[ALSA] Add echoaudio sound drivers
From: Giuliano Pochini <pochini@shiny.it>Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24,
indigo, indigodj, indigoio, layla20, lala24, mia, mona)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 39162af..23e54ce 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -233,6 +233,143 @@
To compile this driver as a module, choose M here: the module
will be called snd-cs5535audio.
+config SND_DARLA20
+ tristate "(Echoaudio) Darla20"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla20
+
+config SND_GINA20
+ tristate "(Echoaudio) Gina20"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina20
+
+config SND_LAYLA20
+ tristate "(Echoaudio) Layla20"
+ depends on SND
+ depends on FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla20
+
+config SND_DARLA24
+ tristate "(Echoaudio) Darla24"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Darla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-darla24
+
+config SND_GINA24
+ tristate "(Echoaudio) Gina24"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-gina24
+
+config SND_LAYLA24
+ tristate "(Echoaudio) Layla24"
+ depends on SND
+ depends on FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Layla24.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-layla24
+
+config SND_MONA
+ tristate "(Echoaudio) Mona"
+ depends on SND
+ depends on FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mona.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mona
+
+config SND_MIA
+ tristate "(Echoaudio) Mia"
+ depends on SND
+ depends on FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-mia
+
+config SND_ECHO3G
+ tristate "(Echoaudio) 3G cards"
+ depends on SND
+ depends on FW_LOADER
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-echo3g
+
+config SND_INDIGO
+ tristate "(Echoaudio) Indigo"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigo
+
+config SND_INDIGOIO
+ tristate "(Echoaudio) Indigo IO"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigoio
+
+config SND_INDIGODJ
+ tristate "(Echoaudio) Indigo DJ"
+ depends on SND
+ depends on FW_LOADER
+ select SND_PCM
+ help
+ Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-indigodj
+
config SND_EMU10K1
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
depends on SND
diff --git a/sound/pci/Makefile b/sound/pci/Makefile
index cba5105..e06736d 100644
--- a/sound/pci/Makefile
+++ b/sound/pci/Makefile
@@ -57,6 +57,7 @@
ca0106/ \
cs46xx/ \
cs5535audio/ \
+ echoaudio/ \
emu10k1/ \
hda/ \
ice1712/ \
diff --git a/sound/pci/echoaudio/Makefile b/sound/pci/echoaudio/Makefile
new file mode 100644
index 0000000..02ab0e5
--- /dev/null
+++ b/sound/pci/echoaudio/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for ALSA Echoaudio soundcard drivers
+# Copyright (c) 2003 by Giuliano Pochini <pochini@shiny.it>
+#
+
+snd-darla20-objs := darla20.o
+snd-gina20-objs := gina20.o
+snd-layla20-objs := layla20.o
+snd-darla24-objs := darla24.o
+snd-gina24-objs := gina24.o
+snd-layla24-objs := layla24.o
+snd-mona-objs := mona.o
+snd-mia-objs := mia.o
+snd-echo3g-objs := echo3g.o
+snd-indigo-objs := indigo.o
+snd-indigoio-objs := indigoio.o
+snd-indigodj-objs := indigodj.o
diff --git a/sound/pci/echoaudio/darla20.c b/sound/pci/echoaudio/darla20.c
new file mode 100644
index 0000000..b7108e2
--- /dev/null
+++ b/sound/pci/echoaudio/darla20.c
@@ -0,0 +1,99 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA20
+#define ECHOCARD_NAME "Darla20"
+#define ECHOCARD_HAS_MONITOR
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 0 */
+#define PX_ANALOG_IN 8 /* 2 */
+#define PX_DIGITAL_IN 10 /* 0 */
+#define PX_NUM 10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 8 */
+#define BX_DIGITAL_OUT 8 /* 0 */
+#define BX_ANALOG_IN 8 /* 2 */
+#define BX_DIGITAL_IN 10 /* 0 */
+#define BX_NUM 10
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_DARLA20_DSP 0
+
+static const struct firmware card_fw[] = {
+ {0, "darla20_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x1801, 0xECC0, 0x0010, 0, 0, 0}, /* DSP 56301 Darla20 rev.0 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+ .rate_min = 44100,
+ .rate_max = 48000,
+ .channels_min = 1,
+ .channels_max = 2,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/darla20_dsp.c b/sound/pci/echoaudio/darla20_dsp.c
new file mode 100644
index 0000000..4159e3b
--- /dev/null
+++ b/sound/pci/echoaudio/darla20_dsp.c
@@ -0,0 +1,125 @@
+/***************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Darla20\n"));
+ snd_assert((subdevice_id & 0xfff0) == DARLA20, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_DARLA20_DSP];
+ chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+ chip->clock_state = GD_CLOCK_UNDEF;
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+/* The Darla20 has no external clock sources */
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The Darla20 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u8 clock_state, spdif_status;
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ switch (rate) {
+ case 44100:
+ clock_state = GD_CLOCK_44;
+ spdif_status = GD_SPDIF_STATUS_44;
+ break;
+ case 48000:
+ clock_state = GD_CLOCK_48;
+ spdif_status = GD_SPDIF_STATUS_48;
+ break;
+ default:
+ clock_state = GD_CLOCK_NOCHANGE;
+ spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+ break;
+ }
+
+ if (chip->clock_state == clock_state)
+ clock_state = GD_CLOCK_NOCHANGE;
+ if (spdif_status == chip->spdif_status)
+ spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->comm_page->gd_clock_state = clock_state;
+ chip->comm_page->gd_spdif_status = spdif_status;
+ chip->comm_page->gd_resampler_state = 3; /* magic number - should always be 3 */
+
+ /* Save the new audio state if it changed */
+ if (clock_state != GD_CLOCK_NOCHANGE)
+ chip->clock_state = clock_state;
+ if (spdif_status != GD_SPDIF_STATUS_NOCHANGE)
+ chip->spdif_status = spdif_status;
+ chip->sample_rate = rate;
+
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
new file mode 100644
index 0000000..e59a982
--- /dev/null
+++ b/sound/pci/echoaudio/darla24.c
@@ -0,0 +1,106 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA24
+#define ECHOCARD_NAME "Darla24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 0 */
+#define PX_ANALOG_IN 8 /* 2 */
+#define PX_DIGITAL_IN 10 /* 0 */
+#define PX_NUM 10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 8 */
+#define BX_DIGITAL_OUT 8 /* 0 */
+#define BX_ANALOG_IN 8 /* 2 */
+#define BX_DIGITAL_IN 10 /* 0 */
+#define BX_NUM 10
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_DARLA24_DSP 0
+
+static const struct firmware card_fw[] = {
+ {0, "darla24_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0}, /* DSP 56301 Darla24 rev.0 */
+ {0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0}, /* DSP 56301 Darla24 rev.1 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 8000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c
new file mode 100644
index 0000000..79938ee
--- /dev/null
+++ b/sound/pci/echoaudio/darla24_dsp.c
@@ -0,0 +1,156 @@
+/***************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Darla24\n"));
+ snd_assert((subdevice_id & 0xfff0) == DARLA24, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_DARLA24_DSP];
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+ ECHO_CLOCK_BIT_ESYNC;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC)
+ clock_bits |= ECHO_CLOCK_BIT_ESYNC;
+
+ return clock_bits;
+}
+
+
+
+/* The Darla24 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u8 clock;
+
+ switch (rate) {
+ case 96000:
+ clock = GD24_96000;
+ break;
+ case 88200:
+ clock = GD24_88200;
+ break;
+ case 48000:
+ clock = GD24_48000;
+ break;
+ case 44100:
+ clock = GD24_44100;
+ break;
+ case 32000:
+ clock = GD24_32000;
+ break;
+ case 22050:
+ clock = GD24_22050;
+ break;
+ case 16000:
+ clock = GD24_16000;
+ break;
+ case 11025:
+ clock = GD24_11025;
+ break;
+ case 8000:
+ clock = GD24_8000;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: Error, invalid sample rate %d\n",
+ rate));
+ return -EINVAL;
+ }
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+ chip->sample_rate = rate;
+
+ /* Override the sample rate if this card is set to Echo sync. */
+ if (chip->input_clock == ECHO_CLOCK_ESYNC)
+ clock = GD24_EXT_SYNC;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP ? */
+ chip->comm_page->gd_clock_state = clock;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ snd_assert(clock == ECHO_CLOCK_INTERNAL ||
+ clock == ECHO_CLOCK_ESYNC, return -EINVAL);
+ chip->input_clock = clock;
+ return set_sample_rate(chip, chip->sample_rate);
+}
+
diff --git a/sound/pci/echoaudio/echo3g.c b/sound/pci/echoaudio/echo3g.c
new file mode 100644
index 0000000..12099fe
--- /dev/null
+++ b/sound/pci/echoaudio/echo3g.c
@@ -0,0 +1,118 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHO3G_FAMILY
+#define ECHOCARD_ECHO3G
+#define ECHOCARD_NAME "Echo3G"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_ADAT 6
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_PHANTOM_POWER
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0
+#define PX_DIGITAL_OUT chip->px_digital_out
+#define PX_ANALOG_IN chip->px_analog_in
+#define PX_DIGITAL_IN chip->px_digital_in
+#define PX_NUM chip->px_num
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0
+#define BX_DIGITAL_OUT chip->bx_digital_out
+#define BX_ANALOG_IN chip->bx_analog_in
+#define BX_DIGITAL_IN chip->bx_digital_in
+#define BX_NUM chip->bx_num
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_ECHO3G_DSP 1
+#define FW_3G_ASIC 2
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "echo3g_dsp.fw"},
+ {0, "3g_asic.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x3410, 0xECC0, 0x0100, 0, 0, 0}, /* Echo 3G */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 32000,
+ .rate_max = 100000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+};
+
+#include "echo3g_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_3g.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/echo3g_dsp.c b/sound/pci/echoaudio/echo3g_dsp.c
new file mode 100644
index 0000000..d26a1d1
--- /dev/null
+++ b/sound/pci/echoaudio/echo3g_dsp.c
@@ -0,0 +1,131 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+static int load_asic(struct echoaudio *chip);
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int check_asic_status(struct echoaudio *chip);
+static int set_sample_rate(struct echoaudio *chip, u32 rate);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_phantom_power(struct echoaudio *chip, char on);
+static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
+ char force);
+
+#include <linux/irq.h>
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ local_irq_enable();
+ DE_INIT(("init_hw() - Echo3G\n"));
+ snd_assert((subdevice_id & 0xfff0) == ECHO3G, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->comm_page->e3g_frq_register =
+ __constant_cpu_to_le32((E3G_MAGIC_NUMBER / 48000) - 2);
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->has_midi = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_ECHO3G_DSP];
+
+ /* Load the DSP code and the ASIC on the PCI card and get
+ what type of external box is attached */
+ err = load_firmware(chip);
+
+ if (err < 0) {
+ return err;
+ } else if (err == E3G_GINA3G_BOX_TYPE) {
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+ ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_ADAT;
+ chip->card_name = "Gina3G";
+ chip->px_digital_out = chip->bx_digital_out = 6;
+ chip->px_analog_in = chip->bx_analog_in = 14;
+ chip->px_digital_in = chip->bx_digital_in = 16;
+ chip->px_num = chip->bx_num = 24;
+ chip->has_phantom_power = TRUE;
+ chip->hasnt_input_nominal_level = TRUE;
+ } else if (err == E3G_LAYLA3G_BOX_TYPE) {
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+ ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_ADAT |
+ ECHO_CLOCK_BIT_WORD;
+ chip->card_name = "Layla3G";
+ chip->px_digital_out = chip->bx_digital_out = 8;
+ chip->px_analog_in = chip->bx_analog_in = 16;
+ chip->px_digital_in = chip->bx_digital_in = 24;
+ chip->px_num = chip->bx_num = 32;
+ } else {
+ return -ENODEV;
+ }
+
+ chip->digital_modes = ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->non_audio_spdif = FALSE;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+ err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+ snd_assert(err >= 0, return err);
+ err = set_phantom_power(chip, 0);
+ snd_assert(err >= 0, return err);
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static int set_phantom_power(struct echoaudio *chip, char on)
+{
+ u32 control_reg = le32_to_cpu(chip->comm_page->control_register);
+
+ if (on)
+ control_reg |= E3G_PHANTOM_POWER;
+ else
+ control_reg &= ~E3G_PHANTOM_POWER;
+
+ chip->phantom_power = on;
+ return write_control_reg(chip, control_reg,
+ le32_to_cpu(chip->comm_page->e3g_frq_register),
+ 0);
+}
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
new file mode 100644
index 0000000..e695502
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -0,0 +1,2197 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+MODULE_AUTHOR("Giuliano Pochini <pochini@shiny.it>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Echoaudio " ECHOCARD_NAME " soundcards driver");
+MODULE_SUPPORTED_DEVICE("{{Echoaudio," ECHOCARD_NAME "}}");
+MODULE_DEVICE_TABLE(pci, snd_echo_ids);
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for " ECHOCARD_NAME " soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for " ECHOCARD_NAME " soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable " ECHOCARD_NAME " soundcard.");
+
+static unsigned int channels_list[10] = {1, 2, 4, 6, 8, 10, 12, 14, 16, 999999};
+
+static int get_firmware(const struct firmware **fw_entry,
+ const struct firmware *frm, struct echoaudio *chip)
+{
+ int err;
+ char name[30];
+ DE_ACT(("firmware requested: %s\n", frm->data));
+ snprintf(name, sizeof(name), "ea/%s", frm->data);
+ if ((err = request_firmware(fw_entry, name, pci_device(chip))) < 0)
+ snd_printk(KERN_ERR "get_firmware(): Firmware not available (%d)\n", err);
+ return err;
+}
+
+static void free_firmware(const struct firmware *fw_entry)
+{
+ release_firmware(fw_entry);
+ DE_ACT(("firmware released\n"));
+}
+
+
+
+/******************************************************************************
+ PCM interface
+******************************************************************************/
+
+static void audiopipe_free(struct snd_pcm_runtime *runtime)
+{
+ struct audiopipe *pipe = runtime->private_data;
+
+ if (pipe->sgpage.area)
+ snd_dma_free_pages(&pipe->sgpage);
+ kfree(pipe);
+}
+
+
+
+static int hw_rule_capture_format_by_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_mask fmt;
+
+ snd_mask_any(&fmt);
+
+#ifndef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+ /* >=2 channels cannot be S32_BE */
+ if (c->min == 2) {
+ fmt.bits[0] &= ~SNDRV_PCM_FMTBIT_S32_BE;
+ return snd_mask_refine(f, &fmt);
+ }
+#endif
+ /* > 2 channels cannot be U8 and S32_BE */
+ if (c->min > 2) {
+ fmt.bits[0] &= ~(SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S32_BE);
+ return snd_mask_refine(f, &fmt);
+ }
+ /* Mono is ok with any format */
+ return 0;
+}
+
+
+
+static int hw_rule_capture_channels_by_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_interval ch;
+
+ snd_interval_any(&ch);
+
+ /* S32_BE is mono (and stereo) only */
+ if (f->bits[0] == SNDRV_PCM_FMTBIT_S32_BE) {
+ ch.min = 1;
+#ifdef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+ ch.max = 2;
+#else
+ ch.max = 1;
+#endif
+ ch.integer = 1;
+ return snd_interval_refine(c, &ch);
+ }
+ /* U8 can be only mono or stereo */
+ if (f->bits[0] == SNDRV_PCM_FMTBIT_U8) {
+ ch.min = 1;
+ ch.max = 2;
+ ch.integer = 1;
+ return snd_interval_refine(c, &ch);
+ }
+ /* S16_LE, S24_3LE and S32_LE support any number of channels. */
+ return 0;
+}
+
+
+
+static int hw_rule_playback_format_by_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_mask fmt;
+ u64 fmask;
+ snd_mask_any(&fmt);
+
+ fmask = fmt.bits[0] + ((u64)fmt.bits[1] << 32);
+
+ /* >2 channels must be S16_LE, S24_3LE or S32_LE */
+ if (c->min > 2) {
+ fmask &= SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE;
+ /* 1 channel must be S32_BE or S32_LE */
+ } else if (c->max == 1)
+ fmask &= SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE;
+#ifndef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+ /* 2 channels cannot be S32_BE */
+ else if (c->min == 2 && c->max == 2)
+ fmask &= ~SNDRV_PCM_FMTBIT_S32_BE;
+#endif
+ else
+ return 0;
+
+ fmt.bits[0] &= (u32)fmask;
+ fmt.bits[1] &= (u32)(fmask >> 32);
+ return snd_mask_refine(f, &fmt);
+}
+
+
+
+static int hw_rule_playback_channels_by_format(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *f = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ struct snd_interval ch;
+ u64 fmask;
+
+ snd_interval_any(&ch);
+ ch.integer = 1;
+ fmask = f->bits[0] + ((u64)f->bits[1] << 32);
+
+ /* S32_BE is mono (and stereo) only */
+ if (fmask == SNDRV_PCM_FMTBIT_S32_BE) {
+ ch.min = 1;
+#ifdef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+ ch.max = 2;
+#else
+ ch.max = 1;
+#endif
+ /* U8 is stereo only */
+ } else if (fmask == SNDRV_PCM_FMTBIT_U8)
+ ch.min = ch.max = 2;
+ /* S16_LE and S24_3LE must be at least stereo */
+ else if (!(fmask & ~(SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE)))
+ ch.min = 2;
+ else
+ return 0;
+
+ return snd_interval_refine(c, &ch);
+}
+
+
+
+/* Since the sample rate is a global setting, do allow the user to change the
+sample rate only if there is only one pcm device open. */
+static int hw_rule_sample_rate(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct snd_interval *rate = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_RATE);
+ struct echoaudio *chip = rule->private;
+ struct snd_interval fixed;
+
+ if (!chip->can_set_rate) {
+ snd_interval_any(&fixed);
+ fixed.min = fixed.max = chip->sample_rate;
+ return snd_interval_refine(rate, &fixed);
+ }
+ return 0;
+}
+
+
+static int pcm_open(struct snd_pcm_substream *substream,
+ signed char max_channels)
+{
+ struct echoaudio *chip;
+ struct snd_pcm_runtime *runtime;
+ struct audiopipe *pipe;
+ int err, i;
+
+ if (max_channels <= 0)
+ return -EAGAIN;
+
+ chip = snd_pcm_substream_chip(substream);
+ runtime = substream->runtime;
+
+ if (!(pipe = kmalloc(sizeof(struct audiopipe), GFP_KERNEL)))
+ return -ENOMEM;
+ memset(pipe, 0, sizeof(struct audiopipe));
+ pipe->index = -1; /* Not configured yet */
+
+ /* Set up hw capabilities and contraints */
+ memcpy(&pipe->hw, &pcm_hardware_skel, sizeof(struct snd_pcm_hardware));
+ DE_HWP(("max_channels=%d\n", max_channels));
+ pipe->constr.list = channels_list;
+ pipe->constr.mask = 0;
+ for (i = 0; channels_list[i] <= max_channels; i++);
+ pipe->constr.count = i;
+ if (pipe->hw.channels_max > max_channels)
+ pipe->hw.channels_max = max_channels;
+ if (chip->digital_mode == DIGITAL_MODE_ADAT) {
+ pipe->hw.rate_max = 48000;
+ pipe->hw.rates &= SNDRV_PCM_RATE_8000_48000;
+ }
+
+ runtime->hw = pipe->hw;
+ runtime->private_data = pipe;
+ runtime->private_free = audiopipe_free;
+ snd_pcm_set_sync(substream);
+
+ /* Only mono and any even number of channels are allowed */
+ if ((err = snd_pcm_hw_constraint_list(runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ &pipe->constr)) < 0)
+ return err;
+
+ /* All periods should have the same size */
+ if ((err = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+ return err;
+
+ /* The hw accesses memory in chunks 32 frames long and they should be
+ 32-bytes-aligned. It's not a requirement, but it seems that IRQs are
+ generated with a resolution of 32 frames. Thus we need the following */
+ if ((err = snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+ 32)) < 0)
+ return err;
+ if ((err = snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 32)) < 0)
+ return err;
+
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ hw_rule_sample_rate, chip,
+ SNDRV_PCM_HW_PARAM_RATE, -1)) < 0)
+ return err;
+
+ /* Finally allocate a page for the scatter-gather list */
+ if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
+ snd_dma_pci_data(chip->pci),
+ PAGE_SIZE, &pipe->sgpage)) < 0) {
+ DE_HWP(("s-g list allocation failed\n"));
+ return err;
+ }
+
+ return 0;
+}
+
+
+
+static int pcm_analog_in_open(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ int err;
+
+ DE_ACT(("pcm_analog_in_open\n"));
+ if ((err = pcm_open(substream, num_analog_busses_in(chip) -
+ substream->number)) < 0)
+ return err;
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ hw_rule_capture_channels_by_format, NULL,
+ SNDRV_PCM_HW_PARAM_FORMAT, -1)) < 0)
+ return err;
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_FORMAT,
+ hw_rule_capture_format_by_channels, NULL,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1)) < 0)
+ return err;
+ atomic_inc(&chip->opencount);
+ if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
+ chip->can_set_rate=0;
+ DE_HWP(("pcm_analog_in_open cs=%d oc=%d r=%d\n",
+ chip->can_set_rate, atomic_read(&chip->opencount),
+ chip->sample_rate));
+ return 0;
+}
+
+
+
+static int pcm_analog_out_open(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ int max_channels, err;
+
+#ifdef ECHOCARD_HAS_VMIXER
+ max_channels = num_pipes_out(chip);
+#else
+ max_channels = num_analog_busses_out(chip);
+#endif
+ DE_ACT(("pcm_analog_out_open\n"));
+ if ((err = pcm_open(substream, max_channels - substream->number)) < 0)
+ return err;
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ hw_rule_playback_channels_by_format,
+ NULL,
+ SNDRV_PCM_HW_PARAM_FORMAT, -1)) < 0)
+ return err;
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_FORMAT,
+ hw_rule_playback_format_by_channels,
+ NULL,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1)) < 0)
+ return err;
+ atomic_inc(&chip->opencount);
+ if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
+ chip->can_set_rate=0;
+ DE_HWP(("pcm_analog_out_open cs=%d oc=%d r=%d\n",
+ chip->can_set_rate, atomic_read(&chip->opencount),
+ chip->sample_rate));
+ return 0;
+}
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+
+static int pcm_digital_in_open(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ int err, max_channels;
+
+ DE_ACT(("pcm_digital_in_open\n"));
+ max_channels = num_digital_busses_in(chip) - substream->number;
+ down(&chip->mode_mutex);
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ err = pcm_open(substream, max_channels);
+ else /* If the card has ADAT, subtract the 6 channels
+ * that S/PDIF doesn't have
+ */
+ err = pcm_open(substream, max_channels - ECHOCARD_HAS_ADAT);
+
+ if (err < 0)
+ goto din_exit;
+
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ hw_rule_capture_channels_by_format, NULL,
+ SNDRV_PCM_HW_PARAM_FORMAT, -1)) < 0)
+ goto din_exit;
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_FORMAT,
+ hw_rule_capture_format_by_channels, NULL,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1)) < 0)
+ goto din_exit;
+
+ atomic_inc(&chip->opencount);
+ if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
+ chip->can_set_rate=0;
+
+din_exit:
+ up(&chip->mode_mutex);
+ return err;
+}
+
+
+
+#ifndef ECHOCARD_HAS_VMIXER /* See the note in snd_echo_new_pcm() */
+
+static int pcm_digital_out_open(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ int err, max_channels;
+
+ DE_ACT(("pcm_digital_out_open\n"));
+ max_channels = num_digital_busses_out(chip) - substream->number;
+ down(&chip->mode_mutex);
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ err = pcm_open(substream, max_channels);
+ else /* If the card has ADAT, subtract the 6 channels
+ * that S/PDIF doesn't have
+ */
+ err = pcm_open(substream, max_channels - ECHOCARD_HAS_ADAT);
+
+ if (err < 0)
+ goto dout_exit;
+
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_CHANNELS,
+ hw_rule_playback_channels_by_format,
+ NULL, SNDRV_PCM_HW_PARAM_FORMAT,
+ -1)) < 0)
+ goto dout_exit;
+ if ((err = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_FORMAT,
+ hw_rule_playback_format_by_channels,
+ NULL, SNDRV_PCM_HW_PARAM_CHANNELS,
+ -1)) < 0)
+ goto dout_exit;
+ atomic_inc(&chip->opencount);
+ if (atomic_read(&chip->opencount) > 1 && chip->rate_set)
+ chip->can_set_rate=0;
+dout_exit:
+ up(&chip->mode_mutex);
+ return err;
+}
+
+#endif /* !ECHOCARD_HAS_VMIXER */
+
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+static int pcm_close(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ int oc;
+
+ /* Nothing to do here. Audio is already off and pipe will be
+ * freed by its callback
+ */
+ DE_ACT(("pcm_close\n"));
+
+ atomic_dec(&chip->opencount);
+ oc = atomic_read(&chip->opencount);
+ DE_ACT(("pcm_close oc=%d cs=%d rs=%d\n", oc,
+ chip->can_set_rate, chip->rate_set));
+ if (oc < 2)
+ chip->can_set_rate = 1;
+ if (oc == 0)
+ chip->rate_set = 0;
+ DE_ACT(("pcm_close2 oc=%d cs=%d rs=%d\n", oc,
+ chip->can_set_rate,chip->rate_set));
+
+ return 0;
+}
+
+
+
+/* Channel allocation and scatter-gather list setup */
+static int init_engine(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params,
+ int pipe_index, int interleave)
+{
+ struct echoaudio *chip;
+ int err, per, rest, page, edge, offs;
+ struct snd_sg_buf *sgbuf;
+ struct audiopipe *pipe;
+
+ chip = snd_pcm_substream_chip(substream);
+ pipe = (struct audiopipe *) substream->runtime->private_data;
+
+ /* Sets up che hardware. If it's already initialized, reset and
+ * redo with the new parameters
+ */
+ spin_lock_irq(&chip->lock);
+ if (pipe->index >= 0) {
+ DE_HWP(("hwp_ie free(%d)\n", pipe->index));
+ err = free_pipes(chip, pipe);
+ snd_assert(!err);
+ chip->substream[pipe->index] = NULL;
+ }
+
+ err = allocate_pipes(chip, pipe, pipe_index, interleave);
+ if (err < 0) {
+ spin_unlock_irq(&chip->lock);
+ DE_ACT((KERN_NOTICE "allocate_pipes(%d) err=%d\n",
+ pipe_index, err));
+ return err;
+ }
+ spin_unlock_irq(&chip->lock);
+ DE_ACT((KERN_NOTICE "allocate_pipes()=%d\n", pipe_index));
+
+ DE_HWP(("pcm_hw_params (bufsize=%dB periods=%d persize=%dB)\n",
+ params_buffer_bytes(hw_params), params_periods(hw_params),
+ params_period_bytes(hw_params)));
+ err = snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+ if (err < 0) {
+ snd_printk(KERN_ERR "malloc_pages err=%d\n", err);
+ spin_lock_irq(&chip->lock);
+ free_pipes(chip, pipe);
+ spin_unlock_irq(&chip->lock);
+ pipe->index = -1;
+ return err;
+ }
+
+ sgbuf = snd_pcm_substream_sgbuf(substream);
+
+ DE_HWP(("pcm_hw_params table size=%d pages=%d\n",
+ sgbuf->size, sgbuf->pages));
+ sglist_init(chip, pipe);
+ edge = PAGE_SIZE;
+ for (offs = page = per = 0; offs < params_buffer_bytes(hw_params);
+ per++) {
+ rest = params_period_bytes(hw_params);
+ if (offs + rest > params_buffer_bytes(hw_params))
+ rest = params_buffer_bytes(hw_params) - offs;
+ while (rest) {
+ if (rest <= edge - offs) {
+ sglist_add_mapping(chip, pipe,
+ snd_sgbuf_get_addr(sgbuf, offs),
+ rest);
+ sglist_add_irq(chip, pipe);
+ offs += rest;
+ rest = 0;
+ } else {
+ sglist_add_mapping(chip, pipe,
+ snd_sgbuf_get_addr(sgbuf, offs),
+ edge - offs);
+ rest -= edge - offs;
+ offs = edge;
+ }
+ if (offs == edge) {
+ edge += PAGE_SIZE;
+ page++;
+ }
+ }
+ }
+
+ /* Close the ring buffer */
+ sglist_wrap(chip, pipe);
+
+ /* This stuff is used by the irq handler, so it must be
