diff --git a/.mailmap b/.mailmap
index a4806f0..9b0d026 100644
--- a/.mailmap
+++ b/.mailmap
@@ -68,6 +68,7 @@
 Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Mark Brown <broonie@sirena.org.uk>
@@ -111,3 +112,4 @@
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 2b5d561..c1eb41c 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -206,16 +206,3 @@
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c279158..196b8b9 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -32,7 +32,7 @@
       The Linux DRM layer contains code intended to support the needs
       of complex graphics devices, usually containing programmable
       pipelines well suited to 3D graphics acceleration.  Graphics
-      drivers in the kernel can make use of DRM functions to make
+      drivers in the kernel may make use of DRM functions to make
       tasks like memory management, interrupt handling and DMA easier,
       and provide a uniform interface to applications.
     </para>
@@ -57,10 +57,10 @@
       existing drivers.
     </para>
     <para>
-      First, we'll go over some typical driver initialization
+      First, we go over some typical driver initialization
       requirements, like setting up command buffers, creating an
       initial output configuration, and initializing core services.
-      Subsequent sections will cover core internals in more detail,
+      Subsequent sections cover core internals in more detail,
       providing implementation notes and examples.
     </para>
     <para>
@@ -74,7 +74,7 @@
     </para>
     <para>
       The core of every DRM driver is struct drm_driver.  Drivers
-      will typically statically initialize a drm_driver structure,
+      typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -88,8 +88,8 @@
     </para>
     <programlisting>
       static struct drm_driver driver = {
-	/* don't use mtrr's here, the Xserver or user space app should
-	 * deal with them for intel hardware.
+	/* Don't use MTRRs here; the Xserver or userspace app should
+	 * deal with them for Intel hardware.
 	 */
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
@@ -154,8 +154,8 @@
     </programlisting>
     <para>
       In the example above, taken from the i915 DRM driver, the driver
-      sets several flags indicating what core features it supports.
-      We'll go over the individual callbacks in later sections.  Since
+      sets several flags indicating what core features it supports;
+      we go over the individual callbacks in later sections.  Since
       flags indicate which features your driver supports to the DRM
       core, you need to set most of them prior to calling drm_init().  Some,
       like DRIVER_MODESET can be set later based on user supplied parameters,
@@ -203,8 +203,8 @@
 	<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
 	<listitem>
 	  <para>
-	    DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
-	    handler, DRIVER_IRQ_SHARED indicates whether the device &amp;
+	    DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
+	    handler.  DRIVER_IRQ_SHARED indicates whether the device &amp;
 	    handler support shared IRQs (note that this is required of
 	    PCI drivers).
 	  </para>
@@ -214,8 +214,8 @@
 	<term>DRIVER_DMA_QUEUE</term>
 	<listitem>
 	  <para>
-	    If the driver queues DMA requests and completes them
-	    asynchronously, this flag should be set.  Deprecated.
+	    Should be set if the driver queues DMA requests and completes them
+	    asynchronously.  Deprecated.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -238,7 +238,7 @@
     </variablelist>
     <para>
       In this specific case, the driver requires AGP and supports
-      IRQs.  DMA, as we'll see, is handled by device specific ioctls
+      IRQs.  DMA, as discussed later, is handled by device-specific ioctls
       in this case.  It also supports the kernel mode setting APIs, though
       unlike in the actual i915 driver source, this example unconditionally
       exports KMS capability.
@@ -269,36 +269,34 @@
       initial output configuration.
     </para>
     <para>
-      Note that the tasks performed at driver load time must not
-      conflict with DRM client requirements.  For instance, if user
+      If compatibility is a concern (e.g. with drivers converted over
+      to the new interfaces from the old ones), care must be taken to
+      prevent device initialization and control that is incompatible with
+      currently active userspace drivers.  For instance, if user
       level mode setting drivers are in use, it would be problematic
       to perform output discovery &amp; configuration at load time.
-      Likewise, if pre-memory management aware user level drivers are
+      Likewise, if user-level drivers unaware of memory management are
       in use, memory management and command buffer setup may need to
-      be omitted.  These requirements are driver specific, and care
+      be omitted.  These requirements are driver-specific, and care
       needs to be taken to keep both old and new applications and
       libraries working.  The i915 driver supports the "modeset"
       module parameter to control whether advanced features are
-      enabled at load time or in legacy fashion.  If compatibility is
-      a concern (e.g. with drivers converted over to the new interfaces
-      from the old ones), care must be taken to prevent incompatible
-      device initialization and control with the currently active
-      userspace drivers.
+      enabled at load time or in legacy fashion.
     </para>
 
     <sect2>
       <title>Driver private &amp; performance counters</title>
       <para>
 	The driver private hangs off the main drm_device structure and
-	can be used for tracking various device specific bits of
+	can be used for tracking various device-specific bits of
 	information, like register offsets, command buffer status,
 	register state for suspend/resume, etc.  At load time, a
-	driver can simply allocate one and set drm_device.dev_priv
-	appropriately; at unload the driver can free it and set
-	drm_device.dev_priv to NULL.
+	driver may simply allocate one and set drm_device.dev_priv
+	appropriately; it should be freed and drm_device.dev_priv set
+	to NULL when the driver is unloaded.
       </para>
       <para>
-	The DRM supports several counters which can be used for rough
+	The DRM supports several counters which may be used for rough
 	performance characterization.  Note that the DRM stat counter
 	system is not often used by applications, and supporting
 	additional counters is completely optional.
@@ -307,15 +305,15 @@
 	These interfaces are deprecated and should not be used.  If performance
 	monitoring is desired, the developer should investigate and
 	potentially enhance the kernel perf and tracing infrastructure to export
-	GPU related performance information to performance monitoring
-	tools and applications.
+	GPU related performance information for consumption by performance
+	monitoring tools and applications.
       </para>
     </sect2>
 
     <sect2>
       <title>Configuring the device</title>
       <para>
-	Obviously, device configuration will be device specific.
+	Obviously, device configuration is device-specific.
 	However, there are several common operations: finding a
 	device's PCI resources, mapping them, and potentially setting
 	up an IRQ handler.
@@ -323,10 +321,10 @@
       <para>
 	Finding &amp; mapping resources is fairly straightforward.  The
 	DRM wrapper functions, drm_get_resource_start() and
-	drm_get_resource_len() can be used to find BARs on the given
+	drm_get_resource_len(), may be used to find BARs on the given
 	drm_device struct.  Once those values have been retrieved, the
 	driver load function can call drm_addmap() to create a new
-	mapping for the BAR in question.  Note you'll probably want a
+	mapping for the BAR in question.  Note that you probably want a
 	drm_local_map_t in your driver private structure to track any
 	mappings you create.
 <!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
@@ -335,20 +333,20 @@
       <para>
 	if compatibility with other operating systems isn't a concern
 	(DRM drivers can run under various BSD variants and OpenSolaris),
-	native Linux calls can be used for the above, e.g. pci_resource_*
+	native Linux calls may be used for the above, e.g. pci_resource_*
 	and iomap*/iounmap.  See the Linux device driver book for more
 	info.
       </para>
       <para>
-	Once you have a register map, you can use the DRM_READn() and
+	Once you have a register map, you may use the DRM_READn() and
 	DRM_WRITEn() macros to access the registers on your device, or
-	use driver specific versions to offset into your MMIO space
-	relative to a driver specific base pointer (see I915_READ for
-	example).
+	use driver-specific versions to offset into your MMIO space
+	relative to a driver-specific base pointer (see I915_READ for
+	an example).
       </para>
       <para>
 	If your device supports interrupt generation, you may want to
-	setup an interrupt handler at driver load time as well.  This
+	set up an interrupt handler when the driver is loaded.  This
 	is done using the drm_irq_install() function.  If your device
 	supports vertical blank interrupts, it should call
 	drm_vblank_init() to initialize the core vblank handling code before
@@ -357,7 +355,7 @@
       </para>
 <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
       <para>
-	Once your interrupt handler is registered (it'll use your
+	Once your interrupt handler is registered (it uses your
 	drm_driver.irq_handler as the actual interrupt handling
 	function), you can safely enable interrupts on your device,
 	assuming any other state your interrupt handler uses is also
@@ -371,10 +369,10 @@
 	using the pci_map_rom() call, a convenience function that
 	takes care of mapping the actual ROM, whether it has been
 	shadowed into memory (typically at address 0xc0000) or exists
-	on the PCI device in the ROM BAR.  Note that once you've
-	mapped the ROM and extracted any necessary information, be
-	sure to unmap it; on many devices the ROM address decoder is
-	shared with other BARs, so leaving it mapped can cause
+	on the PCI device in the ROM BAR.  Note that after the ROM
+	has been mapped and any necessary information has been extracted,
+	it should be unmapped; on many devices, the ROM address decoder is
+	shared with other BARs, so leaving it mapped could cause
 	undesired behavior like hangs or memory corruption.
 <!--!Fdrivers/pci/rom.c pci_map_rom-->
       </para>
@@ -389,9 +387,9 @@
 	should support a memory manager.
       </para>
       <para>
-	If your driver supports memory management (it should!), you'll
+	If your driver supports memory management (it should!), you
 	need to set that up at load time as well.  How you initialize
-	it depends on which memory manager you're using, TTM or GEM.
+	it depends on which memory manager you're using: TTM or GEM.
       </para>
       <sect3>
 	<title>TTM initialization</title>
@@ -401,7 +399,7 @@
 	  and devices with dedicated video RAM (VRAM), i.e. most discrete
 	  graphics devices.  If your device has dedicated RAM, supporting
 	  TTM is desirable.  TTM also integrates tightly with your
-	  driver specific buffer execution function.  See the radeon
+	  driver-specific buffer execution function.  See the radeon
 	  driver for examples.
 	</para>
 	<para>
@@ -429,21 +427,21 @@
 	  created by the memory manager at runtime.  Your global TTM should
 	  have a type of TTM_GLOBAL_TTM_MEM.  The size field for the global
 	  object should be sizeof(struct ttm_mem_global), and the init and
-	  release hooks should point at your driver specific init and
-	  release routines, which will probably eventually call
-	  ttm_mem_global_init and ttm_mem_global_release respectively.
+	  release hooks should point at your driver-specific init and
+	  release routines, which probably eventually call
+	  ttm_mem_global_init and ttm_mem_global_release, respectively.
 	</para>
 	<para>
 	  Once your global TTM accounting structure is set up and initialized
-	  (done by calling ttm_global_item_ref on the global object you
-	  just created), you'll need to create a buffer object TTM to
+	  by calling ttm_global_item_ref() on it,
+	  you need to create a buffer object TTM to
 	  provide a pool for buffer object allocation by clients and the
 	  kernel itself.  The type of this object should be TTM_GLOBAL_TTM_BO,
 	  and its size should be sizeof(struct ttm_bo_global).  Again,
-	  driver specific init and release functions can be provided,
-	  likely eventually calling ttm_bo_global_init and
-	  ttm_bo_global_release, respectively.  Also like the previous
-	  object, ttm_global_item_ref is used to create an initial reference
+	  driver-specific init and release functions may be provided,
+	  likely eventually calling ttm_bo_global_init() and
+	  ttm_bo_global_release(), respectively.  Also, like the previous
+	  object, ttm_global_item_ref() is used to create an initial reference
 	  count for the TTM, which will call your initialization function.
 	</para>
       </sect3>
@@ -453,27 +451,26 @@
 	  GEM is an alternative to TTM, designed specifically for UMA
 	  devices.  It has simpler initialization and execution requirements
 	  than TTM, but has no VRAM management capability.  Core GEM
-	  initialization is comprised of a basic drm_mm_init call to create
+	  is initialized by calling drm_mm_init() to create
 	  a GTT DRM MM object, which provides an address space pool for
-	  object allocation.  In a KMS configuration, the driver will
-	  need to allocate and initialize a command ring buffer following
-	  basic GEM initialization.  Most UMA devices have a so-called
+	  object allocation.  In a KMS configuration, the driver
+	  needs to allocate and initialize a command ring buffer following
+	  core GEM initialization.  A UMA device usually has what is called a
 	  "stolen" memory region, which provides space for the initial
 	  framebuffer and large, contiguous memory regions required by the
-	  device.  This space is not typically managed by GEM, and must
+	  device.  This space is not typically managed by GEM, and it must
 	  be initialized separately into its own DRM MM object.
 	</para>
 	<para>
-	  Initialization will be driver specific, and will depend on
-	  the architecture of the device.  In the case of Intel
+	  Initialization is driver-specific. In the case of Intel
 	  integrated graphics chips like 965GM, GEM initialization can
 	  be done by calling the internal GEM init function,
 	  i915_gem_do_init().  Since the 965GM is a UMA device
-	  (i.e. it doesn't have dedicated VRAM), GEM will manage
+	  (i.e. it doesn't have dedicated VRAM), GEM manages
 	  making regular RAM available for GPU operations.  Memory set
 	  aside by the BIOS (called "stolen" memory by the i915
-	  driver) will be managed by the DRM memrange allocator; the
-	  rest of the aperture will be managed by GEM.
+	  driver) is managed by the DRM memrange allocator; the
+	  rest of the aperture is managed by GEM.
 	  <programlisting>
 	    /* Basic memrange allocator for stolen space (aka vram) */
 	    drm_memrange_init(&amp;dev_priv->vram, 0, prealloc_size);
@@ -483,7 +480,7 @@
 <!--!Edrivers/char/drm/drm_memrange.c-->
 	</para>
 	<para>
-	  Once the memory manager has been set up, we can allocate the
+	  Once the memory manager has been set up, we may allocate the
 	  command buffer.  In the i915 case, this is also done with a
 	  GEM function, i915_gem_init_ringbuffer().
 	</para>
@@ -493,16 +490,25 @@
     <sect2>
       <title>Output configuration</title>
       <para>
-	The final initialization task is output configuration.  This involves
-	finding and initializing the CRTCs, encoders and connectors
-	for your device, creating an initial configuration and
-	registering a framebuffer console driver.
+	The final initialization task is output configuration.  This involves:
+	<itemizedlist>
+	  <listitem>
+	    Finding and initializing the CRTCs, encoders, and connectors
+	    for the device.
+	  </listitem>
+	  <listitem>
+	    Creating an initial configuration.
+	  </listitem>
+	  <listitem>
+	    Registering a framebuffer console driver.
+	  </listitem>
+	</itemizedlist>
       </para>
       <sect3>
 	<title>Output discovery and initialization</title>
 	<para>
-	  Several core functions exist to create CRTCs, encoders and
-	  connectors, namely drm_crtc_init(), drm_connector_init() and
+	  Several core functions exist to create CRTCs, encoders, and
+	  connectors, namely: drm_crtc_init(), drm_connector_init(), and
 	  drm_encoder_init(), along with several "helper" functions to
 	  perform common tasks.
 	</para>
@@ -555,10 +561,10 @@
 	</programlisting>
 	<para>
 	  In the example above (again, taken from the i915 driver), a
-	  CRT connector and encoder combination is created.  A device
-	  specific i2c bus is also created, for fetching EDID data and
+	  CRT connector and encoder combination is created.  A device-specific
+	  i2c bus is also created for fetching EDID data and
 	  performing monitor detection.  Once the process is complete,
-	  the new connector is registered with sysfs, to make its
+	  the new connector is registered with sysfs to make its
 	  properties available to applications.
 	</para>
 	<sect4>
@@ -567,12 +573,12 @@
 	    Since many PC-class graphics devices have similar display output
 	    designs, the DRM provides a set of helper functions to make
 	    output management easier.  The core helper routines handle
-	    encoder re-routing and disabling of unused functions following
-	    mode set.  Using the helpers is optional, but recommended for
+	    encoder re-routing and the disabling of unused functions following
+	    mode setting.  Using the helpers is optional, but recommended for
 	    devices with PC-style architectures (i.e. a set of display planes
 	    for feeding pixels to encoders which are in turn routed to
 	    connectors).  Devices with more complex requirements needing
-	    finer grained management can opt to use the core callbacks
+	    finer grained management may opt to use the core callbacks
 	    directly.
 	  </para>
 	  <para>
@@ -580,17 +586,25 @@
 	  </para>
 	</sect4>
 	<para>
-	  For each encoder, CRTC and connector, several functions must
-	  be provided, depending on the object type.  Encoder objects
-	  need to provide a DPMS (basically on/off) function, mode fixup
-	  (for converting requested modes into native hardware timings),
-	  and prepare, set and commit functions for use by the core DRM
-	  helper functions.  Connector helpers need to provide mode fetch and
-	  validity functions as well as an encoder matching function for
-	  returning an ideal encoder for a given connector.  The core
-	  connector functions include a DPMS callback, (deprecated)
-	  save/restore routines, detection, mode probing, property handling,
-	  and cleanup functions.
+	  Each encoder object needs to provide:
+	  <itemizedlist>
+	    <listitem>
+	      A DPMS (basically on/off) function.
+	    </listitem>
+	    <listitem>
+	      A mode-fixup function (for converting requested modes into
+	      native hardware timings).
+	    </listitem>
+	    <listitem>
+	      Functions (prepare, set, and commit) for use by the core DRM
+	      helper functions.
+	    </listitem>
+	  </itemizedlist>
+	  Connector helpers need to provide functions (mode-fetch, validity,
+	  and encoder-matching) for returning an ideal encoder for a given
+	  connector.  The core connector functions include a DPMS callback,
+	  save/restore routines (deprecated), detection, mode probing,
+	  property handling, and cleanup functions.
 	</para>
 <!--!Edrivers/char/drm/drm_crtc.h-->
 <!--!Edrivers/char/drm/drm_crtc.c-->
@@ -605,23 +619,34 @@
     <title>VBlank event handling</title>
     <para>
       The DRM core exposes two vertical blank related ioctls:
-      DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+      <variablelist>
+        <varlistentry>
+          <term>DRM_IOCTL_WAIT_VBLANK</term>
+          <listitem>
+            <para>
+              This takes a struct drm_wait_vblank structure as its argument,
+              and it is used to block or request a signal when a specified
+              vblank event occurs.
+            </para>
+          </listitem>
+        </varlistentry>
+        <varlistentry>
+          <term>DRM_IOCTL_MODESET_CTL</term>
+          <listitem>
+            <para>
+              This should be called by application level drivers before and
+              after mode setting, since on many devices the vertical blank
+              counter is reset at that time.  Internally, the DRM snapshots
+              the last vblank count when the ioctl is called with the
+              _DRM_PRE_MODESET command, so that the counter won't go backwards
+              (which is dealt with when _DRM_POST_MODESET is used).
+            </para>
+          </listitem>
+        </varlistentry>
+      </variablelist>
 <!--!Edrivers/char/drm/drm_irq.c-->
     </para>
     <para>
-      DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
-      as its argument, and is used to block or request a signal when a
-      specified vblank event occurs.
-    </para>
-    <para>
-      DRM_IOCTL_MODESET_CTL should be called by application level
-      drivers before and after mode setting, since on many devices the
-      vertical blank counter will be reset at that time.  Internally,
-      the DRM snapshots the last vblank count when the ioctl is called
-      with the _DRM_PRE_MODESET command so that the counter won't go
-      backwards (which is dealt with when _DRM_POST_MODESET is used).
-    </para>
-    <para>
       To support the functions above, the DRM core provides several
       helper functions for tracking vertical blank counters, and
       requires drivers to provide several callbacks:
@@ -632,24 +657,24 @@
       register.  The enable and disable vblank callbacks should enable
       and disable vertical blank interrupts, respectively.  In the
       absence of DRM clients waiting on vblank events, the core DRM
-      code will use the disable_vblank() function to disable
-      interrupts, which saves power.  They'll be re-enabled again when
+      code uses the disable_vblank() function to disable
+      interrupts, which saves power.  They are re-enabled again when
       a client calls the vblank wait ioctl above.
     </para>
     <para>
-      Devices that don't provide a count register can simply use an
+      A device that doesn't provide a count register may simply use an
       internal atomic counter incremented on every vertical blank
-      interrupt, and can make their enable and disable vblank
-      functions into no-ops.
+      interrupt (and then treat the enable_vblank() and disable_vblank()
+      callbacks as no-ops).
     </para>
   </sect1>
 
   <sect1>
     <title>Memory management</title>
     <para>
-      The memory manager lies at the heart of many DRM operations, and
-      is also required to support advanced client features like OpenGL
-      pbuffers.  The DRM currently contains two memory managers, TTM
+      The memory manager lies at the heart of many DRM operations; it
+      is required to support advanced client features like OpenGL
+      pbuffers.  The DRM currently contains two memory managers: TTM
       and GEM.
     </para>
 
@@ -679,41 +704,46 @@
       <para>
 	GEM-enabled drivers must provide gem_init_object() and
 	gem_free_object() callbacks to support the core memory
-	allocation routines.  They should also provide several driver
-	specific ioctls to support command execution, pinning, buffer
+	allocation routines.  They should also provide several driver-specific
+	ioctls to support command execution, pinning, buffer
 	read &amp; write, mapping, and domain ownership transfers.
       </para>
       <para>
-	On a fundamental level, GEM involves several operations: memory
-	allocation and freeing, command execution, and aperture management
-	at command execution time.  Buffer object allocation is relatively
+	On a fundamental level, GEM involves several operations:
+	<itemizedlist>
+	  <listitem>Memory allocation and freeing</listitem>
+	  <listitem>Command execution</listitem>
+	  <listitem>Aperture management at command execution time</listitem>
+	</itemizedlist>
+	Buffer object allocation is relatively
 	straightforward and largely provided by Linux's shmem layer, which
 	provides memory to back each object.  When mapped into the GTT
 	or used in a command buffer, the backing pages for an object are
 	flushed to memory and marked write combined so as to be coherent
-	with the GPU.  Likewise, when the GPU finishes rendering to an object,
-	if the CPU accesses it, it must be made coherent with the CPU's view
+	with the GPU.  Likewise, if the CPU accesses an object after the GPU
+	has finished rendering to the object, then the object must be made
+	coherent with the CPU's view
 	of memory, usually involving GPU cache flushing of various kinds.
-	This core CPU&lt;-&gt;GPU coherency management is provided by the GEM
-	set domain function, which evaluates an object's current domain and
+	This core CPU&lt;-&gt;GPU coherency management is provided by a
+	device-specific ioctl, which evaluates an object's current domain and
 	performs any necessary flushing or synchronization to put the object
 	into the desired coherency domain (note that the object may be busy,
-	i.e. an active render target; in that case the set domain function
-	will block the client and wait for rendering to complete before
+	i.e. an active render target; in that case, setting the domain
+	blocks the client and waits for rendering to complete before
 	performing any necessary flushing operations).
       </para>
       <para>
 	Perhaps the most important GEM function is providing a command
 	execution interface to clients.  Client programs construct command
-	buffers containing references to previously allocated memory objects
-	and submit them to GEM.  At that point, GEM will take care to bind
+	buffers containing references to previously allocated memory objects,
+	and then submit them to GEM.  At that point, GEM takes care to bind
 	all the objects into the GTT, execute the buffer, and provide
 	necessary synchronization between clients accessing the same buffers.
 	This often involves evicting some objects from the GTT and re-binding
 	others (a fairly expensive operation), and providing relocation
 	support which hides fixed GTT offsets from clients.  Clients must
 	take care not to submit command buffers that reference more objects
-	than can fit in the GTT or GEM will reject them and no rendering
+	than can fit in the GTT; otherwise, GEM will reject them and no rendering
 	will occur.  Similarly, if several objects in the buffer require
 	fence registers to be allocated for correct rendering (e.g. 2D blits
 	on pre-965 chips), care must be taken not to require more fence
@@ -729,7 +759,7 @@
     <title>Output management</title>
     <para>
       At the core of the DRM output management code is a set of
-      structures representing CRTCs, encoders and connectors.
+      structures representing CRTCs, encoders, and connectors.
     </para>
     <para>
       A CRTC is an abstraction representing a part of the chip that
@@ -765,21 +795,19 @@
   <sect1>
     <title>Framebuffer management</title>
     <para>
-      In order to set a mode on a given CRTC, encoder and connector
-      configuration, clients need to provide a framebuffer object which
-      will provide a source of pixels for the CRTC to deliver to the encoder(s)
-      and ultimately the connector(s) in the configuration.  A framebuffer
-      is fundamentally a driver specific memory object, made into an opaque
-      handle by the DRM addfb function.  Once an fb has been created this
-      way it can be passed to the KMS mode setting routines for use in
-      a configuration.
+      Clients need to provide a framebuffer object which provides a source
+      of pixels for a CRTC to deliver to the encoder(s) and ultimately the
+      connector(s). A framebuffer is fundamentally a driver-specific memory
+      object, made into an opaque handle by the DRM's addfb() function.
+      Once a framebuffer has been created this way, it may be passed to the
+      KMS mode setting routines for use in a completed configuration.
     </para>
   </sect1>
 
   <sect1>
     <title>Command submission &amp; fencing</title>
     <para>
-      This should cover a few device specific command submission
+      This should cover a few device-specific command submission
       implementations.
     </para>
   </sect1>
@@ -789,7 +817,7 @@
     <para>
       The DRM core provides some suspend/resume code, but drivers
       wanting full suspend/resume support should provide save() and
-      restore() functions.  These will be called at suspend,
+      restore() functions.  These are called at suspend,
       hibernate, or resume time, and should perform any state save or
       restore required by your device across suspend or hibernate
       states.
@@ -812,8 +840,8 @@
     <para>
       The DRM core exports several interfaces to applications,
       generally intended to be used through corresponding libdrm
-      wrapper functions.  In addition, drivers export device specific
-      interfaces for use by userspace drivers &amp; device aware
+      wrapper functions.  In addition, drivers export device-specific
+      interfaces for use by userspace drivers &amp; device-aware
       applications through ioctls and sysfs files.
     </para>
     <para>
@@ -822,8 +850,8 @@
       management, memory management, and output management.
     </para>
     <para>
-      Cover generic ioctls and sysfs layout here.  Only need high
-      level info, since man pages will cover the rest.
+      Cover generic ioctls and sysfs layout here.  We only need high-level
+      info, since man pages should cover the rest.
     </para>
   </chapter>
 
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 54883de..ac3d001 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -521,6 +521,11 @@
 
 <itemizedlist>
 <listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
+<listitem><para>
 <varname>int memtype</varname>: Required if the mapping is used. Set this to
 <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
 card to be mapped. Use <varname>UIO_MEM_LOGICAL</varname> for logical
@@ -553,7 +558,7 @@
 </itemizedlist>
 
 <para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index 71464e0..b79d0a1 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -98,14 +98,12 @@
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
 
-Additionally, note that the driver will not engage the SCSI core at init 
-time.  The driver must be directed to dynamically engage the SCSI core via 
-the /proc filesystem entry which the "block" side of the driver creates as 
-/proc/driver/cciss/cciss* at runtime.  This is because at driver init time, 
-the SCSI core may not yet be initialized (because the driver is a block 
-driver) and attempting to register it with the SCSI core in such a case 
-would cause a hang.  This is best done via an initialization script 
-(typically in /etc/init.d, but could vary depending on distribution). 
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected.  The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime.  This is best done via a script.
+
 For example:
 
 	for x in /proc/driver/cciss/cciss[0-9]*
diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt
index c21d777..7e62de1 100644
--- a/Documentation/cgroups/freezer-subsystem.txt
+++ b/Documentation/cgroups/freezer-subsystem.txt
@@ -33,9 +33,9 @@
 
 	From a second, unrelated bash shell:
 	$ kill -SIGSTOP 16690
-	$ kill -SIGCONT 16990
+	$ kill -SIGCONT 16690
 
-	<at this point 16990 exits and causes 16644 to exit too>
+	<at this point 16690 exits and causes 16644 to exit too>
 
 This happens because bash can observe both signals and choose how it
 responds to them.
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses
index e989070..cdfe139 100644
--- a/Documentation/i2c/ten-bit-addresses
+++ b/Documentation/i2c/ten-bit-addresses
@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
+address 0x10 (though a single device could respond to both of them).
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
-can and will add proper support. Right now, 10 bit address devices
-are defined by the I2C protocol, but we have never seen a single device
-which supports them.
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index cb7f314..f049a1c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -20,7 +20,7 @@
 	default FALSE
 
 min_pmtu - INTEGER
-	default 562 - minimum discovered Path MTU
+	default 552 - minimum discovered Path MTU
 
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index 079cb3d..41c8378 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -97,15 +97,23 @@
 
 	struct serial_rs485 rs485conf;
 
-	/* Set RS485 mode: */
+	/* Enable RS485 mode: */
 	rs485conf.flags |= SER_RS485_ENABLED;
 
+	/* Set logical level for RTS pin equal to 1 when sending: */
+	rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+	/* or, set logical level for RTS pin equal to 0 when sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+	/* Set logical level for RTS pin equal to 1 after sending: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	/* or, set logical level for RTS pin equal to 0 after sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
 	/* Set rts delay before send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
 	rs485conf.delay_rts_before_send = ...;
 
 	/* Set rts delay after send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
 	/* Set this flag if you want to receive data even whilst sending data */
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 4f34432..edad99a 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -349,6 +349,7 @@
   ref		Reference board
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
+  dell-vostro-3500	Dell Vostro 3500 laptop
   hp		HP laptops with (inverted) mute-LED
   hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 03e2771..91fee3b 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -579,7 +579,7 @@
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:
 
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 
 The master branch or for-next branches can be used as the main
 development branches in general while the HD-audio specific patches
@@ -594,7 +594,7 @@
 install(-modules).  See INSTALL in the package.  The snapshot tarballs
 are found at:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
 
 
 Sending a Bug Report
@@ -696,7 +696,7 @@
 
 The hda-verb program is found in the ftp directory:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 Also a git repository is available:
 
@@ -764,7 +764,7 @@
 
 The package is found in:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 A git repository is available:
 
diff --git a/Kbuild b/Kbuild
index 4caab4f..b8b708a 100644
--- a/Kbuild
+++ b/Kbuild
@@ -92,7 +92,7 @@
 targets += missing-syscalls
 
 quiet_cmd_syscalls = CALL    $<
-      cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags)
+      cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
 
 missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
 	$(call cmd,syscalls)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4808256..3523ab0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1106,6 +1106,7 @@
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Kamil Debski <k.debski@samsung.com>
+M:     Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
@@ -1788,6 +1789,14 @@
 F:	net/wireless/*
 X:	net/wireless/wext*
 
+CHAR and MISC DRIVERS
+M:	Arnd Bergmann <arnd@arndb.de>
+M:	Greg Kroah-Hartman <greg@kroah.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
+S:	Maintained
+F:	drivers/char/*
+F:	drivers/misc/*
+
 CHECKPATCH
 M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
@@ -1926,9 +1935,11 @@
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-M:	Paul Menage <paul@paulmenage.org>
+M:	Tejun Heo <tj@kernel.org>
 M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
+L:	cgroups@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	include/linux/cgroup*
 F:	kernel/cgroup*
@@ -2342,6 +2353,13 @@
 F:	drivers/gpu/drm/i915
 F:	include/drm/i915*
 
+DRM DRIVERS FOR EXYNOS
+M:	Inki Dae <inki.dae@samsung.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Supported
+F:	drivers/gpu/drm/exynos
+F:	include/drm/exynos*
+
 DSCC4 DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -2576,7 +2594,7 @@
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3710,7 +3728,7 @@
 F:	include/linux/jbd2.h
 
 JSM Neo PCI based serial card
-M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+M:	Lucas Tavares <lucaskt@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/
@@ -4296,6 +4314,7 @@
 M:	Balbir Singh <bsingharora@gmail.com>
 M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
@@ -4329,7 +4348,7 @@
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 W:	http://www.linux-mips.org/
-T:	git git://git.linux-mips.org/pub/scm/linux.git
+T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
 F:	Documentation/mips/
@@ -4462,7 +4481,7 @@
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -4939,7 +4958,7 @@
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -5977,7 +5996,7 @@
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -6122,7 +6141,7 @@
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
@@ -7391,8 +7410,8 @@
 F:	arch/x86/kernel/cpu/mcheck/*
 
 XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
@@ -7425,7 +7444,8 @@
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Alex Elder <aelder@sgi.com>
+M:	Ben Myers <bpm@sgi.com>
+M:	Alex Elder <elder@kernel.org>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
diff --git a/Makefile b/Makefile
index 361e4f0..3a8f064 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 176062a..5df26a9 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -65,6 +65,8 @@
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
+clean-files := *.dtb
+
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
 		   -C none -a $(LOADADDR) -e $(STARTADDR) \
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index 9b29a62..3f9abd6b 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -22,11 +22,10 @@
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 
 	sdhci@c8000600 {
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		support-8bit;
 	};
 };
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 1db1143..7df239b 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_HARDWARE_L2X0_H
 #define __ASM_ARM_HARDWARE_L2X0_H
 
+#include <linux/errno.h>
+
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 7d19425..2b0efc3 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -13,6 +13,7 @@
 struct tag;
 struct meminfo;
 struct sys_timer;
+struct pt_regs;
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index c60a294..4a11237 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -402,6 +402,8 @@
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 #define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9943e9e..463ff4a 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -385,6 +385,8 @@
 		CALL(sys_syncfs)
 		CALL(sys_sendmmsg)
 /* 375 */	CALL(sys_setns)
+		CALL(sys_process_vm_readv)
+		CALL(sys_process_vm_writev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 566c54c..08c82fd 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -360,7 +360,7 @@
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index c1b4463..e59bbd4 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -32,24 +32,6 @@
 
 int machine_kexec_prepare(struct kimage *image)
 {
-	unsigned long page_list;
-	void *reboot_code_buffer;
-	page_list = image->head & PAGE_MASK;
-
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	return 0;
 }
 
@@ -100,14 +82,31 @@
 
 void machine_kexec(struct kimage *image)
 {
+	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+
+	page_list = image->head & PAGE_MASK;
+
 	/* we need both effective and real address here */
 	reboot_code_buffer_phys =
 	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 7e7977a..3448a3f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -461,8 +461,10 @@
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+		 list->arch_name, ENDIANNESS);
+	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~HWCAP_THUMB;
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index a4401d6..adad70d 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -98,7 +98,7 @@
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -1021,8 +1021,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1035,7 +1035,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01d8bbd..66591fa 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -877,8 +877,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -891,7 +891,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 24b6f8c..25e3464 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -837,8 +837,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -851,7 +851,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3b70b389..ae78f4d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -816,8 +816,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -830,7 +830,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 3faa1fd..ad017eb 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1196,8 +1196,8 @@
 
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1210,7 +1210,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 000b5e1..09a16d6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -197,7 +197,7 @@
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 static struct resource usba_udc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_UDPHS_FIFO,
@@ -1332,8 +1332,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1346,7 +1346,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 305a851..628eb56 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -75,7 +75,7 @@
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -908,8 +908,8 @@
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -922,7 +922,6 @@
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 649b052..12a3f95 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -384,7 +384,7 @@
 #include <video/s1d13xxxfb.h>
 
