ALSA: ca0106 - Add missing KERN_* prefix to printk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 3aac7e6..dac8a5f 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -412,7 +412,9 @@
}
tmp = reg << 25 | value << 16;
- // snd_printk("I2C-write:reg=0x%x, value=0x%x\n", reg, value);
+ /*
+ snd_printk(KERN_DEBUG "I2C-write:reg=0x%x, value=0x%x\n", reg, value);
+ */
/* Not sure what this I2C channel controls. */
/* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */
@@ -430,7 +432,7 @@
/* Wait till the transaction ends */
while (1) {
status = snd_ca0106_ptr_read(emu, I2C_A, 0);
- //snd_printk("I2C:status=0x%x\n", status);
+ /*snd_printk(KERN_DEBUG "I2C:status=0x%x\n", status);*/
timeout++;
if ((status & I2C_A_ADC_START) == 0)
break;
@@ -529,7 +531,10 @@
channel->number = channel_id;
channel->use = 1;
- //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel);
+ /*
+ printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n",
+ channel_id, chip, channel);
+ */
//channel->interrupt = snd_ca0106_pcm_channel_interrupt;
channel->epcm = epcm;
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
@@ -622,7 +627,10 @@
channel->number = channel_id;
channel->use = 1;
- //printk("open:channel_id=%d, chip=%p, channel=%p\n",channel_id, chip, channel);
+ /*
+ printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n",
+ channel_id, chip, channel);
+ */
//channel->interrupt = snd_ca0106_pcm_channel_interrupt;
channel->epcm = epcm;
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
@@ -713,9 +721,20 @@
u32 reg71;
int i;
- //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1));
- //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base);
- //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->buffer.addr, emu->buffer.area, emu->buffer.bytes);
+#if 0 /* debug */
+ snd_printk(KERN_DEBUG
+ "prepare:channel_number=%d, rate=%d, format=0x%x, "
+ "channels=%d, buffer_size=%ld, period_size=%ld, "
+ "periods=%u, frames_to_bytes=%d\n",
+ channel, runtime->rate, runtime->format,
+ runtime->channels, runtime->buffer_size,
+ runtime->period_size, runtime->periods,
+ frames_to_bytes(runtime, 1));
+ snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n",
+ runtime->dma_addr, runtime->dma_area, table_base);
+ snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",
+ emu->buffer.addr, emu->buffer.area, emu->buffer.bytes);
+#endif /* debug */
/* Rate can be set per channel. */
/* reg40 control host to fifo */
/* reg71 controls DAC rate. */
@@ -807,9 +826,20 @@
u32 reg71_set = 0;
u32 reg71;
- //snd_printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, periods=%u, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, runtime->periods, frames_to_bytes(runtime, 1));
- //snd_printk("dma_addr=%x, dma_area=%p, table_base=%p\n",runtime->dma_addr, runtime->dma_area, table_base);
- //snd_printk("dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",emu->buffer.addr, emu->buffer.area, emu->buffer.bytes);
+#if 0 /* debug */
+ snd_printk(KERN_DEBUG
+ "prepare:channel_number=%d, rate=%d, format=0x%x, "
+ "channels=%d, buffer_size=%ld, period_size=%ld, "
+ "periods=%u, frames_to_bytes=%d\n",
+ channel, runtime->rate, runtime->format,
+ runtime->channels, runtime->buffer_size,
+ runtime->period_size, runtime->periods,
+ frames_to_bytes(runtime, 1));
+ snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n",
+ runtime->dma_addr, runtime->dma_area, table_base);
+ snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",
+ emu->buffer.addr, emu->buffer.area, emu->buffer.bytes);
+#endif /* debug */
/* reg71 controls ADC rate. */
switch (runtime->rate) {
case 44100:
@@ -854,7 +884,14 @@
}
- //printk("prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n",channel, runtime->rate, runtime->format, runtime->channels, runtime->buffer_size, runtime->period_size, frames_to_bytes(runtime, 1));
+ /*
+ printk(KERN_DEBUG
+ "prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, "
+ "buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n",
+ channel, runtime->rate, runtime->format, runtime->channels,
+ runtime->buffer_size, runtime->period_size,
+ frames_to_bytes(runtime, 1));
+ */
snd_ca0106_ptr_write(emu, 0x13, channel, 0);
snd_ca0106_ptr_write(emu, CAPTURE_DMA_ADDR, channel, runtime->dma_addr);
snd_ca0106_ptr_write(emu, CAPTURE_BUFFER_SIZE, channel, frames_to_bytes(runtime, runtime->buffer_size)<<16); // buffer size in bytes
@@ -896,13 +933,13 @@
runtime = s->runtime;
epcm = runtime->private_data;
channel = epcm->channel_id;
- /* snd_printk("channel=%d\n",channel); */
+ /* snd_printk(KERN_DEBUG "channel=%d\n", channel); */
epcm->running = running;
basic |= (0x1 << channel);
extended |= (0x10 << channel);
snd_pcm_trigger_done(s, substream);
}
- /* snd_printk("basic=0x%x, extended=0x%x\n",basic, extended); */
+ /* snd_printk(KERN_DEBUG "basic=0x%x, extended=0x%x\n",basic, extended); */
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -980,8 +1017,13 @@
ptr=ptr2;
if (ptr >= runtime->buffer_size)
ptr -= runtime->buffer_size;
- //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate);
-
+ /*
+ printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, "
+ "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n",
+ ptr1, ptr2, ptr, (int)runtime->buffer_size,
+ (int)runtime->period_size, (int)runtime->frame_bits,
+ (int)runtime->rate);
+ */
return ptr;
}
@@ -1003,8 +1045,13 @@
ptr=ptr2;
if (ptr >= runtime->buffer_size)
ptr -= runtime->buffer_size;
- //printk("ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n", ptr1, ptr2, ptr, (int)runtime->buffer_size, (int)runtime->period_size, (int)runtime->frame_bits, (int)runtime->rate);
-
+ /*
+ printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, "
+ "buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n",
+ ptr1, ptr2, ptr, (int)runtime->buffer_size,
+ (int)runtime->period_size, (int)runtime->frame_bits,
+ (int)runtime->rate);
+ */
return ptr;
}
@@ -1189,8 +1236,12 @@
return IRQ_NONE;
stat76 = snd_ca0106_ptr_read(chip, EXTENDED_INT, 0);
- //snd_printk("interrupt status = 0x%08x, stat76=0x%08x\n", status, stat76);
- //snd_printk("ptr=0x%08x\n",snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0));
+ /*
+ snd_printk(KERN_DEBUG "interrupt status = 0x%08x, stat76=0x%08x\n",
+ status, stat76);
+ snd_printk(KERN_DEBUG "ptr=0x%08x\n",
+ snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0));
+ */
mask = 0x11; /* 0x1 for one half, 0x10 for the other half period. */
for(i = 0; i < 4; i++) {
pchannel = &(chip->playback_channels[i]);
@@ -1478,7 +1529,7 @@
int size, n;
size = ARRAY_SIZE(i2c_adc_init);
- /* snd_printk("I2C:array size=0x%x\n", size); */
+ /* snd_printk(KERN_DEBUG "I2C:array size=0x%x\n", size); */
for (n = 0; n < size; n++)
snd_ca0106_i2c_write(chip, i2c_adc_init[n][0],
i2c_adc_init[n][1]);