+ * initialized before chip->substream
+ */
+ chip->last_period[pipe_index] = 0;
+ pipe->last_counter = 0;
+ pipe->position = 0;
+ smp_wmb();
+ chip->substream[pipe_index] = substream;
+ chip->rate_set = 1;
+ spin_lock_irq(&chip->lock);
+ set_sample_rate(chip, hw_params->rate_num / hw_params->rate_den);
+ spin_unlock_irq(&chip->lock);
+ DE_HWP(("pcm_hw_params ok\n"));
+ return 0;
+}
+
+
+
+static int pcm_analog_in_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+ return init_engine(substream, hw_params, px_analog_in(chip) +
+ substream->number, params_channels(hw_params));
+}
+
+
+
+static int pcm_analog_out_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ return init_engine(substream, hw_params, substream->number,
+ params_channels(hw_params));
+}
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+
+static int pcm_digital_in_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+ return init_engine(substream, hw_params, px_digital_in(chip) +
+ substream->number, params_channels(hw_params));
+}
+
+
+
+#ifndef ECHOCARD_HAS_VMIXER /* See the note in snd_echo_new_pcm() */
+static int pcm_digital_out_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+
+ return init_engine(substream, hw_params, px_digital_out(chip) +
+ substream->number, params_channels(hw_params));
+}
+#endif /* !ECHOCARD_HAS_VMIXER */
+
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+static int pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip;
+ struct audiopipe *pipe;
+
+ chip = snd_pcm_substream_chip(substream);
+ pipe = (struct audiopipe *) substream->runtime->private_data;
+
+ spin_lock_irq(&chip->lock);
+ if (pipe->index >= 0) {
+ DE_HWP(("pcm_hw_free(%d)\n", pipe->index));
+ free_pipes(chip, pipe);
+ chip->substream[pipe->index] = NULL;
+ pipe->index = -1;
+ }
+ spin_unlock_irq(&chip->lock);
+
+ DE_HWP(("pcm_hw_freed\n"));
+ snd_pcm_lib_free_pages(substream);
+ return 0;
+}
+
+
+
+static int pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct audioformat format;
+ int pipe_index = ((struct audiopipe *)runtime->private_data)->index;
+
+ DE_HWP(("Prepare rate=%d format=%d channels=%d\n",
+ runtime->rate, runtime->format, runtime->channels));
+ format.interleave = runtime->channels;
+ format.data_are_bigendian = 0;
+ format.mono_to_stereo = 0;
+ switch (runtime->format) {
+ case SNDRV_PCM_FORMAT_U8:
+ format.bits_per_sample = 8;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ format.bits_per_sample = 16;
+ break;
+ case SNDRV_PCM_FORMAT_S24_3LE:
+ format.bits_per_sample = 24;
+ break;
+ case SNDRV_PCM_FORMAT_S32_BE:
+ format.data_are_bigendian = 1;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ format.bits_per_sample = 32;
+ break;
+ default:
+ DE_HWP(("Prepare error: unsupported format %d\n",
+ runtime->format));
+ return -EINVAL;
+ }
+
+ snd_assert(pipe_index < px_num(chip), return -EINVAL);
+ snd_assert(is_pipe_allocated(chip, pipe_index), return -EINVAL);
+ set_audio_format(chip, pipe_index, &format);
+ return 0;
+}
+
+
+
+static int pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct echoaudio *chip = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct audiopipe *pipe = runtime->private_data;
+ int i, err;
+ u32 channelmask = 0;
+ struct list_head *pos;
+ struct snd_pcm_substream *s;
+
+ snd_pcm_group_for_each(pos, substream) {
+ s = snd_pcm_group_substream_entry(pos);
+ for (i = 0; i < DSP_MAXPIPES; i++) {
+ if (s == chip->substream[i]) {
+ channelmask |= 1 << i;
+ snd_pcm_trigger_done(s, substream);
+ }
+ }
+ }
+
+ spin_lock(&chip->lock);
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ DE_ACT(("pcm_trigger start\n"));
+ for (i = 0; i < DSP_MAXPIPES; i++) {
+ if (channelmask & (1 << i)) {
+ pipe = chip->substream[i]->runtime->private_data;
+ switch (pipe->state) {
+ case PIPE_STATE_STOPPED:
+ chip->last_period[i] = 0;
+ pipe->last_counter = 0;
+ pipe->position = 0;
+ *pipe->dma_counter = 0;
+ case PIPE_STATE_PAUSED:
+ pipe->state = PIPE_STATE_STARTED;
+ break;
+ case PIPE_STATE_STARTED:
+ break;
+ }
+ }
+ }
+ err = start_transport(chip, channelmask,
+ chip->pipe_cyclic_mask);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ DE_ACT(("pcm_trigger stop\n"));
+ for (i = 0; i < DSP_MAXPIPES; i++) {
+ if (channelmask & (1 << i)) {
+ pipe = chip->substream[i]->runtime->private_data;
+ pipe->state = PIPE_STATE_STOPPED;
+ }
+ }
+ err = stop_transport(chip, channelmask);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ DE_ACT(("pcm_trigger pause\n"));
+ for (i = 0; i < DSP_MAXPIPES; i++) {
+ if (channelmask & (1 << i)) {
+ pipe = chip->substream[i]->runtime->private_data;
+ pipe->state = PIPE_STATE_PAUSED;
+ }
+ }
+ err = pause_transport(chip, channelmask);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ spin_unlock(&chip->lock);
+ return err;
+}
+
+
+
+static snd_pcm_uframes_t pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct audiopipe *pipe = runtime->private_data;
+ size_t cnt, bufsize, pos;
+
+ cnt = le32_to_cpu(*pipe->dma_counter);
+ pipe->position += cnt - pipe->last_counter;
+ pipe->last_counter = cnt;
+ bufsize = substream->runtime->buffer_size;
+ pos = bytes_to_frames(substream->runtime, pipe->position);
+
+ while (pos >= bufsize) {
+ pipe->position -= frames_to_bytes(substream->runtime, bufsize);
+ pos -= bufsize;
+ }
+ return pos;
+}
+
+
+
+/* pcm *_ops structures */
+static struct snd_pcm_ops analog_playback_ops = {
+ .open = pcm_analog_out_open,
+ .close = pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = pcm_analog_out_hw_params,
+ .hw_free = pcm_hw_free,
+ .prepare = pcm_prepare,
+ .trigger = pcm_trigger,
+ .pointer = pcm_pointer,
+ .page = snd_pcm_sgbuf_ops_page,
+};
+static struct snd_pcm_ops analog_capture_ops = {
+ .open = pcm_analog_in_open,
+ .close = pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = pcm_analog_in_hw_params,
+ .hw_free = pcm_hw_free,
+ .prepare = pcm_prepare,
+ .trigger = pcm_trigger,
+ .pointer = pcm_pointer,
+ .page = snd_pcm_sgbuf_ops_page,
+};
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+#ifndef ECHOCARD_HAS_VMIXER
+static struct snd_pcm_ops digital_playback_ops = {
+ .open = pcm_digital_out_open,
+ .close = pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = pcm_digital_out_hw_params,
+ .hw_free = pcm_hw_free,
+ .prepare = pcm_prepare,
+ .trigger = pcm_trigger,
+ .pointer = pcm_pointer,
+ .page = snd_pcm_sgbuf_ops_page,
+};
+#endif /* !ECHOCARD_HAS_VMIXER */
+static struct snd_pcm_ops digital_capture_ops = {
+ .open = pcm_digital_in_open,
+ .close = pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = pcm_digital_in_hw_params,
+ .hw_free = pcm_hw_free,
+ .prepare = pcm_prepare,
+ .trigger = pcm_trigger,
+ .pointer = pcm_pointer,
+ .page = snd_pcm_sgbuf_ops_page,
+};
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+/* Preallocate memory only for the first substream because it's the most
+ * used one
+ */
+static int snd_echo_preallocate_pages(struct snd_pcm *pcm, struct device *dev)
+{
+ struct snd_pcm_substream *ss;
+ int stream, err;
+
+ for (stream = 0; stream < 2; stream++)
+ for (ss = pcm->streams[stream].substream; ss; ss = ss->next) {
+ err = snd_pcm_lib_preallocate_pages(ss, SNDRV_DMA_TYPE_DEV_SG,
+ dev,
+ ss->number ? 0 : 128<<10,
+ 256<<10);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+
+
+/*<--snd_echo_probe() */
+static int __devinit snd_echo_new_pcm(struct echoaudio *chip)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+#ifdef ECHOCARD_HAS_VMIXER
+ /* This card has a Vmixer, that is there is no direct mapping from PCM
+ streams to physical outputs. The user can mix the streams as he wishes
+ via control interface and it's possible to send any stream to any
+ output, thus it makes no sense to keep analog and digital outputs
+ separated */
+
+ /* PCM#0 Virtual outputs and analog inputs */
+ if ((err = snd_pcm_new(chip->card, "PCM", 0, num_pipes_out(chip),
+ num_analog_busses_in(chip), &pcm)) < 0)
+ return err;
+ pcm->private_data = chip;
+ chip->analog_pcm = pcm;
+ strcpy(pcm->name, chip->card->shortname);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &analog_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &analog_capture_ops);
+ if ((err = snd_echo_preallocate_pages(pcm, snd_dma_pci_data(chip->pci))) < 0)
+ return err;
+ DE_INIT(("Analog PCM ok\n"));
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+ /* PCM#1 Digital inputs, no outputs */
+ if ((err = snd_pcm_new(chip->card, "Digital PCM", 1, 0,
+ num_digital_busses_in(chip), &pcm)) < 0)
+ return err;
+ pcm->private_data = chip;
+ chip->digital_pcm = pcm;
+ strcpy(pcm->name, chip->card->shortname);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &digital_capture_ops);
+ if ((err = snd_echo_preallocate_pages(pcm, snd_dma_pci_data(chip->pci))) < 0)
+ return err;
+ DE_INIT(("Digital PCM ok\n"));
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+#else /* ECHOCARD_HAS_VMIXER */
+
+ /* The card can manage substreams formed by analog and digital channels
+ at the same time, but I prefer to keep analog and digital channels
+ separated, because that mixed thing is confusing and useless. So we
+ register two PCM devices: */
+
+ /* PCM#0 Analog i/o */
+ if ((err = snd_pcm_new(chip->card, "Analog PCM", 0,
+ num_analog_busses_out(chip),
+ num_analog_busses_in(chip), &pcm)) < 0)
+ return err;
+ pcm->private_data = chip;
+ chip->analog_pcm = pcm;
+ strcpy(pcm->name, chip->card->shortname);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &analog_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &analog_capture_ops);
+ if ((err = snd_echo_preallocate_pages(pcm, snd_dma_pci_data(chip->pci))) < 0)
+ return err;
+ DE_INIT(("Analog PCM ok\n"));
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+ /* PCM#1 Digital i/o */
+ if ((err = snd_pcm_new(chip->card, "Digital PCM", 1,
+ num_digital_busses_out(chip),
+ num_digital_busses_in(chip), &pcm)) < 0)
+ return err;
+ pcm->private_data = chip;
+ chip->digital_pcm = pcm;
+ strcpy(pcm->name, chip->card->shortname);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &digital_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &digital_capture_ops);
+ if ((err = snd_echo_preallocate_pages(pcm, snd_dma_pci_data(chip->pci))) < 0)
+ return err;
+ DE_INIT(("Digital PCM ok\n"));
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+#endif /* ECHOCARD_HAS_VMIXER */
+
+ return 0;
+}
+
+
+
+
+/******************************************************************************
+ Control interface
+******************************************************************************/
+
+/******************* PCM output volume *******************/
+static int snd_echo_output_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = num_busses_out(chip);
+ uinfo->value.integer.min = ECHOGAIN_MINOUT;
+ uinfo->value.integer.max = ECHOGAIN_MAXOUT;
+ return 0;
+}
+
+static int snd_echo_output_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ for (c = 0; c < num_busses_out(chip); c++)
+ ucontrol->value.integer.value[c] = chip->output_gain[c];
+ return 0;
+}
+
+static int snd_echo_output_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c, changed, gain;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ spin_lock_irq(&chip->lock);
+ for (c = 0; c < num_busses_out(chip); c++) {
+ gain = ucontrol->value.integer.value[c];
+ /* Ignore out of range values */
+ if (gain < ECHOGAIN_MINOUT || gain > ECHOGAIN_MAXOUT)
+ continue;
+ if (chip->output_gain[c] != gain) {
+ set_output_gain(chip, c, gain);
+ changed = 1;
+ }
+ }
+ if (changed)
+ update_output_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ return changed;
+}
+
+#ifdef ECHOCARD_HAS_VMIXER
+/* On Vmixer cards this one controls the line-out volume */
+static struct snd_kcontrol_new snd_echo_line_output_gain __devinitdata = {
+ .name = "Line Playback Volume",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_output_gain_info,
+ .get = snd_echo_output_gain_get,
+ .put = snd_echo_output_gain_put,
+};
+#else
+static struct snd_kcontrol_new snd_echo_pcm_output_gain __devinitdata = {
+ .name = "PCM Playback Volume",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_output_gain_info,
+ .get = snd_echo_output_gain_get,
+ .put = snd_echo_output_gain_put,
+};
+#endif
+
+
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+
+/******************* Analog input volume *******************/
+static int snd_echo_input_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = num_analog_busses_in(chip);
+ uinfo->value.integer.min = ECHOGAIN_MININP;
+ uinfo->value.integer.max = ECHOGAIN_MAXINP;
+ return 0;
+}
+
+static int snd_echo_input_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ for (c = 0; c < num_analog_busses_in(chip); c++)
+ ucontrol->value.integer.value[c] = chip->input_gain[c];
+ return 0;
+}
+
+static int snd_echo_input_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c, gain, changed;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ spin_lock_irq(&chip->lock);
+ for (c = 0; c < num_analog_busses_in(chip); c++) {
+ gain = ucontrol->value.integer.value[c];
+ /* Ignore out of range values */
+ if (gain < ECHOGAIN_MININP || gain > ECHOGAIN_MAXINP)
+ continue;
+ if (chip->input_gain[c] != gain) {
+ set_input_gain(chip, c, gain);
+ changed = 1;
+ }
+ }
+ if (changed)
+ update_input_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_line_input_gain __devinitdata = {
+ .name = "Line Capture Volume",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_input_gain_info,
+ .get = snd_echo_input_gain_get,
+ .put = snd_echo_input_gain_put,
+};
+
+#endif /* ECHOCARD_HAS_INPUT_GAIN */
+
+
+
+#ifdef ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+
+/************ Analog output nominal level (+4dBu / -10dBV) ***************/
+static int snd_echo_output_nominal_info (struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = num_analog_busses_out(chip);
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int snd_echo_output_nominal_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ for (c = 0; c < num_analog_busses_out(chip); c++)
+ ucontrol->value.integer.value[c] = chip->nominal_level[c];
+ return 0;
+}
+
+static int snd_echo_output_nominal_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c, changed;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ spin_lock_irq(&chip->lock);
+ for (c = 0; c < num_analog_busses_out(chip); c++) {
+ if (chip->nominal_level[c] != ucontrol->value.integer.value[c]) {
+ set_nominal_level(chip, c,
+ ucontrol->value.integer.value[c]);
+ changed = 1;
+ }
+ }
+ if (changed)
+ update_output_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_output_nominal_level __devinitdata = {
+ .name = "Line Playback Switch (-10dBV)",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_output_nominal_info,
+ .get = snd_echo_output_nominal_get,
+ .put = snd_echo_output_nominal_put,
+};
+
+#endif /* ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL */
+
+
+
+#ifdef ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+
+/*************** Analog input nominal level (+4dBu / -10dBV) ***************/
+static int snd_echo_input_nominal_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = num_analog_busses_in(chip);
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int snd_echo_input_nominal_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ for (c = 0; c < num_analog_busses_in(chip); c++)
+ ucontrol->value.integer.value[c] =
+ chip->nominal_level[bx_analog_in(chip) + c];
+ return 0;
+}
+
+static int snd_echo_input_nominal_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int c, changed;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ spin_lock_irq(&chip->lock);
+ for (c = 0; c < num_analog_busses_in(chip); c++) {
+ if (chip->nominal_level[bx_analog_in(chip) + c] !=
+ ucontrol->value.integer.value[c]) {
+ set_nominal_level(chip, bx_analog_in(chip) + c,
+ ucontrol->value.integer.value[c]);
+ changed = 1;
+ }
+ }
+ if (changed)
+ update_output_line_level(chip); /* "Output" is not a mistake
+ * here.
+ */
+ spin_unlock_irq(&chip->lock);
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_intput_nominal_level __devinitdata = {
+ .name = "Line Capture Switch (-10dBV)",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_input_nominal_info,
+ .get = snd_echo_input_nominal_get,
+ .put = snd_echo_input_nominal_put,
+};
+
+#endif /* ECHOCARD_HAS_INPUT_NOMINAL_LEVEL */
+
+
+
+#ifdef ECHOCARD_HAS_MONITOR
+
+/******************* Monitor mixer *******************/
+static int snd_echo_mixer_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = ECHOGAIN_MINOUT;
+ uinfo->value.integer.max = ECHOGAIN_MAXOUT;
+ uinfo->dimen.d[0] = num_busses_out(chip);
+ uinfo->dimen.d[1] = num_busses_in(chip);
+ return 0;
+}
+
+static int snd_echo_mixer_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] =
+ chip->monitor_gain[ucontrol->id.index / num_busses_in(chip)]
+ [ucontrol->id.index % num_busses_in(chip)];
+ return 0;
+}
+
+static int snd_echo_mixer_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int changed, gain;
+ short out, in;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ out = ucontrol->id.index / num_busses_in(chip);
+ in = ucontrol->id.index % num_busses_in(chip);
+ gain = ucontrol->value.integer.value[0];
+ if (gain < ECHOGAIN_MINOUT || gain > ECHOGAIN_MAXOUT)
+ return -EINVAL;
+ if (chip->monitor_gain[out][in] != gain) {
+ spin_lock_irq(&chip->lock);
+ set_monitor_gain(chip, out, in, gain);
+ update_output_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ changed = 1;
+ }
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_monitor_mixer __devinitdata = {
+ .name = "Monitor Mixer Volume",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_mixer_info,
+ .get = snd_echo_mixer_get,
+ .put = snd_echo_mixer_put,
+};
+
+#endif /* ECHOCARD_HAS_MONITOR */
+
+
+
+#ifdef ECHOCARD_HAS_VMIXER
+
+/******************* Vmixer *******************/
+static int snd_echo_vmixer_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = ECHOGAIN_MINOUT;
+ uinfo->value.integer.max = ECHOGAIN_MAXOUT;
+ uinfo->dimen.d[0] = num_busses_out(chip);
+ uinfo->dimen.d[1] = num_pipes_out(chip);
+ return 0;
+}
+
+static int snd_echo_vmixer_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] =
+ chip->vmixer_gain[ucontrol->id.index / num_pipes_out(chip)]
+ [ucontrol->id.index % num_pipes_out(chip)];
+ return 0;
+}
+
+static int snd_echo_vmixer_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int gain, changed;
+ short vch, out;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ out = ucontrol->id.index / num_pipes_out(chip);
+ vch = ucontrol->id.index % num_pipes_out(chip);
+ gain = ucontrol->value.integer.value[0];
+ if (gain < ECHOGAIN_MINOUT || gain > ECHOGAIN_MAXOUT)
+ return -EINVAL;
+ if (chip->vmixer_gain[out][vch] != ucontrol->value.integer.value[0]) {
+ spin_lock_irq(&chip->lock);
+ set_vmixer_gain(chip, out, vch, ucontrol->value.integer.value[0]);
+ update_vmixer_level(chip);
+ spin_unlock_irq(&chip->lock);
+ changed = 1;
+ }
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_vmixer __devinitdata = {
+ .name = "VMixer Volume",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .info = snd_echo_vmixer_info,
+ .get = snd_echo_vmixer_get,
+ .put = snd_echo_vmixer_put,
+};
+
+#endif /* ECHOCARD_HAS_VMIXER */
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+
+/******************* Digital mode switch *******************/
+static int snd_echo_digital_mode_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *names[4] = {
+ "S/PDIF Coaxial", "S/PDIF Optical", "ADAT Optical",
+ "S/PDIF Cdrom"
+ };
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->value.enumerated.items = chip->num_digital_modes;
+ uinfo->count = 1;
+ if (uinfo->value.enumerated.item >= chip->num_digital_modes)
+ uinfo->value.enumerated.item = chip->num_digital_modes - 1;
+ strcpy(uinfo->value.enumerated.name, names[
+ chip->digital_mode_list[uinfo->value.enumerated.item]]);
+ return 0;
+}
+
+static int snd_echo_digital_mode_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int i, mode;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ mode = chip->digital_mode;
+ for (i = chip->num_digital_modes - 1; i >= 0; i--)
+ if (mode == chip->digital_mode_list[i]) {
+ ucontrol->value.enumerated.item[0] = i;
+ break;
+ }
+ return 0;
+}
+
+static int snd_echo_digital_mode_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int changed;
+ unsigned short emode, dmode;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+
+ emode = ucontrol->value.enumerated.item[0];
+ if (emode >= chip->num_digital_modes)
+ return -EINVAL;
+ dmode = chip->digital_mode_list[emode];
+
+ if (dmode != chip->digital_mode) {
+ /* mode_mutex is required to make this operation atomic wrt
+ pcm_digital_*_open() and set_input_clock() functions. */
+ down(&chip->mode_mutex);
+
+ /* Do not allow the user to change the digital mode when a pcm
+ device is open because it also changes the number of channels
+ and the allowed sample rates */
+ if (atomic_read(&chip->opencount)) {
+ changed = -EAGAIN;
+ } else {
+ changed = set_digital_mode(chip, dmode);
+ /* If we had to change the clock source, report it */
+ if (changed > 0 && chip->clock_src_ctl) {
+ snd_ctl_notify(chip->card,
+ SNDRV_CTL_EVENT_MASK_VALUE,
+ &chip->clock_src_ctl->id);
+ DE_ACT(("SDM() =%d\n", changed));
+ }
+ if (changed >= 0)
+ changed = 1; /* No errors */
+ }
+ up(&chip->mode_mutex);
+ }
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_digital_mode_switch __devinitdata = {
+ .name = "Digital mode Switch",
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .info = snd_echo_digital_mode_info,
+ .get = snd_echo_digital_mode_get,
+ .put = snd_echo_digital_mode_put,
+};
+
+#endif /* ECHOCARD_HAS_DIGITAL_MODE_SWITCH */
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+
+/******************* S/PDIF mode switch *******************/
+static int snd_echo_spdif_mode_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *names[2] = {"Consumer", "Professional"};
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->value.enumerated.items = 2;
+ uinfo->count = 1;
+ if (uinfo->value.enumerated.item)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ names[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int snd_echo_spdif_mode_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.enumerated.item[0] = !!chip->professional_spdif;
+ return 0;
+}
+
+static int snd_echo_spdif_mode_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int mode;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ mode = !!ucontrol->value.enumerated.item[0];
+ if (mode != chip->professional_spdif) {
+ spin_lock_irq(&chip->lock);
+ set_professional_spdif(chip, mode);
+ spin_unlock_irq(&chip->lock);
+ return 1;
+ }
+ return 0;
+}
+
+static struct snd_kcontrol_new snd_echo_spdif_mode_switch __devinitdata = {
+ .name = "S/PDIF mode Switch",
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .info = snd_echo_spdif_mode_info,
+ .get = snd_echo_spdif_mode_get,
+ .put = snd_echo_spdif_mode_put,
+};
+
+#endif /* ECHOCARD_HAS_DIGITAL_IO */
+
+
+
+#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+
+/******************* Select input clock source *******************/
+static int snd_echo_clock_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *names[8] = {
+ "Internal", "Word", "Super", "S/PDIF", "ADAT", "ESync",
+ "ESync96", "MTC"
+ };
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->value.enumerated.items = chip->num_clock_sources;
+ uinfo->count = 1;
+ if (uinfo->value.enumerated.item >= chip->num_clock_sources)
+ uinfo->value.enumerated.item = chip->num_clock_sources - 1;
+ strcpy(uinfo->value.enumerated.name, names[
+ chip->clock_source_list[uinfo->value.enumerated.item]]);
+ return 0;
+}
+
+static int snd_echo_clock_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int i, clock;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ clock = chip->input_clock;
+
+ for (i = 0; i < chip->num_clock_sources; i++)
+ if (clock == chip->clock_source_list[i])
+ ucontrol->value.enumerated.item[0] = i;
+
+ return 0;
+}
+
+static int snd_echo_clock_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int changed;
+ unsigned int eclock, dclock;
+
+ changed = 0;
+ chip = snd_kcontrol_chip(kcontrol);
+ eclock = ucontrol->value.enumerated.item[0];
+ if (eclock >= chip->input_clock_types)
+ return -EINVAL;
+ dclock = chip->clock_source_list[eclock];
+ if (chip->input_clock != dclock) {
+ down(&chip->mode_mutex);
+ spin_lock_irq(&chip->lock);
+ if ((changed = set_input_clock(chip, dclock)) == 0)
+ changed = 1; /* no errors */
+ spin_unlock_irq(&chip->lock);
+ up(&chip->mode_mutex);
+ }
+
+ if (changed < 0)
+ DE_ACT(("seticlk val%d err 0x%x\n", dclock, changed));
+
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_clock_source_switch __devinitdata = {
+ .name = "Sample Clock Source",
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .info = snd_echo_clock_source_info,
+ .get = snd_echo_clock_source_get,
+ .put = snd_echo_clock_source_put,
+};
+
+#endif /* ECHOCARD_HAS_EXTERNAL_CLOCK */
+
+
+
+#ifdef ECHOCARD_HAS_PHANTOM_POWER
+
+/******************* Phantom power switch *******************/
+static int snd_echo_phantom_power_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int snd_echo_phantom_power_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = chip->phantom_power;
+ return 0;
+}
+
+static int snd_echo_phantom_power_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+ int power, changed = 0;
+
+ power = !!ucontrol->value.integer.value[0];
+ if (chip->phantom_power != power) {
+ spin_lock_irq(&chip->lock);
+ changed = set_phantom_power(chip, power);
+ spin_unlock_irq(&chip->lock);
+ if (changed == 0)
+ changed = 1; /* no errors */
+ }
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_phantom_power_switch __devinitdata = {
+ .name = "Phantom power Switch",
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .info = snd_echo_phantom_power_info,
+ .get = snd_echo_phantom_power_get,
+ .put = snd_echo_phantom_power_put,
+};
+
+#endif /* ECHOCARD_HAS_PHANTOM_POWER */
+
+
+
+#ifdef ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+
+/******************* Digital input automute switch *******************/
+static int snd_echo_automute_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int snd_echo_automute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.integer.value[0] = chip->digital_in_automute;
+ return 0;
+}
+
+static int snd_echo_automute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip = snd_kcontrol_chip(kcontrol);
+ int automute, changed = 0;
+
+ automute = !!ucontrol->value.integer.value[0];
+ if (chip->digital_in_automute != automute) {
+ spin_lock_irq(&chip->lock);
+ changed = set_input_auto_mute(chip, automute);
+ spin_unlock_irq(&chip->lock);
+ if (changed == 0)
+ changed = 1; /* no errors */
+ }
+ return changed;
+}
+
+static struct snd_kcontrol_new snd_echo_automute_switch __devinitdata = {
+ .name = "Digital Capture Switch (automute)",
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .info = snd_echo_automute_info,
+ .get = snd_echo_automute_get,
+ .put = snd_echo_automute_put,
+};
+
+#endif /* ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE */
+
+
+