 
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
 {
 	/* NWAIT Signal */
 	at91_set_A_periph(AT91_PIN_PC6, 0);
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
index 8eb459f..8e4a1bd 100644
--- a/arch/arm/mach-at91/include/mach/vmalloc.h
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
+#include <mach/hardware.h>
+
 #define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
 
 #endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 43eadbc..430da12 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -235,7 +235,7 @@
 	 */
 	bcmring_clocksource_init();
 
-	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index b52b8de..f4d4d6d 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -36,6 +36,7 @@
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 22d8588..cfede57 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,22 +1,26 @@
-zreladdr-$(CONFIG_ARCH_MX1)	+= 0x08008000
-params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
+params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
 
-zreladdr-$(CONFIG_MACH_MX21)	+= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
 
-zreladdr-$(CONFIG_ARCH_MX25)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
 
-zreladdr-$(CONFIG_MACH_MX27)	+= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
 
-zreladdr-$(CONFIG_ARCH_MX3)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index e0b926d..613a1b9 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1139,7 +1139,7 @@
 		return -EINVAL;
 
 	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_pred >> d->bp_pred) + 1);
+		  ((d->bm_podf >> d->bp_podf) + 1);
 
 	div = parent_rate / rate;
 	if (div == 0)
@@ -2002,6 +2002,21 @@
 	clk_set_rate(&asrc_serial_clk, 1500000);
 	clk_set_rate(&enfc_clk, 11000000);
 
+	/*
+	 * Before pinctrl API is available, we have to rely on the pad
+	 * configuration set up by bootloader.  For usdhc example here,
+	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+	 *
+	 * FIXME: This is should be removed after pinctrl API is available.
+	 * At that time, usdhc driver can call pinctrl API to change pad
+	 * configuration dynamically per different usdhc clock settings.
+	 */
+	clk_set_rate(&usdhc1_clk, 49500000);
+	clk_set_rate(&usdhc2_clk, 49500000);
+	clk_set_rate(&usdhc3_clk, 49500000);
+	clk_set_rate(&usdhc4_clk, 49500000);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 4285dfd..4ad3969 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -15,6 +15,8 @@
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
 
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 71de506..db81ed5 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -42,8 +42,8 @@
 
 extern struct sys_timer msm_timer;
 
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index b04468e..6dc1cbd 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -32,8 +32,8 @@
 
 #include "devices.h"
 
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index cf38e22..44bf716 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -28,8 +28,8 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index 232f97a..bafabb5 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -180,6 +180,9 @@
 			__asmeq("%1", "r0")
 			__asmeq("%2", "r1")
 			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
 			"smc	#0	@ switch to secure world\n"
 			: "=r" (r0)
 			: "r" (r0), "r" (r1), "r" (r2)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 2aacf41..4cb2769 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1281,9 +1281,9 @@
 	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
 DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1634,6 +1634,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
 				   unsigned long *ckih1, unsigned long *ckih2)
 {
@@ -1671,3 +1672,4 @@
 	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
 	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
 }
+#endif
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index ac2316d..064ec5a 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -471,7 +471,8 @@
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+	else
+		mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
 
 	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc1-slot-power");
@@ -480,7 +481,6 @@
 	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
index 8f2c234..58d4ee3 100644
--- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 
 #define UART_SHIFT 2
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
 		ldr	\rp, =PICOXCELL_UART1_BASE
 		.endm
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 2aec2f7..737bdc6 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o pm_runtime.o
+obj-y				:= timer.o console.o clock.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 83624e2..b862e9f 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -515,14 +515,14 @@
 	/* enable MMCIF */
 	gpio_request(GPIO_FN_MMCCLK0, NULL);
 	gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
 	gpio_request(GPIO_PORT208, NULL); /* Reset */
 	gpio_direction_output(GPIO_PORT208, 1);
 
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index a3aa0f6..4c865ec 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -201,7 +201,7 @@
 static struct resource nor_flash_resources[] = {
 	[0]	= {
 		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */		
+		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
 		.flags	= IORESOURCE_MEM,
 	}
 };
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index adc7312..bd9a784 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -48,6 +48,7 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
+/* SMSC 9220 */
 static struct resource smsc9220_resources[] = {
 	[0] = {
 		.start		= 0x14000000, /* CS5A */
@@ -77,6 +78,7 @@
 	.num_resources	= ARRAY_SIZE(smsc9220_resources),
 };
 
+/* KEYSC */
 static struct sh_keysc_info keysc_platdata = {
 	.mode		= SH_KEYSC_MODE_6,
 	.scan_timing	= 3,
@@ -120,6 +122,7 @@
 	},
 };
 
+/* GPIO KEY */
 #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
 static struct gpio_keys_button gpio_buttons[] = {
@@ -150,6 +153,7 @@
 	},
 };
 
+/* GPIO LED */
 #define GPIO_LED(n, g) { .name = n, .gpio = g }
 
 static struct gpio_led gpio_leds[] = {
@@ -175,6 +179,7 @@
 	},
 };
 
+/* MMCIF */
 static struct resource mmcif_resources[] = {
 	[0] = {
 		.name   = "MMCIF",
@@ -207,6 +212,7 @@
 	.resource       = mmcif_resources,
 };
 
+/* SDHI0 */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
 	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
@@ -243,6 +249,7 @@
 	},
 };
 
+/* SDHI1 */
 static struct sh_mobile_sdhi_info sdhi1_info = {
 	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 6697592..995a9c3 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -476,7 +476,7 @@
 	.disable	= fsidiv_disable,
 };
 
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
 	.phys	= FSIDIVA,
 	.len	= 8,
 };
@@ -484,10 +484,10 @@
 struct clk sh7372_fsidiva_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &sh7372_fsidiva_clk_mapping,
+	.mapping	= &fsidiva_clk_mapping,
 };
 
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
 	.phys	= FSIDIVB,
 	.len	= 8,
 };
@@ -495,7 +495,7 @@
 struct clk sh7372_fsidivb_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &sh7372_fsidivb_clk_mapping,
+	.mapping	= &fsidivb_clk_mapping,
 };
 
 static struct clk *late_main_clks[] = {
diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c
index 2e44f11..1b23342 100644
--- a/arch/arm/mach-shmobile/cpuidle.c
+++ b/arch/arm/mach-shmobile/cpuidle.c
@@ -26,65 +26,59 @@
 };
 
 static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
-				  struct cpuidle_state *state)
+				  struct cpuidle_driver *drv,
+				  int index)
 {
 	ktime_t before, after;
-	int requested_state = state - &dev->states[0];
 
-	dev->last_state = &dev->states[requested_state];
 	before = ktime_get();
 
 	local_irq_disable();
 	local_fiq_disable();
 
-	shmobile_cpuidle_modes[requested_state]();
+	shmobile_cpuidle_modes[index]();
 
 	local_irq_enable();
 	local_fiq_enable();
 
 	after = ktime_get();
-	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+	dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+	return index;
 }
 
 static struct cpuidle_device shmobile_cpuidle_dev;
 static struct cpuidle_driver shmobile_cpuidle_driver = {
 	.name =		"shmobile_cpuidle",
 	.owner =	THIS_MODULE,
+	.states[0] = {
+		.name = "C1",
+		.desc = "WFI",
+		.exit_latency = 1,
+		.target_residency = 1 * 2,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+	},
+	.safe_state_index = 0, /* C1 */
+	.state_count = 1,
 };
 
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 static int shmobile_cpuidle_init(void)
 {
 	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-	struct cpuidle_state *state;
+	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
 	int i;
 
-	cpuidle_register_driver(&shmobile_cpuidle_driver);
-
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		dev->states[i].name[0] = '\0';
-		dev->states[i].desc[0] = '\0';
-		dev->states[i].enter = shmobile_cpuidle_enter;
-	}
-
-	i = CPUIDLE_DRIVER_STATE_START;
-
-	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
-	state->exit_latency = 1;
-	state->target_residency = 1 * 2;
-	state->power_usage = 3;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
-	dev->safe_state = state;
-	dev->state_count = i;
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+		drv->states[i].enter = shmobile_cpuidle_enter;
 
 	if (shmobile_cpuidle_setup)
-		shmobile_cpuidle_setup(dev);
+		shmobile_cpuidle_setup(drv);
 
+	cpuidle_register_driver(drv);
+
+	dev->state_count = drv->state_count;
 	cpuidle_register_device(dev);
 
 	return 0;
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0cdbf9..834bd6c 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -9,9 +9,9 @@
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern void shmobile_handle_irq_gic(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
 extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 18ae6a9..881d515 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -470,6 +470,14 @@
 	GPIO_FN_SDHICMD2_PU,
 	GPIO_FN_MMCCMD0_PU,
 	GPIO_FN_MMCCMD1_PU,
+	GPIO_FN_MMCD0_0_PU,
+	GPIO_FN_MMCD0_1_PU,
+	GPIO_FN_MMCD0_2_PU,
+	GPIO_FN_MMCD0_3_PU,
+	GPIO_FN_MMCD0_4_PU,
+	GPIO_FN_MMCD0_5_PU,
+	GPIO_FN_MMCD0_6_PU,
+	GPIO_FN_MMCD0_7_PU,
 	GPIO_FN_FSIACK_PU,
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
index 128555e..e6e5246 100644
--- a/arch/arm/mach-shmobile/pfc-sh7367.c
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -21,68 +21,49 @@
 #include <linux/gpio.h>
 #include <mach/sh7367.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx)		\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
-	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx),	\
+	PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
-	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
-	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
-	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
-	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
-	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
-	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
-	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
-	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
-	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
 
 	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
 	PINMUX_FUNCTION_END,
@@ -327,41 +308,6 @@
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
@@ -1098,13 +1044,9 @@
 	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 49-1 -> 49-6 (GPIO) */
-	GPIO_PORT_273(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
@@ -1345,22 +1287,6 @@
 	GPIO_FN(DIVLOCK),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 9c265da..1bd6585 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -25,27 +25,13 @@
 #include <linux/gpio.h>
 #include <mach/sh7372.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
-	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
-	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx), \
+	PORT_10(fn, pfx##10, sfx),	PORT_10(fn, pfx##11, sfx), \
+	PORT_10(fn, pfx##12, sfx),	PORT_10(fn, pfx##13, sfx), \
+	PORT_10(fn, pfx##14, sfx),	PORT_10(fn, pfx##15, sfx), \
+	PORT_10(fn, pfx##16, sfx),	PORT_10(fn, pfx##17, sfx), \
+	PORT_10(fn, pfx##18, sfx),	PORT_1(fn, pfx##190, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -381,108 +367,124 @@
 	PINMUX_MARK_END,
 };
 
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr)							\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr)				     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
+	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
+	PORT_DATA_O(2),			PORT_DATA_I_PD(3),
+	PORT_DATA_I_PD(4),		PORT_DATA_I_PD(5),
+	PORT_DATA_IO_PU_PD(6),		PORT_DATA_I_PD(7),
+	PORT_DATA_IO_PD(8),		PORT_DATA_O(9),
 
-	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
-	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+	PORT_DATA_O(10),		PORT_DATA_O(11),
+	PORT_DATA_IO_PU_PD(12),		PORT_DATA_IO_PD(13),
+	PORT_DATA_IO_PD(14),		PORT_DATA_O(15),
+	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
+	PORT_DATA_I_PD(18),		PORT_DATA_IO(19),
 
-	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
-	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+	PORT_DATA_IO(20),		PORT_DATA_IO(21),
+	PORT_DATA_IO(22),		PORT_DATA_IO(23),
+	PORT_DATA_IO(24),		PORT_DATA_IO(25),
+	PORT_DATA_IO(26),		PORT_DATA_IO(27),
+	PORT_DATA_IO(28),		PORT_DATA_IO(29),
 
-	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
-	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+	PORT_DATA_IO(30),		PORT_DATA_IO(31),
+	PORT_DATA_IO(32),		PORT_DATA_IO(33),
+	PORT_DATA_IO(34),		PORT_DATA_IO(35),
+	PORT_DATA_IO(36),		PORT_DATA_IO(37),
+	PORT_DATA_IO(38),		PORT_DATA_IO(39),
 
-	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
-	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+	PORT_DATA_IO(40),		PORT_DATA_IO(41),
+	PORT_DATA_IO(42),		PORT_DATA_IO(43),
+	PORT_DATA_IO(44),		PORT_DATA_IO(45),
+	PORT_DATA_IO_PU(46),		PORT_DATA_IO_PU(47),
+	PORT_DATA_IO_PU(48),		PORT_DATA_IO_PU(49),
 
-	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
-	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+	PORT_DATA_IO_PU(50),		PORT_DATA_IO_PU(51),
+	PORT_DATA_IO_PU(52),		PORT_DATA_IO_PU(53),
+	PORT_DATA_IO_PU(54),		PORT_DATA_IO_PU(55),
+	PORT_DATA_IO_PU(56),		PORT_DATA_IO_PU(57),
+	PORT_DATA_IO_PU(58),		PORT_DATA_IO_PU(59),
 
-	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
-	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+	PORT_DATA_IO_PU(60),		PORT_DATA_IO_PU(61),
+	PORT_DATA_IO(62),		PORT_DATA_O(63),
+	PORT_DATA_O(64),		PORT_DATA_IO_PU(65),
+	PORT_DATA_O(66),		PORT_DATA_IO_PU(67),  /*66?*/
+	PORT_DATA_O(68),		PORT_DATA_IO(69),
 
-	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
-	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+	PORT_DATA_IO(70),		PORT_DATA_IO(71),
+	PORT_DATA_O(72),		PORT_DATA_I_PU(73),
+	PORT_DATA_I_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
+	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
+	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
 
-	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
-	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
+	PORT_DATA_IO_PU_PD(82),		PORT_DATA_IO_PU_PD(83),
+	PORT_DATA_IO_PU_PD(84),		PORT_DATA_IO_PU_PD(85),
+	PORT_DATA_IO_PU_PD(86),		PORT_DATA_IO_PU_PD(87),
+	PORT_DATA_IO_PU_PD(88),		PORT_DATA_IO_PU_PD(89),
 
-	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
-	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+	PORT_DATA_IO_PU_PD(90),		PORT_DATA_IO_PU_PD(91),
+	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
+	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
+	PORT_DATA_IO_PU(96),		PORT_DATA_IO_PU_PD(97),
+	PORT_DATA_IO_PU_PD(98),		PORT_DATA_O(99), /*99?*/
 
-	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
-	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+	PORT_DATA_IO_PD(100),		PORT_DATA_IO_PD(101),
+	PORT_DATA_IO_PD(102),		PORT_DATA_IO_PD(103),
+	PORT_DATA_IO_PD(104),		PORT_DATA_IO_PD(105),
+	PORT_DATA_IO_PU(106),		PORT_DATA_IO_PU(107),
+	PORT_DATA_IO_PU(108),		PORT_DATA_IO_PU(109),
 
-	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
-	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+	PORT_DATA_IO_PU(110),		PORT_DATA_IO_PU(111),
+	PORT_DATA_IO_PD(112),		PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PU(114),		PORT_DATA_IO_PU(115),
+	PORT_DATA_IO_PU(116),		PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118),		PORT_DATA_IO_PU(119),
 
-	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
-	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+	PORT_DATA_IO_PU(120),		PORT_DATA_IO_PD(121),
+	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
+	PORT_DATA_IO_PD(124),		PORT_DATA_IO_PD(125),
+	PORT_DATA_IO_PD(126),		PORT_DATA_IO_PD(127),
+	PORT_DATA_IO_PD(128),		PORT_DATA_IO_PU_PD(129),
 
-	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
-	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+	PORT_DATA_IO_PU_PD(130),	PORT_DATA_IO_PU_PD(131),
+	PORT_DATA_IO_PU_PD(132),	PORT_DATA_IO_PU_PD(133),
+	PORT_DATA_IO_PU_PD(134),	PORT_DATA_IO_PU_PD(135),
+	PORT_DATA_IO_PD(136),		PORT_DATA_IO_PD(137),
+	PORT_DATA_IO_PD(138),		PORT_DATA_IO_PD(139),
 
-	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
-	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+	PORT_DATA_IO_PD(140),		PORT_DATA_IO_PD(141),
+	PORT_DATA_IO_PD(142),		PORT_DATA_IO_PU_PD(143),
+	PORT_DATA_IO_PD(144),		PORT_DATA_IO_PD(145),
+	PORT_DATA_IO_PD(146),		PORT_DATA_IO_PD(147),
+	PORT_DATA_IO_PD(148),		PORT_DATA_IO_PD(149),
 
-	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
-	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+	PORT_DATA_IO_PD(150),		PORT_DATA_IO_PD(151),
+	PORT_DATA_IO_PU_PD(152),	PORT_DATA_I_PD(153),
+	PORT_DATA_IO_PU_PD(154),	PORT_DATA_I_PD(155),
+	PORT_DATA_IO_PD(156),		PORT_DATA_IO_PD(157),
+	PORT_DATA_I_PD(158),		PORT_DATA_IO_PD(159),
 
-	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
-	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+	PORT_DATA_O(160),		PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
+	PORT_DATA_I_PD(164),		PORT_DATA_IO_PD(165),
+	PORT_DATA_I_PD(166),		PORT_DATA_I_PD(167),
+	PORT_DATA_I_PD(168),		PORT_DATA_I_PD(169),
 
-	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
-	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+	PORT_DATA_I_PD(170),		PORT_DATA_O(171),
+	PORT_DATA_IO_PU_PD(172),	PORT_DATA_IO_PU_PD(173),
+	PORT_DATA_IO_PU_PD(174),	PORT_DATA_IO_PU_PD(175),
+	PORT_DATA_IO_PU_PD(176),	PORT_DATA_IO_PU_PD(177),
+	PORT_DATA_IO_PU_PD(178),	PORT_DATA_O(179),
 
-	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
-	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+	PORT_DATA_IO_PU_PD(180),	PORT_DATA_IO_PU_PD(181),
+	PORT_DATA_IO_PU_PD(182),	PORT_DATA_IO_PU_PD(183),
+	PORT_DATA_IO_PU_PD(184),	PORT_DATA_O(185),
+	PORT_DATA_IO_PU_PD(186),	PORT_DATA_IO_PU_PD(187),
+	PORT_DATA_IO_PU_PD(188),	PORT_DATA_IO_PU_PD(189),
 
-	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
-	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
-	_IO_UD(190),
+	PORT_DATA_IO_PU_PD(190),
 
 	/* IRQ */
 	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
@@ -926,10 +928,6 @@
 	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 
 	/* PORT */
@@ -1201,22 +1199,6 @@
 	GPIO_FN(SDENC_DV_CLKI),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0,	0xE6051000), /* PORT0CR */
 	PORTCR(1,	0xE6051001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
index 613e684..2f10511 100644
--- a/arch/arm/mach-shmobile/pfc-sh7377.c
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -22,84 +22,65 @@
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx)				\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
-	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
-	_1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx),	\
+	PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx),	\
+	PORT_1(fn, pfx##264, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
-	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
-	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
-	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
-	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
-	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
-	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
-	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
-	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
-	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
 
 	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
 	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
@@ -360,45 +341,6 @@
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 	/* 55-1 (GPIO) */
@@ -1078,13 +1020,9 @@
 	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 55-1 -> 55-5 (GPIO) */
-	GPIO_PORT_265(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
@@ -1362,23 +1300,6 @@
 	GPIO_FN(RESETOUTS),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)	\
-	0, (out), (in), 0,	\
-		0, 0, 0, 0,	\
-		0, 0, (in_pd), 0,	\
-		0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
-			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
-				PORT##nr##_FN0, PORT##nr##_FN1,	\
-				PORT##nr##_FN2, PORT##nr##_FN3,	\
-				PORT##nr##_FN4, PORT##nr##_FN5,	\
-				PORT##nr##_FN6, PORT##nr##_FN7 }	\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index 5abe02f..e05634c 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -24,83 +24,71 @@
 #include <mach/sh73a0.h>
 #include <mach/irqs.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx)				\
-	_10(fn, pfx,    sfx), _10(fn, pfx##1, sfx),	\
-	_10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx),	\
-	_10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx),	\
-	_10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx),	\
-	_10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx),	\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx),	\
-	_1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx),	\
-	_1(fn, pfx##282, sfx),				\
-	_1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx),	\
-	_10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx,    sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx),	\
+	PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx),	\
+	PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx),	\
+	PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx),	\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx),	\
+	PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx),	\
+	PORT_1(fn, pfx##282, sfx),				\
+	PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx),	\
+	PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_310(DATA),			/* PORT0_DATA -> PORT309_DATA */
+	PORT_ALL(DATA),			/* PORT0_DATA -> PORT309_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_310(IN),			/* PORT0_IN -> PORT309_IN */
+	PORT_ALL(IN),			/* PORT0_IN -> PORT309_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_310(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
+	PORT_ALL(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_310(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
+	PORT_ALL(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_310(OUT),			/* PORT0_OUT -> PORT309_OUT */
+	PORT_ALL(OUT),			/* PORT0_OUT -> PORT309_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_310(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
-	PORT_310(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
-	PORT_310(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
-	PORT_310(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
-	PORT_310(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
-	PORT_310(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
-	PORT_310(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
-	PORT_310(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
-	PORT_310(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
-	PORT_310(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
+	PORT_ALL(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
+	PORT_ALL(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
+	PORT_ALL(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
+	PORT_ALL(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
+	PORT_ALL(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
+	PORT_ALL(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
+	PORT_ALL(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
+	PORT_ALL(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
+	PORT_ALL(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
+	PORT_ALL(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
 
 	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
 	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
@@ -508,6 +496,14 @@
 	SDHICMD2_PU_MARK,
 	MMCCMD0_PU_MARK,
 	MMCCMD1_PU_MARK,
+	MMCD0_0_PU_MARK,
+	MMCD0_1_PU_MARK,
+	MMCD0_2_PU_MARK,
+	MMCD0_3_PU_MARK,
+	MMCD0_4_PU_MARK,
+	MMCD0_5_PU_MARK,
+	MMCD0_6_PU_MARK,
+	MMCD0_7_PU_MARK,
 	FSIBISLD_PU_MARK,
 	FSIACK_PU_MARK,
 	FSIAILR_PU_MARK,
@@ -517,45 +513,6 @@
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 
@@ -1561,6 +1518,24 @@
 		MSEL4CR_MSEL15_0),
 	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
 		MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MMCD0_0_PU_MARK,
+		    PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_PU_MARK,
+		    PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_PU_MARK,
+		    PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_PU_MARK,
+		    PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_PU_MARK,
+		    PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_5_PU_MARK,
+		    PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_6_PU_MARK,
+		    PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_7_PU_MARK,
+		    PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
 	PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
 	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
 	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
@@ -1568,12 +1543,8 @@
 	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
-	GPIO_PORT_310(),
+	GPIO_PORT_ALL(),
 
 	/* Table 25-1 (Functions 0-7) */
 	GPIO_FN(VBUS_0),
@@ -2236,24 +2207,20 @@
 	GPIO_FN(SDHICMD2_PU),
 	GPIO_FN(MMCCMD0_PU),
 	GPIO_FN(MMCCMD1_PU),
+	GPIO_FN(MMCD0_0_PU),
+	GPIO_FN(MMCD0_1_PU),
+	GPIO_FN(MMCD0_2_PU),
+	GPIO_FN(MMCD0_3_PU),
+	GPIO_FN(MMCD0_4_PU),
+	GPIO_FN(MMCD0_5_PU),
+	GPIO_FN(MMCD0_6_PU),
+	GPIO_FN(MMCD0_7_PU),
 	GPIO_FN(FSIACK_PU),
 	GPIO_FN(FSIAILR_PU),
 	GPIO_FN(FSIAIBT_PU),
 	GPIO_FN(FSIAISLD_PU),
 };
 
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
-		0, \
-		/*0001*/ PORT##nr##_OUT , \
-		/*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
-		/*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
-		/*1110*/ PORT##nr##_IN_PU, 0, \
-		PORT##nr##_FN0, PORT##nr##_FN1,	PORT##nr##_FN2, \
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5, \
-		PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 7961273..34bbcbf 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/bitrev.h>
+#include <linux/console.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
@@ -106,9 +107,8 @@
 	return 0;
 }
 
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
 {
-	struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
 	unsigned int mask = 1 << sh7372_pd->bit_shift;
 	unsigned int retry_count;
 	int ret = 0;
@@ -123,13 +123,13 @@
 
 	for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
 		if (!(__raw_readl(SWUCR) & mask))
-			goto out;
+			break;
 		if (retry_count > PSTR_RETRIES)
 			udelay(PSTR_DELAY_US);
 		else
 			cpu_relax();
 	}
-	if (__raw_readl(SWUCR) & mask)
+	if (!retry_count)
 		ret = -EIO;
 
 	if (!sh7372_pd->no_debug)
@@ -137,12 +137,17 @@
 			 mask, __raw_readl(PSTR));
 
  out:
-	if (ret == 0 && sh7372_pd->resume)
+	if (ret == 0 && sh7372_pd->resume && do_resume)
 		sh7372_pd->resume();
 
 	return ret;
 }
 
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+	 return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
 static void sh7372_a4r_suspend(void)
 {
 	sh7372_intcs_suspend();
@@ -174,7 +179,7 @@
 	genpd->active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
 	genpd->power_on = pd_power_up;
-	genpd->power_on(&sh7372_pd->genpd);
+	__pd_power_up(sh7372_pd, false);
 }
 
 void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
@@ -227,11 +232,23 @@
 	.no_debug = true,
 };
 
+static void sh7372_a3sp_init(void)
+{
+	/* serial consoles make use of SCIF hardware located in A3SP,
+	 * keep such power domain on if "no_console_suspend" is set.
+	 */
+	sh7372_a3sp.stay_on = !console_suspend_enabled;
+}
+
 struct sh7372_pm_domain sh7372_a3sg = {
 	.bit_shift = 13,
 };
 
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
+
+static inline void sh7372_a3sp_init(void) {}
+
+#endif /* !CONFIG_PM */
 
 #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
 static int sh7372_do_idle_core_standby(unsigned long unused)
@@ -402,22 +419,18 @@
 
 #ifdef CONFIG_CPU_IDLE
 
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
 {
-	struct cpuidle_state *state;
-	int i = dev->state_count;
+	struct cpuidle_state *state = &drv->states[drv->state_count];
 
-	state = &dev->states[i];
 	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
 	strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
 	state->exit_latency = 10;
 	state->target_residency = 20 + 10;
-	state->power_usage = 1; /* perhaps not */
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+	state->flags = CPUIDLE_FLAG_TIME_VALID;
+	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
 
-	dev->state_count = i + 1;
+	drv->state_count++;
 }
 
 static void sh7372_cpuidle_init(void)
@@ -469,6 +482,8 @@
 	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
 	__raw_writel(0, PDNSEL);
 
+	sh7372_a3sp_init();
+
 	sh7372_suspend_init();
 	sh7372_cpuidle_init();
 }
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index d368f8d..74743ad 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -101,6 +101,13 @@
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, tegra_dt_match_table,
+				tegra20_auxdata_lookup, NULL);
+
 	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
 		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
 			pinmux_configs[i].init();
@@ -110,12 +117,6 @@
 
 	WARN(i == ARRAY_SIZE(pinmux_configs),
 		"Unknown platform! Pinmuxing not initialized\n");
-
-	/*
-	 * Finished with the static registrations now; fill in the missing
-	 * devices
-	 */
-	of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
 }
 
 static const char * tegra_dt_board_compat[] = {
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index e99b456..7a4a26d 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -161,7 +163,9 @@
 
 void harmony_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index fb20894..be30e21 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -158,7 +160,9 @@
 
 void paz00_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index fbce31d..b1c2972 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 #include <mach/pinmux-t2.h>
@@ -191,6 +192,7 @@
 	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
+	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
 	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
 	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
@@ -218,7 +220,9 @@
 
 void __init seaboard_common_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
 
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 4969dd2..7ab719d 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 
@@ -157,7 +158,9 @@
 
 void __init trimslice_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 	tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
 }
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 7a1fa6a..5b0c38a 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -422,7 +422,7 @@
 
 /* LCD controller*/
 
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
 	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
 	[0] = {
 		.type		= LCM_DCCS_VA_SRC_RGB565,
@@ -445,7 +445,7 @@
 	},
 };
 
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
 #if defined(CONFIG_GPM1040A0_320X240)
 	.displays		= &nuc900_lcd_info[0],
 #else
diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h
index 94c0e71..23ef1f5 100644
--- a/arch/arm/mach-w90x900/include/mach/mfp.h
+++ b/arch/arm/mach-w90x900/include/mach/mfp.h
@@ -19,6 +19,7 @@
 extern void mfp_set_groupf(struct device *dev);
 extern void mfp_set_groupc(struct device *dev);
 extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
 
 #endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
index bd94819..2c4e0c1 100644
--- a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+++ b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_SPI_H
 #define __ASM_ARCH_SPI_H
 
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
 
 struct nuc900_spi_info {
 	unsigned int num_cs;
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
index fb7fb62..9dd7461 100644
--- a/arch/arm/mach-w90x900/mfp.c
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -26,10 +26,8 @@
 #define REG_MFSEL	(W90X900_VA_GCR + 0xC)
 
 #define GPSELF		(0x01 << 1)
-
 #define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
+#define GPSELD		(0x0f << 4)
 
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
@@ -37,11 +35,16 @@
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
 #define GPIOG22TO23	(0x03 << 22)
+#define GPIOG18TO20	(0x07 << 18)
 
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 #define ENAC97		(0x02 << 22)
+#define ENSD1		(0x02 << 18)
+#define ENSD0		(0x0a << 4)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -127,16 +130,19 @@
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
 {
 	unsigned long mfpen;
 	const char *dev_id;
 
-	BUG_ON(!dev);
+	BUG_ON((!dev) && (!subname));
 
 	mutex_lock(&mfp_mutex);
 
-	dev_id = dev_name(dev);
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
 
 	mfpen = __raw_readl(REG_MFSEL);
 
@@ -152,6 +158,9 @@
 	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
 		mfpen &= ~(GPIOG22TO23);
 		mfpen |= ENAC97;/*enable AC97*/
+	} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+		mfpen &= ~(GPIOG18TO20);
+		mfpen |= (ENSD1 | 0x01);/*enable sd1*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
@@ -162,3 +171,30 @@
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON((!dev) && (!subname));
+
+	mutex_lock(&mfp_mutex);
+
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+		mfpen &= ~GPSELD;/*enable sd0*/
+		mfpen |= ENSD0;
+	} else
+		mfpen &= (~GPSELD);
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a08a951..b3a1f2b3 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -10,7 +10,7 @@
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
@@ -26,7 +26,7 @@
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for machines using Freescale's i.MX50 and i.MX53
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 8875fb4..55f1569 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <mach/common.h>
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 #include <mach/hardware.h>
 
 #include "irq-common.h"
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
index b3b8eed..12f8f81 100644
--- a/arch/arm/plat-mxc/gic.c
+++ b/arch/arm/plat-mxc/gic.c
@@ -28,21 +28,14 @@
 		if (irqnr == 1023)
 			break;
 
-		if (irqnr > 29 && irqnr < 1021)
+		if (irqnr > 15 && irqnr < 1021)
 			handle_IRQ(irqnr, regs);
 #ifdef CONFIG_SMP
-		else if (irqnr < 16) {
+		else {
 			writel_relaxed(irqstat, gic_cpu_base_addr +
 						GIC_CPU_EOI);
 			handle_IPI(irqnr, regs);
 		}
 #endif
-#ifdef CONFIG_LOCAL_TIMERS
-		else if (irqnr == 29) {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_local_timer(regs);
-		}
-#endif
 	} while (1);
 }
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 9fe0dfc..ca5cf26 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -25,6 +25,3 @@
 
 	.macro test_for_ipi, irqnr, irqstat, base, tmp
 	.endm
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	.endm
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index e993a184..a3c164c 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 7fd0ec7..ecacdf3 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -32,6 +32,8 @@
 struct bfin_serial_port {
 	struct uart_port port;
 	unsigned int old_status;
+	int tx_irq;
+	int rx_irq;
 	int status_irq;
 #ifndef BFIN_UART_BF54X_STYLE
 	unsigned int lsr;
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 1082e49..d1c0c0c 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -373,8 +373,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -416,8 +421,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
index 55c1279..5470bf8 100644
--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -309,8 +309,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -352,8 +357,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index 8d65d47..5bc6938 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -381,8 +381,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -424,8 +429,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 6410fc1..cd28969 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -539,8 +540,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -582,8 +588,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -801,7 +812,6 @@
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/export.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 64f7278..9f792ea 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -417,8 +418,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -460,8 +466,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -674,7 +685,6 @@
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/export.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index e4c6a12..3ecafff 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -711,8 +711,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -754,8 +759,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index 76dbc03..3a92c43 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -496,8 +496,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -540,8 +545,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 5da5787..47cadd3 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -238,8 +238,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index b0ec825..18817d5 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -193,8 +193,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 14f54a3..2c8f30e 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -221,8 +221,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index ecd2801..144556e 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -292,8 +292,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index fbee77f..b597d4e 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -151,8 +151,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 964a8e5..2afd02e 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -298,8 +298,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index 1471c51..604a430 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -305,8 +306,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -366,8 +372,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -569,7 +580,6 @@
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 47cf37d..d916b46 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -306,8 +307,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -349,8 +355,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -534,7 +545,6 @@
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c
index 33e69e4..5f30722 100644
--- a/arch/blackfin/mach-bf537/boards/dnp5370.c
+++ b/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -49,7 +50,6 @@
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
@@ -237,8 +237,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -281,8 +286,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end   = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end   = IRQ_UART1_RX+1,
+		.end   = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index c62f9dc..3901dd0 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -240,8 +240,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -283,8 +288,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 3099e91..aebd31c 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -8,6 +8,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -309,8 +310,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -352,8 +358,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 27f955d..7fbb0bb 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -1566,8 +1567,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -1621,8 +1627,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -1992,7 +2003,6 @@
 
 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
 #include <linux/i2c/adp8860.h>
-#include <linux/export.h>
 static struct led_info adp8860_leds[] = {
 	{
 		.name = "adp8860-led7",
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 8418030..6917ce2 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -306,8 +307,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -349,8 +355,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -536,7 +547,6 @@
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 629f3c3..8356eb5 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -49,8 +49,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -104,8 +109,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -147,8 +157,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 212b9e0..0350eac 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -135,8 +135,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -178,8 +183,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -237,8 +247,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -280,8 +295,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
+		.end = IRQ_UART3_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index cd9cbb6..bb868ac 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -241,8 +241,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -284,8 +289,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -343,8 +353,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -386,8 +401,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
+		.end = IRQ_UART3_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 972e134..b1b7339 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -203,8 +203,13 @@
 	 .flags = IORESOURCE_MEM,
 	 },
 	{
+	 .start = IRQ_UART_TX,
+	 .end = IRQ_UART_TX,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
 	 .start = IRQ_UART_RX,
-	 .end = IRQ_UART_RX + 1,
+	 .end = IRQ_UART_RX,
 	 .flags = IORESOURCE_IRQ,
 	 },
 	{
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index c1b72f2..c017cf0 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -277,8 +277,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 9490dc8..27f22ed 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -172,8 +172,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index bb056e6..1a57bc9 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -51,8 +51,13 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 32d9086..5f2cdb3 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -3,7 +3,7 @@
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index e47e9c3..de43aad 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -3,7 +3,7 @@
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6c28582..361d540 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -4,8 +4,8 @@
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
 	select GENERIC_ATOMIC64 if MMU
-	select HAVE_GENERIC_HARDIRQS if !MMU
-	select GENERIC_IRQ_SHOW if !MMU
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 
 config RWSEM_GENERIC_SPINLOCK
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index 8294f0c..3adb499 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -2,6 +2,15 @@
 
 comment "Bus Support"
 
+config DIO
+	bool "DIO bus support"
+	depends on HP300
+	default y
+	help
+	  Say Y here to enable support for the "DIO" expansion bus used in
+	  HP300 machines. If you are using such a system you almost certainly
+	  want this.
+
 config NUBUS
 	bool
 	depends on MAC
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index d214034..6033f5d 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -24,6 +24,37 @@
 	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 	  and memory size.
 
