQ_TYPE_PROBE)
@@ -260,8 +318,9 @@
static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
{
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned int mask = SA1111_IRQMASK_LO(irq);
- void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long we0;
we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -286,7 +345,8 @@
static void sa1111_mask_highirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chip_data(irq);
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned long ie1;
ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -296,7 +356,8 @@
static void sa1111_unmask_highirq(unsigned int irq)
{
- void __iomem *mapbase = get_irq_chip_data(irq);
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned long ie1;
ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -313,8 +374,9 @@
*/
static int sa1111_retrigger_highirq(unsigned int irq)
{
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned int mask = SA1111_IRQMASK_HI(irq);
- void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip1;
int i;
@@ -334,8 +396,9 @@
static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
{
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned int mask = SA1111_IRQMASK_HI(irq);
- void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip1;
if (flags == IRQ_TYPE_PROBE)
@@ -357,8 +420,9 @@
static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
{
+ struct sa1111 *sachip = get_irq_chip_data(irq);
+ void __iomem *mapbase = sachip->base + SA1111_INTC;
unsigned int mask = SA1111_IRQMASK_HI(irq);
- void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long we1;
we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -412,14 +476,14 @@
for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
set_irq_chip(irq, &sa1111_low_chip);
- set_irq_chip_data(irq, irqbase);
+ set_irq_chip_data(irq, sachip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
set_irq_chip(irq, &sa1111_high_chip);
- set_irq_chip_data(irq, irqbase);
+ set_irq_chip_data(irq, sachip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
@@ -428,7 +492,7 @@
* Register SA1111 interrupt
*/
set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
- set_irq_data(sachip->irq, irqbase);
+ set_irq_data(sachip->irq, sachip);
set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
}
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 37bda5f..9012004 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -140,6 +140,7 @@
EXPORT_SYMBOL(read_scoop_reg);
EXPORT_SYMBOL(write_scoop_reg);
+#ifdef CONFIG_PM
static void check_scoop_reg(struct scoop_dev *sdev)
{
unsigned short mcr;
@@ -149,7 +150,6 @@
iowrite16(0x0101, sdev->base + SCOOP_MCR);
}
-#ifdef CONFIG_PM
static int scoop_suspend(struct platform_device *dev, pm_message_t state)
{
struct scoop_dev *sdev = platform_get_drvdata(dev);
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
new file mode 100644
index 0000000..e14229b
--- /dev/null
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb 8 12:25:36 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+# CONFIG_ARCH_SH7377 is not set
+CONFIG_ARCH_SH7372=y
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_AP4EVB=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x10000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
new file mode 100644
index 0000000..3c19031
--- /dev/null
+++ b/arch/arm/configs/g3evm_defconfig
@@ -0,0 +1,774 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb 8 12:20:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+CONFIG_ARCH_SH7367=y
+# CONFIG_ARCH_SH7377 is not set
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G3EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x50000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
new file mode 100644
index 0000000..8ee79a5
--- /dev/null
+++ b/arch/arm/configs/g4evm_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb 8 12:21:35 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+CONFIG_ARCH_SH7377=y
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G4EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
new file mode 100644
index 0000000..95d2bec
--- /dev/null
+++ b/arch/arm/configs/imote2_defconfig
@@ -0,0 +1,2077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc8
+# Sat Feb 13 21:48:53 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_ARCOM_ZEUS is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+CONFIG_MACH_INTELMOTE2=y
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=y
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_IEEE802154_DRIVERS=y
+# CONFIG_IEEE802154_FAKEHARD is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DA9030 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_DA903X is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 5fc44c9..4611d3c 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov 7 20:31:18 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb 4 23:08:54 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -127,14 +134,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -163,6 +197,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -185,6 +220,7 @@
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# Marvell Kirkwood Implementations
@@ -195,7 +231,11 @@
CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_TS219=y
+CONFIG_MACH_TS41X=y
+CONFIG_MACH_OPENRD=y
CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_NETSPACE_V2=y
CONFIG_PLAT_ORION=y
#
@@ -262,12 +302,10 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
@@ -398,15 +436,18 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
@@ -556,6 +597,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -606,7 +651,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -642,6 +689,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -696,15 +744,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
@@ -720,7 +769,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -828,13 +877,6 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
@@ -846,19 +888,24 @@
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_HERMES is not set
-# CONFIG_WL12XX is not set
# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -881,6 +928,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -890,6 +938,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -933,6 +982,7 @@
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -1019,11 +1069,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1032,7 +1077,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1048,6 +1092,8 @@
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_ORION=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
@@ -1074,10 +1120,12 @@
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1116,6 +1164,7 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
@@ -1123,6 +1172,8 @@
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1305,6 +1356,7 @@
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
@@ -1344,6 +1396,7 @@
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@@ -1388,6 +1441,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1417,7 +1471,9 @@
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1684,7 +1740,9 @@
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1692,7 +1750,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index d2a90eb..ff44bd1 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -184,7 +184,7 @@
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
CONFIG_CPU_LLSERIAL_S3C2440=y
@@ -199,8 +199,8 @@
#
# Power management
#
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
new file mode 100644
index 0000000..03f76cf
--- /dev/null
+++ b/arch/arm/configs/mmp2_defconfig
@@ -0,0 +1,1194 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Tue Jan 5 13:55:22 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910/MMP2 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_MACH_FLINT=y
+CONFIG_CPU_MMP2=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_MFD_88PM8607=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_88PM8607=y
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 6afa2c1..da4710d 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -176,6 +176,7 @@
#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
+CONFIG_MACH_TERASTATION_WXL=y
CONFIG_PLAT_ORION=y
#
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
deleted file mode 100644
index 3cabbb6..0000000
--- a/arch/arm/configs/mx1ads_defconfig
+++ /dev/null
@@ -1,742 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index edfdd6f..b4c1366 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -200,7 +200,7 @@
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 0000000..c88e952
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Tue Feb 2 15:20:48 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
+
+#
+# MX5 platforms:
+#
+CONFIG_MACH_MX51_BABBAGE=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_TZIC=y
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_IMX is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_MXC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 85b05d3..ee1ebd8 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov 7 20:52:21 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb 4 23:30:00 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
@@ -122,14 +129,41 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -158,6 +192,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -180,6 +215,7 @@
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# Orion Implementations
@@ -192,6 +228,7 @@
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
CONFIG_MACH_TS409=y
CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
@@ -268,12 +305,10 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
@@ -412,10 +447,6 @@
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
@@ -554,6 +585,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -562,6 +597,7 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
@@ -569,6 +605,7 @@
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -621,7 +658,9 @@
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +696,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
@@ -711,15 +751,16 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
@@ -736,7 +777,7 @@
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -842,8 +883,10 @@
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -866,6 +909,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -875,6 +919,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -993,11 +1038,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1006,7 +1046,6 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -1033,10 +1072,12 @@
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
@@ -1079,6 +1120,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -1104,6 +1146,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@@ -1118,6 +1161,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -1140,11 +1184,13 @@
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -1316,6 +1362,7 @@
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
@@ -1332,6 +1379,7 @@
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
@@ -1377,6 +1425,7 @@
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1398,7 +1447,9 @@
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1686,7 +1737,9 @@
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -1694,7 +1747,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 791b8c3..113511f 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,15 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:43:13 2009
+# Linux kernel version: 2.6.33-rc3
+# Tue Jan 12 08:57:10 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -35,6 +32,12 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@@ -46,11 +49,13 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -64,10 +69,10 @@
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -78,17 +83,20 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -98,6 +106,11 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -109,8 +122,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -118,31 +130,62 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -150,26 +193,30 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
# CONFIG_MACH_TAVOREVB is not set
#
@@ -177,6 +224,7 @@
#
CONFIG_MACH_ASPENITE=y
CONFIG_MACH_ZYLONITE2=y
+CONFIG_MACH_AVENGERS_LITE=y
# CONFIG_MACH_TTC_DKB is not set
CONFIG_CPU_PXA168=y
CONFIG_PLAT_PXA=y
@@ -187,7 +235,7 @@
CONFIG_CPU_MOHAWK=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@@ -201,7 +249,7 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_COMMON_CLKDEV=y
@@ -223,13 +271,15 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -237,12 +287,14 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -288,7 +340,6 @@
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -330,6 +381,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -343,6 +395,8 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -355,13 +409,13 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -374,6 +428,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
@@ -412,8 +467,10 @@
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -422,15 +479,12 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -442,6 +496,7 @@
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -449,6 +504,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -510,6 +566,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -530,11 +591,14 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -555,22 +619,8 @@
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -595,13 +645,17 @@
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -613,10 +667,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -627,6 +684,11 @@
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -673,6 +735,7 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -681,7 +744,6 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -706,6 +768,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -714,11 +777,15 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -738,28 +805,33 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -768,7 +840,9 @@
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
#
# Security options
@@ -776,13 +850,16 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -791,10 +868,12 @@
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -822,11 +901,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -863,6 +944,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -870,6 +952,7 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -884,7 +967,7 @@
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
new file mode 100644
index 0000000..acb1a8f
--- /dev/null
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -0,0 +1,1898 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov 1 21:57:32 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA320=y
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_PROTO=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_ISL29003=y
+CONFIG_TI_DAC7512=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=y
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_EETI=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+CONFIG_BATTERY_DS2760=m
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_LIS3_SPI=y
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_PXA3XX_GCU=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_RAUMFELD_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA_SOC_SSP=y
+CONFIG_SND_SOC_RAUMFELD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AK4104=y
+CONFIG_SND_SOC_CS4270=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_LT3593=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+CONFIG_CACHEFILES=y
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2f10dae..8e94c3c 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -187,7 +187,7 @@
CONFIG_PM_SIMTEC=y
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
CONFIG_MACH_SMDK=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -203,8 +203,8 @@
#
# Power management
#
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_DEV_HSMMC=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index f56e50f..5e7d4c1 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,14 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Mon Nov 3 10:10:30 2008
+# Linux kernel version: 2.6.33-rc4
+# Tue Jan 19 13:12:40 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -18,13 +15,13 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -34,13 +31,30 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -50,8 +64,13 @@
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -62,32 +81,38 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +120,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -107,33 +129,62 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -141,35 +192,62 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_S3C_DEV_FB=y
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_USB_HSOTG=y
+CONFIG_S3C_DEV_NAND=y
CONFIG_PLAT_S3C64XX=y
CONFIG_CPU_S3C6400_INIT=y
CONFIG_CPU_S3C6400_CLOCK=y
+# CONFIG_S3C64XX_DMA is not set
CONFIG_S3C64XX_SETUP_I2C0=y
CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_S3C64XX_SETUP_FB_24BPP=y
+CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
CONFIG_PLAT_S3C=y
#
# Boot options
#
CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
@@ -177,17 +255,16 @@
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
+# CONFIG_MACH_SMDK6400 is not set
CONFIG_CPU_S3C6410=y
CONFIG_S3C6410_SETUP_SDHCI=y
+# CONFIG_MACH_ANW6410 is not set
CONFIG_MACH_SMDK6410=y
CONFIG_SMDK6410_SD_CH0=y
# CONFIG_SMDK6410_SD_CH1 is not set
+# CONFIG_SMDK6410_WM1190_EV1 is not set
+# CONFIG_MACH_NCP is not set
+# CONFIG_MACH_HMT is not set
#
# Processor Type
@@ -196,7 +273,7 @@
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -212,8 +289,10 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
#
# Bus support
@@ -229,13 +308,15 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -243,26 +324,28 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
+# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
@@ -300,6 +383,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -314,14 +398,32 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -334,6 +436,7 @@
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -341,6 +444,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -357,27 +461,33 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -390,6 +500,7 @@
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -423,16 +534,18 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -443,6 +556,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_S3C2410=y
@@ -463,32 +577,33 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -497,10 +612,19 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@@ -509,17 +633,21 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -530,16 +658,24 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -549,15 +685,14 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -568,28 +703,22 @@
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -612,17 +741,15 @@
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
@@ -631,9 +758,13 @@
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
@@ -650,22 +781,24 @@
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Voltage and Current regulators
+# TI VLYNQ
#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -674,6 +807,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
@@ -683,9 +817,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -696,6 +833,11 @@
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -719,10 +861,7 @@
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -731,12 +870,17 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
@@ -755,6 +899,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -763,12 +908,16 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
@@ -787,34 +936,43 @@
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=0
#
@@ -823,13 +981,19 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -838,6 +1002,10 @@
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
new file mode 100644
index 0000000..279a15e
--- /dev/null
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -0,0 +1,969 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Sat Jan 9 16:33:55 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5P6440=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6440_INIT=y
+CONFIG_CPU_S5P6440_CLOCK=y
+CONFIG_CPU_S5P6440=y
+CONFIG_MACH_SMDK6440=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5P6440=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
new file mode 100644
index 0000000..74e20bf
--- /dev/null
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -0,0 +1,883 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Mon Jan 25 08:50:28 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+CONFIG_ARCH_S5P6442=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6442=y
+CONFIG_MACH_SMDK6442=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
new file mode 100644
index 0000000..6ea6361
--- /dev/null
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:54 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_SMDKV210 is not set
+CONFIG_MACH_SMDKC110=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
new file mode 100644
index 0000000..3f7d474
--- /dev/null
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:16 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+CONFIG_MACH_SMDKV210=y
+# CONFIG_MACH_SMDKC110 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
new file mode 100644
index 0000000..3ceb85e
--- /dev/null
+++ b/arch/arm/include/asm/entry-macro-vic2.S
@@ -0,0 +1,57 @@
+/* arch/arm/include/asm/entry-macro-vic2.S
+ *
+ * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for a device with two VICs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* This should be included from <mach/entry-macro.S> with the necessary
+ * defines for virtual addresses and IRQ bases for the two vics.
+ *
+ * The code needs the following defined:
+ * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ
+ * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ
+ * VA_VIC0 Virtual address of VIC0
+ * VA_VIC1 Virtual address of VIC1
+ *
+ * Note, code assumes VIC0's virtual address is an ARM immediate constant
+ * away from VIC1.
+*/
+
+#include <asm/hardware/vic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, #IRQ_VIC0_BASE + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
+ addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff..6700c7f 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,6 +75,18 @@
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
+#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT 9
+#define IT8152_LP_IRQ_COUNT 16
+#define IT8152_PD_IRQ_COUNT 15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
/* frequently used interrupts */
#define IT8152_PCISERR IT8152_PD_IRQ(14)
#define IT8152_H2PTADR IT8152_PD_IRQ(13)
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index 954b1be..74e51d6b 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -214,4 +214,8 @@
/* Frontlight control */
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
+struct locomo_platform_data {
+ int irq_base; /* IRQ base for cascaded on-chip IRQs */
+};
+
#endif
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 5da2595..92ed254 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -578,4 +578,8 @@
void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+struct sa1111_platform_data {
+ int irq_base; /* base for cascaded on-chip IRQs */
+};
+
#endif /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 786ac2b..50292cd 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -359,7 +359,9 @@
frame.fp = regs->ARM_fp;
frame.sp = regs->ARM_sp;
frame.lr = regs->ARM_lr;
- frame.pc = regs->ARM_pc;
+ /* PC might be corrupted, use LR in that case. */
+ frame.pc = kernel_text_address(regs->ARM_pc)
+ ? regs->ARM_pc : regs->ARM_lr;
} else if (tsk == current) {
frame.fp = (unsigned long)__builtin_frame_address(0);
frame.sp = current_sp;
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 309f351..2500f41 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -58,6 +58,12 @@
{
u32 sr = at91_sys_read(AT91_ST_SR) & irqmask;
+ /*
+ * irqs should be disabled here, but as the irq is shared they are only
+ * guaranteed to be off if the timer irq is registered first.
+ */
+ WARN_ON_ONCE(!irqs_disabled());
+
/* simulate "oneshot" timer with alarm */
if (sr & AT91_ST_ALMS) {
clkevt.event_handler(&clkevt);
@@ -132,24 +138,11 @@
static int
clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
{
- unsigned long flags;
u32 alm;
int status = 0;
BUG_ON(delta < 2);
- /* Use "raw" primitives so we behave correctly on RT kernels. */
- raw_local_irq_save(flags);
-
- /*
- * According to Thomas Gleixner irqs are already disabled here. Simply
- * removing raw_local_irq_save above (and the matching
- * raw_local_irq_restore) was not accepted. See
- * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
- * So for now (2008-11-20) just warn once if irqs were not disabled ...
- */
- WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
-
/* The alarm IRQ uses absolute time (now+delta), not the relative
* time (delta) in our calling convention. Like all clockevents
* using such "match" hardware, we have a race to defend against.
@@ -169,7 +162,6 @@
alm += delta;
at91_sys_write(AT91_ST_RTAR, alm);
- raw_local_irq_restore(flags);
return status;
}
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4bd56ae..608a632 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -62,16 +62,12 @@
static void
pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
{
- unsigned long flags;
-
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- /* update clocksource counter, then enable the IRQ */
- raw_local_irq_save(flags);
+ /* update clocksource counter */
pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
| AT91_PIT_PITIEN);
- raw_local_irq_restore(flags);
break;
case CLOCK_EVT_MODE_ONESHOT:
BUG();
@@ -100,6 +96,11 @@
*/
static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
{
+ /*
+ * irqs should be disabled here, but as the irq is shared they are only
+ * guaranteed to be off if the timer irq is registered first.
+ */
+ WARN_ON_ONCE(!irqs_disabled());
/* The PIT interrupt may be disabled, and is shared */
if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 806972a..5da2cf4 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -605,7 +605,7 @@
.dev = {
.dma_mask = &dove_xor0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&dove_xor00_data,
+ .platform_data = &dove_xor00_data,
},
};
@@ -631,7 +631,7 @@
.dev = {
.dma_mask = &dove_xor0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&dove_xor01_data,
+ .platform_data = &dove_xor01_data,
},
};
@@ -704,7 +704,7 @@
.dev = {
.dma_mask = &dove_xor1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&dove_xor10_data,
+ .platform_data = &dove_xor10_data,
},
};
@@ -730,7 +730,7 @@
.dev = {
.dma_mask = &dove_xor1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&dove_xor11_data,
+ .platform_data = &dove_xor11_data,
},
};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f6c6196..17879a8 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,12 @@
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
+config MACH_ESATA_SHEEVAPLUG
+ bool "Marvell eSATA SheevaPlug Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell eSATA SheevaPlug Reference Board.
+
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
help
@@ -46,18 +52,35 @@
QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
devices.
+config MACH_OPENRD
+ bool
+
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
+ select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Base Board.
+config MACH_OPENRD_CLIENT
+ bool "Marvell OpenRD Client Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Client Board.
+
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space v2 NAS.
+config MACH_INETSPACE_V2
+ bool "LaCie Internet Space v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Internet Space v2 NAS.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d4d7f53..a5530e3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,9 +5,11 @@
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
+obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 242dd07..f759ca2 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -656,7 +656,7 @@
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor00_data,
+ .platform_data = &kirkwood_xor00_data,
},
};
@@ -682,7 +682,7 @@
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor01_data,
+ .platform_data = &kirkwood_xor01_data,
},
};
@@ -755,7 +755,7 @@
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor10_data,
+ .platform_data = &kirkwood_xor10_data,
},
};
@@ -781,7 +781,7 @@
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&kirkwood_xor11_data,
+ .platform_data = &kirkwood_xor11_data,
},
};
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a06406..3ae158d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@
static struct gpio_led netspace_v2_gpio_led_pins[] = {
{
- .name = "ns_v2:red:fail",
- .gpio = NETSPACE_V2_GPIO_RED_LED,
+ .name = "ns_v2:blue:sata",
+ .default_trigger = "default-on",
+ .gpio = NETSPACE_V2_GPIO_BLUE_LED_CMD,
+ .active_low = 1,
+ },
+ {
+ .name = "ns_v2:red:fail",
+ .gpio = NETSPACE_V2_GPIO_RED_LED,
},
};
@@ -202,30 +208,19 @@
static void __init netspace_v2_gpio_leds_init(void)
{
+ int err;
+
+ /* Configure register slow_led to allow SATA activity LED blinking */
+ err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+ if (err == 0) {
+ err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+ if (err)
+ gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+ }
+ if (err)
+ pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
platform_device_register(&netspace_v2_gpio_leds);
-
- /*
- * Configure the front blue LED to blink in relation with the SATA
- * activity.
- */
- if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
- "SATA blue LED slow") != 0)
- return;
- if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
- goto err_free_1;
- if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
- "SATA blue LED command") != 0)
- goto err_free_1;
- if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
- goto err_free_2;
-
- return;
-
-err_free_2:
- gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
- gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
- pr_err("netspace_v2: failed to configure SATA blue LED\n");
}
/*****************************************************************************
@@ -314,6 +309,7 @@
pr_err("netspace_v2: failed to configure power-off GPIO\n");
}
+#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@
.init_irq = kirkwood_init_irq,
.timer = &netspace_v2_timer,
MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = netspace_v2_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 0000000..ad3f1ec
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+ .n_ports = 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+ .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+ MPP29_GPIO,
+ 0
+};
+
+static void __init openrd_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(openrd_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&openrd_ge00_data);
+ if (machine_is_openrd_client())
+ kirkwood_ge01_init(&openrd_ge01_data);
+ kirkwood_sata_init(&openrd_sata_data);
+ kirkwood_sdio_init(&openrd_mvsdio_data);
+
+ kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+ if (machine_is_openrd_base() || machine_is_openrd_client())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+ /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = openrd_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c7..0000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
- .n_ports = 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
- .gpio_card_detect = 29, /* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
- MPP29_GPIO,
- 0
-};
-
-static void __init openrd_base_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(openrd_base_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&openrd_base_ge00_data);
- kirkwood_sata_init(&openrd_base_sata_data);
- kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
- kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
- if (machine_is_openrd_base())
- kirkwood_pcie_init();
-
- return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
- /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = 0x00000100,
- .init_machine = openrd_base_init,
- .map_io = kirkwood_map_io,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319ee..a00879d 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
@@ -42,10 +43,19 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+ .n_ports = 2,
+};
+
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+ .gpio_write_protect = 44, /* MPP44 used as SD write protect */
+ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
+};
+
static struct gpio_led sheevaplug_led_pins[] = {
{
.name = "plug:green:health",
@@ -74,13 +84,26 @@
0
};
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP44_GPIO, /* SD Write Protect */
+ MPP47_GPIO, /* SD Card Detect */
+ MPP49_GPIO, /* LED Green */
+ 0
+};
+
static void __init sheevaplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
- kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ /* setup gpio pin select */
+ if (machine_is_sheeva_esata())
+ kirkwood_mpp_conf(sheeva_esata_mpp_config);
+ else
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
- kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ /* honor lower power consumption for plugs with out eSATA */
+ if (machine_is_sheeva_esata())
+ kirkwood_sata_init(&sheeva_esata_sata_data);
+
+ /* enable sd wp and sd cd on plugs with esata */
+ if (machine_is_sheeva_esata())
+ kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+ else
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_leds);
}
+#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index c6a564f..6ab843e 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,6 +1,6 @@
if ARCH_MMP
-menu "Marvell PXA168/910 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implmentations"
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
@@ -16,6 +16,13 @@
Say 'Y' here if you want to support the Marvell PXA168-based
Zylonite2 Development Board.
+config MACH_AVENGERS_LITE
+ bool "Marvell's PXA168 Avengers Lite Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Avengers Lite Development Board.
+
config MACH_TAVOREVB
bool "Marvell's PXA910 TavorEVB Development Board"
select CPU_PXA910
@@ -30,6 +37,26 @@
Say 'Y' here if you want to support the Marvell PXA910-based
TTC_DKB Development Board.
+config MACH_FLINT
+ bool "Marvell's Flint Development Platform"
+ select CPU_MMP2
+ help
+ Say 'Y' here if you want to support the Marvell MMP2-based
+ Flint Development Platform.
+ MMP2-based board can't be co-existed with PXA168-based &
+ PXA910-based development board. Since MMP2 is compatible to
+ ARMv6 architecture.
+
+config MACH_MARVELL_JASPER
+ bool "Marvell's Jasper Development Platform"
+ select CPU_MMP2
+ help
+ Say 'Y' here if you want to support the Marvell MMP2-base
+ Jasper Development Platform.
+ MMP2-based board can't be co-existed with PXA168-based &
+ PXA910-based development board. Since MMP2 is compatible to
+ ARMv6 architecture.
+
endmenu
config CPU_PXA168
@@ -44,4 +71,10 @@
help
Select code specific to PXA910
+config CPU_MMP2
+ bool
+ select CPU_V6
+ select CPU_32v6K
+ help
+ Select code specific to MMP2. MMP2 is ARMv6 compatible.
endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 6883e65..8b66d06 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,14 +2,18 @@
# Makefile for Marvell's PXA168 processors line
#
-obj-y += common.o clock.o devices.o irq.o time.o
+obj-y += common.o clock.o devices.o time.o
# SoC support
-obj-$(CONFIG_CPU_PXA168) += pxa168.o
-obj-$(CONFIG_CPU_PXA910) += pxa910.o
+obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o
+obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o
+obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o
+obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
+obj-$(CONFIG_MACH_FLINT) += flint.o
+obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
new file mode 100644
index 0000000..8c3fa5d1
--- /dev/null
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -0,0 +1,51 @@
+/*
+ * linux/arch/arm/mach-mmp/avengers_lite.c
+ *
+ * Support for the Marvell PXA168-based Avengers lite Development Platform.
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/irqs.h>
+
+
+#include "common.h"
+#include <linux/delay.h>
+
+/* Avengers lite MFP configurations */
+static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
+ /* DEBUG_UART */
+ GPIO88_UART2_TXD,
+ GPIO89_UART2_RXD,
+};
+
+static void __init avengers_lite_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
+
+ /* on-chip devices */
+ pxa168_add_uart(2);
+}
+
+MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = avengers_lite_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index c33fbbc..b4a0ba0 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,11 +3,15 @@
struct sys_timer;
extern void timer_init(int irq);
+extern void mmp2_clear_pmic_int(void);
extern struct sys_timer pxa168_timer;
extern struct sys_timer pxa910_timer;
+extern struct sys_timer mmp2_timer;
extern void __init pxa168_init_irq(void);
extern void __init pxa910_init_irq(void);
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
extern void __init icu_init_irq(void);
extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
new file mode 100644
index 0000000..4ec7709
--- /dev/null
+++ b/arch/arm/mach-mmp/flint.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-mmp/flint.c
+ *
+ * Support for the Marvell Flint Development Platform.
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long flint_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO45_UART1_RXD,
+ GPIO46_UART1_TXD,
+
+ /* UART2 */
+ GPIO47_UART2_RXD,
+ GPIO48_UART2_TXD,
+
+ /* SMC */
+ GPIO151_SMC_SCLK,
+ GPIO145_SMC_nCS0,
+ GPIO146_SMC_nCS1,
+ GPIO152_SMC_BE0,
+ GPIO153_SMC_BE1,
+ GPIO154_SMC_IRQ,
+ GPIO113_SMC_RDY,
+
+ /*Ethernet*/
+ GPIO155_GPIO155,
+
+ /* DFI */
+ GPIO168_DFI_D0,
+ GPIO167_DFI_D1,
+ GPIO166_DFI_D2,
+ GPIO165_DFI_D3,
+ GPIO107_DFI_D4,
+ GPIO106_DFI_D5,
+ GPIO105_DFI_D6,
+ GPIO104_DFI_D7,
+ GPIO111_DFI_D8,
+ GPIO164_DFI_D9,
+ GPIO163_DFI_D10,
+ GPIO162_DFI_D11,
+ GPIO161_DFI_D12,
+ GPIO110_DFI_D13,
+ GPIO109_DFI_D14,
+ GPIO108_DFI_D15,
+ GPIO143_ND_nCS0,
+ GPIO144_ND_nCS1,
+ GPIO147_ND_nWE,
+ GPIO148_ND_nRE,
+ GPIO150_ND_ALE,
+ GPIO149_ND_CLE,
+ GPIO112_ND_RDY0,
+ GPIO160_ND_RDY1,
+};
+
+static struct smc91x_platdata flint_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC_CS1_PHYS_BASE + 0x300,
+ .end = SMC_CS1_PHYS_BASE + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(155),
+ .end = gpio_to_irq(155),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &flint_smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void __init flint_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(flint_pin_config));
+
+ /* on-chip devices */
+ mmp2_add_uart(1);
+ mmp2_add_uart(2);
+
+ /* off-chip devices */
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(FLINT, "Flint Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = mmp2_init_irq,
+ .timer = &mmp2_timer,
+ .init_machine = flint_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 25e797b..83b1872 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -8,6 +8,7 @@
*
* PXA168 A0 0x41159263 0x56158400 0x00A0A333
* PXA910 Y0 0x41159262 0x56158000 0x00F0C910
+ * MMP2 Z0 0x560f5811
*/
#ifdef CONFIG_CPU_PXA168
@@ -24,7 +25,15 @@
# define __cpu_is_pxa910(id) (0)
#endif
+#ifdef CONFIG_CPU_MMP2
+# define __cpu_is_mmp2(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+#else
+# define __cpu_is_mmp2(id) (0)
+#endif
+
#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
+#define cpu_is_mmp2() ({ __cpu_is_mmp2(read_cpuid_id()); })
#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 2458539..1fa0a49 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -34,4 +34,16 @@
.size = _size, \
.dma = { _dma }, \
};
+
+#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc mmp2_device_##_name __initdata = { \
+ .dev_name = "mmp2-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_MMP2_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+}
+
extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 6d3cd35..c42d9d4 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -15,7 +15,12 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =ICU_AP_IRQ_SEL_INT_NUM
+ mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
+ and \tmp, \tmp, #0xff00
+ cmp \tmp, #0x5800
+ ldr \base, =ICU_VIRT_BASE
+ addne \base, \base, #0x10c @ PJ1 AP INT SEL register
+ addeq \base, \base, #0x104 @ PJ4 IRQ SEL register
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d68871b..0270119 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -113,10 +113,119 @@
#define IRQ_PXA910_AP_PMU 60
#define IRQ_PXA910_SM_INT 63 /* from PinMux */
-#define IRQ_GPIO_START 64
-#define IRQ_GPIO_NUM 128
+/*
+ * Interrupt numbers for MMP2
+ */
+#define IRQ_MMP2_NONE (-1)
+#define IRQ_MMP2_SSP1 0
+#define IRQ_MMP2_SSP2 1
+#define IRQ_MMP2_SSPA1 2
+#define IRQ_MMP2_SSPA2 3
+#define IRQ_MMP2_PMIC_MUX 4 /* PMIC & Charger */
+#define IRQ_MMP2_RTC_MUX 5
+#define IRQ_MMP2_TWSI1 7
+#define IRQ_MMP2_GPU 8
+#define IRQ_MMP2_KEYPAD 9
+#define IRQ_MMP2_ROTARY 10
+#define IRQ_MMP2_TRACKBALL 11
+#define IRQ_MMP2_ONEWIRE 12
+#define IRQ_MMP2_TIMER1 13
+#define IRQ_MMP2_TIMER2 14
+#define IRQ_MMP2_TIMER3 15
+#define IRQ_MMP2_RIPC 16
+#define IRQ_MMP2_TWSI_MUX 17 /* TWSI2 ~ TWSI6 */
+#define IRQ_MMP2_HDMI 19
+#define IRQ_MMP2_SSP3 20
+#define IRQ_MMP2_SSP4 21
+#define IRQ_MMP2_USB_HS1 22
+#define IRQ_MMP2_USB_HS2 23
+#define IRQ_MMP2_UART3 24
+#define IRQ_MMP2_UART1 27
+#define IRQ_MMP2_UART2 28
+#define IRQ_MMP2_MIPI_DSI 29
+#define IRQ_MMP2_CI2 30
+#define IRQ_MMP2_PMU_TIMER1 31
+#define IRQ_MMP2_PMU_TIMER2 32
+#define IRQ_MMP2_PMU_TIMER3 33
+#define IRQ_MMP2_USB_FS 34
+#define IRQ_MMP2_MISC_MUX 35
+#define IRQ_MMP2_WDT1 36
+#define IRQ_MMP2_NAND_DMA 37
+#define IRQ_MMP2_USIM 38
+#define IRQ_MMP2_MMC 39
+#define IRQ_MMP2_WTM 40
+#define IRQ_MMP2_LCD 41
+#define IRQ_MMP2_CI 42
+#define IRQ_MMP2_IRE 43
+#define IRQ_MMP2_USB_OTG 44
+#define IRQ_MMP2_NAND 45
+#define IRQ_MMP2_UART4 46
+#define IRQ_MMP2_DMA_FIQ 47
+#define IRQ_MMP2_DMA_RIQ 48
+#define IRQ_MMP2_GPIO 49
+#define IRQ_MMP2_SSP_MUX 51
+#define IRQ_MMP2_MMC2 52
+#define IRQ_MMP2_MMC3 53
+#define IRQ_MMP2_MMC4 54
+#define IRQ_MMP2_MIPI_HSI 55
+#define IRQ_MMP2_MSP 58
+#define IRQ_MMP2_MIPI_SLIM_DMA 59
+#define IRQ_MMP2_PJ4_FREQ_CHG 60
+#define IRQ_MMP2_MIPI_SLIM 62
+#define IRQ_MMP2_SM 63
+
+#define IRQ_MMP2_MUX_BASE 64
+
+/* secondary interrupt of INT #4 */
+#define IRQ_MMP2_PMIC_BASE (IRQ_MMP2_MUX_BASE)
+#define IRQ_MMP2_CHARGER (IRQ_MMP2_PMIC_BASE + 0)
+#define IRQ_MMP2_PMIC (IRQ_MMP2_PMIC_BASE + 1)
+
+/* secondary interrupt of INT #5 */
+#define IRQ_MMP2_RTC_BASE (IRQ_MMP2_PMIC_BASE + 2)
+#define IRQ_MMP2_RTC_ALARM (IRQ_MMP2_RTC_BASE + 0)
+#define IRQ_MMP2_RTC (IRQ_MMP2_RTC_BASE + 1)
+
+/* secondary interrupt of INT #17 */
+#define IRQ_MMP2_TWSI_BASE (IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI2 (IRQ_MMP2_TWSI_BASE + 0)
+#define IRQ_MMP2_TWSI3 (IRQ_MMP2_TWSI_BASE + 1)
+#define IRQ_MMP2_TWSI4 (IRQ_MMP2_TWSI_BASE + 2)
+#define IRQ_MMP2_TWSI5 (IRQ_MMP2_TWSI_BASE + 3)
+#define IRQ_MMP2_TWSI6 (IRQ_MMP2_TWSI_BASE + 4)
+
+/* secondary interrupt of INT #35 */
+#define IRQ_MMP2_MISC_BASE (IRQ_MMP2_TWSI_BASE + 5)
+#define IRQ_MMP2_PERF (IRQ_MMP2_MISC_BASE + 0)
+#define IRQ_MMP2_L2_PA_ECC (IRQ_MMP2_MISC_BASE + 1)
+#define IRQ_MMP2_L2_ECC (IRQ_MMP2_MISC_BASE + 2)
+#define IRQ_MMP2_L2_UECC (IRQ_MMP2_MISC_BASE + 3)
+#define IRQ_MMP2_DDR (IRQ_MMP2_MISC_BASE + 4)
+#define IRQ_MMP2_FAB0_TIMEOUT (IRQ_MMP2_MISC_BASE + 5)
+#define IRQ_MMP2_FAB1_TIMEOUT (IRQ_MMP2_MISC_BASE + 6)
+#define IRQ_MMP2_FAB2_TIMEOUT (IRQ_MMP2_MISC_BASE + 7)
+#define IRQ_MMP2_THERMAL (IRQ_MMP2_MISC_BASE + 9)
+#define IRQ_MMP2_MAIN_PMU (IRQ_MMP2_MISC_BASE + 10)
+#define IRQ_MMP2_WDT2 (IRQ_MMP2_MISC_BASE + 11)
+#define IRQ_MMP2_CORESIGHT (IRQ_MMP2_MISC_BASE + 12)
+#define IRQ_MMP2_COMMTX (IRQ_MMP2_MISC_BASE + 13)
+#define IRQ_MMP2_COMMRX (IRQ_MMP2_MISC_BASE + 14)
+
+/* secondary interrupt of INT #51 */
+#define IRQ_MMP2_SSP_BASE (IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_SSP1_SRDY (IRQ_MMP2_SSP_BASE + 0)
+#define IRQ_MMP2_SSP3_SRDY (IRQ_MMP2_SSP_BASE + 1)
+
+#define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2)
+
+#define IRQ_GPIO_START 128
+#define IRQ_GPIO_NUM 192
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
-#define NR_IRQS (IRQ_GPIO_START + IRQ_GPIO_NUM)
+/* Board IRQ - 64 by default, increase if not enough */
+#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 64)
+
+#define NR_IRQS (IRQ_BOARD_END)
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
new file mode 100644
index 0000000..9f9f814
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -0,0 +1,240 @@
+#ifndef __ASM_MACH_MFP_MMP2_H
+#define __ASM_MACH_MFP_MMP2_H
+
+#include <mach/mfp.h>
+
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
+/* GPIO */
+
+/* DFI */
+#define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0)
+#define GPIO109_DFI_D14 MFP_CFG(GPIO109, AF0)
+#define GPIO110_DFI_D13 MFP_CFG(GPIO110, AF0)
+#define GPIO161_DFI_D12 MFP_CFG(GPIO161, AF0)
+#define GPIO162_DFI_D11 MFP_CFG(GPIO162, AF0)
+#define GPIO163_DFI_D10 MFP_CFG(GPIO163, AF0)
+#define GPIO164_DFI_D9 MFP_CFG(GPIO164, AF0)
+#define GPIO111_DFI_D8 MFP_CFG(GPIO111, AF0)
+#define GPIO104_DFI_D7 MFP_CFG(GPIO104, AF0)
+#define GPIO105_DFI_D6 MFP_CFG(GPIO105, AF0)
+#define GPIO106_DFI_D5 MFP_CFG(GPIO106, AF0)
+#define GPIO107_DFI_D4 MFP_CFG(GPIO107, AF0)
+#define GPIO165_DFI_D3 MFP_CFG(GPIO165, AF0)
+#define GPIO166_DFI_D2 MFP_CFG(GPIO166, AF0)
+#define GPIO167_DFI_D1 MFP_CFG(GPIO167, AF0)
+#define GPIO168_DFI_D0 MFP_CFG(GPIO168, AF0)
+#define GPIO143_ND_nCS0 MFP_CFG(GPIO143, AF0)
+#define GPIO144_ND_nCS1 MFP_CFG(GPIO144, AF0)
+#define GPIO147_ND_nWE MFP_CFG(GPIO147, AF0)
+#define GPIO148_ND_nRE MFP_CFG(GPIO148, AF0)
+#define GPIO150_ND_ALE MFP_CFG(GPIO150, AF0)
+#define GPIO149_ND_CLE MFP_CFG(GPIO149, AF0)
+#define GPIO112_ND_RDY0 MFP_CFG(GPIO112, AF0)
+#define GPIO160_ND_RDY1 MFP_CFG(GPIO160, AF0)
+
+/* Static Memory Controller */
+#define GPIO145_SMC_nCS0 MFP_CFG(GPIO145, AF0)
+#define GPIO146_SMC_nCS1 MFP_CFG(GPIO146, AF0)
+#define GPIO152_SMC_BE0 MFP_CFG(GPIO152, AF0)
+#define GPIO153_SMC_BE1 MFP_CFG(GPIO153, AF0)
+#define GPIO154_SMC_IRQ MFP_CFG(GPIO154, AF0)
+#define GPIO113_SMC_RDY MFP_CFG(GPIO113, AF0)
+#define GPIO151_SMC_SCLK MFP_CFG(GPIO151, AF0)
+
+/* Ethernet */
+#define GPIO155_SM_ADVMUX MFP_CFG(GPIO155, AF2)
+#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1)
+
+/* UART1 */
+#define GPIO45_UART1_RXD MFP_CFG(GPIO45, AF1)
+#define GPIO46_UART1_TXD MFP_CFG(GPIO46, AF1)
+#define GPIO29_UART1_RXD MFP_CFG(GPIO29, AF1)
+#define GPIO30_UART1_TXD MFP_CFG(GPIO30, AF1)
+#define GPIO31_UART1_CTS MFP_CFG(GPIO31, AF1)
+#define GPIO32_UART1_RTS MFP_CFG(GPIO32, AF1)
+
+/* UART2 */
+#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART2_CTS MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART2_RTS MFP_CFG(GPIO50, AF1)
+
+/* UART3 */
+#define GPIO51_UART3_RXD MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART3_TXD MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART3_CTS MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART3_RTS MFP_CFG(GPIO54, AF1)
+
+/* MMC1 */
+#define GPIO124_MMC1_DAT7 MFP_CFG_DRV(GPIO124, AF1, FAST)
+#define GPIO125_MMC1_DAT6 MFP_CFG_DRV(GPIO125, AF1, FAST)
+#define GPIO129_MMC1_DAT5 MFP_CFG_DRV(GPIO129, AF1, FAST)
+#define GPIO130_MMC1_DAT4 MFP_CFG_DRV(GPIO130, AF1, FAST)
+#define GPIO131_MMC1_DAT3 MFP_CFG_DRV(GPIO131, AF1, FAST)
+#define GPIO132_MMC1_DAT2 MFP_CFG_DRV(GPIO132, AF1, FAST)
+#define GPIO133_MMC1_DAT1 MFP_CFG_DRV(GPIO133, AF1, FAST)
+#define GPIO134_MMC1_DAT0 MFP_CFG_DRV(GPIO134, AF1, FAST)
+#define GPIO136_MMC1_CMD MFP_CFG_DRV(GPIO136, AF1, FAST)
+#define GPIO139_MMC1_CLK MFP_CFG_DRV(GPIO139, AF1, FAST)
+#define GPIO140_MMC1_CD MFP_CFG_DRV(GPIO140, AF1, FAST)
+#define GPIO141_MMC1_WP MFP_CFG_DRV(GPIO141, AF1, FAST)
+
+/*MMC2*/
+#define GPIO37_MMC2_DAT3 MFP_CFG_DRV(GPIO37, AF1, FAST)
+#define GPIO38_MMC2_DAT2 MFP_CFG_DRV(GPIO38, AF1, FAST)
+#define GPIO39_MMC2_DAT1 MFP_CFG_DRV(GPIO39, AF1, FAST)
+#define GPIO40_MMC2_DAT0 MFP_CFG_DRV(GPIO40, AF1, FAST)
+#define GPIO41_MMC2_CMD MFP_CFG_DRV(GPIO41, AF1, FAST)
+#define GPIO42_MMC2_CLK MFP_CFG_DRV(GPIO42, AF1, FAST)
+
+/*MMC3*/
+#define GPIO165_MMC3_DAT7 MFP_CFG_DRV(GPIO165, AF2, FAST)
+#define GPIO162_MMC3_DAT6 MFP_CFG_DRV(GPIO162, AF2, FAST)
+#define GPIO166_MMC3_DAT5 MFP_CFG_DRV(GPIO166, AF2, FAST)
+#define GPIO163_MMC3_DAT4 MFP_CFG_DRV(GPIO163, AF2, FAST)
+#define GPIO167_MMC3_DAT3 MFP_CFG_DRV(GPIO167, AF2, FAST)
+#define GPIO164_MMC3_DAT2 MFP_CFG_DRV(GPIO164, AF2, FAST)
+#define GPIO168_MMC3_DAT1 MFP_CFG_DRV(GPIO168, AF2, FAST)
+#define GPIO111_MMC3_DAT0 MFP_CFG_DRV(GPIO111, AF2, FAST)
+#define GPIO112_MMC3_CMD MFP_CFG_DRV(GPIO112, AF2, FAST)
+#define GPIO151_MMC3_CLK MFP_CFG_DRV(GPIO151, AF2, FAST)
+
+/* LCD */
+#define GPIO74_LCD_FCLK MFP_CFG_DRV(GPIO74, AF1, FAST)
+#define GPIO75_LCD_LCLK MFP_CFG_DRV(GPIO75, AF1, FAST)
+#define GPIO76_LCD_PCLK MFP_CFG_DRV(GPIO76, AF1, FAST)
+#define GPIO77_LCD_DENA MFP_CFG_DRV(GPIO77, AF1, FAST)
+#define GPIO78_LCD_DD0 MFP_CFG_DRV(GPIO78, AF1, FAST)
+#define GPIO79_LCD_DD1 MFP_CFG_DRV(GPIO79, AF1, FAST)
+#define GPIO80_LCD_DD2 MFP_CFG_DRV(GPIO80, AF1, FAST)
+#define GPIO81_LCD_DD3 MFP_CFG_DRV(GPIO81, AF1, FAST)
+#define GPIO82_LCD_DD4 MFP_CFG_DRV(GPIO82, AF1, FAST)
+#define GPIO83_LCD_DD5 MFP_CFG_DRV(GPIO83, AF1, FAST)
+#define GPIO84_LCD_DD6 MFP_CFG_DRV(GPIO84, AF1, FAST)
+#define GPIO85_LCD_DD7 MFP_CFG_DRV(GPIO85, AF1, FAST)
+#define GPIO86_LCD_DD8 MFP_CFG_DRV(GPIO86, AF1, FAST)
+#define GPIO87_LCD_DD9 MFP_CFG_DRV(GPIO87, AF1, FAST)
+#define GPIO88_LCD_DD10 MFP_CFG_DRV(GPIO88, AF1, FAST)
+#define GPIO89_LCD_DD11 MFP_CFG_DRV(GPIO89, AF1, FAST)
+#define GPIO90_LCD_DD12 MFP_CFG_DRV(GPIO90, AF1, FAST)
+#define GPIO91_LCD_DD13 MFP_CFG_DRV(GPIO91, AF1, FAST)
+#define GPIO92_LCD_DD14 MFP_CFG_DRV(GPIO92, AF1, FAST)
+#define GPIO93_LCD_DD15 MFP_CFG_DRV(GPIO93, AF1, FAST)
+#define GPIO94_LCD_DD16 MFP_CFG_DRV(GPIO94, AF1, FAST)
+#define GPIO95_LCD_DD17 MFP_CFG_DRV(GPIO95, AF1, FAST)
+#define GPIO96_LCD_DD18 MFP_CFG_DRV(GPIO96, AF1, FAST)
+#define GPIO97_LCD_DD19 MFP_CFG_DRV(GPIO97, AF1, FAST)
+#define GPIO98_LCD_DD20 MFP_CFG_DRV(GPIO98, AF1, FAST)
+#define GPIO99_LCD_DD21 MFP_CFG_DRV(GPIO99, AF1, FAST)
+#define GPIO100_LCD_DD22 MFP_CFG_DRV(GPIO100, AF1, FAST)
+#define GPIO101_LCD_DD23 MFP_CFG_DRV(GPIO101, AF1, FAST)
+#define GPIO94_SPI_DCLK MFP_CFG_DRV(GPIO94, AF3, FAST)
+#define GPIO95_SPI_CS0 MFP_CFG_DRV(GPIO95, AF3, FAST)
+#define GPIO96_SPI_DIN MFP_CFG_DRV(GPIO96, AF3, FAST)
+#define GPIO97_SPI_DOUT MFP_CFG_DRV(GPIO97, AF3, FAST)
+#define GPIO98_LCD_RST MFP_CFG_DRV(GPIO98, AF0, FAST)
+
+#define GPIO114_MN_CLK_OUT MFP_CFG_DRV(GPIO114, AF1, FAST)
+
+/*LCD TV path*/
+#define GPIO124_LCD_DD24 MFP_CFG_DRV(GPIO124, AF2, FAST)
+#define GPIO125_LCD_DD25 MFP_CFG_DRV(GPIO125, AF2, FAST)
+#define GPIO126_LCD_DD33 MFP_CFG_DRV(GPIO126, AF2, FAST)
+#define GPIO127_LCD_DD26 MFP_CFG_DRV(GPIO127, AF2, FAST)
+#define GPIO128_LCD_DD27 MFP_CFG_DRV(GPIO128, AF2, FAST)
+#define GPIO129_LCD_DD28 MFP_CFG_DRV(GPIO129, AF2, FAST)
+#define GPIO130_LCD_DD29 MFP_CFG_DRV(GPIO130, AF2, FAST)
+#define GPIO135_LCD_DD30 MFP_CFG_DRV(GPIO135, AF2, FAST)
+#define GPIO137_LCD_DD31 MFP_CFG_DRV(GPIO137, AF2, FAST)
+#define GPIO138_LCD_DD32 MFP_CFG_DRV(GPIO138, AF2, FAST)
+#define GPIO140_LCD_DD34 MFP_CFG_DRV(GPIO140, AF2, FAST)
+#define GPIO141_LCD_DD35 MFP_CFG_DRV(GPIO141, AF2, FAST)
+
+/* I2C */
+#define GPIO43_TWSI2_SCL MFP_CFG_DRV(GPIO43, AF1, SLOW)
+#define GPIO44_TWSI2_SDA MFP_CFG_DRV(GPIO44, AF1, SLOW)
+#define GPIO71_TWSI3_SCL MFP_CFG_DRV(GPIO71, AF1, SLOW)
+#define GPIO72_TWSI3_SDA MFP_CFG_DRV(GPIO72, AF1, SLOW)
+#define GPIO99_TWSI5_SCL MFP_CFG_DRV(GPIO99, AF4, SLOW)
+#define GPIO100_TWSI5_SDA MFP_CFG_DRV(GPIO100, AF4, SLOW)
+#define GPIO97_TWSI6_SCL MFP_CFG_DRV(GPIO97, AF2, SLOW)
+#define GPIO98_TWSI6_SDA MFP_CFG_DRV(GPIO98, AF2, SLOW)
+
+/* SSPA1 */
+#define GPIO24_I2S_SYSCLK MFP_CFG(GPIO24, AF1)
+#define GPIO25_I2S_BITCLK MFP_CFG(GPIO25, AF1)
+#define GPIO26_I2S_SYNC MFP_CFG(GPIO26, AF1)
+#define GPIO27_I2S_DATA_OUT MFP_CFG(GPIO27, AF1)
+#define GPIO28_I2S_SDATA_IN MFP_CFG(GPIO28, AF1)
+#define GPIO114_I2S_MCLK MFP_CFG(GPIO114, AF1)
+
+/* SSPA2 */
+#define GPIO33_SSPA2_CLK MFP_CFG(GPIO33, AF1)
+#define GPIO34_SSPA2_FRM MFP_CFG(GPIO34, AF1)
+#define GPIO35_SSPA2_TXD MFP_CFG(GPIO35, AF1)
+#define GPIO36_SSPA2_RXD MFP_CFG(GPIO36, AF1)
+
+/* Keypad */
+#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
+#define GPIO20_KP_DKIN4 MFP_CFG(GPIO20, AF1)
+#define GPIO21_KP_DKIN5 MFP_CFG(GPIO21, AF1)
+#define GPIO22_KP_DKIN6 MFP_CFG(GPIO22, AF1)
+#define GPIO23_KP_DKIN7 MFP_CFG(GPIO23, AF1)
+
+/* CAMERA */
+#define GPIO59_CCIC_IN7 MFP_CFG_DRV(GPIO59, AF1, FAST)
+#define GPIO60_CCIC_IN6 MFP_CFG_DRV(GPIO60, AF1, FAST)
+#define GPIO61_CCIC_IN5 MFP_CFG_DRV(GPIO61, AF1, FAST)
+#define GPIO62_CCIC_IN4 MFP_CFG_DRV(GPIO62, AF1, FAST)
+#define GPIO63_CCIC_IN3 MFP_CFG_DRV(GPIO63, AF1, FAST)
+#define GPIO64_CCIC_IN2 MFP_CFG_DRV(GPIO64, AF1, FAST)
+#define GPIO65_CCIC_IN1 MFP_CFG_DRV(GPIO65, AF1, FAST)
+#define GPIO66_CCIC_IN0 MFP_CFG_DRV(GPIO66, AF1, FAST)
+#define GPIO67_CAM_HSYNC MFP_CFG_DRV(GPIO67, AF1, FAST)
+#define GPIO68_CAM_VSYNC MFP_CFG_DRV(GPIO68, AF1, FAST)
+#define GPIO69_CAM_MCLK MFP_CFG_DRV(GPIO69, AF1, FAST)
+#define GPIO70_CAM_PCLK MFP_CFG_DRV(GPIO70, AF1, FAST)
+
+/* Wifi */
+#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0)
+#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0)
+#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0)
+
+/* Codec*/
+#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0)
+
+#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0)
+
+/* PMIC */
+#define PMIC_PMIC_INT MFP_CFG(PMIC_INT, AF0)
+
+#endif /* __ASM_MACH_MFP_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 3b216bf..ded43c4 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -193,7 +193,9 @@
#define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3)
#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
-/* UART1 */
+/* UART */
+#define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2)
+#define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2)
#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
#define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST)
#define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
new file mode 100644
index 0000000..459f3be
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_MACH_MMP2_H
+#define __ASM_MACH_MMP2_H
+
+#include <linux/i2c.h>
+#include <mach/devices.h>
+#include <plat/i2c.h>
+
+extern struct pxa_device_desc mmp2_device_uart1;
+extern struct pxa_device_desc mmp2_device_uart2;
+extern struct pxa_device_desc mmp2_device_uart3;
+extern struct pxa_device_desc mmp2_device_uart4;
+extern struct pxa_device_desc mmp2_device_twsi1;
+extern struct pxa_device_desc mmp2_device_twsi2;
+extern struct pxa_device_desc mmp2_device_twsi3;
+extern struct pxa_device_desc mmp2_device_twsi4;
+extern struct pxa_device_desc mmp2_device_twsi5;
+extern struct pxa_device_desc mmp2_device_twsi6;
+
+static inline int mmp2_add_uart(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &mmp2_device_uart1; break;
+ case 2: d = &mmp2_device_uart2; break;
+ case 3: d = &mmp2_device_uart3; break;
+ case 4: d = &mmp2_device_uart4; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, NULL, 0);
+}
+
+static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
+ struct i2c_board_info *info, unsigned size)
+{
+ struct pxa_device_desc *d = NULL;
+ int ret;
+
+ switch (id) {
+ case 0: d = &mmp2_device_twsi1; break;
+ case 1: d = &mmp2_device_twsi2; break;
+ case 2: d = &mmp2_device_twsi3; break;
+ case 3: d = &mmp2_device_twsi4; break;
+ case 4: d = &mmp2_device_twsi5; break;
+ case 5: d = &mmp2_device_twsi6; break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = i2c_register_board_info(id, info, size);
+ if (ret)
+ return ret;
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
+#endif /* __ASM_MACH_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 98ccbee..712af03 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -69,6 +69,47 @@
#define APBC_PXA910_ASFAR APBC_REG(0x050)
#define APBC_PXA910_ASSAR APBC_REG(0x054)
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_MMP2_RTC APBC_REG(0x000)
+#define APBC_MMP2_TWSI1 APBC_REG(0x004)
+#define APBC_MMP2_TWSI2 APBC_REG(0x008)
+#define APBC_MMP2_TWSI3 APBC_REG(0x00c)
+#define APBC_MMP2_TWSI4 APBC_REG(0x010)
+#define APBC_MMP2_ONEWIRE APBC_REG(0x014)
+#define APBC_MMP2_KPC APBC_REG(0x018)
+#define APBC_MMP2_TB_ROTARY APBC_REG(0x01c)
+#define APBC_MMP2_SW_JTAG APBC_REG(0x020)
+#define APBC_MMP2_TIMERS APBC_REG(0x024)
+#define APBC_MMP2_UART1 APBC_REG(0x02c)
+#define APBC_MMP2_UART2 APBC_REG(0x030)
+#define APBC_MMP2_UART3 APBC_REG(0x034)
+#define APBC_MMP2_GPIO APBC_REG(0x038)
+#define APBC_MMP2_PWM0 APBC_REG(0x03c)
+#define APBC_MMP2_PWM1 APBC_REG(0x040)
+#define APBC_MMP2_PWM2 APBC_REG(0x044)
+#define APBC_MMP2_PWM3 APBC_REG(0x048)
+#define APBC_MMP2_SSP0 APBC_REG(0x04c)
+#define APBC_MMP2_SSP1 APBC_REG(0x050)
+#define APBC_MMP2_SSP2 APBC_REG(0x054)
+#define APBC_MMP2_SSP3 APBC_REG(0x058)
+#define APBC_MMP2_SSP4 APBC_REG(0x05c)
+#define APBC_MMP2_SSP5 APBC_REG(0x060)
+#define APBC_MMP2_AIB APBC_REG(0x064)
+#define APBC_MMP2_ASFAR APBC_REG(0x068)
+#define APBC_MMP2_ASSAR APBC_REG(0x06c)
+#define APBC_MMP2_USIM APBC_REG(0x070)
+#define APBC_MMP2_MPMU APBC_REG(0x074)
+#define APBC_MMP2_IPC APBC_REG(0x078)
+#define APBC_MMP2_TWSI5 APBC_REG(0x07c)
+#define APBC_MMP2_TWSI6 APBC_REG(0x080)
+#define APBC_MMP2_TWSI_INTSTS APBC_REG(0x084)
+#define APBC_MMP2_UART4 APBC_REG(0x088)
+#define APBC_MMP2_RIPC APBC_REG(0x08c)
+#define APBC_MMP2_THSENS1 APBC_REG(0x090) /* Thermal Sensor */
+#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4)
+
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
index e5f0872..f882d91 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -17,10 +17,12 @@
#define ICU_REG(x) (ICU_VIRT_BASE + (x))
#define ICU_INT_CONF(n) ICU_REG((n) << 2)
+#define ICU_INT_CONF_MASK (0xf)
+
+/************ PXA168/PXA910 (MMP) *********************/
#define ICU_INT_CONF_AP_INT (1 << 6)
#define ICU_INT_CONF_CP_INT (1 << 5)
#define ICU_INT_CONF_IRQ (1 << 4)
-#define ICU_INT_CONF_MASK (0xf)
#define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108) /* AP FIQ Selected Interrupt */
#define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C) /* AP IRQ Selected Interrupt */
@@ -28,4 +30,42 @@
#define ICU_INT_STATUS_0 ICU_REG(0x128) /* Interrupt Stuats 0 */
#define ICU_INT_STATUS_1 ICU_REG(0x12C) /* Interrupt Status 1 */
+/************************** MMP2 ***********************/
+
+/*
+ * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
+ * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
+ */
+#define ICU_INT_ROUTE_SP_IRQ (1 << 4)
+#define ICU_INT_ROUTE_PJ4_IRQ (1 << 5)
+#define ICU_INT_ROUTE_PJ4_FIQ (1 << 6)
+
+#define MMP2_ICU_PJ4_IRQ_STATUS0 ICU_REG(0x138)
+#define MMP2_ICU_PJ4_IRQ_STATUS1 ICU_REG(0x13c)
+#define MMP2_ICU_PJ4_FIQ_STATUS0 ICU_REG(0x140)
+#define MMP2_ICU_PJ4_FIQ_STATUS1 ICU_REG(0x144)
+
+#define MMP2_ICU_INT4_STATUS ICU_REG(0x150)
+#define MMP2_ICU_INT5_STATUS ICU_REG(0x154)
+#define MMP2_ICU_INT17_STATUS ICU_REG(0x158)
+#define MMP2_ICU_INT35_STATUS ICU_REG(0x15c)
+#define MMP2_ICU_INT51_STATUS ICU_REG(0x160)
+
+#define MMP2_ICU_INT4_MASK ICU_REG(0x168)
+#define MMP2_ICU_INT5_MASK ICU_REG(0x16C)
+#define MMP2_ICU_INT17_MASK ICU_REG(0x170)
+#define MMP2_ICU_INT35_MASK ICU_REG(0x174)
+#define MMP2_ICU_INT51_MASK ICU_REG(0x178)
+
+#define MMP2_ICU_SP_IRQ_SEL ICU_REG(0x100)
+#define MMP2_ICU_PJ4_IRQ_SEL ICU_REG(0x104)
+#define MMP2_ICU_PJ4_FIQ_SEL ICU_REG(0x108)
+
+#define MMP2_ICU_INVERT ICU_REG(0x164)
+
+#define MMP2_ICU_INV_PMIC (1 << 0)
+#define MMP2_ICU_INV_PERF (1 << 1)
+#define MMP2_ICU_INV_COMMTX (1 << 2)
+#define MMP2_ICU_INV_COMMRX (1 << 3)
+
#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index c93d5fa..a7dcc53 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -8,15 +8,16 @@
#include <linux/serial_reg.h>
#include <mach/addr-map.h>
+#include <asm/mach-types.h>
#define UART1_BASE (APB_PHYS_BASE + 0x36000)
#define UART2_BASE (APB_PHYS_BASE + 0x17000)
#define UART3_BASE (APB_PHYS_BASE + 0x18000)
+static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
static inline void putc(char c)
{
- volatile unsigned long *UART = (unsigned long *)UART2_BASE;
-
/* UART enabled? */
if (!(UART[UART_IER] & UART_IER_UUE))
return;
@@ -34,8 +35,14 @@
{
}
+static inline void arch_decomp_setup(void)
+{
+ if (machine_is_avengers_lite())
+ UART = (unsigned long *)UART3_BASE;
+}
+
/*
* nothing to do
*/
-#define arch_decomp_setup()
+
#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
new file mode 100644
index 0000000..cb18221
--- /dev/null
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-mmp/irq-mmp2.c
+ *
+ * Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ * Copyright: Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+static void icu_mask_irq(unsigned int irq)
+{
+ uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+ r &= ~ICU_INT_ROUTE_PJ4_IRQ;
+ __raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+ uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+ r |= ICU_INT_ROUTE_PJ4_IRQ;
+ __raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+ .name = "icu_irq",
+ .mask = icu_mask_irq,
+ .mask_ack = icu_mask_irq,
+ .unmask = icu_unmask_irq,
+};
+
+static void pmic_irq_ack(unsigned int irq)
+{
+ if (irq == IRQ_MMP2_PMIC)
+ mmp2_clear_pmic_int();
+}
+
+#define SECOND_IRQ_MASK(_name_, irq_base, prefix) \
+static void _name_##_mask_irq(unsigned int irq) \
+{ \
+ uint32_t r; \
+ r = __raw_readl(prefix##_MASK) | (1 << (irq - irq_base)); \
+ __raw_writel(r, prefix##_MASK); \
+}
+
+#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix) \
+static void _name_##_unmask_irq(unsigned int irq) \
+{ \
+ uint32_t r; \
+ r = __raw_readl(prefix##_MASK) & ~(1 << (irq - irq_base)); \
+ __raw_writel(r, prefix##_MASK); \
+}
+
+#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix) \
+static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc) \
+{ \
+ unsigned long status, mask, n; \
+ mask = __raw_readl(prefix##_MASK); \
+ while (1) { \
+ status = __raw_readl(prefix##_STATUS) & ~mask; \
+ if (status == 0) \
+ break; \
+ n = find_first_bit(&status, BITS_PER_LONG); \
+ while (n < BITS_PER_LONG) { \
+ generic_handle_irq(irq_base + n); \
+ n = find_next_bit(&status, BITS_PER_LONG, n+1); \
+ } \
+ } \
+}
+
+#define SECOND_IRQ_CHIP(_name_, irq_base, prefix) \
+SECOND_IRQ_MASK(_name_, irq_base, prefix) \
+SECOND_IRQ_UNMASK(_name_, irq_base, prefix) \
+SECOND_IRQ_DEMUX(_name_, irq_base, prefix) \
+static struct irq_chip _name_##_irq_chip = { \
+ .name = #_name_, \
+ .mask = _name_##_mask_irq, \
+ .unmask = _name_##_unmask_irq, \
+}
+
+SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
+SECOND_IRQ_CHIP(rtc, IRQ_MMP2_RTC_BASE, MMP2_ICU_INT5);
+SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
+SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
+SECOND_IRQ_CHIP(ssp, IRQ_MMP2_SSP_BASE, MMP2_ICU_INT51);
+
+static void init_mux_irq(struct irq_chip *chip, int start, int num)
+{
+ int irq;
+
+ for (irq = start; num > 0; irq++, num--) {
+ /* mask and clear the IRQ */
+ chip->mask(irq);
+ if (chip->ack)
+ chip->ack(irq);
+
+ set_irq_chip(irq, chip);
+ set_irq_flags(irq, IRQF_VALID);
+ set_irq_handler(irq, handle_level_irq);
+ }
+}
+
+void __init mmp2_init_icu(void)
+{
+ int irq;
+
+ for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
+ icu_mask_irq(irq);
+ set_irq_chip(irq, &icu_irq_chip);
+ set_irq_flags(irq, IRQF_VALID);
+
+ switch (irq) {
+ case IRQ_MMP2_PMIC_MUX:
+ case IRQ_MMP2_RTC_MUX:
+ case IRQ_MMP2_TWSI_MUX:
+ case IRQ_MMP2_MISC_MUX:
+ case IRQ_MMP2_SSP_MUX:
+ break;
+ default:
+ set_irq_handler(irq, handle_level_irq);
+ break;
+ }
+ }
+
+ /* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
+ * to be written to clear the interrupt
+ */
+ pmic_irq_chip.ack = pmic_irq_ack;
+
+ init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
+ init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
+ init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
+ init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
+ init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
+
+ set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
+ set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
+ set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
+ set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
+ set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
+}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq-pxa168.c
similarity index 100%
rename from arch/arm/mach-mmp/irq.c
rename to arch/arm/mach-mmp/irq-pxa168.c
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644
index 0000000..cfd4d66
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/arm/mach-mmp/jasper.c
+ *
+ * Support for the Marvell Jasper Development Platform.
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long jasper_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO29_UART1_RXD,
+ GPIO30_UART1_TXD,
+
+ /* UART3 */
+ GPIO51_UART3_RXD,
+ GPIO52_UART3_TXD,
+
+ /* DFI */
+ GPIO168_DFI_D0,
+ GPIO167_DFI_D1,
+ GPIO166_DFI_D2,
+ GPIO165_DFI_D3,
+ GPIO107_DFI_D4,
+ GPIO106_DFI_D5,
+ GPIO105_DFI_D6,
+ GPIO104_DFI_D7,
+ GPIO111_DFI_D8,
+ GPIO164_DFI_D9,
+ GPIO163_DFI_D10,
+ GPIO162_DFI_D11,
+ GPIO161_DFI_D12,
+ GPIO110_DFI_D13,
+ GPIO109_DFI_D14,
+ GPIO108_DFI_D15,
+ GPIO143_ND_nCS0,
+ GPIO144_ND_nCS1,
+ GPIO147_ND_nWE,
+ GPIO148_ND_nRE,
+ GPIO150_ND_ALE,
+ GPIO149_ND_CLE,
+ GPIO112_ND_RDY0,
+ GPIO160_ND_RDY1,
+};
+
+static void __init jasper_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+ /* on-chip devices */
+ mmp2_add_uart(1);
+ mmp2_add_uart(3);
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = mmp2_init_irq,
+ .timer = &mmp2_timer,
+ .init_machine = jasper_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
new file mode 100644
index 0000000..72eb9da
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-mmp/mmp2.c
+ *
+ * code name MMP2
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/mfp.h>
+#include <mach/gpio.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
+
+#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
+
+static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+ MFP_ADDR(PMIC_INT, 0x2c4),
+
+ MFP_ADDR_END,
+};
+
+void mmp2_clear_pmic_int(void)
+{
+ unsigned long mfpr_pmic, data;
+
+ mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
+ data = __raw_readl(mfpr_pmic);
+ __raw_writel(data | (1 << 6), mfpr_pmic);
+ __raw_writel(data, mfpr_pmic);
+}
+
+static void __init mmp2_init_gpio(void)
+{
+ int i;
+
+ /* enable GPIO clock */
+ __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
+
+ /* unmask GPIO edge detection for all 6 banks -- APMASKx */
+ for (i = 0; i < 6; i++)
+ __raw_writel(0xffffffff, APMASK(i));
+
+ pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
+}
+
+void __init mmp2_init_irq(void)
+{
+ mmp2_init_icu();
+ mmp2_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
+static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
+static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
+static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
+static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+
+static struct clk_lookup mmp2_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+ INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+ INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+ INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+ INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+};
+
+static int __init mmp2_init(void)
+{
+ if (cpu_is_mmp2()) {
+ mfp_init_base(MFPR_VIRT_BASE);
+ mfp_init_addr(mmp2_addr_map);
+ clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(mmp2_init);
+
+/* on-chip devices */
+MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
+MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
+MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
+MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
+MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
+MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
+MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
+MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
+MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
+MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
+MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index a8400bb..cf75694 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -30,7 +30,10 @@
#include <mach/addr-map.h>
#include <mach/regs-timers.h>
+#include <mach/regs-apbc.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <asm/mach/time.h>
#include "clock.h"
@@ -158,7 +161,7 @@
__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
- ccr &= TMR_CCR_CS_0(0x3);
+ ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
/* free-running mode */
@@ -197,3 +200,24 @@
clocksource_register(&cksrc);
clockevents_register_device(&ckevt);
}
+
+static void __init mmp2_timer_init(void)
+{
+ unsigned long clk_rst;
+
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+ /*
+ * enable bus/functional clock, enable 6.5MHz (divider 4),
+ * release reset
+ */
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+ __raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+ timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+ .init = mmp2_timer_init,
+};
+
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index 6fbe68f..f2d309d 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -14,6 +14,12 @@
Say 'Y' here if you want your kernel to support the
Marvell RD-78x00-mASA Reference Design.
+config MACH_TERASTATION_WXL
+ bool "Buffalo WLX (Terastation Duo) NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo WXL Nas.
+
endmenu
endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index da628b7..67a13f9 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,4 @@
-obj-y += common.o addr-map.o irq.o pcie.o
+obj-y += common.o addr-map.o mpp.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 0000000..61e5e58
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+ .n_ports = 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+ I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+ MPP0_GE1_TXCLK,
+ MPP1_GE1_TXCTL,
+ MPP2_GE1_RXCTL,
+ MPP3_GE1_RXCLK,
+ MPP4_GE1_TXD0,
+ MPP5_GE1_TXD1,
+ MPP6_GE1_TXD2,
+ MPP7_GE1_TXD3,
+ MPP8_GE1_RXD0,
+ MPP9_GE1_RXD1,
+ MPP10_GE1_RXD2,
+ MPP11_GE1_RXD3,
+ MPP12_GPIO,
+ MPP13_SYSRST_OUTn,
+ MPP14_SATA1_ACTn,
+ MPP15_SATA0_ACTn,
+ MPP16_GPIO,
+ MPP17_GPIO,
+ MPP18_GPIO,
+ MPP19_GPIO,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP24_UA2_TXD,
+ MPP25_UA2_RXD,
+ MPP26_UA2_CTSn,
+ MPP27_UA2_RTSn,
+ MPP28_GPIO,
+ MPP29_SYSRST_OUTn,
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ MPP33_GPIO,
+ MPP34_GPIO,
+ MPP35_GPIO,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_GPIO,
+ MPP40_UNUSED,
+ MPP41_UNUSED,
+ MPP42_UNUSED,
+ MPP43_UNUSED,
+ MPP44_UNUSED,
+ MPP45_UNUSED,
+ MPP46_UNUSED,
+ MPP47_UNUSED,
+ MPP48_SATA1_ACTn,
+ MPP49_SATA0_ACTn,
+ 0
+};
+
+
+static void __init wxl_init(void)
+{
+ /*
+ * Basic MV78xx0 setup. Needs to be called early.
+ */
+ mv78xx0_init();
+ mv78xx0_mpp_conf(wxl_mpp_config);
+
+ /*
+ * Partition on-chip peripherals between the two CPU cores.
+ */
+ mv78xx0_ehci0_init();
+ mv78xx0_ehci1_init();
+ mv78xx0_ehci2_init();
+ mv78xx0_ge00_init(&db78x00_ge00_data);
+ mv78xx0_ge01_init(&db78x00_ge01_data);
+ mv78xx0_sata_init(&db78x00_sata_data);
+ mv78xx0_uart0_init();
+ mv78xx0_uart1_init();
+ mv78xx0_uart2_init();
+ mv78xx0_uart3_init();
+ mv78xx0_i2c_init();
+ i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+ if (machine_is_terastation_wxl()) {
+ /*
+ * Assign the x16 PCIe slot on the board to CPU core
+ * #0, and let CPU core #1 have the four x1 slots.
+ */
+ if (mv78xx0_core_index() == 0)
+ mv78xx0_pcie_init(0, 1);
+ else
+ mv78xx0_pcie_init(1, 0);
+ }
+
+ return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+ /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+ .phys_io = MV78XX0_REGS_PHYS_BASE,
+ .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = wxl_init,
+ .map_io = mv78xx0_map_io,
+ .init_irq = mv78xx0_init_irq,
+ .timer = &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 0000000..354ac51
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+ u32 dev, rev;
+
+ mv78xx0_pcie_id(&dev, &rev);
+
+ if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+ return MPP_78100_A0_MASK;
+
+ printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+ "(dev %#x rev %#x)\n", dev, rev);
+ return 0;
+}
+
+#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS (1 + MPP_MAX/8)
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+ u32 mpp_ctrl[MPP_NR_REGS];
+ unsigned int variant_mask;
+ int i;
+
+ variant_mask = mv78xx0_variant();
+ if (!variant_mask)
+ return;
+
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
+ printk(KERN_DEBUG "initial MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ mpp_ctrl[i] = readl(MPP_CTRL(i));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+
+ while (*mpp_list) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift, gpio_mode;
+
+ if (num > MPP_MAX) {
+ printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
+ "number (%u)\n", num);
+ continue;
+ }
+ if (!(*mpp_list & variant_mask)) {
+ printk(KERN_WARNING
+ "mv78xx0_mpp_conf: requested MPP%u config "
+ "unavailable on this hardware\n", num);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+
+ gpio_mode = 0;
+ if (*mpp_list & MPP_INPUT_MASK)
+ gpio_mode |= GPIO_INPUT_OK;
+ if (*mpp_list & MPP_OUTPUT_MASK)
+ gpio_mode |= GPIO_OUTPUT_OK;
+ if (sel != 0)
+ gpio_mode = 0;
+ orion_gpio_set_valid(num, gpio_mode);
+
+ mpp_list++;
+ }
+
+ printk(KERN_DEBUG " final MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ writel(mpp_ctrl[i], MPP_CTRL(i));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
new file mode 100644
index 0000000..80840b7
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
+ *
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MV78X00_MPP_H
+#define __MV78X00_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _78100_A0) (\
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13) | \
+ /* available on A0 */ ((!!(_78100_A0)) << 14))
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+ /* num sel i o 78100_A0 */
+
+#define MPP_INPUT_MASK MPP(0, 0x0, 1, 0, 0)
+#define MPP_OUTPUT_MASK MPP(0, 0x0, 0, 1, 0)
+
+#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1)
+
+#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1)
+#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1)
+#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1)
+#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1)
+
+#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1)
+#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1)
+#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1)
+#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1)
+
+#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1)
+#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1)
+#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1)
+#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1)
+
+#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1)
+#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1)
+#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1)
+#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1)
+
+#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1)
+#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1)
+#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1)
+#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1)
+
+#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1)
+#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1)
+#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1)
+#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1)
+
+#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1)
+#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1)
+#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1)
+#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1)
+
+#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1)
+#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1)
+#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1)
+#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1)
+
+#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1)
+#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1)
+#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1)
+#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1)
+
+#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1)
+#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1)
+#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1)
+#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1)
+
+#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1)
+#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1)
+#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1)
+#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1)
+
+#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1)
+#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1)
+#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1)
+#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1)
+
+#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1)
+#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1)
+#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1)
+#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1)
+#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1)
+#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1)
+
+#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1)
+#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1)
+#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1)
+#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1)
+#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1)
+#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1)
+
+#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1)
+#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1)
+#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1)
+#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1)
+#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1)
+#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1)
+
+#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1)
+#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1)
+#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1)
+#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1)
+#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1)
+#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1)
+
+#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1)
+#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1)
+#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1)
+#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1)
+#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1)
+#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1)
+
+
+#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1)
+#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1)
+#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1)
+#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1)
+#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1)
+#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1)
+
+
+#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1)
+#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1)
+#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1)
+
+
+
+#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1)
+#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1)
+#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1)
+
+
+#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1)
+#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1)
+#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1)
+
+
+
+#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1)
+#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1)
+#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1)
+
+
+
+#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1)
+#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1)
+#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1)
+#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1)
+
+
+
+#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1)
+#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1)
+#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1)
+#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1)
+
+
+#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1)
+#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1)
+#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1)
+
+
+#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1)
+#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1)
+#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1)
+
+
+#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1)
+#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1)
+#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1)
+
+
+#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1)
+#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1)
+#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1)
+
+
+#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1)
+#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1)
+#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1)
+
+#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1)
+#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1)
+#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1)
+#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1)
+
+#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1)
+#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1)
+
+#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1)
+#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1)
+#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1)
+
+
+#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1)
+#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1)
+#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1)
+#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1)
+
+
+#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1)
+#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1)
+#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1)
+
+
+
+#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1)
+#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1)
+#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1)
+
+
+
+#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1)
+#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1)
+#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1)
+
+#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1)
+#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1)
+#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1)
+#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1)
+
+
+#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1)
+#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1)
+#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1)
+#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1)
+#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1)
+#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1)
+#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1)
+#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1)
+#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1)
+#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1)
+#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1)
+#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1)
+#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1)
+
+
+
+#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1)
+#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1)
+#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1)
+
+
+
+#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1)
+#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1)
+#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1)
+
+
+
+#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1)
+#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1)
+#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1)
+
+
+
+#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1)
+#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1)
+#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1)
+
+
+
+#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1)
+#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1)
+#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1)
+
+
+
+#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1)
+#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1)
+#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1)
+#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1)
+
+
+#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1)
+#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1)
+#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1)
+
+
+#define MPP47_GPIO MPP(47, 0x1, 1, 1, 1)
+#define MPP47_UNUSED MPP(47, 0x0, 0, 0, 1)
+
+
+
+#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1)
+#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1)
+#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1)
+
+
+
+#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1)
+#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1)
+#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1)
+#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1)
+
+
+#define MPP_MAX 49
+
+void mv78xx0_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index 7f86fe0..fc2ddf8 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,11 +4,12 @@
# Object file lists.
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-y += generic.o clock.o devices.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
similarity index 95%
rename from arch/arm/mach-mx1/mx1ads.c
rename to arch/arm/mach-mx1/mach-mx1ads.c
index 30f04e5..51f3cfd 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-imx/mx1ads.c
+ * arch/arm/mach-imx/mach-mx1ads.c
*
* Initially based on:
* linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
@@ -27,7 +27,7 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
#include <mach/irqs.h>
#include "devices.h"
@@ -147,7 +147,7 @@
/* Maintainer: Sascha Hauer, Pengutronix */
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
@@ -157,7 +157,7 @@
MACHINE_START(MXLADS, "Freescale MXLADS")
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
similarity index 97%
rename from arch/arm/mach-mx1/scb9328.c
rename to arch/arm/mach-mx1/mach-scb9328.c
index 325d98d..7587a7a 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-mx1/scb9328.c
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
*
* Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
* Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
@@ -23,7 +23,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
#include "devices.h"
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index b96c6a3..742fd4e 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -37,6 +37,7 @@
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
depends on MACH_MX27
+ select MXC_ULPI if USB_ULPI
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
@@ -55,7 +56,7 @@
endchoice
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
depends on MACH_MX27
help
@@ -64,14 +65,14 @@
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
- depends on MACH_EUKREA_CPUIMX27
+ depends on MACH_CPUIMX27
help
This adds support for the internal SDHC2 used on CPUIMX27 used
for wifi or eMMC.
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX27
+ depends on MACH_CPUIMX27
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +91,7 @@
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_MX27LITE
+config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
depends on MACH_MX27
help
@@ -100,6 +101,7 @@
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
depends on MACH_MX27
+ select MXC_ULPI if USB_ULPI
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 52aca0aa..e3254fa 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,21 +4,20 @@
# Object file lists.
-obj-y := generic.o devices.o serial.o
+obj-y := devices.o serial.o
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e82b489..bb419ef 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -23,11 +23,242 @@
#include <linux/module.h>
#include <mach/clock.h>
+#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET 29
+#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET 26
+#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET 24
+#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES (1 << 22)
+#define CCM_CSCR_MPLLRES (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET 20
+#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET 19
+#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET 18
+#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+#define CCM_CSCR_BCLK_OFFSET 10
+#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET 9
+#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN 1
+
+#define CCM_MPCTL0_CPLM (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET 26
+#define CCM_MPCTL0_PD_MASK (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET 16
+#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET 10
+#define CCM_MPCTL0_MFI_MASK (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET 0
+#define CCM_MPCTL0_MFN_MASK 0x3ff
+
+#define CCM_MPCTL1_LF (1 << 15)
+#define CCM_MPCTL1_BRMO (1 << 6)
+
+#define CCM_SPCTL0_CPLM (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET 26
+#define CCM_SPCTL0_PD_MASK (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET 16
+#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET 10
+#define CCM_SPCTL0_MFI_MASK (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET 0
+#define CCM_SPCTL0_MFN_MASK 0x3ff
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET 16
+#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET 8
+#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET 0
+#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET 12
+#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET 5
+#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET 0
+#define CCM_PCDR0_FIRIDIV_MASK 0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET 24
+#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET 16
+#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET 8
+#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET 0
+#define CCM_PCDR1_PERDIV1_MASK 0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET 31
+#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET 30
+#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET 28
+#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET 27
+#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET 26
+#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
+#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
+#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET 23
+#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET 22
+#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET 21
+#define CCM_PCCR_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET 20
+#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET 19
+#define CCM_PCCR_NFC_REG CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET 18
+#define CCM_PCCR_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET 17
+#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET 16
+#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET 15
+#define CCM_PCCR_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET 14
+#define CCM_PCCR_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET 13
+#define CCM_PCCR_DMA_REG CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET 12
+#define CCM_PCCR_I2C1_REG CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET 11
+#define CCM_PCCR_GPIO_REG CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET 10
+#define CCM_PCCR_SDHC2_REG CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET 9
+#define CCM_PCCR_SDHC1_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET 8
+#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET 7
+#define CCM_PCCR_SSI2_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET 6
+#define CCM_PCCR_SSI1_REG CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET 5
+#define CCM_PCCR_CSPI2_REG CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET 4
+#define CCM_PCCR_CSPI1_REG CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET 3
+#define CCM_PCCR_UART4_REG CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET 2
+#define CCM_PCCR_UART3_REG CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET 1
+#define CCM_PCCR_UART2_REG CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET 0
+#define CCM_PCCR_UART1_REG CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET 31
+#define CCM_PCCR_OWIRE_REG CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET 30
+#define CCM_PCCR_KPP_REG CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET 29
+#define CCM_PCCR_RTC_REG CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET 28
+#define CCM_PCCR_PWM_REG CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET 27
+#define CCM_PCCR_GPT3_REG CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET 26
+#define CCM_PCCR_GPT2_REG CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET 25
+#define CCM_PCCR_GPT1_REG CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET 24
+#define CCM_PCCR_WDT_REG CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET 23
+#define CCM_PCCR_CSPI3_REG CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR (1 << 15)
+
+#define CCM_CCSR_CLKMODE1 (1 << 9)
+#define CCM_CCSR_CLKMODE0 (1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK 0x1f
+
+#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
+#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
static int _clk_enable(struct clk *clk)
{
@@ -1002,6 +1233,7 @@
clk_enable(&uart_clk[0]);
#endif
- mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+ mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+ MX21_INT_GPT1);
return 0;
}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 18c53a6..0f0823c 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -29,21 +29,23 @@
#include <mach/common.h>
#include <mach/hardware.h>
+#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
/* Register offsets */
-#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_UPDATE_DIS (1 << 31)
#define CCM_CSCR_SSI2 (1 << 23)
@@ -753,7 +755,8 @@
clk_enable(&uart1_clk);
#endif
- mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+ mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+ MX27_INT_GPT1);
return 0;
}
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d9e3bf9..d8d3b2d 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -39,7 +39,8 @@
* the silicon revision very early we read it here to
* avoid any further hooks
*/
- val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+ val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ + SYS_CHIP_ID));
cpu_silicon_rev = (int)(val >> 28);
cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
deleted file mode 100644
index 749de76..0000000
--- a/arch/arm/mach-mx2/crm_regs.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET 29
-#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET 24
-#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES (1 << 22)
-#define CCM_CSCR_MPLLRES (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET 20
-#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET 19
-#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET 18
-#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET 9
-#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN 1
-
-
-
-#define CCM_MPCTL0_CPLM (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET 26
-#define CCM_MPCTL0_PD_MASK (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET 16
-#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET 10
-#define CCM_MPCTL0_MFI_MASK (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET 0
-#define CCM_MPCTL0_MFN_MASK 0x3ff
-
-#define CCM_MPCTL1_LF (1 << 15)
-#define CCM_MPCTL1_BRMO (1 << 6)
-
-#define CCM_SPCTL0_CPLM (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET 26
-#define CCM_SPCTL0_PD_MASK (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET 16
-#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET 10
-#define CCM_SPCTL0_MFI_MASK (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET 0
-#define CCM_SPCTL0_MFN_MASK 0x3ff
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET 16
-#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET 8
-#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET 0
-#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET 12
-#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET 5
-#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET 0
-#define CCM_PCDR0_FIRIDIV_MASK 0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET 24
-#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET 16
-#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET 8
-#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET 0
-#define CCM_PCDR1_PERDIV1_MASK 0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET 31
-#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET 30
-#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET 28
-#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET 27
-#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET 26
-#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
-#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
-#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET 23
-#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET 22
-#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET 21
-#define CCM_PCCR_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET 20
-#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET 19
-#define CCM_PCCR_NFC_REG CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET 18
-#define CCM_PCCR_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET 17
-#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET 16
-#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET 15
-#define CCM_PCCR_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET 14
-#define CCM_PCCR_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET 13
-#define CCM_PCCR_DMA_REG CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET 12
-#define CCM_PCCR_I2C1_REG CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET 11
-#define CCM_PCCR_GPIO_REG CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET 10
-#define CCM_PCCR_SDHC2_REG CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET 9
-#define CCM_PCCR_SDHC1_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET 8
-#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET 7
-#define CCM_PCCR_SSI2_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET 6
-#define CCM_PCCR_SSI1_REG CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET 5
-#define CCM_PCCR_CSPI2_REG CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET 4
-#define CCM_PCCR_CSPI1_REG CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET 3
-#define CCM_PCCR_UART4_REG CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET 2
-#define CCM_PCCR_UART3_REG CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET 1
-#define CCM_PCCR_UART2_REG CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET 0
-#define CCM_PCCR_UART1_REG CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET 31
-#define CCM_PCCR_OWIRE_REG CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET 30
-#define CCM_PCCR_KPP_REG CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET 29
-#define CCM_PCCR_RTC_REG CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET 28
-#define CCM_PCCR_PWM_REG CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET 27
-#define CCM_PCCR_GPT3_REG CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET 26
-#define CCM_PCCR_GPT2_REG CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET 25
-#define CCM_PCCR_GPT1_REG CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET 24
-#define CCM_PCCR_WDT_REG CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET 23
-#define CCM_PCCR_CSPI3_REG CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR (1 << 15)
-
-#define CCM_CCSR_CLKMODE1 (1 << 9)
-#define CCM_CCSR_CLKMODE0 (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK 0x1f
-
-#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
-#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 3956d82..b91e412 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -47,65 +47,31 @@
* - i.MX21: 2 channel
* - i.MX27: 3 channel
*/
-static struct resource mxc_spi_resources0[] = {
- {
- .start = CSPI1_BASE_ADDR,
- .end = CSPI1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_CSPI1,
- .end = MXC_INT_CSPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
+#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \
+ static struct resource mxc_spi_resources ## n[] = { \
+ { \
+ .start = baseaddr, \
+ .end = baseaddr + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }; \
+ \
+ struct platform_device mxc_spi_device ## n = { \
+ .name = "spi_imx", \
+ .id = n, \
+ .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \
+ .resource = mxc_spi_resources ## n, \
+ }
-static struct resource mxc_spi_resources1[] = {
- {
- .start = CSPI2_BASE_ADDR,
- .end = CSPI2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_CSPI2,
- .end = MXC_INT_CSPI2,
- .flags = IORESOURCE_IRQ,
- },
-};
+DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
+DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
#ifdef CONFIG_MACH_MX27
-static struct resource mxc_spi_resources2[] = {
- {
- .start = CSPI3_BASE_ADDR,
- .end = CSPI3_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_CSPI3,
- .end = MXC_INT_CSPI3,
- .flags = IORESOURCE_IRQ,
- },
-};
-#endif
-
-struct platform_device mxc_spi_device0 = {
- .name = "spi_imx",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_spi_resources0),
- .resource = mxc_spi_resources0,
-};
-
-struct platform_device mxc_spi_device1 = {
- .name = "spi_imx",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_spi_resources1),
- .resource = mxc_spi_resources1,
-};
-
-#ifdef CONFIG_MACH_MX27
-struct platform_device mxc_spi_device2 = {
- .name = "spi_imx",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_spi_resources2),
- .resource = mxc_spi_resources2,
-};
+DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
#endif
/*
@@ -113,104 +79,34 @@
* - i.MX21: 3 timers
* - i.MX27: 6 timers
*/
-
-/* We use gpt0 as system timer, so do not add a device for this one */
-
-static struct resource timer1_resources[] = {
- {
- .start = GPT2_BASE_ADDR,
- .end = GPT2_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_GPT2,
- .end = MXC_INT_GPT2,
- .flags = IORESOURCE_IRQ,
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \
+ static struct resource timer ## n ##_resources[] = { \
+ { \
+ .start = baseaddr, \
+ .end = baseaddr + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+ }; \
+ \
+ struct platform_device mxc_gpt ## n = { \
+ .name = "imx_gpt", \
+ .id = n, \
+ .num_resources = ARRAY_SIZE(timer ## n ## _resources), \
+ .resource = timer ## n ## _resources, \
}
-};
-struct platform_device mxc_gpt1 = {
- .name = "imx_gpt",
- .id = 1,
- .num_resources = ARRAY_SIZE(timer1_resources),
- .resource = timer1_resources,
-};
-
-static struct resource timer2_resources[] = {
- {
- .start = GPT3_BASE_ADDR,
- .end = GPT3_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_GPT3,
- .end = MXC_INT_GPT3,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_gpt2 = {
- .name = "imx_gpt",
- .id = 2,
- .num_resources = ARRAY_SIZE(timer2_resources),
- .resource = timer2_resources,
-};
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
#ifdef CONFIG_MACH_MX27
-static struct resource timer3_resources[] = {
- {
- .start = GPT4_BASE_ADDR,
- .end = GPT4_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_GPT4,
- .end = MXC_INT_GPT4,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_gpt3 = {
- .name = "imx_gpt",
- .id = 3,
- .num_resources = ARRAY_SIZE(timer3_resources),
- .resource = timer3_resources,
-};
-
-static struct resource timer4_resources[] = {
- {
- .start = GPT5_BASE_ADDR,
- .end = GPT5_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_GPT5,
- .end = MXC_INT_GPT5,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_gpt4 = {
- .name = "imx_gpt",
- .id = 4,
- .num_resources = ARRAY_SIZE(timer4_resources),
- .resource = timer4_resources,
-};
-
-static struct resource timer5_resources[] = {
- {
- .start = GPT6_BASE_ADDR,
- .end = GPT6_BASE_ADDR + 0x17,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_GPT6,
- .end = MXC_INT_GPT6,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_gpt5 = {
- .name = "imx_gpt",
- .id = 5,
- .num_resources = ARRAY_SIZE(timer5_resources),
- .resource = timer5_resources,
-};
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
#endif
/*
@@ -221,9 +117,9 @@
*/
static struct resource mxc_wdt_resources[] = {
{
- .start = WDOG_BASE_ADDR,
- .end = WDOG_BASE_ADDR + 0x30,
- .flags = IORESOURCE_MEM,
+ .start = MX2x_WDOG_BASE_ADDR,
+ .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
},
};
@@ -236,8 +132,8 @@
static struct resource mxc_w1_master_resources[] = {
{
- .start = OWIRE_BASE_ADDR,
- .end = OWIRE_BASE_ADDR + SZ_4K - 1,
+ .start = MX2x_OWIRE_BASE_ADDR,
+ .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
@@ -249,24 +145,33 @@
.resource = mxc_w1_master_resources,
};
-static struct resource mxc_nand_resources[] = {
- {
- .start = NFC_BASE_ADDR,
- .end = NFC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_NANDFC,
- .end = MXC_INT_NANDFC,
- .flags = IORESOURCE_IRQ,
- },
-};
+#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \
+ static struct resource pfx ## _nand_resources[] = { \
+ { \
+ .start = baseaddr, \
+ .end = baseaddr + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }; \
+ \
+ struct platform_device pfx ## _nand_device = { \
+ .name = "mxc_nand", \
+ .id = 0, \
+ .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \
+ .resource = pfx ## _nand_resources, \
+ }
-struct platform_device mxc_nand_device = {
- .name = "mxc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_nand_resources),
- .resource = mxc_nand_resources,
-};
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
+#endif
/*
* lcdc:
@@ -276,12 +181,12 @@
*/
static struct resource mxc_fb[] = {
{
- .start = LCDC_BASE_ADDR,
- .end = LCDC_BASE_ADDR + 0xFFF,
+ .start = MX2x_LCDC_BASE_ADDR,
+ .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_LCDC,
- .end = MXC_INT_LCDC,
+ .start = MX2x_INT_LCDC,
+ .end = MX2x_INT_LCDC,
.flags = IORESOURCE_IRQ,
}
};
@@ -300,13 +205,13 @@
#ifdef CONFIG_MACH_MX27
static struct resource mxc_fec_resources[] = {
{
- .start = FEC_BASE_ADDR,
- .end = FEC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
+ .start = MX27_FEC_BASE_ADDR,
+ .end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_FEC,
- .end = MXC_INT_FEC,
- .flags = IORESOURCE_IRQ,
+ .start = MX27_INT_FEC,
+ .end = MX27_INT_FEC,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -318,55 +223,41 @@
};
#endif
-static struct resource mxc_i2c_1_resources[] = {
- {
- .start = I2C_BASE_ADDR,
- .end = I2C_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_I2C,
- .end = MXC_INT_I2C,
- .flags = IORESOURCE_IRQ,
+#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \
+ static struct resource mxc_i2c_resources ## n[] = { \
+ { \
+ .start = baseaddr, \
+ .end = baseaddr + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ } \
+ }; \
+ \
+ struct platform_device mxc_i2c_device ## n = { \
+ .name = "imx-i2c", \
+ .id = n, \
+ .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \
+ .resource = mxc_i2c_resources ## n, \
}
-};
-struct platform_device mxc_i2c_device0 = {
- .name = "imx-i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
- .resource = mxc_i2c_1_resources,
-};
+DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
#ifdef CONFIG_MACH_MX27
-static struct resource mxc_i2c_2_resources[] = {
- {
- .start = I2C2_BASE_ADDR,
- .end = I2C2_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_I2C2,
- .end = MXC_INT_I2C2,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_i2c_device1 = {
- .name = "imx-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
- .resource = mxc_i2c_2_resources,
-};
+DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
#endif
static struct resource mxc_pwm_resources[] = {
{
- .start = PWM_BASE_ADDR,
- .end = PWM_BASE_ADDR + 0x0fff,
- .flags = IORESOURCE_MEM,
+ .start = MX2x_PWM_BASE_ADDR,
+ .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_PWM,
- .end = MXC_INT_PWM,
- .flags = IORESOURCE_IRQ,
+ .start = MX2x_INT_PWM,
+ .end = MX2x_INT_PWM,
+ .flags = IORESOURCE_IRQ,
}
};
@@ -377,77 +268,49 @@
.resource = mxc_pwm_resources,
};
-/*
- * Resource definition for the MXC SDHC
- */
-static struct resource mxc_sdhc1_resources[] = {
- {
- .start = SDHC1_BASE_ADDR,
- .end = SDHC1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_SDHC1,
- .end = MXC_INT_SDHC1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = DMA_REQ_SDHC1,
- .end = DMA_REQ_SDHC1,
- .flags = IORESOURCE_DMA,
- },
-};
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \
+ static struct resource mxc_sdhc_resources ## n[] = { \
+ { \
+ .start = baseaddr, \
+ .end = baseaddr + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ }, { \
+ .start = dmareq, \
+ .end = dmareq, \
+ .flags = IORESOURCE_DMA, \
+ }, \
+ }; \
+ \
+ static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32); \
+ \
+ struct platform_device mxc_sdhc_device ## n = { \
+ .name = "mxc-mmc", \
+ .id = n, \
+ .dev = { \
+ .dma_mask = &mxc_sdhc ## n ## _dmamask, \
+ .coherent_dma_mask = DMA_BIT_MASK(32), \
+ }, \
+ .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \
+ .resource = mxc_sdhc_resources ## n, \
+ }
-static u64 mxc_sdhc1_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device mxc_sdhc_device0 = {
- .name = "mxc-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &mxc_sdhc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
- .resource = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_sdhc2_resources[] = {
- {
- .start = SDHC2_BASE_ADDR,
- .end = SDHC2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_SDHC2,
- .end = MXC_INT_SDHC2,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = DMA_REQ_SDHC2,
- .end = DMA_REQ_SDHC2,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static u64 mxc_sdhc2_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device mxc_sdhc_device1 = {
- .name = "mxc-mmc",
- .id = 1,
- .dev = {
- .dma_mask = &mxc_sdhc2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(mxc_sdhc2_resources),
- .resource = mxc_sdhc2_resources,
-};
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
#ifdef CONFIG_MACH_MX27
static struct resource otg_resources[] = {
{
- .start = OTG_BASE_ADDR,
- .end = OTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
+ .start = MX27_USBOTG_BASE_ADDR,
+ .end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_USB3,
- .end = MXC_INT_USB3,
- .flags = IORESOURCE_IRQ,
+ .start = MX27_INT_USB3,
+ .end = MX27_INT_USB3,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -483,12 +346,12 @@
static struct resource mxc_usbh1_resources[] = {
{
- .start = OTG_BASE_ADDR + 0x200,
- .end = OTG_BASE_ADDR + 0x3ff,
+ .start = MX27_USBOTG_BASE_ADDR + 0x200,
+ .end = MX27_USBOTG_BASE_ADDR + 0x3ff,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_USB1,
- .end = MXC_INT_USB1,
+ .start = MX27_INT_USB1,
+ .end = MX27_INT_USB1,
.flags = IORESOURCE_IRQ,
},
};
@@ -509,12 +372,12 @@
static struct resource mxc_usbh2_resources[] = {
{
- .start = OTG_BASE_ADDR + 0x400,
- .end = OTG_BASE_ADDR + 0x5ff,
+ .start = MX27_USBOTG_BASE_ADDR + 0x400,
+ .end = MX27_USBOTG_BASE_ADDR + 0x5ff,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_USB2,
- .end = MXC_INT_USB2,
+ .start = MX27_INT_USB2,
+ .end = MX27_INT_USB2,
.flags = IORESOURCE_IRQ,
},
};
@@ -531,129 +394,102 @@
};
#endif
-static struct resource imx_ssi_resources0[] = {
- {
- .start = SSI1_BASE_ADDR,
- .end = SSI1_BASE_ADDR + 0x6F,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_SSI1,
- .end = MXC_INT_SSI1,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "tx0",
- .start = DMA_REQ_SSI1_TX0,
- .end = DMA_REQ_SSI1_TX0,
- .flags = IORESOURCE_DMA,
- }, {
- .name = "rx0",
- .start = DMA_REQ_SSI1_RX0,
- .end = DMA_REQ_SSI1_RX0,
- .flags = IORESOURCE_DMA,
- }, {
- .name = "tx1",
- .start = DMA_REQ_SSI1_TX1,
- .end = DMA_REQ_SSI1_TX1,
- .flags = IORESOURCE_DMA,
- }, {
- .name = "rx1",
- .start = DMA_REQ_SSI1_RX1,
- .end = DMA_REQ_SSI1_RX1,
- .flags = IORESOURCE_DMA,
- },
-};
+#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \
+ { \
+ .name = _name, \
+ .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
+ .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
+ .flags = IORESOURCE_DMA, \
+ }
-static struct resource imx_ssi_resources1[] = {
- {
- .start = SSI2_BASE_ADDR,
- .end = SSI2_BASE_ADDR + 0x6F,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_SSI2,
- .end = MXC_INT_SSI2,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "tx0",
- .start = DMA_REQ_SSI2_TX0,
- .end = DMA_REQ_SSI2_TX0,
- .flags = IORESOURCE_DMA,
- }, {
- .name = "rx0",
- .start = DMA_REQ_SSI2_RX0,
- .end = DMA_REQ_SSI2_RX0,
- .flags = IORESOURCE_DMA,
- }, {
- .name = "tx1",
- .start = DMA_REQ_SSI2_TX1,
- .end = DMA_REQ_SSI2_TX1,
- .flags = IORESOURCE_DMA,
- }, {
- .name = "rx1",
- .start = DMA_REQ_SSI2_RX1,
- .end = DMA_REQ_SSI2_RX1,
- .flags = IORESOURCE_DMA,
- },
-};
+#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \
+ static struct resource imx_ssi_resources ## n[] = { \
+ { \
+ .start = MX2x_SSI ## ssin ## _BASE_ADDR, \
+ .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \
+ .flags = IORESOURCE_MEM, \
+ }, { \
+ .start = MX2x_INT_SSI1, \
+ .end = MX2x_INT_SSI1, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \
+ DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \
+ DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \
+ DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \
+ }; \
+ \
+ struct platform_device imx_ssi_device ## n = { \
+ .name = "imx-ssi", \
+ .id = n, \
+ .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \
+ .resource = imx_ssi_resources ## n, \
+ }
-struct platform_device imx_ssi_device0 = {
- .name = "imx-ssi",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_ssi_resources0),
- .resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
- .name = "imx-ssi",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_ssi_resources1),
- .resource = imx_ssi_resources1,
-};
+DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .irq = MXC_INT_GPIO,
- .base = IO_ADDRESS(GPIO_BASE_ADDR),
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- }, {
- .chip.label = "gpio-1",
- .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- }, {
- .chip.label = "gpio-2",
- .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- }, {
- .chip.label = "gpio-3",
- .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- }, {
- .chip.label = "gpio-4",
- .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
- .virtual_irq_start = MXC_GPIO_IRQ_START + 128,
- }, {
- .chip.label = "gpio-5",
- .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
- .virtual_irq_start = MXC_GPIO_IRQ_START + 160,
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \
+ { \
+ .chip.label = "gpio-" #n, \
+ .irq = _irq, \
+ .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
+ n * 0x100), \
+ .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
}
-};
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n) \
+ { \
+ .chip.label = "gpio-" #n, \
+ .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
+ n * 0x100), \
+ .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
+ }
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \
+ static struct mxc_gpio_port pfx ## _gpio_ports[] = { \
+ DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \
+ DEFINE_MXC_GPIO_PORT(SOC, 1), \
+ DEFINE_MXC_GPIO_PORT(SOC, 2), \
+ DEFINE_MXC_GPIO_PORT(SOC, 3), \
+ DEFINE_MXC_GPIO_PORT(SOC, 4), \
+ DEFINE_MXC_GPIO_PORT(SOC, 5), \
+ }
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+#endif
int __init mxc_register_gpios(void)
{
- return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+#ifdef CONFIG_MACH_MX21
+ if (cpu_is_mx21())
+ return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+ else
+#endif
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27())
+ return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+ else
+#endif
+ return 0;
}
#ifdef CONFIG_MACH_MX21
static struct resource mx21_usbhc_resources[] = {
{
- .start = USBOTG_BASE_ADDR,
- .end = USBOTG_BASE_ADDR + 0x1FFF,
+ .start = MX21_BASE_ADDR,
+ .end = MX21_BASE_ADDR + 0x1FFF,
.flags = IORESOURCE_MEM,
},
{
- .start = MXC_INT_USBHOST,
- .end = MXC_INT_USBHOST,
+ .start = MX21_INT_USBHOST,
+ .end = MX21_INT_USBHOST,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index f12694b..84ed513 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,8 +1,10 @@
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_gpt3;
extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
+#endif
extern struct platform_device mxc_wdt;
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
@@ -11,12 +13,19 @@
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_uart_device5;
extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
+#ifdef CONFIG_MACH_MX21
+extern struct platform_device imx21_nand_device;
+#endif
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx27_nand_device;
+#endif
extern struct platform_device mxc_fb_device;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_pwm_device;
extern struct platform_device mxc_i2c_device0;
+#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_i2c_device1;
+#endif
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
extern struct platform_device mxc_otg_udc_device;
@@ -25,7 +34,9 @@
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
+#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_spi_device2;
+#endif
extern struct platform_device mx21_usbhc_device;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index 7382b6d..f3b169d 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -28,7 +28,7 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
similarity index 91%
rename from arch/arm/mach-mx2/eukrea_cpuimx27.c
rename to arch/arm/mach-mx2/mach-cpuimx27.c
index 7b18760..1f616dca 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/mach-cpuimx27.c
@@ -36,7 +36,7 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
@@ -142,28 +142,28 @@
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
static struct plat_serial8250_port serial_platform_data[] = {
{
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
.irq = IRQ_GPIOB(23),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
.irq = IRQ_GPIOB(22),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
.irq = IRQ_GPIOB(27),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
.irq = IRQ_GPIOB(30),
.uartclk = 14745600,
.regshift = 1,
@@ -189,7 +189,8 @@
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+ mxc_register_device(&imx27_nand_device,
+ &eukrea_cpuimx27_nand_board_info);
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
@@ -224,9 +225,9 @@
};
MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = eukrea_cpuimx27_init,
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
similarity index 93%
rename from arch/arm/mach-mx2/mx27lite.c
rename to arch/arm/mach-mx2/mach-imx27lite.c
index 82ea227..b5710bf 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mach-imx27lite.c
@@ -27,7 +27,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/board-mx27lite.h>
#include "devices.h"
@@ -85,9 +85,9 @@
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mx27lite_init,
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
similarity index 94%
rename from arch/arm/mach-mx2/mx21ads.c
rename to arch/arm/mach-mx2/mach-mx21ads.c
index cf5f77c..113e58d 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mach-mx21ads.c
@@ -30,7 +30,7 @@
#include <asm/mach/map.h>
#include <mach/imx-uart.h>
#include <mach/imxfb.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx21.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#include <mach/board-mx21ads.h>
@@ -118,8 +118,8 @@
};
static struct resource mx21ads_flash_resource = {
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + 0x02000000 - 1,
+ .start = MX21_CS0_BASE_ADDR,
+ .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
.flags = IORESOURCE_MEM,
};
@@ -242,7 +242,7 @@
*/
{
.virtual = MX21ADS_MMIO_BASE_ADDR,
- .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
.length = MX21ADS_MMIO_SIZE,
.type = MT_DEVICE,
},
@@ -268,7 +268,7 @@
mxc_register_device(&mxc_uart_device3, &uart_pdata);
mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
- mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+ mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
@@ -284,9 +284,9 @@
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX21_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX21_PHYS_OFFSET + 0x100,
.map_io = mx21ads_map_io,
.init_irq = mx21_init_irq,
.init_machine = mx21ads_board_init,
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
similarity index 92%
rename from arch/arm/mach-mx2/mx27pdk.c
rename to arch/arm/mach-mx2/mach-mx27_3ds.c
index 6761d1b..b2f4e0d 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mach-mx27_3ds.c
@@ -26,7 +26,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/board-mx27pdk.h>
#include "devices.h"
@@ -85,9 +85,9 @@
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mx27pdk_init,
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
similarity index 96%
rename from arch/arm/mach-mx2/mx27ads.c
rename to arch/arm/mach-mx2/mach-mx27ads.c
index 83e412b..6ce3236 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -33,7 +33,7 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/board-mx27ads.h>
#include <mach/mxc_nand.h>
#include <mach/i2c.h>
@@ -290,7 +290,7 @@
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
- mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+ mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
@@ -320,7 +320,7 @@
static struct map_desc mx27ads_io_desc[] __initdata = {
{
.virtual = PBC_BASE_ADDRESS,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
.length = SZ_1M,
.type = MT_DEVICE,
},
@@ -334,9 +334,9 @@
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27ads_map_io,
.init_irq = mx27_init_irq,
.init_machine = mx27ads_board_init,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c
similarity index 96%
rename from arch/arm/mach-mx2/mxt_td60.c
rename to arch/arm/mach-mx2/mach-mxt_td60.c
index 8bcc1a5..bc38559 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mach-mxt_td60.c
@@ -33,7 +33,7 @@
#include <asm/mach/map.h>
#include <linux/gpio.h>
#include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
#include <mach/i2c.h>
#include <linux/i2c/pca953x.h>
@@ -257,7 +257,7 @@
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+ mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -284,9 +284,9 @@
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mxt_td60_board_init,
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
new file mode 100644
index 0000000..778fff2
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+
+static int pca100_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* SDHC */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* onboard I2C */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* external I2C */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+ /* OTG */
+ OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+ PC7_PF_USBOTG_DATA5,
+ PC8_PF_USBOTG_DATA6,
+ PC9_PF_USBOTG_DATA0,
+ PC10_PF_USBOTG_DATA2,
+ PC11_PF_USBOTG_DATA1,
+ PC12_PF_USBOTG_DATA4,
+ PC13_PF_USBOTG_DATA3,
+ PE0_PF_USBOTG_NXT,
+ PE1_PF_USBOTG_STP,
+ PE2_PF_USBOTG_DIR,
+ PE24_PF_USBOTG_CLK,
+ PE25_PF_USBOTG_DATA7,
+ /* USBH2 */
+ USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+ PA0_PF_USBH2_CLK,
+ PA1_PF_USBH2_DIR,
+ PA2_PF_USBH2_DATA7,
+ PA3_PF_USBH2_NXT,
+ PA4_PF_USBH2_STP,
+ PD19_AF_USBH2_DATA4,
+ PD20_AF_USBH2_DATA3,
+ PD21_AF_USBH2_DATA6,
+ PD22_AF_USBH2_DATA0,
+ PD23_AF_USBH2_DATA2,
+ PD24_AF_USBH2_DATA1,
+ PD26_AF_USBH2_DATA5,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_w1_master_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563"
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ .type = "lm75"
+ }
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+ .name = "at25320an",
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+ {
+ .modalias = "at25",
+ .max_speed_hz = 30000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &at25320,
+ },
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+ .chipselect = pca100_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+ gpio_set_value(GPIO_PORTC + 20, 1);
+ udelay(2);
+ gpio_set_value(GPIO_PORTC + 20, 0);
+ mxc_gpio_mode(PC20_PF_SSI1_FS);
+ msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+ mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
+ gpio_set_value(GPIO_PORTC + 20, 0);
+ mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
+ gpio_set_value(GPIO_PORTC + 22, 0);
+ mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
+ gpio_set_value(GPIO_PORTC + 28, 0);
+ udelay(10);
+ gpio_set_value(GPIO_PORTC + 28, 1);
+ mxc_gpio_mode(PC20_PF_SSI1_FS);
+ mxc_gpio_mode(PC22_PF_SSI1_TXD);
+ msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+ .ac97_reset = pca100_ac97_cold_reset,
+ .ac97_warm_reset = pca100_ac97_warm_reset,
+ .flags = IMX_SSI_USE_AC97,
+};
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "imx-mmc-detect", data);
+ if (ret)
+ printk(KERN_ERR
+ "pca100: Failed to reuest irq for sd/mmc detection\n");
+
+ return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .init = pca100_sdhc2_init,
+ .exit = pca100_sdhc2_exit,
+};
+
+static int otg_phy_init(struct platform_device *pdev)
+{
+ gpio_set_value(OTG_PHY_CS_GPIO, 0);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+ .init = otg_phy_init,
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+ gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = usbh2_phy_init,
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
+static void __init pca100_init(void)
+{
+ int ret;
+
+ /* SSI unit */
+ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+ MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+ MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+ MXC_AUDMUX_V1_PCR_RXDSEL(3));
+ mxc_audmux_v1_configure_port(3,
+ MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+ MXC_AUDMUX_V1_PCR_TFSDIR |
+ MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
+ ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+ ARRAY_SIZE(pca100_pins), "PCA100");
+ if (ret)
+ printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+ mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+ mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pca100_i2c_devices,
+ ARRAY_SIZE(pca100_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+ /* GPIO0_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+ /* GPIO1_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+ /* GPIO2_IRQ */
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ spi_register_board_info(pca100_spi_board_info,
+ ARRAY_SIZE(pca100_spi_board_info));
+ mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+ gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+ gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+ gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+ gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &otg_pdata);
+ }
+
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+ if (!otg_mode_host) {
+ gpio_set_value(OTG_PHY_CS_GPIO, 0);
+ mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ }
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+ .init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = pca100_init,
+ .timer = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c
similarity index 89%
rename from arch/arm/mach-mx2/pcm038.c
rename to arch/arm/mach-mx2/mach-pcm038.c
index 906d59b..035fbe0 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/mach-pcm038.c
@@ -36,10 +36,12 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
@@ -96,6 +98,19 @@
PC17_PF_SSI4_RXD,
PC18_PF_SSI4_TXD,
PC19_PF_SSI4_CLK,
+ /* USB host */
+ PA0_PF_USBH2_CLK,
+ PA1_PF_USBH2_DIR,
+ PA2_PF_USBH2_DATA7,
+ PA3_PF_USBH2_NXT,
+ PA4_PF_USBH2_STP,
+ PD19_AF_USBH2_DATA4,
+ PD20_AF_USBH2_DATA3,
+ PD21_AF_USBH2_DATA6,
+ PD22_AF_USBH2_DATA0,
+ PD23_AF_USBH2_DATA2,
+ PD24_AF_USBH2_DATA1,
+ PD26_AF_USBH2_DATA5,
};
/*
@@ -108,8 +123,8 @@
};
static struct resource pcm038_sram_resource = {
- .start = CS1_BASE_ADDR,
- .end = CS1_BASE_ADDR + 512 * 1024 - 1,
+ .start = MX27_CS1_BASE_ADDR,
+ .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
@@ -173,9 +188,7 @@
* setup other stuffs to access the sram. */
static void __init pcm038_init_sram(void)
{
- __raw_writel(0x0000d843, CSCR_U(1));
- __raw_writel(0x22252521, CSCR_L(1));
- __raw_writel(0x22220a00, CSCR_A(1));
+ mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
}
static struct imxi2c_platform_data pcm038_i2c_1_data = {
@@ -279,6 +292,11 @@
}
};
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -291,7 +309,7 @@
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_gpio_mode(PE16_AF_OWIRE);
- mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+ mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
@@ -311,6 +329,8 @@
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -328,9 +348,9 @@
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = pcm038_init,
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx21.c
similarity index 66%
copy from arch/arm/mach-mx2/generic.c
copy to arch/arm/mach-mx2/mm-imx21.c
index ae8f759..6413431 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/mm-imx21.c
@@ -1,5 +1,5 @@
/*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx21.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
@@ -25,8 +25,8 @@
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-/* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
/*
* this fixed mapping covers:
* - AIPI1
@@ -36,9 +36,9 @@
* - and some reserved space
*/
{
- .virtual = AIPI_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPI_BASE_ADDR),
- .length = AIPI_SIZE,
+ .virtual = MX21_AIPI_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+ .length = MX21_AIPI_SIZE,
.type = MT_DEVICE
},
/*
@@ -47,9 +47,9 @@
* - ATA
*/
{
- .virtual = SAHB1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
- .length = SAHB1_SIZE,
+ .virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+ .length = MX21_SAHB1_SIZE,
.type = MT_DEVICE
},
/*
@@ -57,11 +57,11 @@
* - EMI
*/
{
- .virtual = X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
- .length = X_MEMC_SIZE,
+ .virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+ .length = MX21_X_MEMC_SIZE,
.type = MT_DEVICE
- }
+ },
};
/*
@@ -72,26 +72,12 @@
void __init mx21_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+ mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
-void __init mx27_map_io(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX27);
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
-void __init mx27_init_irq(void)
-{
- mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+ iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
}
void __init mx21_init_irq(void)
{
- mx27_init_irq();
+ mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
}
-
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx27.c
similarity index 67%
rename from arch/arm/mach-mx2/generic.c
rename to arch/arm/mach-mx2/mm-imx27.c
index ae8f759..3366ed4 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/mm-imx27.c
@@ -1,5 +1,5 @@
/*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx27.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
@@ -26,7 +26,7 @@
#include <asm/mach/map.h>
/* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+static struct map_desc imx27_io_desc[] __initdata = {
/*
* this fixed mapping covers:
* - AIPI1
@@ -36,9 +36,9 @@
* - and some reserved space
*/
{
- .virtual = AIPI_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPI_BASE_ADDR),
- .length = AIPI_SIZE,
+ .virtual = MX27_AIPI_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+ .length = MX27_AIPI_SIZE,
.type = MT_DEVICE
},
/*
@@ -47,9 +47,9 @@
* - ATA
*/
{
- .virtual = SAHB1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
- .length = SAHB1_SIZE,
+ .virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+ .length = MX27_SAHB1_SIZE,
.type = MT_DEVICE
},
/*
@@ -57,11 +57,11 @@
* - EMI
*/
{
- .virtual = X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
- .length = X_MEMC_SIZE,
+ .virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+ .length = MX27_X_MEMC_SIZE,
.type = MT_DEVICE
- }
+ },
};
/*
@@ -69,29 +69,15 @@
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
-void __init mx21_map_io(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX21);
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
void __init mx27_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX27);
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+ mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
}
void __init mx27_init_irq(void)
{
- mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+ mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
}
-
-void __init mx21_init_irq(void)
-{
- mx27_init_irq();
-}
-
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
deleted file mode 100644
index aea3d34..0000000
--- a/arch/arm/mach-mx2/pca100.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux.h>
-#include <mach/i2c.h>
-#include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/irqs.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static int pca100_pins[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* SDHC */
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* onboard I2C */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* external I2C */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* SPI1 */
- PD25_PF_CSPI1_RDY,
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct mxc_nand_platform_data pca100_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_w1_master_device,
- &mxc_fec_device,
-};
-
-static struct imxi2c_platform_data pca100_i2c_1_data = {
- .bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
- }, {
- I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
- }
-};
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static struct spi_eeprom at25320 = {
- .name = "at25320an",
- .byte_len = 4096,
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
- {
- .modalias = "at25",
- .max_speed_hz = 30000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &at25320,
- },
-};
-
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
-
-static struct spi_imx_master pca100_spi_0_data = {
- .chipselect = pca100_spi_cs,
- .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
-};
-#endif
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
- if (ret)
- printk(KERN_ERR
- "pca100: Failed to reuest irq for sd/mmc detection\n");
-
- return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(IRQ_GPIOC(29), data);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
- .init = pca100_sdhc2_init,
- .exit = pca100_sdhc2_exit,
-};
-
-static void __init pca100_init(void)
-{
- int ret;
-
- ret = mxc_gpio_setup_multiple_pins(pca100_pins,
- ARRAY_SIZE(pca100_pins), "PCA100");
- if (ret)
- printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
- mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-
- mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, pca100_i2c_devices,
- ARRAY_SIZE(pca100_i2c_devices));
-
- mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
- /* GPIO0_IRQ */
- mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
- /* GPIO1_IRQ */
- mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
- /* GPIO2_IRQ */
- mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
- spi_register_board_info(pca100_spi_board_info,
- ARRAY_SIZE(pca100_spi_board_info));
- mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
-#endif
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init pca100_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pca100_timer = {
- .init = pca100_timer_init,
-};
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = pca100_init,
- .timer = &pca100_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 3cb7f45..4aafd5b 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -24,7 +24,7 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
@@ -190,8 +190,8 @@
static struct resource pcm970_sja1000_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0x100 - 1,
+ .start = MX27_CS4_BASE_ADDR,
+ .end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOE(19),
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 40a485c..1c0c835 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -26,12 +26,12 @@
static struct resource uart0[] = {
{
- .start = UART1_BASE_ADDR,
- .end = UART1_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART1_BASE_ADDR,
+ .end = MX2x_UART1_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART1,
- .end = MXC_INT_UART1,
+ .start = MX2x_INT_UART1,
+ .end = MX2x_INT_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -45,12 +45,12 @@
static struct resource uart1[] = {
{
- .start = UART2_BASE_ADDR,
- .end = UART2_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART2_BASE_ADDR,
+ .end = MX2x_UART2_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART2,
- .end = MXC_INT_UART2,
+ .start = MX2x_INT_UART2,
+ .end = MX2x_INT_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -64,12 +64,12 @@
static struct resource uart2[] = {
{
- .start = UART3_BASE_ADDR,
- .end = UART3_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART3_BASE_ADDR,
+ .end = MX2x_UART3_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART3,
- .end = MXC_INT_UART3,
+ .start = MX2x_INT_UART3,
+ .end = MX2x_INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
@@ -83,12 +83,12 @@
static struct resource uart3[] = {
{
- .start = UART4_BASE_ADDR,
- .end = UART4_BASE_ADDR + 0x0B5,
+ .start = MX2x_UART4_BASE_ADDR,
+ .end = MX2x_UART4_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART4,
- .end = MXC_INT_UART4,
+ .start = MX2x_INT_UART4,
+ .end = MX2x_INT_UART4,
.flags = IORESOURCE_IRQ,
},
};
@@ -103,12 +103,12 @@
#ifdef CONFIG_MACH_MX27
static struct resource uart4[] = {
{
- .start = UART5_BASE_ADDR,
- .end = UART5_BASE_ADDR + 0x0B5,
+ .start = MX27_UART5_BASE_ADDR,
+ .end = MX27_UART5_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART5,
- .end = MXC_INT_UART5,
+ .start = MX27_INT_UART5,
+ .end = MX27_INT_UART5,
.flags = IORESOURCE_IRQ,
},
};
@@ -122,12 +122,12 @@
static struct resource uart5[] = {
{
- .start = UART6_BASE_ADDR,
- .end = UART6_BASE_ADDR + 0x0B5,
+ .start = MX27_UART6_BASE_ADDR,
+ .end = MX27_UART6_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_UART6,
- .end = MXC_INT_UART6,
+ .start = MX27_INT_UART6,
+ .end = MX27_INT_UART6,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index cc28f56..54d2173 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -3,7 +3,6 @@
comment "MX25 platforms:"
config MACH_MX25_3DS
- select ARCH_MXC_IOMUX_V3
bool "Support MX25PDK (3DS) Platform"
endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index fe23836..10cebc5 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,3 @@
obj-y := mm.o devices.o
obj-$(CONFIG_ARCH_MX25) += clock.o
-obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 37e1359..1550149 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -124,6 +124,11 @@
return get_rate_per(5);
}
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+ return get_rate_per(7);
+}
+
static unsigned long get_rate_otg(struct clk *clk)
{
return 48000000; /* FIXME */
@@ -167,6 +172,8 @@
DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -182,6 +189,8 @@
DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -214,6 +223,8 @@
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
};
int __init mx25_clocks_init(void)
@@ -228,6 +239,9 @@
__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+ /* Clock source for lcdc is upll */
+ __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 9fdeea1..3f4b8a0 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -438,3 +438,65 @@
.num_resources = ARRAY_SIZE(mx25_fec_resources),
.resource = mx25_fec_resources,
};
+
+static struct resource mxc_nand_resources[] = {
+ {
+ .start = MX25_NFC_BASE_ADDR,
+ .end = MX25_NFC_BASE_ADDR + 0x1fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX25_INT_NANDFC,
+ .end = MX25_INT_NANDFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_nand_device = {
+ .name = "mxc_nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_nand_resources),
+ .resource = mxc_nand_resources,
+};
+
+static struct resource mx25_rtc_resources[] = {
+ {
+ .start = MX25_DRYICE_BASE_ADDR,
+ .end = MX25_DRYICE_BASE_ADDR + 0x40,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX25_INT_DRYICE,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mx25_rtc_device = {
+ .name = "imxdi_rtc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mx25_rtc_resources),
+ .resource = mx25_rtc_resources,
+};
+
+static struct resource mx25_fb_resources[] = {
+ {
+ .start = MX25_LCDC_BASE_ADDR,
+ .end = MX25_LCDC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX25_INT_LCDC,
+ .end = MX25_INT_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mx25_fb_device = {
+ .name = "imx-fb",
+ .id = 0,
+ .resource = mx25_fb_resources,
+ .num_resources = ARRAY_SIZE(mx25_fb_resources),
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe5420f..39560e1 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -18,3 +18,6 @@
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
+extern struct platform_device mx25_rtc_device;
+extern struct platform_device mx25_fb_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c
similarity index 68%
rename from arch/arm/mach-mx25/mx25pdk.c
rename to arch/arm/mach-mx25/mach-mx25pdk.c
index 6f06089..83d7410 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25pdk.c
@@ -35,8 +35,9 @@
#include <mach/imx-uart.h>
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
#include "devices.h"
-#include <mach/iomux.h>
+#include <mach/iomux-mx25.h>
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
@@ -54,6 +55,31 @@
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+ /* LCD */
+ MX25_PAD_LD0__LD0,
+ MX25_PAD_LD1__LD1,
+ MX25_PAD_LD2__LD2,
+ MX25_PAD_LD3__LD3,
+ MX25_PAD_LD4__LD4,
+ MX25_PAD_LD5__LD5,
+ MX25_PAD_LD6__LD6,
+ MX25_PAD_LD7__LD7,
+ MX25_PAD_LD8__LD8,
+ MX25_PAD_LD9__LD9,
+ MX25_PAD_LD10__LD10,
+ MX25_PAD_LD11__LD11,
+ MX25_PAD_LD12__LD12,
+ MX25_PAD_LD13__LD13,
+ MX25_PAD_LD14__LD14,
+ MX25_PAD_LD15__LD15,
+ MX25_PAD_GPIO_E__LD16,
+ MX25_PAD_GPIO_F__LD17,
+ MX25_PAD_HSYNC__HSYNC,
+ MX25_PAD_VSYNC__VSYNC,
+ MX25_PAD_LSCLK__LSCLK,
+ MX25_PAD_OE_ACD__OE_ACD,
+ MX25_PAD_CONTRAST__CONTRAST,
};
static struct fec_platform_data mx25_fec_pdata = {
@@ -77,6 +103,40 @@
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+ {
+ .mode = {
+ .name = "CRT-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39683,
+ .left_margin = 45,
+ .right_margin = 114,
+ .upper_margin = 33,
+ .lower_margin = 11,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ },
+ .bpp = 16,
+ .pcr = 0xFA208B80,
+ },
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+ .mode = mx25pdk_modes,
+ .num_modes = ARRAY_SIZE(mx25pdk_modes),
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+};
+
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -84,6 +144,9 @@
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
+ mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+ mxc_register_device(&mx25_rtc_device, NULL);
+ mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
@@ -102,7 +165,7 @@
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX25_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MX25_PHYS_OFFSET + 0x100,
.map_io = mx25_map_io,
.init_irq = mx25_init_irq,
.init_machine = mx25pdk_init,
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 2829441..3872af1 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -34,6 +34,7 @@
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
@@ -86,6 +87,7 @@
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
+ select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 93c7b29..5d650fd 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,18 +5,22 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
- mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG) += qong.o
-obj-$(CONFIG_MACH_PCM043) += pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+ mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c
similarity index 98%
rename from arch/arm/mach-mx3/clock.c
rename to arch/arm/mach-mx3/clock-imx31.c
index b5c39a0..80dba99 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -616,14 +616,15 @@
mx31_read_cpu_rev();
- if (mx31_revision() >= CHIP_REV_2_0) {
+ if (mx31_revision() >= MX31_CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
__raw_writel(reg, MXC_CCM_PMCR1);
}
- mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+ MX31_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index f3f41fa..9f3e943e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
@@ -502,7 +502,8 @@
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
- mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&gpt_clk,
+ MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index db82880..861afe0 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -41,7 +41,7 @@
u32 i, srev;
/* read SREV register from IIM module */
- srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+ srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa362..37a8a07 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
-#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c
similarity index 98%
rename from arch/arm/mach-mx3/iomux.c
rename to arch/arm/mach-mx3/iomux-imx31.c
index c66ccbc..a1d7fa5 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -29,7 +29,7 @@
/*
* IOMUX register (base) addresses
*/
-#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
similarity index 97%
rename from arch/arm/mach-mx3/armadillo5x0.c
rename to arch/arm/mach-mx3/mach-armadillo5x0.c
index 54aab40..3d72b0b 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -182,8 +182,8 @@
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + SZ_64M - 1,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,9 +406,9 @@
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.timer = &armadillo5x0_timer,
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
similarity index 88%
rename from arch/arm/mach-mx3/kzmarm11.c
rename to arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 6fa99ce..f085d5d 100644
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -46,13 +46,18 @@
#include "devices.h"
+#define KZM_ARM11_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX31_CS4) ?: \
+ IMX_IO_ADDRESS(x, MX31_CS5) ?: \
+ MX31_IO_ADDRESS(x))
+
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/*
* KZM-ARM11-01 has an external UART on FPGA
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = IO_ADDRESS(KZM_ARM11_16550),
+ .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.irqflags = IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@
/*
* Unmask UART interrupt
*/
- tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+ tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
tmp |= 0x2;
- __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+ __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
return platform_device_register(&serial_device);
}
@@ -128,8 +133,8 @@
static struct resource kzm_smsc9118_resources[] = {
{
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + SZ_128K - 1,
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
@@ -222,15 +227,15 @@
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
@@ -258,9 +263,9 @@
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
.init_machine = kzm_board_init,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
similarity index 95%
rename from arch/arm/mach-mx3/mx31pdk.c
rename to arch/arm/mach-mx3/mach-mx31_3ds.c
index 18715f1..b88c18a 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -211,9 +211,9 @@
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
.type = MT_DEVICE,
},
};
@@ -256,9 +256,9 @@
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
similarity index 94%
rename from arch/arm/mach-mx3/mx31ads.c
rename to arch/arm/mach-mx3/mach-mx31ads.c
index 938c549..b3d1a18 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -60,7 +60,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
@@ -68,7 +68,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
@@ -309,12 +309,8 @@
};
static struct regulator_consumer_supply ldo2_consumers[] = {
- {
- .supply = "AVDD",
- },
- {
- .supply = "HPVDD",
- },
+ { .supply = "AVDD", .dev_name = "1-001a" },
+ { .supply = "HPVDD", .dev_name = "1-001a" },
};
/* CODEC and SIM */
@@ -385,8 +381,6 @@
static int mx31_wm8350_init(struct wm8350 *wm8350)
{
- int i;
-
wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -422,10 +416,6 @@
WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
- /* Fix up for our own supplies. */
- for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
- ldo2_consumers[i].dev = wm8350->dev;
-
wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
@@ -493,14 +483,27 @@
}
#endif
+static unsigned int ssi_pins[] = {
+ MX31_PIN_SFS5__SFS5,
+ MX31_PIN_SCK5__SCK5,
+ MX31_PIN_SRXD5__SRXD5,
+ MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+ mxc_register_device(&imx_ssi_device0, NULL);
+ mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE / 2,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE / 2,
.type = MT_DEVICE
},
};
@@ -528,6 +531,7 @@
mxc_init_extuart();
mxc_init_imx_uart();
mxc_init_i2c();
+ mxc_init_audio();
}
static void __init mx31ads_timer_init(void)
@@ -545,9 +549,9 @@
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
similarity index 96%
rename from arch/arm/mach-mx3/mx31lilly.c
rename to arch/arm/mach-mx3/mach-mx31lilly.c
index 9ce029f..80847b0 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -57,8 +57,8 @@
static struct resource smsc91x_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0xffff,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
@@ -195,9 +195,9 @@
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mx31lilly_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
similarity index 95%
rename from arch/arm/mach-mx3/mx31lite.c
rename to arch/arm/mach-mx3/mach-mx31lite.c
index 789b20d..2b6d114 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -82,8 +82,8 @@
static struct resource smsc911x_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0x100,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -214,9 +214,9 @@
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
@@ -287,9 +287,9 @@
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
similarity index 93%
rename from arch/arm/mach-mx3/mx31moboard.c
rename to arch/arm/mach-mx3/mach-mx31moboard.c
index cfd605d..a7dc519 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -96,9 +96,6 @@
/* LEDs */
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
/* SPI1 */
MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
@@ -352,9 +349,7 @@
static int moboard_usbh2_hw_init(struct platform_device *pdev)
{
- int ret = gpio_request(USBH2_EN_B, "usbh2-en");
- if (ret)
- return ret;
+ int ret;
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
@@ -371,6 +366,9 @@
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+ ret = gpio_request(USBH2_EN_B, "usbh2-en");
+ if (ret)
+ return ret;
gpio_direction_output(USBH2_EN_B, 0);
return 0;
@@ -431,34 +429,6 @@
},
};
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-
static struct ipu_platform_data mx3_ipu_data = {
.irq_base = MXC_IPU_IRQ_START,
};
@@ -518,8 +488,6 @@
mxc_register_device(&mxc_uart_device4, &uart4_pdata);
- mx31moboard_init_sel_gpios();
-
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
@@ -552,6 +520,9 @@
case MX31MARXBOT:
mx31moboard_marxbot_init();
break;
+ case MX31SMARTBOT:
+ mx31moboard_smartbot_init();
+ break;
default:
printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
mx31moboard_baseboard);
@@ -569,9 +540,9 @@
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
similarity index 95%
rename from arch/arm/mach-mx3/mx35pdk.c
rename to arch/arm/mach-mx3/mach-mx35pdk.c
index 0bbc65e..bcac84d 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35pdk.c
@@ -106,9 +106,9 @@
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
similarity index 82%
rename from arch/arm/mach-mx3/pcm037.c
rename to arch/arm/mach-mx3/mach-pcm037.c
index 5be3969..11f5315 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -33,6 +33,9 @@
#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
#include <media/soc_camera.h>
@@ -51,6 +54,8 @@
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
#include "pcm037.h"
@@ -172,19 +177,7 @@
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
/* GPIO */
IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
+ /* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
@@ -197,39 +190,29 @@
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /* USB host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
- int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
- ARRAY_SIZE(usbotg_pins), "usbotg");
+static struct physmap_flash_data pcm037_flash_data = {
+ .width = 2,
+};
- if (ret < 0) {
- printk(KERN_ERR "Cannot set up OTG pins\n");
- return ret;
- }
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- return 0;
-}
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
+static struct resource pcm037_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device pcm037_flash = {
@@ -248,8 +231,8 @@
static struct resource smsc911x_resources[] = {
{
- .start = CS1_BASE_ADDR + 0x300,
- .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+ .start = MX31_CS1_BASE_ADDR + 0x300,
+ .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +264,8 @@
};
static struct resource pcm038_sram_resource = {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 512 * 1024 - 1,
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
@@ -536,8 +519,8 @@
static struct resource pcm970_sja1000_resources[] = {
{
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + 0x100 - 1,
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -561,16 +544,65 @@
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
+static struct mxc_usbh_platform_data otg_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .portsc = MXC_EHCI_MODE_ULPI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
int ret;
+ u32 tmp;
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+ | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
+ mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
+ mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
+ mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
+ mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
+
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
@@ -608,8 +640,6 @@
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
- if (!gpio_usbotg_hs_activate())
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
/* CSI */
/* Camera power: default - off */
@@ -623,6 +653,23 @@
mxc_register_device(&mx3_camera, &camera_pdata);
platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &otg_pdata);
+ }
+
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+ if (!otg_mode_host)
+ mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
}
static void __init pcm037_timer_init(void)
@@ -636,9 +683,9 @@
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
similarity index 100%
rename from arch/arm/mach-mx3/pcm037_eet.c
rename to arch/arm/mach-mx3/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
similarity index 62%
rename from arch/arm/mach-mx3/pcm043.c
rename to arch/arm/mach-mx3/mach-pcm043.c
index e3aa829..1bf1ec2 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -26,8 +26,12 @@
#include <linux/gpio.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -44,6 +48,10 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
#include "devices.h"
@@ -205,6 +213,94 @@
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
/* gpio */
MX35_PAD_ATA_CS0__GPIO2_6,
+ /* USB host */
+ MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+ MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+ /* SSI */
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS (1 * 32 + 31)
+#define AC97_GPIO_TXD (1 * 32 + 28)
+#define AC97_GPIO_RESET (1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+ struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+ int ret;
+
+ ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+ if (ret) {
+ printk("failed to get GPIO_TXFS: %d\n", ret);
+ return;
+ }
+
+ mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+ /* warm reset */
+ gpio_direction_output(AC97_GPIO_TXFS, 1);
+ udelay(2);
+ gpio_set_value(AC97_GPIO_TXFS, 0);
+
+ gpio_free(AC97_GPIO_TXFS);
+ mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+ struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+ struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+ struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+ struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+ struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+ int ret;
+
+ ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+ if (ret)
+ goto err1;
+
+ ret = gpio_request(AC97_GPIO_TXD, "SSI");
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(AC97_GPIO_RESET, "SSI");
+ if (ret)
+ goto err3;
+
+ mxc_iomux_v3_setup_pad(&txfs_gpio);
+ mxc_iomux_v3_setup_pad(&txd_gpio);
+ mxc_iomux_v3_setup_pad(&reset_gpio);
+
+ gpio_direction_output(AC97_GPIO_TXFS, 0);
+ gpio_direction_output(AC97_GPIO_TXD, 0);
+
+ /* cold reset */
+ gpio_direction_output(AC97_GPIO_RESET, 0);
+ udelay(10);
+ gpio_direction_output(AC97_GPIO_RESET, 1);
+
+ mxc_iomux_v3_setup_pad(&txd);
+ mxc_iomux_v3_setup_pad(&txfs);
+
+ gpio_free(AC97_GPIO_RESET);
+err3:
+ gpio_free(AC97_GPIO_TXD);
+err2:
+ gpio_free(AC97_GPIO_TXFS);
+err1:
+ if (ret)
+ printk("%s failed with %d\n", __func__, ret);
+ mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+ .ac97_reset = pcm043_ac97_cold_reset,
+ .ac97_warm_reset = pcm043_ac97_warm_reset,
+ .flags = IMX_SSI_USE_AC97,
};
static struct mxc_nand_platform_data pcm037_nand_board_info = {
@@ -212,6 +308,37 @@
.hw_ecc = 1,
};
+static struct mxc_usbh_platform_data otg_pdata = {
+ .portsc = MXC_EHCI_MODE_UTMI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+ .portsc = MXC_EHCI_MODE_SERIAL,
+ .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+ MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
/*
* Board specific initialization.