+/******************* VU-meters switch *******************/
+static int snd_echo_vumeters_switch_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int snd_echo_vumeters_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ spin_lock_irq(&chip->lock);
+ set_meters_on(chip, ucontrol->value.integer.value[0]);
+ spin_unlock_irq(&chip->lock);
+ return 1;
+}
+
+static struct snd_kcontrol_new snd_echo_vumeters_switch __devinitdata = {
+ .name = "VU-meters Switch",
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_WRITE,
+ .info = snd_echo_vumeters_switch_info,
+ .put = snd_echo_vumeters_switch_put,
+};
+
+
+
+/***** Read VU-meters (input, output, analog and digital together) *****/
+static int snd_echo_vumeters_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 96;
+ uinfo->value.integer.min = ECHOGAIN_MINOUT;
+ uinfo->value.integer.max = 0;
+#ifdef ECHOCARD_HAS_VMIXER
+ uinfo->dimen.d[0] = 3; /* Out, In, Virt */
+#else
+ uinfo->dimen.d[0] = 2; /* Out, In */
+#endif
+ uinfo->dimen.d[1] = 16; /* 16 channels */
+ uinfo->dimen.d[2] = 2; /* 0=level, 1=peak */
+ return 0;
+}
+
+static int snd_echo_vumeters_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ get_audio_meters(chip, ucontrol->value.integer.value);
+ return 0;
+}
+
+static struct snd_kcontrol_new snd_echo_vumeters __devinitdata = {
+ .name = "VU-meters",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_echo_vumeters_info,
+ .get = snd_echo_vumeters_get,
+};
+
+
+
+/*** Channels info - it exports informations about the number of channels ***/
+static int snd_echo_channels_info_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct echoaudio *chip;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 6;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1 << ECHO_CLOCK_NUMBER;
+ return 0;
+}
+
+static int snd_echo_channels_info_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct echoaudio *chip;
+ int detected, clocks, bit, src;
+
+ chip = snd_kcontrol_chip(kcontrol);
+ ucontrol->value.integer.value[0] = num_busses_in(chip);
+ ucontrol->value.integer.value[1] = num_analog_busses_in(chip);
+ ucontrol->value.integer.value[2] = num_busses_out(chip);
+ ucontrol->value.integer.value[3] = num_analog_busses_out(chip);
+ ucontrol->value.integer.value[4] = num_pipes_out(chip);
+
+ /* Compute the bitmask of the currently valid input clocks */
+ detected = detect_input_clocks(chip);
+ clocks = 0;
+ src = chip->num_clock_sources - 1;
+ for (bit = ECHO_CLOCK_NUMBER - 1; bit >= 0; bit--)
+ if (detected & (1 << bit))
+ for (; src >= 0; src--)
+ if (bit == chip->clock_source_list[src]) {
+ clocks |= 1 << src;
+ break;
+ }
+ ucontrol->value.integer.value[5] = clocks;
+
+ return 0;
+}
+
+static struct snd_kcontrol_new snd_echo_channels_info __devinitdata = {
+ .name = "Channels info",
+ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_echo_channels_info_info,
+ .get = snd_echo_channels_info_get,
+};
+
+
+
+
+/******************************************************************************
+ IRQ Handler
+******************************************************************************/
+
+static irqreturn_t snd_echo_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct echoaudio *chip = dev_id;
+ struct snd_pcm_substream *substream;
+ int period, ss, st;
+
+ spin_lock(&chip->lock);
+ st = service_irq(chip);
+ if (st < 0) {
+ spin_unlock(&chip->lock);
+ return IRQ_NONE;
+ }
+ /* The hardware doesn't tell us which substream caused the irq,
+ thus we have to check all running substreams. */
+ for (ss = 0; ss < DSP_MAXPIPES; ss++) {
+ if ((substream = chip->substream[ss])) {
+ period = pcm_pointer(substream) /
+ substream->runtime->period_size;
+ if (period != chip->last_period[ss]) {
+ chip->last_period[ss] = period;
+ spin_unlock(&chip->lock);
+ snd_pcm_period_elapsed(substream);
+ spin_lock(&chip->lock);
+ }
+ }
+ }
+ spin_unlock(&chip->lock);
+
+#ifdef ECHOCARD_HAS_MIDI
+ if (st > 0 && chip->midi_in) {
+ snd_rawmidi_receive(chip->midi_in, chip->midi_buffer, st);
+ DE_MID(("rawmidi_iread=%d\n", st));
+ }
+#endif
+ return IRQ_HANDLED;
+}
+
+
+
+
+/******************************************************************************
+ Module construction / destruction
+******************************************************************************/
+
+static int snd_echo_free(struct echoaudio *chip)
+{
+ DE_INIT(("Stop DSP...\n"));
+ if (chip->comm_page) {
+ rest_in_peace(chip);
+ snd_dma_free_pages(&chip->commpage_dma_buf);
+ }
+ DE_INIT(("Stopped.\n"));
+
+ if (chip->irq >= 0)
+ free_irq(chip->irq, (void *)chip);
+
+ if (chip->dsp_registers)
+ iounmap(chip->dsp_registers);
+
+ if (chip->iores) {
+ release_resource(chip->iores);
+ kfree_nocheck(chip->iores);
+ }
+ DE_INIT(("MMIO freed.\n"));
+
+ pci_disable_device(chip->pci);
+
+ /* release chip data */
+ kfree(chip);
+ DE_INIT(("Chip freed.\n"));
+ return 0;
+}
+
+
+
+static int snd_echo_dev_free(struct snd_device *device)
+{
+ struct echoaudio *chip = device->device_data;
+
+ DE_INIT(("snd_echo_dev_free()...\n"));
+ return snd_echo_free(chip);
+}
+
+
+
+/* <--snd_echo_probe() */
+static __devinit int snd_echo_create(struct snd_card *card,
+ struct pci_dev *pci,
+ struct echoaudio **rchip)
+{
+ struct echoaudio *chip;
+ int err;
+ size_t sz;
+ static struct snd_device_ops ops = {
+ .dev_free = snd_echo_dev_free,
+ };
+
+ *rchip = NULL;
+
+ pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0xC0);
+
+ if ((err = pci_enable_device(pci)) < 0)
+ return err;
+ pci_set_master(pci);
+
+ /* allocate a chip-specific data */
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip) {
+ pci_disable_device(pci);
+ return -ENOMEM;
+ }
+ DE_INIT(("chip=%p\n", chip));
+
+ spin_lock_init(&chip->lock);
+ chip->card = card;
+ chip->pci = pci;
+ chip->irq = -1;
+
+ /* PCI resource allocation */
+ chip->dsp_registers_phys = pci_resource_start(pci, 0);
+ sz = pci_resource_len(pci, 0);
+ if (sz > PAGE_SIZE)
+ sz = PAGE_SIZE; /* We map only the required part */
+
+ if ((chip->iores = request_mem_region(chip->dsp_registers_phys, sz,
+ ECHOCARD_NAME)) == NULL) {
+ snd_echo_free(chip);
+ snd_printk(KERN_ERR "cannot get memory region\n");
+ return -EBUSY;
+ }
+ chip->dsp_registers = (volatile u32 __iomem *)
+ ioremap_nocache(chip->dsp_registers_phys, sz);
+
+ if (request_irq(pci->irq, snd_echo_interrupt, SA_INTERRUPT | SA_SHIRQ,
+ ECHOCARD_NAME, (void *)chip)) {
+ snd_echo_free(chip);
+ snd_printk(KERN_ERR "cannot grab irq\n");
+ return -EBUSY;
+ }
+ chip->irq = pci->irq;
+ DE_INIT(("pci=%p irq=%d subdev=%04x Init hardware...\n",
+ chip->pci, chip->irq, chip->pci->subsystem_device));
+
+ /* Create the DSP comm page - this is the area of memory used for most
+ of the communication with the DSP, which accesses it via bus mastering */
+ if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci),
+ sizeof(struct comm_page),
+ &chip->commpage_dma_buf) < 0) {
+ snd_echo_free(chip);
+ snd_printk(KERN_ERR "cannot allocate the comm page\n");
+ return -ENOMEM;
+ }
+ chip->comm_page_phys = chip->commpage_dma_buf.addr;
+ chip->comm_page = (struct comm_page *)chip->commpage_dma_buf.area;
+
+ err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device);
+ if (err) {
+ DE_INIT(("init_hw err=%d\n", err));
+ snd_echo_free(chip);
+ return err;
+ }
+ DE_INIT(("Card init OK\n"));
+
+ if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
+ snd_echo_free(chip);
+ return err;
+ }
+ atomic_set(&chip->opencount, 0);
+ init_MUTEX(&chip->mode_mutex);
+ chip->can_set_rate = 1;
+ *rchip = chip;
+ /* Init done ! */
+ return 0;
+}
+
+
+
+/* constructor */
+static int __devinit snd_echo_probe(struct pci_dev *pci,
+ const struct pci_device_id *pci_id)
+{
+ static int dev;
+ struct snd_card *card;
+ struct echoaudio *chip;
+ char *dsp;
+ int i, err;
+
+ if (dev >= SNDRV_CARDS)
+ return -ENODEV;
+ if (!enable[dev]) {
+ dev++;
+ return -ENOENT;
+ }
+
+ DE_INIT(("Echoaudio driver starting...\n"));
+ i = 0;
+ card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ if ((err = snd_echo_create(card, pci, &chip)) < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "Echo_" ECHOCARD_NAME);
+ strcpy(card->shortname, chip->card_name);
+
+ dsp = "56301";
+ if (pci_id->device == 0x3410)
+ dsp = "56361";
+
+ sprintf(card->longname, "%s rev.%d (DSP%s) at 0x%lx irq %i",
+ card->shortname, pci_id->subdevice & 0x000f, dsp,
+ chip->dsp_registers_phys, chip->irq);
+
+ if ((err = snd_echo_new_pcm(chip)) < 0) {
+ snd_printk(KERN_ERR "new pcm error %d\n", err);
+ snd_card_free(card);
+ return err;
+ }
+
+#ifdef ECHOCARD_HAS_MIDI
+ if (chip->has_midi) { /* Some Mia's do not have midi */
+ if ((err = snd_echo_midi_create(card, chip)) < 0) {
+ snd_printk(KERN_ERR "new midi error %d\n", err);
+ snd_card_free(card);
+ return err;
+ }
+ }
+#endif
+
+#ifdef ECHOCARD_HAS_VMIXER
+ snd_echo_vmixer.count = num_pipes_out(chip) * num_busses_out(chip);
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_line_output_gain, chip))) < 0)
+ goto ctl_error;
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vmixer, chip))) < 0)
+ goto ctl_error;
+#else
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_pcm_output_gain, chip))) < 0)
+ goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_line_input_gain, chip))) < 0)
+ goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+ if (!chip->hasnt_input_nominal_level)
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_intput_nominal_level, chip))) < 0)
+ goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_output_nominal_level, chip))) < 0)
+ goto ctl_error;
+#endif
+
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vumeters_switch, chip))) < 0)
+ goto ctl_error;
+
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vumeters, chip))) < 0)
+ goto ctl_error;
+
+#ifdef ECHOCARD_HAS_MONITOR
+ snd_echo_monitor_mixer.count = num_busses_in(chip) * num_busses_out(chip);
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_monitor_mixer, chip))) < 0)
+ goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_automute_switch, chip))) < 0)
+ goto ctl_error;
+#endif
+
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_channels_info, chip))) < 0)
+ goto ctl_error;
+
+#ifdef ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+ /* Creates a list of available digital modes */
+ chip->num_digital_modes = 0;
+ for (i = 0; i < 6; i++)
+ if (chip->digital_modes & (1 << i))
+ chip->digital_mode_list[chip->num_digital_modes++] = i;
+
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_digital_mode_switch, chip))) < 0)
+ goto ctl_error;
+#endif /* ECHOCARD_HAS_DIGITAL_MODE_SWITCH */
+
+#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+ /* Creates a list of available clock sources */
+ chip->num_clock_sources = 0;
+ for (i = 0; i < 10; i++)
+ if (chip->input_clock_types & (1 << i))
+ chip->clock_source_list[chip->num_clock_sources++] = i;
+
+ if (chip->num_clock_sources > 1) {
+ chip->clock_src_ctl = snd_ctl_new1(&snd_echo_clock_source_switch, chip);
+ if ((err = snd_ctl_add(chip->card, chip->clock_src_ctl)) < 0)
+ goto ctl_error;
+ }
+#endif /* ECHOCARD_HAS_EXTERNAL_CLOCK */
+
+#ifdef ECHOCARD_HAS_DIGITAL_IO
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_spdif_mode_switch, chip))) < 0)
+ goto ctl_error;
+#endif
+
+#ifdef ECHOCARD_HAS_PHANTOM_POWER
+ if (chip->has_phantom_power)
+ if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_phantom_power_switch, chip))) < 0)
+ goto ctl_error;
+#endif
+
+ if ((err = snd_card_register(card)) < 0) {
+ snd_card_free(card);
+ goto ctl_error;
+ }
+ snd_printk(KERN_INFO "Card registered: %s\n", card->longname);
+
+ pci_set_drvdata(pci, chip);
+ dev++;
+ return 0;
+
+ctl_error:
+ snd_printk(KERN_ERR "new control error %d\n", err);
+ snd_card_free(card);
+ return err;
+}
+
+
+
+static void __devexit snd_echo_remove(struct pci_dev *pci)
+{
+ struct echoaudio *chip;
+
+ chip = pci_get_drvdata(pci);
+ if (chip)
+ snd_card_free(chip->card);
+ pci_set_drvdata(pci, NULL);
+}
+
+
+
+/******************************************************************************
+ Everything starts and ends here
+******************************************************************************/
+
+/* pci_driver definition */
+static struct pci_driver driver = {
+ .name = "Echoaudio " ECHOCARD_NAME,
+ .id_table = snd_echo_ids,
+ .probe = snd_echo_probe,
+ .remove = __devexit_p(snd_echo_remove),
+};
+
+
+
+/* initialization of the module */
+static int __init alsa_card_echo_init(void)
+{
+ return pci_register_driver(&driver);
+}
+
+
+
+/* clean up the module */
+static void __exit alsa_card_echo_exit(void)
+{
+ pci_unregister_driver(&driver);
+}
+
+
+module_init(alsa_card_echo_init)
+module_exit(alsa_card_echo_exit)
diff --git a/sound/pci/echoaudio/echoaudio.h b/sound/pci/echoaudio/echoaudio.h
new file mode 100644
index 0000000..7e88c96
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio.h
@@ -0,0 +1,590 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ ****************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+ ****************************************************************************
+
+
+ Here's a block diagram of how most of the cards work:
+
+ +-----------+
+ record | |<-------------------- Inputs
+ <-------| | |
+ PCI | Transport | |
+ bus | engine | \|/
+ ------->| | +-------+
+ play | |--->|monitor|-------> Outputs
+ +-----------+ | mixer |
+ +-------+
+
+ The lines going to and from the PCI bus represent "pipes". A pipe performs
+ audio transport - moving audio data to and from buffers on the host via
+ bus mastering.
+
+ The inputs and outputs on the right represent input and output "busses."
+ A bus is a physical, real connection to the outside world. An example
+ of a bus would be the 1/4" analog connectors on the back of Layla or
+ an RCA S/PDIF connector.
+
+ For most cards, there is a one-to-one correspondence between outputs
+ and busses; that is, each individual pipe is hard-wired to a single bus.
+
+ Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
+ Layla24, Mona, and Indigo.
+
+
+ Mia has a feature called "virtual outputs."
+
+
+ +-----------+
+ record | |<----------------------------- Inputs
+ <-------| | |
+ PCI | Transport | |
+ bus | engine | \|/
+ ------->| | +------+ +-------+
+ play | |-->|vmixer|-->|monitor|-------> Outputs
+ +-----------+ +------+ | mixer |
+ +-------+
+
+
+ Obviously, the difference here is the box labeled "vmixer." Vmixer is
+ short for "virtual output mixer." For Mia, pipes are *not* hard-wired
+ to a single bus; the vmixer lets you mix any pipe to any bus in any
+ combination.
+
+ Note, however, that the left-hand side of the diagram is unchanged.
+ Transport works exactly the same way - the difference is in the mixer stage.
+
+
+ Pipes and busses are numbered starting at zero.
+
+
+
+ Pipe index
+ ==========
+
+ A number of calls in CEchoGals refer to a "pipe index". A pipe index is
+ a unique number for a pipe that unambiguously refers to a playback or record
+ pipe. Pipe indices are numbered starting with analog outputs, followed by
+ digital outputs, then analog inputs, then digital inputs.
+
+ Take Gina24 as an example:
+
+ Pipe index
+
+ 0-7 Analog outputs (0 .. FirstDigitalBusOut-1)
+ 8-15 Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
+ 16-17 Analog inputs
+ 18-25 Digital inputs
+
+
+ You get the pipe index by calling CEchoGals::OpenAudio; the other transport
+ functions take the pipe index as a parameter. If you need a pipe index for
+ some other reason, use the handy Makepipe_index method.
+
+
+ Some calls take a CChannelMask parameter; CChannelMask is a handy way to
+ group pipe indices.
+
+
+
+ Digital mode switch
+ ===================
+
+ Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
+ or DMS. Cards with a DMS can be set to one of three mutually exclusive
+ digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
+
+ This may create some confusion since ADAT optical is 8 channels wide and
+ S/PDIF is only two channels wide. Gina24, Layla24, and Mona handle this
+ by acting as if they always have 8 digital outs and ins. If you are in
+ either S/PDIF mode, the last 6 channels don't do anything - data sent
+ out these channels is thrown away and you will always record zeros.
+
+ Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
+ only available if you have the card configured for S/PDIF optical or S/PDIF
+ RCA.
+
+
+
+ Double speed mode
+ =================
+
+ Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
+ Layla24, Mona, Mia, and Indigo). For these cards, the driver sometimes has
+ to worry about "double speed mode"; double speed mode applies whenever the
+ sampling rate is above 50 kHz.
+
+ For instance, Mona and Layla24 support word clock sync. However, they
+ actually support two different word clock modes - single speed (below
+ 50 kHz) and double speed (above 50 kHz). The hardware detects if a single
+ or double speed word clock signal is present; the generic code uses that
+ information to determine which mode to use.
+
+ The generic code takes care of all this for you.
+*/
+
+
+#ifndef _ECHOAUDIO_H_
+#define _ECHOAUDIO_H_
+
+
+#define TRUE 1
+#define FALSE 0
+
+#include "echoaudio_dsp.h"
+
+
+
+/***********************************************************************
+
+ PCI configuration space
+
+***********************************************************************/
+
+/*
+ * PCI vendor ID and device IDs for the hardware
+ */
+#define VENDOR_ID 0x1057
+#define DEVICE_ID_56301 0x1801
+#define DEVICE_ID_56361 0x3410
+#define SUBVENDOR_ID 0xECC0
+
+
+/*
+ * Valid Echo PCI subsystem card IDs
+ */
+#define DARLA20 0x0010
+#define GINA20 0x0020
+#define LAYLA20 0x0030
+#define DARLA24 0x0040
+#define GINA24 0x0050
+#define LAYLA24 0x0060
+#define MONA 0x0070
+#define MIA 0x0080
+#define INDIGO 0x0090
+#define INDIGO_IO 0x00a0
+#define INDIGO_DJ 0x00b0
+#define ECHO3G 0x0100
+
+
+/************************************************************************
+
+ Array sizes and so forth
+
+***********************************************************************/
+
+/*
+ * Sizes
+ */
+#define ECHO_MAXAUDIOINPUTS 32 /* Max audio input channels */
+#define ECHO_MAXAUDIOOUTPUTS 32 /* Max audio output channels */
+#define ECHO_MAXAUDIOPIPES 32 /* Max number of input and output
+ * pipes */
+#define E3G_MAX_OUTPUTS 16
+#define ECHO_MAXMIDIJACKS 1 /* Max MIDI ports */
+#define ECHO_MIDI_QUEUE_SZ 512 /* Max MIDI input queue entries */
+#define ECHO_MTC_QUEUE_SZ 32 /* Max MIDI time code input queue
+ * entries */
+
+/*
+ * MIDI activity indicator timeout
+ */
+#define MIDI_ACTIVITY_TIMEOUT_USEC 200000
+
+
+/****************************************************************************
+
+ Clocks
+
+*****************************************************************************/
+
+/*
+ * Clock numbers
+ */
+#define ECHO_CLOCK_INTERNAL 0
+#define ECHO_CLOCK_WORD 1
+#define ECHO_CLOCK_SUPER 2
+#define ECHO_CLOCK_SPDIF 3
+#define ECHO_CLOCK_ADAT 4
+#define ECHO_CLOCK_ESYNC 5
+#define ECHO_CLOCK_ESYNC96 6
+#define ECHO_CLOCK_MTC 7
+#define ECHO_CLOCK_NUMBER 8
+#define ECHO_CLOCKS 0xffff
+
+/*
+ * Clock bit numbers - used to report capabilities and whatever clocks
+ * are being detected dynamically.
+ */
+#define ECHO_CLOCK_BIT_INTERNAL (1 << ECHO_CLOCK_INTERNAL)
+#define ECHO_CLOCK_BIT_WORD (1 << ECHO_CLOCK_WORD)
+#define ECHO_CLOCK_BIT_SUPER (1 << ECHO_CLOCK_SUPER)
+#define ECHO_CLOCK_BIT_SPDIF (1 << ECHO_CLOCK_SPDIF)
+#define ECHO_CLOCK_BIT_ADAT (1 << ECHO_CLOCK_ADAT)
+#define ECHO_CLOCK_BIT_ESYNC (1 << ECHO_CLOCK_ESYNC)
+#define ECHO_CLOCK_BIT_ESYNC96 (1 << ECHO_CLOCK_ESYNC96)
+#define ECHO_CLOCK_BIT_MTC (1<<ECHO_CLOCK_MTC)
+
+
+/***************************************************************************
+
+ Digital modes
+
+****************************************************************************/
+
+/*
+ * Digital modes for Mona, Layla24, and Gina24
+ */
+#define DIGITAL_MODE_NONE 0xFF
+#define DIGITAL_MODE_SPDIF_RCA 0
+#define DIGITAL_MODE_SPDIF_OPTICAL 1
+#define DIGITAL_MODE_ADAT 2
+#define DIGITAL_MODE_SPDIF_CDROM 3
+#define DIGITAL_MODES 4
+
+/*
+ * Digital mode capability masks
+ */
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA (1 << DIGITAL_MODE_SPDIF_RCA)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL)
+#define ECHOCAPS_HAS_DIGITAL_MODE_ADAT (1 << DIGITAL_MODE_ADAT)
+#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM (1 << DIGITAL_MODE_SPDIF_CDROM)
+
+
+#define EXT_3GBOX_NC 0x01 /* 3G box not connected */
+#define EXT_3GBOX_NOT_SET 0x02 /* 3G box not detected yet */
+
+
+#define ECHOGAIN_MUTED (-128) /* Minimum possible gain */
+#define ECHOGAIN_MINOUT (-128) /* Min output gain (dB) */
+#define ECHOGAIN_MAXOUT (6) /* Max output gain (dB) */
+#define ECHOGAIN_MININP (-50) /* Min input gain (0.5 dB) */
+#define ECHOGAIN_MAXINP (50) /* Max input gain (0.5 dB) */
+
+#define PIPE_STATE_STOPPED 0 /* Pipe has been reset */
+#define PIPE_STATE_PAUSED 1 /* Pipe has been stopped */
+#define PIPE_STATE_STARTED 2 /* Pipe has been started */
+#define PIPE_STATE_PENDING 3 /* Pipe has pending start */
+
+
+/* Debug initialization */
+#ifdef CONFIG_SND_DEBUG
+#define DE_INIT(x) snd_printk x
+#else
+#define DE_INIT(x)
+#endif
+
+/* Debug hw_params callbacks */
+#ifdef CONFIG_SND_DEBUG
+#define DE_HWP(x) snd_printk x
+#else
+#define DE_HWP(x)
+#endif
+
+/* Debug normal activity (open, start, stop...) */
+#ifdef CONFIG_SND_DEBUG
+#define DE_ACT(x) snd_printk x
+#else
+#define DE_ACT(x)
+#endif
+
+/* Debug midi activity */
+#ifdef CONFIG_SND_DEBUG
+#define DE_MID(x) snd_printk x
+#else
+#define DE_MID(x)
+#endif
+
+
+struct audiopipe {
+ volatile u32 *dma_counter; /* Commpage register that contains
+ * the current dma position
+ * (lower 32 bits only)
+ */
+ u32 last_counter; /* The last position, which is used
+ * to compute...
+ */
+ u32 position; /* ...the number of bytes tranferred
+ * by the DMA engine, modulo the
+ * buffer size
+ */
+ short index; /* Index of the first channel or <0
+ * if hw is not configured yet
+ */
+ short interleave;
+ struct snd_dma_buffer sgpage; /* Room for the scatter-gather list */
+ struct snd_pcm_hardware hw;
+ struct snd_pcm_hw_constraint_list constr;
+ short sglist_head;
+ char state; /* pipe state */
+};
+
+
+struct audioformat {
+ u8 interleave; /* How the data is arranged in memory:
+ * mono = 1, stereo = 2, ...
+ */
+ u8 bits_per_sample; /* 8, 16, 24, 32 (24 bits left aligned) */
+ char mono_to_stereo; /* Only used if interleave is 1 and
+ * if this is an output pipe.
+ */
+ char data_are_bigendian; /* 1 = big endian, 0 = little endian */
+};
+
+
+struct echoaudio {
+ spinlock_t lock;
+ struct snd_pcm_substream *substream[DSP_MAXPIPES];
+ int last_period[DSP_MAXPIPES];
+ struct semaphore mode_mutex;
+ u16 num_digital_modes, digital_mode_list[6];
+ u16 num_clock_sources, clock_source_list[10];
+ atomic_t opencount;
+ struct snd_kcontrol *clock_src_ctl;
+ struct snd_pcm *analog_pcm, *digital_pcm;
+ struct snd_card *card;
+ const char *card_name;
+ struct pci_dev *pci;
+ unsigned long dsp_registers_phys;
+ struct resource *iores;
+ struct snd_dma_buffer commpage_dma_buf;
+ int irq;
+#ifdef ECHOCARD_HAS_MIDI
+ struct snd_rawmidi *rmidi;
+ struct snd_rawmidi_substream *midi_in, *midi_out;
+#endif
+ struct timer_list timer;
+ char tinuse; /* Timer in use */
+ char midi_full; /* MIDI output buffer is full */
+ char can_set_rate;
+ char rate_set;
+
+ /* This stuff is used mainly by the lowlevel code */
+ struct comm_page *comm_page; /* Virtual address of the memory
+ * seen by DSP
+ */
+ u32 pipe_alloc_mask; /* Bitmask of allocated pipes */
+ u32 pipe_cyclic_mask; /* Bitmask of pipes with cyclic
+ * buffers
+ */
+ u32 sample_rate; /* Card sample rate in Hz */
+ u8 digital_mode; /* Current digital mode
+ * (see DIGITAL_MODE_*)
+ */
+ u8 spdif_status; /* Gina20, Darla20, Darla24 - only */
+ u8 clock_state; /* Gina20, Darla20, Darla24 - only */
+ u8 input_clock; /* Currently selected sample clock
+ * source
+ */
+ u8 output_clock; /* Layla20 only */
+ char meters_enabled; /* VU-meters status */
+ char asic_loaded; /* Set TRUE when ASIC loaded */
+ char bad_board; /* Set TRUE if DSP won't load */
+ char professional_spdif; /* 0 = consumer; 1 = professional */
+ char non_audio_spdif; /* 3G - only */
+ char digital_in_automute; /* Gina24, Layla24, Mona - only */
+ char has_phantom_power;
+ char hasnt_input_nominal_level; /* Gina3G */
+ char phantom_power; /* Gina3G - only */
+ char has_midi;
+ char midi_input_enabled;
+
+#ifdef ECHOCARD_ECHO3G
+ /* External module -dependent pipe and bus indexes */
+ char px_digital_out, px_analog_in, px_digital_in, px_num;
+ char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
+#endif
+
+ char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV
+ * False == +4dBu */
+ s8 input_gain[ECHO_MAXAUDIOINPUTS]; /* Input level -50..+50
+ * unit is 0.5dB */
+ s8 output_gain[ECHO_MAXAUDIOOUTPUTS]; /* Output level -128..+6 dB
+ * (-128=muted) */
+ s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
+ /* -128..+6 dB */
+ s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
+ /* -128..+6 dB */
+
+ u16 digital_modes; /* Bitmask of supported modes
+ * (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
+ u16 input_clock_types; /* Suppoted input clock types */
+ u16 output_clock_types; /* Suppoted output clock types -
+ * Layla20 only */
+ u16 device_id, subdevice_id;
+ u16 *dsp_code; /* Current DSP code loaded,
+ * NULL if nothing loaded */
+ const struct firmware *dsp_code_to_load;/* DSP code to load */
+ const struct firmware *asic_code; /* Current ASIC code */
+ u32 comm_page_phys; /* Physical address of the
+ * memory seen by DSP */
+ volatile u32 __iomem *dsp_registers; /* DSP's register base */
+ u32 active_mask; /* Chs. active mask or
+ * punks out */
+
+#ifdef ECHOCARD_HAS_MIDI
+ u16 mtc_state; /* State for MIDI input parsing state machine */
+ u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
+#endif
+};
+
+
+static int init_dsp_comm_page(struct echoaudio *chip);
+static int init_line_levels(struct echoaudio *chip);
+static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
+static int load_firmware(struct echoaudio *chip);
+static int wait_handshake(struct echoaudio *chip);
+static int send_vector(struct echoaudio *chip, u32 command);
+static int get_firmware(const struct firmware **fw_entry,
+ const struct firmware *frm, struct echoaudio *chip);
+static void free_firmware(const struct firmware *fw_entry);
+
+#ifdef ECHOCARD_HAS_MIDI
+static int enable_midi_input(struct echoaudio *chip, char enable);
+static int midi_service_irq(struct echoaudio *chip);
+static int __devinit snd_echo_midi_create(struct snd_card *card,
+ struct echoaudio *chip);
+#endif
+
+
+static inline void clear_handshake(struct echoaudio *chip)
+{
+ chip->comm_page->handshake = 0;
+}
+
+static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
+{
+ return readl(&chip->dsp_registers[index]);
+}
+
+static inline void set_dsp_register(struct echoaudio *chip, u32 index,
+ u32 value)
+{
+ writel(value, &chip->dsp_registers[index]);
+}
+
+
+/* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
+for 3G cards because they depend on the external box. They are integer
+constants for all other cards.
