| # |
| # Hardware monitoring chip drivers configuration |
| # |
| |
| menuconfig HWMON |
| tristate "Hardware Monitoring support" |
| depends on HAS_IOMEM |
| default y |
| help |
| Hardware monitoring devices let you monitor the hardware health |
| of a system. Most modern motherboards include such a device. It |
| can include temperature sensors, voltage sensors, fan speed |
| sensors and various additional features such as the ability to |
| control the speed of the fans. If you want this support you |
| should say Y here and also to the specific driver(s) for your |
| sensors chip(s) below. |
| |
| To find out which specific driver(s) you need, use the |
| sensors-detect script from the lm_sensors package. Read |
| <file:Documentation/hwmon/userspace-tools> for details. |
| |
| This support can also be built as a module. If so, the module |
| will be called hwmon. |
| |
| if HWMON |
| |
| config HWMON_VID |
| tristate |
| default n |
| |
| config HWMON_DEBUG_CHIP |
| bool "Hardware Monitoring Chip debugging messages" |
| default n |
| help |
| Say Y here if you want the I2C chip drivers to produce a bunch of |
| debug messages to the system log. Select this if you are having |
| a problem with I2C support and want to see more of what is going |
| on. |
| |
| comment "Native drivers" |
| |
| config SENSORS_ABITUGURU |
| tristate "Abit uGuru (rev 1 & 2)" |
| depends on X86 && EXPERIMENTAL |
| help |
| If you say yes here you get support for the sensor part of the first |
| and second revision of the Abit uGuru chip. The voltage and frequency |
| control parts of the Abit uGuru are not supported. The Abit uGuru |
| chip can be found on Abit uGuru featuring motherboards (most modern |
| Abit motherboards from before end 2005). For more info and a list |
| of which motherboards have which revision see |
| Documentation/hwmon/abituguru |
| |
| This driver can also be built as a module. If so, the module |
| will be called abituguru. |
| |
| config SENSORS_ABITUGURU3 |
| tristate "Abit uGuru (rev 3)" |
| depends on X86 && EXPERIMENTAL |
| help |
| If you say yes here you get support for the sensor part of the |
| third revision of the Abit uGuru chip. Only reading the sensors |
| and their settings is supported. The third revision of the Abit |
| uGuru chip can be found on recent Abit motherboards (since end |
| 2005). For more info and a list of which motherboards have which |
| revision see Documentation/hwmon/abituguru3 |
| |
| This driver can also be built as a module. If so, the module |
| will be called abituguru3. |
| |
| config SENSORS_AD7414 |
| tristate "Analog Devices AD7414" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Analog Devices |
| AD7414 temperature monitoring chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ad7414. |
| |
| config SENSORS_AD7418 |
| tristate "Analog Devices AD7416, AD7417 and AD7418" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Analog Devices |
| AD7416, AD7417 and AD7418 temperature monitoring chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ad7418. |
| |
| config SENSORS_ADCXX |
| tristate "National Semiconductor ADCxxxSxxx" |
| depends on SPI_MASTER && EXPERIMENTAL |
| help |
| If you say yes here you get support for the National Semiconductor |
| ADC<bb><c>S<sss> chip family, where |
| * bb is the resolution in number of bits (8, 10, 12) |
| * c is the number of channels (1, 2, 4, 8) |
| * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 |
| kSPS and 101 for 1 MSPS) |
| |
| Examples : ADC081S101, ADC124S501, ... |
| |
| This driver can also be built as a module. If so, the module |
| will be called adcxx. |
| |
| config SENSORS_ADM1021 |
| tristate "Analog Devices ADM1021 and compatibles" |
| depends on I2C |
| help |
| If you say yes here you get support for Analog Devices ADM1021 |
| and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, |
| Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, |
| and the XEON processor built-in sensor. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adm1021. |
| |
| config SENSORS_ADM1025 |
| tristate "Analog Devices ADM1025 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for Analog Devices ADM1025 |
| and Philips NE1619 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adm1025. |
| |
| config SENSORS_ADM1026 |
| tristate "Analog Devices ADM1026 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for Analog Devices ADM1026 |
| sensor chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adm1026. |
| |
| config SENSORS_ADM1029 |
| tristate "Analog Devices ADM1029" |
| depends on I2C |
| help |
| If you say yes here you get support for Analog Devices ADM1029 |
| sensor chip. |
| Very rare chip, please let us know you use it. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adm1029. |
| |
| config SENSORS_ADM1031 |
| tristate "Analog Devices ADM1031 and compatibles" |
| depends on I2C |
| help |
| If you say yes here you get support for Analog Devices ADM1031 |
