ALSA: ASoC: Add WM8753 SPI support
Implement SPI support for WM8753, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 8c4df44..83ba419 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -40,6 +40,7 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -1719,6 +1720,63 @@
}
#endif
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8753_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_device *socdev = wm8753_socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ int ret;
+
+ codec->control_data = spi;
+
+ ret = wm8753_init(socdev);
+ if (ret < 0)
+ dev_err(&spi->dev, "failed to initialise WM8753\n");
+
+ return ret;
+}
+
+static int __devexit wm8753_spi_remove(struct spi_device *spi)
+{
+ return 0;
+}
+
+static struct spi_driver wm8753_spi_driver = {
+ .driver = {
+ .name = "wm8753",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8753_spi_probe,
+ .remove = __devexit_p(wm8753_spi_remove),
+};
+
+static int wm8753_spi_write(struct spi_device *spi, const char *data, int len)
+{
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#endif
+
+
static int wm8753_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
@@ -1753,8 +1811,14 @@
codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8753_add_i2c_device(pdev, setup);
}
-#else
- /* Add other interfaces here */
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ if (setup->spi) {
+ codec->hw_write = (hw_write_t)wm8753_spi_write;
+ ret = spi_register_driver(&wm8753_spi_driver);
+ if (ret != 0)
+ printk(KERN_ERR "can't add spi driver");
+ }
#endif
if (ret != 0) {
@@ -1798,6 +1862,9 @@
i2c_unregister_device(codec->control_data);
i2c_del_driver(&wm8753_i2c_driver);
#endif
+#if defined(CONFIG_SPI_MASTER)
+ spi_unregister_driver(&wm8753_spi_driver);
+#endif
kfree(codec->private_data);
kfree(codec);