[ARM] S3C64XX: Add <mach/debug-macro.S>
Add the necessary support for the kernel low-level
debug macros via <mach/debug-macro.S>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
new file mode 100644
index 0000000..b18ac52
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c6400/include/mach/hardware.h
new file mode 100644
index 0000000..862d033
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
new file mode 100644
index 0000000..0ee6be0
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+#define S3C_PA_UART (0x7F005000)
+#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
+#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
+#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
+#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET (0x400)
+
+#define S3C64XX_PA_TIMER (0x7F006000)
+
+#define S3C64XX_PA_SDRAM (0x50000000)
+#define S3C64XX_PA_VIC0 (0x71200000)
+#define S3C64XX_PA_VIC1 (0x71300000)
+
+/* place VICs close together */
+#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
+#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER S3C64XX_PA_TIMER
+
+#endif /* __ASM_ARCH_6400_MAP_H */