+config NATFEAT
+	bool "ARAnyM emulator support"
+	depends on ATARI
+	help
+	  This option enables support for ARAnyM native features, such as
+	  access to a disk image as /dev/hda.
+
+config NFBLOCK
+	tristate "NatFeat block device support"
+	depends on BLOCK && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat block device
+	  which allows direct access to the hard drives without using
+	  the hardware emulation.
+
+config NFCON
+	tristate "NatFeat console driver"
+	depends on NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat console driver
+	  which allows the console output to be redirected to the stderr
+	  output of ARAnyM.
+
+config NFETH
+	tristate "NatFeat Ethernet support"
+	depends on ETHERNET && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat network device
+	  which will emulate a regular ethernet device while presenting an
+	  ethertap device to the host system.
+
 endmenu
 
 menu "Character devices"
diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index c5b5212..47b5f90 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -1,43 +1,15 @@
 /*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- *           this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- *           be careful that dev_id for this sources is unique since this the
- *           only possibility to distinguish between different handlers for
- *           free_irq. irq lists also have different irq flags:
- *           - IRQ_FLG_FAST: handler is inserted at top of list (after other
- *                           fast handlers)
- *           - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- *                           they're executed irq level is set to the previous
- *                           one, but handlers don't need to be reentrant, if
- *                           reentrance occurred, slow handlers will be just
- *                           called again.
- *           The whole interrupt handling for CIAs is moved to cia.c
- *           /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- *           interrupts, normal and fast handlers, fast handlers being
- *           marked with IRQF_DISABLED and runs with all other interrupts
- *           disabled. Normal interrupts disable their own source but
- *           run with all other interrupt sources enabled.
- *           PORTS and EXTER interrupts are always shared even if the
- *           drivers do not explicitly mark this when calling
- *           request_irq which they really should do.
- *           This is similar to the way interrupts are handled on all
- *           other architectures and makes a ton of sense besides
- *           having the advantage of making it easier to share
- *           drivers.
- *           /Jes
  */
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/irq.h>
 
 #include <asm/irq.h>
 #include <asm/traps.h>
@@ -45,20 +17,128 @@
 #include <asm/amigaints.h>
 #include <asm/amipcmcia.h>
 
-static void amiga_enable_irq(unsigned int irq);
-static void amiga_disable_irq(unsigned int irq);
-static irqreturn_t ami_int1(int irq, void *dev_id);
-static irqreturn_t ami_int3(int irq, void *dev_id);
-static irqreturn_t ami_int4(int irq, void *dev_id);
-static irqreturn_t ami_int5(int irq, void *dev_id);
 
-static struct irq_controller amiga_irq_controller = {
+/*
+ * Enable/disable a particular machine specific interrupt source.
+ * Note that this may affect other interrupts in case of a shared interrupt.
+ * This function should only be called for a _very_ short time to change some
+ * internal data, that may not be changed by the interrupt at the same time.
+ */
+
+static void amiga_irq_enable(struct irq_data *data)
+{
+	amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
+}
+
+static void amiga_irq_disable(struct irq_data *data)
+{
+	amiga_custom.intena = 1 << (data->irq - IRQ_USER);
+}
+
+static struct irq_chip amiga_irq_chip = {
 	.name		= "amiga",
-	.lock		= __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
-	.enable		= amiga_enable_irq,
-	.disable	= amiga_disable_irq,
+	.irq_enable	= amiga_irq_enable,
+	.irq_disable	= amiga_irq_disable,
 };
 
+
+/*
+ * The builtin Amiga hardware interrupt handlers.
+ */
+
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if serial transmit buffer empty, interrupt */
+	if (ints & IF_TBE) {
+		amiga_custom.intreq = IF_TBE;
+		generic_handle_irq(IRQ_AMIGA_TBE);
+	}
+
+	/* if floppy disk transfer complete, interrupt */
+	if (ints & IF_DSKBLK) {
+		amiga_custom.intreq = IF_DSKBLK;
+		generic_handle_irq(IRQ_AMIGA_DSKBLK);
+	}
+
+	/* if software interrupt set, interrupt */
+	if (ints & IF_SOFT) {
+		amiga_custom.intreq = IF_SOFT;
+		generic_handle_irq(IRQ_AMIGA_SOFT);
+	}
+}
+
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if a blitter interrupt */
+	if (ints & IF_BLIT) {
+		amiga_custom.intreq = IF_BLIT;
+		generic_handle_irq(IRQ_AMIGA_BLIT);
+	}
+
+	/* if a copper interrupt */
+	if (ints & IF_COPER) {
+		amiga_custom.intreq = IF_COPER;
+		generic_handle_irq(IRQ_AMIGA_COPPER);
+	}
+
+	/* if a vertical blank interrupt */
+	if (ints & IF_VERTB) {
+		amiga_custom.intreq = IF_VERTB;
+		generic_handle_irq(IRQ_AMIGA_VERTB);
+	}
+}
+
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if audio 0 interrupt */
+	if (ints & IF_AUD0) {
+		amiga_custom.intreq = IF_AUD0;
+		generic_handle_irq(IRQ_AMIGA_AUD0);
+	}
+
+	/* if audio 1 interrupt */
+	if (ints & IF_AUD1) {
+		amiga_custom.intreq = IF_AUD1;
+		generic_handle_irq(IRQ_AMIGA_AUD1);
+	}
+
+	/* if audio 2 interrupt */
+	if (ints & IF_AUD2) {
+		amiga_custom.intreq = IF_AUD2;
+		generic_handle_irq(IRQ_AMIGA_AUD2);
+	}
+
+	/* if audio 3 interrupt */
+	if (ints & IF_AUD3) {
+		amiga_custom.intreq = IF_AUD3;
+		generic_handle_irq(IRQ_AMIGA_AUD3);
+	}
+}
+
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
+
+	/* if serial receive buffer full interrupt */
+	if (ints & IF_RBF) {
+		/* acknowledge of IF_RBF must be done by the serial interrupt */
+		generic_handle_irq(IRQ_AMIGA_RBF);
+	}
+
+	/* if a disk sync interrupt */
+	if (ints & IF_DSKSYN) {
+		amiga_custom.intreq = IF_DSKSYN;
+		generic_handle_irq(IRQ_AMIGA_DSKSYN);
+	}
+}
+
+
 /*
  * void amiga_init_IRQ(void)
  *
@@ -72,16 +152,13 @@
 
 void __init amiga_init_IRQ(void)
 {
-	if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
-		pr_err("Couldn't register int%d\n", 1);
-	if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
-		pr_err("Couldn't register int%d\n", 3);
-	if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
-		pr_err("Couldn't register int%d\n", 4);
-	if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
-		pr_err("Couldn't register int%d\n", 5);
+	m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+				  AMI_STD_IRQS);
 
-	m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
+	irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+	irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+	irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+	irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
 
 	/* turn off PCMCIA interrupts */
 	if (AMIGAHW_PRESENT(PCMCIA))
@@ -95,120 +172,3 @@
 	cia_init_IRQ(&ciaa_base);
 	cia_init_IRQ(&ciab_base);
 }
-
-/*
- * Enable/disable a particular machine specific interrupt source.
- * Note that this may affect other interrupts in case of a shared interrupt.
- * This function should only be called for a _very_ short time to change some
- * internal data, that may not be changed by the interrupt at the same time.
- */
-
-static void amiga_enable_irq(unsigned int irq)
-{
-	amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
-}
-
-static void amiga_disable_irq(unsigned int irq)
-{
-	amiga_custom.intena = 1 << (irq - IRQ_USER);
-}
-
-/*
- * The builtin Amiga hardware interrupt handlers.
- */
-
-static irqreturn_t ami_int1(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial transmit buffer empty, interrupt */
-	if (ints & IF_TBE) {
-		amiga_custom.intreq = IF_TBE;
-		m68k_handle_int(IRQ_AMIGA_TBE);
-	}
-
-	/* if floppy disk transfer complete, interrupt */
-	if (ints & IF_DSKBLK) {
-		amiga_custom.intreq = IF_DSKBLK;
-		m68k_handle_int(IRQ_AMIGA_DSKBLK);
-	}
-
-	/* if software interrupt set, interrupt */
-	if (ints & IF_SOFT) {
-		amiga_custom.intreq = IF_SOFT;
-		m68k_handle_int(IRQ_AMIGA_SOFT);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ami_int3(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if a blitter interrupt */
-	if (ints & IF_BLIT) {
-		amiga_custom.intreq = IF_BLIT;
-		m68k_handle_int(IRQ_AMIGA_BLIT);
-	}
-
-	/* if a copper interrupt */
-	if (ints & IF_COPER) {
-		amiga_custom.intreq = IF_COPER;
-		m68k_handle_int(IRQ_AMIGA_COPPER);
-	}
-
-	/* if a vertical blank interrupt */
-	if (ints & IF_VERTB) {
-		amiga_custom.intreq = IF_VERTB;
-		m68k_handle_int(IRQ_AMIGA_VERTB);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ami_int4(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if audio 0 interrupt */
-	if (ints & IF_AUD0) {
-		amiga_custom.intreq = IF_AUD0;
-		m68k_handle_int(IRQ_AMIGA_AUD0);
-	}
-
-	/* if audio 1 interrupt */
-	if (ints & IF_AUD1) {
-		amiga_custom.intreq = IF_AUD1;
-		m68k_handle_int(IRQ_AMIGA_AUD1);
-	}
-
-	/* if audio 2 interrupt */
-	if (ints & IF_AUD2) {
-		amiga_custom.intreq = IF_AUD2;
-		m68k_handle_int(IRQ_AMIGA_AUD2);
-	}
-
-	/* if audio 3 interrupt */
-	if (ints & IF_AUD3) {
-		amiga_custom.intreq = IF_AUD3;
-		m68k_handle_int(IRQ_AMIGA_AUD3);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ami_int5(int irq, void *dev_id)
-{
-	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
-
-	/* if serial receive buffer full interrupt */
-	if (ints & IF_RBF) {
-		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		m68k_handle_int(IRQ_AMIGA_RBF);
-	}
-
-	/* if a disk sync interrupt */
-	if (ints & IF_DSKSYN) {
-		amiga_custom.intreq = IF_DSKSYN;
-		m68k_handle_int(IRQ_AMIGA_DSKSYN);
-	}
-	return IRQ_HANDLED;
-}
diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c
index ecd0f7c..18c0e29 100644
--- a/arch/m68k/amiga/cia.c
+++ b/arch/m68k/amiga/cia.c
@@ -93,13 +93,14 @@
 	amiga_custom.intreq = base->int_mask;
 	for (; ints; mach_irq++, ints >>= 1) {
 		if (ints & 1)
-			m68k_handle_int(mach_irq);
+			generic_handle_irq(mach_irq);
 	}
 	return IRQ_HANDLED;
 }
 
-static void cia_enable_irq(unsigned int irq)
+static void cia_irq_enable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned char mask;
 
 	if (irq >= IRQ_AMIGA_CIAB) {
@@ -113,19 +114,20 @@
 	}
 }
 
-static void cia_disable_irq(unsigned int irq)
+static void cia_irq_disable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq >= IRQ_AMIGA_CIAB)
 		cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
 	else
 		cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
 }
 
-static struct irq_controller cia_irq_controller = {
+static struct irq_chip cia_irq_chip = {
 	.name		= "cia",
-	.lock		= __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock),
-	.enable		= cia_enable_irq,
-	.disable	= cia_disable_irq,
+	.irq_enable	= cia_irq_enable,
+	.irq_disable	= cia_irq_disable,
 };
 
 /*
@@ -134,9 +136,9 @@
  * into this chain.
  */
 
-static void auto_enable_irq(unsigned int irq)
+static void auto_irq_enable(struct irq_data *data)
 {
-	switch (irq) {
+	switch (data->irq) {
 	case IRQ_AUTO_2:
 		amiga_custom.intena = IF_SETCLR | IF_PORTS;
 		break;
@@ -146,9 +148,9 @@
 	}
 }
 
-static void auto_disable_irq(unsigned int irq)
+static void auto_irq_disable(struct irq_data *data)
 {
-	switch (irq) {
+	switch (data->irq) {
 	case IRQ_AUTO_2:
 		amiga_custom.intena = IF_PORTS;
 		break;
@@ -158,24 +160,25 @@
 	}
 }
 
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
 	.name		= "auto",
-	.lock		= __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
-	.enable		= auto_enable_irq,
-	.disable	= auto_disable_irq,
+	.irq_enable	= auto_irq_enable,
+	.irq_disable	= auto_irq_disable,
 };
 
 void __init cia_init_IRQ(struct ciabase *base)
 {
-	m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS);
+	m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
+				  base->cia_irq, CIA_IRQS);
 
 	/* clear any pending interrupt and turn off all interrupts */
 	cia_set_irq(base, CIA_ICR_ALL);
 	cia_able_irq(base, CIA_ICR_ALL);
 
 	/* override auto int and install CIA handler */
-	m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
-	m68k_irq_startup(base->handler_irq);
+	m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
+				  base->handler_irq, 1);
+	m68k_irq_startup_irq(base->handler_irq);
 	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
 			base->name, base))
 		pr_err("Couldn't register %s interrupt\n", base->name);
diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c
index 5d47f3a..17be1e7 100644
--- a/arch/m68k/apollo/dn_ints.c
+++ b/arch/m68k/apollo/dn_ints.c
@@ -1,19 +1,13 @@
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
-#include <asm/irq.h>
 #include <asm/traps.h>
 #include <asm/apollohw.h>
 
-void dn_process_int(unsigned int irq, struct pt_regs *fp)
+unsigned int apollo_irq_startup(struct irq_data *data)
 {
-	__m68k_handle_int(irq, fp);
+	unsigned int irq = data->irq;
 
-	*(volatile unsigned char *)(pica)=0x20;
-	*(volatile unsigned char *)(picb)=0x20;
-}
-
-int apollo_irq_startup(unsigned int irq)
-{
 	if (irq < 8)
 		*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
 	else
@@ -21,24 +15,33 @@
 	return 0;
 }
 
-void apollo_irq_shutdown(unsigned int irq)
+void apollo_irq_shutdown(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq < 8)
 		*(volatile unsigned char *)(pica+1) |= (1 << irq);
 	else
 		*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
 }
 
-static struct irq_controller apollo_irq_controller = {
+void apollo_irq_eoi(struct irq_data *data)
+{
+	*(volatile unsigned char *)(pica) = 0x20;
+	*(volatile unsigned char *)(picb) = 0x20;
+}
+
+static struct irq_chip apollo_irq_chip = {
 	.name           = "apollo",
-	.lock           = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock),
-	.startup        = apollo_irq_startup,
-	.shutdown       = apollo_irq_shutdown,
+	.irq_startup    = apollo_irq_startup,
+	.irq_shutdown   = apollo_irq_shutdown,
+	.irq_eoi	= apollo_irq_eoi,
 };
 
 
 void __init dn_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int);
-	m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16);
+	m68k_setup_user_interrupt(VEC_USER + 96, 16);
+	m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
+				  IRQ_APOLLO, 16);
 }
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index 26a804e..6d196da 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -60,244 +60,8 @@
  * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
  * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
  * be allocated by atari_register_vme_int().
- *
- * Each interrupt can be of three types:
- *
- *  - SLOW: The handler runs with all interrupts enabled, except the one it
- *    was called by (to avoid reentering). This should be the usual method.
- *    But it is currently possible only for MFP ints, since only the MFP
- *    offers an easy way to mask interrupts.
- *
- *  - FAST: The handler runs with all interrupts disabled. This should be used
- *    only for really fast handlers, that just do actions immediately
- *    necessary, and let the rest do a bottom half or task queue.
- *
- *  - PRIORITIZED: The handler can be interrupted by higher-level ints
- *    (greater IPL, no MFP priorities!). This is the method of choice for ints
- *    which should be slow, but are not from a MFP.
- *
- * The feature of more than one handler for one int source is still there, but
- * only applicable if all handers are of the same type. To not slow down
- * processing of ints with only one handler by the chaining feature, the list
- * calling function atari_call_irq_list() is only plugged in at the time the
- * second handler is registered.
- *
- * Implementation notes: For fast-as-possible int handling, there are separate
- * entry points for each type (slow/fast/prio). The assembler handler calls
- * the irq directly in the usual case, no C wrapper is involved. In case of
- * multiple handlers, atari_call_irq_list() is registered as handler and calls
- * in turn the real irq's. To ease access from assembler level to the irq
- * function pointer and accompanying data, these two are stored in a separate
- * array, irq_handler[]. The rest of data (type, name) are put into a second
- * array, irq_param, that is accessed from C only. For each slow interrupt (32
- * in all) there are separate handler functions, which makes it possible to
- * hard-code the MFP register address and value, are necessary to mask the
- * int. If there'd be only one generic function, lots of calculations would be
- * needed to determine MFP register and int mask from the vector number :-(
- *
- * Furthermore, slow ints may not lower the IPL below its previous value
- * (before the int happened). This is needed so that an int of class PRIO, on
- * that this int may be stacked, cannot be reentered. This feature is
- * implemented as follows: If the stack frame format is 1 (throwaway), the int
- * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level
- * 2, which still blocks the HSYNC, but no interrupts of interest. If the
- * frame format is 0, the int is nested, and the old IPL value can be found in
- * the sr copy in the frame.
  */
 
-#if 0
-
-#define	NUM_INT_SOURCES	(8 + NUM_ATARI_SOURCES)
-
-typedef void (*asm_irq_handler)(void);
-
-struct irqhandler {
-	irqreturn_t (*handler)(int, void *, struct pt_regs *);
-	void	*dev_id;
-};
-
-struct irqparam {
-	unsigned long	flags;
-	const char	*devname;
-};
-
-/*
- * Array with irq's and their parameter data. This array is accessed from low
- * level assembler code, so an element size of 8 allows usage of index scaling
- * addressing mode.
- */
-static struct irqhandler irq_handler[NUM_INT_SOURCES];
-
-/*
- * This array hold the rest of parameters of int handlers: type
- * (slow,fast,prio) and the name of the handler. These values are only
- * accessed from C
- */
-static struct irqparam irq_param[NUM_INT_SOURCES];
-
-/* check for valid int number (complex, sigh...) */
-#define	IS_VALID_INTNO(n)											\
-	((n) > 0 &&														\
-	 /* autovec and ST-MFP ok anyway */								\
-	 (((n) < TTMFP_SOURCE_BASE) ||									\
-	  /* TT-MFP ok if present */									\
-	  ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE &&			\
-	   ATARIHW_PRESENT(TT_MFP)) ||									\
-	  /* SCC ok if present and number even */						\
-	  ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE &&			\
-	   !((n) & 1) && ATARIHW_PRESENT(SCC)) ||						\
-	  /* greater numbers ok if they are registered VME vectors */		\
-	  ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \
-		  free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE)))))
-
-
-/*
- * Here start the assembler entry points for interrupts
- */
-
-#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void)
-
-#define	BUILD_SLOW_IRQ(n)						   \
-asmlinkage void IRQ_NAME(n);						   \
-/* Dummy function to allow asm with operands.  */			   \
-void atari_slow_irq_##n##_dummy (void) {				   \
-__asm__ (__ALIGN_STR "\n"						   \
-"atari_slow_irq_" #n "_handler:\t"					   \
-"	addl	%6,%5\n"	/* preempt_count() += HARDIRQ_OFFSET */	   \
-	SAVE_ALL_INT "\n"						   \
-	GET_CURRENT(%%d0) "\n"						   \
-"	andb	#~(1<<(%c3&7)),%a4:w\n"	/* mask this interrupt */	   \
-	/* get old IPL from stack frame */				   \
-"	bfextu	%%sp@(%c2){#5,#3},%%d0\n"				   \
-"	movew	%%sr,%%d1\n"						   \
-"	bfins	%%d0,%%d1{#21,#3}\n"					   \
-"	movew	%%d1,%%sr\n"		/* set IPL = previous value */	   \
-"	addql	#1,%a0\n"						   \
-"	lea	%a1,%%a0\n"						   \
-"	pea	%%sp@\n"		/* push addr of frame */	   \
-"	movel	%%a0@(4),%%sp@-\n"	/* push handler data */		   \
-"	pea	(%c3+8)\n"		/* push int number */		   \
-"	movel	%%a0@,%%a0\n"						   \
-"	jbsr	%%a0@\n"		/* call the handler */		   \
-"	addql	#8,%%sp\n"						   \
-"	addql	#4,%%sp\n"						   \
-"	orw	#0x0600,%%sr\n"						   \
-"	andw	#0xfeff,%%sr\n"		/* set IPL = 6 again */		   \
-"	orb	#(1<<(%c3&7)),%a4:w\n"	/* now unmask the int again */	   \
-"	jbra	ret_from_interrupt\n"					   \
-	 : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),	   \
-	     "n" (PT_OFF_SR), "n" (n),					   \
-	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a)   \
-		        : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)		   \
-);									   \
-	for (;;);			/* fake noreturn */		   \
-}
-
-BUILD_SLOW_IRQ(0);
-BUILD_SLOW_IRQ(1);
-BUILD_SLOW_IRQ(2);
-BUILD_SLOW_IRQ(3);
-BUILD_SLOW_IRQ(4);
-BUILD_SLOW_IRQ(5);
-BUILD_SLOW_IRQ(6);
-BUILD_SLOW_IRQ(7);
-BUILD_SLOW_IRQ(8);
-BUILD_SLOW_IRQ(9);
-BUILD_SLOW_IRQ(10);
-BUILD_SLOW_IRQ(11);
-BUILD_SLOW_IRQ(12);
-BUILD_SLOW_IRQ(13);
-BUILD_SLOW_IRQ(14);
-BUILD_SLOW_IRQ(15);
-BUILD_SLOW_IRQ(16);
-BUILD_SLOW_IRQ(17);
-BUILD_SLOW_IRQ(18);
-BUILD_SLOW_IRQ(19);
-BUILD_SLOW_IRQ(20);
-BUILD_SLOW_IRQ(21);
-BUILD_SLOW_IRQ(22);
-BUILD_SLOW_IRQ(23);
-BUILD_SLOW_IRQ(24);
-BUILD_SLOW_IRQ(25);
-BUILD_SLOW_IRQ(26);
-BUILD_SLOW_IRQ(27);
-BUILD_SLOW_IRQ(28);
-BUILD_SLOW_IRQ(29);
-BUILD_SLOW_IRQ(30);
-BUILD_SLOW_IRQ(31);
-
-asm_irq_handler slow_handlers[32] = {
-	[0]	= atari_slow_irq_0_handler,
-	[1]	= atari_slow_irq_1_handler,
-	[2]	= atari_slow_irq_2_handler,
-	[3]	= atari_slow_irq_3_handler,
-	[4]	= atari_slow_irq_4_handler,
-	[5]	= atari_slow_irq_5_handler,
-	[6]	= atari_slow_irq_6_handler,
-	[7]	= atari_slow_irq_7_handler,
-	[8]	= atari_slow_irq_8_handler,
-	[9]	= atari_slow_irq_9_handler,
-	[10]	= atari_slow_irq_10_handler,
-	[11]	= atari_slow_irq_11_handler,
-	[12]	= atari_slow_irq_12_handler,
-	[13]	= atari_slow_irq_13_handler,
-	[14]	= atari_slow_irq_14_handler,
-	[15]	= atari_slow_irq_15_handler,
-	[16]	= atari_slow_irq_16_handler,
-	[17]	= atari_slow_irq_17_handler,
-	[18]	= atari_slow_irq_18_handler,
-	[19]	= atari_slow_irq_19_handler,
-	[20]	= atari_slow_irq_20_handler,
-	[21]	= atari_slow_irq_21_handler,
-	[22]	= atari_slow_irq_22_handler,
-	[23]	= atari_slow_irq_23_handler,
-	[24]	= atari_slow_irq_24_handler,
-	[25]	= atari_slow_irq_25_handler,
-	[26]	= atari_slow_irq_26_handler,
-	[27]	= atari_slow_irq_27_handler,
-	[28]	= atari_slow_irq_28_handler,
-	[29]	= atari_slow_irq_29_handler,
-	[30]	= atari_slow_irq_30_handler,
-	[31]	= atari_slow_irq_31_handler
-};
-
-asmlinkage void atari_fast_irq_handler( void );
-asmlinkage void atari_prio_irq_handler( void );
-
-/* Dummy function to allow asm with operands.  */
-void atari_fast_prio_irq_dummy (void) {
-__asm__ (__ALIGN_STR "\n"
-"atari_fast_irq_handler:\n\t"
-	"orw	#0x700,%%sr\n"		/* disable all interrupts */
-"atari_prio_irq_handler:\n\t"
-	"addl	%3,%2\n\t"		/* preempt_count() += HARDIRQ_OFFSET */
-	SAVE_ALL_INT "\n\t"
-	GET_CURRENT(%%d0) "\n\t"
-	/* get vector number from stack frame and convert to source */
-	"bfextu	%%sp@(%c1){#4,#10},%%d0\n\t"
-	"subw	#(0x40-8),%%d0\n\t"
-	"jpl	1f\n\t"
-	"addw	#(0x40-8-0x18),%%d0\n"
-    "1:\tlea	%a0,%%a0\n\t"
-	"addql	#1,%%a0@(%%d0:l:4)\n\t"
-	"lea	irq_handler,%%a0\n\t"
-	"lea	%%a0@(%%d0:l:8),%%a0\n\t"
-	"pea	%%sp@\n\t"		/* push frame address */
-	"movel	%%a0@(4),%%sp@-\n\t"	/* push handler data */
-	"movel	%%d0,%%sp@-\n\t"	/* push int number */
-	"movel	%%a0@,%%a0\n\t"
-	"jsr	%%a0@\n\t"		/* and call the handler */
-	"addql	#8,%%sp\n\t"
-	"addql	#4,%%sp\n\t"
-	"jbra	ret_from_interrupt"
-	 : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC),
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)
-);
-	for (;;);
-}
-#endif
-
 /*
  * Bitmap for free interrupt vector numbers
  * (new vectors starting from 0x70 can be allocated by
@@ -320,31 +84,44 @@
 
 extern int atari_SCC_reset_done;
 
-static int atari_startup_irq(unsigned int irq)
+static unsigned int atari_irq_startup(struct irq_data *data)
 {
-	m68k_irq_startup(irq);
+	unsigned int irq = data->irq;
+
+	m68k_irq_startup(data);
 	atari_turnon_irq(irq);
 	atari_enable_irq(irq);
 	return 0;
 }
 
-static void atari_shutdown_irq(unsigned int irq)
+static void atari_irq_shutdown(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	atari_disable_irq(irq);
 	atari_turnoff_irq(irq);
-	m68k_irq_shutdown(irq);
+	m68k_irq_shutdown(data);
 
 	if (irq == IRQ_AUTO_4)
 	    vectors[VEC_INT4] = falcon_hblhandler;
 }
 
-static struct irq_controller atari_irq_controller = {
+static void atari_irq_enable(struct irq_data *data)
+{
+	atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+	atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
 	.name		= "atari",
-	.lock		= __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock),
-	.startup	= atari_startup_irq,
-	.shutdown	= atari_shutdown_irq,
-	.enable		= atari_enable_irq,
-	.disable	= atari_disable_irq,
+	.irq_startup	= atari_irq_startup,
+	.irq_shutdown	= atari_irq_shutdown,
+	.irq_enable	= atari_irq_enable,
+	.irq_disable	= atari_irq_disable,
 };
 
 /*
@@ -360,8 +137,9 @@
 
 void __init atari_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
-	m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
+	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+	m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+				  NUM_ATARI_SOURCES - 1);
 
 	/* Initialize the MFP(s) */
 
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 1edd950..8128647 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -86,7 +86,7 @@
  */
 static void __init bvme6000_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 void __init config_bvme6000(void)
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index f6312c7..c87fe69 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -70,7 +70,7 @@
 
   asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
 
-  if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+  if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
     pr_err("Couldn't register timer interrupt\n");
 
   out_8(CLOCKBASE + CLKCR2, 0x1);		/* select CR1 */
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
index 870e534..db30ed2 100644
--- a/arch/m68k/include/asm/hardirq.h
+++ b/arch/m68k/include/asm/hardirq.h
@@ -18,6 +18,11 @@
 
 #ifdef CONFIG_MMU
 
+static inline void ack_bad_irq(unsigned int irq)
+{
+	pr_crit("unexpected IRQ trap at vector %02x\n", irq);
+}
+
 /* entry.S is sensitive to the offsets of these fields */
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 69ed0d74..6198df5 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -27,11 +27,6 @@
 
 #ifdef CONFIG_MMU
 
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
 /*
  * Interrupt source definitions
  * General interrupt sources are the level 1-7.
@@ -54,10 +49,6 @@
 
 #define IRQ_USER	8
 
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
 /*
  * various flags for request_irq() - the Amiga now uses the standard
  * mechanism like all other architectures - IRQF_DISABLED and
@@ -71,57 +62,27 @@
 #define IRQ_FLG_STD	(0x8000)	/* internally used		*/
 #endif
 
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
-	irqreturn_t	(*handler)(int, void *);
-	void		*dev_id;
-	struct irq_node *next;
-	unsigned long	flags;
-	const char	*devname;
-} irq_node_t;
+struct irq_data;
+struct irq_chip;
+struct irq_desc;
+extern unsigned int m68k_irq_startup(struct irq_data *data);
+extern unsigned int m68k_irq_startup_irq(unsigned int irq);
+extern void m68k_irq_shutdown(struct irq_data *data);
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int,
+						      struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt);
+extern void m68k_setup_irq_controller(struct irq_chip *,
+				      void (*handle)(unsigned int irq,
+						     struct irq_desc *desc),
+				      unsigned int irq, unsigned int cnt);
 
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
-	int		(*handler)(int, void *);
-	unsigned long	flags;
-	void		*dev_id;
-	const char	*devname;
-};
-
-struct irq_controller {
-	const char *name;
-	spinlock_t lock;
-	int (*startup)(unsigned int irq);
-	void (*shutdown)(unsigned int irq);
-	void (*enable)(unsigned int irq);
-	void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+extern unsigned int irq_canonicalize(unsigned int irq);
 
 #else
 #define irq_canonicalize(irq)  (irq)
 #endif /* CONFIG_MMU */
 
 asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+extern atomic_t irq_err_count;
 
 #endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
index c2a1c5e..12ebe43 100644
--- a/arch/m68k/include/asm/macintosh.h
+++ b/arch/m68k/include/asm/macintosh.h
@@ -12,6 +12,8 @@
 extern void mac_poweroff(void);
 extern void mac_init_IRQ(void);
 extern int mac_irq_pending(unsigned int);
+extern void mac_irq_enable(struct irq_data *data);
+extern void mac_irq_disable(struct irq_data *data);
 
 /*
  *	Floppy driver magic hook - probably shouldn't be here
diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h
index 3d970af..22f12c9 100644
--- a/arch/m68k/include/asm/q40ints.h
+++ b/arch/m68k/include/asm/q40ints.h
@@ -24,6 +24,3 @@
 #define Q40_IRQ10_MASK       (1<<5)
 #define Q40_IRQ14_MASK       (1<<6)
 #define Q40_IRQ15_MASK       (1<<7)
-
-extern unsigned long q40_probe_irq_on (void);
-extern int q40_probe_irq_off (unsigned long irqs);
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index e7f0f2e..c569619 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -6,16 +6,15 @@
 extra-$(CONFIG_SUN3)	:= sun3-head.o
 extra-y			+= vmlinux.lds
 
-obj-y	:= entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
-	   sys_m68k.o syscalltable.o time.o traps.o
+obj-y	:= entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
+	   signal.o sys_m68k.o syscalltable.o time.o traps.o
 
-obj-$(CONFIG_MMU)	+= ints.o devres.o vectors.o
-devres-$(CONFIG_MMU)	= ../../../kernel/irq/devres.o
+obj-$(CONFIG_MMU)	+= ints.o vectors.o
 
 ifndef CONFIG_MMU_SUN3
 obj-y			+= dma.o
 endif
 ifndef CONFIG_MMU
-obj-y			+= init_task.o irq.o
+obj-y			+= init_task.o
 endif
 
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
index bd0ec05..c713f51 100644
--- a/arch/m68k/kernel/entry_mm.S
+++ b/arch/m68k/kernel/entry_mm.S
@@ -48,7 +48,7 @@
 .globl sys_fork, sys_clone, sys_vfork
 .globl ret_from_interrupt, bad_interrupt
 .globl auto_irqhandler_fixup
-.globl user_irqvec_fixup, user_irqhandler_fixup
+.globl user_irqvec_fixup
 
 .text
 ENTRY(buserr)
@@ -207,7 +207,7 @@
 	movel	%sp,%sp@-
 	movel	%d0,%sp@-		|  put vector # on stack
 auto_irqhandler_fixup = . + 2
-	jsr	__m68k_handle_int	|  process the IRQ
+	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
 ret_from_interrupt:
@@ -240,8 +240,7 @@
 
 	movel	%sp,%sp@-
 	movel	%d0,%sp@-		|  put vector # on stack
-user_irqhandler_fixup = . + 2
-	jsr	__m68k_handle_int	|  process the IRQ
+	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
 	subqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index 761ee04..74fefac 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -4,25 +4,6 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 07/03/96: Timer initialization, and thus mach_sched_init(),
- *           removed from request_irq() and moved to init_time().
- *           We should therefore consider renaming our add_isr() and
- *           remove_isr() to request_irq() and free_irq()
- *           respectively, so they are compliant with the other
- *           architectures.                                     /Jes
- * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls.
- *           Removed irq list support, if any machine needs an irq server
- *           it must implement this itself (as it's already done), instead
- *           only default handler are used with mach_default_handler.
- *           request_irq got some flags different from other architectures:
- *           - IRQ_FLG_REPLACE : Replace an existing handler (the default one
- *                               can be replaced without this flag)
- *           - IRQ_FLG_LOCK : handler can't be replaced
- *           There are other machine depending flags, see there
- *           If you want to replace a default handler you should know what
- *           you're doing, since it might handle different other irq sources
- *           which must be served                               /Roman Zippel
  */
 