+Never use those defines directly, use the following functions instead. */
+
+static inline int px_digital_out(const struct echoaudio *chip)
+{
+ return PX_DIGITAL_OUT;
+}
+
+static inline int px_analog_in(const struct echoaudio *chip)
+{
+ return PX_ANALOG_IN;
+}
+
+static inline int px_digital_in(const struct echoaudio *chip)
+{
+ return PX_DIGITAL_IN;
+}
+
+static inline int px_num(const struct echoaudio *chip)
+{
+ return PX_NUM;
+}
+
+static inline int bx_digital_out(const struct echoaudio *chip)
+{
+ return BX_DIGITAL_OUT;
+}
+
+static inline int bx_analog_in(const struct echoaudio *chip)
+{
+ return BX_ANALOG_IN;
+}
+
+static inline int bx_digital_in(const struct echoaudio *chip)
+{
+ return BX_DIGITAL_IN;
+}
+
+static inline int bx_num(const struct echoaudio *chip)
+{
+ return BX_NUM;
+}
+
+static inline int num_pipes_out(const struct echoaudio *chip)
+{
+ return px_analog_in(chip);
+}
+
+static inline int num_pipes_in(const struct echoaudio *chip)
+{
+ return px_num(chip) - px_analog_in(chip);
+}
+
+static inline int num_busses_out(const struct echoaudio *chip)
+{
+ return bx_analog_in(chip);
+}
+
+static inline int num_busses_in(const struct echoaudio *chip)
+{
+ return bx_num(chip) - bx_analog_in(chip);
+}
+
+static inline int num_analog_busses_out(const struct echoaudio *chip)
+{
+ return bx_digital_out(chip);
+}
+
+static inline int num_analog_busses_in(const struct echoaudio *chip)
+{
+ return bx_digital_in(chip) - bx_analog_in(chip);
+}
+
+static inline int num_digital_busses_out(const struct echoaudio *chip)
+{
+ return num_busses_out(chip) - num_analog_busses_out(chip);
+}
+
+static inline int num_digital_busses_in(const struct echoaudio *chip)
+{
+ return num_busses_in(chip) - num_analog_busses_in(chip);
+}
+
+/* The monitor array is a one-dimensional array; compute the offset
+ * into the array */
+static inline int monitor_index(const struct echoaudio *chip, int out, int in)
+{
+ return out * num_busses_in(chip) + in;
+}
+
+
+#ifndef pci_device
+#define pci_device(chip) (&chip->pci->dev)
+#endif
+
+
+#endif /* _ECHOAUDIO_H_ */
diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c
new file mode 100644
index 0000000..9f439ea
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_3g.c
@@ -0,0 +1,431 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+
+/* These functions are common for all "3G" cards */
+
+
+static int check_asic_status(struct echoaudio *chip)
+{
+ u32 box_status;
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->ext_box_status =
+ __constant_cpu_to_le32(E3G_ASIC_NOT_LOADED);
+ chip->asic_loaded = FALSE;
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_TEST_ASIC);
+
+ if (wait_handshake(chip)) {
+ chip->dsp_code = NULL;
+ return -EIO;
+ }
+
+ box_status = le32_to_cpu(chip->comm_page->ext_box_status);
+ DE_INIT(("box_status=%x\n", box_status));
+ if (box_status == E3G_ASIC_NOT_LOADED)
+ return -ENODEV;
+
+ chip->asic_loaded = TRUE;
+ return box_status & E3G_BOX_TYPE_MASK;
+}
+
+
+
+static inline u32 get_frq_reg(struct echoaudio *chip)
+{
+ return le32_to_cpu(chip->comm_page->e3g_frq_register);
+}
+
+
+
+/* Most configuration of 3G cards is accomplished by writing the control
+register. write_control_reg sends the new control register value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
+ char force)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+
+ DE_ACT(("WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq));
+
+ ctl = cpu_to_le32(ctl);
+ frq = cpu_to_le32(frq);
+
+ if (ctl != chip->comm_page->control_register ||
+ frq != chip->comm_page->e3g_frq_register || force) {
+ chip->comm_page->e3g_frq_register = frq;
+ chip->comm_page->control_register = ctl;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+ }
+
+ DE_ACT(("WriteControlReg: not written, no change\n"));
+ return 0;
+}
+
+
+
+/* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u8 previous_mode;
+ int err, i, o;
+
+ /* All audio channels must be closed before changing the digital mode */
+ snd_assert(!chip->pipe_alloc_mask, return -EAGAIN);
+
+ snd_assert(chip->digital_modes & (1 << mode), return -EINVAL);
+
+ previous_mode = chip->digital_mode;
+ err = dsp_set_digital_mode(chip, mode);
+
+ /* If we successfully changed the digital mode from or to ADAT,
+ * then make sure all output, input and monitor levels are
+ * updated by the DSP comm object. */
+ if (err >= 0 && previous_mode != mode &&
+ (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+ spin_lock_irq(&chip->lock);
+ for (o = 0; o < num_busses_out(chip); o++)
+ for (i = 0; i < num_busses_in(chip); i++)
+ set_monitor_gain(chip, o, i,
+ chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+ for (i = 0; i < num_busses_in(chip); i++)
+ set_input_gain(chip, i, chip->input_gain[i]);
+ update_input_line_level(chip);
+#endif
+
+ for (o = 0; o < num_busses_out(chip); o++)
+ set_output_gain(chip, o, chip->output_gain[o]);
+ update_output_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ }
+
+ return err;
+}
+
+
+
+static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate)
+{
+ control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK;
+
+ switch (rate) {
+ case 32000 :
+ control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100 :
+ if (chip->professional_spdif)
+ control_reg |= E3G_SPDIF_SAMPLE_RATE0;
+ break;
+ case 48000 :
+ control_reg |= E3G_SPDIF_SAMPLE_RATE1;
+ break;
+ }
+
+ if (chip->professional_spdif)
+ control_reg |= E3G_SPDIF_PRO_MODE;
+
+ if (chip->non_audio_spdif)
+ control_reg |= E3G_SPDIF_NOT_AUDIO;
+
+ control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL |
+ E3G_SPDIF_COPY_PERMIT;
+
+ return control_reg;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+ u32 control_reg;
+
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ chip->professional_spdif = prof;
+ control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate);
+ return write_control_reg(chip, control_reg, get_frq_reg(chip), 0);
+}
+
+
+
+/* detect_input_clocks() returns a bitmask consisting of all the input clocks
+currently connected to the hardware; this changes as the user connects and
+disconnects clock inputs. You should use this information to determine which
+clocks the user is allowed to select. */
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ * detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD)
+ clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+ switch(chip->digital_mode) {
+ case DIGITAL_MODE_SPDIF_RCA:
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT)
+ clock_bits |= ECHO_CLOCK_BIT_ADAT;
+ break;
+ }
+
+ return clock_bits;
+}
+
+
+
+static int load_asic(struct echoaudio *chip)
+{
+ int box_type, err;
+
+ if (chip->asic_loaded)
+ return 0;
+
+ /* Give the DSP a few milliseconds to settle down */
+ mdelay(2);
+
+ err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC,
+ &card_fw[FW_3G_ASIC]);
+ if (err < 0)
+ return err;
+
+ chip->asic_code = &card_fw[FW_3G_ASIC];
+
+ /* Now give the new ASIC a little time to set up */
+ mdelay(2);
+ /* See if it worked */
+ box_type = check_asic_status(chip);
+
+ /* Set up the control register if the load succeeded -
+ * 48 kHz, internal clock, S/PDIF RCA mode */
+ if (box_type >= 0) {
+ err = write_control_reg(chip, E3G_48KHZ,
+ E3G_FREQ_REG_DEFAULT, TRUE);
+ if (err < 0)
+ return err;
+ }
+
+ return box_type;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg, clock, base_rate, frq_reg;
+
+ /* Only set the clock for internal mode. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ /* Save the rate anyhow */
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ set_input_clock(chip, chip->input_clock);
+ return 0;
+ }
+
+ snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT,
+ return -EINVAL);
+
+ clock = 0;
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= E3G_CLOCK_CLEAR_MASK;
+
+ switch (rate) {
+ case 96000:
+ clock = E3G_96KHZ;
+ break;
+ case 88200:
+ clock = E3G_88KHZ;
+ break;
+ case 48000:
+ clock = E3G_48KHZ;
+ break;
+ case 44100:
+ clock = E3G_44KHZ;
+ break;
+ case 32000:
+ clock = E3G_32KHZ;
+ break;
+ default:
+ clock = E3G_CONTINUOUS_CLOCK;
+ if (rate > 50000)
+ clock |= E3G_DOUBLE_SPEED_MODE;
+ break;
+ }
+
+ control_reg |= clock;
+ control_reg = set_spdif_bits(chip, control_reg, rate);
+
+ base_rate = rate;
+ if (base_rate > 50000)
+ base_rate /= 2;
+ if (base_rate < 32000)
+ base_rate = 32000;
+
+ frq_reg = E3G_MAGIC_NUMBER / base_rate - 2;
+ if (frq_reg > E3G_FREQ_REG_MAX)
+ frq_reg = E3G_FREQ_REG_MAX;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->sample_rate = rate;
+ DE_ACT(("SetSampleRate: %d clock %x\n", rate, control_reg));
+
+ /* Tell the DSP about it - DSP reads both control reg & freq reg */
+ return write_control_reg(chip, control_reg, frq_reg, 0);
+}
+
+
+
+/* Set the sample clock source to internal, S/PDIF, ADAT */
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ u32 control_reg, clocks_from_dsp;
+
+ DE_ACT(("set_input_clock:\n"));
+
+ /* Mask off the clock select bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register) &
+ E3G_CLOCK_CLEAR_MASK;
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Echo3G clock to INTERNAL\n"));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ return set_sample_rate(chip, chip->sample_rate);
+ case ECHO_CLOCK_SPDIF:
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ DE_ACT(("Set Echo3G clock to SPDIF\n"));
+ control_reg |= E3G_SPDIF_CLOCK;
+ if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96)
+ control_reg |= E3G_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_ADAT:
+ if (chip->digital_mode != DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ DE_ACT(("Set Echo3G clock to ADAT\n"));
+ control_reg |= E3G_ADAT_CLOCK;
+ control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_WORD:
+ DE_ACT(("Set Echo3G clock to WORD\n"));
+ control_reg |= E3G_WORD_CLOCK;
+ if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96)
+ control_reg |= E3G_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~E3G_DOUBLE_SPEED_MODE;
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Echo3G\n", clock));
+ return -EINVAL;
+ }
+
+ chip->input_clock = clock;
+ return write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u32 control_reg;
+ int err, incompatible_clock;
+
+ /* Set clock to "internal" if it's not compatible with the new mode */
+ incompatible_clock = FALSE;
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ case DIGITAL_MODE_SPDIF_RCA:
+ if (chip->input_clock == ECHO_CLOCK_ADAT)
+ incompatible_clock = TRUE;
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ incompatible_clock = TRUE;
+ break;
+ default:
+ DE_ACT(("Digital mode not supported: %d\n", mode));
+ return -EINVAL;
+ }
+
+ spin_lock_irq(&chip->lock);
+
+ if (incompatible_clock) {
+ chip->sample_rate = 48000;
+ set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+ }
+
+ /* Clear the current digital mode */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK;
+
+ /* Tweak the control reg */
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ control_reg |= E3G_SPDIF_OPTICAL_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_RCA:
+ /* E3G_SPDIF_OPTICAL_MODE bit cleared */
+ break;
+ case DIGITAL_MODE_ADAT:
+ control_reg |= E3G_ADAT_MODE;
+ control_reg &= ~E3G_DOUBLE_SPEED_MODE; /* @@ useless */
+ break;
+ }
+
+ err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
+ spin_unlock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ chip->digital_mode = mode;
+
+ DE_ACT(("set_digital_mode(%d)\n", chip->digital_mode));
+ return incompatible_clock;
+}
diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c
new file mode 100644
index 0000000..42afa83
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_dsp.c
@@ -0,0 +1,1125 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+#if PAGE_SIZE < 4096
+#error PAGE_SIZE is < 4k
+#endif
+
+static int restore_dsp_rettings(struct echoaudio *chip);
+
+
+/* Some vector commands involve the DSP reading or writing data to and from the
+comm page; if you send one of these commands to the DSP, it will complete the
+command and then write a non-zero value to the Handshake field in the
+comm page. This function waits for the handshake to show up. */
+static int wait_handshake(struct echoaudio *chip)
+{
+ int i;
+
+ /* Wait up to 10ms for the handshake from the DSP */
+ for (i = 0; i < HANDSHAKE_TIMEOUT; i++) {
+ /* Look for the handshake value */
+ if (chip->comm_page->handshake) {
+ /*if (i) DE_ACT(("Handshake time: %d\n", i));*/
+ return 0;
+ }
+ udelay(1);
+ }
+
+ snd_printk(KERN_ERR "wait_handshake(): Timeout waiting for DSP\n");
+ return -EBUSY;
+}
+
+
+
+/* Much of the interaction between the DSP and the driver is done via vector
+commands; send_vector writes a vector command to the DSP. Typically, this
+causes the DSP to read or write fields in the comm page.
+PCI posting is not required thanks to the handshake logic. */
+static int send_vector(struct echoaudio *chip, u32 command)
+{
+ int i;
+
+ wmb(); /* Flush all pending writes before sending the command */
+
+ /* Wait up to 100ms for the "vector busy" bit to be off */
+ for (i = 0; i < VECTOR_BUSY_TIMEOUT; i++) {
+ if (!(get_dsp_register(chip, CHI32_VECTOR_REG) &
+ CHI32_VECTOR_BUSY)) {
+ set_dsp_register(chip, CHI32_VECTOR_REG, command);
+ /*if (i) DE_ACT(("send_vector time: %d\n", i));*/
+ return 0;
+ }
+ udelay(1);
+ }
+
+ DE_ACT((KERN_ERR "timeout on send_vector\n"));
+ return -EBUSY;
+}
+
+
+
+/* write_dsp writes a 32-bit value to the DSP; this is used almost
+exclusively for loading the DSP. */
+static int write_dsp(struct echoaudio *chip, u32 data)
+{
+ u32 status, i;
+
+ for (i = 0; i < 10000000; i++) { /* timeout = 10s */
+ status = get_dsp_register(chip, CHI32_STATUS_REG);
+ if ((status & CHI32_STATUS_HOST_WRITE_EMPTY) != 0) {
+ set_dsp_register(chip, CHI32_DATA_REG, data);
+ wmb(); /* write it immediately */
+ return 0;
+ }
+ udelay(1);
+ cond_resched();
+ }
+
+ chip->bad_board = TRUE; /* Set TRUE until DSP re-loaded */
+ DE_ACT((KERN_ERR "write_dsp: Set bad_board to TRUE\n"));
+ return -EIO;
+}
+
+
+
+/* read_dsp reads a 32-bit value from the DSP; this is used almost
+exclusively for loading the DSP and checking the status of the ASIC. */
+static int read_dsp(struct echoaudio *chip, u32 *data)
+{
+ u32 status, i;
+
+ for (i = 0; i < READ_DSP_TIMEOUT; i++) {
+ status = get_dsp_register(chip, CHI32_STATUS_REG);
+ if ((status & CHI32_STATUS_HOST_READ_FULL) != 0) {
+ *data = get_dsp_register(chip, CHI32_DATA_REG);
+ return 0;
+ }
+ udelay(1);
+ cond_resched();
+ }
+
+ chip->bad_board = TRUE; /* Set TRUE until DSP re-loaded */
+ DE_INIT((KERN_ERR "read_dsp: Set bad_board to TRUE\n"));
+ return -EIO;
+}
+
+
+
+/****************************************************************************
+ Firmware loading functions
+ ****************************************************************************/
+
+/* This function is used to read back the serial number from the DSP;
+this is triggered by the SET_COMMPAGE_ADDR command.
+Only some early Echogals products have serial numbers in the ROM;
+the serial number is not used, but you still need to do this as
+part of the DSP load process. */
+static int read_sn(struct echoaudio *chip)
+{
+ int i;
+ u32 sn[6];
+
+ for (i = 0; i < 5; i++) {
+ if (read_dsp(chip, &sn[i])) {
+ snd_printk(KERN_ERR "Failed to read serial number\n");
+ return -EIO;
+ }
+ }
+ DE_INIT(("Read serial number %08x %08x %08x %08x %08x\n",
+ sn[0], sn[1], sn[2], sn[3], sn[4]));
+ return 0;
+}
+
+
+
+#ifndef ECHOCARD_HAS_ASIC
+/* This card has no ASIC, just return ok */
+static inline int check_asic_status(struct echoaudio *chip)
+{
+ chip->asic_loaded = TRUE;
+ return 0;
+}
+
+#endif /* !ECHOCARD_HAS_ASIC */
+
+
+
+#ifdef ECHOCARD_HAS_ASIC
+
+/* Load ASIC code - done after the DSP is loaded */
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic)
+{
+ const struct firmware *fw;
+ int err;
+ u32 i, size;
+ u8 *code;
+
+ if ((err = get_firmware(&fw, asic, chip)) < 0) {
+ snd_printk(KERN_WARNING "Firmware not found !\n");
+ return err;
+ }
+
+ code = (u8 *)fw->data;
+ size = fw->size;
+
+ /* Send the "Here comes the ASIC" command */
+ if (write_dsp(chip, cmd) < 0)
+ goto la_error;
+
+ /* Write length of ASIC file in bytes */
+ if (write_dsp(chip, size) < 0)
+ goto la_error;
+
+ for (i = 0; i < size; i++) {
+ if (write_dsp(chip, code[i]) < 0)
+ goto la_error;
+ }
+
+ DE_INIT(("ASIC loaded\n"));
+ free_firmware(fw);
+ return 0;
+
+la_error:
+ DE_INIT(("failed on write_dsp\n"));
+ free_firmware(fw);
+ return -EIO;
+}
+
+#endif /* ECHOCARD_HAS_ASIC */
+
+
+
+#ifdef DSP_56361
+
+/* Install the resident loader for 56361 DSPs; The resident loader is on
+the EPROM on the board for 56301 DSP. The resident loader is a tiny little
+program that is used to load the real DSP code. */
+static int install_resident_loader(struct echoaudio *chip)
+{
+ u32 address;
+ int index, words, i;
+ u16 *code;
+ u32 status;
+ const struct firmware *fw;
+
+ /* 56361 cards only! This check is required by the old 56301-based
+ Mona and Gina24 */
+ if (chip->device_id != DEVICE_ID_56361)
+ return 0;
+
+ /* Look to see if the resident loader is present. If the resident
+ loader is already installed, host flag 5 will be on. */
+ status = get_dsp_register(chip, CHI32_STATUS_REG);
+ if (status & CHI32_STATUS_REG_HF5) {
+ DE_INIT(("Resident loader already installed; status is 0x%x\n",
+ status));
+ return 0;
+ }
+
+ if ((i = get_firmware(&fw, &card_fw[FW_361_LOADER], chip)) < 0) {
+ snd_printk(KERN_WARNING "Firmware not found !\n");
+ return i;
+ }
+
+ /* The DSP code is an array of 16 bit words. The array is divided up
+ into sections. The first word of each section is the size in words,
+ followed by the section type.
+ Since DSP addresses and data are 24 bits wide, they each take up two
+ 16 bit words in the array.
+ This is a lot like the other loader loop, but it's not a loop, you
+ don't write the memory type, and you don't write a zero at the end. */
+
+ /* Set DSP format bits for 24 bit mode */
+ set_dsp_register(chip, CHI32_CONTROL_REG,
+ get_dsp_register(chip, CHI32_CONTROL_REG) | 0x900);
+
+ code = (u16 *)fw->data;
+
+ /* Skip the header section; the first word in the array is the size
+ of the first section, so the first real section of code is pointed
+ to by Code[0]. */
+ index = code[0];
+
+ /* Skip the section size, LRS block type, and DSP memory type */
+ index += 3;
+
+ /* Get the number of DSP words to write */
+ words = code[index++];
+
+ /* Get the DSP address for this block; 24 bits, so build from two words */
+ address = ((u32)code[index] << 16) + code[index + 1];
+ index += 2;
+
+ /* Write the count to the DSP */
+ if (write_dsp(chip, words)) {
+ DE_INIT(("install_resident_loader: Failed to write word count!\n"));
+ goto irl_error;
+ }
+ /* Write the DSP address */
+ if (write_dsp(chip, address)) {
+ DE_INIT(("install_resident_loader: Failed to write DSP address!\n"));
+ goto irl_error;
+ }
+ /* Write out this block of code to the DSP */
+ for (i = 0; i < words; i++) {
+ u32 data;
+
+ data = ((u32)code[index] << 16) + code[index + 1];
+ if (write_dsp(chip, data)) {
+ DE_INIT(("install_resident_loader: Failed to write DSP code\n"));
+ goto irl_error;
+ }
+ index += 2;
+ }
+
+ /* Wait for flag 5 to come up */
+ for (i = 0; i < 200; i++) { /* Timeout is 50us * 200 = 10ms */
+ udelay(50);
+ status = get_dsp_register(chip, CHI32_STATUS_REG);
+ if (status & CHI32_STATUS_REG_HF5)
+ break;
+ }
+
+ if (i == 200) {
+ DE_INIT(("Resident loader failed to set HF5\n"));
+ goto irl_error;
+ }
+
+ DE_INIT(("Resident loader successfully installed\n"));
+ free_firmware(fw);
+ return 0;
+
+irl_error:
+ free_firmware(fw);
+ return -EIO;
+}
+
+#endif /* DSP_56361 */
+
+
+static int load_dsp(struct echoaudio *chip, u16 *code)
+{
+ u32 address, data;
+ int index, words, i;
+
+ if (chip->dsp_code == code) {
+ DE_INIT(("DSP is already loaded!\n"));
+ return 0;
+ }
+ chip->bad_board = TRUE; /* Set TRUE until DSP loaded */
+ chip->dsp_code = NULL; /* Current DSP code not loaded */
+ chip->asic_loaded = FALSE; /* Loading the DSP code will reset the ASIC */
+
+ DE_INIT(("load_dsp: Set bad_board to TRUE\n"));
+
+ /* If this board requires a resident loader, install it. */
+#ifdef DSP_56361
+ if ((i = install_resident_loader(chip)) < 0)
+ return i;
+#endif
+
+ /* Send software reset command */
+ if (send_vector(chip, DSP_VC_RESET) < 0) {
+ DE_INIT(("LoadDsp: send_vector DSP_VC_RESET failed, Critical Failure\n"));
+ return -EIO;
+ }
+ /* Delay 10us */
+ udelay(10);
+
+ /* Wait 10ms for HF3 to indicate that software reset is complete */
+ for (i = 0; i < 1000; i++) { /* Timeout is 10us * 1000 = 10ms */
+ if (get_dsp_register(chip, CHI32_STATUS_REG) &
+ CHI32_STATUS_REG_HF3)
+ break;
+ udelay(10);
+ }
+
+ if (i == 1000) {
+ DE_INIT(("load_dsp: Timeout waiting for CHI32_STATUS_REG_HF3\n"));
+ return -EIO;
+ }
+
+ /* Set DSP format bits for 24 bit mode now that soft reset is done */
+ set_dsp_register(chip, CHI32_CONTROL_REG,
+ get_dsp_register(chip, CHI32_CONTROL_REG) | 0x900);
+
+ /* Main loader loop */
+
+ index = code[0];
+ for (;;) {
+ int block_type, mem_type;
+
+ /* Total Block Size */
+ index++;
+
+ /* Block Type */
+ block_type = code[index];
+ if (block_type == 4) /* We're finished */
+ break;
+
+ index++;
+
+ /* Memory Type P=0,X=1,Y=2 */
+ mem_type = code[index++];
+
+ /* Block Code Size */
+ words = code[index++];
+ if (words == 0) /* We're finished */
+ break;
+
+ /* Start Address */
+ address = ((u32)code[index] << 16) + code[index + 1];
+ index += 2;
+
+ if (write_dsp(chip, words) < 0) {
+ DE_INIT(("load_dsp: failed to write number of DSP words\n"));
+ return -EIO;
+ }
+ if (write_dsp(chip, address) < 0) {
+ DE_INIT(("load_dsp: failed to write DSP address\n"));
+ return -EIO;
+ }
+ if (write_dsp(chip, mem_type) < 0) {
+ DE_INIT(("load_dsp: failed to write DSP memory type\n"));
+ return -EIO;
+ }
+ /* Code */
+ for (i = 0; i < words; i++, index+=2) {
+ data = ((u32)code[index] << 16) + code[index + 1];
+ if (write_dsp(chip, data) < 0) {
+ DE_INIT(("load_dsp: failed to write DSP data\n"));
+ return -EIO;
+ }
+ }
+ }
+
+ if (write_dsp(chip, 0) < 0) { /* We're done!!! */
+ DE_INIT(("load_dsp: Failed to write final zero\n"));
+ return -EIO;
+ }
+ udelay(10);
+
+ for (i = 0; i < 5000; i++) { /* Timeout is 100us * 5000 = 500ms */
+ /* Wait for flag 4 - indicates that the DSP loaded OK */
+ if (get_dsp_register(chip, CHI32_STATUS_REG) &
+ CHI32_STATUS_REG_HF4) {
+ set_dsp_register(chip, CHI32_CONTROL_REG,
+ get_dsp_register(chip, CHI32_CONTROL_REG) & ~0x1b00);
+
+ if (write_dsp(chip, DSP_FNC_SET_COMMPAGE_ADDR) < 0) {
+ DE_INIT(("load_dsp: Failed to write DSP_FNC_SET_COMMPAGE_ADDR\n"));
+ return -EIO;
+ }
+
+ if (write_dsp(chip, chip->comm_page_phys) < 0) {
+ DE_INIT(("load_dsp: Failed to write comm page address\n"));
+ return -EIO;
+ }
+
+ /* Get the serial number via slave mode.
+ This is triggered by the SET_COMMPAGE_ADDR command.
+ We don't actually use the serial number but we have to
+ get it as part of the DSP init voodoo. */
+ if (read_sn(chip) < 0) {
+ DE_INIT(("load_dsp: Failed to read serial number\n"));
+ return -EIO;
+ }
+
+ chip->dsp_code = code; /* Show which DSP code loaded */
+ chip->bad_board = FALSE; /* DSP OK */
+ DE_INIT(("load_dsp: OK!\n"));
+ return 0;
+ }
+ udelay(100);
+ }
+
+ DE_INIT(("load_dsp: DSP load timed out waiting for HF4\n"));
+ return -EIO;
+}
+
+
+
+/* load_firmware takes care of loading the DSP and any ASIC code. */
+static int load_firmware(struct echoaudio *chip)
+{
+ const struct firmware *fw;
+ int box_type, err;
+
+ snd_assert(chip->dsp_code_to_load && chip->comm_page, return -EPERM);
+
+ /* See if the ASIC is present and working - only if the DSP is already loaded */
+ if (chip->dsp_code) {
+ if ((box_type = check_asic_status(chip)) >= 0)
+ return box_type;
+ /* ASIC check failed; force the DSP to reload */
+ chip->dsp_code = NULL;
+ }
+
+ if ((err = get_firmware(&fw, chip->dsp_code_to_load, chip)) < 0)
+ return err;
+ err = load_dsp(chip, (u16 *)fw->data);
+ free_firmware(fw);
+ if (err < 0)
+ return err;
+
+ if ((box_type = load_asic(chip)) < 0)
+ return box_type; /* error */
+
+ if ((err = restore_dsp_rettings(chip)) < 0)
+ return err;
+
+ return box_type;
+}
+
+
+
+/****************************************************************************
+ Mixer functions
+ ****************************************************************************/
+
+#if defined(ECHOCARD_HAS_INPUT_NOMINAL_LEVEL) || \
+ defined(ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL)
+
+/* Set the nominal level for an input or output bus (true = -10dBV, false = +4dBu) */
+static int set_nominal_level(struct echoaudio *chip, u16 index, char consumer)
+{
+ snd_assert(index < num_busses_out(chip) + num_busses_in(chip),
+ return -EINVAL);
+
+ /* Wait for the handshake (OK even if ASIC is not loaded) */
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->nominal_level[index] = consumer;
+
+ if (consumer)
+ chip->comm_page->nominal_level_mask |= cpu_to_le32(1 << index);
+ else
+ chip->comm_page->nominal_level_mask &= ~cpu_to_le32(1 << index);
+
+ return 0;
+}
+
+#endif /* ECHOCARD_HAS_*_NOMINAL_LEVEL */
+
+
+
+/* Set the gain for a single physical output channel (dB). */
+static int set_output_gain(struct echoaudio *chip, u16 channel, s8 gain)
+{
+ snd_assert(channel < num_busses_out(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ /* Save the new value */
+ chip->output_gain[channel] = gain;
+ chip->comm_page->line_out_level[channel] = gain;
+ return 0;
+}
+
+
+
+#ifdef ECHOCARD_HAS_MONITOR
+/* Set the monitor level from an input bus to an output bus. */
+static int set_monitor_gain(struct echoaudio *chip, u16 output, u16 input,
+ s8 gain)
+{
+ snd_assert(output < num_busses_out(chip) &&
+ input < num_busses_in(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->monitor_gain[output][input] = gain;
+ chip->comm_page->monitors[monitor_index(chip, output, input)] = gain;
+ return 0;
+}
+#endif /* ECHOCARD_HAS_MONITOR */
+
+
+/* Tell the DSP to read and update output, nominal & monitor levels in comm page. */
+static int update_output_line_level(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_OUTVOL);
+}
+
+
+
+/* Tell the DSP to read and update input levels in comm page */
+static int update_input_line_level(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_INGAIN);
+}
+
+
+
+/* set_meters_on turns the meters on or off. If meters are turned on, the DSP
+will write the meter and clock detect values to the comm page at about 30Hz */
+static void set_meters_on(struct echoaudio *chip, char on)
+{
+ if (on && !chip->meters_enabled) {
+ send_vector(chip, DSP_VC_METERS_ON);
+ chip->meters_enabled = 1;
+ } else if (!on && chip->meters_enabled) {
+ send_vector(chip, DSP_VC_METERS_OFF);
+ chip->meters_enabled = 0;
+ memset((s8 *)chip->comm_page->vu_meter, ECHOGAIN_MUTED,
+ DSP_MAXPIPES);
+ memset((s8 *)chip->comm_page->peak_meter, ECHOGAIN_MUTED,
+ DSP_MAXPIPES);
+ }
+}
+
+
+
+/* Fill out an the given array using the current values in the comm page.