| and ADM1030 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adm1031. |
| |
| config SENSORS_ADM9240 |
| tristate "Analog Devices ADM9240 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for Analog Devices ADM9240, |
| Dallas DS1780, National Semiconductor LM81 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adm9240. |
| |
| config SENSORS_ADT7411 |
| tristate "Analog Devices ADT7411" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Analog Devices |
| ADT7411 voltage and temperature monitoring chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adt7411. |
| |
| config SENSORS_ADT7462 |
| tristate "Analog Devices ADT7462" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Analog Devices |
| ADT7462 temperature monitoring chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adt7462. |
| |
| config SENSORS_ADT7470 |
| tristate "Analog Devices ADT7470" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Analog Devices |
| ADT7470 temperature monitoring chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adt7470. |
| |
| config SENSORS_ADT7475 |
| tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for the Analog Devices |
| ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring |
| chips. |
| |
| This driver can also be build as a module. If so, the module |
| will be called adt7475. |
| |
| config SENSORS_ASC7621 |
| tristate "Andigilog aSC7621" |
| depends on HWMON && I2C |
| help |
| If you say yes here you get support for the aSC7621 |
| family of SMBus sensors chip found on most Intel X38, X48, X58, |
| 945, 965 and 975 desktop boards. Currently supported chips: |
| aSC7621 |
| aSC7621a |
| |
| This driver can also be built as a module. If so, the module |
| will be called asc7621. |
| |
| config SENSORS_K8TEMP |
| tristate "AMD Athlon64/FX or Opteron temperature sensor" |
| depends on X86 && PCI && EXPERIMENTAL |
| help |
| If you say yes here you get support for the temperature |
| sensor(s) inside your CPU. Supported is whole AMD K8 |
| microarchitecture. Please note that you will need at least |
| lm-sensors 2.10.1 for proper userspace support. |
| |
| This driver can also be built as a module. If so, the module |
| will be called k8temp. |
| |
| config SENSORS_K10TEMP |
| tristate "AMD Family 10h/11h/12h/14h temperature sensor" |
| depends on X86 && PCI |
| help |
| If you say yes here you get support for the temperature |
| sensor(s) inside your CPU. Supported are later revisions of |
| the AMD Family 10h and all revisions of the AMD Family 11h, |
| 12h (Llano), and 14h (Brazos) microarchitectures. |
| |
| This driver can also be built as a module. If so, the module |
| will be called k10temp. |
| |
| config SENSORS_ASB100 |
| tristate "Asus ASB100 Bach" |
| depends on X86 && I2C && EXPERIMENTAL |
| select HWMON_VID |
| help |
| If you say yes here you get support for the ASB100 Bach sensor |
| chip found on some Asus mainboards. |
| |
| This driver can also be built as a module. If so, the module |
| will be called asb100. |
| |
| config SENSORS_ATXP1 |
| tristate "Attansic ATXP1 VID controller" |
| depends on I2C && EXPERIMENTAL |
| select HWMON_VID |
| help |
| If you say yes here you get support for the Attansic ATXP1 VID |
| controller. |
| |
| If your board have such a chip, you are able to control your CPU |
| core and other voltages. |
| |
| This driver can also be built as a module. If so, the module |
| will be called atxp1. |
| |
| config SENSORS_DS620 |
| tristate "Dallas Semiconductor DS620" |
| depends on I2C |
| help |
| If you say yes here you get support for Dallas Semiconductor |
| DS620 sensor chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ds620. |
| |
| config SENSORS_DS1621 |
| tristate "Dallas Semiconductor DS1621 and DS1625" |
| depends on I2C |
| help |
| If you say yes here you get support for Dallas Semiconductor |
| DS1621 and DS1625 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ds1621. |
| |
| config SENSORS_I5K_AMB |
| tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" |
| depends on PCI && EXPERIMENTAL |
| help |
| If you say yes here you get support for FB-DIMM AMB temperature |
| monitoring chips on systems with the Intel 5000 series chipset. |
| |
| This driver can also be built as a module. If so, the module |
| will be called i5k_amb. |
| |
| config SENSORS_F71805F |
| tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" |
| help |
| If you say yes here you get support for hardware monitoring |
| features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG |
| Super-I/O chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called f71805f. |
| |
| config SENSORS_F71882FG |
| tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" |
| help |
| If you say yes here you get support for hardware monitoring |
| features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, |
| F71889FG and F8000 Super-I/O chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called f71882fg. |
| |
| config SENSORS_F75375S |
