OMAPDSS: HDMI: Add M2 divider while calculating clkout
While calculating regm and regmf value add using M2 divider in
the equation.
Formula for calculating:
Output clock on digital core domain:
CLKOUT = (M / (N+1))*CLKINP*(1/M2)
Internal oscillator output clock on internal LDO domain:
CLKDCOLDO = (M / (N+1))*CLKINP
The current code when allows variable M2 values as input
ignores using M2 divider values in calculation of regm and regmf.
so fix it by using M2 in calculation although the default value for
M2 is 1.
Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a229d0f..c4b4f69 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -278,24 +278,24 @@
refclk = clkin / pi->regn;
- /*
- * multiplier is pixel_clk/ref_clk
- * Multiplying by 100 to avoid fractional part removal
- */
- pi->regm = (phy * 100 / (refclk)) / 100;
-
if (dssdev->clocks.hdmi.regm2 == 0)
pi->regm2 = HDMI_DEFAULT_REGM2;
else
pi->regm2 = dssdev->clocks.hdmi.regm2;
/*
+ * multiplier is pixel_clk/ref_clk
+ * Multiplying by 100 to avoid fractional part removal
+ */
+ pi->regm = phy * pi->regm2 / refclk;
+
+ /*
* fractional multiplier is remainder of the difference between
* multiplier and actual phy(required pixel clock thus should be
* multiplied by 2^18(262144) divided by the reference clock
*/
- mf = (phy - pi->regm * refclk) * 262144;
- pi->regmf = mf / (refclk);
+ mf = (phy - pi->regm / pi->regm2 * refclk) * 262144;
+ pi->regmf = pi->regm2 * mf / refclk;
/*
* Dcofreq should be set to 1 if required pixel clock