+Meters are written in the comm page by the DSP in this order:
+ Output busses
+ Input busses
+ Output pipes (vmixer cards only)
+
+This function assumes there are no more than 16 in/out busses or pipes
+Meters is an array [3][16][2] of long. */
+static void get_audio_meters(struct echoaudio *chip, long *meters)
+{
+ int i, m, n;
+
+ m = 0;
+ n = 0;
+ for (i = 0; i < num_busses_out(chip); i++, m++) {
+ meters[n++] = chip->comm_page->vu_meter[m];
+ meters[n++] = chip->comm_page->peak_meter[m];
+ }
+ for (; n < 32; n++)
+ meters[n] = 0;
+
+#ifdef ECHOCARD_ECHO3G
+ m = E3G_MAX_OUTPUTS; /* Skip unused meters */
+#endif
+
+ for (i = 0; i < num_busses_in(chip); i++, m++) {
+ meters[n++] = chip->comm_page->vu_meter[m];
+ meters[n++] = chip->comm_page->peak_meter[m];
+ }
+ for (; n < 64; n++)
+ meters[n] = 0;
+
+#ifdef ECHOCARD_HAS_VMIXER
+ for (i = 0; i < num_pipes_out(chip); i++, m++) {
+ meters[n++] = chip->comm_page->vu_meter[m];
+ meters[n++] = chip->comm_page->peak_meter[m];
+ }
+#endif
+ for (; n < 96; n++)
+ meters[n] = 0;
+}
+
+
+
+static int restore_dsp_rettings(struct echoaudio *chip)
+{
+ int err;
+ DE_INIT(("restore_dsp_settings\n"));
+
+ if ((err = check_asic_status(chip)) < 0)
+ return err;
+
+ /* @ Gina20/Darla20 only. Should be harmless for other cards. */
+ chip->comm_page->gd_clock_state = GD_CLOCK_UNDEF;
+ chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_UNDEF;
+ chip->comm_page->handshake = 0xffffffff;
+
+ if ((err = set_sample_rate(chip, chip->sample_rate)) < 0)
+ return err;
+
+ if (chip->meters_enabled)
+ if (send_vector(chip, DSP_VC_METERS_ON) < 0)
+ return -EIO;
+
+#ifdef ECHOCARD_HAS_EXTERNAL_CLOCK
+ if (set_input_clock(chip, chip->input_clock) < 0)
+ return -EIO;
+#endif
+
+#ifdef ECHOCARD_HAS_OUTPUT_CLOCK_SWITCH
+ if (set_output_clock(chip, chip->output_clock) < 0)
+ return -EIO;
+#endif
+
+ if (update_output_line_level(chip) < 0)
+ return -EIO;
+
+ if (update_input_line_level(chip) < 0)
+ return -EIO;
+
+#ifdef ECHOCARD_HAS_VMIXER
+ if (update_vmixer_level(chip) < 0)
+ return -EIO;
+#endif
+
+ if (wait_handshake(chip) < 0)
+ return -EIO;
+ clear_handshake(chip);
+
+ DE_INIT(("restore_dsp_rettings done\n"));
+ return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+/****************************************************************************
+ Transport functions
+ ****************************************************************************/
+
+/* set_audio_format() sets the format of the audio data in host memory for
+this pipe. Note that _MS_ (mono-to-stereo) playback modes are not used by ALSA
+but they are here because they are just mono while capturing */
+static void set_audio_format(struct echoaudio *chip, u16 pipe_index,
+ const struct audioformat *format)
+{
+ u16 dsp_format;
+
+ dsp_format = DSP_AUDIOFORM_SS_16LE;
+
+ /* Look for super-interleave (no big-endian and 8 bits) */
+ if (format->interleave > 2) {
+ switch (format->bits_per_sample) {
+ case 16:
+ dsp_format = DSP_AUDIOFORM_SUPER_INTERLEAVE_16LE;
+ break;
+ case 24:
+ dsp_format = DSP_AUDIOFORM_SUPER_INTERLEAVE_24LE;
+ break;
+ case 32:
+ dsp_format = DSP_AUDIOFORM_SUPER_INTERLEAVE_32LE;
+ break;
+ }
+ dsp_format |= format->interleave;
+ } else if (format->data_are_bigendian) {
+ /* For big-endian data, only 32 bit samples are supported */
+ switch (format->interleave) {
+ case 1:
+ dsp_format = DSP_AUDIOFORM_MM_32BE;
+ break;
+#ifdef ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+ case 2:
+ dsp_format = DSP_AUDIOFORM_SS_32BE;
+ break;
+#endif
+ }
+ } else if (format->interleave == 1 &&
+ format->bits_per_sample == 32 && !format->mono_to_stereo) {
+ /* 32 bit little-endian mono->mono case */
+ dsp_format = DSP_AUDIOFORM_MM_32LE;
+ } else {
+ /* Handle the other little-endian formats */
+ switch (format->bits_per_sample) {
+ case 8:
+ if (format->interleave == 2)
+ dsp_format = DSP_AUDIOFORM_SS_8;
+ else
+ dsp_format = DSP_AUDIOFORM_MS_8;
+ break;
+ default:
+ case 16:
+ if (format->interleave == 2)
+ dsp_format = DSP_AUDIOFORM_SS_16LE;
+ else
+ dsp_format = DSP_AUDIOFORM_MS_16LE;
+ break;
+ case 24:
+ if (format->interleave == 2)
+ dsp_format = DSP_AUDIOFORM_SS_24LE;
+ else
+ dsp_format = DSP_AUDIOFORM_MS_24LE;
+ break;
+ case 32:
+ if (format->interleave == 2)
+ dsp_format = DSP_AUDIOFORM_SS_32LE;
+ else
+ dsp_format = DSP_AUDIOFORM_MS_32LE;
+ break;
+ }
+ }
+ DE_ACT(("set_audio_format[%d] = %x\n", pipe_index, dsp_format));
+ chip->comm_page->audio_format[pipe_index] = cpu_to_le16(dsp_format);
+}
+
+
+
+/* start_transport starts transport for a set of pipes.
+The bits 1 in channel_mask specify what pipes to start. Only the bit of the
+first channel must be set, regardless its interleave.
+Same thing for pause_ and stop_ -trasport below. */
+static int start_transport(struct echoaudio *chip, u32 channel_mask,
+ u32 cyclic_mask)
+{
+ DE_ACT(("start_transport %x\n", channel_mask));
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->cmd_start |= cpu_to_le32(channel_mask);
+
+ if (chip->comm_page->cmd_start) {
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_START_TRANSFER);
+ if (wait_handshake(chip))
+ return -EIO;
+ /* Keep track of which pipes are transporting */
+ chip->active_mask |= channel_mask;
+ chip->comm_page->cmd_start = 0;
+ return 0;
+ }
+
+ DE_ACT(("start_transport: No pipes to start!\n"));
+ return -EINVAL;
+}
+
+
+
+static int pause_transport(struct echoaudio *chip, u32 channel_mask)
+{
+ DE_ACT(("pause_transport %x\n", channel_mask));
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->cmd_stop |= cpu_to_le32(channel_mask);
+ chip->comm_page->cmd_reset = 0;
+ if (chip->comm_page->cmd_stop) {
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_STOP_TRANSFER);
+ if (wait_handshake(chip))
+ return -EIO;
+ /* Keep track of which pipes are transporting */
+ chip->active_mask &= ~channel_mask;
+ chip->comm_page->cmd_stop = 0;
+ chip->comm_page->cmd_reset = 0;
+ return 0;
+ }
+
+ DE_ACT(("pause_transport: No pipes to stop!\n"));
+ return 0;
+}
+
+
+
+static int stop_transport(struct echoaudio *chip, u32 channel_mask)
+{
+ DE_ACT(("stop_transport %x\n", channel_mask));
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->cmd_stop |= cpu_to_le32(channel_mask);
+ chip->comm_page->cmd_reset |= cpu_to_le32(channel_mask);
+ if (chip->comm_page->cmd_reset) {
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_STOP_TRANSFER);
+ if (wait_handshake(chip))
+ return -EIO;
+ /* Keep track of which pipes are transporting */
+ chip->active_mask &= ~channel_mask;
+ chip->comm_page->cmd_stop = 0;
+ chip->comm_page->cmd_reset = 0;
+ return 0;
+ }
+
+ DE_ACT(("stop_transport: No pipes to stop!\n"));
+ return 0;
+}
+
+
+
+static inline int is_pipe_allocated(struct echoaudio *chip, u16 pipe_index)
+{
+ return (chip->pipe_alloc_mask & (1 << pipe_index));
+}
+
+
+
+/* Stops everything and turns off the DSP. All pipes should be already
+stopped and unallocated. */
+static int rest_in_peace(struct echoaudio *chip)
+{
+ DE_ACT(("rest_in_peace() open=%x\n", chip->pipe_alloc_mask));
+
+ /* Stops all active pipes (just to be sure) */
+ stop_transport(chip, chip->active_mask);
+
+ set_meters_on(chip, FALSE);
+
+#ifdef ECHOCARD_HAS_MIDI
+ enable_midi_input(chip, FALSE);
+#endif
+
+ /* Go to sleep */
+ if (chip->dsp_code) {
+ /* Make load_firmware do a complete reload */
+ chip->dsp_code = NULL;
+ /* Put the DSP to sleep */
+ return send_vector(chip, DSP_VC_GO_COMATOSE);
+ }
+ return 0;
+}
+
+
+
+/* Fills the comm page with default values */
+static int init_dsp_comm_page(struct echoaudio *chip)
+{
+ /* Check if the compiler added extra padding inside the structure */
+ if (offsetof(struct comm_page, midi_output) != 0xbe0) {
+ DE_INIT(("init_dsp_comm_page() - Invalid struct comm_page structure\n"));
+ return -EPERM;
+ }
+
+ /* Init all the basic stuff */
+ chip->card_name = ECHOCARD_NAME;
+ chip->bad_board = TRUE; /* Set TRUE until DSP loaded */
+ chip->dsp_code = NULL; /* Current DSP code not loaded */
+ chip->digital_mode = DIGITAL_MODE_NONE;
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ chip->output_clock = ECHO_CLOCK_WORD;
+ chip->asic_loaded = FALSE;
+ memset(chip->comm_page, 0, sizeof(struct comm_page));
+
+ /* Init the comm page */
+ chip->comm_page->comm_size =
+ __constant_cpu_to_le32(sizeof(struct comm_page));
+ chip->comm_page->handshake = 0xffffffff;
+ chip->comm_page->midi_out_free_count =
+ __constant_cpu_to_le32(DSP_MIDI_OUT_FIFO_SIZE);
+ chip->comm_page->sample_rate = __constant_cpu_to_le32(44100);
+ chip->sample_rate = 44100;
+
+ /* Set line levels so we don't blast any inputs on startup */
+ memset(chip->comm_page->monitors, ECHOGAIN_MUTED, MONITOR_ARRAY_SIZE);
+ memset(chip->comm_page->vmixer, ECHOGAIN_MUTED, VMIXER_ARRAY_SIZE);
+
+ return 0;
+}
+
+
+
+/* This function initializes the several volume controls for busses and pipes.
+This MUST be called after the DSP is up and running ! */
+static int init_line_levels(struct echoaudio *chip)
+{
+ int st, i, o;
+
+ DE_INIT(("init_line_levels\n"));
+
+ /* Mute output busses */
+ for (i = 0; i < num_busses_out(chip); i++)
+ if ((st = set_output_gain(chip, i, ECHOGAIN_MUTED)))
+ return st;
+ if ((st = update_output_line_level(chip)))
+ return st;
+
+#ifdef ECHOCARD_HAS_VMIXER
+ /* Mute the Vmixer */
+ for (i = 0; i < num_pipes_out(chip); i++)
+ for (o = 0; o < num_busses_out(chip); o++)
+ if ((st = set_vmixer_gain(chip, o, i, ECHOGAIN_MUTED)))
+ return st;
+ if ((st = update_vmixer_level(chip)))
+ return st;
+#endif /* ECHOCARD_HAS_VMIXER */
+
+#ifdef ECHOCARD_HAS_MONITOR
+ /* Mute the monitor mixer */
+ for (o = 0; o < num_busses_out(chip); o++)
+ for (i = 0; i < num_busses_in(chip); i++)
+ if ((st = set_monitor_gain(chip, o, i, ECHOGAIN_MUTED)))
+ return st;
+ if ((st = update_output_line_level(chip)))
+ return st;
+#endif /* ECHOCARD_HAS_MONITOR */
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+ for (i = 0; i < num_busses_in(chip); i++)
+ if ((st = set_input_gain(chip, i, ECHOGAIN_MUTED)))
+ return st;
+ if ((st = update_input_line_level(chip)))
+ return st;
+#endif /* ECHOCARD_HAS_INPUT_GAIN */
+
+ return 0;
+}
+
+
+
+/* This is low level part of the interrupt handler.
+It returns -1 if the IRQ is not ours, or N>=0 if it is, where N is the number
+of midi data in the input queue. */
+static int service_irq(struct echoaudio *chip)
+{
+ int st;
+
+ /* Read the DSP status register and see if this DSP generated this interrupt */
+ if (get_dsp_register(chip, CHI32_STATUS_REG) & CHI32_STATUS_IRQ) {
+ st = 0;
+#ifdef ECHOCARD_HAS_MIDI
+ /* Get and parse midi data if present */
+ if (chip->comm_page->midi_input[0]) /* The count is at index 0 */
+ st = midi_service_irq(chip); /* Returns how many midi bytes we received */
+#endif
+ /* Clear the hardware interrupt */
+ chip->comm_page->midi_input[0] = 0;
+ send_vector(chip, DSP_VC_ACK_INT);
+ return st;
+ }
+ return -1;
+}
+
+
+
+
+/******************************************************************************
+ Functions for opening and closing pipes
+ ******************************************************************************/
+
+/* allocate_pipes is used to reserve audio pipes for your exclusive use.
+The call will fail if some pipes are already allocated. */
+static int allocate_pipes(struct echoaudio *chip, struct audiopipe *pipe,
+ int pipe_index, int interleave)
+{
+ int i;
+ u32 channel_mask;
+ char is_cyclic;
+
+ DE_ACT(("allocate_pipes: ch=%d int=%d\n", pipe_index, interleave));
+
+ if (chip->bad_board)
+ return -EIO;
+
+ is_cyclic = 1; /* This driver uses cyclic buffers only */
+
+ for (channel_mask = i = 0; i < interleave; i++)
+ channel_mask |= 1 << (pipe_index + i);
+ if (chip->pipe_alloc_mask & channel_mask) {
+ DE_ACT(("allocate_pipes: channel already open\n"));
+ return -EAGAIN;
+ }
+
+ chip->comm_page->position[pipe_index] = 0;
+ chip->pipe_alloc_mask |= channel_mask;
+ if (is_cyclic)
+ chip->pipe_cyclic_mask |= channel_mask;
+ pipe->index = pipe_index;
+ pipe->interleave = interleave;
+ pipe->state = PIPE_STATE_STOPPED;
+
+ /* The counter register is where the DSP writes the 32 bit DMA
+ position for a pipe. The DSP is constantly updating this value as
+ it moves data. The DMA counter is in units of bytes, not samples. */
+ pipe->dma_counter = &chip->comm_page->position[pipe_index];
+ *pipe->dma_counter = 0;
+ DE_ACT(("allocate_pipes: ok\n"));
+ return pipe_index;
+}
+
+
+
+static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe)
+{
+ u32 channel_mask;
+ int i;
+
+ DE_ACT(("free_pipes: Pipe %d\n", pipe->index));
+ snd_assert(is_pipe_allocated(chip, pipe->index), return -EINVAL);
+ snd_assert(pipe->state == PIPE_STATE_STOPPED, return -EINVAL);
+
+ for (channel_mask = i = 0; i < pipe->interleave; i++)
+ channel_mask |= 1 << (pipe->index + i);
+
+ chip->pipe_alloc_mask &= ~channel_mask;
+ chip->pipe_cyclic_mask &= ~channel_mask;
+ return 0;
+}
+
+
+
+/******************************************************************************
+ Functions for managing the scatter-gather list
+******************************************************************************/
+
+static int sglist_init(struct echoaudio *chip, struct audiopipe *pipe)
+{
+ pipe->sglist_head = 0;
+ memset(pipe->sgpage.area, 0, PAGE_SIZE);
+ chip->comm_page->sglist_addr[pipe->index].addr =
+ cpu_to_le32(pipe->sgpage.addr);
+ return 0;
+}
+
+
+
+static int sglist_add_mapping(struct echoaudio *chip, struct audiopipe *pipe,
+ dma_addr_t address, size_t length)
+{
+ int head = pipe->sglist_head;
+ struct sg_entry *list = (struct sg_entry *)pipe->sgpage.area;
+
+ if (head < MAX_SGLIST_ENTRIES - 1) {
+ list[head].addr = cpu_to_le32(address);
+ list[head].size = cpu_to_le32(length);
+ pipe->sglist_head++;
+ } else {
+ DE_ACT(("SGlist: too many fragments\n"));
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+
+
+static inline int sglist_add_irq(struct echoaudio *chip, struct audiopipe *pipe)
+{
+ return sglist_add_mapping(chip, pipe, 0, 0);
+}
+
+
+
+static inline int sglist_wrap(struct echoaudio *chip, struct audiopipe *pipe)
+{
+ return sglist_add_mapping(chip, pipe, pipe->sgpage.addr, 0);
+}
diff --git a/sound/pci/echoaudio/echoaudio_dsp.h b/sound/pci/echoaudio/echoaudio_dsp.h
new file mode 100644
index 0000000..e55ee00
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_dsp.h
@@ -0,0 +1,694 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+#ifndef _ECHO_DSP_
+#define _ECHO_DSP_
+
+
+/**** Echogals: Darla20, Gina20, Layla20, and Darla24 ****/
+#if defined(ECHOGALS_FAMILY)
+
+#define NUM_ASIC_TESTS 5
+#define READ_DSP_TIMEOUT 1000000L /* one second */
+
+/**** Echo24: Gina24, Layla24, Mona, Mia, Mia-midi ****/
+#elif defined(ECHO24_FAMILY)
+
+#define DSP_56361 /* Some Echo24 cards use the 56361 DSP */
+#define READ_DSP_TIMEOUT 100000L /* .1 second */
+
+/**** 3G: Gina3G, Layla3G ****/
+#elif defined(ECHO3G_FAMILY)
+
+#define DSP_56361
+#define READ_DSP_TIMEOUT 100000L /* .1 second */
+#define MIN_MTC_1X_RATE 32000
+
+/**** Indigo: Indigo, Indigo IO, Indigo DJ ****/
+#elif defined(INDIGO_FAMILY)
+
+#define DSP_56361
+#define READ_DSP_TIMEOUT 100000L /* .1 second */
+
+#else
+
+#error No family is defined
+
+#endif
+
+
+
+/*
+ *
+ * Max inputs and outputs
+ *
+ */
+
+#define DSP_MAXAUDIOINPUTS 16 /* Max audio input channels */
+#define DSP_MAXAUDIOOUTPUTS 16 /* Max audio output channels */
+#define DSP_MAXPIPES 32 /* Max total pipes (input + output) */
+
+
+/*
+ *
+ * These are the offsets for the memory-mapped DSP registers; the DSP base
+ * address is treated as the start of a u32 array.
+ */
+
+#define CHI32_CONTROL_REG 4
+#define CHI32_STATUS_REG 5
+#define CHI32_VECTOR_REG 6
+#define CHI32_DATA_REG 7
+
+
+/*
+ *
+ * Interesting bits within the DSP registers
+ *
+ */
+
+#define CHI32_VECTOR_BUSY 0x00000001
+#define CHI32_STATUS_REG_HF3 0x00000008
+#define CHI32_STATUS_REG_HF4 0x00000010
+#define CHI32_STATUS_REG_HF5 0x00000020
+#define CHI32_STATUS_HOST_READ_FULL 0x00000004
+#define CHI32_STATUS_HOST_WRITE_EMPTY 0x00000002
+#define CHI32_STATUS_IRQ 0x00000040
+
+
+/*
+ *
+ * DSP commands sent via slave mode; these are sent to the DSP by write_dsp()
+ *
+ */
+
+#define DSP_FNC_SET_COMMPAGE_ADDR 0x02
+#define DSP_FNC_LOAD_LAYLA_ASIC 0xa0
+#define DSP_FNC_LOAD_GINA24_ASIC 0xa0
+#define DSP_FNC_LOAD_MONA_PCI_CARD_ASIC 0xa0
+#define DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC 0xa0
+#define DSP_FNC_LOAD_MONA_EXTERNAL_ASIC 0xa1
+#define DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC 0xa1
+#define DSP_FNC_LOAD_3G_ASIC 0xa0
+
+
+/*
+ *
+ * Defines to handle the MIDI input state engine; these are used to properly
+ * extract MIDI time code bytes and their timestamps from the MIDI input stream.
+ *
+ */
+
+#define MIDI_IN_STATE_NORMAL 0
+#define MIDI_IN_STATE_TS_HIGH 1
+#define MIDI_IN_STATE_TS_LOW 2
+#define MIDI_IN_STATE_F1_DATA 3
+#define MIDI_IN_SKIP_DATA (-1)
+
+
+/*----------------------------------------------------------------------------
+
+Setting the sample rates on Layla24 is somewhat schizophrenic.
+
+For standard rates, it works exactly like Mona and Gina24. That is, for
+8, 11.025, 16, 22.05, 32, 44.1, 48, 88.2, and 96 kHz, you just set the
+appropriate bits in the control register and write the control register.
+
+In order to support MIDI time code sync (and possibly SMPTE LTC sync in
+the future), Layla24 also has "continuous sample rate mode". In this mode,
+Layla24 can generate any sample rate between 25 and 50 kHz inclusive, or
+50 to 100 kHz inclusive for double speed mode.
+
+To use continuous mode:
+
+-Set the clock select bits in the control register to 0xe (see the #define
+ below)
+
+-Set double-speed mode if you want to use sample rates above 50 kHz
+
+-Write the control register as you would normally
+
+-Now, you need to set the frequency register. First, you need to determine the
+ value for the frequency register. This is given by the following formula:
+
+frequency_reg = (LAYLA24_MAGIC_NUMBER / sample_rate) - 2
+
+Note the #define below for the magic number
+
+-Wait for the DSP handshake
+-Write the frequency_reg value to the .SampleRate field of the comm page
+-Send the vector command SET_LAYLA24_FREQUENCY_REG (see vmonkey.h)
+
+Once you have set the control register up for continuous mode, you can just
+write the frequency register to change the sample rate. This could be
+used for MIDI time code sync. For MTC sync, the control register is set for
+continuous mode. The driver then just keeps writing the
+SET_LAYLA24_FREQUENCY_REG command.
+
+-----------------------------------------------------------------------------*/
+
+#define LAYLA24_MAGIC_NUMBER 677376000
+#define LAYLA24_CONTINUOUS_CLOCK 0x000e
+
+
+/*
+ *
+ * DSP vector commands
+ *
+ */
+
+#define DSP_VC_RESET 0x80ff
+
+#ifndef DSP_56361
+
+#define DSP_VC_ACK_INT 0x8073
+#define DSP_VC_SET_VMIXER_GAIN 0x0000 /* Not used, only for compile */
+#define DSP_VC_START_TRANSFER 0x0075 /* Handshke rqd. */
+#define DSP_VC_METERS_ON 0x0079
+#define DSP_VC_METERS_OFF 0x007b
+#define DSP_VC_UPDATE_OUTVOL 0x007d /* Handshke rqd. */
+#define DSP_VC_UPDATE_INGAIN 0x007f /* Handshke rqd. */
+#define DSP_VC_ADD_AUDIO_BUFFER 0x0081 /* Handshke rqd. */
+#define DSP_VC_TEST_ASIC 0x00eb
+#define DSP_VC_UPDATE_CLOCKS 0x00ef /* Handshke rqd. */
+#define DSP_VC_SET_LAYLA_SAMPLE_RATE 0x00f1 /* Handshke rqd. */
+#define DSP_VC_SET_GD_AUDIO_STATE 0x00f1 /* Handshke rqd. */
+#define DSP_VC_WRITE_CONTROL_REG 0x00f1 /* Handshke rqd. */
+#define DSP_VC_MIDI_WRITE 0x00f5 /* Handshke rqd. */
+#define DSP_VC_STOP_TRANSFER 0x00f7 /* Handshke rqd. */
+#define DSP_VC_UPDATE_FLAGS 0x00fd /* Handshke rqd. */
+#define DSP_VC_GO_COMATOSE 0x00f9
+
+#else /* !DSP_56361 */
+
+/* Vector commands for families that use either the 56301 or 56361 */
+#define DSP_VC_ACK_INT 0x80F5
+#define DSP_VC_SET_VMIXER_GAIN 0x00DB /* Handshke rqd. */
+#define DSP_VC_START_TRANSFER 0x00DD /* Handshke rqd. */
+#define DSP_VC_METERS_ON 0x00EF
+#define DSP_VC_METERS_OFF 0x00F1
+#define DSP_VC_UPDATE_OUTVOL 0x00E3 /* Handshke rqd. */
+#define DSP_VC_UPDATE_INGAIN 0x00E5 /* Handshke rqd. */
+#define DSP_VC_ADD_AUDIO_BUFFER 0x00E1 /* Handshke rqd. */
+#define DSP_VC_TEST_ASIC 0x00ED
+#define DSP_VC_UPDATE_CLOCKS 0x00E9 /* Handshke rqd. */
+#define DSP_VC_SET_LAYLA24_FREQUENCY_REG 0x00E9 /* Handshke rqd. */
+#define DSP_VC_SET_LAYLA_SAMPLE_RATE 0x00EB /* Handshke rqd. */
+#define DSP_VC_SET_GD_AUDIO_STATE 0x00EB /* Handshke rqd. */
+#define DSP_VC_WRITE_CONTROL_REG 0x00EB /* Handshke rqd. */
+#define DSP_VC_MIDI_WRITE 0x00E7 /* Handshke rqd. */
+#define DSP_VC_STOP_TRANSFER 0x00DF /* Handshke rqd. */
+#define DSP_VC_UPDATE_FLAGS 0x00FB /* Handshke rqd. */
+#define DSP_VC_GO_COMATOSE 0x00d9
+
+#endif /* !DSP_56361 */
+
+
+/*
+ *
+ * Timeouts
+ *
+ */
+
+#define HANDSHAKE_TIMEOUT 20000 /* send_vector command timeout (20ms) */
+#define VECTOR_BUSY_TIMEOUT 100000 /* 100ms */
+#define MIDI_OUT_DELAY_USEC 2000 /* How long to wait after MIDI fills up */
+
+
+/*
+ *
+ * Flags for .Flags field in the comm page
+ *
+ */
+
+#define DSP_FLAG_MIDI_INPUT 0x0001 /* Enable MIDI input */
+#define DSP_FLAG_SPDIF_NONAUDIO 0x0002 /* Sets the "non-audio" bit
+ * in the S/PDIF out status
+ * bits. Clear this flag for
+ * audio data;
+ * set it for AC3 or WMA or
+ * some such */
+#define DSP_FLAG_PROFESSIONAL_SPDIF 0x0008 /* 1 Professional, 0 Consumer */
+
+
+/*
+ *
+ * Clock detect bits reported by the DSP for Gina20, Layla20, Darla24, and Mia
+ *
+ */
+
+#define GLDM_CLOCK_DETECT_BIT_WORD 0x0002
+#define GLDM_CLOCK_DETECT_BIT_SUPER 0x0004
+#define GLDM_CLOCK_DETECT_BIT_SPDIF 0x0008
+#define GLDM_CLOCK_DETECT_BIT_ESYNC 0x0010
+
+
+/*
+ *
+ * Clock detect bits reported by the DSP for Gina24, Mona, and Layla24
+ *
+ */
+
+#define GML_CLOCK_DETECT_BIT_WORD96 0x0002
+#define GML_CLOCK_DETECT_BIT_WORD48 0x0004
+#define GML_CLOCK_DETECT_BIT_SPDIF48 0x0008
+#define GML_CLOCK_DETECT_BIT_SPDIF96 0x0010
+#define GML_CLOCK_DETECT_BIT_WORD (GML_CLOCK_DETECT_BIT_WORD96 | GML_CLOCK_DETECT_BIT_WORD48)
+#define GML_CLOCK_DETECT_BIT_SPDIF (GML_CLOCK_DETECT_BIT_SPDIF48 | GML_CLOCK_DETECT_BIT_SPDIF96)
+#define GML_CLOCK_DETECT_BIT_ESYNC 0x0020
+#define GML_CLOCK_DETECT_BIT_ADAT 0x0040
+
+
+/*
+ *
+ * Layla clock numbers to send to DSP
+ *
+ */
+
+#define LAYLA20_CLOCK_INTERNAL 0
+#define LAYLA20_CLOCK_SPDIF 1
+#define LAYLA20_CLOCK_WORD 2
+#define LAYLA20_CLOCK_SUPER 3
+
+
+/*
+ *
+ * Gina/Darla clock states
+ *
+ */
+
+#define GD_CLOCK_NOCHANGE 0
+#define GD_CLOCK_44 1
+#define GD_CLOCK_48 2
+#define GD_CLOCK_SPDIFIN 3
+#define GD_CLOCK_UNDEF 0xff
+
+
+/*
+ *
+ * Gina/Darla S/PDIF status bits
+ *
+ */
+
+#define GD_SPDIF_STATUS_NOCHANGE 0
+#define GD_SPDIF_STATUS_44 1
+#define GD_SPDIF_STATUS_48 2
+#define GD_SPDIF_STATUS_UNDEF 0xff
+
+
+/*
+ *
+ * Layla20 output clocks
+ *
+ */
+
+#define LAYLA20_OUTPUT_CLOCK_SUPER 0
+#define LAYLA20_OUTPUT_CLOCK_WORD 1
+
+
+/****************************************************************************
+
+ Magic constants for the Darla24 hardware
+
+ ****************************************************************************/
+
+#define GD24_96000 0x0
+#define GD24_48000 0x1
+#define GD24_44100 0x2
+#define GD24_32000 0x3
+#define GD24_22050 0x4
+#define GD24_16000 0x5
+#define GD24_11025 0x6
+#define GD24_8000 0x7
+#define GD24_88200 0x8
+#define GD24_EXT_SYNC 0x9
+
+
+/*
+ *
+ * Return values from the DSP when ASIC is loaded
+ *
+ */
+
+#define ASIC_ALREADY_LOADED 0x1
+#define ASIC_NOT_LOADED 0x0
+
+
+/*
+ *
+ * DSP Audio formats
+ *
+ * These are the audio formats that the DSP can transfer
+ * via input and output pipes. LE means little-endian,
+ * BE means big-endian.