| tristate "Fintek F75375S/SP and F75373" |
| depends on I2C |
| help |
| If you say yes here you get support for hardware monitoring |
| features of the Fintek F75375S/SP and F75373 |
| |
| This driver can also be built as a module. If so, the module |
| will be called f75375s. |
| |
| config SENSORS_FSCHMD |
| tristate "Fujitsu Siemens Computers sensor chips" |
| depends on X86 && I2C |
| help |
| If you say yes here you get support for the following Fujitsu |
| Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, |
| Heimdall, Heracles, Hades and Syleus including support for the |
| integrated watchdog. |
| |
| This is a merged driver for FSC sensor chips replacing the fscpos, |
| fscscy and fscher drivers and adding support for several other FSC |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called fschmd. |
| |
| config SENSORS_G760A |
| tristate "GMT G760A" |
| depends on I2C |
| help |
| If you say yes here you get support for Global Mixed-mode |
| Technology Inc G760A fan speed PWM controller chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called g760a. |
| |
| config SENSORS_GL518SM |
| tristate "Genesys Logic GL518SM" |
| depends on I2C |
| help |
| If you say yes here you get support for Genesys Logic GL518SM |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called gl518sm. |
| |
| config SENSORS_GL520SM |
| tristate "Genesys Logic GL520SM" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for Genesys Logic GL520SM |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called gl520sm. |
| |
| config SENSORS_GPIO_FAN |
| tristate "GPIO fan" |
| depends on GENERIC_GPIO |
| help |
| If you say yes here you get support for fans connected to GPIO lines. |
| |
| This driver can also be built as a module. If so, the module |
| will be called gpio-fan. |
| |
| config SENSORS_CORETEMP |
| tristate "Intel Core/Core2/Atom temperature sensor" |
| depends on X86 && PCI && EXPERIMENTAL |
| help |
| If you say yes here you get support for the temperature |
| sensor inside your CPU. Most of the family 6 CPUs |
| are supported. Check Documentation/hwmon/coretemp for details. |
| |
| config SENSORS_PKGTEMP |
| tristate "Intel processor package temperature sensor" |
| depends on X86 && EXPERIMENTAL |
| help |
| If you say yes here you get support for the package level temperature |
| sensor inside your CPU. Check documentation/driver for details. |
| |
| config SENSORS_IBMAEM |
| tristate "IBM Active Energy Manager temperature/power sensors and control" |
| select IPMI_SI |
| depends on IPMI_HANDLER |
| help |
| If you say yes here you get support for the temperature and |
| power sensors and capping hardware in various IBM System X |
| servers that support Active Energy Manager. This includes |
| the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, |
| and certain HC10/HS2x/LS2x/QS2x blades. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ibmaem. |
| |
| config SENSORS_IBMPEX |
| tristate "IBM PowerExecutive temperature/power sensors" |
| select IPMI_SI |
| depends on IPMI_HANDLER |
| help |
| If you say yes here you get support for the temperature and |
| power sensors in various IBM System X servers that support |
| PowerExecutive. So far this includes the x3350, x3550, x3650, |
| x3655, and x3755; the x3800, x3850, and x3950 models that have |
| PCI Express; and some of the HS2x, LS2x, and QS2x blades. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ibmpex. |
| |
| config SENSORS_IT87 |
| tristate "ITE IT87xx and compatibles" |
| select HWMON_VID |
| help |
| If you say yes here you get support for ITE IT8705F, IT8712F, |
| IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor |
| chips, and the SiS960 clone. |
| |
| This driver can also be built as a module. If so, the module |
| will be called it87. |
| |
| config SENSORS_JZ4740 |
| tristate "Ingenic JZ4740 SoC ADC driver" |
| depends on MACH_JZ4740 && MFD_JZ4740_ADC |
| help |
| If you say yes here you get support for reading adc values from the ADCIN |
| pin on Ingenic JZ4740 SoC based boards. |
| |
| This driver can also be build as a module. If so, the module will be |
| called jz4740-hwmon. |
| |
| config SENSORS_JC42 |
| tristate "JEDEC JC42.4 compliant memory module temperature sensors" |
| depends on I2C |
| help |
| If you say yes here, you get support for JEDEC JC42.4 compliant |
| temperature sensors, which are used on many DDR3 memory modules for |
| mobile devices and servers. Support will include, but not be limited |
| to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, |
| MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. |
| |
| This driver can also be built as a module. If so, the module |
| will be called jc42. |
| |
| config SENSORS_LINEAGE |
| tristate "Lineage Compact Power Line Power Entry Module" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Lineage Compact Power Line |
| series of DC/DC and AC/DC converters such as CP1800, CP2000AC, |
| CP2000DC, CP2725, and others. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lineage-pem. |