*/
@@ -219,10 +346,23 @@
{
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+ mxc_audmux_v2_configure_port(3,
+ MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+ MXC_AUDMUX_V2_PTCR_TFSDIR,
+ MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+ mxc_audmux_v2_configure_port(0,
+ MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+ MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+ MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
mxc_register_device(&mxc_uart_device1, &uart_pdata);
@@ -235,6 +375,20 @@
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+#if defined(CONFIG_USB_ULPI)
+ if (otg_mode_host) {
+ otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &otg_pdata);
+ }
+
+ mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+ if (!otg_mode_host)
+ mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
}
static void __init pcm043_timer_init(void)
@@ -248,9 +402,9 @@
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c
similarity index 93%
rename from arch/arm/mach-mx3/qong.c
rename to arch/arm/mach-mx3/mach-qong.c
index 044511f..e5b5b83 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -43,7 +43,7 @@
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@
};
static struct resource qong_flash_resource = {
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.flags = IORESOURCE_MEM,
};
@@ -180,8 +180,8 @@
};
static struct resource qong_nand_resource = {
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
@@ -198,9 +198,7 @@
static void __init qong_init_nand_mtd(void)
{
/* init CS */
- __raw_writel(0x00004f00, CSCR_U(3));
- __raw_writel(0x20013b31, CSCR_L(3));
- __raw_writel(0x00020800, CSCR_A(3));
+ mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
@@ -275,9 +273,9 @@
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 694611d..ccd8742 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -67,6 +67,13 @@
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
};
/* UART */
@@ -79,11 +86,11 @@
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+ PAD_CTL_ODE_CMOS)
static int mxc_mmc1_get_ro(struct device *dev)
{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
}
static int mxc_mmc1_init(struct device *dev,
@@ -94,12 +101,17 @@
gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
@@ -113,7 +125,7 @@
gpio_direction_input(gpio_wp);
ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
@@ -133,7 +145,7 @@
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
}
static struct imxmmc_platform_data mmc_pdata = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 438428e..9fbad2e 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -49,6 +49,9 @@
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static struct imxuart_platform_data uart_pdata = {
@@ -108,6 +111,33 @@
.exit = devboard_sdhc2_exit,
};
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -196,5 +226,7 @@
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+ devboard_init_sel_gpios();
+
devboard_usbh1_init();
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 1f44b9c..3958515 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -66,6 +66,9 @@
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -127,12 +130,12 @@
static void dspics_resets_init(void)
{
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
- gpio_direction_output(TRSLAT_RST_B, 1);
+ gpio_direction_output(TRSLAT_RST_B, 0);
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
- gpio_direction_output(DSPICS_RST_B, 1);
+ gpio_direction_output(DSPICS_RST_B, 0);
gpio_export(DSPICS_RST_B, false);
}
}
@@ -200,7 +203,7 @@
int ret = gpio_request(CAM_CHOICE, "cam-choice");
if (ret)
return ret;
- gpio_direction_output(CAM_CHOICE, 1);
+ gpio_direction_output(CAM_CHOICE, 0);
ret = gpio_request(BASECAM_RST_B, "basecam-reset");
if (ret)
@@ -223,6 +226,34 @@
return 0;
}
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -307,6 +338,8 @@
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
"marxbot");
+ marxbot_init_sel_gpios();
+
dspics_resets_init();
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
new file mode 100644
index 0000000..52a69fc
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include <media/soc_camera.h>
+
+#include "devices.h"
+
+static unsigned int smartbot_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+ /* CSI */
+ MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+ MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+ /* ENABLES */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+ gpio_set_value(CAM_POWER, !on);
+ return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+ gpio_set_value(CAM_RST_B, 0);
+ udelay(100);
+ gpio_set_value(CAM_RST_B, 1);
+ return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mt9t031", 0x5d),
+ },
+};
+
+static struct soc_camera_link base_iclink = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .power = smartbot_cam_power,
+ .reset = smartbot_cam_reset,
+ .board_info = &smartbot_i2c_devices[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9t031",
+};
+
+static struct platform_device smartbot_camera[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &base_iclink,
+ },
+ },
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+ &smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+ int ret = gpio_request(CAM_RST_B, "cam-reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(CAM_RST_B, 1);
+ ret = gpio_request(CAM_POWER, "cam-standby");
+ if (ret)
+ return ret;
+ gpio_direction_output(CAM_POWER, 0);
+
+ return 0;
+}
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+ if (!gpio_request(POWER_EN, "power-enable")) {
+ gpio_direction_output(POWER_EN, 0);
+ gpio_export(POWER_EN, false);
+ }
+
+ if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+ gpio_direction_output(DSPIC_RST_B, 0);
+ gpio_export(DSPIC_RST_B, false);
+ }
+
+ if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+ gpio_direction_output(TRSLAT_RST_B, 0);
+ gpio_export(TRSLAT_RST_B, false);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(void)
+{
+ printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+ mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+ "smartbot");
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ smartbot_resets_init();
+
+ smartbot_cam_init();
+ platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
new file mode 100644
index 0000000..1576d51
--- /dev/null
+++ b/arch/arm/mach-mx5/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MX5
+
+config ARCH_MX51
+ bool
+ default y
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+
+comment "MX5 platforms:"
+
+config MACH_MX51_BABBAGE
+ bool "Support MX51 BABBAGE platforms"
+ help
+ Include support for MX51 Babbage platform, also known as MX51EVK in
+ u-boot. This includes specific configurations for the board and its
+ peripherals.
+
+endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
new file mode 100644
index 0000000..bf23f86
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y := cpu.o mm.o clock-mx51.o devices.o
+
+obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
new file mode 100644
index 0000000..9939a19
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x90008000
+params_phys-y := 0x90000100
+initrd_phys-y := 0x90800000
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
new file mode 100644
index 0000000..ee67a71
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+static struct platform_device *devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct pad_desc mx51babbage_pads[] = {
+ /* UART1 */
+ MX51_PAD_UART1_RXD__UART1_RXD,
+ MX51_PAD_UART1_TXD__UART1_TXD,
+ MX51_PAD_UART1_RTS__UART1_RTS,
+ MX51_PAD_UART1_CTS__UART1_CTS,
+
+ /* UART2 */
+ MX51_PAD_UART2_RXD__UART2_RXD,
+ MX51_PAD_UART2_TXD__UART2_TXD,
+
+ /* UART3 */
+ MX51_PAD_EIM_D25__UART3_RXD,
+ MX51_PAD_EIM_D26__UART3_TXD,
+ MX51_PAD_EIM_D27__UART3_RTS,
+ MX51_PAD_EIM_D24__UART3_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+ ARRAY_SIZE(mx51babbage_pads));
+ mxc_init_imx_uart();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx51_babbage_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+ .init = mx51_babbage_timer_init,
+};
+
+MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
+ /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
+ .phys_io = MX51_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx51_map_io,
+ .init_irq = mx51_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
new file mode 100644
index 0000000..be90c03
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -0,0 +1,825 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+
+#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+ u32 reg;
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+ reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+ struct clk *m1, struct clk *m2, struct clk *m3)
+{
+ if (parent == m0)
+ return 0;
+ else if (parent == m1)
+ return 1;
+ else if (parent == m2)
+ return 2;
+ else if (parent == m3)
+ return 3;
+ else
+ BUG();
+
+ return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+ if (pll == &pll1_main_clk)
+ return MX51_DPLL1_BASE;
+ else if (pll == &pll2_sw_clk)
+ return MX51_DPLL2_BASE;
+ else if (pll == &pll3_sw_clk)
+ return MX51_DPLL3_BASE;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+ void __iomem *pllbase;
+ s64 temp;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pllbase = _get_pll_base(clk);
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ /* Sign extend to 32-bits */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xFC000000;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk = 2 * parent_rate;
+ if (dbl != 0)
+ ref_clk *= 2;
+
+ ref_clk /= (pdf + 1);
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ void __iomem *pllbase;
+
+ long mfi, pdf, mfn, mfd = 999999;
+ s64 temp64;
+ unsigned long quad_parent_rate;
+ unsigned long pll_hfsm, dp_ctl;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pllbase = _get_pll_base(clk);
+
+ quad_parent_rate = 4 * parent_rate;
+ pdf = mfi = -1;
+ while (++pdf < 16 && mfi < 5)
+ mfi = rate * (pdf+1) / quad_parent_rate;
+ if (mfi > 15)
+ return -EINVAL;
+ pdf--;
+
+ temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate/1000000);
+ mfn = (long)temp64;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ /* use dpdck0_2 */
+ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+ } else {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+ u32 reg;
+ void __iomem *pllbase;
+ int i = 0;
+
+ pllbase = _get_pll_base(clk);
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_LRF)
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: pll locking failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+ u32 reg;
+ void __iomem *pllbase;
+
+ pllbase = _get_pll_base(clk);
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, step;
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ /* When switching from pll_main_clk to a bypass clock, first select a
+ * multiplexed clock in 'step_sel', then shift the glitchless mux
+ * 'pll1_sw_clk_sel'.
+ *
+ * When switching back, do it in reverse order
+ */
+ if (parent == &pll1_main_clk) {
+ /* Switch to pll1_main_clk */
+ reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+ __raw_writel(reg, MXC_CCM_CCSR);
+ /* step_clk mux switched to lp_apm, to save power. */
+ reg = __raw_readl(MXC_CCM_CCSR);
+ reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+ reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+ MXC_CCM_CCSR_STEP_SEL_OFFSET);
+ } else {
+ if (parent == &lp_apm_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+ } else if (parent == &pll2_sw_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+ } else if (parent == &pll3_sw_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+ } else
+ return -EINVAL;
+
+ reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+ reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+ /* Switch to step_clk */
+ reg = __raw_readl(MXC_CCM_CCSR);
+ reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+ }
+ __raw_writel(reg, MXC_CCM_CCSR);
+ return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ if (clk->parent == &pll2_sw_clk) {
+ div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+ MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+ } else if (clk->parent == &pll3_sw_clk) {
+ div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+ MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+ } else
+ div = 1;
+ return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ if (parent == &pll2_sw_clk)
+ reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+ else
+ reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+ return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ if (parent == &osc_clk)
+ reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+
+ return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+ u32 cacrr, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ cacrr = __raw_readl(MXC_CCM_CACRR);
+ div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+ return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+ int i = 0;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+ reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCMR);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(MXC_CCM_CDHIPR);
+ if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: Set parent for periph_apm clock failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+
+ if (parent == &pll2_sw_clk)
+ reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+ else if (parent == &periph_apm_clk)
+ reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ return 0;
+}
+
+static struct clk main_bus_clk = {
+ .parent = &pll2_sw_clk,
+ .set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+ MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+ return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+ int i = 0;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+ reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(MXC_CCM_CDHIPR);
+ if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: clk_ahb_set_rate failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8)
+ div = 8;
+ else if (div == 0)
+ div++;
+ return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+
+ /* Handshake with MAX when LPM is entered. */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable_inwait(clk);
+
+ /* No Handshake with MAX when LPM is entered as its disabled. */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+ MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+ return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+ u32 reg, prediv1, prediv2, podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+ /* the main_bus_clk is the one before the DVFS engine */
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+ prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+ podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+ return parent_rate / (prediv1 * prediv2 * podf);
+ } else if (clk->parent == &ipg_clk)
+ return parent_rate;
+ else
+ BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CBCMR);
+
+ reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+ reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+ if (parent == &ipg_clk)
+ reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+ else if (parent == &lp_apm_clk)
+ reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+ else if (parent != &main_bus_clk)
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CBCMR);
+
+ return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+ u32 reg, prediv, podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CSCDR1);
+ prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+ MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+ podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+ return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+ &lp_apm_clk);
+ reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CSCMR1);
+
+ return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+ return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+ return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+ .get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+ .get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+ .parent = &osc_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ * CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ * | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+ .parent = &pll1_main_clk,
+ .set_parent = _clk_pll1_sw_set_parent,
+ .get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+ .parent = &osc_clk,
+ .get_rate = clk_pll_get_rate,
+ .set_rate = _clk_pll_set_rate,
+ .set_parent = _clk_pll2_sw_set_parent,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+ .parent = &osc_clk,
+ .set_rate = _clk_pll_set_rate,
+ .get_rate = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+ .parent = &osc_clk,
+ .set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+ .parent = &pll1_sw_clk,
+ .set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+ .parent = &pll1_sw_clk,
+ .get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+ .parent = &main_bus_clk,
+ .get_rate = clk_ahb_get_rate,
+ .set_rate = _clk_ahb_set_rate,
+ .round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+ .parent = &ahb_clk,
+ .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+ .parent = &lp_apm_clk,
+ .get_rate = clk_ipg_per_get_rate,
+ .set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+ .parent = &pll2_sw_clk,
+ .get_rate = clk_uart_get_rate,
+ .set_parent = _clk_uart_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+ .parent = &ahb_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+ .enable = _clk_max_enable,
+ .disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+ .id = 0,
+ .parent = &ckil_clk,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = _clk_ccgr_enable, \
+ .disable = _clk_ccgr_disable, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+ get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_perclk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+};
+
+static void clk_tree_init(void)
+{
+ u32 reg;
+
+ ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+ /*
+ * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+ * 8MHz, its derived from lp_apm.
+ *
+ * FIXME: Verify if true for all boards
+ */
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+ reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+ __raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2)
+{
+ int i;
+
+ external_low_reference = ckil;
+ external_high_reference = ckih1;
+ ckih2_reference = ckih2;
+ oscillator_reference = osc;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ clk_tree_init();
+
+ clk_enable(&cpu_clk);
+ clk_enable(&main_bus_clk);
+
+ /* System timer */
+ mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+ MX51_MXC_INT_GPT);
+ return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
new file mode 100644
index 0000000..41c769f
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+static int __init post_cpu_init(void)
+{
+ unsigned int reg;
+ void __iomem *base;
+
+ if (!cpu_is_mx51())
+ return 0;
+
+ base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+
+ base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+
+ return 0;
+}
+
+postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
new file mode 100644
index 0000000..c776b9a
--- /dev/null
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_MFNMINUS 0x14
+#define MXC_PLL_DP_MFNPLUS 0x18
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+#define MXC_PLL_DP_MFN_TOGC 0x28
+#define MXC_PLL_DP_DESTAT 0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_CONFIG_BIST 0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
+#define MXC_PLL_DP_CONFIG_AREN 0x2
+#define MXC_PLL_DP_CONFIG_LDREQ 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0x0
+#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN (1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
+#define MXC_CCM_CCR_FPM_EN (1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET (0)
+#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY (1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
+#define MXC_CCM_CSR_FPM_READY (1 << 1)
+#define MXC_CCM_CSR_REF_EN_B (1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
+ 1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
+#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET (0)
+#define MXC_CCM_CLPCR_LPM_MASK (0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1 (0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK 0x3
+#define MXC_CCM_CCGRx_MOD_OFF 0x0
+#define MXC_CCM_CCGRx_MOD_ON 0x3
+#define MXC_CCM_CCGRx_MOD_IDLE 0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET 30
+#define MXC_CCM_CCGRx_CG14_OFFSET 28
+#define MXC_CCM_CCGRx_CG13_OFFSET 26
+#define MXC_CCM_CCGRx_CG12_OFFSET 24
+#define MXC_CCM_CCGRx_CG11_OFFSET 22
+#define MXC_CCM_CCGRx_CG10_OFFSET 20
+#define MXC_CCM_CCGRx_CG9_OFFSET 18
+#define MXC_CCM_CCGRx_CG8_OFFSET 16
+#define MXC_CCM_CCGRx_CG7_OFFSET 14
+#define MXC_CCM_CCGRx_CG6_OFFSET 12
+#define MXC_CCM_CCGRx_CG5_OFFSET 10
+#define MXC_CCM_CCGRx_CG4_OFFSET 8
+#define MXC_CCM_CCGRx_CG3_OFFSET 6
+#define MXC_CCM_CCGRx_CG2_OFFSET 4
+#define MXC_CCM_CCGRx_CG1_OFFSET 2
+#define MXC_CCM_CCGRx_CG0_OFFSET 0
+
+#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET 8
+#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR 1
+#define MXC_SRPGCR_PCR 1
+#define MXC_EMPGCR_PCR 1
+#define MXC_PGSR_PSR 1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
new file mode 100644
index 0000000..d6fd396
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+ {
+ .start = MX51_UART1_BASE_ADDR,
+ .end = MX51_UART1_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_UART1,
+ .end = MX51_MXC_INT_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device0 = {
+ .name = "imx-uart",
+ .id = 0,
+ .resource = uart0,
+ .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+ {
+ .start = MX51_UART2_BASE_ADDR,
+ .end = MX51_UART2_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_UART2,
+ .end = MX51_MXC_INT_UART2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device1 = {
+ .name = "imx-uart",
+ .id = 1,
+ .resource = uart1,
+ .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+ {
+ .start = MX51_UART3_BASE_ADDR,
+ .end = MX51_UART3_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_UART3,
+ .end = MX51_MXC_INT_UART3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_uart_device2 = {
+ .name = "imx-uart",
+ .id = 2,
+ .resource = uart2,
+ .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource mxc_fec_resources[] = {
+ {
+ .start = MX51_MXC_FEC_BASE_ADDR,
+ .end = MX51_MXC_FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX51_MXC_INT_FEC,
+ .end = MX51_MXC_INT_FEC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fec_resources),
+ .resource = mxc_fec_resources,
+};
+
+/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
+int __init mxc_register_gpios(void)
+{
+ return 0;
+}
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
new file mode 100644
index 0000000..f339ab8
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.h
@@ -0,0 +1,4 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_fec_device;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
new file mode 100644
index 0000000..c21e18b
--- /dev/null
+++ b/arch/arm/mach-mx5/mm.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX51 memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+ {
+ .virtual = MX51_IRAM_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
+ .length = MX51_IRAM_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_DEBUG_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
+ .length = MX51_DEBUG_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_TZIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
+ .length = MX51_TZIC_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
+ .length = MX51_AIPS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
+ .length = MX51_SPBA0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
+ .length = MX51_AIPS2_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
+ .length = MX51_NFC_AXI_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx51_map_io(void)
+{
+ u32 tzic_addr;
+
+ if (mx51_revision() < MX51_CHIP_REV_2_0)
+ tzic_addr = 0x8FFFC000;
+ else
+ tzic_addr = 0xE0003000;
+ mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr);
+
+ mxc_set_cpu_type(MXC_CPU_MX51);
+ mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx51_init_irq(void)
+{
+ tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 7dbe4ca..69816ba 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -55,7 +55,7 @@
MACHINE_START(MAGX_ZN5, "Motorola Zn5")
.phys_io = MXC91231_AIPS1_BASE_ADDR,
.io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = MXC91231_PHYS_OFFSET + 0x100,
.map_io = mxc91231_map_io,
.init_irq = mxc91231_init_irq,
.timer = &zn5_timer,
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c3d513c..905719a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -57,6 +57,13 @@
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation Mini platform.
+config MACH_LINKSTATION_LS_HGL
+ bool "Buffalo Linkstation LS-HGL"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation LS-HGL platform.
+
config MACH_TS409
bool "QNAP TS-409"
help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 89772fc..eb6eabc 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index f87fa12..8dc2c76 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -488,7 +488,7 @@
.dev = {
.dma_mask = &orion5x_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&orion5x_xor0_data,
+ .platform_data = &orion5x_xor0_data,
},
};
@@ -514,7 +514,7 @@
.dev = {
.dma_mask = &orion5x_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
- .platform_data = (void *)&orion5x_xor1_data,
+ .platform_data = &orion5x_xor1_data,
},
};
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 9d4bf76..7130904 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -149,10 +149,7 @@
/*
* The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity. This feature is disabled to make this LED compatible with
- * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
- * GPIO's and have to stay in an active state. This is needed to set the blue
- * LED in a "fix on" state regardless of the SATA activity.
+ * SATA activity.
*
* The following array detail the different LED registers and the combination
* of their possible values:
@@ -171,12 +168,11 @@
#define D2NET_GPIO_RED_LED 6
#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
#define D2NET_GPIO_BLUE_LED_OFF 23
-#define D2NET_GPIO_SATA0_ACT 14
-#define D2NET_GPIO_SATA1_ACT 15
static struct gpio_led d2net_leds[] = {
{
- .name = "d2net:blue:power",
+ .name = "d2net:blue:sata",
+ .default_trigger = "default-on",
.gpio = D2NET_GPIO_BLUE_LED_OFF,
.active_low = 1,
},
@@ -201,25 +197,22 @@
static void __init d2net_gpio_leds_init(void)
{
+ int err;
+
/* Configure GPIO over MPP max number. */
orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
- if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
- return;
- if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
- goto err_free_1;
- if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
- goto err_free_1;
- if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
- goto err_free_2;
- platform_device_register(&d2net_gpio_leds);
- return;
+ /* Configure register blink_ctrl to allow SATA activity LED blinking. */
+ err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+ }
+ if (err)
+ pr_err("d2net: failed to configure blue LED blink GPIO\n");
-err_free_2:
- gpio_free(D2NET_GPIO_SATA1_ACT);
-err_free_1:
- gpio_free(D2NET_GPIO_SATA0_ACT);
- return;
+ platform_device_register(&d2net_gpio_leds);
}
/****************************************************************************
@@ -289,8 +282,8 @@
{ 11, MPP_UNUSED },
{ 12, MPP_GPIO }, /* SATA 1 power */
{ 13, MPP_UNUSED },
- { 14, MPP_GPIO }, /* SATA 0 active */
- { 15, MPP_GPIO }, /* SATA 1 active */
+ { 14, MPP_SATA_LED }, /* SATA 0 active */
+ { 15, MPP_SATA_LED }, /* SATA 1 active */
{ 16, MPP_GPIO }, /* Blue front LED blink control */
{ 17, MPP_UNUSED },
{ 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
@@ -301,6 +294,8 @@
/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
};
+#define D2NET_GPIO_INHIBIT_POWER_OFF 24
+
static void __init d2net_init(void)
{
/*
@@ -333,6 +328,8 @@
i2c_register_board_info(0, d2net_i2c_devices,
ARRAY_SIZE(d2net_i2c_devices));
+
+ orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
}
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 8f159db..421b82f 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -34,7 +34,8 @@
#define DNS323_GPIO_LED_RIGHT_AMBER 1
#define DNS323_GPIO_LED_LEFT_AMBER 2
#define DNS323_GPIO_SYSTEM_UP 3
-#define DNS323_GPIO_LED_POWER 5
+#define DNS323_GPIO_LED_POWER1 4
+#define DNS323_GPIO_LED_POWER2 5
#define DNS323_GPIO_OVERTEMP 6
#define DNS323_GPIO_RTC 7
#define DNS323_GPIO_POWER_OFF 8
@@ -237,11 +238,31 @@
* GPIO LEDs (simple - doesn't use hardware blinking support)
*/
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+static int dns323_gpio_blink_set(unsigned gpio,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ static int value = 0;
+
+ if (!*delay_on && !*delay_off)
+ *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+ if (ORION_BLINK_HALF_PERIOD == *delay_on
+ && ORION_BLINK_HALF_PERIOD == *delay_off) {
+ value = !value;
+ orion_gpio_set_blink(gpio, value);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static struct gpio_led dns323_leds[] = {
{
.name = "power:blue",
- .gpio = DNS323_GPIO_LED_POWER,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
+ .gpio = DNS323_GPIO_LED_POWER2,
+ .default_trigger = "timer",
}, {
.name = "right:amber",
.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -256,6 +277,7 @@
static struct gpio_led_platform_data dns323_led_data = {
.num_leds = ARRAY_SIZE(dns323_leds),
.leds = dns323_leds,
+ .gpio_blink_set = dns323_gpio_blink_set,
};
static struct platform_device dns323_gpio_leds = {
@@ -412,6 +434,14 @@
orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
platform_device_register(&dns323_nor_flash);
+ /* The 5181 power LED is active low and requires
+ * DNS323_GPIO_LED_POWER1 to also be low.
+ */
+ if (dns323_dev_id() == MV88F5181_DEV_ID) {
+ dns323_leds[0].active_low = 1;
+ gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+ }
+
platform_device_register(&dns323_gpio_leds);
platform_device_register(&dns323_button_device);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 0000000..8e569be
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE 0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+ .width = 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = LS_HGL_NOR_BOOT_BASE,
+ .end = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ls_hgl_nor_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+ .phy_addr = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+ I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM 2
+#define LS_HGL_GPIO_LED_INFO 3
+#define LS_HGL_GPIO_LED_FUNC 17
+#define LS_HGL_GPIO_LED_PWR 0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+ {
+ .name = "alarm:red",
+ .gpio = LS_HGL_GPIO_LED_ALARM,
+ .active_low = 1,
+ }, {
+ .name = "info:amber",
+ .gpio = LS_HGL_GPIO_LED_INFO,
+ .active_low = 1,
+ }, {
+ .name = "func:blue:top",
+ .gpio = LS_HGL_GPIO_LED_FUNC,
+ .active_low = 1,
+ }, {
+ .name = "power:blue:bottom",
+ .gpio = LS_HGL_GPIO_LED_PWR,
+ },
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+ .leds = ls_hgl_led_pins,
+ .num_leds = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ls_hgl_led_data,
+ },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC 15
+#define LS_HGL_GPIO_KEY_POWER 8
+#define LS_HGL_GPIO_KEY_AUTOPOWER 10
+
+#define LS_HGL_SW_POWER 0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+ {
+ .code = KEY_OPTION,
+ .gpio = LS_HGL_GPIO_KEY_FUNC,
+ .desc = "Function Button",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LS_HGL_SW_POWER,
+ .gpio = LS_HGL_GPIO_KEY_POWER,
+ .desc = "Power-on Switch",
+ .active_low = 1,
+ }, {
+ .type = EV_SW,
+ .code = LS_HGL_SW_AUTOPOWER,
+ .gpio = LS_HGL_GPIO_KEY_AUTOPOWER,
+ .desc = "Power-auto Switch",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+ .buttons = ls_hgl_buttons,
+ .nbuttons = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ls_hgl_button_data,
+ },
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+ .n_ports = 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ * to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+ arm_machine_restart('h', NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER 9
+#define LS_HGL_GPIO_AUTO_POWER 10
+#define LS_HGL_GPIO_POWER 8
+
+#define LS_HGL_GPIO_HDD_POWER 1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* LED_PWR */
+ { 1, MPP_GPIO }, /* HDD_PWR */
+ { 2, MPP_GPIO }, /* LED_ALARM */
+ { 3, MPP_GPIO }, /* LED_INFO */
+ { 4, MPP_UNUSED },
+ { 5, MPP_UNUSED },
+ { 6, MPP_GPIO }, /* FAN_LCK */
+ { 7, MPP_GPIO }, /* INIT */
+ { 8, MPP_GPIO }, /* POWER */
+ { 9, MPP_GPIO }, /* USB_PWR */
+ { 10, MPP_GPIO }, /* AUTO_POWER */
+ { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+ { 12, MPP_UNUSED },
+ { 13, MPP_UNUSED },
+ { 14, MPP_UNUSED },
+ { 15, MPP_GPIO }, /* FUNC */
+ { 16, MPP_UNUSED },
+ { 17, MPP_GPIO }, /* LED_FUNC */
+ { 18, MPP_UNUSED },
+ { 19, MPP_UNUSED },
+ { -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+ /*
+ * Configure peripherals.
+ */
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ orion5x_eth_init(&ls_hgl_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&ls_hgl_sata_data);
+ orion5x_uart0_init();
+ orion5x_xor_init();
+
+ orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+ LS_HGL_NOR_BOOT_SIZE);
+ platform_device_register(&ls_hgl_nor_flash);
+
+ platform_device_register(&ls_hgl_button_device);
+
+ platform_device_register(&ls_hgl_leds);
+
+ i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+ /* enable USB power */
+ gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+ /* register power-off method */
+ pm_power_off = ls_hgl_power_off;
+
+ pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+ /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+ .phys_io = ORION5X_REGS_PHYS_BASE,
+ .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+ .boot_params = 0x00000100,
+ .init_machine = ls_hgl_init,
+ .map_io = orion5x_map_io,
+ .init_irq = orion5x_init_irq,
+ .timer = &orion5x_timer,
+ .fixup = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c9bf6b8..c704f05 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/leds.h>
@@ -19,12 +18,13 @@
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
#include <linux/gpio.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
-#include "include/mach/system.h"
/*****************************************************************************
* Linkstation Mini Info
@@ -186,7 +186,7 @@
static void lsmini_power_off(void)
{
- arch_reset(0, NULL);
+ arm_machine_restart('h', NULL);
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dee9218..38fbd0a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -115,6 +115,11 @@
select CPU_PXA310
select HAVE_PWM
+config MACH_CAPC7117
+ bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+ select CPU_PXA320
+ select PXA3xx
+
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
select PXA25x
@@ -417,6 +422,24 @@
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
+config MACH_RAUMFELD_RC
+ bool "Raumfeld Controller"
+ select PXA3xx
+ select CPU_PXA300
+ select HAVE_PWM
+
+config MACH_RAUMFELD_CONNECTOR
+ bool "Raumfeld Connector"
+ select PXA3xx
+ select CPU_PXA300
+ select PXA_SSP
+
+config MACH_RAUMFELD_SPEAKER
+ bool "Raumfeld Speaker"
+ select PXA3xx
+ select CPU_PXA300
+ select PXA_SSP
+
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_SCOOP
@@ -435,6 +458,7 @@
config CORGI_SSP_DEPRECATED
bool
select PXA_SSP
+ select PXA_SSP_LEGACY
help
This option will include corgi_ssp.c and corgi_lcd.c
that corgi_ts.c and other legacy drivers (corgi_bl.c
@@ -446,6 +470,7 @@
select PXA25x
select SHARP_LOCOMO
select PXA_SSP
+ select PXA_HAVE_BOARD_IRQS
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -492,6 +517,11 @@
select PXA25x
select PXA_HAVE_BOARD_IRQS
+config MACH_ICONTROL
+ bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+ select CPU_PXA320
+ select PXA3xx
+
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
@@ -629,6 +659,11 @@
help
Enable support for PXA2xx SSP ports
+config PXA_SSP_LEGACY
+ bool
+ help
+ Support of legacy SSP API
+
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f64afda..86bc87b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -48,6 +48,7 @@
endif
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
@@ -82,6 +83,7 @@
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
+obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E350) += e350.o
@@ -89,6 +91,9 @@
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
+obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
# Support for blinky lights
led-y := leds.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index b8cd07c..f3b5ace 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -132,6 +132,14 @@
"enabled\n", __func__, BALLOON3_AUX_NIRQ);
}
+static unsigned long balloon3_ac97_pin_config[] = {
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+};
+
static void balloon3_backlight_power(int on)
{
pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
@@ -140,26 +148,7 @@
static unsigned long balloon3_lcd_pin_config[] = {
/* LCD - 16bpp Active TFT */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
GPIO99_GPIO, /* Backlight */
};
@@ -311,8 +300,10 @@
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
- if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+ if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
pxa_set_ac97_info(NULL);
+ }
if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 0000000..aae5446
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ * rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+ [0] = {
+ .start = 0x11000020,
+ .end = 0x1100003f,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = 0x1100001c,
+ .end = 0x1100001c,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+ }
+};
+
+static struct platform_device capc7117_ide_device = {
+ .name = "pata_platform",
+ .num_resources = ARRAY_SIZE(capc7117_ide_resources),
+ .resource = capc7117_ide_resources,
+ .dev = {
+ .platform_data = &pata_platform_data,
+ .coherent_dma_mask = ~0 /* grumble */
+ }
+};
+
+static void __init capc7117_ide_init(void)
+{
+ platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define TI16C752_FLAGS (UPF_BOOT_AUTOCONF | \
+ UPF_IOREMAP | \
+ UPF_BUGGY_UART | \
+ UPF_SKIP_TEST)
+#define TI16C752_UARTCLK (22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+ [0] = {
+ .mapbase = 0x14000000,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [1] = {
+ .mapbase = 0x14000040,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [2] = {
+ .mapbase = 0x14000080,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [3] = {
+ .mapbase = 0x140000c0,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [4] = {
+ /* end of array */
+ }
+};
+
+static struct platform_device ti16c752_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ti16c752_platform_data
+ }
+};
+
+static void __init capc7117_uarts_init(void)
+{
+ platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+ /* Init CoM */
+ mxm_8x10_barebones_init();
+
+ /* Init evaluation board peripherals */
+ mxm_8x10_ac97_init();
+ mxm_8x10_usb_host_init();
+ mxm_8x10_mmc_init();
+
+ capc7117_uarts_init();
+ capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+ "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = capc7117_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 253fd76..f1a7703 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -50,26 +50,7 @@
GPIO47_STUART_TXD,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* SSP1 */
GPIO23_SSP1_SCLK,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index eea78b6..a9926bb 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -71,26 +71,7 @@
GPIO111_MMC_DAT_3,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* I2C */
GPIO117_I2C_SCL,
@@ -195,33 +176,57 @@
},
};
-static unsigned long save_lcd_regs[10];
+static unsigned long cmx270_marathon_on[] = {
+ GPIO58_GPIO,
+ GPIO59_GPIO,
+ GPIO60_GPIO,
+ GPIO61_GPIO,
+ GPIO62_GPIO,
+ GPIO63_GPIO,
+ GPIO64_GPIO,
+ GPIO65_GPIO,
+ GPIO66_GPIO,
+ GPIO67_GPIO,
+ GPIO68_GPIO,
+ GPIO69_GPIO,
+ GPIO70_GPIO,
+ GPIO71_GPIO,
+ GPIO72_GPIO,
+ GPIO73_GPIO,
+ GPIO74_GPIO,
+ GPIO75_GPIO,
+ GPIO76_GPIO,
+ GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+ GPIOxx_LCD_TFT_16BPP,
+};
static int cmx270_marathon_probe(struct fb_info *fb)
{
- /* save PXA-270 pin settings before enabling 2700G */
- save_lcd_regs[0] = GPDR1;
- save_lcd_regs[1] = GPDR2;
- save_lcd_regs[2] = GAFR1_U;
- save_lcd_regs[3] = GAFR2_L;
- save_lcd_regs[4] = GAFR2_U;
+ int gpio, err;
- /* Disable PXA-270 on-chip controller driving pins */
- GPDR1 &= ~(0xfc000000);
- GPDR2 &= ~(0x00c03fff);
- GAFR1_U &= ~(0xfff00000);
- GAFR2_L &= ~(0x0fffffff);
- GAFR2_U &= ~(0x0000f000);
+ for (gpio = 58; gpio <= 77; gpio++) {
+ err = gpio_request(gpio, "LCD");
+ if (err)
+ return err;
+ gpio_direction_input(gpio);
+ }
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
return 0;
}
static int cmx270_marathon_remove(struct fb_info *fb)
{
- GPDR1 = save_lcd_regs[0];
- GPDR2 = save_lcd_regs[1];
- GAFR1_U = save_lcd_regs[2];
- GAFR2_L = save_lcd_regs[3];
- GAFR2_U = save_lcd_regs[4];
+ int gpio;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+ for (gpio = 58; gpio <= 77; gpio++)
+ gpio_free(gpio);
+
return 0;
}
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 7873fa3..161fc2d 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -59,7 +59,7 @@
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
- GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+ desc->chip->ack(irq);
it8152_irq_demux(irq, desc);
}
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 94b23a9..d578021 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -134,6 +134,12 @@
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
/* Audio power control */
GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
GPIO40_GPIO, /* Mic amp power */
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 5eccbce..af83caa 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -132,6 +132,12 @@
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
/* Audio power control */
GPIO4_GPIO, /* Headphone amp power */
GPIO7_GPIO, /* Speaker amp power */
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index aad129b..8ea97bf 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -35,6 +35,14 @@
/* ------------------------ e800 LCD definitions ------------------------- */
+static unsigned long e800_pin_config[] __initdata = {
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+};
+
static struct w100_gen_regs e800_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x02a00000,
@@ -195,6 +203,7 @@
static void __init e800_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index c8a01bc..aab04f3 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -109,26 +109,7 @@
GPIO111_MMC_DAT_3,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* QCI */
GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 0000000..771137f
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include <linux/spi/spi.h>
+#include <mach/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1 (15)
+#define ICONTROL_MCP251x_nCS2 (16)
+#define ICONTROL_MCP251x_nCS3 (17)
+#define ICONTROL_MCP251x_nCS4 (24)
+
+#define ICONTROL_MCP251x_nIRQ1 (74)
+#define ICONTROL_MCP251x_nIRQ2 (75)
+#define ICONTROL_MCP251x_nIRQ3 (76)
+#define ICONTROL_MCP251x_nIRQ4 (77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+ .tx_threshold = 8,
+ .rx_threshold = 128,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+ .oscillator_frequency = 16E6,
+ .model = CAN_MCP251X_MCP2515,
+ .board_specific_setup = NULL,
+ .power_enable = NULL,
+ .transceiver_enable = NULL
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+ {
+ .modalias = "mcp251x",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info1,
+ .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+ },
+ {
+ .modalias = "mcp251x",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 1,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info2,
+ .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+ },
+ {
+ .modalias = "mcp251x",
+ .max_speed_hz = 6500000,
+ .bus_num = 4,
+ .chip_select = 0,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info3,
+ .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+ },
+ {
+ .modalias = "mcp251x",
+ .max_speed_hz = 6500000,
+ .bus_num = 4,
+ .chip_select = 1,
+ .platform_data = &mcp251x_info,
+ .controller_data = &mcp251x_chip_info4,
+ .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+ }
+};
+
+static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+ .clock_enable = CKEN_SSP3,
+ .num_chipselect = 2,
+ .enable_dma = 1
+};
+
+static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+ .clock_enable = CKEN_SSP4,
+ .num_chipselect = 2,
+ .enable_dma = 1
+};
+
+struct platform_device pxa_spi_ssp3 = {
+ .name = "pxa2xx-spi",
+ .id = 3,
+ .dev = {
+ .platform_data = &pxa_ssp3_spi_master_info,
+ }
+};
+
+struct platform_device pxa_spi_ssp4 = {
+ .name = "pxa2xx-spi",
+ .id = 4,
+ .dev = {
+ .platform_data = &pxa_ssp4_spi_master_info,
+ }
+};
+
+static struct platform_device *icontrol_spi_devices[] __initdata = {
+ &pxa_spi_ssp3,
+ &pxa_spi_ssp4,
+};
+
+static mfp_cfg_t mfp_can_cfg[] __initdata = {
+ /* CAN CS lines */
+ GPIO15_GPIO,
+ GPIO16_GPIO,
+ GPIO17_GPIO,
+ GPIO24_GPIO,
+
+ /* SPI (SSP3) lines */
+ GPIO89_SSP3_SCLK,
+ GPIO91_SSP3_TXD,
+ GPIO92_SSP3_RXD,
+
+ /* SPI (SSP4) lines */
+ GPIO93_SSP4_SCLK,
+ GPIO95_SSP4_TXD,
+ GPIO96_SSP4_RXD,
+
+ /* CAN nIRQ lines */
+ GPIO74_GPIO | MFP_LPM_EDGE_RISE,
+ GPIO75_GPIO | MFP_LPM_EDGE_RISE,
+ GPIO76_GPIO | MFP_LPM_EDGE_RISE,
+ GPIO77_GPIO | MFP_LPM_EDGE_RISE
+};
+
+static void __init icontrol_can_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+ platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
+ spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
+}
+
+static void __init icontrol_init(void)
+{
+ mxm_8x10_barebones_init();
+ mxm_8x10_usb_host_init();
+ mxm_8x10_mmc_init();
+
+ icontrol_can_init();
+}
+
+MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = icontrol_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5c9e11d..bc78c4d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -47,25 +47,7 @@
static unsigned long idp_pin_config[] __initdata = {
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
+ GPIOxx_LCD_DSTN_16BPP,
/* BTUART */
GPIO42_BTUART_RXD,
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 5b0862d..b2f878b 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -64,7 +64,6 @@
GPIO116_GPIO, /* CC_CCA */
GPIO0_GPIO, /* CC_FIFOP */
GPIO16_GPIO, /* CCSFD */
- GPIO39_GPIO, /* CSn */
GPIO115_GPIO, /* Power enable */
/* I2C */
@@ -72,7 +71,7 @@
GPIO118_I2C_SDA,
/* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* Chip Select */
+ GPIO39_GPIO, /* Chip Select */
GPIO34_SSP3_SCLK,
GPIO35_SSP3_TXD,
GPIO41_SSP3_RXD,
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index bfec09b..1a74106 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -129,6 +129,16 @@
#define CPLD_AROUTING_LOONR2INT_BIT 6
#define CPLD_AROUTING_LOONR2EXT_BIT 7
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
extern int balloon3_has(enum balloon3_features feature);
#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 3677a9a..ffc8314 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -135,82 +135,6 @@
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
#endif
-#define IRQ_SA1111_START (IRQ_BOARD_END)
-#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
-#define SSPXMTINT (IRQ_BOARD_END + 24)
-#define SSPRCVINT (IRQ_BOARD_END + 25)
-#define SSPROR (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
-#define AUDTFSR (IRQ_BOARD_END + 36)
-#define AUDRFSR (IRQ_BOARD_END + 37)
-#define AUDTUR (IRQ_BOARD_END + 38)
-#define AUDROR (IRQ_BOARD_END + 39)
-#define AUDDTS (IRQ_BOARD_END + 40)
-#define AUDRDD (IRQ_BOARD_END + 41)
-#define AUDSTO (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR (IRQ_BOARD_END + 43)
-#define IRQ_HCIM (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
-
/*
* Figure out the MAX IRQ number.
*
@@ -219,89 +143,16 @@
* Otherwise, we have the standard IRQs only.
*/
#ifdef CONFIG_SA1111
-#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS (IRQ_BOARD_END + 55)
#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
#define NR_IRQS (IRQ_BOARD_END)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
-/*
- * Board specific IRQs. Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
-#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
-#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
-#define LPD270_AC97_IRQ LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
-
-#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
-
-#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
-
-/* ITE8152 irqs */
/* add IT8152 IRQs beyond BOARD_END */
#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT 9
-#define IT8152_LP_IRQ_COUNT 16
-#define IT8152_PD_IRQ_COUNT 15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+#define IT8152_LAST_IRQ (IRQ_BOARD_END + 40)
#if NR_IRQS < (IT8152_LAST_IRQ+1)
#undef NR_IRQS
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index f89fb71..0e6440c 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -34,5 +34,9 @@
#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */
+#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
+#define LPD270_AC97_IRQ LPD270_IRQ(4)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 751b748..a0d4247 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -34,6 +34,17 @@
#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+/* Board specific IRQs */
+#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
+#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
+#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
+
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 3461c43..86e623a 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -117,4 +117,21 @@
#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
+/* board specific IRQs */
+#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
+
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 9c78785..cafadc3 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -190,4 +190,36 @@
#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
#endif /* CONFIG_CPU_PXA26x */
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP \
+ GPIO58_LCD_LDD_0, \
+ GPIO59_LCD_LDD_1, \
+ GPIO60_LCD_LDD_2, \
+ GPIO61_LCD_LDD_3, \
+ GPIO62_LCD_LDD_4, \
+ GPIO63_LCD_LDD_5, \
+ GPIO64_LCD_LDD_6, \
+ GPIO65_LCD_LDD_7, \
+ GPIO66_LCD_LDD_8, \
+ GPIO67_LCD_LDD_9, \
+ GPIO68_LCD_LDD_10, \
+ GPIO69_LCD_LDD_11, \
+ GPIO70_LCD_LDD_12, \
+ GPIO71_LCD_LDD_13, \
+ GPIO72_LCD_LDD_14, \
+ GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_DSTN_16BPP \
+ GPIOxx_LCD_16BPP, \
+ GPIO74_LCD_FCLK, \
+ GPIO75_LCD_LCLK, \
+ GPIO76_LCD_PCLK
+
+#define GPIOxx_LCD_TFT_16BPP \
+ GPIOxx_LCD_16BPP, \
+ GPIO74_LCD_FCLK, \
+ GPIO75_LCD_LCLK, \
+ GPIO76_LCD_PCLK, \
+ GPIO77_LCD_BIAS
+
#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 6543c05..ec0f0b0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -434,5 +434,32 @@
#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP \
+ GPIO58_LCD_LDD_0, \
+ GPIO59_LCD_LDD_1, \
+ GPIO60_LCD_LDD_2, \
+ GPIO61_LCD_LDD_3, \
+ GPIO62_LCD_LDD_4, \
+ GPIO63_LCD_LDD_5, \
+ GPIO64_LCD_LDD_6, \
+ GPIO65_LCD_LDD_7, \
+ GPIO66_LCD_LDD_8, \
+ GPIO67_LCD_LDD_9, \
+ GPIO68_LCD_LDD_10, \
+ GPIO69_LCD_LDD_11, \
+ GPIO70_LCD_LDD_12, \
+ GPIO71_LCD_LDD_13, \
+ GPIO72_LCD_LDD_14, \
+ GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP \
+ GPIOxx_LCD_16BPP, \
+ GPIO74_LCD_FCLK, \
+ GPIO75_LCD_LCLK, \
+ GPIO76_LCD_PCLK, \
+ GPIO77_LCD_BIAS
+
+
extern int keypad_set_wake(unsigned int on);
#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/include/mach/mxm8x10.h
new file mode 100644
index 0000000..ffa1566
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mxm8x10.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS 0x13000000
+
+#if defined(CONFIG_MMC)
+
+#define MXM_8X10_SD_nCD (72)
+#define MXM_8X10_SD_WP (84)
+
+extern void mxm_8x10_mmc_init(void);
+#else
+static inline void mxm_8x10_mmc_init(void) {}
+#endif
+
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4dcd2e8..0408326 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,13 @@
* Definitions of CPU card resources only
*/
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
+
/* I2C RTC */
#define PCM027_RTC_IRQ_GPIO 0
#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index cb5cb76..be1be5b 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -46,6 +46,7 @@
int drcmr_tx;
};
+#ifdef CONFIG_PXA_SSP_LEGACY
/*
* SSP initialisation flags
*/
@@ -78,6 +79,7 @@
int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
void ssp_exit(struct ssp_dev *dev);
+#endif /* CONFIG_PXA_SSP_LEGACY */
/**
* ssp_write_reg - Write to a SSP register
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 237734b..5ef91d9 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,20 +10,41 @@
*/
#include <linux/serial_reg.h>
-#include <mach/regs-uart.h>
#include <asm/mach-types.h>
-#define __REG(x) ((volatile unsigned long *)x)
+#define FFUART_BASE (0x40100000)
+#define BTUART_BASE (0x40200000)
+#define STUART_BASE (0x40700000)
-static volatile unsigned long *UART = FFUART;
+static unsigned long uart_base = FFUART_BASE;
+static unsigned int uart_shift = 2;
+static unsigned int uart_is_pxa = 1;
+
+static inline unsigned char uart_read(int offset)
+{
+ return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
+}
+
+static inline void uart_write(unsigned char val, int offset)
+{
+ *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
+}
+
+static inline int uart_is_enabled(void)
+{
+ /* assume enabled by default for non-PXA uarts */
+ return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
+}
static inline void putc(char c)
{
- if (!(UART[UART_IER] & IER_UUE))
+ if (!uart_is_enabled())
return;
- while (!(UART[UART_LSR] & LSR_TDRQ))
+
+ while (!(uart_read(UART_LSR) & UART_LSR_THRE))
barrier();
- UART[UART_TX] = c;
+
+ uart_write(c, UART_TX);
}
/*
@@ -38,7 +59,13 @@
if (machine_is_littleton() || machine_is_intelmote2()
|| machine_is_csb726() || machine_is_stargate2()
|| machine_is_cm_x300() || machine_is_balloon3())
- UART = STUART;
+ uart_base = STUART_BASE;
+
+ if (machine_is_arcom_zeus()) {
+ uart_base = 0x10000000; /* nCS4 */
+ uart_shift = 1;
+ uart_is_pxa = 0;
+ }
}
/*
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index c387046..6e11997 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -58,6 +58,8 @@
#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x))
#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x))
+#define ZEUS_CAN_SHDN_GPIO ZEUS_EXT1_GPIO(2)
+
/*
* CPLD registers:
* Only 4 registers, but spreaded over a 32MB address space.
@@ -68,7 +70,6 @@
#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
-#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000)
/* CPLD register bits */
#define ZEUS_CPLD_CONTROL_CF_RST 0x01
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1373c22..d279507 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -83,6 +83,10 @@
GPIO89_USBH1_PEN,
/* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
GPIO45_AC97_SYSCLK,
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
@@ -121,7 +125,7 @@
pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
do {
- GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
+ desc->chip->ack(irq); /* clear useless edge notification */
if (likely(pending)) {
irq = LPD270_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 98ee7e5..63d65a2 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -66,26 +66,14 @@
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
/* LCD - 16bpp DSTN */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
+ GPIOxx_LCD_DSTN_16BPP,
/* BTUART */
GPIO42_BTUART_RXD,
@@ -158,7 +146,7 @@
{
unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
do {
- GEDR(0) = GPIO_bit(0); /* clear our parent irq */
+ desc->chip->ack(irq); /* clear our parent irq */
if (likely(pending)) {
irq = LUBBOCK_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
@@ -240,11 +228,18 @@
},
};
+static struct sa1111_platform_data sa1111_info = {
+ .irq_base = IRQ_BOARD_END,
+};
+
static struct platform_device sa1111_device = {
.name = "sa1111",
.id = -1,
.num_resources = ARRAY_SIZE(sa1111_resources),
.resource = sa1111_resources,
+ .dev = {
+ .platform_data = &sa1111_info,
+ },
};
/* ADS7846 is connected through SSP ... and if your board has J5 populated,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 189f330..e81dd0c 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -88,26 +88,7 @@
GPIO112_MMC_CMD,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* QCI */
GPIO12_CIF_DD_7,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ee0f..5543c64 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -60,26 +60,7 @@
GPIO15_nCS_1,
/* LCD - 16bpp Active TFT */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
GPIO16_PWM0_OUT, /* Backlight */
/* MMC */
@@ -107,6 +88,10 @@
GPIO57_nIOIS16,
/* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
GPIO45_AC97_SYSCLK,
/* Keypad */
@@ -162,7 +147,7 @@
{
unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
do {
- GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
+ desc->chip->ack(irq); /* clear useless edge notification */
if (likely(pending)) {
irq = MAINSTONE_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2466a44..843fcca 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -86,25 +86,7 @@
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
+ GPIOxx_LCD_TFT_16BPP,
/* QCI */
GPIO12_CIF_DD_7,
@@ -155,6 +137,10 @@
GPIO41_FFUART_RTS,
/* Sound */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
new file mode 100644
index 0000000..8c9c6f0
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ * rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa320.h>
+
+#include <mach/mxm8x10.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff - Leave unconfigured for now...
+---------------------
+GPIO0 - DREQ (External DMA Request)
+GPIO3 - nGCS2 (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4 - nGCS3
+GPIO15 - EXT_GPIO1
+GPIO16 - EXT_GPIO2
+GPIO17 - EXT_GPIO3
+GPIO24 - EXT_GPIO4
+GPIO25 - EXT_GPIO5
+GPIO26 - EXT_GPIO6
+GPIO27 - EXT_GPIO7
+GPIO28 - EXT_GPIO8
+GPIO29 - EXT_GPIO9
+GPIO30 - EXT_GPIO10
+GPIO31 - EXT_GPIO11
+GPIO57 - EXT_GPIO12
+GPIO74 - EXT_IRQ1
+GPIO75 - EXT_IRQ2
+GPIO76 - EXT_IRQ3
+GPIO77 - EXT_IRQ4
+GPIO78 - EXT_IRQ5
+GPIO79 - EXT_IRQ6
+GPIO80 - EXT_IRQ7
+GPIO81 - EXT_IRQ8
+GPIO87 - VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire - Leave unconfigured for now...
+-------------
+GPIO0_2 - DS - 1Wire
+
+Ethernet
+--------
+GPIO1 - DM9000 PWR
+GPIO9 - DM9K_nIRQ
+GPIO36 - DM9K_RESET
+
+Keypad - Leave unconfigured by for now...
+------
+GPIO1_2 - KP_DKIN0
+GPIO5_2 - KP_MKOUT7
+GPIO82 - KP_DKIN1
+GPIO85 - KP_DKIN2
+GPIO86 - KP_DKIN3
+GPIO113 - KP_MKIN0
+GPIO114 - KP_MKIN1
+GPIO115 - KP_MKIN2
+GPIO116 - KP_MKIN3
+GPIO117 - KP_MKIN4
+GPIO118 - KP_MKIN5
+GPIO119 - KP_MKIN6
+GPIO120 - KP_MKIN7
+GPIO121 - KP_MKOUT0
+GPIO122 - KP_MKOUT1
+GPIO122 - KP_MKOUT2
+GPIO123 - KP_MKOUT3
+GPIO124 - KP_MKOUT4
+GPIO125 - KP_MKOUT5
+GPIO127 - KP_MKOUT6
+
+Data Bus - Leave unconfigured for now...
+--------
+GPIO2 - nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 - USBD_PULLUP
+GPIO10 - UTM_CLK (USB Device UTM Clk)
+GPIO49 - USB 2.0 Device UTM_DATA0
+GPIO50 - USB 2.0 Device UTM_DATA1
+GPIO51 - USB 2.0 Device UTM_DATA2
+GPIO52 - USB 2.0 Device UTM_DATA3
+GPIO53 - USB 2.0 Device UTM_DATA4
+GPIO54 - USB 2.0 Device UTM_DATA5
+GPIO55 - USB 2.0 Device UTM_DATA6
+GPIO56 - USB 2.0 Device UTM_DATA7
+GPIO58 - UTM_RXVALID (USB 2.0 Device)
+GPIO59 - UTM_RXACTIVE (USB 2.0 Device)
+GPIO60 - UTM_RXERROR
+GPIO61 - UTM_OPMODE0
+GPIO62 - UTM_OPMODE1
+GPIO71 - USBD_INT (USB Device?)
+GPIO73 - UTM_TXREADY (USB 2.0 Device)
+GPIO83 - UTM_TXVALID (USB 2.0 Device)
+GPIO98 - UTM_RESET (USB 2.0 device)
+GPIO99 - UTM_XCVR_SELECT
+GPIO100 - UTM_TERM_SELECT
+GPIO101 - UTM_SUSPENDM_X
+GPIO102 - UTM_LINESTATE0
+GPIO103 - UTM_LINESTATE1
+
+Card-Bus Interface - Leave unconfigured for now...
+------------------
+GPIO5 - nPIOR (I/O space output enable)
+GPIO6 - nPIOW (I/O space write enable)
+GPIO7 - nIOS16 (Input from I/O space telling size of data bus)
+GPIO8 - nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2 - LDD0
+GPIO7_2 - LDD1
+GPIO8_2 - LDD2
+GPIO9_2 - LDD3
+GPIO11_2 - LDD5
+GPIO12_2 - LDD6
+GPIO13_2 - LDD7
+GPIO14_2 - VSYNC
+GPIO15_2 - HSYNC
+GPIO16_2 - VCLK
+GPIO17_2 - HCLK
+GPIO18_2 - VDEN
+GPIO63 - LDD8 (CPU LCD)
+GPIO64 - LDD9 (CPU LCD)
+GPIO65 - LDD10 (CPU LCD)
+GPIO66 - LDD11 (CPU LCD)
+GPIO67 - LDD12 (CPU LCD)
+GPIO68 - LDD13 (CPU LCD)
+GPIO69 - LDD14 (CPU LCD)
+GPIO70 - LDD15 (CPU LCD)
+GPIO88 - VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97 - BACKLIGHT_EN
+GPIO104 - LCD_PWREN
+
+PWM - Leave unconfigured for now...
+---
+GPIO11 - PWM0
+GPIO12 - PWM1
+GPIO13 - PWM2
+GPIO14 - PWM3
+
+SD-CARD
+-------
+GPIO18 - SDDATA0
+GPIO19 - SDDATA1
+GPIO20 - SDDATA2
+GPIO21 - SDDATA3
+GPIO22 - SDCLK
+GPIO23 - SDCMD
+GPIO72 - SD_WP
+GPIO84 - SD_nIRQ_CD (SD-Card)
+
+I2C
+---
+GPIO32 - I2CSCL
+GPIO33 - I2CSDA
+
+AC97
+----
+GPIO35 - AC97_SDATA_IN
+GPIO37 - AC97_SDATA_OUT
+GPIO38 - AC97_SYNC
+GPIO39 - AC97_BITCLK
+GPIO40 - AC97_nRESET
+
+UART1
+-----
+GPIO41 - UART_RXD1
+GPIO42 - UART_TXD1
+GPIO43 - UART_CTS1
+GPIO44 - UART_DCD1
+GPIO45 - UART_DSR1
+GPIO46 - UART_nRI1
+GPIO47 - UART_DTR1
+GPIO48 - UART_RTS1
+
+UART2
+-----
+GPIO109 - RTS2
+GPIO110 - RXD2
+GPIO111 - TXD2
+GPIO112 - nCTS2
+
+UART3
+-----
+GPIO105 - nCTS3
+GPIO106 - nRTS3
+GPIO107 - TXD3
+GPIO108 - RXD3
+
+SSP3 - Leave unconfigured for now...
+----
+GPIO89 - SSP3_CLK
+GPIO90 - SSP3_SFRM
+GPIO91 - SSP3_TXD
+GPIO92 - SSP3_RXD
+
+SSP4
+GPIO93 - SSP4_CLK
+GPIO94 - SSP4_SFRM
+GPIO95 - SSP4_TXD
+GPIO96 - SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+ /* USB */
+ GPIO10_UTM_CLK,
+ GPIO49_U2D_PHYDATA_0,
+ GPIO50_U2D_PHYDATA_1,
+ GPIO51_U2D_PHYDATA_2,
+ GPIO52_U2D_PHYDATA_3,
+ GPIO53_U2D_PHYDATA_4,
+ GPIO54_U2D_PHYDATA_5,
+ GPIO55_U2D_PHYDATA_6,
+ GPIO56_U2D_PHYDATA_7,
+ GPIO58_UTM_RXVALID,
+ GPIO59_UTM_RXACTIVE,
+ GPIO60_U2D_RXERROR,
+ GPIO61_U2D_OPMODE0,
+ GPIO62_U2D_OPMODE1,
+ GPIO71_GPIO, /* USBD_INT */
+ GPIO73_UTM_TXREADY,
+ GPIO83_U2D_TXVALID,
+ GPIO98_U2D_RESET,
+ GPIO99_U2D_XCVR_SEL,
+ GPIO100_U2D_TERM_SEL,
+ GPIO101_U2D_SUSPEND,
+ GPIO102_UTM_LINESTATE_0,
+ GPIO103_UTM_LINESTATE_1,
+ GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+ /* DM9000 */
+ GPIO1_GPIO,
+ GPIO9_GPIO,
+ GPIO36_GPIO,
+
+ /* AC97 */
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET,
+
+ /* UARTS */
+ GPIO41_UART1_RXD,
+ GPIO42_UART1_TXD,
+ GPIO43_UART1_CTS,
+ GPIO44_UART1_DCD,
+ GPIO45_UART1_DSR,
+ GPIO46_UART1_RI,
+ GPIO47_UART1_DTR,
+ GPIO48_UART1_RTS,
+
+ GPIO109_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+ GPIO112_UART2_CTS,
+
+ GPIO105_UART3_CTS,
+ GPIO106_UART3_RTS,
+ GPIO107_UART3_TXD,
+ GPIO108_UART3_RXD,
+
+ GPIO78_GPIO,
+ GPIO79_GPIO,
+ GPIO80_GPIO,
+ GPIO81_GPIO,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* MMC */
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
+ GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
+
+ /* IRQ */
+ GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+ GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+ GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+ GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+ GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+ GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+ GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+ GPIO81_GPIO | MFP_LPM_EDGE_RISE /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .detect_delay = 1,
+ .gpio_card_detect = MXM_8X10_SD_nCD,
+ .gpio_card_ro = MXM_8X10_SD_WP,
+ .gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+ pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#endif
+
+/* USB Open Host Controler Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+ pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+ .name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+ platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x) (NAND_BLOCK_SIZE * (x))
+static struct mtd_partition mxm_8x10_nand_partitions[] = {
+ [0] = {
+ .name = "boot",
+ .size = NB(0x002),
+ .offset = NB(0x000),
+ .mask_flags = MTD_WRITEABLE
+ },
+ [1] = {
+ .name = "kernel",
+ .size = NB(0x010),
+ .offset = NB(0x002),
+ .mask_flags = MTD_WRITEABLE
+ },
+ [2] = {
+ .name = "root",
+ .size = NB(0x36c),
+ .offset = NB(0x012)
+ },
+ [3] = {
+ .name = "bbt",
+ .size = NB(0x082),
+ .offset = NB(0x37e),
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .parts = mxm_8x10_nand_partitions,
+ .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+static void __init mxm_8x10_nand_init(void)
+{
+ pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+static inline void mxm_8x10_nand_init(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+ [0] = {
+ .start = MXM_8X10_ETH_PHYS + 0x300,
+ .end = MXM_8X10_ETH_PHYS + 0x300,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXM_8X10_ETH_PHYS + 0x308,
+ .end = MXM_8X10_ETH_PHYS + 0x308,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+ }
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+ .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9k_resources),
+ .resource = dm9k_resources,
+ .dev = {
+ .platform_data = &dm9k_plat_data
+ }
+};
+
+static void __init mxm_8x10_ethernet_init(void)
+{
+ platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68)
+ }
+};
+
+static void __init mxm_8x10_i2c_init(void)
+{
+ i2c_register_board_info(0, mxm_8x10_i2c_devices,
+ ARRAY_SIZE(mxm_8x10_i2c_devices));
+ pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+ mxm_8x10_uarts_init();
+ mxm_8x10_nand_init();
+ mxm_8x10_i2c_init();
+ mxm_8x10_ethernet_init();
+}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index e100af7..f70c75b 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -83,26 +83,7 @@
GPIO105_KP_MKOUT_2,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* PWM */
GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 8fe3ec2..d902a81 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -87,26 +87,7 @@
GPIO105_KP_MKOUT_2,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* PWM */
GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index b992f07..717d7a6 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -84,26 +84,7 @@
GPIO36_GPIO, /* pullup */
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* MATRIX KEYPAD */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index dc728d6..3d284ff 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -73,26 +73,7 @@
GPIO47_FICP_TXD,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* GPIO KEYS */
GPIO5_GPIO, /* notes */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index b433bb4..d8b4469 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -99,25 +99,7 @@
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
+ GPIOxx_LCD_TFT_16BPP,
/* Quick Capture Interface */
GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b37a025..007b58c 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -110,26 +110,7 @@
GPIO105_KP_MKOUT_2,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* FFUART */
GPIO34_FFUART_RXD,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1c5d68a..3a7925c 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -95,26 +95,8 @@
GPIO105_KP_MKOUT_2,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
+
GPIO20_GPIO, /* bl power */
GPIO21_GPIO, /* LCD border switch */
GPIO22_GPIO, /* LCD border color */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d5255ae..9d0ecea1 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -58,6 +58,12 @@
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
};
/*
@@ -259,8 +265,7 @@
unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
do {
- GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
- GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+ desc->chip->ack(irq); /* clear our parent IRQ */
if (likely(pending)) {
irq = PCM027_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index c2b938a..d58a524 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -91,26 +91,7 @@
GPIO35_FFUART_CTS,
/* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* PC Card */
GPIO48_nPOE,
@@ -193,11 +174,18 @@
},
};
+static struct locomo_platform_data locomo_info = {
+ .irq_base = IRQ_BOARD_START,
+};
+
struct platform_device poodle_locomo_device = {
.name = "locomo",
.id = 0,
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
+ .dev = {
+ .platform_data = &locomo_info,
+ },
};
EXPORT_SYMBOL(poodle_locomo_device);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d783123..0af3617 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -40,6 +40,25 @@
}
EXPORT_SYMBOL(pxa27x_clear_otgph);
+static unsigned long ac97_reset_config[] = {
+ GPIO95_AC97_nRESET,
+ GPIO95_GPIO,
+ GPIO113_AC97_nRESET,
+ GPIO113_GPIO,
+};
+
+void pxa27x_assert_ac97reset(int reset_gpio, int on)
+{
+ if (reset_gpio == 113)
+ pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
+ &ac97_reset_config[1], 1);
+
+ if (reset_gpio == 95)
+ pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
+ &ac97_reset_config[3], 1);
+}
+EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+
/* Crystal clock: 13MHz */
#define BASE_CLK 13000000
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
new file mode 100644
index 0000000..3184bdc
--- /dev/null
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -0,0 +1,1108 @@
+/*
+ * arch/arm/mach-pxa/raumfeld.c
+ *
+ * Support for the following Raumfeld devices:
+ *
+ * * Controller
+ * * Connector
+ * * Speaker S/M
+ *
+ * See http://www.raumfeld.com for details.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+#include <linux/gpio_keys.h>
+#include <linux/input/eeti_ts.h>
+#include <linux/leds.h>
+#include <linux/w1-gpio.h>
+#include <linux/sched.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lis3lv02d.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/max8660.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* common GPIO definitions */
+
+/* inputs */
+#define GPIO_ON_OFF (14)
+#define GPIO_VOLENC_A (19)
+#define GPIO_VOLENC_B (20)
+#define GPIO_CHARGE_DONE (23)
+#define GPIO_CHARGE_IND (27)
+#define GPIO_TOUCH_IRQ (32)
+#define GPIO_ETH_IRQ (40)
+#define GPIO_SPI_MISO (98)
+#define GPIO_ACCEL_IRQ (104)
+#define GPIO_RESCUE_BOOT (115)
+#define GPIO_DOCK_DETECT (116)
+#define GPIO_KEY1 (117)
+#define GPIO_KEY2 (118)
+#define GPIO_KEY3 (119)
+#define GPIO_CHARGE_USB_OK (112)
+#define GPIO_CHARGE_DC_OK (101)
+#define GPIO_CHARGE_USB_SUSP (102)
+
+/* outputs */
+#define GPIO_SHUTDOWN_SUPPLY (16)
+#define GPIO_SHUTDOWN_BATT (18)
+#define GPIO_CHRG_PEN2 (31)
+#define GPIO_TFT_VA_EN (33)
+#define GPIO_SPDIF_CS (34)
+#define GPIO_LED2 (35)
+#define GPIO_LED1 (36)
+#define GPIO_SPDIF_RESET (38)
+#define GPIO_SPI_CLK (95)
+#define GPIO_MCLK_DAC_CS (96)
+#define GPIO_SPI_MOSI (97)
+#define GPIO_W1_PULLUP_ENABLE (105)
+#define GPIO_DISPLAY_ENABLE (106)
+#define GPIO_MCLK_RESET (111)
+#define GPIO_W2W_RESET (113)
+#define GPIO_W2W_PDN (114)
+#define GPIO_CODEC_RESET (120)
+#define GPIO_AUDIO_VA_ENABLE (124)
+#define GPIO_ACCEL_CS (125)
+#define GPIO_ONE_WIRE (126)
+
+/*
+ * GPIO configurations
+ */
+static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO77_UART1_RXD,
+ GPIO78_UART1_TXD,
+ GPIO79_UART1_CTS,
+ GPIO81_UART1_DSR,
+ GPIO83_UART1_DTR,
+ GPIO84_UART1_RTS,
+
+ /* UART3 */
+ GPIO110_UART3_RXD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* I2C */
+ GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+ GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* SPI */
+ GPIO34_GPIO, /* SPDIF_CS */
+ GPIO96_GPIO, /* MCLK_CS */
+ GPIO125_GPIO, /* ACCEL_CS */
+
+ /* MMC */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+
+ /* One-wire */
+ GPIO126_GPIO | MFP_LPM_FLOAT,
+ GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
+
+ /* CHRG_USB_OK */
+ GPIO101_GPIO | MFP_PULL_HIGH,
+ /* CHRG_USB_OK */
+ GPIO112_GPIO | MFP_PULL_HIGH,
+ /* CHRG_USB_SUSP */
+ GPIO102_GPIO,
+ /* DISPLAY_ENABLE */
+ GPIO106_GPIO,
+ /* DOCK_DETECT */
+ GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+};
+
+static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO77_UART1_RXD,
+ GPIO78_UART1_TXD,
+ GPIO79_UART1_CTS,
+ GPIO81_UART1_DSR,
+ GPIO83_UART1_DTR,
+ GPIO84_UART1_RTS,
+
+ /* UART3 */
+ GPIO110_UART3_RXD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* I2C */
+ GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+ GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* SPI */
+ GPIO34_GPIO, /* SPDIF_CS */
+ GPIO96_GPIO, /* MCLK_CS */
+ GPIO125_GPIO, /* ACCEL_CS */
+
+ /* MMC */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+
+ /* Ethernet */
+ GPIO1_nCS2, /* CS */
+ GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
+
+ /* SSP for I2S */
+ GPIO85_SSP1_SCLK,
+ GPIO89_SSP1_EXTCLK,
+ GPIO86_SSP1_FRM,
+ GPIO87_SSP1_TXD,
+ GPIO88_SSP1_RXD,
+ GPIO90_SSP1_SYSCLK,
+
+ /* SSP2 for S/PDIF */
+ GPIO25_SSP2_SCLK,
+ GPIO26_SSP2_FRM,
+ GPIO27_SSP2_TXD,
+ GPIO29_SSP2_EXTCLK,
+
+ /* LEDs */
+ GPIO35_GPIO | MFP_LPM_PULL_LOW,
+ GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO77_UART1_RXD,
+ GPIO78_UART1_TXD,
+ GPIO79_UART1_CTS,
+ GPIO81_UART1_DSR,
+ GPIO83_UART1_DTR,
+ GPIO84_UART1_RTS,
+
+ /* UART3 */
+ GPIO110_UART3_RXD,
+
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
+ /* I2C */
+ GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+ GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+ /* SPI */
+ GPIO34_GPIO, /* SPDIF_CS */
+ GPIO96_GPIO, /* MCLK_CS */
+ GPIO125_GPIO, /* ACCEL_CS */
+
+ /* MMC */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+
+ /* Ethernet */
+ GPIO1_nCS2, /* CS */
+ GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
+
+ /* SSP for I2S */
+ GPIO85_SSP1_SCLK,
+ GPIO89_SSP1_EXTCLK,
+ GPIO86_SSP1_FRM,
+ GPIO87_SSP1_TXD,
+ GPIO88_SSP1_RXD,
+ GPIO90_SSP1_SYSCLK,
+
+ /* LEDs */
+ GPIO35_GPIO | MFP_LPM_PULL_LOW,
+ GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+/*
+ * SMSC LAN9220 Ethernet
+ */
+
+static struct resource smc91x_resources[] = {
+ {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = gpio_to_irq(GPIO_ETH_IRQ),
+ .end = gpio_to_irq(GPIO_ETH_IRQ),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct smsc911x_platform_config raumfeld_smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &raumfeld_smsc911x_config,
+ }
+};
+
+/**
+ * NAND
+ */
+
+static struct mtd_partition raumfeld_nand_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = 0xa0000,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "BootloaderEnvironment",
+ .offset = 0xa0000,
+ .size = 0x20000,
+ },
+ {
+ .name = "BootloaderSplashScreen",
+ .offset = 0xc0000,
+ .size = 0x60000,
+ },
+ {
+ .name = "UBI",
+ .offset = 0x120000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .parts = raumfeld_nand_partitions,
+ .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
+};
+
+/**
+ * USB (OHCI) support
+ */
+
+static struct pxaohci_platform_data raumfeld_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1,
+};
+
+/**
+ * Rotary encoder input device
+ */
+
+static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
+ .steps = 24,
+ .axis = REL_X,
+ .relative_axis = 1,
+ .gpio_a = GPIO_VOLENC_A,
+ .gpio_b = GPIO_VOLENC_B,
+ .inverted_a = 1,
+ .inverted_b = 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+ .name = "rotary-encoder",
+ .id = 0,
+ .dev = {
+ .platform_data = &raumfeld_rotary_encoder_info,
+ }
+};
+
+/**
+ * GPIO buttons
+ */
+
+static struct gpio_keys_button gpio_keys_button[] = {
+ {
+ .code = KEY_F1,
+ .type = EV_KEY,
+ .gpio = GPIO_KEY1,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "Button 1",
+ },
+ {
+ .code = KEY_F2,
+ .type = EV_KEY,
+ .gpio = GPIO_KEY2,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "Button 2",
+ },
+ {
+ .code = KEY_F3,
+ .type = EV_KEY,
+ .gpio = GPIO_KEY3,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "Button 3",
+ },
+ {
+ .code = KEY_F4,
+ .type = EV_KEY,
+ .gpio = GPIO_RESCUE_BOOT,
+ .active_low = 0,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "rescue boot button",
+ },
+ {
+ .code = KEY_F5,
+ .type = EV_KEY,
+ .gpio = GPIO_DOCK_DETECT,
+ .active_low = 1,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "dock detect",
+ },
+ {
+ .code = KEY_F6,
+ .type = EV_KEY,
+ .gpio = GPIO_ON_OFF,
+ .active_low = 0,
+ .wakeup = 0,
+ .debounce_interval = 5, /* ms */
+ .desc = "on/off button",
+ },
+};
+
+static struct gpio_keys_platform_data gpio_keys_platform_data = {
+ .buttons = gpio_keys_button,
+ .nbuttons = ARRAY_SIZE(gpio_keys_button),
+ .rep = 0,
+};
+
+static struct platform_device raumfeld_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_keys_platform_data,
+ }
+};
+
+/**
+ * GPIO LEDs
+ */
+
+static struct gpio_led raumfeld_leds[] = {
+ {
+ .name = "raumfeld:1",
+ .gpio = GPIO_LED1,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "raumfeld:2",
+ .gpio = GPIO_LED2,
+ .active_low = 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data raumfeld_led_platform_data = {
+ .leds = raumfeld_leds,
+ .num_leds = ARRAY_SIZE(raumfeld_leds),
+};
+
+static struct platform_device raumfeld_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &raumfeld_led_platform_data,
+ },
+};
+
+/**
+ * One-wire (W1 bus) support
+ */
+
+static void w1_enable_external_pullup(int enable)
+{
+ gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
+ msleep(100);
+}
+
+static struct w1_gpio_platform_data w1_gpio_platform_data = {
+ .pin = GPIO_ONE_WIRE,
+ .is_open_drain = 0,
+ .enable_external_pullup = w1_enable_external_pullup,
+};
+
+struct platform_device raumfeld_w1_gpio_device = {
+ .name = "w1-gpio",
+ .dev = {
+ .platform_data = &w1_gpio_platform_data
+ }
+};
+
+static void __init raumfeld_w1_init(void)
+{
+ int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
+ "W1 external pullup enable");
+
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+ else
+ gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
+
+ platform_device_register(&raumfeld_w1_gpio_device);
+}
+
+/**
+ * Framebuffer device
+ */
+
+/* PWM controlled backlight */
+static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ /* 10000 ns = 10 ms ^= 100 kHz */
+ .pwm_period_ns = 10000,
+};
+
+static struct platform_device raumfeld_pwm_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &raumfeld_pwm_backlight_data,
+ }
+};
+
+/* LT3593 controlled backlight */
+static struct gpio_led raumfeld_lt3593_led = {
+ .name = "backlight",
+ .gpio = mfp_to_gpio(MFP_PIN_GPIO17),
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+};
+
+static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
+ .leds = &raumfeld_lt3593_led,
+ .num_leds = 1,
+};
+
+static struct platform_device raumfeld_lt3593_device = {
+ .name = "leds-lt3593",
+ .id = -1,
+ .dev = {
+ .platform_data = &raumfeld_lt3593_platform_data,
+ },
+};
+
+static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
+ .pixclock = 111000,
+ .xres = 480,
+ .yres = 272,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 2,
+ .right_margin = 1,
+ .vsync_len = 1,
+ .upper_margin = 3,
+ .lower_margin = 1,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
+ .modes = &sharp_lq043t3dx02_mode,
+ .num_modes = 1,
+ .video_mem_size = 0x400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init raumfeld_lcd_init(void)
+{
+ int ret;
+
+ set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+
+ /* Earlier devices had the backlight regulator controlled
+ * via PWM, later versions use another controller for that */
+ if ((system_rev & 0xff) < 2) {
+ mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+ pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+ platform_device_register(&raumfeld_pwm_backlight_device);
+ } else
+ platform_device_register(&raumfeld_lt3593_device);
+
+ ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+ else
+ gpio_direction_output(GPIO_TFT_VA_EN, 1);
+
+ ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+ else
+ gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+}
+
+/**
+ * SPI devices
+ */
+
+struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+ .sck = GPIO_SPI_CLK,
+ .mosi = GPIO_SPI_MOSI,
+ .miso = GPIO_SPI_MISO,
+ .num_chipselect = 3,
+};
+
+static struct platform_device raumfeld_spi_device = {
+ .name = "spi_gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &raumfeld_spi_platform_data,
+ }
+};
+
+static struct lis3lv02d_platform_data lis3_pdata = {
+ .click_flags = LIS3_CLICK_SINGLE_X |
+ LIS3_CLICK_SINGLE_Y |
+ LIS3_CLICK_SINGLE_Z,
+ .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
+ .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
+ LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
+ LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
+ .wakeup_thresh = 10,
+ .click_thresh_x = 10,
+ .click_thresh_y = 10,
+ .click_thresh_z = 10,
+};
+
+#define SPI_AK4104 \
+{ \
+ .modalias = "ak4104", \
+ .max_speed_hz = 10000, \
+ .bus_num = 0, \
+ .chip_select = 0, \
+ .controller_data = (void *) GPIO_SPDIF_CS, \
+}
+
+#define SPI_LIS3 \
+{ \
+ .modalias = "lis3lv02d_spi", \
+ .max_speed_hz = 1000000, \
+ .bus_num = 0, \
+ .chip_select = 1, \
+ .controller_data = (void *) GPIO_ACCEL_CS, \
+ .platform_data = &lis3_pdata, \
+ .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \
+}
+
+#define SPI_DAC7512 \
+{ \
+ .modalias = "dac7512", \
+ .max_speed_hz = 1000000, \
+ .bus_num = 0, \
+ .chip_select = 2, \
+ .controller_data = (void *) GPIO_MCLK_DAC_CS, \
+}
+
+static struct spi_board_info connector_spi_devices[] __initdata = {
+ SPI_AK4104,
+ SPI_DAC7512,
+};
+
+static struct spi_board_info speaker_spi_devices[] __initdata = {
+ SPI_DAC7512,
+};
+
+static struct spi_board_info controller_spi_devices[] __initdata = {
+ SPI_LIS3,
+};
+
+/**
+ * MMC for Marvell Libertas 8688 via SDIO
+ */
+
+static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
+{
+ gpio_set_value(GPIO_W2W_RESET, 1);
+ gpio_set_value(GPIO_W2W_PDN, 1);
+
+ return 0;
+}
+
+static void raumfeld_mci_exit(struct device *dev, void *data)
+{
+ gpio_set_value(GPIO_W2W_RESET, 0);
+ gpio_set_value(GPIO_W2W_PDN, 0);
+}
+
+static struct pxamci_platform_data raumfeld_mci_platform_data = {
+ .init = raumfeld_mci_init,
+ .exit = raumfeld_mci_exit,
+ .detect_delay = 20,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
+};
+
+/*
+ * External power / charge logic
+ */
+
+static int power_supply_init(struct device *dev)
+{
+ return 0;
+}
+
+static void power_supply_exit(struct device *dev)
+{
+}
+
+static int raumfeld_is_ac_online(void)
+{
+ return !gpio_get_value(GPIO_CHARGE_DC_OK);
+}
+
+static int raumfeld_is_usb_online(void)
+{
+ return 0;
+}
+
+static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = raumfeld_is_ac_online,
+ .is_usb_online = raumfeld_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = raumfeld_power_supplicants,
+ .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants)
+};
+
+static struct resource power_supply_resources[] = {
+ {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+ .start = GPIO_CHARGE_DC_OK,
+ .end = GPIO_CHARGE_DC_OK,
+ },
+};
+
+static irqreturn_t charge_done_irq(int irq, void *dev_id)
+{
+ struct power_supply *psy;
+
+ psy = power_supply_get_by_name("ds2760-battery.0");
+
+ if (psy)
+ power_supply_set_battery_charged(psy);
+
+ return IRQ_HANDLED;
+}
+
+static struct platform_device raumfeld_power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static void __init raumfeld_power_init(void)
+{
+ int ret;
+
+ /* Set PEN2 high to enable maximum charge current */
+ ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+ else
+ gpio_direction_output(GPIO_CHRG_PEN2, 1);
+
+ ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+
+ ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+ else
+ gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
+
+ power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
+ power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+
+ ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+ &charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
+ "charge_done", NULL);
+
+ if (ret < 0)
+ printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
+ GPIO_CHARGE_DONE);
+ else
+ platform_device_register(&raumfeld_power_supply);
+}
+
+/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
+
+static struct regulator_consumer_supply audio_va_consumer_supply =
+ REGULATOR_SUPPLY("va", "0-0048");
+
+struct regulator_init_data audio_va_initdata = {
+ .consumer_supplies = &audio_va_consumer_supply,
+ .num_consumer_supplies = 1,
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config audio_va_config = {
+ .supply_name = "audio_va",
+ .microvolts = 5000000,
+ .gpio = GPIO_AUDIO_VA_ENABLE,
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &audio_va_initdata,
+};
+
+static struct platform_device audio_va_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &audio_va_config,
+ },
+};
+
+/* Dummy supplies for Codec's VD/VLC */
+
+static struct regulator_consumer_supply audio_dummy_supplies[] = {
+ REGULATOR_SUPPLY("vd", "0-0048"),
+ REGULATOR_SUPPLY("vlc", "0-0048"),
+};
+
+struct regulator_init_data audio_dummy_initdata = {
+ .consumer_supplies = audio_dummy_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct fixed_voltage_config audio_dummy_config = {
+ .supply_name = "audio_vd",
+ .microvolts = 3300000,
+ .gpio = -1,
+ .init_data = &audio_dummy_initdata,
+};
+
+static struct platform_device audio_supply_dummy_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &audio_dummy_config,
+ },
+};
+
+static struct platform_device *audio_regulator_devices[] = {
+ &audio_va_device,
+ &audio_supply_dummy_device,
+};
+
+/**
+ * Regulator support via MAX8660
+ */
+
+static struct regulator_consumer_supply vcc_mmc_supply =
+ REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
+
+static struct regulator_init_data vcc_mmc_init_data = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE,
+ },
+ .consumer_supplies = &vcc_mmc_supply,
+ .num_consumer_supplies = 1,
+};
+
+struct max8660_subdev_data max8660_v6_subdev_data = {
+ .id = MAX8660_V6,
+ .name = "vmmc",
+ .platform_data = &vcc_mmc_init_data,
+};
+
+static struct max8660_platform_data max8660_pdata = {
+ .subdevs = &max8660_v6_subdev_data,
+ .num_subdevs = 1,
+};
+
+/**
+ * I2C devices
+ */
+
+static struct i2c_board_info raumfeld_pwri2c_board_info = {
+ .type = "max8660",
+ .addr = 0x34,
+ .platform_data = &max8660_pdata,
+};
+
+static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
+ .type = "cs4270",
+ .addr = 0x48,
+};
+
+static struct eeti_ts_platform_data eeti_ts_pdata = {
+ .irq_active_high = 1,
+};
+
+static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
+ .type = "eeti_ts",
+ .addr = 0x0a,
+ .irq = gpio_to_irq(GPIO_TOUCH_IRQ),
+ .platform_data = &eeti_ts_pdata,
+};
+
+static struct platform_device *raumfeld_common_devices[] = {
+ &raumfeld_gpio_keys_device,
+ &raumfeld_led_device,
+ &raumfeld_spi_device,
+};
+
+static void __init raumfeld_audio_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
+ if (ret < 0)
+ pr_warning("unable to request GPIO_CODEC_RESET\n");
+ else
+ gpio_direction_output(GPIO_CODEC_RESET, 1);
+
+ ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
+ if (ret < 0)
+ pr_warning("unable to request GPIO_SPDIF_RESET\n");
+ else
+ gpio_direction_output(GPIO_SPDIF_RESET, 1);
+
+ ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
+ if (ret < 0)
+ pr_warning("unable to request GPIO_MCLK_RESET\n");
+ else
+ gpio_direction_output(GPIO_MCLK_RESET, 1);
+
+ platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
+}
+
+static void __init raumfeld_common_init(void)
+{
+ int ret;
+
+ /* The on/off button polarity has changed after revision 1 */
+ if ((system_rev & 0xff) > 1) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
+ if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+ gpio_keys_button[i].active_low = 1;
+ }
+
+ enable_irq_wake(IRQ_WAKEUP0);
+
+ pxa3xx_set_nand_info(&raumfeld_nand_info);
+ pxa3xx_set_i2c_power_info(NULL);
+ pxa_set_ohci_info(&raumfeld_ohci_info);
+ pxa_set_mci_info(&raumfeld_mci_platform_data);
+ pxa_set_i2c_info(NULL);
+ pxa_set_ffuart_info(NULL);
+
+ ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_W2W_RESET\n");
+ else
+ gpio_direction_output(GPIO_W2W_RESET, 0);
+
+ ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_W2W_PDN\n");
+ else
+ gpio_direction_output(GPIO_W2W_PDN, 0);
+
+ /* this can be used to switch off the device */
+ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
+ "supply shutdown");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+ else
+ gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
+
+ platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
+ i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
+}
+
+static void __init raumfeld_controller_init(void)
+{
+ int ret;
+
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+ platform_device_register(&rotary_encoder_device);
+ spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
+ i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
+
+ ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
+ if (ret < 0)
+ pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+ else
+ gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
+
+ raumfeld_common_init();
+ raumfeld_power_init();
+ raumfeld_lcd_init();
+ raumfeld_w1_init();
+}
+
+static void __init raumfeld_connector_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
+ spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
+ i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+ platform_device_register(&smc91x_device);
+
+ raumfeld_audio_init();
+ raumfeld_common_init();
+}
+
+static void __init raumfeld_speaker_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
+ spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
+ i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+ platform_device_register(&smc91x_device);
+ platform_device_register(&rotary_encoder_device);
+
+ raumfeld_audio_init();
+ raumfeld_common_init();
+}
+
+/* physical memory regions */
+#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */
+
+#ifdef CONFIG_MACH_RAUMFELD_RC
+MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .init_machine = raumfeld_controller_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
+MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .init_machine = raumfeld_connector_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
+MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .init_machine = raumfeld_speaker_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 28352c0..19b5109 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -56,25 +56,7 @@
GPIO80_nCS_4, /* SCOOP #1 */
/* LCD - 16bpp Active TFT */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
+ GPIOxx_LCD_TFT_16BPP,
/* PC Card */
GPIO48_nPOE,
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9ebe658..a81d6db 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -35,6 +35,8 @@
#include <mach/ssp.h>
#include <mach/regs-ssp.h>
+#ifdef CONFIG_PXA_SSP_LEGACY
+
#define TIMEOUT 100000
static irqreturn_t ssp_interrupt(int irq, void *dev_id)
@@ -303,6 +305,7 @@
clk_disable(ssp->clk);
ssp_free(ssp);
}
+#endif /* CONFIG_PXA_SSP_LEGACY */
static DEFINE_MUTEX(ssp_lock);
static LIST_HEAD(ssp_list);
@@ -488,6 +491,7 @@
arch_initcall(pxa_ssp_init);
module_exit(pxa_ssp_exit);
+#ifdef CONFIG_PXA_SSP_LEGACY
EXPORT_SYMBOL(ssp_write_word);
EXPORT_SYMBOL(ssp_read_word);
EXPORT_SYMBOL(ssp_flush);
@@ -498,6 +502,7 @@
EXPORT_SYMBOL(ssp_init);
EXPORT_SYMBOL(ssp_exit);
EXPORT_SYMBOL(ssp_config);
+#endif
MODULE_DESCRIPTION("PXA SSP driver");
MODULE_AUTHOR("Liam Girdwood");
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 750c448..293e40a 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -76,14 +76,12 @@
static int
pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
{
- unsigned long flags, next, oscr;
+ unsigned long next, oscr;
- raw_local_irq_save(flags);
OIER |= OIER_E0;
next = OSCR + delta;
OSMR0 = next;
oscr = OSCR;
- raw_local_irq_restore(flags);
return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
}
@@ -91,23 +89,17 @@
static void
pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
{
- unsigned long irqflags;
-
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
- raw_local_irq_save(irqflags);
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
- raw_local_irq_restore(irqflags);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* initializing, released, or preparing for suspend */
- raw_local_irq_save(irqflags);
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
- raw_local_irq_restore(irqflags);
break;
case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c854c16..ad552791 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/pda_power.h>
#include <linux/spi/spi.h>
+#include <linux/input/matrix_keypad.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -131,24 +132,24 @@
GPIO45_BTUART_RTS,
/* Keybd */
- GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
- GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
+ GPIO58_GPIO | MFP_LPM_DRIVE_LOW, /* Column 0 */
+ GPIO59_GPIO | MFP_LPM_DRIVE_LOW, /* Column 1 */
+ GPIO60_GPIO | MFP_LPM_DRIVE_LOW, /* Column 2 */
+ GPIO61_GPIO | MFP_LPM_DRIVE_LOW, /* Column 3 */
+ GPIO62_GPIO | MFP_LPM_DRIVE_LOW, /* Column 4 */
+ GPIO63_GPIO | MFP_LPM_DRIVE_LOW, /* Column 5 */
+ GPIO64_GPIO | MFP_LPM_DRIVE_LOW, /* Column 6 */
+ GPIO65_GPIO | MFP_LPM_DRIVE_LOW, /* Column 7 */
+ GPIO66_GPIO | MFP_LPM_DRIVE_LOW, /* Column 8 */
+ GPIO67_GPIO | MFP_LPM_DRIVE_LOW, /* Column 9 */
+ GPIO68_GPIO | MFP_LPM_DRIVE_LOW, /* Column 10 */
+ GPIO69_GPIO | MFP_LPM_DRIVE_LOW, /* Row 0 */
+ GPIO70_GPIO | MFP_LPM_DRIVE_LOW, /* Row 1 */
+ GPIO71_GPIO | MFP_LPM_DRIVE_LOW, /* Row 2 */
+ GPIO72_GPIO | MFP_LPM_DRIVE_LOW, /* Row 3 */
+ GPIO73_GPIO | MFP_LPM_DRIVE_LOW, /* Row 4 */
+ GPIO74_GPIO | MFP_LPM_DRIVE_LOW, /* Row 5 */
+ GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* Row 6 */
/* SPI */
GPIO81_SSP2_CLK_OUT,
@@ -411,9 +412,87 @@
/*
* Tosa Keyboard
*/
+static const uint32_t tosakbd_keymap[] = {
+ KEY(0, 2, KEY_W),
+ KEY(0, 6, KEY_K),
+ KEY(0, 7, KEY_BACKSPACE),
+ KEY(0, 8, KEY_P),
+ KEY(1, 1, KEY_Q),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_T),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 6, KEY_O),
+ KEY(1, 7, KEY_I),
+ KEY(1, 8, KEY_COMMA),
+ KEY(2, 1, KEY_A),
+ KEY(2, 2, KEY_D),
+ KEY(2, 3, KEY_G),
+ KEY(2, 4, KEY_U),
+ KEY(2, 6, KEY_L),
+ KEY(2, 7, KEY_ENTER),
+ KEY(2, 8, KEY_DOT),
+ KEY(3, 1, KEY_Z),
+ KEY(3, 2, KEY_C),
+ KEY(3, 3, KEY_V),
+ KEY(3, 4, KEY_J),
+ KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
+ KEY(3, 6, TOSA_KEY_CANCEL),
+ KEY(3, 7, TOSA_KEY_CENTER),
+ KEY(3, 8, TOSA_KEY_OK),
+ KEY(3, 9, KEY_LEFTSHIFT),
+ KEY(4, 1, KEY_S),
+ KEY(4, 2, KEY_R),
+ KEY(4, 3, KEY_B),
+ KEY(4, 4, KEY_N),
+ KEY(4, 5, TOSA_KEY_CALENDAR),
+ KEY(4, 6, TOSA_KEY_HOMEPAGE),
+ KEY(4, 7, KEY_LEFTCTRL),
+ KEY(4, 8, TOSA_KEY_LIGHT),
+ KEY(4, 10, KEY_RIGHTSHIFT),
+ KEY(5, 1, KEY_TAB),
+ KEY(5, 2, KEY_SLASH),
+ KEY(5, 3, KEY_H),
+ KEY(5, 4, KEY_M),
+ KEY(5, 5, TOSA_KEY_MENU),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 11, TOSA_KEY_FN),
+ KEY(6, 1, KEY_X),
+ KEY(6, 2, KEY_F),
+ KEY(6, 3, KEY_SPACE),
+ KEY(6, 4, KEY_APOSTROPHE),
+ KEY(6, 5, TOSA_KEY_MAIL),
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+};
+
+static struct matrix_keymap_data tosakbd_keymap_data = {
+ .keymap = tosakbd_keymap,
+ .keymap_size = ARRAY_SIZE(tosakbd_keymap),
+};
+
+static const int tosakbd_col_gpios[] =
+ { 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
+static const int tosakbd_row_gpios[] =
+ { 69, 70, 71, 72, 73, 74, 75 };
+
+static struct matrix_keypad_platform_data tosakbd_pdata = {
+ .keymap_data = &tosakbd_keymap_data,
+ .row_gpios = tosakbd_row_gpios,
+ .col_gpios = tosakbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(tosakbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(tosakbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
static struct platform_device tosakbd_device = {
- .name = "tosa-keyboard",
+ .name = "matrix-keypad",
.id = -1,
+ .dev = {
+ .platform_data = &tosakbd_pdata,
+ },
};
static struct gpio_keys_button tosa_gpio_keys[] = {
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 0aa858e..797f254 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -72,27 +72,14 @@
GPIO79_nCS_3, /* Logic CS */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
/* LCD - 16bpp Active TFT */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
- GPIO77_LCD_BIAS,
+ GPIOxx_LCD_TFT_16BPP,
/* UART */
GPIO9_FFUART_CTS,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 89f258c..1dd1334 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -281,7 +281,7 @@
do {
/* we're in a chained irq handler,
* so ack the interrupt by hand */
- GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+ desc->chip->ack(irq);
if (likely(pending)) {
irq = viper_bit_to_irq(__ffs(pending));
@@ -711,6 +711,12 @@
GPIO80_nCS_4,
GPIO33_nCS_5,
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
/* FP Backlight */
GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 75f2a37..39896d8 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/apm-emulation.h>
+#include <linux/can/platform/mcp251x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -387,11 +388,47 @@
.enable_dma = 1,
};
-static struct platform_device pxa2xx_spi_ssp3_device = {
- .name = "pxa2xx-spi",
- .id = 3,
- .dev = {
- .platform_data = &pxa2xx_spi_ssp3_master_info,
+/* CAN bus on SPI */
+static int zeus_mcp2515_setup(struct spi_device *sdev)
+{
+ int err;
+
+ err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
+ if (err)
+ return err;
+
+ err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
+ if (err) {
+ gpio_free(ZEUS_CAN_SHDN_GPIO);
+ return err;
+ }
+
+ return 0;
+}
+
+static int zeus_mcp2515_transceiver_enable(int enable)
+{
+ gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
+ return 0;
+}
+
+static struct mcp251x_platform_data zeus_mcp2515_pdata = {
+ .oscillator_frequency = 16*1000*1000,
+ .model = CAN_MCP251X_MCP2515,
+ .board_specific_setup = zeus_mcp2515_setup,
+ .transceiver_enable = zeus_mcp2515_transceiver_enable,
+ .power_enable = zeus_mcp2515_transceiver_enable,
+};
+
+static struct spi_board_info zeus_spi_board_info[] = {
+ [0] = {
+ .modalias = "mcp251x",
+ .platform_data = &zeus_mcp2515_pdata,
+ .irq = gpio_to_irq(ZEUS_CAN_GPIO),
+ .max_speed_hz = 1*1000*1000,
+ .bus_num = 3,
+ .mode = SPI_MODE_0,
+ .chip_select = 0,
},
};
@@ -457,15 +494,28 @@
},
};
+static struct resource zeus_max6369_resource = {
+ .start = ZEUS_CPLD_EXTWDOG_PHYS,
+ .end = ZEUS_CPLD_EXTWDOG_PHYS,
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device zeus_max6369_device = {
+ .name = "max6369_wdt",
+ .id = -1,
+ .resource = &zeus_max6369_resource,
+ .num_resources = 1,
+};
+
static struct platform_device *zeus_devices[] __initdata = {
&zeus_serial_device,
&zeus_mtd_devices[0],
&zeus_dm9k0_device,
&zeus_dm9k1_device,
&zeus_sram_device,
- &pxa2xx_spi_ssp3_device,
&zeus_leds_device,
&zeus_pcmcia_device,
+ &zeus_max6369_device,
};
/* AC'97 */
@@ -509,7 +559,9 @@
static struct pxaohci_platform_data zeus_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
- .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ /* Clear Power Control Polarity Low and set Power Sense
+ * Polarity Low. Supply power to USB ports. */
+ .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW,
.init = zeus_ohci_init,
.exit = zeus_ohci_exit,
};
@@ -621,11 +673,15 @@
.udc_command = zeus_udc_command,
};
+#ifdef CONFIG_PM
static void zeus_power_off(void)
{
local_irq_disable();
pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
}
+#else
+#define zeus_power_off NULL
+#endif
#ifdef CONFIG_APM_EMULATION
static void zeus_get_power_status(struct apm_power_info *info)
@@ -706,6 +762,12 @@
};
static mfp_cfg_t zeus_pin_config[] __initdata = {
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO80_nCS_4,
@@ -731,6 +793,11 @@
GPIO104_CIF_DD_2,
GPIO105_CIF_DD_1,
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+ GPIO83_SSP3_SFRM,
+ GPIO84_SSP3_SCLK,
+
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
@@ -785,6 +852,8 @@
pxa_set_ac97_info(&zeus_ac97_info);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+ pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
+ spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
}
static struct map_desc zeus_io_desc[] __initdata = {
@@ -807,12 +876,6 @@
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_EXTWDOG,
- .pfn = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
- .length = 0x1000,
- .type = MT_DEVICE,
- },
- {
.virtual = ZEUS_PC104IO,
.pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
.length = 0x00800000,
@@ -837,7 +900,7 @@
PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
}
-MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
.phys_io = 0x40000000,
.io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc),
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 63b753f..0d8e043 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -21,7 +21,7 @@
#include <mach/dma.h>
#include <plat/cpu.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
similarity index 96%
rename from arch/arm/mach-s3c2410/include/mach/gpio-core.h
rename to arch/arm/mach-s3c2410/include/mach/gpio-track.h
index f8b879a..acb2591 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -15,7 +15,6 @@
#ifndef __ASM_ARCH_GPIO_CORE_H
#define __ASM_ARCH_GPIO_CORE_H __FILE__
-#include <plat/gpio-core.h>
#include <mach/regs-gpio.h>
extern struct s3c_gpio_chip s3c24xx_gpios[];
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
similarity index 96%
rename from arch/arm/plat-s3c24xx/include/plat/pm-core.h
rename to arch/arm/mach-s3c2410/include/mach/pm-core.h
index fb45dd9..70a83b2 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+/* linux/arch/arm/mach-s3c2410/include/pm-core.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index ebc85c6..fd672f3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -406,31 +406,31 @@
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2443_GPE6_AC_SDI (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI (0x03 << 14)
+#define S3C2443_GPE7_AC_SDO (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO (0x03 << 16)
+#define S3C2443_GPE8_AC_SYNC (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 6026d09..d87ebe0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -42,23 +42,14 @@
#define S3C2443_PLLCON_OFF (1<<24)
-#define S3C2443_CLKSRC_I2S_EXT (1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
-#define S3C2443_CLKSRC_I2S_MASK (3<<14)
-
#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7)
#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7)
#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7)
#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7)
#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7)
-#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
-#define S3C2443_CLKDIV0_DVS (1<<13)
#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
@@ -81,28 +72,7 @@
#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
#define S3C2443_CLKCON_NAND
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
similarity index 99%
rename from arch/arm/plat-s3c/include/mach/timex.h
rename to arch/arm/mach-s3c2410/include/mach/timex.h
index 2a425ed..fe9ca1f 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
similarity index 85%
rename from arch/arm/plat-s3c/include/mach/vmalloc.h
rename to arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 299d95f..315b007 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
@@ -15,6 +15,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xe0000000UL)
+#define VMALLOC_END (0xE0000000)
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84ad..7047317 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -153,7 +153,7 @@
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fd..02b1b622 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -584,7 +584,7 @@
// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe..fbedd07 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -196,7 +196,7 @@
.id = -1,
};
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
.gpio_detect = S3C2410_GPF(5),
.gpio_wprotect = S3C2410_GPH(8),
.set_power = NULL,
@@ -272,7 +272,7 @@
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_ts,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
@@ -311,12 +311,11 @@
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
+ s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
s3c_i2c0_set_platdata(NULL);
- s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712..684710f 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -322,7 +322,7 @@
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_usbgadget,
&n30_button_device,
&n30_blue_led,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261..d8c7f2e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@
/* Standard OTOM devices */
static struct platform_device *otom11_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bc..92a4ec3 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -246,7 +246,7 @@
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126c..4522230 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@
};
static struct platform_device *smdk2410_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb043..929164a 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb5..9051f0d 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d8..29bd3d9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@
}
}
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
.port[0] = {
.flags = S3C_HCDFLG_USED
},
@@ -127,6 +127,6 @@
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
- s3c_device_usb.dev.platform_data = &usb_simtec_info;
+ s3c_ohci_set_platdata(&usb_simtec_info);
return 0;
}
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index a037df5..0c0505b 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -124,7 +124,9 @@
.name = "usysclk",
.id = -1,
.parent = &clk_xtal,
- .set_parent = s3c2412_setparent_usysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_usysclk,
+ },
};
static struct clk clk_mrefclk = {
@@ -199,10 +201,12 @@
static struct clk clk_usbsrc = {
.name = "usbsrc",
.id = -1,
- .get_rate = s3c2412_getrate_usbsrc,
- .set_rate = s3c2412_setrate_usbsrc,
- .round_rate = s3c2412_roundrate_usbsrc,
- .set_parent = s3c2412_setparent_usbsrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_usbsrc,
+ .set_rate = s3c2412_setrate_usbsrc,
+ .round_rate = s3c2412_roundrate_usbsrc,
+ .set_parent = s3c2412_setparent_usbsrc,
+ },
};
static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
@@ -225,7 +229,9 @@
static struct clk clk_msysclk = {
.name = "msysclk",
.id = -1,
- .set_parent = s3c2412_setparent_msysclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_msysclk,
+ },
};
static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
@@ -264,7 +270,9 @@
.name = "armclk",
.id = -1,
.parent = &clk_msysclk,
- .set_parent = s3c2412_setparent_armclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2412_setparent_armclk,
+ },
};
/* these next clocks have an divider immediately after them,
@@ -337,10 +345,12 @@
static struct clk clk_uart = {
.name = "uartclk",
.id = -1,
- .get_rate = s3c2412_getrate_uart,
- .set_rate = s3c2412_setrate_uart,
- .set_parent = s3c2412_setparent_uart,
- .round_rate = s3c2412_roundrate_clksrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_uart,
+ .set_rate = s3c2412_setrate_uart,
+ .set_parent = s3c2412_setparent_uart,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
};
static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
@@ -388,10 +398,12 @@
static struct clk clk_i2s = {
.name = "i2sclk",
.id = -1,
- .get_rate = s3c2412_getrate_i2s,
- .set_rate = s3c2412_setrate_i2s,
- .set_parent = s3c2412_setparent_i2s,
- .round_rate = s3c2412_roundrate_clksrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_i2s,
+ .set_rate = s3c2412_setrate_i2s,
+ .set_parent = s3c2412_setparent_i2s,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
};
static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
@@ -438,10 +450,12 @@
static struct clk clk_cam = {
.name = "camif-upll", /* same as 2440 name */
.id = -1,
- .get_rate = s3c2412_getrate_cam,
- .set_rate = s3c2412_setrate_cam,
- .set_parent = s3c2412_setparent_cam,
- .round_rate = s3c2412_roundrate_clksrc,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2412_getrate_cam,
+ .set_rate = s3c2412_setrate_cam,
+ .set_parent = s3c2412_setparent_cam,
+ .round_rate = s3c2412_roundrate_clksrc,
+ },
};
/* standard clock definitions */
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index f8d16fc..e880524 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,7 +20,7 @@
#include <mach/dma.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fc..14f4798 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -468,7 +468,7 @@
/* The platform devices being used. */
static struct platform_device *jive_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e4341..0392065 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -104,8 +104,7 @@
static struct platform_device *smdk2413_devices[] __initdata = {
- &s3c_device_usb,
- //&s3c_device_lcd,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591..3ca9265 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@
};
static struct platform_device *vstms_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8087935..7f46526 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -15,14 +15,67 @@
help
Support for S3C2440 Samsung Mobile CPU based systems.