 #include <linux/module.h>
@@ -47,33 +28,22 @@
 #endif
 
 extern u32 auto_irqhandler_fixup[];
-extern u32 user_irqhandler_fixup[];
 extern u16 user_irqvec_fixup[];
 
-/* table for system interrupt handlers */
-static struct irq_node *irq_list[NR_IRQS];
-static struct irq_controller *irq_controller[NR_IRQS];
-static int irq_depth[NR_IRQS];
-
 static int m68k_first_user_vec;
 
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
 	.name		= "auto",
-	.lock		= __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
 };
 
-static struct irq_controller user_irq_controller = {
+static struct irq_chip user_irq_chip = {
 	.name		= "user",
-	.lock		= __SPIN_LOCK_UNLOCKED(user_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
 };
 
-#define NUM_IRQ_NODES 100
-static irq_node_t nodes[NUM_IRQ_NODES];
-
 /*
  * void init_IRQ(void)
  *
@@ -96,7 +66,7 @@
 	}
 
 	for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++)
-		irq_controller[i] = &auto_irq_controller;
+		irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq);
 
 	mach_init_IRQ();
 }
@@ -106,7 +76,7 @@
  * @handler: called from auto vector interrupts
  *
  * setup the handler to be called from auto vector interrupts instead of the
- * standard __m68k_handle_int(), it will be called with irq numbers in the range
+ * standard do_IRQ(), it will be called with irq numbers in the range
  * from IRQ_AUTO_1 - IRQ_AUTO_7.
  */
 void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *))
@@ -120,217 +90,49 @@
  * m68k_setup_user_interrupt
  * @vec: first user vector interrupt to handle
  * @cnt: number of active user vector interrupts
- * @handler: called from user vector interrupts
  *
  * setup user vector interrupts, this includes activating the specified range
  * of interrupts, only then these interrupts can be requested (note: this is
- * different from auto vector interrupts). An optional handler can be installed
- * to be called instead of the default __m68k_handle_int(), it will be called
- * with irq numbers starting from IRQ_USER.
+ * different from auto vector interrupts).
  */
-void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *))
+void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt)
 {
 	int i;
 
 	BUG_ON(IRQ_USER + cnt > NR_IRQS);
 	m68k_first_user_vec = vec;
 	for (i = 0; i < cnt; i++)
-		irq_controller[IRQ_USER + i] = &user_irq_controller;
+		irq_set_chip(IRQ_USER + i, &user_irq_chip);
 	*user_irqvec_fixup = vec - IRQ_USER;
-	if (handler)
-		*user_irqhandler_fixup = (u32)handler;
 	flush_icache();
 }
 
 /**
  * m68k_setup_irq_controller
- * @contr: irq controller which controls specified irq
+ * @chip: irq chip which controls specified irq
+ * @handle: flow handler which handles specified irq
  * @irq: first irq to be managed by the controller
+ * @cnt: number of irqs to be managed by the controller
  *
  * Change the controller for the specified range of irq, which will be used to
  * manage these irq. auto/user irq already have a default controller, which can
  * be changed as well, but the controller probably should use m68k_irq_startup/
  * m68k_irq_shutdown.
  */
-void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq,
+void m68k_setup_irq_controller(struct irq_chip *chip,
+			       irq_flow_handler_t handle, unsigned int irq,
 			       unsigned int cnt)
 {
 	int i;
 
-	for (i = 0; i < cnt; i++)
-		irq_controller[irq + i] = contr;
+	for (i = 0; i < cnt; i++) {
+		irq_set_chip(irq + i, chip);
+		if (handle)
+			irq_set_handler(irq + i, handle);
+	}
 }
 
-irq_node_t *new_irq_node(void)
-{
-	irq_node_t *node;
-	short i;
-
-	for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) {
-		if (!node->handler) {
-			memset(node, 0, sizeof(*node));
-			return node;
-		}
-	}
-
-	printk ("new_irq_node: out of nodes\n");
-	return NULL;
-}
-
-int setup_irq(unsigned int irq, struct irq_node *node)
-{
-	struct irq_controller *contr;
-	struct irq_node **prev;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d from %s\n",
-		       __func__, irq, node->devname);
-		return -ENXIO;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-
-	prev = irq_list + irq;
-	if (*prev) {
-		/* Can't share interrupts unless both agree to */
-		if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
-			spin_unlock_irqrestore(&contr->lock, flags);
-			return -EBUSY;
-		}
-		while (*prev)
-			prev = &(*prev)->next;
-	}
-
-	if (!irq_list[irq]) {
-		if (contr->startup)
-			contr->startup(irq);
-		else
-			contr->enable(irq);
-	}
-	node->next = NULL;
-	*prev = node;
-
-	spin_unlock_irqrestore(&contr->lock, flags);
-
-	return 0;
-}
-
-int request_irq(unsigned int irq,
-		irq_handler_t handler,
-		unsigned long flags, const char *devname, void *dev_id)
-{
-	struct irq_node *node;
-	int res;
-
-	node = new_irq_node();
-	if (!node)
-		return -ENOMEM;
-
-	node->handler = handler;
-	node->flags   = flags;
-	node->dev_id  = dev_id;
-	node->devname = devname;
-
-	res = setup_irq(irq, node);
-	if (res)
-		node->handler = NULL;
-
-	return res;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-	struct irq_controller *contr;
-	struct irq_node **p, *node;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n", __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-
-	p = irq_list + irq;
-	while ((node = *p)) {
-		if (node->dev_id == dev_id)
-			break;
-		p = &node->next;
-	}
-
-	if (node) {
-		*p = node->next;
-		node->handler = NULL;
-	} else
-		printk("%s: Removing probably wrong IRQ %d\n",
-		       __func__, irq);
-
-	if (!irq_list[irq]) {
-		if (contr->shutdown)
-			contr->shutdown(irq);
-		else
-			contr->disable(irq);
-	}
-
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(free_irq);
-
-void enable_irq(unsigned int irq)
-{
-	struct irq_controller *contr;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-	if (irq_depth[irq]) {
-		if (!--irq_depth[irq]) {
-			if (contr->enable)
-				contr->enable(irq);
-		}
-	} else
-		WARN_ON(1);
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(enable_irq);
-
-void disable_irq(unsigned int irq)
-{
-	struct irq_controller *contr;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-	if (!irq_depth[irq]++) {
-		if (contr->disable)
-			contr->disable(irq);
-	}
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(disable_irq);
-
-void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-
-EXPORT_SYMBOL(disable_irq_nosync);
-
-int m68k_irq_startup(unsigned int irq)
+unsigned int m68k_irq_startup_irq(unsigned int irq)
 {
 	if (irq <= IRQ_AUTO_7)
 		vectors[VEC_SPUR + irq] = auto_inthandler;
@@ -339,8 +141,15 @@
 	return 0;
 }
 
-void m68k_irq_shutdown(unsigned int irq)
+unsigned int m68k_irq_startup(struct irq_data *data)
 {
+	return m68k_irq_startup_irq(data->irq);
+}
+
+void m68k_irq_shutdown(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
 	if (irq <= IRQ_AUTO_7)
 		vectors[VEC_SPUR + irq] = bad_inthandler;
 	else
@@ -348,33 +157,6 @@
 }
 
 
-/*
- * Do we need these probe functions on the m68k?
- *
- *  ... may be useful with ISA devices
- */
-unsigned long probe_irq_on (void)
-{
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40)
-		return q40_probe_irq_on();
-#endif
-	return 0;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-int probe_irq_off (unsigned long irqs)
-{
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40)
-		return q40_probe_irq_off(irqs);
-#endif
-	return 0;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
 unsigned int irq_canonicalize(unsigned int irq)
 {
 #ifdef CONFIG_Q40
@@ -386,52 +168,9 @@
 
 EXPORT_SYMBOL(irq_canonicalize);
 
-asmlinkage void m68k_handle_int(unsigned int irq)
-{
-	struct irq_node *node;
-	kstat_cpu(0).irqs[irq]++;
-	node = irq_list[irq];
-	do {
-		node->handler(irq, node->dev_id);
-		node = node->next;
-	} while (node);
-}
-
-asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	old_regs = set_irq_regs(regs);
-	m68k_handle_int(irq);
-	set_irq_regs(old_regs);
-}
 
 asmlinkage void handle_badint(struct pt_regs *regs)
 {
-	kstat_cpu(0).irqs[0]++;
-	printk("unexpected interrupt from %u\n", regs->vector);
+	atomic_inc(&irq_err_count);
+	pr_warn("unexpected interrupt from %u\n", regs->vector);
 }
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	struct irq_controller *contr;
-	struct irq_node *node;
-	int i = *(loff_t *) v;
-
-	/* autovector interrupts */
-	if (irq_list[i]) {
-		contr = irq_controller[i];
-		node = irq_list[i];
-		seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname);
-		while ((node = node->next))
-			seq_printf(p, ", %s", node->devname);
-		seq_puts(p, "\n");
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-void init_irq_proc(void)
-{
-	/* Insert /proc/irq driver here */
-}
-#endif
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 2a96beb..b403924 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -11,6 +11,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -20,9 +21,6 @@
 
 /* #define DEBUG_IRQS */
 
-extern void mac_enable_irq(unsigned int);
-extern void mac_disable_irq(unsigned int);
-
 int baboon_present;
 static volatile struct baboon *baboon;
 static unsigned char baboon_disabled;
@@ -53,7 +51,7 @@
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-static irqreturn_t baboon_irq(int irq, void *dev_id)
+static void baboon_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_bit, irq_num;
 	unsigned char events;
@@ -64,15 +62,16 @@
 		(uint) baboon->mb_status);
 #endif
 
-	if (!(events = baboon->mb_ifr & 0x07))
-		return IRQ_NONE;
+	events = baboon->mb_ifr & 0x07;
+	if (!events)
+		return;
 
 	irq_num = IRQ_BABOON_0;
 	irq_bit = 1;
 	do {
 	        if (events & irq_bit) {
 			baboon->mb_ifr &= ~irq_bit;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		irq_bit <<= 1;
 		irq_num++;
@@ -82,7 +81,6 @@
 	/* for now we need to smash all interrupts */
 	baboon->mb_ifr &= ~events;
 #endif
-	return IRQ_HANDLED;
 }
 
 /*
@@ -92,8 +90,7 @@
 void __init baboon_register_interrupts(void)
 {
 	baboon_disabled = 0;
-	if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon))
-		pr_err("Couldn't register baboon interrupt\n");
+	irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
 }
 
 /*
@@ -111,7 +108,7 @@
 
 	baboon_disabled &= ~(1 << irq_idx);
 	if (!baboon_disabled)
-		mac_enable_irq(IRQ_NUBUS_C);
+		mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_disable(int irq)
@@ -124,7 +121,7 @@
 
 	baboon_disabled |= 1 << irq_idx;
 	if (baboon_disabled)
-		mac_disable_irq(IRQ_NUBUS_C);
+		mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_clear(int irq)
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index 1ad4e9d..a5462cc 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -305,15 +305,13 @@
 {
 	if (iop_ism_present) {
 		if (oss_present) {
-			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
-					IRQ_FLG_LOCK, "ISM IOP",
-					(void *) IOP_NUM_ISM))
+			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+					"ISM IOP", (void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
 			oss_irq_enable(IRQ_MAC_ADB);
 		} else {
-			if (request_irq(IRQ_VIA2_0, iop_ism_irq,
-					IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
-					(void *) IOP_NUM_ISM))
+			if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
+					(void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
 		}
 		if (!iop_alive(iop_base[IOP_NUM_ISM])) {
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index f92190c..ba220b7 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -190,14 +190,10 @@
 
 /* #define DEBUG_MACINTS */
 
-void mac_enable_irq(unsigned int irq);
-void mac_disable_irq(unsigned int irq);
-
-static struct irq_controller mac_irq_controller = {
+static struct irq_chip mac_irq_chip = {
 	.name		= "mac",
-	.lock		= __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
-	.enable		= mac_enable_irq,
-	.disable	= mac_disable_irq,
+	.irq_enable	= mac_irq_enable,
+	.irq_disable	= mac_irq_disable,
 };
 
 void __init mac_init_IRQ(void)
@@ -205,7 +201,7 @@
 #ifdef DEBUG_MACINTS
 	printk("mac_init_IRQ(): Setting things up...\n");
 #endif
-	m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
+	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
 				  NUM_MAC_SOURCES - IRQ_USER);
 	/* Make sure the SONIC interrupt is cleared or things get ugly */
 #ifdef SHUTUP_SONIC
@@ -241,16 +237,17 @@
 }
 
 /*
- *  mac_enable_irq - enable an interrupt source
- * mac_disable_irq - disable an interrupt source
+ *  mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
  *   mac_clear_irq - clears a pending interrupt
- * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
+ * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
  *
  * These routines are just dispatchers to the VIA/OSS/PSC routines.
  */
 
-void mac_enable_irq(unsigned int irq)
+void mac_irq_enable(struct irq_data *data)
 {
+	int irq = data->irq;
 	int irq_src = IRQ_SRC(irq);
 
 	switch(irq_src) {
@@ -283,8 +280,9 @@
 	}
 }
 
-void mac_disable_irq(unsigned int irq)
+void mac_irq_disable(struct irq_data *data)
 {
+	int irq = data->irq;
 	int irq_src = IRQ_SRC(irq);
 
 	switch(irq_src) {
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index a9c0f5a..a4c82da 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/macintosh.h>
@@ -29,10 +30,7 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-static irqreturn_t oss_irq(int, void *);
-static irqreturn_t oss_nubus_irq(int, void *);
-
-extern irqreturn_t via1_irq(int, void *);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
 
 /*
  * Initialize the OSS
@@ -60,26 +58,6 @@
 }
 
 /*
- * Register the OSS and NuBus interrupt dispatchers.
- */
-
-void __init oss_register_interrupts(void)
-{
-	if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
-			"scsi", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "scsi");
-	if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
-			"nubus", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "nubus");
-	if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
-			"sound", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "sound");
-	if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
-			"via1", (void *) via1))
-		pr_err("Couldn't register %s interrupt\n", "via1");
-}
-
-/*
  * Initialize OSS for Nubus access
  */
 
@@ -92,17 +70,17 @@
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-static irqreturn_t oss_irq(int irq, void *dev_id)
+static void oss_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int events;
 
 	events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 #ifdef DEBUG_IRQS
 	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
-		printk("oss_irq: irq %d events = 0x%04X\n", irq,
+		printk("oss_irq: irq %u events = 0x%04X\n", irq,
 			(int) oss->irq_pending);
 	}
 #endif
@@ -113,11 +91,10 @@
 		/* FIXME: call sound handler */
 	} else if (events & OSS_IP_SCSI) {
 		oss->irq_pending &= ~OSS_IP_SCSI;
-		m68k_handle_int(IRQ_MAC_SCSI);
+		generic_handle_irq(IRQ_MAC_SCSI);
 	} else {
 		/* FIXME: error check here? */
 	}
-	return IRQ_HANDLED;
 }
 
 /*
@@ -126,13 +103,13 @@
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int events, irq_bit, i;
 
 	events = oss->irq_pending & OSS_IP_NUBUS;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 #ifdef DEBUG_NUBUS_INT
 	if (console_loglevel > 7) {
@@ -148,10 +125,21 @@
 		irq_bit >>= 1;
 		if (events & irq_bit) {
 			oss->irq_pending &= ~irq_bit;
-			m68k_handle_int(NUBUS_SOURCE_BASE + i);
+			generic_handle_irq(NUBUS_SOURCE_BASE + i);
 		}
 	} while(events & (irq_bit - 1));
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the OSS and NuBus interrupt dispatchers.
+ */
+
+void __init oss_register_interrupts(void)
+{
+	irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
+	irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
 }
 
 /*
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index a4c3eb6..e6c2d20 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -18,6 +18,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -30,8 +31,6 @@
 int psc_present;
 volatile __u8 *psc;
 
-irqreturn_t psc_irq(int, void *);
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -112,52 +111,52 @@
 }
 
 /*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
-
-void __init psc_register_interrupts(void)
-{
-	if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
-		pr_err("Couldn't register psc%d interrupt\n", 3);
-	if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
-		pr_err("Couldn't register psc%d interrupt\n", 4);
-	if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
-		pr_err("Couldn't register psc%d interrupt\n", 5);
-	if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
-		pr_err("Couldn't register psc%d interrupt\n", 6);
-}
-
-/*
  * PSC interrupt handler. It's a lot like the VIA interrupt handler.
  */
 
-irqreturn_t psc_irq(int irq, void *dev_id)
+static void psc_irq(unsigned int irq, struct irq_desc *desc)
 {
-	int pIFR	= pIFRbase + ((int) dev_id);
-	int pIER	= pIERbase + ((int) dev_id);
+	unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+	int pIFR	= pIFRbase + offset;
+	int pIER	= pIERbase + offset;
 	int irq_num;
 	unsigned char irq_bit, events;
 
 #ifdef DEBUG_IRQS
-	printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n",
+	printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
 		irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
 #endif
 
 	events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = irq << 3;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			psc_write_byte(pIFR, irq_bit);
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		irq_num++;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ */
+
+void __init psc_register_interrupts(void)
+{
+	irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
+	irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
+	irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
+	irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
 }
 
 void psc_irq_enable(int irq) {
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index e71166d..f1600ad 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/macintosh.h>
@@ -77,9 +78,6 @@
 static u8 nubus_disabled;
 
 void via_debug_dump(void);
-irqreturn_t via1_irq(int, void *);
-irqreturn_t via2_irq(int, void *);
-irqreturn_t via_nubus_irq(int, void *);
 void via_irq_enable(int irq);
 void via_irq_disable(int irq);
 void via_irq_clear(int irq);
@@ -281,40 +279,11 @@
 	via1[vT1CL] = MAC_CLOCK_LOW;
 	via1[vT1CH] = MAC_CLOCK_HIGH;
 
-	if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+	if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
 		pr_err("Couldn't register %s interrupt\n", "timer");
 }
 
 /*
- * Register the interrupt dispatchers for VIA or RBV machines only.
- */
-
-void __init via_register_interrupts(void)
-{
-	if (via_alt_mapping) {
-		if (request_irq(IRQ_AUTO_1, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "software");
-		if (request_irq(IRQ_AUTO_6, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "via1");
-	} else {
-		if (request_irq(IRQ_AUTO_1, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "via1");
-	}
-	if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-			"via2", (void *) via2))
-		pr_err("Couldn't register %s interrupt\n", "via2");
-	if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
-			IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
-		pr_err("Couldn't register %s interrupt\n", "nubus");
-}
-
-/*
  * Debugging dump, used in various places to see what's going on.
  */
 
@@ -446,48 +415,46 @@
  * via6522.c :-), disable/pending masks added.
  */
 
-irqreturn_t via1_irq(int irq, void *dev_id)
+void via1_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_num;
 	unsigned char irq_bit, events;
 
 	events = via1[vIFR] & via1[vIER] & 0x7F;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = VIA1_SOURCE_BASE;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			via1[vIFR] = irq_bit;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		++irq_num;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
 }
 
-irqreturn_t via2_irq(int irq, void *dev_id)
+static void via2_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_num;
 	unsigned char irq_bit, events;
 
 	events = via2[gIFR] & via2[gIER] & 0x7F;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = VIA2_SOURCE_BASE;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			via2[gIFR] = irq_bit | rbv_clear;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		++irq_num;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
 }
 
 /*
@@ -495,7 +462,7 @@
  * VIA2 dispatcher as a fast interrupt handler.
  */
 
-irqreturn_t via_nubus_irq(int irq, void *dev_id)
+void via_nubus_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int slot_irq;
 	unsigned char slot_bit, events;
@@ -506,7 +473,7 @@
 	else
 		events &= ~via2[vDirA];
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	do {
 		slot_irq = IRQ_NUBUS_F;
@@ -514,7 +481,7 @@
 		do {
 			if (events & slot_bit) {
 				events &= ~slot_bit;
-				m68k_handle_int(slot_irq);
+				generic_handle_irq(slot_irq);
 			}
 			--slot_irq;
 			slot_bit >>= 1;
@@ -528,7 +495,24 @@
 		else
 			events &= ~via2[vDirA];
 	} while (events);
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the interrupt dispatchers for VIA or RBV machines only.
+ */
+
+void __init via_register_interrupts(void)
+{
+	if (via_alt_mapping) {
+		/* software interrupt */
+		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+		/* via1 interrupt */
+		irq_set_chained_handler(IRQ_AUTO_6, via1_irq);
+	} else {
+		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+	}
+	irq_set_chained_handler(IRQ_AUTO_2, via2_irq);
+	irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq);
 }
 
 void via_irq_enable(int irq) {
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 6cb9c3a..5de924e 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -81,7 +81,7 @@
 
 void __init mvme147_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 void __init config_mvme147(void)
@@ -114,8 +114,7 @@
 void mvme147_sched_init (irq_handler_t timer_routine)
 {
 	tick_handler = timer_routine;
-	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
-			"timer 1", NULL))
+	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
 		pr_err("Couldn't register timer interrupt\n");
 
 	/* Init the clock with a value */
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 0b28e26..31a66d9 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -117,7 +117,7 @@
 
 static void __init mvme16x_init_IRQ (void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 #define pcc2chip	((volatile u_char *)0xfff42000)
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 9f0e3d5..2b88849 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -15,10 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/ptrace.h>
 #include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/traps.h>
 
 #include <asm/q40_master.h>
@@ -35,35 +35,36 @@
 */
 
 static void q40_irq_handler(unsigned int, struct pt_regs *fp);
-static void q40_enable_irq(unsigned int);
-static void q40_disable_irq(unsigned int);
+static void q40_irq_enable(struct irq_data *data);
+static void q40_irq_disable(struct irq_data *data);
 
 unsigned short q40_ablecount[35];
 unsigned short q40_state[35];
 
-static int q40_irq_startup(unsigned int irq)
+static unsigned int q40_irq_startup(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	/* test for ISA ints not implemented by HW */
 	switch (irq) {
 	case 1: case 2: case 8: case 9:
 	case 11: case 12: case 13:
 		printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
-		return -ENXIO;
+		/* FIXME return -ENXIO; */
 	}
 	return 0;
 }
 
-static void q40_irq_shutdown(unsigned int irq)
+static void q40_irq_shutdown(struct irq_data *data)
 {
 }
 
-static struct irq_controller q40_irq_controller = {
+static struct irq_chip q40_irq_chip = {
 	.name		= "q40",
-	.lock		= __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock),
-	.startup	= q40_irq_startup,
-	.shutdown	= q40_irq_shutdown,
-	.enable		= q40_enable_irq,
-	.disable	= q40_disable_irq,
+	.irq_startup	= q40_irq_startup,
+	.irq_shutdown	= q40_irq_shutdown,
+	.irq_enable	= q40_irq_enable,
+	.irq_disable	= q40_irq_disable,
 };
 
 /*
@@ -81,13 +82,14 @@
 
 void __init q40_init_IRQ(void)
 {
-	m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX);
+	m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
+				  Q40_IRQ_MAX);
 
 	/* setup handler for ISA ints */
 	m68k_setup_auto_interrupt(q40_irq_handler);
 
-	m68k_irq_startup(IRQ_AUTO_2);
-	m68k_irq_startup(IRQ_AUTO_4);
+	m68k_irq_startup_irq(IRQ_AUTO_2);
+	m68k_irq_startup_irq(IRQ_AUTO_4);
 
 	/* now enable some ints.. */
 	master_outb(1, EXT_ENABLE_REG);  /* ISA IRQ 5-15 */
@@ -218,11 +220,11 @@
 	switch (irq) {
 	case 4:
 	case 6:
-		__m68k_handle_int(Q40_IRQ_SAMPLE, fp);
+		do_IRQ(Q40_IRQ_SAMPLE, fp);
 		return;
 	}
 	if (mir & Q40_IRQ_FRAME_MASK) {
-		__m68k_handle_int(Q40_IRQ_FRAME, fp);
+		do_IRQ(Q40_IRQ_FRAME, fp);
 		master_outb(-1, FRAME_CLEAR_REG);
 	}
 	if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
@@ -257,7 +259,7 @@
 					goto iirq;
 				}
 				q40_state[irq] |= IRQ_INPROGRESS;
-				__m68k_handle_int(irq, fp);
+				do_IRQ(irq, fp);
 				q40_state[irq] &= ~IRQ_INPROGRESS;
 
 				/* naively enable everything, if that fails than    */
@@ -288,25 +290,29 @@
 	mir = master_inb(IIRQ_REG);
 	/* should test whether keyboard irq is really enabled, doing it in defhand */
 	if (mir & Q40_IRQ_KEYB_MASK)
-		__m68k_handle_int(Q40_IRQ_KEYBOARD, fp);
+		do_IRQ(Q40_IRQ_KEYBOARD, fp);
 
 	return;
 }
 
-void q40_enable_irq(unsigned int irq)
+void q40_irq_enable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq >= 5 && irq <= 15) {
 		mext_disabled--;
 		if (mext_disabled > 0)
-			printk("q40_enable_irq : nested disable/enable\n");
+			printk("q40_irq_enable : nested disable/enable\n");
 		if (mext_disabled == 0)
 			master_outb(1, EXT_ENABLE_REG);
 	}
 }
 
 
-void q40_disable_irq(unsigned int irq)
+void q40_irq_disable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	/* disable ISA iqs : only do something if the driver has been
 	 * verified to be Q40 "compatible" - right now IDE, NE2K
 	 * Any driver should not attempt to sleep across disable_irq !!
@@ -319,13 +325,3 @@
 			printk("disable_irq nesting count %d\n",mext_disabled);
 	}
 }
-
-unsigned long q40_probe_irq_on(void)
-{
-	printk("irq probing not working - reconfigure the driver to avoid this\n");
-	return -1;
-}
-int q40_probe_irq_off(unsigned long irqs)
-{
-	return -1;
-}
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index 6464ad3..78b60f5 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -51,25 +51,29 @@
 
 static irqreturn_t sun3_int7(int irq, void *dev_id)
 {
-	*sun3_intreg |=  (1 << irq);
-	if (!(kstat_cpu(0).irqs[irq] % 2000))
-		sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]);
+	unsigned int cnt;
+
+	cnt = kstat_irqs_cpu(irq, 0);
+	if (!(cnt % 2000))
+		sun3_leds(led_pattern[cnt % 16000 / 2000]);
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t sun3_int5(int irq, void *dev_id)
 {
+	unsigned int cnt;
+
 #ifdef CONFIG_SUN3
 	intersil_clear();
 #endif
-        *sun3_intreg |=  (1 << irq);
 #ifdef CONFIG_SUN3
 	intersil_clear();
 #endif
 	xtime_update(1);
 	update_process_times(user_mode(get_irq_regs()));
-        if (!(kstat_cpu(0).irqs[irq] % 20))
-                sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]);
+	cnt = kstat_irqs_cpu(irq, 0);
+	if (!(cnt % 20))
+		sun3_leds(led_pattern[cnt % 160 / 20]);
 	return IRQ_HANDLED;
 }
 
@@ -79,29 +83,33 @@
 	return IRQ_HANDLED;
 }
 
-static void sun3_inthandle(unsigned int irq, struct pt_regs *fp)
+static void sun3_irq_enable(struct irq_data *data)
 {
-        *sun3_intreg &= ~(1 << irq);
+    sun3_enable_irq(data->irq);
+};
 
-	__m68k_handle_int(irq, fp);
-}
+static void sun3_irq_disable(struct irq_data *data)
+{
+    sun3_disable_irq(data->irq);
+};
 
-static struct irq_controller sun3_irq_controller = {
+static struct irq_chip sun3_irq_chip = {
 	.name		= "sun3",
-	.lock		= __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
-	.enable		= sun3_enable_irq,
-	.disable	= sun3_disable_irq,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
+	.irq_enable	= sun3_irq_enable,
+	.irq_disable	= sun3_irq_disable,
+	.irq_mask	= sun3_irq_disable,
+	.irq_unmask	= sun3_irq_enable,
 };
 
 void __init sun3_init_IRQ(void)
 {
 	*sun3_intreg = 1;
 
-	m68k_setup_auto_interrupt(sun3_inthandle);
-	m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
-	m68k_setup_user_interrupt(VEC_USER, 128, NULL);
+	m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
+				  7);
+	m68k_setup_user_interrupt(VEC_USER, 128);
 
 	if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
 		pr_err("Couldn't register %s interrupt\n", "int5");
diff --git a/arch/microblaze/include/asm/namei.h b/arch/microblaze/include/asm/namei.h
deleted file mode 100644
index 61d60b8..0000000
--- a/arch/microblaze/include/asm/namei.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_NAMEI_H
-#define _ASM_MICROBLAZE_NAMEI_H
-
-#ifdef __KERNEL__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-#define __emul_prefix() NULL
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_NAMEI_H */
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 9b4cb00..0be3186 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -286,11 +286,11 @@
 archprepare:
 ifdef CONFIG_MIPS32_N32
 	@echo '  Checking missing-syscalls for N32'
-	$(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32"
+	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
 endif
 ifdef CONFIG_MIPS32_O32
 	@echo '  Checking missing-syscalls for O32'
-	$(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32"
+	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
 endif
 
 install:
diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c
index 975c203..0a430e0 100644
--- a/arch/mips/cavium-octeon/flash_setup.c
+++ b/arch/mips/cavium-octeon/flash_setup.c
@@ -17,8 +17,6 @@
 
 static struct map_info flash_map;
 static struct mtd_info *mymtd;
-static int nr_parts;
-static struct mtd_partition *parts;
 static const char *part_probe_types[] = {
 	"cmdlinepart",
 #ifdef CONFIG_MTD_REDBOOT_PARTS
@@ -61,11 +59,8 @@
 		mymtd = do_map_probe("cfi_probe", &flash_map);
 		if (mymtd) {
 			mymtd->owner = THIS_MODULE;
-
-			nr_parts = parse_mtd_partitions(mymtd,
-							part_probe_types,
-							&parts, 0);
-			mtd_device_register(mymtd, parts, nr_parts);
+			mtd_device_parse_register(mymtd, part_probe_types,
+						  0, NULL, 0);
 		} else {
 			pr_err("Failed to register MTD device for flash\n");
 		}
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 8b60642..efcfff4 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -207,8 +207,9 @@
 	 * the other bits alone.
 	 */
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff);
-	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
-			"SMP-IPI", mailbox_interrupt)) {
+	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI",
+			mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
 }
diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c
index 708f087..cae4225 100644
--- a/arch/mips/emma/common/prom.c
+++ b/arch/mips/emma/common/prom.c
@@ -50,7 +50,7 @@
 
 	/* arg[0] is "g", the rest is boot parameters */
 	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
 		    >= sizeof(arcs_cmdline))
 			break;
 		strcat(arcs_cmdline, arg[i]);
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
index 76961ca..2ef17e8 100644
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -36,6 +36,8 @@
 	return -EINVAL;
 }
 
+#define gpio_get_value_cansleep	gpio_get_value
+
 static inline void gpio_set_value(unsigned gpio, int value)
 {
 	switch (bcm47xx_bus_type) {
@@ -54,6 +56,19 @@
 	}
 }
 
+#define gpio_set_value_cansleep gpio_set_value
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return 0;
+}
+
+static inline int gpio_is_valid(unsigned gpio)
+{
+	return gpio < (BCM47XX_EXTIF_GPIO_LINES + BCM47XX_CHIPCO_GPIO_LINES);
+}
+
+
 static inline int gpio_direction_input(unsigned gpio)
 {
 	switch (bcm47xx_bus_type) {
@@ -137,7 +152,4 @@
 }
 
 
-/* cansleep wrappers */
-#include <asm-generic/gpio.h>
-
 #endif /* __BCM47XX_GPIO_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index ecea787..d8dad53 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -365,16 +365,18 @@
 #define __NR_syncfs			(__NR_Linux + 342)
 #define __NR_sendmmsg			(__NR_Linux + 343)
 #define __NR_setns			(__NR_Linux + 344)
+#define __NR_process_vm_readv		(__NR_Linux + 345)
+#define __NR_process_vm_writev		(__NR_Linux + 346)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		344
+#define __NR_Linux_syscalls		346
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		344
+#define __NR_O32_Linux_syscalls		346
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -686,16 +688,18 @@
 #define __NR_syncfs			(__NR_Linux + 301)
 #define __NR_sendmmsg			(__NR_Linux + 302)
 #define __NR_setns			(__NR_Linux + 303)
+#define __NR_process_vm_readv		(__NR_Linux + 304)
+#define __NR_process_vm_writev		(__NR_Linux + 305)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		303
+#define __NR_Linux_syscalls		305
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		303
+#define __NR_64_Linux_syscalls		305
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1012,16 +1016,18 @@
 #define __NR_syncfs			(__NR_Linux + 306)
 #define __NR_sendmmsg			(__NR_Linux + 307)
 #define __NR_setns			(__NR_Linux + 308)
+#define __NR_process_vm_readv		(__NR_Linux + 309)
+#define __NR_process_vm_writev		(__NR_Linux + 310)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		308
+#define __NR_Linux_syscalls		310
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		308
+#define __NR_N32_Linux_syscalls		310
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 98c5a97..e2d8e19 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -103,19 +103,10 @@
 