| |
| config SENSORS_LM63 |
| tristate "National Semiconductor LM63 and LM64" |
| depends on I2C |
| help |
| If you say yes here you get support for the National |
| Semiconductor LM63 and LM64 remote diode digital temperature |
| sensors with integrated fan control. Such chips are found |
| on the Tyan S4882 (Thunder K8QS Pro) motherboard, among |
| others. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm63. |
| |
| config SENSORS_LM70 |
| tristate "National Semiconductor LM70 / Texas Instruments TMP121" |
| depends on SPI_MASTER |
| help |
| If you say yes here you get support for the National Semiconductor |
| LM70 and Texas Instruments TMP121/TMP123 digital temperature |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm70. |
| |
| config SENSORS_LM73 |
| tristate "National Semiconductor LM73" |
| depends on I2C |
| help |
| If you say yes here you get support for National Semiconductor LM73 |
| sensor chips. |
| This driver can also be built as a module. If so, the module |
| will be called lm73. |
| |
| config SENSORS_LM75 |
| tristate "National Semiconductor LM75 and compatibles" |
| depends on I2C |
| help |
| If you say yes here you get support for one common type of |
| temperature sensor chip, with models including: |
| |
| - Dallas Semiconductor DS75 and DS1775 |
| - Maxim MAX6625 and MAX6626 |
| - Microchip MCP980x |
| - National Semiconductor LM75 |
| - NXP's LM75A |
| - ST Microelectronics STDS75 |
| - TelCom (now Microchip) TCN75 |
| - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, |
| TMP275 |
| |
| This driver supports driver model based binding through board |
| specific I2C device tables. |
| |
| It also supports the "legacy" style of driver binding. To use |
| that with some chips which don't replicate LM75 quirks exactly, |
| you may need the "force" module parameter. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm75. |
| |
| config SENSORS_LM77 |
| tristate "National Semiconductor LM77" |
| depends on I2C |
| help |
| If you say yes here you get support for National Semiconductor LM77 |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm77. |
| |
| config SENSORS_LM78 |
| tristate "National Semiconductor LM78 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for National Semiconductor LM78, |
| LM78-J and LM79. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm78. |
| |
| config SENSORS_LM80 |
| tristate "National Semiconductor LM80" |
| depends on I2C |
| help |
| If you say yes here you get support for National Semiconductor |
| LM80 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm80. |
| |
| config SENSORS_LM83 |
| tristate "National Semiconductor LM83 and compatibles" |
| depends on I2C |
| help |
| If you say yes here you get support for National Semiconductor |
| LM82 and LM83 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm83. |
| |
| config SENSORS_LM85 |
| tristate "National Semiconductor LM85 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for National Semiconductor LM85 |
| sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, |
| EMC6D101, EMC6D102, and EMC6D103. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm85. |
| |
| config SENSORS_LM87 |
| tristate "National Semiconductor LM87 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for National Semiconductor LM87 |
| and Analog Devices ADM1024 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm87. |
| |
| config SENSORS_LM90 |
| tristate "National Semiconductor LM90 and compatibles" |
| depends on I2C |
| help |
| If you say yes here you get support for National Semiconductor LM90, |
| LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim |
| MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, |
| MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton |
| W83L771W/G/AWG/ASG sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm90. |
| |
| config SENSORS_LM92 |
| tristate "National Semiconductor LM92 and compatibles" |
| depends on I2C |
| help |
| If you say yes here you get support for National Semiconductor LM92 |
| and Maxim MAX6635 sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm92. |
| |
| config SENSORS_LM93 |
| tristate "National Semiconductor LM93 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for National Semiconductor LM93, |
| LM94, and compatible sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm93. |
| |
| config SENSORS_LTC4215 |
| tristate "Linear Technology LTC4215" |
| depends on I2C && EXPERIMENTAL |
| default n |
| help |
| If you say yes here you get support for Linear Technology LTC4215 |
| Hot Swap Controller I2C interface. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc4215. |
| |
| config SENSORS_LTC4245 |
| tristate "Linear Technology LTC4245" |
| depends on I2C && EXPERIMENTAL |
| default n |
| help |
| If you say yes here you get support for Linear Technology LTC4245 |
| Multiple Supply Hot Swap Controller I2C interface. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc4245. |