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2410
+ select CPU_ARM920T
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ select CPU_LLSERIAL_S3C2440
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C2440_DMA
bool
depends on ARCH_S3C2410 && CPU_S3C24405B
help
Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
@@ -37,6 +90,18 @@
Say Y here if you are using the Simtec Electronics ANUBIS
development system
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select CPU_S3C2442
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select I2C
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
@@ -94,11 +159,14 @@
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ select CPU_S3C2442
+
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f32245..c85ba32 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,10 +10,20 @@
obj- :=
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+
obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
# Machine support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
@@ -23,6 +33,7 @@
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
# extra machine support
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index d1c29b2..3dc2426 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -98,8 +98,10 @@
static struct clk s3c2440_clk_cam_upll = {
.name = "camif-upll",
.id = -1,
- .set_rate = s3c2440_camif_upll_setrate,
- .round_rate = s3c2440_camif_upll_round,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2440_camif_upll_setrate,
+ .round_rate = s3c2440_camif_upll_round,
+ },
};
static struct clk s3c2440_clk_ac97 = {
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index e08e081..3b0529f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -20,7 +20,7 @@
#include <mach/map.h>
#include <mach/dma.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 5540442..9ea66e3 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
#include <mach/regs-dsc.h>
#include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
similarity index 100%
rename from arch/arm/mach-s3c2442/include/mach/gta02.h
rename to arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3e..b73f78a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290..8472579 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -165,7 +165,7 @@
},
};
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
.gpio_detect = S3C2410_GPG(10),
};
@@ -203,7 +203,7 @@
};
static struct platform_device *at2440evb_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c0,
@@ -216,8 +216,6 @@
static void __init at2440evb_map_io(void)
{
- s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
@@ -226,6 +224,7 @@
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
s3c_nand_set_platdata(&at2440evb_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
similarity index 98%
rename from arch/arm/mach-s3c2442/mach-gta02.c
rename to arch/arm/mach-s3c2440/mach-gta02.c
index 0b4a3a0..45799c6 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -544,7 +544,7 @@
/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
.port[0] = {
.flags = S3C_HCDFLG_USED,
},
@@ -565,7 +565,7 @@
/* These are the guys that don't need to be children of PMU. */
static struct platform_device *gta02_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_sdi,
&s3c_device_usbgadget,
@@ -623,9 +623,8 @@
INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
#endif
- s3c_device_usb.dev.platform_data = >a02_usb_info;
-
s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c_ohci_set_platdata(>a02_usb_info);
s3c_nand_set_platdata(>a02_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e90..571b176 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -506,9 +506,8 @@
};
static struct platform_device *mini2440_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_wdt,
-/* &s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usbgadget,
@@ -522,8 +521,6 @@
&s3c_device_sdi,
&s3c_device_iis,
&mini2440_audio,
-/* &s3c_device_timer[0],*/ /* buzzer pwm, no API for it */
- /* remaining devices are optional */
};
static void __init mini2440_map_io(void)
@@ -531,8 +528,6 @@
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
- s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
}
/*
@@ -678,6 +673,7 @@
}
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
s3c_nand_set_platdata(&mini2440_nand_info);
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43eded..3420415 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -41,7 +41,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -106,7 +106,7 @@
/* Standard Nexcoder devices */
static struct platform_device *nexcoder_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13a..1e836e5 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@
};
static struct platform_device *rx3715_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e74..3ac3d63 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -150,7 +150,7 @@
};
static struct platform_device *smdk2440_devices[] __initdata = {
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
rename to arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index 49f6503..f105d5e 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
rename to arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index 7679af1..c8a8f90 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea..2b68f7e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/s3c2440.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2440/s3c2442.c
similarity index 89%
rename from arch/arm/mach-s3c2442/clock.c
rename to arch/arm/mach-s3c2440/s3c2442.c
index ea1aa1f..188ad1e 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -1,10 +1,10 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2442 Clock support
+ * S3C2442 core and lock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -109,8 +109,10 @@
static struct clk s3c2442_clk_cam_upll = {
.name = "camif-upll",
.id = -1,
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
+ .ops = &(struct clk_ops) {
+ .set_rate = s3c2442_camif_upll_setrate,
+ .round_rate = s3c2442_camif_upll_round,
+ },
};
static int s3c2442_clk_add(struct sys_device *sysdev)
@@ -149,3 +151,15 @@
}
arch_initcall(s3c2442_clk_init);
+
+
+static struct sys_device s3c2442_sysdev = {
+ .cls = &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+ printk("S3C2442: Initialising architecture\n");
+
+ return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
similarity index 97%
rename from arch/arm/plat-s3c24xx/s3c244x-clock.c
rename to arch/arm/mach-s3c2440/s3c244x-clock.c
index 7937109..f8d9613 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -68,7 +68,9 @@
static struct clk clk_arm = {
.name = "armclk",
.id = -1,
- .set_parent = s3c2440_setparent_armclk,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2440_setparent_armclk,
+ },
};
static int s3c244x_clk_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-irq.c
rename to arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c244x.c
rename to arch/arm/mach-s3c2440/s3c244x.c
index 12623a4..5e4a97e 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -38,8 +38,7 @@
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 8d38118..0000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2442
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_GPIO
- select S3C2410_PM if PM
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
- select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select CPU_S3C2442
- select MFD_PCF50633
- select PCF50633_GPIO
- select I2C
- select POWER_SUPPLY
- select MACH_NEO1973
- select S3C2410_PWM
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 2a19113..0000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += clock.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
-# Machine support
-
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
deleted file mode 100644
index 4663bdc..0000000
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-
-#include <plat/s3c2442.h>
-#include <plat/cpu.h>
-
-static struct sys_device s3c2442_sysdev = {
- .cls = &s3c2442_sysclass,
-};
-
-int __init s3c2442_init(void)
-{
- printk("S3C2442: Initialising architecture\n");
-
- return sysdev_register(&s3c2442_sysdev);
-}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4314c44..698140a 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -7,6 +7,7 @@
depends on ARCH_S3C2410
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
+ select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 2785d69..62cd4ea 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2443/clock.c
*
- * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2443 Clock control support
@@ -42,6 +42,7 @@
#include <plat/s3c2443.h>
#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
/* We currently have to assume that the system is running
@@ -53,141 +54,69 @@
* set the correct muxing at initialisation
*/
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2443_HCLKCON);
+ u32 ctrlbit = clk->ctrlbit;
+ u32 con = __raw_readl(reg);
if (enable)
- clkcon |= clocks;
+ con |= ctrlbit;
else
- clkcon &= ~clocks;
+ con &= ~ctrlbit;
- __raw_writel(clkcon, S3C2443_HCLKCON);
-
+ __raw_writel(con, reg);
return 0;
}
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+ return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
+}
+
static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2443_PCLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- __raw_writel(clkcon, S3C2443_PCLKCON);
-
- return 0;
+ return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
}
static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2443_SCLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- __raw_writel(clkcon, S3C2443_SCLKCON);
-
- return 0;
-}
-
-static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
- unsigned long rate,
- unsigned int max)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations as they cancel out */
-
- div = (rate / parent_rate);
-
- if (div < 1)
- div = 1;
- else if (div > max)
- div = max;
-
- return parent_rate / div;
-}
-
-static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
- unsigned long rate)
-{
- return s3c2443_roundrate_clksrc(clk, rate, 4);
-}
-
-static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
- unsigned long rate)
-{
- return s3c2443_roundrate_clksrc(clk, rate, 16);
-}
-
-static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
- unsigned long rate)
-{
- return s3c2443_roundrate_clksrc(clk, rate, 256);
+ return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
}
/* clock selections */
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
static struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
.id = -1,
};
-#if 0
-static struct clk clk_mpll = {
- .name = "mpll",
- .parent = &clk_mpllref,
- .id = -1,
-};
-#endif
-
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
.id = -1,
};
-static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_epllref_sources[] = {
+ [0] = &clk_mpllref,
+ [1] = &clk_mpllref,
+ [2] = &clk_xtal,
+ [3] = &clk_ext,
+};
- clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
-
- if (parent == &clk_xtal)
- clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
- else if (parent == &clk_ext)
- clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
- else if (parent != &clk_mpllref)
- return -EINVAL;
-
- __raw_writel(clksrc, S3C2443_CLKSRC);
- clk->parent = parent;
-
- return 0;
-}
-
-static struct clk clk_epllref = {
- .name = "epllref",
- .id = -1,
- .set_parent = s3c2443_setparent_epllref,
+static struct clksrc_clk clk_epllref = {
+ .clk = {
+ .name = "epllref",
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_epllref_sources,
+ .nr_sources = ARRAY_SIZE(clk_epllref_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
};
static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
@@ -205,34 +134,29 @@
.name = "mdivclk",
.parent = &clk_mpllref,
.id = -1,
- .get_rate = s3c2443_getrate_mdivclk,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_getrate_mdivclk,
+ },
};
-static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_msysclk_sources[] = {
+ [0] = &clk_mpllref,
+ [1] = &clk_mpll,
+ [2] = &clk_mdivclk,
+ [3] = &clk_mpllref,
+};
- clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
- S3C2443_CLKSRC_EXTCLK_DIV);
-
- if (parent == &clk_mpll)
- clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
- else if (parent == &clk_mdivclk)
- clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
- else if (parent != &clk_mpllref)
- return -EINVAL;
-
- __raw_writel(clksrc, S3C2443_CLKSRC);
- clk->parent = parent;
-
- return 0;
-}
-
-static struct clk clk_msysclk = {
- .name = "msysclk",
- .parent = &clk_xtal,
- .id = -1,
- .set_parent = s3c2443_setparent_msysclk,
+static struct clksrc_clk clk_msysclk = {
+ .clk = {
+ .name = "msysclk",
+ .parent = &clk_xtal,
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_msysclk_sources,
+ .nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
};
/* armdiv
@@ -241,39 +165,105 @@
* divider values applied to it to then be fed into armclk.
*/
+/* armdiv divisor table */
+
+static unsigned int armdiv[16] = {
+ [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
+ [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
+ [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
+ [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
+ [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
+ [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
+ [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
+ [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
+};
+
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+ clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+
+ return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ unsigned long calc;
+ unsigned best = 256; /* bigger than any value */
+ unsigned div;
+ int ptr;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+ div = armdiv[ptr];
+ calc = parent / div;
+ if (calc <= rate && div < best)
+ best = div;
+ }
+
+ return parent / best;
+}
+
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ unsigned long calc;
+ unsigned div;
+ unsigned best = 256; /* bigger than any value */
+ int ptr;
+ int val = -1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+ div = armdiv[ptr];
+ calc = parent / div;
+ if (calc <= rate && div < best) {
+ best = div;
+ val = ptr;
+ }
+ }
+
+ if (val >= 0) {
+ unsigned long clkcon0;
+
+ clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+ clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+ clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+ __raw_writel(clkcon0, S3C2443_CLKDIV0);
+ }
+
+ return (val == -1) ? -EINVAL : 0;
+}
+
static struct clk clk_armdiv = {
.name = "armdiv",
.id = -1,
- .parent = &clk_msysclk,
+ .parent = &clk_msysclk.clk,
+ .ops = &(struct clk_ops) {
+ .round_rate = s3c2443_armclk_roundrate,
+ .set_rate = s3c2443_armclk_setrate,
+ },
};
/* armclk
*
- * this is the clock fed into the ARM core itself, either from
- * armdiv or from hclk.
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
*/
-static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clkdiv0;
+static struct clk *clk_arm_sources[] = {
+ [0] = &clk_armdiv,
+ [1] = &clk_h,
+};
- clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- if (parent == &clk_armdiv)
- clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
- else if (parent == &clk_h)
- clkdiv0 |= S3C2443_CLKDIV0_DVS;
- else
- return -EINVAL;
-
- __raw_writel(clkdiv0, S3C2443_CLKDIV0);
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .set_parent = s3c2443_setparent_armclk,
+static struct clksrc_clk clk_arm = {
+ .clk = {
+ .name = "armclk",
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_arm_sources,
+ .nr_sources = ARRAY_SIZE(clk_arm_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
};
/* esysclk
@@ -281,28 +271,22 @@
* this is sourced from either the EPLL or the EPLLref clock
*/
-static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+static struct clk *clk_sysclk_sources[] = {
+ [0] = &clk_epllref.clk,
+ [1] = &clk_epll,
+};
- if (parent == &clk_epll)
- clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
- else if (parent == &clk_epllref)
- clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
- else
- return -EINVAL;
-
- __raw_writel(clksrc, S3C2443_CLKSRC);
- clk->parent = parent;
-
- return 0;
-}
-
-static struct clk clk_esysclk = {
- .name = "esysclk",
- .parent = &clk_epll,
- .id = -1,
- .set_parent = s3c2443_setparent_esysclk,
+static struct clksrc_clk clk_esysclk = {
+ .clk = {
+ .name = "esysclk",
+ .parent = &clk_epll,
+ .id = -1,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_sysclk_sources,
+ .nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
};
/* uartclk
@@ -310,83 +294,30 @@
* UART baud-rate clock sourced from esysclk via a divisor
*/
-static unsigned long s3c2443_getrate_uart(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_UARTDIV_MASK;
- div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc16(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_uart = {
- .name = "uartclk",
- .id = -1,
- .parent = &clk_esysclk,
- .get_rate = s3c2443_getrate_uart,
- .set_rate = s3c2443_setrate_uart,
- .round_rate = s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_uart = {
+ .clk = {
+ .name = "uartclk",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
};
+
/* hsspi
*
* high-speed spi clock, sourced from esysclk
*/
-static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
- div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc4(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_hsspi = {
- .name = "hsspi",
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
- .enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_hsspi,
- .set_rate = s3c2443_setrate_hsspi,
- .round_rate = s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsspi = {
+ .clk = {
+ .name = "hsspi",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* usbhost
@@ -394,41 +325,15 @@
* usb host bus-clock, usually 48MHz to provide USB bus clock timing
*/
-static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
- div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc4(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_usb_bus_host = {
- .name = "usb-bus-host-parent",
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_USBHOST,
- .enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_usbhost,
- .set_rate = s3c2443_setrate_usbhost,
- .round_rate = s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_usb_bus_host = {
+ .clk = {
+ .name = "usb-bus-host-parent",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_USBHOST,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* clk_hsmcc_div
@@ -438,39 +343,13 @@
* be fed to the hsmmc block
*/
-static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
- div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc4(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_hsmmc_div = {
- .name = "hsmmc-div",
- .id = -1,
- .parent = &clk_esysclk,
- .get_rate = s3c2443_getrate_hsmmc_div,
- .set_rate = s3c2443_setrate_hsmmc_div,
- .round_rate = s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsmmc_div = {
+ .clk = {
+ .name = "hsmmc-div",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
};
static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
@@ -503,82 +382,55 @@
static struct clk clk_hsmmc = {
.name = "hsmmc-if",
.id = -1,
- .parent = &clk_hsmmc_div,
+ .parent = &clk_hsmmc_div.clk,
.enable = s3c2443_enable_hsmmc,
- .set_parent = s3c2443_setparent_hsmmc,
+ .ops = &(struct clk_ops) {
+ .set_parent = s3c2443_setparent_hsmmc,
+ },
};
/* i2s_eplldiv
*
- * this clock is the output from the i2s divisor of esysclk
+ * This clock is the output from the I2S divisor of ESYSCLK, and is seperate
+ * from the mux that comes after it (cannot merge into one single clock)
*/
-static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_I2SDIV_MASK;
- div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc16(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_i2s_eplldiv = {
- .name = "i2s-eplldiv",
- .id = -1,
- .parent = &clk_esysclk,
- .get_rate = s3c2443_getrate_i2s_eplldiv,
- .set_rate = s3c2443_setrate_i2s_eplldiv,
- .round_rate = s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_i2s_eplldiv = {
+ .clk = {
+ .name = "i2s-eplldiv",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
};
/* i2s-ref
*
* i2s bus reference clock, selectable from external, esysclk or epllref
+ *
+ * Note, this used to be two clocks, but was compressed into one.
*/
-static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+struct clk *clk_i2s_srclist[] = {
+ [0] = &clk_i2s_eplldiv.clk,
+ [1] = &clk_i2s_ext,
+ [2] = &clk_epllref.clk,
+ [3] = &clk_epllref.clk,
+};
- clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+static struct clksrc_clk clk_i2s = {
+ .clk = {
+ .name = "i2s-if",
+ .id = -1,
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
- if (parent == &clk_epllref)
- clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
- else if (parent == &clk_i2s_ext)
- clksrc |= S3C2443_CLKSRC_I2S_EXT;
- else if (parent != &clk_i2s_eplldiv)
- return -EINVAL;
-
- clk->parent = parent;
- __raw_writel(clksrc, S3C2443_CLKSRC);
-
- return 0;
-}
-
-static struct clk clk_i2s = {
- .name = "i2s-if",
- .id = -1,
- .parent = &clk_i2s_eplldiv,
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
- .set_parent = s3c2443_setparent_i2s,
+ },
+ .sources = &(struct clksrc_sources) {
+ .sources = clk_i2s_srclist,
+ .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
};
/* cam-if
@@ -586,41 +438,15 @@
* camera interface bus-clock, divided down from esysclk
*/
-static unsigned long s3c2443_getrate_cam(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_CAMDIV_MASK;
- div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc16(clk, rate);
- rate = parent_rate / rate;
-
- clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
- clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
- __raw_writel(clkdiv1, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_cam = {
- .name = "camif-upll", /* same as 2440 name */
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_CAMCLK,
- .enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_cam,
- .set_rate = s3c2443_setrate_cam,
- .round_rate = s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_cam = {
+ .clk = {
+ .name = "camif-upll", /* same as 2440 name */
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_CAMCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
};
/* display-if
@@ -628,41 +454,15 @@
* display interface clock, divided from esysclk
*/
-static unsigned long s3c2443_getrate_display(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
- div &= S3C2443_CLKDIV1_DISPDIV_MASK;
- div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
- rate = s3c2443_roundrate_clksrc256(clk, rate);
- rate = parent_rate / rate;
-
- clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
- clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2443_CLKDIV1);
- return 0;
-}
-
-static struct clk clk_display = {
- .name = "display-if",
- .id = -1,
- .parent = &clk_esysclk,
- .ctrlbit = S3C2443_SCLKCON_DISPCLK,
- .enable = s3c2443_clkcon_enable_s,
- .get_rate = s3c2443_getrate_display,
- .set_rate = s3c2443_setrate_display,
- .round_rate = s3c2443_roundrate_clksrc256,
+static struct clksrc_clk clk_display = {
+ .clk = {
+ .name = "display-if",
+ .id = -1,
+ .parent = &clk_esysclk.clk,
+ .ctrlbit = S3C2443_SCLKCON_DISPCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
};
/* prediv
@@ -684,8 +484,10 @@
static struct clk clk_prediv = {
.name = "prediv",
.id = -1,
- .parent = &clk_msysclk,
- .get_rate = s3c2443_prediv_getrate,
+ .parent = &clk_msysclk.clk,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2443_prediv_getrate,
+ },
};
/* standard clock definitions */
@@ -857,7 +659,7 @@
}, {
.name = "usb-bus-host",
.id = -1,
- .parent = &clk_usb_bus_host,
+ .parent = &clk_usb_bus_host.clk,
}, {
.name = "ac97",
.id = -1,
@@ -868,103 +670,26 @@
/* clocks to add where we need to check their parentage */
-/* s3c2443_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
-{
- printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
- return clk_set_parent(clk, parent);
-}
+static struct clksrc_clk __initdata *init_list[] = {
+ &clk_epllref, /* should be first */
+ &clk_esysclk,
+ &clk_msysclk,
+ &clk_arm,
+ &clk_i2s_eplldiv,
+ &clk_i2s,
+ &clk_cam,
+ &clk_uart,
+ &clk_display,
+ &clk_hsmmc_div,
+ &clk_usb_bus_host,
+};
static void __init s3c2443_clk_initparents(void)
{
- unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
- struct clk *parent;
+ int ptr;
- switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
- case S3C2443_CLKSRC_EPLLREF_EXTCLK:
- parent = &clk_ext;
- break;
-
- case S3C2443_CLKSRC_EPLLREF_XTAL:
- default:
- parent = &clk_xtal;
- break;
-
- case S3C2443_CLKSRC_EPLLREF_MPLLREF:
- case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
- parent = &clk_mpllref;
- break;
- }
-
- clk_init_set_parent(&clk_epllref, parent);
-
- switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
- case S3C2443_CLKSRC_I2S_EXT:
- parent = &clk_i2s_ext;
- break;
-
- case S3C2443_CLKSRC_I2S_EPLLDIV:
- default:
- parent = &clk_i2s_eplldiv;
- break;
-
- case S3C2443_CLKSRC_I2S_EPLLREF:
- case S3C2443_CLKSRC_I2S_EPLLREF3:
- parent = &clk_epllref;
- }
-
- clk_init_set_parent(&clk_i2s, &clk_epllref);
-
- /* esysclk source */
-
- parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
- &clk_epll : &clk_epllref;
-
- clk_init_set_parent(&clk_esysclk, parent);
-
- /* msysclk source */
-
- if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
- parent = &clk_mpll;
- } else {
- parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
- &clk_mdivclk : &clk_mpllref;
- }
-
- clk_init_set_parent(&clk_msysclk, parent);
-
- /* arm */
-
- if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
- parent = &clk_h;
- else
- parent = &clk_armdiv;
-
- clk_init_set_parent(&clk_arm, parent);
-}
-
-/* armdiv divisor table */
-
-static unsigned int armdiv[16] = {
- [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
- [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
- [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
- [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
- [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
- [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
- [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
- [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
-};
-
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
- clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
- return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+ for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
+ s3c_set_clksrc(init_list[ptr], true);
}
static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
@@ -976,15 +701,12 @@
/* clocks to add straight away */
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
+static struct clksrc_clk *clksrcs[] __initdata = {
&clk_usb_bus_host,
- &clk_usb_bus,
- &clk_esysclk,
&clk_epllref,
- &clk_mpllref,
+ &clk_esysclk,
&clk_msysclk,
+ &clk_arm,
&clk_uart,
&clk_display,
&clk_cam,
@@ -992,9 +714,15 @@
&clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_usb_bus,
+ &clk_mpllref,
&clk_hsmmc,
&clk_armdiv,
- &clk_arm,
&clk_prediv,
};
@@ -1014,7 +742,7 @@
clk_put(xtal_clk);
pll = s3c2443_get_mpll(mpllcon, xtal);
- clk_msysclk.rate = pll;
+ clk_msysclk.clk.rate = pll;
fclk = pll / s3c2443_fclk_div(clkdiv0);
hclk = s3c2443_prediv_getrate(&clk_prediv);
@@ -1056,15 +784,18 @@
}
}
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_register_clksrc(clksrcs[ptr], 1);
+
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
- clk_epll.parent = &clk_epllref;
- clk_usb_bus.parent = &clk_usb_bus_host;
+ clk_epll.parent = &clk_epllref.clk;
+ clk_usb_bus.parent = &clk_usb_bus_host.clk;
/* ensure usb bus clock is within correct rate of 48MHz */
- if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+ if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
- clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+ clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
}
printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
@@ -1074,14 +805,7 @@
/* register clocks from clock array */
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsystems such as the LCD which do
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 397f3b5..3f65868 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,7 +20,7 @@
#include <mach/dma.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a462..e2e362b 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -106,6 +106,9 @@
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_hsmmc0,
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+ &s3c_device_ac97,
+#endif
};
static void __init smdk2443_map_io(void)
@@ -118,6 +121,11 @@
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
+
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+ s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
+#endif
+
platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
smdk_machine_init();
}
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
similarity index 72%
rename from arch/arm/plat-s3c/include/mach/io.h
rename to arch/arm/mach-s3c24a0/include/mach/io.h
index f6a5363..4326c30 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c24a0/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c24a0/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C24A0
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
deleted file mode 100644
index a250bf6..0000000
--- a/arch/arm/mach-s3c6400/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
- bool
- select CPU_S3C6400_INIT
- select CPU_S3C6400_CLOCK
- help
- Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
- bool
- help
- Internal configuration for default SDHCI
- setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
- bool "SMDK6400"
- select CPU_S3C6400
- select S3C_DEV_HSMMC
- select S3C_DEV_NAND
- select S3C6400_SETUP_SDHCI
- help
- Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
deleted file mode 100644
index df1ce4a..0000000
--- a/arch/arm/mach-s3c6400/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
deleted file mode 100644
index 6723860..0000000
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS (16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
- /* DMA0/SDMA0 */
- DMACH_UART0 = 0,
- DMACH_UART0_SRC2,
- DMACH_UART1,
- DMACH_UART1_SRC2,
- DMACH_UART2,
- DMACH_UART2_SRC2,
- DMACH_UART3,
- DMACH_UART3_SRC2,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_OUT,
- DMACH_I2S0_IN,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_HSI_I2SV40_TX,
- DMACH_HSI_I2SV40_RX,
-
- /* DMA1/SDMA1 */
- DMACH_PCM1_TX = 16,
- DMACH_PCM1_RX,
- DMACH_I2S1_OUT,
- DMACH_I2S1_IN,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_AC97_PCMOUT,
- DMACH_AC97_PCMIN,
- DMACH_AC97_MICIN,
- DMACH_PWM,
- DMACH_IRDA,
- DMACH_EXTERNAL,
- DMACH_RES1,
- DMACH_RES2,
- DMACH_SECURITY_RX, /* SDMA1 only */
- DMACH_SECURITY_TX, /* SDMA1 only */
- DMACH_MAX /* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
- return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR (1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
deleted file mode 100644
index fbd90d2..0000000
--- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =S3C_VA_VIC0
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S3C_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
deleted file mode 100644
index d89aae6..0000000
--- a/arch/arm/mach-s3c6400/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
deleted file mode 100644
index 4c97f9a..0000000
--- a/arch/arm/mach-s3c6400/include/mach/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
deleted file mode 100644
index a6c7f4e..0000000
--- a/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - clock register compatibility with s3c24xx
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-clock.h>
-
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
deleted file mode 100644
index 162f456..0000000
--- a/arch/arm/mach-s3c6410/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6410
- bool
- select CPU_S3C6400_INIT
- select CPU_S3C6400_CLOCK
- help
- Enable S3C6410 CPU support
-
-config S3C6410_SETUP_SDHCI
- bool
- select S3C64XX_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S3C6410 based SDHCI systems
-
-config MACH_ANW6410
- bool "A&W6410"
- select CPU_S3C6410
- select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
- help
- Machine support for the A&W6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- select CPU_S3C6410
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_FB
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C6410_SETUP_SDHCI
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_FB_24BPP
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- select REGULATOR
- select REGULATOR_WM8350
- select S3C24XX_GPIO_EXTRA64
- select MFD_WM8350_I2C
- select MFD_WM8350_CONFIG_MODE_0
- select MFD_WM8350_CONFIG_MODE_3
- select MFD_WM8352_CONFIG_MODE_0
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- select CPU_S3C6410
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC1
- select S3C64XX_SETUP_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- select CPU_S3C6410
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_FB_24BPP
- select HAVE_PWM
- help
- Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
deleted file mode 100644
index 3e48c3d..0000000
--- a/arch/arm/mach-s3c6410/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410) += cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
deleted file mode 100644
index 816d2d9..0000000
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "mmc_bus",
- /* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything acording to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 0000000..959df38
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,180 @@
+# Copyright 2008 Openmoko, Inc.
+# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+ bool
+ depends on ARCH_S3C64XX
+ default y
+ help
+ Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+ bool
+ help
+ Enable S3C6400 CPU support
+
+config CPU_S3C6410
+ bool
+ help
+ Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+ bool "S3C64XX DMA"
+ select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Internal configuration for default SDHCI setup for S3C6400 and
+ S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+ bool "SMDK6400"
+ select CPU_S3C6400
+ select S3C_DEV_HSMMC
+ select S3C_DEV_NAND
+ select S3C64XX_SETUP_SDHCI
+ help
+ Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+ bool "A&W6410"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the A&W6410
+
+config MACH_SMDK6410
+ bool "SMDK6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
+ select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+ prompt "SMDK6410 MMC/SD slot setup"
+ depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+ bool "Use channel 0 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON7 (channel 0) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+ bool "Use channel 1 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON6 (channel 1) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+ bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM8350
+ select S3C24XX_GPIO_EXTRA64
+ select MFD_WM8350_I2C
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+ and audio daughtercard for the Samsung SMDK6410 reference
+ platform. Enabling this option will build support for this
+ module into the kernel. The presence of the module will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+ bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM831X
+ select S3C24XX_GPIO_EXTRA64
+ select MFD_WM831X
+ help
+ The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+ daughtercard for the Samsung SMDK6410 reference platform.
+ Enabling this option will build support for this module into
+ the kernel. The presence of the daughtercard will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+ bool "NCP"
+ select CPU_S3C6410
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_I2C1
+ help
+ Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select S3C64XX_SETUP_FB_24BPP
+ select HAVE_PWM
+ help
+ Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
new file mode 100644
index 0000000..3758e15
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core files
+obj-y += cpu.o
+obj-y += clock.o
+obj-y += gpiolib.o
+
+# Core support for S3C6400 system
+
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+
+obj-y += irq.o
+obj-y += irq-eint.o
+
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA) += dma.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
+# PM
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_PM) += irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+
+# device support
+
+obj-y += dev-uart.o
+obj-y += dev-rtc.o
+obj-y += dev-audio.o
+obj-$(CONFIG_S3C_ADC) += dev-adc.o
+obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
similarity index 100%
rename from arch/arm/mach-s3c6400/Makefile.boot
rename to arch/arm/mach-s3c64xx/Makefile.boot
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
new file mode 100644
index 0000000..2ac2e7d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -0,0 +1,809 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll clk_mpll
+#define clk_fout_epll clk_epll
+
+struct clk clk_h2 = {
+ .name = "hclk2",
+ .id = -1,
+ .rate = 0,
+};
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S3C64XX_OTHERS);
+ if (enable)
+ val |= S3C64XX_OTHERS_USBMASK;
+ else
+ val &= ~S3C64XX_OTHERS_USBMASK;
+
+ __raw_writel(val, S3C64XX_OTHERS);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+ struct clk *clk,
+ int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+ return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+ return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+ return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_TSADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIC,
+ }, {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS1,
+ }, {
+#ifdef CONFIG_CPU_S3C6410
+ .name = "iis",
+ .id = -1, /* There's only one IISv4 port */
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
+ }, {
+#endif
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_SPI1,
+ }, {
+ .name = "spi_48m",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
+ }, {
+ .name = "spi_48m",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
+ }, {
+ .name = "48m",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
+ }, {
+ .name = "48m",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
+ }, {
+ .name = "48m",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
+ }, {
+ .name = "dma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA0,
+ }, {
+ .name = "dma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA1,
+ },
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_LCD,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_UHOST,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_PWM,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART3,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C_CLKCON_PCLK_WDT,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C_CLKCON_PCLK_AC97,
+ }
+};
+
+
+static struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+static struct clksrc_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 },
+ .sources = &clk_src_apll,
+};
+
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+static struct clksrc_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 },
+ .sources = &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+static struct clksrc_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 },
+ .sources = &clk_src_mpll,
+};
+
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv;
+
+ /* divisor mask starts at bit0, so no need to shift */
+ clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+ return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+
+ if (parent < rate)
+ return parent;
+
+ div = (parent / rate) - 1;
+ if (div > armclk_mask)
+ div = armclk_mask;
+
+ return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+ u32 val;
+
+ if (rate < parent / (armclk_mask + 1))
+ return -EINVAL;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+
+ val = __raw_readl(S3C_CLK_DIV0);
+ val &= ~armclk_mask;
+ val |= (div - 1);
+ __raw_writel(val, S3C_CLK_DIV0);
+
+ return 0;
+
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c64xx_clk_arm_get_rate,
+ .set_rate = s3c64xx_clk_arm_set_rate,
+ .round_rate = s3c64xx_clk_arm_round_rate,
+ },
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+ rate /= 2;
+
+ return rate;
+}
+
+static struct clk_ops clk_dout_ops = {
+ .get_rate = s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .ops = &clk_dout_ops,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_27m,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+ .sources = clkset_spi_mmc_list,
+ .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ NULL,
+ &clk_27m,
+};
+
+static struct clksrc_sources clkset_irda = {
+ .sources = clkset_irda_list,
+ .nr_sources = ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ NULL,
+ NULL
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+ &clk_48m,
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_uhost = {
+ .sources = clkset_uhost_list,
+ .nr_sources = ARRAY_SIZE(clkset_uhost_list),
+};
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+/* clocks that feed other parts of the clock source tree */
+
+static struct clk clk_iis_cd0 = {
+ .name = "iis_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_iis_cd1 = {
+ .name = "iis_cdclk1",
+ .id = -1,
+};
+
+static struct clk clk_pcm_cd = {
+ .name = "pcm_cdclk",
+ .id = -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_dout_mpll,
+ [2] = &clk_fin_epll,
+ [3] = &clk_iis_cd0,
+ [4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio0 = {
+ .sources = clkset_audio0_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clk *clkset_audio1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_dout_mpll,
+ [2] = &clk_fin_epll,
+ [3] = &clk_iis_cd1,
+ [4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio1 = {
+ .sources = clkset_audio1_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clk *clkset_camif_list[] = {
+ &clk_h2,
+};
+
+static struct clksrc_sources clkset_camif = {
+ .sources = clkset_camif_list,
+ .nr_sources = ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
+ .sources = &clkset_spi_mmc,
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
+ .sources = &clkset_spi_mmc,
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
+ .sources = &clkset_spi_mmc,
+ }, {
+ .clk = {
+ .name = "usb-bus-host",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_UHOST,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 },
+ .sources = &clkset_uhost,
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_UART,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
+ .sources = &clkset_uart,
+ }, {
+/* Where does UCLK0 come from? */
+ .clk = {
+ .name = "spi-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
+ .sources = &clkset_spi_mmc,
+ }, {
+ .clk = {
+ .name = "spi-bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
+ .sources = &clkset_spi_mmc,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
+ .sources = &clkset_audio0,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
+ .sources = &clkset_audio1,
+ }, {
+ .clk = {
+ .name = "irda-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_IRDA,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 },
+ .sources = &clkset_irda,
+ }, {
+ .clk = {
+ .name = "camera",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_CAM,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 },
+ .reg_src = { .reg = NULL, .shift = 0, .size = 0 },
+ .sources = &clkset_camif,
+ },
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long hclk2;
+ unsigned long pclk;
+ unsigned long epll;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned int ptr;
+ u32 clkdiv0;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ /* For now assume the mux always selects the crystal */
+ clk_ext_xtal_mux.parent = xtal_clk;
+
+ epll = s3c6400_get_epll(xtal);
+ mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+ apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+ fclk = mpll;
+
+ printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+ apll, mpll, epll);
+
+ hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+ hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+ pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+ printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+ hclk2, hclk, pclk);
+
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_apll.rate = apll;
+
+ clk_h2.rate = hclk2;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+ clk_f.rate = fclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks1[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_iis_cd0,
+ &clk_iis_cd1,
+ &clk_pcm_cd,
+ &clk_mout_epll.clk,
+ &clk_mout_mpll.clk,
+ &clk_dout_mpll,
+ &clk_arm,
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_h2,
+};
+
+/**
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
+ *
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c64xx_register_clocks(unsigned long xtal,
+ unsigned armclk_divlimit)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ armclk_mask = armclk_divlimit;
+
+ s3c24xx_register_baseclocks(xtal);
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
similarity index 89%
rename from arch/arm/plat-s3c64xx/cpu.c
rename to arch/arm/mach-s3c64xx/cpu.c
index 49796d2..374e45e 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -33,8 +33,8 @@
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
/* table of supported CPUs */
@@ -73,17 +73,22 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
+ .virtual = (unsigned long)S3C_VA_MEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
.pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S3C_VA_VIC0,
+ .virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S3C_VA_VIC1,
+ .virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
@@ -124,6 +129,12 @@
.cls = &s3c64xx_sysclass,
};
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
/* read cpu identification code */
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/cpufreq.c
rename to arch/arm/mach-s3c64xx/cpufreq.c
diff --git a/arch/arm/mach-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
new file mode 100644
index 0000000..fafef9b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-adc.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_ADC,
+ .end = S3C64XX_PA_ADC + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_adc = {
+ .name = "s3c64xx-adc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_adc_resource),
+ .resource = s3c_adc_resource,
+};
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
new file mode 100644
index 0000000..c3e9e73
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -0,0 +1,335 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
+
+#include <plat/devs.h>
+#include <plat/audio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
+static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+ s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+ break;
+ case 1:
+ s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+ s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+ default:
+ printk(KERN_DEBUG "Invalid I2S Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+ s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+ s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+
+ return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_IIS0,
+ .end = S3C64XX_PA_IIS0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_OUT,
+ .end = DMACH_I2S0_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_IN,
+ .end = DMACH_I2S0_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s3c_i2s0_pdata = {
+ .cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+ .name = "s3c64xx-iis",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource),
+ .resource = s3c64xx_iis0_resource,
+ .dev = {
+ .platform_data = &s3c_i2s0_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_IIS1,
+ .end = S3C64XX_PA_IIS1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_OUT,
+ .end = DMACH_I2S1_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_IN,
+ .end = DMACH_I2S1_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s3c_i2s1_pdata = {
+ .cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+ .name = "s3c64xx-iis",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource),
+ .resource = s3c64xx_iis1_resource,
+ .dev = {
+ .platform_data = &s3c_i2s1_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_IISV4,
+ .end = S3C64XX_PA_IISV4 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_HSI_I2SV40_TX,
+ .end = DMACH_HSI_I2SV40_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_HSI_I2SV40_RX,
+ .end = DMACH_HSI_I2SV40_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s3c_i2sv4_pdata = {
+ .cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+ .name = "s3c64xx-iis-v4",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
+ .resource = s3c64xx_iisv4_resource,
+ .dev = {
+ .platform_data = &s3c_i2sv4_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+ s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+ s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+ break;
+ case 1:
+ s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+ s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+ s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+ break;
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_PCM0,
+ .end = S3C64XX_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+ .cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource),
+ .resource = s3c64xx_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm0_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_PCM1,
+ .end = S3C64XX_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+ .cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource),
+ .resource = s3c64xx_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm1_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
+ s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
+ s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
+ s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
+
+ return 0;
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
+ s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
+ s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
+ s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
+
+ return 0;
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_AC97,
+ .end = S3C64XX_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata;
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c64xx_ac97_resource),
+ .resource = s3c64xx_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s3c64xx_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+ if (num == S3C64XX_AC97_GPD)
+ s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+ else
+ s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
new file mode 100644
index 0000000..b9e7a05
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-rtc.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_RTC,
+ .end = S3C64XX_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC_ALARM,
+ .end = IRQ_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTC_TIC,
+ .end = IRQ_RTC_TIC,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device s3c_device_rtc = {
+ .name = "s3c64xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
new file mode 100644
index 0000000..29c32d0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s3c64xx/dev-spi.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+ [S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
+ [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
+ [S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
+ s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
+ s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
+ s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+ break;
+
+ case 1:
+ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
+ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
+ s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
+ s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+ break;
+
+ default:
+ dev_err(&pdev->dev, "Invalid SPI Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct resource s3c64xx_spi0_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_SPI0,
+ .end = S3C64XX_PA_SPI0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPI0_TX,
+ .end = DMACH_SPI0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_SPI0_RX,
+ .end = DMACH_SPI0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = IRQ_SPI0,
+ .end = IRQ_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+ .cfg_gpio = s3c64xx_spi_cfg_gpio,
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_spi0 = {
+ .name = "s3c64xx-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
+ .resource = s3c64xx_spi0_resource,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c64xx_spi0_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_spi0);
+
+static struct resource s3c64xx_spi1_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_SPI1,
+ .end = S3C64XX_PA_SPI1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPI1_TX,
+ .end = DMACH_SPI1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_SPI1_RX,
+ .end = DMACH_SPI1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = IRQ_SPI1,
+ .end = IRQ_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+ .cfg_gpio = s3c64xx_spi_cfg_gpio,
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+ .name = "s3c64xx-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
+ .resource = s3c64xx_spi1_resource,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s3c64xx_spi1_pdata,
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_spi1);
+
+void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+ struct s3c64xx_spi_info *pd;
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0
+ || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
+ printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ switch (cntrlr) {
+ case 0:
+ pd = &s3c64xx_spi0_pdata;
+ break;
+ case 1:
+ pd = &s3c64xx_spi1_pdata;
+ break;
+ default:
+ printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+ __func__, cntrlr);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
similarity index 85%
rename from arch/arm/plat-s3c64xx/dev-uart.c
rename to arch/arm/mach-s3c64xx/dev-uart.c
index 62c11a6..f797f74 100644
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -145,32 +145,3 @@
.nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/dma.c
rename to arch/arm/mach-s3c64xx/dma.c
index d554b93..b62bdf1 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -27,8 +27,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
#include <asm/hardware/pl080.h>
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
new file mode 100644
index 0000000..66e6794
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -0,0 +1,288 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 8 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 5 4Bit Yes 3
+ * E 5 4Bit Yes None
+ * F 16 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 16 4Bit[2] No None
+ * L 15 4Bit[2] No None
+ * M 6 4Bit No IRQ_EINT
+ * N 16 2Bit No IRQ_EINT
+ * O 16 2Bit Yes 7
+ * P 15 2Bit Yes 8
+ * Q 9 2Bit Yes 9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+ .cfg_eint = 7,
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+ .cfg_eint = 3,
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+ return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+ {
+ .base = S3C64XX_GPA_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPA(0),
+ .ngpio = S3C64XX_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .base = S3C64XX_GPB_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPB(0),
+ .ngpio = S3C64XX_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S3C64XX_GPC_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPC(0),
+ .ngpio = S3C64XX_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S3C64XX_GPD_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPD(0),
+ .ngpio = S3C64XX_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S3C64XX_GPE_BASE,
+ .config = &gpio_4bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPE(0),
+ .ngpio = S3C64XX_GPIO_E_NR,
+ .label = "GPE",
+ },
+ }, {
+ .base = S3C64XX_GPG_BASE,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPG(0),
+ .ngpio = S3C64XX_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S3C64XX_GPM_BASE,
+ .config = &gpio_4bit_cfg_eint0011,
+ .chip = {
+ .base = S3C64XX_GPM(0),
+ .ngpio = S3C64XX_GPIO_M_NR,
+ .label = "GPM",
+ .to_irq = s3c64xx_gpio2int_gpm,
+ },
+ },
+};
+
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+ return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+ {
+ .base = S3C64XX_GPH_BASE + 0x4,
+ .config = &gpio_4bit_cfg_eint0111,
+ .chip = {
+ .base = S3C64XX_GPH(0),
+ .ngpio = S3C64XX_GPIO_H_NR,
+ .label = "GPH",
+ },
+ }, {
+ .base = S3C64XX_GPK_BASE + 0x4,
+ .config = &gpio_4bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPK(0),
+ .ngpio = S3C64XX_GPIO_K_NR,
+ .label = "GPK",
+ },
+ }, {
+ .base = S3C64XX_GPL_BASE + 0x4,
+ .config = &gpio_4bit_cfg_eint0011,
+ .chip = {
+ .base = S3C64XX_GPL(0),
+ .ngpio = S3C64XX_GPIO_L_NR,
+ .label = "GPL",
+ .to_irq = s3c64xx_gpio2int_gpl,
+ },
+ },
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+ .cfg_eint = 2,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+ .cfg_eint = 3,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
+{
+ return IRQ_EINT(0) + pin;
+}
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+ {
+ .base = S3C64XX_GPF_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPF(0),
+ .ngpio = S3C64XX_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S3C64XX_GPI_BASE,
+ .config = &gpio_2bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPI(0),
+ .ngpio = S3C64XX_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S3C64XX_GPJ_BASE,
+ .config = &gpio_2bit_cfg_noint,
+ .chip = {
+ .base = S3C64XX_GPJ(0),
+ .ngpio = S3C64XX_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S3C64XX_GPN_BASE,
+ .config = &gpio_2bit_cfg_eint10,
+ .chip = {
+ .base = S3C64XX_GPN(0),
+ .ngpio = S3C64XX_GPIO_N_NR,
+ .label = "GPN",
+ .to_irq = s3c64xx_gpio2int_gpn,
+ },
+ }, {
+ .base = S3C64XX_GPO_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPO(0),
+ .ngpio = S3C64XX_GPIO_O_NR,
+ .label = "GPO",
+ },
+ }, {
+ .base = S3C64XX_GPP_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPP(0),
+ .ngpio = S3C64XX_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .base = S3C64XX_GPQ_BASE,
+ .config = &gpio_2bit_cfg_eint11,
+ .chip = {
+ .base = S3C64XX_GPQ(0),
+ .ngpio = S3C64XX_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ },
+};
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+ chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+ int nr_chips,
+ void (*fn)(struct s3c_gpio_chip *))
+{
+ for (; nr_chips > 0; nr_chips--, chips++) {
+ if (fn)
+ (fn)(chips);
+ s3c_gpiolib_add(chips);
+ }
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+ s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+ samsung_gpiolib_add_4bit);
+
+ s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+ samsung_gpiolib_add_4bit2);
+
+ s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+ s3c64xx_gpiolib_add_2bit);
+
+ return 0;
+}
+
+core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
similarity index 97%
rename from arch/arm/mach-s3c6400/include/mach/debug-macro.S
rename to arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index 5c88875..b18ac52 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, tmp
+ .macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 0000000..0a5d926
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS (16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+ /* DMA0/SDMA0 */
+ DMACH_UART0 = 0,
+ DMACH_UART0_SRC2,
+ DMACH_UART1,
+ DMACH_UART1_SRC2,
+ DMACH_UART2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3,
+ DMACH_UART3_SRC2,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_OUT,
+ DMACH_I2S0_IN,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_HSI_I2SV40_TX,
+ DMACH_HSI_I2SV40_RX,
+
+ /* DMA1/SDMA1 */
+ DMACH_PCM1_TX = 16,
+ DMACH_PCM1_RX,
+ DMACH_I2S1_OUT,
+ DMACH_I2S1_IN,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_AC97_PCMOUT,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_MICIN,
+ DMACH_PWM,
+ DMACH_IRDA,
+ DMACH_EXTERNAL,
+ DMACH_RES1,
+ DMACH_RES2,
+ DMACH_SECURITY_RX, /* SDMA1 only */
+ DMACH_SECURITY_TX, /* SDMA1 only */
+ DMACH_MAX /* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+ return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR (1 << 0)
+
+#include <plat/dma.h>
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+ struct s3c64xx_dma_buff *next;
+
+ void *pw;
+ struct pl080s_lli *lli;
+ dma_addr_t lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+ unsigned char number; /* number of this dma channel */
+ unsigned char in_use; /* channel allocated */
+ unsigned char bit; /* bit for enable/disable/etc */
+ unsigned char hw_width;
+ unsigned char peripheral;
+
+ unsigned int flags;
+ enum s3c2410_dmasrc source;
+
+
+ dma_addr_t dev_addr;
+
+ struct s3c2410_dma_client *client;
+ struct s3c64xx_dmac *dmac; /* pointer to controller */
+
+ void __iomem *regs;
+
+ /* cdriver callbacks */
+ s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
+ s3c2410_dma_opfn_t op_fn; /* channel op callback */
+
+ /* buffer list and information */
+ struct s3c64xx_dma_buff *curr; /* current dma buffer */
+ struct s3c64xx_dma_buff *next; /* next buffer to load */
+ struct s3c64xx_dma_buff *end; /* end of queue */
+
+ /* note, when channel is running in circular mode, curr is the
+ * first buffer enqueued, end is the last and curr is where the
+ * last buffer-done event is set-at. The buffers are not freed
+ * and the last buffer hardware descriptor points back to the
+ * first.
+ */
+};
+
+#include <plat/dma-core.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..dd36260
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
index 9aa0e42..34212e1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
index 3933adb..7232c03 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
index e22b49f..db189ab1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
index 6fe4a49..1a01cee 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
index 7fcf3d8..f057adb 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
index f3faff9..62ab8f5 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
index 35bbd23..b94954a 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
index 2ba1767..5d75aaa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
index ce9ebe3..4ceaa60 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
index 21a9062..6f25cd0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
index 569e761..d0aeda1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
index b09e129..21868fa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
index 92f0051..46bcfb6 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
index 565e60a..1712223 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
similarity index 95%
rename from arch/arm/mach-s3c6400/include/mach/gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio.h
index e8e35e8..0d46e99 100644
--- a/arch/arm/mach-s3c6400/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -91,6 +91,10 @@
#define S3C_GPIO_END S3C64XX_GPIO_END
/* define the number of gpios we need to the one after the GPQ() range */
-#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#define BOARD_NR_GPIOS 16
+
+#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/hardware.h
rename to arch/arm/mach-s3c64xx/include/mach/hardware.h
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s3c64xx/include/mach/io.h
index f6a5363..de5716db 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c64xx/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c64xxinclude/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C64XX based
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
similarity index 93%
rename from arch/arm/plat-s3c64xx/include/plat/irqs.h
rename to arch/arm/mach-s3c64xx/include/mach/irqs.h
index 7956fd3..e9ab4ac 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -1,15 +1,15 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * S3C64XX - Common IRQ support
+ * S3C64XX - IRQ support
*/
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
@@ -24,8 +24,8 @@
#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-#define S3C_VIC0_BASE S3C_IRQ(0)
-#define S3C_VIC1_BASE S3C_IRQ(32)
+#define IRQ_VIC0_BASE S3C_IRQ(0)
+#define IRQ_VIC1_BASE S3C_IRQ(32)
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
@@ -59,8 +59,8 @@
/* VIC based IRQs */
-#define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
+#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
/* VIC0 */
@@ -198,7 +198,13 @@
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#elif defined(CONFIG_SMDK6410_WM1192_EV1)
+#define IRQ_BOARD_NR 64
+#else
#define IRQ_BOARD_NR 16
+#endif
#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
@@ -206,5 +212,5 @@
#define NR_IRQS (IRQ_BOARD_END + 1)
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
similarity index 81%
rename from arch/arm/mach-s3c6400/include/mach/map.h
rename to arch/arm/mach-s3c64xx/include/mach/map.h
index 106ee13..801c1c0 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -17,6 +17,18 @@
#include <plat/map-base.h>
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
/* HSMMC units */
#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
@@ -38,16 +50,22 @@
#define S3C_VA_UART2 S3C_VA_UARTx(2)
#define S3C_VA_UART3 S3C_VA_UARTx(3)
+#define S3C64XX_PA_SROM (0x70000000)
+
#define S3C64XX_PA_NAND (0x70200000)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
+#define S3C64XX_PA_RTC (0x7E005000)
+#define S3C64XX_PA_ADC (0x7E00B000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_AC97 (0x7F001000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_SPI0 (0x7F00B000)
+#define S3C64XX_PA_SPI1 (0x7F00C000)
#define S3C64XX_PA_PCM0 (0x7F009000)
#define S3C64XX_PA_PCM1 (0x7F00A000)
#define S3C64XX_PA_IISV4 (0x7F00D000)
@@ -70,8 +88,8 @@
#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
/* place VICs close together */
-#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
+#define VA_VIC0 (S3C_VA_IRQ + 0x00)
+#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/memory.h
rename to arch/arm/mach-s3c64xx/include/mach/memory.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/pll.h
rename to arch/arm/mach-s3c64xx/include/mach/pll.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/pm-core.h
rename to arch/arm/mach-s3c64xx/include/mach/pm-core.h
index d347de3..1e9f20f 100644
--- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/pwm-clock.h
rename to arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
similarity index 66%
rename from arch/arm/plat-s3c64xx/include/plat/regs-clock.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index ff46e7f..3ef6274 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -35,14 +35,6 @@
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
/* CLKDIV0 */
-#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28)
-#define S3C6400_CLKDIV0_MFC_SHIFT (28)
-#define S3C6400_CLKDIV0_JPEG_MASK (0xf << 24)
-#define S3C6400_CLKDIV0_JPEG_SHIFT (24)
-#define S3C6400_CLKDIV0_CAM_MASK (0xf << 20)
-#define S3C6400_CLKDIV0_CAM_SHIFT (20)
-#define S3C6400_CLKDIV0_SECURITY_MASK (0x3 << 18)
-#define S3C6400_CLKDIV0_SECURITY_SHIFT (18)
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
#define S3C6400_CLKDIV0_PCLK_SHIFT (12)
#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9)
@@ -51,42 +43,11 @@
#define S3C6400_CLKDIV0_HCLK_SHIFT (8)
#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4)
#define S3C6400_CLKDIV0_MPLL_SHIFT (4)
+
#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0)
#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0)
#define S3C6400_CLKDIV0_ARM_SHIFT (0)
-/* CLKDIV1 */
-#define S3C6410_CLKDIV1_FIMC_MASK (0xf << 24)
-#define S3C6410_CLKDIV1_FIMC_SHIFT (24)
-#define S3C6400_CLKDIV1_UHOST_MASK (0xf << 20)
-#define S3C6400_CLKDIV1_UHOST_SHIFT (20)
-#define S3C6400_CLKDIV1_SCALER_MASK (0xf << 16)
-#define S3C6400_CLKDIV1_SCALER_SHIFT (16)
-#define S3C6400_CLKDIV1_LCD_MASK (0xf << 12)
-#define S3C6400_CLKDIV1_LCD_SHIFT (12)
-#define S3C6400_CLKDIV1_MMC2_MASK (0xf << 8)
-#define S3C6400_CLKDIV1_MMC2_SHIFT (8)
-#define S3C6400_CLKDIV1_MMC1_MASK (0xf << 4)
-#define S3C6400_CLKDIV1_MMC1_SHIFT (4)
-#define S3C6400_CLKDIV1_MMC0_MASK (0xf << 0)
-#define S3C6400_CLKDIV1_MMC0_SHIFT (0)
-
-/* CLKDIV2 */
-#define S3C6410_CLKDIV2_AUDIO2_MASK (0xf << 24)
-#define S3C6410_CLKDIV2_AUDIO2_SHIFT (24)
-#define S3C6400_CLKDIV2_IRDA_MASK (0xf << 20)
-#define S3C6400_CLKDIV2_IRDA_SHIFT (20)
-#define S3C6400_CLKDIV2_UART_MASK (0xf << 16)
-#define S3C6400_CLKDIV2_UART_SHIFT (16)
-#define S3C6400_CLKDIV2_AUDIO1_MASK (0xf << 12)
-#define S3C6400_CLKDIV2_AUDIO1_SHIFT (12)
-#define S3C6400_CLKDIV2_AUDIO0_MASK (0xf << 8)
-#define S3C6400_CLKDIV2_AUDIO0_SHIFT (8)
-#define S3C6400_CLKDIV2_SPI1_MASK (0xf << 4)
-#define S3C6400_CLKDIV2_SPI1_SHIFT (4)
-#define S3C6400_CLKDIV2_SPI0_MASK (0xf << 0)
-#define S3C6400_CLKDIV2_SPI0_SHIFT (0)
-
/* HCLK GATE Registers */
#define S3C_CLKCON_HCLK_3DSE (1<<31)
#define S3C_CLKCON_HCLK_UHOST (1<<29)
@@ -192,34 +153,4 @@
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
-#define S3C6410_CLKSRC_TV27_MASK (0x1 << 31)
-#define S3C6410_CLKSRC_TV27_SHIFT (31)
-#define S3C6410_CLKSRC_DAC27_MASK (0x1 << 30)
-#define S3C6410_CLKSRC_DAC27_SHIFT (30)
-#define S3C6400_CLKSRC_SCALER_MASK (0x3 << 28)
-#define S3C6400_CLKSRC_SCALER_SHIFT (28)
-#define S3C6400_CLKSRC_LCD_MASK (0x3 << 26)
-#define S3C6400_CLKSRC_LCD_SHIFT (26)
-#define S3C6400_CLKSRC_IRDA_MASK (0x3 << 24)
-#define S3C6400_CLKSRC_IRDA_SHIFT (24)
-#define S3C6400_CLKSRC_MMC2_MASK (0x3 << 22)
-#define S3C6400_CLKSRC_MMC2_SHIFT (22)
-#define S3C6400_CLKSRC_MMC1_MASK (0x3 << 20)
-#define S3C6400_CLKSRC_MMC1_SHIFT (20)
-#define S3C6400_CLKSRC_MMC0_MASK (0x3 << 18)
-#define S3C6400_CLKSRC_MMC0_SHIFT (18)
-#define S3C6400_CLKSRC_SPI1_MASK (0x3 << 16)
-#define S3C6400_CLKSRC_SPI1_SHIFT (16)
-#define S3C6400_CLKSRC_SPI0_MASK (0x3 << 14)
-#define S3C6400_CLKSRC_SPI0_SHIFT (14)
-#define S3C6400_CLKSRC_UART_MASK (0x1 << 13)
-#define S3C6400_CLKSRC_UART_SHIFT (13)
-#define S3C6400_CLKSRC_AUDIO1_MASK (0x7 << 10)
-#define S3C6400_CLKSRC_AUDIO1_SHIFT (10)
-#define S3C6400_CLKSRC_AUDIO0_MASK (0x7 << 7)
-#define S3C6400_CLKSRC_AUDIO0_SHIFT (7)
-#define S3C6400_CLKSRC_UHOST_MASK (0x3 << 5)
-#define S3C6400_CLKSRC_UHOST_SHIFT (5)
-
-
#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/regs-fb.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-fb.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/regs-irq.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-irq.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-modem.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-modem.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
new file mode 100644
index 0000000..756731b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
+ *
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SROM_H
+#define __PLAT_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT 0
+#define S3C64XX_SROM_BW__NCS1__SHIFT 4
+#define S3C64XX_SROM_BW__NCS2__SHIFT 8
+#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT 0
+#define S3C64XX_SROM_BCX__PMC__MASK 3
+#define S3C64XX_SROM_BCX__TACP__SHIFT 4
+#define S3C64XX_SROM_BCX__TACP__MASK 0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT 8
+#define S3C64XX_SROM_BCX__TCAH__MASK 0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT 12
+#define S3C64XX_SROM_BCX__TCOH__MASK 0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT 16
+#define S3C64XX_SROM_BCX__TACC__MASK 0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT 24
+#define S3C64XX_SROM_BCX__TCOS__MASK 0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT 28
+#define S3C64XX_SROM_BCX__TACS__MASK 0xf
+
+#endif /* _PLAT_REGS_SROM_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-sys.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-sys.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
similarity index 87%
rename from arch/arm/plat-s3c64xx/include/plat/s3c6400.h
rename to arch/arm/mach-s3c64xx/include/mach/s3c6400.h
index 11f2e1e..f86958d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -15,9 +15,10 @@
/* Common init code for S3C6400 related SoCs */
extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(unsigned armclk_divlimit);
extern void s3c6400_setup_clocks(void);
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
@@ -33,4 +34,3 @@
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
similarity index 93%
rename from arch/arm/plat-s3c64xx/include/plat/s3c6410.h
rename to arch/arm/mach-s3c64xx/include/mach/s3c6410.h
index 50dcdd6..24f1141 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
new file mode 100644
index 0000000..9d0c43b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_CLKS_H
+#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
+
+#define S3C64XX_SPI_SRCCLK_PCLK 0
+#define S3C64XX_SPI_SRCCLK_SPIBUS 1
+#define S3C64XX_SPI_SRCCLK_48M 2
+
+#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/system.h
rename to arch/arm/mach-s3c64xx/include/mach/system.h
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
similarity index 93%
rename from arch/arm/mach-s3c6400/include/mach/tick.h
rename to arch/arm/mach-s3c64xx/include/mach/tick.h
index d9c0dc7..ebe18a9 100644
--- a/arch/arm/mach-s3c6400/include/mach/tick.h
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -20,7 +20,7 @@
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
- u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
}
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s3c64xx/include/mach/timex.h
index 2a425ed..fb2e8cd 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c64xx/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/uncompress.h
rename to arch/arm/mach-s3c64xx/include/mach/uncompress.h
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
similarity index 80%
copy from arch/arm/plat-s3c/include/mach/vmalloc.h
copy to arch/arm/mach-s3c64xx/include/mach/vmalloc.h
index 299d95f..7411ef3 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
@@ -9,12 +9,12 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * S3C2410 vmalloc definition
+ * S3C6400 vmalloc definition
*/
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xe0000000UL)
+#define VMALLOC_END (0xE0000000)
#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/irq-eint.c
rename to arch/arm/mach-s3c64xx/irq-eint.c
index ebdf183..5682d6a 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -22,7 +22,7 @@
#include <asm/hardware/vic.h>
#include <plat/regs-irqtype.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <plat/gpio-cfg.h>
#include <mach/map.h>
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
similarity index 98%
rename from arch/arm/plat-s3c64xx/irq-pm.c
rename to arch/arm/mach-s3c64xx/irq-pm.c
index ca523b5..da1bec6 100644
--- a/arch/arm/plat-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -23,7 +23,7 @@
#include <plat/regs-serial.h>
#include <plat/regs-timer.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
new file mode 100644
index 0000000..67a145d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -0,0 +1,69 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+#include <plat/cpu.h>
+
+static struct s3c_uart_irq uart_irqs[] = {
+ [0] = {
+ .regs = S3C_VA_UART0,
+ .base_irq = IRQ_S3CUART_BASE0,
+ .parent_irq = IRQ_UART0,
+ },
+ [1] = {
+ .regs = S3C_VA_UART1,
+ .base_irq = IRQ_S3CUART_BASE1,
+ .parent_irq = IRQ_UART1,
+ },
+ [2] = {
+ .regs = S3C_VA_UART2,
+ .base_irq = IRQ_S3CUART_BASE2,
+ .parent_irq = IRQ_UART2,
+ },
+ [3] = {
+ .regs = S3C_VA_UART3,
+ .base_irq = IRQ_S3CUART_BASE3,
+ .parent_irq = IRQ_UART3,
+ },
+};
+
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+
+ /* add the timer sub-irqs */
+
+ s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+ s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+ s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+ s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+ s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+ s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
similarity index 97%
rename from arch/arm/mach-s3c6410/mach-anw6410.c
rename to arch/arm/mach-s3c64xx/mach-anw6410.c
index 661cca6..4a0bb24 100644
--- a/arch/arm/mach-s3c6410/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -45,12 +45,12 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
similarity index 99%
rename from arch/arm/mach-s3c6410/mach-hmt.c
rename to arch/arm/mach-s3c64xx/mach-hmt.c
index 7619456..187441a 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,7 +38,7 @@
#include <plat/fb.h>
#include <plat/nand.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -233,7 +233,7 @@
&s3c_device_i2c0,
&s3c_device_nand,
&s3c_device_fb,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_timer[1],
&hmt_backlight_device,
&hmt_leds_device,
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
similarity index 96%
rename from arch/arm/mach-s3c6410/mach-ncp.c
rename to arch/arm/mach-s3c64xx/mach-ncp.c
index 55e9bbf..bf65747 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
*
* Copyright (C) 2008-2009 Samsung Electronics
*
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
similarity index 96%
rename from arch/arm/mach-s3c6400/mach-smdk6400.c
rename to arch/arm/mach-s3c64xx/mach-smdk6400.c
index ab19285..f7b1898 100644
--- a/arch/arm/mach-s3c6400/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -31,7 +31,7 @@
#include <plat/regs-serial.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
similarity index 62%
rename from arch/arm/mach-s3c6410/mach-smdk6410.c
rename to arch/arm/mach-s3c64xx/mach-smdk6410.c
index 8969fe7..2d5afd2 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -32,6 +33,11 @@
#include <linux/mfd/wm8350/pmic.h>
#endif
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
@@ -46,14 +52,15 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/regs-modem.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-srom.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -154,10 +161,20 @@
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ * 1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ * 2) CFG6 needs to be switched to "LAN9115" side
+ */
+
static struct resource smdk6410_smsc911x_resources[] = {
[0] = {
- .start = 0x18000000,
- .end = 0x18000000 + SZ_64K - 1,
+ .start = S3C64XX_PA_XM0CSN1,
+ .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -235,8 +252,9 @@
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
- &s3c_device_usb,
+ &s3c_device_ohci,
&s3c_device_usb_hsotg,
+ &s3c64xx_device_iisv4,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
@@ -246,6 +264,119 @@
&smdk6410_smsc911x,
};
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+ {
+ .supply = "vddarm",
+ }
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data smdk6410_vddarm = {
+ .constraints = {
+ .name = "PVDD_ARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+ .consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data smdk6410_vddint = {
+ .constraints = {
+ .name = "PVDD_INT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+};
+
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data smdk6410_vddhi = {
+ .constraints = {
+ .name = "PVDD_HI",
+ .always_on = 1,
+ },
+};
+
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data smdk6410_vddpll = {
+ .constraints = {
+ .name = "PVDD_PLL",
+ .always_on = 1,
+ },
+};
+
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data smdk6410_vdduh_mmc = {
+ .constraints = {
+ .name = "PVDD_UH/PVDD_MMC",
+ .always_on = 1,
+ },
+};
+
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data smdk6410_vccmc3bt = {
+ .constraints = {
+ .name = "PVCCM3BT",
+ .always_on = 1,
+ },
+};
+
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data smdk6410_vccm2mtv = {
+ .constraints = {
+ .name = "PVCCM2MTV",
+ .always_on = 1,
+ },
+};
+
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data smdk6410_vddlcd = {
+ .constraints = {
+ .name = "PVDD_LCD",
+ .always_on = 1,
+ },
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data smdk6410_vddotgi = {
+ .constraints = {
+ .name = "PVDD_OTGI",
+ .always_on = 1,
+ },
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data smdk6410_vddotg = {
+ .constraints = {
+ .name = "PVDD_OTG",
+ .always_on = 1,
+ },
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data smdk6410_vddalive = {
+ .constraints = {
+ .name = "PVDD_ALIVE",
+ .always_on = 1,
+ },
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data smdk6410_vddaudio = {
+ .constraints = {
+ .name = "PVDD_AUDIO",
+ .always_on = 1,
+ },
+};
+#endif
+
#ifdef CONFIG_SMDK6410_WM1190_EV1
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
@@ -269,7 +400,7 @@
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
- },
+ },
.initial_state = PM_SUSPEND_MEM,
},
};
@@ -294,56 +425,6 @@
.consumer_supplies = wm8350_dcdc4_consumers,
};
-/* ARM core */
-static struct regulator_consumer_supply dcdc6_consumers[] = {
- {
- .supply = "vddarm",
- }
-};
-
-static struct regulator_init_data wm8350_dcdc6_data = {
- .constraints = {
- .name = "PVDD_ARM",
- .min_uV = 1000000,
- .max_uV = 1300000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
- .consumer_supplies = dcdc6_consumers,
-};
-
-/* Alive */
-static struct regulator_init_data wm8350_ldo1_data = {
- .constraints = {
- .name = "PVDD_ALIVE",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .always_on = 1,
- .apply_uV = 1,
- },
-};
-
-/* OTG */
-static struct regulator_init_data wm8350_ldo2_data = {
- .constraints = {
- .name = "PVDD_OTG",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .always_on = 1,
- },
-};
-
-/* LCD */
-static struct regulator_init_data wm8350_ldo3_data = {
- .constraints = {
- .name = "PVDD_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .always_on = 1,
- },
-};
-
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
@@ -362,10 +443,10 @@
{ WM8350_DCDC_1, &wm8350_dcdc1_data },
{ WM8350_DCDC_3, &wm8350_dcdc3_data },
{ WM8350_DCDC_4, &wm8350_dcdc4_data },
- { WM8350_DCDC_6, &wm8350_dcdc6_data },
- { WM8350_LDO_1, &wm8350_ldo1_data },
- { WM8350_LDO_2, &wm8350_ldo2_data },
- { WM8350_LDO_3, &wm8350_ldo3_data },
+ { WM8350_DCDC_6, &smdk6410_vddarm },
+ { WM8350_LDO_1, &smdk6410_vddalive },
+ { WM8350_LDO_2, &smdk6410_vddotg },
+ { WM8350_LDO_3, &smdk6410_vddlcd },
{ WM8350_LDO_4, &wm8350_ldo4_data },
};
@@ -388,6 +469,107 @@
static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
.init = smdk6410_wm8350_init,
.irq_high = 1,
+ .irq_base = IRQ_BOARD_START,
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+ {
+ .name = "PMIC:red:power",
+ .gpio = GPIO_BOARD_START + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+ .num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+ .leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wm1192_pmic_led,
+ },
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+ int ret;
+
+ /* Configure the IRQ line */
+ s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+ ret = platform_device_register(&wm1192_pmic_led_dev);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+ return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+ .isink = 1,
+ .max_uA = 27554,
+};
+
+static struct regulator_init_data wm1192_dcdc3 = {
+ .constraints = {
+ .name = "PVDD_MEM/PVDD_GPS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+ { .supply = "DVDD", .dev_name = "0-001b", }, /* WM8580 */
+};
+
+static struct regulator_init_data wm1192_ldo1 = {
+ .constraints = {
+ .name = "PVDD_LCD/PVDD_EXT",
+ .always_on = 1,
+ },
+ .consumer_supplies = wm1192_ldo1_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+ .name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+ .name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+ .pre_init = wm1192_pre_init,
+ .irq_base = IRQ_BOARD_START,
+
+ .backlight = &wm1192_backlight_pdata,
+ .dcdc = {
+ &smdk6410_vddarm, /* DCDC1 */
+ &smdk6410_vddint, /* DCDC2 */
+ &wm1192_dcdc3,
+ },
+ .gpio_base = GPIO_BOARD_START,
+ .ldo = {
+ &wm1192_ldo1, /* LDO1 */
+ &smdk6410_vdduh_mmc, /* LDO2 */
+ NULL, /* LDO3 NC */
+ &smdk6410_vddotgi, /* LDO4 */
+ &smdk6410_vddotg, /* LDO5 */
+ &smdk6410_vddhi, /* LDO6 */
+ &smdk6410_vddaudio, /* LDO7 */
+ &smdk6410_vccm2mtv, /* LDO8 */
+ &smdk6410_vddpll, /* LDO9 */
+ &smdk6410_vccmc3bt, /* LDO10 */
+ &smdk6410_vddalive, /* LDO11 */
+ },
+ .status = {
+ &wm1192_led7_pdata,
+ &wm1192_led8_pdata,
+ },
};
#endif
@@ -395,6 +577,13 @@
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &smdk6410_wm1192_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
+
#ifdef CONFIG_SMDK6410_WM1190_EV1
{ I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &smdk6410_wm8350_pdata,
@@ -430,10 +619,32 @@
static void __init smdk6410_machine_init(void)
{
+ u32 cs1;
+
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
gpio_request(S3C64XX_GPF(15), "LCD power");
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
similarity index 95%
rename from arch/arm/plat-s3c64xx/pm.c
rename to arch/arm/mach-s3c64xx/pm.c
index 47632fc..b8ac459 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -20,14 +20,14 @@
#include <mach/map.h>
#include <plat/pm.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-clock.h>
-#include <plat/regs-syscon-power.h>
-#include <plat/regs-gpio-memport.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-syscon-power.h>
+#include <mach/regs-gpio-memport.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <plat/gpio-bank-n.h>
+#include <mach/gpio-bank-n.h>
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
similarity index 86%
rename from arch/arm/mach-s3c6400/s3c6400.c
rename to arch/arm/mach-s3c64xx/s3c6400.c
index d876ee5..707e34e 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/cpu.c
*
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -30,14 +30,14 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
void __init s3c6400_map_io(void)
{
@@ -55,10 +55,7 @@
void __init s3c6400_init_clocks(int xtal)
{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c24xx_register_baseclocks(xtal);
- s3c64xx_register_clocks();
- s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+ s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c64xx/s3c6410.c
similarity index 80%
rename from arch/arm/mach-s3c6410/cpu.c
rename to arch/arm/mach-s3c64xx/s3c6410.c
index 522c086..59635d1 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
@@ -31,30 +31,18 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
void __init s3c6410_map_io(void)
{
- iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
/* initialise device information early */
s3c6410_default_sdhci0();
s3c6410_default_sdhci1();
@@ -70,9 +58,7 @@
void __init s3c6410_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c24xx_register_baseclocks(xtal);
- s3c64xx_register_clocks();
- s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
+ s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-fb-24bpp.c
rename to arch/arm/mach-s3c64xx/setup-fb-24bpp.c
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
similarity index 96%
rename from arch/arm/plat-s3c64xx/setup-i2c0.c
rename to arch/arm/mach-s3c64xx/setup-i2c0.c
index 3644807..d1b11e6 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,8 +18,8 @@
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
similarity index 96%
rename from arch/arm/plat-s3c64xx/setup-i2c1.c
rename to arch/arm/mach-s3c64xx/setup-i2c1.c
index bbe229b..2dce57d 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,8 +18,8 @@
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
similarity index 78%
rename from arch/arm/mach-s3c6400/setup-sdhci.c
rename to arch/arm/mach-s3c64xx/setup-sdhci.c
index 1039937..1a94203 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -26,7 +26,7 @@
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-char *s3c6400_hsmmc_clksrcs[4] = {
+char *s3c64xx_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
@@ -61,3 +61,12 @@
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
+void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
similarity index 97%
rename from arch/arm/plat-s3c64xx/sleep.S
rename to arch/arm/mach-s3c64xx/sleep.S
index 8e71fe9..b2ef443 100644
--- a/arch/arm/plat-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -1,4 +1,4 @@
-/* linux/0arch/arm/plat-s3c64xx/sleep.S
+/* linux/arch/arm/plat-s3c64xx/sleep.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -19,8 +19,8 @@
#undef S3C64XX_VA_GPIO
#define S3C64XX_VA_GPIO (0x0)
-#include <plat/regs-gpio.h>
-#include <plat/gpio-bank-n.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-bank-n.h>
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
new file mode 100644
index 0000000..4c29ff8
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -0,0 +1,21 @@
+# arch/arm/mach-s5p6440/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P6440
+
+config CPU_S5P6440
+ bool
+ help
+ Enable S5P6440 CPU support
+
+config MACH_SMDK6440
+ bool "SMDK6440"
+ select CPU_S5P6440
+ help
+ Machine support for the Samsung SMDK6440
+
+endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
new file mode 100644
index 0000000..1ad894b
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6440/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5P6440 system
+
+obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p6440/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
new file mode 100644
index 0000000..b2672e1
--- /dev/null
+++ b/arch/arm/mach-s5p6440/clock.c
@@ -0,0 +1,698 @@
+/* linux/arch/arm/mach-s5p6440/clock.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+#include <plat/pll.h>
+#include <plat/s5p6440.h>
+
+/* APLL Mux output clock */
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static int s5p6440_epll_enable(struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+ if (enable)
+ __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+ else
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ return 0;
+}
+
+static unsigned long s5p6440_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static u32 epll_div[][5] = {
+ { 36000000, 0, 48, 1, 4 },
+ { 48000000, 0, 32, 1, 3 },
+ { 60000000, 0, 40, 1, 3 },
+ { 72000000, 0, 48, 1, 3 },
+ { 84000000, 0, 28, 1, 2 },
+ { 96000000, 0, 32, 1, 2 },
+ { 32768000, 45264, 43, 1, 4 },
+ { 45158000, 6903, 30, 1, 3 },
+ { 49152000, 50332, 32, 1, 3 },
+ { 67738000, 10398, 45, 1, 3 },
+ { 73728000, 9961, 49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+
+ if (clk->rate == rate) /* Return if nothing changed */
+ return 0;
+
+ epll_con = __raw_readl(S5P_EPLL_CON);
+ epll_con_k = __raw_readl(S5P_EPLL_CON_K);
+
+ epll_con_k &= ~(PLL90XX_KDIV_MASK);
+ epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+ epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+ (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+ (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P_EPLL_CON);
+ __raw_writel(epll_con_k, S5P_EPLL_CON_K);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+ .get_rate = s5p6440_epll_get_rate,
+ .set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+static struct clk clk_h_low = {
+ .name = "hclk_low",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .ops = &clk_ops_def_setrate,
+};
+
+static struct clk clk_p_low = {
+ .name = "pclk_low",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .ops = &clk_ops_def_setrate,
+};
+
+enum perf_level {
+ L0 = 532*1000,
+ L1 = 266*1000,
+ L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+ /*{ARM_CLK, DIVarm, DIVhclk}*/
+ {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
+ {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
+ {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
+};
+
+static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv;
+
+ /* divisor mask starts at bit0, so no need to shift */
+ clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+ return rate / (clkdiv + 1);
+}
+
+static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 iter;
+
+ for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+ if (rate > clock_table[iter][0])
+ return clock_table[iter-1][0];
+ }
+
+ return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 round_tmp;
+ u32 iter;
+ u32 clk_div0_tmp;
+ u32 cur_rate = clk->ops->get_rate(clk);
+ unsigned long flags;
+
+ round_tmp = clk->ops->round_rate(clk, rate);
+ if (round_tmp == cur_rate)
+ return 0;
+
+
+ for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+ if (round_tmp == clock_table[iter][0])
+ break;
+ }
+
+ if (iter >= ARRAY_SIZE(clock_table))
+ iter = ARRAY_SIZE(clock_table) - 1;
+
+ local_irq_save(flags);
+ if (cur_rate > round_tmp) {
+ /* Frequency Down */
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+ clk_div0_tmp |= clock_table[iter][1];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+ ~(S5P_CLKDIV0_HCLK_MASK);
+ clk_div0_tmp |= clock_table[iter][2];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+ } else {
+ /* Frequency Up */
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+ ~(S5P_CLKDIV0_HCLK_MASK);
+ clk_div0_tmp |= clock_table[iter][2];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+ clk_div0_tmp |= clock_table[iter][1];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+ }
+ local_irq_restore(flags);
+
+ clk->rate = clock_table[iter][0];
+
+ return 0;
+}
+
+static struct clk_ops s5p6440_clkarm_ops = {
+ .get_rate = s5p6440_armclk_get_rate,
+ .set_rate = s5p6440_armclk_set_rate,
+ .round_rate = s5p6440_armclk_round_rate,
+};
+
+static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+
+ if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK)
+ rate /= 2;
+
+ return rate;
+}
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5p6440_clk_doutmpll_get_rate,
+ },
+};
+
+int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5P_OTHERS);
+ if (enable)
+ val |= S5P_OTHERS_USB_SIG_MASK;
+ else
+ val &= ~S5P_OTHERS_USB_SIG_MASK;
+
+ __raw_writel(val, S5P_OTHERS);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
+}
+
+static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
+}
+
+static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
+}
+
+static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
+}
+
+static int s5p6440_mem_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5p6440_mem_ctrl,
+ .ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_TSADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_IIC0,
+ }, {
+ .name = "i2s_v40",
+ .id = 0,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_IIS2,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_SPI1,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5p6440_sclk_ctrl,
+ .ctrlbit = S5P_CLKCON_SCLK0_SPI0_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5p6440_sclk_ctrl,
+ .ctrlbit = S5P_CLKCON_SCLK0_SPI1_48,
+ }, {
+ .name = "mmc_48m",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5p6440_sclk_ctrl,
+ .ctrlbit = S5P_CLKCON_SCLK0_MMC0_48,
+ }, {
+ .name = "mmc_48m",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5p6440_sclk_ctrl,
+ .ctrlbit = S5P_CLKCON_SCLK0_MMC1_48,
+ }, {
+ .name = "mmc_48m",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5p6440_sclk_ctrl,
+ .ctrlbit = S5P_CLKCON_SCLK0_MMC2_48,
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h_low,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = S5P_CLKCON_HCLK0_USB
+ }, {
+ .name = "post",
+ .id = -1,
+ .parent = &clk_h_low,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = S5P_CLKCON_HCLK0_POST0
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h_low,
+ .enable = s5p6440_hclk1_ctrl,
+ .ctrlbit = S5P_CLKCON_HCLK1_DISPCON,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h_low,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = S5P_CLKCON_HCLK0_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h_low,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = S5P_CLKCON_HCLK0_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h_low,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = S5P_CLKCON_HCLK0_HSMMC2,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_WDT,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_PWM,
+ }
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+ {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_GPIO,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p_low,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = S5P_CLKCON_PCLK_UART3,
+ }
+};
+
+static struct clk clk_iis_cd_v40 = {
+ .name = "iis_cdclk_v40",
+ .id = -1,
+};
+
+static struct clk clk_pcm_cd = {
+ .name = "pcm_cdclk",
+ .id = -1,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+ .sources = clkset_spi_mmc_list,
+ .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S5P_CLKCON_SCLK0_MMC0,
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_spi_mmc,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S5P_CLKCON_SCLK0_MMC1,
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_spi_mmc,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S5P_CLKCON_SCLK0_MMC2,
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_spi_mmc,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S5P_CLKCON_SCLK0_UART,
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "spi_epll",
+ .id = 0,
+ .ctrlbit = S5P_CLKCON_SCLK0_SPI0,
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_spi_mmc,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "spi_epll",
+ .id = 1,
+ .ctrlbit = S5P_CLKCON_SCLK0_SPI1,
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_spi_mmc,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+ }
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long hclk_low;
+ unsigned long pclk;
+ unsigned long pclk_low;
+ unsigned long epll;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned int ptr;
+ u32 clkdiv0;
+ u32 clkdiv3;
+
+ /* Set S5P6440 functions for clk_fout_epll */
+ clk_fout_epll.enable = s5p6440_epll_enable;
+ clk_fout_epll.ops = &s5p6440_epll_ops;
+
+ /* Set S5P6440 functions for arm clock */
+ clk_arm.parent = &clk_mout_apll.clk;
+ clk_arm.ops = &s5p6440_clkarm_ops;
+ clk_48m.enable = s5p6440_clk48m_ctrl;
+
+ clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+ clkdiv3 = __raw_readl(S5P_CLK_DIV3);
+
+ xtal_clk = clk_get(NULL, "ext_xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
+ __raw_readl(S5P_EPLL_CON_K));
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
+
+ printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+ " E=%ld.%ldMHz\n",
+ print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+ fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM);
+ hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK);
+ pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK);
+
+ if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) {
+ /* Asynchronous mode */
+ hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
+ } else {
+ /* Synchronous mode */
+ hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
+ }
+
+ pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW);
+
+ printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+ " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+ print_mhz(hclk), print_mhz(hclk_low),
+ print_mhz(pclk), print_mhz(pclk_low));
+
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_apll.rate = apll;
+
+ clk_f.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+ clk_h_low.rate = hclk_low;
+ clk_p_low.rate = pclk_low;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_mout_epll.clk,
+ &clk_mout_mpll.clk,
+ &clk_dout_mpll,
+ &clk_iis_cd_v40,
+ &clk_pcm_cd,
+ &clk_p_low,
+ &clk_h_low,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
new file mode 100644
index 0000000..1794131a
--- /dev/null
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/mach-s5p6440/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+
+static void s5p6440_idle(void)
+{
+ unsigned long val;
+
+ if (!need_resched()) {
+ val = __raw_readl(S5P_PWR_CFG);
+ val &= ~(0x3<<5);
+ val |= (0x1<<5);
+ __raw_writel(val, S5P_PWR_CFG);
+
+ cpu_do_idle();
+ }
+ local_irq_enable();
+}
+
+/* s5p6440_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6440_map_io(void)
+{
+ /* initialize any device information early */
+}
+
+void __init s5p6440_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6440_register_clocks();
+ s5p6440_setup_clocks();
+}
+
+void __init s5p6440_init_irq(void)
+{
+ /* S5P6440 supports only 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+ * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+ */
+ vic[0] = 0xff800ae7;
+ vic[1] = 0xffbf23e5;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6440_sysclass = {
+ .name = "s5p6440-core",
+};
+
+static struct sys_device s5p6440_sysdev = {
+ .cls = &s5p6440_sysclass,
+};
+
+static int __init s5p6440_core_init(void)
+{
+ return sysdev_class_register(&s5p6440_sysclass);
+}
+
+core_initcall(s5p6440_core_init);
+
+int __init s5p6440_init(void)
+{
+ printk(KERN_INFO "S5P6440: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5p6440_idle;
+
+ return sysdev_register(&s5p6440_sysdev);
+}
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
new file mode 100644
index 0000000..b0ea741
--- /dev/null
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -0,0 +1,322 @@
+/* arch/arm/mach-s5p6440/gpio.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* GPIO bank summary:
+*
+* Bank GPIOs Style SlpCon ExtInt Group
+* A 6 4Bit Yes 1
+* B 7 4Bit Yes 1
+* C 8 4Bit Yes 2
+* F 2 2Bit Yes 4 [1]
+* G 7 4Bit Yes 5
+* H 10 4Bit[2] Yes 6
+* I 16 2Bit Yes None
+* J 12 2Bit Yes None
+* N 16 2Bit No IRQ_EINT
+* P 8 2Bit Yes 8
+* R 15 4Bit[2] Yes 8
+*
+* [1] BANKF pins 14,15 do not form part of the external interrupt sources
+* [2] BANK has two control registers, GPxCON0 and GPxCON1
+*/
+
+static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ switch (offset) {
+ case 6:
+ offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ offset -= 7;
+ break;
+ }
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ return 0;
+}
+
+static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned con_offset = offset;
+
+ switch (con_offset) {
+ case 6:
+ con_offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ con_offset -= 7;
+ break;
+ }
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ return 0;
+}
+
+int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift;
+ u32 con;
+
+ switch (off) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ shift = (off & 7) * 4;
+ reg -= 4;
+ break;
+ case 6:
+ shift = ((off + 1) & 7) * 4;
+ reg -= 4;
+ default:
+ shift = ((off + 1) & 7) * 4;
+ break;
+ }
+
+ if (s3c_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
+ {
+ .cfg_eint = 0,
+ }, {
+ .cfg_eint = 7,
+ }, {
+ .cfg_eint = 3,
+ .set_config = s5p6440_gpio_setcfg_4bit_rbank,
+ }, {
+ .cfg_eint = 0,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ }, {
+ .cfg_eint = 2,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ }, {
+ .cfg_eint = 3,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+ {
+ .base = S5P6440_GPA_BASE,
+ .config = &s5p6440_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPA(0),
+ .ngpio = S5P6440_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .base = S5P6440_GPB_BASE,
+ .config = &s5p6440_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPB(0),
+ .ngpio = S5P6440_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S5P6440_GPC_BASE,
+ .config = &s5p6440_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPC(0),
+ .ngpio = S5P6440_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5P6440_GPG_BASE,
+ .config = &s5p6440_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPG(0),
+ .ngpio = S5P6440_GPIO_G_NR,
+ .label = "GPG",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+ {
+ .base = S5P6440_GPH_BASE + 0x4,
+ .config = &s5p6440_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPH(0),
+ .ngpio = S5P6440_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+};
+
+static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
+ {
+ .base = S5P6440_GPR_BASE + 0x4,
+ .config = &s5p6440_gpio_cfgs[2],
+ .chip = {
+ .base = S5P6440_GPR(0),
+ .ngpio = S5P6440_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+ {
+ .base = S5P6440_GPF_BASE,
+ .config = &s5p6440_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6440_GPF(0),
+ .ngpio = S5P6440_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P6440_GPI_BASE,
+ .config = &s5p6440_gpio_cfgs[3],
+ .chip = {
+ .base = S5P6440_GPI(0),
+ .ngpio = S5P6440_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P6440_GPJ_BASE,
+ .config = &s5p6440_gpio_cfgs[3],
+ .chip = {
+ .base = S5P6440_GPJ(0),
+ .ngpio = S5P6440_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P6440_GPN_BASE,
+ .config = &s5p6440_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6440_GPN(0),
+ .ngpio = S5P6440_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P6440_GPP_BASE,
+ .config = &s5p6440_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6440_GPP(0),
+ .ngpio = S5P6440_GPIO_P_NR,
+ .label = "GPP",
+ },
+ },
+};
+
+void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chipcfg++) {
+ if (!chipcfg->set_config)
+ chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit;
+ if (!chipcfg->set_pull)
+ chipcfg->set_pull = s3c_gpio_setpull_updown;
+ if (!chipcfg->get_pull)
+ chipcfg->get_pull = s3c_gpio_getpull_updown;
+ }
+}
+
+static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
+ chip->chip.direction_output =
+ s5p6440_gpiolib_rbank_4bit2_output;
+ s3c_gpiolib_add(chip);
+ }
+}
+
+static int __init s5p6440_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
+ int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
+
+ s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
+ ARRAY_SIZE(s5p6440_gpio_cfgs));
+
+ for (; nr_chips > 0; nr_chips--, chips++)
+ s3c_gpiolib_add(chips);
+
+ samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+ ARRAY_SIZE(s5p6440_gpio_4bit));
+
+ samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+ ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+ s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
+ ARRAY_SIZE(gpio_rbank_4bit2));
+
+ return 0;
+}
+arch_initcall(s5p6440_gpiolib_init);
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
similarity index 77%
copy from arch/arm/mach-s3c6400/include/mach/debug-macro.S
copy to arch/arm/mach-s5p6440/include/mach/debug-macro.S
index 5c88875..48cdb0d 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -1,9 +1,7 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,11 +19,11 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, tmp
+ .macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
- ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
new file mode 100644
index 0000000..e65f1b9
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6440
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
new file mode 100644
index 0000000..2178383
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/gpio.h
@@ -0,0 +1,80 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6440_GPIO_A_NR (6)
+#define S5P6440_GPIO_B_NR (7)
+#define S5P6440_GPIO_C_NR (8)
+#define S5P6440_GPIO_F_NR (2)
+#define S5P6440_GPIO_G_NR (7)
+#define S5P6440_GPIO_H_NR (10)
+#define S5P6440_GPIO_I_NR (16)
+#define S5P6440_GPIO_J_NR (12)
+#define S5P6440_GPIO_N_NR (16)
+#define S5P6440_GPIO_P_NR (8)
+#define S5P6440_GPIO_R_NR (15)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+#define S5P6440_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5P6440_GPIO_A_START = 0,
+ S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
+ S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
+ S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
+ S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
+ S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
+ S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
+ S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
+ S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
+ S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
+ S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+/* S5P6440 GPIO number definitions. */
+#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr))
+
+/* the end of the S5P6440 specific gpios */
+#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S3C_GPIO_END S5P6440_GPIO_END
+
+/* define the number of gpios we need to the one after the GPR() range */
+#define ARCH_NR_GPIOS (S5P6440_GPR(S5P6440_GPIO_R_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h
new file mode 100644
index 0000000..be8b26e
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s5p6440/include/mach/io.h
index f6a5363..fa2d69c 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s5p6440/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s5p6440/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C64XX based
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
new file mode 100644
index 0000000..a4b9b40
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_S5P_IRQS_H
+#define __ASM_ARCH_S5P_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3 S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11 S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(2)
+#define IRQ_IIC1 S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40 S5P_IRQ_VIC0(6)
+#define IRQ_GPS S5P_IRQ_VIC0(7)
+#define IRQ_POST0 S5P_IRQ_VIC0(9)
+#define IRQ_2D S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25)
+#define IRQ_WDT S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0 S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1 S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2 S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15 S5P_IRQ_VIC1(0)
+#define IRQ_PCM0 S5P_IRQ_VIC1(2)
+#define IRQ_UART0 S5P_IRQ_VIC1(5)
+#define IRQ_UART1 S5P_IRQ_VIC1(6)
+#define IRQ_UART2 S5P_IRQ_VIC1(7)
+#define IRQ_UART3 S5P_IRQ_VIC1(8)
+#define IRQ_DMA0 S5P_IRQ_VIC1(9)
+#define IRQ_NFC S5P_IRQ_VIC1(13)
+#define IRQ_SPI0 S5P_IRQ_VIC1(16)
+#define IRQ_SPI1 S5P_IRQ_VIC1(17)
+#define IRQ_IIC S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
+#define IRQ_FIMGVG S5P_IRQ_VIC1(20)
+#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
+#define IRQ_PMUIRQ S5P_IRQ_VIC1(23)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
+#define IRQ_OTG S5P_IRQ_VIC1(26)
+#define IRQ_DSI S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28)
+#define IRQ_TSI S5P_IRQ_VIC1(29)
+#define IRQ_PENDN S5P_IRQ_VIC1(30)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_ADC S5P_IRQ_VIC1(31)
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S5P_EINT(x)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR (15)
+#define IRQ_EINT_GROUP2_NR (8)
+#define IRQ_EINT_GROUP5_NR (7)
+#define IRQ_EINT_GROUP6_NR (10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR (11)
+
+#define IRQ_EINT_GROUP_BASE S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_S5P_IRQS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
new file mode 100644
index 0000000..8924e5a
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/map.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6440_PA_CHIPID (0xE0000000)
+#define S5P_PA_CHIPID S5P6440_PA_CHIPID
+
+#define S5P6440_PA_SYSCON (0xE0100000)
+#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0)
+#define S5P_PA_SYSCON S5P6440_PA_SYSCON
+
+#define S5P6440_PA_GPIO (0xE0308000)
+#define S5P_PA_GPIO S5P6440_PA_GPIO
+
+#define S5P6440_PA_VIC0 (0xE4000000)
+#define S5P_PA_VIC0 S5P6440_PA_VIC0
+
+#define S5P6440_PA_VIC1 (0xE4100000)
+#define S5P_PA_VIC1 S5P6440_PA_VIC1
+
+#define S5P6440_PA_TIMER (0xEA000000)
+#define S5P_PA_TIMER S5P6440_PA_TIMER
+
+#define S5P6440_PA_RTC (0xEA100000)
+#define S5P_PA_RTC S5P6440_PA_RTC
+
+#define S5P6440_PA_WDT (0xEA200000)
+#define S5P_PA_WDT S5P6440_PA_WDT
+
+#define S5P6440_PA_UART (0xEC000000)
+
+#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART SZ_256
+
+#define S5P6440_PA_IIC0 (0xEC104000)
+
+#define S5P6440_PA_HSOTG (0xED100000)
+
+#define S5P6440_PA_HSMMC0 (0xED800000)
+#define S5P6440_PA_HSMMC1 (0xED900000)
+#define S5P6440_PA_HSMMC2 (0xEDA00000)
+
+#define S5P6440_PA_SDRAM (0x20000000)
+#define S5P_PA_SDRAM S5P6440_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5P6440_PA_UART
+#define S3C_PA_IIC S5P6440_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h
new file mode 100644
index 0000000..d62910c
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+#define CONSISTENT_DMA_SIZE SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
new file mode 100644
index 0000000..c4bb7c5
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
new file mode 100644
index 0000000..c783ecc
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_APLL_CON S5P_CLKREG(0x0C)
+#define S5P_MPLL_CON S5P_CLKREG(0x10)
+#define S5P_EPLL_CON S5P_CLKREG(0x14)
+#define S5P_EPLL_CON_K S5P_CLKREG(0x18)
+#define S5P_CLK_SRC0 S5P_CLKREG(0x1C)
+#define S5P_CLK_DIV0 S5P_CLKREG(0x20)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x24)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x28)
+#define S5P_CLK_OUT S5P_CLKREG(0x2C)
+#define S5P_CLK_GATE_HCLK0 S5P_CLKREG(0x30)
+#define S5P_CLK_GATE_PCLK S5P_CLKREG(0x34)
+#define S5P_CLK_GATE_SCLK0 S5P_CLKREG(0x38)
+#define S5P_CLK_GATE_MEM0 S5P_CLKREG(0x3C)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x40)
+#define S5P_CLK_GATE_HCLK1 S5P_CLKREG(0x44)
+#define S5P_CLK_GATE_SCLK1 S5P_CLKREG(0x48)
+#define S5P_AHB_CON0 S5P_CLKREG(0x100)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x10C)
+#define S5P_SWRESET S5P_CLKREG(0x114)
+#define S5P_SYS_ID S5P_CLKREG(0x118)
+#define S5P_SYS_OTHERS S5P_CLKREG(0x11C)
+#define S5P_MEM_CFG_STAT S5P_CLKREG(0x12C)
+#define S5P_PWR_CFG S5P_CLKREG(0x804)
+#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0x808)
+#define S5P_NORMAL_CFG S5P_CLKREG(0x810)
+#define S5P_STOP_CFG S5P_CLKREG(0x814)
+#define S5P_SLEEP_CFG S5P_CLKREG(0x818)
+#define S5P_OSC_FREQ S5P_CLKREG(0x820)
+#define S5P_OSC_STABLE S5P_CLKREG(0x824)
+#define S5P_PWR_STABLE S5P_CLKREG(0x828)
+#define S5P_MTC_STABLE S5P_CLKREG(0x830)
+#define S5P_OTHERS S5P_CLKREG(0x900)
+#define S5P_RST_STAT S5P_CLKREG(0x904)
+#define S5P_WAKEUP_STAT S5P_CLKREG(0x908)
+#define S5P_SLPEN S5P_CLKREG(0x930)
+#define S5P_INFORM0 S5P_CLKREG(0xA00)
+#define S5P_INFORM1 S5P_CLKREG(0xA04)
+#define S5P_INFORM2 S5P_CLKREG(0xA08)
+#define S5P_INFORM3 S5P_CLKREG(0xA0C)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_PCLK_MASK (0xf << 12)
+#define S5P_CLKDIV0_PCLK_SHIFT (12)
+#define S5P_CLKDIV0_HCLK_MASK (0xf << 8)
+#define S5P_CLKDIV0_HCLK_SHIFT (8)
+#define S5P_CLKDIV0_MPLL_MASK (0x1 << 4)
+#define S5P_CLKDIV0_ARM_MASK (0xf << 0)
+#define S5P_CLKDIV0_ARM_SHIFT (0)
+
+/* CLKDIV3 */
+#define S5P_CLKDIV3_PCLK_LOW_MASK (0xf << 12)
+#define S5P_CLKDIV3_PCLK_LOW_SHIFT (12)
+#define S5P_CLKDIV3_HCLK_LOW_MASK (0xf << 8)
+#define S5P_CLKDIV3_HCLK_LOW_SHIFT (8)
+
+/* HCLK0 GATE Registers */
+#define S5P_CLKCON_HCLK0_USB (1<<20)
+#define S5P_CLKCON_HCLK0_HSMMC2 (1<<19)
+#define S5P_CLKCON_HCLK0_HSMMC1 (1<<18)
+#define S5P_CLKCON_HCLK0_HSMMC0 (1<<17)
+#define S5P_CLKCON_HCLK0_POST0 (1<<5)
+
+/* HCLK1 GATE Registers */
+#define S5P_CLKCON_HCLK1_DISPCON (1<<1)
+
+/* PCLK GATE Registers */
+#define S5P_CLKCON_PCLK_IIS2 (1<<26)
+#define S5P_CLKCON_PCLK_SPI1 (1<<22)
+#define S5P_CLKCON_PCLK_SPI0 (1<<21)
+#define S5P_CLKCON_PCLK_GPIO (1<<18)
+#define S5P_CLKCON_PCLK_IIC0 (1<<17)
+#define S5P_CLKCON_PCLK_TSADC (1<<12)
+#define S5P_CLKCON_PCLK_PWM (1<<7)
+#define S5P_CLKCON_PCLK_RTC (1<<6)
+#define S5P_CLKCON_PCLK_WDT (1<<5)
+#define S5P_CLKCON_PCLK_UART3 (1<<4)
+#define S5P_CLKCON_PCLK_UART2 (1<<3)
+#define S5P_CLKCON_PCLK_UART1 (1<<2)
+#define S5P_CLKCON_PCLK_UART0 (1<<1)
+
+/* SCLK0 GATE Registers */
+#define S5P_CLKCON_SCLK0_MMC2_48 (1<<29)
+#define S5P_CLKCON_SCLK0_MMC1_48 (1<<28)
+#define S5P_CLKCON_SCLK0_MMC0_48 (1<<27)
+#define S5P_CLKCON_SCLK0_MMC2 (1<<26)
+#define S5P_CLKCON_SCLK0_MMC1 (1<<25)
+#define S5P_CLKCON_SCLK0_MMC0 (1<<24)
+#define S5P_CLKCON_SCLK0_SPI1_48 (1<<23)
+#define S5P_CLKCON_SCLK0_SPI0_48 (1<<22)
+#define S5P_CLKCON_SCLK0_SPI1 (1<<21)
+#define S5P_CLKCON_SCLK0_SPI0 (1<<20)
+#define S5P_CLKCON_SCLK0_UART (1<<5)
+
+/* SCLK1 GATE Registers */
+
+/* MEM0 GATE Registers */
+#define S5P_CLKCON_MEM0_HCLK_NFCON (1<<2)
+
+/*OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK (1<<16)
+#define S5P_OTHERS_HCLK_LOW_SEL_MPLL (1<<6)
+
+/* Compatibility defines */
+#define ARM_CLK_DIV S5P_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT 0
+#define ARM_DIV_MASK (0xf << ARM_DIV_RATIO_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
new file mode 100644
index 0000000..82ff753
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Base addresses for each of the banks */
+#define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000)
+#define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020)
+#define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040)
+#define S5P6440_GPF_BASE (S5P_VA_GPIO + 0x00A0)
+#define S5P6440_GPG_BASE (S5P_VA_GPIO + 0x00C0)
+#define S5P6440_GPH_BASE (S5P_VA_GPIO + 0x00E0)
+#define S5P6440_GPI_BASE (S5P_VA_GPIO + 0x0100)
+#define S5P6440_GPJ_BASE (S5P_VA_GPIO + 0x0120)
+#define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830)
+#define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160)
+#define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290)
+#define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900)
+#define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910)
+#define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914)
+#define S5P6440_EINT0MASK (S5P_VA_GPIO + 0x920)
+#define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924)
+
+/* for LCD */
+#define S5P6440_SPCON_LCD_SEL_RGB (1 << 0)
+#define S5P6440_SPCON_LCD_SEL_MASK (3 << 0)
+
+/* These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP,
+ * useful for others set of GPIO's (4 bit)
+ */
+#define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+#define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+
+/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ * */
+#define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2))
+#define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
new file mode 100644
index 0000000..a961f4b
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h
new file mode 100644
index 0000000..d2dd817
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/system.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
new file mode 100644
index 0000000..2f25c7f
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/tick.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5p6440/include/mach/timex.h
index 2a425ed..fb2e8cd 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5p6440/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
new file mode 100644
index 0000000..7c1f600d
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
new file mode 100644
index 0000000..16df257
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
new file mode 100644
index 0000000..a1f3727
--- /dev/null
+++ b/arch/arm/mach-s5p6440/init.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s5p6440/init.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
+ [0] = {
+ .name = "pclk_low",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "uclk1",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5p6440_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
new file mode 100644
index 0000000..3ae88f2
--- /dev/null
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -0,0 +1,111 @@
+/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s5p6440.h>
+#include <plat/clock.h>
+#include <mach/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+
+#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_TXTRIG16 | \
+ S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5P6440_UCON_DEFAULT,
+ .ulcon = S5P6440_ULCON_DEFAULT,
+ .ufcon = S5P6440_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5P6440_UCON_DEFAULT,
+ .ulcon = S5P6440_ULCON_DEFAULT,
+ .ufcon = S5P6440_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5P6440_UCON_DEFAULT,
+ .ulcon = S5P6440_ULCON_DEFAULT,
+ .ufcon = S5P6440_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5P6440_UCON_DEFAULT,
+ .ulcon = S5P6440_ULCON_DEFAULT,
+ .ufcon = S5P6440_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+};
+
+static void __init smdk6440_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_SYS_ID);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+}
+
