iwlegacy: remove reset rf infrastructure
We do not reset radio anymore, hence don't need that code too.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index 0ee6be6..da42442 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -1762,49 +1762,6 @@
#endif
}
-static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
- struct ieee80211_vif *vif,
- enum ieee80211_band band,
- struct iwl3945_scan_channel *scan_ch)
-{
- const struct ieee80211_supported_band *sband;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added = 0;
- u8 channel = 0;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband) {
- IWL_ERR(priv, "invalid band\n");
- return added;
- }
-
- active_dwell = iwl_legacy_get_active_dwell_time(priv, band, 0);
- passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
-
- channel = iwl_legacy_get_single_channel_number(priv, band);
-
- if (channel) {
- scan_ch->channel = channel;
- scan_ch->type = 0; /* passive */
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- added++;
- } else
- IWL_ERR(priv, "no valid channel found\n");
- return added;
-}
-
static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
enum ieee80211_band band,
u8 is_active, u8 n_probes,
@@ -2816,6 +2773,7 @@
enum ieee80211_band band;
bool is_active = false;
int ret;
+ u16 len;
lockdep_assert_held(&priv->mutex);
@@ -2834,17 +2792,14 @@
scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
if (iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS)) {
- u16 interval = 0;
+ u16 interval;
u32 extra;
u32 suspend_time = 100;
u32 scan_suspend_time = 100;
IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
- if (priv->is_internal_short_scan)
- interval = 0;
- else
- interval = vif->bss_conf.beacon_int;
+ interval = vif->bss_conf.beacon_int;
scan->suspend_time = 0;
scan->max_out_time = cpu_to_le32(200 * 1024);
@@ -2866,9 +2821,7 @@
scan_suspend_time, interval);
}
- if (priv->is_internal_short_scan) {
- IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
- } else if (priv->scan_request->n_ssids) {
+ if (priv->scan_request->n_ssids) {
int i, p = 0;
IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
for (i = 0; i < priv->scan_request->n_ssids; i++) {
@@ -2919,36 +2872,17 @@
scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
IWL_GOOD_CRC_TH_DISABLED;
- if (!priv->is_internal_short_scan) {
- scan->tx_cmd.len = cpu_to_le16(
- iwl_legacy_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- vif->addr,
- priv->scan_request->ie,
- priv->scan_request->ie_len,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
- } else {
- /* use bcast addr, will not be transmitted but must be valid */
- scan->tx_cmd.len = cpu_to_le16(
- iwl_legacy_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- iwlegacy_bcast_addr, NULL, 0,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
- }
+ len = iwl_legacy_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
+ vif->addr, priv->scan_request->ie,
+ priv->scan_request->ie_len,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
+ scan->tx_cmd.len = cpu_to_le16(len);
+
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
- if (priv->is_internal_short_scan) {
- scan->channel_count =
- iwl3945_get_single_channel_for_scan(priv, vif, band,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- } else {
- scan->channel_count =
- iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
- }
-
+ scan->channel_count = iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
+ (void *)&scan->data[len], vif);
if (scan->channel_count == 0) {
IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
return -EIO;
@@ -3824,10 +3758,7 @@
priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
/* initialize force reset */
- priv->force_reset[IWL_RF_RESET].reset_duration =
- IWL_DELAY_NEXT_FORCE_RF_RESET;
- priv->force_reset[IWL_FW_RESET].reset_duration =
- IWL_DELAY_NEXT_FORCE_FW_RELOAD;
+ priv->force_reset.reset_duration = IWL_DELAY_NEXT_FORCE_FW_RELOAD;
if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",