| |
| config SENSORS_LTC4261 |
| tristate "Linear Technology LTC4261" |
| depends on I2C && EXPERIMENTAL |
| default n |
| help |
| If you say yes here you get support for Linear Technology LTC4261 |
| Negative Voltage Hot Swap Controller I2C interface. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc4261. |
| |
| config SENSORS_LM95241 |
| tristate "National Semiconductor LM95241 sensor chip" |
| depends on I2C |
| help |
| If you say yes here you get support for LM95241 sensor chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called lm95241. |
| |
| config SENSORS_MAX1111 |
| tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" |
| depends on SPI_MASTER |
| help |
| Say y here to support Maxim's MAX1111 ADC chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called max1111. |
| |
| config SENSORS_MAX1619 |
| tristate "Maxim MAX1619 sensor chip" |
| depends on I2C |
| help |
| If you say yes here you get support for MAX1619 sensor chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called max1619. |
| |
| config SENSORS_MAX6639 |
| tristate "Maxim MAX6639 sensor chip" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the MAX6639 |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called max6639. |
| |
| config SENSORS_MAX6650 |
| tristate "Maxim MAX6650 sensor chip" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the MAX6650 / MAX6651 |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called max6650. |
| |
| config SENSORS_PC87360 |
| tristate "National Semiconductor PC87360 family" |
| select HWMON_VID |
| help |
| If you say yes here you get access to the hardware monitoring |
| functions of the National Semiconductor PC8736x Super-I/O chips. |
| The PC87360, PC87363 and PC87364 only have fan monitoring and |
| control. The PC87365 and PC87366 additionally have voltage and |
| temperature monitoring. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pc87360. |
| |
| config SENSORS_PC87427 |
| tristate "National Semiconductor PC87427" |
| help |
| If you say yes here you get access to the hardware monitoring |
| functions of the National Semiconductor PC87427 Super-I/O chip. |
| The chip has two distinct logical devices, one for fan speed |
| monitoring and control, and one for voltage and temperature |
| monitoring. Fan speed monitoring and control are supported, as |
| well as temperature monitoring. Voltages aren't supported yet. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pc87427. |
| |
| config SENSORS_PCF8591 |
| tristate "Philips PCF8591 ADC/DAC" |
| depends on I2C |
| default n |
| help |
| If you say yes here you get support for Philips PCF8591 4-channel |
| ADC, 1-channel DAC chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called pcf8591. |
| |
| These devices are hard to detect and rarely found on mainstream |
| hardware. If unsure, say N. |
| |
| config PMBUS |
| tristate "PMBus support" |
| depends on I2C && EXPERIMENTAL |
| default n |
| help |
| Say yes here if you want to enable PMBus support. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pmbus_core. |
| |
| if PMBUS |
| |
| config SENSORS_PMBUS |
| tristate "Generic PMBus devices" |
| default n |
| help |
| If you say yes here you get hardware monitoring support for generic |
| PMBus devices, including but not limited to BMR450, BMR451, BMR453, |
| BMR454, and LTC2978. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pmbus. |
| |
| config SENSORS_MAX16064 |
| tristate "Maxim MAX16064" |
| default n |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX16064. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max16064. |
| |
| config SENSORS_MAX8688 |
| tristate "Maxim MAX8688" |
| default n |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX8688. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max8688. |
| |
| endif # PMBUS |
| |
| config SENSORS_SHT15 |
| tristate "Sensiron humidity and temperature sensors. SHT15 and compat." |
| depends on GENERIC_GPIO |
| help |
| If you say yes here you get support for the Sensiron SHT10, SHT11, |
| SHT15, SHT71, SHT75 humidity and temperature sensors. |
| |
| This driver can also be built as a module. If so, the module |
| will be called sht15. |
| |
| config SENSORS_SHT21 |
| tristate "Sensiron humidity and temperature sensors. SHT21 and compat." |
| depends on I2C |
| help |
| If you say yes here you get support for the Sensiron SHT21, SHT25 |
| humidity and temperature sensors. |
| |
| This driver can also be built as a module. If so, the module |
| will be called sht21. |
| |
| config SENSORS_S3C |
| tristate "Samsung built-in ADC" |
| depends on S3C_ADC |
| help |
| If you say yes here you get support for the on-board ADCs of |
| the Samsung S3C24XX, S3C64XX and other series of SoC |
| |
| This driver can also be built as a module. If so, the module |
| will be called s3c-hwmon. |
| |
| config SENSORS_S3C_RAW |
| bool "Include raw channel attributes in sysfs" |
| depends on SENSORS_S3C |
| help |