+static void __init smdk6440_machine_init(void)
+{
+ platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+
+ .init_irq = s5p6440_init_irq,
+ .map_io = smdk6440_map_io,
+ .init_machine = smdk6440_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
new file mode 100644
index 0000000..4f3f6de
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -0,0 +1,24 @@
+# arch/arm/mach-s5p6442/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5P6442
+
+if ARCH_S5P6442
+
+config CPU_S5P6442
+ bool
+ select PLAT_S5P
+ help
+ Enable S5P6442 CPU support
+
+config MACH_SMDK6442
+ bool "SMDK6442"
+ select CPU_S5P6442
+ help
+ Machine support for Samsung SMDK6442
+
+endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
new file mode 100644
index 0000000..dde39a6
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6442/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5P6442 system
+
+obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
new file mode 100644
index 0000000..3aadbf4
--- /dev/null
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -0,0 +1,396 @@
+/* linux/arch/arm/mach-s5p6442/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6442.h>
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+/* Possible clock sources for ARM Mux */
+static struct clk *clk_src_arm_list[] = {
+ [1] = &clk_mout_apll.clk,
+ [2] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_arm = {
+ .sources = clk_src_arm_list,
+ .nr_sources = ARRAY_SIZE(clk_src_arm_list),
+};
+
+static struct clksrc_clk clk_mout_arm = {
+ .clk = {
+ .name = "mout_arm",
+ .id = -1,
+ },
+ .sources = &clk_src_arm,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+};
+
+static struct clk clk_dout_a2m = {
+ .name = "dout_a2m",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+};
+
+/* Possible clock sources for D0 Mux */
+static struct clk *clk_src_d0_list[] = {
+ [1] = &clk_mout_mpll.clk,
+ [2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d0 = {
+ .sources = clk_src_d0_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d0_list),
+};
+
+static struct clksrc_clk clk_mout_d0 = {
+ .clk = {
+ .name = "mout_d0",
+ .id = -1,
+ },
+ .sources = &clk_src_d0,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
+};
+
+static struct clk clk_dout_apll = {
+ .name = "dout_apll",
+ .id = -1,
+ .parent = &clk_mout_arm.clk,
+};
+
+/* Possible clock sources for D0SYNC Mux */
+static struct clk *clk_src_d0sync_list[] = {
+ [1] = &clk_mout_d0.clk,
+ [2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d0sync = {
+ .sources = clk_src_d0sync_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d0sync_list),
+};
+
+static struct clksrc_clk clk_mout_d0sync = {
+ .clk = {
+ .name = "mout_d0sync",
+ .id = -1,
+ },
+ .sources = &clk_src_d0sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+};
+
+/* Possible clock sources for D1 Mux */
+static struct clk *clk_src_d1_list[] = {
+ [1] = &clk_mout_mpll.clk,
+ [2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d1 = {
+ .sources = clk_src_d1_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d1_list),
+};
+
+static struct clksrc_clk clk_mout_d1 = {
+ .clk = {
+ .name = "mout_d1",
+ .id = -1,
+ },
+ .sources = &clk_src_d1,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
+};
+
+/* Possible clock sources for D1SYNC Mux */
+static struct clk *clk_src_d1sync_list[] = {
+ [1] = &clk_mout_d1.clk,
+ [2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d1sync = {
+ .sources = clk_src_d1sync_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d1sync_list),
+};
+
+static struct clksrc_clk clk_mout_d1sync = {
+ .clk = {
+ .name = "mout_d1sync",
+ .id = -1,
+ },
+ .sources = &clk_src_d1sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+};
+
+static struct clk clk_hclkd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .parent = &clk_mout_d0sync.clk,
+};
+
+static struct clk clk_hclkd1 = {
+ .name = "hclkd1",
+ .id = -1,
+ .parent = &clk_mout_d1sync.clk,
+};
+
+static struct clk clk_pclkd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .parent = &clk_hclkd0,
+};
+
+static struct clk clk_pclkd1 = {
+ .name = "pclkd1",
+ .id = -1,
+ .parent = &clk_hclkd1,
+};
+
+int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "dout_a2m",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+ }, {
+ .clk = {
+ .name = "dout_apll",
+ .id = -1,
+ .parent = &clk_mout_arm.clk,
+ },
+ .sources = &clk_src_arm,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+ }, {
+ .clk = {
+ .name = "hclkd1",
+ .id = -1,
+ .parent = &clk_mout_d1sync.clk,
+ },
+ .sources = &clk_src_d1sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "hclkd0",
+ .id = -1,
+ .parent = &clk_mout_d0sync.clk,
+ },
+ .sources = &clk_src_d0sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "pclkd0",
+ .id = -1,
+ .parent = &clk_hclkd0,
+ },
+ .sources = &clk_src_d0sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+ }, {
+ .clk = {
+ .name = "pclkd1",
+ .id = -1,
+ .parent = &clk_hclkd1,
+ },
+ .sources = &clk_src_d1sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+ }
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_mpll,
+ &clk_mout_epll,
+ &clk_mout_arm,
+ &clk_mout_d0,
+ &clk_mout_d0sync,
+ &clk_mout_d1,
+ &clk_mout_d1sync,
+};
+
+void __init_or_cpufreq s5p6442_setup_clocks(void)
+{
+ struct clk *pclkd0_clk;
+ struct clk *pclkd1_clk;
+
+ unsigned long xtal;
+ unsigned long arm;
+ unsigned long hclkd0 = 0;
+ unsigned long hclkd1 = 0;
+ unsigned long pclkd0 = 0;
+ unsigned long pclkd1 = 0;
+
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal = clk_get_rate(&clk_xtal);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+ epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+ printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+ apll, mpll, epll);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+
+ arm = clk_get_rate(&clk_dout_apll);
+ hclkd0 = clk_get_rate(&clk_hclkd0);
+ hclkd1 = clk_get_rate(&clk_hclkd1);
+
+ pclkd0_clk = clk_get(NULL, "pclkd0");
+ BUG_ON(IS_ERR(pclkd0_clk));
+
+ pclkd0 = clk_get_rate(pclkd0_clk);
+ clk_put(pclkd0_clk);
+
+ pclkd1_clk = clk_get(NULL, "pclkd1");
+ BUG_ON(IS_ERR(pclkd1_clk));
+
+ pclkd1 = clk_get_rate(pclkd1_clk);
+ clk_put(pclkd1_clk);
+
+ printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
+ hclkd0, hclkd1, pclkd0, pclkd1);
+
+ /* For backward compatibility */
+ clk_f.rate = arm;
+ clk_h.rate = hclkd1;
+ clk_p.rate = pclkd1;
+
+ clk_pclkd0.rate = pclkd0;
+ clk_pclkd1.rate = pclkd1;
+}
+
+static struct clk init_clocks[] = {
+ {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<17),
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<18),
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<19),
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<23),
+ },
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_mout_apll.clk,
+ &clk_mout_mpll.clk,
+ &clk_mout_epll.clk,
+ &clk_mout_d0.clk,
+ &clk_mout_d0sync.clk,
+ &clk_mout_d1.clk,
+ &clk_mout_d1sync.clk,
+ &clk_hclkd0,
+ &clk_pclkd0,
+ &clk_hclkd1,
+ &clk_pclkd1,
+};
+
+void __init s5p6442_register_clocks(void)
+{
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
new file mode 100644
index 0000000..bc2524d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s5p6442/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6442.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p6442_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5P6442_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void s5p6442_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/* s5p6442_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6442_map_io(void)
+{
+ iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
+}
+
+void __init s5p6442_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6442_register_clocks();
+ s5p6442_setup_clocks();
+}
+
+void __init s5p6442_init_irq(void)
+{
+ /* S5P6442 supports 3 VIC */
+ u32 vic[3];
+
+ /* VIC0, VIC1, and VIC2: some interrupt reserved */
+ vic[0] = 0x7fefffff;
+ vic[1] = 0X7f389c81;
+ vic[2] = 0X1bbbcfff;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6442_sysclass = {
+ .name = "s5p6442-core",
+};
+
+static struct sys_device s5p6442_sysdev = {
+ .cls = &s5p6442_sysclass,
+};
+
+static int __init s5p6442_core_init(void)
+{
+ return sysdev_class_register(&s5p6442_sysclass);
+}
+
+core_initcall(s5p6442_core_init);
+
+int __init s5p6442_init(void)
+{
+ printk(KERN_INFO "S5P6442: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5p6442_idle;
+
+ return sysdev_register(&s5p6442_sysdev);
+}
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
new file mode 100644
index 0000000..1aae691
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d574ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S5P_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
new file mode 100644
index 0000000..b8715df
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/gpio.h
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6442_GPIO_A0_NR (8)
+#define S5P6442_GPIO_A1_NR (2)
+#define S5P6442_GPIO_B_NR (4)
+#define S5P6442_GPIO_C0_NR (5)
+#define S5P6442_GPIO_C1_NR (5)
+#define S5P6442_GPIO_D0_NR (2)
+#define S5P6442_GPIO_D1_NR (6)
+#define S5P6442_GPIO_E0_NR (8)
+#define S5P6442_GPIO_E1_NR (5)
+#define S5P6442_GPIO_F0_NR (8)
+#define S5P6442_GPIO_F1_NR (8)
+#define S5P6442_GPIO_F2_NR (8)
+#define S5P6442_GPIO_F3_NR (6)
+#define S5P6442_GPIO_G0_NR (7)
+#define S5P6442_GPIO_G1_NR (7)
+#define S5P6442_GPIO_G2_NR (7)
+#define S5P6442_GPIO_H0_NR (8)
+#define S5P6442_GPIO_H1_NR (8)
+#define S5P6442_GPIO_H2_NR (8)
+#define S5P6442_GPIO_H3_NR (8)
+#define S5P6442_GPIO_J0_NR (8)
+#define S5P6442_GPIO_J1_NR (6)
+#define S5P6442_GPIO_J2_NR (8)
+#define S5P6442_GPIO_J3_NR (8)
+#define S5P6442_GPIO_J4_NR (5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P6442_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5P6442_GPIO_A0_START = 0,
+ S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
+ S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
+ S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
+ S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
+ S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
+ S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
+ S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
+ S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
+ S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
+ S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
+ S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
+ S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
+ S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
+ S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
+ S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
+ S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
+ S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
+ S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
+ S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
+ S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
+ S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
+ S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
+ S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
+ S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
+};
+
+/* S5P6442 GPIO number definitions. */
+#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr))
+#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr))
+#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr))
+#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr))
+#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr))
+#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr))
+#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr))
+#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr))
+#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr))
+#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr))
+#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr))
+#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr))
+#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr))
+#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr))
+#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr))
+#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr))
+#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr))
+#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr))
+#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr))
+#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr))
+#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr))
+#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr))
+#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr))
+#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr))
+#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr))
+
+/* the end of the S5P6442 specific gpios */
+#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END S5P6442_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
new file mode 100644
index 0000000..8cd7b67
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
new file mode 100644
index 0000000..5d2195a
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/io.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P6442
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
new file mode 100644
index 0000000..da66580
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
+#define IRQ_BATF S5P_IRQ_VIC0(17)
+#define IRQ_MDMA S5P_IRQ_VIC0(18)
+#define IRQ_PDMA S5P_IRQ_VIC0(19)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
+#define IRQ_WDT S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
+
+/* VIC1 */
+#define IRQ_nPMUIRQ S5P_IRQ_VIC1(0)
+#define IRQ_ONENAND S5P_IRQ_VIC1(7)
+#define IRQ_UART0 S5P_IRQ_VIC1(10)
+#define IRQ_UART1 S5P_IRQ_VIC1(11)
+#define IRQ_UART2 S5P_IRQ_VIC1(12)
+#define IRQ_SPI0 S5P_IRQ_VIC1(15)
+#define IRQ_IIC S5P_IRQ_VIC1(19)
+#define IRQ_IIC1 S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 S5P_IRQ_VIC1(21)
+#define IRQ_OTG S5P_IRQ_VIC1(24)
+#define IRQ_MSM S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
+#define IRQ_COMMRX S5P_IRQ_VIC1(29)
+#define IRQ_COMMTX S5P_IRQ_VIC1(30)
+
+/* VIC2 */
+#define IRQ_LCD0 S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
+#define IRQ_JPEG S5P_IRQ_VIC2(8)
+#define IRQ_3D S5P_IRQ_VIC2(10)
+#define IRQ_Mixer S5P_IRQ_VIC2(11)
+#define IRQ_MFC S5P_IRQ_VIC2(14)
+#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 S5P_IRQ_VIC2(17)
+#define IRQ_RP S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 S5P_IRQ_VIC2(21)
+#define IRQ_ADC S5P_IRQ_VIC2(23)
+#define IRQ_PENDN S5P_IRQ_VIC2(24)
+#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
+#define IRQ_SSS_INT S5P_IRQ_VIC2(27)
+#define IRQ_SSS_HASH S5P_IRQ_VIC2(28)
+#define IRQ_VIC_END S5P_IRQ_VIC2(31)
+
+#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
+
+#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
+ (S5P_IRQ_EINT_BASE + (x)-16))
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT(31) + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
new file mode 100644
index 0000000..685277d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -0,0 +1,58 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6442_PA_CHIPID (0xE0000000)
+#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+
+#define S5P6442_PA_SYSCON (0xE0100000)
+#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+
+#define S5P6442_PA_GPIO (0xE0200000)
+#define S5P_PA_GPIO S5P6442_PA_GPIO
+
+#define S5P6442_PA_VIC0 (0xE4000000)
+#define S5P_PA_VIC0 S5P6442_PA_VIC0
+
+#define S5P6442_PA_VIC1 (0xE4100000)
+#define S5P_PA_VIC1 S5P6442_PA_VIC1
+
+#define S5P6442_PA_VIC2 (0xE4200000)
+#define S5P_PA_VIC2 S5P6442_PA_VIC2
+
+#define S5P6442_PA_TIMER (0xEA000000)
+#define S5P_PA_TIMER S5P6442_PA_TIMER
+
+#define S5P6442_PA_SYSTIMER (0xEA100000)
+
+#define S5P6442_PA_UART (0xEC000000)
+
+#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800)
+#define S5P_SZ_UART SZ_256
+
+#define S5P6442_PA_IIC0 (0xEC100000)
+
+#define S5P6442_PA_SDRAM (0x20000000)
+#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5P6442_PA_UART
+#define S3C_PA_IIC S5P6442_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
new file mode 100644
index 0000000..9ddd877
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+#define CONSISTENT_DMA_SIZE SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
new file mode 100644
index 0000000..15e8525
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5P6442 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
new file mode 100644
index 0000000..d8360b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x108)
+#define S5P_EPLL_CON S5P_CLKREG(0x110)
+#define S5P_VPLL_CON S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4 S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5 S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6 S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
+
+#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
+
+/* CLK_OUT */
+#define S5P_CLK_OUT_SHIFT (12)
+#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT)
+#define S5P_CLK_OUT S5P_CLKREG(0x500)
+
+#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000)
+#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004)
+
+#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100)
+#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104)
+
+#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
+
+/* Register Bit definition */
+#define S5P_EPLL_EN (1<<31)
+#define S5P_EPLL_MASK 0xffffffff
+#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT (0)
+#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT (4)
+#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_D0CLK_SHIFT (16)
+#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT)
+#define S5P_CLKDIV0_P0CLK_SHIFT (20)
+#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
+#define S5P_CLKDIV0_D1CLK_SHIFT (24)
+#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT)
+#define S5P_CLKDIV0_P1CLK_SHIFT (28)
+#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
+
+/* Clock MUX status Registers */
+#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0)
+#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4)
+#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8)
+#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12)
+#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16)
+#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20)
+#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24)
+#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
+#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24)
+#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
+#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28)
+#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
new file mode 100644
index 0000000..73782b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
new file mode 100644
index 0000000..8bcd8ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
new file mode 100644
index 0000000..e1d4cab
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5P6442 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
similarity index 83%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5p6442/include/mach/timex.h
index 2a425ed..ff8f2fc 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5p6442/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s5p6442/include/mach/timex.h
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S5P6442 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
new file mode 100644
index 0000000..5ac7cbe
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
new file mode 100644
index 0000000..be333368
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5P6442 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
new file mode 100644
index 0000000..1874bdb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6442.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
+ [0] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5p6442_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
new file mode 100644
index 0000000..0d63371
--- /dev/null
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5p6442.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5P6442_UCON_DEFAULT,
+ .ulcon = S5P6442_ULCON_DEFAULT,
+ .ufcon = S5P6442_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5P6442_UCON_DEFAULT,
+ .ulcon = S5P6442_ULCON_DEFAULT,
+ .ufcon = S5P6442_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5P6442_UCON_DEFAULT,
+ .ulcon = S5P6442_ULCON_DEFAULT,
+ .ufcon = S5P6442_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdk6442_devices[] __initdata = {
+};
+
+static void __init smdk6442_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
+}
+
+static void __init smdk6442_machine_init(void)
+{
+ platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
+}
+
+MACHINE_START(SMDK6442, "SMDK6442")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5p6442_init_irq,
+ .map_io = smdk6442_map_io,
+ .init_machine = smdk6442_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
deleted file mode 100644
index ad28d8e..0000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO core support
- *
- * Based on mach-s3c6400/include/mach/gpio-core.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s5pc100/include/mach/io.h
index f6a5363..819acf5 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s5pc100/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s5pc100/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S5PC100 systems
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index d3de0f3..f338c9e 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -21,7 +21,7 @@
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
- return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+ return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
}
#define TICK_MAX (0xffffffff)
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5pc100/include/mach/timex.h
index 2a425ed..47ffb17 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s5pc100/include/mach/timex.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
new file mode 100644
index 0000000..be9df79
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xe0000000UL)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 0000000..af33a1a
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,40 @@
+# arch/arm/mach-s5pv210/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV210/S5PC110
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+ bool
+ select PLAT_S5P
+ help
+ Enable S5PV210 CPU support
+
+choice
+ prompt "Select machine type"
+ depends on ARCH_S5PV210
+ default MACH_SMDKV210
+
+config MACH_SMDKV210
+ bool "SMDKV210"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKV210
+
+config MACH_SMDKC110
+ bool "SMDKC110"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKC110
+ S5PC110(MCP) is one of package option of S5PV210
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 0000000..8ebf51c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s5pv210/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PV210 system
+
+obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
+obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
new file mode 100644
index 0000000..ccccae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -0,0 +1,454 @@
+/* linux/arch/arm/mach-s5pv210/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pv210.h>
+
+static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
+static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable);
+}
+
+static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable);
+}
+
+static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clk clk_h200 = {
+ .name = "hclk200",
+ .id = -1,
+};
+
+static struct clk clk_h100 = {
+ .name = "hclk100",
+ .id = -1,
+};
+
+static struct clk clk_h166 = {
+ .name = "hclk166",
+ .id = -1,
+};
+
+static struct clk clk_h133 = {
+ .name = "hclk133",
+ .id = -1,
+};
+
+static struct clk clk_p100 = {
+ .name = "pclk100",
+ .id = -1,
+};
+
+static struct clk clk_p83 = {
+ .name = "pclk83",
+ .id = -1,
+};
+
+static struct clk clk_p66 = {
+ .name = "pclk66",
+ .id = -1,
+};
+
+static struct clk *sys_clks[] = {
+ &clk_h200,
+ &clk_h100,
+ &clk_h166,
+ &clk_h133,
+ &clk_p100,
+ &clk_p83,
+ &clk_p66
+};
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "rot",
+ .id = -1,
+ .parent = &clk_h166,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1<<29),
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<17),
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h166,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<0),
+ }, {
+ .name = "cfcon",
+ .id = 0,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<25),
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<17),
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<18),
+ }, {
+ .name = "hsmmc",
+ .id = 3,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<19),
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<22),
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<15),
+ }, {
+ .name = "i2c",
+ .id = 0,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<7),
+ }, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<8),
+ }, {
+ .name = "i2c",
+ .id = 2,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<9),
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<12),
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<13),
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<14),
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<23),
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<24),
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<21),
+ }, {
+ .name = "i2s_v50",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<4),
+ }, {
+ .name = "i2s_v32",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<4),
+ }, {
+ .name = "i2s_v32",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<4),
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<7),
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<8),
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<9),
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<10),
+ },
+};
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_uart_list[] = {
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = (1<<17),
+ .enable = s5pv210_clk_ip3_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+ }
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pv210_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long hclk200;
+ unsigned long hclk166;
+ unsigned long hclk133;
+ unsigned long pclk100;
+ unsigned long pclk83;
+ unsigned long pclk66;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned int ptr;
+ u32 clkdiv0, clkdiv1;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+ clkdiv1 = __raw_readl(S5P_CLK_DIV1);
+
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+ __func__, clkdiv0, clkdiv1);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+ epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+ printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
+ apll, mpll, epll);
+
+ armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
+ if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
+ hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+ else
+ hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+
+ if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) {
+ hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+ hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+ } else
+ hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+
+ if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) {
+ hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+ hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+ } else
+ hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+
+ pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100);
+ pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
+ pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
+
+ printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
+ HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+ armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+
+ clk_f.rate = armclk;
+ clk_h.rate = hclk133;
+ clk_p.rate = pclk66;
+ clk_p66.rate = pclk66;
+ clk_p83.rate = pclk83;
+ clk_h133.rate = hclk133;
+ clk_h166.rate = hclk166;
+ clk_h200.rate = hclk200;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_mout_epll.clk,
+ &clk_mout_mpll.clk,
+};
+
+void __init s5pv210_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register system clocks\n");
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
new file mode 100644
index 0000000..0e0f8fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -0,0 +1,126 @@
+/* linux/arch/arm/mach-s5pv210/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5pv210.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pv210_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5PV210_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC3,
+ .pfn = __phys_to_pfn(S5PV210_PA_VIC3),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV210_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void s5pv210_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/* s5pv210_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pv210_map_io(void)
+{
+ iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+}
+
+void __init s5pv210_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5pv210_register_clocks();
+ s5pv210_setup_clocks();
+}
+
+void __init s5pv210_init_irq(void)
+{
+ u32 vic[4]; /* S5PV210 supports 4 VIC */
+
+ /* All the VICs are fully populated. */
+ vic[0] = ~0;
+ vic[1] = ~0;
+ vic[2] = ~0;
+ vic[3] = ~0;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5pv210_sysclass = {
+ .name = "s5pv210-core",
+};
+
+static struct sys_device s5pv210_sysdev = {
+ .cls = &s5pv210_sysclass,
+};
+
+static int __init s5pv210_core_init(void)
+{
+ return sysdev_class_register(&s5pv210_sysclass);
+}
+
+core_initcall(s5pv210_core_init);
+
+int __init s5pv210_init(void)
+{
+ printk(KERN_INFO "S5PV210: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5pv210_idle;
+
+ return sysdev_register(&s5pv210_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
similarity index 75%
copy from arch/arm/mach-s3c6400/include/mach/debug-macro.S
copy to arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 5c88875..7872f5c 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -25,12 +25,15 @@
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
- ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
/* include the reset of the code which will do the work, we're only
* compiling for a single cpu processor type so the default of s3c2440
* will be fine with us.
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
new file mode 100644
index 0000000..3aa41ac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S5P_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic3
+ addeq \tmp, \base, #(VA_VIC3 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
new file mode 100644
index 0000000..533b020
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -0,0 +1,129 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PV210_GPIO_A0_NR (8)
+#define S5PV210_GPIO_A1_NR (4)
+#define S5PV210_GPIO_B_NR (8)
+#define S5PV210_GPIO_C0_NR (5)
+#define S5PV210_GPIO_C1_NR (5)
+#define S5PV210_GPIO_D0_NR (4)
+#define S5PV210_GPIO_D1_NR (6)
+#define S5PV210_GPIO_E0_NR (8)
+#define S5PV210_GPIO_E1_NR (5)
+#define S5PV210_GPIO_F0_NR (8)
+#define S5PV210_GPIO_F1_NR (8)
+#define S5PV210_GPIO_F2_NR (8)
+#define S5PV210_GPIO_F3_NR (6)
+#define S5PV210_GPIO_G0_NR (7)
+#define S5PV210_GPIO_G1_NR (7)
+#define S5PV210_GPIO_G2_NR (7)
+#define S5PV210_GPIO_G3_NR (7)
+#define S5PV210_GPIO_H0_NR (8)
+#define S5PV210_GPIO_H1_NR (8)
+#define S5PV210_GPIO_H2_NR (8)
+#define S5PV210_GPIO_H3_NR (8)
+#define S5PV210_GPIO_I_NR (7)
+#define S5PV210_GPIO_J0_NR (8)
+#define S5PV210_GPIO_J1_NR (6)
+#define S5PV210_GPIO_J2_NR (8)
+#define S5PV210_GPIO_J3_NR (8)
+#define S5PV210_GPIO_J4_NR (5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PV210_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5PV210_GPIO_A0_START = 0,
+ S5PV210_GPIO_A1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
+ S5PV210_GPIO_B_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
+ S5PV210_GPIO_C0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
+ S5PV210_GPIO_C1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
+ S5PV210_GPIO_D0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
+ S5PV210_GPIO_D1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
+ S5PV210_GPIO_E0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
+ S5PV210_GPIO_E1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
+ S5PV210_GPIO_F0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
+ S5PV210_GPIO_F1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
+ S5PV210_GPIO_F2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
+ S5PV210_GPIO_F3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
+ S5PV210_GPIO_G0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
+ S5PV210_GPIO_G1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
+ S5PV210_GPIO_G2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
+ S5PV210_GPIO_G3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
+ S5PV210_GPIO_H0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
+ S5PV210_GPIO_H1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
+ S5PV210_GPIO_H2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
+ S5PV210_GPIO_H3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
+ S5PV210_GPIO_I_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
+ S5PV210_GPIO_J0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
+ S5PV210_GPIO_J1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
+ S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
+ S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
+ S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+};
+
+/* S5PV210 GPIO number definitions */
+#define S5PV210_GPA0(_nr) (S5PV210_GPIO_A0_START + (_nr))
+#define S5PV210_GPA1(_nr) (S5PV210_GPIO_A1_START + (_nr))
+#define S5PV210_GPB(_nr) (S5PV210_GPIO_B_START + (_nr))
+#define S5PV210_GPC0(_nr) (S5PV210_GPIO_C0_START + (_nr))
+#define S5PV210_GPC1(_nr) (S5PV210_GPIO_C1_START + (_nr))
+#define S5PV210_GPD0(_nr) (S5PV210_GPIO_D0_START + (_nr))
+#define S5PV210_GPD1(_nr) (S5PV210_GPIO_D1_START + (_nr))
+#define S5PV210_GPE0(_nr) (S5PV210_GPIO_E0_START + (_nr))
+#define S5PV210_GPE1(_nr) (S5PV210_GPIO_E1_START + (_nr))
+#define S5PV210_GPF0(_nr) (S5PV210_GPIO_F0_START + (_nr))
+#define S5PV210_GPF1(_nr) (S5PV210_GPIO_F1_START + (_nr))
+#define S5PV210_GPF2(_nr) (S5PV210_GPIO_F2_START + (_nr))
+#define S5PV210_GPF3(_nr) (S5PV210_GPIO_F3_START + (_nr))
+#define S5PV210_GPG0(_nr) (S5PV210_GPIO_G0_START + (_nr))
+#define S5PV210_GPG1(_nr) (S5PV210_GPIO_G1_START + (_nr))
+#define S5PV210_GPG2(_nr) (S5PV210_GPIO_G2_START + (_nr))
+#define S5PV210_GPG3(_nr) (S5PV210_GPIO_G3_START + (_nr))
+#define S5PV210_GPH0(_nr) (S5PV210_GPIO_H0_START + (_nr))
+#define S5PV210_GPH1(_nr) (S5PV210_GPIO_H1_START + (_nr))
+#define S5PV210_GPH2(_nr) (S5PV210_GPIO_H2_START + (_nr))
+#define S5PV210_GPH3(_nr) (S5PV210_GPIO_H3_START + (_nr))
+#define S5PV210_GPI(_nr) (S5PV210_GPIO_I_START + (_nr))
+#define S5PV210_GPJ0(_nr) (S5PV210_GPIO_J0_START + (_nr))
+#define S5PV210_GPJ1(_nr) (S5PV210_GPIO_J1_START + (_nr))
+#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr))
+#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr))
+#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr))
+
+/* the end of the S5PV210 specific gpios */
+#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END S5PV210_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
new file mode 100644
index 0000000..fada7a3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h
new file mode 100644
index 0000000..5ab9d56
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
new file mode 100644
index 0000000..62c5175
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -0,0 +1,146 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0: System, DMA, Timer */
+
+#define IRQ_EINT0 S5P_IRQ_VIC0(0)
+#define IRQ_EINT1 S5P_IRQ_VIC0(1)
+#define IRQ_EINT2 S5P_IRQ_VIC0(2)
+#define IRQ_EINT3 S5P_IRQ_VIC0(3)
+#define IRQ_EINT4 S5P_IRQ_VIC0(4)
+#define IRQ_EINT5 S5P_IRQ_VIC0(5)
+#define IRQ_EINT6 S5P_IRQ_VIC0(6)
+#define IRQ_EINT7 S5P_IRQ_VIC0(7)
+#define IRQ_EINT8 S5P_IRQ_VIC0(8)
+#define IRQ_EINT9 S5P_IRQ_VIC0(9)
+#define IRQ_EINT10 S5P_IRQ_VIC0(10)
+#define IRQ_EINT11 S5P_IRQ_VIC0(11)
+#define IRQ_EINT12 S5P_IRQ_VIC0(12)
+#define IRQ_EINT13 S5P_IRQ_VIC0(13)
+#define IRQ_EINT14 S5P_IRQ_VIC0(14)
+#define IRQ_EINT15 S5P_IRQ_VIC0(15)
+#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
+#define IRQ_BATF S5P_IRQ_VIC0(17)
+#define IRQ_MDMA S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
+#define IRQ_WDT S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
+#define IRQ_FIMC3 S5P_IRQ_VIC0(31)
+
+/* VIC1: ARM, Power, Memory, Connectivity, Storage */
+
+#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND S5P_IRQ_VIC1(7)
+#define IRQ_NFC S5P_IRQ_VIC1(8)
+#define IRQ_CFC S5P_IRQ_VIC1(9)
+#define IRQ_UART0 S5P_IRQ_VIC1(10)
+#define IRQ_UART1 S5P_IRQ_VIC1(11)
+#define IRQ_UART2 S5P_IRQ_VIC1(12)
+#define IRQ_UART3 S5P_IRQ_VIC1(13)
+#define IRQ_IIC S5P_IRQ_VIC1(14)
+#define IRQ_SPI0 S5P_IRQ_VIC1(15)
+#define IRQ_SPI1 S5P_IRQ_VIC1(16)
+#define IRQ_SPI2 S5P_IRQ_VIC1(17)
+#define IRQ_IRDA S5P_IRQ_VIC1(18)
+#define IRQ_CAN0 S5P_IRQ_VIC1(19)
+#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX S5P_IRQ_VIC1(21)
+#define IRQ_HSITX S5P_IRQ_VIC1(22)
+#define IRQ_UHOST S5P_IRQ_VIC1(23)
+#define IRQ_OTG S5P_IRQ_VIC1(24)
+#define IRQ_MSM S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
+#define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31)
+
+/* VIC2: Multimedia, Audio, Security */
+
+#define IRQ_LCD0 S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
+#define IRQ_JPEG S5P_IRQ_VIC2(8)
+#define IRQ_2D S5P_IRQ_VIC2(9)
+#define IRQ_3D S5P_IRQ_VIC2(10)
+#define IRQ_MIXER S5P_IRQ_VIC2(11)
+#define IRQ_HDMI S5P_IRQ_VIC2(12)
+#define IRQ_IIC1 S5P_IRQ_VIC2(13)
+#define IRQ_MFC S5P_IRQ_VIC2(14)
+#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 S5P_IRQ_VIC2(17)
+#define IRQ_I2S2 S5P_IRQ_VIC2(18)
+#define IRQ_AC97 S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF S5P_IRQ_VIC2(22)
+#define IRQ_ADC S5P_IRQ_VIC2(23)
+#define IRQ_PENDN S5P_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
+#define IRQ_CG S5P_IRQ_VIC2(26)
+#define IRQ_SEC S5P_IRQ_VIC2(27)
+#define IRQ_SECRX S5P_IRQ_VIC2(28)
+#define IRQ_SECTX S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
+
+/* VIC3: Etc */
+
+#define IRQ_IPC S5P_IRQ_VIC3(0)
+#define IRQ_HOSTIF S5P_IRQ_VIC3(1)
+#define IRQ_MMC3 S5P_IRQ_VIC3(2)
+#define IRQ_CEC S5P_IRQ_VIC3(3)
+#define IRQ_TSI S5P_IRQ_VIC3(4)
+#define IRQ_MDNIE0 S5P_IRQ_VIC3(5)
+#define IRQ_MDNIE1 S5P_IRQ_VIC3(6)
+#define IRQ_MDNIE2 S5P_IRQ_VIC3(7)
+#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
+#define IRQ_VIC_END S5P_IRQ_VIC3(31)
+
+#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
+
+#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S5P_EINT(x)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT(31) + 1)
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
new file mode 100644
index 0000000..c22694c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5PV210_PA_CHIPID (0xE0000000)
+#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+
+#define S5PV210_PA_SYSCON (0xE0100000)
+#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+
+#define S5PV210_PA_GPIO (0xE0200000)
+#define S5P_PA_GPIO S5PV210_PA_GPIO
+
+#define S5PV210_PA_IIC0 (0xE1800000)
+
+#define S5PV210_PA_TIMER (0xE2500000)
+#define S5P_PA_TIMER S5PV210_PA_TIMER
+
+#define S5PV210_PA_SYSTIMER (0xE2600000)
+
+#define S5PV210_PA_UART (0xE2900000)
+
+#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00)
+
+#define S5P_SZ_UART SZ_256
+
+#define S5PV210_PA_SROMC (0xE8000000)
+
+#define S5PV210_PA_VIC0 (0xF2000000)
+#define S5P_PA_VIC0 S5PV210_PA_VIC0
+
+#define S5PV210_PA_VIC1 (0xF2100000)
+#define S5P_PA_VIC1 S5PV210_PA_VIC1
+
+#define S5PV210_PA_VIC2 (0xF2200000)
+#define S5P_PA_VIC2 S5PV210_PA_VIC2
+
+#define S5PV210_PA_VIC3 (0xF2300000)
+#define S5P_PA_VIC3 S5PV210_PA_VIC3
+
+#define S5PV210_PA_SDRAM (0x20000000)
+#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5PV210_PA_UART
+#define S3C_PA_IIC S5PV210_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
new file mode 100644
index 0000000..379117e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
new file mode 100644
index 0000000..69027fe
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5PV210 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
new file mode 100644
index 0000000..e56e0e4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -0,0 +1,169 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x108)
+#define S5P_EPLL_CON S5P_CLKREG(0x110)
+#define S5P_VPLL_CON S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4 S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5 S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6 S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
+#define S5P_CLK_DIV7 S5P_CLKREG(0x31C)
+
+#define S5P_CLKGATE_MAIN0 S5P_CLKREG(0x400)
+#define S5P_CLKGATE_MAIN1 S5P_CLKREG(0x404)
+#define S5P_CLKGATE_MAIN2 S5P_CLKREG(0x408)
+
+#define S5P_CLKGATE_PERI0 S5P_CLKREG(0x420)
+#define S5P_CLKGATE_PERI1 S5P_CLKREG(0x424)
+
+#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x440)
+#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x444)
+#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)
+#define S5P_CLKGATE_IP1 S5P_CLKREG(0x464)
+#define S5P_CLKGATE_IP2 S5P_CLKREG(0x468)
+#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
+#define S5P_CLKGATE_IP4 S5P_CLKREG(0x470)
+
+#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x480)
+#define S5P_CLKGATE_BUS0 S5P_CLKREG(0x484)
+#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488)
+#define S5P_CLK_OUT S5P_CLKREG(0x500)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_MASK (0x1<<16)
+#define S5P_CLKSRC0_MUX166_MASK (0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK (0x1<<24)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT (0)
+#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT (4)
+#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT (8)
+#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT (12)
+#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT (16)
+#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT (20)
+#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT (24)
+#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT (28)
+#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* Registers related to power management */
+#define S5P_PWR_CFG S5P_CLKREG(0xC000)
+#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004)
+#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008)
+#define S5P_PWR_MODE S5P_CLKREG(0xC00C)
+#define S5P_NORMAL_CFG S5P_CLKREG(0xC010)
+#define S5P_IDLE_CFG S5P_CLKREG(0xC020)
+#define S5P_STOP_CFG S5P_CLKREG(0xC030)
+#define S5P_STOP_MEM_CFG S5P_CLKREG(0xC034)
+#define S5P_SLEEP_CFG S5P_CLKREG(0xC040)
+
+#define S5P_OSC_FREQ S5P_CLKREG(0xC100)
+#define S5P_OSC_STABLE S5P_CLKREG(0xC104)
+#define S5P_PWR_STABLE S5P_CLKREG(0xC108)
+#define S5P_MTC_STABLE S5P_CLKREG(0xC110)
+#define S5P_CLAMP_STABLE S5P_CLKREG(0xC114)
+
+#define S5P_WAKEUP_STAT S5P_CLKREG(0xC200)
+#define S5P_BLK_PWR_STAT S5P_CLKREG(0xC204)
+
+#define S5P_OTHERS S5P_CLKREG(0xE000)
+#define S5P_OM_STAT S5P_CLKREG(0xE100)
+#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C)
+#define S5P_DAC_CONTROL S5P_CLKREG(0xE810)
+
+#define S5P_INFORM0 S5P_CLKREG(0xF000)
+#define S5P_INFORM1 S5P_CLKREG(0xF004)
+#define S5P_INFORM2 S5P_CLKREG(0xF008)
+#define S5P_INFORM3 S5P_CLKREG(0xF00C)
+#define S5P_INFORM4 S5P_CLKREG(0xF010)
+#define S5P_INFORM5 S5P_CLKREG(0xF014)
+#define S5P_INFORM6 S5P_CLKREG(0xF018)
+#define S5P_INFORM7 S5P_CLKREG(0xF01C)
+
+#define S5P_RST_STAT S5P_CLKREG(0xA000)
+#define S5P_OSC_CON S5P_CLKREG(0x8000)
+#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200)
+#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204)
+#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814)
+
+#define S5P_IDLE_CFG_TL_MASK (3 << 30)
+#define S5P_IDLE_CFG_TM_MASK (3 << 28)
+#define S5P_IDLE_CFG_TL_ON (2 << 30)
+#define S5P_IDLE_CFG_TM_ON (2 << 28)
+#define S5P_IDLE_CFG_DIDLE (1 << 0)
+
+#define S5P_CFG_WFI_CLEAN (~(3 << 8))
+#define S5P_CFG_WFI_IDLE (1 << 8)
+#define S5P_CFG_WFI_STOP (2 << 8)
+#define S5P_CFG_WFI_SLEEP (3 << 8)
+
+#define S5P_OTHER_SYS_INT 24
+#define S5P_OTHER_STA_TYPE 23
+#define S5P_OTHER_SYSC_INTOFF (1 << 0)
+#define STA_TYPE_EXPON 0
+#define STA_TYPE_SFR 1
+
+#define S5P_PWR_STA_EXP_SCALE 0
+#define S5P_PWR_STA_CNT 4
+
+#define S5P_PWR_STABLE_COUNT 85500
+
+#define S5P_SLEEP_CFG_OSC_EN (1 << 0)
+#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1)
+
+/* OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28)
+
+/* MIPI */
+#define S5P_MIPI_DPHY_EN (3)
+
+/* S5P_DAC_CONTROL */
+#define S5P_DAC_ENABLE (1)
+#define S5P_DAC_DISABLE (0)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
new file mode 100644
index 0000000..5c3b104
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
new file mode 100644
index 0000000..1ca04d5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
new file mode 100644
index 0000000..7993b36
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5PV210 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
similarity index 66%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5pv210/include/mach/timex.h
index 2a425ed..73dc854 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5pv210/include/mach/timex.h
@@ -1,9 +1,14 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV210 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,7 +16,7 @@
*/
#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
* a variable is useless. It seems as long as we make our timers an
@@ -19,8 +24,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
new file mode 100644
index 0000000..08ff2fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
new file mode 100644
index 0000000..58f515e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * S5PV210 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
new file mode 100644
index 0000000..4865ae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pv210.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+ [0] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5pv210_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
new file mode 100644
index 0000000..ab4869d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdkc110_devices[] __initdata = {
+};
+
+static void __init smdkc110_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkc110_machine_init(void)
+{
+ platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
+}
+
+MACHINE_START(SMDKC110, "SMDKC110")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = smdkc110_map_io,
+ .init_machine = smdkc110_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
new file mode 100644
index 0000000..a278832
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdkv210_devices[] __initdata = {
+};
+
+static void __init smdkv210_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkv210_machine_init(void)
+{
+ platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+}
+
+MACHINE_START(SMDKV210, "SMDKV210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = smdkv210_map_io,
+ .init_machine = smdkv210_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 051ec0f..259cb2c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -51,6 +51,10 @@
},
};
+static struct sa1111_platform_data sa1111_info = {
+ .irq_base = IRQ_BOARD_END,
+};
+
static u64 sa1111_dmamask = 0xffffffffUL;
static struct platform_device sa1111_device = {
@@ -59,6 +63,7 @@
.dev = {
.dma_mask = &sa1111_dmamask,
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &sa1111_info,
},
.num_resources = ARRAY_SIZE(sa1111_resources),
.resource = sa1111_resources,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 9982c5c..5d5f330 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -234,6 +234,10 @@
},
};
+static struct locomo_platform_data locomo_info = {
+ .irq_base = IRQ_BOARD_START,
+};
+
struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 71a0b3f..52acda7 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -72,13 +72,6 @@
#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
-#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
-
/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13)
#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index ae81f80..8c8845b 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,93 +68,17 @@
#define IRQ_BOARD_START 49
#define IRQ_BOARD_END 65
-#define IRQ_SA1111_START (IRQ_BOARD_END)
-#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
-#define SSPXMTINT (IRQ_BOARD_END + 24)
-#define SSPRCVINT (IRQ_BOARD_END + 25)
-#define SSPROR (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
-#define AUDTFSR (IRQ_BOARD_END + 36)
-#define AUDRFSR (IRQ_BOARD_END + 37)
-#define AUDTUR (IRQ_BOARD_END + 38)
-#define AUDROR (IRQ_BOARD_END + 39)
-#define AUDDTS (IRQ_BOARD_END + 40)
-#define AUDRDD (IRQ_BOARD_END + 41)
-#define AUDSTO (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR (IRQ_BOARD_END + 43)
-#define IRQ_HCIM (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
-
/*
* Figure out the MAX IRQ number.
*
* If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
* Otherwise, we have the standard IRQs only.
*/
#ifdef CONFIG_SA1111
-#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS (IRQ_BOARD_END + 55)
+#elif defined(CONFIG_SHARPSL_LOCOMO)
+#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
@@ -166,10 +90,3 @@
#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0)
#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1)
#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 13ebd2d..d3ec620 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -208,6 +208,10 @@
},
};
+static struct sa1111_platform_data sa1111_info = {
+ .irq_base = IRQ_BOARD_END,
+};
+
static u64 sa1111_dmamask = 0xffffffffUL;
static struct platform_device sa1111_device = {
@@ -216,6 +220,7 @@
.dev = {
.dma_mask = &sa1111_dmamask,
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &sa1111_info,
},
.num_resources = ARRAY_SIZE(sa1111_resources),
.resource = sa1111_resources,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6ccd175..0b505d9 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -241,6 +241,10 @@
},
};
+static struct sa1111_platform_data sa1111_info = {
+ .irq_base = IRQ_BOARD_END,
+};
+
static u64 sa1111_dmamask = 0xffffffffUL;
static struct platform_device sa1111_device = {
@@ -249,6 +253,7 @@
.dev = {
.dma_mask = &sa1111_dmamask,
.coherent_dma_mask = 0xffffffff,
+ .platform_data = &sa1111_info,
},
.num_resources = ARRAY_SIZE(sa1111_resources),
.resource = sa1111_resources,
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index b9cbb56..74b6e0e 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -35,14 +35,12 @@
static int
sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
{
- unsigned long flags, next, oscr;
+ unsigned long next, oscr;
- raw_local_irq_save(flags);
OIER |= OIER_E0;
next = OSCR + delta;
OSMR0 = next;
oscr = OSCR;
- raw_local_irq_restore(flags);
return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
}
@@ -50,16 +48,12 @@
static void
sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
{
- unsigned long flags;
-
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- raw_local_irq_save(flags);
OIER &= ~OIER_E0;
OSSR = OSSR_M0;
- raw_local_irq_restore(flags);
break;
case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
new file mode 100644
index 0000000..aeceb9b
--- /dev/null
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -0,0 +1,84 @@
+if ARCH_SHMOBILE
+
+comment "SH-Mobile System Type"
+
+config ARCH_SH7367
+ bool "SH-Mobile G3 (SH7367)"
+ select CPU_V6
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7377
+ bool "SH-Mobile G4 (SH7377)"
+ select CPU_V7
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7372
+ bool "SH-Mobile AP4 (SH7372)"
+ select CPU_V7
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+
+comment "SH-Mobile Board Type"
+
+config MACH_G3EVM
+ bool "G3EVM board"
+ depends on ARCH_SH7367
+ select ARCH_REQUIRE_GPIOLIB
+
+config MACH_G4EVM
+ bool "G4EVM board"
+ depends on ARCH_SH7377
+ select ARCH_REQUIRE_GPIOLIB
+
+config MACH_AP4EVB
+ bool "AP4EVB board"
+ depends on ARCH_SH7372
+ select ARCH_REQUIRE_GPIOLIB
+
+comment "SH-Mobile System Configuration"
+
+menu "Memory configuration"
+
+config MEMORY_START
+ hex "Physical memory start address"
+ default "0x50000000" if MACH_G3EVM
+ default "0x40000000" if MACH_G4EVM
+ default "0x40000000" if MACH_AP4EVB
+ default "0x00000000"
+ ---help---
+ Tweak this only when porting to a new machine which does not
+ already have a defconfig. Changing it from the known correct
+ value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+ hex "Physical memory size"
+ default "0x08000000" if MACH_G3EVM
+ default "0x08000000" if MACH_G4EVM
+ default "0x10000000" if MACH_AP4EVB
+ default "0x04000000"
+ help
+ This sets the default memory size assumed by your kernel. It can
+ be overridden as normal by the 'mem=' argument on the kernel command
+ line.
+
+endmenu
+
+menu "Timer and clock configuration"
+
+config SH_TIMER_CMT
+ bool "CMT timer driver"
+ default y
+ help
+ This enables build of the CMT timer driver.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
new file mode 100644
index 0000000..6d385d3
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common objects
+obj-y := timer.o console.o
+
+# CPU objects
+obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
+obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7367.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7367.o intc-sh7372.o
+
+# Pinmux setup
+pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o
+pfc-$(CONFIG_ARCH_SH7377) := pfc-sh7377.o
+pfc-$(CONFIG_ARCH_SH7372) := pfc-sh7372.o
+obj-$(CONFIG_GENERIC_GPIO) += $(pfc-y)
+
+# Board objects
+obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o
+obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o
+obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
new file mode 100644
index 0000000..1c08ee9
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -0,0 +1,9 @@
+__ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_MEMORY_START) + 0x8000]')
+
+ zreladdr-y := $(__ZRELADDR)
+
+# Unsupported legacy stuff
+#
+#params_phys-y (Instead: Pass atags pointer in r2)
+#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
new file mode 100644
index 0000000..a0463d9
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -0,0 +1,301 @@
+/*
+ * AP4EVB board support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/common.h>
+#include <mach/sh7372.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/*
+ * Address Interface BusWidth note
+ * ------------------------------------------------------------------
+ * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
+ * 0x0800_0000 user area -
+ * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
+ * 0x1400_0000 Ether (LAN9220) 16bit
+ * 0x1600_0000 user area - cannot use with NAND
+ * 0x1800_0000 user area -
+ * 0x1A00_0000 -
+ * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
+ */
+
+/*
+ * NOR Flash ROM
+ *
+ * SW1 | SW2 | SW7 | NOR Flash ROM
+ * bit1 | bit1 bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ * OFF | ON OFF | ON | Area 0
+ * OFF | ON OFF | OFF | Area 4
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ * SW1 | SW2 | SW7 | NAND Flash ROM
+ * bit1 | bit1 bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ * OFF | ON OFF | ON | FCE 0
+ * OFF | ON OFF | OFF | FCE 1
+ */
+
+/*
+ * SMSC 9220
+ *
+ * SW1 SMSC 9220
+ * -----------------------
+ * ON access disable
+ * OFF access enable
+ */
+
+/*
+ * KEYSC
+ *
+ * SW43 KEYSC
+ * -------------------------
+ * ON enable
+ * OFF disable
+ */
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel_ro",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = 0x08000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+/* SMSC 9220 */
+static struct resource smc911x_resources[] = {
+ {
+ .start = 0x14000000,
+ .end = 0x16000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 6,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+/* KEYSC (Needs SW43 set to ON) */
+static struct sh_keysc_info keysc_info = {
+ .mode = SH_KEYSC_MODE_1,
+ .scan_timing = 3,
+ .delay = 2500,
+ .keycodes = {
+ KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+ KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
+ KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+ KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+ KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+ },
+};
+
+static struct resource keysc_resources[] = {
+ [0] = {
+ .name = "KEYSC",
+ .start = 0xe61b0000,
+ .end = 0xe61b0063,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 79,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device keysc_device = {
+ .name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
+ .num_resources = ARRAY_SIZE(keysc_resources),
+ .resource = keysc_resources,
+ .dev = {
+ .platform_data = &keysc_info,
+ },
+};
+
+static struct platform_device *ap4evb_devices[] __initdata = {
+ &nor_flash_device,
+ &smc911x_device,
+ &keysc_device,
+};
+
+static struct map_desc ap4evb_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init ap4evb_map_io(void)
+{
+ iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+
+ /* setup early devices, clocks and console here as well */
+ sh7372_add_early_devices();
+ sh7367_clock_init(); /* use g3 clocks for now */
+ shmobile_setup_console();
+}
+
+static void __init ap4evb_init(void)
+{
+ sh7372_pinmux_init();
+
+ /* enable SCIFA0 */
+ gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+ /* enable SMSC911X */
+ gpio_request(GPIO_FN_CS5A, NULL);
+ gpio_request(GPIO_FN_IRQ6_39, NULL);
+
+ /* enable LED 1 - 4 */
+ gpio_request(GPIO_PORT185, NULL);
+ gpio_request(GPIO_PORT186, NULL);
+ gpio_request(GPIO_PORT187, NULL);
+ gpio_request(GPIO_PORT188, NULL);
+ gpio_direction_output(GPIO_PORT185, 1);
+ gpio_direction_output(GPIO_PORT186, 1);
+ gpio_direction_output(GPIO_PORT187, 1);
+ gpio_direction_output(GPIO_PORT188, 1);
+ gpio_export(GPIO_PORT185, 0);
+ gpio_export(GPIO_PORT186, 0);
+ gpio_export(GPIO_PORT187, 0);
+ gpio_export(GPIO_PORT188, 0);
+
+ /* enable Debug switch (S6) */
+ gpio_request(GPIO_PORT32, NULL);
+ gpio_request(GPIO_PORT33, NULL);
+ gpio_request(GPIO_PORT34, NULL);
+ gpio_request(GPIO_PORT35, NULL);
+ gpio_direction_input(GPIO_PORT32);
+ gpio_direction_input(GPIO_PORT33);
+ gpio_direction_input(GPIO_PORT34);
+ gpio_direction_input(GPIO_PORT35);
+ gpio_export(GPIO_PORT32, 0);
+ gpio_export(GPIO_PORT33, 0);
+ gpio_export(GPIO_PORT34, 0);
+ gpio_export(GPIO_PORT35, 0);
+
+ /* enable KEYSC */
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT4, NULL);
+ gpio_request(GPIO_FN_KEYIN0_136, NULL);
+ gpio_request(GPIO_FN_KEYIN1_135, NULL);
+ gpio_request(GPIO_FN_KEYIN2_134, NULL);
+ gpio_request(GPIO_FN_KEYIN3_133, NULL);
+ gpio_request(GPIO_FN_KEYIN4, NULL);
+
+ sh7372_add_standard_devices();
+
+ platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+}
+
+MACHINE_START(AP4EVB, "ap4evb")
+ .phys_io = 0xe6000000,
+ .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc,
+ .map_io = ap4evb_map_io,
+ .init_irq = sh7372_init_irq,
+ .init_machine = ap4evb_init,
+ .timer = &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
new file mode 100644
index 0000000..f36c9a9
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -0,0 +1,211 @@
+/*
+ * G3EVM board support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel_ro",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = 0x08000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+ if (!power) /* only power-on supported for now */
+ return;
+
+ /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+ __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+ .on_chip = 1,
+ .port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+ [0] = {
+ .name = "USBHS",
+ .start = 0xe6890000,
+ .end = 0xe68900e5,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &usb_host_data,
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usb_host_resources),
+ .resource = usb_host_resources,
+};
+
+static struct platform_device *g3evm_devices[] __initdata = {
+ &nor_flash_device,
+ &usb_host_device,
+};
+
+static struct map_desc g3evm_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init g3evm_map_io(void)
+{
+ iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+
+ /* setup early devices, clocks and console here as well */
+ sh7367_add_early_devices();
+ sh7367_clock_init();
+ shmobile_setup_console();
+}
+
+static void __init g3evm_init(void)
+{
+ sh7367_pinmux_init();
+
+ /* Lit DS4 LED */
+ gpio_request(GPIO_PORT22, NULL);
+ gpio_direction_output(GPIO_PORT22, 1);
+ gpio_export(GPIO_PORT22, 0);
+
+ /* Lit DS8 LED */
+ gpio_request(GPIO_PORT23, NULL);
+ gpio_direction_output(GPIO_PORT23, 1);
+ gpio_export(GPIO_PORT23, 0);
+
+ /* Lit DS3 LED */
+ gpio_request(GPIO_PORT24, NULL);
+ gpio_direction_output(GPIO_PORT24, 1);
+ gpio_export(GPIO_PORT24, 0);
+
+ /* SCIFA1 */
+ gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+ gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
+ gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
+
+ /* USBHS */
+ gpio_request(GPIO_FN_VBUS0, NULL);
+ gpio_request(GPIO_FN_PWEN, NULL);
+ gpio_request(GPIO_FN_OVCN, NULL);
+ gpio_request(GPIO_FN_OVCN2, NULL);
+ gpio_request(GPIO_FN_EXTLP, NULL);
+ gpio_request(GPIO_FN_IDIN, NULL);
+
+ /* enable clock in SYMSTPCR2 */
+ __raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
+
+ /* setup USB phy */
+ __raw_writew(0x0300, 0xe605810a); /* USBCR1 */
+ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
+ __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */
+ __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */
+
+ sh7367_add_standard_devices();
+
+ platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
+}
+
+MACHINE_START(G3EVM, "g3evm")
+ .phys_io = 0xe6000000,
+ .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc,
+ .map_io = g3evm_map_io,
+ .init_irq = sh7367_init_irq,
+ .init_machine = g3evm_init,
+ .timer = &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
new file mode 100644
index 0000000..5acd623
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -0,0 +1,211 @@
+/*
+ * G4EVM board support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel_ro",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = 0x08000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+ if (!power) /* only power-on supported for now */
+ return;
+
+ /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+ __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+ .on_chip = 1,
+ .port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+ [0] = {
+ .name = "USBHS",
+ .start = 0xe6890000,
+ .end = 0xe68900e5,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &usb_host_data,
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usb_host_resources),
+ .resource = usb_host_resources,
+};
+
+static struct platform_device *g4evm_devices[] __initdata = {
+ &nor_flash_device,
+ &usb_host_device,
+};
+
+static struct map_desc g4evm_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init g4evm_map_io(void)
+{
+ iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+
+ /* setup early devices, clocks and console here as well */
+ sh7377_add_early_devices();
+ sh7367_clock_init(); /* use g3 clocks for now */
+ shmobile_setup_console();
+}
+
+static void __init g4evm_init(void)
+{
+ sh7377_pinmux_init();
+
+ /* Lit DS14 LED */
+ gpio_request(GPIO_PORT109, NULL);
+ gpio_direction_output(GPIO_PORT109, 1);
+ gpio_export(GPIO_PORT109, 1);
+
+ /* Lit DS15 LED */
+ gpio_request(GPIO_PORT110, NULL);
+ gpio_direction_output(GPIO_PORT110, 1);
+ gpio_export(GPIO_PORT110, 1);
+
+ /* Lit DS16 LED */
+ gpio_request(GPIO_PORT112, NULL);
+ gpio_direction_output(GPIO_PORT112, 1);
+ gpio_export(GPIO_PORT112, 1);
+
+ /* Lit DS17 LED */
+ gpio_request(GPIO_PORT113, NULL);
+ gpio_direction_output(GPIO_PORT113, 1);
+ gpio_export(GPIO_PORT113, 1);
+
+ /* USBHS */
+ gpio_request(GPIO_FN_VBUS_0, NULL);
+ gpio_request(GPIO_FN_PWEN, NULL);
+ gpio_request(GPIO_FN_OVCN, NULL);
+ gpio_request(GPIO_FN_OVCN2, NULL);
+ gpio_request(GPIO_FN_EXTLP, NULL);
+ gpio_request(GPIO_FN_IDIN, NULL);
+
+ /* enable clock in SMSTPCR3 */
+ __raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
+
+ /* setup USB phy */
+ __raw_writew(0x0200, 0xe605810a); /* USBCR1 */
+ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
+ __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */
+ __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */
+
+ sh7377_add_standard_devices();
+
+ platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
+}
+
+MACHINE_START(G4EVM, "g4evm")
+ .phys_io = 0xe6000000,
+ .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc,
+ .map_io = g4evm_map_io,
+ .init_irq = sh7377_init_irq,
+ .init_machine = g4evm_init,
+ .timer = &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
new file mode 100644
index 0000000..58bd54e
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -0,0 +1,96 @@
+/*
+ * Preliminary clock framework support for sh7367
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+struct clk {
+ const char *name;
+ unsigned long rate;
+};
+
+#include <asm/clkdev.h>
+
+int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk ? clk->rate : 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* a static peripheral clock for now - enough to get sh-sci working */
+static struct clk peripheral_clk = {
+ .name = "peripheral_clk",
+ .rate = 48000000,
+};
+
+/* a static rclk for now - enough to get sh_cmt working */
+static struct clk r_clk = {
+ .name = "r_clk",
+ .rate = 32768,
+};
+
+/* a static usb0 for now - enough to get r8a66597 working */
+static struct clk usb0_clk = {
+ .name = "usb0",
+};
+
+static struct clk_lookup lookups[] = {
+ {
+ .clk = &peripheral_clk,
+ }, {
+ .clk = &r_clk,
+ }, {
+ .clk = &usb0_clk,
+ }
+};
+
+void __init sh7367_clock_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+ lookups[i].con_id = lookups[i].clk->name;
+ clkdev_add(&lookups[i]);
+ }
+}
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
new file mode 100644
index 0000000..9411a5b
--- /dev/null
+++ b/arch/arm/mach-shmobile/console.c
@@ -0,0 +1,31 @@
+/*
+ * SH-Mobile Console
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
+
+void __init shmobile_setup_console(void)
+{
+ parse_early_param();
+
+ /* Let earlyprintk output early console messages */
+ early_platform_driver_probe("earlyprintk", 1, 1);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
new file mode 100644
index 0000000..36d0163
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
new file mode 100644
index 0000000..5790360
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -0,0 +1,23 @@
+#ifndef __ARCH_MACH_COMMON_H
+#define __ARCH_MACH_COMMON_H
+
+extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_console(void);
+
+extern void sh7367_init_irq(void);
+extern void sh7367_add_early_devices(void);
+extern void sh7367_add_standard_devices(void);
+extern void sh7367_clock_init(void);
+extern void sh7367_pinmux_init(void);
+
+extern void sh7377_init_irq(void);
+extern void sh7377_add_early_devices(void);
+extern void sh7377_add_standard_devices(void);
+extern void sh7377_pinmux_init(void);
+
+extern void sh7372_init_irq(void);
+extern void sh7372_add_early_devices(void);
+extern void sh7372_add_standard_devices(void);
+extern void sh7372_pinmux_init(void);
+
+#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
new file mode 100644
index 0000000..40a8c178
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
new file mode 100644
index 0000000..a285d13
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =INTFLGA
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base]
+ cmp \irqnr, #0
+ beq 1000f
+ /* intevt to irq number */
+ lsr \irqnr, \irqnr, #0x5
+ subs \irqnr, \irqnr, #16
+
+1000:
+ .endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
new file mode 100644
index 0000000..5bc6bd4
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#define ARCH_NR_GPIOS 1024
+#include <linux/sh_pfc.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
new file mode 100644
index 0000000..3f0ef19
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/hardware.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+/* INTFLGA register - used by low level interrupt code in entry-macro.S */
+#define INTFLGA 0xe6980018
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h
new file mode 100644
index 0000000..7339fe4
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/io.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
new file mode 100644
index 0000000..5179b72
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS 512
+#define NR_IRQS_LEGACY 8
+
+#define evt2irq(evt) (((evt) >> 5) - 16)
+#define irq2evt(irq) (((irq) + 16) << 5)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
new file mode 100644
index 0000000..e188183
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET UL(CONFIG_MEMORY_START)
+#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h
new file mode 100644
index 0000000..52d0de6
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7367.h
@@ -0,0 +1,332 @@
+#ifndef __ASM_SH7367_H__
+#define __ASM_SH7367_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* 49-1 -> 49-6 (GPIO) */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+ GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+ GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+ GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+ GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+ GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+ GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+ GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+ GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+ GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+ GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+ GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+ GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+ GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+ GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+ GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+ GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+ GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+ GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+ GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+ GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+ GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+ GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+ GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+ GPIO_PORT270, GPIO_PORT271, GPIO_PORT272,
+
+ /* Special Pull-up / Pull-down Functions */
+ GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU,
+ GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU,
+ GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU,
+ GPIO_FN_PORT58_KEYIN6_PU,
+
+ /* 49-1 (FN) */
+ GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2,
+ GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6,
+ GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10,
+ GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+ GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+ GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2,
+ GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20,
+ GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22,
+ GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+ GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2,
+ GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK,
+ GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD,
+ GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+ GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+ GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+
+ /* 49-2 (FN) */
+ GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0,
+ GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1,
+ GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK,
+ GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0,
+ GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1,
+ GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2,
+ GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3,
+ GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4,
+ GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5,
+ GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0,
+ GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1,
+ GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2,
+ GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC,
+ GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK,
+ GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD,
+ GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD,
+ GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3,
+ GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4,
+ GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5,
+ GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6,
+ GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1,
+ GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2,
+ GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A,
+ GPIO_FN_XTALB1L,
+ GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+ GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK,
+ GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD,
+ GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS,
+ GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS,
+ GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0,
+ GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1,
+ GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2,
+ GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3,
+ GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0,
+ GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1,
+ GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2,
+ GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3,
+ GPIO_FN_NMI, GPIO_FN_TPU4TO0,
+ GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3,
+ GPIO_FN_IRQ_TMPB,
+ GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1,
+ GPIO_FN_OVCN, GPIO_FN_MFG1_IN1,
+ GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2,
+
+ /* 49-3 (FN) */
+ GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2,
+ GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN,
+ GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1,
+ GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2,
+ GPIO_FN_SCIFA5_RXD,
+ GPIO_FN_SCIFA5_TXD,
+ GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1,
+ GPIO_FN_A0_EA0, GPIO_FN_BS,
+ GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0,
+ GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL,
+ GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2,
+ GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1,
+ GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3,
+ GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC,
+ GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4,
+ GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK,
+ GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5,
+ GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0,
+ GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1,
+ GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC,
+ GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2,
+ GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0,
+ GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3,
+ GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1,
+ GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4,
+ GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD,
+ GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5,
+ GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL,
+ GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2,
+ GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5,
+ GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8,
+ GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11,
+ GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13,
+ GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15,
+ GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1,
+ GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A,
+ GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD,
+ GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE,
+ GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO,
+ GPIO_FN_NBRSTOUT, GPIO_FN_NBRST,
+
+ /* 49-4 (FN) */
+ GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD,
+ GPIO_FN_VIO_VD, GPIO_FN_VIO_HD,
+ GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
+ GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
+ GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
+ GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
+ GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
+ GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
+ GPIO_FN_VIO_CKO,
+ GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2,
+ GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0,
+ GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1,
+ GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2,
+ GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3,
+ GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0,
+ GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2,
+ GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1,
+ GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1,
+ GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2,
+ GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1,
+ GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3,
+ GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1,
+ GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4,
+ GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2,
+ GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5,
+ GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2,
+ GPIO_FN_LCDD6, GPIO_FN_DV_D6,
+ GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2,
+ GPIO_FN_LCDD7, GPIO_FN_DV_D7,
+ GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+ GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16,
+ GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17,
+ GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18,
+ GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19,
+ GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20,
+ GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21,
+ GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22,
+ GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23,
+ GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24,
+ GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25,
+ GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK,
+ GPIO_FN_D26, GPIO_FN_ED26,
+ GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC,
+ GPIO_FN_D27, GPIO_FN_ED27,
+ GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0,
+ GPIO_FN_D28, GPIO_FN_ED28,
+ GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1,
+ GPIO_FN_D29, GPIO_FN_ED29,
+ GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1,
+ GPIO_FN_D30, GPIO_FN_ED30,
+ GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2,
+ GPIO_FN_D31, GPIO_FN_ED31,
+ GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD,
+ GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC,
+
+
+ /* 49-5 (FN) */
+ GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+ GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK,
+ GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI,
+ GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD,
+ GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD,
+ GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3,
+ GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7,
+ GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR,
+ GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR,
+ GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0,
+ GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1,
+ GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON,
+ GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS,
+ GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD,
+ GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2,
+ GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2,
+ GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD,
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2,
+ GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+ GPIO_FN_MSIOF1_SS2,
+ GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT,
+ GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
+ GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3,
+ GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3,
+ GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1,
+ GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK,
+ GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC,
+ GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD,
+ GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW,
+ GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1,
+ GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1,
+ GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2,
+ GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD,
+ GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+ GPIO_FN_SDHICLK0, GPIO_FN_TCK2,
+ GPIO_FN_SDHICD0,
+ GPIO_FN_SDHID0_0, GPIO_FN_TMS2,
+ GPIO_FN_SDHID0_1, GPIO_FN_TDO2,
+ GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+ GPIO_FN_SDHID0_3, GPIO_FN_RTCK2,
+
+ /* 49-6 (FN) */
+ GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+ GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+ GPIO_FN_SDHICLK1, GPIO_FN_TCK3,
+ GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2,
+ GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3,
+ GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2,
+ GPIO_FN_TS_SDAT2, GPIO_FN_TDO3,
+ GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2,
+ GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+ GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2,
+ GPIO_FN_TS_SCK2, GPIO_FN_RTCK3,
+ GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+ GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK,
+ GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD,
+ GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS,
+ GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD,
+ GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS,
+ GPIO_FN_SDHICMD2,
+ GPIO_FN_RESETOUTS,
+ GPIO_FN_DIVLOCK,
+};
+
+#endif /* __ASM_SH7367_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
new file mode 100644
index 0000000..dc34f00
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH7372_H__
+#define __ASM_SH7372_H__
+
+/*
+ * Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* PORT */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+ GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+ GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+ GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+ GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+ GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+ GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+ GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+ GPIO_PORT190,
+
+ /* IRQ */
+ GPIO_FN_IRQ0_6, /* PORT 6 */
+ GPIO_FN_IRQ0_162, /* PORT 162 */
+ GPIO_FN_IRQ1, /* PORT 12 */
+ GPIO_FN_IRQ2_4, /* PORT 4 */
+ GPIO_FN_IRQ2_5, /* PORT 5 */
+ GPIO_FN_IRQ3_8, /* PORT 8 */
+ GPIO_FN_IRQ3_16, /* PORT 16 */
+ GPIO_FN_IRQ4_17, /* PORT 17 */
+ GPIO_FN_IRQ4_163, /* PORT 163 */
+ GPIO_FN_IRQ5, /* PORT 18 */
+ GPIO_FN_IRQ6_39, /* PORT 39 */
+ GPIO_FN_IRQ6_164, /* PORT 164 */
+ GPIO_FN_IRQ7_40, /* PORT 40 */
+ GPIO_FN_IRQ7_167, /* PORT 167 */
+ GPIO_FN_IRQ8_41, /* PORT 41 */
+ GPIO_FN_IRQ8_168, /* PORT 168 */
+ GPIO_FN_IRQ9_42, /* PORT 42 */
+ GPIO_FN_IRQ9_169, /* PORT 169 */
+ GPIO_FN_IRQ10, /* PORT 65 */
+ GPIO_FN_IRQ11, /* PORT 67 */
+ GPIO_FN_IRQ12_80, /* PORT 80 */
+ GPIO_FN_IRQ12_137, /* PORT 137 */
+ GPIO_FN_IRQ13_81, /* PORT 81 */
+ GPIO_FN_IRQ13_145, /* PORT 145 */
+ GPIO_FN_IRQ14_82, /* PORT 82 */
+ GPIO_FN_IRQ14_146, /* PORT 146 */
+ GPIO_FN_IRQ15_83, /* PORT 83 */
+ GPIO_FN_IRQ15_147, /* PORT 147 */
+ GPIO_FN_IRQ16_84, /* PORT 84 */
+ GPIO_FN_IRQ16_170, /* PORT 170 */
+ GPIO_FN_IRQ17, /* PORT 85 */
+ GPIO_FN_IRQ18, /* PORT 86 */
+ GPIO_FN_IRQ19, /* PORT 87 */
+ GPIO_FN_IRQ20, /* PORT 92 */
+ GPIO_FN_IRQ21, /* PORT 93 */
+ GPIO_FN_IRQ22, /* PORT 94 */
+ GPIO_FN_IRQ23, /* PORT 95 */
+ GPIO_FN_IRQ24, /* PORT 112 */
+ GPIO_FN_IRQ25, /* PORT 119 */
+ GPIO_FN_IRQ26_121, /* PORT 121 */
+ GPIO_FN_IRQ26_172, /* PORT 172 */
+ GPIO_FN_IRQ27_122, /* PORT 122 */
+ GPIO_FN_IRQ27_180, /* PORT 180 */
+ GPIO_FN_IRQ28_123, /* PORT 123 */
+ GPIO_FN_IRQ28_181, /* PORT 181 */
+ GPIO_FN_IRQ29_129, /* PORT 129 */
+ GPIO_FN_IRQ29_182, /* PORT 182 */
+ GPIO_FN_IRQ30_130, /* PORT 130 */
+ GPIO_FN_IRQ30_183, /* PORT 183 */
+ GPIO_FN_IRQ31_138, /* PORT 138 */
+ GPIO_FN_IRQ31_184, /* PORT 184 */
+
+ /*
+ * MSIOF0 (PORT 36, 37, 38, 39
+ * 40, 41, 42, 43, 44, 45)
+ */
+ GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_TSCK,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_MCK0,
+ GPIO_FN_MSIOF0_MCK1, GPIO_FN_MSIOF0_SS1,
+ GPIO_FN_MSIOF0_SS2, GPIO_FN_MSIOF0_TXD,
+
+ /*
+ * MSIOF1 (PORT 39, 40, 41, 42, 43, 44
+ * 84, 85, 86, 87, 88, 89, 90, 91, 92, 93)
+ */
+ GPIO_FN_MSIOF1_TSCK_39, GPIO_FN_MSIOF1_TSYNC_40,
+ GPIO_FN_MSIOF1_TSCK_88, GPIO_FN_MSIOF1_TSYNC_89,
+ GPIO_FN_MSIOF1_TXD_41, GPIO_FN_MSIOF1_RXD_42,
+ GPIO_FN_MSIOF1_TXD_90, GPIO_FN_MSIOF1_RXD_91,
+ GPIO_FN_MSIOF1_SS1_43, GPIO_FN_MSIOF1_SS2_44,
+ GPIO_FN_MSIOF1_SS1_92, GPIO_FN_MSIOF1_SS2_93,
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+
+ /*
+ * MSIOF2 (PORT 134, 135, 136, 137, 138, 139
+ * 148, 149, 150, 151)
+ */
+ GPIO_FN_MSIOF2_RSCK, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_MCK1,
+ GPIO_FN_MSIOF2_SS1, GPIO_FN_MSIOF2_SS2,
+ GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_TSCK,
+ GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TXD,
+
+ /* MSIOF3 (PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+ GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TSYNC,
+ GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_TXD,
+ GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC,
+ GPIO_FN_BBIF1_FLOW, GPIO_FN_BB_RX_FLOW_N,
+
+ /* MSIOF4 (PORT 0, 1, 2, 3) */
+ GPIO_FN_BBIF2_TSCK1, GPIO_FN_BBIF2_TSYNC1,
+ GPIO_FN_BBIF2_TXD1, GPIO_FN_BBIF2_RXD,
+
+ /* FSI (PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */
+ GPIO_FN_FSIACK, GPIO_FN_FSIBCK,
+ GPIO_FN_FSIAILR, GPIO_FN_FSIAIBT,
+ GPIO_FN_FSIAISLD, GPIO_FN_FSIAOMC,
+ GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT,
+ GPIO_FN_FSIAOSLD, GPIO_FN_FSIASPDIF_11,
+ GPIO_FN_FSIASPDIF_15,
+
+ /* FMSI (PORT 12, 13, 14, 15, 16, 17, 18, 65) */
+ GPIO_FN_FMSOCK, GPIO_FN_FMSOOLR,
+ GPIO_FN_FMSIOLR, GPIO_FN_FMSOOBT,
+ GPIO_FN_FMSIOBT, GPIO_FN_FMSOSLD,
+ GPIO_FN_FMSOILR, GPIO_FN_FMSIILR,
+ GPIO_FN_FMSOIBT, GPIO_FN_FMSIIBT,
+ GPIO_FN_FMSISLD, GPIO_FN_FMSICK,
+
+ /* SCIFA0 (PORT 152, 153, 156, 157, 158) */
+ GPIO_FN_SCIFA0_TXD, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_RTS,
+ GPIO_FN_SCIFA0_CTS,
+
+ /* SCIFA1 (PORT 154, 155, 159, 160, 161) */
+ GPIO_FN_SCIFA1_TXD, GPIO_FN_SCIFA1_RXD,
+ GPIO_FN_SCIFA1_SCK, GPIO_FN_SCIFA1_RTS,
+ GPIO_FN_SCIFA1_CTS,
+
+ /* SCIFA2 (PORT 94, 95, 96, 97, 98) */
+ GPIO_FN_SCIFA2_CTS1, GPIO_FN_SCIFA2_RTS1,
+ GPIO_FN_SCIFA2_TXD1, GPIO_FN_SCIFA2_RXD1,
+ GPIO_FN_SCIFA2_SCK1,
+
+ /* SCIFA3 (PORT 43, 44,
+ 140, 141, 142, 143, 144) */
+ GPIO_FN_SCIFA3_CTS_43, GPIO_FN_SCIFA3_CTS_140,
+ GPIO_FN_SCIFA3_RTS_44, GPIO_FN_SCIFA3_RTS_141,
+ GPIO_FN_SCIFA3_SCK, GPIO_FN_SCIFA3_TXD,
+ GPIO_FN_SCIFA3_RXD,
+
+ /* SCIFA4 (PORT 5, 6) */
+ GPIO_FN_SCIFA4_RXD, GPIO_FN_SCIFA4_TXD,
+
+ /* SCIFA5 (PORT 8, 12) */
+ GPIO_FN_SCIFA5_RXD, GPIO_FN_SCIFA5_TXD,
+
+ /* SCIFB (PORT 162, 163, 164, 165, 166) */
+ GPIO_FN_SCIFB_SCK, GPIO_FN_SCIFB_RTS,
+ GPIO_FN_SCIFB_CTS, GPIO_FN_SCIFB_TXD,
+ GPIO_FN_SCIFB_RXD,
+
+ /*
+ * CEU (PORT 16, 17,
+ * 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
+ * 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
+ * 120)
+ */
+ GPIO_FN_VIO_HD, GPIO_FN_VIO_CKO1, GPIO_FN_VIO_CKO2,
+ GPIO_FN_VIO_VD, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
+ GPIO_FN_VIO_CKO,
+ GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
+ GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
+ GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
+ GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
+ GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
+ GPIO_FN_VIO_D15,
+
+ /* USB0 (PORT 113, 114, 115, 116, 117, 167) */
+ GPIO_FN_IDIN_0, GPIO_FN_EXTLP_0,
+ GPIO_FN_OVCN2_0, GPIO_FN_PWEN_0,
+ GPIO_FN_OVCN_0, GPIO_FN_VBUS0_0,
+
+ /* USB1 (PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */
+ GPIO_FN_IDIN_1_18, GPIO_FN_IDIN_1_113,
+ GPIO_FN_PWEN_1_115, GPIO_FN_PWEN_1_138,
+ GPIO_FN_OVCN_1_114, GPIO_FN_OVCN_1_162,
+ GPIO_FN_EXTLP_1, GPIO_FN_OVCN2_1,
+ GPIO_FN_VBUS0_1,
+
+ /* GPIO (PORT 41, 42, 43, 44) */
+ GPIO_FN_GPI0, GPIO_FN_GPI1, GPIO_FN_GPO0, GPIO_FN_GPO1,
+
+ /*
+ * BSC (PORT 19,
+ * 20, 21, 22, 25, 26, 27, 28, 29,
+ * 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
+ * 40, 41, 42, 43, 44, 45,
+ * 62, 63, 64, 65, 66, 67,
+ * 71, 72, 74, 75)
+ */
+ GPIO_FN_BS, GPIO_FN_WE1,
+ GPIO_FN_CKO, GPIO_FN_WAIT, GPIO_FN_RDWR,
+
+ GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3,
+ GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9,
+ GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13,
+ GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17,
+ GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21,
+ GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25,
+ GPIO_FN_A26,
+
+ GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4,
+ GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_CS6A,
+
+ /*
+ * BSC/FLCTL (PORT 23, 24,
+ * 46, 47, 48, 49,
+ * 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+ * 60, 61, 69, 70)
+ */
+ GPIO_FN_RD_FSC, GPIO_FN_WE0_FWE,
+ GPIO_FN_A4_FOE, GPIO_FN_A5_FCDE,
+ GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, GPIO_FN_D2_NAF2,
+ GPIO_FN_D3_NAF3, GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5,
+ GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, GPIO_FN_D8_NAF8,
+ GPIO_FN_D9_NAF9, GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11,
+ GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, GPIO_FN_D14_NAF14,
+ GPIO_FN_D15_NAF15,
+
+ /*
+ * MMCIF(1) (PORT 84, 85, 86, 87, 88, 89,
+ * 90, 91, 92, 99)
+ */
+ GPIO_FN_MMCD0_0, GPIO_FN_MMCD0_1, GPIO_FN_MMCD0_2,
+ GPIO_FN_MMCD0_3, GPIO_FN_MMCD0_4, GPIO_FN_MMCD0_5,
+ GPIO_FN_MMCD0_6, GPIO_FN_MMCD0_7,
+ GPIO_FN_MMCCMD0, GPIO_FN_MMCCLK0,
+
+ /* MMCIF(2) (PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
+ GPIO_FN_MMCD1_0, GPIO_FN_MMCD1_1, GPIO_FN_MMCD1_2,
+ GPIO_FN_MMCD1_3, GPIO_FN_MMCD1_4, GPIO_FN_MMCD1_5,
+ GPIO_FN_MMCD1_6, GPIO_FN_MMCD1_7,
+ GPIO_FN_MMCCLK1, GPIO_FN_MMCCMD1,
+
+ /* SPU2 (PORT 65) */
+ GPIO_FN_VINT_I,
+
+ /* FLCTL (PORT 66, 68, 73) */
+ GPIO_FN_FCE1, GPIO_FN_FCE0, GPIO_FN_FRB,
+
+ /* HSI (PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+ GPIO_FN_GP_RX_FLAG, GPIO_FN_GP_RX_DATA, GPIO_FN_GP_TX_READY,
+ GPIO_FN_GP_RX_WAKE, GPIO_FN_MP_TX_FLAG, GPIO_FN_MP_TX_DATA,
+ GPIO_FN_MP_RX_READY, GPIO_FN_MP_TX_WAKE,
+
+ /*
+ * MFI (PORT 76, 77, 78, 79,
+ * 80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
+ * 90, 91, 92, 93, 94, 95, 96, 97, 98, 99)
+ */
+ GPIO_FN_MFIv6, /* see MSEL4CR 6 */
+ GPIO_FN_MFIv4, /* see MSEL4CR 6 */
+
+ GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_BUSCLK_MEMC_A0,
+ GPIO_FN_MEMC_CS1_MEMC_A1, GPIO_FN_MEMC_ADV_MEMC_DREQ0,
+ GPIO_FN_MEMC_WAIT_MEMC_DREQ1, GPIO_FN_MEMC_NOE,
+ GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_INT,
+
+ GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2,
+ GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5,
+ GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8,
+ GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11,
+ GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14,
+ GPIO_FN_MEMC_AD15,
+
+ /* SIM (PORT 94, 95, 98) */
+ GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK, GPIO_FN_SIM_D,
+
+ /* TPU (PORT 93, 99, 112, 160, 161) */
+ GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1,
+ GPIO_FN_TPU0TO2_93, GPIO_FN_TPU0TO2_99,
+ GPIO_FN_TPU0TO3,
+
+ /* I2C2 (PORT 110, 111) */
+ GPIO_FN_I2C_SCL2, GPIO_FN_I2C_SDA2,
+
+ /* I2C3(1) (PORT 114, 115) */
+ GPIO_FN_I2C_SCL3, GPIO_FN_I2C_SDA3,
+
+ /* I2C3(2) (PORT 137, 145) */
+ GPIO_FN_I2C_SCL3S, GPIO_FN_I2C_SDA3S,
+
+ /* I2C4(2) (PORT 116, 117) */
+ GPIO_FN_I2C_SCL4, GPIO_FN_I2C_SDA4,
+
+ /* I2C4(2) (PORT 146, 147) */
+ GPIO_FN_I2C_SCL4S, GPIO_FN_I2C_SDA4S,
+
+ /*
+ * KEYSC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
+ * 130, 131, 132, 133, 134, 135, 136)
+ */
+ GPIO_FN_KEYOUT0, GPIO_FN_KEYIN0_121, GPIO_FN_KEYIN0_136,
+ GPIO_FN_KEYOUT1, GPIO_FN_KEYIN1_122, GPIO_FN_KEYIN1_135,
+ GPIO_FN_KEYOUT2, GPIO_FN_KEYIN2_123, GPIO_FN_KEYIN2_134,
+ GPIO_FN_KEYOUT3, GPIO_FN_KEYIN3_124, GPIO_FN_KEYIN3_133,
+ GPIO_FN_KEYOUT4, GPIO_FN_KEYIN4,
+ GPIO_FN_KEYOUT5, GPIO_FN_KEYIN5,
+ GPIO_FN_KEYOUT6, GPIO_FN_KEYIN6,
+ GPIO_FN_KEYOUT7, GPIO_FN_KEYIN7,
+
+ /*
+ * LCDC (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
+ * 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,
+ * 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,
+ * 150, 151)
+ */
+ GPIO_FN_LCDC0_SELECT, /* LCDC 0 */
+ GPIO_FN_LCDC1_SELECT, /* LCDC 1 */
+ GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDVSYN,
+ GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_LCDRD,
+ GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDLCLK,
+ GPIO_FN_LCDDON,
+
+ GPIO_FN_LCDD0, GPIO_FN_LCDD1, GPIO_FN_LCDD2, GPIO_FN_LCDD3,
+ GPIO_FN_LCDD4, GPIO_FN_LCDD5, GPIO_FN_LCDD6, GPIO_FN_LCDD7,
+ GPIO_FN_LCDD8, GPIO_FN_LCDD9, GPIO_FN_LCDD10, GPIO_FN_LCDD11,
+ GPIO_FN_LCDD12, GPIO_FN_LCDD13, GPIO_FN_LCDD14, GPIO_FN_LCDD15,
+ GPIO_FN_LCDD16, GPIO_FN_LCDD17, GPIO_FN_LCDD18, GPIO_FN_LCDD19,
+ GPIO_FN_LCDD20, GPIO_FN_LCDD21, GPIO_FN_LCDD22, GPIO_FN_LCDD23,
+
+ /* IRDA (PORT 139, 140, 141, 142) */
+ GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
+ GPIO_FN_IROUT_139, GPIO_FN_IROUT_140,
+
+ /* TSIF1 (PORT 156, 157, 158, 159) */
+ GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */
+ GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */
+ GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */
+ GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */
+
+ GPIO_FN_TS_SPSYNC1, GPIO_FN_TS_SDAT1,
+ GPIO_FN_TS_SDEN1, GPIO_FN_TS_SCK1,
+
+ /* TSIF2 (PORT 137, 145, 146, 147) */
+ GPIO_FN_TS_SPSYNC2, GPIO_FN_TS_SDAT2,
+ GPIO_FN_TS_SDEN2, GPIO_FN_TS_SCK2,
+
+ /* HDMI (PORT 169, 170) */
+ GPIO_FN_HDMI_HPD, GPIO_FN_HDMI_CEC,
+
+ /* SDHI0 (PORT 171, 172, 173, 174, 175, 176, 177, 178) */
+ GPIO_FN_SDHICLK0, GPIO_FN_SDHICD0,
+ GPIO_FN_SDHICMD0, GPIO_FN_SDHIWP0,
+ GPIO_FN_SDHID0_0, GPIO_FN_SDHID0_1,
+ GPIO_FN_SDHID0_2, GPIO_FN_SDHID0_3,
+
+ /* SDHI1 (PORT 179, 180, 181, 182, 183, 184) */
+ GPIO_FN_SDHICLK1, GPIO_FN_SDHICMD1, GPIO_FN_SDHID1_0,
+ GPIO_FN_SDHID1_1, GPIO_FN_SDHID1_2, GPIO_FN_SDHID1_3,
+
+ /* SDHI2 (PORT 185, 186, 187, 188, 189, 190) */
+ GPIO_FN_SDHICLK2, GPIO_FN_SDHICMD2, GPIO_FN_SDHID2_0,
+ GPIO_FN_SDHID2_1, GPIO_FN_SDHID2_2, GPIO_FN_SDHID2_3,
+
+ /* SDENC see MSEL4CR 19 */
+ GPIO_FN_SDENC_CPG,
+ GPIO_FN_SDENC_DV_CLKI,
+};
+
+#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h
new file mode 100644
index 0000000..f580e22
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7377.h
@@ -0,0 +1,360 @@
+#ifndef __ASM_SH7377_H__
+#define __ASM_SH7377_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* 55-1 -> 55-5 (GPIO) */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+ GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+ GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+ GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+ GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+ GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+ GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+ GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+ GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+ GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+ GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+ GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+ GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+ GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+ GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+ GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+ GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+
+ /* Special Pull-up / Pull-down Functions */
+ GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU,
+ GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU,
+ GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU,
+ GPIO_FN_PORT72_KEYIN6_PU,
+
+ /* 55-1 (FN) */
+ GPIO_FN_VBUS_0,
+ GPIO_FN_CPORT0,
+ GPIO_FN_CPORT1,
+ GPIO_FN_CPORT2,
+ GPIO_FN_CPORT3,
+ GPIO_FN_CPORT4,
+ GPIO_FN_CPORT5,
+ GPIO_FN_CPORT6,
+ GPIO_FN_CPORT7,
+ GPIO_FN_CPORT8,
+ GPIO_FN_CPORT9,
+ GPIO_FN_CPORT10,
+ GPIO_FN_CPORT11, GPIO_FN_SIN2,
+ GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+ GPIO_FN_CPORT13, GPIO_FN_RFSPO4,
+ GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+ GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2,
+ GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3,
+ GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2,
+ GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2,
+ GPIO_FN_CPORT19_MPORT1,
+ GPIO_FN_CPORT20, GPIO_FN_RFSPO6,
+ GPIO_FN_CPORT21, GPIO_FN_STATUS0,
+ GPIO_FN_CPORT22, GPIO_FN_STATUS1,
+ GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+ GPIO_FN_B_SYNLD1,
+ GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK,
+ GPIO_FN_XMAINPS,
+ GPIO_FN_XDIVPS,
+ GPIO_FN_XIDRST,
+ GPIO_FN_IDCLK, GPIO_FN_IC_DP,
+ GPIO_FN_IDIO, GPIO_FN_IC_DM,
+ GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT,
+ GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+ GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+ GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+ GPIO_FN_PCMCLKO,
+ GPIO_FN_SYNC8KO,
+
+ /* 55-2 (FN) */
+ GPIO_FN_DNPCM_A,
+ GPIO_FN_UPPCM_A,
+ GPIO_FN_VACK,
+ GPIO_FN_XTALB1L,
+ GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+ GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS,
+ GPIO_FN_GPS_IM,
+ GPIO_FN_GPS_IS,
+ GPIO_FN_GPS_QM,
+ GPIO_FN_GPS_QS,
+ GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT,
+ GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3,
+ GPIO_FN_FMSIOLR,
+ GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1,
+ GPIO_FN_FMSIOBT,
+ GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2,
+ GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3,
+ GPIO_FN_OPORT3, GPIO_FN_FMSIILR,
+ GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2,
+ GPIO_FN_FMSIIBT,
+ GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0,
+ GPIO_FN_A0_EA0, GPIO_FN_BS,
+ GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2,
+ GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2,
+ GPIO_FN_TPU0TO1,
+ GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5,
+ GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4,
+ GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+ GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+ GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+ GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+ GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+ GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+ GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD,
+ GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6,
+ GPIO_FN_D0_ED0_NAF0,
+ GPIO_FN_D1_ED1_NAF1,
+ GPIO_FN_D2_ED2_NAF2,
+ GPIO_FN_D3_ED3_NAF3,
+ GPIO_FN_D4_ED4_NAF4,
+ GPIO_FN_D5_ED5_NAF5,
+ GPIO_FN_D6_ED6_NAF6,
+ GPIO_FN_D7_ED7_NAF7,
+ GPIO_FN_D8_ED8_NAF8,
+ GPIO_FN_D9_ED9_NAF9,
+ GPIO_FN_D10_ED10_NAF10,
+ GPIO_FN_D11_ED11_NAF11,
+ GPIO_FN_D12_ED12_NAF12,
+ GPIO_FN_D13_ED13_NAF13,
+ GPIO_FN_D14_ED14_NAF14,
+ GPIO_FN_D15_ED15_NAF15,
+ GPIO_FN_CS4,
+ GPIO_FN_CS5A, GPIO_FN_FMSICK,
+ GPIO_FN_CS5B, GPIO_FN_FCE1,
+
+ /* 55-3 (FN) */
+ GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0,
+ GPIO_FN_FCE0,
+ GPIO_FN_WAIT, GPIO_FN_DREQ0,
+ GPIO_FN_RD_XRD,
+ GPIO_FN_WE0_XWR0_FWE,
+ GPIO_FN_WE1_XWR1,
+ GPIO_FN_FRB,
+ GPIO_FN_CKO,
+ GPIO_FN_NBRSTOUT,
+ GPIO_FN_NBRST,
+ GPIO_FN_GPS_EPPSIN,
+ GPIO_FN_LATCHPULSE,
+ GPIO_FN_LTESIGNAL,
+ GPIO_FN_LEGACYSTATE,
+ GPIO_FN_TCKON,
+ GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0,
+ GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1,
+ GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD,
+ GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1,
+ GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2,
+ GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC,
+ GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD,
+ GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK,
+ GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2,
+ GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3,
+ GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC,
+ GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR,
+ GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2,
+ GPIO_FN_PORT140_FSIAOBT,
+ GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3,
+ GPIO_FN_PORT141_FSIAOSLD,
+ GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK,
+ GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR,
+ GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT,
+ GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD,
+ GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2,
+ GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5,
+ GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6,
+ GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1,
+ GPIO_FN_MFG0_IN2,
+ GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+ GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+ GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+ GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+ GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2,
+ GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD,
+
+ /* 55-4 (FN) */
+ GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+ GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+ GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0,
+ GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0,
+ GPIO_FN_MFG3_IN2,
+ GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0,
+ GPIO_FN_MFG3_IN1,
+ GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0,
+ GPIO_FN_MFG3_OUT1,
+ GPIO_FN_TPU3TO0,
+ GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI,
+ GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS,
+ GPIO_FN_BBIF2_TSYNC1,
+ GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS,
+ GPIO_FN_BBIF2_TSCK1,
+ GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD,
+ GPIO_FN_BBIF2_TXD1,
+ GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD,
+ GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK,
+ GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1,
+ GPIO_FN_LCDD6, GPIO_FN_XWR2,
+ GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+ GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16,
+ GPIO_FN_ED16,
+ GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17,
+ GPIO_FN_ED17,
+ GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18,
+ GPIO_FN_ED18,
+ GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19,
+ GPIO_FN_ED19,
+ GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20,
+ GPIO_FN_ED20,
+ GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21,
+ GPIO_FN_ED21,
+ GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22,
+ GPIO_FN_ED22,
+ GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0,
+ GPIO_FN_VIO_DR7,
+ GPIO_FN_D23, GPIO_FN_ED23,
+ GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1,
+ GPIO_FN_VIO_VDR,
+ GPIO_FN_D24, GPIO_FN_ED24,
+ GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25,
+ GPIO_FN_ED25,
+ GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+ GPIO_FN_ED26,
+ GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27,
+ GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+ GPIO_FN_ED28,
+ GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+ GPIO_FN_ED29,
+ GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+ GPIO_FN_ED30,
+ GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+ GPIO_FN_ED31,
+ GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3,
+ GPIO_FN_VIO_CLKR,
+ GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC,
+ GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+ GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4,
+ GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK,
+ GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5,
+ GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD,
+ GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN,
+ GPIO_FN_MSIOF0L_TXD,
+ GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+ GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM,
+ GPIO_FN_PORT226_VIO_CKO2,
+ GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN,
+ GPIO_FN_SCIFA1_RXD,
+ GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1,
+ GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC,
+ GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR,
+ GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT,
+ GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG,
+ GPIO_FN_PORT233_FSIACK,
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD,
+ GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2,
+ GPIO_FN_PORT235_FSIAILR,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT,
+ GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+
+ /* 55-5 (FN) */
+ GPIO_FN_MSIOF1_SS2,
+ GPIO_FN_SCIFA6_TXD,
+ GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1,
+ GPIO_FN_TPU4TO0,
+ GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+ GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+ GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS,
+ GPIO_FN_PORT244_MSIOF2_RXD,
+ GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS,
+ GPIO_FN_PORT245_MSIOF2_TXD,
+ GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1,
+ GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+ GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2,
+ GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+ GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1,
+ GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0,
+ GPIO_FN_PORT248_MSIOF2_TSCK,
+ GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC,
+ GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0,
+ GPIO_FN_SDHICD0,
+ GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0,
+ GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0,
+ GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+ GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0,
+ GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+ GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+ GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1,
+ GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2,
+ GPIO_FN_TMS3_SWDIO_MC1,
+ GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2,
+ GPIO_FN_TDO3_SWO0_MC1,
+ GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+ GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2,
+ GPIO_FN_RTCK3_SWO1_MC1,
+ GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+ GPIO_FN_RESETOUTS,
+};
+
+#endif /* __ASM_SH7377_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
new file mode 100644
index 0000000..76a687e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
new file mode 100644
index 0000000..ae0d8d8
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_TIMEX_H
+#define __ASM_MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */
+
+#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
new file mode 100644
index 0000000..0bd7556
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_UNCOMPRESS_H
+#define __ASM_MACH_UNCOMPRESS_H
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
new file mode 100644
index 0000000..fb3c4f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_VMALLOC_H
+#define __ASM_MACH_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x24000000)
+
+#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
new file mode 100644
index 0000000..6a547b4
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -0,0 +1,270 @@
+/*
+ * sh7367 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+ UNUSED_INTCA = 0,
+
+ /* interrupt sources INTCA */
+ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+ IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+ DIRC,
+ CRYPT1_ERR, CRYPT2_STD,
+ IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+ ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX,
+ ETM11_ACQCMP, ETM11_FULL,
+ MFI_MFIM, MFI_MFIS,
+ BBIF1, BBIF2,
+ USBDMAC_USHDMI,
+ USBHS_USHI0, USBHS_USHI1,
+ CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+ KEYSC_KEY,
+ SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+ MSIOF2, MSIOF1,
+ SCIFA4, SCIFA5, SCIFB,
+ FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+ SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+ SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3,
+ MSU_MSU, MSU_MSU2,
+ IREM,
+ SIU,
+ SPU,
+ IRDA,
+ TPU0, TPU1, TPU2, TPU3, TPU4,
+ LCRC,
+ PINT1, PINT2,
+ TTI20,
+ MISTY,
+ DDM,
+ SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
+ RWDT0, RWDT1,
+ DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+ DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+ DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+ DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+ DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+ DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+
+ /* interrupt groups INTCA */
+ DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2,
+ ETM11, ARM11, USBHS, FLCTL, IIC1, SDHI0, SDHI1, SDHI2,
+};
+
+static struct intc_vect intca_vectors[] = {
+ INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+ INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+ INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+ INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+ INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+ INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+ INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+ INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+ INTC_VECT(DIRC, 0x0560),
+ INTC_VECT(CRYPT1_ERR, 0x05e0),
+ INTC_VECT(CRYPT2_STD, 0x0700),
+ INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+ INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+ INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840),
+ INTC_VECT(ARM11_COMMRX, 0x0860),
+ INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0),
+ INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+ INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+ INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+ INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+ INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+ INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+ INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+ INTC_VECT(KEYSC_KEY, 0x0be0),
+ INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+ INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+ INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+ INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+ INTC_VECT(SCIFB, 0x0d60),
+ INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+ INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+ INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+ INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+ INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+ INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0),
+ INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+ INTC_VECT(IREM, 0x0f60),
+ INTC_VECT(SIU, 0x0fa0),
+ INTC_VECT(SPU, 0x0fc0),
+ INTC_VECT(IRDA, 0x0480),
+ INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+ INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+ INTC_VECT(TPU4, 0x0520),
+ INTC_VECT(LCRC, 0x0540),
+ INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020),
+ INTC_VECT(TTI20, 0x1100),
+ INTC_VECT(MISTY, 0x1120),
+ INTC_VECT(DDM, 0x1140),
+ INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
+ INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
+ INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+ INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+ INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+ INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+ INTC_VECT(DMAC_2_DADERR, 0x20c0),
+ INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+ INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+ INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+ INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+ INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+ INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+ INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+ INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+ INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+ DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+ INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+ DMAC_2_DEI5, DMAC_2_DADERR),
+ INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+ DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+ INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+ DMAC2_2_DEI5, DMAC2_2_DADERR),
+ INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+ DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+ INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+ DMAC3_2_DEI5, DMAC3_2_DADERR),
+ INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL),
+ INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX),
+ INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+ INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+ FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+ INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+ INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+ SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+ INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+ SDHI1_SDHI1I2, SDHI1_SDHI1I3),
+ INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
+ SDHI2_SDHI2I2, SDHI2_SDHI2I3),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+ { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+ ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
+ { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+ { CRYPT1_ERR, CRYPT2_STD, DIRC, 0,
+ DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+ { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+ { PINT1, PINT2, 0, 0,
+ BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+ { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+ { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+ DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+ { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+ { DDM, 0, 0, 0,
+ 0, 0, ETM11_FULL, ETM11_ACQCMP } },
+ { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+ { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+ SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+ { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+ { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+ 0, 0, MSIOF2, 0 } },
+ { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+ { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+ FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+ { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+ { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+ TTI20, USBDMAC_USHDMI, SPU, SIU } },
+ { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+ { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+ CMT2, USBHS_USHI1, USBHS_USHI0, 0 } },
+ { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+ { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+ 0, 0, 0, 0 } },
+ { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+ { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+ LCRC, MSU_MSU2, IREM, MSU_MSU } },
+ { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+ { 0, 0, TPU0, TPU1,
+ TPU2, TPU3, TPU4, 0 } },
+ { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+ { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
+ MISTY, CMT3, RWDT1, RWDT0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+ { 0xe6900010, 0, 32, 4, /* INTPRI00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900014, 0, 32, 4, /* INTPRI10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+
+ { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+ { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
+ { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
+ CMT1_CMT11, ARM11 } },
+ { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2,
+ CMT1_CMT12, TPU4 } },
+ { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+ MFI_MFIM, USBHS } },
+ { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+ 0, CMT1_CMT10 } },
+ { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+ SCIFA2, SCIFA3 } },
+ { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+ FLCTL, SDHI0 } },
+ { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+ { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } },
+ { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } },
+ { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+ { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+ { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } },
+ { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+ { 0xe6900000, 16, 2, /* ICR1A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900004, 16, 2, /* ICR2A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+ { 0xe6900020, 0, 8, /* INTREQ00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900024, 0, 8, /* INTREQ10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7367-intca",
+ intca_vectors, intca_groups,
+ intca_mask_registers, intca_prio_registers,
+ intca_sense_registers, intca_ack_registers);
+
+void __init sh7367_init_irq(void)
+{
+ /* INTCA */
+ register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
new file mode 100644
index 0000000..c57a923
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -0,0 +1,369 @@
+/*
+ * sh7372 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+ UNUSED_INTCA = 0,
+
+ /* interrupt sources INTCA */
+ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+ IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+ IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+ IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+ DIRC,
+ CRYPT_STD,
+ IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+ AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+ MFI_MFIM, MFI_MFIS,
+ BBIF1, BBIF2,
+ USBHSDMAC0_USHDMI,
+ _3DG_SGX540,
+ CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+ KEYSC_KEY,
+ SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+ MSIOF2, MSIOF1,
+ SCIFA4, SCIFA5, SCIFB,
+ FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+ SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+ SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2,
+ IRREM,
+ IRDA,
+ TPU0,
+ TTI20,
+ DDM,
+ SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
+ RWDT0,
+ DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
+ DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
+ DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+ DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+ DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+ DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+ SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+ HDMI,
+ SPU2_SPU0, SPU2_SPU1,
+ FSI, FMSI,
+ MIPI_HSI,
+ IPMMU_IPMMUD,
+ CEC_1, CEC_2,
+ AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+ MFIS2,
+ CPORTR2S,
+ CMT14, CMT15,
+ MMC_MMC_ERR, MMC_MMC_NOR,
+ IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+ IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