 /*
  * Compare interrupt can be routed and latched outside the core,
- * so a single execution hazard barrier may not be enough to give
- * it time to clear as seen in the Cause register.  4 time the
- * pipeline depth seems reasonably conservative, and empirically
- * works better in configurations with high CPU/bus clock ratios.
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
+ * changes to propagate to the cause register.
  */
-
-#define compare_change_hazard() \
-	do { \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-		irq_disable_hazard(); \
-	} while (0)
+#define COMPARE_INT_SEEN_TICKS 50
 
 int c0_compare_int_usable(void)
 {
@@ -126,8 +117,12 @@
 	 * IP7 already pending?  Try to clear it by acking the timer.
 	 */
 	if (c0_compare_int_pending()) {
-		write_c0_compare(read_c0_count());
-		compare_change_hazard();
+		cnt = read_c0_count();
+		write_c0_compare(cnt);
+		back_to_back_c0_hazard();
+		while (read_c0_count() < (cnt  + COMPARE_INT_SEEN_TICKS))
+			if (!c0_compare_int_pending())
+				break;
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -136,7 +131,7 @@
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		compare_change_hazard();
+		back_to_back_c0_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -145,12 +140,17 @@
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
-	compare_change_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (c0_compare_int_pending())
+			break;
 	if (!c0_compare_int_pending())
 		return 0;
-
-	write_c0_compare(read_c0_count());
-	compare_change_hazard();
+	cnt = read_c0_count();
+	write_c0_compare(cnt);
+	back_to_back_c0_hazard();
+	while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
+		if (!c0_compare_int_pending())
+			break;
 	if (c0_compare_int_pending())
 		return 0;
 
diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c
index cefc6e2..5426779 100644
--- a/arch/mips/kernel/cpufreq/loongson2_clock.c
+++ b/arch/mips/kernel/cpufreq/loongson2_clock.c
@@ -7,6 +7,7 @@
  * for more details.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 4792065..a632bc1 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -591,6 +591,8 @@
 	sys	sys_syncfs		1
 	sys	sys_sendmmsg		4
 	sys	sys_setns		2
+	sys	sys_process_vm_readv	6	/* 4345 */
+	sys	sys_process_vm_writev	6
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index fb7334b..3b5a5e9 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -430,4 +430,6 @@
 	PTR	sys_syncfs
 	PTR	sys_sendmmsg
 	PTR	sys_setns
+	PTR	sys_process_vm_readv
+	PTR	sys_process_vm_writev		/* 5305 */
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 6de1f59..6be6f70 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -430,4 +430,6 @@
 	PTR	sys_syncfs
 	PTR	compat_sys_sendmmsg
 	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv
+	PTR	compat_sys_process_vm_writev	/* 6310 */
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 1d81316..5422855 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -548,4 +548,6 @@
 	PTR	sys_syncfs
 	PTR	compat_sys_sendmmsg
 	PTR	sys_setns
+	PTR	compat_sys_process_vm_readv	/* 4345 */
+	PTR	compat_sys_process_vm_writev
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 261ccbc..5c8a49d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1596,7 +1596,8 @@
 	}
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+	if (!cpu_data[cpu].asid_cache)
+		cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index 7e9c0ff..77ed70f 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -7,7 +7,7 @@
  * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
index 44a3677..de1cb2b 100644
--- a/arch/mips/lantiq/devices.c
+++ b/arch/mips/lantiq/devices.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 56ba007..e34fcfd 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c
index 9b8af77..1ff6c9d 100644
--- a/arch/mips/lantiq/setup.c
+++ b/arch/mips/lantiq/setup.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
index 22d823a..6522583 100644
--- a/arch/mips/lantiq/xway/clk-ase.c
+++ b/arch/mips/lantiq/xway/clk-ase.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
index ddd3959..696b1a3 100644
--- a/arch/mips/lantiq/xway/clk-xway.c
+++ b/arch/mips/lantiq/xway/clk-xway.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
index d0e32ab..d614aa7 100644
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 4278a45..cbb6ae5 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/export.h>
 
 #include <lantiq_soc.h>
 #include <xway_dma.h>
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index a321451..d2fa98f 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/slab.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/ioport.h>
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
index a479355..b91c7f1 100644
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -7,7 +7,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
index 67d59d6..ff9991c 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -9,7 +9,7 @@
 
 #include <linux/slab.h>
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
index abe49f4..ae4959a 100644
--- a/arch/mips/lantiq/xway/prom-ase.c
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -6,7 +6,7 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
index 1686692a..2228133 100644
--- a/arch/mips/lantiq/xway/prom-xway.c
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -6,7 +6,7 @@
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/clk.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index a1be36d..3d41f0b 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -10,7 +10,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <asm/reboot.h>
 
 #include <lantiq_soc.h>
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
deleted file mode 100644
index 98e86dd..0000000
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *
- * Author: source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <pci.h>
-#include <glb.h>
-#include <nand.h>
-
-static struct resource pci_io_resource = {
-	.start	= PNX8550_PCIIO + 0x1000,	/* reserve regacy I/O space */
-	.end	= PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
-	.name	= "pci IO space",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.start	= PNX8550_PCIMEM,
-	.end	= PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
-	.name	= "pci memory space",
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops pnx8550_pci_ops;
-
-static struct pci_controller pnx8550_controller = {
-	.pci_ops	= &pnx8550_pci_ops,
-	.io_map_base	= PNX8550_PORT_BASE,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-};
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-static inline unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-static int __init pnx8550_pci_setup(void)
-{
-	int pci_mem_code;
-	int mem_size = get_system_mem_size() >> 20;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* Calc the PCI mem size code */
-	if (mem_size >= 128)
-		pci_mem_code = SIZE_128M;
-	else if (mem_size >= 64)
-		pci_mem_code = SIZE_64M;
-	else if (mem_size >= 32)
-		pci_mem_code = SIZE_32M;
-	else
-		pci_mem_code = SIZE_16M;
-
-	/* Set PCI_XIO registers */
-	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
-	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
-	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
-	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
-
-	/* Send memory transaction via PCI_BASE2 */
-	outl(0x00000001, PCI_BASE | PCI_IO);
-
-	/* Unlock the setup register */
-	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
-
-	/*
-	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
-	 * to work, and in order for bus_to_baddr to work without any
-	 * hacks.
-	 */
-	outl(0x00000000, PCI_BASE | PCI_BASE10);
-
-	/*
-	 *These two bars are set by default or the boot code.
-	 * However, it's safer to set them here so we're not boot
-	 * code dependent.
-	 */
-	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
-	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
-
-	outl(PCI_EN_TA |
-	     PCI_EN_PCI2MMI |
-	     PCI_EN_XIO |
-	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
-	     PCI_SETUP_BASE18_EN |
-	     PCI_SETUP_BASE14_EN |
-	     PCI_SETUP_BASE10_PREF |
-	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
-	     PCI_SETUP_CFGMANAGE_EN |
-	     PCI_SETUP_PCIARB_EN,
-	     PCI_BASE |
-	     PCI_SETUP);	/* PCI_SETUP */
-	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
-
-	register_pci_controller(&pnx8550_controller);
-
-	return 0;
-}
-
-arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
deleted file mode 100644
index 71adac3..0000000
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- *  Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	},
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
-	/* Read IP2031_RANK0_ADDR_LO */
-	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
-	/* Read IP2031_RANK1_ADDR_HI */
-	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
-	return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	char* argptr;
-
-	board_setup();  /* board specific setup */
-
-        _machine_restart = pnx8550_machine_restart;
-        _machine_halt = pnx8550_machine_halt;
-        pm_power_off = pnx8550_machine_power_off;
-
-	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
-	   Bit 1:Enable DAC Powerdown
-	  -> 0:DACs are enabled and are working normally
-	     1:DACs are powerdown
-	   Bit 0:Enable of PCI inta output
-	  -> 0 = Disable PCI inta output
-	     1 = Enable PCI inta output
-	*/
-	PNX8550_GLB2_ENAB_INTA_O = 0;
-
-	/* IO/MEM resources. */
-	set_io_port_base(PNX8550_PORT_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = ~0;
-	iomem_resource.start = 0;
-	iomem_resource.end = ~0;
-
-	/* Request I/O space for devices on this board */
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, standard_io_resources + i);
-
-	/* Place the Mode Control bit for GPIO pin 16 in primary function */
-	/* Pin 16 is used by UART1, UA1_TX                                */
-	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
-			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
-			PNX8550_GPIO_MC1);
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
-		argptr += strlen("console=ttyS");
-		pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
-		/* We must initialize the UART (console) before early printk */
-		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
-		ip3106_lcr(UART_BASE, pnx8550_console_port) =
-			PNX8XXX_UART_LCR_8BIT;
-		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
-	}
-}
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 4ee5710..b5ce041 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -7,6 +7,7 @@
  * Support for all devices (greater than 16) added by David Gathright.
  */
 
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 8656388..be1e1af 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 
 #include <asm/pci.h>
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index cf4c868..dcc926e 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -102,7 +102,7 @@
 
 	/* Get the boot parameters */
 	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1) >=
+		if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 >=
 		    sizeof(arcs_cmdline))
 			break;
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b177caa..951e18f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -345,7 +345,7 @@
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 57af16e..70ba0c0 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -255,12 +255,6 @@
 		echo 'disable kernel modules' ; \
 		false ; \
 	fi
-	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
-		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
-		echo 'correctly with old versions of binutils.' ; \
-		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
-		false ; \
-	fi
 
 CLEAN_FILES += $(TOUT)
 
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
new file mode 100644
index 0000000..0e00e50
--- /dev/null
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -0,0 +1,236 @@
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anon,charon";
+	compatible = "anon,charon";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			device_type = "dma-controller";
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2400 {		// PSC3
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			fixed-link = <1 1 100 0 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			dtt@28 {
+				compatible = "national,lm80";
+				reg = <0x28>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <	0 0 0xfc000000 0x02000000
+				1 0 0xe0000000 0x04000000 // CS1 range, SM501
+				3 0 0xe8000000 0x00080000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+
+		display@1,0 {
+			compatible = "smi,sm501";
+			reg = <1 0x00000000 0x00800000
+			       1 0x03e00000 0x00200000>;
+			mode = "640x480-32@60";
+			interrupts = <1 1 3>;
+			little-endian;
+		};
+
+		mram0@3,0 {
+			compatible = "mtd-ram";
+			reg = <3 0x00000 0x80000>;
+			bank-width = <1>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 959cd2c..716a37b 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,9 +1,10 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
+CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
 # CONFIG_EPOLL is not set
@@ -17,7 +18,6 @@
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
 CONFIG_NET=y
@@ -38,17 +38,18 @@
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
@@ -56,13 +57,11 @@
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC_MPC52xx=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
@@ -70,7 +69,13 @@
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_SENSORS_LM80=y
 CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -80,10 +85,10 @@
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -102,7 +107,6 @@
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 84a685a5..535711f 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -485,3 +485,7 @@
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 96a58b7..a72f241 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -362,3 +362,7 @@
 CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_VHOST_NET=m
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index e2a4c26..02e41b5 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -49,13 +49,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -85,13 +85,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -119,13 +119,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -163,13 +163,13 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -194,7 +194,7 @@
 	int t;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
@@ -202,7 +202,7 @@
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
@@ -226,7 +226,7 @@
 	int t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
@@ -234,7 +234,7 @@
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"	: "=&b" (t)
 	: "r" (&v->counter)
@@ -285,12 +285,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_add_return\n\
 	add	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -319,12 +319,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
 	subf	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -351,12 +351,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%1 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -393,12 +393,12 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -418,13 +418,13 @@
 	long t;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
 	addic.	%0,%0,-1\n\
 	blt-	2f\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"	: "=&r" (t)
 	: "r" (&v->counter)
@@ -450,14 +450,14 @@
 	long t;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%1		# __atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index e137afc..efdc926 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -124,14 +124,14 @@
 	return (old & mask);				\
 }
 
-DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER,
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
 DEFINE_TESTOP(test_and_set_bits_lock, or, "",
 	      PPC_ACQUIRE_BARRIER, 1)
-DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
-DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
-	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER,
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
+	      PPC_ATOMIC_EXIT_BARRIER, 0)
 
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
index 24bd34c..936a904 100644
--- a/arch/powerpc/include/asm/floppy.h
+++ b/arch/powerpc/include/asm/floppy.h
@@ -108,10 +108,10 @@
 {
 	if (can_use_virtual_dma)
 		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", NULL);
+				   0, "floppy", NULL);
 	else
 		return request_irq(FLOPPY_IRQ, floppy_interrupt,
-				   IRQF_DISABLED, "floppy", NULL);
+				   0, "floppy", NULL);
 }
 
 static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index c94e4a3..2a9cf84 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -11,12 +11,13 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
-	PPC_RELEASE_BARRIER \
+	PPC_ATOMIC_ENTRY_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
 	PPC405_ERR77(0, %2) \
 "2:	stwcx.	%1,0,%2\n" \
 	"bne-	1b\n" \
+	PPC_ATOMIC_EXIT_BARRIER \
 	"li	%1,0\n" \
 "3:	.section .fixup,\"ax\"\n" \
 "4:	li	%1,%3\n" \
@@ -92,14 +93,14 @@
 		return -EFAULT;
 
         __asm__ __volatile__ (
-        PPC_RELEASE_BARRIER
+        PPC_ATOMIC_ENTRY_BARRIER
 "1:     lwarx   %1,0,%3         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%1,%4\n\
         bne-    3f\n"
         PPC405_ERR77(0,%3)
 "2:     stwcx.  %5,0,%3\n\
         bne-    1b\n"
-        PPC_ACQUIRE_BARRIER
+        PPC_ATOMIC_EXIT_BARRIER
 "3:	.section .fixup,\"ax\"\n\
 4:	li	%0,%6\n\
 	b	3b\n\
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index 08fe69e..0ad432b 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -149,12 +149,6 @@
 #define KVM_SREGS_E_UPDATE_DBSR		(1 << 3)
 
 /*
- * Book3S special bits to indicate contents in the struct by maintaining
- * backwards compatibility with older structs. If adding a new field,
- * please make sure to add a flag for that new field */
-#define KVM_SREGS_S_HIOR		(1 << 0)
-
-/*
  * In KVM_SET_SREGS, reserved/pad fields must be left untouched from a
  * previous KVM_GET_REGS.
  *
@@ -179,8 +173,6 @@
 				__u64 ibat[8]; 
 				__u64 dbat[8]; 
 			} ppc32;
-			__u64 flags; /* KVM_SREGS_S_ */
-			__u64 hior;
 		} s;
 		struct {
 			union {
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index a384ffd..d4df013 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -90,8 +90,6 @@
 #endif
 	int context_id[SID_CONTEXTS];
 
-	bool hior_sregs;		/* HIOR is set by SREGS, not PVR */
-
 	struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE];
 	struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG];
 	struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE];
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index 9cd5fc8..f77c708 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -316,7 +316,7 @@
 LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
 LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
 LV1_CALL(gpu_context_intr,                              1, 1, 227 )
-LV1_CALL(gpu_attribute,                                 5, 0, 228 )
+LV1_CALL(gpu_attribute,                                 3, 0, 228 )
 LV1_CALL(get_rtc,                                       0, 2, 232 )
 LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
 LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 28cdbd9..03c48e8 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -31,7 +31,7 @@
 
 #define MSR_		MSR_ME | MSR_CE
 #define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
 #define MSR_USER64	MSR_USER32 | MSR_64BIT
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 6fbce72..a0f358d 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -8,7 +8,7 @@
 
 #ifdef __powerpc64__
 
-extern char _end[];
+extern char __end_interrupts[];
 
 static inline int in_kernel_text(unsigned long addr)
 {
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
index d7cab44..e682a71 100644
--- a/arch/powerpc/include/asm/synch.h
+++ b/arch/powerpc/include/asm/synch.h
@@ -13,6 +13,7 @@
 extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
 extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
 			     void *fixup_end);
+extern void do_final_fixups(void);
 
 static inline void eieio(void)
 {
@@ -41,11 +42,15 @@
 	START_LWSYNC_SECTION(97);			\
 	isync;						\
 	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
-#define PPC_ACQUIRE_BARRIER	"\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
-#define PPC_RELEASE_BARRIER	stringify_in_c(LWSYNC) "\n"
+#define PPC_ACQUIRE_BARRIER	 "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER	 stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_EXIT_BARRIER	 "\n" stringify_in_c(sync) "\n"
 #else
 #define PPC_ACQUIRE_BARRIER
 #define PPC_RELEASE_BARRIER
+#define PPC_ATOMIC_ENTRY_BARRIER
+#define PPC_ATOMIC_EXIT_BARRIER
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
index bd6c401..c48de98 100644
--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@@ -15,8 +15,8 @@
 #define	DEFAULT_PRIORITY	5
 
 /*
- * Mark IPIs as higher priority so we can take them inside interrupts that
- * arent marked IRQF_DISABLED
+ * Mark IPIs as higher priority so we can take them inside interrupts
+ * FIXME: still true now?
  */
 #define IPI_PRIORITY		4
 
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 56212bc..4f80cf1 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -215,7 +215,22 @@
 	stw	r9,8(r1)
 	stw	r11,12(r1)
 	stw	r3,ORIG_GPR3(r1)
+	/*
+	 * The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
+	 * If from user mode there is only one stack frame on the stack, and
+	 * accessing CALLER_ADDR1 will cause oops. So we need create a dummy
+	 * stack frame to make trace_hardirqs_off happy.
+	 */
+	andi.	r12,r12,MSR_PR
+	beq	11f
+	stwu	r1,-16(r1)
 	bl	trace_hardirqs_off
+	addi	r1,r1,16
+	b	12f
+
+11:
+	bl	trace_hardirqs_off
+12:
 	lwz	r0,GPR0(r1)
 	lwz	r3,ORIG_GPR3(r1)
 	lwz	r4,GPR4(r1)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index a54d92f..cf9c69b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -267,7 +267,7 @@
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
 #endif /* CONFIG_CBE_RAS */
 
 	STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
@@ -275,7 +275,7 @@
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
 #endif /* CONFIG_CBE_RAS */
 
 	STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
@@ -283,7 +283,7 @@
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
 #endif /* CONFIG_CBE_RAS */
 
 	. = 0x3000
diff --git a/arch/powerpc/kernel/jump_label.c b/arch/powerpc/kernel/jump_label.c
index 368d158..a1ed8a8 100644
--- a/arch/powerpc/kernel/jump_label.c
+++ b/arch/powerpc/kernel/jump_label.c
@@ -11,6 +11,7 @@
 #include <linux/jump_label.h>
 #include <asm/code-patching.h>
 
+#ifdef HAVE_JUMP_LABEL
 void arch_jump_label_transform(struct jump_entry *entry,
 			       enum jump_label_type type)
 {
@@ -21,3 +22,4 @@
 	else
 		patch_instruction(addr, PPC_INST_NOP);
 }
+#endif
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 35f2764..2985338 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -132,7 +132,6 @@
 	/* On relocatable kernels interrupts handlers and our code
 	   can be in different regions, so we don't patch them */
 
-	extern u32 __end_interrupts;
 	if ((ulong)inst < (ulong)&__end_interrupts)
 		return;
 #endif
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index f7d760a..7cd07b4 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -738,7 +738,7 @@
 	mr      r5, r31
 
 	li	r0, 0
-#elif defined(CONFIG_44x)  && !defined(CONFIG_47x)
+#elif defined(CONFIG_44x)  && !defined(CONFIG_PPC_47x)
 
 /*
  * Code for setting up 1:1 mapping for PPC440x for KEXEC
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9054ca9..6457574 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -486,28 +486,6 @@
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
-#if defined(CONFIG_PPC_BOOK3E_64)
-	/* XXX Current Book3E code doesn't deal with kernel side DBCR0,
-	 * we always hold the user values, so we set it now.
-	 *
-	 * However, we ensure the kernel MSR:DE is appropriately cleared too
-	 * to avoid spurrious single step exceptions in the kernel.
-	 *
-	 * This will have to change to merge with the ppc32 code at some point,
-	 * but I don't like much what ppc32 is doing today so there's some
-	 * thinking needed there
-	 */
-	if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
-		u32 dbcr0;
-
-		mtmsr(mfmsr() & ~MSR_DE);
-		isync();
-		dbcr0 = mfspr(SPRN_DBCR0);
-		dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
-		mtspr(SPRN_DBCR0, dbcr0);
-	}
-#endif /* CONFIG_PPC64_BOOK3E */
-
 #ifdef CONFIG_PPC64
 	/*
 	 * Collect processor utilization data per process
@@ -657,7 +635,7 @@
 	if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
 		printk("CFAR: "REG"\n", regs->orig_gpr3);
 	if (trap == 0x300 || trap == 0x600)
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 		printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
 #else
 		printk("DAR: "REG", DSISR: %08lx\n", regs->dar, regs->dsisr);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index b4fa661..cc58486 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1579,10 +1579,8 @@
 		return;
 
 	base = alloc_down(size, PAGE_SIZE, 0);
-	if (base == 0) {
-		prom_printf("RTAS allocation failed !\n");
-		return;
-	}
+	if (base == 0)
+		prom_panic("Could not allocate memory for RTAS\n");
 
 	rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
 	if (!IHANDLE_VALID(rtas_inst)) {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index c1ce863..ac76108 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -107,6 +107,8 @@
 			 PTRRELOC(&__start___lwsync_fixup),
 			 PTRRELOC(&__stop___lwsync_fixup));
 
+	do_final_fixups();
+
 	return KERNELBASE + offset;
 }
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 1a9dea8..fb9bb46 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -359,6 +359,7 @@
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
 	do_lwsync_fixups(cur_cpu_spec->cpu_features,
 			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
+	do_final_fixups();
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 78b76dc..836a5a1 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -97,7 +97,7 @@
 	compat_sigset_t	cset;
 
 	switch (_NSIG_WORDS) {
-	case 4: cset.sig[5] = set->sig[3] & 0xffffffffull;
+	case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
 		cset.sig[7] = set->sig[3] >> 32;
 	case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
 		cset.sig[5] = set->sig[2] >> 32;
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 25ddbfc..6df7090 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -187,7 +187,7 @@
 		return 1;
 	}
 #endif
-	err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU,
+	err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
 			  smp_ipi_name[msg], 0);
 	WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
 		virq, smp_ipi_name[msg], err);
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4e59082..5459d14 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1298,14 +1298,12 @@
 
 		if (user_mode(regs)) {
 			current->thread.dbcr0 &= ~DBCR0_IC;
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
 					       current->thread.dbcr1))
 				regs->msr |= MSR_DE;
 			else
 				/* Make sure the IDM bit is off */
 				current->thread.dbcr0 &= ~DBCR0_IDM;
-#endif
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 0cdbc07..0cb137a 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -44,6 +44,7 @@
 #include <asm/processor.h>
 #include <asm/cputhreads.h>
 #include <asm/page.h>
+#include <asm/hvcall.h>
 #include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index f422231..44d8829 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1263,7 +1263,7 @@
 	addi	r6,r5,VCORE_NAPPING_THREADS
 31:	lwarx	r4,0,r6
 	or	r4,r4,r0
-	popcntw	r7,r4
+	PPC_POPCNTW(r7,r4)
 	cmpw	r7,r8
 	bge	2f
 	stwcx.	r4,0,r6
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index bc4d50d..3c791e1 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -151,16 +151,14 @@
 #ifdef CONFIG_PPC_BOOK3S_64
 	if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
 		kvmppc_mmu_book3s_64_init(vcpu);
-		if (!to_book3s(vcpu)->hior_sregs)
-			to_book3s(vcpu)->hior = 0xfff00000;
+		to_book3s(vcpu)->hior = 0xfff00000;
 		to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
 		vcpu->arch.cpu_type = KVM_CPU_3S_64;
 	} else
 #endif
 	{
 		kvmppc_mmu_book3s_32_init(vcpu);
-		if (!to_book3s(vcpu)->hior_sregs)
-			to_book3s(vcpu)->hior = 0;
+		to_book3s(vcpu)->hior = 0;
 		to_book3s(vcpu)->msr_mask = 0xffffffffULL;
 		vcpu->arch.cpu_type = KVM_CPU_3S_32;
 	}
@@ -797,9 +795,6 @@
 		}
 	}
 
-	if (sregs->u.s.flags & KVM_SREGS_S_HIOR)
-		sregs->u.s.hior = to_book3s(vcpu)->hior;
-
 	return 0;
 }
 
@@ -836,11 +831,6 @@
 	/* Flush the MMU after messing with the segments */
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
 
-	if (sregs->u.s.flags & KVM_SREGS_S_HIOR) {
-		to_book3s(vcpu)->hior_sregs = true;
-		to_book3s(vcpu)->hior = sregs->u.s.hior;
-	}
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index efbf9ad..607fbdf 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -208,7 +208,6 @@
 	case KVM_CAP_PPC_BOOKE_SREGS:
 #else
 	case KVM_CAP_PPC_SEGSTATE:
-	case KVM_CAP_PPC_HIOR:
 	case KVM_CAP_PPC_PAPR:
 #endif
 	case KVM_CAP_PPC_UNSET_IRQ:
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 0d08d01..7a8a748 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <asm/cputable.h>
 #include <asm/code-patching.h>
+#include <asm/page.h>
+#include <asm/sections.h>
 
 
 struct fixup_entry {
@@ -128,6 +130,27 @@
 	}
 }
 
+void do_final_fixups(void)
+{
+#if defined(CONFIG_PPC64) && defined(CONFIG_RELOCATABLE)
+	int *src, *dest;
+	unsigned long length;
+
+	if (PHYSICAL_START == 0)
+		return;
+
+	src = (int *)(KERNELBASE + PHYSICAL_START);
+	dest = (int *)KERNELBASE;
+	length = (__end_interrupts - _stext) / sizeof(int);
+
+	while (length--) {
+		patch_instruction(dest, *src);
+		src++;
+		dest++;
+	}
+#endif
+}
+
 #ifdef CONFIG_FTR_FIXUP_SELFTEST
 
 #define check(x)	\
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 16da595..2dd6bdd 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -34,6 +34,7 @@
 #include <linux/suspend.h>
 #include <linux/memblock.h>
 #include <linux/hugetlb.h>
+#include <linux/slab.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -555,3 +556,32 @@
 		book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
 #endif
 }
+
+/*
+ * System memory should not be in /proc/iomem but various tools expect it
+ * (eg kdump).
+ */
+static int add_system_ram_resources(void)
+{
+	struct memblock_region *reg;
+
+	for_each_memblock(memory, reg) {
+		struct resource *res;
+		unsigned long base = reg->base;
+		unsigned long size = reg->size;
+
+		res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+		WARN_ON(!res);
+
+		if (res) {
+			res->name = "System RAM";
+			res->start = base;
+			res->end = base + size - 1;
+			res->flags = IORESOURCE_MEM;
+			WARN_ON(request_resource(&iomem_resource, res) < 0);
+		}
+	}
+
+	return 0;
+}
+subsys_initcall(add_system_ram_resources);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index c7dd4de..b22a83a 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -315,7 +315,10 @@
 	struct device_node *root;
 	const char *vec5;
 
-	root = of_find_node_by_path("/rtas");
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		root = of_find_node_by_path("/ibm,opal");
+	else
+		root = of_find_node_by_path("/rtas");
 	if (!root)
 		root = of_find_node_by_path("/");
 
@@ -344,12 +347,19 @@
 
 #define VEC5_AFFINITY_BYTE	5
 #define VEC5_AFFINITY		0x80
-	chosen = of_find_node_by_path("/chosen");
-	if (chosen) {
-		vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
-		if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
-			dbg("Using form 1 affinity\n");
-			form1_affinity = 1;
+
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		form1_affinity = 1;
+	else {
+		chosen = of_find_node_by_path("/chosen");
+		if (chosen) {
+			vec5 = of_get_property(chosen,
+					       "ibm,architecture-vec-5", NULL);
+			if (vec5 && (vec5[VEC5_AFFINITY_BYTE] &
+							VEC5_AFFINITY)) {
+				dbg("Using form 1 affinity\n");
+				form1_affinity = 1;
+			}
 		}
 	}
 
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..846b789 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anon,charon",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index e458872..3fe6d92 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -347,7 +347,7 @@
 
 config MCU_MPC8349EMITX
 	bool "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
+	depends on I2C=y && PPC_83xx
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c
index 232fc38..852592b 100644
--- a/arch/powerpc/platforms/cell/beat.c
+++ b/arch/powerpc/platforms/cell/beat.c
@@ -230,7 +230,7 @@
 		}
 		ev->virq = virq;
 
-		rc = request_irq(virq, ev->handler, IRQF_DISABLED,
+		rc = request_irq(virq, ev->handler, 0,
 				      ev->typecode, NULL);
 		if (rc != 0) {
 			printk(KERN_ERR "Beat: failed to request virtual IRQ"
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index ae790ac..14be2bd 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -514,7 +514,7 @@
 	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 				     oirq.size);
 	if (request_irq(virq, pciex_handle_internal_irq,
-			IRQF_DISABLED, "pciex", (void *)phb)) {
+			0, "pciex", (void *)phb)) {
 		pr_err("PCIEXC:Failed to request irq\n");
 		goto error;
 	}
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index fc46fca..592c3d5 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -412,8 +412,7 @@
 			IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
 	BUG_ON(virq == NO_IRQ);
 
-	ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED,
-			iommu->name, iommu);
+	ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
 	BUG_ON(ret);
 
 	/* set the IOC segment table origin register (and turn on the iommu) */
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index 1acf360..59c1a16 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -392,7 +392,7 @@
 		}
 
 		rc = request_irq(irq, cbe_pm_irq,
-				 IRQF_DISABLED, "cbe-pmu-0", NULL);
+				 0, "cbe-pmu-0", NULL);
 		if (rc) {
 			printk("ERROR: Request for irq on node %d failed\n",
 			       node);
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 3675da7..e94d3ec 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -442,8 +442,7 @@
 		snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
 			 spu->number);
 		ret = request_irq(spu->irqs[0], spu_irq_class_0,
-				  IRQF_DISABLED,
-				  spu->irq_c0, spu);
+				  0, spu->irq_c0, spu);
 		if (ret)
 			goto bail0;
 	}
@@ -451,8 +450,7 @@
 		snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
 			 spu->number);
 		ret = request_irq(spu->irqs[1], spu_irq_class_1,
-				  IRQF_DISABLED,
-				  spu->irq_c1, spu);
+				  0, spu->irq_c1, spu);
 		if (ret)
 			goto bail1;
 	}
@@ -460,8 +458,7 @@
 		snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
 			 spu->number);
 		ret = request_irq(spu->irqs[2], spu_irq_class_2,
-				  IRQF_DISABLED,
-				  spu->irq_c2, spu);
+				  0, spu->irq_c2, spu);
 		if (ret)
 			goto bail2;
 	}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index cb40e92..901bfbd 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -272,7 +272,6 @@
 
 static struct irqaction gatwick_cascade_action = {
 	.handler	= gatwick_action,
-	.flags		= IRQF_DISABLED,
 	.name		= "cascade",
 };
 
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9a521dc..9b6a820 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@
 
 	if (psurge_secondary_virq)
 		rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
-			IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+			IRQF_PERCPU, "IPI", NULL);
 
 	if (rc)
 		pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,7 +408,7 @@
 
 static struct irqaction psurge_irqaction = {
 	.handler = psurge_ipi_intr,
-	.flags = IRQF_DISABLED|IRQF_PERCPU,
+	.flags = IRQF_PERCPU,
 	.name = "primary IPI",
 };
 
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 6c4b583..3f175e8 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -825,7 +825,7 @@
 
 	spin_lock_init(&dev.lock);
 
-	res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED,
+	res = request_irq(irq, ps3_notification_interrupt, 0,
 			  "ps3_notification", &dev);
 	if (res) {
 		pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 404bc52..1d6f4f4 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -88,6 +88,7 @@
 	struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
 	u64 ppe_id;
 	u64 thread_id;
+	unsigned long ipi_mask;
 };
 
 static DEFINE_PER_CPU(struct ps3_private, ps3_private);
@@ -144,7 +145,11 @@
 static void ps3_chip_eoi(struct irq_data *d)
 {
 	const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
-	lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
+
+	/* non-IPIs are EOIed here. */
+
+	if (!test_bit(63 - d->irq, &pd->ipi_mask))
+		lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
 }
 
 /**
@@ -691,6 +696,16 @@
 		cpu, virq, pd->bmp.ipi_debug_brk_mask);
 }
 
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
+{
+	struct ps3_private *pd = &per_cpu(ps3_private, cpu);
+
+	set_bit(63 - virq, &pd->ipi_mask);
+
+	DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
+		cpu, virq, pd->ipi_mask);
+}
+
 static unsigned int ps3_get_irq(void)
 {
 	struct ps3_private *pd = &__get_cpu_var(ps3_private);
@@ -720,6 +735,12 @@
 		BUG();
 	}
 #endif
+
+	/* IPIs are EOIed here. */
+
+	if (test_bit(63 - plug, &pd->ipi_mask))
+		lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
+
 	return plug;
 }
 
diff --git a/arch/powerpc/platforms/ps3/platform.h b/arch/powerpc/platforms/ps3/platform.h
index 9a196a8..1a633ed 100644
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -43,6 +43,7 @@
 void ps3_init_IRQ(void);
 void ps3_shutdown_IRQ(int cpu);
 void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq);
+void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq);
 
 /* smp */
 
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index 5e304c2..ca40f6a 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -184,7 +184,7 @@
 	enum ps3_bus_type *bus_type)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -199,7 +199,7 @@
 	unsigned int *num_dev)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -239,7 +239,7 @@
 	unsigned int dev_index, enum ps3_dev_type *dev_type)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -256,8 +256,8 @@
 	enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id)
 {
 	int result;
-	u64 v1;
-	u64 v2;
+	u64 v1 = 0;
+	u64 v2 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -275,7 +275,7 @@
 	enum ps3_reg_type *reg_type)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -615,7 +615,7 @@
 	unsigned int dev_index, unsigned int *num_regions)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("bus", bus_index),
@@ -631,7 +631,7 @@
 	unsigned int *region_id)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 	    make_first_field("bus", bus_index),
@@ -786,7 +786,7 @@
 int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -805,7 +805,7 @@
 int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -827,8 +827,8 @@
 	enum ps3_spu_resource_type *resource_type, unsigned int *resource_id)
 {
 	int result;
-	u64 v1;
-	u64 v2;
+	u64 v1 = 0;
+	u64 v2 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -854,7 +854,7 @@
 int ps3_repository_read_boot_dat_size(unsigned int *size)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -869,7 +869,7 @@
 int ps3_repository_read_vuart_av_port(unsigned int *port)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -884,7 +884,7 @@
 int ps3_repository_read_vuart_sysmgr_port(unsigned int *port)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_CURRENT,
 		make_first_field("bi", 0),
@@ -919,7 +919,7 @@
 int ps3_repository_read_num_be(unsigned int *num_be)
 {
 	int result;
-	u64 v1;
+	u64 v1 = 0;
 
 	result = read_node(PS3_LPAR_ID_PME,
 		make_first_field("ben", 0),
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index 4c44794..efc1cd8 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -59,46 +59,49 @@
 
 static int ps3_smp_probe(void)
 {
-	return 2;
-}
+	int cpu;
 
-static void __init ps3_smp_setup_cpu(int cpu)
-{
-	int result;
-	unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
-	int i;
+	for (cpu = 0; cpu < 2; cpu++) {
+		int result;
+		unsigned int *virqs = per_cpu(ps3_ipi_virqs, cpu);
+		int i;
 
-	DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
+		DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
 
-	/*
-	 * Check assumptions on ps3_ipi_virqs[] indexing. If this
-	 * check fails, then a different mapping of PPC_MSG_
-	 * to index needs to be setup.
-	 */
+		/*
+		* Check assumptions on ps3_ipi_virqs[] indexing. If this
+		* check fails, then a different mapping of PPC_MSG_
+		* to index needs to be setup.
+		*/
 
-	BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION    != 0);
-	BUILD_BUG_ON(PPC_MSG_RESCHEDULE       != 1);
-	BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
-	BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK   != 3);
+		BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION    != 0);
+		BUILD_BUG_ON(PPC_MSG_RESCHEDULE       != 1);
+		BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+		BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK   != 3);
 
-	for (i = 0; i < MSG_COUNT; i++) {
-		result = ps3_event_receive_port_setup(cpu, &virqs[i]);
+		for (i = 0; i < MSG_COUNT; i++) {
+			result = ps3_event_receive_port_setup(cpu, &virqs[i]);
 
-		if (result)
-			continue;
+			if (result)
+				continue;
 
-		DBG("%s:%d: (%d, %d) => virq %u\n",
-			__func__, __LINE__, cpu, i, virqs[i]);
+			DBG("%s:%d: (%d, %d) => virq %u\n",
+				__func__, __LINE__, cpu, i, virqs[i]);
 