| Say Y here if you want to include raw copies of all the ADC |
| channels in sysfs. |
| |
| config SENSORS_SIS5595 |
| tristate "Silicon Integrated Systems Corp. SiS5595" |
| depends on PCI |
| help |
| If you say yes here you get support for the integrated sensors in |
| SiS5595 South Bridges. |
| |
| This driver can also be built as a module. If so, the module |
| will be called sis5595. |
| |
| config SENSORS_SMM665 |
| tristate "Summit Microelectronics SMM665" |
| depends on I2C && EXPERIMENTAL |
| default n |
| help |
| If you say yes here you get support for the hardware monitoring |
| features of the Summit Microelectronics SMM665/SMM665B Six-Channel |
| Active DC Output Controller / Monitor. |
| |
| Other supported chips are SMM465, SMM665C, SMM764, and SMM766. |
| Support for those chips is untested. |
| |
| This driver can also be built as a module. If so, the module will |
| be called smm665. |
| |
| config SENSORS_DME1737 |
| tristate "SMSC DME1737, SCH311x and compatibles" |
| depends on I2C && EXPERIMENTAL |
| select HWMON_VID |
| help |
| If you say yes here you get support for the hardware monitoring |
| and fan control features of the SMSC DME1737, SCH311x, SCH5027, and |
| Asus A8000 Super-I/O chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called dme1737. |
| |
| config SENSORS_EMC1403 |
| tristate "SMSC EMC1403/23 thermal sensor" |
| depends on I2C |
| help |
| If you say yes here you get support for the SMSC EMC1403/23 |
| temperature monitoring chip. |
| |
| Threshold values can be configured using sysfs. |
| Data from the different diodes are accessible via sysfs. |
| |
| config SENSORS_EMC2103 |
| tristate "SMSC EMC2103" |
| depends on I2C |
| help |
| If you say yes here you get support for the temperature |
| and fan sensors of the SMSC EMC2103 chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called emc2103. |
| |
| config SENSORS_SMSC47M1 |
| tristate "SMSC LPC47M10x and compatibles" |
| help |
| If you say yes here you get support for the integrated fan |
| monitoring and control capabilities of the SMSC LPC47B27x, |
| LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, |
| LPC47M192, LPC47M292 and LPC47M997 chips. |
| |
| The temperature and voltage sensor features of the LPC47M15x, |
| LPC47M192, LPC47M292 and LPC47M997 are supported by another |
| driver, select also "SMSC LPC47M192 and compatibles" below for |
| those. |
| |
| This driver can also be built as a module. If so, the module |
| will be called smsc47m1. |
| |
| config SENSORS_SMSC47M192 |
| tristate "SMSC LPC47M192 and compatibles" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for the temperature and |
| voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 |
| and LPC47M997 chips. |
| |
| The fan monitoring and control capabilities of these chips |
| are supported by another driver, select |
| "SMSC LPC47M10x and compatibles" above. You need both drivers |
| if you want fan control and voltage/temperature sensor support. |
| |
| This driver can also be built as a module. If so, the module |
| will be called smsc47m192. |
| |
| config SENSORS_SMSC47B397 |
| tristate "SMSC LPC47B397-NC" |
| depends on EXPERIMENTAL |
| help |
| If you say yes here you get support for the SMSC LPC47B397-NC |
| sensor chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called smsc47b397. |
| |
| config SENSORS_ADS7828 |
| tristate "Texas Instruments ADS7828" |
| depends on I2C |
| help |
| If you say yes here you get support for Texas Instruments ADS7828 |
| 12-bit 8-channel ADC device. |
| |
| This driver can also be built as a module. If so, the module |
| will be called ads7828. |
| |
| config SENSORS_ADS7871 |
| tristate "Texas Instruments ADS7871 A/D converter" |
| depends on SPI |
| help |
| If you say yes here you get support for TI ADS7871 & ADS7870 |
| |
| This driver can also be built as a module. If so, the module |
| will be called ads7871. |
| |
| config SENSORS_AMC6821 |
| tristate "Texas Instruments AMC6821" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Texas Instruments |
| AMC6821 hardware monitoring chips. |
| |
| This driver can also be build as a module. If so, the module |
| will be called amc6821. |
| |
| config SENSORS_THMC50 |
| tristate "Texas Instruments THMC50 / Analog Devices ADM1022" |
| depends on I2C |
| help |
| If you say yes here you get support for Texas Instruments THMC50 |
| sensor chips and clones: the Analog Devices ADM1022. |
| |
| This driver can also be built as a module. If so, the module |
| will be called thmc50. |
| |
| config SENSORS_TMP102 |
| tristate "Texas Instruments TMP102" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for Texas Instruments TMP102 |
| sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tmp102. |
| |
| config SENSORS_TMP401 |
| tristate "Texas Instruments TMP401 and compatibles" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for Texas Instruments TMP401 and |
| TMP411 temperature sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tmp401. |