+ USB0_USB0I1, USB0_USB0I0,
+ USB1_USB1I1, USB1_USB1I0,
+ USBHSDMAC1_USHDMI,
+
+ /* interrupt groups INTCA */
+ DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+ AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2
+};
+
+static struct intc_vect intca_vectors[] __initdata = {
+ INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+ INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+ INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+ INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+ INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+ INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+ INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+ INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+ INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+ INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+ INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+ INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+ INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+ INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+ INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+ INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+ INTC_VECT(DIRC, 0x0560),
+ INTC_VECT(CRYPT_STD, 0x0700),
+ INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+ INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+ INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+ INTC_VECT(AP_ARM_COMMRX, 0x0860),
+ INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+ INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+ INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
+ INTC_VECT(_3DG_SGX540, 0x0a60),
+ INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+ INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+ INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+ INTC_VECT(KEYSC_KEY, 0x0be0),
+ INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+ INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+ INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+ INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+ INTC_VECT(SCIFB, 0x0d60),
+ INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+ INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+ INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+ INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+ INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+ INTC_VECT(SDHI1_SDHI1I2, 0x0ec0),
+ INTC_VECT(IRREM, 0x0f60),
+ INTC_VECT(IRDA, 0x0480),
+ INTC_VECT(TPU0, 0x04a0),
+ INTC_VECT(TTI20, 0x1100),
+ INTC_VECT(DDM, 0x1140),
+ INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
+ INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
+ INTC_VECT(RWDT0, 0x1280),
+ INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
+ INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
+ INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
+ INTC_VECT(DMAC1_2_DADERR, 0x20c0),
+ INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+ INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+ INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+ INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+ INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+ INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+ INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+ INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+ INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
+ INTC_VECT(SHWYSTAT_COM, 0x1340),
+ INTC_VECT(HDMI, 0x17e0),
+ INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+ INTC_VECT(FSI, 0x1840),
+ INTC_VECT(FMSI, 0x1860),
+ INTC_VECT(MIPI_HSI, 0x18e0),
+ INTC_VECT(IPMMU_IPMMUD, 0x1920),
+ INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
+ INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+ INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+ INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+ INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+ INTC_VECT(MFIS2, 0x1a00),
+ INTC_VECT(CPORTR2S, 0x1a20),
+ INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+ INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
+ INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
+ INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
+ INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
+ INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
+ INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
+ INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
+ INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+ INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
+ DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
+ INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
+ DMAC1_2_DEI5, DMAC1_2_DADERR),
+ INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+ DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+ INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+ DMAC2_2_DEI5, DMAC2_2_DADERR),
+ INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+ DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+ INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+ DMAC3_2_DEI5, DMAC3_2_DADERR),
+ INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
+ INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+ AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
+ INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+ INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+ FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+ INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+ INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+ SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+ INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+ SDHI1_SDHI1I2),
+ INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
+ SDHI2_SDHI2I2, SDHI2_SDHI2I3),
+ INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+};
+
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
+ { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+ { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+ AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+ { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+ { 0, CRYPT_STD, DIRC, 0,
+ DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
+ { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+ { 0, 0, 0, 0,
+ BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+ { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+ { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+ DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+ { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+ { DDM, 0, 0, 0,
+ 0, 0, 0, 0 } },
+ { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+ { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
+ SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+ { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+ { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+ 0, 0, MSIOF2, 0 } },
+ { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+ { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+ FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+ { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+ { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+ TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
+ { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+ { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+ CMT2, 0, 0, _3DG_SGX540 } },
+ { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+ { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+ 0, 0, 0, 0 } },
+ { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+ { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+ 0, 0, IRREM, 0 } },
+ { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+ { 0, 0, TPU0, 0,
+ 0, 0, 0, 0 } },
+ { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+ { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
+ 0, CMT3, 0, RWDT0 } },
+ { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+ { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+ 0, 0, 0, 0 } },
+ { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+ { 0, 0, 0, 0,
+ 0, 0, 0, HDMI } },
+ { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+ { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+ 0, 0, 0, MIPI_HSI } },
+ { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+ { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
+ AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+ AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+ { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+ { MFIS2, CPORTR2S, CMT14, CMT15,
+ 0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
+ { 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
+ { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+ IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
+ { 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
+ { 0, 0, 0, 0,
+ USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
+ { 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
+ { USBHSDMAC1_USHDMI, 0, 0, 0,
+ 0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
+ { 0xe6900010, 0, 32, 4, /* INTPRI00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900014, 0, 32, 4, /* INTPRI10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900018, 0, 32, 4, /* INTPRI20A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690001c, 0, 32, 4, /* INTPRI30A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+ { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
+ { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+ { 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
+ CMT1_CMT11, AP_ARM1 } },
+ { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
+ CMT1_CMT12, 0 } },
+ { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
+ MFI_MFIM, 0 } },
+ { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
+ _3DG_SGX540, CMT1_CMT10 } },
+ { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+ SCIFA2, SCIFA3 } },
+ { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
+ FLCTL, SDHI0 } },
+ { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
+ 0/* MSU */, IIC1 } },
+ { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
+ 0/* MSUG */, TTI20 } },
+ { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+ { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
+ { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
+ { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+ { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+ { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+ { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
+ { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+ { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
+ { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
+ CEC_1, CEC_2 } },
+ { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+ { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+ CMT14, CMT15 } },
+ { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+ MMC_MMC_ERR, MMC_MMC_NOR } },
+ { 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+ IIC4_WAITI4, IIC4_DTEI4 } },
+ { 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+ IIC3_WAITI3, IIC3_DTEI3 } },
+ { 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+ 0/*TXI*/, 0/*TEI*/} },
+ { 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+ USB1_USB1I1, USB1_USB1I0 } },
+ { 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+ { 0xe6900000, 32, 4, /* ICR1A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900004, 32, 4, /* ICR2A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900008, 32, 4, /* ICR3A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690000c, 32, 4, /* ICR4A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+ { 0xe6900020, 0, 8, /* INTREQ00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900024, 0, 8, /* INTREQ10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900028, 0, 8, /* INTREQ20A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690002c, 0, 8, /* INTREQ30A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca",
+ intca_vectors, intca_groups,
+ intca_mask_registers, intca_prio_registers,
+ intca_sense_registers, intca_ack_registers);
+
+void __init sh7372_init_irq(void)
+{
+ register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
new file mode 100644
index 0000000..125021c
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -0,0 +1,350 @@
+/*
+ * sh7377 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+ UNUSED_INTCA = 0,
+
+ /* interrupt sources INTCA */
+ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+ IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+ IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+ IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+ DIRC,
+ _2DG,
+ CRYPT_STD,
+ IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+ AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+ MFI_MFIM, MFI_MFIS,
+ BBIF1, BBIF2,
+ USBDMAC_USHDMI,
+ USBHS_USHI0, USBHS_USHI1,
+ _3DG_SGX540,
+ CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+ KEYSC_KEY,
+ SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+ MSIOF2, MSIOF1,
+ SCIFA4, SCIFA5, SCIFB,
+ FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+ SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+ SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3,
+ MSU_MSU, MSU_MSU2,
+ IRREM,
+ MSUG,
+ IRDA,
+ TPU0, TPU1, TPU2, TPU3, TPU4,
+ LCRC,
+ PINTCA_PINT1, PINTCA_PINT2,
+ TTI20,
+ MISTY,
+ DDM,
+ RWDT0, RWDT1,
+ DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+ DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+ DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+ DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+ DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+ DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+ SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+ ICUSB_ICUSB0, ICUSB_ICUSB1,
+ ICUDMC_ICUDMC1, ICUDMC_ICUDMC2,
+ SPU2_SPU0, SPU2_SPU1,
+ FSI,
+ FMSI,
+ SCUV,
+ IPMMU_IPMMUB,
+ AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+ MFIS2,
+ CPORTR2S,
+ CMT14, CMT15,
+ SCIFA6,
+
+ /* interrupt groups INTCA */
+ DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+ AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, SDHI0, SDHI1,
+ ICUSB, ICUDMC
+};
+
+static struct intc_vect intca_vectors[] = {
+ INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+ INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+ INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+ INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+ INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+ INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+ INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+ INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+ INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+ INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+ INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+ INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+ INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+ INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+ INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+ INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+ INTC_VECT(DIRC, 0x0560),
+ INTC_VECT(_2DG, 0x05e0),
+ INTC_VECT(CRYPT_STD, 0x0700),
+ INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+ INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+ INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+ INTC_VECT(AP_ARM_COMMRX, 0x0860),
+ INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+ INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+ INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+ INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+ INTC_VECT(_3DG_SGX540, 0x0a60),
+ INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+ INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+ INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+ INTC_VECT(KEYSC_KEY, 0x0be0),
+ INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+ INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+ INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+ INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+ INTC_VECT(SCIFB, 0x0d60),
+ INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+ INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+ INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+ INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+ INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+ INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0),
+ INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+ INTC_VECT(IRREM, 0x0f60),
+ INTC_VECT(MSUG, 0x0fa0),
+ INTC_VECT(IRDA, 0x0480),
+ INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+ INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+ INTC_VECT(TPU4, 0x0520),
+ INTC_VECT(LCRC, 0x0540),
+ INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020),
+ INTC_VECT(TTI20, 0x1100),
+ INTC_VECT(MISTY, 0x1120),
+ INTC_VECT(DDM, 0x1140),
+ INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+ INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+ INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+ INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+ INTC_VECT(DMAC_2_DADERR, 0x20c0),
+ INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+ INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+ INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+ INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+ INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+ INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+ INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+ INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+ INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20),
+ INTC_VECT(SHWYSTAT_COM, 0x1340),
+ INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720),
+ INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0),
+ INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+ INTC_VECT(FSI, 0x1840),
+ INTC_VECT(FMSI, 0x1860),
+ INTC_VECT(SCUV, 0x1880),
+ INTC_VECT(IPMMU_IPMMUB, 0x1900),
+ INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+ INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+ INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+ INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+ INTC_VECT(MFIS2, 0x1a00),
+ INTC_VECT(CPORTR2S, 0x1a20),
+ INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+ INTC_VECT(SCIFA6, 0x1a80),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+ INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+ DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+ INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+ DMAC_2_DEI5, DMAC_2_DADERR),
+ INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+ DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+ INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+ DMAC2_2_DEI5, DMAC2_2_DADERR),
+ INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+ DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+ INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+ DMAC3_2_DEI5, DMAC3_2_DADERR),
+ INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX),
+ INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+ INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+ INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+ FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+ INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+ INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+ SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+ INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+ SDHI1_SDHI1I2, SDHI1_SDHI1I3),
+ INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+ INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1),
+ INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+ { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+ { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+ { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+ AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+ { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+ { _2DG, CRYPT_STD, DIRC, 0,
+ DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+ { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+ { PINTCA_PINT1, PINTCA_PINT2, 0, 0,
+ BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+ { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+ { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+ DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+ { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+ { DDM, 0, 0, 0,
+ 0, 0, 0, 0 } },
+ { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+ { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+ SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+ { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+ { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+ 0, 0, MSIOF2, 0 } },
+ { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+ { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+ FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+ { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+ { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+ TTI20, USBDMAC_USHDMI, 0, MSUG } },
+ { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+ { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+ CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } },
+ { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+ { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+ 0, 0, 0, 0 } },
+ { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+ { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+ LCRC, MSU_MSU2, IRREM, MSU_MSU } },
+ { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+ { 0, 0, TPU0, TPU1,
+ TPU2, TPU3, TPU4, 0 } },
+ { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+ { 0, 0, 0, 0,
+ MISTY, CMT3, RWDT1, RWDT0 } },
+ { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+ { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+ 0, 0, 0, 0 } },
+ { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+ { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0,
+ ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } },
+ { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+ { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+ SCUV, 0, 0, 0 } },
+ { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+ { IPMMU_IPMMUB, 0, 0, 0,
+ AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+ AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+ { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+ { MFIS2, CPORTR2S, CMT14, CMT15,
+ SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+ { 0xe6900010, 0, 32, 4, /* INTPRI00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900014, 0, 32, 4, /* INTPRI10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900018, 0, 32, 4, /* INTPRI10A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690001c, 0, 32, 4, /* INTPRI30A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+ { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+ { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+ { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
+ CMT1_CMT11, AP_ARM1 } },
+ { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2,
+ CMT1_CMT12, TPU4 } },
+ { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+ MFI_MFIM, USBHS } },
+ { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+ _3DG_SGX540, CMT1_CMT10 } },
+ { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+ SCIFA2, SCIFA3 } },
+ { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+ FLCTL, SDHI0 } },
+ { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+ { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } },
+ { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+ { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+ { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+ { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+ { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } },
+ { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+ { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } },
+ { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } },
+ { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+ { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } },
+ { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } },
+ { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+ { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+ CMT14, CMT15 } },
+ { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+ { 0xe6900000, 16, 2, /* ICR1A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900004, 16, 2, /* ICR2A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900008, 16, 2, /* ICR3A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690000c, 16, 2, /* ICR4A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+ { 0xe6900020, 0, 8, /* INTREQ00A */
+ { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+ { 0xe6900024, 0, 8, /* INTREQ10A */
+ { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+ { 0xe6900028, 0, 8, /* INTREQ20A */
+ { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+ { 0xe690002c, 0, 8, /* INTREQ30A */
+ { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7377-intca",
+ intca_vectors, intca_groups,
+ intca_mask_registers, intca_prio_registers,
+ intca_sense_registers, intca_ack_registers);
+
+void __init sh7377_init_irq(void)
+{
+ register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
new file mode 100644
index 0000000..128555e
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -0,0 +1,1801 @@
+/*
+ * sh7367 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx) \
+ _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
+ _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
+ _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
+ _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
+ _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx) \
+ _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
+ _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
+ _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
+ _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
+ _10(fn, pfx##9, sfx)
+
+#define _273(fn, pfx, sfx) \
+ _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
+ _10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx), \
+ _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
+ _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
+ _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
+ _10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx), \
+ _1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_273(str) _273(_PORT, PORT, str)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+ PINMUX_INPUT_END,
+
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+ PINMUX_INPUT_PULLUP_END,
+
+ PINMUX_INPUT_PULLDOWN_BEGIN,
+ PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+ PINMUX_INPUT_PULLDOWN_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+ PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+ PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+ PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+ PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+ PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+ PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+ PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+ PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+ PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+
+ MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+ /* Special Pull-up / Pull-down Functions */
+ PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK,
+ PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK,
+ PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK,
+ PORT58_KEYIN6_PU_MARK,
+
+ /* 49-1 */
+ VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK,
+ CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK,
+ CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK,
+ CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK,
+ CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK,
+ CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK,
+ CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK,
+ RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK,
+ STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+ MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK,
+ XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK,
+ IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK,
+ M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+ XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+ XCTS1_MARK, SCIFA4_CTS_MARK,
+
+ /* 49-2 */
+ HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK,
+ HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK,
+ HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK,
+ HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK,
+ HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK,
+ HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK,
+ HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK,
+ HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK,
+ HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK,
+ HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK,
+ HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK,
+ HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK,
+ HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK,
+ HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK,
+ HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK,
+ HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK,
+ B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK,
+ HSU_SDI_MARK, PORT55_KEYIN3_MARK,
+ HSU_SCO_MARK, PORT56_KEYIN4_MARK,
+ HSU_DREQ_MARK, PORT57_KEYIN5_MARK,
+ HSU_DACK_MARK, PORT58_KEYIN6_MARK,
+ HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK,
+ HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK,
+ PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK,
+ XTALB1L_MARK,
+ GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+ GPS_AGC2_MARK, SCIFA0_SCK_MARK,
+ GPS_AGC3_MARK, SCIFA0_TXD_MARK,
+ GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+ GPS_PWRD_MARK, SCIFA0_CTS_MARK,
+ GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK,
+ SIUBOMC_MARK, TPU2TO0_MARK,
+ SIUCKB_MARK, TPU2TO1_MARK,
+ SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK,
+ SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK,
+ SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK,
+ SIUBILR_MARK, TPU3TO1_MARK,
+ SIUBIBT_MARK, TPU3TO2_MARK,
+ SIUBISLD_MARK, TPU3TO3_MARK,
+ NMI_MARK, TPU4TO0_MARK,
+ DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK,
+ IRQ_TMPB_MARK,
+ PWEN_MARK, MFG1_OUT1_MARK,
+ OVCN_MARK, MFG1_IN1_MARK,
+ OVCN2_MARK, MFG1_IN2_MARK,
+
+ /* 49-3 */
+ RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK,
+ USBTERM_MARK, EXTLP_MARK, IDIN_MARK,
+ SCIFA5_CTS_MARK, MFG0_IN1_MARK,
+ SCIFA5_RTS_MARK, MFG0_IN2_MARK,
+ SCIFA5_RXD_MARK,
+ SCIFA5_TXD_MARK,
+ SCIFA5_SCK_MARK, MFG0_OUT1_MARK,
+ A0_EA0_MARK, BS_MARK,
+ A14_EA14_MARK, PORT102_KEYOUT0_MARK,
+ A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK,
+ A16_EA16_MARK, PORT104_KEYOUT2_MARK,
+ DV_VSYNCL_MARK, MSIOF0_SS1_MARK,
+ A17_EA17_MARK, PORT105_KEYOUT3_MARK,
+ DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK,
+ A18_EA18_MARK, PORT106_KEYOUT4_MARK,
+ DV_DL0_MARK, MSIOF0_TSCK_MARK,
+ A19_EA19_MARK, PORT107_KEYOUT5_MARK,
+ DV_DL1_MARK, MSIOF0_TXD_MARK,
+ A20_EA20_MARK, PORT108_KEYIN0_MARK,
+ DV_DL2_MARK, MSIOF0_RSCK_MARK,
+ A21_EA21_MARK, PORT109_KEYIN1_MARK,
+ DV_DL3_MARK, MSIOF0_RSYNC_MARK,
+ A22_EA22_MARK, PORT110_KEYIN2_MARK,
+ DV_DL4_MARK, MSIOF0_MCK0_MARK,
+ A23_EA23_MARK, PORT111_KEYIN3_MARK,
+ DV_DL5_MARK, MSIOF0_MCK1_MARK,
+ A24_EA24_MARK, PORT112_KEYIN4_MARK,
+ DV_DL6_MARK, MSIOF0_RXD_MARK,
+ A25_EA25_MARK, PORT113_KEYIN5_MARK,
+ DV_DL7_MARK, MSIOF0_SS2_MARK,
+ A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK,
+ D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK,
+ D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK,
+ D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK,
+ D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK,
+ D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK,
+ D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK,
+ CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK,
+ CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK,
+ DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK,
+ A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK,
+ WE1_XWR1_MARK, FRB_MARK, CKO_MARK,
+ NBRSTOUT_MARK, NBRST_MARK,
+
+ /* 49-4 */
+ RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK,
+ VIO_VD_MARK, VIO_HD_MARK,
+ VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK,
+ VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK,
+ VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK,
+ VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
+ VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK,
+ VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK,
+ VIO_CKO_MARK,
+ MFG3_IN1_MARK, MFG3_IN2_MARK,
+ M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK,
+ M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK,
+ M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK,
+ M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK,
+ LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK,
+ SIUCKA_MARK, MFG0_OUT2_MARK,
+ LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK,
+ SIUAOLR_MARK, BBIF2_TSYNC1_MARK,
+ LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK,
+ SIUAOBT_MARK, BBIF2_TSCK1_MARK,
+ LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK,
+ SIUAOSLD_MARK, BBIF2_TXD1_MARK,
+ LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK,
+ SIUAISPD_MARK, MFG1_OUT2_MARK,
+ LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK,
+ SIUAILR_MARK, MFG2_OUT2_MARK,
+ LCDD6_MARK, DV_D6_MARK,
+ SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK,
+ LCDD7_MARK, DV_D7_MARK,
+ SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+ LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK,
+ LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK,
+ LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK,
+ LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK,
+ LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK,
+ LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK,
+ LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK,
+ LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK,
+ LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK,
+ LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK,
+ LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK,
+ D26_MARK, ED26_MARK,
+ LCDD19_MARK, MSIOF0L_TSYNC_MARK,
+ D27_MARK, ED27_MARK,
+ LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK,
+ D28_MARK, ED28_MARK,
+ LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK,
+ D29_MARK, ED29_MARK,
+ LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK,
+ D30_MARK, ED30_MARK,
+ LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK,
+ D31_MARK, ED31_MARK,
+ LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK,
+ LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK,
+
+ /* 49-5 */
+ LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+ LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK,
+ LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK,
+ LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK,
+ LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK,
+ VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK,
+ VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK,
+ VIO_VDR_MARK, VIO_HDR_MARK,
+ VIO_CLKR_MARK, VIO_CKOR_MARK,
+ SCIFA1_TXD_MARK, GPS_PGFA0_MARK,
+ SCIFA1_SCK_MARK, GPS_PGFA1_MARK,
+ SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK,
+ SCIFA1_RXD_MARK, SCIFA1_CTS_MARK,
+ MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK,
+ MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK,
+ MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK,
+ MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK,
+ MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK,
+ MSIOF1_RSYNC_MARK, I2C_SCL2_MARK,
+ MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+ MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+ MSIOF1_SS2_MARK,
+ PORT236_IROUT_MARK, IRDA_OUT_MARK,
+ IRDA_IN_MARK, IRDA_FIRSEL_MARK,
+ TPU1TO0_MARK, TS_SPSYNC3_MARK,
+ TPU1TO1_MARK, TS_SDAT3_MARK,
+ TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK,
+ TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK,
+ M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK,
+ M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK,
+ PORT245_IROUT_MARK, M15_RSW_MARK,
+ SOUT3_MARK, SCIFA2_TXD1_MARK,
+ SIN3_MARK, SCIFA2_RXD1_MARK,
+ XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK,
+ XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK,
+ DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+ SDHICLK0_MARK, TCK2_MARK,
+ SDHICD0_MARK,
+ SDHID0_0_MARK, TMS2_MARK,
+ SDHID0_1_MARK, TDO2_MARK,
+ SDHID0_2_MARK, TDI2_MARK,
+ SDHID0_3_MARK, RTCK2_MARK,
+
+ /* 49-6 */
+ SDHICMD0_MARK, TRST2_MARK,
+ SDHIWP0_MARK, EDBGREQ2_MARK,
+ SDHICLK1_MARK, TCK3_MARK,
+ SDHID1_0_MARK, M11_SLCD_SO2_MARK,
+ TS_SPSYNC2_MARK, TMS3_MARK,
+ SDHID1_1_MARK, M9_SLCD_AO2_MARK,
+ TS_SDAT2_MARK, TDO3_MARK,
+ SDHID1_2_MARK, M10_SLCD_CK2_MARK,
+ TS_SDEN2_MARK, TDI3_MARK,
+ SDHID1_3_MARK, M12_SLCD_CE2_MARK,
+ TS_SCK2_MARK, RTCK3_MARK,
+ SDHICMD1_MARK, TRST3_MARK,
+ SDHICLK2_MARK, SCIFB_SCK_MARK,
+ SDHID2_0_MARK, SCIFB_TXD_MARK,
+ SDHID2_1_MARK, SCIFB_CTS_MARK,
+ SDHID2_2_MARK, SCIFB_RXD_MARK,
+ SDHID2_3_MARK, SCIFB_RTS_MARK,
+ SDHICMD2_MARK,
+ RESETOUTS_MARK,
+ DIVLOCK_MARK,
+ PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+ /* specify valid pin states for each pin in GPIO mode */
+
+ /* 49-1 (GPIO) */
+ PORT_DATA_I_PD(0),
+ PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+ PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6),
+ PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+ PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12),
+ PORT_DATA_I_PU(13),
+ PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+ PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19),
+ PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23),
+ PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26),
+ PORT_DATA_I_PD(27), PORT_DATA_I_PD(28),
+ PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32),
+ PORT_DATA_IO_PU(33),
+ PORT_DATA_O(34),
+ PORT_DATA_I_PU(35),
+ PORT_DATA_O(36),
+ PORT_DATA_I_PU_PD(37),
+
+ /* 49-2 (GPIO) */
+ PORT_DATA_IO_PU_PD(38),
+ PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41),
+ PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45),
+ PORT_DATA_O(46), PORT_DATA_O(47),
+ PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50),
+ PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52),
+ PORT_DATA_O(53),
+ PORT_DATA_IO_PD(54),
+ PORT_DATA_I_PU_PD(55),
+ PORT_DATA_IO_PU_PD(56),
+ PORT_DATA_I_PU_PD(57),
+ PORT_DATA_IO_PU_PD(58),
+ PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62),
+ PORT_DATA_O(63),
+ PORT_DATA_I_PU(64),
+ PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68),
+ PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70),
+ PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73),
+ PORT_DATA_I_PD(74),
+ PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76),
+ PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78),
+ PORT_DATA_O(79),
+ PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82),
+ PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84),
+ PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86),
+ PORT_DATA_I_PD(87),
+ PORT_DATA_IO_PU_PD(88),
+ PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90),
+
+ /* 49-3 (GPIO) */
+ PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94),
+ PORT_DATA_I_PU_PD(95),
+ PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98),
+ PORT_DATA_IO_PU_PD(99), PORT_DATA_IO_PU_PD(100),
+ PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103),
+ PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106),
+ PORT_DATA_IO_PD(107),
+ PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
+ PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
+ PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
+ PORT_DATA_IO_PU_PD(114),
+ PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+ PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120),
+ PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123),
+ PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126),
+ PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129),
+ PORT_DATA_IO_PU(130),
+ PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133),
+ PORT_DATA_IO_PU(134),
+ PORT_DATA_O(135), PORT_DATA_O(136),
+ PORT_DATA_I_PU_PD(137),
+ PORT_DATA_IO(138),
+ PORT_DATA_IO_PU_PD(139),
+ PORT_DATA_IO(140), PORT_DATA_IO(141),
+ PORT_DATA_I_PU(142),
+ PORT_DATA_O(143), PORT_DATA_O(144),
+ PORT_DATA_I_PU(145),
+
+ /* 49-4 (GPIO) */
+ PORT_DATA_O(146),
+ PORT_DATA_I_PU_PD(147),
+ PORT_DATA_I_PD(148), PORT_DATA_I_PD(149),
+ PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152),
+ PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155),
+ PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158),
+ PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161),
+ PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164),
+ PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166),
+ PORT_DATA_IO_PU_PD(167),
+ PORT_DATA_O(168),
+ PORT_DATA_I_PD(169), PORT_DATA_I_PD(170),
+ PORT_DATA_O(171),
+ PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+ PORT_DATA_O(174),
+ PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177),
+ PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180),
+ PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183),
+ PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186),
+ PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+ PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192),
+ PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+ PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198),
+ PORT_DATA_O(199),
+ PORT_DATA_IO_PD(200),
+
+ /* 49-5 (GPIO) */
+ PORT_DATA_O(201),
+ PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203),
+ PORT_DATA_I(204),
+ PORT_DATA_O(205),
+ PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208),
+ PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+ PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214),
+ PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216),
+ PORT_DATA_O(217),
+ PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219),
+ PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222),
+ PORT_DATA_I_PD(223),
+ PORT_DATA_I_PU_PD(224),
+ PORT_DATA_O(225),
+ PORT_DATA_IO_PD(226),
+ PORT_DATA_IO_PU_PD(227),
+ PORT_DATA_I_PD(228),
+ PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230),
+ PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232),
+ PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234),
+ PORT_DATA_I_PU_PD(235),
+ PORT_DATA_O(236),
+ PORT_DATA_I_PD(237),
+ PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
+ PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241),
+ PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243),
+ PORT_DATA_O(244),
+ PORT_DATA_IO_PU_PD(245),
+ PORT_DATA_O(246),
+ PORT_DATA_I_PD(247),
+ PORT_DATA_IO_PU_PD(248),
+ PORT_DATA_I_PU_PD(249),
+ PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251),
+ PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253),
+ PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255),
+ PORT_DATA_IO_PU_PD(256),
+
+ /* 49-6 (GPIO) */
+ PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258),
+ PORT_DATA_IO_PD(259),
+ PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262),
+ PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264),
+ PORT_DATA_O(265),
+ PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268),
+ PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270),
+ PORT_DATA_O(271),
+ PORT_DATA_I_PD(272),
+
+ /* Special Pull-up / Pull-down Functions */
+ PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1,
+ PORT48_FN2, PORT48_IN_PU),
+ PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1,
+ PORT49_FN2, PORT49_IN_PU),
+ PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1,
+ PORT50_FN2, PORT50_IN_PU),
+ PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1,
+ PORT55_FN2, PORT55_IN_PU),
+ PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1,
+ PORT56_FN2, PORT56_IN_PU),
+ PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1,
+ PORT57_FN2, PORT57_IN_PU),
+ PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1,
+ PORT58_FN2, PORT58_IN_PU),
+
+ /* 49-1 (FN) */
+ PINMUX_DATA(VBUS0_MARK, PORT0_FN1),
+ PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+ PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+ PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+ PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+ PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+ PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+ PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+ PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+ PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+ PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+ PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+ PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+ PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+ PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+ PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+ PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+ PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+ PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+ PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+ PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+ PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+ PINMUX_DATA(CPORT17_MARK, PORT18_FN1),
+ PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+ PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+ PINMUX_DATA(XRTS2_MARK, PORT19_FN1),
+ PINMUX_DATA(CPORT19_MARK, PORT20_FN1),
+ PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+ PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+ PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+ PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+ PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+ PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+ PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+ PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+ PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+ PINMUX_DATA(MPORT0_MARK, PORT25_FN1),
+ PINMUX_DATA(MPORT1_MARK, PORT26_FN1),
+ PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1),
+ PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1),
+ PINMUX_DATA(XMAINPS_MARK, PORT29_FN1),
+ PINMUX_DATA(XDIVPS_MARK, PORT30_FN1),
+ PINMUX_DATA(XIDRST_MARK, PORT31_FN1),
+ PINMUX_DATA(IDCLK_MARK, PORT32_FN1),
+ PINMUX_DATA(IDIO_MARK, PORT33_FN1),
+ PINMUX_DATA(SOUT1_MARK, PORT34_FN1),
+ PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2),
+ PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3),
+ PINMUX_DATA(SIN1_MARK, PORT35_FN1),
+ PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2),
+ PINMUX_DATA(XWUP_MARK, PORT35_FN3),
+ PINMUX_DATA(XRTS1_MARK, PORT36_FN1),
+ PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2),
+ PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3),
+ PINMUX_DATA(XCTS1_MARK, PORT37_FN1),
+ PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2),
+
+ /* 49-2 (FN) */
+ PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1),
+ PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2),
+ PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3),
+ PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1),
+ PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2),
+ PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3),
+ PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1),
+ PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3),
+ PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1),
+ PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2),
+ PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3),
+ PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1),
+ PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2),
+ PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1),
+ PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2),
+ PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1),
+ PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2),
+ PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1),
+ PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2),
+ PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1),
+ PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2),
+ PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1),
+ PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2),
+ PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1),
+ PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2),
+ PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1),
+ PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2),
+ PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1),
+ PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2),
+ PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1),
+ PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2),
+ PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1),
+ PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2),
+ PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1),
+ PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2),
+ PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1),
+ PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2),
+ PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1),
+ PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2),
+ PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1),
+ PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2),
+ PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1),
+ PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2),
+ PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1),
+ PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2),
+ PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1),
+ PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2),
+ PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1),
+ PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2),
+ PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1),
+ PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1),
+ PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1),
+ PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1),
+ PINMUX_DATA(XTALB1L_MARK, PORT65_FN1),
+ PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1),
+ PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2),
+ PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1),
+ PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2),
+ PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1),
+ PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2),
+ PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1),
+ PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2),
+ PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1),
+ PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2),
+ PINMUX_DATA(GPS_IM_MARK, PORT71_FN1),
+ PINMUX_DATA(GPS_IS_MARK, PORT72_FN1),
+ PINMUX_DATA(GPS_QM_MARK, PORT73_FN1),
+ PINMUX_DATA(GPS_QS_MARK, PORT74_FN1),
+ PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1),
+ PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3),
+ PINMUX_DATA(SIUCKB_MARK, PORT76_FN1),
+ PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3),
+ PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1),
+ PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2),
+ PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3),
+ PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1),
+ PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2),
+ PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3),
+ PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1),
+ PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2),
+ PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3),
+ PINMUX_DATA(SIUBILR_MARK, PORT80_FN1),
+ PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3),
+ PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1),
+ PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3),
+ PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1),
+ PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3),
+ PINMUX_DATA(NMI_MARK, PORT83_FN1),
+ PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3),
+ PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1),
+ PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3),
+ PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3),
+ PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3),
+ PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1),
+ PINMUX_DATA(PWEN_MARK, PORT88_FN1),
+ PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2),
+ PINMUX_DATA(OVCN_MARK, PORT89_FN1),
+ PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2),
+ PINMUX_DATA(OVCN2_MARK, PORT90_FN1),
+ PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2),
+
+ /* 49-3 (FN) */
+ PINMUX_DATA(RFSPO1_MARK, PORT91_FN1),
+ PINMUX_DATA(RFSPO2_MARK, PORT92_FN1),
+ PINMUX_DATA(RFSPO3_MARK, PORT93_FN1),
+ PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2),
+ PINMUX_DATA(USBTERM_MARK, PORT94_FN1),
+ PINMUX_DATA(EXTLP_MARK, PORT94_FN2),
+ PINMUX_DATA(IDIN_MARK, PORT95_FN1),
+ PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1),
+ PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2),
+ PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1),
+ PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2),
+ PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1),
+ PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1),
+ PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1),
+ PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2),
+ PINMUX_DATA(A0_EA0_MARK, PORT101_FN1),
+ PINMUX_DATA(BS_MARK, PORT101_FN2),
+ PINMUX_DATA(A14_EA14_MARK, PORT102_FN1),
+ PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2),
+ PINMUX_DATA(A15_EA15_MARK, PORT103_FN1),
+ PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2),
+ PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3),
+ PINMUX_DATA(A16_EA16_MARK, PORT104_FN1),
+ PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2),
+ PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4),
+ PINMUX_DATA(A17_EA17_MARK, PORT105_FN1),
+ PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2),
+ PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4),
+ PINMUX_DATA(A18_EA18_MARK, PORT106_FN1),
+ PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2),
+ PINMUX_DATA(DV_DL0_MARK, PORT106_FN3),
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4),
+ PINMUX_DATA(A19_EA19_MARK, PORT107_FN1),
+ PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2),
+ PINMUX_DATA(DV_DL1_MARK, PORT107_FN3),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4),
+ PINMUX_DATA(A20_EA20_MARK, PORT108_FN1),
+ PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2),
+ PINMUX_DATA(DV_DL2_MARK, PORT108_FN3),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4),
+ PINMUX_DATA(A21_EA21_MARK, PORT109_FN1),
+ PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2),
+ PINMUX_DATA(DV_DL3_MARK, PORT109_FN3),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4),
+ PINMUX_DATA(A22_EA22_MARK, PORT110_FN1),
+ PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2),
+ PINMUX_DATA(DV_DL4_MARK, PORT110_FN3),
+ PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4),
+ PINMUX_DATA(A23_EA23_MARK, PORT111_FN1),
+ PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2),
+ PINMUX_DATA(DV_DL5_MARK, PORT111_FN3),
+ PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4),
+ PINMUX_DATA(A24_EA24_MARK, PORT112_FN1),
+ PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2),
+ PINMUX_DATA(DV_DL6_MARK, PORT112_FN3),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4),
+ PINMUX_DATA(A25_EA25_MARK, PORT113_FN1),
+ PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2),
+ PINMUX_DATA(DV_DL7_MARK, PORT113_FN3),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4),
+ PINMUX_DATA(A26_MARK, PORT114_FN1),
+ PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2),
+ PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3),
+ PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1),
+ PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1),
+ PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1),
+ PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1),
+ PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1),
+ PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1),
+ PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1),
+ PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1),
+ PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1),
+ PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1),
+ PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1),
+ PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1),
+ PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1),
+ PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1),
+ PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1),
+ PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1),
+ PINMUX_DATA(CS4_MARK, PORT131_FN1),
+ PINMUX_DATA(CS5A_MARK, PORT132_FN1),
+ PINMUX_DATA(CS5B_MARK, PORT133_FN1),
+ PINMUX_DATA(FCE1_MARK, PORT133_FN2),
+ PINMUX_DATA(CS6B_MARK, PORT134_FN1),
+ PINMUX_DATA(XCS2_MARK, PORT134_FN2),
+ PINMUX_DATA(FCE0_MARK, PORT135_FN1),
+ PINMUX_DATA(CS6A_MARK, PORT136_FN1),
+ PINMUX_DATA(DACK0_MARK, PORT136_FN2),
+ PINMUX_DATA(WAIT_MARK, PORT137_FN1),
+ PINMUX_DATA(DREQ0_MARK, PORT137_FN2),
+ PINMUX_DATA(RD_XRD_MARK, PORT138_FN1),
+ PINMUX_DATA(A27_MARK, PORT139_FN1),
+ PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2),
+ PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1),
+ PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1),
+ PINMUX_DATA(FRB_MARK, PORT142_FN1),
+ PINMUX_DATA(CKO_MARK, PORT143_FN1),
+ PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1),
+ PINMUX_DATA(NBRST_MARK, PORT145_FN1),
+
+ /* 49-4 (FN) */
+ PINMUX_DATA(RFSPO0_MARK, PORT146_FN1),
+ PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2),
+ PINMUX_DATA(TSTMD_MARK, PORT147_FN1),
+ PINMUX_DATA(VIO_VD_MARK, PORT148_FN1),
+ PINMUX_DATA(VIO_HD_MARK, PORT149_FN1),
+ PINMUX_DATA(VIO_D0_MARK, PORT150_FN1),
+ PINMUX_DATA(VIO_D1_MARK, PORT151_FN1),
+ PINMUX_DATA(VIO_D2_MARK, PORT152_FN1),
+ PINMUX_DATA(VIO_D3_MARK, PORT153_FN1),
+ PINMUX_DATA(VIO_D4_MARK, PORT154_FN1),
+ PINMUX_DATA(VIO_D5_MARK, PORT155_FN1),
+ PINMUX_DATA(VIO_D6_MARK, PORT156_FN1),
+ PINMUX_DATA(VIO_D7_MARK, PORT157_FN1),
+ PINMUX_DATA(VIO_D8_MARK, PORT158_FN1),
+ PINMUX_DATA(VIO_D9_MARK, PORT159_FN1),
+ PINMUX_DATA(VIO_D10_MARK, PORT160_FN1),
+ PINMUX_DATA(VIO_D11_MARK, PORT161_FN1),
+ PINMUX_DATA(VIO_D12_MARK, PORT162_FN1),
+ PINMUX_DATA(VIO_D13_MARK, PORT163_FN1),
+ PINMUX_DATA(VIO_D14_MARK, PORT164_FN1),
+ PINMUX_DATA(VIO_D15_MARK, PORT165_FN1),
+ PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1),
+ PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1),
+ PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1),
+ PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2),
+ PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2),
+ PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1),
+ PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2),
+ PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3),
+ PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1),
+ PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2),
+ PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3),
+ PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1),
+ PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2),
+ PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3),
+ PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1),
+ PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2),
+ PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3),
+ PINMUX_DATA(LCDD0_MARK, PORT175_FN1),
+ PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2),
+ PINMUX_DATA(DV_D0_MARK, PORT175_FN3),
+ PINMUX_DATA(SIUCKA_MARK, PORT175_FN4),
+ PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5),
+ PINMUX_DATA(LCDD1_MARK, PORT176_FN1),
+ PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2),
+ PINMUX_DATA(DV_D1_MARK, PORT176_FN3),
+ PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4),
+ PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5),
+ PINMUX_DATA(LCDD2_MARK, PORT177_FN1),
+ PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2),
+ PINMUX_DATA(DV_D2_MARK, PORT177_FN3),
+ PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4),
+ PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5),
+ PINMUX_DATA(LCDD3_MARK, PORT178_FN1),
+ PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2),
+ PINMUX_DATA(DV_D3_MARK, PORT178_FN3),
+ PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4),
+ PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5),
+ PINMUX_DATA(LCDD4_MARK, PORT179_FN1),
+ PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2),
+ PINMUX_DATA(DV_D4_MARK, PORT179_FN3),
+ PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4),
+ PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5),
+ PINMUX_DATA(LCDD5_MARK, PORT180_FN1),
+ PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2),
+ PINMUX_DATA(DV_D5_MARK, PORT180_FN3),
+ PINMUX_DATA(SIUAILR_MARK, PORT180_FN4),
+ PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5),
+ PINMUX_DATA(LCDD6_MARK, PORT181_FN1),
+ PINMUX_DATA(DV_D6_MARK, PORT181_FN3),
+ PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4),
+ PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5),
+ PINMUX_DATA(XWR2_MARK, PORT181_FN7),
+ PINMUX_DATA(LCDD7_MARK, PORT182_FN1),
+ PINMUX_DATA(DV_D7_MARK, PORT182_FN3),
+ PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4),
+ PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5),
+ PINMUX_DATA(XWR3_MARK, PORT182_FN7),
+ PINMUX_DATA(LCDD8_MARK, PORT183_FN1),
+ PINMUX_DATA(DV_D8_MARK, PORT183_FN3),
+ PINMUX_DATA(D16_MARK, PORT183_FN6),
+ PINMUX_DATA(ED16_MARK, PORT183_FN7),
+ PINMUX_DATA(LCDD9_MARK, PORT184_FN1),
+ PINMUX_DATA(DV_D9_MARK, PORT184_FN3),
+ PINMUX_DATA(D17_MARK, PORT184_FN6),
+ PINMUX_DATA(ED17_MARK, PORT184_FN7),
+ PINMUX_DATA(LCDD10_MARK, PORT185_FN1),
+ PINMUX_DATA(DV_D10_MARK, PORT185_FN3),
+ PINMUX_DATA(D18_MARK, PORT185_FN6),
+ PINMUX_DATA(ED18_MARK, PORT185_FN7),
+ PINMUX_DATA(LCDD11_MARK, PORT186_FN1),
+ PINMUX_DATA(DV_D11_MARK, PORT186_FN3),
+ PINMUX_DATA(D19_MARK, PORT186_FN6),
+ PINMUX_DATA(ED19_MARK, PORT186_FN7),
+ PINMUX_DATA(LCDD12_MARK, PORT187_FN1),
+ PINMUX_DATA(DV_D12_MARK, PORT187_FN3),
+ PINMUX_DATA(D20_MARK, PORT187_FN6),
+ PINMUX_DATA(ED20_MARK, PORT187_FN7),
+ PINMUX_DATA(LCDD13_MARK, PORT188_FN1),
+ PINMUX_DATA(DV_D13_MARK, PORT188_FN3),
+ PINMUX_DATA(D21_MARK, PORT188_FN6),
+ PINMUX_DATA(ED21_MARK, PORT188_FN7),
+ PINMUX_DATA(LCDD14_MARK, PORT189_FN1),
+ PINMUX_DATA(DV_D14_MARK, PORT189_FN3),
+ PINMUX_DATA(D22_MARK, PORT189_FN6),
+ PINMUX_DATA(ED22_MARK, PORT189_FN7),
+ PINMUX_DATA(LCDD15_MARK, PORT190_FN1),
+ PINMUX_DATA(DV_D15_MARK, PORT190_FN3),
+ PINMUX_DATA(D23_MARK, PORT190_FN6),
+ PINMUX_DATA(ED23_MARK, PORT190_FN7),
+ PINMUX_DATA(LCDD16_MARK, PORT191_FN1),
+ PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3),
+ PINMUX_DATA(D24_MARK, PORT191_FN6),
+ PINMUX_DATA(ED24_MARK, PORT191_FN7),
+ PINMUX_DATA(LCDD17_MARK, PORT192_FN1),
+ PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3),
+ PINMUX_DATA(D25_MARK, PORT192_FN6),
+ PINMUX_DATA(ED25_MARK, PORT192_FN7),
+ PINMUX_DATA(LCDD18_MARK, PORT193_FN1),
+ PINMUX_DATA(DREQ2_MARK, PORT193_FN2),
+ PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5),
+ PINMUX_DATA(D26_MARK, PORT193_FN6),
+ PINMUX_DATA(ED26_MARK, PORT193_FN7),
+ PINMUX_DATA(LCDD19_MARK, PORT194_FN1),
+ PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5),
+ PINMUX_DATA(D27_MARK, PORT194_FN6),
+ PINMUX_DATA(ED27_MARK, PORT194_FN7),
+ PINMUX_DATA(LCDD20_MARK, PORT195_FN1),
+ PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2),
+ PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5),
+ PINMUX_DATA(D28_MARK, PORT195_FN6),
+ PINMUX_DATA(ED28_MARK, PORT195_FN7),
+ PINMUX_DATA(LCDD21_MARK, PORT196_FN1),
+ PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2),
+ PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5),
+ PINMUX_DATA(D29_MARK, PORT196_FN6),
+ PINMUX_DATA(ED29_MARK, PORT196_FN7),
+ PINMUX_DATA(LCDD22_MARK, PORT197_FN1),
+ PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2),
+ PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5),
+ PINMUX_DATA(D30_MARK, PORT197_FN6),
+ PINMUX_DATA(ED30_MARK, PORT197_FN7),
+ PINMUX_DATA(LCDD23_MARK, PORT198_FN1),
+ PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2),
+ PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5),
+ PINMUX_DATA(D31_MARK, PORT198_FN6),
+ PINMUX_DATA(ED31_MARK, PORT198_FN7),
+ PINMUX_DATA(LCDDCK_MARK, PORT199_FN1),
+ PINMUX_DATA(LCDWR_MARK, PORT199_FN2),
+ PINMUX_DATA(DV_CKO_MARK, PORT199_FN3),
+ PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4),
+ PINMUX_DATA(LCDRD_MARK, PORT200_FN1),
+ PINMUX_DATA(DACK2_MARK, PORT200_FN2),
+ PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5),
+
+ /* 49-5 (FN) */
+ PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1),
+ PINMUX_DATA(LCDCS_MARK, PORT201_FN2),
+ PINMUX_DATA(LCDCS2_MARK, PORT201_FN3),
+ PINMUX_DATA(DACK3_MARK, PORT201_FN4),
+ PINMUX_DATA(LCDDISP_MARK, PORT202_FN1),
+ PINMUX_DATA(LCDRS_MARK, PORT202_FN2),
+ PINMUX_DATA(DREQ3_MARK, PORT202_FN4),
+ PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5),
+ PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1),
+ PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2),
+ PINMUX_DATA(DV_CKI_MARK, PORT203_FN3),
+ PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1),
+ PINMUX_DATA(DREQ1_MARK, PORT204_FN3),
+ PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5),
+ PINMUX_DATA(LCDDON_MARK, PORT205_FN1),
+ PINMUX_DATA(LCDDON2_MARK, PORT205_FN2),
+ PINMUX_DATA(DACK1_MARK, PORT205_FN3),
+ PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5),
+ PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1),
+ PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1),
+ PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1),
+ PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1),
+ PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1),
+ PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1),
+ PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1),
+ PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1),
+ PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1),
+ PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1),
+ PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1),
+ PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1),
+ PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2),
+ PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3),
+ PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2),
+ PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3),
+ PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2),
+ PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3),
+ PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2),
+ PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2),
+ PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1),
+ PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2),
+ PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3),
+ PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1),
+ PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2),
+ PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3),
+ PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1),
+ PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2),
+ PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1),
+ PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2),
+ PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1),
+ PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1),
+ PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3),
+ PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1),
+ PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1),
+ PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1),
+ PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2),
+ PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1),
+ PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1),
+ PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2),
+ PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2),
+ PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1),
+ PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3),
+ PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4),
+ PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3),
+ PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4),
+ PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3),
+ PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4),
+ PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5),
+ PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3),
+ PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5),
+ PINMUX_DATA(M13_BSW_MARK, PORT243_FN2),
+ PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5),
+ PINMUX_DATA(M14_GSW_MARK, PORT244_FN2),
+ PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5),
+ PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1),
+ PINMUX_DATA(M15_RSW_MARK, PORT245_FN2),
+ PINMUX_DATA(SOUT3_MARK, PORT246_FN1),
+ PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2),
+ PINMUX_DATA(SIN3_MARK, PORT247_FN1),
+ PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2),
+ PINMUX_DATA(XRTS3_MARK, PORT248_FN1),
+ PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2),
+ PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5),
+ PINMUX_DATA(XCTS3_MARK, PORT249_FN1),
+ PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2),
+ PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5),
+ PINMUX_DATA(DINT_MARK, PORT250_FN1),
+ PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2),
+ PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4),
+ PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1),
+ PINMUX_DATA(TCK2_MARK, PORT251_FN2),
+ PINMUX_DATA(SDHICD0_MARK, PORT252_FN1),
+ PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1),
+ PINMUX_DATA(TMS2_MARK, PORT253_FN2),
+ PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1),
+ PINMUX_DATA(TDO2_MARK, PORT254_FN2),
+ PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1),
+ PINMUX_DATA(TDI2_MARK, PORT255_FN2),
+ PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1),
+ PINMUX_DATA(RTCK2_MARK, PORT256_FN2),
+
+ /* 49-6 (FN) */
+ PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1),
+ PINMUX_DATA(TRST2_MARK, PORT257_FN2),
+ PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1),
+ PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2),
+ PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1),
+ PINMUX_DATA(TCK3_MARK, PORT259_FN4),
+ PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1),
+ PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2),
+ PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3),
+ PINMUX_DATA(TMS3_MARK, PORT260_FN4),
+ PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1),
+ PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2),
+ PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3),
+ PINMUX_DATA(TDO3_MARK, PORT261_FN4),
+ PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1),
+ PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2),
+ PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3),
+ PINMUX_DATA(TDI3_MARK, PORT262_FN4),
+ PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1),
+ PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2),
+ PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3),
+ PINMUX_DATA(RTCK3_MARK, PORT263_FN4),
+ PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1),
+ PINMUX_DATA(TRST3_MARK, PORT264_FN4),
+ PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1),
+ PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2),
+ PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1),
+ PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2),
+ PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1),
+ PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2),
+ PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1),
+ PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2),
+ PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1),
+ PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2),
+ PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1),
+ PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1),
+ PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ /* 49-1 -> 49-6 (GPIO) */
+ GPIO_PORT_273(),
+
+ /* Special Pull-up / Pull-down Functions */
+ GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
+ GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU),
+ GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU),
+ GPIO_FN(PORT58_KEYIN6_PU),
+
+ /* 49-1 (FN) */
+ GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2),
+ GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6),
+ GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10),
+ GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+ GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+ GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2),
+ GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20),
+ GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22),
+ GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+ GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2),
+ GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK),
+ GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD),
+ GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+ GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+ GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+
+ /* 49-2 (FN) */
+ GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0),
+ GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1),
+ GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC),
+ GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK),
+ GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0),
+ GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1),
+ GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2),
+ GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3),
+ GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4),
+ GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5),
+ GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0),
+ GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1),
+ GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2),
+ GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC),
+ GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK),
+ GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD),
+ GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD),
+ GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3),
+ GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4),
+ GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5),
+ GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6),
+ GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1),
+ GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2),
+ GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A),
+ GPIO_FN(XTALB1L),
+ GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+ GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK),
+ GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD),
+ GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+ GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS),
+ GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS),
+ GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0),
+ GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1),
+ GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2),
+ GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3),
+ GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0),
+ GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1),
+ GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2),
+ GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3),
+ GPIO_FN(NMI), GPIO_FN(TPU4TO0),
+ GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3),
+ GPIO_FN(IRQ_TMPB),
+ GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1),
+ GPIO_FN(OVCN), GPIO_FN(MFG1_IN1),
+ GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2),
+
+ /* 49-3 (FN) */
+ GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3),
+ GPIO_FN(PORT93_VIO_CKO2),
+ GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN),
+ GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1),
+ GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2),
+ GPIO_FN(SCIFA5_RXD),
+ GPIO_FN(SCIFA5_TXD),
+ GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1),
+ GPIO_FN(A0_EA0), GPIO_FN(BS),
+ GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0),
+ GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL),
+ GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2),
+ GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1),
+ GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3),
+ GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC),
+ GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4),
+ GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK),
+ GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5),
+ GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD),
+ GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0),
+ GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK),
+ GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1),
+ GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC),
+ GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2),
+ GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0),
+ GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3),
+ GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1),
+ GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4),
+ GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD),
+ GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5),
+ GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2),
+ GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL),
+ GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2),
+ GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5),
+ GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8),
+ GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11),
+ GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13),
+ GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15),
+ GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1),
+ GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A),
+ GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD),
+ GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE),
+ GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO),
+ GPIO_FN(NBRSTOUT), GPIO_FN(NBRST),
+
+ /* 49-4 (FN) */
+ GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD),
+ GPIO_FN(VIO_VD), GPIO_FN(VIO_HD),
+ GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2),
+ GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5),
+ GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8),
+ GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11),
+ GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14),
+ GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
+ GPIO_FN(VIO_CKO),
+ GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2),
+ GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0),
+ GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1),
+ GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2),
+ GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3),
+ GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0),
+ GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2),
+ GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1),
+ GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1),
+ GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2),
+ GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1),
+ GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3),
+ GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1),
+ GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4),
+ GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2),
+ GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5),
+ GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2),
+ GPIO_FN(LCDD6), GPIO_FN(DV_D6),
+ GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2),
+ GPIO_FN(LCDD7), GPIO_FN(DV_D7),
+ GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3),
+ GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16),
+ GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17),
+ GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18),
+ GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19),
+ GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20),
+ GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21),
+ GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22),
+ GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23),
+ GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24),
+ GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25),
+ GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK),
+ GPIO_FN(D26), GPIO_FN(ED26),
+ GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC),
+ GPIO_FN(D27), GPIO_FN(ED27),
+ GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+ GPIO_FN(D28), GPIO_FN(ED28),
+ GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+ GPIO_FN(D29), GPIO_FN(ED29),
+ GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1),
+ GPIO_FN(D30), GPIO_FN(ED30),
+ GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2),
+ GPIO_FN(D31), GPIO_FN(ED31),
+ GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD),
+ GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC),
+
+ /* 49-5 (FN) */
+ GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+ GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK),
+ GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI),
+ GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD),
+ GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD),
+ GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3),
+ GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7),
+ GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR),
+ GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR),
+ GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0),
+ GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1),
+ GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON),
+ GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS),
+ GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD),
+ GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2),
+ GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2),
+ GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD),
+ GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2),
+ GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2),
+ GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+ GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+ GPIO_FN(MSIOF1_SS2),
+ GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT),
+ GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
+ GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3),
+ GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3),
+ GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1),
+ GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK),
+ GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC),
+ GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD),
+ GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW),
+ GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1),
+ GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1),
+ GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2),
+ GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD),
+ GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+ GPIO_FN(SDHICLK0), GPIO_FN(TCK2),
+ GPIO_FN(SDHICD0),
+ GPIO_FN(SDHID0_0), GPIO_FN(TMS2),
+ GPIO_FN(SDHID0_1), GPIO_FN(TDO2),
+ GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+ GPIO_FN(SDHID0_3), GPIO_FN(RTCK2),
+
+ /* 49-6 (FN) */
+ GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+ GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+ GPIO_FN(SDHICLK1), GPIO_FN(TCK3),
+ GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2),
+ GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3),
+ GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2),
+ GPIO_FN(TS_SDAT2), GPIO_FN(TDO3),
+ GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2),
+ GPIO_FN(TS_SDEN2), GPIO_FN(TDI3),
+ GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2),
+ GPIO_FN(TS_SCK2), GPIO_FN(RTCK3),
+ GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+ GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK),
+ GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD),
+ GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS),
+ GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD),
+ GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS),
+ GPIO_FN(SDHICMD2),
+ GPIO_FN(RESETOUTS),
+ GPIO_FN(DIVLOCK),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
+ PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ PORTCR(0, 0xe6050000), /* PORT0CR */
+ PORTCR(1, 0xe6050001), /* PORT1CR */
+ PORTCR(2, 0xe6050002), /* PORT2CR */
+ PORTCR(3, 0xe6050003), /* PORT3CR */
+ PORTCR(4, 0xe6050004), /* PORT4CR */
+ PORTCR(5, 0xe6050005), /* PORT5CR */
+ PORTCR(6, 0xe6050006), /* PORT6CR */
+ PORTCR(7, 0xe6050007), /* PORT7CR */
+ PORTCR(8, 0xe6050008), /* PORT8CR */
+ PORTCR(9, 0xe6050009), /* PORT9CR */
+
+ PORTCR(10, 0xe605000a), /* PORT10CR */
+ PORTCR(11, 0xe605000b), /* PORT11CR */
+ PORTCR(12, 0xe605000c), /* PORT12CR */
+ PORTCR(13, 0xe605000d), /* PORT13CR */
+ PORTCR(14, 0xe605000e), /* PORT14CR */
+ PORTCR(15, 0xe605000f), /* PORT15CR */
+ PORTCR(16, 0xe6050010), /* PORT16CR */
+ PORTCR(17, 0xe6050011), /* PORT17CR */
+ PORTCR(18, 0xe6050012), /* PORT18CR */
+ PORTCR(19, 0xe6050013), /* PORT19CR */
+
+ PORTCR(20, 0xe6050014), /* PORT20CR */
+ PORTCR(21, 0xe6050015), /* PORT21CR */
+ PORTCR(22, 0xe6050016), /* PORT22CR */
+ PORTCR(23, 0xe6050017), /* PORT23CR */
+ PORTCR(24, 0xe6050018), /* PORT24CR */
+ PORTCR(25, 0xe6050019), /* PORT25CR */
+ PORTCR(26, 0xe605001a), /* PORT26CR */
+ PORTCR(27, 0xe605001b), /* PORT27CR */
+ PORTCR(28, 0xe605001c), /* PORT28CR */
+ PORTCR(29, 0xe605001d), /* PORT29CR */
+
+ PORTCR(30, 0xe605001e), /* PORT30CR */
+ PORTCR(31, 0xe605001f), /* PORT31CR */
+ PORTCR(32, 0xe6050020), /* PORT32CR */
+ PORTCR(33, 0xe6050021), /* PORT33CR */
+ PORTCR(34, 0xe6050022), /* PORT34CR */
+ PORTCR(35, 0xe6050023), /* PORT35CR */
+ PORTCR(36, 0xe6050024), /* PORT36CR */
+ PORTCR(37, 0xe6050025), /* PORT37CR */
+ PORTCR(38, 0xe6050026), /* PORT38CR */
+ PORTCR(39, 0xe6050027), /* PORT39CR */
+
+ PORTCR(40, 0xe6050028), /* PORT40CR */
+ PORTCR(41, 0xe6050029), /* PORT41CR */
+ PORTCR(42, 0xe605002a), /* PORT42CR */
+ PORTCR(43, 0xe605002b), /* PORT43CR */
+ PORTCR(44, 0xe605002c), /* PORT44CR */
+ PORTCR(45, 0xe605002d), /* PORT45CR */
+ PORTCR(46, 0xe605002e), /* PORT46CR */
+ PORTCR(47, 0xe605002f), /* PORT47CR */
+ PORTCR(48, 0xe6050030), /* PORT48CR */
+ PORTCR(49, 0xe6050031), /* PORT49CR */
+
+ PORTCR(50, 0xe6050032), /* PORT50CR */
+ PORTCR(51, 0xe6050033), /* PORT51CR */
+ PORTCR(52, 0xe6050034), /* PORT52CR */
+ PORTCR(53, 0xe6050035), /* PORT53CR */
+ PORTCR(54, 0xe6050036), /* PORT54CR */
+ PORTCR(55, 0xe6050037), /* PORT55CR */
+ PORTCR(56, 0xe6050038), /* PORT56CR */
+ PORTCR(57, 0xe6050039), /* PORT57CR */
+ PORTCR(58, 0xe605003a), /* PORT58CR */
+ PORTCR(59, 0xe605003b), /* PORT59CR */
+
+ PORTCR(60, 0xe605003c), /* PORT60CR */
+ PORTCR(61, 0xe605003d), /* PORT61CR */
+ PORTCR(62, 0xe605003e), /* PORT62CR */
+ PORTCR(63, 0xe605003f), /* PORT63CR */
+ PORTCR(64, 0xe6050040), /* PORT64CR */
+ PORTCR(65, 0xe6050041), /* PORT65CR */
+ PORTCR(66, 0xe6050042), /* PORT66CR */
+ PORTCR(67, 0xe6050043), /* PORT67CR */
+ PORTCR(68, 0xe6050044), /* PORT68CR */
+ PORTCR(69, 0xe6050045), /* PORT69CR */
+
+ PORTCR(70, 0xe6050046), /* PORT70CR */
+ PORTCR(71, 0xe6050047), /* PORT71CR */
+ PORTCR(72, 0xe6050048), /* PORT72CR */
+ PORTCR(73, 0xe6050049), /* PORT73CR */
+ PORTCR(74, 0xe605004a), /* PORT74CR */
+ PORTCR(75, 0xe605004b), /* PORT75CR */
+ PORTCR(76, 0xe605004c), /* PORT76CR */
+ PORTCR(77, 0xe605004d), /* PORT77CR */
+ PORTCR(78, 0xe605004e), /* PORT78CR */
+ PORTCR(79, 0xe605004f), /* PORT79CR */
+
+ PORTCR(80, 0xe6050050), /* PORT80CR */
+ PORTCR(81, 0xe6050051), /* PORT81CR */
+ PORTCR(82, 0xe6050052), /* PORT82CR */
+ PORTCR(83, 0xe6050053), /* PORT83CR */
+ PORTCR(84, 0xe6050054), /* PORT84CR */
+ PORTCR(85, 0xe6050055), /* PORT85CR */
+ PORTCR(86, 0xe6050056), /* PORT86CR */
+ PORTCR(87, 0xe6050057), /* PORT87CR */
+ PORTCR(88, 0xe6051058), /* PORT88CR */
+ PORTCR(89, 0xe6051059), /* PORT89CR */
+
+ PORTCR(90, 0xe605105a), /* PORT90CR */
+ PORTCR(91, 0xe605105b), /* PORT91CR */
+ PORTCR(92, 0xe605105c), /* PORT92CR */
+ PORTCR(93, 0xe605105d), /* PORT93CR */
+ PORTCR(94, 0xe605105e), /* PORT94CR */
+ PORTCR(95, 0xe605105f), /* PORT95CR */
+ PORTCR(96, 0xe6051060), /* PORT96CR */
+ PORTCR(97, 0xe6051061), /* PORT97CR */
+ PORTCR(98, 0xe6051062), /* PORT98CR */
+ PORTCR(99, 0xe6051063), /* PORT99CR */
+
+ PORTCR(100, 0xe6051064), /* PORT100CR */
+ PORTCR(101, 0xe6051065), /* PORT101CR */
+ PORTCR(102, 0xe6051066), /* PORT102CR */
+ PORTCR(103, 0xe6051067), /* PORT103CR */
+ PORTCR(104, 0xe6051068), /* PORT104CR */
+ PORTCR(105, 0xe6051069), /* PORT105CR */
+ PORTCR(106, 0xe605106a), /* PORT106CR */
+ PORTCR(107, 0xe605106b), /* PORT107CR */
+ PORTCR(108, 0xe605106c), /* PORT108CR */
+ PORTCR(109, 0xe605106d), /* PORT109CR */
+
+ PORTCR(110, 0xe605106e), /* PORT110CR */
+ PORTCR(111, 0xe605106f), /* PORT111CR */
+ PORTCR(112, 0xe6051070), /* PORT112CR */
+ PORTCR(113, 0xe6051071), /* PORT113CR */
+ PORTCR(114, 0xe6051072), /* PORT114CR */
+ PORTCR(115, 0xe6051073), /* PORT115CR */
+ PORTCR(116, 0xe6051074), /* PORT116CR */
+ PORTCR(117, 0xe6051075), /* PORT117CR */
+ PORTCR(118, 0xe6051076), /* PORT118CR */
+ PORTCR(119, 0xe6051077), /* PORT119CR */
+
+ PORTCR(120, 0xe6051078), /* PORT120CR */
+ PORTCR(121, 0xe6051079), /* PORT121CR */
+ PORTCR(122, 0xe605107a), /* PORT122CR */
+ PORTCR(123, 0xe605107b), /* PORT123CR */
+ PORTCR(124, 0xe605107c), /* PORT124CR */
+ PORTCR(125, 0xe605107d), /* PORT125CR */
+ PORTCR(126, 0xe605107e), /* PORT126CR */
+ PORTCR(127, 0xe605107f), /* PORT127CR */
+ PORTCR(128, 0xe6051080), /* PORT128CR */
+ PORTCR(129, 0xe6051081), /* PORT129CR */
+
+ PORTCR(130, 0xe6051082), /* PORT130CR */
+ PORTCR(131, 0xe6051083), /* PORT131CR */
+ PORTCR(132, 0xe6051084), /* PORT132CR */
+ PORTCR(133, 0xe6051085), /* PORT133CR */
+ PORTCR(134, 0xe6051086), /* PORT134CR */
+ PORTCR(135, 0xe6051087), /* PORT135CR */
+ PORTCR(136, 0xe6051088), /* PORT136CR */
+ PORTCR(137, 0xe6051089), /* PORT137CR */
+ PORTCR(138, 0xe605108a), /* PORT138CR */
+ PORTCR(139, 0xe605108b), /* PORT139CR */
+
+ PORTCR(140, 0xe605108c), /* PORT140CR */
+ PORTCR(141, 0xe605108d), /* PORT141CR */
+ PORTCR(142, 0xe605108e), /* PORT142CR */
+ PORTCR(143, 0xe605108f), /* PORT143CR */
+ PORTCR(144, 0xe6051090), /* PORT144CR */
+ PORTCR(145, 0xe6051091), /* PORT145CR */
+ PORTCR(146, 0xe6051092), /* PORT146CR */
+ PORTCR(147, 0xe6051093), /* PORT147CR */
+ PORTCR(148, 0xe6051094), /* PORT148CR */
+ PORTCR(149, 0xe6051095), /* PORT149CR */
+
+ PORTCR(150, 0xe6051096), /* PORT150CR */
+ PORTCR(151, 0xe6051097), /* PORT151CR */
+ PORTCR(152, 0xe6051098), /* PORT152CR */
+ PORTCR(153, 0xe6051099), /* PORT153CR */
+ PORTCR(154, 0xe605109a), /* PORT154CR */
+ PORTCR(155, 0xe605109b), /* PORT155CR */
+ PORTCR(156, 0xe605109c), /* PORT156CR */
+ PORTCR(157, 0xe605109d), /* PORT157CR */
+ PORTCR(158, 0xe605109e), /* PORT158CR */
+ PORTCR(159, 0xe605109f), /* PORT159CR */
+
+ PORTCR(160, 0xe60510a0), /* PORT160CR */
+ PORTCR(161, 0xe60510a1), /* PORT161CR */
+ PORTCR(162, 0xe60510a2), /* PORT162CR */
+ PORTCR(163, 0xe60510a3), /* PORT163CR */
+ PORTCR(164, 0xe60510a4), /* PORT164CR */
+ PORTCR(165, 0xe60510a5), /* PORT165CR */
+ PORTCR(166, 0xe60510a6), /* PORT166CR */
+ PORTCR(167, 0xe60510a7), /* PORT167CR */
+ PORTCR(168, 0xe60510a8), /* PORT168CR */
+ PORTCR(169, 0xe60510a9), /* PORT169CR */
+
+ PORTCR(170, 0xe60510aa), /* PORT170CR */
+ PORTCR(171, 0xe60510ab), /* PORT171CR */
+ PORTCR(172, 0xe60510ac), /* PORT172CR */
+ PORTCR(173, 0xe60510ad), /* PORT173CR */
+ PORTCR(174, 0xe60510ae), /* PORT174CR */
+ PORTCR(175, 0xe60520af), /* PORT175CR */
+ PORTCR(176, 0xe60520b0), /* PORT176CR */
+ PORTCR(177, 0xe60520b1), /* PORT177CR */
+ PORTCR(178, 0xe60520b2), /* PORT178CR */
+ PORTCR(179, 0xe60520b3), /* PORT179CR */
+
+ PORTCR(180, 0xe60520b4), /* PORT180CR */
+ PORTCR(181, 0xe60520b5), /* PORT181CR */
+ PORTCR(182, 0xe60520b6), /* PORT182CR */
+ PORTCR(183, 0xe60520b7), /* PORT183CR */
+ PORTCR(184, 0xe60520b8), /* PORT184CR */
+ PORTCR(185, 0xe60520b9), /* PORT185CR */
+ PORTCR(186, 0xe60520ba), /* PORT186CR */
+ PORTCR(187, 0xe60520bb), /* PORT187CR */
+ PORTCR(188, 0xe60520bc), /* PORT188CR */
+ PORTCR(189, 0xe60520bd), /* PORT189CR */
+
+ PORTCR(190, 0xe60520be), /* PORT190CR */
+ PORTCR(191, 0xe60520bf), /* PORT191CR */
+ PORTCR(192, 0xe60520c0), /* PORT192CR */
+ PORTCR(193, 0xe60520c1), /* PORT193CR */
+ PORTCR(194, 0xe60520c2), /* PORT194CR */
+ PORTCR(195, 0xe60520c3), /* PORT195CR */
+ PORTCR(196, 0xe60520c4), /* PORT196CR */
+ PORTCR(197, 0xe60520c5), /* PORT197CR */
+ PORTCR(198, 0xe60520c6), /* PORT198CR */
+ PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+ PORTCR(200, 0xe60520c8), /* PORT200CR */
+ PORTCR(201, 0xe60520c9), /* PORT201CR */
+ PORTCR(202, 0xe60520ca), /* PORT202CR */
+ PORTCR(203, 0xe60520cb), /* PORT203CR */
+ PORTCR(204, 0xe60520cc), /* PORT204CR */
+ PORTCR(205, 0xe60520cd), /* PORT205CR */
+ PORTCR(206, 0xe60520ce), /* PORT206CR */
+ PORTCR(207, 0xe60520cf), /* PORT207CR */
+ PORTCR(208, 0xe60520d0), /* PORT208CR */
+ PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+ PORTCR(210, 0xe60520d2), /* PORT210CR */
+ PORTCR(211, 0xe60520d3), /* PORT211CR */
+ PORTCR(212, 0xe60520d4), /* PORT212CR */
+ PORTCR(213, 0xe60520d5), /* PORT213CR */
+ PORTCR(214, 0xe60520d6), /* PORT214CR */
+ PORTCR(215, 0xe60520d7), /* PORT215CR */
+ PORTCR(216, 0xe60520d8), /* PORT216CR */
+ PORTCR(217, 0xe60520d9), /* PORT217CR */
+ PORTCR(218, 0xe60520da), /* PORT218CR */
+ PORTCR(219, 0xe60520db), /* PORT219CR */
+
+ PORTCR(220, 0xe60520dc), /* PORT220CR */
+ PORTCR(221, 0xe60520dd), /* PORT221CR */
+ PORTCR(222, 0xe60520de), /* PORT222CR */
+ PORTCR(223, 0xe60520df), /* PORT223CR */
+ PORTCR(224, 0xe60520e0), /* PORT224CR */
+ PORTCR(225, 0xe60520e1), /* PORT225CR */
+ PORTCR(226, 0xe60520e2), /* PORT226CR */
+ PORTCR(227, 0xe60520e3), /* PORT227CR */
+ PORTCR(228, 0xe60520e4), /* PORT228CR */
+ PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+ PORTCR(230, 0xe60520e6), /* PORT230CR */
+ PORTCR(231, 0xe60520e7), /* PORT231CR */
+ PORTCR(232, 0xe60520e8), /* PORT232CR */
+ PORTCR(233, 0xe60520e9), /* PORT233CR */
+ PORTCR(234, 0xe60520ea), /* PORT234CR */
+ PORTCR(235, 0xe60520eb), /* PORT235CR */
+ PORTCR(236, 0xe60530ec), /* PORT236CR */
+ PORTCR(237, 0xe60530ed), /* PORT237CR */
+ PORTCR(238, 0xe60530ee), /* PORT238CR */
+ PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+ PORTCR(240, 0xe60530f0), /* PORT240CR */
+ PORTCR(241, 0xe60530f1), /* PORT241CR */
+ PORTCR(242, 0xe60530f2), /* PORT242CR */
+ PORTCR(243, 0xe60530f3), /* PORT243CR */
+ PORTCR(244, 0xe60530f4), /* PORT244CR */
+ PORTCR(245, 0xe60530f5), /* PORT245CR */
+ PORTCR(246, 0xe60530f6), /* PORT246CR */
+ PORTCR(247, 0xe60530f7), /* PORT247CR */
+ PORTCR(248, 0xe60530f8), /* PORT248CR */
+ PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+ PORTCR(250, 0xe60530fa), /* PORT250CR */
+ PORTCR(251, 0xe60530fb), /* PORT251CR */
+ PORTCR(252, 0xe60530fc), /* PORT252CR */
+ PORTCR(253, 0xe60530fd), /* PORT253CR */
+ PORTCR(254, 0xe60530fe), /* PORT254CR */
+ PORTCR(255, 0xe60530ff), /* PORT255CR */
+ PORTCR(256, 0xe6053100), /* PORT256CR */
+ PORTCR(257, 0xe6053101), /* PORT257CR */
+ PORTCR(258, 0xe6053102), /* PORT258CR */
+ PORTCR(259, 0xe6053103), /* PORT259CR */
+
+ PORTCR(260, 0xe6053104), /* PORT260CR */
+ PORTCR(261, 0xe6053105), /* PORT261CR */
+ PORTCR(262, 0xe6053106), /* PORT262CR */
+ PORTCR(263, 0xe6053107), /* PORT263CR */
+ PORTCR(264, 0xe6053108), /* PORT264CR */
+ PORTCR(265, 0xe6053109), /* PORT265CR */
+ PORTCR(266, 0xe605310a), /* PORT266CR */
+ PORTCR(267, 0xe605310b), /* PORT267CR */
+ PORTCR(268, 0xe605310c), /* PORT268CR */
+ PORTCR(269, 0xe605310d), /* PORT269CR */
+
+ PORTCR(270, 0xe605310e), /* PORT270CR */
+ PORTCR(271, 0xe605310f), /* PORT271CR */
+ PORTCR(272, 0xe6053110), /* PORT272CR */
+
+ { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSELBCR_MSEL2_0, MSELBCR_MSEL2_1,
+ 0, 0,
+ 0, 0 }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+ PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+ PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+ PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+ PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+ PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+ PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+ PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+ PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+ PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+ PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+ PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+ PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+ PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+ PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+ PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+ PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+ PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+ PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+ PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+ PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+ PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+ PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+ PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+ PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) {
+ PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+ PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+ PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+ PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+ PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+ PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+ PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+ PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) {
+ PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+ PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+ PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+ PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+ PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+ PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+ PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+ PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) {
+ PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+ PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+ PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+ PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+ PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+ PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+ PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+ PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) {
+ PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+ PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+ PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+ PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+ PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+ PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+ PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+ PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+ PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+ PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+ PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+ PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+ PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+ PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+ PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+ PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, PORT272_DATA,
+ PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+ PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+ PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+ PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+ },
+ { },
+};
+
+static struct pinmux_info sh7367_pinmux_info = {
+ .name = "sh7367_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PORT0,
+ .last_gpio = GPIO_FN_DIVLOCK,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7367_pinmux_init(void)
+{
+ register_pinmux(&sh7367_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
new file mode 100644
index 0000000..9557d09
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -0,0 +1,1637 @@
+/*
+ * sh7372 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on
+ * sh7367 processor support - PFC hardware block
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7372.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx) \
+ _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
+ _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
+ _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
+ _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
+ _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _80(fn, pfx, sfx) \
+ _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
+ _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
+ _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
+ _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx)
+
+#define _190(fn, pfx, sfx) \
+ _10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
+ _10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_ALL(str) _190(_PORT, PORT, str)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ /* PORT0_DATA -> PORT190_DATA */
+ PINMUX_DATA_BEGIN,
+ PORT_ALL(DATA),
+ PINMUX_DATA_END,
+
+ /* PORT0_IN -> PORT190_IN */
+ PINMUX_INPUT_BEGIN,
+ PORT_ALL(IN),
+ PINMUX_INPUT_END,
+
+ /* PORT0_IN_PU -> PORT190_IN_PU */
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PORT_ALL(IN_PU),
+ PINMUX_INPUT_PULLUP_END,
+
+ /* PORT0_IN_PD -> PORT190_IN_PD */
+ PINMUX_INPUT_PULLDOWN_BEGIN,
+ PORT_ALL(IN_PD),
+ PINMUX_INPUT_PULLDOWN_END,
+
+ /* PORT0_OUT -> PORT190_OUT */
+ PINMUX_OUTPUT_BEGIN,
+ PORT_ALL(OUT),
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT190_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT190_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT190_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT190_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT190_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT190_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT190_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT190_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT190_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT190_FN7 */
+
+ MSEL1CR_31_0, MSEL1CR_31_1,
+ MSEL1CR_30_0, MSEL1CR_30_1,
+ MSEL1CR_29_0, MSEL1CR_29_1,
+ MSEL1CR_28_0, MSEL1CR_28_1,
+ MSEL1CR_27_0, MSEL1CR_27_1,
+ MSEL1CR_26_0, MSEL1CR_26_1,
+ MSEL1CR_16_0, MSEL1CR_16_1,
+ MSEL1CR_15_0, MSEL1CR_15_1,
+ MSEL1CR_14_0, MSEL1CR_14_1,
+ MSEL1CR_13_0, MSEL1CR_13_1,
+ MSEL1CR_12_0, MSEL1CR_12_1,
+ MSEL1CR_9_0, MSEL1CR_9_1,
+ MSEL1CR_8_0, MSEL1CR_8_1,
+ MSEL1CR_7_0, MSEL1CR_7_1,
+ MSEL1CR_6_0, MSEL1CR_6_1,
+ MSEL1CR_4_0, MSEL1CR_4_1,
+ MSEL1CR_3_0, MSEL1CR_3_1,
+ MSEL1CR_2_0, MSEL1CR_2_1,
+ MSEL1CR_0_0, MSEL1CR_0_1,
+
+ MSEL3CR_27_0, MSEL3CR_27_1,
+ MSEL3CR_26_0, MSEL3CR_26_1,
+ MSEL3CR_21_0, MSEL3CR_21_1,
+ MSEL3CR_20_0, MSEL3CR_20_1,
+ MSEL3CR_15_0, MSEL3CR_15_1,
+ MSEL3CR_9_0, MSEL3CR_9_1,
+ MSEL3CR_6_0, MSEL3CR_6_1,
+
+ MSEL4CR_19_0, MSEL4CR_19_1,
+ MSEL4CR_18_0, MSEL4CR_18_1,
+ MSEL4CR_17_0, MSEL4CR_17_1,
+ MSEL4CR_16_0, MSEL4CR_16_1,
+ MSEL4CR_15_0, MSEL4CR_15_1,
+ MSEL4CR_14_0, MSEL4CR_14_1,
+ MSEL4CR_10_0, MSEL4CR_10_1,
+ MSEL4CR_6_0, MSEL4CR_6_1,
+ MSEL4CR_4_0, MSEL4CR_4_1,
+ MSEL4CR_1_0, MSEL4CR_1_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+
+ /* IRQ */
+ IRQ0_6_MARK, IRQ0_162_MARK, IRQ1_MARK, IRQ2_4_MARK,
+ IRQ2_5_MARK, IRQ3_8_MARK, IRQ3_16_MARK, IRQ4_17_MARK,
+ IRQ4_163_MARK, IRQ5_MARK, IRQ6_39_MARK, IRQ6_164_MARK,
+ IRQ7_40_MARK, IRQ7_167_MARK, IRQ8_41_MARK, IRQ8_168_MARK,
+ IRQ9_42_MARK, IRQ9_169_MARK, IRQ10_MARK, IRQ11_MARK,
+ IRQ12_80_MARK, IRQ12_137_MARK, IRQ13_81_MARK, IRQ13_145_MARK,
+ IRQ14_82_MARK, IRQ14_146_MARK, IRQ15_83_MARK, IRQ15_147_MARK,
+ IRQ16_84_MARK, IRQ16_170_MARK, IRQ17_MARK, IRQ18_MARK,
+ IRQ19_MARK, IRQ20_MARK, IRQ21_MARK, IRQ22_MARK,
+ IRQ23_MARK, IRQ24_MARK, IRQ25_MARK, IRQ26_121_MARK,
+ IRQ26_172_MARK, IRQ27_122_MARK, IRQ27_180_MARK, IRQ28_123_MARK,
+ IRQ28_181_MARK, IRQ29_129_MARK, IRQ29_182_MARK, IRQ30_130_MARK,
+ IRQ30_183_MARK, IRQ31_138_MARK, IRQ31_184_MARK,
+
+ /* MSIOF0 */
+ MSIOF0_TSYNC_MARK, MSIOF0_TSCK_MARK, MSIOF0_RXD_MARK,
+ MSIOF0_RSCK_MARK, MSIOF0_RSYNC_MARK, MSIOF0_MCK0_MARK,
+ MSIOF0_MCK1_MARK, MSIOF0_SS1_MARK, MSIOF0_SS2_MARK,
+ MSIOF0_TXD_MARK,
+
+ /* MSIOF1 */
+ MSIOF1_TSCK_39_MARK, MSIOF1_TSYNC_40_MARK,
+ MSIOF1_TSCK_88_MARK, MSIOF1_TSYNC_89_MARK,
+ MSIOF1_TXD_41_MARK, MSIOF1_RXD_42_MARK,
+ MSIOF1_TXD_90_MARK, MSIOF1_RXD_91_MARK,
+ MSIOF1_SS1_43_MARK, MSIOF1_SS2_44_MARK,
+ MSIOF1_SS1_92_MARK, MSIOF1_SS2_93_MARK,
+ MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK,
+ MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+
+ /* MSIOF2 */
+ MSIOF2_RSCK_MARK, MSIOF2_RSYNC_MARK, MSIOF2_MCK0_MARK,
+ MSIOF2_MCK1_MARK, MSIOF2_SS1_MARK, MSIOF2_SS2_MARK,
+ MSIOF2_TSYNC_MARK, MSIOF2_TSCK_MARK, MSIOF2_RXD_MARK,
+ MSIOF2_TXD_MARK,
+
+ /* MSIOF3 */
+ BBIF1_RXD_MARK, BBIF1_TSYNC_MARK, BBIF1_TSCK_MARK,
+ BBIF1_TXD_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK,
+ BBIF1_FLOW_MARK, BB_RX_FLOW_N_MARK,
+
+ /* MSIOF4 */
+ BBIF2_TSCK1_MARK, BBIF2_TSYNC1_MARK,
+ BBIF2_TXD1_MARK, BBIF2_RXD_MARK,
+
+ /* FSI */
+ FSIACK_MARK, FSIBCK_MARK, FSIAILR_MARK, FSIAIBT_MARK,
+ FSIAISLD_MARK, FSIAOMC_MARK, FSIAOLR_MARK, FSIAOBT_MARK,
+ FSIAOSLD_MARK, FSIASPDIF_11_MARK, FSIASPDIF_15_MARK,
+
+ /* FMSI */
+ FMSOCK_MARK, FMSOOLR_MARK, FMSIOLR_MARK, FMSOOBT_MARK,
+ FMSIOBT_MARK, FMSOSLD_MARK, FMSOILR_MARK, FMSIILR_MARK,
+ FMSOIBT_MARK, FMSIIBT_MARK, FMSISLD_MARK, FMSICK_MARK,
+
+ /* SCIFA0 */
+ SCIFA0_TXD_MARK, SCIFA0_RXD_MARK, SCIFA0_SCK_MARK,
+ SCIFA0_RTS_MARK, SCIFA0_CTS_MARK,
+
+ /* SCIFA1 */
+ SCIFA1_TXD_MARK, SCIFA1_RXD_MARK, SCIFA1_SCK_MARK,
+ SCIFA1_RTS_MARK, SCIFA1_CTS_MARK,
+
+ /* SCIFA2 */
+ SCIFA2_CTS1_MARK, SCIFA2_RTS1_MARK, SCIFA2_TXD1_MARK,
+ SCIFA2_RXD1_MARK, SCIFA2_SCK1_MARK,
+
+ /* SCIFA3 */
+ SCIFA3_CTS_43_MARK, SCIFA3_CTS_140_MARK, SCIFA3_RTS_44_MARK,
+ SCIFA3_RTS_141_MARK, SCIFA3_SCK_MARK, SCIFA3_TXD_MARK,
+ SCIFA3_RXD_MARK,
+
+ /* SCIFA4 */
+ SCIFA4_RXD_MARK, SCIFA4_TXD_MARK,
+
+ /* SCIFA5 */
+ SCIFA5_RXD_MARK, SCIFA5_TXD_MARK,
+
+ /* SCIFB */
+ SCIFB_SCK_MARK, SCIFB_RTS_MARK, SCIFB_CTS_MARK,
+ SCIFB_TXD_MARK, SCIFB_RXD_MARK,
+
+ /* CEU */
+ VIO_HD_MARK, VIO_CKO1_MARK, VIO_CKO2_MARK, VIO_VD_MARK,
+ VIO_CLK_MARK, VIO_FIELD_MARK, VIO_CKO_MARK,
+ VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, VIO_D3_MARK,
+ VIO_D4_MARK, VIO_D5_MARK, VIO_D6_MARK, VIO_D7_MARK,
+ VIO_D8_MARK, VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
+ VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, VIO_D15_MARK,
+
+ /* USB0 */
+ IDIN_0_MARK, EXTLP_0_MARK, OVCN2_0_MARK, PWEN_0_MARK,
+ OVCN_0_MARK, VBUS0_0_MARK,
+
+ /* USB1 */
+ IDIN_1_18_MARK, IDIN_1_113_MARK,
+ PWEN_1_115_MARK, PWEN_1_138_MARK,
+ OVCN_1_114_MARK, OVCN_1_162_MARK,
+ EXTLP_1_MARK, OVCN2_1_MARK,
+ VBUS0_1_MARK,
+
+ /* GPIO */
+ GPI0_MARK, GPI1_MARK, GPO0_MARK, GPO1_MARK,
+
+ /* BSC */
+ BS_MARK, WE1_MARK,
+ CKO_MARK, WAIT_MARK, RDWR_MARK,
+
+ A0_MARK, A1_MARK, A2_MARK, A3_MARK,
+ A6_MARK, A7_MARK, A8_MARK, A9_MARK,
+ A10_MARK, A11_MARK, A12_MARK, A13_MARK,
+ A14_MARK, A15_MARK, A16_MARK, A17_MARK,
+ A18_MARK, A19_MARK, A20_MARK, A21_MARK,
+ A22_MARK, A23_MARK, A24_MARK, A25_MARK,
+ A26_MARK,
+
+ CS0_MARK, CS2_MARK, CS4_MARK,
+ CS5A_MARK, CS5B_MARK, CS6A_MARK,
+
+ /* BSC/FLCTL */
+ RD_FSC_MARK, WE0_FWE_MARK, A4_FOE_MARK, A5_FCDE_MARK,
+ D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK,
+ D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK,
+ D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK,
+ D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK,
+
+ /* MMCIF(1) */
+ MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK,
+ MMCD0_4_MARK, MMCD0_5_MARK, MMCD0_6_MARK, MMCD0_7_MARK,
+ MMCCMD0_MARK, MMCCLK0_MARK,
+
+ /* MMCIF(2) */
+ MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK,
+ MMCD1_4_MARK, MMCD1_5_MARK, MMCD1_6_MARK, MMCD1_7_MARK,
+ MMCCLK1_MARK, MMCCMD1_MARK,
+
+ /* SPU2 */
+ VINT_I_MARK,
+
+ /* FLCTL */
+ FCE1_MARK, FCE0_MARK, FRB_MARK,
+
+ /* HSI */
+ GP_RX_FLAG_MARK, GP_RX_DATA_MARK, GP_TX_READY_MARK,
+ GP_RX_WAKE_MARK, MP_TX_FLAG_MARK, MP_TX_DATA_MARK,
+ MP_RX_READY_MARK, MP_TX_WAKE_MARK,
+
+ /* MFI */
+ MFIv6_MARK,
+ MFIv4_MARK,
+
+ MEMC_CS0_MARK, MEMC_BUSCLK_MEMC_A0_MARK,
+ MEMC_CS1_MEMC_A1_MARK, MEMC_ADV_MEMC_DREQ0_MARK,
+ MEMC_WAIT_MEMC_DREQ1_MARK, MEMC_NOE_MARK,
+ MEMC_NWE_MARK, MEMC_INT_MARK,
+
+ MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK,
+ MEMC_AD3_MARK, MEMC_AD4_MARK, MEMC_AD5_MARK,
+ MEMC_AD6_MARK, MEMC_AD7_MARK, MEMC_AD8_MARK,
+ MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK,
+ MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK,
+ MEMC_AD15_MARK,
+
+ /* SIM */
+ SIM_RST_MARK, SIM_CLK_MARK, SIM_D_MARK,
+
+ /* TPU */
+ TPU0TO0_MARK, TPU0TO1_MARK,
+ TPU0TO2_93_MARK, TPU0TO2_99_MARK,
+ TPU0TO3_MARK,
+
+ /* I2C2 */
+ I2C_SCL2_MARK, I2C_SDA2_MARK,
+
+ /* I2C3(1) */
+ I2C_SCL3_MARK, I2C_SDA3_MARK,
+
+ /* I2C3(2) */
+ I2C_SCL3S_MARK, I2C_SDA3S_MARK,
+
+ /* I2C4(2) */
+ I2C_SCL4_MARK, I2C_SDA4_MARK,
+
+ /* I2C4(2) */
+ I2C_SCL4S_MARK, I2C_SDA4S_MARK,
+
+ /* KEYSC */
+ KEYOUT0_MARK, KEYIN0_121_MARK, KEYIN0_136_MARK,
+ KEYOUT1_MARK, KEYIN1_122_MARK, KEYIN1_135_MARK,
+ KEYOUT2_MARK, KEYIN2_123_MARK, KEYIN2_134_MARK,
+ KEYOUT3_MARK, KEYIN3_124_MARK, KEYIN3_133_MARK,
+ KEYOUT4_MARK, KEYIN4_MARK,
+ KEYOUT5_MARK, KEYIN5_MARK,
+ KEYOUT6_MARK, KEYIN6_MARK,
+ KEYOUT7_MARK, KEYIN7_MARK,
+
+ /* LCDC */
+ LCDC0_SELECT_MARK,
+ LCDC1_SELECT_MARK,
+ LCDHSYN_MARK, LCDCS_MARK, LCDVSYN_MARK, LCDDCK_MARK,
+ LCDWR_MARK, LCDRD_MARK, LCDDISP_MARK, LCDRS_MARK,
+ LCDLCLK_MARK, LCDDON_MARK,
+
+ LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK,
+ LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK,
+ LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK,
+ LCDD12_MARK, LCDD13_MARK, LCDD14_MARK, LCDD15_MARK,
+ LCDD16_MARK, LCDD17_MARK, LCDD18_MARK, LCDD19_MARK,
+ LCDD20_MARK, LCDD21_MARK, LCDD22_MARK, LCDD23_MARK,
+
+ /* IRDA */
+ IRDA_OUT_MARK, IRDA_IN_MARK, IRDA_FIRSEL_MARK,
+ IROUT_139_MARK, IROUT_140_MARK,
+
+ /* TSIF1 */
+ TS0_1SELECT_MARK,
+ TS0_2SELECT_MARK,
+ TS1_1SELECT_MARK,
+ TS1_2SELECT_MARK,
+
+ TS_SPSYNC1_MARK, TS_SDAT1_MARK,
+ TS_SDEN1_MARK, TS_SCK1_MARK,
+
+ /* TSIF2 */
+ TS_SPSYNC2_MARK, TS_SDAT2_MARK,
+ TS_SDEN2_MARK, TS_SCK2_MARK,
+
+ /* HDMI */
+ HDMI_HPD_MARK, HDMI_CEC_MARK,
+
+ /* SDHI0 */
+ SDHICLK0_MARK, SDHICD0_MARK,
+ SDHICMD0_MARK, SDHIWP0_MARK,
+ SDHID0_0_MARK, SDHID0_1_MARK,
+ SDHID0_2_MARK, SDHID0_3_MARK,
+
+ /* SDHI1 */
+ SDHICLK1_MARK, SDHICMD1_MARK, SDHID1_0_MARK,
+ SDHID1_1_MARK, SDHID1_2_MARK, SDHID1_3_MARK,
+
+ /* SDHI2 */
+ SDHICLK2_MARK, SDHICMD2_MARK, SDHID2_0_MARK,
+ SDHID2_1_MARK, SDHID2_2_MARK, SDHID2_3_MARK,
+
+ /* SDENC */
+ SDENC_CPG_MARK,
+ SDENC_DV_CLKI_MARK,
+
+ PINMUX_MARK_END,
+};
+
+/* PORT_DATA_I_PD(nr) */
+#define _I___D(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_I_PU(nr) */
+#define _I__U_(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_I_PU_PD(nr) */
+#define _I__UD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* PORT_DATA_O(nr) */
+#define __O___(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+/* PORT_DATA_IO(nr) */
+#define _IO___(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN)
+
+/* PORT_DATA_IO_PD(nr) */
+#define _IO__D(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_IO_PU(nr) */
+#define _IO_U_(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_IO_PU_PD(nr) */
+#define _IO_UD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+ /* specify valid pin states for each pin in GPIO mode */
+
+ _IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
+ _I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+
+ __O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
+ __O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+
+ _IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
+ _IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+
+ _IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
+ _IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+
+ _IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
+ _IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+
+ _IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
+ _IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+
+ _IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
+ _IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+
+ _IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
+ _IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+
+ _IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
+ _IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+
+ _IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
+ _IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+
+ _IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
+ _IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+
+ _IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
+ _IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+
+ _IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
+ _IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+
+ _IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
+ _IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+
+ _IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
+ _IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+
+ _IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
+ _I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+
+ __O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
+ _IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+
+ _I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
+ _IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+
+ _IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
+ __O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
+
+ _IO_UD(190),
+
+ /* IRQ */
+ PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0),
+ PINMUX_DATA(IRQ0_162_MARK, PORT162_FN0, MSEL1CR_0_1),
+ PINMUX_DATA(IRQ1_MARK, PORT12_FN0),
+ PINMUX_DATA(IRQ2_4_MARK, PORT4_FN0, MSEL1CR_2_0),
+ PINMUX_DATA(IRQ2_5_MARK, PORT5_FN0, MSEL1CR_2_1),
+ PINMUX_DATA(IRQ3_8_MARK, PORT8_FN0, MSEL1CR_3_0),
+ PINMUX_DATA(IRQ3_16_MARK, PORT16_FN0, MSEL1CR_3_1),
+ PINMUX_DATA(IRQ4_17_MARK, PORT17_FN0, MSEL1CR_4_0),
+ PINMUX_DATA(IRQ4_163_MARK, PORT163_FN0, MSEL1CR_4_1),
+ PINMUX_DATA(IRQ5_MARK, PORT18_FN0),
+ PINMUX_DATA(IRQ6_39_MARK, PORT39_FN0, MSEL1CR_6_0),
+ PINMUX_DATA(IRQ6_164_MARK, PORT164_FN0, MSEL1CR_6_1),
+ PINMUX_DATA(IRQ7_40_MARK, PORT40_FN0, MSEL1CR_7_1),
+ PINMUX_DATA(IRQ7_167_MARK, PORT167_FN0, MSEL1CR_7_0),
+ PINMUX_DATA(IRQ8_41_MARK, PORT41_FN0, MSEL1CR_8_1),
+ PINMUX_DATA(IRQ8_168_MARK, PORT168_FN0, MSEL1CR_8_0),
+ PINMUX_DATA(IRQ9_42_MARK, PORT42_FN0, MSEL1CR_9_0),
+ PINMUX_DATA(IRQ9_169_MARK, PORT169_FN0, MSEL1CR_9_1),
+ PINMUX_DATA(IRQ10_MARK, PORT65_FN0, MSEL1CR_9_1),
+ PINMUX_DATA(IRQ11_MARK, PORT67_FN0),
+ PINMUX_DATA(IRQ12_80_MARK, PORT80_FN0, MSEL1CR_12_0),
+ PINMUX_DATA(IRQ12_137_MARK, PORT137_FN0, MSEL1CR_12_1),
+ PINMUX_DATA(IRQ13_81_MARK, PORT81_FN0, MSEL1CR_13_0),
+ PINMUX_DATA(IRQ13_145_MARK, PORT145_FN0, MSEL1CR_13_1),
+ PINMUX_DATA(IRQ14_82_MARK, PORT82_FN0, MSEL1CR_14_0),
+ PINMUX_DATA(IRQ14_146_MARK, PORT146_FN0, MSEL1CR_14_1),
+ PINMUX_DATA(IRQ15_83_MARK, PORT83_FN0, MSEL1CR_15_0),
+ PINMUX_DATA(IRQ15_147_MARK, PORT147_FN0, MSEL1CR_15_1),
+ PINMUX_DATA(IRQ16_84_MARK, PORT84_FN0, MSEL1CR_16_0),
+ PINMUX_DATA(IRQ16_170_MARK, PORT170_FN0, MSEL1CR_16_1),
+ PINMUX_DATA(IRQ17_MARK, PORT85_FN0),
+ PINMUX_DATA(IRQ18_MARK, PORT86_FN0),
+ PINMUX_DATA(IRQ19_MARK, PORT87_FN0),
+ PINMUX_DATA(IRQ20_MARK, PORT92_FN0),
+ PINMUX_DATA(IRQ21_MARK, PORT93_FN0),
+ PINMUX_DATA(IRQ22_MARK, PORT94_FN0),
+ PINMUX_DATA(IRQ23_MARK, PORT95_FN0),
+ PINMUX_DATA(IRQ24_MARK, PORT112_FN0),
+ PINMUX_DATA(IRQ25_MARK, PORT119_FN0),
+ PINMUX_DATA(IRQ26_121_MARK, PORT121_FN0, MSEL1CR_26_1),
+ PINMUX_DATA(IRQ26_172_MARK, PORT172_FN0, MSEL1CR_26_0),
+ PINMUX_DATA(IRQ27_122_MARK, PORT122_FN0, MSEL1CR_27_1),
+ PINMUX_DATA(IRQ27_180_MARK, PORT180_FN0, MSEL1CR_27_0),
+ PINMUX_DATA(IRQ28_123_MARK, PORT123_FN0, MSEL1CR_28_1),
+ PINMUX_DATA(IRQ28_181_MARK, PORT181_FN0, MSEL1CR_28_0),
+ PINMUX_DATA(IRQ29_129_MARK, PORT129_FN0, MSEL1CR_29_1),
+ PINMUX_DATA(IRQ29_182_MARK, PORT182_FN0, MSEL1CR_29_0),
+ PINMUX_DATA(IRQ30_130_MARK, PORT130_FN0, MSEL1CR_30_1),
+ PINMUX_DATA(IRQ30_183_MARK, PORT183_FN0, MSEL1CR_30_0),
+ PINMUX_DATA(IRQ31_138_MARK, PORT138_FN0, MSEL1CR_31_1),
+ PINMUX_DATA(IRQ31_184_MARK, PORT184_FN0, MSEL1CR_31_0),
+
+ /* Function 1 */
+ PINMUX_DATA(BBIF2_TSCK1_MARK, PORT0_FN1),
+ PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT1_FN1),
+ PINMUX_DATA(BBIF2_TXD1_MARK, PORT2_FN1),
+ PINMUX_DATA(BBIF2_RXD_MARK, PORT3_FN1),
+ PINMUX_DATA(FSIACK_MARK, PORT4_FN1),
+ PINMUX_DATA(FSIAILR_MARK, PORT5_FN1),
+ PINMUX_DATA(FSIAIBT_MARK, PORT6_FN1),
+ PINMUX_DATA(FSIAISLD_MARK, PORT7_FN1),
+ PINMUX_DATA(FSIAOMC_MARK, PORT8_FN1),
+ PINMUX_DATA(FSIAOLR_MARK, PORT9_FN1),
+ PINMUX_DATA(FSIAOBT_MARK, PORT10_FN1),
+ PINMUX_DATA(FSIAOSLD_MARK, PORT11_FN1),
+ PINMUX_DATA(FMSOCK_MARK, PORT12_FN1),
+ PINMUX_DATA(FMSOOLR_MARK, PORT13_FN1),
+ PINMUX_DATA(FMSOOBT_MARK, PORT14_FN1),
+ PINMUX_DATA(FMSOSLD_MARK, PORT15_FN1),
+ PINMUX_DATA(FMSOILR_MARK, PORT16_FN1),
+ PINMUX_DATA(FMSOIBT_MARK, PORT17_FN1),
+ PINMUX_DATA(FMSISLD_MARK, PORT18_FN1),
+ PINMUX_DATA(A0_MARK, PORT19_FN1),
+ PINMUX_DATA(A1_MARK, PORT20_FN1),
+ PINMUX_DATA(A2_MARK, PORT21_FN1),
+ PINMUX_DATA(A3_MARK, PORT22_FN1),
+ PINMUX_DATA(A4_FOE_MARK, PORT23_FN1),
+ PINMUX_DATA(A5_FCDE_MARK, PORT24_FN1),
+ PINMUX_DATA(A6_MARK, PORT25_FN1),
+ PINMUX_DATA(A7_MARK, PORT26_FN1),
+ PINMUX_DATA(A8_MARK, PORT27_FN1),
+ PINMUX_DATA(A9_MARK, PORT28_FN1),
+ PINMUX_DATA(A10_MARK, PORT29_FN1),
+ PINMUX_DATA(A11_MARK, PORT30_FN1),
+ PINMUX_DATA(A12_MARK, PORT31_FN1),
+ PINMUX_DATA(A13_MARK, PORT32_FN1),
+ PINMUX_DATA(A14_MARK, PORT33_FN1),
+ PINMUX_DATA(A15_MARK, PORT34_FN1),
+ PINMUX_DATA(A16_MARK, PORT35_FN1),
+ PINMUX_DATA(A17_MARK, PORT36_FN1),
+ PINMUX_DATA(A18_MARK, PORT37_FN1),
+ PINMUX_DATA(A19_MARK, PORT38_FN1),
+ PINMUX_DATA(A20_MARK, PORT39_FN1),
+ PINMUX_DATA(A21_MARK, PORT40_FN1),
+ PINMUX_DATA(A22_MARK, PORT41_FN1),
+ PINMUX_DATA(A23_MARK, PORT42_FN1),
+ PINMUX_DATA(A24_MARK, PORT43_FN1),
+ PINMUX_DATA(A25_MARK, PORT44_FN1),
+ PINMUX_DATA(A26_MARK, PORT45_FN1),
+ PINMUX_DATA(D0_NAF0_MARK, PORT46_FN1),
+ PINMUX_DATA(D1_NAF1_MARK, PORT47_FN1),
+ PINMUX_DATA(D2_NAF2_MARK, PORT48_FN1),
+ PINMUX_DATA(D3_NAF3_MARK, PORT49_FN1),