-		result = smp_request_message_ipi(virqs[i], i);
+			result = smp_request_message_ipi(virqs[i], i);
 
-		if (result)
-			virqs[i] = NO_IRQ;
+			if (result)
+				virqs[i] = NO_IRQ;
+			else
+				ps3_register_ipi_irq(cpu, virqs[i]);
+		}
+
+		ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
+
+		DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
 	}
 
-	ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
-
-	DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
+	return 2;
 }
 
 void ps3_smp_cleanup_cpu(int cpu)
@@ -121,7 +124,6 @@
 	.probe		= ps3_smp_probe,
 	.message_pass	= ps3_smp_message_pass,
 	.kick_cpu	= smp_generic_kick_cpu,
-	.setup_cpu	= ps3_smp_setup_cpu,
 };
 
 void smp_init_ps3(void)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index de170fd..22ffccd 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -23,7 +23,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/export.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 0842c6f..8c7e852 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -800,8 +800,6 @@
 	 * IPIs are marked IRQ_PER_CPU. This has the side effect of
 	 * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
 	 * applying to them. We EOI them late to avoid re-entering.
-	 * We mark IPI's with IRQF_DISABLED as they must run with
-	 * irqs disabled.
 	 */
 	mpic_eoi(mpic);
 }
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index d3d6ce3..0debcc3 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -115,7 +115,7 @@
 	}
 
 	/* Install error handler */
-	if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+	if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
 		printk(KERN_ERR "Cannot install L2C error handler"
 		       ", cache is not enabled\n");
 		of_node_put(np);
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 3d93a8d..63762c6 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -134,11 +134,10 @@
 	BUG_ON(ipi == NO_IRQ);
 
 	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled, and PERCPU.  The handler was set in map.
+	 * IPIs are marked IRQF_PERCPU. The handler was set in map.
 	 */
 	BUG_ON(request_irq(ipi, icp_ops->ipi_action,
-			   IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL));
+			   IRQF_PERCPU, "IPI", NULL));
 }
 
 int __init xics_smp_probe(void)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a9fbd43..373679b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -572,6 +572,7 @@
 config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on 64BIT
+	select KEXEC
 	help
 	  Generate crash dump after being started by kexec.
 	  Crash dump kernels are loaded in the main kernel with kexec-tools
diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h
index 4967677..ffd1ac2 100644
--- a/arch/s390/crypto/crypt_s390.h
+++ b/arch/s390/crypto/crypt_s390.h
@@ -368,9 +368,12 @@
 
 	if (facility_mask & CRYPT_S390_MSA && !test_facility(17))
 		return 0;
-	if (facility_mask & CRYPT_S390_MSA3 && !test_facility(76))
+
+	if (facility_mask & CRYPT_S390_MSA3 &&
+	    (!test_facility(2) || !test_facility(76)))
 		return 0;
-	if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
+	if (facility_mask & CRYPT_S390_MSA4 &&
+	    (!test_facility(2) || !test_facility(77)))
 		return 0;
 
 	switch (func & CRYPT_S390_OP_MASK) {
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 24e1847..b0c235c 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -47,7 +47,7 @@
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
-#define CPUSTAT_HOST       0x80000000
+#define CPUSTAT_STOPPED    0x80000000
 #define CPUSTAT_WAIT       0x10000000
 #define CPUSTAT_ECALL_PEND 0x08000000
 #define CPUSTAT_STOP_INT   0x04000000
@@ -139,6 +139,7 @@
 	u32 instruction_stfl;
 	u32 instruction_tprot;
 	u32 instruction_sigp_sense;
+	u32 instruction_sigp_sense_running;
 	u32 instruction_sigp_external_call;
 	u32 instruction_sigp_emergency;
 	u32 instruction_sigp_stop;
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 34ede0e..524d23b 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -593,6 +593,8 @@
 	unsigned long address, bits;
 	unsigned char skey;
 
+	if (!pte_present(*ptep))
+		return pgste;
 	address = pte_val(*ptep) & PAGE_MASK;
 	skey = page_get_storage_key(address);
 	bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
@@ -625,6 +627,8 @@
 #ifdef CONFIG_PGSTE
 	int young;
 
+	if (!pte_present(*ptep))
+		return pgste;
 	young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
 	/* Transfer page referenced bit to pte software bit (host view) */
 	if (young || (pgste_val(pgste) & RCP_HR_BIT))
@@ -638,13 +642,15 @@
 
 }
 
-static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
+static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
 {
 #ifdef CONFIG_PGSTE
 	unsigned long address;
 	unsigned long okey, nkey;
 
-	address = pte_val(*ptep) & PAGE_MASK;
+	if (!pte_present(entry))
+		return;
+	address = pte_val(entry) & PAGE_MASK;
 	okey = nkey = page_get_storage_key(address);
 	nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT);
 	/* Set page access key and fetch protection bit from pgste */
@@ -712,7 +718,7 @@
 
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
-		pgste_set_pte(ptep, pgste);
+		pgste_set_pte(ptep, pgste, entry);
 		*ptep = entry;
 		pgste_set_unlock(ptep, pgste);
 	} else
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 5a09971..097183c 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -82,6 +82,7 @@
 #define MACHINE_FLAG_LPAR	(1UL << 12)
 #define MACHINE_FLAG_SPP	(1UL << 13)
 #define MACHINE_FLAG_TOPOLOGY	(1UL << 14)
+#define MACHINE_FLAG_STCKF	(1UL << 15)
 
 #define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
 #define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
@@ -100,6 +101,7 @@
 #define MACHINE_HAS_PFMF	(0)
 #define MACHINE_HAS_SPP		(0)
 #define MACHINE_HAS_TOPOLOGY	(0)
+#define MACHINE_HAS_STCKF	(0)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
@@ -111,6 +113,7 @@
 #define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
 #define MACHINE_HAS_SPP		(S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
 #define MACHINE_HAS_TOPOLOGY	(S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
+#define MACHINE_HAS_STCKF	(S390_lowcore.machine_flags & MACHINE_FLAG_STCKF)
 #endif /* __s390x__ */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index d610bef..c447a27 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -90,7 +90,7 @@
 {
 	unsigned long long clk;
 
-	if (test_facility(25))
+	if (MACHINE_HAS_STCKF)
 		asm volatile(".insn	s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
 	else
 		clk = get_clock();
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 404bdb96..58de4c9 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -277,7 +277,9 @@
 #define __NR_clock_adjtime	337
 #define __NR_syncfs		338
 #define __NR_setns		339
-#define NR_syscalls 340
+#define __NR_process_vm_readv	340
+#define __NR_process_vm_writev	341
+#define NR_syscalls 342
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 5006a1d..18c51df 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1627,3 +1627,23 @@
 	lgfr	%r2,%r2			# int
 	lgfr	%r3,%r3			# int
 	jg	sys_setns
+
+ENTRY(compat_sys_process_vm_readv_wrapper)
+	lgfr	%r2,%r2			# compat_pid_t
+	llgtr	%r3,%r3			# struct compat_iovec __user *
+	llgfr	%r4,%r4			# unsigned long
+	llgtr	%r5,%r5			# struct compat_iovec __user *
+	llgfr	%r6,%r6			# unsigned long
+	llgf	%r0,164(%r15)		# unsigned long
+	stg	%r0,160(%r15)
+	jg	sys_process_vm_readv
+
+ENTRY(compat_sys_process_vm_writev_wrapper)
+	lgfr	%r2,%r2			# compat_pid_t
+	llgtr	%r3,%r3			# struct compat_iovec __user *
+	llgfr	%r4,%r4			# unsigned long
+	llgtr	%r5,%r5			# struct compat_iovec __user *
+	llgfr	%r6,%r6			# unsigned long
+	llgf	%r0,164(%r15)		# unsigned long
+	stg	%r0,160(%r15)
+	jg	sys_process_vm_writev
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 37394b3..c9ffe00 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -390,6 +390,8 @@
 		S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
 	if (test_facility(40))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
+	if (test_facility(25))
+		S390_lowcore.machine_flags |= MACHINE_FLAG_STCKF;
 #endif
 }
 
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 8ac6bfa..e58a462 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -211,6 +211,8 @@
 
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
 		return;
+	if (OLDMEM_BASE)
+		return;
 	if (console_devno != -1)
 		sprintf(str, " cio_ignore=all,!0.0.%04x,!0.0.%04x",
 			ipl_info.data.fcp.dev_id.devno, console_devno);
@@ -482,7 +484,7 @@
 
 
 #ifdef CONFIG_ZFCPDUMP
-	if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
+	if (ipl_info.type == IPL_TYPE_FCP_DUMP && !OLDMEM_BASE) {
 		memory_end = ZFCPDUMP_HSA_SIZE;
 		memory_end_set = 1;
 	}
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 73eb08c..bcab2f0 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -348,3 +348,5 @@
 SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper)
 SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper)
 SYSCALL(sys_setns,sys_setns,sys_setns_wrapper)
+SYSCALL(sys_process_vm_readv,sys_process_vm_readv,compat_sys_process_vm_readv_wrapper) /* 340 */
+SYSCALL(sys_process_vm_writev,sys_process_vm_writev,compat_sys_process_vm_writev_wrapper)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 77b8942..fdb5b8c 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -68,8 +68,10 @@
 	return mask;
 }
 
-static void add_cpus_to_mask(struct topology_cpu *tl_cpu,
-			     struct mask_info *book, struct mask_info *core)
+static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
+					  struct mask_info *book,
+					  struct mask_info *core,
+					  int z10)
 {
 	unsigned int cpu;
 
@@ -88,10 +90,16 @@
 			cpu_book_id[lcpu] = book->id;
 #endif
 			cpumask_set_cpu(lcpu, &core->mask);
-			cpu_core_id[lcpu] = core->id;
+			if (z10) {
+				cpu_core_id[lcpu] = rcpu;
+				core = core->next;
+			} else {
+				cpu_core_id[lcpu] = core->id;
+			}
 			smp_cpu_polarization[lcpu] = tl_cpu->pp;
 		}
 	}
+	return core;
 }
 
 static void clear_masks(void)
@@ -123,18 +131,41 @@
 {
 #ifdef CONFIG_SCHED_BOOK
 	struct mask_info *book = &book_info;
+	struct cpuid cpu_id;
 #else
 	struct mask_info *book = NULL;
 #endif
 	struct mask_info *core = &core_info;
 	union topology_entry *tle, *end;
+	int z10 = 0;
 
-
+#ifdef CONFIG_SCHED_BOOK
+	get_cpu_id(&cpu_id);
+	z10 = cpu_id.machine == 0x2097 || cpu_id.machine == 0x2098;
+#endif
 	spin_lock_irq(&topology_lock);
 	clear_masks();
 	tle = info->tle;
 	end = (union topology_entry *)((unsigned long)info + info->length);
 	while (tle < end) {
+#ifdef CONFIG_SCHED_BOOK
+		if (z10) {
+			switch (tle->nl) {
+			case 1:
+				book = book->next;
+				book->id = tle->container.id;
+				break;
+			case 0:
+				core = add_cpus_to_mask(&tle->cpu, book, core, z10);
+				break;
+			default:
+				clear_masks();
+				goto out;
+			}
+			tle = next_tle(tle);
+			continue;
+		}
+#endif
 		switch (tle->nl) {
 #ifdef CONFIG_SCHED_BOOK
 		case 2:
@@ -147,7 +178,7 @@
 			core->id = tle->container.id;
 			break;
 		case 0:
-			add_cpus_to_mask(&tle->cpu, book, core);
+			add_cpus_to_mask(&tle->cpu, book, core, z10);
 			break;
 		default:
 			clear_masks();
@@ -328,8 +359,8 @@
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		printk(" %d", info->mag[i]);
 	printk(" / %d\n", info->mnest);
-	alloc_masks(info, &core_info, 2);
+	alloc_masks(info, &core_info, 1);
 #ifdef CONFIG_SCHED_BOOK
-	alloc_masks(info, &book_info, 3);
+	alloc_masks(info, &book_info, 2);
 #endif
 }
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 56fe6bc..e4c79eb 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -43,6 +43,8 @@
 
 	NOTES :text :note
 
+	.dummy : { *(.dummy) } :data
+
 	RODATA
 
 #ifdef CONFIG_SHARED_KERNEL
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 87cedd6..8943e82 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -70,7 +70,7 @@
 		return -EOPNOTSUPP;
 	}
 
-	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM;
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL;
 	vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index c7c5189..0243454 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -132,7 +132,6 @@
 	int rc = 0;
 
 	vcpu->stat.exit_stop_request++;
-	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	spin_lock_bh(&vcpu->arch.local_int.lock);
 	if (vcpu->arch.local_int.action_bits & ACTION_STORE_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STORE_ON_STOP;
@@ -149,6 +148,8 @@
 	}
 
 	if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
+		atomic_set_mask(CPUSTAT_STOPPED,
+				&vcpu->arch.sie_block->cpuflags);
 		vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
 		VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
 		rc = -EOPNOTSUPP;
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 87c1670..278ee00 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -252,6 +252,7 @@
 			offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
 		if (rc == -EFAULT)
 			exception = 1;
+		atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 		break;
 
 	case KVM_S390_PROGRAM_INT:
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0bd3bea..d1c44573 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -65,6 +65,7 @@
 	{ "instruction_stfl", VCPU_STAT(instruction_stfl) },
 	{ "instruction_tprot", VCPU_STAT(instruction_tprot) },
 	{ "instruction_sigp_sense", VCPU_STAT(instruction_sigp_sense) },
+	{ "instruction_sigp_sense_running", VCPU_STAT(instruction_sigp_sense_running) },
 	{ "instruction_sigp_external_call", VCPU_STAT(instruction_sigp_external_call) },
 	{ "instruction_sigp_emergency", VCPU_STAT(instruction_sigp_emergency) },
 	{ "instruction_sigp_stop", VCPU_STAT(instruction_sigp_stop) },
@@ -127,6 +128,7 @@
 	switch (ext) {
 	case KVM_CAP_S390_PSW:
 	case KVM_CAP_S390_GMAP:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
 	default:
@@ -270,10 +272,12 @@
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
 	gmap_enable(vcpu->arch.gmap);
+	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	gmap_disable(vcpu->arch.gmap);
 	save_fp_regs(&vcpu->arch.guest_fpregs);
 	save_access_regs(vcpu->arch.guest_acrs);
@@ -301,7 +305,9 @@
 
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
-	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM);
+	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH |
+						    CPUSTAT_SM |
+						    CPUSTAT_STOPPED);
 	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
@@ -428,7 +434,7 @@
 {
 	int rc = 0;
 
-	if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
+	if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED))
 		rc = -EBUSY;
 	else {
 		vcpu->run->psw_mask = psw.mask;
@@ -501,7 +507,7 @@
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
 
-	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags);
 
 	BUG_ON(vcpu->kvm->arch.float_int.local_int[vcpu->vcpu_id] == NULL);
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 3916263..d026389 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -336,6 +336,7 @@
 	u64 address1 = disp1 + base1 ? vcpu->arch.guest_gprs[base1] : 0;
 	u64 address2 = disp2 + base2 ? vcpu->arch.guest_gprs[base2] : 0;
 	struct vm_area_struct *vma;
+	unsigned long user_address;
 
 	vcpu->stat.instruction_tprot++;
 
@@ -349,9 +350,14 @@
 		return -EOPNOTSUPP;
 
 
+	/* we must resolve the address without holding the mmap semaphore.
+	 * This is ok since the userspace hypervisor is not supposed to change
+	 * the mapping while the guest queries the memory. Otherwise the guest
+	 * might crash or get wrong info anyway. */
+	user_address = (unsigned long) __guestaddr_to_user(vcpu, address1);
+
 	down_read(&current->mm->mmap_sem);
-	vma = find_vma(current->mm,
-			(unsigned long) __guestaddr_to_user(vcpu, address1));
+	vma = find_vma(current->mm, user_address);
 	if (!vma) {
 		up_read(&current->mm->mmap_sem);
 		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index f815118..0a7941d 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -31,9 +31,11 @@
 #define SIGP_SET_PREFIX        0x0d
 #define SIGP_STORE_STATUS_ADDR 0x0e
 #define SIGP_SET_ARCH          0x12
+#define SIGP_SENSE_RUNNING     0x15
 
 /* cpu status bits */
 #define SIGP_STAT_EQUIPMENT_CHECK   0x80000000UL
+#define SIGP_STAT_NOT_RUNNING	    0x00000400UL
 #define SIGP_STAT_INCORRECT_STATE   0x00000200UL
 #define SIGP_STAT_INVALID_PARAMETER 0x00000100UL
 #define SIGP_STAT_EXT_CALL_PENDING  0x00000080UL
@@ -57,8 +59,8 @@
 	spin_lock(&fi->lock);
 	if (fi->local_int[cpu_addr] == NULL)
 		rc = 3; /* not operational */
-	else if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
-		 & CPUSTAT_RUNNING) {
+	else if (!(atomic_read(fi->local_int[cpu_addr]->cpuflags)
+		  & CPUSTAT_STOPPED)) {
 		*reg &= 0xffffffff00000000UL;
 		rc = 1; /* status stored */
 	} else {
@@ -251,7 +253,7 @@
 
 	spin_lock_bh(&li->lock);
 	/* cpu must be in stopped state */
-	if (atomic_read(li->cpuflags) & CPUSTAT_RUNNING) {
+	if (!(atomic_read(li->cpuflags) & CPUSTAT_STOPPED)) {
 		rc = 1; /* incorrect state */
 		*reg &= SIGP_STAT_INCORRECT_STATE;
 		kfree(inti);
@@ -275,6 +277,38 @@
 	return rc;
 }
 
+static int __sigp_sense_running(struct kvm_vcpu *vcpu, u16 cpu_addr,
+				unsigned long *reg)
+{
+	int rc;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+
+	if (cpu_addr >= KVM_MAX_VCPUS)
+		return 3; /* not operational */
+
+	spin_lock(&fi->lock);
+	if (fi->local_int[cpu_addr] == NULL)
+		rc = 3; /* not operational */
+	else {
+		if (atomic_read(fi->local_int[cpu_addr]->cpuflags)
+		    & CPUSTAT_RUNNING) {
+			/* running */
+			rc = 1;
+		} else {
+			/* not running */
+			*reg &= 0xffffffff00000000UL;
+			*reg |= SIGP_STAT_NOT_RUNNING;
+			rc = 0;
+		}
+	}
+	spin_unlock(&fi->lock);
+
+	VCPU_EVENT(vcpu, 4, "sensed running status of cpu %x rc %x", cpu_addr,
+		   rc);
+
+	return rc;
+}
+
 int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 {
 	int r1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
@@ -331,6 +365,11 @@
 		rc = __sigp_set_prefix(vcpu, cpu_addr, parameter,
 				       &vcpu->arch.guest_gprs[r1]);
 		break;
+	case SIGP_SENSE_RUNNING:
+		vcpu->stat.instruction_sigp_sense_running++;
+		rc = __sigp_sense_running(vcpu, cpu_addr,
+					  &vcpu->arch.guest_gprs[r1]);
+		break;
 	case SIGP_RESTART:
 		vcpu->stat.instruction_sigp_restart++;
 		/* user space must know about restart */
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 1766def..a9a3018 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -587,8 +587,13 @@
 		} else {
 			/* Completion interrupt was faster than initial
 			 * interrupt. Set pfault_wait to -1 so the initial
-			 * interrupt doesn't put the task to sleep. */
-			tsk->thread.pfault_wait = -1;
+			 * interrupt doesn't put the task to sleep.
+			 * If the task is not running, ignore the completion
+			 * interrupt since it must be a leftover of a PFAULT
+			 * CANCEL operation which didn't remove all pending
+			 * completion interrupts. */
+			if (tsk->state == TASK_RUNNING)
+				tsk->thread.pfault_wait = -1;
 		}
 		put_task_struct(tsk);
 	} else {
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 0dca9a5..15d9703 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -151,8 +151,13 @@
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_UNCACHED_MAPPING
+#if defined(CONFIG_29BIT)
+#define UNCAC_ADDR(addr)	P2SEGADDR(addr)
+#define CAC_ADDR(addr)		P1SEGADDR(addr)
+#else
 #define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + uncached_start)
 #define CAC_ADDR(addr)		((addr) - uncached_start + PAGE_OFFSET)
+#endif
 #else
 #define UNCAC_ADDR(addr)	((addr))
 #define CAC_ADDR(addr)		((addr))
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 3432008..152b862 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -375,8 +375,10 @@
 #define __NR_syncfs		362
 #define __NR_sendmmsg		363
 #define __NR_setns		364
+#define __NR_process_vm_readv	365
+#define __NR_process_vm_writev	366
 
-#define NR_syscalls 365
+#define NR_syscalls 367
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index ec98986..c330c23 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -396,10 +396,12 @@
 #define __NR_syncfs		373
 #define __NR_sendmmsg		374
 #define __NR_setns		375
+#define __NR_process_vm_readv	376
+#define __NR_process_vm_writev	377
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 376
+#define NR_syscalls 378
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index a43124e..0bd744f 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -176,10 +176,12 @@
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xfffe8000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 192, 192, 192, 192 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif0_device = {
@@ -193,10 +195,12 @@
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xfffe8800,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 196, 196, 196, 196 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif1_device = {
@@ -210,10 +214,12 @@
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xfffe9000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 200, 200, 200, 200 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif2_device = {
@@ -227,10 +233,12 @@
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xfffe9800,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
+			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		=  { 204, 204, 204, 204 },
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif3_device = {
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 293e39c..ee56a9b 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -382,3 +382,5 @@
 	.long sys_syncfs
 	.long sys_sendmmsg
 	.long sys_setns
+	.long sys_process_vm_readv	/* 365 */
+	.long sys_process_vm_writev
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index ceb34b9..9af7de2 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -402,3 +402,5 @@
 	.long sys_syncfs
 	.long sys_sendmmsg
 	.long sys_setns			/* 375 */
+	.long sys_process_vm_readv
+	.long sys_process_vm_writev
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index 5b31a8e..a790cc6 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -431,10 +431,6 @@
 #define kern_addr_valid(addr) \
 	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
 
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
-			      unsigned long from, unsigned long pfn,
-			      unsigned long size, pgprot_t prot);
-
 /*
  * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
  * its high 4 bits.  These macros/functions put it there or get it from there.
@@ -443,6 +439,22 @@
 #define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
 #define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
 
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+			   unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+				     unsigned long from, unsigned long pfn,
+				     unsigned long size, pgprot_t prot)
+{
+	unsigned long long offset, space, phys_base;
+
+	offset = ((unsigned long long) GET_PFN(pfn)) << PAGE_SHIFT;
+	space = GET_IOSPACE(pfn);
+	phys_base = offset | (space << 32ULL);
+
+	return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 #define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
 ({									  \
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index adf8932..38ebb2c 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -757,10 +757,6 @@
 
 extern int page_in_phys_avail(unsigned long paddr);
 
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-			       unsigned long pfn,
-			       unsigned long size, pgprot_t prot);
-
 /*
  * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
  * its high 4 bits.  These macros/functions put it there or get it from there.
@@ -769,6 +765,22 @@
 #define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
 #define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
 
+extern int remap_pfn_range(struct vm_area_struct *, unsigned long, unsigned long,
+			   unsigned long, pgprot_t);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+				     unsigned long from, unsigned long pfn,
+				     unsigned long size, pgprot_t prot)
+{
+	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
+	int space = GET_IOSPACE(pfn);
+	unsigned long phys_base;
+
+	phys_base = offset | (((unsigned long) space) << 32UL);
+
+	return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
+}
+
 #include <asm-generic/pgtable.h>
 
 /* We provide our own get_unmapped_area to cope with VA holes and
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 6260d5d..c7cb0af 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -406,8 +406,10 @@
 #define __NR_syncfs		335
 #define __NR_sendmmsg		336
 #define __NR_setns		337
+#define __NR_process_vm_readv	338
+#define __NR_process_vm_writev	339
 
-#define NR_syscalls		338
+#define NR_syscalls		340
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/entry.h b/arch/sparc/kernel/entry.h
index e27f8ea..0c218e4 100644
--- a/arch/sparc/kernel/entry.h
+++ b/arch/sparc/kernel/entry.h
@@ -42,6 +42,9 @@
 extern void fpload(unsigned long *fpregs, unsigned long *fsr);
 
 #else /* CONFIG_SPARC32 */
+
+#include <asm/trap_block.h>
+
 struct popc_3insn_patch_entry {
 	unsigned int	addr;
 	unsigned int	insns[3];
@@ -57,6 +60,10 @@
 	__popc_6insn_patch_end;
 
 extern void __init per_cpu_patch(void);
+extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
+				    struct sun4v_1insn_patch_entry *);
+extern void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *,
+				    struct sun4v_2insn_patch_entry *);
 extern void __init sun4v_patch(void);
 extern void __init boot_cpu_id_too_large(int cpu);
 extern unsigned int dcache_parity_tl1_occurred;
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index da0c6c7..e551987 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -17,6 +17,8 @@
 #include <asm/processor.h>
 #include <asm/spitfire.h>
 
+#include "entry.h"
+
 #ifdef CONFIG_SPARC64
 
 #include <linux/jump_label.h>
@@ -203,6 +205,29 @@
 }
 
 #ifdef CONFIG_SPARC64
+static void do_patch_sections(const Elf_Ehdr *hdr,
+			      const Elf_Shdr *sechdrs)
+{
+	const Elf_Shdr *s, *sun4v_1insn = NULL, *sun4v_2insn = NULL;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
+		if (!strcmp(".sun4v_1insn_patch", secstrings + s->sh_name))
+			sun4v_1insn = s;
+		if (!strcmp(".sun4v_2insn_patch", secstrings + s->sh_name))
+			sun4v_2insn = s;
+	}
+
+	if (sun4v_1insn && tlb_type == hypervisor) {
+		void *p = (void *) sun4v_1insn->sh_addr;
+		sun4v_patch_1insn_range(p, p + sun4v_1insn->sh_size);
+	}
+	if (sun4v_2insn && tlb_type == hypervisor) {
+		void *p = (void *) sun4v_2insn->sh_addr;
+		sun4v_patch_2insn_range(p, p + sun4v_2insn->sh_size);
+	}
+}
+
 int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
@@ -210,6 +235,8 @@
 	/* make jump label nops */
 	jump_label_apply_nops(me);
 
+	do_patch_sections(hdr, sechdrs);
+
 	/* Cheetah's I-cache is fully coherent.  */
 	if (tlb_type == spitfire) {
 		unsigned long va;
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index c965595a..a854a1c 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -234,40 +234,50 @@
 	}
 }
 
+void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *start,
+			     struct sun4v_1insn_patch_entry *end)
+{
+	while (start < end) {
+		unsigned long addr = start->addr;
+
+		*(unsigned int *) (addr +  0) = start->insn;
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
+
+		start++;
+	}
+}
+
+void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *start,
+			     struct sun4v_2insn_patch_entry *end)
+{
+	while (start < end) {
+		unsigned long addr = start->addr;
+
+		*(unsigned int *) (addr +  0) = start->insns[0];
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
+
+		*(unsigned int *) (addr +  4) = start->insns[1];
+		wmb();
+		__asm__ __volatile__("flush	%0" : : "r" (addr +  4));
+
+		start++;
+	}
+}
+
 void __init sun4v_patch(void)
 {
 	extern void sun4v_hvapi_init(void);
-	struct sun4v_1insn_patch_entry *p1;
-	struct sun4v_2insn_patch_entry *p2;
 
 	if (tlb_type != hypervisor)
 		return;
 
-	p1 = &__sun4v_1insn_patch;
-	while (p1 < &__sun4v_1insn_patch_end) {
-		unsigned long addr = p1->addr;
+	sun4v_patch_1insn_range(&__sun4v_1insn_patch,
+				&__sun4v_1insn_patch_end);
 
-		*(unsigned int *) (addr +  0) = p1->insn;
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
-
-		p1++;
-	}
-
-	p2 = &__sun4v_2insn_patch;
-	while (p2 < &__sun4v_2insn_patch_end) {
-		unsigned long addr = p2->addr;
-
-		*(unsigned int *) (addr +  0) = p2->insns[0];
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  0));
-
-		*(unsigned int *) (addr +  4) = p2->insns[1];
-		wmb();
-		__asm__ __volatile__("flush	%0" : : "r" (addr +  4));
-
-		p2++;
-	}
+	sun4v_patch_2insn_range(&__sun4v_2insn_patch,
+				&__sun4v_2insn_patch_end);
 
 	sun4v_hvapi_init();
 }
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 2caa556..023b886 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -822,21 +822,23 @@
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-void do_signal32(sigset_t *oldset, struct pt_regs * regs,
-		 int restart_syscall, unsigned long orig_i0)
+void do_signal32(sigset_t *oldset, struct pt_regs * regs)
 {
 	struct k_sigaction ka;
+	unsigned long orig_i0;
+	int restart_syscall;
 	siginfo_t info;
 	int signr;
 	
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
-	/* If the debugger messes with the program counter, it clears
-	 * the "in syscall" bit, directing us to not perform a syscall
-	 * restart.
-	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
-		restart_syscall = 0;
+	restart_syscall = 0;
+	orig_i0 = 0;
+	if (pt_regs_is_syscall(regs) &&
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
 
 	if (signr > 0) {
 		if (restart_syscall)
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 8ce247a..d54c6e5 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -519,10 +519,26 @@
 	siginfo_t info;
 	int signr;
 
+	/* It's a lot of work and synchronization to add a new ptrace
+	 * register for GDB to save and restore in order to get
+	 * orig_i0 correct for syscall restarts when debugging.
+	 *
+	 * Although it should be the case that most of the global
+	 * registers are volatile across a system call, glibc already
+	 * depends upon that fact that we preserve them.  So we can't
+	 * just use any global register to save away the orig_i0 value.
+	 *
+	 * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+	 * preserved across a system call trap by various pieces of
+	 * code in glibc.
+	 *
+	 * %g7 is used as the "thread register".   %g6 is not used in
+	 * any fixed manner.  %g6 is used as a scratch register and
+	 * a compiler temporary, but it's value is never used across
+	 * a system call.  Therefore %g6 is usable for orig_i0 storage.
+	 */
 	if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C))
-		restart_syscall = 1;
-	else
-		restart_syscall = 0;
+		regs->u_regs[UREG_G6] = orig_i0;
 
 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
 		oldset = &current->saved_sigmask;
@@ -535,8 +551,12 @@
 	 * the software "in syscall" bit, directing us to not perform
 	 * a syscall restart.
 	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
-		restart_syscall = 0;
+	restart_syscall = 0;
+	if (pt_regs_is_syscall(regs) && (regs->psr & PSR_C)) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
+
 
 	if (signr > 0) {
 		if (restart_syscall)
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index a2b8159..f0836cd 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -529,11 +529,27 @@
 	siginfo_t info;
 	int signr;
 	
+	/* It's a lot of work and synchronization to add a new ptrace
+	 * register for GDB to save and restore in order to get
+	 * orig_i0 correct for syscall restarts when debugging.
+	 *
+	 * Although it should be the case that most of the global
+	 * registers are volatile across a system call, glibc already
+	 * depends upon that fact that we preserve them.  So we can't
+	 * just use any global register to save away the orig_i0 value.
+	 *
+	 * In particular %g2, %g3, %g4, and %g5 are all assumed to be
+	 * preserved across a system call trap by various pieces of
+	 * code in glibc.
+	 *
+	 * %g7 is used as the "thread register".   %g6 is not used in
+	 * any fixed manner.  %g6 is used as a scratch register and
+	 * a compiler temporary, but it's value is never used across
+	 * a system call.  Therefore %g6 is usable for orig_i0 storage.
+	 */
 	if (pt_regs_is_syscall(regs) &&
-	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
-		restart_syscall = 1;
-	} else
-		restart_syscall = 0;
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
+		regs->u_regs[UREG_G6] = orig_i0;
 
 	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
@@ -542,22 +558,20 @@
 
 #ifdef CONFIG_COMPAT
 	if (test_thread_flag(TIF_32BIT)) {
-		extern void do_signal32(sigset_t *, struct pt_regs *,
-					int restart_syscall,
-					unsigned long orig_i0);
-		do_signal32(oldset, regs, restart_syscall, orig_i0);
+		extern void do_signal32(sigset_t *, struct pt_regs *);
+		do_signal32(oldset, regs);
 		return;
 	}
 #endif	
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 
-	/* If the debugger messes with the program counter, it clears
-	 * the software "in syscall" bit, directing us to not perform
-	 * a syscall restart.
-	 */
-	if (restart_syscall && !pt_regs_is_syscall(regs))
-		restart_syscall = 0;
+	restart_syscall = 0;
+	if (pt_regs_is_syscall(regs) &&
+	    (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY))) {
+		restart_syscall = 1;
+		orig_i0 = regs->u_regs[UREG_G6];
+	}
 
 	if (signr > 0) {
 		if (restart_syscall)
diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c
index e7dc508..b19570d 100644
--- a/arch/sparc/kernel/sigutil_64.c
+++ b/arch/sparc/kernel/sigutil_64.c
@@ -2,6 +2,7 @@
 #include <linux/types.h>
 #include <linux/thread_info.h>
 #include <linux/uaccess.h>
+#include <linux/errno.h>
 
 #include <asm/sigcontext.h>
 #include <asm/fpumacro.h>
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 09d8ec4..63402f9 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -84,4 +84,4 @@
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 /*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-/*335*/	.long sys_syncfs, sys_sendmmsg, sys_setns
+/*335*/	.long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index edbec45..db86b1a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -85,7 +85,7 @@
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
 	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
-	.word sys_syncfs, compat_sys_sendmmsg, sys_setns
+	.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
 