| |
| config SENSORS_TMP421 |
| tristate "Texas Instruments TMP421 and compatible" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for Texas Instruments TMP421, |
| TMP422 and TMP423 temperature sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called tmp421. |
| |
| config SENSORS_VIA_CPUTEMP |
| tristate "VIA CPU temperature sensor" |
| depends on X86 |
| help |
| If you say yes here you get support for the temperature |
| sensor inside your CPU. Supported are all known variants of |
| the VIA C7 and Nano. |
| |
| config SENSORS_VIA686A |
| tristate "VIA686A" |
| depends on PCI |
| help |
| If you say yes here you get support for the integrated sensors in |
| Via 686A/B South Bridges. |
| |
| This driver can also be built as a module. If so, the module |
| will be called via686a. |
| |
| config SENSORS_VT1211 |
| tristate "VIA VT1211" |
| select HWMON_VID |
| help |
| If you say yes here then you get support for hardware monitoring |
| features of the VIA VT1211 Super-I/O chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called vt1211. |
| |
| config SENSORS_VT8231 |
| tristate "VIA VT8231" |
| depends on PCI |
| select HWMON_VID |
| help |
| If you say yes here then you get support for the integrated sensors |
| in the VIA VT8231 device. |
| |
| This driver can also be built as a module. If so, the module |
| will be called vt8231. |
| |
| config SENSORS_W83781D |
| tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for the Winbond W8378x series |
| of sensor chips: the W83781D, W83782D and W83783S, and the similar |
| Asus AS99127F. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83781d. |
| |
| config SENSORS_W83791D |
| tristate "Winbond W83791D" |
| depends on I2C |
| select HWMON_VID |
| help |
| If you say yes here you get support for the Winbond W83791D chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83791d. |
| |
| config SENSORS_W83792D |
| tristate "Winbond W83792D" |
| depends on I2C |
| help |
| If you say yes here you get support for the Winbond W83792D chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83792d. |
| |
| config SENSORS_W83793 |
| tristate "Winbond W83793" |
| depends on I2C && EXPERIMENTAL |
| select HWMON_VID |
| help |
| If you say yes here you get support for the Winbond W83793 |
| hardware monitoring chip, including support for the integrated |
| watchdog. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83793. |
| |
| config SENSORS_W83795 |
| tristate "Winbond/Nuvoton W83795G/ADG" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Winbond W83795G and |
| W83795ADG hardware monitoring chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83795. |
| |
| config SENSORS_W83795_FANCTRL |
| boolean "Include fan control support (DANGEROUS)" |
| depends on SENSORS_W83795 && EXPERIMENTAL |
| default n |
| help |
| If you say yes here, support for the both manual and automatic |
| fan control features will be included in the driver. |
| |
| This part of the code wasn't carefully reviewed and tested yet, |
| so enabling this option is strongly discouraged on production |
| servers. Only developers and testers should enable it for the |
| time being. |
| |
| Please also note that this option will create sysfs attribute |
| files which may change in the future, so you shouldn't rely |
| on them being stable. |
| |
| config SENSORS_W83L785TS |
| tristate "Winbond W83L785TS-S" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Winbond W83L785TS-S |
| sensor chip, which is used on the Asus A7N8X, among other |
| motherboards. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83l785ts. |
| |
| config SENSORS_W83L786NG |
| tristate "Winbond W83L786NG, W83L786NR" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for the Winbond W83L786NG |
| and W83L786NR sensor chips. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83l786ng. |
| |
| config SENSORS_W83627HF |
| tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" |
| select HWMON_VID |
| help |
| If you say yes here you get support for the Winbond W836X7 series |
| of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and |
| W83697HF. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83627hf. |
| |
| config SENSORS_W83627EHF |
| tristate "Winbond W83627EHF/EHG/DHG, W83667HG" |
| select HWMON_VID |
| help |
| If you say yes here you get support for the hardware |
| monitoring functionality of the Winbond W83627EHF Super-I/O chip. |
| |
| This driver also supports the W83627EHG, which is the lead-free |
| version of the W83627EHF, and the W83627DHG, which is a similar |
| chip suited for specific Intel processors that use PECI such as |
| the Core 2 Duo. |
| |
| This driver also supports the W83667HG chip. |
| |
| This driver can also be built as a module. If so, the module |
| will be called w83627ehf. |
| |
| config SENSORS_WM831X |
| tristate "WM831x PMICs" |
| depends on MFD_WM831X |
| help |
| If you say yes here you get support for the hardware |