+ PINMUX_DATA(D4_NAF4_MARK, PORT50_FN1),
+ PINMUX_DATA(D5_NAF5_MARK, PORT51_FN1),
+ PINMUX_DATA(D6_NAF6_MARK, PORT52_FN1),
+ PINMUX_DATA(D7_NAF7_MARK, PORT53_FN1),
+ PINMUX_DATA(D8_NAF8_MARK, PORT54_FN1),
+ PINMUX_DATA(D9_NAF9_MARK, PORT55_FN1),
+ PINMUX_DATA(D10_NAF10_MARK, PORT56_FN1),
+ PINMUX_DATA(D11_NAF11_MARK, PORT57_FN1),
+ PINMUX_DATA(D12_NAF12_MARK, PORT58_FN1),
+ PINMUX_DATA(D13_NAF13_MARK, PORT59_FN1),
+ PINMUX_DATA(D14_NAF14_MARK, PORT60_FN1),
+ PINMUX_DATA(D15_NAF15_MARK, PORT61_FN1),
+ PINMUX_DATA(CS0_MARK, PORT62_FN1),
+ PINMUX_DATA(CS2_MARK, PORT63_FN1),
+ PINMUX_DATA(CS4_MARK, PORT64_FN1),
+ PINMUX_DATA(CS5A_MARK, PORT65_FN1),
+ PINMUX_DATA(CS5B_MARK, PORT66_FN1),
+ PINMUX_DATA(CS6A_MARK, PORT67_FN1),
+ PINMUX_DATA(FCE0_MARK, PORT68_FN1),
+ PINMUX_DATA(RD_FSC_MARK, PORT69_FN1),
+ PINMUX_DATA(WE0_FWE_MARK, PORT70_FN1),
+ PINMUX_DATA(WE1_MARK, PORT71_FN1),
+ PINMUX_DATA(CKO_MARK, PORT72_FN1),
+ PINMUX_DATA(FRB_MARK, PORT73_FN1),
+ PINMUX_DATA(WAIT_MARK, PORT74_FN1),
+ PINMUX_DATA(RDWR_MARK, PORT75_FN1),
+ PINMUX_DATA(MEMC_AD0_MARK, PORT76_FN1),
+ PINMUX_DATA(MEMC_AD1_MARK, PORT77_FN1),
+ PINMUX_DATA(MEMC_AD2_MARK, PORT78_FN1),
+ PINMUX_DATA(MEMC_AD3_MARK, PORT79_FN1),
+ PINMUX_DATA(MEMC_AD4_MARK, PORT80_FN1),
+ PINMUX_DATA(MEMC_AD5_MARK, PORT81_FN1),
+ PINMUX_DATA(MEMC_AD6_MARK, PORT82_FN1),
+ PINMUX_DATA(MEMC_AD7_MARK, PORT83_FN1),
+ PINMUX_DATA(MEMC_AD8_MARK, PORT84_FN1),
+ PINMUX_DATA(MEMC_AD9_MARK, PORT85_FN1),
+ PINMUX_DATA(MEMC_AD10_MARK, PORT86_FN1),
+ PINMUX_DATA(MEMC_AD11_MARK, PORT87_FN1),
+ PINMUX_DATA(MEMC_AD12_MARK, PORT88_FN1),
+ PINMUX_DATA(MEMC_AD13_MARK, PORT89_FN1),
+ PINMUX_DATA(MEMC_AD14_MARK, PORT90_FN1),
+ PINMUX_DATA(MEMC_AD15_MARK, PORT91_FN1),
+ PINMUX_DATA(MEMC_CS0_MARK, PORT92_FN1),
+ PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK, PORT93_FN1),
+ PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK, PORT94_FN1),
+ PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK, PORT95_FN1),
+ PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK, PORT96_FN1),
+ PINMUX_DATA(MEMC_NOE_MARK, PORT97_FN1),
+ PINMUX_DATA(MEMC_NWE_MARK, PORT98_FN1),
+ PINMUX_DATA(MEMC_INT_MARK, PORT99_FN1),
+ PINMUX_DATA(VIO_VD_MARK, PORT100_FN1),
+ PINMUX_DATA(VIO_HD_MARK, PORT101_FN1),
+ PINMUX_DATA(VIO_D0_MARK, PORT102_FN1),
+ PINMUX_DATA(VIO_D1_MARK, PORT103_FN1),
+ PINMUX_DATA(VIO_D2_MARK, PORT104_FN1),
+ PINMUX_DATA(VIO_D3_MARK, PORT105_FN1),
+ PINMUX_DATA(VIO_D4_MARK, PORT106_FN1),
+ PINMUX_DATA(VIO_D5_MARK, PORT107_FN1),
+ PINMUX_DATA(VIO_D6_MARK, PORT108_FN1),
+ PINMUX_DATA(VIO_D7_MARK, PORT109_FN1),
+ PINMUX_DATA(VIO_D8_MARK, PORT110_FN1),
+ PINMUX_DATA(VIO_D9_MARK, PORT111_FN1),
+ PINMUX_DATA(VIO_D10_MARK, PORT112_FN1),
+ PINMUX_DATA(VIO_D11_MARK, PORT113_FN1),
+ PINMUX_DATA(VIO_D12_MARK, PORT114_FN1),
+ PINMUX_DATA(VIO_D13_MARK, PORT115_FN1),
+ PINMUX_DATA(VIO_D14_MARK, PORT116_FN1),
+ PINMUX_DATA(VIO_D15_MARK, PORT117_FN1),
+ PINMUX_DATA(VIO_CLK_MARK, PORT118_FN1),
+ PINMUX_DATA(VIO_FIELD_MARK, PORT119_FN1),
+ PINMUX_DATA(VIO_CKO_MARK, PORT120_FN1),
+ PINMUX_DATA(LCDD0_MARK, PORT121_FN1),
+ PINMUX_DATA(LCDD1_MARK, PORT122_FN1),
+ PINMUX_DATA(LCDD2_MARK, PORT123_FN1),
+ PINMUX_DATA(LCDD3_MARK, PORT124_FN1),
+ PINMUX_DATA(LCDD4_MARK, PORT125_FN1),
+ PINMUX_DATA(LCDD5_MARK, PORT126_FN1),
+ PINMUX_DATA(LCDD6_MARK, PORT127_FN1),
+ PINMUX_DATA(LCDD7_MARK, PORT128_FN1),
+ PINMUX_DATA(LCDD8_MARK, PORT129_FN1),
+ PINMUX_DATA(LCDD9_MARK, PORT130_FN1),
+ PINMUX_DATA(LCDD10_MARK, PORT131_FN1),
+ PINMUX_DATA(LCDD11_MARK, PORT132_FN1),
+ PINMUX_DATA(LCDD12_MARK, PORT133_FN1),
+ PINMUX_DATA(LCDD13_MARK, PORT134_FN1),
+ PINMUX_DATA(LCDD14_MARK, PORT135_FN1),
+ PINMUX_DATA(LCDD15_MARK, PORT136_FN1),
+ PINMUX_DATA(LCDD16_MARK, PORT137_FN1),
+ PINMUX_DATA(LCDD17_MARK, PORT138_FN1),
+ PINMUX_DATA(LCDD18_MARK, PORT139_FN1),
+ PINMUX_DATA(LCDD19_MARK, PORT140_FN1),
+ PINMUX_DATA(LCDD20_MARK, PORT141_FN1),
+ PINMUX_DATA(LCDD21_MARK, PORT142_FN1),
+ PINMUX_DATA(LCDD22_MARK, PORT143_FN1),
+ PINMUX_DATA(LCDD23_MARK, PORT144_FN1),
+ PINMUX_DATA(LCDHSYN_MARK, PORT145_FN1),
+ PINMUX_DATA(LCDVSYN_MARK, PORT146_FN1),
+ PINMUX_DATA(LCDDCK_MARK, PORT147_FN1),
+ PINMUX_DATA(LCDRD_MARK, PORT148_FN1),
+ PINMUX_DATA(LCDDISP_MARK, PORT149_FN1),
+ PINMUX_DATA(LCDLCLK_MARK, PORT150_FN1),
+ PINMUX_DATA(LCDDON_MARK, PORT151_FN1),
+ PINMUX_DATA(SCIFA0_TXD_MARK, PORT152_FN1),
+ PINMUX_DATA(SCIFA0_RXD_MARK, PORT153_FN1),
+ PINMUX_DATA(SCIFA1_TXD_MARK, PORT154_FN1),
+ PINMUX_DATA(SCIFA1_RXD_MARK, PORT155_FN1),
+ PINMUX_DATA(TS_SPSYNC1_MARK, PORT156_FN1),
+ PINMUX_DATA(TS_SDAT1_MARK, PORT157_FN1),
+ PINMUX_DATA(TS_SDEN1_MARK, PORT158_FN1),
+ PINMUX_DATA(TS_SCK1_MARK, PORT159_FN1),
+ PINMUX_DATA(TPU0TO0_MARK, PORT160_FN1),
+ PINMUX_DATA(TPU0TO1_MARK, PORT161_FN1),
+ PINMUX_DATA(SCIFB_SCK_MARK, PORT162_FN1),
+ PINMUX_DATA(SCIFB_RTS_MARK, PORT163_FN1),
+ PINMUX_DATA(SCIFB_CTS_MARK, PORT164_FN1),
+ PINMUX_DATA(SCIFB_TXD_MARK, PORT165_FN1),
+ PINMUX_DATA(SCIFB_RXD_MARK, PORT166_FN1),
+ PINMUX_DATA(VBUS0_0_MARK, PORT167_FN1),
+ PINMUX_DATA(VBUS0_1_MARK, PORT168_FN1),
+ PINMUX_DATA(HDMI_HPD_MARK, PORT169_FN1),
+ PINMUX_DATA(HDMI_CEC_MARK, PORT170_FN1),
+ PINMUX_DATA(SDHICLK0_MARK, PORT171_FN1),
+ PINMUX_DATA(SDHICD0_MARK, PORT172_FN1),
+ PINMUX_DATA(SDHID0_0_MARK, PORT173_FN1),
+ PINMUX_DATA(SDHID0_1_MARK, PORT174_FN1),
+ PINMUX_DATA(SDHID0_2_MARK, PORT175_FN1),
+ PINMUX_DATA(SDHID0_3_MARK, PORT176_FN1),
+ PINMUX_DATA(SDHICMD0_MARK, PORT177_FN1),
+ PINMUX_DATA(SDHIWP0_MARK, PORT178_FN1),
+ PINMUX_DATA(SDHICLK1_MARK, PORT179_FN1),
+ PINMUX_DATA(SDHID1_0_MARK, PORT180_FN1),
+ PINMUX_DATA(SDHID1_1_MARK, PORT181_FN1),
+ PINMUX_DATA(SDHID1_2_MARK, PORT182_FN1),
+ PINMUX_DATA(SDHID1_3_MARK, PORT183_FN1),
+ PINMUX_DATA(SDHICMD1_MARK, PORT184_FN1),
+ PINMUX_DATA(SDHICLK2_MARK, PORT185_FN1),
+ PINMUX_DATA(SDHID2_0_MARK, PORT186_FN1),
+ PINMUX_DATA(SDHID2_1_MARK, PORT187_FN1),
+ PINMUX_DATA(SDHID2_2_MARK, PORT188_FN1),
+ PINMUX_DATA(SDHID2_3_MARK, PORT189_FN1),
+ PINMUX_DATA(SDHICMD2_MARK, PORT190_FN1),
+
+ /* Function 2 */
+ PINMUX_DATA(FSIBCK_MARK, PORT4_FN2),
+ PINMUX_DATA(SCIFA4_RXD_MARK, PORT5_FN2),
+ PINMUX_DATA(SCIFA4_TXD_MARK, PORT6_FN2),
+ PINMUX_DATA(SCIFA5_RXD_MARK, PORT8_FN2),
+ PINMUX_DATA(FSIASPDIF_11_MARK, PORT11_FN2),
+ PINMUX_DATA(SCIFA5_TXD_MARK, PORT12_FN2),
+ PINMUX_DATA(FMSIOLR_MARK, PORT13_FN2),
+ PINMUX_DATA(FMSIOBT_MARK, PORT14_FN2),
+ PINMUX_DATA(FSIASPDIF_15_MARK, PORT15_FN2),
+ PINMUX_DATA(FMSIILR_MARK, PORT16_FN2),
+ PINMUX_DATA(FMSIIBT_MARK, PORT17_FN2),
+ PINMUX_DATA(BS_MARK, PORT19_FN2),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT36_FN2),
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PORT37_FN2),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PORT38_FN2),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PORT39_FN2),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT40_FN2),
+ PINMUX_DATA(MSIOF0_MCK0_MARK, PORT41_FN2),
+ PINMUX_DATA(MSIOF0_MCK1_MARK, PORT42_FN2),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PORT43_FN2),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PORT44_FN2),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PORT45_FN2),
+ PINMUX_DATA(FMSICK_MARK, PORT65_FN2),
+ PINMUX_DATA(FCE1_MARK, PORT66_FN2),
+ PINMUX_DATA(BBIF1_RXD_MARK, PORT76_FN2),
+ PINMUX_DATA(BBIF1_TSYNC_MARK, PORT77_FN2),
+ PINMUX_DATA(BBIF1_TSCK_MARK, PORT78_FN2),
+ PINMUX_DATA(BBIF1_TXD_MARK, PORT79_FN2),
+ PINMUX_DATA(BBIF1_RSCK_MARK, PORT80_FN2),
+ PINMUX_DATA(BBIF1_RSYNC_MARK, PORT81_FN2),
+ PINMUX_DATA(BBIF1_FLOW_MARK, PORT82_FN2),
+ PINMUX_DATA(BB_RX_FLOW_N_MARK, PORT83_FN2),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PORT84_FN2),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT85_FN2),
+ PINMUX_DATA(MSIOF1_MCK0_MARK, PORT86_FN2),
+ PINMUX_DATA(MSIOF1_MCK1_MARK, PORT87_FN2),
+ PINMUX_DATA(MSIOF1_TSCK_88_MARK, PORT88_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_TSYNC_89_MARK, PORT89_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_TXD_90_MARK, PORT90_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_RXD_91_MARK, PORT91_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_SS1_92_MARK, PORT92_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_SS2_93_MARK, PORT93_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(SCIFA2_CTS1_MARK, PORT94_FN2),
+ PINMUX_DATA(SCIFA2_RTS1_MARK, PORT95_FN2),
+ PINMUX_DATA(SCIFA2_TXD1_MARK, PORT96_FN2),
+ PINMUX_DATA(SCIFA2_RXD1_MARK, PORT97_FN2),
+ PINMUX_DATA(SCIFA2_SCK1_MARK, PORT98_FN2),
+ PINMUX_DATA(I2C_SCL2_MARK, PORT110_FN2),
+ PINMUX_DATA(I2C_SDA2_MARK, PORT111_FN2),
+ PINMUX_DATA(I2C_SCL3_MARK, PORT114_FN2, MSEL4CR_16_1),
+ PINMUX_DATA(I2C_SDA3_MARK, PORT115_FN2, MSEL4CR_16_1),
+ PINMUX_DATA(I2C_SCL4_MARK, PORT116_FN2, MSEL4CR_17_1),
+ PINMUX_DATA(I2C_SDA4_MARK, PORT117_FN2, MSEL4CR_17_1),
+ PINMUX_DATA(MSIOF2_RSCK_MARK, PORT134_FN2),
+ PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT135_FN2),
+ PINMUX_DATA(MSIOF2_MCK0_MARK, PORT136_FN2),
+ PINMUX_DATA(MSIOF2_MCK1_MARK, PORT137_FN2),
+ PINMUX_DATA(MSIOF2_SS1_MARK, PORT138_FN2),
+ PINMUX_DATA(MSIOF2_SS2_MARK, PORT139_FN2),
+ PINMUX_DATA(SCIFA3_CTS_140_MARK, PORT140_FN2, MSEL3CR_9_1),
+ PINMUX_DATA(SCIFA3_RTS_141_MARK, PORT141_FN2),
+ PINMUX_DATA(SCIFA3_SCK_MARK, PORT142_FN2),
+ PINMUX_DATA(SCIFA3_TXD_MARK, PORT143_FN2),
+ PINMUX_DATA(SCIFA3_RXD_MARK, PORT144_FN2),
+ PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT148_FN2),
+ PINMUX_DATA(MSIOF2_TSCK_MARK, PORT149_FN2),
+ PINMUX_DATA(MSIOF2_RXD_MARK, PORT150_FN2),
+ PINMUX_DATA(MSIOF2_TXD_MARK, PORT151_FN2),
+ PINMUX_DATA(SCIFA0_SCK_MARK, PORT156_FN2),
+ PINMUX_DATA(SCIFA0_RTS_MARK, PORT157_FN2),
+ PINMUX_DATA(SCIFA0_CTS_MARK, PORT158_FN2),
+ PINMUX_DATA(SCIFA1_SCK_MARK, PORT159_FN2),
+ PINMUX_DATA(SCIFA1_RTS_MARK, PORT160_FN2),
+ PINMUX_DATA(SCIFA1_CTS_MARK, PORT161_FN2),
+
+ /* Function 3 */
+ PINMUX_DATA(VIO_CKO1_MARK, PORT16_FN3),
+ PINMUX_DATA(VIO_CKO2_MARK, PORT17_FN3),
+ PINMUX_DATA(IDIN_1_18_MARK, PORT18_FN3, MSEL4CR_14_1),
+ PINMUX_DATA(MSIOF1_TSCK_39_MARK, PORT39_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(MSIOF1_TSYNC_40_MARK, PORT40_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(MSIOF1_TXD_41_MARK, PORT41_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(MSIOF1_RXD_42_MARK, PORT42_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(MSIOF1_SS1_43_MARK, PORT43_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(MSIOF1_SS2_44_MARK, PORT44_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(MMCD1_0_MARK, PORT54_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_1_MARK, PORT55_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_2_MARK, PORT56_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_3_MARK, PORT57_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_4_MARK, PORT58_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_5_MARK, PORT59_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_6_MARK, PORT60_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCD1_7_MARK, PORT61_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(VINT_I_MARK, PORT65_FN3),
+ PINMUX_DATA(MMCCLK1_MARK, PORT66_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMCCMD1_MARK, PORT67_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(TPU0TO2_93_MARK, PORT93_FN3),
+ PINMUX_DATA(TPU0TO2_99_MARK, PORT99_FN3),
+ PINMUX_DATA(TPU0TO3_MARK, PORT112_FN3),
+ PINMUX_DATA(IDIN_0_MARK, PORT113_FN3),
+ PINMUX_DATA(EXTLP_0_MARK, PORT114_FN3),
+ PINMUX_DATA(OVCN2_0_MARK, PORT115_FN3),
+ PINMUX_DATA(PWEN_0_MARK, PORT116_FN3),
+ PINMUX_DATA(OVCN_0_MARK, PORT117_FN3),
+ PINMUX_DATA(KEYOUT7_MARK, PORT121_FN3),
+ PINMUX_DATA(KEYOUT6_MARK, PORT122_FN3),
+ PINMUX_DATA(KEYOUT5_MARK, PORT123_FN3),
+ PINMUX_DATA(KEYOUT4_MARK, PORT124_FN3),
+ PINMUX_DATA(KEYOUT3_MARK, PORT125_FN3),
+ PINMUX_DATA(KEYOUT2_MARK, PORT126_FN3),
+ PINMUX_DATA(KEYOUT1_MARK, PORT127_FN3),
+ PINMUX_DATA(KEYOUT0_MARK, PORT128_FN3),
+ PINMUX_DATA(KEYIN7_MARK, PORT129_FN3),
+ PINMUX_DATA(KEYIN6_MARK, PORT130_FN3),
+ PINMUX_DATA(KEYIN5_MARK, PORT131_FN3),
+ PINMUX_DATA(KEYIN4_MARK, PORT132_FN3),
+ PINMUX_DATA(KEYIN3_133_MARK, PORT133_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(KEYIN2_134_MARK, PORT134_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(KEYIN1_135_MARK, PORT135_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(KEYIN0_136_MARK, PORT136_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(TS_SPSYNC2_MARK, PORT137_FN3),
+ PINMUX_DATA(IROUT_139_MARK, PORT139_FN3),
+ PINMUX_DATA(IRDA_OUT_MARK, PORT140_FN3),
+ PINMUX_DATA(IRDA_IN_MARK, PORT141_FN3),
+ PINMUX_DATA(IRDA_FIRSEL_MARK, PORT142_FN3),
+ PINMUX_DATA(TS_SDAT2_MARK, PORT145_FN3),
+ PINMUX_DATA(TS_SDEN2_MARK, PORT146_FN3),
+ PINMUX_DATA(TS_SCK2_MARK, PORT147_FN3),
+
+ /* Function 4 */
+ PINMUX_DATA(SCIFA3_CTS_43_MARK, PORT43_FN4, MSEL3CR_9_0),
+ PINMUX_DATA(SCIFA3_RTS_44_MARK, PORT44_FN4),
+ PINMUX_DATA(GP_RX_FLAG_MARK, PORT76_FN4),
+ PINMUX_DATA(GP_RX_DATA_MARK, PORT77_FN4),
+ PINMUX_DATA(GP_TX_READY_MARK, PORT78_FN4),
+ PINMUX_DATA(GP_RX_WAKE_MARK, PORT79_FN4),
+ PINMUX_DATA(MP_TX_FLAG_MARK, PORT80_FN4),
+ PINMUX_DATA(MP_TX_DATA_MARK, PORT81_FN4),
+ PINMUX_DATA(MP_RX_READY_MARK, PORT82_FN4),
+ PINMUX_DATA(MP_TX_WAKE_MARK, PORT83_FN4),
+ PINMUX_DATA(MMCD0_0_MARK, PORT84_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_1_MARK, PORT85_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_2_MARK, PORT86_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_3_MARK, PORT87_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_4_MARK, PORT88_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_5_MARK, PORT89_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_6_MARK, PORT90_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCD0_7_MARK, PORT91_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMCCMD0_MARK, PORT92_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(SIM_RST_MARK, PORT94_FN4),
+ PINMUX_DATA(SIM_CLK_MARK, PORT95_FN4),
+ PINMUX_DATA(SIM_D_MARK, PORT98_FN4),
+ PINMUX_DATA(MMCCLK0_MARK, PORT99_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(IDIN_1_113_MARK, PORT113_FN4, MSEL4CR_14_0),
+ PINMUX_DATA(OVCN_1_114_MARK, PORT114_FN4, MSEL4CR_14_0),
+ PINMUX_DATA(PWEN_1_115_MARK, PORT115_FN4),
+ PINMUX_DATA(EXTLP_1_MARK, PORT116_FN4),
+ PINMUX_DATA(OVCN2_1_MARK, PORT117_FN4),
+ PINMUX_DATA(KEYIN0_121_MARK, PORT121_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(KEYIN1_122_MARK, PORT122_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(KEYIN2_123_MARK, PORT123_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(KEYIN3_124_MARK, PORT124_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(PWEN_1_138_MARK, PORT138_FN4),
+ PINMUX_DATA(IROUT_140_MARK, PORT140_FN4),
+ PINMUX_DATA(LCDCS_MARK, PORT145_FN4),
+ PINMUX_DATA(LCDWR_MARK, PORT147_FN4),
+ PINMUX_DATA(LCDRS_MARK, PORT149_FN4),
+ PINMUX_DATA(OVCN_1_162_MARK, PORT162_FN4, MSEL4CR_14_1),
+
+ /* Function 5 */
+ PINMUX_DATA(GPI0_MARK, PORT41_FN5),
+ PINMUX_DATA(GPI1_MARK, PORT42_FN5),
+ PINMUX_DATA(GPO0_MARK, PORT43_FN5),
+ PINMUX_DATA(GPO1_MARK, PORT44_FN5),
+ PINMUX_DATA(I2C_SCL3S_MARK, PORT137_FN5, MSEL4CR_16_0),
+ PINMUX_DATA(I2C_SDA3S_MARK, PORT145_FN5, MSEL4CR_16_0),
+ PINMUX_DATA(I2C_SCL4S_MARK, PORT146_FN5, MSEL4CR_17_0),
+ PINMUX_DATA(I2C_SDA4S_MARK, PORT147_FN5, MSEL4CR_17_0),
+
+ /* Function select */
+ PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0),
+ PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1),
+
+ PINMUX_DATA(TS0_1SELECT_MARK, MSEL3CR_21_0, MSEL3CR_20_0),
+ PINMUX_DATA(TS0_2SELECT_MARK, MSEL3CR_21_0, MSEL3CR_20_1),
+ PINMUX_DATA(TS1_1SELECT_MARK, MSEL3CR_27_0, MSEL3CR_26_0),
+ PINMUX_DATA(TS1_2SELECT_MARK, MSEL3CR_27_0, MSEL3CR_26_1),
+
+ PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0),
+ PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1),
+
+ PINMUX_DATA(MFIv6_MARK, MSEL4CR_6_0),
+ PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+ /* PORT */
+ GPIO_PORT_ALL(),
+
+ /* IRQ */
+ GPIO_FN(IRQ0_6), GPIO_FN(IRQ0_162), GPIO_FN(IRQ1),
+ GPIO_FN(IRQ2_4), GPIO_FN(IRQ2_5), GPIO_FN(IRQ3_8),
+ GPIO_FN(IRQ3_16), GPIO_FN(IRQ4_17), GPIO_FN(IRQ4_163),
+ GPIO_FN(IRQ5), GPIO_FN(IRQ6_39), GPIO_FN(IRQ6_164),
+ GPIO_FN(IRQ7_40), GPIO_FN(IRQ7_167), GPIO_FN(IRQ8_41),
+ GPIO_FN(IRQ8_168), GPIO_FN(IRQ9_42), GPIO_FN(IRQ9_169),
+ GPIO_FN(IRQ10), GPIO_FN(IRQ11), GPIO_FN(IRQ12_80),
+ GPIO_FN(IRQ12_137), GPIO_FN(IRQ13_81), GPIO_FN(IRQ13_145),
+ GPIO_FN(IRQ14_82), GPIO_FN(IRQ14_146), GPIO_FN(IRQ15_83),
+ GPIO_FN(IRQ15_147), GPIO_FN(IRQ16_84), GPIO_FN(IRQ16_170),
+ GPIO_FN(IRQ17), GPIO_FN(IRQ18), GPIO_FN(IRQ19),
+ GPIO_FN(IRQ20), GPIO_FN(IRQ21), GPIO_FN(IRQ22),
+ GPIO_FN(IRQ23), GPIO_FN(IRQ24), GPIO_FN(IRQ25),
+ GPIO_FN(IRQ26_121), GPIO_FN(IRQ26_172), GPIO_FN(IRQ27_122),
+ GPIO_FN(IRQ27_180), GPIO_FN(IRQ28_123), GPIO_FN(IRQ28_181),
+ GPIO_FN(IRQ29_129), GPIO_FN(IRQ29_182), GPIO_FN(IRQ30_130),
+ GPIO_FN(IRQ30_183), GPIO_FN(IRQ31_138), GPIO_FN(IRQ31_184),
+
+ /* MSIOF0 */
+ GPIO_FN(MSIOF0_TSYNC), GPIO_FN(MSIOF0_TSCK), GPIO_FN(MSIOF0_RXD),
+ GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_MCK0),
+ GPIO_FN(MSIOF0_MCK1), GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2),
+ GPIO_FN(MSIOF0_TXD),
+
+ /* MSIOF1 */
+ GPIO_FN(MSIOF1_TSCK_39), GPIO_FN(MSIOF1_TSCK_88),
+ GPIO_FN(MSIOF1_TSYNC_40), GPIO_FN(MSIOF1_TSYNC_89),
+ GPIO_FN(MSIOF1_TXD_41), GPIO_FN(MSIOF1_TXD_90),
+ GPIO_FN(MSIOF1_RXD_42), GPIO_FN(MSIOF1_RXD_91),
+ GPIO_FN(MSIOF1_SS1_43), GPIO_FN(MSIOF1_SS1_92),
+ GPIO_FN(MSIOF1_SS2_44), GPIO_FN(MSIOF1_SS2_93),
+ GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC),
+ GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+
+ /* MSIOF2 */
+ GPIO_FN(MSIOF2_RSCK), GPIO_FN(MSIOF2_RSYNC), GPIO_FN(MSIOF2_MCK0),
+ GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_SS1), GPIO_FN(MSIOF2_SS2),
+ GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD),
+ GPIO_FN(MSIOF2_TXD),
+
+ /* MSIOF3 */
+ GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK),
+ GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC),
+ GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N),
+
+ /* MSIOF4 */
+ GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1),
+ GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD),
+
+ /* FSI */
+ GPIO_FN(FSIACK), GPIO_FN(FSIBCK), GPIO_FN(FSIAILR),
+ GPIO_FN(FSIAIBT), GPIO_FN(FSIAISLD), GPIO_FN(FSIAOMC),
+ GPIO_FN(FSIAOLR), GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD),
+ GPIO_FN(FSIASPDIF_11), GPIO_FN(FSIASPDIF_15),
+
+ /* FMSI */
+ GPIO_FN(FMSOCK), GPIO_FN(FMSOOLR), GPIO_FN(FMSIOLR),
+ GPIO_FN(FMSOOBT), GPIO_FN(FMSIOBT), GPIO_FN(FMSOSLD),
+ GPIO_FN(FMSOILR), GPIO_FN(FMSIILR), GPIO_FN(FMSOIBT),
+ GPIO_FN(FMSIIBT), GPIO_FN(FMSISLD), GPIO_FN(FMSICK),
+
+ /* SCIFA0 */
+ GPIO_FN(SCIFA0_TXD), GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_SCK),
+ GPIO_FN(SCIFA0_RTS), GPIO_FN(SCIFA0_CTS),
+
+ /* SCIFA1 */
+ GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_SCK),
+ GPIO_FN(SCIFA1_RTS), GPIO_FN(SCIFA1_CTS),
+
+ /* SCIFA2 */
+ GPIO_FN(SCIFA2_CTS1), GPIO_FN(SCIFA2_RTS1), GPIO_FN(SCIFA2_TXD1),
+ GPIO_FN(SCIFA2_RXD1), GPIO_FN(SCIFA2_SCK1),
+
+ /* SCIFA3 */
+ GPIO_FN(SCIFA3_CTS_43), GPIO_FN(SCIFA3_CTS_140),
+ GPIO_FN(SCIFA3_RTS_44), GPIO_FN(SCIFA3_RTS_141),
+ GPIO_FN(SCIFA3_SCK), GPIO_FN(SCIFA3_TXD),
+ GPIO_FN(SCIFA3_RXD),
+
+ /* SCIFA4 */
+ GPIO_FN(SCIFA4_RXD), GPIO_FN(SCIFA4_TXD),
+
+ /* SCIFA5 */
+ GPIO_FN(SCIFA5_RXD), GPIO_FN(SCIFA5_TXD),
+
+ /* SCIFB */
+ GPIO_FN(SCIFB_SCK), GPIO_FN(SCIFB_RTS), GPIO_FN(SCIFB_CTS),
+ GPIO_FN(SCIFB_TXD), GPIO_FN(SCIFB_RXD),
+
+ /* CEU */
+ GPIO_FN(VIO_HD), GPIO_FN(VIO_CKO1), GPIO_FN(VIO_CKO2),
+ GPIO_FN(VIO_VD), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
+ GPIO_FN(VIO_CKO), GPIO_FN(VIO_D0), GPIO_FN(VIO_D1),
+ GPIO_FN(VIO_D2), GPIO_FN(VIO_D3), GPIO_FN(VIO_D4),
+ GPIO_FN(VIO_D5), GPIO_FN(VIO_D6), GPIO_FN(VIO_D7),
+ GPIO_FN(VIO_D8), GPIO_FN(VIO_D9), GPIO_FN(VIO_D10),
+ GPIO_FN(VIO_D11), GPIO_FN(VIO_D12), GPIO_FN(VIO_D13),
+ GPIO_FN(VIO_D14), GPIO_FN(VIO_D15),
+
+ /* USB0 */
+ GPIO_FN(IDIN_0), GPIO_FN(EXTLP_0), GPIO_FN(OVCN2_0),
+ GPIO_FN(PWEN_0), GPIO_FN(OVCN_0), GPIO_FN(VBUS0_0),
+
+ /* USB1 */
+ GPIO_FN(IDIN_1_18), GPIO_FN(IDIN_1_113),
+ GPIO_FN(OVCN_1_114), GPIO_FN(OVCN_1_162),
+ GPIO_FN(PWEN_1_115), GPIO_FN(PWEN_1_138),
+ GPIO_FN(EXTLP_1), GPIO_FN(OVCN2_1),
+ GPIO_FN(VBUS0_1),
+
+ /* GPIO */
+ GPIO_FN(GPI0), GPIO_FN(GPI1), GPIO_FN(GPO0), GPIO_FN(GPO1),
+
+ /* BSC */
+ GPIO_FN(BS), GPIO_FN(WE1), GPIO_FN(CKO),
+ GPIO_FN(WAIT), GPIO_FN(RDWR),
+
+ GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2),
+ GPIO_FN(A3), GPIO_FN(A6), GPIO_FN(A7),
+ GPIO_FN(A8), GPIO_FN(A9), GPIO_FN(A10),
+ GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13),
+ GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16),
+ GPIO_FN(A17), GPIO_FN(A18), GPIO_FN(A19),
+ GPIO_FN(A20), GPIO_FN(A21), GPIO_FN(A22),
+ GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25),
+ GPIO_FN(A26),
+
+ GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4),
+ GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(CS6A),
+
+ /* BSC/FLCTL */
+ GPIO_FN(RD_FSC), GPIO_FN(WE0_FWE), GPIO_FN(A4_FOE),
+ GPIO_FN(A5_FCDE), GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1),
+ GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), GPIO_FN(D4_NAF4),
+ GPIO_FN(D5_NAF5), GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7),
+ GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), GPIO_FN(D10_NAF10),
+ GPIO_FN(D11_NAF11), GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13),
+ GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15),
+
+ /* MMCIF(1) */
+ GPIO_FN(MMCD0_0), GPIO_FN(MMCD0_1), GPIO_FN(MMCD0_2),
+ GPIO_FN(MMCD0_3), GPIO_FN(MMCD0_4), GPIO_FN(MMCD0_5),
+ GPIO_FN(MMCD0_6), GPIO_FN(MMCD0_7), GPIO_FN(MMCCMD0),
+ GPIO_FN(MMCCLK0),
+
+ /* MMCIF(2) */
+ GPIO_FN(MMCD1_0), GPIO_FN(MMCD1_1), GPIO_FN(MMCD1_2),
+ GPIO_FN(MMCD1_3), GPIO_FN(MMCD1_4), GPIO_FN(MMCD1_5),
+ GPIO_FN(MMCD1_6), GPIO_FN(MMCD1_7), GPIO_FN(MMCCLK1),
+ GPIO_FN(MMCCMD1),
+
+ /* SPU2 */
+ GPIO_FN(VINT_I),
+
+ /* FLCTL */
+ GPIO_FN(FCE1), GPIO_FN(FCE0), GPIO_FN(FRB),
+
+ /* HSI */
+ GPIO_FN(GP_RX_FLAG), GPIO_FN(GP_RX_DATA), GPIO_FN(GP_TX_READY),
+ GPIO_FN(GP_RX_WAKE), GPIO_FN(MP_TX_FLAG), GPIO_FN(MP_TX_DATA),
+ GPIO_FN(MP_RX_READY), GPIO_FN(MP_TX_WAKE),
+
+ /* MFI */
+ GPIO_FN(MFIv6),
+ GPIO_FN(MFIv4),
+
+ GPIO_FN(MEMC_BUSCLK_MEMC_A0), GPIO_FN(MEMC_ADV_MEMC_DREQ0),
+ GPIO_FN(MEMC_WAIT_MEMC_DREQ1), GPIO_FN(MEMC_CS1_MEMC_A1),
+ GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_NOE),
+ GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_INT),
+
+ GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2),
+ GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5),
+ GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8),
+ GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11),
+ GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14),
+ GPIO_FN(MEMC_AD15),
+
+ /* SIM */
+ GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), GPIO_FN(SIM_D),
+
+ /* TPU */
+ GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO2_93),
+ GPIO_FN(TPU0TO2_99), GPIO_FN(TPU0TO3),
+
+ /* I2C2 */
+ GPIO_FN(I2C_SCL2), GPIO_FN(I2C_SDA2),
+
+ /* I2C3(1) */
+ GPIO_FN(I2C_SCL3), GPIO_FN(I2C_SDA3),
+
+ /* I2C3(2) */
+ GPIO_FN(I2C_SCL3S), GPIO_FN(I2C_SDA3S),
+
+ /* I2C4(2) */
+ GPIO_FN(I2C_SCL4), GPIO_FN(I2C_SDA4),
+
+ /* I2C4(2) */
+ GPIO_FN(I2C_SCL4S), GPIO_FN(I2C_SDA4S),
+
+ /* KEYSC */
+ GPIO_FN(KEYOUT0), GPIO_FN(KEYIN0_121), GPIO_FN(KEYIN0_136),
+ GPIO_FN(KEYOUT1), GPIO_FN(KEYIN1_122), GPIO_FN(KEYIN1_135),
+ GPIO_FN(KEYOUT2), GPIO_FN(KEYIN2_123), GPIO_FN(KEYIN2_134),
+ GPIO_FN(KEYOUT3), GPIO_FN(KEYIN3_124), GPIO_FN(KEYIN3_133),
+ GPIO_FN(KEYOUT4), GPIO_FN(KEYIN4), GPIO_FN(KEYOUT5),
+ GPIO_FN(KEYIN5), GPIO_FN(KEYOUT6), GPIO_FN(KEYIN6),
+ GPIO_FN(KEYOUT7), GPIO_FN(KEYIN7),
+
+ /* LCDC */
+ GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDVSYN),
+ GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(LCDRD),
+ GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(LCDLCLK),
+ GPIO_FN(LCDDON),
+
+ GPIO_FN(LCDD0), GPIO_FN(LCDD1), GPIO_FN(LCDD2),
+ GPIO_FN(LCDD3), GPIO_FN(LCDD4), GPIO_FN(LCDD5),
+ GPIO_FN(LCDD6), GPIO_FN(LCDD7), GPIO_FN(LCDD8),
+ GPIO_FN(LCDD9), GPIO_FN(LCDD10), GPIO_FN(LCDD11),
+ GPIO_FN(LCDD12), GPIO_FN(LCDD13), GPIO_FN(LCDD14),
+ GPIO_FN(LCDD15), GPIO_FN(LCDD16), GPIO_FN(LCDD17),
+ GPIO_FN(LCDD18), GPIO_FN(LCDD19), GPIO_FN(LCDD20),
+ GPIO_FN(LCDD21), GPIO_FN(LCDD22), GPIO_FN(LCDD23),
+
+ /* IRDA */
+ GPIO_FN(IRDA_OUT), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
+ GPIO_FN(IROUT_139), GPIO_FN(IROUT_140),
+
+ /* TSIF1 */
+ GPIO_FN(TS0_1SELECT),
+ GPIO_FN(TS0_2SELECT),
+ GPIO_FN(TS1_1SELECT),
+ GPIO_FN(TS1_2SELECT),
+
+ GPIO_FN(TS_SPSYNC1), GPIO_FN(TS_SDAT1),
+ GPIO_FN(TS_SDEN1), GPIO_FN(TS_SCK1),
+
+ /* TSIF2 */
+ GPIO_FN(TS_SPSYNC2), GPIO_FN(TS_SDAT2),
+ GPIO_FN(TS_SDEN2), GPIO_FN(TS_SCK2),
+
+ /* HDMI */
+ GPIO_FN(HDMI_HPD), GPIO_FN(HDMI_CEC),
+
+ /* SDHI0 */
+ GPIO_FN(SDHICLK0), GPIO_FN(SDHICD0), GPIO_FN(SDHICMD0),
+ GPIO_FN(SDHIWP0), GPIO_FN(SDHID0_0), GPIO_FN(SDHID0_1),
+ GPIO_FN(SDHID0_2), GPIO_FN(SDHID0_3),
+
+ /* SDHI1 */
+ GPIO_FN(SDHICLK1), GPIO_FN(SDHICMD1), GPIO_FN(SDHID1_0),
+ GPIO_FN(SDHID1_1), GPIO_FN(SDHID1_2), GPIO_FN(SDHID1_3),
+
+ /* SDHI2 */
+ GPIO_FN(SDHICLK2), GPIO_FN(SDHICMD2), GPIO_FN(SDHID2_0),
+ GPIO_FN(SDHID2_1), GPIO_FN(SDHID2_2), GPIO_FN(SDHID2_3),
+
+ /* SDENC */
+ GPIO_FN(SDENC_CPG),
+ GPIO_FN(SDENC_DV_CLKI),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
+ PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ PORTCR(0, 0xE6051000), /* PORT0CR */
+ PORTCR(1, 0xE6051001), /* PORT1CR */
+ PORTCR(2, 0xE6051002), /* PORT2CR */
+ PORTCR(3, 0xE6051003), /* PORT3CR */
+ PORTCR(4, 0xE6051004), /* PORT4CR */
+ PORTCR(5, 0xE6051005), /* PORT5CR */
+ PORTCR(6, 0xE6051006), /* PORT6CR */
+ PORTCR(7, 0xE6051007), /* PORT7CR */
+ PORTCR(8, 0xE6051008), /* PORT8CR */
+ PORTCR(9, 0xE6051009), /* PORT9CR */
+ PORTCR(10, 0xE605100A), /* PORT10CR */
+ PORTCR(11, 0xE605100B), /* PORT11CR */
+ PORTCR(12, 0xE605100C), /* PORT12CR */
+ PORTCR(13, 0xE605100D), /* PORT13CR */
+ PORTCR(14, 0xE605100E), /* PORT14CR */
+ PORTCR(15, 0xE605100F), /* PORT15CR */
+ PORTCR(16, 0xE6051010), /* PORT16CR */
+ PORTCR(17, 0xE6051011), /* PORT17CR */
+ PORTCR(18, 0xE6051012), /* PORT18CR */
+ PORTCR(19, 0xE6051013), /* PORT19CR */
+ PORTCR(20, 0xE6051014), /* PORT20CR */
+ PORTCR(21, 0xE6051015), /* PORT21CR */
+ PORTCR(22, 0xE6051016), /* PORT22CR */
+ PORTCR(23, 0xE6051017), /* PORT23CR */
+ PORTCR(24, 0xE6051018), /* PORT24CR */
+ PORTCR(25, 0xE6051019), /* PORT25CR */
+ PORTCR(26, 0xE605101A), /* PORT26CR */
+ PORTCR(27, 0xE605101B), /* PORT27CR */
+ PORTCR(28, 0xE605101C), /* PORT28CR */
+ PORTCR(29, 0xE605101D), /* PORT29CR */
+ PORTCR(30, 0xE605101E), /* PORT30CR */
+ PORTCR(31, 0xE605101F), /* PORT31CR */
+ PORTCR(32, 0xE6051020), /* PORT32CR */
+ PORTCR(33, 0xE6051021), /* PORT33CR */
+ PORTCR(34, 0xE6051022), /* PORT34CR */
+ PORTCR(35, 0xE6051023), /* PORT35CR */
+ PORTCR(36, 0xE6051024), /* PORT36CR */
+ PORTCR(37, 0xE6051025), /* PORT37CR */
+ PORTCR(38, 0xE6051026), /* PORT38CR */
+ PORTCR(39, 0xE6051027), /* PORT39CR */
+ PORTCR(40, 0xE6051028), /* PORT40CR */
+ PORTCR(41, 0xE6051029), /* PORT41CR */
+ PORTCR(42, 0xE605102A), /* PORT42CR */
+ PORTCR(43, 0xE605102B), /* PORT43CR */
+ PORTCR(44, 0xE605102C), /* PORT44CR */
+ PORTCR(45, 0xE605102D), /* PORT45CR */
+ PORTCR(46, 0xE605202E), /* PORT46CR */
+ PORTCR(47, 0xE605202F), /* PORT47CR */
+ PORTCR(48, 0xE6052030), /* PORT48CR */
+ PORTCR(49, 0xE6052031), /* PORT49CR */
+ PORTCR(50, 0xE6052032), /* PORT50CR */
+ PORTCR(51, 0xE6052033), /* PORT51CR */
+ PORTCR(52, 0xE6052034), /* PORT52CR */
+ PORTCR(53, 0xE6052035), /* PORT53CR */
+ PORTCR(54, 0xE6052036), /* PORT54CR */
+ PORTCR(55, 0xE6052037), /* PORT55CR */
+ PORTCR(56, 0xE6052038), /* PORT56CR */
+ PORTCR(57, 0xE6052039), /* PORT57CR */
+ PORTCR(58, 0xE605203A), /* PORT58CR */
+ PORTCR(59, 0xE605203B), /* PORT59CR */
+ PORTCR(60, 0xE605203C), /* PORT60CR */
+ PORTCR(61, 0xE605203D), /* PORT61CR */
+ PORTCR(62, 0xE605203E), /* PORT62CR */
+ PORTCR(63, 0xE605203F), /* PORT63CR */
+ PORTCR(64, 0xE6052040), /* PORT64CR */
+ PORTCR(65, 0xE6052041), /* PORT65CR */
+ PORTCR(66, 0xE6052042), /* PORT66CR */
+ PORTCR(67, 0xE6052043), /* PORT67CR */
+ PORTCR(68, 0xE6052044), /* PORT68CR */
+ PORTCR(69, 0xE6052045), /* PORT69CR */
+ PORTCR(70, 0xE6052046), /* PORT70CR */
+ PORTCR(71, 0xE6052047), /* PORT71CR */
+ PORTCR(72, 0xE6052048), /* PORT72CR */
+ PORTCR(73, 0xE6052049), /* PORT73CR */
+ PORTCR(74, 0xE605204A), /* PORT74CR */
+ PORTCR(75, 0xE605204B), /* PORT75CR */
+ PORTCR(76, 0xE605004C), /* PORT76CR */
+ PORTCR(77, 0xE605004D), /* PORT77CR */
+ PORTCR(78, 0xE605004E), /* PORT78CR */
+ PORTCR(79, 0xE605004F), /* PORT79CR */
+ PORTCR(80, 0xE6050050), /* PORT80CR */
+ PORTCR(81, 0xE6050051), /* PORT81CR */
+ PORTCR(82, 0xE6050052), /* PORT82CR */
+ PORTCR(83, 0xE6050053), /* PORT83CR */
+ PORTCR(84, 0xE6050054), /* PORT84CR */
+ PORTCR(85, 0xE6050055), /* PORT85CR */
+ PORTCR(86, 0xE6050056), /* PORT86CR */
+ PORTCR(87, 0xE6050057), /* PORT87CR */
+ PORTCR(88, 0xE6050058), /* PORT88CR */
+ PORTCR(89, 0xE6050059), /* PORT89CR */
+ PORTCR(90, 0xE605005A), /* PORT90CR */
+ PORTCR(91, 0xE605005B), /* PORT91CR */
+ PORTCR(92, 0xE605005C), /* PORT92CR */
+ PORTCR(93, 0xE605005D), /* PORT93CR */
+ PORTCR(94, 0xE605005E), /* PORT94CR */
+ PORTCR(95, 0xE605005F), /* PORT95CR */
+ PORTCR(96, 0xE6050060), /* PORT96CR */
+ PORTCR(97, 0xE6050061), /* PORT97CR */
+ PORTCR(98, 0xE6050062), /* PORT98CR */
+ PORTCR(99, 0xE6050063), /* PORT99CR */
+ PORTCR(100, 0xE6053064), /* PORT100CR */
+ PORTCR(101, 0xE6053065), /* PORT101CR */
+ PORTCR(102, 0xE6053066), /* PORT102CR */
+ PORTCR(103, 0xE6053067), /* PORT103CR */
+ PORTCR(104, 0xE6053068), /* PORT104CR */
+ PORTCR(105, 0xE6053069), /* PORT105CR */
+ PORTCR(106, 0xE605306A), /* PORT106CR */
+ PORTCR(107, 0xE605306B), /* PORT107CR */
+ PORTCR(108, 0xE605306C), /* PORT108CR */
+ PORTCR(109, 0xE605306D), /* PORT109CR */
+ PORTCR(110, 0xE605306E), /* PORT110CR */
+ PORTCR(111, 0xE605306F), /* PORT111CR */
+ PORTCR(112, 0xE6053070), /* PORT112CR */
+ PORTCR(113, 0xE6053071), /* PORT113CR */
+ PORTCR(114, 0xE6053072), /* PORT114CR */
+ PORTCR(115, 0xE6053073), /* PORT115CR */
+ PORTCR(116, 0xE6053074), /* PORT116CR */
+ PORTCR(117, 0xE6053075), /* PORT117CR */
+ PORTCR(118, 0xE6053076), /* PORT118CR */
+ PORTCR(119, 0xE6053077), /* PORT119CR */
+ PORTCR(120, 0xE6053078), /* PORT120CR */
+ PORTCR(121, 0xE6050079), /* PORT121CR */
+ PORTCR(122, 0xE605007A), /* PORT122CR */
+ PORTCR(123, 0xE605007B), /* PORT123CR */
+ PORTCR(124, 0xE605007C), /* PORT124CR */
+ PORTCR(125, 0xE605007D), /* PORT125CR */
+ PORTCR(126, 0xE605007E), /* PORT126CR */
+ PORTCR(127, 0xE605007F), /* PORT127CR */
+ PORTCR(128, 0xE6050080), /* PORT128CR */
+ PORTCR(129, 0xE6050081), /* PORT129CR */
+ PORTCR(130, 0xE6050082), /* PORT130CR */
+ PORTCR(131, 0xE6050083), /* PORT131CR */
+ PORTCR(132, 0xE6050084), /* PORT132CR */
+ PORTCR(133, 0xE6050085), /* PORT133CR */
+ PORTCR(134, 0xE6050086), /* PORT134CR */
+ PORTCR(135, 0xE6050087), /* PORT135CR */
+ PORTCR(136, 0xE6050088), /* PORT136CR */
+ PORTCR(137, 0xE6050089), /* PORT137CR */
+ PORTCR(138, 0xE605008A), /* PORT138CR */
+ PORTCR(139, 0xE605008B), /* PORT139CR */
+ PORTCR(140, 0xE605008C), /* PORT140CR */
+ PORTCR(141, 0xE605008D), /* PORT141CR */
+ PORTCR(142, 0xE605008E), /* PORT142CR */
+ PORTCR(143, 0xE605008F), /* PORT143CR */
+ PORTCR(144, 0xE6050090), /* PORT144CR */
+ PORTCR(145, 0xE6050091), /* PORT145CR */
+ PORTCR(146, 0xE6050092), /* PORT146CR */
+ PORTCR(147, 0xE6050093), /* PORT147CR */
+ PORTCR(148, 0xE6050094), /* PORT148CR */
+ PORTCR(149, 0xE6050095), /* PORT149CR */
+ PORTCR(150, 0xE6050096), /* PORT150CR */
+ PORTCR(151, 0xE6050097), /* PORT151CR */
+ PORTCR(152, 0xE6053098), /* PORT152CR */
+ PORTCR(153, 0xE6053099), /* PORT153CR */
+ PORTCR(154, 0xE605309A), /* PORT154CR */
+ PORTCR(155, 0xE605309B), /* PORT155CR */
+ PORTCR(156, 0xE605009C), /* PORT156CR */
+ PORTCR(157, 0xE605009D), /* PORT157CR */
+ PORTCR(158, 0xE605009E), /* PORT158CR */
+ PORTCR(159, 0xE605009F), /* PORT159CR */
+ PORTCR(160, 0xE60500A0), /* PORT160CR */
+ PORTCR(161, 0xE60500A1), /* PORT161CR */
+ PORTCR(162, 0xE60500A2), /* PORT162CR */
+ PORTCR(163, 0xE60500A3), /* PORT163CR */
+ PORTCR(164, 0xE60500A4), /* PORT164CR */
+ PORTCR(165, 0xE60500A5), /* PORT165CR */
+ PORTCR(166, 0xE60500A6), /* PORT166CR */
+ PORTCR(167, 0xE60520A7), /* PORT167CR */
+ PORTCR(168, 0xE60520A8), /* PORT168CR */
+ PORTCR(169, 0xE60520A9), /* PORT169CR */
+ PORTCR(170, 0xE60520AA), /* PORT170CR */
+ PORTCR(171, 0xE60520AB), /* PORT171CR */
+ PORTCR(172, 0xE60520AC), /* PORT172CR */
+ PORTCR(173, 0xE60520AD), /* PORT173CR */
+ PORTCR(174, 0xE60520AE), /* PORT174CR */
+ PORTCR(175, 0xE60520AF), /* PORT175CR */
+ PORTCR(176, 0xE60520B0), /* PORT176CR */
+ PORTCR(177, 0xE60520B1), /* PORT177CR */
+ PORTCR(178, 0xE60520B2), /* PORT178CR */
+ PORTCR(179, 0xE60520B3), /* PORT179CR */
+ PORTCR(180, 0xE60520B4), /* PORT180CR */
+ PORTCR(181, 0xE60520B5), /* PORT181CR */
+ PORTCR(182, 0xE60520B6), /* PORT182CR */
+ PORTCR(183, 0xE60520B7), /* PORT183CR */
+ PORTCR(184, 0xE60520B8), /* PORT184CR */
+ PORTCR(185, 0xE60520B9), /* PORT185CR */
+ PORTCR(186, 0xE60520BA), /* PORT186CR */
+ PORTCR(187, 0xE60520BB), /* PORT187CR */
+ PORTCR(188, 0xE60520BC), /* PORT188CR */
+ PORTCR(189, 0xE60520BD), /* PORT189CR */
+ PORTCR(190, 0xE60520BE), /* PORT190CR */
+
+ { PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) {
+ MSEL1CR_31_0, MSEL1CR_31_1,
+ MSEL1CR_30_0, MSEL1CR_30_1,
+ MSEL1CR_29_0, MSEL1CR_29_1,
+ MSEL1CR_28_0, MSEL1CR_28_1,
+ MSEL1CR_27_0, MSEL1CR_27_1,
+ MSEL1CR_26_0, MSEL1CR_26_1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL1CR_16_0, MSEL1CR_16_1,
+ MSEL1CR_15_0, MSEL1CR_15_1,
+ MSEL1CR_14_0, MSEL1CR_14_1,
+ MSEL1CR_13_0, MSEL1CR_13_1,
+ MSEL1CR_12_0, MSEL1CR_12_1,
+ 0, 0, 0, 0,
+ MSEL1CR_9_0, MSEL1CR_9_1,
+ MSEL1CR_8_0, MSEL1CR_8_1,
+ MSEL1CR_7_0, MSEL1CR_7_1,
+ MSEL1CR_6_0, MSEL1CR_6_1,
+ 0, 0,
+ MSEL1CR_4_0, MSEL1CR_4_1,
+ MSEL1CR_3_0, MSEL1CR_3_1,
+ MSEL1CR_2_0, MSEL1CR_2_1,
+ 0, 0,
+ MSEL1CR_0_0, MSEL1CR_0_1,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ MSEL3CR_27_0, MSEL3CR_27_1,
+ MSEL3CR_26_0, MSEL3CR_26_1,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ MSEL3CR_21_0, MSEL3CR_21_1,
+ MSEL3CR_20_0, MSEL3CR_20_1,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ MSEL3CR_15_0, MSEL3CR_15_1,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0,
+ MSEL3CR_9_0, MSEL3CR_9_1,
+ 0, 0, 0, 0,
+ MSEL3CR_6_0, MSEL3CR_6_1,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ MSEL4CR_19_0, MSEL4CR_19_1,
+ MSEL4CR_18_0, MSEL4CR_18_1,
+ MSEL4CR_17_0, MSEL4CR_17_1,
+ MSEL4CR_16_0, MSEL4CR_16_1,
+ MSEL4CR_15_0, MSEL4CR_15_1,
+ MSEL4CR_14_0, MSEL4CR_14_1,
+ 0, 0, 0, 0,
+ 0, 0,
+ MSEL4CR_10_0, MSEL4CR_10_1,
+ 0, 0, 0, 0,
+ 0, 0,
+ MSEL4CR_6_0, MSEL4CR_6_1,
+ 0, 0,
+ MSEL4CR_4_0, MSEL4CR_4_1,
+ 0, 0, 0, 0,
+ MSEL4CR_1_0, MSEL4CR_1_1,
+ 0, 0,
+ }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) {
+ PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+ PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+ PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+ PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+ PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) {
+ PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+ PORT123_DATA, PORT122_DATA, PORT121_DATA, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA,
+ }
+ },
+ { PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) {
+ PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+ 0, 0, 0, 0,
+ PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+ PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+ PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+ PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+ PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+ PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA,
+ }
+ },
+ { PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+ PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA,
+ }
+ },
+ { PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) {
+ PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+ PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+ PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+ PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+ PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+ PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+ PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+ PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA,
+ }
+ },
+ { PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, PORT45_DATA, PORT44_DATA,
+ PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+ PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+ PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA,
+ }
+ },
+ { PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) {
+ PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+ PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+ PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+ PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+ PORT47_DATA, PORT46_DATA, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+ PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+ PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA,
+ }
+ },
+ { PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) {
+ 0, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+ PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+ PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+ PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+ PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+ PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+ PORT167_DATA, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, PORT120_DATA,
+ PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+ PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+ PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+ PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+ PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) {
+ 0, 0, 0, 0,
+ PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { },
+};
+
+static struct pinmux_info sh7372_pinmux_info = {
+ .name = "sh7372_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PORT0,
+ .last_gpio = GPIO_FN_SDENC_DV_CLKI,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7372_pinmux_init(void)
+{
+ register_pinmux(&sh7372_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
new file mode 100644
index 0000000..613e684
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -0,0 +1,1767 @@
+/*
+ * sh7377 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010 NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx) \
+ _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
+ _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
+ _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
+ _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
+ _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx) \
+ _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
+ _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
+ _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
+ _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
+ _10(fn, pfx##9, sfx)
+
+#define _265(fn, pfx, sfx) \
+ _10(fn, pfx, sfx), _90(fn, pfx, sfx), \
+ _10(fn, pfx##10, sfx), \
+ _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
+ _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
+ _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
+ _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
+ _1(fn, pfx##118, sfx), \
+ _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
+ _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
+ _10(fn, pfx##15, sfx), \
+ _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
+ _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
+ _1(fn, pfx##164, sfx), \
+ _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
+ _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
+ _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
+ _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
+ _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
+ _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
+ _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
+ _1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx), \
+ _1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx), \
+ _1(fn, pfx##264, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_265(str) _265(_PORT, PORT, str)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+ PINMUX_INPUT_END,
+
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+ PINMUX_INPUT_PULLUP_END,
+
+ PINMUX_INPUT_PULLDOWN_BEGIN,
+ PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+ PINMUX_INPUT_PULLDOWN_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+ PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+ PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+ PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+ PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+ PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+ PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+ PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+ PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+ PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+
+ MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
+ MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+ /* Special Pull-up / Pull-down Functions */
+ PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK,
+ PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK,
+ PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK,
+ PORT72_KEYIN6_PU_MARK,
+
+ /* 55-1 */
+ VBUS_0_MARK,
+ CPORT0_MARK,
+ CPORT1_MARK,
+ CPORT2_MARK,
+ CPORT3_MARK,
+ CPORT4_MARK,
+ CPORT5_MARK,
+ CPORT6_MARK,
+ CPORT7_MARK,
+ CPORT8_MARK,
+ CPORT9_MARK,
+ CPORT10_MARK,
+ CPORT11_MARK, SIN2_MARK,
+ CPORT12_MARK, XCTS2_MARK,
+ CPORT13_MARK, RFSPO4_MARK,
+ CPORT14_MARK, RFSPO5_MARK,
+ CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK,
+ CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK,
+ CPORT17_IC_OE_MARK, SOUT2_MARK,
+ CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK,
+ CPORT19_MPORT1_MARK,
+ CPORT20_MARK, RFSPO6_MARK,
+ CPORT21_MARK, STATUS0_MARK,
+ CPORT22_MARK, STATUS1_MARK,
+ CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+ B_SYNLD1_MARK,
+ B_SYNLD2_MARK, SYSENMSK_MARK,
+ XMAINPS_MARK,
+ XDIVPS_MARK,
+ XIDRST_MARK,
+ IDCLK_MARK, IC_DP_MARK,
+ IDIO_MARK, IC_DM_MARK,
+ SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK,
+ SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+ XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+ XCTS1_MARK, SCIFA4_CTS_MARK,
+ PCMCLKO_MARK,
+ SYNC8KO_MARK,
+
+ /* 55-2 */
+ DNPCM_A_MARK,
+ UPPCM_A_MARK,
+ VACK_MARK,
+ XTALB1L_MARK,
+ GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+ GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+ GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK,
+ GPS_IM_MARK,
+ GPS_IS_MARK,
+ GPS_QM_MARK,
+ GPS_QS_MARK,
+ FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK,
+ FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK,
+ FMSIOLR_MARK,
+ FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK,
+ FMSIOBT_MARK,
+ FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK,
+ FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK,
+ FMSIILR_MARK,
+ FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK,
+ FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK,
+ A0_EA0_MARK, BS_MARK,
+ A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK,
+ A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK,
+ A14_EA14_MARK, PORT60_KEYOUT5_MARK,
+ A15_EA15_MARK, PORT61_KEYOUT4_MARK,
+ A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK,
+ A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+ A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+ A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK,
+ A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK,
+ A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+ A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK,
+ A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK,
+ A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK,
+ A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK,
+ A26_MARK, PORT72_KEYIN6_MARK,
+ D0_ED0_NAF0_MARK,
+ D1_ED1_NAF1_MARK,
+ D2_ED2_NAF2_MARK,
+ D3_ED3_NAF3_MARK,
+ D4_ED4_NAF4_MARK,
+ D5_ED5_NAF5_MARK,
+ D6_ED6_NAF6_MARK,
+ D7_ED7_NAF7_MARK,
+ D8_ED8_NAF8_MARK,
+ D9_ED9_NAF9_MARK,
+ D10_ED10_NAF10_MARK,
+ D11_ED11_NAF11_MARK,
+ D12_ED12_NAF12_MARK,
+ D13_ED13_NAF13_MARK,
+ D14_ED14_NAF14_MARK,
+ D15_ED15_NAF15_MARK,
+ CS4_MARK,
+ CS5A_MARK, FMSICK_MARK,
+ CS5B_MARK, FCE1_MARK,
+
+ /* 55-3 */
+ CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK,
+ FCE0_MARK,
+ WAIT_MARK, DREQ0_MARK,
+ RD_XRD_MARK,
+ WE0_XWR0_FWE_MARK,
+ WE1_XWR1_MARK,
+ FRB_MARK,
+ CKO_MARK,
+ NBRSTOUT_MARK,
+ NBRST_MARK,
+ GPS_EPPSIN_MARK,
+ LATCHPULSE_MARK,
+ LTESIGNAL_MARK,
+ LEGACYSTATE_MARK,
+ TCKON_MARK,
+ VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK,
+ VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK,
+ VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK,
+ VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK,
+ VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK,
+ VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK,
+ VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK,
+ VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK,
+ VIO_D6_MARK, PORT136_KEYIN2_MARK,
+ VIO_D7_MARK, PORT137_KEYIN3_MARK,
+ VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK,
+ VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK,
+ VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK,
+ VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK,
+ VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK,
+ VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK,
+ VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK,
+ VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK,
+ VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK,
+ VIO_FIELD_MARK, PORT147_KEYIN5_MARK,
+ VIO_CKO_MARK, PORT148_KEYIN6_MARK,
+ A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK,
+ MFG0_IN2_MARK,
+ TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+ TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+ TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+ SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+ SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+ XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK,
+ XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK,
+
+ /* 55-4 */
+ DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+ PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+ PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK,
+ PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK,
+ MFG3_IN2_MARK,
+ PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK,
+ MFG3_IN1_MARK,
+ PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK,
+ MFG3_OUT1_MARK, TPU3TO0_MARK,
+ LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK,
+ LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK,
+ BBIF2_TSYNC1_MARK,
+ LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK,
+ BBIF2_TSCK1_MARK,
+ LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK,
+ BBIF2_TXD1_MARK,
+ LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK,
+ LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK,
+ MFG2_OUT2_MARK,
+ TPU2TO1_MARK,
+ LCDD6_MARK, XWR2_MARK,
+ LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+ LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK,
+ LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK,
+ LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK,
+ LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK,
+ LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK,
+ LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK,
+ LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK,
+ LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK,
+ VIO_DR7_MARK, D23_MARK, ED23_MARK,
+ LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK,
+ VIO_VDR_MARK, D24_MARK, ED24_MARK,
+ LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK,
+ LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK,
+ LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK,
+ LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK,
+ LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK,
+ LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK,
+ LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK,
+ LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK,
+ LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK,
+ LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+ PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK,
+ LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK,
+ LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK,
+ LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK,
+ LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK,
+ SCIFA1_TXD_MARK, OVCN2_MARK,
+ EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK,
+ SCIFA1_RTS_MARK, IDIN_MARK,
+ SCIFA1_RXD_MARK,
+ SCIFA1_CTS_MARK, MFG1_IN1_MARK,
+ MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK,
+ MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK,
+ MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK,
+ MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK,
+ PORT233_FSIACK_MARK,
+ MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK,
+ MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK,
+ MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK,
+ MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK,
+ MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+
+ /* 55-5 */
+ MSIOF1_SS2_MARK,
+ SCIFA6_TXD_MARK,
+ PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK,
+ TPU4TO0_MARK,
+ PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+ PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+ PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK,
+ PORT244_MSIOF2_RXD_MARK,
+ PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK,
+ PORT245_MSIOF2_TXD_MARK,
+ PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK,
+ TPU1TO0_MARK,
+ PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK,
+ TPU3TO1_MARK,
+ PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK,
+ TPU2TO0_MARK,
+ PORT248_MSIOF2_TSCK_MARK,
+ PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK,
+ SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK,
+ SDHICD0_MARK,
+ SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK,
+ SDHID0_1_MARK, TDO2_SWO0_MC0_MARK,
+ SDHID0_2_MARK, TDI2_MARK,
+ SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK,
+ SDHICMD0_MARK, TRST2_MARK,
+ SDHIWP0_MARK, EDBGREQ2_MARK,
+ SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK,
+ SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK,
+ TMS3_SWDIO_MC1_MARK,
+ SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK,
+ SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK,
+ SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK,
+ SDHICMD1_MARK, TRST3_MARK,
+ RESETOUTS_MARK,
+ PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_OUT, PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_OUT, PORT##nr##_IN, \
+ PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_OUT, PORT##nr##_IN, \
+ PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+ PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+ PORT##nr##_OUT, PORT##nr##_IN, \
+ PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+static pinmux_enum_t pinmux_data[] = {
+ /* specify valid pin states for each pin in GPIO mode */
+ /* 55-1 (GPIO) */
+ PORT_DATA_I_PD(0), PORT_DATA_I_PU(1),
+ PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+ PORT_DATA_I_PU(4), PORT_DATA_I_PU(5),
+ PORT_DATA_I_PU(6), PORT_DATA_I_PU(7),
+ PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+ PORT_DATA_I_PU(10), PORT_DATA_I_PU(11),
+ PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13),
+ PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+ PORT_DATA_O(16), PORT_DATA_IO(17),
+ PORT_DATA_O(18), PORT_DATA_O(19),
+ PORT_DATA_O(20), PORT_DATA_O(21),
+ PORT_DATA_O(22), PORT_DATA_O(23),
+ PORT_DATA_O(24), PORT_DATA_I_PD(25),
+ PORT_DATA_I_PD(26), PORT_DATA_O(27),
+ PORT_DATA_O(28), PORT_DATA_O(29),
+ PORT_DATA_IO(30), PORT_DATA_IO_PU(31),
+ PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33),
+ PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35),
+ PORT_DATA_O(36), PORT_DATA_IO(37),
+
+ /* 55-2 (GPIO) */
+ PORT_DATA_O(38), PORT_DATA_I_PU(39),
+ PORT_DATA_I_PU_PD(40), PORT_DATA_O(41),
+ PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43),
+ PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45),
+ PORT_DATA_I_PD(46), PORT_DATA_I_PD(47),
+ PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49),
+ PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51),
+ PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53),
+ PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55),
+ PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57),
+ PORT_DATA_IO(58), PORT_DATA_IO(59),
+ PORT_DATA_IO(60), PORT_DATA_IO(61),
+ PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+ PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+ PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+ PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+ PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+ PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73),
+ PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75),
+ PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77),
+ PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79),
+ PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81),
+ PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83),
+ PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85),
+ PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87),
+ PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89),
+ PORT_DATA_O(90), PORT_DATA_IO_PU(91),
+ PORT_DATA_O(92),
+
+ /* 55-3 (GPIO) */
+ PORT_DATA_IO_PU(93),
+ PORT_DATA_O(94),
+ PORT_DATA_I_PU_PD(95),
+ PORT_DATA_IO(96), PORT_DATA_IO(97),
+ PORT_DATA_IO(98), PORT_DATA_I_PU(99),
+ PORT_DATA_O(100), PORT_DATA_O(101),
+ PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103),
+ PORT_DATA_I_PD(104), PORT_DATA_I_PD(105),
+ PORT_DATA_I_PD(106), PORT_DATA_I_PD(107),
+ PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109),
+ PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111),
+ PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+ PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115),
+ PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117),
+ PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128),
+ PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130),
+ PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132),
+ PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134),
+ PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136),
+ PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138),
+ PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140),
+ PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142),
+ PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144),
+ PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146),
+ PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148),
+ PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150),
+ PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152),
+ PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154),
+ PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156),
+ PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158),
+
+ /* 55-4 (GPIO) */
+ PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160),
+ PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162),
+ PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164),
+ PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193),
+ PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+ PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197),
+ PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199),
+ PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
+ PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
+ PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+ PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207),
+ PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209),
+ PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+ PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213),
+ PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215),
+ PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217),
+ PORT_DATA_O(218), PORT_DATA_IO_PD(219),
+ PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221),
+ PORT_DATA_IO_PU_PD(222),
+ PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224),
+ PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226),
+ PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228),
+ PORT_DATA_I_PD(229), PORT_DATA_IO(230),
+ PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232),
+ PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234),
+ PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236),
+ PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238),
+
+ /* 55-5 (GPIO) */
+ PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240),
+ PORT_DATA_O(241), PORT_DATA_I_PD(242),
+ PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244),
+ PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246),
+ PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248),
+ PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250),
+ PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252),
+ PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254),
+ PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256),
+ PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258),
+ PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260),
+ PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262),
+ PORT_DATA_IO_PU_PD(263),
+
+ /* Special Pull-up / Pull-down Functions */
+ PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT66_FN2, PORT66_IN_PU),
+ PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT67_FN2, PORT67_IN_PU),
+ PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT68_FN2, PORT68_IN_PU),
+ PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT69_FN2, PORT69_IN_PU),
+ PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT70_FN2, PORT70_IN_PU),
+ PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT71_FN2, PORT71_IN_PU),
+ PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+ PORT72_FN2, PORT72_IN_PU),
+
+
+ /* 55-1 (FN) */
+ PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+ PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+ PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+ PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+ PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+ PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+ PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+ PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+ PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+ PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+ PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+ PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+ PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+ PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+ PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+ PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+ PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+ PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+ PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+ PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+ PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+ PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2),
+ PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3),
+ PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+ PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+ PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3),
+ PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1),
+ PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+ PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+ PINMUX_DATA(XRTS2_MARK, PORT19_FN2),
+ PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+ PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1),
+ PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+ PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+ PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+ PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+ PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+ PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+ PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+ PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+ PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+ PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1),
+ PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1),
+ PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2),
+ PINMUX_DATA(XMAINPS_MARK, PORT27_FN1),
+ PINMUX_DATA(XDIVPS_MARK, PORT28_FN1),
+ PINMUX_DATA(XIDRST_MARK, PORT29_FN1),
+ PINMUX_DATA(IDCLK_MARK, PORT30_FN1),
+ PINMUX_DATA(IC_DP_MARK, PORT30_FN2),
+ PINMUX_DATA(IDIO_MARK, PORT31_FN1),
+ PINMUX_DATA(IC_DM_MARK, PORT31_FN2),
+ PINMUX_DATA(SOUT1_MARK, PORT32_FN1),
+ PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+ PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3),
+ PINMUX_DATA(SIN1_MARK, PORT33_FN1),
+ PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2),
+ PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+ PINMUX_DATA(XRTS1_MARK, PORT34_FN1),
+ PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2),
+ PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3),
+ PINMUX_DATA(XCTS1_MARK, PORT35_FN1),
+ PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2),
+ PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1),
+ PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1),
+
+ /* 55-2 (FN) */
+ PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1),
+ PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1),
+ PINMUX_DATA(VACK_MARK, PORT40_FN1),
+ PINMUX_DATA(XTALB1L_MARK, PORT41_FN1),
+ PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1),
+ PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2),
+ PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1),
+ PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+ PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1),
+ PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2),
+ PINMUX_DATA(GPS_IM_MARK, PORT45_FN1),
+ PINMUX_DATA(GPS_IS_MARK, PORT46_FN1),
+ PINMUX_DATA(GPS_QM_MARK, PORT47_FN1),
+ PINMUX_DATA(GPS_QS_MARK, PORT48_FN1),
+ PINMUX_DATA(FMSOCK_MARK, PORT49_FN1),
+ PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2),
+ PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3),
+ PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1),
+ PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2),
+ PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3),
+ PINMUX_DATA(IPORT3_MARK, PORT50_FN4),
+ PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5),
+ PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1),
+ PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2),
+ PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3),
+ PINMUX_DATA(OPORT1_MARK, PORT51_FN4),
+ PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5),
+ PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1),
+ PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+ PINMUX_DATA(OPORT2_MARK, PORT52_FN3),
+ PINMUX_DATA(FMSOILR_MARK, PORT53_FN1),
+ PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2),
+ PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3),
+ PINMUX_DATA(OPORT3_MARK, PORT53_FN4),
+ PINMUX_DATA(FMSIILR_MARK, PORT53_FN5),
+ PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1),
+ PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2),
+ PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3),
+ PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4),
+ PINMUX_DATA(FMSISLD_MARK, PORT55_FN1),
+ PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2),
+ PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+ PINMUX_DATA(A0_EA0_MARK, PORT57_FN1),
+ PINMUX_DATA(BS_MARK, PORT57_FN2),
+ PINMUX_DATA(A12_EA12_MARK, PORT58_FN1),
+ PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2),
+ PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3),
+ PINMUX_DATA(A13_EA13_MARK, PORT59_FN1),
+ PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2),
+ PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3),
+ PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+ PINMUX_DATA(A14_EA14_MARK, PORT60_FN1),
+ PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2),
+ PINMUX_DATA(A15_EA15_MARK, PORT61_FN1),
+ PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2),
+ PINMUX_DATA(A16_EA16_MARK, PORT62_FN1),
+ PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3),
+ PINMUX_DATA(A17_EA17_MARK, PORT63_FN1),
+ PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3),
+ PINMUX_DATA(A18_EA18_MARK, PORT64_FN1),
+ PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2),
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3),
+ PINMUX_DATA(A19_EA19_MARK, PORT65_FN1),
+ PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3),
+ PINMUX_DATA(A20_EA20_MARK, PORT66_FN1),
+ PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3),
+ PINMUX_DATA(A21_EA21_MARK, PORT67_FN1),
+ PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3),
+ PINMUX_DATA(A22_EA22_MARK, PORT68_FN1),
+ PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2),
+ PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3),
+ PINMUX_DATA(A23_EA23_MARK, PORT69_FN1),
+ PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2),
+ PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3),
+ PINMUX_DATA(A24_EA24_MARK, PORT70_FN1),
+ PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3),
+ PINMUX_DATA(A25_EA25_MARK, PORT71_FN1),
+ PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3),
+ PINMUX_DATA(A26_MARK, PORT72_FN1),
+ PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2),
+ PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1),
+ PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1),
+ PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1),
+ PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1),
+ PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1),
+ PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1),
+ PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1),
+ PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1),
+ PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1),
+ PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1),
+ PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1),
+ PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1),
+ PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1),
+ PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1),
+ PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1),
+ PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1),
+ PINMUX_DATA(CS4_MARK, PORT90_FN1),
+ PINMUX_DATA(CS5A_MARK, PORT91_FN1),
+ PINMUX_DATA(FMSICK_MARK, PORT91_FN2),
+ PINMUX_DATA(CS5B_MARK, PORT92_FN1),
+ PINMUX_DATA(FCE1_MARK, PORT92_FN2),
+
+ /* 55-3 (FN) */
+ PINMUX_DATA(CS6B_MARK, PORT93_FN1),
+ PINMUX_DATA(XCS2_MARK, PORT93_FN2),
+ PINMUX_DATA(CS6A_MARK, PORT93_FN3),
+ PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+ PINMUX_DATA(FCE0_MARK, PORT94_FN1),
+ PINMUX_DATA(WAIT_MARK, PORT95_FN1),
+ PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+ PINMUX_DATA(RD_XRD_MARK, PORT96_FN1),
+ PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1),
+ PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1),
+ PINMUX_DATA(FRB_MARK, PORT99_FN1),
+ PINMUX_DATA(CKO_MARK, PORT100_FN1),
+ PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1),
+ PINMUX_DATA(NBRST_MARK, PORT102_FN1),
+ PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1),
+ PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1),
+ PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1),
+ PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1),
+ PINMUX_DATA(TCKON_MARK, PORT118_FN1),
+ PINMUX_DATA(VIO_VD_MARK, PORT128_FN1),
+ PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2),
+ PINMUX_DATA(IPORT0_MARK, PORT128_FN3),
+ PINMUX_DATA(VIO_HD_MARK, PORT129_FN1),
+ PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2),
+ PINMUX_DATA(IPORT1_MARK, PORT129_FN3),
+ PINMUX_DATA(VIO_D0_MARK, PORT130_FN1),
+ PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2),
+ PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3),
+ PINMUX_DATA(VIO_D1_MARK, PORT131_FN1),
+ PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2),
+ PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3),
+ PINMUX_DATA(VIO_D2_MARK, PORT132_FN1),
+ PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2),
+ PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3),
+ PINMUX_DATA(VIO_D3_MARK, PORT133_FN1),
+ PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2),
+ PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3),
+ PINMUX_DATA(VIO_D4_MARK, PORT134_FN1),
+ PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2),
+ PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3),
+ PINMUX_DATA(VIO_D5_MARK, PORT135_FN1),
+ PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2),
+ PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3),
+ PINMUX_DATA(VIO_D6_MARK, PORT136_FN1),
+ PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2),
+ PINMUX_DATA(VIO_D7_MARK, PORT137_FN1),
+ PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2),
+ PINMUX_DATA(VIO_D8_MARK, PORT138_FN1),
+ PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2),
+ PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3),
+ PINMUX_DATA(VIO_D9_MARK, PORT139_FN1),
+ PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2),
+ PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3),
+ PINMUX_DATA(VIO_D10_MARK, PORT140_FN1),
+ PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2),
+ PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3),
+ PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4),
+ PINMUX_DATA(VIO_D11_MARK, PORT141_FN1),
+ PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2),
+ PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3),
+ PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4),
+ PINMUX_DATA(VIO_D12_MARK, PORT142_FN1),
+ PINMUX_DATA(M13_BSW_MARK, PORT142_FN2),
+ PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3),
+ PINMUX_DATA(VIO_D13_MARK, PORT143_FN1),
+ PINMUX_DATA(M14_GSW_MARK, PORT143_FN2),
+ PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3),
+ PINMUX_DATA(VIO_D14_MARK, PORT144_FN1),
+ PINMUX_DATA(M15_RSW_MARK, PORT144_FN2),
+ PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3),
+ PINMUX_DATA(VIO_D15_MARK, PORT145_FN1),
+ PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2),
+ PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3),
+ PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1),
+ PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2),
+ PINMUX_DATA(IPORT2_MARK, PORT146_FN3),
+ PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1),
+ PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2),
+ PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+ PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2),
+ PINMUX_DATA(A27_MARK, PORT149_FN1),
+ PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2),
+ PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3),
+ PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1),
+ PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1),
+ PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2),
+ PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1),
+ PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2),
+ PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1),
+ PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2),
+ PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3),
+ PINMUX_DATA(SOUT3_MARK, PORT154_FN1),
+ PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2),
+ PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3),
+ PINMUX_DATA(SIN3_MARK, PORT155_FN1),
+ PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2),
+ PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3),
+ PINMUX_DATA(XRTS3_MARK, PORT156_FN1),
+ PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2),
+ PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3),
+ PINMUX_DATA(XCTS3_MARK, PORT157_FN1),
+ PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2),
+ PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3),
+
+ /* 55-4 (FN) */
+ PINMUX_DATA(DINT_MARK, PORT158_FN1),
+ PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2),
+ PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3),
+ PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1),
+ PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2),
+ PINMUX_DATA(NMI_MARK, PORT159_FN3),
+ PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1),
+ PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2),
+ PINMUX_DATA(SOUT0_MARK, PORT160_FN3),
+ PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1),
+ PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2),
+ PINMUX_DATA(XCTS0_MARK, PORT161_FN3),
+ PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4),
+ PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1),
+ PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2),
+ PINMUX_DATA(SIN0_MARK, PORT162_FN3),
+ PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4),
+ PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1),
+ PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2),
+ PINMUX_DATA(XRTS0_MARK, PORT163_FN3),
+ PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4),
+ PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+ PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+ PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2),
+ PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3),
+ PINMUX_DATA(LCDD1_MARK, PORT193_FN1),
+ PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2),
+ PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3),
+ PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4),
+ PINMUX_DATA(LCDD2_MARK, PORT194_FN1),
+ PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2),
+ PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3),
+ PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4),
+ PINMUX_DATA(LCDD3_MARK, PORT195_FN1),
+ PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2),
+ PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3),
+ PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4),
+ PINMUX_DATA(LCDD4_MARK, PORT196_FN1),
+ PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2),
+ PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3),
+ PINMUX_DATA(LCDD5_MARK, PORT197_FN1),
+ PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2),
+ PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3),
+ PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4),
+ PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+ PINMUX_DATA(LCDD7_MARK, PORT199_FN1),
+ PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2),
+ PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3),
+ PINMUX_DATA(LCDD8_MARK, PORT200_FN1),
+ PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2),
+ PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3),
+ PINMUX_DATA(D16_MARK, PORT200_FN4),
+ PINMUX_DATA(LCDD9_MARK, PORT201_FN1),
+ PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2),
+ PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3),
+ PINMUX_DATA(D17_MARK, PORT201_FN4),
+ PINMUX_DATA(LCDD10_MARK, PORT202_FN1),
+ PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2),
+ PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3),
+ PINMUX_DATA(D18_MARK, PORT202_FN4),
+ PINMUX_DATA(LCDD11_MARK, PORT203_FN1),
+ PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2),
+ PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3),
+ PINMUX_DATA(D19_MARK, PORT203_FN4),
+ PINMUX_DATA(LCDD12_MARK, PORT204_FN1),
+ PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2),
+ PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3),
+ PINMUX_DATA(D20_MARK, PORT204_FN4),
+ PINMUX_DATA(LCDD13_MARK, PORT205_FN1),
+ PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2),
+ PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3),
+ PINMUX_DATA(D21_MARK, PORT205_FN4),
+ PINMUX_DATA(LCDD14_MARK, PORT206_FN1),
+ PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2),
+ PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3),
+ PINMUX_DATA(D22_MARK, PORT206_FN4),
+ PINMUX_DATA(LCDD15_MARK, PORT207_FN1),
+ PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2),
+ PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3),
+ PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4),
+ PINMUX_DATA(D23_MARK, PORT207_FN5),
+ PINMUX_DATA(LCDD16_MARK, PORT208_FN1),
+ PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2),
+ PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3),
+ PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4),
+ PINMUX_DATA(D24_MARK, PORT208_FN5),
+ PINMUX_DATA(LCDD17_MARK, PORT209_FN1),
+ PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2),
+ PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3),
+ PINMUX_DATA(D25_MARK, PORT209_FN4),
+ PINMUX_DATA(LCDD18_MARK, PORT210_FN1),
+ PINMUX_DATA(DREQ2_MARK, PORT210_FN2),
+ PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3),
+ PINMUX_DATA(D26_MARK, PORT210_FN4),
+ PINMUX_DATA(LCDD19_MARK, PORT211_FN1),
+ PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2),
+ PINMUX_DATA(D27_MARK, PORT211_FN3),
+ PINMUX_DATA(LCDD20_MARK, PORT212_FN1),
+ PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2),
+ PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3),
+ PINMUX_DATA(D28_MARK, PORT212_FN4),
+ PINMUX_DATA(LCDD21_MARK, PORT213_FN1),
+ PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2),
+ PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3),
+ PINMUX_DATA(D29_MARK, PORT213_FN4),
+ PINMUX_DATA(LCDD22_MARK, PORT214_FN1),
+ PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2),
+ PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3),
+ PINMUX_DATA(D30_MARK, PORT214_FN4),
+ PINMUX_DATA(LCDD23_MARK, PORT215_FN1),
+ PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2),
+ PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3),
+ PINMUX_DATA(D31_MARK, PORT215_FN4),
+ PINMUX_DATA(LCDDCK_MARK, PORT216_FN1),
+ PINMUX_DATA(LCDWR_MARK, PORT216_FN2),
+ PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3),
+ PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4),
+ PINMUX_DATA(LCDRD_MARK, PORT217_FN1),
+ PINMUX_DATA(DACK2_MARK, PORT217_FN2),
+ PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3),
+ PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1),
+ PINMUX_DATA(LCDCS_MARK, PORT218_FN2),
+ PINMUX_DATA(LCDCS2_MARK, PORT218_FN3),
+ PINMUX_DATA(DACK3_MARK, PORT218_FN4),
+ PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+ PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6),
+ PINMUX_DATA(LCDDISP_MARK, PORT219_FN1),
+ PINMUX_DATA(LCDRS_MARK, PORT219_FN2),
+ PINMUX_DATA(DREQ3_MARK, PORT219_FN3),
+ PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4),
+ PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1),
+ PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+ PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3),
+ PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1),
+ PINMUX_DATA(DREQ1_MARK, PORT221_FN2),
+ PINMUX_DATA(PWEN_MARK, PORT221_FN3),
+ PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4),
+ PINMUX_DATA(LCDDON_MARK, PORT222_FN1),
+ PINMUX_DATA(LCDDON2_MARK, PORT222_FN2),
+ PINMUX_DATA(DACK1_MARK, PORT222_FN3),
+ PINMUX_DATA(OVCN_MARK, PORT222_FN4),
+ PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5),
+ PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1),
+ PINMUX_DATA(OVCN2_MARK, PORT225_FN2),
+ PINMUX_DATA(EXTLP_MARK, PORT226_FN1),
+ PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2),
+ PINMUX_DATA(USBTERM_MARK, PORT226_FN3),
+ PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4),
+ PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1),
+ PINMUX_DATA(IDIN_MARK, PORT227_FN2),
+ PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1),
+ PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1),
+ PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2),
+ PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1),
+ PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2),
+ PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3),
+ PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1),
+ PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2),
+ PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3),
+ PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1),
+ PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2),
+ PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3),
+ PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1),
+ PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2),
+ PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3),
+ PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1),
+ PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2),
+ PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1),
+ PINMUX_DATA(OPORT0_MARK, PORT235_FN2),
+ PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3),
+ PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4),
+ PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1),
+ PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2),
+ PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3),
+ PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1),
+ PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2),
+ PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3),
+ PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1),
+ PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2),
+
+ /* 55-5 (FN) */
+ PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1),
+ PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+ PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1),
+ PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2),
+ PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3),
+ PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+ PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1),
+ PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2),
+ PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1),
+ PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+ PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1),
+ PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2),
+ PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3),
+ PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1),
+ PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2),
+ PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3),
+ PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1),
+ PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2),
+ PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3),
+ PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+ PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1),
+ PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2),
+ PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3),
+ PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+ PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1),
+ PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2),
+ PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3),
+ PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4),
+ PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1),
+ PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2),
+ PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+ PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2),
+ PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+ PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+ PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2),
+ PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+ PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2),
+ PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+ PINMUX_DATA(TDI2_MARK, PORT254_FN2),
+ PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+ PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2),
+ PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+ PINMUX_DATA(TRST2_MARK, PORT256_FN2),
+ PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+ PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2),
+ PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+ PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2),
+ PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1),
+ PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2),
+ PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+ PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4),
+ PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1),
+ PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2),
+ PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+ PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4),
+ PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1),
+ PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2),
+ PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+ PINMUX_DATA(TDI3_MARK, PORT261_FN4),
+ PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1),
+ PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2),
+ PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+ PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4),
+ PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+ PINMUX_DATA(TRST3_MARK, PORT263_FN2),
+ PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ /* 55-1 -> 55-5 (GPIO) */
+ GPIO_PORT_265(),
+
+ /* Special Pull-up / Pull-down Functions */
+ GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
+ GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU),
+ GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU),
+ GPIO_FN(PORT72_KEYIN6_PU),
+
+ /* 55-1 (FN) */
+ GPIO_FN(VBUS_0),
+ GPIO_FN(CPORT0),
+ GPIO_FN(CPORT1),
+ GPIO_FN(CPORT2),
+ GPIO_FN(CPORT3),
+ GPIO_FN(CPORT4),
+ GPIO_FN(CPORT5),
+ GPIO_FN(CPORT6),
+ GPIO_FN(CPORT7),
+ GPIO_FN(CPORT8),
+ GPIO_FN(CPORT9),
+ GPIO_FN(CPORT10),
+ GPIO_FN(CPORT11), GPIO_FN(SIN2),
+ GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+ GPIO_FN(CPORT13), GPIO_FN(RFSPO4),
+ GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+ GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2),
+ GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3),
+ GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2),
+ GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2),
+ GPIO_FN(CPORT19_MPORT1),
+ GPIO_FN(CPORT20), GPIO_FN(RFSPO6),
+ GPIO_FN(CPORT21), GPIO_FN(STATUS0),
+ GPIO_FN(CPORT22), GPIO_FN(STATUS1),
+ GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+ GPIO_FN(B_SYNLD1),
+ GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK),
+ GPIO_FN(XMAINPS),
+ GPIO_FN(XDIVPS),
+ GPIO_FN(XIDRST),
+ GPIO_FN(IDCLK), GPIO_FN(IC_DP),
+ GPIO_FN(IDIO), GPIO_FN(IC_DM),
+ GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT),
+ GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+ GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+ GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+ GPIO_FN(PCMCLKO),
+ GPIO_FN(SYNC8KO),
+
+ /* 55-2 (FN) */
+ GPIO_FN(DNPCM_A),
+ GPIO_FN(UPPCM_A),
+ GPIO_FN(VACK),
+ GPIO_FN(XTALB1L),
+ GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+ GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+ GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS),
+ GPIO_FN(GPS_IM),
+ GPIO_FN(GPS_IS),
+ GPIO_FN(GPS_QM),
+ GPIO_FN(GPS_QS),
+ GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT),
+ GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2),
+ GPIO_FN(IPORT3), GPIO_FN(FMSIOLR),
+ GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3),
+ GPIO_FN(OPORT1), GPIO_FN(FMSIOBT),
+ GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2),
+ GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3),
+ GPIO_FN(OPORT3), GPIO_FN(FMSIILR),
+ GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2),
+ GPIO_FN(FMSIIBT),
+ GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0),
+ GPIO_FN(A0_EA0), GPIO_FN(BS),
+ GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2),
+ GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2),
+ GPIO_FN(TPU0TO1),
+ GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5),
+ GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4),
+ GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1),
+ GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC),
+ GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK),
+ GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD),
+ GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK),
+ GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC),
+ GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0),
+ GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1),
+ GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD),
+ GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2),
+ GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6),
+ GPIO_FN(D0_ED0_NAF0),
+ GPIO_FN(D1_ED1_NAF1),
+ GPIO_FN(D2_ED2_NAF2),
+ GPIO_FN(D3_ED3_NAF3),
+ GPIO_FN(D4_ED4_NAF4),
+ GPIO_FN(D5_ED5_NAF5),
+ GPIO_FN(D6_ED6_NAF6),
+ GPIO_FN(D7_ED7_NAF7),
+ GPIO_FN(D8_ED8_NAF8),
+ GPIO_FN(D9_ED9_NAF9),
+ GPIO_FN(D10_ED10_NAF10),
+ GPIO_FN(D11_ED11_NAF11),
+ GPIO_FN(D12_ED12_NAF12),
+ GPIO_FN(D13_ED13_NAF13),
+ GPIO_FN(D14_ED14_NAF14),
+ GPIO_FN(D15_ED15_NAF15),
+ GPIO_FN(CS4),
+ GPIO_FN(CS5A), GPIO_FN(FMSICK),
+
+ /* 55-3 (FN) */
+ GPIO_FN(CS5B), GPIO_FN(FCE1),
+ GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0),
+ GPIO_FN(FCE0),
+ GPIO_FN(WAIT), GPIO_FN(DREQ0),
+ GPIO_FN(RD_XRD),
+ GPIO_FN(WE0_XWR0_FWE),
+ GPIO_FN(WE1_XWR1),
+ GPIO_FN(FRB),
+ GPIO_FN(CKO),
+ GPIO_FN(NBRSTOUT),
+ GPIO_FN(NBRST),
+ GPIO_FN(GPS_EPPSIN),
+ GPIO_FN(LATCHPULSE),
+ GPIO_FN(LTESIGNAL),
+ GPIO_FN(LEGACYSTATE),
+ GPIO_FN(TCKON),
+ GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0),
+ GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1),
+ GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD),
+ GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1),
+ GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2),
+ GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5),
+ GPIO_FN(PORT133_MSIOF2_TSYNC),
+ GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD),
+ GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK),
+ GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2),
+ GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3),
+ GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC),
+ GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR),
+ GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2),
+ GPIO_FN(PORT140_FSIAOBT),
+ GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3),
+ GPIO_FN(PORT141_FSIAOSLD),
+ GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK),
+ GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR),
+ GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT),
+ GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD),
+ GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2),
+ GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5),
+ GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6),
+ GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1),
+ GPIO_FN(MFG0_IN2),
+ GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK),
+ GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC),
+ GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1),
+ GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0),
+ GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1),
+ GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2),
+ GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD),
+
+ /* 55-4 (FN) */
+ GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+ GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI),
+ GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0),
+ GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0),
+ GPIO_FN(MFG3_IN2),
+ GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0),
+ GPIO_FN(MFG3_IN1),
+ GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0),
+ GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0),
+ GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI),
+ GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS),
+ GPIO_FN(BBIF2_TSYNC1),
+ GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS),
+ GPIO_FN(BBIF2_TSCK1),
+ GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD),
+ GPIO_FN(BBIF2_TXD1),
+ GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD),
+ GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK),
+ GPIO_FN(MFG2_OUT2),
+ GPIO_FN(LCDD6),
+ GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2),
+ GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0),
+ GPIO_FN(D16),
+ GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1),
+ GPIO_FN(D17),
+ GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2),
+ GPIO_FN(D18),
+ GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3),
+ GPIO_FN(D19),
+ GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4),
+ GPIO_FN(D20),
+ GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5),
+ GPIO_FN(D21),
+ GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6),
+ GPIO_FN(D22),
+ GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0),
+ GPIO_FN(VIO_DR7), GPIO_FN(D23),
+ GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1),
+ GPIO_FN(VIO_VDR), GPIO_FN(D24),
+ GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR),
+ GPIO_FN(D25),
+ GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1),
+ GPIO_FN(D26),
+ GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27),
+ GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+ GPIO_FN(D28),
+ GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+ GPIO_FN(D29),
+ GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK),
+ GPIO_FN(D30),
+ GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC),
+ GPIO_FN(D31),
+ GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3),
+ GPIO_FN(VIO_CLKR),
+ GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC),
+ GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+ GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4),
+ GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK),
+ GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5),
+ GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD),
+ GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN),
+ GPIO_FN(MSIOF0L_TXD),
+ GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2),
+ GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM),
+ GPIO_FN(PORT226_VIO_CKO2),
+ GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN),
+ GPIO_FN(SCIFA1_RXD),
+ GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1),
+ GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC),
+ GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR),
+ GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT),
+ GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG),
+ GPIO_FN(PORT233_FSIACK),
+ GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD),
+ GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2),
+ GPIO_FN(PORT235_FSIAILR),
+ GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT),
+ GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD),
+ GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+
+ /* 55-5 (FN) */
+ GPIO_FN(MSIOF1_SS2),
+ GPIO_FN(SCIFA6_TXD),
+ GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1),
+ GPIO_FN(TPU4TO0),
+ GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2),
+ GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2),
+ GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1),
+ GPIO_FN(PORT244_SCIFB_CTS),
+ GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2),
+ GPIO_FN(PORT245_SCIFB_RTS),
+ GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1),
+ GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0),
+ GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2),
+ GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1),
+ GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1),
+ GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0),
+ GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1),
+ GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0),
+ GPIO_FN(SDHICD0),
+ GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0),
+ GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0),
+ GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+ GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0),
+ GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+ GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+ GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1),
+ GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2),
+ GPIO_FN(TMS3_SWDIO_MC1),
+ GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2),
+ GPIO_FN(TDO3_SWO0_MC1),
+ GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2),
+ GPIO_FN(TDI3),
+ GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2),
+ GPIO_FN(RTCK3_SWO1_MC1),
+ GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+ GPIO_FN(RESETOUTS),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out) \
+ 0, (out), (in), 0, \
+ 0, 0, 0, 0, \
+ 0, 0, (in_pd), 0, \
+ 0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+ { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+ PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
+ PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ PORT##nr##_FN0, PORT##nr##_FN1, \
+ PORT##nr##_FN2, PORT##nr##_FN3, \
+ PORT##nr##_FN4, PORT##nr##_FN5, \
+ PORT##nr##_FN6, PORT##nr##_FN7 } \
+ }
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ PORTCR(0, 0xe6050000), /* PORT0CR */
+ PORTCR(1, 0xe6050001), /* PORT1CR */
+ PORTCR(2, 0xe6050002), /* PORT2CR */
+ PORTCR(3, 0xe6050003), /* PORT3CR */
+ PORTCR(4, 0xe6050004), /* PORT4CR */
+ PORTCR(5, 0xe6050005), /* PORT5CR */
+ PORTCR(6, 0xe6050006), /* PORT6CR */
+ PORTCR(7, 0xe6050007), /* PORT7CR */
+ PORTCR(8, 0xe6050008), /* PORT8CR */
+ PORTCR(9, 0xe6050009), /* PORT9CR */
+
+ PORTCR(10, 0xe605000a), /* PORT10CR */
+ PORTCR(11, 0xe605000b), /* PORT11CR */
+ PORTCR(12, 0xe605000c), /* PORT12CR */
+ PORTCR(13, 0xe605000d), /* PORT13CR */
+ PORTCR(14, 0xe605000e), /* PORT14CR */
+ PORTCR(15, 0xe605000f), /* PORT15CR */
+ PORTCR(16, 0xe6050010), /* PORT16CR */
+ PORTCR(17, 0xe6050011), /* PORT17CR */
+ PORTCR(18, 0xe6050012), /* PORT18CR */
+ PORTCR(19, 0xe6050013), /* PORT19CR */
+
+ PORTCR(20, 0xe6050014), /* PORT20CR */
+ PORTCR(21, 0xe6050015), /* PORT21CR */
+ PORTCR(22, 0xe6050016), /* PORT22CR */
+ PORTCR(23, 0xe6050017), /* PORT23CR */
+ PORTCR(24, 0xe6050018), /* PORT24CR */
+ PORTCR(25, 0xe6050019), /* PORT25CR */
+ PORTCR(26, 0xe605001a), /* PORT26CR */
+ PORTCR(27, 0xe605001b), /* PORT27CR */
+ PORTCR(28, 0xe605001c), /* PORT28CR */
+ PORTCR(29, 0xe605001d), /* PORT29CR */
+
+ PORTCR(30, 0xe605001e), /* PORT30CR */
+ PORTCR(31, 0xe605001f), /* PORT31CR */
+ PORTCR(32, 0xe6050020), /* PORT32CR */
+ PORTCR(33, 0xe6050021), /* PORT33CR */
+ PORTCR(34, 0xe6050022), /* PORT34CR */
+ PORTCR(35, 0xe6050023), /* PORT35CR */
+ PORTCR(36, 0xe6050024), /* PORT36CR */
+ PORTCR(37, 0xe6050025), /* PORT37CR */
+ PORTCR(38, 0xe6050026), /* PORT38CR */
+ PORTCR(39, 0xe6050027), /* PORT39CR */
+
+ PORTCR(40, 0xe6050028), /* PORT40CR */
+ PORTCR(41, 0xe6050029), /* PORT41CR */
+ PORTCR(42, 0xe605002a), /* PORT42CR */
+ PORTCR(43, 0xe605002b), /* PORT43CR */
+ PORTCR(44, 0xe605002c), /* PORT44CR */
+ PORTCR(45, 0xe605002d), /* PORT45CR */
+ PORTCR(46, 0xe605002e), /* PORT46CR */
+ PORTCR(47, 0xe605002f), /* PORT47CR */
+ PORTCR(48, 0xe6050030), /* PORT48CR */
+ PORTCR(49, 0xe6050031), /* PORT49CR */
+
+ PORTCR(50, 0xe6050032), /* PORT50CR */
+ PORTCR(51, 0xe6050033), /* PORT51CR */
+ PORTCR(52, 0xe6050034), /* PORT52CR */
+ PORTCR(53, 0xe6050035), /* PORT53CR */
+ PORTCR(54, 0xe6050036), /* PORT54CR */
+ PORTCR(55, 0xe6050037), /* PORT55CR */
+ PORTCR(56, 0xe6050038), /* PORT56CR */
+ PORTCR(57, 0xe6050039), /* PORT57CR */
+ PORTCR(58, 0xe605003a), /* PORT58CR */
+ PORTCR(59, 0xe605003b), /* PORT59CR */
+
+ PORTCR(60, 0xe605003c), /* PORT60CR */
+ PORTCR(61, 0xe605003d), /* PORT61CR */
+ PORTCR(62, 0xe605003e), /* PORT62CR */
+ PORTCR(63, 0xe605003f), /* PORT63CR */
+ PORTCR(64, 0xe6050040), /* PORT64CR */
+ PORTCR(65, 0xe6050041), /* PORT65CR */
+ PORTCR(66, 0xe6050042), /* PORT66CR */
+ PORTCR(67, 0xe6050043), /* PORT67CR */
+ PORTCR(68, 0xe6050044), /* PORT68CR */
+ PORTCR(69, 0xe6050045), /* PORT69CR */
+
+ PORTCR(70, 0xe6050046), /* PORT70CR */
+ PORTCR(71, 0xe6050047), /* PORT71CR */
+ PORTCR(72, 0xe6050048), /* PORT72CR */
+ PORTCR(73, 0xe6050049), /* PORT73CR */
+ PORTCR(74, 0xe605004a), /* PORT74CR */
+ PORTCR(75, 0xe605004b), /* PORT75CR */
+ PORTCR(76, 0xe605004c), /* PORT76CR */
+ PORTCR(77, 0xe605004d), /* PORT77CR */
+ PORTCR(78, 0xe605004e), /* PORT78CR */
+ PORTCR(79, 0xe605004f), /* PORT79CR */
+
+ PORTCR(80, 0xe6050050), /* PORT80CR */
+ PORTCR(81, 0xe6050051), /* PORT81CR */
+ PORTCR(82, 0xe6050052), /* PORT82CR */
+ PORTCR(83, 0xe6050053), /* PORT83CR */
+ PORTCR(84, 0xe6050054), /* PORT84CR */
+ PORTCR(85, 0xe6050055), /* PORT85CR */
+ PORTCR(86, 0xe6050056), /* PORT86CR */
+ PORTCR(87, 0xe6050057), /* PORT87CR */
+ PORTCR(88, 0xe6050058), /* PORT88CR */
+ PORTCR(89, 0xe6050059), /* PORT89CR */
+
+ PORTCR(90, 0xe605005a), /* PORT90CR */
+ PORTCR(91, 0xe605005b), /* PORT91CR */
+ PORTCR(92, 0xe605005c), /* PORT92CR */
+ PORTCR(93, 0xe605005d), /* PORT93CR */
+ PORTCR(94, 0xe605005e), /* PORT94CR */
+ PORTCR(95, 0xe605005f), /* PORT95CR */
+ PORTCR(96, 0xe6050060), /* PORT96CR */
+ PORTCR(97, 0xe6050061), /* PORT97CR */
+ PORTCR(98, 0xe6050062), /* PORT98CR */
+ PORTCR(99, 0xe6050063), /* PORT99CR */
+
+ PORTCR(100, 0xe6050064), /* PORT100CR */
+ PORTCR(101, 0xe6050065), /* PORT101CR */
+ PORTCR(102, 0xe6050066), /* PORT102CR */
+ PORTCR(103, 0xe6050067), /* PORT103CR */
+ PORTCR(104, 0xe6050068), /* PORT104CR */
+ PORTCR(105, 0xe6050069), /* PORT105CR */
+ PORTCR(106, 0xe605006a), /* PORT106CR */
+ PORTCR(107, 0xe605006b), /* PORT107CR */
+ PORTCR(108, 0xe605006c), /* PORT108CR */
+ PORTCR(109, 0xe605006d), /* PORT109CR */
+
+ PORTCR(110, 0xe605006e), /* PORT110CR */
+ PORTCR(111, 0xe605006f), /* PORT111CR */
+ PORTCR(112, 0xe6050070), /* PORT112CR */
+ PORTCR(113, 0xe6050071), /* PORT113CR */
+ PORTCR(114, 0xe6050072), /* PORT114CR */
+ PORTCR(115, 0xe6050073), /* PORT115CR */
+ PORTCR(116, 0xe6050074), /* PORT116CR */
+ PORTCR(117, 0xe6050075), /* PORT117CR */
+ PORTCR(118, 0xe6050076), /* PORT118CR */
+
+ PORTCR(128, 0xe6051080), /* PORT128CR */
+ PORTCR(129, 0xe6051081), /* PORT129CR */
+
+ PORTCR(130, 0xe6051082), /* PORT130CR */
+ PORTCR(131, 0xe6051083), /* PORT131CR */
+ PORTCR(132, 0xe6051084), /* PORT132CR */
+ PORTCR(133, 0xe6051085), /* PORT133CR */
+ PORTCR(134, 0xe6051086), /* PORT134CR */
+ PORTCR(135, 0xe6051087), /* PORT135CR */
+ PORTCR(136, 0xe6051088), /* PORT136CR */
+ PORTCR(137, 0xe6051089), /* PORT137CR */
+ PORTCR(138, 0xe605108a), /* PORT138CR */
+ PORTCR(139, 0xe605108b), /* PORT139CR */
+
+ PORTCR(140, 0xe605108c), /* PORT140CR */
+ PORTCR(141, 0xe605108d), /* PORT141CR */
+ PORTCR(142, 0xe605108e), /* PORT142CR */
+ PORTCR(143, 0xe605108f), /* PORT143CR */
+ PORTCR(144, 0xe6051090), /* PORT144CR */
+ PORTCR(145, 0xe6051091), /* PORT145CR */
+ PORTCR(146, 0xe6051092), /* PORT146CR */
+ PORTCR(147, 0xe6051093), /* PORT147CR */
+ PORTCR(148, 0xe6051094), /* PORT148CR */
+ PORTCR(149, 0xe6051095), /* PORT149CR */
+
+ PORTCR(150, 0xe6051096), /* PORT150CR */
+ PORTCR(151, 0xe6051097), /* PORT151CR */
+ PORTCR(152, 0xe6051098), /* PORT152CR */
+ PORTCR(153, 0xe6051099), /* PORT153CR */
+ PORTCR(154, 0xe605109a), /* PORT154CR */
+ PORTCR(155, 0xe605109b), /* PORT155CR */
+ PORTCR(156, 0xe605109c), /* PORT156CR */
+ PORTCR(157, 0xe605109d), /* PORT157CR */
+ PORTCR(158, 0xe605109e), /* PORT158CR */
+ PORTCR(159, 0xe605109f), /* PORT159CR */
+
+ PORTCR(160, 0xe60510a0), /* PORT160CR */
+ PORTCR(161, 0xe60510a1), /* PORT161CR */
+ PORTCR(162, 0xe60510a2), /* PORT162CR */
+ PORTCR(163, 0xe60510a3), /* PORT163CR */
+ PORTCR(164, 0xe60510a4), /* PORT164CR */
+
+ PORTCR(192, 0xe60520c0), /* PORT192CR */
+ PORTCR(193, 0xe60520c1), /* PORT193CR */
+ PORTCR(194, 0xe60520c2), /* PORT194CR */
+ PORTCR(195, 0xe60520c3), /* PORT195CR */
+ PORTCR(196, 0xe60520c4), /* PORT196CR */
+ PORTCR(197, 0xe60520c5), /* PORT197CR */
+ PORTCR(198, 0xe60520c6), /* PORT198CR */
+ PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+ PORTCR(200, 0xe60520c8), /* PORT200CR */
+ PORTCR(201, 0xe60520c9), /* PORT201CR */
+ PORTCR(202, 0xe60520ca), /* PORT202CR */
+ PORTCR(203, 0xe60520cb), /* PORT203CR */
+ PORTCR(204, 0xe60520cc), /* PORT204CR */
+ PORTCR(205, 0xe60520cd), /* PORT205CR */
+ PORTCR(206, 0xe60520ce), /* PORT206CR */
+ PORTCR(207, 0xe60520cf), /* PORT207CR */
+ PORTCR(208, 0xe60520d0), /* PORT208CR */
+ PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+ PORTCR(210, 0xe60520d2), /* PORT210CR */
+ PORTCR(211, 0xe60520d3), /* PORT211CR */
+ PORTCR(212, 0xe60520d4), /* PORT212CR */
+ PORTCR(213, 0xe60520d5), /* PORT213CR */
+ PORTCR(214, 0xe60520d6), /* PORT214CR */
+ PORTCR(215, 0xe60520d7), /* PORT215CR */
+ PORTCR(216, 0xe60520d8), /* PORT216CR */
+ PORTCR(217, 0xe60520d9), /* PORT217CR */
+ PORTCR(218, 0xe60520da), /* PORT218CR */
+ PORTCR(219, 0xe60520db), /* PORT219CR */
+
+ PORTCR(220, 0xe60520dc), /* PORT220CR */
+ PORTCR(221, 0xe60520dd), /* PORT221CR */
+ PORTCR(222, 0xe60520de), /* PORT222CR */
+ PORTCR(223, 0xe60520df), /* PORT223CR */
+ PORTCR(224, 0xe60520e0), /* PORT224CR */
+ PORTCR(225, 0xe60520e1), /* PORT225CR */
+ PORTCR(226, 0xe60520e2), /* PORT226CR */
+ PORTCR(227, 0xe60520e3), /* PORT227CR */
+ PORTCR(228, 0xe60520e4), /* PORT228CR */
+ PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+ PORTCR(230, 0xe60520e6), /* PORT230CR */
+ PORTCR(231, 0xe60520e7), /* PORT231CR */
+ PORTCR(232, 0xe60520e8), /* PORT232CR */
+ PORTCR(233, 0xe60520e9), /* PORT233CR */
+ PORTCR(234, 0xe60520ea), /* PORT234CR */
+ PORTCR(235, 0xe60520eb), /* PORT235CR */
+ PORTCR(236, 0xe60520ec), /* PORT236CR */
+ PORTCR(237, 0xe60520ed), /* PORT237CR */
+ PORTCR(238, 0xe60520ee), /* PORT238CR */
+ PORTCR(239, 0xe60520ef), /* PORT239CR */
+
+ PORTCR(240, 0xe60520f0), /* PORT240CR */
+ PORTCR(241, 0xe60520f1), /* PORT241CR */
+ PORTCR(242, 0xe60520f2), /* PORT242CR */
+ PORTCR(243, 0xe60520f3), /* PORT243CR */
+ PORTCR(244, 0xe60520f4), /* PORT244CR */
+ PORTCR(245, 0xe60520f5), /* PORT245CR */
+ PORTCR(246, 0xe60520f6), /* PORT246CR */
+ PORTCR(247, 0xe60520f7), /* PORT247CR */
+ PORTCR(248, 0xe60520f8), /* PORT248CR */
+ PORTCR(249, 0xe60520f9), /* PORT249CR */
+
+ PORTCR(250, 0xe60520fa), /* PORT250CR */
+ PORTCR(251, 0xe60520fb), /* PORT251CR */
+ PORTCR(252, 0xe60520fc), /* PORT252CR */
+ PORTCR(253, 0xe60520fd), /* PORT253CR */
+ PORTCR(254, 0xe60520fe), /* PORT254CR */
+ PORTCR(255, 0xe60520ff), /* PORT255CR */
+ PORTCR(256, 0xe6052100), /* PORT256CR */
+ PORTCR(257, 0xe6052101), /* PORT257CR */
+ PORTCR(258, 0xe6052102), /* PORT258CR */
+ PORTCR(259, 0xe6052103), /* PORT259CR */
+
+ PORTCR(260, 0xe6052104), /* PORT260CR */
+ PORTCR(261, 0xe6052105), /* PORT261CR */
+ PORTCR(262, 0xe6052106), /* PORT262CR */
+ PORTCR(263, 0xe6052107), /* PORT263CR */
+ PORTCR(264, 0xe6052108), /* PORT264CR */
+
+ { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ MSELBCR_MSEL17_0, MSELBCR_MSEL17_1,
+ MSELBCR_MSEL16_0, MSELBCR_MSEL16_1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+ PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+ PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+ PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+ PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+ PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+ PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+ PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+ PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+ PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+ PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+ PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+ PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+ PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+ PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+ PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+ PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+ PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+ PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+ PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+ PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+ PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+ PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+ PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+ PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+ PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+ PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+ PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+ PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+ PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) {
+ PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+ PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+ PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+ PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+ PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+ PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+ PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+ PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, PORT164_DATA,
+ PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) {
+ PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+ PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+ PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+ PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+ PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+ PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+ PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+ PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) {
+ PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+ PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+ PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+ PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+ PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+ PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+ PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+ PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, PORT264_DATA,
+ PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+ PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+ },
+ { },
+};
+
+static struct pinmux_info sh7377_pinmux_info = {
+ .name = "sh7377_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PORT0,
+ .last_gpio = GPIO_FN_RESETOUTS,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7377_pinmux_init(void)
+{
+ register_pinmux(&sh7377_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
new file mode 100644
index 0000000..eca9071
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -0,0 +1,198 @@
+/*
+ * sh7367 processor support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+ .mapbase = 0xe6c40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .dev = {
+ .platform_data = &scif0_platform_data,
+ },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+ .mapbase = 0xe6c50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .dev = {
+ .platform_data = &scif1_platform_data,
+ },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+ .mapbase = 0xe6c60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .dev = {
+ .platform_data = &scif2_platform_data,
+ },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+ .mapbase = 0xe6c70000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+ .name = "sh-sci",
+ .id = 3,
+ .dev = {
+ .platform_data = &scif3_platform_data,
+ },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+ .mapbase = 0xe6c80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+ .name = "sh-sci",
+ .id = 4,
+ .dev = {
+ .platform_data = &scif4_platform_data,
+ },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+ .mapbase = 0xe6cb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+ .name = "sh-sci",
+ .id = 5,
+ .dev = {
+ .platform_data = &scif5_platform_data,
+ },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+ .mapbase = 0xe6c30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+ .name = "sh-sci",
+ .id = 6,
+ .dev = {
+ .platform_data = &scif6_platform_data,
+ },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clk = "r_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+ [0] = {
+ .name = "CMT10",
+ .start = 0xe6138010,
+ .end = 0xe613801b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 72,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt10_device = {
+ .name = "sh_cmt",
+ .id = 10,
+ .dev = {
+ .platform_data = &cmt10_platform_data,
+ },
+ .resource = cmt10_resources,
+ .num_resources = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7367_early_devices[] __initdata = {
+ &scif0_device,
+ &scif1_device,
+ &scif2_device,
+ &scif3_device,
+ &scif4_device,
+ &scif5_device,
+ &scif6_device,
+ &cmt10_device,
+};
+
+void __init sh7367_add_standard_devices(void)
+{
+ platform_add_devices(sh7367_early_devices,
+ ARRAY_SIZE(sh7367_early_devices));
+}
+
+#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2_CMT1 (1 << 29)
+
+void __init sh7367_add_early_devices(void)
+{
+ /* enable clock to CMT1 */
+ __raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2);
+
+ early_platform_add_devices(sh7367_early_devices,
+ ARRAY_SIZE(sh7367_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
new file mode 100644
index 0000000..1d11532
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -0,0 +1,199 @@
+/*
+ * sh7372 processor support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+ .mapbase = 0xe6c40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .dev = {
+ .platform_data = &scif0_platform_data,
+ },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+ .mapbase = 0xe6c50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .dev = {
+ .platform_data = &scif1_platform_data,
+ },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+ .mapbase = 0xe6c60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .dev = {
+ .platform_data = &scif2_platform_data,
+ },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+ .mapbase = 0xe6c70000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+ .name = "sh-sci",
+ .id = 3,
+ .dev = {
+ .platform_data = &scif3_platform_data,
+ },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+ .mapbase = 0xe6c80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+ .name = "sh-sci",
+ .id = 4,
+ .dev = {
+ .platform_data = &scif4_platform_data,
+ },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+ .mapbase = 0xe6cb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+ .name = "sh-sci",
+ .id = 5,
+ .dev = {
+ .platform_data = &scif5_platform_data,
+ },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+ .mapbase = 0xe6c30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+ .name = "sh-sci",
+ .id = 6,
+ .dev = {
+ .platform_data = &scif6_platform_data,
+ },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clk = "r_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+ [0] = {
+ .name = "CMT10",
+ .start = 0xe6138010,
+ .end = 0xe613801b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 72,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt10_device = {
+ .name = "sh_cmt",
+ .id = 10,
+ .dev = {
+ .platform_data = &cmt10_platform_data,
+ },
+ .resource = cmt10_resources,
+ .num_resources = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7372_early_devices[] __initdata = {
+ &scif0_device,
+ &scif1_device,
+ &scif2_device,
+ &scif3_device,
+ &scif4_device,
+ &scif5_device,
+ &scif6_device,
+ &cmt10_device,
+};
+
+void __init sh7372_add_standard_devices(void)
+{
+ platform_add_devices(sh7372_early_devices,
+ ARRAY_SIZE(sh7372_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7372_add_early_devices(void)
+{
+ /* enable clock to CMT1 */
+ __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+ early_platform_add_devices(sh7372_early_devices,
+ ARRAY_SIZE(sh7372_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
new file mode 100644
index 0000000..60e3777
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -0,0 +1,215 @@
+/*
+ * sh7377 processor support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+ .mapbase = 0xe6c40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .dev = {
+ .platform_data = &scif0_platform_data,
+ },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+ .mapbase = 0xe6c50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .dev = {
+ .platform_data = &scif1_platform_data,
+ },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+ .mapbase = 0xe6c60000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .dev = {
+ .platform_data = &scif2_platform_data,
+ },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+ .mapbase = 0xe6c70000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+ .name = "sh-sci",
+ .id = 3,
+ .dev = {
+ .platform_data = &scif3_platform_data,
+ },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+ .mapbase = 0xe6c80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+ .name = "sh-sci",
+ .id = 4,
+ .dev = {
+ .platform_data = &scif4_platform_data,
+ },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+ .mapbase = 0xe6cb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+ .name = "sh-sci",
+ .id = 5,
+ .dev = {
+ .platform_data = &scif5_platform_data,
+ },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+ .mapbase = 0xe6cc0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 196, 196, 196, 196 },
+};
+
+static struct platform_device scif6_device = {
+ .name = "sh-sci",
+ .id = 6,
+ .dev = {
+ .platform_data = &scif6_platform_data,
+ },
+};
+
+static struct plat_sci_port scif7_platform_data = {
+ .mapbase = 0xe6c30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif7_device = {
+ .name = "sh-sci",
+ .id = 7,
+ .dev = {
+ .platform_data = &scif7_platform_data,
+ },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+ .name = "CMT10",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clk = "r_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+ [0] = {
+ .name = "CMT10",
+ .start = 0xe6138010,
+ .end = 0xe613801b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 72,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt10_device = {
+ .name = "sh_cmt",
+ .id = 10,
+ .dev = {
+ .platform_data = &cmt10_platform_data,
+ },
+ .resource = cmt10_resources,
+ .num_resources = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7377_early_devices[] __initdata = {
+ &scif0_device,
+ &scif1_device,
+ &scif2_device,
+ &scif3_device,
+ &scif4_device,
+ &scif5_device,
+ &scif6_device,
+ &scif7_device,
+ &cmt10_device,
+};
+
+void __init sh7377_add_standard_devices(void)
+{
+ platform_add_devices(sh7377_early_devices,
+ ARRAY_SIZE(sh7377_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7377_add_early_devices(void)
+{
+ /* enable clock to CMT1 */
+ __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+ early_platform_add_devices(sh7377_early_devices,
+ ARRAY_SIZE(sh7377_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
new file mode 100644
index 0000000..895794b
--- /dev/null
+++ b/arch/arm/mach-shmobile/timer.c
@@ -0,0 +1,46 @@
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2002 - 2009 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/mach/time.h>
+
+static void __init shmobile_late_time_init(void)
+{
+ /*
+ * Make sure all compiled-in early timers register themselves.