+ *
+ * DSP_AUDIOFORM_MS_8
+ *
+ * 8-bit mono unsigned samples. For playback,
+ * mono data is duplicated out the left and right channels
+ * of the output bus. The "MS" part of the name
+ * means mono->stereo.
+ *
+ * DSP_AUDIOFORM_MS_16LE
+ *
+ * 16-bit signed little-endian mono samples. Playback works
+ * like the previous code.
+ *
+ * DSP_AUDIOFORM_MS_24LE
+ *
+ * 24-bit signed little-endian mono samples. Data is packed
+ * three bytes per sample; if you had two samples 0x112233 and 0x445566
+ * they would be stored in memory like this: 33 22 11 66 55 44.
+ *
+ * DSP_AUDIOFORM_MS_32LE
+ *
+ * 24-bit signed little-endian mono samples in a 32-bit
+ * container. In other words, each sample is a 32-bit signed
+ * integer, where the actual audio data is left-justified
+ * in the 32 bits and only the 24 most significant bits are valid.
+ *
+ * DSP_AUDIOFORM_SS_8
+ * DSP_AUDIOFORM_SS_16LE
+ * DSP_AUDIOFORM_SS_24LE
+ * DSP_AUDIOFORM_SS_32LE
+ *
+ * Like the previous ones, except now with stereo interleaved
+ * data. "SS" means stereo->stereo.
+ *
+ * DSP_AUDIOFORM_MM_32LE
+ *
+ * Similar to DSP_AUDIOFORM_MS_32LE, except that the mono
+ * data is not duplicated out both the left and right outputs.
+ * This mode is used by the ASIO driver. Here, "MM" means
+ * mono->mono.
+ *
+ * DSP_AUDIOFORM_MM_32BE
+ *
+ * Just like DSP_AUDIOFORM_MM_32LE, but now the data is
+ * in big-endian format.
+ *
+ */
+
+#define DSP_AUDIOFORM_MS_8 0 /* 8 bit mono */
+#define DSP_AUDIOFORM_MS_16LE 1 /* 16 bit mono */
+#define DSP_AUDIOFORM_MS_24LE 2 /* 24 bit mono */
+#define DSP_AUDIOFORM_MS_32LE 3 /* 32 bit mono */
+#define DSP_AUDIOFORM_SS_8 4 /* 8 bit stereo */
+#define DSP_AUDIOFORM_SS_16LE 5 /* 16 bit stereo */
+#define DSP_AUDIOFORM_SS_24LE 6 /* 24 bit stereo */
+#define DSP_AUDIOFORM_SS_32LE 7 /* 32 bit stereo */
+#define DSP_AUDIOFORM_MM_32LE 8 /* 32 bit mono->mono little-endian */
+#define DSP_AUDIOFORM_MM_32BE 9 /* 32 bit mono->mono big-endian */
+#define DSP_AUDIOFORM_SS_32BE 10 /* 32 bit stereo big endian */
+#define DSP_AUDIOFORM_INVALID 0xFF /* Invalid audio format */
+
+
+/*
+ *
+ * Super-interleave is defined as interleaving by 4 or more. Darla20 and Gina20
+ * do not support super interleave.
+ *
+ * 16 bit, 24 bit, and 32 bit little endian samples are supported for super
+ * interleave. The interleave factor must be even. 16 - way interleave is the
+ * current maximum, so you can interleave by 4, 6, 8, 10, 12, 14, and 16.
+ *
+ * The actual format code is derived by taking the define below and or-ing with
+ * the interleave factor. So, 32 bit interleave by 6 is 0x86 and
+ * 16 bit interleave by 16 is (0x40 | 0x10) = 0x50.
+ *
+ */
+
+#define DSP_AUDIOFORM_SUPER_INTERLEAVE_16LE 0x40
+#define DSP_AUDIOFORM_SUPER_INTERLEAVE_24LE 0xc0
+#define DSP_AUDIOFORM_SUPER_INTERLEAVE_32LE 0x80
+
+
+/*
+ *
+ * Gina24, Mona, and Layla24 control register defines
+ *
+ */
+
+#define GML_CONVERTER_ENABLE 0x0010
+#define GML_SPDIF_PRO_MODE 0x0020 /* Professional S/PDIF == 1,
+ consumer == 0 */
+#define GML_SPDIF_SAMPLE_RATE0 0x0040
+#define GML_SPDIF_SAMPLE_RATE1 0x0080
+#define GML_SPDIF_TWO_CHANNEL 0x0100 /* 1 == two channels,
+ 0 == one channel */
+#define GML_SPDIF_NOT_AUDIO 0x0200
+#define GML_SPDIF_COPY_PERMIT 0x0400
+#define GML_SPDIF_24_BIT 0x0800 /* 1 == 24 bit, 0 == 20 bit */
+#define GML_ADAT_MODE 0x1000 /* 1 == ADAT mode, 0 == S/PDIF mode */
+#define GML_SPDIF_OPTICAL_MODE 0x2000 /* 1 == optical mode, 0 == RCA mode */
+#define GML_SPDIF_CDROM_MODE 0x3000 /* 1 == CDROM mode,
+ * 0 == RCA or optical mode */
+#define GML_DOUBLE_SPEED_MODE 0x4000 /* 1 == double speed,
+ 0 == single speed */
+
+#define GML_DIGITAL_IN_AUTO_MUTE 0x800000
+
+#define GML_96KHZ (0x0 | GML_DOUBLE_SPEED_MODE)
+#define GML_88KHZ (0x1 | GML_DOUBLE_SPEED_MODE)
+#define GML_48KHZ 0x2
+#define GML_44KHZ 0x3
+#define GML_32KHZ 0x4
+#define GML_22KHZ 0x5
+#define GML_16KHZ 0x6
+#define GML_11KHZ 0x7
+#define GML_8KHZ 0x8
+#define GML_SPDIF_CLOCK 0x9
+#define GML_ADAT_CLOCK 0xA
+#define GML_WORD_CLOCK 0xB
+#define GML_ESYNC_CLOCK 0xC
+#define GML_ESYNCx2_CLOCK 0xD
+
+#define GML_CLOCK_CLEAR_MASK 0xffffbff0
+#define GML_SPDIF_RATE_CLEAR_MASK (~(GML_SPDIF_SAMPLE_RATE0|GML_SPDIF_SAMPLE_RATE1))
+#define GML_DIGITAL_MODE_CLEAR_MASK 0xffffcfff
+#define GML_SPDIF_FORMAT_CLEAR_MASK 0xfffff01f
+
+
+/*
+ *
+ * Mia sample rate and clock setting constants
+ *
+ */
+
+#define MIA_32000 0x0040
+#define MIA_44100 0x0042
+#define MIA_48000 0x0041
+#define MIA_88200 0x0142
+#define MIA_96000 0x0141
+
+#define MIA_SPDIF 0x00000044
+#define MIA_SPDIF96 0x00000144
+
+#define MIA_MIDI_REV 1 /* Must be Mia rev 1 for MIDI support */
+
+
+/*
+ *
+ * 3G register bits
+ *
+ */
+
+#define E3G_CONVERTER_ENABLE 0x0010
+#define E3G_SPDIF_PRO_MODE 0x0020 /* Professional S/PDIF == 1,
+ consumer == 0 */
+#define E3G_SPDIF_SAMPLE_RATE0 0x0040
+#define E3G_SPDIF_SAMPLE_RATE1 0x0080
+#define E3G_SPDIF_TWO_CHANNEL 0x0100 /* 1 == two channels,
+ 0 == one channel */
+#define E3G_SPDIF_NOT_AUDIO 0x0200
+#define E3G_SPDIF_COPY_PERMIT 0x0400
+#define E3G_SPDIF_24_BIT 0x0800 /* 1 == 24 bit, 0 == 20 bit */
+#define E3G_DOUBLE_SPEED_MODE 0x4000 /* 1 == double speed,
+ 0 == single speed */
+#define E3G_PHANTOM_POWER 0x8000 /* 1 == phantom power on,
+ 0 == phantom power off */
+
+#define E3G_96KHZ (0x0 | E3G_DOUBLE_SPEED_MODE)
+#define E3G_88KHZ (0x1 | E3G_DOUBLE_SPEED_MODE)
+#define E3G_48KHZ 0x2
+#define E3G_44KHZ 0x3
+#define E3G_32KHZ 0x4
+#define E3G_22KHZ 0x5
+#define E3G_16KHZ 0x6
+#define E3G_11KHZ 0x7
+#define E3G_8KHZ 0x8
+#define E3G_SPDIF_CLOCK 0x9
+#define E3G_ADAT_CLOCK 0xA
+#define E3G_WORD_CLOCK 0xB
+#define E3G_CONTINUOUS_CLOCK 0xE
+
+#define E3G_ADAT_MODE 0x1000
+#define E3G_SPDIF_OPTICAL_MODE 0x2000
+
+#define E3G_CLOCK_CLEAR_MASK 0xbfffbff0
+#define E3G_DIGITAL_MODE_CLEAR_MASK 0xffffcfff
+#define E3G_SPDIF_FORMAT_CLEAR_MASK 0xfffff01f
+
+/* Clock detect bits reported by the DSP */
+#define E3G_CLOCK_DETECT_BIT_WORD96 0x0001
+#define E3G_CLOCK_DETECT_BIT_WORD48 0x0002
+#define E3G_CLOCK_DETECT_BIT_SPDIF48 0x0004
+#define E3G_CLOCK_DETECT_BIT_ADAT 0x0004
+#define E3G_CLOCK_DETECT_BIT_SPDIF96 0x0008
+#define E3G_CLOCK_DETECT_BIT_WORD (E3G_CLOCK_DETECT_BIT_WORD96|E3G_CLOCK_DETECT_BIT_WORD48)
+#define E3G_CLOCK_DETECT_BIT_SPDIF (E3G_CLOCK_DETECT_BIT_SPDIF48|E3G_CLOCK_DETECT_BIT_SPDIF96)
+
+/* Frequency control register */
+#define E3G_MAGIC_NUMBER 677376000
+#define E3G_FREQ_REG_DEFAULT (E3G_MAGIC_NUMBER / 48000 - 2)
+#define E3G_FREQ_REG_MAX 0xffff
+
+/* 3G external box types */
+#define E3G_GINA3G_BOX_TYPE 0x00
+#define E3G_LAYLA3G_BOX_TYPE 0x10
+#define E3G_ASIC_NOT_LOADED 0xffff
+#define E3G_BOX_TYPE_MASK 0xf0
+
+#define EXT_3GBOX_NC 0x01
+#define EXT_3GBOX_NOT_SET 0x02
+
+
+/*
+ *
+ * Gina20 & Layla20 have input gain controls for the analog inputs;
+ * this is the magic number for the hardware that gives you 0 dB at -10.
+ *
+ */
+
+#define GL20_INPUT_GAIN_MAGIC_NUMBER 0xC8
+
+
+/*
+ *
+ * Defines how much time must pass between DSP load attempts
+ *
+ */
+
+#define DSP_LOAD_ATTEMPT_PERIOD 1000000L /* One second */
+
+
+/*
+ *
+ * Size of arrays for the comm page. MAX_PLAY_TAPS and MAX_REC_TAPS are
+ * no longer used, but the sizes must still be right for the DSP to see
+ * the comm page correctly.
+ *
+ */
+
+#define MONITOR_ARRAY_SIZE 0x180
+#define VMIXER_ARRAY_SIZE 0x40
+#define MIDI_OUT_BUFFER_SIZE 32
+#define MIDI_IN_BUFFER_SIZE 256
+#define MAX_PLAY_TAPS 168
+#define MAX_REC_TAPS 192
+#define DSP_MIDI_OUT_FIFO_SIZE 64
+
+
+/* sg_entry is a single entry for the scatter-gather list. The array of struct
+sg_entry struct is read by the DSP, so all values must be little-endian. */
+
+#define MAX_SGLIST_ENTRIES 512
+
+struct sg_entry {
+ u32 addr;
+ u32 size;
+};
+
+
+/****************************************************************************
+
+ The comm page. This structure is read and written by the DSP; the
+ DSP code is a firm believer in the byte offsets written in the comments
+ at the end of each line. This structure should not be changed.
+
+ Any reads from or writes to this structure should be in little-endian format.
+
+ ****************************************************************************/
+
+struct comm_page { /* Base Length*/
+ u32 comm_size; /* size of this object 0x000 4 */
+ u32 flags; /* See Appendix A below 0x004 4 */
+ u32 unused; /* Unused entry 0x008 4 */
+ u32 sample_rate; /* Card sample rate in Hz 0x00c 4 */
+ volatile u32 handshake; /* DSP command handshake 0x010 4 */
+ u32 cmd_start; /* Chs. to start mask 0x014 4 */
+ u32 cmd_stop; /* Chs. to stop mask 0x018 4 */
+ u32 cmd_reset; /* Chs. to reset mask 0x01c 4 */
+ u16 audio_format[DSP_MAXPIPES]; /* Chs. audio format 0x020 32*2 */
+ struct sg_entry sglist_addr[DSP_MAXPIPES];
+ /* Chs. Physical sglist addrs 0x060 32*8 */
+ volatile u32 position[DSP_MAXPIPES];
+ /* Positions for ea. ch. 0x160 32*4 */
+ volatile s8 vu_meter[DSP_MAXPIPES];
+ /* VU meters 0x1e0 32*1 */
+ volatile s8 peak_meter[DSP_MAXPIPES];
+ /* Peak meters 0x200 32*1 */
+ s8 line_out_level[DSP_MAXAUDIOOUTPUTS];
+ /* Output gain 0x220 16*1 */
+ s8 line_in_level[DSP_MAXAUDIOINPUTS];
+ /* Input gain 0x230 16*1 */
+ s8 monitors[MONITOR_ARRAY_SIZE];
+ /* Monitor map 0x240 0x180 */
+ u32 play_coeff[MAX_PLAY_TAPS];
+ /* Gina/Darla play filters - obsolete 0x3c0 168*4 */
+ u32 rec_coeff[MAX_REC_TAPS];
+ /* Gina/Darla record filters - obsolete 0x660 192*4 */
+ volatile u16 midi_input[MIDI_IN_BUFFER_SIZE];
+ /* MIDI input data transfer buffer 0x960 256*2 */
+ u8 gd_clock_state; /* Chg Gina/Darla clock state 0xb60 1 */
+ u8 gd_spdif_status; /* Chg. Gina/Darla S/PDIF state 0xb61 1 */
+ u8 gd_resampler_state; /* Should always be 3 0xb62 1 */
+ u8 filler2; /* 0xb63 1 */
+ u32 nominal_level_mask; /* -10 level enable mask 0xb64 4 */
+ u16 input_clock; /* Chg. Input clock state 0xb68 2 */
+ u16 output_clock; /* Chg. Output clock state 0xb6a 2 */
+ volatile u32 status_clocks;
+ /* Current Input clock state 0xb6c 4 */
+ u32 ext_box_status; /* External box status 0xb70 4 */
+ u32 cmd_add_buffer; /* Pipes to add (obsolete) 0xb74 4 */
+ volatile u32 midi_out_free_count;
+ /* # of bytes free in MIDI output FIFO 0xb78 4 */
+ u32 unused2; /* Cyclic pipes 0xb7c 4 */
+ u32 control_register;
+ /* Mona, Gina24, Layla24, 3G ctrl reg 0xb80 4 */
+ u32 e3g_frq_register; /* 3G frequency register 0xb84 4 */
+ u8 filler[24]; /* filler 0xb88 24*1 */
+ s8 vmixer[VMIXER_ARRAY_SIZE];
+ /* Vmixer levels 0xba0 64*1 */
+ u8 midi_output[MIDI_OUT_BUFFER_SIZE];
+ /* MIDI output data 0xbe0 32*1 */
+};
+
+#endif /* _ECHO_DSP_ */
diff --git a/sound/pci/echoaudio/echoaudio_gml.c b/sound/pci/echoaudio/echoaudio_gml.c
new file mode 100644
index 0000000..3aa37e7
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_gml.c
@@ -0,0 +1,198 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+/* These functions are common for Gina24, Layla24 and Mona cards */
+
+
+/* ASIC status check - some cards have one or two ASICs that need to be
+loaded. Once that load is complete, this function is called to see if
+the load was successful.
+If this load fails, it does not necessarily mean that the hardware is
+defective - the external box may be disconnected or turned off. */
+static int check_asic_status(struct echoaudio *chip)
+{
+ u32 asic_status;
+
+ send_vector(chip, DSP_VC_TEST_ASIC);
+
+ /* The DSP will return a value to indicate whether or not the
+ ASIC is currently loaded */
+ if (read_dsp(chip, &asic_status) < 0) {
+ DE_INIT(("check_asic_status: failed on read_dsp\n"));
+ chip->asic_loaded = FALSE;
+ return -EIO;
+ }
+
+ chip->asic_loaded = (asic_status == ASIC_ALREADY_LOADED);
+ return chip->asic_loaded ? 0 : -EIO;
+}
+
+
+
+/* Most configuration of Gina24, Layla24, or Mona is accomplished by writing
+the control register. write_control_reg sends the new control register
+value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 value, char force)
+{
+ /* Handle the digital input auto-mute */
+ if (chip->digital_in_automute)
+ value |= GML_DIGITAL_IN_AUTO_MUTE;
+ else
+ value &= ~GML_DIGITAL_IN_AUTO_MUTE;
+
+ DE_ACT(("write_control_reg: 0x%x\n", value));
+
+ /* Write the control register */
+ value = cpu_to_le32(value);
+ if (value != chip->comm_page->control_register || force) {
+ if (wait_handshake(chip))
+ return -EIO;
+ chip->comm_page->control_register = value;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+ }
+ return 0;
+}
+
+
+
+/* Gina24, Layla24, and Mona support digital input auto-mute. If the digital
+input auto-mute is enabled, the DSP will only enable the digital inputs if
+the card is syncing to a valid clock on the ADAT or S/PDIF inputs.
+If the auto-mute is disabled, the digital inputs are enabled regardless of
+what the input clock is set or what is connected. */
+static int set_input_auto_mute(struct echoaudio *chip, int automute)
+{
+ DE_ACT(("set_input_auto_mute %d\n", automute));
+
+ chip->digital_in_automute = automute;
+
+ /* Re-set the input clock to the current value - indirectly causes
+ the auto-mute flag to be sent to the DSP */
+ return set_input_clock(chip, chip->input_clock);
+}
+
+
+
+/* S/PDIF coax / S/PDIF optical / ADAT - switch */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u8 previous_mode;
+ int err, i, o;
+
+ if (chip->bad_board)
+ return -EIO;
+
+ /* All audio channels must be closed before changing the digital mode */
+ snd_assert(!chip->pipe_alloc_mask, return -EAGAIN);
+
+ snd_assert(chip->digital_modes & (1 << mode), return -EINVAL);
+
+ previous_mode = chip->digital_mode;
+ err = dsp_set_digital_mode(chip, mode);
+
+ /* If we successfully changed the digital mode from or to ADAT,
+ then make sure all output, input and monitor levels are
+ updated by the DSP comm object. */
+ if (err >= 0 && previous_mode != mode &&
+ (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+ spin_lock_irq(&chip->lock);
+ for (o = 0; o < num_busses_out(chip); o++)
+ for (i = 0; i < num_busses_in(chip); i++)
+ set_monitor_gain(chip, o, i,
+ chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+ for (i = 0; i < num_busses_in(chip); i++)
+ set_input_gain(chip, i, chip->input_gain[i]);
+ update_input_line_level(chip);
+#endif
+
+ for (o = 0; o < num_busses_out(chip); o++)
+ set_output_gain(chip, o, chip->output_gain[o]);
+ update_output_line_level(chip);
+ spin_unlock_irq(&chip->lock);
+ }
+
+ return err;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+ u32 control_reg;
+ int err;
+
+ /* Clear the current S/PDIF flags */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_SPDIF_FORMAT_CLEAR_MASK;
+
+ /* Set the new S/PDIF flags depending on the mode */
+ control_reg |= GML_SPDIF_TWO_CHANNEL | GML_SPDIF_24_BIT |
+ GML_SPDIF_COPY_PERMIT;
+ if (prof) {
+ /* Professional mode */
+ control_reg |= GML_SPDIF_PRO_MODE;
+
+ switch (chip->sample_rate) {
+ case 32000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ control_reg |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 48000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE1;
+ break;
+ }
+ } else {
+ /* Consumer mode */
+ switch (chip->sample_rate) {
+ case 32000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 48000:
+ control_reg |= GML_SPDIF_SAMPLE_RATE1;
+ break;
+ }
+ }
+
+ if ((err = write_control_reg(chip, control_reg, FALSE)))
+ return err;
+ chip->professional_spdif = prof;
+ DE_ACT(("set_professional_spdif to %s\n",
+ prof ? "Professional" : "Consumer"));
+ return 0;
+}
diff --git a/sound/pci/echoaudio/gina20.c b/sound/pci/echoaudio/gina20.c
new file mode 100644
index 0000000..29d6d12
--- /dev/null
+++ b/sound/pci/echoaudio/gina20.c
@@ -0,0 +1,103 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_GINA20
+#define ECHOCARD_NAME "Gina20"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_GAIN
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT FALSE
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 2 */
+#define PX_ANALOG_IN 10 /* 2 */
+#define PX_DIGITAL_IN 12 /* 2 */
+#define PX_NUM 14
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 8 */
+#define BX_DIGITAL_OUT 8 /* 2 */
+#define BX_ANALOG_IN 10 /* 2 */
+#define BX_DIGITAL_IN 12 /* 2 */
+#define BX_NUM 14
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_GINA20_DSP 0
+
+static const struct firmware card_fw[] = {
+ {0, "gina20_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x1801, 0xECC0, 0x0020, 0, 0, 0}, /* DSP 56301 Gina20 rev.0 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
+ .rate_min = 44100,
+ .rate_max = 48000,
+ .channels_min = 1,
+ .channels_max = 2,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "gina20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/gina20_dsp.c b/sound/pci/echoaudio/gina20_dsp.c
new file mode 100644
index 0000000..2757c89
--- /dev/null
+++ b/sound/pci/echoaudio/gina20_dsp.c
@@ -0,0 +1,215 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int update_flags(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Gina20\n"));
+ snd_assert((subdevice_id & 0xfff0) == GINA20, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_GINA20_DSP];
+ chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+ chip->clock_state = GD_CLOCK_UNDEF;
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+ ECHO_CLOCK_BIT_SPDIF;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ return clock_bits;
+}
+
+
+
+/* The Gina20 has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u8 clock_state, spdif_status;
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ switch (rate) {
+ case 44100:
+ clock_state = GD_CLOCK_44;
+ spdif_status = GD_SPDIF_STATUS_44;
+ break;
+ case 48000:
+ clock_state = GD_CLOCK_48;
+ spdif_status = GD_SPDIF_STATUS_48;
+ break;
+ default:
+ clock_state = GD_CLOCK_NOCHANGE;
+ spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+ break;
+ }
+
+ if (chip->clock_state == clock_state)
+ clock_state = GD_CLOCK_NOCHANGE;
+ if (spdif_status == chip->spdif_status)
+ spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->comm_page->gd_clock_state = clock_state;
+ chip->comm_page->gd_spdif_status = spdif_status;
+ chip->comm_page->gd_resampler_state = 3; /* magic number - should always be 3 */
+
+ /* Save the new audio state if it changed */
+ if (clock_state != GD_CLOCK_NOCHANGE)
+ chip->clock_state = clock_state;
+ if (spdif_status != GD_SPDIF_STATUS_NOCHANGE)
+ chip->spdif_status = spdif_status;
+ chip->sample_rate = rate;
+
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ DE_ACT(("set_input_clock:\n"));
+
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ /* Reset the audio state to unknown (just in case) */
+ chip->clock_state = GD_CLOCK_UNDEF;
+ chip->spdif_status = GD_SPDIF_STATUS_UNDEF;
+ set_sample_rate(chip, chip->sample_rate);
+ chip->input_clock = clock;
+ DE_ACT(("Set Gina clock to INTERNAL\n"));
+ break;
+ case ECHO_CLOCK_SPDIF:
+ chip->comm_page->gd_clock_state = GD_CLOCK_SPDIFIN;
+ chip->comm_page->gd_spdif_status = GD_SPDIF_STATUS_NOCHANGE;
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE);
+ chip->clock_state = GD_CLOCK_SPDIFIN;
+ DE_ACT(("Set Gina20 clock to SPDIF\n"));
+ chip->input_clock = clock;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+
+/* Set input bus gain (one unit is 0.5dB !) */
+static int set_input_gain(struct echoaudio *chip, u16 input, int gain)
+{
+ snd_assert(input < num_busses_in(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->input_gain[input] = gain;
+ gain += GL20_INPUT_GAIN_MAGIC_NUMBER;
+ chip->comm_page->line_in_level[input] = gain;
+ return 0;
+}
+
+
+
+/* Tell the DSP to reread the flags from the comm page */
+static int update_flags(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+ DE_ACT(("set_professional_spdif %d\n", prof));
+ if (prof)
+ chip->comm_page->flags |=
+ __constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+ else
+ chip->comm_page->flags &=
+ ~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+ chip->professional_spdif = prof;
+ return update_flags(chip);
+}
diff --git a/sound/pci/echoaudio/gina24.c b/sound/pci/echoaudio/gina24.c
new file mode 100644
index 0000000..e464d72
--- /dev/null
+++ b/sound/pci/echoaudio/gina24.c
@@ -0,0 +1,123 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_GINA24
+#define ECHOCARD_NAME "Gina24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT 6
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 8 */
+#define PX_ANALOG_IN 16 /* 2 */
+#define PX_DIGITAL_IN 18 /* 8 */
+#define PX_NUM 26
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 8 */
+#define BX_DIGITAL_OUT 8 /* 8 */
+#define BX_ANALOG_IN 16 /* 2 */
+#define BX_DIGITAL_IN 18 /* 8 */
+#define BX_NUM 26
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_GINA24_301_DSP 1
+#define FW_GINA24_361_DSP 2
+#define FW_GINA24_301_ASIC 3
+#define FW_GINA24_361_ASIC 4
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "gina24_301_dsp.fw"},
+ {0, "gina24_361_dsp.fw"},
+ {0, "gina24_301_asic.fw"},
+ {0, "gina24_361_asic.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x1801, 0xECC0, 0x0050, 0, 0, 0}, /* DSP 56301 Gina24 rev.0 */
+ {0x1057, 0x1801, 0xECC0, 0x0051, 0, 0, 0}, /* DSP 56301 Gina24 rev.1 */
+ {0x1057, 0x3410, 0xECC0, 0x0050, 0, 0, 0}, /* DSP 56361 Gina24 rev.0 */
+ {0x1057, 0x3410, 0xECC0, 0x0051, 0, 0, 0}, /* DSP 56361 Gina24 rev.1 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 8000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions.
