[PATCH] mipsnet: Virtual ethernet driver for MIPSsim.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1
drivers/net/mipsnet.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/mipsnet.h | 127 +++++++++++++++++
4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h
new file mode 100644
index 0000000..8785359
--- /dev/null
+++ b/drivers/net/mipsnet.h
@@ -0,0 +1,127 @@
+//
+// <COPYRIGHT CLASS="1B" YEAR="2005">
+// Unpublished work (c) MIPS Technologies, Inc. All rights reserved.
+// Unpublished rights reserved under the copyright laws of the U.S.A. and
+// other countries.
+//
+// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC.
+// FOR INTERNAL USE ONLY.
+//
+// Under no circumstances (contract or otherwise) may this information be
+// disclosed to, or copied, modified or used by anyone other than employees
+// or contractors of MIPS Technologies having a need to know.
+// </COPYRIGHT>
+//
+//++
+// File: MIPS_Net.h
+//
+// Description:
+// The definition of the emulated MIPSNET device's interface.
+//
+// Notes: This include file needs to work from a Linux device drivers.
+//
+//--
+//
+
+#ifndef __MIPSNET_H
+#define __MIPSNET_H
+
+/*
+ * Id of this Net device, as seen by the core.
+ */
+#define MIPS_NET_DEV_ID ((uint64_t) \
+ ((uint64_t)'M'<< 0)| \
+ ((uint64_t)'I'<< 8)| \
+ ((uint64_t)'P'<<16)| \
+ ((uint64_t)'S'<<24)| \
+ ((uint64_t)'N'<<32)| \
+ ((uint64_t)'E'<<40)| \
+ ((uint64_t)'T'<<48)| \
+ ((uint64_t)'0'<<56))
+
+/*
+ * Net status/control block as seen by sw in the core.
+ * (Why not use bit fields? can't be bothered with cross-platform struct
+ * packing.)
+ */
+typedef struct _net_control_block {
+ /// dev info for probing
+ /// reads as MIPSNET%d where %d is some form of version
+ uint64_t devId; /*0x00 */
+
+ /*
+ * read only busy flag.
+ * Set and cleared by the Net Device to indicate that an rx or a tx
+ * is in progress.
+ */
+ uint32_t busy; /*0x08 */
+
+ /*
+ * Set by the Net Device.
+ * The device will set it once data has been received.
+ * The value is the number of bytes that should be read from
+ * rxDataBuffer. The value will decrease till 0 until all the data
+ * from rxDataBuffer has been read.
+ */
+ uint32_t rxDataCount; /*0x0c */
+#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
+
+ /*
+ * Settable from the MIPS core, cleared by the Net Device.
+ * The core should set the number of bytes it wants to send,
+ * then it should write those bytes of data to txDataBuffer.
+ * The device will clear txDataCount has been processed (not necessarily sent).
+ */
+ uint32_t txDataCount; /*0x10 */
+
+ /*
+ * Interrupt control
+ *
+ * Used to clear the interrupted generated by this dev.
+ * Write a 1 to clear the interrupt. (except bit31).
+ *
+ * Bit0 is set if it was a tx-done interrupt.
+ * Bit1 is set when new rx-data is available.
+ * Until this bit is cleared there will be no other RXs.
+ *
+ * Bit31 is used for testing, it clears after a read.
+ * Writing 1 to this bit will cause an interrupt to be generated.
+ * To clear the test interrupt, write 0 to this register.
+ */
+ uint32_t interruptControl; /*0x14 */
+#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0))
+#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1))
+#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31))
+#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT)
+
+ /*
+ * Readonly core-specific interrupt info for the device to signal the core.
+ * The meaning of the contents of this field might change.
+ */
+ /*###\todo: the whole memIntf interrupt scheme is messy: the device should have
+ * no control what so ever of what VPE/register set is being used.
+ * The MemIntf should only expose interrupt lines, and something in the
+ * config should be responsible for the line<->core/vpe bindings.
+ */
+ uint32_t interruptInfo; /*0x18 */
+
+ /*
+ * This is where the received data is read out.
+ * There is more data to read until rxDataReady is 0.
+ * Only 1 byte at this regs offset is used.
+ */
+ uint32_t rxDataBuffer; /*0x1c */
+
+ /*
+ * This is where the data to transmit is written.
+ * Data should be written for the amount specified in the txDataCount register.
+ * Only 1 byte at this regs offset is used.
+ */
+ uint32_t txDataBuffer; /*0x20 */
+} MIPS_T_NetControl;
+
+#define MIPSNET_IO_EXTENT 0x40 /* being generous */
+
+#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field)
+
+#endif /* __MIPSNET_H */