+ *
+ * Run probe() for two "earlytimer" devices, these will be the
+ * clockevents and clocksource devices respectively. In the event
+ * that only a clockevents device is available, we -ENODEV on the
+ * clocksource and the jiffies clocksource is used transparently
+ * instead. No error handling is necessary here.
+ */
+ early_platform_driver_register_all("earlytimer");
+ early_platform_driver_probe("earlytimer", 2, 0);
+}
+
+static void __init shmobile_timer_init(void)
+{
+ late_time_init = shmobile_late_time_init;
+}
+
+struct sys_timer shmobile_timer = {
+ .init = shmobile_timer_init,
+};
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6da6502..04ea836 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -68,12 +68,12 @@
#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
/* per5 base addressess */
#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000)
+#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
/* per4 base addressess */
#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
@@ -95,7 +95,7 @@
#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000)
+#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
/* per2 base addressess */
#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
@@ -123,7 +123,7 @@
#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000)
+#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
/* ST-Ericsson modified pl022 id */
#define SSP_PER_ID 0x01080022
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8b0a1ee..7f7ad6f 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,38 +9,43 @@
config ARCH_MX1
bool "MX1-based"
select CPU_ARM920T
- select COMMON_CLKDEV
+ select IMX_HAVE_IOMUX_V1
help
This enables support for systems based on the Freescale i.MX1 family
config ARCH_MX2
bool "MX2-based"
select CPU_ARM926T
- select COMMON_CLKDEV
+ select IMX_HAVE_IOMUX_V1
help
This enables support for systems based on the Freescale i.MX2 family
config ARCH_MX25
bool "MX25-based"
select CPU_ARM926T
- select COMMON_CLKDEV
+ select ARCH_MXC_IOMUX_V3
+ select HAVE_FB_IMX
help
This enables support for systems based on the Freescale i.MX25 family
config ARCH_MX3
bool "MX3-based"
select CPU_V6
- select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX3 family
config ARCH_MXC91231
bool "MXC91231-based"
select CPU_V6
- select COMMON_CLKDEV
help
This enables support for systems based on the Freescale MXC91231 family
+config ARCH_MX5
+ bool "MX5-based"
+ select CPU_V7
+ help
+ This enables support for systems based on the Freescale i.MX51 family
+
endchoice
source "arch/arm/mach-mx1/Kconfig"
@@ -48,12 +53,12 @@
source "arch/arm/mach-mx3/Kconfig"
source "arch/arm/mach-mx25/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
+source "arch/arm/mach-mx5/Kconfig"
endmenu
config MXC_IRQ_PRIOR
bool "Use IRQ priority"
- depends on ARCH_MXC
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
@@ -62,9 +67,16 @@
requirements for timing.
Say N here, unless you have a specialized requirement.
+config MXC_TZIC
+ bool "Enable TrustZone Interrupt Controller"
+ depends on ARCH_MX51
+ help
+ This will be automatically selected for all processors
+ containing this interrupt controller.
+ Say N here only if you are really sure.
+
config MXC_PWM
tristate "Enable PWM driver"
- depends on ARCH_MXC
select HAVE_PWM
help
Enable support for the i.MX PWM controller(s).
@@ -74,7 +86,9 @@
config ARCH_HAS_RNGA
bool
- depends on ARCH_MXC
+
+config IMX_HAVE_IOMUX_V1
+ bool
config ARCH_MXC_IOMUX_V3
bool
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6cee38d..895bc3c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,8 +5,12 @@
# Common support
obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
-obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+
+obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index da6387d..b62917c 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -50,8 +50,18 @@
static int mxc_audmux_v1_init(void)
{
- if (cpu_is_mx27() || cpu_is_mx21())
- audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+#ifdef CONFIG_MACH_MX21
+ if (cpu_is_mx21())
+ audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+ else
+#endif
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27())
+ audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
+ else
+#endif
+ (void)0;
+
return 0;
}
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index b06954a..d983cd6 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -190,7 +190,10 @@
{
int ret;
- if (cpu_is_mx35()) {
+ if (cpu_is_mx31())
+ audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
+
+ else if (cpu_is_mx35()) {
audmux_clk = clk_get(NULL, "audmux");
if (IS_ERR(audmux_clk)) {
ret = PTR_ERR(audmux_clk);
@@ -198,11 +201,9 @@
ret);
return ret;
}
+ audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
}
- if (cpu_is_mx31() || cpu_is_mx35())
- audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
-
audmux_debugfs_init();
return 0;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 9e8fbd5..323ff8c 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -56,6 +56,7 @@
__clk_disable(clk->parent);
__clk_disable(clk->secondary);
+ WARN_ON(!clk->usecount);
if (!(--clk->usecount) && clk->disable)
clk->disable(clk);
}
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 9c1b3f9..e16014b 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -128,6 +128,18 @@
int hw_chaining;
};
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+ __raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+ return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
static struct clk *dma_clk;
@@ -140,7 +152,6 @@
return 0;
}
-
/*
* imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
*/
@@ -160,17 +171,17 @@
imxdma->resbytes -= now;
if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
- __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+ imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
else
- __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+ imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
- __raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+ imx_dmav1_writel(now, DMA_CNTR(channel));
pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
"size 0x%08x\n", channel,
- __raw_readl(DMA_BASE + DMA_DAR(channel)),
- __raw_readl(DMA_BASE + DMA_SAR(channel)),
- __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+ imx_dmav1_readl(DMA_DAR(channel)),
+ imx_dmav1_readl(DMA_SAR(channel)),
+ imx_dmav1_readl(DMA_CNTR(channel)));
return now;
}
@@ -218,27 +229,26 @@
channel, __func__, (unsigned int)dma_address,
dma_length, dev_addr);
- __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
- __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
- __raw_writel(imxdma->ccr_from_device,
- DMA_BASE + DMA_CCR(channel));
+ imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+ imx_dmav1_writel(dma_address, DMA_DAR(channel));
+ imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
"dev_addr=0x%08x for write\n",
channel, __func__, (unsigned int)dma_address,
dma_length, dev_addr);
- __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
- __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
- __raw_writel(imxdma->ccr_to_device,
- DMA_BASE + DMA_CCR(channel));
+ imx_dmav1_writel(dma_address, DMA_SAR(channel));
+ imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+ imx_dmav1_writel(imxdma->ccr_to_device,
+ DMA_CCR(channel));
} else {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
channel);
return -EINVAL;
}
- __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+ imx_dmav1_writel(dma_length, DMA_CNTR(channel));
return 0;
}
@@ -316,17 +326,15 @@
"dev_addr=0x%08x for read\n",
channel, __func__, sg, sgcount, dma_length, dev_addr);
- __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
- __raw_writel(imxdma->ccr_from_device,
- DMA_BASE + DMA_CCR(channel));
+ imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+ imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
"dev_addr=0x%08x for write\n",
channel, __func__, sg, sgcount, dma_length, dev_addr);
- __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
- __raw_writel(imxdma->ccr_to_device,
- DMA_BASE + DMA_CCR(channel));
+ imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+ imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
} else {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
channel);
@@ -360,7 +368,7 @@
imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
- __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+ imx_dmav1_writel(dmareq, DMA_RSSR(channel));
return 0;
}
@@ -368,7 +376,7 @@
void imx_dma_config_burstlen(int channel, unsigned int burstlen)
{
- __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+ imx_dmav1_writel(burstlen, DMA_BLR(channel));
}
EXPORT_SYMBOL(imx_dma_config_burstlen);
@@ -398,7 +406,7 @@
}
local_irq_save(flags);
- __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+ imx_dmav1_writel(1 << channel, DMA_DISR);
imxdma->irq_handler = irq_handler;
imxdma->err_handler = err_handler;
imxdma->data = data;
@@ -462,22 +470,21 @@
local_irq_save(flags);
- __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
- CCR_ACRPT,
- DMA_BASE + DMA_CCR(channel));
+ imx_dmav1_writel(1 << channel, DMA_DISR);
+ imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+ imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+ CCR_ACRPT, DMA_CCR(channel));
#ifdef CONFIG_ARCH_MX2
- if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+ if ((cpu_is_mx21() || cpu_is_mx27()) &&
+ imxdma->sg && imx_dma_hw_chain(imxdma)) {
imxdma->sg = sg_next(imxdma->sg);
if (imxdma->sg) {
u32 tmp;
imx_dma_sg_next(channel, imxdma->sg);
- tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
- __raw_writel(tmp | CCR_RPT | CCR_ACRPT,
- DMA_BASE + DMA_CCR(channel));
+ tmp = imx_dmav1_readl(DMA_CCR(channel));
+ imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+ DMA_CCR(channel));
}
}
#endif
@@ -502,11 +509,10 @@
del_timer(&imxdma->watchdog);
local_irq_save(flags);
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
- DMA_BASE + DMA_CCR(channel));
- __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+ imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+ imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+ DMA_CCR(channel));
+ imx_dmav1_writel(1 << channel, DMA_DISR);
imxdma->in_use = 0;
local_irq_restore(flags);
}
@@ -517,7 +523,7 @@
{
struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
- __raw_writel(0, DMA_BASE + DMA_CCR(chno));
+ imx_dmav1_writel(0, DMA_CCR(chno));
imxdma->in_use = 0;
imxdma->sg = NULL;
@@ -533,17 +539,17 @@
unsigned int err_mask;
int errcode;
- disr = __raw_readl(DMA_BASE + DMA_DISR);
+ disr = imx_dmav1_readl(DMA_DISR);
- err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
- __raw_readl(DMA_BASE + DMA_DRTOSR) |
- __raw_readl(DMA_BASE + DMA_DSESR) |
- __raw_readl(DMA_BASE + DMA_DBOSR);
+ err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+ imx_dmav1_readl(DMA_DRTOSR) |
+ imx_dmav1_readl(DMA_DSESR) |
+ imx_dmav1_readl(DMA_DBOSR);
if (!err_mask)
return IRQ_HANDLED;
- __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+ imx_dmav1_writel(disr & err_mask, DMA_DISR);
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
if (!(err_mask & (1 << i)))
@@ -551,20 +557,20 @@
imxdma = &imx_dma_channels[i];
errcode = 0;
- if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
- __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+ if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+ imx_dmav1_writel(1 << i, DMA_DBTOSR);
errcode |= IMX_DMA_ERR_BURST;
}
- if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
- __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+ if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+ imx_dmav1_writel(1 << i, DMA_DRTOSR);
errcode |= IMX_DMA_ERR_REQUEST;
}
- if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
- __raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+ if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+ imx_dmav1_writel(1 << i, DMA_DSESR);
errcode |= IMX_DMA_ERR_TRANSFER;
}
- if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
- __raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+ if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+ imx_dmav1_writel(1 << i, DMA_DBOSR);
errcode |= IMX_DMA_ERR_BUFFER;
}
if (imxdma->name && imxdma->err_handler) {
@@ -607,7 +613,7 @@
if (imxdma->sg) {
imx_dma_sg_next(chno, imxdma->sg);
- tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+ tmp = imx_dmav1_readl(DMA_CCR(chno));
if (imx_dma_hw_chain(imxdma)) {
/* FIXME: The timeout should probably be
@@ -617,15 +623,13 @@
jiffies + msecs_to_jiffies(500));
tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
- __raw_writel(tmp, DMA_BASE +
- DMA_CCR(chno));
+ imx_dmav1_writel(tmp, DMA_CCR(chno));
} else {
- __raw_writel(tmp & ~CCR_CEN, DMA_BASE +
- DMA_CCR(chno));
+ imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
tmp |= CCR_CEN;
}
- __raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+ imx_dmav1_writel(tmp, DMA_CCR(chno));
if (imxdma->prog_handler)
imxdma->prog_handler(chno, imxdma->data,
@@ -640,7 +644,7 @@
}
}
- __raw_writel(0, DMA_BASE + DMA_CCR(chno));
+ imx_dmav1_writel(0, DMA_CCR(chno));
imxdma->in_use = 0;
if (imxdma->irq_handler)
imxdma->irq_handler(chno, imxdma->data);
@@ -651,15 +655,16 @@
int i, disr;
#ifdef CONFIG_ARCH_MX2
- dma_err_handler(irq, dev_id);
+ if (cpu_is_mx21() || cpu_is_mx27())
+ dma_err_handler(irq, dev_id);
#endif
- disr = __raw_readl(DMA_BASE + DMA_DISR);
+ disr = imx_dmav1_readl(DMA_DISR);
pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
disr);
- __raw_writel(disr, DMA_BASE + DMA_DISR);
+ imx_dmav1_writel(disr, DMA_DISR);
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
if (disr & (1 << i))
dma_irq_handle_channel(i);
@@ -699,17 +704,19 @@
local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
- ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
- NULL);
- if (ret) {
- imxdma->name = NULL;
- printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
- MXC_INT_DMACH0 + channel, channel);
- return ret;
+ if (cpu_is_mx21() || cpu_is_mx27()) {
+ ret = request_irq(MX2x_INT_DMACH0 + channel,
+ dma_irq_handler, 0, "DMA", NULL);
+ if (ret) {
+ imxdma->name = NULL;
+ pr_crit("Can't register IRQ %d for DMA channel %d\n",
+ MX2x_INT_DMACH0 + channel, channel);
+ return ret;
+ }
+ init_timer(&imxdma->watchdog);
+ imxdma->watchdog.function = &imx_dma_watchdog;
+ imxdma->watchdog.data = channel;
}
- init_timer(&imxdma->watchdog);
- imxdma->watchdog.function = &imx_dma_watchdog;
- imxdma->watchdog.data = channel;
#endif
return ret;
@@ -738,7 +745,8 @@
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
- free_irq(MXC_INT_DMACH0 + channel, NULL);
+ if (cpu_is_mx21() || cpu_is_mx27())
+ free_irq(MX2x_INT_DMACH0 + channel, NULL);
#endif
local_irq_restore(flags);
@@ -796,34 +804,53 @@
int ret = 0;
int i;
+#ifdef CONFIG_ARCH_MX1
+ if (cpu_is_mx1())
+ imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+ else
+#endif
+#ifdef CONFIG_MACH_MX21
+ if (cpu_is_mx21())
+ imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+ else
+#endif
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27())
+ imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+ else
+#endif
+ BUG();
+
dma_clk = clk_get(NULL, "dma");
clk_enable(dma_clk);
/* reset DMA module */
- __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+ imx_dmav1_writel(DCR_DRST, DMA_DCR);
#ifdef CONFIG_ARCH_MX1
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
- }
+ if (cpu_is_mx1()) {
+ ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+ if (ret) {
+ pr_crit("Wow! Can't register IRQ for DMA\n");
+ return ret;
+ }
- ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
- free_irq(DMA_INT, NULL);
- return ret;
+ ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+ if (ret) {
+ pr_crit("Wow! Can't register ERRIRQ for DMA\n");
+ free_irq(MX1_DMA_INT, NULL);
+ return ret;
+ }
}
#endif
/* enable DMA module */
- __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+ imx_dmav1_writel(DCR_DEN, DMA_DCR);
/* clear all interrupts */
- __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+ imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
/* disable interrupts */
- __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+ imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
imx_dma_channels[i].sg = NULL;
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 41599be..cb0b63874 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -25,25 +25,37 @@
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
-#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
-#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
-#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
+#define MX35_OTG_SIC_SHIFT 29
+#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT (1 << 24)
+
+#define MX35_H1_SIC_SHIFT 21
+#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT (1 << 8)
+#define MX35_H1_IPPUE_UP_BIT (1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX35_H1_TLL_BIT (1 << 5)
+#define MX35_H1_USBTE_BIT (1 << 4)
+
int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
-
+#ifdef CONFIG_ARCH_MX3
if (cpu_is_mx31()) {
- v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+ v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
@@ -51,15 +63,15 @@
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_OTG_SIC_SHIFT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
- v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+ v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H1_SIC_SHIFT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
@@ -67,7 +79,7 @@
break;
case 2: /* H2 port */
- v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+ v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
@@ -77,13 +89,103 @@
v |= MX31_H2_DT_BIT;
break;
+ default:
+ return -EINVAL;
}
- writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+ writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
+ if (cpu_is_mx35()) {
+ v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+ USBCTRL_OTGBASE_OFFSET));
+
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK)
+ << MX35_OTG_SIC_SHIFT;
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_OTG_PM_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+ MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK)
+ << MX35_H1_SIC_SHIFT;
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_H1_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX35_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX35_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX35_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX35_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+ USBCTRL_OTGBASE_OFFSET));
+ return 0;
+ }
+#endif /* CONFIG_ARCH_MX3 */
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27()) {
+ /* On i.MX27 we can use the i.MX31 USBCTRL bits, they
+ * are identical
+ */
+ v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+ USBCTRL_OTGBASE_OFFSET));
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK)
+ << MX31_OTG_SIC_SHIFT;
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_OTG_PM_BIT;
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK)
+ << MX31_H1_SIC_SHIFT;
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H1_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H1_DT_BIT;
+
+ break;
+ case 2: /* H2 port */
+ v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK)
+ << MX31_H2_SIC_SHIFT;
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H2_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H2_DT_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+ writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+ USBCTRL_OTGBASE_OFFSET));
+ return 0;
+ }
+#endif /* CONFIG_MACH_MX27 */
printk(KERN_WARNING
"%s() unable to setup USBCONTROL for this CPU\n", __func__);
return -EINVAL;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d65ebe3..70b2389 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -140,16 +140,13 @@
val = __raw_readl(reg);
edge = (val >> (bit << 1)) & 3;
val &= ~(0x3 << (bit << 1));
- switch (edge) {
- case GPIO_INT_HIGH_LEV:
+ if (edge == GPIO_INT_HIGH_LEV) {
edge = GPIO_INT_LOW_LEV;
pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
- break;
- case GPIO_INT_LOW_LEV:
+ } else if (edge == GPIO_INT_LOW_LEV) {
edge = GPIO_INT_HIGH_LEV;
pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
- break;
- default:
+ } else {
pr_err("mxc: invalid configuration for GPIO %d: %x\n",
gpio, edge);
return;
@@ -157,25 +154,20 @@
__raw_writel(val | (edge << (bit << 1)), reg);
}
-/* handle n interrupts in one status register */
+/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
- u32 gpio_irq_no;
+ u32 gpio_irq_no_base = port->virtual_irq_start;
- gpio_irq_no = port->virtual_irq_start;
- for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
- u32 gpio = irq_to_gpio(gpio_irq_no);
+ while (irq_stat != 0) {
+ int irqoffset = fls(irq_stat) - 1;
- if ((irq_stat & 1) == 0)
- continue;
+ if (port->both_edges & (1 << irqoffset))
+ mxc_flip_edge(port, irqoffset);
- BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+ generic_handle_irq(gpio_irq_no_base + irqoffset);
- if (port->both_edges & (1 << (gpio & 31)))
- mxc_flip_edge(port, gpio);
-
- irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
- &irq_desc[gpio_irq_no]);
+ irq_stat &= ~(1 << irqoffset);
}
}
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
index 05ff2f3..93cc66f 100644
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -21,19 +21,19 @@
/*
* KZM-ARM11-01 Board Control Registers on FPGA
*/
-#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
/*
* External UART for touch panel on FPGA
*/
-#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 2cbfa35..095a199 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
/* Offsets for the PBC Controller register */
/* PBC Board status register offset */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index d5be6b5..fc5fec9 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -25,6 +25,7 @@
MX31NOBOARD = 0,
MX31DEVBOARD = 1,
MX31MARXBOT = 2,
+ MX31SMARTBOT = 3,
};
/*
@@ -34,6 +35,7 @@
extern void mx31moboard_devboard_init(void);
extern void mx31moboard_marxbot_init(void);
+extern void mx31moboard_smartbot_init(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 43a82d0..753a598 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,13 +26,6 @@
struct module;
struct clk {
-#ifndef CONFIG_COMMON_CLKDEV
- /* As soon as i.MX1 and i.MX31 switched to clkdev, this
- * block can go away */
- struct list_head node;
- struct module *owner;
- const char *name;
-#endif
int id;
/* Source clock this clk depends on */
struct clk *parent;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4bf1068..2941472 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,14 +20,17 @@
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
+extern void mx51_map_io(void);
extern void mxc91231_map_io(void);
extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
extern void mx21_init_irq(void);
extern void mx25_init_irq(void);
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
extern void mxc91231_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -36,6 +39,8 @@
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2);
extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 5a6ae1b..0b6e11e 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*
*/
+#define IMX_NEEDS_DEPRECATED_SYMBOLS
#ifdef CONFIG_ARCH_MX1
#include <mach/mx1.h>
@@ -44,13 +45,22 @@
#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR MX51_UART1_BASE_ADDR
+#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
#ifdef CONFIG_ARCH_MXC91231
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#include <mach/mxc91231.h>
#define UART_PADDR MXC91231_UART2_BASE_ADDR
-#define UART_VADDR MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 7cf290e..aeb0869 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
@@ -18,11 +18,16 @@
.endm
.macro get_irqnr_preamble, base, tmp
+#ifndef CONFIG_MXC_TZIC
ldr \base, =avic_base
ldr \base, [\base]
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
+#elif defined CONFIG_MXC_TZIC
+ ldr \base, =tzic_base
+ ldr \base, [\base]
+#endif /* CONFIG_MXC_TZIC */
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -32,6 +37,7 @@
@ and returns its number in irqnr
@ and returns if an interrupt occured in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifndef CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending from AVIC_NIVECSR
ldr \irqstat, [\base, #0x40]
@@ -45,6 +51,32 @@
strne \tmp, [\base, #AVIC_NIMASK]
streq r4, [\base, #AVIC_NIMASK]
#endif
+#elif defined CONFIG_MXC_TZIC
+ @ Load offset & priority of the highest priority
+ @ interrupt pending.
+ @ 0xD80 is HIPND0 register
+ mov \irqnr, #0
+ mov \irqstat, #0x0D80
+1000:
+ ldr \tmp, [\irqstat, \base]
+ cmp \tmp, #0
+ bne 1001f
+ addeq \irqnr, \irqnr, #32
+ addeq \irqstat, \irqstat, #4
+ cmp \irqnr, #128
+ blo 1000b
+ b 2001f
+1001: mov \irqstat, #1
+1002: tst \tmp, \irqstat
+ bne 2002f
+ movs \tmp, \tmp, lsr #1
+ addne \irqnr, \irqnr, #1
+ bne 1002b
+2001:
+ mov \irqnr, #0
+2002:
+ movs \irqnr, \irqnr
+#endif
.endm
@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 78db754..ebadf4a 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,6 +22,15 @@
#include <asm/sizes.h>
+#define IMX_IO_ADDRESS(addr, module) \
+ ((void __force __iomem *) \
+ (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+ (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
#ifdef CONFIG_ARCH_MX3
#include <mach/mx3x.h>
#include <mach/mx31.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
index bf23305..6b1507c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -1,166 +1,155 @@
/*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX1_H__
+#define __MACH_IOMUX_MX1_H__
-#ifndef _MXC_IOMUX_MX1_H
-#define _MXC_IOMUX_MX1_H
+#include <mach/iomux-v1.h>
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
+#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
-/* FIXME: This list is not completed. The correct directions are
-* missing on some (many) pins
-*/
-
-
-/* Primary GPIO pin functions */
-
-#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
-
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
index 63aaa97..1495dfd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -1,126 +1,122 @@
/*
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX21_H__
+#define __MACH_IOMUX_MX21_H__
-#ifndef _MXC_IOMUX_MX21_H
-#define _MXC_IOMUX_MX21_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
/* Primary GPIO pin functions */
-#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
+#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
/* Alternate GPIO pin functions */
-#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
+#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
/* AIN GPIO pin functions */
-#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
/* BIN GPIO pin functions */
-#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
/* CIN GPIO pin functions */
-#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
/* AOUT GPIO pin functions */
-#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 9af494f..f39220d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -7,7 +7,7 @@
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
* and
* arch/arm/plat-mxc/include/mach/iomux-mx35.h
- * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -16,24 +16,11 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
+#ifndef __MACH_IOMUX_MX25_H__
+#define __MACH_IOMUX_MX25_H__
#include <mach/iomux-v3.h>
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
-/*
- *
- * @brief MX25 I/O Pin List
- *
- * @ingroup GPIO_MX25
- */
-
-#ifndef __ASSEMBLY__
-
/*
* IOMUX/PAD Bit field definitions
*/
@@ -462,9 +449,11 @@
#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
@@ -513,5 +502,4 @@
#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#endif // __ASSEMBLY__
-#endif // __IOMUX_MX25_H__
+#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
index 5ac158b..d9f9a6e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -1,207 +1,205 @@
/*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX27_H__
+#define __MACH_IOMUX_MX27_H__
-#ifndef _MXC_IOMUX_MX27_H
-#define _MXC_IOMUX_MX27_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
/* Primary GPIO pin functions */
-#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
-#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
-#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
+#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
/* Alternate GPIO pin functions */
-#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
-#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
-#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
+#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
+#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
+#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
+#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
+#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
/* AIN GPIO pin functions */
-#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
/* BIN GPIO pin functions */
-#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
/* CIN GPIO pin functions */
-#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
/* AOUT GPIO pin functions */
-#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+/* BOUT GPIO pin functions */
+#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-#endif /* _MXC_GPIO_MX1_MX2_H */
+#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index fb5ae63..c4f116d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -1,237 +1,230 @@
/*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX2x_H
-#define _MXC_IOMUX_MX2x_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX2x_H__
+#define __MACH_IOMUX_MX2x_H__
/* Primary GPIO pin functions */
-#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24)
-#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
+#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
/* Alternate GPIO pin functions */
-#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
/* AIN GPIO pin functions */
-#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
/* BIN GPIO pin functions */
-#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
/* CIN GPIO pin functions */
-#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
/* AOUT GPIO pin functions */
-#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
+#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index e1fc6da..e51465d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -16,12 +16,10 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
-
-#ifndef __MACH_MX31_IOMUX_H__
-#define __MACH_MX31_IOMUX_H__
+#ifndef __MACH_IOMUX_MX3_H__
+#define __MACH_IOMUX_MX3_H__
#include <linux/types.h>
-
/*
* various IOMUX output functions
*/
@@ -34,7 +32,7 @@
#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
-#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
+#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
#define IOMUX_ICONFIG_FUNC 2 /* used as function */
#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
@@ -167,11 +165,6 @@
MXC_GPIO_IRQ_START)
/*
- * The number of gpio devices among the pads
- */
-#define GPIO_PORT_MAX 3
-
-/*
* This enumeration is constructed based on the Section
* "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
* value is constructed based on the rules described above.
@@ -633,40 +626,40 @@
#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
@@ -711,8 +704,8 @@
#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
@@ -727,13 +720,14 @@
#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
-/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
- * cspi1_ss1*/
+/*
+ * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
+ * cspi2_ss1, cspi1_ss0 cspi1_ss1
+ */
/*
* This function configures the pad value for a IOMUX pin.
*/
void mxc_iomux_set_pad(enum iomux_pins, u32);
-#endif
-
+#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index c88d407..2a24bae 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
new file mode 100644
index 0000000..b4f975e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX51_H__
+#define __MACH_IOMUX_MX51_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+ IOMUX_CONFIG_ALT0,
+ IOMUX_CONFIG_ALT1,
+ IOMUX_CONFIG_ALT2,
+ IOMUX_CONFIG_ALT3,
+ IOMUX_CONFIG_ALT4,
+ IOMUX_CONFIG_ALT5,
+ IOMUX_CONFIG_ALT6,
+ IOMUX_CONFIG_ALT7,
+ IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
+ IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* Pad control groupings */
+#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_DSE_HIGH)
+#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_SRE_FAST)
+#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*
+ * FIXME: This was converted using scripts from existing Freescale code to
+ * this form used upstream. Need to verify the name format.
+ */
+
+/* PAD MUX ALT INPSE PATH PADCTRL */
+
+#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART3 */
+#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
+
+#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
+/* REVISIT: Not sure of these values
+
+ #define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
+ #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+ #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+*/
+#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART1 */
+#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
+
+/* Babbage UART2 */
+#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
+
+#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
+ (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS))
+#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+
+/* EIM */
+#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
new file mode 100644
index 0000000..884f575
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_V1_H__
+#define __MACH_IOMUX_V1_H__
+
+/*
+* GPIO Module and I/O Multiplexer
+* x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define MXC_DDIR(x) (0x00 + ((x) << 8))
+#define MXC_OCR1(x) (0x04 + ((x) << 8))
+#define MXC_OCR2(x) (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x) (0x1c + ((x) << 8))
+#define MXC_GIUS(x) (0x20 + ((x) << 8))
+#define MXC_SSR(x) (0x24 + ((x) << 8))
+#define MXC_ICR1(x) (0x28 + ((x) << 8))
+#define MXC_ICR2(x) (0x2c + ((x) << 8))
+#define MXC_IMR(x) (0x30 + ((x) << 8))
+#define MXC_ISR(x) (0x34 + ((x) << 8))
+#define MXC_GPR(x) (0x38 + ((x) << 8))
+#define MXC_SWR(x) (0x3c + ((x) << 8))
+#define MXC_PUEN(x) (0x40 + ((x) << 8))
+
+#define MX1_NUM_GPIO_PORT 4
+#define MX21_NUM_GPIO_PORT 6
+#define MX27_NUM_GPIO_PORT 6
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT (1 << 8)
+#define GPIO_IN (0 << 8)
+#define GPIO_PUEN (1 << 9)
+
+#define GPIO_PF (1 << 10)
+#define GPIO_AF (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
+
+extern int mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 1deda01..f2f73d3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -81,11 +81,13 @@
#define PAD_CTL_ODE (1 << 3)
-#define PAD_CTL_DSE_STANDARD (0 << 1)
-#define PAD_CTL_DSE_HIGH (1 << 1)
-#define PAD_CTL_DSE_MAX (2 << 1)
+#define PAD_CTL_DSE_LOW (0 << 1)
+#define PAD_CTL_DSE_MED (1 << 1)
+#define PAD_CTL_DSE_HIGH (2 << 1)
+#define PAD_CTL_DSE_MAX (3 << 1)
#define PAD_CTL_SRE_FAST (1 << 0)
+#define PAD_CTL_SRE_SLOW (0 << 0)
/*
* setups a single pad in the iomuxer
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 011cfcd..3d226d7 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -1,102 +1,14 @@
/*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
-#ifndef _MXC_IOMUX_H
-#define _MXC_IOMUX_H
-
-/*
-* GPIO Module and I/O Multiplexer
-* x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x) (0x00 + ((x) << 8))
-#define MXC_OCR1(x) (0x04 + ((x) << 8))
-#define MXC_OCR2(x) (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x) (0x1c + ((x) << 8))
-#define MXC_GIUS(x) (0x20 + ((x) << 8))
-#define MXC_SSR(x) (0x24 + ((x) << 8))
-#define MXC_ICR1(x) (0x28 + ((x) << 8))
-#define MXC_ICR2(x) (0x2c + ((x) << 8))
-#define MXC_IMR(x) (0x30 + ((x) << 8))
-#define MXC_ISR(x) (0x34 + ((x) << 8))
-#define MXC_GPR(x) (0x38 + ((x) << 8))
-#define MXC_SWR(x) (0x3c + ((x) << 8))
-#define MXC_PUEN(x) (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX 3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX 5
-#endif
-#ifdef CONFIG_ARCH_MX25
-# define GPIO_PORT_MAX 3
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT (1 << 8)
-#define GPIO_IN (0 << 8)
-#define GPIO_PUEN (1 << 9)
-
-#define GPIO_PF (1 << 10)
-#define GPIO_AF (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-
+/* This file will go away, please include mach/iomux-mx... directly */
#ifdef CONFIG_ARCH_MX1
#include <mach/iomux-mx1.h>
@@ -110,25 +22,5 @@
#include <mach/iomux-mx27.h>
#endif
#endif
-#ifdef CONFIG_ARCH_MX25
-#include <mach/iomux-mx25.h>
-#endif
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
-
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-#endif
+#endif /* __MACH_IOMUX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 0cb3476..86781f7 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,22 +12,29 @@
#define __ASM_ARCH_MXC_IRQS_H__
/*
- * So far all i.MX SoCs have 64 internal interrupts
+ * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
*/
+#ifdef CONFIG_MXC_TZIC
+#define MXC_INTERNAL_IRQS 128
+#else
#define MXC_INTERNAL_IRQS 64
+#endif
#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
-#if defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_ARCH_MX2
+/* these are ordered by size to support multi-SoC kernels */
+#if defined CONFIG_ARCH_MX2
#define MXC_GPIO_IRQS (32 * 6)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS (32 * 3)
+#elif defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX25
#define MXC_GPIO_IRQS (32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MXC91231
#define MXC_GPIO_IRQS (32 * 4)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS (32 * 3)
#endif
/*
@@ -51,6 +58,7 @@
#else
#define MX3_IPU_IRQS 0
#endif
+/* REVISIT: Add IPU irqs on IMX51 */
#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d3afafd..c4b40c3 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,30 +11,31 @@
#ifndef __ASM_ARCH_MXC_MEMORY_H__
#define __ASM_ARCH_MXC_MEMORY_H__
-#if defined CONFIG_ARCH_MX1
-#define PHYS_OFFSET UL(0x08000000)
-#elif defined CONFIG_ARCH_MX2
-#ifdef CONFIG_MACH_MX21
-#define PHYS_OFFSET UL(0xC0000000)
-#endif
-#ifdef CONFIG_MACH_MX27
-#define PHYS_OFFSET UL(0xA0000000)
-#endif
-#elif defined CONFIG_ARCH_MX3
-#define PHYS_OFFSET UL(0x80000000)
-#elif defined CONFIG_ARCH_MX25
-#define PHYS_OFFSET UL(0x80000000)
-#elif defined CONFIG_ARCH_MXC91231
-#define PHYS_OFFSET UL(0x90000000)
-#endif
+#define MX1_PHYS_OFFSET UL(0x08000000)
+#define MX21_PHYS_OFFSET UL(0xc0000000)
+#define MX25_PHYS_OFFSET UL(0x80000000)
+#define MX27_PHYS_OFFSET UL(0xa0000000)
+#define MX3x_PHYS_OFFSET UL(0x80000000)
+#define MX51_PHYS_OFFSET UL(0x90000000)
+#define MXC91231_PHYS_OFFSET UL(0x90000000)
-#if defined(CONFIG_MX1_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
+# if defined CONFIG_ARCH_MX1
+# define PHYS_OFFSET MX1_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX21
+# define PHYS_OFFSET MX21_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX25
+# define PHYS_OFFSET MX25_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX27
+# define PHYS_OFFSET MX27_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX3
+# define PHYS_OFFSET MX3x_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MXC91231
+# define PHYS_OFFSET MXC91231_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX5
+# define PHYS_OFFSET MX51_PHYS_OFFSET
+# endif
+#endif
#if defined(CONFIG_MX3_VIDEO)
/*
@@ -42,6 +43,13 @@
* This is required for mx3 camera driver to capture at least two QXGA frames.
*/
#define CONSISTENT_DMA_SIZE SZ_8M
-#endif /* CONFIG_MX3_VIDEO */
+
+#elif defined(CONFIG_MX1_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for i.MX camera driver to capture at least four VGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+#endif /* CONFIG_MX1_VIDEO */
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
deleted file mode 100644
index 1ab1bba..0000000
--- a/arch/arm/plat-mxc/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/mxc_timer.h>
-
-#ifndef __ARCH_IMX_MTD_XIP_H__
-#define __ARCH_IMX_MTD_XIP_H__
-
-#ifdef CONFIG_ARCH_MX1
-/* AITC registers */
-#define AITC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define NIPNDH (AITC_BASE + 0x58)
-#define NIPNDL (AITC_BASE + 0x5C)
-#define INTENABLEH (AITC_BASE + 0x10)
-#define INTENABLEL (AITC_BASE + 0x14)
-/* MTD macros */
-#define xip_irqpending() ((__raw_readl(INTENABLEH) & __raw_readl(NIPNDH)) \
- || (__raw_readl(INTENABLEL) & __raw_readl(NIPNDL)))
-#define xip_currtime() (__raw_readl(TIMER_BASE + MXC_TCN))
-#define xip_elapsed_since(x) (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
-#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
-#endif /* CONFIG_ARCH_MX1 */
-
-#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1b2890a..5eba7e6 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -9,156 +9,289 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
#include <mach/vmalloc.h>
/*
* Memory map
*/
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE VMALLOC_END
+#define MX1_IO_BASE_ADDR 0x00200000
+#define MX1_IO_SIZE SZ_1M
+#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
+#define MX1_CS0_PHYS 0x10000000
+#define MX1_CS0_SIZE 0x02000000
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
+#define MX1_CS1_PHYS 0x12000000
+#define MX1_CS1_SIZE 0x01000000
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
+#define MX1_CS2_PHYS 0x13000000
+#define MX1_CS2_SIZE 0x01000000
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
+#define MX1_CS3_PHYS 0x14000000
+#define MX1_CS3_SIZE 0x01000000
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
+#define MX1_CS4_PHYS 0x15000000
+#define MX1_CS4_SIZE 0x01000000
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
+#define MX1_CS5_PHYS 0x16000000
+#define MX1_CS5_SIZE 0x01000000
/*
* Register BASEs, based on OFFSETs
*/
-#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS)
-#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS)
-#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS)
-#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS)
-#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS)
-#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS)
-#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS)
-#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS)
-#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS)
-#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS)
-#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS)
-#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS)
-#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS)
-#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS)
-#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS)
-#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS)
-#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS)
-#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS)
-#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS)
-#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS)
-#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS)
-#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS)
-#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS)
-#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS)
-#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS)
-#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS)
-#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS)
-#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS)
-#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS)
+#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR)
/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE)
-
-/* define macros needed for entry-macro.S */
-#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define MX1_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX1_IO))
/* fixed interrput numbers */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-#define WDT_INT 63
+#define MX1_INT_SOFTINT 0
+#define MX1_CSI_INT 6
+#define MX1_DSPA_MAC_INT 7
+#define MX1_DSPA_INT 8
+#define MX1_COMP_INT 9
+#define MX1_MSHC_XINT 10
+#define MX1_GPIO_INT_PORTA 11
+#define MX1_GPIO_INT_PORTB 12
+#define MX1_GPIO_INT_PORTC 13
+#define MX1_LCDC_INT 14
+#define MX1_SIM_INT 15
+#define MX1_SIM_DATA_INT 16
+#define MX1_RTC_INT 17
+#define MX1_RTC_SAMINT 18
+#define MX1_UART2_MINT_PFERR 19
+#define MX1_UART2_MINT_RTS 20
+#define MX1_UART2_MINT_DTR 21
+#define MX1_UART2_MINT_UARTC 22
+#define MX1_UART2_MINT_TX 23
+#define MX1_UART2_MINT_RX 24
+#define MX1_UART1_MINT_PFERR 25
+#define MX1_UART1_MINT_RTS 26
+#define MX1_UART1_MINT_DTR 27
+#define MX1_UART1_MINT_UARTC 28
+#define MX1_UART1_MINT_TX 29
+#define MX1_UART1_MINT_RX 30
+#define MX1_VOICE_DAC_INT 31
+#define MX1_VOICE_ADC_INT 32
+#define MX1_PEN_DATA_INT 33
+#define MX1_PWM_INT 34
+#define MX1_SDHC_INT 35
+#define MX1_I2C_INT 39
+#define MX1_CSPI_INT 41
+#define MX1_SSI_TX_INT 42
+#define MX1_SSI_TX_ERR_INT 43
+#define MX1_SSI_RX_INT 44
+#define MX1_SSI_RX_ERR_INT 45
+#define MX1_TOUCH_INT 46
+#define MX1_USBD_INT0 47
+#define MX1_USBD_INT1 48
+#define MX1_USBD_INT2 49
+#define MX1_USBD_INT3 50
+#define MX1_USBD_INT4 51
+#define MX1_USBD_INT5 52
+#define MX1_USBD_INT6 53
+#define MX1_BTSYS_INT 55
+#define MX1_BTTIM_INT 56
+#define MX1_BTWUI_INT 57
+#define MX1_TIM2_INT 58
+#define MX1_TIM1_INT 59
+#define MX1_DMA_ERR 60
+#define MX1_DMA_INT 61
+#define MX1_GPIO_INT_PORTD 62
+#define MX1_WDT_INT 63
/* DMA */
-#define DMA_REQ_UART3_T 2
-#define DMA_REQ_UART3_R 3
-#define DMA_REQ_SSI2_T 4
-#define DMA_REQ_SSI2_R 5
-#define DMA_REQ_CSI_STAT 6
-#define DMA_REQ_CSI_R 7
-#define DMA_REQ_MSHC 8
-#define DMA_REQ_DSPA_DCT_DOUT 9
-#define DMA_REQ_DSPA_DCT_DIN 10
-#define DMA_REQ_DSPA_MAC 11
-#define DMA_REQ_EXT 12
-#define DMA_REQ_SDHC 13
-#define DMA_REQ_SPI1_R 14
-#define DMA_REQ_SPI1_T 15
-#define DMA_REQ_SSI_T 16
-#define DMA_REQ_SSI_R 17
-#define DMA_REQ_ASP_DAC 18
-#define DMA_REQ_ASP_ADC 19
-#define DMA_REQ_USP_EP(x) (20 + (x))
-#define DMA_REQ_SPI2_R 26
-#define DMA_REQ_SPI2_T 27
-#define DMA_REQ_UART2_T 28
-#define DMA_REQ_UART2_R 29
-#define DMA_REQ_UART1_T 30
-#define DMA_REQ_UART1_R 31
+#define MX1_DMA_REQ_UART3_T 2
+#define MX1_DMA_REQ_UART3_R 3
+#define MX1_DMA_REQ_SSI2_T 4
+#define MX1_DMA_REQ_SSI2_R 5
+#define MX1_DMA_REQ_CSI_STAT 6
+#define MX1_DMA_REQ_CSI_R 7
+#define MX1_DMA_REQ_MSHC 8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT 9
+#define MX1_DMA_REQ_DSPA_DCT_DIN 10
+#define MX1_DMA_REQ_DSPA_MAC 11
+#define MX1_DMA_REQ_EXT 12
+#define MX1_DMA_REQ_SDHC 13
+#define MX1_DMA_REQ_SPI1_R 14
+#define MX1_DMA_REQ_SPI1_T 15
+#define MX1_DMA_REQ_SSI_T 16
+#define MX1_DMA_REQ_SSI_R 17
+#define MX1_DMA_REQ_ASP_DAC 18
+#define MX1_DMA_REQ_ASP_ADC 19
+#define MX1_DMA_REQ_USP_EP(x) (20 + (x))
+#define MX1_DMA_REQ_SPI2_R 26
+#define MX1_DMA_REQ_SPI2_T 27
+#define MX1_DMA_REQ_UART2_T 28
+#define MX1_DMA_REQ_UART2_R 29
+#define MX1_DMA_REQ_UART1_T 30
+#define MX1_DMA_REQ_UART1_R 31
-#endif /* __ASM_ARCH_MXC_MX1_H__ */
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc. Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0 MX1_USBD_INT0
+
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
+/* these should go away */
+#define IMX_IO_PHYS MX1_IO_BASE_ADDR
+#define IMX_IO_SIZE MX1_IO_SIZE
+#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
+#define IMX_CS0_PHYS MX1_CS0_PHYS
+#define IMX_CS0_SIZE MX1_CS0_SIZE
+#define IMX_CS1_PHYS MX1_CS1_PHYS
+#define IMX_CS1_SIZE MX1_CS1_SIZE
+#define IMX_CS2_PHYS MX1_CS2_PHYS
+#define IMX_CS2_SIZE MX1_CS2_SIZE
+#define IMX_CS3_PHYS MX1_CS3_PHYS
+#define IMX_CS3_SIZE MX1_CS3_SIZE
+#define IMX_CS4_PHYS MX1_CS4_PHYS
+#define IMX_CS4_SIZE MX1_CS4_SIZE
+#define IMX_CS5_PHYS MX1_CS5_PHYS
+#define IMX_CS5_SIZE MX1_CS5_SIZE
+#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
+#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
+#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
+#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
+#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
+#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
+#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
+#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
+#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
+#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
+#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
+#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
+#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
+#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
+#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
+#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
+#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
+#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
+#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
+#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
+#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
+#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
+#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
+#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
+#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
+#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
+#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
+#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define INT_SOFTINT MX1_INT_SOFTINT
+#define CSI_INT MX1_CSI_INT
+#define DSPA_MAC_INT MX1_DSPA_MAC_INT
+#define DSPA_INT MX1_DSPA_INT
+#define COMP_INT MX1_COMP_INT
+#define MSHC_XINT MX1_MSHC_XINT
+#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
+#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
+#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
+#define LCDC_INT MX1_LCDC_INT
+#define SIM_INT MX1_SIM_INT
+#define SIM_DATA_INT MX1_SIM_DATA_INT
+#define RTC_INT MX1_RTC_INT
+#define RTC_SAMINT MX1_RTC_SAMINT
+#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
+#define UART2_MINT_RTS MX1_UART2_MINT_RTS
+#define UART2_MINT_DTR MX1_UART2_MINT_DTR
+#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
+#define UART2_MINT_TX MX1_UART2_MINT_TX
+#define UART2_MINT_RX MX1_UART2_MINT_RX
+#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
+#define UART1_MINT_RTS MX1_UART1_MINT_RTS
+#define UART1_MINT_DTR MX1_UART1_MINT_DTR
+#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
+#define UART1_MINT_TX MX1_UART1_MINT_TX
+#define UART1_MINT_RX MX1_UART1_MINT_RX
+#define VOICE_DAC_INT MX1_VOICE_DAC_INT
+#define VOICE_ADC_INT MX1_VOICE_ADC_INT
+#define PEN_DATA_INT MX1_PEN_DATA_INT
+#define PWM_INT MX1_PWM_INT
+#define SDHC_INT MX1_SDHC_INT
+#define I2C_INT MX1_I2C_INT
+#define CSPI_INT MX1_CSPI_INT
+#define SSI_TX_INT MX1_SSI_TX_INT
+#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
+#define SSI_RX_INT MX1_SSI_RX_INT
+#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
+#define TOUCH_INT MX1_TOUCH_INT
+#define USBD_INT1 MX1_USBD_INT1
+#define USBD_INT2 MX1_USBD_INT2
+#define USBD_INT3 MX1_USBD_INT3
+#define USBD_INT4 MX1_USBD_INT4
+#define USBD_INT5 MX1_USBD_INT5
+#define USBD_INT6 MX1_USBD_INT6
+#define BTSYS_INT MX1_BTSYS_INT
+#define BTTIM_INT MX1_BTTIM_INT
+#define BTWUI_INT MX1_BTWUI_INT
+#define TIM2_INT MX1_TIM2_INT
+#define TIM1_INT MX1_TIM1_INT
+#define DMA_ERR MX1_DMA_ERR
+#define DMA_INT MX1_DMA_INT
+#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
+#define WDT_INT MX1_WDT_INT
+#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
+#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
+#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
+#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
+#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
+#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
+#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
+#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
+#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
+#define DMA_REQ_EXT MX1_DMA_REQ_EXT
+#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
+#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
+#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
+#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
+#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
+#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
+#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
+#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
+#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
+#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
+#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
+#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
+#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
+#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
+#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+
+#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index bb297d8..ed98b9c 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -22,8 +22,8 @@
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
#define MX21_AIPI_BASE_ADDR 0x10000000
#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000
@@ -92,6 +92,11 @@
#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
+#define MX21_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX21_AIPI) ?: \
+ IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \
+ IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
/* fixed interrupt numbers */
#define MX21_INT_CSPI3 6
#define MX21_INT_GPIO 8
@@ -179,6 +184,7 @@
#define MX21_DMA_REQ_CSI_STAT 30
#define MX21_DMA_REQ_CSI_RX 31
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
@@ -211,5 +217,6 @@
#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 854e2dc..4eb6e33 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -22,27 +22,27 @@
#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
-#define MX25_AIPS1_IO_ADDRESS(x) \
- (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x) \
- (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x) \
- (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+#define MX25_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \
+ IMX_IO_ADDRESS(x, MX25_AVIC))
-#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x) \
- (void __force __iomem *) \
- (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
- __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \
- __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \
- 0xDEADBEEF)
-
-#define UART1_BASE_ADDR 0x43f90000
-#define UART2_BASE_ADDR 0x43f94000
+#define MX25_UART1_BASE_ADDR 0x43f90000
+#define MX25_UART2_BASE_ADDR 0x43f94000
#define MX25_FEC_BASE_ADDR 0x50038000
+#define MX25_NFC_BASE_ADDR 0xbb000000
+#define MX25_DRYICE_BASE_ADDR 0x53ffc000
+#define MX25_LCDC_BASE_ADDR 0x53fbc000
+#define MX25_INT_DRYICE 25
#define MX25_INT_FEC 57
+#define MX25_INT_NANDFC 33
+#define MX25_INT_LCDC 39
-#endif /* __MACH_MX25_H__ */
+#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
+#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX25_UART2_BASE_ADDR
+#endif
+
+#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index e2ae19f..bae9cd7 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -21,8 +21,12 @@
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000
@@ -109,11 +113,31 @@
#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
/* IRAM */
#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
+#define MX27_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX27_AIPI) ?: \
+ IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \
+ IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+ unsigned upper, unsigned lower, unsigned addional)
+{
+ __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+ __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+ __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
/* fixed interrupt numbers */
#define MX27_INT_I2C2 1
#define MX27_INT_GPT6 2
@@ -225,6 +249,7 @@
extern int mx27_revision(void);
#endif
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
@@ -292,5 +317,6 @@
#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
#define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index f2eaf14..afb895a 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -20,8 +20,8 @@
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
/* The following addresses are common between i.MX21 and i.MX27 */
@@ -176,6 +176,7 @@
#define MX2x_DMA_REQ_CSI_STAT 30
#define MX2x_DMA_REQ_CSI_RX 31
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
@@ -287,5 +288,6 @@
#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index b8b47d1..fb90e11 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,3 +1,10 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
/*
* IRAM
*/
@@ -107,8 +114,30 @@
#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
+#define MX31_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \
+ IMX_IO_ADDRESS(x, MX31_AVIC) ?: \
+ IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \
+ IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+ unsigned upper, unsigned lower, unsigned addional)
+{
+ __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+ __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+ __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5
@@ -186,6 +215,7 @@
#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0
#define MX31_SYSTEM_REV_NUM 3
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
@@ -216,3 +246,6 @@
#define MXC_INT_UART5 MX31_INT_UART5
#define MXC_INT_CCM MX31_INT_CCM
#define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af871bc..526a558 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,3 +1,5 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
/*
* IRAM
*/
@@ -104,6 +106,13 @@
#define MX35_NFC_BASE_ADDR 0xbb000000
#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
+#define MX35_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \
+ IMX_IO_ADDRESS(x, MX35_AVIC) ?: \
+ IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \
+ IMX_IO_ADDRESS(x, MX35_SPBA0))
+
/*
* Interrupt numbers
*/
@@ -180,6 +189,7 @@
#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0
#define MX35_SYSTEM_REV_NUM 3
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
#define MXC_INT_OWIRE MX35_INT_OWIRE
@@ -195,3 +205,6 @@
#define MXC_INT_MLB MX35_INT_MLB
#define MXC_INT_SPDIF MX35_INT_SPDIF
#define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index be69272..7a356de3 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
/*
* MX31 memory map:
@@ -269,6 +269,7 @@
}
#endif
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
#define L2CC_SIZE MX3x_L2CC_SIZE
@@ -401,5 +402,6 @@
#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
-#endif /* __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
new file mode 100644
index 0000000..771532b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -0,0 +1,454 @@
+#ifndef __ASM_ARCH_MXC_MX51_H__
+#define __ASM_ARCH_MXC_MX51_H__
+
+/*
+ * MX51 memory map:
+ *
+ *
+ * Virt Phys Size What
+ * ---------------------------------------------------------------------------
+ * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM)
+ * 30000000 256M GPU
+ * 40000000 512M IPU
+ * FA200000 60000000 1M DEBUG
+ * FB100000 70000000 1M SPBA 0
+ * FB000000 73F00000 1M AIPS 1
+ * FB200000 83F00000 1M AIPS 2
+ * FA100000 8FFFC000 16K TZIC (interrupt controller)
+ * 90000000 256M CSD0 SDRAM/DDR
+ * A0000000 256M CSD1 SDRAM/DDR
+ * B0000000 128M CS0 Flash
+ * B8000000 128M CS1 Flash
+ * C0000000 128M CS2 Flash
+ * C8000000 64M CS3 Flash
+ * CC000000 32M CS4 SRAM
+ * CE000000 32M CS5 SRAM
+ * F9000000 CFFF0000 64K NFC (NAND Flash AXI)
+ *
+ */
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000
+#define MX51_IRAM_PARTITIONS 16
+#define MX51_IRAM_PARTITIONS_TO1 12
+#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */
+#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000
+#define MX51_NFC_AXI_SIZE SZ_64K
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX51_GPU_BASE_ADDR 0x20000000
+#define MX51_GPU2D_BASE_ADDR 0xD0000000
+
+#define MX51_TZIC_BASE_ADDR 0x8FFFC000
+#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000
+#define MX51_TZIC_SIZE SZ_16K
+
+#define MX51_DEBUG_BASE_ADDR 0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000
+#define MX51_DEBUG_SIZE SZ_1M
+#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000)
+#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000)
+#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000)
+#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000)
+#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000)
+#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000)
+#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000)
+#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR 0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000
+#define MX51_SPBA0_SIZE SZ_1M
+
+#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1 0x04
+#define MX51_SPBA_SDHC2 0x08
+#define MX51_SPBA_UART3 0x0C
+#define MX51_SPBA_CSPI1 0x10
+#define MX51_SPBA_SSI2 0x14
+#define MX51_SPBA_SDHC3 0x20
+#define MX51_SPBA_SDHC4 0x24
+#define MX51_SPBA_SPDIF 0x28
+#define MX51_SPBA_ATA 0x30
+#define MX51_SPBA_SLIM 0x34
+#define MX51_SPBA_HSI2C 0x38
+#define MX51_SPBA_CTRL 0x3C
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 0x73F00000
+#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000
+#define MX51_AIPS1_SIZE SZ_1M
+
+#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000)
+#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000)
+#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000)
+#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000)
+#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000)
+#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000)
+#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000)
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM 30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#endif /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR 0x83F00000
+#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000
+#define MX51_AIPS2_SIZE SZ_1M
+
+#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000)
+#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000)
+#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000)
+#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000)
+#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000)
+#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000)
+#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
+#define MX51_CSD0_BASE_ADDR 0x90000000
+#define MX51_CSD1_BASE_ADDR 0xA0000000
+#define MX51_CS0_BASE_ADDR 0xB0000000
+#define MX51_CS1_BASE_ADDR 0xB8000000
+#define MX51_CS2_BASE_ADDR 0xC0000000
+#define MX51_CS3_BASE_ADDR 0xC8000000
+#define MX51_CS4_BASE_ADDR 0xCC000000
+#define MX51_CS5_BASE_ADDR 0xCE000000
+
+/* Does given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+ (((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Does given address belongs to the specified named `module'? */
+#define MX51_IS_MODULE(addr, module) \
+ ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
+ MX51_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MX51_IO_ADDRESS(x) \
+ (void __iomem *) \
+ (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+ 0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MX51_IRAM_IO_ADDRESS(x) \
+ (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
+
+#define MX51_TZIC_IO_ADDRESS(x) \
+ (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
+
+#define MX51_DEBUG_IO_ADDRESS(x) \
+ (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
+
+#define MX51_SPBA0_IO_ADDRESS(x) \
+ (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
+
+#define MX51_AIPS1_IO_ADDRESS(x) \
+ (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+
+#define MX51_AIPS2_IO_ADDRESS(x) \
+ (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
+
+#define MX51_NFC_AXI_IO_ADDRESS(x) \
+ (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_SSI3_TX1 47
+#define MX51_DMA_REQ_SSI3_RX1 46
+#define MX51_DMA_REQ_SPDIF 45
+#define MX51_DMA_REQ_UART3_TX 44
+#define MX51_DMA_REQ_UART3_RX 43
+#define MX51_DMA_REQ_SLIM_B_TX 42
+#define MX51_DMA_REQ_SDHC4 41
+#define MX51_DMA_REQ_SDHC3 40
+#define MX51_DMA_REQ_CSPI_TX 39
+#define MX51_DMA_REQ_CSPI_RX 38
+#define MX51_DMA_REQ_SSI3_TX2 37
+#define MX51_DMA_REQ_IPU 36
+#define MX51_DMA_REQ_SSI3_RX2 35
+#define MX51_DMA_REQ_EPIT2 34
+#define MX51_DMA_REQ_CTI2_1 33
+#define MX51_DMA_REQ_EMI_WR 32
+#define MX51_DMA_REQ_CTI2_0 31
+#define MX51_DMA_REQ_EMI_RD 30
+#define MX51_DMA_REQ_SSI1_TX1 29
+#define MX51_DMA_REQ_SSI1_RX1 28
+#define MX51_DMA_REQ_SSI1_TX2 27
+#define MX51_DMA_REQ_SSI1_RX2 26
+#define MX51_DMA_REQ_SSI2_TX1 25
+#define MX51_DMA_REQ_SSI2_RX1 24
+#define MX51_DMA_REQ_SSI2_TX2 23
+#define MX51_DMA_REQ_SSI2_RX2 22
+#define MX51_DMA_REQ_SDHC2 21
+#define MX51_DMA_REQ_SDHC1 20
+#define MX51_DMA_REQ_UART1_TX 19
+#define MX51_DMA_REQ_UART1_RX 18
+#define MX51_DMA_REQ_UART2_TX 17
+#define MX51_DMA_REQ_UART2_RX 16
+#define MX51_DMA_REQ_GPU 15
+#define MX51_DMA_REQ_EXTREQ1 14
+#define MX51_DMA_REQ_FIRI_TX 13
+#define MX51_DMA_REQ_FIRI_RX 12
+#define MX51_DMA_REQ_HS_I2C_RX 11
+#define MX51_DMA_REQ_HS_I2C_TX 10
+#define MX51_DMA_REQ_CSPI2_TX 9
+#define MX51_DMA_REQ_CSPI2_RX 8
+#define MX51_DMA_REQ_CSPI1_TX 7
+#define MX51_DMA_REQ_CSPI1_RX 6
+#define MX51_DMA_REQ_SLIM_B 5
+#define MX51_DMA_REQ_ATA_TX_END 4
+#define MX51_DMA_REQ_ATA_TX 3
+#define MX51_DMA_REQ_ATA_RX 2
+#define MX51_DMA_REQ_GPC 1
+#define MX51_DMA_REQ_VPU 0
+
+/*
+ * Interrupt numbers
+ */
+#define MX51_MXC_INT_BASE 0
+#define MX51_MXC_INT_RESV0 0
+#define MX51_MXC_INT_MMC_SDHC1 1
+#define MX51_MXC_INT_MMC_SDHC2 2
+#define MX51_MXC_INT_MMC_SDHC3 3
+#define MX51_MXC_INT_MMC_SDHC4 4
+#define MX51_MXC_INT_RESV5 5
+#define MX51_MXC_INT_SDMA 6
+#define MX51_MXC_INT_IOMUX 7
+#define MX51_MXC_INT_NFC 8
+#define MX51_MXC_INT_VPU 9
+#define MX51_MXC_INT_IPU_ERR 10
+#define MX51_MXC_INT_IPU_SYN 11
+#define MX51_MXC_INT_GPU 12
+#define MX51_MXC_INT_RESV13 13
+#define MX51_MXC_INT_USB_H1 14
+#define MX51_MXC_INT_EMI 15
+#define MX51_MXC_INT_USB_H2 16
+#define MX51_MXC_INT_USB_H3 17
+#define MX51_MXC_INT_USB_OTG 18
+#define MX51_MXC_INT_SAHARA_H0 19
+#define MX51_MXC_INT_SAHARA_H1 20
+#define MX51_MXC_INT_SCC_SMN 21
+#define MX51_MXC_INT_SCC_STZ 22
+#define MX51_MXC_INT_SCC_SCM 23
+#define MX51_MXC_INT_SRTC_NTZ 24
+#define MX51_MXC_INT_SRTC_TZ 25
+#define MX51_MXC_INT_RTIC 26
+#define MX51_MXC_INT_CSU 27
+#define MX51_MXC_INT_SLIM_B 28
+#define MX51_MXC_INT_SSI1 29
+#define MX51_MXC_INT_SSI2 30
+#define MX51_MXC_INT_UART1 31
+#define MX51_MXC_INT_UART2 32
+#define MX51_MXC_INT_UART3 33
+#define MX51_MXC_INT_RESV34 34
+#define MX51_MXC_INT_RESV35 35
+#define MX51_MXC_INT_CSPI1 36
+#define MX51_MXC_INT_CSPI2 37
+#define MX51_MXC_INT_CSPI 38
+#define MX51_MXC_INT_GPT 39
+#define MX51_MXC_INT_EPIT1 40
+#define MX51_MXC_INT_EPIT2 41
+#define MX51_MXC_INT_GPIO1_INT7 42
+#define MX51_MXC_INT_GPIO1_INT6 43
+#define MX51_MXC_INT_GPIO1_INT5 44
+#define MX51_MXC_INT_GPIO1_INT4 45
+#define MX51_MXC_INT_GPIO1_INT3 46
+#define MX51_MXC_INT_GPIO1_INT2 47
+#define MX51_MXC_INT_GPIO1_INT1 48
+#define MX51_MXC_INT_GPIO1_INT0 49
+#define MX51_MXC_INT_GPIO1_LOW 50
+#define MX51_MXC_INT_GPIO1_HIGH 51
+#define MX51_MXC_INT_GPIO2_LOW 52
+#define MX51_MXC_INT_GPIO2_HIGH 53
+#define MX51_MXC_INT_GPIO3_LOW 54
+#define MX51_MXC_INT_GPIO3_HIGH 55
+#define MX51_MXC_INT_GPIO4_LOW 56
+#define MX51_MXC_INT_GPIO4_HIGH 57
+#define MX51_MXC_INT_WDOG1 58
+#define MX51_MXC_INT_WDOG2 59
+#define MX51_MXC_INT_KPP 60
+#define MX51_MXC_INT_PWM1 61
+#define MX51_MXC_INT_I2C1 62
+#define MX51_MXC_INT_I2C2 63
+#define MX51_MXC_INT_HS_I2C 64
+#define MX51_MXC_INT_RESV65 65
+#define MX51_MXC_INT_RESV66 66
+#define MX51_MXC_INT_SIM_IPB 67
+#define MX51_MXC_INT_SIM_DAT 68
+#define MX51_MXC_INT_IIM 69
+#define MX51_MXC_INT_ATA 70
+#define MX51_MXC_INT_CCM1 71
+#define MX51_MXC_INT_CCM2 72
+#define MX51_MXC_INT_GPC1 73
+#define MX51_MXC_INT_GPC2 74
+#define MX51_MXC_INT_SRC 75
+#define MX51_MXC_INT_NM 76
+#define MX51_MXC_INT_PMU 77
+#define MX51_MXC_INT_CTI_IRQ 78
+#define MX51_MXC_INT_CTI1_TG0 79
+#define MX51_MXC_INT_CTI1_TG1 80
+#define MX51_MXC_INT_MCG_ERR 81
+#define MX51_MXC_INT_MCG_TMR 82
+#define MX51_MXC_INT_MCG_FUNC 83
+#define MX51_MXC_INT_GPU2_IRQ 84
+#define MX51_MXC_INT_GPU2_BUSY 85
+#define MX51_MXC_INT_RESV86 86
+#define MX51_MXC_INT_FEC 87
+#define MX51_MXC_INT_OWIRE 88
+#define MX51_MXC_INT_CTI1_TG2 89
+#define MX51_MXC_INT_SJC 90
+#define MX51_MXC_INT_SPDIF 91
+#define MX51_MXC_INT_TVE 92
+#define MX51_MXC_INT_FIRI 93
+#define MX51_MXC_INT_PWM2 94
+#define MX51_MXC_INT_SLIM_EXP 95
+#define MX51_MXC_INT_SSI3 96
+#define MX51_MXC_INT_EMI_BOOT 97
+#define MX51_MXC_INT_CTI1_TG3 98
+#define MX51_MXC_INT_SMC_RX 99
+#define MX51_MXC_INT_VPU_IDLE 100
+#define MX51_MXC_INT_EMI_NFC 101
+#define MX51_MXC_INT_GPU_IDLE 102
+
+/* silicon revisions specific to i.MX51 */
+#define MX51_CHIP_REV_1_0 0x10
+#define MX51_CHIP_REV_1_1 0x11
+#define MX51_CHIP_REV_1_2 0x12
+#define MX51_CHIP_REV_1_3 0x13
+#define MX51_CHIP_REV_2_0 0x20
+#define MX51_CHIP_REV_2_1 0x21
+#define MX51_CHIP_REV_2_2 0x22
+#define MX51_CHIP_REV_2_3 0x23
+#define MX51_CHIP_REV_3_0 0x30
+#define MX51_CHIP_REV_3_1 0x31
+#define MX51_CHIP_REV_3_2 0x32
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline unsigned int mx51_revision(void)
+{
+ return system_rev;
+}
+#endif
+
+#endif /* __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5199053..a790bf2 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
+#define MXC_CPU_MX51 51
#define MXC_CPU_MXC91231 91231
#ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@
# define cpu_is_mx35() (0)
#endif
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51() (0)
+#endif
+
#ifdef CONFIG_ARCH_MXC91231
# ifdef mxc_cpu_type
# undef mxc_cpu_type
@@ -121,9 +134,10 @@
#endif
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
#endif
#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 81484d1..5182b98 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -184,60 +184,22 @@
#define MXC91231_CS4_BASE_ADDR 0xB4000000
#define MXC91231_CS5_BASE_ADDR 0xB6000000
-/* Is given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size) \
- (((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Is given address belongs to the specified named `module'? */
-#define MXC91231_IS_MODULE(addr, module) \
- ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
- MXC91231_ ## module ## _SIZE)
/*
* This macro defines the physical to virtual address mapping for all the
* peripheral modules. It is used by passing in the physical address as x
* and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
+ * it returns 0.
*/
-#define MXC91231_IO_ADDRESS(x) \
- (void __iomem *) \
- (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
- MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
- 0xDEADBEEF)
-
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define MXC91231_L2CC_IO_ADDRESS(x) \
- (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS1_IO_ADDRESS(x) \
- (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA0_IO_ADDRESS(x) \
- (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA1_IO_ADDRESS(x) \
- (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS2_IO_ADDRESS(x) \
- (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
-
-#define MXC91231_ROMP_IO_ADDRESS(x) \
- (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
-
-#define MXC91231_AVIC_IO_ADDRESS(x) \
- (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
-
-#define MXC91231_X_MEMC_IO_ADDRESS(x) \
- (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+#define MXC91231_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MXC91231_L2CC) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_ROMP) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_AVIC) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?: \
+ IMX_IO_ADDRESS(x, MXC91231_AIPS2))
/*
* Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 8f79623..4b9b836 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -22,6 +22,10 @@
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_TTL_ENABLED (1 << 6)
+#define MXC_EHCI_INTERNAL_PHY (1 << 7)
+#define MXC_EHCI_IPPUE_DOWN (1 << 8)
+#define MXC_EHCI_IPPUE_UP (1 << 9)
+
struct mxc_usbh_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
new file mode 100644
index 0000000..c34ded5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -0,0 +1,18 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+ unsigned int flags;
+#define IMX_SSI_DMA (1 << 0)
+#define IMX_SSI_USE_AC97 (1 << 1)
+ void (*ac97_reset) (struct snd_ac97 *ac97);
+ void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 527a6c2..024416e 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
#define CLOCK_TICK_RATE 16625000
#elif defined CONFIG_ARCH_MX25
#define CLOCK_TICK_RATE 16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE 8000000
#elif defined CONFIG_ARCH_MXC91231
#define CLOCK_TICK_RATE 13000000
#endif
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index d49384c..52e476a 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -1,8 +1,6 @@
/*
* arch/arm/plat-mxc/include/mach/uncompress.h
*
- *
- *
* Copyright (C) 1999 ARM Limited
* Copyright (C) Shane Nay (shane@minirl.com)
*
@@ -25,7 +23,6 @@
#define __MXC_BOOT_UNCOMPRESS
-#include <mach/hardware.h>
#include <asm/mach-types.h>
static unsigned long uart_base;
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
deleted file mode 100644
index a37163c..0000000
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * arch/arm/mach-mxc/generic.c
- *
- * author: Sascha Hauer
- * Created: april 20th, 2004
- * Copyright: Synertronixx GmbH
- *
- * Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux.h>
-
-void mxc_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int tmp;
-
- /* Pullup enable */
- tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
- if (gpio_mode & GPIO_PUEN)
- tmp |= (1 << pin);
- else
- tmp &= ~(1 << pin);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
-
- /* Data direction */
- tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
- if (gpio_mode & GPIO_OUT)
- tmp |= 1 << pin;
- else
- tmp &= ~(1 << pin);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
-
- /* Primary / alternate function */
- tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
- if (gpio_mode & GPIO_AF)
- tmp |= (1 << pin);
- else
- tmp &= ~(1 << pin);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
-
- /* use as gpio? */
- tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
- if (gpio_mode & (GPIO_PF | GPIO_AF))
- tmp &= ~(1 << pin);
- else
- tmp |= (1 << pin);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
-
- if (pin < 16) {
- tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
- tmp &= ~(3 << (pin * 2));
- tmp |= (ocr << (pin * 2));
- __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
-
- tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
- tmp &= ~(3 << (pin * 2));
- tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
-
- tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
- tmp &= ~(3 << (pin * 2));
- tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
- } else {
- pin -= 16;
-
- tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
- tmp &= ~(3 << (pin * 2));
- tmp |= (ocr << (pin * 2));
- __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
-
- tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
- tmp &= ~(3 << (pin * 2));
- tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
-
- tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
- tmp &= ~(3 << (pin * 2));
- tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
- __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
- }
-}
-EXPORT_SYMBOL(mxc_gpio_mode);
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label)
-{
- const int *p = pin_list;
- int i;
- unsigned gpio;
- unsigned mode;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
- goto setup_error;
-
- ret = gpio_request(gpio, label);
- if (ret)
- goto setup_error;
-
- mxc_gpio_mode(gpio | mode);
-
- p++;
- }
- return 0;
-
-setup_error:
- mxc_gpio_release_multiple_pins(pin_list, i);
- return ret;
-}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
- const int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- gpio_free(gpio);
- p++;
- }
-
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
new file mode 100644
index 0000000..960a02c
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/plat-mxc/iomux-v1.c
+ *
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
+ *
+ * Common code for i.MX1, i.MX21 and i.MX27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v1.h>
+
+static void __iomem *imx_iomuxv1_baseaddr;
+static unsigned imx_iomuxv1_numports;
+
+static inline unsigned long imx_iomuxv1_readl(unsigned offset)
+{
+ return __raw_readl(imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
+{
+ __raw_writel(val, imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_rmwl(unsigned offset,
+ unsigned long mask, unsigned long value)
+{
+ unsigned long reg = imx_iomuxv1_readl(offset);
+
+ reg &= ~mask;
+ reg |= value;
+
+ imx_iomuxv1_writel(reg, offset);
+}
+
+static inline void imx_iomuxv1_set_puen(
+ unsigned int port, unsigned int pin, int on)
+{
+ unsigned long mask = 1 << pin;
+
+ imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ddir(
+ unsigned int port, unsigned int pin, int out)
+{
+ unsigned long mask = 1 << pin;
+
+ imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gpr(
+ unsigned int port, unsigned int pin, int af)
+{
+ unsigned long mask = 1 << pin;
+
+ imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gius(
+ unsigned int port, unsigned int pin, int inuse)
+{
+ unsigned long mask = 1 << pin;
+
+ imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ocr(
+ unsigned int port, unsigned int pin, unsigned int ocr)
+{
+ unsigned long shift = (pin & 0xf) << 1;
+ unsigned long mask = 3 << shift;
+ unsigned long value = ocr << shift;
+ unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
+
+ imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfa(
+ unsigned int port, unsigned int pin, unsigned int aout)
+{
+ unsigned long shift = (pin & 0xf) << 1;
+ unsigned long mask = 3 << shift;
+ unsigned long value = aout << shift;
+ unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
+
+ imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfb(
+ unsigned int port, unsigned int pin, unsigned int bout)
+{
+ unsigned long shift = (pin & 0xf) << 1;
+ unsigned long mask = 3 << shift;
+ unsigned long value = bout << shift;
+ unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
+
+ imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+int mxc_gpio_mode(int gpio_mode)
+{
+ unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+ unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+ unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+ unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
+ unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
+
+ if (port >= imx_iomuxv1_numports)
+ return -EINVAL;
+
+ /* Pullup enable */
+ imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
+
+ /* Data direction */
+ imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
+
+ /* Primary / alternate function */
+ imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
+
+ /* use as gpio? */
+ imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
+
+ imx_iomuxv1_set_ocr(port, pin, ocr);
+
+ imx_iomuxv1_set_iconfa(port, pin, aout);
+
+ imx_iomuxv1_set_iconfb(port, pin, bout);
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
+{
+ size_t i;
+ int ret;
+
+ for (i = 0; i < count; ++i) {
+ ret = mxc_gpio_mode(list[i]);
+
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ const char *label)
+{
+ size_t i;
+ int ret;
+
+ for (i = 0; i < count; ++i) {
+ unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+ ret = gpio_request(gpio, label);
+ if (ret)
+ goto err_gpio_request;
+ }
+
+ ret = imx_iomuxv1_setup_multiple(pin_list, count);
+ if (ret)
+ goto err_setup;
+
+ return 0;
+
+err_setup:
+ BUG_ON(i != count);
+
+err_gpio_request:
+ mxc_gpio_release_multiple_pins(pin_list, i);
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+ size_t i;
+
+ for (i = 0; i < count; ++i) {
+ unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+ gpio_free(gpio);
+ }
+}
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
+
+static int imx_iomuxv1_init(void)
+{
+#ifdef CONFIG_ARCH_MX1
+ if (cpu_is_mx1()) {
+ imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
+ imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
+ } else
+#endif
+#ifdef CONFIG_MACH_MX21
+ if (cpu_is_mx21()) {
+ imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
+ imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
+ } else
+#endif
+#ifdef CONFIG_MACH_MX27
+ if (cpu_is_mx27()) {
+ imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
+ imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
+ } else
+#endif
+ return -ENODEV;
+
+ return 0;
+}
+pure_initcall(imx_iomuxv1_init);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 844567ee..c1ce51a 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -30,9 +30,15 @@
#include <asm/mach/time.h>
#include <mach/common.h>
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
/* defines common for all i.MX */
#define MXC_TCTL 0x00
-#define MXC_TCTL_TEN (1 << 0)
+#define MXC_TCTL_TEN (1 << 0) /* Enable module */
#define MXC_TPRER 0x04
/* MX1, MX21, MX27 */
@@ -47,8 +53,8 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35, MX25, MXC91231 */
-#define MX3_TCTL_WAITEN (1 << 3)
+/* MX31, MX35, MX25, MXC91231, MX5 */
+#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define MX3_TCTL_CLK_IPG (1 << 6)
#define MX3_TCTL_FRR (1 << 9)
#define MX3_IR 0x0c
@@ -57,6 +63,9 @@
#define MX3_TCN 0x24
#define MX3_TCMP 0x10
+#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2() (!timer_is_v1())
+
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
@@ -66,7 +75,7 @@
{
unsigned int tmp;
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
__raw_writel(0, timer_base + MX3_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +85,7 @@
static inline void gpt_irq_enable(void)
{
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
__raw_writel(1<<0, timer_base + MX3_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -86,11 +95,13 @@
static void gpt_irq_acknowledge(void)
{
- if (cpu_is_mx1())
- __raw_writel(0, timer_base + MX1_2_TSTAT);
- if (cpu_is_mx2())
- __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v1()) {
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ else
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+ timer_base + MX1_2_TSTAT);
+ } else if (timer_is_v2())
__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
}
@@ -117,7 +128,7 @@
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
clocksource_mxc.read = mx3_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +191,7 @@
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
timer_base + MX3_TCMP);
else
@@ -233,7 +244,7 @@
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
tstat = __raw_readl(timer_base + MX3_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +275,7 @@
{
unsigned int c = clk_get_rate(timer_clk);
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
clockevent_mxc.set_next_event = mx3_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +307,7 @@
__raw_writel(0, timer_base + MXC_TCTL);
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
- if (cpu_is_mx3() || cpu_is_mx25())
+ if (timer_is_v2())
tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
new file mode 100644
index 0000000..afa6709
--- /dev/null
+++ b/arch/arm/plat-mxc/tzic.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+
+/*
+ *****************************************
+ * TZIC Registers *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL 0x0000 /* Control register */
+#define TZIC_INTTYPE 0x0004 /* Controller Type register */
+#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
+#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
+#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
+#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
+#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
+#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
+#define TZIC_PND0 0x0D00 /* Pending Register 0 */
+#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */
+#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
+#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
+#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+
+/**
+ * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
+ *
+ * @param irq interrupt source number
+ */
+static void tzic_mask_irq(unsigned int irq)
+{
+ int index, off;
+
+ index = irq >> 5;
+ off = irq & 0x1F;
+ __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
+}
+
+/**
+ * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
+ *
+ * @param irq interrupt source number
+ */
+static void tzic_unmask_irq(unsigned int irq)
+{
+ int index, off;
+
+ index = irq >> 5;
+ off = irq & 0x1F;
+ __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
+}
+
+static unsigned int wakeup_intr[4];
+
+/**
+ * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
+ *
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * disble as wake-up if equal to zero
+ *
+ * @return This function returns 0 on success.
+ */
+static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
+{
+ unsigned int index, off;
+
+ index = irq >> 5;
+ off = irq & 0x1F;
+
+ if (index > 3)
+ return -EINVAL;
+
+ if (enable)
+ wakeup_intr[index] |= (1 << off);
+ else
+ wakeup_intr[index] &= ~(1 << off);
+
+ return 0;
+}
+
+static struct irq_chip mxc_tzic_chip = {
+ .name = "MXC_TZIC",
+ .ack = tzic_mask_irq,
+ .mask = tzic_mask_irq,
+ .unmask = tzic_unmask_irq,
+ .set_wake = tzic_set_wake_irq,
+};
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+ int i;
+
+ tzic_base = irqbase;
+ /* put the TZIC into the reset value with
+ * all interrupts disabled
+ */
+ i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+ __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+ __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+ __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+ /* disable all interrupts */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+ /* all IRQ no FIQ Warning :: No selection */
+
+ for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+ set_irq_chip(i, &mxc_tzic_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @param is_idle 1 if called in idle loop (ENSET0 register);
+ * 0 to be used when called from low power entry
+ * @return 0 if successful; non-zero otherwise
+ */
+int tzic_enable_wake(int is_idle)
+{
+ unsigned int i, v;
+
+ __raw_writel(1, tzic_base + TZIC_DSMINT);
+ if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+ return -EAGAIN;
+
+ for (i = 0; i < 4; i++) {
+ v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
+ __raw_writel(v, TZIC_WAKEUP0(i));
+ }
+
+ return 0;
+}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 62f18ad..fa7cb3a 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -49,24 +49,17 @@
static void nmdk_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
- unsigned long flags;
-
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- /* enable interrupts -- and count current value? */
- raw_local_irq_save(flags);
+ /* count current value? */
writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
- raw_local_irq_restore(flags);
break;
case CLOCK_EVT_MODE_ONESHOT:
BUG(); /* Not supported, yet */
/* FALLTHROUGH */
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
- /* disable irq */
- raw_local_irq_save(flags);
writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
- raw_local_irq_restore(flags);
break;
case CLOCK_EVT_MODE_RESUME:
break;
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
deleted file mode 100644
index 9e9d028..0000000
--- a/arch/arm/plat-s3c/Kconfig
+++ /dev/null
@@ -1,215 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C
- bool
- depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
- default y
- select NO_IOPORT
- help
- Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
- bool
- help
- Selected if there is an S3C2410 (or register compatible) serial
- low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
- bool
- help
- Selected if there is an S3C2440 (or register compatible) serial
- low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
- bool "S3C Initialisation watchdog"
- depends on S3C2410_WATCHDOG
- help
- Say y to enable the watchdog during the kernel decompression
- stage. If the kernel fails to uncompress, then the watchdog
- will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
- bool "S3C Reboot on decompression error"
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
- bool "Force UART FIFO on during boot process"
- default y
- help
- Say Y here to force the UART FIFOs on during the kernel
- uncompressor
-
-comment "Power management"
-
-config S3C2410_PM_DEBUG
- bool "S3C2410 PM Suspend debug"
- depends on PM
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
- for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
- bool "SMDK LED suspend/resume debugging"
- depends on PM && (MACH_SMDK6410)
- help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
- for debugging of the state of the suspend and resume process.
-
- Note, this currently only works for S3C64XX based SMDK boards.
-
-config S3C2410_PM_CHECK
- bool "S3C2410 PM Suspend Memory CRC"
- depends on PM && CRC32
- help
- Enable the PM code's memory area checksum over sleep. This option
- will generate CRCs of all blocks of memory, and store them before
- going to sleep. The blocks are then checked on resume for any
- errors.
-
- Note, this can take several seconds depending on memory size
- and CPU speed.
-
- See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_PM_CHECK_CHUNKSIZE
- int "S3C2410 PM Suspend CRC Chunksize (KiB)"
- depends on PM && S3C2410_PM_CHECK
- default 64
- help
- Set the chunksize in Kilobytes of the CRC for checking memory
- corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but wil identify any
- faults with better precision.
-
- See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C_LOWLEVEL_UART_PORT
- int "S3C UART to use for low-level messages"
- default 0
- help
- Choice of which UART port to use for the low-level messages,
- such as the `Uncompressing...` at start time. The value of
- this configuration should be between zero and two. The port
- must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
- int "Space between gpio banks"
- default 0
- help
- Add a number of spare GPIO entries between each bank for debugging
- purposes. This allows any problems where an counter overflows from
- one bank to another to be caught, at the expense of using a little
- more memory.
-
-config S3C_GPIO_TRACK
- bool
- help
- Internal configuration option to enable the s3c specific gpio
- chip tracking if the platform requires it.
-
-config S3C_GPIO_PULL_UPDOWN
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_DOWN
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
- bool
- help
- Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_CFG_S3C24XX
- bool
- help
- Internal configuration to enable S3C24XX style GPIO configuration
- functions.
-
-config S3C_GPIO_CFG_S3C64XX
- bool
- help
- Internal configuration to enable S3C64XX style GPIO configuration
- functions.
-
-config S5P_GPIO_CFG_S5PC1XX
- bool
- help
- Internal configuration to enable S5PC1XX style GPIO configuration
- functions.
-
-# DMA
-
-config S3C_DMA
- bool
- help
- Internal configuration for S3C DMA core
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
- bool
- help
- Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
- bool
- help
- Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
- bool
- help
- Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_I2C1
- bool
- help
- Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_FB
- bool
- help
- Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
- bool
- help
- Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
- bool
- help
- Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_NAND
- bool
- help
- Compile in platform device definition for NAND controller
-
-endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
deleted file mode 100644
index 50444da..0000000
--- a/arch/arm/plat-s3c/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# arch/arm/plat-s3c/Makefile
-#
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for all Samsung SoCs
-
-obj-y += init.o
-obj-y += time.o
-obj-y += clock.o
-obj-y += pwm-clock.o
-obj-y += gpio.o
-obj-y += gpio-config.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA) += dma.o
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += pm-gpio.o
-obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM) += pwm.o
-
-# devices
-
-obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
-obj-y += dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
-obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 342647e..6e93ef8 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -14,6 +14,28 @@
if PLAT_S3C24XX
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+ bool
+ help
+ Selected if there is an S3C2410 (or register compatible) serial
+ low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+ bool
+ help
+ Selected if there is an S3C2440 (or register compatible) serial
+ low-level implementation needed
+
# code that is shared between a number of the s3c24xx implementations
config S3C2410_CLOCK
@@ -27,46 +49,6 @@
help
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-config CPU_S3C244X
- bool
- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
- default y
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -74,7 +56,6 @@
Support for exporting the PWM timer blocks via the pwm device
system.
-
# gpio configurations
config S3C24XX_GPIO_EXTRA
@@ -117,13 +98,6 @@
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
-config S3C24XX_ADC
- bool "ADC common driver support"
- help
- Core support for the ADC block found in the S3C24XX SoC systems
- for drivers such as the touchscreen and hwmon to use to share
- this resource.
-
# SPI default pin configuration code
config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 5dee8c1..c2237c4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,20 +25,12 @@
# Architecture dependant builds
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
-obj-$(CONFIG_S3C24XX_ADC) += adc.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index ac061a1..cf97caa 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -161,14 +161,18 @@
/* external clock definitions */
+static struct clk_ops dclk_ops = {
+ .set_parent = s3c24xx_dclk_setparent,
+ .set_rate = s3c24xx_set_dclk_rate,
+ .round_rate = s3c24xx_round_dclk_rate,
+};
+
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
+ .ops = &dclk_ops,
};
struct clk s3c24xx_dclk1 = {
@@ -176,19 +180,21 @@
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
+ .ops = &dclk_ops,
+};
+
+static struct clk_ops clkout_ops = {
+ .set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
.id = -1,
- .set_parent = s3c24xx_clkout_setparent,
+ .ops = &clkout_ops,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
.id = -1,
- .set_parent = s3c24xx_clkout_setparent,
+ .ops = &clkout_ops,
};
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd9..9ca64df 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,9 +49,7 @@
#include <plat/s3c2400.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
-#include "s3c244x.h"
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
+#include <plat/s3c244x.h>
#include <plat/s3c2443.h>
/* table of supported CPUs */
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a3..8c6de1c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -32,6 +32,7 @@
#include <plat/regs-serial.h>
#include <plat/udc.h>
+#include <plat/mci.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -112,34 +113,6 @@
},
};
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {
@@ -185,9 +158,27 @@
}
/* Touchscreen */
+
+static struct resource s3c_ts_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+
+};
+
struct platform_device s3c_device_ts = {
.name = "s3c2410-ts",
.id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
};
EXPORT_SYMBOL(s3c_device_ts);
@@ -379,6 +370,18 @@
EXPORT_SYMBOL(s3c_device_sdi);
+void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+ struct s3c24xx_mci_pdata *npd;
+
+ npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory to copy pdata", __func__);
+
+ s3c_device_sdi.dev.platform_data = npd;
+}
+
+
/* SPI (0) */
static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f0ea794..93827b3 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -33,7 +33,7 @@
#include <mach/dma.h>
#include <mach/map.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/regs-dma.h>
/* io map for dma */
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961..4f0f11a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/pm.h>
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
similarity index 94%
rename from arch/arm/plat-s3c/include/plat/audio-simtec.h
rename to arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
index 53a9365..de5e88f 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 36aaa10..2ac2b21 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -40,4 +40,13 @@
unsigned short vdd);
};
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
#endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853b..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
deleted file mode 100644
index 451a23a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
similarity index 72%
rename from arch/arm/plat-s3c24xx/s3c244x.h
rename to arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 6aab5ea..307248d 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -23,3 +23,15 @@
#define s3c244x_init_uarts NULL
#define s3c244x_map_io NULL
#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
deleted file mode 100644
index e6da87a..0000000
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-# Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-config PLAT_S3C64XX
- bool
- depends on ARCH_S3C64XX
- default y
- select CPU_V6
- select PLAT_S3C
- select ARM_VIC
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
- select S3C_DEV_NAND
- select USB_ARCH_HAS_OHCI
- help
- Base platform code for any Samsung S3C64XX device
-
-if PLAT_S3C64XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S3C6400_INIT
- bool
- help
- Common initialisation code for the S3C6400 that is shared
- by other CPUs in the series, such as the S3C6410.
-
-config CPU_S3C6400_CLOCK
- bool
- help
- Common clock support code for the S3C6400 that is shared
- by other CPUs in the series, such as the S3C6410.
-
-config S3C64XX_DMA
- bool "S3C64XX DMA"
- select S3C_DMA
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
- bool
- default y
- help
- Common setup code for i2c bus 0.
-
- Note, currently since i2c0 is always compiled, this setup helper
- is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
- bool
- help
- Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for S3C64XX SDHCI GPIO configurations
-
-endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
deleted file mode 100644
index b85b435..0000000
--- a/arch/arm/plat-s3c64xx/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-# arch/arm/plat-s3c64xx/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += dev-uart.o
-obj-y += cpu.o
-obj-y += irq.o
-obj-y += irq-eint.o
-obj-y += clock.o
-obj-y += gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_PM) += irq-pm.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA) += dma.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
deleted file mode 100644
index 7a36e89..0000000
--- a/arch/arm/plat-s3c64xx/clock.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-sys.h>
-#include <plat/regs-clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_h2 = {
- .name = "hclk2",
- .id = -1,
- .rate = 0,
-};
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S3C64XX_OTHERS);
- if (enable)
- val |= S3C64XX_OTHERS_USBMASK;
- else
- val &= ~S3C64XX_OTHERS_USBMASK;
-
- __raw_writel(val, S3C64XX_OTHERS);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "nand",
- .id = -1,
- .parent = &clk_h,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_TSADC,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIC,
- }, {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI1,
- }, {
- .name = "48m",
- .id = 0,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
- }, {
- .name = "48m",
- .id = 1,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
- }, {
- .name = "48m",
- .id = 2,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
- }, {
- .name = "dma0",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA0,
- }, {
- .name = "dma1",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA1,
- },
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_LCD,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_GPIO,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_UHOST,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_PWM,
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART3,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_WDT,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_AC97,
- }
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_h2,
-};
-
-void __init s3c64xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
deleted file mode 100644
index a21a88f..0000000
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- * Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/gpio.h>
-
-#include <plat/devs.h>
-#include <plat/audio.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-cfg.h>
-
-static struct resource s3c64xx_iis0_resource[] = {
- [0] = {
- .start = S3C64XX_PA_IIS0,
- .end = S3C64XX_PA_IIS0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device s3c64xx_device_iis0 = {
- .name = "s3c64xx-iis",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource),
- .resource = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
- [0] = {
- .start = S3C64XX_PA_IIS1,
- .end = S3C64XX_PA_IIS1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device s3c64xx_device_iis1 = {
- .name = "s3c64xx-iis",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource),
- .resource = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
- [0] = {
- .start = S3C64XX_PA_IISV4,
- .end = S3C64XX_PA_IISV4 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
- .name = "s3c64xx-iis-v4",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
- .resource = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
- break;
- case 1:
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
- break;
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
- [0] = {
- .start = S3C64XX_PA_PCM0,
- .end = S3C64XX_PA_PCM0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM0_TX,
- .end = DMACH_PCM0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM0_RX,
- .end = DMACH_PCM0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
- .cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource),
- .resource = s3c64xx_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm0_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
- [0] = {
- .start = S3C64XX_PA_PCM1,
- .end = S3C64XX_PA_PCM1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM1_TX,
- .end = DMACH_PCM1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM1_RX,
- .end = DMACH_PCM1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
- .cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource),
- .resource = s3c64xx_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm1_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
deleted file mode 100644
index 7785604..0000000
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/gpio.h>
-#include <mach/gpio-core.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank GPIOs Style SlpCon ExtInt Group
- * A 8 4Bit Yes 1
- * B 7 4Bit Yes 1
- * C 8 4Bit Yes 2
- * D 5 4Bit Yes 3
- * E 5 4Bit Yes None
- * F 16 2Bit Yes 4 [1]
- * G 7 4Bit Yes 5
- * H 10 4Bit[2] Yes 6
- * I 16 2Bit Yes None
- * J 12 2Bit Yes None
- * K 16 4Bit[2] No None
- * L 15 4Bit[2] No None
- * M 6 4Bit No IRQ_EINT
- * N 16 2Bit No IRQ_EINT
- * O 16 2Bit Yes 7
- * P 15 2Bit Yes 8
- * Q 9 2Bit Yes 9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-#define OFF_GPCON (0x00)
-#define OFF_GPDAT (0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while(0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
-
- con = __raw_readl(base + OFF_GPCON);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, base + OFF_GPCON);
-
- gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
- unsigned long dat;
-
- con = __raw_readl(base + OFF_GPCON);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + OFF_GPDAT);
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + OFF_GPDAT);
- __raw_writel(con, base + OFF_GPCON);
- __raw_writel(dat, base + OFF_GPDAT);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
-*/
-
-static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
-
- if (offset > 7)
- offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, regcon);
-
- gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
- return 0;
-
-}
-
-static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- void __iomem *regcon = base;
- unsigned long con;
- unsigned long dat;
-
- if (offset > 7)
- offset -= 8;
- else
- regcon -= 4;
-
- con = __raw_readl(regcon);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + OFF_GPDAT);
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + OFF_GPDAT);
- __raw_writel(con, regcon);
- __raw_writel(dat, base + OFF_GPDAT);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
- .cfg_eint = 7,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
- return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
- {
- .base = S3C64XX_GPA_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPA(0),
- .ngpio = S3C64XX_GPIO_A_NR,
- .label = "GPA",
- },
- }, {
- .base = S3C64XX_GPB_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPB(0),
- .ngpio = S3C64XX_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .base = S3C64XX_GPC_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPC(0),
- .ngpio = S3C64XX_GPIO_C_NR,
- .label = "GPC",
- },
- }, {
- .base = S3C64XX_GPD_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPD(0),
- .ngpio = S3C64XX_GPIO_D_NR,
- .label = "GPD",
- },
- }, {
- .base = S3C64XX_GPE_BASE,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPE(0),
- .ngpio = S3C64XX_GPIO_E_NR,
- .label = "GPE",
- },
- }, {
- .base = S3C64XX_GPG_BASE,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPG(0),
- .ngpio = S3C64XX_GPIO_G_NR,
- .label = "GPG",
- },
- }, {
- .base = S3C64XX_GPM_BASE,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPM(0),
- .ngpio = S3C64XX_GPIO_M_NR,
- .label = "GPM",
- .to_irq = s3c64xx_gpio2int_gpm,
- },
- },
-};
-
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
- return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
- {
- .base = S3C64XX_GPH_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0111,
- .chip = {
- .base = S3C64XX_GPH(0),
- .ngpio = S3C64XX_GPIO_H_NR,
- .label = "GPH",
- },
- }, {
- .base = S3C64XX_GPK_BASE + 0x4,
- .config = &gpio_4bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPK(0),
- .ngpio = S3C64XX_GPIO_K_NR,
- .label = "GPK",
- },
- }, {
- .base = S3C64XX_GPL_BASE + 0x4,
- .config = &gpio_4bit_cfg_eint0011,
- .chip = {
- .base = S3C64XX_GPL(0),
- .ngpio = S3C64XX_GPIO_L_NR,
- .label = "GPL",
- .to_irq = s3c64xx_gpio2int_gpl,
- },
- },
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
- .cfg_eint = 2,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
- .cfg_eint = 3,
- .set_config = s3c_gpio_setcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
- return IRQ_EINT(0) + pin;
-}
-
-static struct s3c_gpio_chip gpio_2bit[] = {
- {
- .base = S3C64XX_GPF_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPF(0),
- .ngpio = S3C64XX_GPIO_F_NR,
- .label = "GPF",
- },
- }, {
- .base = S3C64XX_GPI_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPI(0),
- .ngpio = S3C64XX_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .base = S3C64XX_GPJ_BASE,
- .config = &gpio_2bit_cfg_noint,
- .chip = {
- .base = S3C64XX_GPJ(0),
- .ngpio = S3C64XX_GPIO_J_NR,
- .label = "GPJ",
- },
- }, {
- .base = S3C64XX_GPN_BASE,
- .config = &gpio_2bit_cfg_eint10,
- .chip = {
- .base = S3C64XX_GPN(0),
- .ngpio = S3C64XX_GPIO_N_NR,
- .label = "GPN",
- .to_irq = s3c64xx_gpio2int_gpn,
- },
- }, {
- .base = S3C64XX_GPO_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPO(0),
- .ngpio = S3C64XX_GPIO_O_NR,
- .label = "GPO",
- },
- }, {
- .base = S3C64XX_GPP_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPP(0),
- .ngpio = S3C64XX_GPIO_P_NR,
- .label = "GPP",
- },
- }, {
- .base = S3C64XX_GPQ_BASE,
- .config = &gpio_2bit_cfg_eint11,
- .chip = {
- .base = S3C64XX_GPQ(0),
- .ngpio = S3C64XX_GPIO_Q_NR,
- .label = "GPQ",
- },
- },
-};
-
-static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
- chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
- chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
- chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
- chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
- int nr_chips,
- void (*fn)(struct s3c_gpio_chip *))
-{
- for (; nr_chips > 0; nr_chips--, chips++) {
- if (fn)
- (fn)(chips);
- s3c_gpiolib_add(chips);
- }
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
- s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
- s3c64xx_gpiolib_add_4bit);
-
- s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
- s3c64xx_gpiolib_add_4bit2);
-
- s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
- s3c64xx_gpiolib_add_2bit);
-
- return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
deleted file mode 100644
index 8f76a1e..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
- struct s3c64xx_dma_buff *next;
-
- void *pw;
- struct pl080s_lli *lli;
- dma_addr_t lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
- unsigned char number; /* number of this dma channel */
- unsigned char in_use; /* channel allocated */
- unsigned char bit; /* bit for enable/disable/etc */
- unsigned char hw_width;
- unsigned char peripheral;
-
- unsigned int flags;
- enum s3c2410_dmasrc source;
-
-
- dma_addr_t dev_addr;
-
- struct s3c2410_dma_client *client;
- struct s3c64xx_dmac *dmac; /* pointer to controller */
-
- void __iomem *regs;
-
- /* cdriver callbacks */
- s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
- s3c2410_dma_opfn_t op_fn; /* channel op callback */
-
- /* buffer list and information */
- struct s3c64xx_dma_buff *curr; /* current dma buffer */
- struct s3c64xx_dma_buff *next; /* next buffer to load */
- struct s3c64xx_dma_buff *end; /* end of queue */
-
- /* note, when channel is running in circular mode, curr is the
- * first buffer enqueued, end is the last and curr is where the
- * last buffer-done event is set-at. The buffers are not freed
- * and the last buffer hardware descriptor points back to the
- * first.
- */
-};
-
-#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
deleted file mode 100644
index 8dc5b6d..0000000
--- a/arch/arm/plat-s3c64xx/irq.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
- generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
- u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
- reg &= 0x1f; /* mask out pending interrupts */
- reg &= ~(1 << (irq - IRQ_TIMER0));
- __raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
- u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
- reg &= 0x1f; /* mask out pending interrupts */
- reg |= 1 << (irq - IRQ_TIMER0);
- __raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
- u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
- reg &= 0x1f;
- reg |= (1 << 5) << (irq - IRQ_TIMER0);
- __raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
- .name = "s3c-timer",
- .mask = s3c_irq_timer_mask,
- .unmask = s3c_irq_timer_unmask,
- .ack = s3c_irq_timer_ack,
-};
-
-struct uart_irq {
- void __iomem *regs;
- unsigned int base_irq;
- unsigned int parent_irq;
-};
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct uart_irq uart_irqs[] = {
- [0] = {
- .regs = S3C_VA_UART0,
- .base_irq = IRQ_S3CUART_BASE0,
- .parent_irq = IRQ_UART0,
- },
- [1] = {
- .regs = S3C_VA_UART1,
- .base_irq = IRQ_S3CUART_BASE1,
- .parent_irq = IRQ_UART1,
- },
- [2] = {
- .regs = S3C_VA_UART2,
- .base_irq = IRQ_S3CUART_BASE2,
- .parent_irq = IRQ_UART2,
- },
- [3] = {
- .regs = S3C_VA_UART3,
- .base_irq = IRQ_S3CUART_BASE3,
- .parent_irq = IRQ_UART3,
- },
-};
-
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
- struct uart_irq *uirq = get_irq_chip_data(irq);
- return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
- return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
- u32 reg;
-
- reg = __raw_readl(regs + S3C64XX_UINTM);
- reg |= (1 << bit);
- __raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
- u32 reg;
-
- reg = __raw_readl(regs + S3C64XX_UINTM);
- reg |= (1 << bit);
- __raw_writel(reg, regs + S3C64XX_UINTM);
- __raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
- u32 reg;
-
- reg = __raw_readl(regs + S3C64XX_UINTM);
- reg &= ~(1 << bit);
- __raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
-
- __raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
- struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
- u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
- int base = uirq->base_irq;
-
- if (pend & (1 << 0))
- generic_handle_irq(base);
- if (pend & (1 << 1))
- generic_handle_irq(base + 1);
- if (pend & (1 << 2))
- generic_handle_irq(base + 2);
- if (pend & (1 << 3))
- generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
- .name = "s3c-uart",
- .mask = s3c_irq_uart_mask,
- .unmask = s3c_irq_uart_unmask,
- .mask_ack = s3c_irq_uart_maskack,
- .ack = s3c_irq_uart_ack,
-};
-
-static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
-{
- void __iomem *reg_base = uirq->regs;
- unsigned int irq;
- int offs;
-
- /* mask all interrupts at the start. */
- __raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
- for (offs = 0; offs < 3; offs++) {
- irq = uirq->base_irq + offs;
-
- set_irq_chip(irq, &s3c_irq_uart);
- set_irq_chip_data(irq, uirq);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
- int uart, irq;
-
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
- vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
-
- /* add the timer sub-irqs */
-
- set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
- set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
- set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
- set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
- set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
-
- for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
- set_irq_chip(irq, &s3c_irq_timer);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
- s3c64xx_uart_irq(&uart_irqs[uart]);
-}
-
-
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
deleted file mode 100644
index ffd56de..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 based common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
- .id = -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_fout_epll clk_epll
-
-struct clk_sources {
- unsigned int nr_sources;
- struct clk **sources;
-};
-
-struct clksrc_clk {
- struct clk clk;
- unsigned int mask;
- unsigned int shift;
-
- struct clk_sources *sources;
-
- unsigned int divider_shift;
- void __iomem *reg_divider;
-};
-
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
- .id = -1,
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clk_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .shift = S3C6400_CLKSRC_APLL_MOUT_SHIFT,
- .mask = S3C6400_CLKSRC_APLL_MOUT,
- .sources = &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clk_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .shift = S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
- .mask = S3C6400_CLKSRC_EPLL_MOUT,
- .sources = &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .shift = S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
- .mask = S3C6400_CLKSRC_MPLL_MOUT,
- .sources = &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv;
-
- /* divisor mask starts at bit0, so no need to shift */
- clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
- return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return parent;
-
- div = (parent / rate) - 1;
- if (div > armclk_mask)
- div = armclk_mask;
-
- return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (armclk_mask + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S3C_CLK_DIV0);
- val &= ~armclk_mask;
- val |= (div - 1);
- __raw_writel(val, S3C_CLK_DIV0);
-
- return 0;
-
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- .get_rate = s3c64xx_clk_arm_get_rate,
- .set_rate = s3c64xx_clk_arm_set_rate,
- .round_rate = s3c64xx_clk_arm_round_rate,
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
- rate /= 2;
-
- return rate;
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- .get_rate = s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_27m,
-};
-
-static struct clk_sources clkset_spi_mmc = {
- .sources = clkset_spi_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- &clk_27m,
-};
-
-static struct clk_sources clkset_irda = {
- .sources = clkset_irda_list,
- .nr_sources = ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- NULL
-};
-
-static struct clk_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
- &clk_48m,
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
-};
-
-static struct clk_sources clkset_uhost = {
- .sources = clkset_uhost_list,
- .nr_sources = ARRAY_SIZE(clkset_uhost_list),
-};
-
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
- return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv = __raw_readl(sclk->reg_divider);
-
- clkdiv >>= sclk->divider_shift;
- clkdiv &= 0xf;
- clkdiv++;
-
- rate /= clkdiv;
- return rate;
-}
-
-static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- void __iomem *reg = sclk->reg_divider;
- unsigned int div;
- u32 val;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
- if (div > 16)
- return -EINVAL;
-
- val = __raw_readl(reg);
- val &= ~(0xf << sclk->divider_shift);
- val |= (div - 1) << sclk->divider_shift;
- __raw_writel(val, reg);
-
- return 0;
-}
-
-static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- struct clk_sources *srcs = sclk->sources;
- u32 clksrc = __raw_readl(S3C_CLK_SRC);
- int src_nr = -1;
- int ptr;
-
- for (ptr = 0; ptr < srcs->nr_sources; ptr++)
- if (srcs->sources[ptr] == parent) {
- src_nr = ptr;
- break;
- }
-
- if (src_nr >= 0) {
- clksrc &= ~sclk->mask;
- clksrc |= src_nr << sclk->shift;
-
- __raw_writel(clksrc, S3C_CLK_SRC);
-
- clk->parent = parent;
- return 0;
- }
-
- return -EINVAL;
-}
-
-static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- rate = parent_rate;
- else {
- div = parent_rate / rate;
-
- if (div == 0)
- div = 1;
- if (div > 16)
- div = 16;
-
- rate = parent_rate / div;
- }
-
- return rate;
-}
-
-static struct clksrc_clk clk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_MMC0_SHIFT,
- .mask = S3C6400_CLKSRC_MMC0_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_MMC1_SHIFT,
- .mask = S3C6400_CLKSRC_MMC1_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .set_parent = s3c64xx_setparent_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_MMC2_SHIFT,
- .mask = S3C6400_CLKSRC_MMC2_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
- .clk = {
- .name = "usb-bus-host",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_UHOST_SHIFT,
- .mask = S3C6400_CLKSRC_UHOST_MASK,
- .sources = &clkset_uhost,
- .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_UART_SHIFT,
- .mask = S3C6400_CLKSRC_UART_MASK,
- .sources = &clkset_uart,
- .divider_shift = S3C6400_CLKDIV2_UART_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
- .clk = {
- .name = "spi-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_SPI0_SHIFT,
- .mask = S3C6400_CLKSRC_SPI0_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
- .clk = {
- .name = "spi-bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_SPI1_SHIFT,
- .mask = S3C6400_CLKSRC_SPI1_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
- .id = -1,
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
- .id = -1,
-};
-
-static struct clk clk_pcm_cd = {
- .name = "pcm_cdclk",
- .id = -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd0,
- [4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clksrc_clk clk_audio0 = {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO0_MASK,
- .sources = &clkset_audio0,
- .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_audio1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd1,
- [4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clksrc_clk clk_audio1 = {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO1_MASK,
- .sources = &clkset_audio1,
- .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
- .clk = {
- .name = "irda-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_IRDA,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = S3C6400_CLKSRC_IRDA_SHIFT,
- .mask = S3C6400_CLKSRC_IRDA_MASK,
- .sources = &clkset_irda,
- .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_camif_list[] = {
- &clk_h2,
-};
-
-static struct clk_sources clkset_camif = {
- .sources = clkset_camif_list,
- .nr_sources = ARRAY_SIZE(clkset_camif_list),
-};
-
-static struct clksrc_clk clk_camif = {
- .clk = {
- .name = "camera",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- .enable = s3c64xx_sclk_ctrl,
- .set_parent = s3c64xx_setparent_clksrc,
- .get_rate = s3c64xx_getrate_clksrc,
- .set_rate = s3c64xx_setrate_clksrc,
- .round_rate = s3c64xx_roundrate_clksrc,
- },
- .shift = 0,
- .mask = 0,
- .sources = &clkset_camif,
- .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
- .reg_divider = S3C_CLK_DIV0,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_mmc0,
- &clk_mmc1,
- &clk_mmc2,
- &clk_usbhost,
- &clk_uart_uclk1,
- &clk_spi0,
- &clk_spi1,
- &clk_audio0,
- &clk_audio1,
- &clk_irda,
- &clk_camif,
-};
-
-static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
-{
- struct clk_sources *srcs = clk->sources;
- u32 clksrc = __raw_readl(S3C_CLK_SRC);
-
- clksrc &= clk->mask;
- clksrc >>= clk->shift;
-
- if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
- printk(KERN_ERR "%s: bad source %d\n",
- clk->clk.name, clksrc);
- return;
- }
-
- clk->clk.parent = srcs->sources[clksrc];
-
- printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
- clk->clk.name, clk->clk.parent->name, clksrc,
- clk_get_rate(&clk->clk));
-}
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c6400_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk2;
- unsigned long pclk;
- unsigned long epll;
- unsigned long apll;
- unsigned long mpll;
- unsigned int ptr;
- u32 clkdiv0;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S3C_CLK_DIV0);
- printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- /* For now assume the mux always selects the crystal */
- clk_ext_xtal_mux.parent = xtal_clk;
-
- epll = s3c6400_get_epll(xtal);
- mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
- apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
- fclk = mpll;
-
- printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
- apll, mpll, epll);
-
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
- hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
- pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
- printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
- hclk2, hclk, pclk);
-
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
-
- clk_h2.rate = hclk2;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c6400_set_clksrc(init_parents[ptr]);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_pcm_cd,
- &clk_mout_epll.clk,
- &clk_mout_mpll.clk,
- &clk_dout_mpll,
- &clk_mmc0.clk,
- &clk_mmc1.clk,
- &clk_mmc2.clk,
- &clk_usbhost.clk,
- &clk_uart_uclk1.clk,
- &clk_spi0.clk,
- &clk_spi1.clk,
- &clk_audio0.clk,
- &clk_audio1.clk,
- &clk_irda.clk,
- &clk_camif.clk,
- &clk_arm,
-};
-
-/**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
- *
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
- *
- * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- armclk_mask = armclk_divlimit;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
deleted file mode 100644
index 6c28f39..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - CPU initialisation (common with other S3C64XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
new file mode 100644
index 0000000..d400a6a
--- /dev/null
+++ b/arch/arm/plat-s5p/Kconfig
@@ -0,0 +1,25 @@
+# arch/arm/plat-s5p/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+config PLAT_S5P
+ bool
+ depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
+ default y
+ select ARM_VIC
+ select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select SAMSUNG_GPIOLIB_4BIT
+ select S3C_GPIO_CFG_S3C64XX
+ select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select PLAT_SAMSUNG
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_VIC_TIMER
+ select SAMSUNG_IRQ_UART
+ help
+ Base platform code for Samsung's S5P series SoC.