+ 220 ~= (512 - 1 - (BUFFER_BYTES_MAX / PAGE_SIZE)) / 2 */
+};
+
+#include "gina24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_gml.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/gina24_dsp.c b/sound/pci/echoaudio/gina24_dsp.c
new file mode 100644
index 0000000..144fc56
--- /dev/null
+++ b/sound/pci/echoaudio/gina24_dsp.c
@@ -0,0 +1,346 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Gina24\n"));
+ snd_assert((subdevice_id & 0xfff0) == GINA24, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->input_clock_types =
+ ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 |
+ ECHO_CLOCK_BIT_ADAT;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+
+ /* Gina24 comes in both '301 and '361 flavors */
+ if (chip->device_id == DEVICE_ID_56361) {
+ chip->dsp_code_to_load = &card_fw[FW_GINA24_361_DSP];
+ chip->digital_modes =
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+ } else {
+ chip->dsp_code_to_load = &card_fw[FW_GINA24_301_DSP];
+ chip->digital_modes =
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM;
+ }
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+ err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+ snd_assert(err >= 0, return err);
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+ clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ESYNC)
+ clock_bits |= ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96;
+
+ return clock_bits;
+}
+
+
+
+/* Gina24 has an ASIC on the PCI card which must be loaded for anything
+interesting to happen. */
+static int load_asic(struct echoaudio *chip)
+{
+ u32 control_reg;
+ int err;
+ const struct firmware *fw;
+
+ if (chip->asic_loaded)
+ return 1;
+
+ /* Give the DSP a few milliseconds to settle down */
+ mdelay(10);
+
+ /* Pick the correct ASIC for '301 or '361 Gina24 */
+ if (chip->device_id == DEVICE_ID_56361)
+ fw = &card_fw[FW_GINA24_361_ASIC];
+ else
+ fw = &card_fw[FW_GINA24_301_ASIC];
+
+ if ((err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, fw)) < 0)
+ return err;
+
+ chip->asic_code = fw;
+
+ /* Now give the new ASIC a little time to set up */
+ mdelay(10);
+ /* See if it worked */
+ err = check_asic_status(chip);
+
+ /* Set up the control register if the load succeeded -
+ 48 kHz, internal clock, S/PDIF RCA mode */
+ if (!err) {
+ control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
+ err = write_control_reg(chip, control_reg, TRUE);
+ }
+ DE_INIT(("load_asic() done\n"));
+ return err;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg, clock;
+
+ snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT,
+ return -EINVAL);
+
+ /* Only set the clock for internal mode. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ /* Save the rate anyhow */
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ return 0;
+ }
+
+ clock = 0;
+
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;
+
+ switch (rate) {
+ case 96000:
+ clock = GML_96KHZ;
+ break;
+ case 88200:
+ clock = GML_88KHZ;
+ break;
+ case 48000:
+ clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ clock = GML_44KHZ;
+ /* Professional mode ? */
+ if (control_reg & GML_SPDIF_PRO_MODE)
+ clock |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 32000:
+ clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 22050:
+ clock = GML_22KHZ;
+ break;
+ case 16000:
+ clock = GML_16KHZ;
+ break;
+ case 11025:
+ clock = GML_11KHZ;
+ break;
+ case 8000:
+ clock = GML_8KHZ;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+ return -EINVAL;
+ }
+
+ control_reg |= clock;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->sample_rate = rate;
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+
+ return write_control_reg(chip, control_reg, FALSE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ u32 control_reg, clocks_from_dsp;
+
+ DE_ACT(("set_input_clock:\n"));
+
+ /* Mask off the clock select bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register) &
+ GML_CLOCK_CLEAR_MASK;
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Gina24 clock to INTERNAL\n"));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ return set_sample_rate(chip, chip->sample_rate);
+ case ECHO_CLOCK_SPDIF:
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ DE_ACT(("Set Gina24 clock to SPDIF\n"));
+ control_reg |= GML_SPDIF_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_ADAT:
+ if (chip->digital_mode != DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ DE_ACT(("Set Gina24 clock to ADAT\n"));
+ control_reg |= GML_ADAT_CLOCK;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_ESYNC:
+ DE_ACT(("Set Gina24 clock to ESYNC\n"));
+ control_reg |= GML_ESYNC_CLOCK;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_ESYNC96:
+ DE_ACT(("Set Gina24 clock to ESYNC96\n"));
+ control_reg |= GML_ESYNC_CLOCK | GML_DOUBLE_SPEED_MODE;
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Gina24\n", clock));
+ return -EINVAL;
+ }
+
+ chip->input_clock = clock;
+ return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u32 control_reg;
+ int err, incompatible_clock;
+
+ /* Set clock to "internal" if it's not compatible with the new mode */
+ incompatible_clock = FALSE;
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ case DIGITAL_MODE_SPDIF_CDROM:
+ case DIGITAL_MODE_SPDIF_RCA:
+ if (chip->input_clock == ECHO_CLOCK_ADAT)
+ incompatible_clock = TRUE;
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ incompatible_clock = TRUE;
+ break;
+ default:
+ DE_ACT(("Digital mode not supported: %d\n", mode));
+ return -EINVAL;
+ }
+
+ spin_lock_irq(&chip->lock);
+
+ if (incompatible_clock) { /* Switch to 48KHz, internal */
+ chip->sample_rate = 48000;
+ set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+ }
+
+ /* Clear the current digital mode */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+ /* Tweak the control reg */
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ control_reg |= GML_SPDIF_OPTICAL_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_CDROM:
+ /* '361 Gina24 cards do not have the S/PDIF CD-ROM mode */
+ if (chip->device_id == DEVICE_ID_56301)
+ control_reg |= GML_SPDIF_CDROM_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_RCA:
+ /* GML_SPDIF_OPTICAL_MODE bit cleared */
+ break;
+ case DIGITAL_MODE_ADAT:
+ control_reg |= GML_ADAT_MODE;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ }
+
+ err = write_control_reg(chip, control_reg, TRUE);
+ spin_unlock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ chip->digital_mode = mode;
+
+ DE_ACT(("set_digital_mode to %d\n", chip->digital_mode));
+ return incompatible_clock;
+}
diff --git a/sound/pci/echoaudio/indigo.c b/sound/pci/echoaudio/indigo.c
new file mode 100644
index 0000000..bfd2467
--- /dev/null
+++ b/sound/pci/echoaudio/indigo.c
@@ -0,0 +1,104 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO
+#define ECHOCARD_NAME "Indigo"
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 0 */
+#define PX_ANALOG_IN 8 /* 0 */
+#define PX_DIGITAL_IN 8 /* 0 */
+#define PX_NUM 8
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 2 */
+#define BX_DIGITAL_OUT 2 /* 0 */
+#define BX_ANALOG_IN 2 /* 0 */
+#define BX_DIGITAL_IN 2 /* 0 */
+#define BX_NUM 2
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_INDIGO_DSP 1
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "indigo_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x3410, 0xECC0, 0x0090, 0, 0, 0}, /* Indigo */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 32000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+};
+
+#include "indigo_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigo_dsp.c b/sound/pci/echoaudio/indigo_dsp.c
new file mode 100644
index 0000000..d6ac773
--- /dev/null
+++ b/sound/pci/echoaudio/indigo_dsp.c
@@ -0,0 +1,170 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Indigo\n"));
+ snd_assert((subdevice_id & 0xfff0) == INDIGO, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_INDIGO_DSP];
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ /* Default routing of the virtual channels: all vchannels are routed
+ to the stereo output */
+ set_vmixer_gain(chip, 0, 0, 0);
+ set_vmixer_gain(chip, 1, 1, 0);
+ set_vmixer_gain(chip, 0, 2, 0);
+ set_vmixer_gain(chip, 1, 3, 0);
+ set_vmixer_gain(chip, 0, 4, 0);
+ set_vmixer_gain(chip, 1, 5, 0);
+ set_vmixer_gain(chip, 0, 6, 0);
+ set_vmixer_gain(chip, 1, 7, 0);
+ err = update_vmixer_level(chip);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The Indigo has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg;
+
+ switch (rate) {
+ case 96000:
+ control_reg = MIA_96000;
+ break;
+ case 88200:
+ control_reg = MIA_88200;
+ break;
+ case 48000:
+ control_reg = MIA_48000;
+ break;
+ case 44100:
+ control_reg = MIA_44100;
+ break;
+ case 32000:
+ control_reg = MIA_32000;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+ return -EINVAL;
+ }
+
+ /* Set the control register if it has changed */
+ if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->comm_page->control_register = cpu_to_le32(control_reg);
+ chip->sample_rate = rate;
+
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+ }
+ return 0;
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain)
+{
+ int index;
+
+ snd_assert(pipe < num_pipes_out(chip) &&
+ output < num_busses_out(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->vmixer_gain[output][pipe] = gain;
+ index = output * num_pipes_out(chip) + pipe;
+ chip->comm_page->vmixer[index] = gain;
+
+ DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
+ return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
diff --git a/sound/pci/echoaudio/indigodj.c b/sound/pci/echoaudio/indigodj.c
new file mode 100644
index 0000000..8ed7ff1
--- /dev/null
+++ b/sound/pci/echoaudio/indigodj.c
@@ -0,0 +1,104 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO_DJ
+#define ECHOCARD_NAME "Indigo DJ"
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 0 */
+#define PX_ANALOG_IN 8 /* 0 */
+#define PX_DIGITAL_IN 8 /* 0 */
+#define PX_NUM 8
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 4 */
+#define BX_DIGITAL_OUT 4 /* 0 */
+#define BX_ANALOG_IN 4 /* 0 */
+#define BX_DIGITAL_IN 4 /* 0 */
+#define BX_NUM 4
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_INDIGO_DJ_DSP 1
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "indigo_dj_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x3410, 0xECC0, 0x00B0, 0, 0, 0}, /* Indigo DJ*/
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 32000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 4,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+};
+
+#include "indigodj_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigodj_dsp.c b/sound/pci/echoaudio/indigodj_dsp.c
new file mode 100644
index 0000000..500e150
--- /dev/null
+++ b/sound/pci/echoaudio/indigodj_dsp.c
@@ -0,0 +1,170 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Indigo DJ\n"));
+ snd_assert((subdevice_id & 0xfff0) == INDIGO_DJ, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_INDIGO_DJ_DSP];
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ /* Default routing of the virtual channels: vchannels 0-3 and
+ vchannels 4-7 are routed to real channels 0-4 */
+ set_vmixer_gain(chip, 0, 0, 0);
+ set_vmixer_gain(chip, 1, 1, 0);
+ set_vmixer_gain(chip, 2, 2, 0);
+ set_vmixer_gain(chip, 3, 3, 0);
+ set_vmixer_gain(chip, 0, 4, 0);
+ set_vmixer_gain(chip, 1, 5, 0);
+ set_vmixer_gain(chip, 2, 6, 0);
+ set_vmixer_gain(chip, 3, 7, 0);
+ err = update_vmixer_level(chip);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The IndigoDJ has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg;
+
+ switch (rate) {
+ case 96000:
+ control_reg = MIA_96000;
+ break;
+ case 88200:
+ control_reg = MIA_88200;
+ break;
+ case 48000:
+ control_reg = MIA_48000;
+ break;
+ case 44100:
+ control_reg = MIA_44100;
+ break;
+ case 32000:
+ control_reg = MIA_32000;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+ return -EINVAL;
+ }
+
+ /* Set the control register if it has changed */
+ if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->comm_page->control_register = cpu_to_le32(control_reg);
+ chip->sample_rate = rate;
+
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+ }
+ return 0;
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain)
+{
+ int index;
+
+ snd_assert(pipe < num_pipes_out(chip) &&
+ output < num_busses_out(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->vmixer_gain[output][pipe] = gain;
+ index = output * num_pipes_out(chip) + pipe;
+ chip->comm_page->vmixer[index] = gain;
+
+ DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
+ return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
diff --git a/sound/pci/echoaudio/indigoio.c b/sound/pci/echoaudio/indigoio.c
new file mode 100644
index 0000000..a8788e9
--- /dev/null
+++ b/sound/pci/echoaudio/indigoio.c
@@ -0,0 +1,105 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define INDIGO_FAMILY
+#define ECHOCARD_INDIGO_IO
+#define ECHOCARD_NAME "Indigo IO"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 0 */
+#define PX_ANALOG_IN 8 /* 2 */
+#define PX_DIGITAL_IN 10 /* 0 */
+#define PX_NUM 10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 2 */
+#define BX_DIGITAL_OUT 2 /* 0 */
+#define BX_ANALOG_IN 2 /* 2 */
+#define BX_DIGITAL_IN 4 /* 0 */
+#define BX_NUM 4
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_INDIGO_IO_DSP 1
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "indigo_io_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x3410, 0xECC0, 0x00A0, 0, 0, 0}, /* Indigo IO*/
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 32000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+};
+
+#include "indigoio_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+
diff --git a/sound/pci/echoaudio/indigoio_dsp.c b/sound/pci/echoaudio/indigoio_dsp.c
new file mode 100644
index 0000000..f3ad13d
--- /dev/null
+++ b/sound/pci/echoaudio/indigoio_dsp.c
@@ -0,0 +1,141 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Indigo IO\n"));
+ snd_assert((subdevice_id & 0xfff0) == INDIGO_IO, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_INDIGO_IO_DSP];
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ /* Default routing of the virtual channels: all vchannels are routed
+ to the stereo output */
+ set_vmixer_gain(chip, 0, 0, 0);
+ set_vmixer_gain(chip, 1, 1, 0);
+ set_vmixer_gain(chip, 0, 2, 0);
+ set_vmixer_gain(chip, 1, 3, 0);
+ set_vmixer_gain(chip, 0, 4, 0);
+ set_vmixer_gain(chip, 1, 5, 0);
+ set_vmixer_gain(chip, 0, 6, 0);
+ set_vmixer_gain(chip, 1, 7, 0);
+ err = update_vmixer_level(chip);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ return ECHO_CLOCK_BIT_INTERNAL;
+}
+
+
+
+/* The IndigoIO has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->sample_rate = rate;
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain)
+{
+ int index;
+
+ snd_assert(pipe < num_pipes_out(chip) &&
+ output < num_busses_out(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->vmixer_gain[output][pipe] = gain;
+ index = output * num_pipes_out(chip) + pipe;
+ chip->comm_page->vmixer[index] = gain;
+
+ DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
+ return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
diff --git a/sound/pci/echoaudio/layla20.c b/sound/pci/echoaudio/layla20.c
new file mode 100644
index 0000000..e503d74
--- /dev/null
+++ b/sound/pci/echoaudio/layla20.c
@@ -0,0 +1,112 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_LAYLA20
+#define ECHOCARD_NAME "Layla20"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_GAIN
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT FALSE
+#define ECHOCARD_HAS_OUTPUT_CLOCK_SWITCH
+#define ECHOCARD_HAS_MIDI
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 10 */
+#define PX_DIGITAL_OUT 10 /* 2 */
+#define PX_ANALOG_IN 12 /* 8 */
+#define PX_DIGITAL_IN 20 /* 2 */
+#define PX_NUM 22
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 10 */
+#define BX_DIGITAL_OUT 10 /* 2 */
+#define BX_ANALOG_IN 12 /* 8 */
+#define BX_DIGITAL_IN 20 /* 2 */
+#define BX_NUM 22
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_LAYLA20_DSP 0
+#define FW_LAYLA20_ASIC 1
+
+static const struct firmware card_fw[] = {
+ {0, "layla20_dsp.fw"},
+ {0, "layla20_asic.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x1801, 0xECC0, 0x0030, 0, 0, 0}, /* DSP 56301 Layla20 rev.0 */
+ {0x1057, 0x1801, 0xECC0, 0x0031, 0, 0, 0}, /* DSP 56301 Layla20 rev.1 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000,
+ .rate_max = 50000,
+ .channels_min = 1,
+ .channels_max = 10,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+#include "layla20_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/layla20_dsp.c b/sound/pci/echoaudio/layla20_dsp.c
new file mode 100644
index 0000000..990c9a6
--- /dev/null
+++ b/sound/pci/echoaudio/layla20_dsp.c
@@ -0,0 +1,290 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int read_dsp(struct echoaudio *chip, u32 *data);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+static int update_flags(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Layla20\n"));
+ snd_assert((subdevice_id & 0xfff0) == LAYLA20, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->has_midi = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_LAYLA20_DSP];
+ chip->input_clock_types =
+ ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_SUPER;
+ chip->output_clock_types =
+ ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_SUPER;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_WORD) {
+ if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SUPER)
+ clock_bits |= ECHO_CLOCK_BIT_SUPER;
+ else
+ clock_bits |= ECHO_CLOCK_BIT_WORD;
+ }
+
+ return clock_bits;
+}
+
+
+
+/* ASIC status check - some cards have one or two ASICs that need to be
+loaded. Once that load is complete, this function is called to see if
+the load was successful.
+If this load fails, it does not necessarily mean that the hardware is
+defective - the external box may be disconnected or turned off.
+This routine sometimes fails for Layla20; for Layla20, the loop runs
+5 times and succeeds if it wins on three of the loops. */
+static int check_asic_status(struct echoaudio *chip)
+{
+ u32 asic_status;
+ int goodcnt, i;
+
+ chip->asic_loaded = FALSE;
+ for (i = goodcnt = 0; i < 5; i++) {
+ send_vector(chip, DSP_VC_TEST_ASIC);
+
+ /* The DSP will return a value to indicate whether or not
+ the ASIC is currently loaded */
+ if (read_dsp(chip, &asic_status) < 0) {
+ DE_ACT(("check_asic_status: failed on read_dsp\n"));
+ return -EIO;
+ }
+
+ if (asic_status == ASIC_ALREADY_LOADED) {
+ if (++goodcnt == 3) {
+ chip->asic_loaded = TRUE;
+ return 0;
+ }
+ }
+ }
+ return -EIO;
+}
+
+
+
+/* Layla20 has an ASIC in the external box */
+static int load_asic(struct echoaudio *chip)
+{
+ int err;
+
+ if (chip->asic_loaded)
+ return 0;
+
+ err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA_ASIC,
+ &card_fw[FW_LAYLA20_ASIC]);
+ if (err < 0)
+ return err;
+
+ /* Check if ASIC is alive and well. */
+ return check_asic_status(chip);
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ snd_assert(rate >= 8000 && rate <= 50000, return -EINVAL);
+
+ /* Only set the clock for internal mode. Do not return failure,
+ simply treat it as a non-event. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ return 0;
+ }
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ DE_ACT(("set_sample_rate(%d)\n", rate));
+ chip->sample_rate = rate;
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_LAYLA_SAMPLE_RATE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock_source)
+{
+ u16 clock;
+ u32 rate;
+
+ DE_ACT(("set_input_clock:\n"));
+ rate = 0;
+ switch (clock_source) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Layla20 clock to INTERNAL\n"));
+ rate = chip->sample_rate;
+ clock = LAYLA20_CLOCK_INTERNAL;
+ break;
+ case ECHO_CLOCK_SPDIF:
+ DE_ACT(("Set Layla20 clock to SPDIF\n"));
+ clock = LAYLA20_CLOCK_SPDIF;
+ break;
+ case ECHO_CLOCK_WORD:
+ DE_ACT(("Set Layla20 clock to WORD\n"));
+ clock = LAYLA20_CLOCK_WORD;
+ break;
+ case ECHO_CLOCK_SUPER:
+ DE_ACT(("Set Layla20 clock to SUPER\n"));
+ clock = LAYLA20_CLOCK_SUPER;
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Layla24\n",
+ clock_source));
+ return -EINVAL;
+ }
+ chip->input_clock = clock_source;
+
+ chip->comm_page->input_clock = cpu_to_le16(clock);
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+
+ if (rate)
+ set_sample_rate(chip, rate);
+
+ return 0;
+}
+
+
+
+static int set_output_clock(struct echoaudio *chip, u16 clock)
+{
+ DE_ACT(("set_output_clock: %d\n", clock));
+ switch (clock) {
+ case ECHO_CLOCK_SUPER:
+ clock = LAYLA20_OUTPUT_CLOCK_SUPER;
+ break;
+ case ECHO_CLOCK_WORD:
+ clock = LAYLA20_OUTPUT_CLOCK_WORD;
+ break;
+ default:
+ DE_ACT(("set_output_clock wrong clock\n"));
+ return -EINVAL;
+ }
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->output_clock = cpu_to_le16(clock);
+ chip->output_clock = clock;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+}
+
+
+
+/* Set input bus gain (one unit is 0.5dB !) */
+static int set_input_gain(struct echoaudio *chip, u16 input, int gain)
+{
+ snd_assert(input < num_busses_in(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->input_gain[input] = gain;
+ gain += GL20_INPUT_GAIN_MAGIC_NUMBER;
+ chip->comm_page->line_in_level[input] = gain;
+ return 0;
+}
+
+
+
+/* Tell the DSP to reread the flags from the comm page */
+static int update_flags(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+ DE_ACT(("set_professional_spdif %d\n", prof));
+ if (prof)
+ chip->comm_page->flags |=
+ __constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+ else
+ chip->comm_page->flags &=
+ ~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+ chip->professional_spdif = prof;
+ return update_flags(chip);
+}
diff --git a/sound/pci/echoaudio/layla24.c b/sound/pci/echoaudio/layla24.c
new file mode 100644
index 0000000..d4581fd
--- /dev/null
+++ b/sound/pci/echoaudio/layla24.c
@@ -0,0 +1,121 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_LAYLA24
+#define ECHOCARD_NAME "Layla24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT 6
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 8 */
+#define PX_ANALOG_IN 16 /* 8 */
+#define PX_DIGITAL_IN 24 /* 8 */
+#define PX_NUM 32
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 8 */
+#define BX_DIGITAL_OUT 8 /* 8 */
+#define BX_ANALOG_IN 16 /* 8 */
+#define BX_DIGITAL_IN 24 /* 8 */
+#define BX_NUM 32
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_LAYLA24_DSP 1
+#define FW_LAYLA24_1_ASIC 2
+#define FW_LAYLA24_2A_ASIC 3
+#define FW_LAYLA24_2S_ASIC 4
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "layla24_dsp.fw"},
+ {0, "layla24_1_asic.fw"},
+ {0, "layla24_2A_asic.fw"},
+ {0, "layla24_2S_asic.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x3410, 0xECC0, 0x0060, 0, 0, 0}, /* DSP 56361 Layla24 rev.0 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_8000_96000,
+ .rate_min = 8000,
+ .rate_max = 100000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "layla24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_gml.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/layla24_dsp.c b/sound/pci/echoaudio/layla24_dsp.c
new file mode 100644
index 0000000..7ec5b63
--- /dev/null
+++ b/sound/pci/echoaudio/layla24_dsp.c
@@ -0,0 +1,394 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Layla24\n"));
+ snd_assert((subdevice_id & 0xfff0) == LAYLA24, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->has_midi = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_LAYLA24_DSP];
+ chip->input_clock_types =
+ ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+ chip->digital_modes =
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+ snd_assert(err >= 0, return err);
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+ clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+ clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+ return clock_bits;
+}
+
+
+
+/* Layla24 has an ASIC on the PCI card and another ASIC in the external box;
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+ int err;
+
+ if (chip->asic_loaded)
+ return 1;
+
+ DE_INIT(("load_asic\n"));
+
+ /* Give the DSP a few milliseconds to settle down */
+ mdelay(10);
+
+ /* Load the ASIC for the PCI card */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC,
+ &card_fw[FW_LAYLA24_1_ASIC]);
+ if (err < 0)
+ return err;
+
+ chip->asic_code = &card_fw[FW_LAYLA24_2S_ASIC];
+
+ /* Now give the new ASIC a little time to set up */
+ mdelay(10);
+
+ /* Do the external one */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+ &card_fw[FW_LAYLA24_2S_ASIC]);
+ if (err < 0)
+ return FALSE;
+
+ /* Now give the external ASIC a little time to set up */
+ mdelay(10);
+
+ /* See if it worked */
+ err = check_asic_status(chip);
+
+ /* Set up the control register if the load succeeded -
+ 48 kHz, internal clock, S/PDIF RCA mode */
+ if (!err)
+ err = write_control_reg(chip, GML_CONVERTER_ENABLE | GML_48KHZ,
+ TRUE);
+
+ DE_INIT(("load_asic() done\n"));
+ return err;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg, clock, base_rate;
+
+ snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT,
+ return -EINVAL);
+
+ /* Only set the clock for internal mode. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ /* Save the rate anyhow */
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ return 0;
+ }
+
+ /* Get the control register & clear the appropriate bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;
+
+ clock = 0;
+
+ switch (rate) {
+ case 96000:
+ clock = GML_96KHZ;
+ break;
+ case 88200:
+ clock = GML_88KHZ;
+ break;
+ case 48000:
+ clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ clock = GML_44KHZ;
+ /* Professional mode */
+ if (control_reg & GML_SPDIF_PRO_MODE)
+ clock |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 32000:
+ clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 22050:
+ clock = GML_22KHZ;
+ break;
+ case 16000:
+ clock = GML_16KHZ;
+ break;
+ case 11025:
+ clock = GML_11KHZ;
+ break;
+ case 8000:
+ clock = GML_8KHZ;
+ break;
+ default:
+ /* If this is a non-standard rate, then the driver needs to
+ use Layla24's special "continuous frequency" mode */
+ clock = LAYLA24_CONTINUOUS_CLOCK;
+ if (rate > 50000) {
+ base_rate = rate >> 1;
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ } else {
+ base_rate = rate;
+ }
+
+ if (base_rate < 25000)
+ base_rate = 25000;
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->sample_rate =
+ cpu_to_le32(LAYLA24_MAGIC_NUMBER / base_rate - 2);
+
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_SET_LAYLA24_FREQUENCY_REG);
+ }
+
+ control_reg |= clock;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP ? */
+ chip->sample_rate = rate;
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, control_reg));
+
+ return write_control_reg(chip, control_reg, FALSE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ u32 control_reg, clocks_from_dsp;
+
+ /* Mask off the clock select bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register) &
+ GML_CLOCK_CLEAR_MASK;
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ /* Pick the new clock */
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Layla24 clock to INTERNAL\n"));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ return set_sample_rate(chip, chip->sample_rate);
+ case ECHO_CLOCK_SPDIF:
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ control_reg |= GML_SPDIF_CLOCK;
+ /* Layla24 doesn't support 96KHz S/PDIF */
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ DE_ACT(("Set Layla24 clock to SPDIF\n"));
+ break;
+ case ECHO_CLOCK_WORD:
+ control_reg |= GML_WORD_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ DE_ACT(("Set Layla24 clock to WORD\n"));
+ break;
+ case ECHO_CLOCK_ADAT:
+ if (chip->digital_mode != DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ control_reg |= GML_ADAT_CLOCK;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ DE_ACT(("Set Layla24 clock to ADAT\n"));
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Layla24\n", clock));
+ return -EINVAL;
+ }
+
+ chip->input_clock = clock;
+ return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+/* Depending on what digital mode you want, Layla24 needs different ASICs
+loaded. This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, const struct firmware *asic)
+{
+ s8 *monitors;
+
+ /* Check to see if this is already loaded */
+ if (asic != chip->asic_code) {
+ monitors = kmalloc(MONITOR_ARRAY_SIZE, GFP_KERNEL);
+ if (! monitors)
+ return -ENOMEM;
+
+ memcpy(monitors, chip->comm_page->monitors, MONITOR_ARRAY_SIZE);
+ memset(chip->comm_page->monitors, ECHOGAIN_MUTED,
