drm/i915: save some time when waiting the eDP timings
The eDP spec defines some points where after you do action A, you have
to wait some time before action B. The thing is that in our driver
action B does not happen exactly after action A, but we still use
msleep() calls directly. What this patch does is that we record the
timestamp of when action A happened, then, just before action B, we
look at how much time has passed and only sleep the remaining amount
needed.
With this change, I am able to save about 5-20ms (out of the total
200ms) of the backlight_off delay and completely skip the 1ms
backlight_on delay. The 600ms vdd_off delay doesn't happen during
normal usage anymore due to a previous patch.
v2: - Rename ironlake_wait_jiffies_delay to intel_wait_until_after and
move it to intel_display.c
- Fix the msleep call: diff is in jiffies
v3: - Use "tmp_jiffies" so we don't need to worry about the value of
"jiffies" advancing while we're doing the math.
v4: - Rename function again.
- Move function to i915_drv.h.
- Store last_power_cycle at edp_panel_off too.
- Use msecs_to_jiffies_timeout, then replace the msleep with an
open-coded version that avoids the extra +1 jiffy.
- Try to add units to every variable name so we don't confuse
jiffies with milliseconds.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ff6f870..9370e88 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2556,4 +2556,33 @@
return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1);
}
+/*
+ * If you need to wait X milliseconds between events A and B, but event B
+ * doesn't happen exactly after event A, you record the timestamp (jiffies) of
+ * when event A happened, then just before event B you call this function and
+ * pass the timestamp as the first argument, and X as the second argument.
+ */
+static inline void
+wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms)
+{
+ unsigned long target_jiffies, tmp_jiffies;
+ unsigned int remaining_ms;
+
+ /*
+ * Don't re-read the value of "jiffies" every time since it may change
+ * behind our back and break the math.
+ */
+ tmp_jiffies = jiffies;
+ target_jiffies = timestamp_jiffies +
+ msecs_to_jiffies_timeout(to_wait_ms);
+
+ if (time_after(target_jiffies, tmp_jiffies)) {
+ remaining_ms = jiffies_to_msecs((long)target_jiffies -
+ (long)tmp_jiffies);
+ while (remaining_ms)
+ remaining_ms =
+ schedule_timeout_uninterruptible(remaining_ms);
+ }
+}
+
#endif
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2a7457b..bcd8310 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1057,9 +1057,26 @@
static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
{
DRM_DEBUG_KMS("Wait for panel power cycle\n");
+
+ /* When we disable the VDD override bit last we have to do the manual
+ * wait. */
+ wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
+ intel_dp->panel_power_cycle_delay);
+
ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
}
+static void ironlake_wait_backlight_on(struct intel_dp *intel_dp)
+{
+ wait_remaining_ms_from_jiffies(intel_dp->last_power_on,
+ intel_dp->backlight_on_delay);
+}
+
+static void ironlake_edp_wait_backlight_off(struct intel_dp *intel_dp)
+{
+ wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off,
+ intel_dp->backlight_off_delay);
+}
/* Read the current pp_control value, unlocking the register if it
* is locked
@@ -1147,7 +1164,7 @@
I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
if ((pp & POWER_TARGET_ON) == 0)
- msleep(intel_dp->panel_power_cycle_delay);
+ intel_dp->last_power_cycle = jiffies;
intel_runtime_pm_put(dev_priv);
}
@@ -1222,6 +1239,7 @@
POSTING_READ(pp_ctrl_reg);
ironlake_wait_panel_on(intel_dp);
+ intel_dp->last_power_on = jiffies;
if (IS_GEN5(dev)) {
pp |= PANEL_POWER_RESET; /* restore panel reset bit */
@@ -1242,6 +1260,8 @@
DRM_DEBUG_KMS("Turn eDP power off\n");
+ ironlake_edp_wait_backlight_off(intel_dp);
+
pp = ironlake_get_pp_control(intel_dp);
/* We need to switch off panel power _and_ force vdd, for otherwise some
* panels get very unhappy and cease to work. */
@@ -1252,6 +1272,7 @@
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
+ intel_dp->last_power_cycle = jiffies;
ironlake_wait_panel_off(intel_dp);
}
@@ -1273,7 +1294,7 @@
* link. So delay a bit to make sure the image is solid before
* allowing it to appear.
*/
- msleep(intel_dp->backlight_on_delay);
+ ironlake_wait_backlight_on(intel_dp);
pp = ironlake_get_pp_control(intel_dp);
pp |= EDP_BLC_ENABLE;
@@ -1305,7 +1326,7 @@
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
- msleep(intel_dp->backlight_off_delay);
+ intel_dp->last_backlight_off = jiffies;
}
static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 02dadef..e69419e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -487,6 +487,9 @@
int backlight_off_delay;
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
+ unsigned long last_power_cycle;
+ unsigned long last_power_on;
+ unsigned long last_backlight_off;
bool psr_setup_done;
struct intel_connector *attached_connector;
};