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
new file mode 100644
index 0000000..a7c54b3
--- /dev/null
+++ b/arch/arm/plat-s5p/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/plat-s5p/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n := dummy.o
+obj- :=
+
+# Core files
+
+obj-y += dev-uart.o
+obj-y += cpu.o
+obj-y += clock.o
+obj-y += irq.o
+obj-y += setup-i2c0.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
new file mode 100644
index 0000000..aa96e33
--- /dev/null
+++ b/arch/arm/plat-s5p/clock.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/plat-s5p/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+static struct clk s5p_clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+ .name = "fout_mpll",
+ .id = -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+ .name = "fout_epll",
+ .id = -1,
+ .ctrlbit = (1 << 31),
+};
+
+/* ARM clock */
+struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .rate = 0,
+ .ctrlbit = 0,
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+struct clk clk_vpll = {
+ .name = "vpll",
+ .id = -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+ con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static struct clk *s5p_clks[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_48m,
+ &s5p_clk_27m,
+ &clk_fout_apll,
+ &clk_fout_mpll,
+ &clk_fout_epll,
+ &clk_arm,
+ &clk_vpll,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+ int ret;
+
+ clk_ext_xtal_mux.rate = xtal_freq;
+
+ ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register s5p clocks\n");
+}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
new file mode 100644
index 0000000..f92e5de
--- /dev/null
+++ b/arch/arm/plat-s5p/cpu.c
@@ -0,0 +1,113 @@
+/* linux/arch/arm/plat-s5p/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6442.h>
+#include <plat/s5pv210.h>
+
+/* table of supported CPUs */
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = 0x56440100,
+ .idmask = 0xffffff00,
+ .map_io = s5p6440_map_io,
+ .init_clocks = s5p6440_init_clocks,
+ .init_uarts = s5p6440_init_uarts,
+ .init = s5p6440_init,
+ .name = name_s5p6440,
+ }, {
+ .idcode = 0x36442000,
+ .idmask = 0xffffff00,
+ .map_io = s5p6442_map_io,
+ .init_clocks = s5p6442_init_clocks,
+ .init_uarts = s5p6442_init_uarts,
+ .init = s5p6442_init,
+ .name = name_s5p6442,
+ }, {
+ .idcode = 0x43110000,
+ .idmask = 0xfffff000,
+ .map_io = s5pv210_map_io,
+ .init_clocks = s5pv210_init_clocks,
+ .init_uarts = s5pv210_init_uarts,
+ .init = s5pv210_init,
+ .name = name_s5pv210,
+ },
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s5p_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5P_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S5P_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S5P_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5P_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO,
+ .pfn = __phys_to_pfn(S5P_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+/* read cpu identification code */
+
+void __init s5p_init_io(struct map_desc *mach_desc,
+ int size, void __iomem *cpuid_addr)
+{
+ unsigned long idcode;
+
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ idcode = __raw_readl(cpuid_addr);
+ s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
new file mode 100644
index 0000000..a89331e
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -0,0 +1,139 @@
+/* linux/arch/arm/plat-s5p/dev-uart.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+ [0] = {
+ .start = S5P_PA_UART0,
+ .end = S5P_PA_UART0 + S5P_SZ_UART,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S5P_UART_RX0,
+ .end = IRQ_S5P_UART_RX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S5P_UART_TX0,
+ .end = IRQ_S5P_UART_TX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_S5P_UART_ERR0,
+ .end = IRQ_S5P_UART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s5p_uart1_resource[] = {
+ [0] = {
+ .start = S5P_PA_UART1,
+ .end = S5P_PA_UART1 + S5P_SZ_UART,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S5P_UART_RX1,
+ .end = IRQ_S5P_UART_RX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S5P_UART_TX1,
+ .end = IRQ_S5P_UART_TX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_S5P_UART_ERR1,
+ .end = IRQ_S5P_UART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5p_uart2_resource[] = {
+ [0] = {
+ .start = S5P_PA_UART2,
+ .end = S5P_PA_UART2 + S5P_SZ_UART,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S5P_UART_RX2,
+ .end = IRQ_S5P_UART_RX2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S5P_UART_TX2,
+ .end = IRQ_S5P_UART_TX2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_S5P_UART_ERR2,
+ .end = IRQ_S5P_UART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+ [0] = {
+ .start = S5P_PA_UART3,
+ .end = S5P_PA_UART3 + S5P_SZ_UART,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S5P_UART_RX3,
+ .end = IRQ_S5P_UART_RX3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S5P_UART_TX3,
+ .end = IRQ_S5P_UART_TX3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = IRQ_S5P_UART_ERR3,
+ .end = IRQ_S5P_UART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s5p_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart0_resource),
+ },
+ [1] = {
+ .resources = s5p_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart1_resource),
+ },
+ [2] = {
+ .resources = s5p_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart2_resource),
+ },
+ [3] = {
+ .resources = s5p_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s5p_uart3_resource),
+ },
+};
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
new file mode 100644
index 0000000..42e757f
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -0,0 +1,90 @@
+/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_IRQS_H
+#define __ASM_PLAT_S5P_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET (32)
+
+#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE S5P_IRQ(0)
+#define S5P_VIC1_BASE S5P_IRQ(32)
+#define S5P_VIC2_BASE S5P_IRQ(64)
+#define S5P_VIC3_BASE S5P_IRQ(96)
+
+#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE S5P_VIC0_BASE
+#define IRQ_VIC1_BASE S5P_VIC1_BASE
+#define IRQ_VIC2_BASE S5P_VIC2_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0 (16)
+#define IRQ_S5P_UART_BASE1 (20)
+#define IRQ_S5P_UART_BASE2 (24)
+#define IRQ_S5P_UART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+
+#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
+
+#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+
+#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
new file mode 100644
index 0000000..1482852
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0 (S3C_VA_UART + 0x0)
+#define S5P_VA_UART1 (S3C_VA_UART + 0x400)
+#define S5P_VA_UART2 (S3C_VA_UART + 0x800)
+#define S5P_VA_UART3 (S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET (0x400)
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+#define VA_VIC2 VA_VIC(2)
+#define VA_VIC3 VA_VIC(3)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
new file mode 100644
index 0000000..d48325b
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -0,0 +1,83 @@
+/* arch/arm/plat-s5p/include/plat/pll.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P PLL code
+ *
+ * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PLL45XX_MDIV_MASK (0x3FF)
+#define PLL45XX_PDIV_MASK (0x3F)
+#define PLL45XX_SDIV_MASK (0x7)
+#define PLL45XX_MDIV_SHIFT (16)
+#define PLL45XX_PDIV_SHIFT (8)
+#define PLL45XX_SDIV_SHIFT (0)
+
+#include <asm/div64.h>
+
+enum pll45xx_type_t {
+ pll_4500,
+ pll_4502,
+ pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+ enum pll45xx_type_t pll_type)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+ if (pll_type == pll_4508)
+ sdiv = sdiv - 1;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL90XX_MDIV_MASK (0xFF)
+#define PLL90XX_PDIV_MASK (0x3F)
+#define PLL90XX_SDIV_MASK (0x7)
+#define PLL90XX_KDIV_MASK (0xffff)
+#define PLL90XX_MDIV_SHIFT (16)
+#define PLL90XX_PDIV_SHIFT (8)
+#define PLL90XX_SDIV_SHIFT (0)
+#define PLL90XX_KDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+ u32 pll_con, u32 pll_conk)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+ kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+ /* We need to multiple baseclk by mdiv (the integer part) and kdiv
+ * which is in 2^16ths, so shift mdiv up (does not overflow) and
+ * add kdiv before multiplying. The use of tmp is to avoid any
+ * overflows before shifting bac down into result when multipling
+ * by the mdiv and kdiv pair.
+ */
+
+ tmp = baseclk;
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
new file mode 100644
index 0000000..56fb8b4
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_48m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+
+extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
new file mode 100644
index 0000000..a4cd75a
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s5p/include/plat/s5p6440.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p6440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ /* Common init code for S5P6440 related SoCs */
+
+extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6440_register_clocks(void);
+extern void s5p6440_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern int s5p6440_init(void);
+extern void s5p6440_init_irq(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+#define s5p6440_init_uarts s5p6440_common_init_uarts
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p6440_init NULL
+#endif
+
+/* S5P6440 timer */
+
+extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
new file mode 100644
index 0000000..7b88013
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6442.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5p6442.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p6442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6442 related SoCs */
+
+extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6442_register_clocks(void);
+extern void s5p6442_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6442
+
+extern int s5p6442_init(void);
+extern void s5p6442_init_irq(void);
+extern void s5p6442_map_io(void);
+extern void s5p6442_init_clocks(int xtal);
+
+#define s5p6442_init_uarts s5p6442_common_init_uarts
+
+#else
+#define s5p6442_init_clocks NULL
+#define s5p6442_init_uarts NULL
+#define s5p6442_map_io NULL
+#define s5p6442_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
new file mode 100644
index 0000000..6c93a0c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv210.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
new file mode 100644
index 0000000..25e1eb6
--- /dev/null
+++ b/arch/arm/plat-s5p/irq.c
@@ -0,0 +1,72 @@
+/* arch/arm/plat-s5p/irq.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <linux/serial_core.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+
+/*
+ * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct s3c_uart_irq uart_irqs[] = {
+ [0] = {
+ .regs = S5P_VA_UART0,
+ .base_irq = IRQ_S5P_UART_BASE0,
+ .parent_irq = IRQ_UART0,
+ },
+ [1] = {
+ .regs = S5P_VA_UART1,
+ .base_irq = IRQ_S5P_UART_BASE1,
+ .parent_irq = IRQ_UART1,
+ },
+ [2] = {
+ .regs = S5P_VA_UART2,
+ .base_irq = IRQ_S5P_UART_BASE2,
+ .parent_irq = IRQ_UART2,
+ },
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+ [3] = {
+ .regs = S5P_VA_UART3,
+ .base_irq = IRQ_S5P_UART_BASE3,
+ .parent_irq = IRQ_UART3,
+ },
+#endif
+};
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+ int irq;
+
+ /* initialize the VICs */
+ for (irq = 0; irq < num_vic; irq++)
+ vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+
+ s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+ s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+ s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+ s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+ s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+ s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/plat-s5p/setup-i2c0.c
new file mode 100644
index 0000000..67a66e0
--- /dev/null
+++ b/arch/arm/plat-s5p/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5p/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index b7b9e91..c7ccdf2 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -11,6 +11,9 @@
select ARM_VIC
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_UART
+ select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
index 26c21d8..387f231 100644
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -64,25 +64,13 @@
.rate = 54000000,
};
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 0;
-}
-
-static int clk_dummy_enable(struct clk *clk, int enable)
-{
- return 0;
-}
-
struct clk clk_hd0 = {
.name = "hclkd0",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
- .enable = clk_dummy_enable,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_pd0 = {
@@ -91,8 +79,7 @@
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
- .enable = clk_dummy_enable,
+ .ops = &clk_ops_def_setrate,
};
static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
@@ -686,6 +673,8 @@
static struct clk *clks[] __initdata = {
&clk_ext,
&clk_epll,
+ &clk_pd0,
+ &clk_hd0,
&clk_27m,
&clk_48m,
&clk_54m,
@@ -700,16 +689,8 @@
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
- clkp = s5pc100_init_clocks;
- size = ARRAY_SIZE(s5pc100_init_clocks);
-
- for (ptr = 0; ptr < size; ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
+ s3c_register_clocks(s5pc100_init_clocks,
+ ARRAY_SIZE(s5pc100_init_clocks));
clkp = s5pc100_init_clocks_disable;
size = ARRAY_SIZE(s5pc100_init_clocks_disable);
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
index f749bc5..586c95c 100644
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -143,32 +143,3 @@
.nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
},
};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
- .id = 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
- .id = 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
- .id = 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
- .id = 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
- &s3c24xx_uart_device0,
- &s3c24xx_uart_device1,
- &s3c24xx_uart_device2,
- &s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
index bba675d..a4f67e8 100644
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -16,7 +16,7 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
#include <plat/gpio-cfg-s5pc1xx.h>
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
index facb410..1ffc57a 100644
--- a/arch/arm/plat-s5pc1xx/gpiolib.c
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -17,8 +17,8 @@
#include <linux/gpio.h>
#include <mach/map.h>
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#include <plat/regs-gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index ef87363..409c8043 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -88,11 +88,11 @@
#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25)
+#define IRQ_TIMER0_VIC S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5PC1XX_IRQ_VIC0(25)
#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
@@ -171,8 +171,15 @@
#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
+#define IRQ_TIMER(x) (IRQ_SDMFIQ + 1 + (x))
+#define IRQ_TIMER0 IRQ_TIMER(0)
+#define IRQ_TIMER1 IRQ_TIMER(1)
+#define IRQ_TIMER2 IRQ_TIMER(2)
+#define IRQ_TIMER3 IRQ_TIMER(3)
+#define IRQ_TIMER4 IRQ_TIMER(4)
+
/* External interrupt */
-#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1)
+#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 6)
#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index c5cc86e..24dec4e 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -61,73 +61,10 @@
#define S5PC100_EPLL_MASK 0xffffffff
#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-/* CLKSRC0 */
-#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0)
-#define S5PC100_CLKSRC0_APLL_SHIFT (0)
-#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4)
-#define S5PC100_CLKSRC0_MPLL_SHIFT (4)
-#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8)
-#define S5PC100_CLKSRC0_EPLL_SHIFT (8)
-#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12)
-#define S5PC100_CLKSRC0_HPLL_SHIFT (12)
-#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16)
-#define S5PC100_CLKSRC0_AMMUX_SHIFT (16)
-#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20)
-#define S5PC100_CLKSRC0_HREF_SHIFT (20)
-#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24)
-#define S5PC100_CLKSRC0_ONENAND_SHIFT (24)
-
-
-/* CLKSRC1 */
-#define S5PC100_CLKSRC1_UART_MASK (0x1<<0)
-#define S5PC100_CLKSRC1_UART_SHIFT (0)
-#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4)
-#define S5PC100_CLKSRC1_SPI0_SHIFT (4)
-#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8)
-#define S5PC100_CLKSRC1_SPI1_SHIFT (8)
-#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12)
-#define S5PC100_CLKSRC1_SPI2_SHIFT (12)
-#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16)
-#define S5PC100_CLKSRC1_IRDA_SHIFT (16)
-#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20)
-#define S5PC100_CLKSRC1_UHOST_SHIFT (20)
-#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
+/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
+#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
-/* CLKSRC2 */
-#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0)
-#define S5PC100_CLKSRC2_MMC0_SHIFT (0)
-#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4)
-#define S5PC100_CLKSRC2_MMC1_SHIFT (4)
-#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8)
-#define S5PC100_CLKSRC2_MMC2_SHIFT (8)
-#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12)
-#define S5PC100_CLKSRC2_LCD_SHIFT (12)
-#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16)
-#define S5PC100_CLKSRC2_FIMC0_SHIFT (16)
-#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20)
-#define S5PC100_CLKSRC2_FIMC1_SHIFT (20)
-#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24)
-#define S5PC100_CLKSRC2_FIMC2_SHIFT (24)
-#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28)
-#define S5PC100_CLKSRC2_MIXER_SHIFT (28)
-
-/* CLKSRC3 */
-#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0)
-#define S5PC100_CLKSRC3_PWI_SHIFT (0)
-#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4)
-#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4)
-#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8)
-#define S5PC100_CLKSRC3_I2SD2_SHIFT (8)
-#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12)
-#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12)
-#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16)
-#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16)
-#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20)
-#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20)
-#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24)
-#define S5PC100_CLKSRC3_SPDIF_SHIFT (24)
-
/* CLKDIV0 */
#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
#define S5PC100_CLKDIV0_APLL_SHIFT (0)
@@ -140,7 +77,7 @@
#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
-/* CLKDIV1 */
+/* CLKDIV1 (OneNAND clock only used in one place, removed) */
#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
@@ -151,56 +88,12 @@
#define S5PC100_CLKDIV1_D1_SHIFT (12)
#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
-#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20)
-#define S5PC100_CLKDIV1_ONENAND_SHIFT (20)
#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
#define S5PC100_CLKDIV1_CAM_SHIFT (24)
-/* CLKDIV2 */
-#define S5PC100_CLKDIV2_UART_MASK (0x7<<0)
-#define S5PC100_CLKDIV2_UART_SHIFT (0)
-#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4)
-#define S5PC100_CLKDIV2_SPI0_SHIFT (4)
-#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8)
-#define S5PC100_CLKDIV2_SPI1_SHIFT (8)
-#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12)
-#define S5PC100_CLKDIV2_SPI2_SHIFT (12)
-#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16)
-#define S5PC100_CLKDIV2_IRDA_SHIFT (16)
-#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20)
-#define S5PC100_CLKDIV2_UHOST_SHIFT (20)
-
-/* CLKDIV3 */
-#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0)
-#define S5PC100_CLKDIV3_MMC0_SHIFT (0)
-#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4)
-#define S5PC100_CLKDIV3_MMC1_SHIFT (4)
-#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8)
-#define S5PC100_CLKDIV3_MMC2_SHIFT (8)
-#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12)
-#define S5PC100_CLKDIV3_LCD_SHIFT (12)
-#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16)
-#define S5PC100_CLKDIV3_FIMC0_SHIFT (16)
-#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20)
-#define S5PC100_CLKDIV3_FIMC1_SHIFT (20)
-#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24)
-#define S5PC100_CLKDIV3_FIMC2_SHIFT (24)
-#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28)
-#define S5PC100_CLKDIV3_HDMI_SHIFT (28)
-
-/* CLKDIV4 */
-#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0)
-#define S5PC100_CLKDIV4_PWI_SHIFT (0)
-#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4)
-#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4)
-#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8)
-#define S5PC100_CLKDIV4_I2SD2_SHIFT (8)
-#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12)
-#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12)
-#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16)
-#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16)
-#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20)
-#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20)
+/* CLKDIV2 => removed in clksrc update */
+/* CLKDIV3 => removed in clksrc update, or not needed */
+/* CLKDIV4 => removed in clksrc update, or not needed */
/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
#define S5PC100_CLKGATE_D00_INTC (1<<0)
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index e44fd04..bfc5248 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -20,87 +20,14 @@
#include <asm/hardware/vic.h>
#include <mach/map.h>
-#include <plat/regs-timer.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
#include <plat/cpu.h>
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
- generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
- s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
- u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
- reg &= 0x1f; /* mask out pending interrupts */
- reg &= ~(1 << (irq - IRQ_TIMER0));
- __raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
- u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
- reg &= 0x1f; /* mask out pending interrupts */
- reg |= 1 << (irq - IRQ_TIMER0);
- __raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
- u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
- reg &= 0x1f; /* mask out pending interrupts */
- reg |= (1 << 5) << (irq - IRQ_TIMER0);
- __raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
- .name = "s3c-timer",
- .mask = s3c_irq_timer_mask,
- .unmask = s3c_irq_timer_unmask,
- .ack = s3c_irq_timer_ack,
-};
-
-struct uart_irq {
- void __iomem *regs;
- unsigned int base_irq;
- unsigned int parent_irq;
-};
-
/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
*/
-static struct uart_irq uart_irqs[] = {
+static struct s3c_uart_irq uart_irqs[] = {
[0] = {
.regs = (void *)S3C_VA_UART0,
.base_irq = IRQ_S3CUART_BASE0,
@@ -123,113 +50,9 @@
},
};
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
- struct uart_irq *uirq = get_irq_chip_data(irq);
- return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
- return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP 0x30
-#define S3C64XX_UINTSP 0x34
-#define S3C64XX_UINTM 0x38
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
- u32 reg;
-
- reg = __raw_readl(regs + S3C64XX_UINTM);
- reg |= (1 << bit);
- __raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
- u32 reg;
-
- reg = __raw_readl(regs + S3C64XX_UINTM);
- reg |= (1 << bit);
- __raw_writel(reg, regs + S3C64XX_UINTM);
- __raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
- u32 reg;
-
- reg = __raw_readl(regs + S3C64XX_UINTM);
- reg &= ~(1 << bit);
- __raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
- void __iomem *regs = s3c_irq_uart_base(irq);
- unsigned int bit = s3c_irq_uart_bit(irq);
-
- __raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
- struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
- u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
- int base = uirq->base_irq;
-
- if (pend & (1 << 0))
- generic_handle_irq(base);
- if (pend & (1 << 1))
- generic_handle_irq(base + 1);
- if (pend & (1 << 2))
- generic_handle_irq(base + 2);
- if (pend & (1 << 3))
- generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
- .name = "s3c-uart",
- .mask = s3c_irq_uart_mask,
- .unmask = s3c_irq_uart_unmask,
- .mask_ack = s3c_irq_uart_maskack,
- .ack = s3c_irq_uart_ack,
-};
-
-static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
-{
- void __iomem *reg_base = uirq->regs;
- unsigned int irq;
- int offs;
-
- /* mask all interrupts at the start. */
- __raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
- for (offs = 0; offs < 3; offs++) {
- irq = uirq->base_irq + offs;
-
- set_irq_chip(irq, &s3c_irq_uart);
- set_irq_chip_data(irq, uirq);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
{
int i;
- int uart, irq;
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -240,20 +63,13 @@
/* add the timer sub-irqs */
- set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
- set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
- set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
- set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
- set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+ s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+ s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+ s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+ s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+ s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
- for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
- set_irq_chip(irq, &s3c_irq_timer);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
- s5pc1xx_uart_irq(&uart_irqs[uart]);
+ s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index b436d44..2bf6c57 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -29,6 +29,7 @@
#include <plat/regs-clock.h>
#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/devs.h>
@@ -51,23 +52,6 @@
#define clk_fout_mpll clk_mpll
#define clk_vclk_54m clk_54m
-struct clk_sources {
- unsigned int nr_sources;
- struct clk **sources;
-};
-
-struct clksrc_clk {
- struct clk clk;
- unsigned int mask;
- unsigned int shift;
-
- struct clk_sources *sources;
-
- unsigned int divider_shift;
- void __iomem *reg_divider;
- void __iomem *reg_source;
-};
-
/* APLL */
static struct clk clk_fout_apll = {
.name = "fout_apll",
@@ -80,7 +64,7 @@
[1] = &clk_fout_apll,
};
-static struct clk_sources clk_src_apll = {
+static struct clksrc_sources clk_src_apll = {
.sources = clk_src_apll_list,
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
@@ -90,10 +74,8 @@
.name = "mout_apll",
.id = -1,
},
- .shift = S5PC100_CLKSRC0_APLL_SHIFT,
- .mask = S5PC100_CLKSRC0_APLL_MASK,
.sources = &clk_src_apll,
- .reg_source = S5PC100_CLKSRC0,
+ .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
};
static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
@@ -111,7 +93,9 @@
.name = "dout_apll",
.id = -1,
.parent = &clk_mout_apll.clk,
- .get_rate = s5pc100_clk_dout_apll_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_apll_get_rate,
+ },
};
static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
@@ -165,9 +149,11 @@
.name = "armclk",
.id = -1,
.parent = &clk_dout_apll,
- .get_rate = s5pc100_clk_arm_get_rate,
- .set_rate = s5pc100_clk_arm_set_rate,
- .round_rate = s5pc100_clk_arm_round_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_arm_get_rate,
+ .set_rate = s5pc100_clk_arm_set_rate,
+ .round_rate = s5pc100_clk_arm_round_rate,
+ },
};
static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
@@ -185,7 +171,9 @@
.name = "dout_d0_bus",
.id = -1,
.parent = &clk_arm,
- .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
@@ -203,7 +191,9 @@
.name = "dout_pclkd0",
.id = -1,
.parent = &clk_dout_d0_bus,
- .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
@@ -221,7 +211,9 @@
.name = "dout_apll2",
.id = -1,
.parent = &clk_mout_apll.clk,
- .get_rate = s5pc100_clk_dout_apll2_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_apll2_get_rate,
+ },
};
/* MPLL */
@@ -230,7 +222,7 @@
[1] = &clk_fout_mpll,
};
-static struct clk_sources clk_src_mpll = {
+static struct clksrc_sources clk_src_mpll = {
.sources = clk_src_mpll_list,
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
@@ -240,10 +232,8 @@
.name = "mout_mpll",
.id = -1,
},
- .shift = S5PC100_CLKSRC0_MPLL_SHIFT,
- .mask = S5PC100_CLKSRC0_MPLL_MASK,
.sources = &clk_src_mpll,
- .reg_source = S5PC100_CLKSRC0,
+ .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
};
static struct clk *clkset_am_list[] = {
@@ -251,7 +241,7 @@
[1] = &clk_dout_apll2,
};
-static struct clk_sources clk_src_am = {
+static struct clksrc_sources clk_src_am = {
.sources = clkset_am_list,
.nr_sources = ARRAY_SIZE(clkset_am_list),
};
@@ -261,10 +251,8 @@
.name = "mout_am",
.id = -1,
},
- .shift = S5PC100_CLKSRC0_AMMUX_SHIFT,
- .mask = S5PC100_CLKSRC0_AMMUX_MASK,
.sources = &clk_src_am,
- .reg_source = S5PC100_CLKSRC0,
+ .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
};
static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
@@ -284,7 +272,9 @@
.name = "dout_d1_bus",
.id = -1,
.parent = &clk_mout_am.clk,
- .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
+ },
};
static struct clk *clkset_onenand_list[] = {
@@ -292,7 +282,7 @@
[1] = &clk_dout_d1_bus,
};
-static struct clk_sources clk_src_onenand = {
+static struct clksrc_sources clk_src_onenand = {
.sources = clkset_onenand_list,
.nr_sources = ARRAY_SIZE(clkset_onenand_list),
};
@@ -302,10 +292,8 @@
.name = "mout_onenand",
.id = -1,
},
- .shift = S5PC100_CLKSRC0_ONENAND_SHIFT,
- .mask = S5PC100_CLKSRC0_ONENAND_MASK,
.sources = &clk_src_onenand,
- .reg_source = S5PC100_CLKSRC0,
+ .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
};
static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
@@ -325,7 +313,9 @@
.name = "dout_pclkd1",
.id = -1,
.parent = &clk_dout_d1_bus,
- .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
@@ -345,7 +335,9 @@
.name = "dout_mpll2",
.id = -1,
.parent = &clk_mout_am.clk,
- .get_rate = s5pc100_clk_dout_mpll2_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_mpll2_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
@@ -365,7 +357,9 @@
.name = "dout_cam",
.id = -1,
.parent = &clk_dout_mpll2,
- .get_rate = s5pc100_clk_dout_cam_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_cam_get_rate,
+ },
};
static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
@@ -385,7 +379,9 @@
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_am.clk,
- .get_rate = s5pc100_clk_dout_mpll_get_rate,
+ .ops = &(struct clk_ops) {
+ .get_rate = s5pc100_clk_dout_mpll_get_rate,
+ },
};
/* EPLL */
@@ -399,7 +395,7 @@
[1] = &clk_fout_epll,
};
-static struct clk_sources clk_src_epll = {
+static struct clksrc_sources clk_src_epll = {
.sources = clk_src_epll_list,
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
@@ -409,10 +405,8 @@
.name = "mout_epll",
.id = -1,
},
- .shift = S5PC100_CLKSRC0_EPLL_SHIFT,
- .mask = S5PC100_CLKSRC0_EPLL_MASK,
- .sources = &clk_src_epll,
- .reg_source = S5PC100_CLKSRC0,
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
};
/* HPLL */
@@ -426,7 +420,7 @@
[1] = &clk_fout_hpll,
};
-static struct clk_sources clk_src_hpll = {
+static struct clksrc_sources clk_src_hpll = {
.sources = clk_src_hpll_list,
.nr_sources = ARRAY_SIZE(clk_src_hpll_list),
};
@@ -436,10 +430,8 @@
.name = "mout_hpll",
.id = -1,
},
- .shift = S5PC100_CLKSRC0_HPLL_SHIFT,
- .mask = S5PC100_CLKSRC0_HPLL_MASK,
- .sources = &clk_src_hpll,
- .reg_source = S5PC100_CLKSRC0,
+ .sources = &clk_src_hpll,
+ .reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
};
/* Peripherals */
@@ -454,190 +446,6 @@
* have a common parent divisor so are not included here.
*/
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
- return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv = __raw_readl(sclk->reg_divider);
-
- clkdiv >>= sclk->divider_shift;
- clkdiv &= 0xf;
- clkdiv++;
-
- rate /= clkdiv;
- return rate;
-}
-
-static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- void __iomem *reg = sclk->reg_divider;
- unsigned int div;
- u32 val;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
- if (div > 16)
- return -EINVAL;
-
- val = __raw_readl(reg);
- val &= ~(0xf << sclk->divider_shift);
- val |= (div - 1) << sclk->divider_shift;
- __raw_writel(val, reg);
-
- return 0;
-}
-
-static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
- struct clksrc_clk *sclk = to_clksrc(clk);
- struct clk_sources *srcs = sclk->sources;
- u32 clksrc = __raw_readl(sclk->reg_source);
- int src_nr = -1;
- int ptr;
-
- for (ptr = 0; ptr < srcs->nr_sources; ptr++)
- if (srcs->sources[ptr] == parent) {
- src_nr = ptr;
- break;
- }
-
- if (src_nr >= 0) {
- clksrc &= ~sclk->mask;
- clksrc |= src_nr << sclk->shift;
-
- __raw_writel(clksrc, sclk->reg_source);
- return 0;
- }
-
- return -EINVAL;
-}
-
-static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- rate = parent_rate;
- else {
- div = rate / parent_rate;
-
- if (div == 0)
- div = 1;
- if (div > 16)
- div = 16;
-
- rate = parent_rate / div;
- }
-
- return rate;
-}
-
-static struct clk *clkset_spi_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll2,
- &clk_fin_epll,
- &clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_spi = {
- .sources = clkset_spi_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clksrc_clk clk_spi0 = {
- .clk = {
- .name = "spi_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC1_SPI0_SHIFT,
- .mask = S5PC100_CLKSRC1_SPI0_MASK,
- .sources = &clkset_spi,
- .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT,
- .reg_divider = S5PC100_CLKDIV2,
- .reg_source = S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi1 = {
- .clk = {
- .name = "spi_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC1_SPI1_SHIFT,
- .mask = S5PC100_CLKSRC1_SPI1_MASK,
- .sources = &clkset_spi,
- .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT,
- .reg_divider = S5PC100_CLKDIV2,
- .reg_source = S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi2 = {
- .clk = {
- .name = "spi_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC1_SPI2_SHIFT,
- .mask = S5PC100_CLKSRC1_SPI2_MASK,
- .sources = &clkset_spi,
- .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT,
- .reg_divider = S5PC100_CLKDIV2,
- .reg_source = S5PC100_CLKSRC1,
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
-};
-
-static struct clk_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC1_UART_SHIFT,
- .mask = S5PC100_CLKSRC1_UART_MASK,
- .sources = &clkset_uart,
- .divider_shift = S5PC100_CLKDIV2_UART_SHIFT,
- .reg_divider = S5PC100_CLKDIV2,
- .reg_source = S5PC100_CLKSRC1,
-};
-
static struct clk clk_iis_cd0 = {
.name = "iis_cdclk0",
.id = -1,
@@ -672,28 +480,31 @@
&clk_mout_hpll.clk,
};
-static struct clk_sources clkset_audio0 = {
+static struct clksrc_sources clkset_audio0 = {
.sources = clkset_audio0_list,
.nr_sources = ARRAY_SIZE(clkset_audio0_list),
};
-static struct clksrc_clk clk_audio0 = {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT,
- .mask = S5PC100_CLKSRC3_AUDIO0_MASK,
- .sources = &clkset_audio0,
- .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT,
- .reg_divider = S5PC100_CLKDIV4,
- .reg_source = S5PC100_CLKSRC3,
+static struct clk *clkset_spi_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll2,
+ &clk_fin_epll,
+ &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clkset_spi = {
+ .sources = clkset_spi_list,
+ .nr_sources = ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
};
static struct clk *clkset_audio1_list[] = {
@@ -705,30 +516,11 @@
&clk_mout_hpll.clk,
};
-static struct clk_sources clkset_audio1 = {
+static struct clksrc_sources clkset_audio1 = {
.sources = clkset_audio1_list,
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
-static struct clksrc_clk clk_audio1 = {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT,
- .mask = S5PC100_CLKSRC3_AUDIO1_MASK,
- .sources = &clkset_audio1,
- .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT,
- .reg_divider = S5PC100_CLKDIV4,
- .reg_source = S5PC100_CLKSRC3,
-};
-
static struct clk *clkset_audio2_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
@@ -737,52 +529,56 @@
&clk_mout_hpll.clk,
};
-static struct clk_sources clkset_audio2 = {
+static struct clksrc_sources clkset_audio2 = {
.sources = clkset_audio2_list,
.nr_sources = ARRAY_SIZE(clkset_audio2_list),
};
-static struct clksrc_clk clk_audio2 = {
- .clk = {
- .name = "audio-bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
+static struct clksrc_clk clksrc_audio[] = {
+ {
+ .clk = {
+ .name = "audio-bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_audio0,
+ .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_audio1,
+ .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_audio2,
+ .reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
},
- .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT,
- .mask = S5PC100_CLKSRC3_AUDIO2_MASK,
- .sources = &clkset_audio2,
- .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT,
- .reg_divider = S5PC100_CLKDIV4,
- .reg_source = S5PC100_CLKSRC3,
};
static struct clk *clkset_spdif_list[] = {
- &clk_audio0.clk,
- &clk_audio1.clk,
- &clk_audio2.clk,
+ &clksrc_audio[0].clk,
+ &clksrc_audio[1].clk,
+ &clksrc_audio[2].clk,
};
-static struct clk_sources clkset_spdif = {
+static struct clksrc_sources clkset_spdif = {
.sources = clkset_spdif_list,
.nr_sources = ARRAY_SIZE(clkset_spdif_list),
};
-static struct clksrc_clk clk_spdif = {
- .clk = {
- .name = "spdif",
- .id = -1,
- },
- .shift = S5PC100_CLKSRC3_SPDIF_SHIFT,
- .mask = S5PC100_CLKSRC3_SPDIF_MASK,
- .sources = &clkset_spdif,
- .reg_source = S5PC100_CLKSRC3,
-};
-
static struct clk *clkset_lcd_fimc_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
@@ -790,87 +586,11 @@
&clk_vclk_54m,
};
-static struct clk_sources clkset_lcd_fimc = {
+static struct clksrc_sources clkset_lcd_fimc = {
.sources = clkset_lcd_fimc_list,
.nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
};
-static struct clksrc_clk clk_lcd = {
- .clk = {
- .name = "lcd",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_LCD_SHIFT,
- .mask = S5PC100_CLKSRC2_LCD_MASK,
- .sources = &clkset_lcd_fimc,
- .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc0 = {
- .clk = {
- .name = "fimc",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_FIMC0_SHIFT,
- .mask = S5PC100_CLKSRC2_FIMC0_MASK,
- .sources = &clkset_lcd_fimc,
- .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc1 = {
- .clk = {
- .name = "fimc",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_FIMC1_SHIFT,
- .mask = S5PC100_CLKSRC2_FIMC1_MASK,
- .sources = &clkset_lcd_fimc,
- .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc2 = {
- .clk = {
- .name = "fimc",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
- .enable = s5pc100_sclk1_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_FIMC2_SHIFT,
- .mask = S5PC100_CLKSRC2_FIMC2_MASK,
- .sources = &clkset_lcd_fimc,
- .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
static struct clk *clkset_mmc_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
@@ -878,69 +598,11 @@
&clk_mout_hpll.clk ,
};
-static struct clk_sources clkset_mmc = {
+static struct clksrc_sources clkset_mmc = {
.sources = clkset_mmc_list,
.nr_sources = ARRAY_SIZE(clkset_mmc_list),
};
-static struct clksrc_clk clk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_MMC0_SHIFT,
- .mask = S5PC100_CLKSRC2_MMC0_MASK,
- .sources = &clkset_mmc,
- .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_MMC1_SHIFT,
- .mask = S5PC100_CLKSRC2_MMC1_MASK,
- .sources = &clkset_mmc,
- .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC2_MMC2_SHIFT,
- .mask = S5PC100_CLKSRC2_MMC2_MASK,
- .sources = &clkset_mmc,
- .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT,
- .reg_divider = S5PC100_CLKDIV3,
- .reg_source = S5PC100_CLKSRC2,
-};
-
-
static struct clk *clkset_usbhost_list[] = {
&clk_mout_epll.clk,
&clk_dout_mpll,
@@ -948,28 +610,141 @@
&clk_48m,
};
-static struct clk_sources clkset_usbhost = {
+static struct clksrc_sources clkset_usbhost = {
.sources = clkset_usbhost_list,
.nr_sources = ARRAY_SIZE(clkset_usbhost_list),
};
-static struct clksrc_clk clk_usbhost = {
- .clk = {
- .name = "usbhost",
- .id = -1,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
- .enable = s5pc100_sclk0_ctrl,
- .set_parent = s5pc100_setparent_clksrc,
- .get_rate = s5pc100_getrate_clksrc,
- .set_rate = s5pc100_setrate_clksrc,
- .round_rate = s5pc100_roundrate_clksrc,
- },
- .shift = S5PC100_CLKSRC1_UHOST_SHIFT,
- .mask = S5PC100_CLKSRC1_UHOST_MASK,
- .sources = &clkset_usbhost,
- .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT,
- .reg_divider = S5PC100_CLKDIV2,
- .reg_source = S5PC100_CLKSRC1,
+static struct clksrc_clk clksrc_clks[] = {
+ {
+ .clk = {
+ .name = "spi_bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clkset_spi,
+ .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
+ }, {
+ .clk = {
+ .name = "spi_bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_spi,
+ .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
+ }, {
+ .clk = {
+ .name = "spi_bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_spi,
+ .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
+ .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
+ }, {
+ .clk = {
+ .name = "spdif",
+ .id = -1,
+ },
+ .sources = &clkset_spdif,
+ .reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
+ }, {
+ .clk = {
+ .name = "lcd",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_lcd_fimc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
+ }, {
+ .clk = {
+ .name = "fimc",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_lcd_fimc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
+ }, {
+ .clk = {
+ .name = "fimc",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_lcd_fimc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
+ }, {
+ .clk = {
+ .name = "fimc",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clkset_lcd_fimc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_mmc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_mmc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_mmc,
+ .reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
+ }, {
+ .clk = {
+ .name = "usbhost",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clkset_usbhost,
+ .reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
+ .reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
+ }
};
/* Clock initialisation code */
@@ -981,45 +756,8 @@
&clk_mout_onenand,
&clk_mout_epll,
&clk_mout_hpll,
- &clk_spi0,
- &clk_spi1,
- &clk_spi2,
- &clk_uart_uclk1,
- &clk_audio0,
- &clk_audio1,
- &clk_audio2,
- &clk_spdif,
- &clk_lcd,
- &clk_fimc0,
- &clk_fimc1,
- &clk_fimc2,
- &clk_mmc0,
- &clk_mmc1,
- &clk_mmc2,
- &clk_usbhost,
};
-static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
-{
- struct clk_sources *srcs = clk->sources;
- u32 clksrc = __raw_readl(clk->reg_source);
-
- clksrc &= clk->mask;
- clksrc >>= clk->shift;
-
- if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
- printk(KERN_ERR "%s: bad source %d\n",
- clk->clk.name, clksrc);
- return;
- }
-
- clk->clk.parent = srcs->sources[clksrc];
-
- printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
- clk->clk.name, clk->clk.parent->name, clksrc,
- print_mhz(clk_get_rate(&clk->clk)));
-}
-
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
void __init_or_cpufreq s5pc100_setup_clocks(void)
@@ -1083,17 +821,25 @@
clk_f.rate = armclk;
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s5pc100_set_clksrc(init_parents[ptr]);
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
+ s3c_set_clksrc(clksrc_audio + ptr, true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+ s3c_set_clksrc(clksrc_clks + ptr, true);
}
static struct clk *clks[] __initdata = {
&clk_ext_xtal_mux,
- &clk_mout_apll.clk,
&clk_dout_apll,
&clk_dout_d0_bus,
&clk_dout_pclkd0,
&clk_dout_apll2,
+ &clk_mout_apll.clk,
&clk_mout_mpll.clk,
+ &clk_mout_epll.clk,
+ &clk_mout_hpll.clk,
&clk_mout_am.clk,
&clk_dout_d1_bus,
&clk_mout_onenand.clk,
@@ -1101,29 +847,12 @@
&clk_dout_mpll2,
&clk_dout_cam,
&clk_dout_mpll,
- &clk_mout_epll.clk,
&clk_fout_epll,
&clk_iis_cd0,
&clk_iis_cd1,
&clk_iis_cd2,
&clk_pcm_cd0,
&clk_pcm_cd1,
- &clk_spi0.clk,
- &clk_spi1.clk,
- &clk_spi2.clk,
- &clk_uart_uclk1.clk,
- &clk_audio0.clk,
- &clk_audio1.clk,
- &clk_audio2.clk,
- &clk_spdif.clk,
- &clk_lcd.clk,
- &clk_fimc0.clk,
- &clk_fimc1.clk,
- &clk_fimc2.clk,
- &clk_mmc0.clk,
- &clk_mmc1.clk,
- &clk_mmc2.clk,
- &clk_usbhost.clk,
&clk_arm,
};
@@ -1141,4 +870,7 @@
clkp->name, ret);
}
}
+
+ s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
+ s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 486a0d6..d552c65 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -7,11 +7,240 @@
config PLAT_SAMSUNG
bool
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+ select NO_IOPORT
default y
help
Base platform code for all Samsung SoC based systems
if PLAT_SAMSUNG
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+ bool "S3C Initialisation watchdog"
+ depends on S3C2410_WATCHDOG
+ help
+ Say y to enable the watchdog during the kernel decompression
+ stage. If the kernel fails to uncompress, then the watchdog
+ will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+ bool "S3C Reboot on decompression error"
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+ bool "Force UART FIFO on during boot process"
+ default y
+ help
+ Say Y here to force the UART FIFOs on during the kernel
+ uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+ int "S3C UART to use for low-level messages"
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+# clock options
+
+config SAMSUNG_CLKSRC
+ bool
+ help
+ Select the clock code for the clksrc implementation
+ used by newer systems such as the S3C64XX.
+
+# options for IRQ support
+
+config SAMSUNG_IRQ_VIC_TIMER
+ bool
+ help
+ Internal configuration to build the VIC timer interrupt code.
+
+config SAMSUNG_IRQ_UART
+ bool
+ help
+ Internal configuration to build the IRQ UART demux code.
+
+# options for gpio configuration support
+
+config SAMSUNG_GPIOLIB_4BIT
+ bool
+ help
+ GPIOlib file contains the 4 bit modification functions for gpio
+ configuration. GPIOlib shall be compiled only for S3C64XX and S5P
+ series of processors.
+
+config S3C_GPIO_CFG_S3C24XX
+ bool
+ help
+ Internal configuration to enable S3C24XX style GPIO configuration
+ functions.
+
+config S3C_GPIO_CFG_S3C64XX
+ bool
+ help
+ Internal configuration to enable S3C64XX style GPIO configuration
+ functions.
+
+config S5P_GPIO_CFG_S5PC1XX
+ bool
+ help
+ Internal configuration to enable S5PC1XX style GPIO configuration
+ functions.
+
+config S3C_GPIO_PULL_UPDOWN
+ bool
+ help
+ Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+ bool
+ help
+ Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+ bool
+ help
+ Internal configuration to enable the correct GPIO pull helper
+
+config SAMSUNG_GPIO_EXTRA
+ int "Number of additional GPIO pins"
+ default 0
+ help
+ Use additional GPIO space in addition to the GPIO's the SOC
+ provides. This allows expanding the GPIO space for use with
+ GPIO expanders.
+
+config S3C_GPIO_SPACE
+ int "Space between gpio banks"
+ default 0
+ help
+ Add a number of spare GPIO entries between each bank for debugging
+ purposes. This allows any problems where an counter overflows from
+ one bank to another to be caught, at the expense of using a little
+ more memory.
+
+config S3C_GPIO_TRACK
+ bool
+ help
+ Internal configuration option to enable the s3c specific gpio
+ chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+ bool "ADC common driver support"
+ help
+ Core support for the ADC block found in the Samsung SoC systems
+ for drivers such as the touchscreen and hwmon to use to share
+ this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+ bool
+ help
+ Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_I2C1
+ bool
+ help
+ Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+ bool
+ help
+ Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+ bool
+ help
+ Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+ bool
+ help
+ Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_NAND
+ bool
+ help
+ Compile in platform device definition for NAND controller
+
+config S3C64XX_DEV_SPI
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controllers.
+
+# DMA
+
+config S3C_DMA
+ bool
+ help
+ Internal configuration for S3C DMA core
+
+comment "Power management"
+
+config SAMSUNG_PM_DEBUG
+ bool "S3C2410 PM Suspend debug"
+ depends on PM
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on PM && CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+ See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on PM && SAMSUNG_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but wil identify any
+ faults with better precision.
+
+ See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4478b9f..22c89d0 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -9,3 +9,48 @@
obj-n := dummy.o
obj- :=
+# Objects we always build independent of SoC choice
+
+obj-y += init.o
+obj-y += time.o
+obj-y += clock.o
+obj-y += pwm-clock.o
+obj-y += gpio.o
+obj-y += gpio-config.o
+
+obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o
+obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o
+
+obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o
+obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC) += adc.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
+obj-y += dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-y += dev-uart.o
+obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
+
+# DMA support
+
+obj-$(CONFIG_S3C_DMA) += dma.o
+
+# PM support
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += pm-gpio.o
+obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
+
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-samsung/adc.c
similarity index 88%
rename from arch/arm/plat-s3c24xx/adc.c
rename to arch/arm/plat-samsung/adc.c
index ce47627..0b5833b 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/adc.c
+/* arch/arm/plat-samsung/adc.c
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
*
- * S3C24XX ADC device core
+ * Samsung ADC device core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,6 +37,11 @@
* action is required.
*/
+enum s3c_cpu_type {
+ TYPE_S3C24XX,
+ TYPE_S3C64XX
+};
+
struct s3c_adc_client {
struct platform_device *pdev;
struct list_head pend;
@@ -257,12 +262,13 @@
{
struct adc_device *adc = pw;
struct s3c_adc_client *client = adc->cur;
+ enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
unsigned long flags;
unsigned data0, data1;
if (!client) {
dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
- return IRQ_HANDLED;
+ goto exit;
}
data0 = readl(adc->regs + S3C2410_ADCDAT0);
@@ -271,9 +277,17 @@
client->nr_samples--;
+ if (cpu == TYPE_S3C64XX) {
+ /* S3C64XX ADC resolution is 12-bit */
+ data0 &= 0xfff;
+ data1 &= 0xfff;
+ } else {
+ data0 &= 0x3ff;
+ data1 &= 0x3ff;
+ }
+
if (client->convert_cb)
- (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
- &client->nr_samples);
+ (client->convert_cb)(client, data0, data1, &client->nr_samples);
if (client->nr_samples > 0) {
/* fire another conversion for this */
@@ -289,6 +303,11 @@
local_irq_restore(flags);
}
+exit:
+ if (cpu == TYPE_S3C64XX) {
+ /* Clear ADC interrupt */
+ writel(0, adc->regs + S3C64XX_ADCCLRINT);
+ }
return IRQ_HANDLED;
}
@@ -298,6 +317,7 @@
struct adc_device *adc;
struct resource *regs;
int ret;
+ unsigned tmp;
adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
if (adc == NULL) {
@@ -344,8 +364,12 @@
clk_enable(adc->clk);
- writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
- adc->regs + S3C2410_ADCCON);
+ tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+ if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+ /* Enable 12-bit ADC resolution */
+ tmp |= S3C64XX_ADCCON_RESSEL;
+ }
+ writel(tmp, adc->regs + S3C2410_ADCCON);
dev_info(dev, "attached adc driver\n");
@@ -388,6 +412,7 @@
con |= S3C2410_ADCCON_STDBM;
writel(con, adc->regs + S3C2410_ADCCON);
+ disable_irq(adc->irq);
clk_disable(adc->clk);
return 0;
@@ -398,6 +423,7 @@
struct adc_device *adc = platform_get_drvdata(pdev);
clk_enable(adc->clk);
+ enable_irq(adc->irq);
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
@@ -410,9 +436,22 @@
#define s3c_adc_resume NULL
#endif
+static struct platform_device_id s3c_adc_driver_ids[] = {
+ {
+ .name = "s3c24xx-adc",
+ .driver_data = TYPE_S3C24XX,
+ }, {
+ .name = "s3c64xx-adc",
+ .driver_data = TYPE_S3C64XX,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
static struct platform_driver s3c_adc_driver = {
+ .id_table = s3c_adc_driver_ids,
.driver = {
- .name = "s3c24xx-adc",
+ .name = "s3c-adc",
.owner = THIS_MODULE,
},
.probe = s3c_adc_probe,
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
new file mode 100644
index 0000000..ae8b850
--- /dev/null
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -0,0 +1,212 @@
+/* linux/arch/arm/plat-samsung/clock-clksrc.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu-freq.h>
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+ return container_of(clk, struct clksrc_clk, clk);
+}
+
+static inline u32 bit_mask(u32 shift, u32 nr_bits)
+{
+ u32 mask = 0xffffffff >> (32 - nr_bits);
+
+ return mask << shift;
+}
+
+static unsigned long s3c_getrate_clksrc(struct clk *clk)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv = __raw_readl(sclk->reg_div.reg);
+ u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+
+ clkdiv &= mask;
+ clkdiv >>= sclk->reg_div.shift;
+ clkdiv++;
+
+ rate /= clkdiv;
+ return rate;
+}
+
+static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ void __iomem *reg = sclk->reg_div.reg;
+ unsigned int div;
+ u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+ u32 val;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+ if (div > (1 << sclk->reg_div.size))
+ return -EINVAL;
+
+ val = __raw_readl(reg);
+ val &= ~mask;
+ val |= (div - 1) << sclk->reg_div.shift;
+ __raw_writel(val, reg);
+
+ return 0;
+}
+
+static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ struct clksrc_sources *srcs = sclk->sources;
+ u32 clksrc = __raw_readl(sclk->reg_src.reg);
+ u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
+ int src_nr = -1;
+ int ptr;
+
+ for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+ if (srcs->sources[ptr] == parent) {
+ src_nr = ptr;
+ break;
+ }
+
+ if (src_nr >= 0) {
+ clk->parent = parent;
+
+ clksrc &= ~mask;
+ clksrc |= src_nr << sclk->reg_src.shift;
+
+ __raw_writel(clksrc, sclk->reg_src.reg);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static unsigned long s3c_roundrate_clksrc(struct clk *clk,
+ unsigned long rate)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int max_div = 1 << sclk->reg_div.size;
+ int div;
+
+ if (rate >= parent_rate)
+ rate = parent_rate;
+ else {
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div == 0)
+ div = 1;
+ if (div > max_div)
+ div = max_div;
+
+ rate = parent_rate / div;
+ }
+
+ return rate;
+}
+
+/* Clock initialisation code */
+
+void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
+{
+ struct clksrc_sources *srcs = clk->sources;
+ u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
+ u32 clksrc;
+
+ if (!clk->reg_src.reg) {
+ if (!clk->clk.parent)
+ printk(KERN_ERR "%s: no parent clock specified\n",
+ clk->clk.name);
+ return;
+ }
+
+ clksrc = __raw_readl(clk->reg_src.reg);
+ clksrc &= mask;
+ clksrc >>= clk->reg_src.shift;
+
+ if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+ printk(KERN_ERR "%s: bad source %d\n",
+ clk->clk.name, clksrc);
+ return;
+ }
+
+ clk->clk.parent = srcs->sources[clksrc];
+
+ if (announce)
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ clk_get_rate(&clk->clk));
+}
+
+static struct clk_ops clksrc_ops = {
+ .set_parent = s3c_setparent_clksrc,
+ .get_rate = s3c_getrate_clksrc,
+ .set_rate = s3c_setrate_clksrc,
+ .round_rate = s3c_roundrate_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nodiv = {
+ .set_parent = s3c_setparent_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nosrc = {
+ .get_rate = s3c_getrate_clksrc,
+ .set_rate = s3c_setrate_clksrc,
+ .round_rate = s3c_roundrate_clksrc,
+};
+
+void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
+{
+ int ret;
+
+ for (; size > 0; size--, clksrc++) {
+ if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
+ printk(KERN_ERR "%s: clock %s has no registers set\n",
+ __func__, clksrc->clk.name);
+
+ /* fill in the default functions */
+
+ if (!clksrc->clk.ops) {
+ if (!clksrc->reg_div.reg)
+ clksrc->clk.ops = &clksrc_ops_nodiv;
+ else if (!clksrc->reg_src.reg)
+ clksrc->clk.ops = &clksrc_ops_nosrc;
+ else
+ clksrc->clk.ops = &clksrc_ops;
+ }
+
+ /* setup the clocksource, but do not announce it
+ * as it may be re-set by the setup routines
+ * called after the rest of the clocks have been
+ * registered
+ */
+ s3c_set_clksrc(clksrc, false);
+
+ ret = s3c24xx_register_clock(&clksrc->clk);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to register %s (%d)\n",
+ __func__, clksrc->clk.name, ret);
+ }
+ }
+}
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-samsung/clock.c
similarity index 78%
rename from arch/arm/plat-s3c/clock.c
rename to arch/arm/plat-samsung/clock.c
index 619cfa8..1b25c9d 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -150,8 +150,8 @@
if (clk->rate != 0)
return clk->rate;
- if (clk->get_rate != NULL)
- return (clk->get_rate)(clk);
+ if (clk->ops != NULL && clk->ops->get_rate != NULL)
+ return (clk->ops->get_rate)(clk);
if (clk->parent != NULL)
return clk_get_rate(clk->parent);
@@ -161,8 +161,8 @@
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- if (!IS_ERR(clk) && clk->round_rate)
- return (clk->round_rate)(clk, rate);
+ if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+ return (clk->ops->round_rate)(clk, rate);
return rate;
}
@@ -178,13 +178,14 @@
* the clock may have been made this way by choice.
*/
- WARN_ON(clk->set_rate == NULL);
+ WARN_ON(clk->ops == NULL);
+ WARN_ON(clk->ops && clk->ops->set_rate == NULL);
- if (clk->set_rate == NULL)
+ if (clk->ops == NULL || clk->ops->set_rate == NULL)
return -EINVAL;
spin_lock(&clocks_lock);
- ret = (clk->set_rate)(clk, rate);
+ ret = (clk->ops->set_rate)(clk, rate);
spin_unlock(&clocks_lock);
return ret;
@@ -204,8 +205,8 @@
spin_lock(&clocks_lock);
- if (clk->set_parent)
- ret = (clk->set_parent)(clk, parent);
+ if (clk->ops && clk->ops->set_parent)
+ ret = (clk->ops->set_parent)(clk, parent);
spin_unlock(&clocks_lock);
@@ -224,12 +225,16 @@
/* base clocks */
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
+int clk_default_setrate(struct clk *clk, unsigned long rate)
{
clk->rate = rate;
return 0;
}
+struct clk_ops clk_ops_def_setrate = {
+ .set_rate = clk_default_setrate,
+};
+
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
@@ -251,7 +256,7 @@
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_upll = {
@@ -267,7 +272,6 @@
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
};
struct clk clk_h = {
@@ -276,7 +280,7 @@
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_p = {
@@ -285,7 +289,7 @@
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
- .set_rate = clk_default_setrate,
+ .ops = &clk_ops_def_setrate,
};
struct clk clk_usb_bus = {
@@ -296,7 +300,6 @@
};
-
struct clk s3c24xx_uclk = {
.name = "uclk",
.id = -1,
@@ -304,6 +307,12 @@
/* initialise the clock system */
+/**
+ * s3c24xx_register_clock() - register a clock
+ * @clk: The clock to register
+ *
+ * Add the specified clock to the list of clocks known by the system.
+ */
int s3c24xx_register_clock(struct clk *clk)
{
if (clk->enable == NULL)
@@ -321,18 +330,52 @@
return 0;
}
+/**
+ * s3c24xx_register_clocks() - register an array of clock pointers
+ * @clks: Pointer to an array of struct clk pointers
+ * @nr_clks: The number of clocks in the @clks array.
+ *
+ * Call s3c24xx_register_clock() for all the clock pointers contained
+ * in the @clks list. Returns the number of failures.
+ */
int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
{
int fails = 0;
for (; nr_clks > 0; nr_clks--, clks++) {
- if (s3c24xx_register_clock(*clks) < 0)
+ if (s3c24xx_register_clock(*clks) < 0) {
+ struct clk *clk = *clks;
+ printk(KERN_ERR "%s: failed to register %p: %s\n",
+ __func__, clk, clk->name);
fails++;
+ }
}
return fails;
}
+/**
+ * s3c_register_clocks() - register an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * Call s3c24xx_register_clock() on the @clkp array given, printing an
+ * error if it fails to register the clock (unlikely).
+ */
+void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
+{
+ int ret;
+
+ for (; nr_clks > 0; nr_clks--, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+}
+
/* initalise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-fb.c
rename to arch/arm/plat-samsung/dev-fb.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-hsmmc.c
rename to arch/arm/plat-samsung/dev-hsmmc.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-hsmmc1.c
rename to arch/arm/plat-samsung/dev-hsmmc1.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-hsmmc2.c
rename to arch/arm/plat-samsung/dev-hsmmc2.c
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-i2c0.c
rename to arch/arm/plat-samsung/dev-i2c0.c
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-i2c1.c
rename to arch/arm/plat-samsung/dev-i2c1.c
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-nand.c
rename to arch/arm/plat-samsung/dev-nand.c
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 0000000..3776cd9
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ * originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
similarity index 85%
rename from arch/arm/plat-s3c/dev-usb-hsotg.c
rename to arch/arm/plat-samsung/dev-usb-hsotg.c
index e2f604b..33a844a 100644
--- a/arch/arm/plat-s3c/dev-usb-hsotg.c
+++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -33,9 +34,15 @@
},
};
+static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
+
struct platform_device s3c_device_usb_hsotg = {
.name = "s3c-hsotg",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
.resource = s3c_usb_hsotg_resources,
+ .dev = {
+ .dma_mask = &s3c_hsotg_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
similarity index 61%
rename from arch/arm/plat-s3c/dev-usb.c
rename to arch/arm/plat-samsung/dev-usb.c
index 2ee85ab..8816565 100644
--- a/arch/arm/plat-s3c/dev-usb.c
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -19,7 +19,7 @@
#include <mach/map.h>
#include <plat/devs.h>
-
+#include <plat/usb-control.h>
static struct resource s3c_usb_resource[] = {
[0] = {
@@ -36,7 +36,7 @@
static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-struct platform_device s3c_device_usb = {
+struct platform_device s3c_device_ohci = {
.name = "s3c2410-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_resource),
@@ -47,4 +47,23 @@
}
};
-EXPORT_SYMBOL(s3c_device_usb);
+EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+ struct s3c2410_hcd_info *npd;
+
+ npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_ohci.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-samsung/dma.c
similarity index 96%
rename from arch/arm/plat-s3c/dma.c
rename to arch/arm/plat-samsung/dma.c
index a995850..cb459dd 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-samsung/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/dma.c
+/* linux/arch/arm/plat-samsung/dma.c
*
* Copyright (c) 2003-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -20,8 +20,6 @@
#include <mach/dma.h>
#include <mach/irqs.h>
-#include <plat/dma-plat.h>
-
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
similarity index 98%
rename from arch/arm/plat-s3c/gpio-config.c
rename to arch/arm/plat-samsung/gpio-config.c
index 456969b..44a84e8 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -17,7 +17,7 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-samsung/gpio.c
similarity index 98%
rename from arch/arm/plat-s3c/gpio.c
rename to arch/arm/plat-samsung/gpio.c
index 5ff24e0..28d2ab8 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-samsung/gpio.c
@@ -16,7 +16,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
#ifdef CONFIG_S3C_GPIO_TRACK
struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
new file mode 100644
index 0000000..8a8ba8b
--- /dev/null
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -0,0 +1,199 @@
+/* arch/arm/plat-samsung/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + GPIOCON_OFF);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + GPIOCON_OFF);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, base + GPIOCON_OFF);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+
+ if (offset > 7)
+ offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned con_offset = offset;
+
+ if (con_offset > 7)
+ con_offset -= 8;
+ else
+ regcon -= 4;
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + GPIODAT_OFF);
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = samsung_gpiolib_4bit_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+ chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ samsung_gpiolib_add_4bit(chip);
+ s3c_gpiolib_add(chip);
+ }
+}
+
+void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ samsung_gpiolib_add_4bit2(chip);
+ s3c_gpiolib_add(chip);
+ }
+}
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
similarity index 92%
rename from arch/arm/plat-s3c/include/plat/adc.h
rename to arch/arm/plat-samsung/include/plat/adc.h
index 5f3b1cd..e8382c7 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c/include/plat/adc.h
+/* arch/arm/plat-samsung/include/plat/adc.h
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simnte.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX ADC driver information
+ * S3C ADC driver information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
similarity index 64%
rename from arch/arm/plat-s3c/include/plat/audio.h
rename to arch/arm/plat-samsung/include/plat/audio.h
index f22d23b..e32f9ed 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio.h
+/* arch/arm/plat-samsung/include/plat/audio.h
*
* Copyright (c) 2009 Samsung Electronics Co. Ltd
* Author: Jaswinder Singh <jassi.brar@samsung.com>
@@ -8,6 +8,14 @@
* published by the Free Software Foundation.
*/
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD 0
+#define S3C64XX_AC97_GPE 1
+extern void s3c64xx_ac97_setup_gpio(int);
+
/**
* struct s3c_audio_pdata - common platform data for audio device drivers
* @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
new file mode 100644
index 0000000..50a8ca7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+ *
+ * Parts taken from arch/arm/plat-s3c64xx/clock.c
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Harald Welte
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct clksrc_sources - list of sources for a given clock
+ * @sources: array of pointers to clocks
+ * @nr_sources: The size of @sources
+ */
+struct clksrc_sources {
+ unsigned int nr_sources;
+ struct clk **sources;
+};
+
+/**
+ * struct clksrc_reg - register definition for clock control bits
+ * @reg: pointer to the register in virtual memory.
+ * @shift: the shift in bits to where the bitfield is.
+ * @size: the size in bits of the bitfield.
+ *
+ * This specifies the size and position of the bits we are interested
+ * in within the register specified by @reg.
+ */
+struct clksrc_reg {
+ void __iomem *reg;
+ unsigned short shift;
+ unsigned short size;
+};
+
+/**
+ * struct clksrc_clk - class of clock for newer style samsung devices.
+ * @clk: the standard clock representation
+ * @sources: the sources for this clock
+ * @reg_src: the register definition for selecting the clock's source
+ * @reg_div: the register definition for the clock's output divisor
+ *
+ * This clock implements the features required by the newer SoCs where
+ * the standard clock block provides an input mux and a post-mux divisor
+ * to provide the periperhal's clock.
+ *
+ * The array of @sources provides the mapping of mux position to the
+ * clock, and @reg_src shows the code where to modify to change the mux
+ * position. The @reg_div defines how to change the divider settings on
+ * the output.
+ */
+struct clksrc_clk {
+ struct clk clk;
+ struct clksrc_sources *sources;
+
+ struct clksrc_reg reg_src;
+ struct clksrc_reg reg_div;
+};
+
+/**
+ * s3c_set_clksrc() - setup the clock from the register settings
+ * @clk: The clock to setup.
+ * @announce: true to announce the setting to printk().
+ *
+ * Setup the clock from the current register settings, for when the
+ * kernel boots or if it is resuming from a possibly unknown state.
+ */
+extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
+
+/**
+ * s3c_register_clksrc() register clocks from an array of clksrc clocks
+ * @srcs: The array of clocks to register
+ * @size: The size of the @srcs array.
+ *
+ * Initialise and register the array of clocks described by @srcs.
+ */
+extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
similarity index 72%
rename from arch/arm/plat-s3c/include/plat/clock.h
rename to arch/arm/plat-samsung/include/plat/clock.h
index d86af84..60b6269 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -11,6 +11,30 @@
#include <linux/spinlock.h>
+struct clk;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ * Adding an extra layer of indirection into the process should
+ * not be a problem as it is unlikely these operations are going
+ * to need to be called quickly.
+ */
+struct clk_ops {
+ int (*set_rate)(struct clk *c, unsigned long rate);
+ unsigned long (*get_rate)(struct clk *c);
+ unsigned long (*round_rate)(struct clk *c, unsigned long rate);
+ int (*set_parent)(struct clk *c, struct clk *parent);
+};
+
struct clk {
struct list_head list;
struct module *owner;
@@ -21,11 +45,8 @@
unsigned long rate;
unsigned long ctrlbit;
+ struct clk_ops *ops;
int (*enable)(struct clk *, int enable);
- int (*set_rate)(struct clk *c, unsigned long rate);
- unsigned long (*get_rate)(struct clk *c);
- unsigned long (*round_rate)(struct clk *c, unsigned long rate);
- int (*set_parent)(struct clk *c, struct clk *parent);
};
/* other clocks which may be registered by board support */
@@ -54,6 +75,9 @@
extern struct clk clk_27m;
extern struct clk clk_48m;
+extern int clk_default_setrate(struct clk *clk, unsigned long rate);
+extern struct clk_ops clk_ops_def_setrate;
+
/* exports for arch/arm/mach-s3c2410
*
* Please DO NOT use these outside of arch/arm/mach-s3c2410
@@ -66,9 +90,11 @@
extern int s3c24xx_register_clock(struct clk *clk);
extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
+extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+
extern int s3c24xx_register_baseclocks(unsigned long xtal);
-extern void s3c64xx_register_clocks(void);
+extern void s5p_register_clocks(unsigned long xtal_freq);
extern void s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/cpu-freq.h
rename to arch/arm/plat-samsung/include/plat/cpu-freq.h
index 94eb06a..80c4a80 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+/* arch/arm/plat-samsung/include/plat/cpu-freq.h
*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
similarity index 91%
rename from arch/arm/plat-s3c/include/plat/cpu.h
rename to arch/arm/plat-samsung/include/plat/cpu.h
index d1131ca..d316b4a 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/cpu.h
+/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -48,9 +48,12 @@
extern void s3c24xx_init_irq(void);
extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
+extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+extern void s5p_init_io(struct map_desc *mach_desc,
+ int size, void __iomem *cpuid_addr);
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
similarity index 81%
rename from arch/arm/plat-s3c/include/plat/debug-macro.S
rename to arch/arm/plat-samsung/include/plat/debug-macro.S
index 3634d4e..dc6efd9 100644
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
*
* Copyright 2005, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -11,6 +11,18 @@
#include <plat/regs-serial.h>
+/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+
+ .macro fifo_level_s5pv210 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ and \rd, \rd, #S5PV210_UFSTAT_TXMASK
+ .endm
+
+ .macro fifo_full_s5pv210 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ tst \rd, #S5PV210_UFSTAT_TXFULL
+ .endm
+
/* The S3C2440 implementations are used by default as they are the
* most widely re-used */
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
similarity index 87%
rename from arch/arm/plat-s3c/include/plat/devs.h
rename to arch/arm/plat-samsung/include/plat/devs.h
index c1c20b0..796d242 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
+/* arch/arm/plat-samsung/include/plat/devs.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -18,6 +18,7 @@
extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+extern struct s3c24xx_uart_resources s5p_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
@@ -28,12 +29,18 @@
extern struct platform_device s3c64xx_device_iis1;
extern struct platform_device s3c64xx_device_iisv4;
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c64xx_device_ac97;
+
extern struct platform_device s3c_device_ts;
+
extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/dma-core.h
rename to arch/arm/plat-samsung/include/plat/dma-core.h
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
similarity index 94%
rename from arch/arm/plat-s3c24xx/include/plat/dma-plat.h
rename to arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 9565ead..336d5ac 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C24XX DMA support
+ * Samsung S3C24XX DMA support - per SoC functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/dma.h
rename to arch/arm/plat-samsung/include/plat/dma.h
index e429d10..7584d75 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
+/* arch/arm/plat-samsung/include/plat/dma.h
*
* Copyright (C) 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/fb.h
rename to arch/arm/plat-samsung/include/plat/fb.h
index f8db879..ffc01a7 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/fb.h
+/* arch/arm/plat-samsung/include/plat/fb.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
rename to arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/gpio-cfg.h
rename to arch/arm/plat-samsung/include/plat/gpio-cfg.h
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
similarity index 76%
rename from arch/arm/plat-s3c/include/plat/gpio-core.h
rename to arch/arm/plat-samsung/include/plat/gpio-core.h
index 32af612..49ff406 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -11,6 +11,11 @@
* published by the Free Software Foundation.
*/
+#define GPIOCON_OFF (0x00)
+#define GPIODAT_OFF (0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
/* Define the core gpiolib support functions that the s3c platforms may
* need to extend or change depending on the hardware and the s3c chip
* selected at build or found at run time.
@@ -80,6 +85,29 @@
* and any other necessary functions.
*/
+/**
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+ int nr_chips);
+extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+ int nr_chips);
+
+extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
+extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
+
#ifdef CONFIG_S3C_GPIO_TRACK
extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -90,6 +118,8 @@
#else
/* machine specific code should provide s3c_gpiolib_getchip */
+#include <mach/gpio-track.h>
+
static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
#endif
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/hwmon.h
rename to arch/arm/plat-samsung/include/plat/hwmon.h
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/iic-core.h
rename to arch/arm/plat-samsung/include/plat/iic-core.h
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/iic.h
rename to arch/arm/plat-samsung/include/plat/iic.h
diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h
new file mode 100644
index 0000000..a9331e4
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-uart.h
@@ -0,0 +1,20 @@
+/* arch/arm/plat-samsung/include/plat/irq-uart.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c_uart_irq {
+ void __iomem *regs;
+ unsigned int base_irq;
+ unsigned int parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+
diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
new file mode 100644
index 0000000..a90b534
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
@@ -0,0 +1,13 @@
+/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC IRQ VIC timer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer);
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/map-base.h
rename to arch/arm/plat-samsung/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/nand.h
rename to arch/arm/plat-samsung/include/plat/nand.h
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/pm.h
rename to arch/arm/plat-samsung/include/plat/pm.h
index 7a79719..245836d 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
+/* arch/arm/plat-samsung/include/plat/pm.h
*
* Copyright (c) 2004 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -111,7 +111,7 @@
/* PM debug functions */
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
/**
* s3c_pm_dbg() - low level debug function for use in suspend/resume.
* @msg: The message to print.
@@ -141,7 +141,7 @@
/* suspend memory checking */
-#ifdef CONFIG_S3C2410_PM_CHECK
+#ifdef CONFIG_SAMSUNG_PM_CHECK
extern void s3c_pm_check_prepare(void);
extern void s3c_pm_check_restore(void);
extern void s3c_pm_check_cleanup(void);
diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-ac97.h
rename to arch/arm/plat-samsung/include/plat/regs-ac97.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
similarity index 90%
rename from arch/arm/plat-s3c/include/plat/regs-adc.h
rename to arch/arm/plat-samsung/include/plat/regs-adc.h
index 4323ccc..7554c4f 100644
--- a/arch/arm/plat-s3c/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -19,9 +19,13 @@
#define S3C2410_ADCDLY S3C2410_ADCREG(0x08)
#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C)
#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14)
+#define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20)
/* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL (1<<16)
#define S3C2410_ADCCON_ECFLG (1<<15)
#define S3C2410_ADCCON_PRSCEN (1<<14)
#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6)
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/regs-fb-v4.h
rename to arch/arm/plat-samsung/include/plat/regs-fb-v4.h
index a60ed0d..0f43599 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
similarity index 99%
rename from arch/arm/plat-s3c/include/plat/regs-fb.h
rename to arch/arm/plat-samsung/include/plat/regs-fb.h
index e9ee599..0ef806e 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb.h
+/* arch/arm/plat-samsung/include/plat/regs-fb.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-iic.h
rename to arch/arm/plat-samsung/include/plat/regs-iic.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-irqtype.h
rename to arch/arm/plat-samsung/include/plat/regs-irqtype.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-nand.h
rename to arch/arm/plat-samsung/include/plat/regs-nand.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-rtc.h
rename to arch/arm/plat-samsung/include/plat/regs-rtc.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
rename to arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-sdhci.h
rename to arch/arm/plat-samsung/include/plat/regs-sdhci.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
similarity index 87%
rename from arch/arm/plat-s3c/include/plat/regs-serial.h
rename to arch/arm/plat-samsung/include/plat/regs-serial.h
index 85d8904..a6eba84 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+/* arch/arm/plat-samsung/include/plat/regs-serial.h
*
* From linux/include/asm-arm/hardware/serial_s3c2410.h
*
@@ -194,6 +194,36 @@
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
+/* Following are specific to S5PV210 and S5P6442 */
+#define S5PV210_UCON_CLKMASK (1<<10)
+#define S5PV210_UCON_PCLK (0<<10)
+#define S5PV210_UCON_UCLK (1<<10)
+
+#define S5PV210_UFCON_TXTRIG0 (0<<8)
+#define S5PV210_UFCON_TXTRIG4 (1<<8)
+#define S5PV210_UFCON_TXTRIG8 (2<<8)
+#define S5PV210_UFCON_TXTRIG16 (3<<8)
+#define S5PV210_UFCON_TXTRIG32 (4<<8)
+#define S5PV210_UFCON_TXTRIG64 (5<<8)
+#define S5PV210_UFCON_TXTRIG128 (6<<8)
+#define S5PV210_UFCON_TXTRIG256 (7<<8)
+
+#define S5PV210_UFCON_RXTRIG1 (0<<4)
+#define S5PV210_UFCON_RXTRIG4 (1<<4)
+#define S5PV210_UFCON_RXTRIG8 (2<<4)
+#define S5PV210_UFCON_RXTRIG16 (3<<4)
+#define S5PV210_UFCON_RXTRIG32 (4<<4)
+#define S5PV210_UFCON_RXTRIG64 (5<<4)
+#define S5PV210_UFCON_RXTRIG128 (6<<4)
+#define S5PV210_UFCON_RXTRIG256 (7<<4)
+
+#define S5PV210_UFSTAT_TXFULL (1<<24)
+#define S5PV210_UFSTAT_RXFULL (1<<8)
+#define S5PV210_UFSTAT_TXMASK (255<<16)
+#define S5PV210_UFSTAT_TXSHIFT (16)
+#define S5PV210_UFSTAT_RXMASK (255<<0)
+#define S5PV210_UFSTAT_RXSHIFT (0)
+
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-timer.h
rename to arch/arm/plat-samsung/include/plat/regs-timer.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
rename to arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
rename to arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/regs-watchdog.h
rename to arch/arm/plat-samsung/include/plat/regs-watchdog.h
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
new file mode 100644
index 0000000..d177241
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -0,0 +1,67 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ * Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ * @set_level: CS line control.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+ u8 fb_delay;
+ unsigned line;
+ void (*set_level)(unsigned line_id, int lvl);
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @src_clk_name: Platform name of the corresponding clock.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
+ * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
+ * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ */
+struct s3c64xx_spi_info {
+ int src_clk_nr;
+ char *src_clk_name;
+
+ int num_cs;
+
+ int (*cfg_gpio)(struct platform_device *pdev);
+
+ /* Following two fields are for future compatibility */
+ int fifo_lvl_mask;
+ int rx_lvl_offset;
+ int high_speed;
+};
+
+/**
+ * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ * initialization code.
+ * @cntrlr: SPI controller number the configuration is for.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+
+#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
similarity index 87%
rename from arch/arm/plat-s3c/include/plat/sdhci.h
rename to arch/arm/plat-samsung/include/plat/sdhci.h
index 5319867..7d07cd7 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -78,8 +78,8 @@
/* S3C6400 SDHCI setup */
-#ifdef CONFIG_S3C6400_SETUP_SDHCI
-extern char *s3c6400_hsmmc_clksrcs[4];
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+extern char *s3c64xx_hsmmc_clksrcs[4];
#ifdef CONFIG_S3C_DEV_HSMMC
extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
@@ -89,7 +89,7 @@
static inline void s3c6400_default_sdhci0(void)
{
- s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
@@ -101,7 +101,7 @@
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6400_default_sdhci1(void)
{
- s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
@@ -112,7 +112,7 @@
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6400_default_sdhci2(void)
{
- s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
@@ -120,27 +120,19 @@
static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6400_SETUP_SDHCI */
-
/* S3C6410 SDHCI setup */
-#ifdef CONFIG_S3C6410_SETUP_SDHCI
-extern char *s3c6410_hsmmc_clksrcs[4];
-
-extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
+extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s3c6410_default_sdhci0(void)
{
- s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+ s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
}
#else
static inline void s3c6410_default_sdhci0(void) { }
@@ -149,9 +141,9 @@
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6410_default_sdhci1(void)
{
- s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+ s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
}
#else
static inline void s3c6410_default_sdhci1(void) { }
@@ -160,9 +152,9 @@
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6410_default_sdhci2(void)
{
- s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+ s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
}
#else
static inline void s3c6410_default_sdhci2(void) { }
@@ -171,7 +163,10 @@
#else
static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
/* S5PC100 SDHCI setup */
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
similarity index 93%
rename from arch/arm/plat-s3c/include/plat/udc-hs.h
rename to arch/arm/plat-samsung/include/plat/udc-hs.h
index dd04db0..a22a4f2 100644
--- a/arch/arm/plat-s3c/include/plat/udc-hs.h
+++ b/arch/arm/plat-samsung/include/plat/udc-hs.h
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
-enum s3c_hostg_dmamode {
+enum s3c_hsotg_dmamode {
S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */
S3C_HSOTG_DMA_ONLY, /* always use DMA */
S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */
@@ -24,6 +24,6 @@
* @is_osc: The clock source is an oscillator, not a crystal
*/
struct s3c_hsotg_plat {
- enum s3c_hostg_dmamode dma;
+ enum s3c_hsotg_dmamode dma;
unsigned int is_osc : 1;
};
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/uncompress.h
rename to arch/arm/plat-samsung/include/plat/uncompress.h
index dc66a47..e87ce8f 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
+/* arch/arm/plat-samsung/include/plat/uncompress.h
*
* Copyright 2003, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
similarity index 88%
rename from arch/arm/plat-s3c/include/plat/usb-control.h
rename to arch/arm/plat-samsung/include/plat/usb-control.h
index 822c87f..7fa1fbe 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-samsung/include/plat/usb-control.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/usb-control.h
+/* arch/arm/plat-samsung/include/plat/usb-control.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -38,4 +38,6 @@
}
}
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/watchdog-reset.h
rename to arch/arm/plat-samsung/include/plat/watchdog-reset.h
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-samsung/init.c
similarity index 100%
rename from arch/arm/plat-s3c/init.c
rename to arch/arm/plat-samsung/init.c
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
new file mode 100644
index 0000000..4f8c102
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -0,0 +1,143 @@
+/* arch/arm/plat-samsung/irq-uart.c
+ * originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Samsung- UART Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-uart.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+ struct s3c_uart_irq *uirq = get_irq_chip_data(irq);
+ return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+ return irq & 3;
+}
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg &= ~(1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+ struct s3c_uart_irq *uirq = desc->handler_data;
+ u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+ int base = uirq->base_irq;
+
+ if (pend & (1 << 0))
+ generic_handle_irq(base);
+ if (pend & (1 << 1))
+ generic_handle_irq(base + 1);
+ if (pend & (1 << 2))
+ generic_handle_irq(base + 2);
+ if (pend & (1 << 3))
+ generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+ .name = "s3c-uart",
+ .mask = s3c_irq_uart_mask,
+ .unmask = s3c_irq_uart_unmask,
+ .mask_ack = s3c_irq_uart_maskack,
+ .ack = s3c_irq_uart_ack,
+};
+
+static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
+{
+ struct irq_desc *desc = irq_to_desc(uirq->parent_irq);
+ void __iomem *reg_base = uirq->regs;
+ unsigned int irq;
+ int offs;
+
+ /* mask all interrupts at the start. */
+ __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+ for (offs = 0; offs < 3; offs++) {
+ irq = uirq->base_irq + offs;
+
+ set_irq_chip(irq, &s3c_irq_uart);
+ set_irq_chip_data(irq, uirq);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ desc->handler_data = uirq;
+ set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+/**
+ * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
+ * @irq: The interrupt data for registering
+ * @nr_irqs: The number of interrupt descriptions in @irq.
+ *
+ * Register the UART interrupts specified by @irq including the demuxing
+ * routines. This supports the S3C6400 and newer style of devices.
+ */
+void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
+{
+ for (; nr_irqs > 0; nr_irqs--, irq++)
+ s3c_init_uart_irq(irq);
+}
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
new file mode 100644
index 0000000..0270519
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -0,0 +1,86 @@
+/* arch/arm/plat-samsung/irq-vic-timer.c
+ * originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-timer.h>
+
+static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
+{
+ generic_handle_irq((int)desc->handler_data);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg &= ~(1 << (irq - IRQ_TIMER0));
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg |= 1 << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f;
+ reg |= (1 << 5) << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+ .name = "s3c-timer",
+ .mask = s3c_irq_timer_mask,
+ .unmask = s3c_irq_timer_unmask,
+ .ack = s3c_irq_timer_ack,
+};
+
+/**
+ * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
+ * @parent_irq: The parent IRQ on the VIC for the timer.
+ * @timer_irq: The IRQ to be used for the timer.
+ *
+ * Register the necessary IRQ chaining and support for the timer IRQs
+ * chained of the VIC.
+ */
+void __init s3c_init_vic_timer_irq(unsigned int parent_irq,
+ unsigned int timer_irq)
+{
+ struct irq_desc *desc = irq_to_desc(parent_irq);
+
+ set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
+
+ set_irq_chip(timer_irq, &s3c_irq_timer);
+ set_irq_handler(timer_irq, handle_level_irq);
+ set_irq_flags(timer_irq, IRQF_VALID);
+
+ desc->handler_data = (void *)timer_irq;
+}
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-samsung/pm-check.c
similarity index 95%
rename from arch/arm/plat-s3c/pm-check.c
rename to arch/arm/plat-samsung/pm-check.c
index 8eb1f43..0b5bb77 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -20,8 +20,8 @@
#include <plat/pm.h>
-#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
#endif
/* suspend checking code...
@@ -29,12 +29,12 @@
* this next area does a set of crc checks over all the installed
* memory, so the system can verify if the resume was ok.
*
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
* increasing it will mean that the area corrupted will be less easy to spot,
* and reducing the size will cause the CRC save area to grow
*/
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
static u32 crc_size; /* size needed for the crc block */
static u32 *crcs; /* allocated over suspend/resume */
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
similarity index 99%
rename from arch/arm/plat-s3c/pm-gpio.c
rename to arch/arm/plat-samsung/pm-gpio.c
index cfd326a..69a4c7f 100644
--- a/arch/arm/plat-s3c/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -19,7 +19,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
#include <plat/pm.h>
/* PM GPIO helpers */
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-samsung/pm.c
similarity index 98%
rename from arch/arm/plat-s3c/pm.c
rename to arch/arm/plat-samsung/pm.c
index 7674706..27cfca5 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -29,7 +29,7 @@
#include <asm/irq.h>
#include <plat/pm.h>
-#include <plat/pm-core.h>
+#include <mach/pm-core.h>
/* for external use */
@@ -41,7 +41,7 @@
* resume before the console layer is available.
*/
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
extern void printascii(const char *);
void s3c_pm_dbg(const char *fmt, ...)
@@ -65,13 +65,13 @@
#else
#define s3c_pm_debug_init() do { } while(0)
-#endif /* CONFIG_S3C2410_PM_DEBUG */
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
/* Save the UART configurations if we are configured for debug. */
unsigned char pm_uart_udivslot;
-#ifdef CONFIG_S3C2410_PM_DEBUG
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
similarity index 82%
rename from arch/arm/plat-s3c/pwm-clock.c
rename to arch/arm/plat-samsung/pwm-clock.c
index a318215..46c9381 100644
--- a/arch/arm/plat-s3c/pwm-clock.c
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -130,20 +130,22 @@
return 0;
}
+static struct clk_ops clk_pwm_scaler_ops = {
+ .get_rate = clk_pwm_scaler_get_rate,
+ .set_rate = clk_pwm_scaler_set_rate,
+ .round_rate = clk_pwm_scaler_round_rate,
+};
+
static struct clk clk_timer_scaler[] = {
[0] = {
.name = "pwm-scaler0",
.id = -1,
- .get_rate = clk_pwm_scaler_get_rate,
- .set_rate = clk_pwm_scaler_set_rate,
- .round_rate = clk_pwm_scaler_round_rate,
+ .ops = &clk_pwm_scaler_ops,
},
[1] = {
.name = "pwm-scaler1",
.id = -1,
- .get_rate = clk_pwm_scaler_get_rate,
- .set_rate = clk_pwm_scaler_set_rate,
- .round_rate = clk_pwm_scaler_round_rate,
+ .ops = &clk_pwm_scaler_ops,
},
};
@@ -256,50 +258,46 @@
return 0;
}
+static struct clk_ops clk_tdiv_ops = {
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+};
+
static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[0] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[0],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[0],
},
},
[1] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[0],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[0],
}
},
[2] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[1],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[1],
},
},
[3] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[1],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[1],
},
},
[4] = {
.clk = {
- .name = "pwm-tdiv",
- .parent = &clk_timer_scaler[1],
- .get_rate = clk_pwm_tdiv_get_rate,
- .set_rate = clk_pwm_tdiv_set_rate,
- .round_rate = clk_pwm_tdiv_round_rate,
+ .name = "pwm-tdiv",
+ .ops = &clk_tdiv_ops,
+ .parent = &clk_timer_scaler[1],
},
},
};
@@ -356,31 +354,35 @@
return 0;
}
+static struct clk_ops clk_tin_ops = {
+ .set_parent = clk_pwm_tin_set_parent,
+};
+
static struct clk clk_tin[] = {
[0] = {
- .name = "pwm-tin",
- .id = 0,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 0,
+ .ops = &clk_tin_ops,
},
[1] = {
- .name = "pwm-tin",
- .id = 1,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 1,
+ .ops = &clk_tin_ops,
},
[2] = {
- .name = "pwm-tin",
- .id = 2,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 2,
+ .ops = &clk_tin_ops,
},
[3] = {
- .name = "pwm-tin",
- .id = 3,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 3,
+ .ops = &clk_tin_ops,
},
[4] = {
- .name = "pwm-tin",
- .id = 4,
- .set_parent = clk_pwm_tin_set_parent,
+ .name = "pwm-tin",
+ .id = 4,
+ .ops = &clk_tin_ops,
},
};
@@ -428,25 +430,15 @@
return;
}
- for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
clk_timer_scaler[clk].parent = clk_timers;
- ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
- if (ret < 0) {
- printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
- return;
- }
- }
- for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
- ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
- if (ret < 0) {
- printk(KERN_ERR "error adding pww tclk%d\n", clk);
- return;
- }
- }
+ s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
+ s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
ret = clk_pwm_tdiv_register(clk);
+
if (ret < 0) {
printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
return;
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-samsung/pwm.c
similarity index 100%
rename from arch/arm/plat-s3c/pwm.c
rename to arch/arm/plat-samsung/pwm.c
diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-samsung/time.c
similarity index 99%
rename from arch/arm/plat-s3c/time.c
rename to arch/arm/plat-samsung/time.c
index 3b27b29..2231d80 100644
--- a/arch/arm/plat-s3c/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/time.c
+/* linux/arch/arm/plat-samsung/time.c
*
* Copyright (C) 2003-2005 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
diff --git a/drivers/Makefile b/drivers/Makefile
index 81e3659..34f1e10 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -99,6 +99,7 @@
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
+obj-$(CONFIG_ARCH_SHMOBILE) += sh/
obj-$(CONFIG_GENERIC_TIME) += clocksource/
obj-$(CONFIG_DMA_ENGINE) += dma/
obj-$(CONFIG_DCA) += dca/
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index 9caed30..b1ab298 100644
--- a/drivers/input/keyboard/locomokbd.c
+++ b/drivers/input/keyboard/locomokbd.c
@@ -192,11 +192,18 @@
static irqreturn_t locomokbd_interrupt(int irq, void *dev_id)
{
struct locomokbd *locomokbd = dev_id;
+ u16 r;
+
+ r = locomo_readl(locomokbd->base + LOCOMO_KIC);
+ if ((r & 0x0001) == 0)
+ return IRQ_HANDLED;
+
+ locomo_writel(r & ~0x0100, locomokbd->base + LOCOMO_KIC); /* Ack */
+
/** wait chattering delay **/
udelay(100);
locomokbd_scankeyboard(locomokbd);
-
return IRQ_HANDLED;
}
@@ -210,6 +217,25 @@
locomokbd_scankeyboard(locomokbd);
}
+static int locomokbd_open(struct input_dev *dev)
+{
+ struct locomokbd *locomokbd = input_get_drvdata(dev);
+ u16 r;
+
+ r = locomo_readl(locomokbd->base + LOCOMO_KIC) | 0x0010;
+ locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+ return 0;
+}
+
+static void locomokbd_close(struct input_dev *dev)
+{
+ struct locomokbd *locomokbd = input_get_drvdata(dev);
+ u16 r;
+
+ r = locomo_readl(locomokbd->base + LOCOMO_KIC) & ~0x0010;
+ locomo_writel(r, locomokbd->base + LOCOMO_KIC);
+}
+
static int __devinit locomokbd_probe(struct locomo_dev *dev)
{
struct locomokbd *locomokbd;
@@ -253,6 +279,8 @@
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
+ input_dev->open = locomokbd_open;
+ input_dev->close = locomokbd_close;
input_dev->dev.parent = &dev->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
@@ -261,6 +289,8 @@
input_dev->keycodesize = sizeof(locomokbd_keycode[0]);
input_dev->keycodemax = ARRAY_SIZE(locomokbd_keycode);
+ input_set_drvdata(input_dev, locomokbd);
+
memcpy(locomokbd->keycode, locomokbd_keycode, sizeof(locomokbd->keycode));
for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
set_bit(locomokbd->keycode[i], input_dev->keybit);
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index c48cad2..30e12c8 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -118,7 +118,7 @@
{
struct platform_device *dev;
struct resource res = { };
- phys_addr_t base = region.base;
+ phys_addr_t base = region->base;
int ret;
if (base == ~0)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index bb64656..1157d56 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -444,7 +444,7 @@
config MTD_NAND_MXC
tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX3
+ depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
help
This enables the driver for the NAND flash controller on the
MXC processors.
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index de6bc33..db79ca6 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -21,11 +21,18 @@
#include "sa1111_generic.h"
+#define IDX_IRQ_S0_READY_NINT (0)
+#define IDX_IRQ_S0_CD_VALID (1)
+#define IDX_IRQ_S0_BVD1_STSCHG (2)
+#define IDX_IRQ_S1_READY_NINT (3)
+#define IDX_IRQ_S1_CD_VALID (4)
+#define IDX_IRQ_S1_BVD1_STSCHG (5)
+
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_S0_CD_VALID, "SA1111 PCMCIA card detect" },
- { 0, IRQ_S0_BVD1_STSCHG, "SA1111 PCMCIA BVD1" },
- { 1, IRQ_S1_CD_VALID, "SA1111 CF card detect" },
- { 1, IRQ_S1_BVD1_STSCHG, "SA1111 CF BVD1" },
+ { 0, NO_IRQ, "SA1111 PCMCIA card detect" },
+ { 0, NO_IRQ, "SA1111 PCMCIA BVD1" },
+ { 1, NO_IRQ, "SA1111 CF card detect" },
+ { 1, NO_IRQ, "SA1111 CF BVD1" },
};
static int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -136,7 +143,9 @@
s->soc.ops = ops;
s->soc.socket.owner = ops->owner;
s->soc.socket.dev.parent = &dev->dev;
- s->soc.socket.pci_irq = s->soc.nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT;
+ s->soc.socket.pci_irq = s->soc.nr ?
+ dev->irq[IDX_IRQ_S0_READY_NINT] :
+ dev->irq[IDX_IRQ_S1_READY_NINT];
s->dev = dev;
ret = add(&s->soc);
@@ -162,6 +171,12 @@
base = dev->mapbase;
+ /* Initialize PCMCIA IRQs */
+ irqs[0].irq = dev->irq[IDX_IRQ_S0_CD_VALID];
+ irqs[1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG];
+ irqs[2].irq = dev->irq[IDX_IRQ_S1_CD_VALID];
+ irqs[3].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG];
+
/*
* Initialise the suspend state.
*/
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ff733..f55c494 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@
provide all of these ports, depending on how the serial port
pins are configured.
+config SERIAL_SAMSUNG_UARTS_4
+ bool
+ depends on ARM && PLAT_SAMSUNG
+ default y if CPU_S3C2443
+ help
+ Internal node for the common case of 4 Samsung compatible UARTs
+
config SERIAL_SAMSUNG_UARTS
int
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
- default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+ default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+ tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400 and S3C6410
+ Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
SoCs
config SERIAL_S5PC100
tristate "Samsung S5PC100 Serial port support"
depends on SERIAL_SAMSUNG && CPU_S5PC100
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
Serial port support for the Samsung S5PC100 SoCs
+config SERIAL_S5PV210
+ tristate "Samsung S5PV210 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+ select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+ default y
+ help
+ Serial port support for Samsung's S5P Family of SoC's
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
@@ -996,7 +1013,7 @@
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on HAVE_CLK && (SUPERH || H8300)
+ depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5548fe7..6aa4723 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index d00fcf8..e579d7a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -440,7 +440,7 @@
temp = readl(sport->port.membase + USR2);
if (temp & USR2_BRCD) {
- writel(temp | USR2_BRCD, sport->port.membase + USR2);
+ writel(USR2_BRCD, sport->port.membase + USR2);
if (uart_handle_break(&sport->port))
continue;
}
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28..1700b1a 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@
.name = "Samsung S3C2412 UART",
.type = PORT_S3C2412,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
new file mode 100644
index 0000000..8dc0383
--- /dev/null
+++ b/drivers/serial/s5pv210.c
@@ -0,0 +1,154 @@
+/* linux/drivers/serial/s5pv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S5PV210 SoC UARTs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/regs-serial.h>
+#include "samsung.h"
+
+static int s5pv210_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ if (strcmp(clk->name, "pclk") == 0)
+ ucon &= ~S5PV210_UCON_CLKMASK;
+ else if (strcmp(clk->name, "uclk1") == 0)
+ ucon |= S5PV210_UCON_CLKMASK;
+ else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s5pv210_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ u32 ucon = rd_regl(port, S3C2410_UCON);
+
+ clk->divisor = 1;
+
+ switch (ucon & S5PV210_UCON_CLKMASK) {
+ case S5PV210_UCON_PCLK:
+ clk->name = "pclk";
+ break;
+ case S5PV210_UCON_UCLK:
+ clk->name = "uclk1";
+ break;
+ }
+
+ return 0;
+}
+
+static int s5pv210_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ ucon &= S5PV210_UCON_CLKMASK;
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+#define S5PV210_UART_DEFAULT_INFO(fifo_size) \
+ .name = "Samsung S5PV210 UART0", \
+ .type = PORT_S3C6400, \
+ .fifosize = fifo_size, \
+ .has_divslot = 1, \
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
+ .get_clksrc = s5pv210_serial_getsource, \
+ .set_clksrc = s5pv210_serial_setsource, \
+ .reset_port = s5pv210_serial_resetport
+
+static struct s3c24xx_uart_info s5p_port_fifo256 = {
+ S5PV210_UART_DEFAULT_INFO(256),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo64 = {
+ S5PV210_UART_DEFAULT_INFO(64),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo16 = {
+ S5PV210_UART_DEFAULT_INFO(16),
+};
+
+static struct s3c24xx_uart_info *s5p_uart_inf[] = {
+ [0] = &s5p_port_fifo256,
+ [1] = &s5p_port_fifo64,
+ [2] = &s5p_port_fifo16,
+ [3] = &s5p_port_fifo16,
+};
+
+/* device management */
+static int s5p_serial_probe(struct platform_device *pdev)
+{
+ return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
+}
+
+static struct platform_driver s5p_serial_drv = {
+ .probe = s5p_serial_probe,
+ .remove = __devexit_p(s3c24xx_serial_remove),
+ .driver = {
+ .name = "s5pv210-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s5pv210_serial_console_init(void)
+{
+ return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+}
+
+console_initcall(s5pv210_serial_console_init);
+
+static int __init s5p_serial_init(void)
+{
+ return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+}
+
+static void __exit s5p_serial_exit(void)
+{
+ platform_driver_unregister(&s5p_serial_drv);
+}
+
+module_init(s5p_serial_init);
+module_exit(s5p_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5pv210-uart");
+MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df1..6982243 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1374,7 +1374,7 @@
* data.
*/
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
{
struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
struct platform_device **platdev_ptr;
@@ -1385,7 +1385,7 @@
platdev_ptr = s3c24xx_uart_devs;
for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
- s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+ s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
}
return 0;
@@ -1451,7 +1451,7 @@
};
int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info *info)
+ struct s3c24xx_uart_info **info)
{
struct platform_device *dev = s3c24xx_uart_devs[0];
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 1fb2234..0ac06a0 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -75,19 +75,24 @@
extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info *uart);
+ struct s3c24xx_uart_info **uart);
extern int s3c24xx_serial_init(struct platform_driver *drv,
struct s3c24xx_uart_info *info);
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
-#define s3c24xx_console_init(__drv, __inf) \
-static int __init s3c_serial_console_init(void) \
-{ \
- return s3c24xx_serial_initconsole(__drv, __inf); \
-} \
- \
+#define s3c24xx_console_init(__drv, __inf) \
+static int __init s3c_serial_console_init(void) \
+{ \
+ struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \
+ int i; \
+ \
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \
+ uinfo[i] = __inf; \
+ return s3c24xx_serial_initconsole(__drv, uinfo); \
+} \
+ \
console_initcall(s3c_serial_console_init)
#else
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f7d2589..fad67d3 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -30,7 +30,8 @@
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define PORT_PTCR 0xA405011EUL
# define PORT_PVCR 0xA4050122UL
@@ -228,7 +229,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
# define SCIF_ORER 0x0200
# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
# define SCIF_RFDC_MASK 0x007f
@@ -261,7 +263,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
@@ -356,7 +359,7 @@
SCI_OUT(sci_size, sci_offset, value); \
}
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -366,7 +369,8 @@
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -401,7 +405,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -413,7 +418,7 @@
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
-SCIF_FNS(SCLSR, 0x24, 16)
+SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
@@ -583,7 +588,8 @@
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 3a5a17d..c275039 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -762,6 +762,10 @@
if (desc->hw.ack_regs)
ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
}
static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -1024,8 +1028,12 @@
out_unlock:
spin_unlock_irqrestore(&vector_lock, flags);
- if (irq > 0)
+ if (irq > 0) {
dynamic_irq_init(irq);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID); /* Enable IRQ on ARM systems */
+#endif
+ }
return irq;
}
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3..20a802e 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
#include <linux/fsl_devices.h>
#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
static struct clk *mxc_ahb_clk;
static struct clk *mxc_usb_clk;
@@ -28,14 +30,16 @@
pdata = pdev->dev.platform_data;
- mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
- if (IS_ERR(mxc_ahb_clk))
- return PTR_ERR(mxc_ahb_clk);
+ if (!cpu_is_mx35()) {
+ mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+ if (IS_ERR(mxc_ahb_clk))
+ return PTR_ERR(mxc_ahb_clk);
- ret = clk_enable(mxc_ahb_clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
- goto eenahb;
+ ret = clk_enable(mxc_ahb_clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+ goto eenahb;
+ }
}
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+ ret = -EINVAL;
goto eclkrate;
}
@@ -66,9 +71,11 @@
clk_put(mxc_usb_clk);
mxc_usb_clk = NULL;
egusb:
- clk_disable(mxc_ahb_clk);
+ if (!cpu_is_mx35())
+ clk_disable(mxc_ahb_clk);
eenahb:
- clk_put(mxc_ahb_clk);
+ if (!cpu_is_mx35())
+ clk_put(mxc_ahb_clk);
return ret;
}
@@ -90,6 +97,8 @@
clk_disable(mxc_usb_clk);
clk_put(mxc_usb_clk);
}
- clk_disable(mxc_ahb_clk);
- clk_put(mxc_ahb_clk);
+ if (!cpu_is_mx35()) {
+ clk_disable(mxc_ahb_clk);
+ clk_put(mxc_ahb_clk);
+ }
}
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e6fedbd..be5fb34 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -65,6 +65,10 @@
#include <mach/pxa25x-udc.h>
#endif
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <mach/lubbock.h>
+#endif
+
#include <asm/mach/udc_pxa2xx.h>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7e5bf59..f742c8e 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,7 +30,7 @@
#include <plat/regs-usb-hsotg-phy.h>
#include <plat/regs-usb-hsotg.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
#include <plat/udc-hs.h>
#define DMA_ADDR_INVALID (~((dma_addr_t)0))
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3e5b4490..1c60053 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,9 +400,12 @@
If you plan to use the LCD display with your SA-1100 system, say
Y here.
+config HAVE_FB_IMX
+ bool
+
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && (ARCH_MX1 || ARCH_MX2)
+ depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 6fdca97..88eec38 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -22,7 +22,6 @@
#include <asm/irq.h>
#include <mach/regs-ac97.h>
-#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
static DEFINE_MUTEX(car_mutex);
@@ -32,6 +31,8 @@
static struct clk *ac97conf_clk;
static int reset_gpio;
+extern void pxa27x_assert_ac97reset(int reset_gpio, int on);
+
/*
* Beware PXA27x bugs:
*
@@ -42,45 +43,6 @@
* 1 jiffy timeout if interrupt never comes).
*/
-enum {
- RESETGPIO_FORCE_HIGH,
- RESETGPIO_FORCE_LOW,
- RESETGPIO_NORMAL_ALTFUNC
-};
-
-/**
- * set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
- * @mode: chosen action
- *
- * As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
- * must be done to insure proper work of AC97 reset line. This function
- * computes the correct gpio_mode for further use by reset functions, and
- * applied the change through pxa_gpio_mode.
- */
-static void set_resetgpio_mode(int resetgpio_action)
-{
- int mode = 0;
-
- if (reset_gpio)
- switch (resetgpio_action) {
- case RESETGPIO_NORMAL_ALTFUNC:
- if (reset_gpio == 113)
- mode = 113 | GPIO_ALT_FN_2_OUT;
- if (reset_gpio == 95)
- mode = 95 | GPIO_ALT_FN_1_OUT;
- break;
- case RESETGPIO_FORCE_LOW:
- mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
- break;
- case RESETGPIO_FORCE_HIGH:
- mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
- break;
- };
-
- if (mode)
- pxa_gpio_mode(mode);
-}
-
unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
{
unsigned short val = -1;
@@ -174,12 +136,11 @@
{
gsr_bits = 0;
- /* warm reset broken on Bulverde,
- so manually keep AC97 reset high */
- set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
+ /* warm reset broken on Bulverde, so manually keep AC97 reset high */
+ pxa27x_assert_ac97reset(reset_gpio, 1);
udelay(10);
GCR |= GCR_WARM_RST;
- set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+ pxa27x_assert_ac97reset(reset_gpio, 0);
udelay(500);
}
@@ -345,16 +306,6 @@
int pxa2xx_ac97_hw_resume(void)
{
- if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
- pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
- pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
- pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
- }
- if (cpu_is_pxa27x()) {
- /* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
- set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
- }
clk_enable(ac97_clk);
return 0;
}
@@ -386,16 +337,9 @@
reset_gpio = 113;
}
- if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
- pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
- pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
- pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
- }
-
if (cpu_is_pxa27x()) {
/* Use GPIO 113 as AC97 Reset on Bulverde */
- set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
+ pxa27x_assert_ac97reset(reset_gpio, 0);
ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
if (IS_ERR(ac97conf_clk)) {
ret = PTR_ERR(ac97conf_clk);
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index e69397f..9e95e51 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -42,11 +42,14 @@
* SSP audio private data
*/
struct ssp_priv {
- struct ssp_dev dev;
+ struct ssp_device *ssp;
unsigned int sysclk;
int dai_fmt;
#ifdef CONFIG_PM
- struct ssp_state state;
+ uint32_t cr0;
+ uint32_t cr1;
+ uint32_t to;
+ uint32_t psp;
#endif
};
@@ -61,6 +64,22 @@
ssp_read_reg(ssp, SSACD));
}
+static void ssp_enable(struct ssp_device *ssp)
+{
+ uint32_t sscr0;
+
+ sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE;
+ __raw_writel(sscr0, ssp->mmio_base + SSCR0);
+}
+
+static void ssp_disable(struct ssp_device *ssp)
+{
+ uint32_t sscr0;
+
+ sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE;
+ __raw_writel(sscr0, ssp->mmio_base + SSCR0);
+}
+
struct pxa2xx_pcm_dma_data {
struct pxa2xx_pcm_dma_params params;
char name[20];
@@ -94,13 +113,12 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->ssp;
int ret = 0;
if (!cpu_dai->active) {
- priv->dev.port = cpu_dai->id + 1;
- priv->dev.irq = NO_IRQ;
- clk_enable(priv->dev.ssp->clk);
- ssp_disable(&priv->dev);
+ clk_enable(ssp->clk);
+ ssp_disable(ssp);
}
if (cpu_dai->dma_data) {
@@ -116,10 +134,11 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->ssp;
if (!cpu_dai->active) {
- ssp_disable(&priv->dev);
- clk_disable(priv->dev.ssp->clk);
+ ssp_disable(ssp);
+ clk_disable(ssp->clk);
}
if (cpu_dai->dma_data) {
@@ -133,27 +152,39 @@
static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->ssp;
if (!cpu_dai->active)
- clk_enable(priv->dev.ssp->clk);
+ clk_enable(ssp->clk);
- ssp_save_state(&priv->dev, &priv->state);
- clk_disable(priv->dev.ssp->clk);
+ priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+ priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+ priv->to = __raw_readl(ssp->mmio_base + SSTO);
+ priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
+ ssp_disable(ssp);
+ clk_disable(ssp->clk);
return 0;
}
static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->ssp;
+ uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
- clk_enable(priv->dev.ssp->clk);
- ssp_restore_state(&priv->dev, &priv->state);
+ clk_enable(ssp->clk);
+
+ __raw_writel(sssr, ssp->mmio_base + SSSR);
+ __raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+ __raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
+ __raw_writel(priv->to, ssp->mmio_base + SSTO);
+ __raw_writel(priv->psp, ssp->mmio_base + SSPSP);
if (cpu_dai->active)
- ssp_enable(&priv->dev);
+ ssp_enable(ssp);
else
- clk_disable(priv->dev.ssp->clk);
+ clk_disable(ssp->clk);
return 0;
}
@@ -203,7 +234,7 @@
int clk_id, unsigned int freq, int dir)
{
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
int val;
u32 sscr0 = ssp_read_reg(ssp, SSCR0) &
@@ -244,11 +275,11 @@
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
if (!cpu_is_pxa3xx())
- clk_disable(priv->dev.ssp->clk);
+ clk_disable(ssp->clk);
val = ssp_read_reg(ssp, SSCR0) | sscr0;
ssp_write_reg(ssp, SSCR0, val);
if (!cpu_is_pxa3xx())
- clk_enable(priv->dev.ssp->clk);
+ clk_enable(ssp->clk);
return 0;
}
@@ -260,7 +291,7 @@
int div_id, int div)
{
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
int val;
switch (div_id) {
@@ -311,7 +342,7 @@
int source, unsigned int freq_in, unsigned int freq_out)
{
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70;
#if defined(CONFIG_PXA3xx)
@@ -380,7 +411,7 @@
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
u32 sscr0;
sscr0 = ssp_read_reg(ssp, SSCR0);
@@ -415,7 +446,7 @@
int tristate)
{
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
u32 sscr1;
sscr1 = ssp_read_reg(ssp, SSCR1);
@@ -437,7 +468,7 @@
unsigned int fmt)
{
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
u32 sscr0;
u32 sscr1;
u32 sspsp;
@@ -532,7 +563,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
int chn = params_channels(params);
u32 sscr0;
u32 sspsp;
@@ -642,12 +673,12 @@
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
int ret = 0;
struct ssp_priv *priv = cpu_dai->private_data;
- struct ssp_device *ssp = priv->dev.ssp;
+ struct ssp_device *ssp = priv->ssp;
int val;
switch (cmd) {
case SNDRV_PCM_TRIGGER_RESUME:
- ssp_enable(&priv->dev);
+ ssp_enable(ssp);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
val = ssp_read_reg(ssp, SSCR1);
@@ -666,7 +697,7 @@
else
val |= SSCR1_RSRE;
ssp_write_reg(ssp, SSCR1, val);
- ssp_enable(&priv->dev);
+ ssp_enable(ssp);
break;
case SNDRV_PCM_TRIGGER_STOP:
val = ssp_read_reg(ssp, SSCR1);
@@ -677,7 +708,7 @@
ssp_write_reg(ssp, SSCR1, val);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
- ssp_disable(&priv->dev);
+ ssp_disable(ssp);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
val = ssp_read_reg(ssp, SSCR1);
@@ -707,8 +738,8 @@
if (!priv)
return -ENOMEM;
- priv->dev.ssp = ssp_request(dai->id + 1, "SoC audio");
- if (priv->dev.ssp == NULL) {
+ priv->ssp = ssp_request(dai->id + 1, "SoC audio");
+ if (priv->ssp == NULL) {
ret = -ENODEV;
goto err_priv;
}
@@ -727,7 +758,7 @@
struct snd_soc_dai *dai)
{
struct ssp_priv *priv = dai->private_data;
- ssp_free(priv->dev.ssp);
+ ssp_free(priv->ssp);
}
#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 93ed3aa..a72c251 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -22,8 +22,8 @@
#include <sound/soc.h>
#include <plat/regs-s3c2412-iis.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
#include <plat/gpio-cfg.h>
#include <mach/map.h>