| monitoring functionality of the Wolfson Microelectronics |
| WM831x series of PMICs. |
| |
| This driver can also be built as a module. If so, the module |
| will be called wm831x-hwmon. |
| |
| config SENSORS_WM8350 |
| tristate "Wolfson Microelectronics WM835x" |
| depends on MFD_WM8350 |
| help |
| If you say yes here you get support for the hardware |
| monitoring features of the WM835x series of PMICs. |
| |
| This driver can also be built as a module. If so, the module |
| will be called wm8350-hwmon. |
| |
| config SENSORS_ULTRA45 |
| tristate "Sun Ultra45 PIC16F747" |
| depends on SPARC64 |
| help |
| This driver provides support for the Ultra45 workstation environmental |
| sensors. |
| |
| config SENSORS_LIS3_SPI |
| tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" |
| depends on !ACPI && SPI_MASTER && INPUT |
| select INPUT_POLLDEV |
| default n |
| help |
| This driver provides support for the LIS3LV02Dx accelerometer connected |
| via SPI. The accelerometer data is readable via |
| /sys/devices/platform/lis3lv02d. |
| |
| This driver also provides an absolute input class device, allowing |
| the laptop to act as a pinball machine-esque joystick. |
| |
| This driver can also be built as modules. If so, the core module |
| will be called lis3lv02d and a specific module for the SPI transport |
| is called lis3lv02d_spi. |
| |
| config SENSORS_LIS3_I2C |
| tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" |
| depends on I2C && INPUT |
| select INPUT_POLLDEV |
| default n |
| help |
| This driver provides support for the LIS3LV02Dx accelerometer connected |
| via I2C. The accelerometer data is readable via |
| /sys/devices/platform/lis3lv02d. |
| |
| This driver also provides an absolute input class device, allowing |
| the device to act as a pinball machine-esque joystick. |
| |
| This driver can also be built as modules. If so, the core module |
| will be called lis3lv02d and a specific module for the I2C transport |
| is called lis3lv02d_i2c. |
| |
| config SENSORS_APPLESMC |
| tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" |
| depends on INPUT && X86 |
| select NEW_LEDS |
| select LEDS_CLASS |
| select INPUT_POLLDEV |
| default n |
| help |
| This driver provides support for the Apple System Management |
| Controller, which provides an accelerometer (Apple Sudden Motion |
| Sensor), light sensors, temperature sensors, keyboard backlight |
| control and fan control. |
| |
| Only Intel-based Apple's computers are supported (MacBook Pro, |
| MacBook, MacMini). |
| |
| Data from the different sensors, keyboard backlight control and fan |
| control are accessible via sysfs. |
| |
| This driver also provides an absolute input class device, allowing |
| the laptop to act as a pinball machine-esque joystick. |
| |
| Say Y here if you have an applicable laptop and want to experience |
| the awesome power of applesmc. |
| |
| config SENSORS_MC13783_ADC |
| tristate "Freescale MC13783 ADC" |
| depends on MFD_MC13783 |
| help |
| Support for the A/D converter on MC13783 PMIC. |
| |
| if ACPI |
| |
| comment "ACPI drivers" |
| |
| config SENSORS_ATK0110 |
| tristate "ASUS ATK0110" |
| depends on X86 && EXPERIMENTAL |
| help |
| If you say yes here you get support for the ACPI hardware |
| monitoring interface found in many ASUS motherboards. This |
| driver will provide readings of fans, voltages and temperatures |
| through the system firmware. |
| |
| This driver can also be built as a module. If so, the module |
| will be called asus_atk0110. |
| |
| config SENSORS_LIS3LV02D |
| tristate "STMicroeletronics LIS3* three-axis digital accelerometer" |
| depends on INPUT |
| select INPUT_POLLDEV |
| select NEW_LEDS |
| select LEDS_CLASS |
| default n |
| help |
| This driver provides support for the LIS3* accelerometers, such as the |
| LIS3LV02DL or the LIS331DL. In particular, it can be found in a number |
| of HP laptops, which have the "Mobile Data Protection System 3D" or |
| "3D DriveGuard" feature. On such systems the driver should load |
| automatically (via ACPI alias). The accelerometer might also be found |
| in other systems, connected via SPI or I2C. The accelerometer data is |
| readable via /sys/devices/platform/lis3lv02d. |
| |
| This driver also provides an absolute input class device, allowing |
| a laptop to act as a pinball machine-esque joystick. It provides also |
| a misc device which can be used to detect free-fall. On HP laptops, |
| if the led infrastructure is activated, support for a led indicating |
| disk protection will be provided as hp::hddprotect. For more |
| information on the feature, refer to Documentation/hwmon/lis3lv02d. |
| |
| This driver can also be built as modules. If so, the core module |
| will be called lis3lv02d and a specific module for HP laptops will be |
| called hp_accel. |
| |
| Say Y here if you have an applicable laptop and want to experience |
| the awesome power of lis3lv02d. |
| |
| endif # ACPI |
| |
| endif # HWMON |