rapidio: add default handler for error-stopped state
The default error-stopped state handler provides recovery mechanism as
defined by RIO specification.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 74e9d22..77bd416 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -495,6 +495,148 @@
}
/**
+ * rio_get_input_status - Sends a Link-Request/Input-Status control symbol and
+ * returns link-response (if requested).
+ * @rdev: RIO devive to issue Input-status command
+ * @pnum: Device port number to issue the command
+ * @lnkresp: Response from a link partner
+ */
+static int
+rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval;
+ int checkcount;
+
+ if (lnkresp) {
+ /* Read from link maintenance response register
+ * to clear valid bit */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+ ®val);
+ udelay(50);
+ }
+
+ /* Issue Input-status command */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum),
+ RIO_MNT_REQ_CMD_IS);
+
+ /* Exit if the response is not expected */
+ if (lnkresp == NULL)
+ return 0;
+
+ checkcount = 3;
+ while (checkcount--) {
+ udelay(50);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+ ®val);
+ if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
+ *lnkresp = regval;
+ return 0;
+ }
+ }
+
+ return -EIO;
+}
+
+/**
+ * rio_clr_err_stopped - Clears port Error-stopped states.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to clear errors
+ * @err_status: port error status (if 0 reads register from device)
+ */
+static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ struct rio_dev *nextdev = rdev->rswitch->nextdev[pnum];
+ u32 regval;
+ u32 far_ackid, far_linkstat, near_ackid;
+
+ if (err_status == 0)
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+ &err_status);
+
+ if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) {
+ pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
+ /*
+ * Send a Link-Request/Input-Status control symbol
+ */
+ if (rio_get_input_status(rdev, pnum, ®val)) {
+ pr_debug("RIO_EM: Input-status response timeout\n");
+ goto rd_err;
+ }
+
+ pr_debug("RIO_EM: SP%d Input-status response=0x%08x\n",
+ pnum, regval);
+ far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
+ far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+ ®val);
+ pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
+ near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
+ pr_debug("RIO_EM: SP%d far_ackID=0x%02x far_linkstat=0x%02x" \
+ " near_ackID=0x%02x\n",
+ pnum, far_ackid, far_linkstat, near_ackid);
+
+ /*
+ * If required, synchronize ackIDs of near and
+ * far sides.
+ */
+ if ((far_ackid != ((regval & RIO_PORT_N_ACK_OUTSTAND) >> 8)) ||
+ (far_ackid != (regval & RIO_PORT_N_ACK_OUTBOUND))) {
+ /* Align near outstanding/outbound ackIDs with
+ * far inbound.
+ */
+ rio_mport_write_config_32(mport, destid,
+ hopcount, rdev->phys_efptr +
+ RIO_PORT_N_ACK_STS_CSR(pnum),
+ (near_ackid << 24) |
+ (far_ackid << 8) | far_ackid);
+ /* Align far outstanding/outbound ackIDs with
+ * near inbound.
+ */
+ far_ackid++;
+ if (nextdev)
+ rio_write_config_32(nextdev,
+ nextdev->phys_efptr +
+ RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)),
+ (far_ackid << 24) |
+ (near_ackid << 8) | near_ackid);
+ else
+ pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n");
+ }
+rd_err:
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+ &err_status);
+ pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
+ }
+
+ if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) {
+ pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
+ rio_get_input_status(nextdev,
+ RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
+ udelay(50);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+ &err_status);
+ pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
+ }
+
+ return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+ RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0;
+}
+
+/**
* rio_inb_pwrite_handler - process inbound port-write message
* @pw_msg: pointer to inbound port-write message
*
@@ -507,7 +649,7 @@
struct rio_mport *mport;
u8 hopcount;
u16 destid;
- u32 err_status;
+ u32 err_status, em_perrdet, em_ltlerrdet;
int rc, portnum;
rdev = rio_get_comptag(pw_msg->em.comptag, NULL);
@@ -524,12 +666,11 @@
{
u32 i;
for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32);) {
- pr_debug("0x%02x: %08x %08x %08x %08x",
+ pr_debug("0x%02x: %08x %08x %08x %08x\n",
i*4, pw_msg->raw[i], pw_msg->raw[i + 1],
pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
i += 4;
}
- pr_debug("\n");
}
#endif
@@ -573,29 +714,28 @@
&err_status);
pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
- if (pw_msg->em.errdetect) {
- pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
- portnum, pw_msg->em.errdetect);
- /* Clear EM Port N Error Detect CSR */
- rio_mport_write_config_32(mport, destid, hopcount,
- rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
- }
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
- if (pw_msg->em.ltlerrdet) {
- pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
- pw_msg->em.ltlerrdet);
- /* Clear EM L/T Layer Error Detect CSR */
- rio_mport_write_config_32(mport, destid, hopcount,
- rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
- }
+ if (!(rdev->rswitch->port_ok & (1 << portnum))) {
+ rdev->rswitch->port_ok |= (1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 0);
+ /* Schedule Insertion Service */
+ pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
- /* Clear Port Errors */
- rio_mport_write_config_32(mport, destid, hopcount,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
- err_status & RIO_PORT_N_ERR_STS_CLR_MASK);
+ /* Clear error-stopped states (if reported).
+ * Depending on the link partner state, two attempts
+ * may be needed for successful recovery.
+ */
+ if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+ RIO_PORT_N_ERR_STS_PW_INP_ES)) {
+ if (rio_clr_err_stopped(rdev, portnum, err_status))
+ rio_clr_err_stopped(rdev, portnum, 0);
+ }
+ } else { /* if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) */
- if (rdev->rswitch->port_ok & (1 << portnum)) {
- if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) {
+ if (rdev->rswitch->port_ok & (1 << portnum)) {
rdev->rswitch->port_ok &= ~(1 << portnum);
rio_set_port_lockout(rdev, portnum, 1);
@@ -608,17 +748,33 @@
pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
rio_name(rdev), portnum);
}
- } else {
- if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
- rdev->rswitch->port_ok |= (1 << portnum);
- rio_set_port_lockout(rdev, portnum, 0);
-
- /* Schedule Insertion Service */
- pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
- rio_name(rdev), portnum);
- }
}
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+ if (em_perrdet) {
+ pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
+ portnum, em_perrdet);
+ /* Clear EM Port N Error Detect CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
+ }
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+ if (em_ltlerrdet) {
+ pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
+ em_ltlerrdet);
+ /* Clear EM L/T Layer Error Detect CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
+ }
+
+ /* Clear remaining error bits */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ err_status & RIO_PORT_N_ERR_STS_CLR_MASK);
+
/* Clear Port-Write Pending bit */
rio_mport_write_config_32(mport, destid, hopcount,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),