+ MONITOR_ARRAY_SIZE);
+
+ /* Load the desired ASIC */
+ if (load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+ asic) < 0) {
+ memcpy(chip->comm_page->monitors, monitors,
+ MONITOR_ARRAY_SIZE);
+ kfree(monitors);
+ return -EIO;
+ }
+ chip->asic_code = asic;
+ memcpy(chip->comm_page->monitors, monitors, MONITOR_ARRAY_SIZE);
+ kfree(monitors);
+ }
+
+ return 0;
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u32 control_reg;
+ int err, incompatible_clock;
+ const struct firmware *asic;
+
+ /* Set clock to "internal" if it's not compatible with the new mode */
+ incompatible_clock = FALSE;
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ case DIGITAL_MODE_SPDIF_RCA:
+ if (chip->input_clock == ECHO_CLOCK_ADAT)
+ incompatible_clock = TRUE;
+ asic = &card_fw[FW_LAYLA24_2S_ASIC];
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ incompatible_clock = TRUE;
+ asic = &card_fw[FW_LAYLA24_2A_ASIC];
+ break;
+ default:
+ DE_ACT(("Digital mode not supported: %d\n", mode));
+ return -EINVAL;
+ }
+
+ if (incompatible_clock) { /* Switch to 48KHz, internal */
+ chip->sample_rate = 48000;
+ spin_lock_irq(&chip->lock);
+ set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+ spin_unlock_irq(&chip->lock);
+ }
+
+ /* switch_asic() can sleep */
+ if (switch_asic(chip, asic) < 0)
+ return -EIO;
+
+ spin_lock_irq(&chip->lock);
+
+ /* Tweak the control register */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ control_reg |= GML_SPDIF_OPTICAL_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_RCA:
+ /* GML_SPDIF_OPTICAL_MODE bit cleared */
+ break;
+ case DIGITAL_MODE_ADAT:
+ control_reg |= GML_ADAT_MODE;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ }
+
+ err = write_control_reg(chip, control_reg, TRUE);
+ spin_unlock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ chip->digital_mode = mode;
+
+ DE_ACT(("set_digital_mode to %d\n", mode));
+ return incompatible_clock;
+}
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
new file mode 100644
index 0000000..be40c64
--- /dev/null
+++ b/sound/pci/echoaudio/mia.c
@@ -0,0 +1,117 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_MIA
+#define ECHOCARD_NAME "Mia"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_VMIXER
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT FALSE
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+#define ECHOCARD_HAS_MIDI
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 8 */
+#define PX_DIGITAL_OUT 8 /* 0 */
+#define PX_ANALOG_IN 8 /* 2 */
+#define PX_DIGITAL_IN 10 /* 2 */
+#define PX_NUM 12
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 2 */
+#define BX_DIGITAL_OUT 2 /* 2 */
+#define BX_ANALOG_IN 4 /* 2 */
+#define BX_DIGITAL_IN 6 /* 2 */
+#define BX_NUM 8
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_MIA_DSP 1
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "mia_dsp.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x3410, 0xECC0, 0x0080, 0, 0, 0}, /* DSP 56361 Mia rev.0 */
+ {0x1057, 0x3410, 0xECC0, 0x0081, 0, 0, 0}, /* DSP 56361 Mia rev.1 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 8000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "mia_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"
+#include "midi.c"
diff --git a/sound/pci/echoaudio/mia_dsp.c b/sound/pci/echoaudio/mia_dsp.c
new file mode 100644
index 0000000..891c705
--- /dev/null
+++ b/sound/pci/echoaudio/mia_dsp.c
@@ -0,0 +1,229 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int update_flags(struct echoaudio *chip);
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain);
+static int update_vmixer_level(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Mia\n"));
+ snd_assert((subdevice_id & 0xfff0) == MIA, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->dsp_code_to_load = &card_fw[FW_MIA_DSP];
+ /* Since this card has no ASIC, mark it as loaded so everything
+ works OK */
+ chip->asic_loaded = TRUE;
+ if ((subdevice_id & 0x0000f) == MIA_MIDI_REV)
+ chip->has_midi = TRUE;
+ chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL |
+ ECHO_CLOCK_BIT_SPDIF;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)))
+ return err;
+
+ /* Default routing of the virtual channels: vchannels 0-3 go to analog
+ outputs and vchannels 4-7 go to S/PDIF outputs */
+ set_vmixer_gain(chip, 0, 0, 0);
+ set_vmixer_gain(chip, 1, 1, 0);
+ set_vmixer_gain(chip, 0, 2, 0);
+ set_vmixer_gain(chip, 1, 3, 0);
+ set_vmixer_gain(chip, 2, 4, 0);
+ set_vmixer_gain(chip, 3, 5, 0);
+ set_vmixer_gain(chip, 2, 6, 0);
+ set_vmixer_gain(chip, 3, 7, 0);
+ err = update_vmixer_level(chip);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ return clock_bits;
+}
+
+
+
+/* The Mia has no ASIC. Just do nothing */
+static int load_asic(struct echoaudio *chip)
+{
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg;
+
+ switch (rate) {
+ case 96000:
+ control_reg = MIA_96000;
+ break;
+ case 88200:
+ control_reg = MIA_88200;
+ break;
+ case 48000:
+ control_reg = MIA_48000;
+ break;
+ case 44100:
+ control_reg = MIA_44100;
+ break;
+ case 32000:
+ control_reg = MIA_32000;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+ return -EINVAL;
+ }
+
+ /* Override the clock setting if this Mia is set to S/PDIF clock */
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ control_reg |= MIA_SPDIF;
+
+ /* Set the control register if it has changed */
+ if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->comm_page->control_register = cpu_to_le32(control_reg);
+ chip->sample_rate = rate;
+
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
+ }
+ return 0;
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ DE_ACT(("set_input_clock(%d)\n", clock));
+ snd_assert(clock == ECHO_CLOCK_INTERNAL || clock == ECHO_CLOCK_SPDIF,
+ return -EINVAL);
+
+ chip->input_clock = clock;
+ return set_sample_rate(chip, chip->sample_rate);
+}
+
+
+
+/* This function routes the sound from a virtual channel to a real output */
+static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
+ int gain)
+{
+ int index;
+
+ snd_assert(pipe < num_pipes_out(chip) &&
+ output < num_busses_out(chip), return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ chip->vmixer_gain[output][pipe] = gain;
+ index = output * num_pipes_out(chip) + pipe;
+ chip->comm_page->vmixer[index] = gain;
+
+ DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
+ return 0;
+}
+
+
+
+/* Tell the DSP to read and update virtual mixer levels in comm page. */
+static int update_vmixer_level(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
+}
+
+
+
+/* Tell the DSP to reread the flags from the comm page */
+static int update_flags(struct echoaudio *chip)
+{
+ if (wait_handshake(chip))
+ return -EIO;
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+ DE_ACT(("set_professional_spdif %d\n", prof));
+ if (prof)
+ chip->comm_page->flags |=
+ __constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+ else
+ chip->comm_page->flags &=
+ ~__constant_cpu_to_le32(DSP_FLAG_PROFESSIONAL_SPDIF);
+ chip->professional_spdif = prof;
+ return update_flags(chip);
+}
+
diff --git a/sound/pci/echoaudio/midi.c b/sound/pci/echoaudio/midi.c
new file mode 100644
index 0000000..5919b5c
--- /dev/null
+++ b/sound/pci/echoaudio/midi.c
@@ -0,0 +1,327 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+/******************************************************************************
+ MIDI lowlevel code
+******************************************************************************/
+
+/* Start and stop Midi input */
+static int enable_midi_input(struct echoaudio *chip, char enable)
+{
+ DE_MID(("enable_midi_input(%d)\n", enable));
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ if (enable) {
+ chip->mtc_state = MIDI_IN_STATE_NORMAL;
+ chip->comm_page->flags |=
+ _constant_cpu_to_le32(DSP_FLAG_MIDI_INPUT);
+ } else
+ chip->comm_page->flags &=
+ ~__constant_cpu_to_le32(DSP_FLAG_MIDI_INPUT);
+
+ clear_handshake(chip);
+ return send_vector(chip, DSP_VC_UPDATE_FLAGS);
+}
+
+
+
+/* Send a buffer full of MIDI data to the DSP
+Returns how many actually written or < 0 on error */
+static int write_midi(struct echoaudio *chip, u8 *data, int bytes)
+{
+ snd_assert(bytes > 0 && bytes < MIDI_OUT_BUFFER_SIZE, return -EINVAL);
+
+ if (wait_handshake(chip))
+ return -EIO;
+
+ /* HF4 indicates that it is safe to write MIDI output data */
+ if (! (get_dsp_register(chip, CHI32_STATUS_REG) & CHI32_STATUS_REG_HF4))
+ return 0;
+
+ chip->comm_page->midi_output[0] = bytes;
+ memcpy(&chip->comm_page->midi_output[1], data, bytes);
+ chip->comm_page->midi_out_free_count = 0;
+ clear_handshake(chip);
+ send_vector(chip, DSP_VC_MIDI_WRITE);
+ DE_MID(("write_midi: %d\n", bytes));
+ return bytes;
+}
+
+
+
+/* Run the state machine for MIDI input data
+MIDI time code sync isn't supported by this code right now, but you still need
+this state machine to parse the incoming MIDI data stream. Every time the DSP
+sees a 0xF1 byte come in, it adds the DSP sample position to the MIDI data
+stream. The DSP sample position is represented as a 32 bit unsigned value,
+with the high 16 bits first, followed by the low 16 bits. Since these aren't
+real MIDI bytes, the following logic is needed to skip them. */
+static inline int mtc_process_data(struct echoaudio *chip, short midi_byte)
+{
+ switch (chip->mtc_state) {
+ case MIDI_IN_STATE_NORMAL:
+ if (midi_byte == 0xF1)
+ chip->mtc_state = MIDI_IN_STATE_TS_HIGH;
+ break;
+ case MIDI_IN_STATE_TS_HIGH:
+ chip->mtc_state = MIDI_IN_STATE_TS_LOW;
+ return MIDI_IN_SKIP_DATA;
+ break;
+ case MIDI_IN_STATE_TS_LOW:
+ chip->mtc_state = MIDI_IN_STATE_F1_DATA;
+ return MIDI_IN_SKIP_DATA;
+ break;
+ case MIDI_IN_STATE_F1_DATA:
+ chip->mtc_state = MIDI_IN_STATE_NORMAL;
+ break;
+ }
+ return 0;
+}
+
+
+
+/* This function is called from the IRQ handler and it reads the midi data
+from the DSP's buffer. It returns the number of bytes received. */
+static int midi_service_irq(struct echoaudio *chip)
+{
+ short int count, midi_byte, i, received;
+
+ /* The count is at index 0, followed by actual data */
+ count = le16_to_cpu(chip->comm_page->midi_input[0]);
+
+ snd_assert(count < MIDI_IN_BUFFER_SIZE, return 0);
+
+ /* Get the MIDI data from the comm page */
+ i = 1;
+ received = 0;
+ for (i = 1; i <= count; i++) {
+ /* Get the MIDI byte */
+ midi_byte = le16_to_cpu(chip->comm_page->midi_input[i]);
+
+ /* Parse the incoming MIDI stream. The incoming MIDI data
+ consists of MIDI bytes and timestamps for the MIDI time code
+ 0xF1 bytes. mtc_process_data() is a little state machine that
+ parses the stream. If you get MIDI_IN_SKIP_DATA back, then
+ this is a timestamp byte, not a MIDI byte, so don't store it
+ in the MIDI input buffer. */
+ if (mtc_process_data(chip, midi_byte) == MIDI_IN_SKIP_DATA)
+ continue;
+
+ chip->midi_buffer[received++] = (u8)midi_byte;
+ }
+
+ return received;
+}
+
+
+
+
+/******************************************************************************
+ MIDI interface
+******************************************************************************/
+
+static int snd_echo_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+ struct echoaudio *chip = substream->rmidi->private_data;
+
+ chip->midi_in = substream;
+ DE_MID(("rawmidi_iopen\n"));
+ return 0;
+}
+
+
+
+static void snd_echo_midi_input_trigger(struct snd_rawmidi_substream *substream,
+ int up)
+{
+ struct echoaudio *chip = substream->rmidi->private_data;
+
+ if (up != chip->midi_input_enabled) {
+ spin_lock_irq(&chip->lock);
+ enable_midi_input(chip, up);
+ spin_unlock_irq(&chip->lock);
+ chip->midi_input_enabled = up;
+ }
+}
+
+
+
+static int snd_echo_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+ struct echoaudio *chip = substream->rmidi->private_data;
+
+ chip->midi_in = NULL;
+ DE_MID(("rawmidi_iclose\n"));
+ return 0;
+}
+
+
+
+static int snd_echo_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+ struct echoaudio *chip = substream->rmidi->private_data;
+
+ chip->tinuse = 0;
+ chip->midi_full = 0;
+ chip->midi_out = substream;
+ DE_MID(("rawmidi_oopen\n"));
+ return 0;
+}
+
+
+
+static void snd_echo_midi_output_write(unsigned long data)
+{
+ struct echoaudio *chip = (struct echoaudio *)data;
+ unsigned long flags;
+ int bytes, sent, time;
+ unsigned char buf[MIDI_OUT_BUFFER_SIZE - 1];
+
+ DE_MID(("snd_echo_midi_output_write\n"));
+ /* No interrupts are involved: we have to check at regular intervals
+ if the card's output buffer has room for new data. */
+ sent = bytes = 0;
+ spin_lock_irqsave(&chip->lock, flags);
+ chip->midi_full = 0;
+ if (chip->midi_out && !snd_rawmidi_transmit_empty(chip->midi_out)) {
+ bytes = snd_rawmidi_transmit_peek(chip->midi_out, buf,
+ MIDI_OUT_BUFFER_SIZE - 1);
+ DE_MID(("Try to send %d bytes...\n", bytes));
+ sent = write_midi(chip, buf, bytes);
+ if (sent < 0) {
+ snd_printk(KERN_ERR "write_midi() error %d\n", sent);
+ /* retry later */
+ sent = 9000;
+ chip->midi_full = 1;
+ } else if (sent > 0) {
+ DE_MID(("%d bytes sent\n", sent));
+ snd_rawmidi_transmit_ack(chip->midi_out, sent);
+ } else {
+ /* Buffer is full. DSP's internal buffer is 64 (128 ?)
+ bytes long. Let's wait until half of them are sent */
+ DE_MID(("Full\n"));
+ sent = 32;
+ chip->midi_full = 1;
+ }
+ }
+
+ /* We restart the timer only if there is some data left to send */
+ if (!snd_rawmidi_transmit_empty(chip->midi_out) && chip->tinuse) {
+ /* The timer will expire slightly after the data has been
+ sent */
+ time = (sent << 3) / 25 + 1; /* 8/25=0.32ms to send a byte */
+ mod_timer(&chip->timer, jiffies + (time * HZ + 999) / 1000);
+ DE_MID(("Timer armed(%d)\n", ((time * HZ + 999) / 1000)));
+ }
+ spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+
+
+static void snd_echo_midi_output_trigger(struct snd_rawmidi_substream *substream,
+ int up)
+{
+ struct echoaudio *chip = substream->rmidi->private_data;
+
+ DE_MID(("snd_echo_midi_output_trigger(%d)\n", up));
+ spin_lock_irq(&chip->lock);
+ if (up) {
+ if (!chip->tinuse) {
+ init_timer(&chip->timer);
+ chip->timer.function = snd_echo_midi_output_write;
+ chip->timer.data = (unsigned long)chip;
+ chip->tinuse = 1;
+ }
+ } else {
+ if (chip->tinuse) {
+ del_timer(&chip->timer);
+ chip->tinuse = 0;
+ DE_MID(("Timer removed\n"));
+ }
+ }
+ spin_unlock_irq(&chip->lock);
+
+ if (up && !chip->midi_full)
+ snd_echo_midi_output_write((unsigned long)chip);
+}
+
+
+
+static int snd_echo_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+ struct echoaudio *chip = substream->rmidi->private_data;
+
+ chip->midi_out = NULL;
+ DE_MID(("rawmidi_oclose\n"));
+ return 0;
+}
+
+
+
+static struct snd_rawmidi_ops snd_echo_midi_input = {
+ .open = snd_echo_midi_input_open,
+ .close = snd_echo_midi_input_close,
+ .trigger = snd_echo_midi_input_trigger,
+};
+
+static struct snd_rawmidi_ops snd_echo_midi_output = {
+ .open = snd_echo_midi_output_open,
+ .close = snd_echo_midi_output_close,
+ .trigger = snd_echo_midi_output_trigger,
+};
+
+
+
+/* <--snd_echo_probe() */
+static int __devinit snd_echo_midi_create(struct snd_card *card,
+ struct echoaudio *chip)
+{
+ int err;
+
+ if ((err = snd_rawmidi_new(card, card->shortname, 0, 1, 1,
+ &chip->rmidi)) < 0)
+ return err;
+
+ strcpy(chip->rmidi->name, card->shortname);
+ chip->rmidi->private_data = chip;
+
+ snd_rawmidi_set_ops(chip->rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+ &snd_echo_midi_input);
+ snd_rawmidi_set_ops(chip->rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+ &snd_echo_midi_output);
+
+ chip->rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT |
+ SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX;
+ DE_INIT(("MIDI ok\n"));
+ return 0;
+}
diff --git a/sound/pci/echoaudio/mona.c b/sound/pci/echoaudio/mona.c
new file mode 100644
index 0000000..5dc512a
--- /dev/null
+++ b/sound/pci/echoaudio/mona.c
@@ -0,0 +1,129 @@
+/*
+ * ALSA driver for Echoaudio soundcards.
+ * Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define ECHO24_FAMILY
+#define ECHOCARD_MONA
+#define ECHOCARD_NAME "Mona"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_ASIC
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+#define ECHOCARD_HAS_DIGITAL_IO
+#define ECHOCARD_HAS_DIGITAL_IN_AUTOMUTE
+#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_ADAT 6
+#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT 0 /* 6 */
+#define PX_DIGITAL_OUT 6 /* 8 */
+#define PX_ANALOG_IN 14 /* 4 */
+#define PX_DIGITAL_IN 18 /* 8 */
+#define PX_NUM 26
+
+/* Bus indexes */
+#define BX_ANALOG_OUT 0 /* 6 */
+#define BX_DIGITAL_OUT 6 /* 8 */
+#define BX_ANALOG_IN 14 /* 4 */
+#define BX_DIGITAL_IN 18 /* 8 */
+#define BX_NUM 26
+
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include "echoaudio.h"
+
+#define FW_361_LOADER 0
+#define FW_MONA_301_DSP 1
+#define FW_MONA_361_DSP 2
+#define FW_MONA_301_1_ASIC48 3
+#define FW_MONA_301_1_ASIC96 4
+#define FW_MONA_361_1_ASIC48 5
+#define FW_MONA_361_1_ASIC96 6
+#define FW_MONA_2_ASIC 7
+
+static const struct firmware card_fw[] = {
+ {0, "loader_dsp.fw"},
+ {0, "mona_301_dsp.fw"},
+ {0, "mona_361_dsp.fw"},
+ {0, "mona_301_1_asic_48.fw"},
+ {0, "mona_301_1_asic_96.fw"},
+ {0, "mona_361_1_asic_48.fw"},
+ {0, "mona_361_1_asic_96.fw"},
+ {0, "mona_2_asic.fw"}
+};
+
+static struct pci_device_id snd_echo_ids[] = {
+ {0x1057, 0x1801, 0xECC0, 0x0070, 0, 0, 0}, /* DSP 56301 Mona rev.0 */
+ {0x1057, 0x1801, 0xECC0, 0x0071, 0, 0, 0}, /* DSP 56301 Mona rev.1 */
+ {0x1057, 0x1801, 0xECC0, 0x0072, 0, 0, 0}, /* DSP 56301 Mona rev.2 */
+ {0x1057, 0x3410, 0xECC0, 0x0070, 0, 0, 0}, /* DSP 56361 Mona rev.0 */
+ {0x1057, 0x3410, 0xECC0, 0x0071, 0, 0, 0}, /* DSP 56361 Mona rev.1 */
+ {0x1057, 0x3410, 0xECC0, 0x0072, 0, 0, 0}, /* DSP 56361 Mona rev.2 */
+ {0,}
+};
+
+static struct snd_pcm_hardware pcm_hardware_skel = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_SYNC_START,
+ .formats = SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_3LE |
+ SNDRV_PCM_FMTBIT_S32_LE |
+ SNDRV_PCM_FMTBIT_S32_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000,
+ .rate_min = 8000,
+ .rate_max = 96000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = 262144,
+ .period_bytes_min = 32,
+ .period_bytes_max = 131072,
+ .periods_min = 2,
+ .periods_max = 220,
+ /* One page (4k) contains 512 instructions. I don't know if the hw
+ supports lists longer than this. In this case periods_max=220 is a
+ safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "mona_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio_gml.c"
+#include "echoaudio.c"
diff --git a/sound/pci/echoaudio/mona_dsp.c b/sound/pci/echoaudio/mona_dsp.c
new file mode 100644
index 0000000..c0b4bf0
--- /dev/null
+++ b/sound/pci/echoaudio/mona_dsp.c
@@ -0,0 +1,428 @@
+/****************************************************************************
+
+ Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+ All rights reserved
+ www.echoaudio.com
+
+ This file is part of Echo Digital Audio's generic driver library.
+
+ Echo Digital Audio's generic driver library is free software;
+ you can redistribute it and/or modify it under the terms of
+ the GNU General Public License as published by the Free Software
+ Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ MA 02111-1307, USA.
+
+ *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+ const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+ int err;
+
+ DE_INIT(("init_hw() - Mona\n"));
+ snd_assert((subdevice_id & 0xfff0) == MONA, return -ENODEV);
+
+ if ((err = init_dsp_comm_page(chip))) {
+ DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+ return err;
+ }
+
+ chip->device_id = device_id;
+ chip->subdevice_id = subdevice_id;
+ chip->bad_board = TRUE;
+ chip->input_clock_types =
+ ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+ ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+ chip->digital_modes =
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+ ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+ ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+
+ /* Mona comes in both '301 and '361 flavors */
+ if (chip->device_id == DEVICE_ID_56361)
+ chip->dsp_code_to_load = &card_fw[FW_MONA_361_DSP];
+ else
+ chip->dsp_code_to_load = &card_fw[FW_MONA_301_DSP];
+
+ chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;
+ chip->professional_spdif = FALSE;
+ chip->digital_in_automute = TRUE;
+
+ if ((err = load_firmware(chip)) < 0)
+ return err;
+ chip->bad_board = FALSE;
+
+ if ((err = init_line_levels(chip)) < 0)
+ return err;
+
+ err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+ snd_assert(err >= 0, return err);
+ err = set_professional_spdif(chip, TRUE);
+
+ DE_INIT(("init_hw done\n"));
+ return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+ u32 clocks_from_dsp, clock_bits;
+
+ /* Map the DSP clock detect bits to the generic driver clock
+ detect bits */
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+ clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+ clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+ clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+ return clock_bits;
+}
+
+
+
+/* Mona has an ASIC on the PCI card and another ASIC in the external box;
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+ u32 control_reg;
+ int err;
+ const struct firmware *asic;
+
+ if (chip->asic_loaded)
+ return 0;
+
+ mdelay(10);
+
+ if (chip->device_id == DEVICE_ID_56361)
+ asic = &card_fw[FW_MONA_361_1_ASIC48];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC48];
+
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC, asic);
+ if (err < 0)
+ return err;
+
+ chip->asic_code = asic;
+ mdelay(10);
+
+ /* Do the external one */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_EXTERNAL_ASIC,
+ &card_fw[FW_MONA_2_ASIC]);
+ if (err < 0)
+ return err;
+
+ mdelay(10);
+ err = check_asic_status(chip);
+
+ /* Set up the control register if the load succeeded -
+ 48 kHz, internal clock, S/PDIF RCA mode */
+ if (!err) {
+ control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
+ err = write_control_reg(chip, control_reg, TRUE);
+ }
+
+ return err;
+}
+
+
+
+/* Depending on what digital mode you want, Mona needs different ASICs
+loaded. This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, char double_speed)
+{
+ const struct firmware *asic;
+ int err;
+
+ /* Check the clock detect bits to see if this is
+ a single-speed clock or a double-speed clock; load
+ a new ASIC if necessary. */
+ if (chip->device_id == DEVICE_ID_56361) {
+ if (double_speed)
+ asic = &card_fw[FW_MONA_361_1_ASIC96];
+ else
+ asic = &card_fw[FW_MONA_361_1_ASIC48];
+ } else {
+ if (double_speed)
+ asic = &card_fw[FW_MONA_301_1_ASIC96];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC48];
+ }
+
+ if (asic != chip->asic_code) {
+ /* Load the desired ASIC */
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+ asic);
+ if (err < 0)
+ return err;
+ chip->asic_code = asic;
+ }
+
+ return 0;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+ u32 control_reg, clock;
+ const struct firmware *asic;
+ char force_write;
+
+ /* Only set the clock for internal mode. */
+ if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+ DE_ACT(("set_sample_rate: Cannot set sample rate - "
+ "clock not set to CLK_CLOCKININTERNAL\n"));
+ /* Save the rate anyhow */
+ chip->comm_page->sample_rate = cpu_to_le32(rate);
+ chip->sample_rate = rate;
+ return 0;
+ }
+
+ /* Now, check to see if the required ASIC is loaded */
+ if (rate >= 88200) {
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EINVAL;
+ if (chip->device_id == DEVICE_ID_56361)
+ asic = &card_fw[FW_MONA_361_1_ASIC96];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC96];
+ } else {
+ if (chip->device_id == DEVICE_ID_56361)
+ asic = &card_fw[FW_MONA_361_1_ASIC48];
+ else
+ asic = &card_fw[FW_MONA_301_1_ASIC48];
+ }
+
+ force_write = 0;
+ if (asic != chip->asic_code) {
+ int err;
+ /* Load the desired ASIC (load_asic_generic() can sleep) */
+ spin_unlock_irq(&chip->lock);
+ err = load_asic_generic(chip, DSP_FNC_LOAD_MONA_PCI_CARD_ASIC,
+ asic);
+ spin_lock_irq(&chip->lock);
+
+ if (err < 0)
+ return err;
+ chip->asic_code = asic;
+ force_write = 1;
+ }
+
+ /* Compute the new control register value */
+ clock = 0;
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_CLOCK_CLEAR_MASK;
+ control_reg &= GML_SPDIF_RATE_CLEAR_MASK;
+
+ switch (rate) {
+ case 96000:
+ clock = GML_96KHZ;
+ break;
+ case 88200:
+ clock = GML_88KHZ;
+ break;
+ case 48000:
+ clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 44100:
+ clock = GML_44KHZ;
+ /* Professional mode */
+ if (control_reg & GML_SPDIF_PRO_MODE)
+ clock |= GML_SPDIF_SAMPLE_RATE0;
+ break;
+ case 32000:
+ clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+ GML_SPDIF_SAMPLE_RATE1;
+ break;
+ case 22050:
+ clock = GML_22KHZ;
+ break;
+ case 16000:
+ clock = GML_16KHZ;
+ break;
+ case 11025:
+ clock = GML_11KHZ;
+ break;
+ case 8000:
+ clock = GML_8KHZ;
+ break;
+ default:
+ DE_ACT(("set_sample_rate: %d invalid!\n", rate));
+ return -EINVAL;
+ }
+
+ control_reg |= clock;
+
+ chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
+ chip->sample_rate = rate;
+ DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));
+
+ return write_control_reg(chip, control_reg, force_write);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+ u32 control_reg, clocks_from_dsp;
+ int err;
+
+ DE_ACT(("set_input_clock:\n"));
+
+ /* Prevent two simultaneous calls to switch_asic() */
+ if (atomic_read(&chip->opencount))
+ return -EAGAIN;
+
+ /* Mask off the clock select bits */
+ control_reg = le32_to_cpu(chip->comm_page->control_register) &
+ GML_CLOCK_CLEAR_MASK;
+ clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+ switch (clock) {
+ case ECHO_CLOCK_INTERNAL:
+ DE_ACT(("Set Mona clock to INTERNAL\n"));
+ chip->input_clock = ECHO_CLOCK_INTERNAL;
+ return set_sample_rate(chip, chip->sample_rate);
+ case ECHO_CLOCK_SPDIF:
+ if (chip->digital_mode == DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ spin_unlock_irq(&chip->lock);
+ err = switch_asic(chip, clocks_from_dsp &
+ GML_CLOCK_DETECT_BIT_SPDIF96);
+ spin_lock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ DE_ACT(("Set Mona clock to SPDIF\n"));
+ control_reg |= GML_SPDIF_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_WORD:
+ DE_ACT(("Set Mona clock to WORD\n"));
+ spin_unlock_irq(&chip->lock);
+ err = switch_asic(chip, clocks_from_dsp &
+ GML_CLOCK_DETECT_BIT_WORD96);
+ spin_lock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ control_reg |= GML_WORD_CLOCK;
+ if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+ control_reg |= GML_DOUBLE_SPEED_MODE;
+ else
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ case ECHO_CLOCK_ADAT:
+ DE_ACT(("Set Mona clock to ADAT\n"));
+ if (chip->digital_mode != DIGITAL_MODE_ADAT)
+ return -EAGAIN;
+ control_reg |= GML_ADAT_CLOCK;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ default:
+ DE_ACT(("Input clock 0x%x not supported for Mona\n", clock));
+ return -EINVAL;
+ }
+
+ chip->input_clock = clock;
+ return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+ u32 control_reg;
+ int err, incompatible_clock;
+
+ /* Set clock to "internal" if it's not compatible with the new mode */
+ incompatible_clock = FALSE;
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ case DIGITAL_MODE_SPDIF_RCA:
+ if (chip->input_clock == ECHO_CLOCK_ADAT)
+ incompatible_clock = TRUE;
+ break;
+ case DIGITAL_MODE_ADAT:
+ if (chip->input_clock == ECHO_CLOCK_SPDIF)
+ incompatible_clock = TRUE;
+ break;
+ default:
+ DE_ACT(("Digital mode not supported: %d\n", mode));
+ return -EINVAL;
+ }
+
+ spin_lock_irq(&chip->lock);
+
+ if (incompatible_clock) { /* Switch to 48KHz, internal */
+ chip->sample_rate = 48000;
+ set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+ }
+
+ /* Clear the current digital mode */
+ control_reg = le32_to_cpu(chip->comm_page->control_register);
+ control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+ /* Tweak the control reg */
+ switch (mode) {
+ case DIGITAL_MODE_SPDIF_OPTICAL:
+ control_reg |= GML_SPDIF_OPTICAL_MODE;
+ break;
+ case DIGITAL_MODE_SPDIF_RCA:
+ /* GML_SPDIF_OPTICAL_MODE bit cleared */
+ break;
+ case DIGITAL_MODE_ADAT:
+ /* If the current ASIC is the 96KHz ASIC, switch the ASIC
+ and set to 48 KHz */
+ if (chip->asic_code == &card_fw[FW_MONA_361_1_ASIC96] ||
+ chip->asic_code == &card_fw[FW_MONA_301_1_ASIC96]) {
+ set_sample_rate(chip, 48000);
+ }
+ control_reg |= GML_ADAT_MODE;
+ control_reg &= ~GML_DOUBLE_SPEED_MODE;
+ break;
+ }
+
+ err = write_control_reg(chip, control_reg, FALSE);
+ spin_unlock_irq(&chip->lock);
+ if (err < 0)
+ return err;
+ chip->digital_mode = mode;
+
+ DE_ACT(("set_digital_mode to %d\n", mode));
+ return incompatible_clock;
+}