 #endif /* CONFIG_COMPAT */
 
@@ -162,4 +162,4 @@
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
 	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
 /*330*/	.word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
-	.word sys_syncfs, sys_sendmmsg, sys_setns
+	.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index e3cda21..301421c 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -8,7 +8,6 @@
 obj-y                   += fault_$(BITS).o
 obj-y                   += init_$(BITS).o
 obj-$(CONFIG_SPARC32)   += loadmmu.o
-obj-y                   += generic_$(BITS).o
 obj-$(CONFIG_SPARC32)   += extable.o btfixup.o srmmu.o iommu.o io-unit.o
 obj-$(CONFIG_SPARC32)   += hypersparc.o viking.o tsunami.o swift.o
 obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
diff --git a/arch/sparc/mm/generic_32.c b/arch/sparc/mm/generic_32.c
deleted file mode 100644
index 6ca39a6..0000000
--- a/arch/sparc/mm/generic_32.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- *            MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-#include <linux/export.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		set_pte_at(mm, address, pte, mk_pte_io(offset, prot, space));
-		address += PAGE_SIZE;
-		offset += PAGE_SIZE;
-		pte++;
-	} while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	offset -= address;
-	do {
-		pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-	return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-		       unsigned long pfn, unsigned long size, pgprot_t prot)
-{
-	int error = 0;
-	pgd_t * dir;
-	unsigned long beg = from;
-	unsigned long end = from + size;
-	struct mm_struct *mm = vma->vm_mm;
-	int space = GET_IOSPACE(pfn);
-	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-
-	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
-	vma->vm_pgoff = (offset >> PAGE_SHIFT) |
-		((unsigned long)space << 28UL);
-
-	offset -= from;
-	dir = pgd_offset(mm, from);
-	flush_cache_range(vma, beg, end);
-
-	while (from < end) {
-		pmd_t *pmd = pmd_alloc(mm, dir, from);
-		error = -ENOMEM;
-		if (!pmd)
-			break;
-		error = io_remap_pmd_range(mm, pmd, from, end - from, offset + from, prot, space);
-		if (error)
-			break;
-		from = (from + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	}
-
-	flush_tlb_range(vma, beg, end);
-	return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
diff --git a/arch/sparc/mm/generic_64.c b/arch/sparc/mm/generic_64.c
deleted file mode 100644
index 9b357dd..0000000
--- a/arch/sparc/mm/generic_64.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * generic.c: Generic Sparc mm routines that are not dependent upon
- *            MMU type but are Sparc specific.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/export.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-/* Remap IO memory, the same way as remap_pfn_range(), but use
- * the obio memory space.
- *
- * They use a pgprot that sets PAGE_IO and does not check the
- * mem_map table as this is independent of normal memory.
- */
-static inline void io_remap_pte_range(struct mm_struct *mm, pte_t * pte,
-				      unsigned long address,
-				      unsigned long size,
-				      unsigned long offset, pgprot_t prot,
-				      int space)
-{
-	unsigned long end;
-
-	/* clear hack bit that was used as a write_combine side-effect flag */
-	offset &= ~0x1UL;
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		pte_t entry;
-		unsigned long curend = address + PAGE_SIZE;
-		
-		entry = mk_pte_io(offset, prot, space, PAGE_SIZE);
-		if (!(address & 0xffff)) {
-			if (PAGE_SIZE < (4 * 1024 * 1024) &&
-			    !(address & 0x3fffff) &&
-			    !(offset & 0x3ffffe) &&
-			    end >= address + 0x400000) {
-				entry = mk_pte_io(offset, prot, space,
-						  4 * 1024 * 1024);
-				curend = address + 0x400000;
-				offset += 0x400000;
-			} else if (PAGE_SIZE < (512 * 1024) &&
-				   !(address & 0x7ffff) &&
-				   !(offset & 0x7fffe) &&
-				   end >= address + 0x80000) {
-				entry = mk_pte_io(offset, prot, space,
-						  512 * 1024 * 1024);
-				curend = address + 0x80000;
-				offset += 0x80000;
-			} else if (PAGE_SIZE < (64 * 1024) &&
-				   !(offset & 0xfffe) &&
-				   end >= address + 0x10000) {
-				entry = mk_pte_io(offset, prot, space,
-						  64 * 1024);
-				curend = address + 0x10000;
-				offset += 0x10000;
-			} else
-				offset += PAGE_SIZE;
-		} else
-			offset += PAGE_SIZE;
-
-		if (pte_write(entry))
-			entry = pte_mkdirty(entry);
-		do {
-			BUG_ON(!pte_none(*pte));
-			set_pte_at(mm, address, pte, entry);
-			address += PAGE_SIZE;
-			pte_val(entry) += PAGE_SIZE;
-			pte++;
-		} while (address < curend);
-	} while (address < end);
-}
-
-static inline int io_remap_pmd_range(struct mm_struct *mm, pmd_t * pmd, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	offset -= address;
-	do {
-		pte_t *pte = pte_alloc_map(mm, NULL, pmd, address);
-		if (!pte)
-			return -ENOMEM;
-		io_remap_pte_range(mm, pte, address, end - address, address + offset, prot, space);
-		pte_unmap(pte);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-	return 0;
-}
-
-static inline int io_remap_pud_range(struct mm_struct *mm, pud_t * pud, unsigned long address, unsigned long size,
-	unsigned long offset, pgprot_t prot, int space)
-{
-	unsigned long end;
-
-	address &= ~PUD_MASK;
-	end = address + size;
-	if (end > PUD_SIZE)
-		end = PUD_SIZE;
-	offset -= address;
-	do {
-		pmd_t *pmd = pmd_alloc(mm, pud, address);
-		if (!pud)
-			return -ENOMEM;
-		io_remap_pmd_range(mm, pmd, address, end - address, address + offset, prot, space);
-		address = (address + PUD_SIZE) & PUD_MASK;
-		pud++;
-	} while (address < end);
-	return 0;
-}
-
-int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-		unsigned long pfn, unsigned long size, pgprot_t prot)
-{
-	int error = 0;
-	pgd_t * dir;
-	unsigned long beg = from;
-	unsigned long end = from + size;
-	struct mm_struct *mm = vma->vm_mm;
-	int space = GET_IOSPACE(pfn);
-	unsigned long offset = GET_PFN(pfn) << PAGE_SHIFT;
-	unsigned long phys_base;
-
-	phys_base = offset | (((unsigned long) space) << 32UL);
-
-	/* See comment in mm/memory.c remap_pfn_range */
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
-	vma->vm_pgoff = phys_base >> PAGE_SHIFT;
-
-	offset -= from;
-	dir = pgd_offset(mm, from);
-	flush_cache_range(vma, beg, end);
-
-	while (from < end) {
-		pud_t *pud = pud_alloc(mm, dir, from);
-		error = -ENOMEM;
-		if (!pud)
-			break;
-		error = io_remap_pud_range(mm, pud, from, end - from, offset + from, prot, space);
-		if (error)
-			break;
-		from = (from + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	}
-
-	flush_tlb_range(vma, beg, end);
-	return error;
-}
-EXPORT_SYMBOL(io_remap_pfn_range);
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index e57dcce..942ed61 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -237,13 +237,13 @@
 
 config I2C_BATTERY_BQ27200
 	tristate "I2C Battery BQ27200 Support"
-	select PUV3_I2C
+	select I2C_PUV3
 	select POWER_SUPPLY
 	select BATTERY_BQ27x00
 
 config I2C_EEPROM_AT24
 	tristate "I2C EEPROMs AT24 support"
-	select PUV3_I2C
+	select I2C_PUV3
 	select MISC_DEVICES
 	select EEPROM_AT24
 
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
index ae2ec33..1a36262 100644
--- a/arch/unicore32/Kconfig.debug
+++ b/arch/unicore32/Kconfig.debug
@@ -44,18 +44,4 @@
 	  Say Y here if you want the debug print routines to direct their
 	  output to the UniCore On-Chip-Debugger channel using CP #1.
 
-config DEBUG_OCD_BREAKPOINT
-	bool "Breakpoint support via On-Chip-Debugger"
-	depends on DEBUG_OCD
-
-config DEBUG_UART
-	int "Kernel low-level debugging messages via serial port"
-	depends on DEBUG_LL
-	range 0 1
-	default "0"
-	help
-	  Choice for UART for kernel low-level using PKUnity UARTS,
-	  should be between zero and one. The port must have been
-	  initialised by the boot-loader before use.
-
 endmenu
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
index b0954a2..950a9af 100644
--- a/arch/unicore32/boot/compressed/Makefile
+++ b/arch/unicore32/boot/compressed/Makefile
@@ -10,8 +10,8 @@
 # Copyright (C) 2001~2010 GUAN Xue-tao
 #
 
-EXTRA_CFLAGS	:= -fpic -fno-builtin
-EXTRA_AFLAGS	:= -Wa,-march=all
+ccflags-y	:= -fpic -fno-builtin
+asflags-y	:= -Wa,-march=all
 
 OBJS		:= misc.o
 
diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h
index 1628a63..401f597 100644
--- a/arch/unicore32/include/asm/bitops.h
+++ b/arch/unicore32/include/asm/bitops.h
@@ -13,12 +13,6 @@
 #ifndef __UNICORE_BITOPS_H__
 #define __UNICORE_BITOPS_H__
 
-#define find_next_bit		__uc32_find_next_bit
-#define find_next_zero_bit	__uc32_find_next_zero_bit
-
-#define find_first_bit		__uc32_find_first_bit
-#define find_first_zero_bit	__uc32_find_first_zero_bit
-
 #define _ASM_GENERIC_BITOPS_FLS_H_
 #define _ASM_GENERIC_BITOPS___FLS_H_
 #define _ASM_GENERIC_BITOPS_FFS_H_
@@ -44,4 +38,10 @@
 
 #include <asm-generic/bitops.h>
 
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit		find_next_bit
+#define find_next_zero_bit	find_next_zero_bit
+#define find_first_bit		find_first_bit
+#define find_first_zero_bit	find_first_zero_bit
+
 #endif /* __UNICORE_BITOPS_H__ */
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
index e11cb07..f0d780a 100644
--- a/arch/unicore32/include/asm/processor.h
+++ b/arch/unicore32/include/asm/processor.h
@@ -53,7 +53,6 @@
 #define start_thread(regs, pc, sp)					\
 ({									\
 	unsigned long *stack = (unsigned long *)sp;			\
-	set_fs(USER_DS);						\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	regs->UCreg_asr = USER_MODE;					\
 	regs->UCreg_pc = pc & ~1;	/* pc */                        \
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
index a897080..d98bd81 100644
--- a/arch/unicore32/kernel/ksyms.c
+++ b/arch/unicore32/kernel/ksyms.c
@@ -24,8 +24,8 @@
 
 #include "ksyms.h"
 
-EXPORT_SYMBOL(__uc32_find_next_zero_bit);
-EXPORT_SYMBOL(__uc32_find_next_bit);
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_next_bit);
 
 EXPORT_SYMBOL(__backtrace);
 
diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S
index c360ce9..c777462 100644
--- a/arch/unicore32/lib/findbit.S
+++ b/arch/unicore32/lib/findbit.S
@@ -17,7 +17,7 @@
  * Purpose  : Find a 'zero' bit
  * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
  */
-__uc32_find_first_zero_bit:
+ENTRY(find_first_zero_bit)
 		cxor.a	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -29,13 +29,14 @@
 		bub	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(find_first_zero_bit)
 
 /*
  * Purpose  : Find next 'zero' bit
  * Prototype: int find_next_zero_bit
  *		(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(__uc32_find_next_zero_bit)
+ENTRY(find_next_zero_bit)
 		cxor.a	r1, #0
 		beq	3b
 		and.a	ip, r2, #7
@@ -47,14 +48,14 @@
 		or	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(__uc32_find_next_zero_bit)
+ENDPROC(find_next_zero_bit)
 
 /*
  * Purpose  : Find a 'one' bit
  * Prototype: int find_first_bit
  *		(const unsigned long *addr, unsigned int maxbit);
  */
-__uc32_find_first_bit:
+ENTRY(find_first_bit)
 		cxor.a	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -66,13 +67,14 @@
 		bub	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
+ENDPROC(find_first_bit)
 
 /*
  * Purpose  : Find next 'one' bit
  * Prototype: int find_next_zero_bit
  *		(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(__uc32_find_next_bit)
+ENTRY(find_next_bit)
 		cxor.a	r1, #0
 		beq	3b
 		and.a	ip, r2, #7
@@ -83,7 +85,7 @@
 		or	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(__uc32_find_next_bit)
+ENDPROC(find_next_bit)
 
 /*
  * One or more bits in the LSB of r3 are assumed to be set.
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9b7273c..1a6c09a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -49,6 +49,7 @@
 extern int local_apic_timer_c2_ok;
 
 extern int disable_apic;
+extern unsigned int lapic_timer_frequency;
 
 #ifdef CONFIG_SMP
 extern void __inquire_remote_apic(int apicid);
diff --git a/arch/x86/include/asm/mach_traps.h b/arch/x86/include/asm/mach_traps.h
index 72a8b52..a01e7ec7 100644
--- a/arch/x86/include/asm/mach_traps.h
+++ b/arch/x86/include/asm/mach_traps.h
@@ -17,7 +17,7 @@
 #define NMI_REASON_CLEAR_IOCHK	0x08
 #define NMI_REASON_CLEAR_MASK	0x0f
 
-static inline unsigned char get_nmi_reason(void)
+static inline unsigned char default_get_nmi_reason(void)
 {
 	return inb(NMI_REASON_PORT);
 }
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index c9321f3..0e8ae57 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -201,7 +201,10 @@
 void mce_notify_process(void);
 
 DECLARE_PER_CPU(struct mce, injectm);
-extern struct file_operations mce_chrdev_ops;
+
+extern void register_mce_write_callback(ssize_t (*)(struct file *filp,
+				    const char __user *ubuf,
+				    size_t usize, loff_t *off));
 
 /*
  * Exception handler
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 4707760..7216907 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -44,6 +44,13 @@
 
 extern enum mrst_timer_options mrst_timer_options;
 
+/*
+ * Penwell uses spread spectrum clock, so the freq number is not exactly
+ * the same as reported by MSR based on SDM.
+ */
+#define PENWELL_FSB_FREQ_83SKU         83200
+#define PENWELL_FSB_FREQ_100SKU        99840
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index d3d8590..1971e65 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -152,6 +152,7 @@
 /**
  * struct x86_platform_ops - platform specific runtime functions
  * @calibrate_tsc:		calibrate TSC
+ * @wallclock_init:		init the wallclock device
  * @get_wallclock:		get time from HW clock like RTC etc.
  * @set_wallclock:		set time back to HW clock
  * @is_untracked_pat_range	exclude from PAT logic
@@ -160,11 +161,13 @@
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
+	void (*wallclock_init)(void);
 	unsigned long (*get_wallclock)(void);
 	int (*set_wallclock)(unsigned long nowtime);
 	void (*iommu_shutdown)(void);
 	bool (*is_untracked_pat_range)(u64 start, u64 end);
 	void (*nmi_init)(void);
+	unsigned char (*get_nmi_reason)(void);
 	int (*i8042_detect)(void);
 };
 
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index c638228..1f84794 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -738,5 +738,5 @@
 
 	atomic_set(&stop_machine_first, 1);
 	wrote_text = 0;
-	__stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+	__stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
 }
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a2fd72e..f98d84c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -186,7 +186,7 @@
 	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
 };
 
-static unsigned int calibration_result;
+unsigned int lapic_timer_frequency = 0;
 
 static void apic_pm_activate(void);
 
@@ -454,7 +454,7 @@
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 	case CLOCK_EVT_MODE_ONESHOT:
-		__setup_APIC_LVTT(calibration_result,
+		__setup_APIC_LVTT(lapic_timer_frequency,
 				  mode != CLOCK_EVT_MODE_PERIODIC, 1);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
@@ -638,6 +638,25 @@
 	long delta, deltatsc;
 	int pm_referenced = 0;
 
+	/**
+	 * check if lapic timer has already been calibrated by platform
+	 * specific routine, such as tsc calibration code. if so, we just fill
+	 * in the clockevent structure and return.
+	 */
+
+	if (lapic_timer_frequency) {
+		apic_printk(APIC_VERBOSE, "lapic timer already calibrated %d\n",
+				lapic_timer_frequency);
+		lapic_clockevent.mult = div_sc(lapic_timer_frequency/APIC_DIVISOR,
+					TICK_NSEC, lapic_clockevent.shift);
+		lapic_clockevent.max_delta_ns =
+			clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
+		lapic_clockevent.min_delta_ns =
+			clockevent_delta2ns(0xF, &lapic_clockevent);
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+		return 0;
+	}
+
 	local_irq_disable();
 
 	/* Replace the global interrupt handler */
@@ -679,12 +698,12 @@
 	lapic_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &lapic_clockevent);
 
-	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
+	lapic_timer_frequency = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
 
 	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
 	apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
 	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
-		    calibration_result);
+		    lapic_timer_frequency);
 
 	if (cpu_has_tsc) {
 		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
@@ -695,13 +714,13 @@
 
 	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
 		    "%u.%04u MHz.\n",
-		    calibration_result / (1000000 / HZ),
-		    calibration_result % (1000000 / HZ));
+		    lapic_timer_frequency / (1000000 / HZ),
+		    lapic_timer_frequency % (1000000 / HZ));
 
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
-	if (calibration_result < (1000000 / HZ)) {
+	if (lapic_timer_frequency < (1000000 / HZ)) {
 		local_irq_enable();
 		pr_warning("APIC frequency too slow, disabling apic timer\n");
 		return -1;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3c31fa9..6d939d7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -193,10 +193,8 @@
 	struct irq_cfg *cfg;
 	int count, node, i;
 
-	if (!legacy_pic->nr_legacy_irqs) {
-		nr_irqs_gsi = 0;
+	if (!legacy_pic->nr_legacy_irqs)
 		io_apic_irqs = ~0UL;
-	}
 
 	for (i = 0; i < nr_ioapics; i++) {
 		ioapics[i].saved_registers =
@@ -1696,6 +1694,7 @@
 	int ioapic_idx;
 	struct irq_cfg *cfg;
 	unsigned int irq;
+	struct irq_chip *chip;
 
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++)
@@ -1716,6 +1715,10 @@
 	for_each_active_irq(irq) {
 		struct irq_pin_list *entry;
 
+		chip = irq_get_chip(irq);
+		if (chip != &ioapic_chip)
+			continue;
+
 		cfg = irq_get_chip_data(irq);
 		if (!cfg)
 			continue;
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 6199232..319882e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -208,7 +208,7 @@
 	if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL))
 		return -ENOMEM;
 	printk(KERN_INFO "Machine check injector initialized\n");
-	mce_chrdev_ops.write = mce_write;
+	register_mce_write_callback(mce_write);
 	register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0,
 				"mce_notify");
 	return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 362056a..2af127d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1634,16 +1634,35 @@
 	}
 }
 
-/* Modified in mce-inject.c, so not static or const */
-struct file_operations mce_chrdev_ops = {
+static ssize_t (*mce_write)(struct file *filp, const char __user *ubuf,
+			    size_t usize, loff_t *off);
+
+void register_mce_write_callback(ssize_t (*fn)(struct file *filp,
+			     const char __user *ubuf,
+			     size_t usize, loff_t *off))
+{
+	mce_write = fn;
+}
+EXPORT_SYMBOL_GPL(register_mce_write_callback);
+
+ssize_t mce_chrdev_write(struct file *filp, const char __user *ubuf,
+			 size_t usize, loff_t *off)
+{
+	if (mce_write)
+		return mce_write(filp, ubuf, usize, off);
+	else
+		return -EINVAL;
+}
+
+static const struct file_operations mce_chrdev_ops = {
 	.open			= mce_chrdev_open,
 	.release		= mce_chrdev_release,
 	.read			= mce_chrdev_read,
+	.write			= mce_chrdev_write,
 	.poll			= mce_chrdev_poll,
 	.unlocked_ioctl		= mce_chrdev_ioctl,
 	.llseek			= no_llseek,
 };
-EXPORT_SYMBOL_GPL(mce_chrdev_ops);
 
 static struct miscdevice mce_chrdev_device = {
 	MISC_MCELOG_MINOR,
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index c1a0188..44842d7 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -74,9 +74,10 @@
 	struct pvclock_vcpu_time_info *src;
 	cycle_t ret;
 
-	src = &get_cpu_var(hv_clock);
+	preempt_disable_notrace();
+	src = &__get_cpu_var(hv_clock);
 	ret = pvclock_clocksource_read(src);
-	put_cpu_var(hv_clock);
+	preempt_enable_notrace();
 	return ret;
 }
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index b9c8628..e88f37b 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -29,6 +29,7 @@
 #include <asm/traps.h>
 #include <asm/mach_traps.h>
 #include <asm/nmi.h>
+#include <asm/x86_init.h>
 
 #define NMI_MAX_NAMELEN	16
 struct nmiaction {
@@ -348,7 +349,7 @@
 
 	/* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
 	raw_spin_lock(&nmi_reason_lock);
-	reason = get_nmi_reason();
+	reason = x86_platform.get_nmi_reason();
 
 	if (reason & NMI_REASON_MASK) {
 		if (reason & NMI_REASON_SERR)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index afaf384..cf0ef98 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1045,6 +1045,8 @@
 
 	x86_init.timers.wallclock_init();
 
+	x86_platform.wallclock_init();
+
 	mcheck_init();
 
 	arch_init_ideal_nops();
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 6f164bd..c1d6cd5 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -21,12 +21,14 @@
 #include <asm/pat.h>
 #include <asm/tsc.h>
 #include <asm/iommu.h>
+#include <asm/mach_traps.h>
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
 void __init x86_init_pgd_noop(pgd_t *unused) { }
 int __init iommu_init_noop(void) { return 0; }
 void iommu_shutdown_noop(void) { }
+void wallclock_init_noop(void) { }
 
 /*
  * The platform setup functions are preset with the default functions
@@ -97,11 +99,13 @@
 
 struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
+	.wallclock_init			= wallclock_init_noop,
 	.get_wallclock			= mach_get_cmos_time,
 	.set_wallclock			= mach_set_rtc_mmss,
 	.iommu_shutdown			= iommu_shutdown_noop,
 	.is_untracked_pat_range		= is_ISA_range,
 	.nmi_init			= default_nmi_init,
+	.get_nmi_reason			= default_get_nmi_reason,
 	.i8042_detect			= default_i8042_detect
 };
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index a0d6bd9..579a0b5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -39,6 +39,7 @@
 #include <asm/mce.h>
 #include <asm/i387.h>
 #include <asm/xcr.h>
+#include <asm/perf_event.h>
 
 #include "trace.h"
 
@@ -118,7 +119,7 @@
 static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
 module_param(ple_window, int, S_IRUGO);
 
-#define NR_AUTOLOAD_MSRS 1
+#define NR_AUTOLOAD_MSRS 8
 #define VMCS02_POOL_SIZE 1
 
 struct vmcs {
@@ -622,6 +623,7 @@
 static unsigned long *vmx_msr_bitmap_longmode;
 
 static bool cpu_has_load_ia32_efer;
+static bool cpu_has_load_perf_global_ctrl;
 
 static DECLARE_BITMAP(vmx_vpid_bitmap, VMX_NR_VPIDS);
 static DEFINE_SPINLOCK(vmx_vpid_lock);
@@ -1191,15 +1193,34 @@
 	vmcs_write32(EXCEPTION_BITMAP, eb);
 }
 
+static void clear_atomic_switch_msr_special(unsigned long entry,
+		unsigned long exit)
+{
+	vmcs_clear_bits(VM_ENTRY_CONTROLS, entry);
+	vmcs_clear_bits(VM_EXIT_CONTROLS, exit);
+}
+
 static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
 {
 	unsigned i;
 	struct msr_autoload *m = &vmx->msr_autoload;
 
-	if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
-		vmcs_clear_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
-		vmcs_clear_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
-		return;
+	switch (msr) {
+	case MSR_EFER:
+		if (cpu_has_load_ia32_efer) {
+			clear_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+					VM_EXIT_LOAD_IA32_EFER);
+			return;
+		}
+		break;
+	case MSR_CORE_PERF_GLOBAL_CTRL:
+		if (cpu_has_load_perf_global_ctrl) {
+			clear_atomic_switch_msr_special(
+					VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+					VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+			return;
+		}
+		break;
 	}
 
 	for (i = 0; i < m->nr; ++i)
@@ -1215,25 +1236,55 @@
 	vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
 }
 
+static void add_atomic_switch_msr_special(unsigned long entry,
+		unsigned long exit, unsigned long guest_val_vmcs,
+		unsigned long host_val_vmcs, u64 guest_val, u64 host_val)
+{
+	vmcs_write64(guest_val_vmcs, guest_val);
+	vmcs_write64(host_val_vmcs, host_val);
+	vmcs_set_bits(VM_ENTRY_CONTROLS, entry);
+	vmcs_set_bits(VM_EXIT_CONTROLS, exit);
+}
+
 static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
 				  u64 guest_val, u64 host_val)
 {
 	unsigned i;
 	struct msr_autoload *m = &vmx->msr_autoload;
 
-	if (msr == MSR_EFER && cpu_has_load_ia32_efer) {
-		vmcs_write64(GUEST_IA32_EFER, guest_val);
-		vmcs_write64(HOST_IA32_EFER, host_val);
-		vmcs_set_bits(VM_ENTRY_CONTROLS, VM_ENTRY_LOAD_IA32_EFER);
-		vmcs_set_bits(VM_EXIT_CONTROLS, VM_EXIT_LOAD_IA32_EFER);
-		return;
+	switch (msr) {
+	case MSR_EFER:
+		if (cpu_has_load_ia32_efer) {
+			add_atomic_switch_msr_special(VM_ENTRY_LOAD_IA32_EFER,
+					VM_EXIT_LOAD_IA32_EFER,
+					GUEST_IA32_EFER,
+					HOST_IA32_EFER,
+					guest_val, host_val);
+			return;
+		}
+		break;
+	case MSR_CORE_PERF_GLOBAL_CTRL:
+		if (cpu_has_load_perf_global_ctrl) {
+			add_atomic_switch_msr_special(
+					VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL,
+					VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL,
+					GUEST_IA32_PERF_GLOBAL_CTRL,
+					HOST_IA32_PERF_GLOBAL_CTRL,
+					guest_val, host_val);
+			return;
+		}
+		break;
 	}
 
 	for (i = 0; i < m->nr; ++i)
 		if (m->guest[i].index == msr)
 			break;
 
-	if (i == m->nr) {
+	if (i == NR_AUTOLOAD_MSRS) {
+		printk_once(KERN_WARNING"Not enough mst switch entries. "
+				"Can't add msr %x\n", msr);
+		return;
+	} else if (i == m->nr) {
 		++m->nr;
 		vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr);
 		vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
@@ -2455,6 +2506,42 @@
 		&& allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
 				   VM_EXIT_LOAD_IA32_EFER);
 
+	cpu_has_load_perf_global_ctrl =
+		allow_1_setting(MSR_IA32_VMX_ENTRY_CTLS,
+				VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
+		&& allow_1_setting(MSR_IA32_VMX_EXIT_CTLS,
+				   VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL);
+
+	/*
+	 * Some cpus support VM_ENTRY_(LOAD|SAVE)_IA32_PERF_GLOBAL_CTRL
+	 * but due to arrata below it can't be used. Workaround is to use
+	 * msr load mechanism to switch IA32_PERF_GLOBAL_CTRL.
+	 *
+	 * VM Exit May Incorrectly Clear IA32_PERF_GLOBAL_CTRL [34:32]
+	 *
+	 * AAK155             (model 26)
+	 * AAP115             (model 30)
+	 * AAT100             (model 37)
+	 * BC86,AAY89,BD102   (model 44)
+	 * BA97               (model 46)
+	 *
+	 */
+	if (cpu_has_load_perf_global_ctrl && boot_cpu_data.x86 == 0x6) {
+		switch (boot_cpu_data.x86_model) {
+		case 26:
+		case 30:
+		case 37:
+		case 44:
+		case 46:
+			cpu_has_load_perf_global_ctrl = false;
+			printk_once(KERN_WARNING"kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL "
+					"does not work properly. Using workaround\n");
+			break;
+		default:
+			break;
+		}
+	}
+
 	return 0;
 }
 
@@ -5968,6 +6055,24 @@
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0);
 }
 
+static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
+{
+	int i, nr_msrs;
+	struct perf_guest_switch_msr *msrs;
+
+	msrs = perf_guest_get_msrs(&nr_msrs);
+
+	if (!msrs)
+		return;
+
+	for (i = 0; i < nr_msrs; i++)
+		if (msrs[i].host == msrs[i].guest)
+			clear_atomic_switch_msr(vmx, msrs[i].msr);
+		else
+			add_atomic_switch_msr(vmx, msrs[i].msr, msrs[i].guest,
+					msrs[i].host);
+}
+
 #ifdef CONFIG_X86_64
 #define R "r"
 #define Q "q"
@@ -6017,6 +6122,8 @@
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		vmx_set_interrupt_shadow(vcpu, 0);
 
+	atomic_switch_perf_msrs(vmx);
+
 	vmx->__launched = vmx->loaded_vmcs->launched;
 	asm(
 		/* Store host registers */
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 28071bb..4c61b52 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -109,7 +109,7 @@
 }
 
 #else
-static inline void sdv_serial_fixup(void);
+static inline void sdv_serial_fixup(void) {};
 #endif
 
 static void __init sdv_arch_setup(void)
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 6ed7afd..b1489a0 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -187,11 +187,34 @@
 static unsigned long __init mrst_calibrate_tsc(void)
 {
 	unsigned long flags, fast_calibrate;
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
+		u32 lo, hi, ratio, fsb;
 
-	local_irq_save(flags);
-	fast_calibrate = apbt_quick_calibrate();
-	local_irq_restore(flags);
-
+		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+		pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+		ratio = (hi >> 8) & 0x1f;
+		pr_debug("ratio is %d\n", ratio);
+		if (!ratio) {
+			pr_err("read a zero ratio, should be incorrect!\n");
+			pr_err("force tsc ratio to 16 ...\n");
+			ratio = 16;
+		}
+		rdmsr(MSR_FSB_FREQ, lo, hi);
+		if ((lo & 0x7) == 0x7)
+			fsb = PENWELL_FSB_FREQ_83SKU;
+		else
+			fsb = PENWELL_FSB_FREQ_100SKU;
+		fast_calibrate = ratio * fsb;
+		pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+		lapic_timer_frequency = fsb * 1000 / HZ;
+		/* mark tsc clocksource as reliable */
+		set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+	} else {
+		local_irq_save(flags);
+		fast_calibrate = apbt_quick_calibrate();
+		local_irq_restore(flags);
+	}
+	
 	if (fast_calibrate)
 		return fast_calibrate;
 
@@ -254,6 +277,17 @@
 }
 
 /*
+ * Moorestown does not have external NMI source nor port 0x61 to report
+ * NMI status. The possible NMI sources are from pmu as a result of NMI
+ * watchdog or lock debug. Reading io port 0x61 results in 0xff which
+ * misled NMI handler.
+ */
+static unsigned char mrst_get_nmi_reason(void)
+{
+	return 0;
+}
+
+/*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
  */
@@ -274,6 +308,8 @@
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
 	x86_platform.i8042_detect = mrst_i8042_detect;
 	x86_init.timers.wallclock_init = mrst_rtc_init;
+	x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+
 	x86_init.pci.init = pci_mrst_init;
 	x86_init.pci.fixup_irqs = x86_init_noop;
 
@@ -608,6 +644,7 @@
 }
 
 static const struct devs_id __initconst device_ids[] = {
+	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
 	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
 	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index a8ac6f1..225bd0f 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -76,8 +76,8 @@
 
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	/* vRTC YEAR reg contains the offset to 1960 */
-	year += 1960;
+	/* vRTC YEAR reg contains the offset to 1972 */
+	year += 1972;
 
 	printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
 		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h
index 118c143..2c32df6 100644
--- a/arch/x86/um/asm/processor.h
+++ b/arch/x86/um/asm/processor.h
@@ -11,7 +11,7 @@
 #endif
 
 #define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_SP)
 #define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
 
 #define ARCH_IS_STACKGROW(address) \
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index da8afd5..1f92865 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1356,7 +1356,7 @@
 	int cpu = (long)hcpu;
 	switch (action) {
 	case CPU_UP_PREPARE:
-		per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+		xen_vcpu_setup(cpu);
 		if (xen_have_vector_callback)
 			xen_init_lock_cpu(cpu);
 		break;
@@ -1386,7 +1386,6 @@
 	xen_hvm_smp_init();
 	register_cpu_notifier(&xen_hvm_cpu_notifier);
 	xen_unplug_emulated_devices();
-	have_vcpu_info_placement = 0;
 	x86_init.irqs.intr_init = xen_init_IRQ;
 	xen_hvm_init_time_ops();
 	xen_hvm_init_mmu_ops();
diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c
index 6bbfd7a..5a40d24 100644
--- a/arch/x86/xen/grant-table.c
+++ b/arch/x86/xen/grant-table.c
@@ -71,7 +71,7 @@
 
 	if (shared == NULL) {
 		struct vm_struct *area =
-			alloc_vm_area(PAGE_SIZE * max_nr_gframes);
+			alloc_vm_area(PAGE_SIZE * max_nr_gframes, NULL);
 		BUG_ON(area == NULL);
 		shared = area->addr;
 		*__shared = shared;
diff --git a/block/blk-core.c b/block/blk-core.c
index f43c8a5..ea70e6c 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1379,15 +1379,19 @@
 		 */
 		if (list_empty(&plug->list))
 			trace_block_plug(q);
-		else if (!plug->should_sort) {
-			struct request *__rq;
+		else {
+			if (!plug->should_sort) {
+				struct request *__rq;
 
-			__rq = list_entry_rq(plug->list.prev);
-			if (__rq->q != q)
-				plug->should_sort = 1;
+				__rq = list_entry_rq(plug->list.prev);
+				if (__rq->q != q)
+					plug->should_sort = 1;
+			}
+			if (request_count >= BLK_MAX_REQUEST_COUNT) {
+				blk_flush_plug_list(plug, false);
+				trace_block_plug(q);
+			}
 		}
-		if (request_count >= BLK_MAX_REQUEST_COUNT)
-			blk_flush_plug_list(plug, false);
 		list_add_tail(&req->queuelist, &plug->list);
 		drive_stat_acct(req, 1);
 	} else {
diff --git a/block/blk-map.c b/block/blk-map.c
index e663ac2..164cd00 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -204,10 +204,11 @@
 		if (!iov[i].iov_len)
 			return -EINVAL;
 
-		if (uaddr & queue_dma_alignment(q)) {
+		/*
+		 * Keep going so we check length of all segments
+		 */
+		if (uaddr & queue_dma_alignment(q))
 			unaligned = 1;
-			break;
-		}
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)
diff --git a/block/genhd.c b/block/genhd.c
index 9253839..02e9fca 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -19,7 +19,6 @@
 #include <linux/mutex.h>
 #include <linux/idr.h>
 #include <linux/log2.h>
-#include <linux/ctype.h>
 
 #include "blk.h"
 
@@ -916,74 +915,6 @@
 
 subsys_initcall(genhd_device_init);
 
