pata_scc.c: small fixes (Workaround for errata A308)
This patch fixes some issues of the previous patch:
- Use mode_filter() hook to limit ATAPI UDMA mode
- "data loss" warning message
- handling of udma_mask
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index c55667e..c0ffbed 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -238,12 +238,6 @@
else
offset = 0; /* 100MHz */
- /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
- if (adev->class == ATA_DEV_ATAPI && speed > XFER_UDMA_4) {
- printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
- speed = XFER_UDMA_4;
- }
-
if (speed >= XFER_UDMA_0)
idx = speed - XFER_UDMA_0;
else
@@ -264,6 +258,17 @@
JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
}
+unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
+ if (adev->class == ATA_DEV_ATAPI &&
+ (mask & (0xE0 << ATA_SHIFT_UDMA))) {
+ printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
+ }
+ return ata_pci_default_filter(adev, mask);
+}
+
/**
* scc_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
@@ -741,7 +746,7 @@
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if (ata_altstatus(ap) & ATA_ERR && int_status & INTSTS_INTRQ)
+ if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
@@ -752,11 +757,11 @@
if ((qc->tf.protocol == ATA_PROT_DMA &&
qc->dev->xfer_mode > XFER_UDMA_4)) {
if (!(int_status & INTSTS_ACTEINT)) {
- printk(KERN_WARNING "ata%u: data lost occurred. (ACTEINT==0, retry:%d)\n",
- ap->print_id, retry);
+ printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
+ ap->print_id);
host_stat |= ATA_DMA_ERR;
if (retry++)
- ap->udma_mask >>= 1;
+ ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
} else
retry = 0;
}
@@ -1016,7 +1021,7 @@
.port_disable = ata_port_disable,
.set_piomode = scc_set_piomode,
.set_dmamode = scc_set_dmamode,
- .mode_filter = ata_pci_default_filter,
+ .mode_filter = scc_mode_filter,
.tf_load = scc_tf_load,
.tf_read = scc_tf_read,