-static ssize_t alias_show(struct device *dev,
-			       struct device_attribute *attr, char *buf)
-{
-	struct gendisk *disk = dev_to_disk(dev);
-	ssize_t ret = 0;
-
-	if (disk->alias)
-		ret = snprintf(buf, ALIAS_LEN, "%s\n", disk->alias);
-	return ret;
-}
-
-static ssize_t alias_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct gendisk *disk = dev_to_disk(dev);
-	char *alias;
-	char *envp[] = { NULL, NULL };
-	unsigned char c;
-	int i;
-	ssize_t ret = count;
-
-	if (!count)
-		return -EINVAL;
-
-	if (count >= ALIAS_LEN) {
-		printk(KERN_ERR "alias: alias is too long\n");
-		return -EINVAL;
-	}
-
-	/* Validation check */
-	for (i = 0; i < count; i++) {
-		c = buf[i];
-		if (i == count - 1 && c == '\n')
-			break;
-		if (!isalnum(c) && c != '_' && c != '-') {
-			printk(KERN_ERR "alias: invalid alias\n");
-			return -EINVAL;
-		}
-	}
-
-	if (disk->alias) {
-		printk(KERN_INFO "alias: %s is already assigned (%s)\n",
-		       disk->disk_name, disk->alias);
-		return -EINVAL;
-	}
-
-	alias = kasprintf(GFP_KERNEL, "%s", buf);
-	if (!alias)
-		return -ENOMEM;
-
-	if (alias[count - 1] == '\n')
-		alias[count - 1] = '\0';
-
-	envp[0] = kasprintf(GFP_KERNEL, "ALIAS=%s", alias);
-	if (!envp[0]) {
-		kfree(alias);
-		return -ENOMEM;
-	}
-
-	disk->alias = alias;
-	printk(KERN_INFO "alias: assigned %s to %s\n", alias, disk->disk_name);
-
-	kobject_uevent_env(&dev->kobj, KOBJ_ADD, envp);
-
-	kfree(envp[0]);
-	return ret;
-}
-
 static ssize_t disk_range_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
@@ -1043,7 +974,6 @@
 	return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
 }
 
-static DEVICE_ATTR(alias, S_IRUGO|S_IWUSR, alias_show, alias_store);
 static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
 static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
 static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
@@ -1066,7 +996,6 @@
 #endif
 
 static struct attribute *disk_attrs[] = {
-	&dev_attr_alias.attr,
 	&dev_attr_range.attr,
 	&dev_attr_ext_range.attr,
 	&dev_attr_removable.attr,
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index a816f24..a0f768c 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -383,6 +383,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_blkcipher rblkcipher;
@@ -404,6 +405,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
@@ -457,6 +464,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_blkcipher rblkcipher;
@@ -478,6 +486,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/aead.c b/crypto/aead.c
index 701556f..04add3dc 100644
--- a/crypto/aead.c
+++ b/crypto/aead.c
@@ -111,6 +111,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_aead raead;
@@ -132,6 +133,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_aead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
@@ -190,6 +197,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_aead raead;
@@ -210,6 +218,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_nivaead_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 
 static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg)
diff --git a/crypto/ahash.c b/crypto/ahash.c
index a3e6ef9..ac93c99 100644
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -399,6 +399,7 @@
 	return sizeof(struct crypto_shash *);
 }
 
+#ifdef CONFIG_NET
 static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_hash rhash;
@@ -416,6 +417,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_ahash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_ahash_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c
index 2572d26..1e61d1a 100644
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -494,6 +494,7 @@
 		return crypto_init_blkcipher_ops_async(tfm);
 }
 
+#ifdef CONFIG_NET
 static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_blkcipher rblkcipher;
@@ -515,6 +516,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/crypto_user.c b/crypto/crypto_user.c
index 2abca78..0605a2b 100644
--- a/crypto/crypto_user.c
+++ b/crypto/crypto_user.c
@@ -44,9 +44,6 @@
 
 	down_read(&crypto_alg_sem);
 
-	if (list_empty(&crypto_alg_list))
-		return NULL;
-
 	list_for_each_entry(q, &crypto_alg_list, cra_list) {
 		int match = 0;
 
diff --git a/crypto/pcompress.c b/crypto/pcompress.c
index fefda78..2e458e5 100644
--- a/crypto/pcompress.c
+++ b/crypto/pcompress.c
@@ -48,6 +48,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_comp rpcomp;
@@ -62,6 +63,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_pcomp_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_pcomp_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/rng.c b/crypto/rng.c
index feb7de0..64f864f 100644
--- a/crypto/rng.c
+++ b/crypto/rng.c
@@ -60,6 +60,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_NET
 static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_rng rrng;
@@ -76,6 +77,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_rng_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_rng_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/crypto/shash.c b/crypto/shash.c
index ea8a9c6..91009127 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -524,6 +524,7 @@
 	return alg->cra_ctxsize;
 }
 
+#ifdef CONFIG_NET
 static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
 {
 	struct crypto_report_hash rhash;
@@ -541,6 +542,12 @@
 nla_put_failure:
 	return -EMSGSIZE;
 }
+#else
+static int crypto_shash_report(struct sk_buff *skb, struct crypto_alg *alg)
+{
+	return -ENOSYS;
+}
+#endif
 
 static void crypto_shash_show(struct seq_file *m, struct crypto_alg *alg)
 	__attribute__ ((unused));
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 73b2909..0e8e2de 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -224,7 +224,6 @@
 /*
  * Suspend / resume control
  */
-static int acpi_idle_suspend;
 static u32 saved_bm_rld;
 
 static void acpi_idle_bm_rld_save(void)
@@ -243,21 +242,13 @@
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
-	if (acpi_idle_suspend == 1)
-		return 0;
-
 	acpi_idle_bm_rld_save();
-	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
-	if (acpi_idle_suspend == 0)
-		return 0;
-
 	acpi_idle_bm_rld_restore();
-	acpi_idle_suspend = 0;
 	return 0;
 }
 
@@ -763,13 +754,6 @@
 
 	local_irq_disable();
 
-	/* Do not access any ACPI IO ports in suspend path */
-	if (acpi_idle_suspend) {
-		local_irq_enable();
-		cpu_relax();
-		return -EINVAL;
-	}
-
 	lapic_timer_state_broadcast(pr, cx, 1);
 	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
@@ -810,13 +794,6 @@
 
 	local_irq_disable();
 
-	if (acpi_idle_suspend) {
-		local_irq_enable();
-		cpu_relax();
-		return -EINVAL;
-	}
-
-
 	if (cx->entry_method != ACPI_CSTATE_FFH) {
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
@@ -895,12 +872,6 @@
 	if (unlikely(!pr))
 		return -EINVAL;
 
-
-	if (acpi_idle_suspend) {
-		cpu_relax();
-		return -EINVAL;
-	}
-
 	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
 		if (drv->safe_state_index >= 0) {
 			return drv->states[drv->safe_state_index].enter(dev,
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fb7b90b..cf26222 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -390,6 +390,9 @@
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
 
+	/* Asmedia */
+	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1061 */
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 004f2ce..43b8758 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -65,9 +65,9 @@
 static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev->platform_data;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct ata_port_info pi = ahci_port_info[id->driver_data];
+	struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;
@@ -191,7 +191,7 @@
 static int __devexit ahci_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev->platform_data;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	struct ata_host *host = dev_get_drvdata(dev);
 
 	ata_host_detach(host);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f22957c..a9b2820 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2883,7 +2883,7 @@
 	    sata_scr_read(link, SCR_STATUS, &sstatus))
 		rc = -ERESTART;
 
-	if (rc == -ERESTART || try >= max_tries) {
+	if (try >= max_tries) {
 		/*
 		 * Thaw host port even if reset failed, so that the port
 		 * can be retried on the next phy event.  This risks
@@ -2909,6 +2909,16 @@
 		ata_eh_acquire(ap);
 	}
 
+	/*
+	 * While disks spinup behind PMP, some controllers fail sending SRST.
+	 * They need to be reset - as well as the PMP - before retrying.
+	 */
+	if (rc == -ERESTART) {
+		if (ata_is_host_link(link))
+			ata_eh_thaw_port(ap);
+		goto out;
+	}
+
 	if (try == max_tries - 1) {
 		sata_down_spd_limit(link, 0);
 		if (slave)
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 104462d..21b80c5 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -389,12 +389,9 @@
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
 
-			/* Class code report is unreliable and SRST
-			 * times out under certain configurations.
-			 */
+			/* Class code report is unreliable. */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_NO_SRST |
-					       ATA_LFLAG_ASSUME_ATA;
+				link->flags |= ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 72a9770..2a5412e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1217,6 +1217,10 @@
 
 /**
  *	__ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ *	@ap: ATA port to which the device change the queue depth
+ *	@sdev: SCSI device to configure queue depth for
+ *	@queue_depth: new queue depth
+ *	@reason: calling context
  *
  *	libsas and libata have different approaches for associating a sdev to
  *	its ata_port.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 63d5327..4cadfa2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2533,10 +2533,12 @@
 	if (rc)
 		goto out;
 
+#ifdef CONFIG_ATA_BMDMA
 	if (bmdma)
 		/* prepare and activate BMDMA host */
 		rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	else
+#endif
 		/* prepare and activate SFF host */
 		rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
 	if (rc)
@@ -2544,10 +2546,12 @@
 	host->private_data = host_priv;
 	host->flags |= hflags;
 
+#ifdef CONFIG_ATA_BMDMA
 	if (bmdma) {
 		pci_set_master(pdev);
 		rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
 	} else
+#endif
 		rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index a72ab0d..2a472c5 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -52,7 +52,7 @@
 	}
 
 	ret = of_irq_to_resource(dn, 0, &irq_res);
-	if (ret == NO_IRQ)
+	if (!ret)
 		irq_res.start = irq_res.end = 0;
 	else
 		irq_res.flags = 0;
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 447d9c0..95ec435 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -104,7 +104,7 @@
 };
 
 MODULE_AUTHOR("Uwe Koziolek");
-MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
+MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 82c86545..d8b3d89 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -22,6 +22,7 @@
 #include <linux/kallsyms.h>
 #include <linux/mutex.h>
 #include <linux/async.h>
+#include <linux/pm_runtime.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -1742,6 +1743,8 @@
 		 */
 		list_del_init(&dev->kobj.entry);
 		spin_unlock(&devices_kset->list_lock);
+		/* Disable all device's runtime power management */
+		pm_runtime_disable(dev);
 
 		if (dev->bus && dev->bus->shutdown) {
 			dev_dbg(dev, "shutdown\n");
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 793f796..5693ece 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -127,12 +127,13 @@
 		       nid, K(node_page_state(nid, NR_WRITEBACK)),
 		       nid, K(node_page_state(nid, NR_FILE_PAGES)),
 		       nid, K(node_page_state(nid, NR_FILE_MAPPED)),
-		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 			+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR
+			HPAGE_PMD_NR),
+#else
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)),
 #endif
-		       ),
 		       nid, K(node_page_state(nid, NR_SHMEM)),
 		       nid, node_page_state(nid, NR_KERNEL_STACK) *
 				THREAD_SIZE / 1024,
@@ -143,13 +144,14 @@
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
 				node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
-		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 			, nid,
 			K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR)
+			HPAGE_PMD_NR));
+#else
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
 #endif
-		       );
 	n += hugetlb_report_node_meminfo(nid, buf + n);
 	return n;
 }
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 5f0f85d..428e55e 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -229,7 +229,8 @@
 
 	list_for_each_entry_reverse(ce, &psd->clock_list, node) {
 		if (ce->status < PCE_STATUS_ERROR) {
-			clk_disable(ce->clk);
+			if (ce->status == PCE_STATUS_ENABLED)
+				clk_disable(ce->clk);
 			ce->status = PCE_STATUS_ACQUIRED;
 		}
 	}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 7fa0984..c3d2dfc 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -920,7 +920,8 @@
  End:
 	if (!error) {
 		dev->power.is_suspended = true;
-		if (dev->power.wakeup_path && dev->parent)
+		if (dev->power.wakeup_path
+		    && dev->parent && !dev->parent->power.ignore_children)
 			dev->parent->power.wakeup_path = true;
 	}
 
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 434a6c0..95706fa 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -669,7 +669,7 @@
 	struct device_opp *dev_opp = find_device_opp(dev);
 
 	if (IS_ERR(dev_opp))
-		return ERR_PTR(PTR_ERR(dev_opp)); /* matching type */
+		return ERR_CAST(dev_opp); /* matching type */
 
 	return &dev_opp->head;
 }
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index 30a94ea..86de6c5 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -212,11 +212,9 @@
 	if (!dev || !req) /*guard against callers passing in null */
 		return -EINVAL;
 
-	if (dev_pm_qos_request_active(req)) {
-		WARN(1, KERN_ERR "dev_pm_qos_add_request() called for already "
-			"added request\n");
+	if (WARN(dev_pm_qos_request_active(req),
+		 "%s() called for already added request\n", __func__))
 		return -EINVAL;
-	}
 
 	req->dev = dev;
 
@@ -271,11 +269,9 @@
 	if (!req) /*guard against callers passing in null */
 		return -EINVAL;
 
-	if (!dev_pm_qos_request_active(req)) {
-		WARN(1, KERN_ERR "dev_pm_qos_update_request() called for "
-			"unknown object\n");
+	if (WARN(!dev_pm_qos_request_active(req),
+		 "%s() called for unknown object\n", __func__))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev_pm_qos_mtx);
 
@@ -312,11 +308,9 @@
 	if (!req) /*guard against callers passing in null */
 		return -EINVAL;
 
-	if (!dev_pm_qos_request_active(req)) {
-		WARN(1, KERN_ERR "dev_pm_qos_remove_request() called for "
-			"unknown object\n");
+	if (WARN(!dev_pm_qos_request_active(req),
+		 "%s() called for unknown object\n", __func__))
 		return -EINVAL;
-	}
 
 	mutex_lock(&dev_pm_qos_mtx);
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 486f94e..8004ac3 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -4319,6 +4320,10 @@
 		dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
 		return -ENODEV;
 	}
+
+	pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+				PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
 	err = pci_enable_device(h->pdev);
 	if (err) {
 		dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
@@ -5158,6 +5163,7 @@
 	h->cciss_max_sectors = 8192;
 
 	rebuild_lun_table(h, 1, 0);
+	cciss_engage_scsi(h);
 	h->busy_initializing = 0;
 	return 1;
 
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 951a4e3..e820b68 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -1720,5 +1720,6 @@
 /* If no tape support, then these become defined out of existence */
 
 #define cciss_scsi_setup(cntl_num)
+#define cciss_engage_scsi(h)
 
 #endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 3d80682..68b205a 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -161,17 +161,19 @@
 	&xor_funcs
 };
 
-static loff_t get_loop_size(struct loop_device *lo, struct file *file)
+static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
 {
-	loff_t size, offset, loopsize;
+	loff_t size, loopsize;
 
 	/* Compute loopsize in bytes */
 	size = i_size_read(file->f_mapping->host);
-	offset = lo->lo_offset;
 	loopsize = size - offset;
-	if (lo->lo_sizelimit > 0 && lo->lo_sizelimit < loopsize)
-		loopsize = lo->lo_sizelimit;
+	/* offset is beyond i_size, wierd but possible */
+	if (loopsize < 0)
+		return 0;
 
+	if (sizelimit > 0 && sizelimit < loopsize)
+		loopsize = sizelimit;
 	/*
 	 * Unfortunately, if we want to do I/O on the device,
 	 * the number of 512-byte sectors has to fit into a sector_t.
@@ -179,17 +181,25 @@
 	return loopsize >> 9;
 }
 
-static int
-figure_loop_size(struct loop_device *lo)
+static loff_t get_loop_size(struct loop_device *lo, struct file *file)
 {
-	loff_t size = get_loop_size(lo, lo->lo_backing_file);
+	return get_size(lo->lo_offset, lo->lo_sizelimit, file);
+}
+
+static int
+figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
+{
+	loff_t size = get_size(offset, sizelimit, lo->lo_backing_file);
 	sector_t x = (sector_t)size;
 
 	if (unlikely((loff_t)x != size))
 		return -EFBIG;
-
+	if (lo->lo_offset != offset)
+		lo->lo_offset = offset;
+	if (lo->lo_sizelimit != sizelimit)
+		lo->lo_sizelimit = sizelimit;
 	set_capacity(lo->lo_disk, x);
-	return 0;					
+	return 0;
 }
 
 static inline int
@@ -372,7 +382,8 @@
 
 	if (retval < 0)
 		return retval;
-
+	if (retval != bvec->bv_len)
+		return -EIO;
 	return 0;
 }
 
@@ -1058,9 +1069,7 @@
 
 	if (lo->lo_offset != info->lo_offset ||
 	    lo->lo_sizelimit != info->lo_sizelimit) {
-		lo->lo_offset = info->lo_offset;
-		lo->lo_sizelimit = info->lo_sizelimit;
-		if (figure_loop_size(lo))
+		if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit))
 			return -EFBIG;
 	}
 	loop_config_discard(lo);
@@ -1246,7 +1255,7 @@
 	err = -ENXIO;
 	if (unlikely(lo->lo_state != Lo_bound))
 		goto out;
-	err = figure_loop_size(lo);
+	err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
 	if (unlikely(err))
 		goto out;
 	sec = get_capacity(lo->lo_disk);
@@ -1284,13 +1293,19 @@
 			goto out_unlocked;
 		break;
 	case LOOP_SET_STATUS:
-		err = loop_set_status_old(lo, (struct loop_info __user *) arg);
+		err = -EPERM;
+		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+			err = loop_set_status_old(lo,
+					(struct loop_info __user *)arg);
 		break;
 	case LOOP_GET_STATUS:
 		err = loop_get_status_old(lo, (struct loop_info __user *) arg);
 		break;
 	case LOOP_SET_STATUS64:
-		err = loop_set_status64(lo, (struct loop_info64 __user *) arg);
+		err = -EPERM;
+		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN))
+			err = loop_set_status64(lo,
+					(struct loop_info64 __user *) arg);
 		break;
 	case LOOP_GET_STATUS64:
 		err = loop_get_status64(lo, (struct loop_info64 __user *) arg);
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 6b9a200..a79fb4f 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -630,6 +630,7 @@
 		if (dev->status & 0x10)
 			return -ETIME;
 
+	memset(&hdr, 0, sizeof(hdr));
 	hdr.magic = PG_MAGIC;
 	hdr.dlen = dev->dlen;
 	copy = 0;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f9b7260..fe4ebc3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -100,6 +100,9 @@
 	/* Canyon CN-BTU1 with HID interfaces */
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
+	/* Broadcom BCM20702A0 */
+	{ USB_DEVICE(0x413c, 0x8197) },
+
 	{ }	/* Terminating entry */
 };
 
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 66cd0b8..c92424c 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -1186,10 +1186,11 @@
 /* Certain Gen5 chipsets require require idling the GPU before
  * unmapping anything from the GTT when VT-d is enabled.
  */
-extern int intel_iommu_gfx_mapped;
 static inline int needs_idle_maps(void)
 {
+#ifdef CONFIG_INTEL_IOMMU
 	const unsigned short gpu_devid = intel_private.pcidev->device;
+	extern int intel_iommu_gfx_mapped;
 
 	/* Query intel_iommu to see if we need the workaround. Presumably that
 	 * was loaded first.
@@ -1198,7 +1199,7 @@
 	     gpu_devid == PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG) &&
 	     intel_iommu_gfx_mapped)
 		return 1;
-
+#endif
 	return 0;
 }
 
@@ -1236,7 +1237,7 @@
 		intel_private.gtt_bus_addr = reg_addr + gtt_offset;
 	}
 
-	if (needs_idle_maps());
+	if (needs_idle_maps())
 		intel_private.base.do_idle_maps = 1;
 
 	intel_i9xx_setup_flush();
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 63e19ba..6035ab8 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -941,7 +941,7 @@
 		if (!arch_get_random_long(&v))
 			break;
 		
-		memcpy(buf, &v, chunk);
+		memcpy(p, &v, chunk);
 		p += chunk;
 		nbytes -= chunk;
 	}
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index edaa987..f500201 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -109,7 +109,7 @@
 
 static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int res;
+	int i, res;
 
 	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
 
@@ -120,8 +120,8 @@
 			freq_table[3].frequency = 1000000;
 	}
 	pr_info("db8500-cpufreq : Available frequencies:\n");
-	while (freq_table[i].frequency != CPUFREQ_TABLE_END)
-		pr_info("  %d Mhz\n", freq_table[i++].frequency/1000);
+	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
+		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
 
 	/* get policy fields based on the table */
 	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 643b055..8f04910 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -1,36 +1,29 @@
-config ARCH_HAS_DEVFREQ
-	bool
-	depends on ARCH_HAS_OPP
-	help
-	  Denotes that the architecture supports DEVFREQ. If the architecture
-	  supports multiple OPP entries per device and the frequency of the
-	  devices with OPPs may be altered dynamically, the architecture
-	  supports DEVFREQ.
-
 menuconfig PM_DEVFREQ
 	bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
-	depends on PM_OPP && ARCH_HAS_DEVFREQ
 	help
-	  With OPP support, a device may have a list of frequencies and
-	  voltages available. DEVFREQ, a generic DVFS framework can be
-	  registered for a device with OPP support in order to let the
-	  governor provided to DEVFREQ choose an operating frequency
-	  based on the OPP's list and the policy given with DEVFREQ.
+	  A device may have a list of frequencies and voltages available.
+	  devfreq, a generic DVFS framework can be registered for a device
+	  in order to let the governor provided to devfreq choose an
+	  operating frequency based on the device driver's policy.
 
-	  Each device may have its own governor and policy. DEVFREQ can
+	  Each device may have its own governor and policy. Devfreq can
 	  reevaluate the device state periodically and/or based on the
-	  OPP list changes (each frequency/voltage pair in OPP may be
-	  disabled or enabled).
+	  notification to "nb", a notifier block, of devfreq.
 
-	  Like some CPUs with CPUFREQ, a device may have multiple clocks.
+	  Like some CPUs with CPUfreq, a device may have multiple clocks.
 	  However, because the clock frequencies of a single device are
-	  determined by the single device's state, an instance of DEVFREQ
+	  determined by the single device's state, an instance of devfreq
 	  is attached to a single device and returns a "representative"
-	  clock frequency from the OPP of the device, which is also attached
-	  to a device by 1-to-1. The device registering DEVFREQ takes the
-	  responsiblity to "interpret" the frequency listed in OPP and
+	  clock frequency of the device, which is also attached
+	  to a device by 1-to-1. The device registering devfreq takes the
+	  responsiblity to "interpret" the representative frequency and
 	  to set its every clock accordingly with the "target" callback
-	  given to DEVFREQ.
+	  given to devfreq.
+
+	  When OPP is used with the devfreq device, it is recommended to
+	  register devfreq's nb to the OPP's notifier head.  If OPP is
+	  used with the devfreq device, you may use OPP helper
+	  functions defined in devfreq.h.
 
 if PM_DEVFREQ
 
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 5d15b81..59d24e9 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -15,7 +15,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/stat.h>
 #include <linux/opp.h>
 #include <linux/devfreq.h>
 #include <linux/workqueue.h>
@@ -416,10 +418,14 @@
  */
 int devfreq_remove_device(struct devfreq *devfreq)
 {
+	bool central_polling;
+
 	if (!devfreq)
 		return -EINVAL;
 
-	if (!devfreq->governor->no_central_polling) {
+	central_polling = !devfreq->governor->no_central_polling;
+
+	if (central_polling) {
 		mutex_lock(&devfreq_list_lock);
 		while (wait_remove_device == devfreq) {
 			mutex_unlock(&devfreq_list_lock);
@@ -431,7 +437,7 @@
 	mutex_lock(&devfreq->lock);
 	_remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
 
-	if (!devfreq->governor->no_central_polling)
+	if (central_polling)
 		mutex_unlock(&devfreq_list_lock);
 
 	return 0;
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index bcb1126..153980b 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -585,14 +585,12 @@
 }
 
 /**
- *	dmi_name_in_vendors - Check if string is anywhere in the DMI vendor information.
+ *	dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
  *	@str: 	Case sensitive Name
  */
 int dmi_name_in_vendors(const char *str)
 {
-	static int fields[] = { DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_SYS_VENDOR,
-				DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_BOARD_VENDOR,
-				DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_NONE };
+	static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
 	int i;
 	for (i = 0; fields[i] != DMI_NONE; i++) {
 		int f = fields[i];
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0e49d87..0b05629 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -148,13 +148,17 @@
 	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
-#define MOD_REG_BIT(reg, bit_mask, set)	\
-do {	\
-	int l = __raw_readl(base + reg); \
-	if (set) l |= bit_mask; \
-	else l &= ~bit_mask; \
-	__raw_writel(l, base + reg); \
-} while(0)
+static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+	int l = __raw_readl(base + reg);
+
+	if (set) 
+		l |= mask;
+	else
+		l &= ~mask;
+
+	__raw_writel(l, base + reg);
+}
 
 /**
  * _set_gpio_debounce - low level gpio debounce time
@@ -210,28 +214,28 @@
 	u32 gpio_bit = 1 << gpio;
 
 	if (cpu_is_omap44xx()) {
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
+		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_LOW);
+		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_HIGH);
+		_gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_RISING);
+		_gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_FALLING);
 	} else {
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
+		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_LOW);
+		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_HIGH);
+		_gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_RISING);
+		_gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_FALLING);
 	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (cpu_is_omap44xx()) {
-			MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
-				trigger != 0);
+			_gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+				  trigger != 0);
 		} else {
 			/*
 			 * GPIO wakeup request can only be generated on edge
@@ -1086,6 +1090,11 @@
 
 	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
 				    handle_simple_irq);
+	if (!gc) {
+		dev_err(bank->dev, "Memory alloc failed for gc\n");
+		return;
+	}
+
 	ct = gc->chip_types;
 
 	/* NOTE: No ack required, reading IRQ status clears it. */
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 0550dcb..147df8a 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -596,9 +596,6 @@
 
 	/* set platform specific polarity inversion */
 	ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
-	if (ret)
-		goto out;
-	return 0;
 out:
 	return ret;
 }
@@ -640,7 +637,7 @@
 	struct pca953x_platform_data *pdata;
 	struct pca953x_chip *chip;
 	int irq_base=0, invert=0;
-	int ret = 0;
+	int ret;
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -673,10 +670,10 @@
 	pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
 
 	if (chip->chip_type == PCA953X_TYPE)
-		device_pca953x_init(chip, invert);
-	else if (chip->chip_type == PCA957X_TYPE)
-		device_pca957x_init(chip, invert);
+		ret = device_pca953x_init(chip, invert);
 	else
+		ret = device_pca957x_init(chip, invert);
+	if (ret)
 		goto out_failed;
 
 	ret = pca953x_irq_setup(chip, id, irq_base);
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 785127c..1368826 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -9,7 +9,6 @@
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
 	select I2C
 	select I2C_ALGOBIT
-	select SLOW_WORK
 	help
 	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
 	  introduced in XFree86 4.0. If you say Y here, you need to select
@@ -96,6 +95,7 @@
 	select FB_CFB_IMAGEBLIT
 	# i915 depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select BACKLIGHT_LCD_SUPPORT if ACPI
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select VIDEO_OUTPUT_CONTROL if ACPI
 	select INPUT if ACPI
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 9a2e2a1..8323fc3 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1873,6 +1873,10 @@
 	}
 
 	if (num_clips && clips_ptr) {
+		if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) {
+			ret = -EINVAL;
+			goto out_err1;
+		}
 		clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL);
 		if (!clips) {
 			ret = -ENOMEM;
@@ -2118,8 +2122,10 @@
 	property->num_values = num_values;
 	INIT_LIST_HEAD(&property->enum_blob_list);
 
-	if (name)
+	if (name) {
 		strncpy(property->name, name, DRM_PROP_NAME_LEN);
+		property->name[DRM_PROP_NAME_LEN-1] = '\0';
+	}
 
 	list_add_tail(&property->head, &dev->mode_config.property_list);
 	return property;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 2957636..3969f75 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -484,6 +484,7 @@
 	struct drm_connector *save_connectors, *connector;
 	int count = 0, ro, fail = 0;
 	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_mode_set save_set;
 	int ret = 0;
 	int i;
 
@@ -556,6 +557,12 @@
 		save_connectors[count++] = *connector;
 	}
 
+	save_set.crtc = set->crtc;
+	save_set.mode = &set->crtc->mode;
+	save_set.x = set->crtc->x;
+	save_set.y = set->crtc->y;
+	save_set.fb = set->crtc->fb;
+
 	/* We should be able to check here if the fb has the same properties
 	 * and then just flip_or_move it */
 	if (set->crtc->fb != set->fb) {
@@ -721,6 +728,12 @@
 		*connector = save_connectors[count++];
 	}
 
+	/* Try to restore the config */
+	if (mode_changed &&
+	    !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
+				      save_set.y, save_set.fb))
+		DRM_ERROR("failed to restore config after modeset failure\n");
+
 	kfree(save_connectors);
 	kfree(save_encoders);
 	kfree(save_crtcs);
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index d067c12..1c7a1c0 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -118,7 +118,10 @@
 		tmp->minor = minor;
 		tmp->dent = ent;
 		tmp->info_ent = &files[i];
-		list_add(&(tmp->list), &(minor->debugfs_nodes.list));
+
+		mutex_lock(&minor->debugfs_lock);
+		list_add(&tmp->list, &minor->debugfs_list);
+		mutex_unlock(&minor->debugfs_lock);
 	}
 	return 0;
 
@@ -146,7 +149,8 @@
 	char name[64];
 	int ret;
 
-	INIT_LIST_HEAD(&minor->debugfs_nodes.list);
+	INIT_LIST_HEAD(&minor->debugfs_list);
+	mutex_init(&minor->debugfs_lock);
 	sprintf(name, "%d", minor_id);
 	minor->debugfs_root = debugfs_create_dir(name, root);
 	if (!minor->debugfs_root) {
@@ -192,8 +196,9 @@
 	struct drm_info_node *tmp;
 	int i;
 
+	mutex_lock(&minor->debugfs_lock);
 	for (i = 0; i < count; i++) {
-		list_for_each_safe(pos, q, &minor->debugfs_nodes.list) {
+		list_for_each_safe(pos, q, &minor->debugfs_list) {
 			tmp = list_entry(pos, struct drm_info_node, list);
 			if (tmp->info_ent == &files[i]) {
 				debugfs_remove(tmp->dent);
@@ -202,6 +207,7 @@
 			}
 		}
 	}
+	mutex_unlock(&minor->debugfs_lock);
 	return 0;
 }
 EXPORT_SYMBOL(drm_debugfs_remove_files);
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index fc81af9..40c187c 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -125,7 +125,7 @@
 	DRM_IOCTL_DEF(DRM_IOCTL_SG_ALLOC, drm_sg_alloc_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF(DRM_IOCTL_SG_FREE, drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 
-	DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0),
+	DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, DRM_UNLOCKED),
 
 	DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0),
 
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index cb3794a..44a5d0a 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -110,10 +110,7 @@
 	/* Prevent vblank irq processing while disabling vblank irqs,
 	 * so no updates of timestamps or count can happen after we've
 	 * disabled. Needed to prevent races in case of delayed irq's.
-	 * Disable preemption, so vblank_time_lock is held as short as
-	 * possible, even under a kernel with PREEMPT_RT patches.
 	 */
-	preempt_disable();
 	spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
 
 	dev->driver->disable_vblank(dev, crtc);
@@ -164,7 +161,6 @@
 	clear_vblank_timestamps(dev, crtc);
 
 	spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
-	preempt_enable();
 }
 
 static void vblank_disable_fn(unsigned long arg)
@@ -407,13 +403,16 @@
 	/*
 	 * Wake up any waiters so they don't hang.
 	 */
-	spin_lock_irqsave(&dev->vbl_lock, irqflags);
-	for (i = 0; i < dev->num_crtcs; i++) {
-		DRM_WAKEUP(&dev->vbl_queue[i]);
-		dev->vblank_enabled[i] = 0;
-		dev->last_vblank[i] = dev->driver->get_vblank_counter(dev, i);
+	if (dev->num_crtcs) {
+		spin_lock_irqsave(&dev->vbl_lock, irqflags);
+		for (i = 0; i < dev->num_crtcs; i++) {
+			DRM_WAKEUP(&dev->vbl_queue[i]);
+			dev->vblank_enabled[i] = 0;
+			dev->last_vblank[i] =
+				dev->driver->get_vblank_counter(dev, i);
+		}
+		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 	}
-	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 
 	if (!irq_enabled)
 		return -EINVAL;
@@ -886,10 +885,6 @@
 	spin_lock_irqsave(&dev->vbl_lock, irqflags);
 	/* Going from 0->1 means we have to enable interrupts again */
 	if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1) {
-		/* Disable preemption while holding vblank_time_lock. Do
-		 * it explicitely to guard against PREEMPT_RT kernel.
-		 */
-		preempt_disable();
 		spin_lock_irqsave(&dev->vblank_time_lock, irqflags2);
 		if (!dev->vblank_enabled[crtc]) {
 			/* Enable vblank irqs under vblank_time_lock protection.
@@ -909,7 +904,6 @@
 			}
 		}
 		spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags2);
-		preempt_enable();
 	} else {
 		if (!dev->vblank_enabled[crtc]) {
 			atomic_dec(&dev->vblank_refcount[crtc]);
@@ -1125,6 +1119,7 @@
 		trace_drm_vblank_event_delivered(current->pid, pipe,
 						 vblwait->request.sequence);
 	} else {
+		/* drm_handle_vblank_events will call drm_vblank_put */
 		list_add_tail(&e->base.link, &dev->vblank_event_list);
 		vblwait->reply.sequence = vblwait->request.sequence;
 	}
@@ -1205,8 +1200,12 @@
 		goto done;
 	}
 
-	if (flags & _DRM_VBLANK_EVENT)
+	if (flags & _DRM_VBLANK_EVENT) {
+		/* must hold on to the vblank ref until the event fires
+		 * drm_vblank_put will be called asynchronously
+		 */
 		return drm_queue_vblank_event(dev, crtc, vblwait, file_priv);
+	}
 
 	if ((flags & _DRM_VBLANK_NEXTONMISS) &&
 	    (seq - vblwait->request.sequence) <= (1<<23)) {
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index d14b44e..d09a6e0 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -636,11 +636,16 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
+	int ret;
 
 	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
 	if (ring->size == 0)
 		return 0;
 
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	seq_printf(m, "Ring %s:\n", ring->name);
 	seq_printf(m, "  Head :    %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR);
 	seq_printf(m, "  Tail :    %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR);
@@ -654,6 +659,8 @@
 	seq_printf(m, "  Control : %08x\n", I915_READ_CTL(ring));
 	seq_printf(m, "  Start :   %08x\n", I915_READ_START(ring));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -842,7 +849,16 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	u16 crstanddelay = I915_READ16(CRSTANDVID);
+	u16 crstanddelay;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	crstanddelay = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
 
 	seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f));
 
@@ -940,7 +956,11 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 delayfreq;
-	int i;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < 16; i++) {
 		delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
@@ -948,6 +968,8 @@
 			   (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT);
 	}
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -962,13 +984,19 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 inttoext;
-	int i;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	for (i = 1; i <= 32; i++) {
 		inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4);
 		seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext);
 	}
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -977,9 +1005,19 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	u32 rgvmodectl = I915_READ(MEMMODECTL);
-	u32 rstdbyctl = I915_READ(RSTDBYCTL);
-	u16 crstandvid = I915_READ16(CRSTANDVID);
+	u32 rgvmodectl, rstdbyctl;
+	u16 crstandvid;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	rgvmodectl = I915_READ(MEMMODECTL);
+	rstdbyctl = I915_READ(RSTDBYCTL);
+	crstandvid = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
 
 	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
 		   "yes" : "no");
@@ -1167,9 +1205,16 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4));
 
+	mutex_unlock(&dev->struct_mutex);
+
 	return 0;
 }
 
@@ -1506,7 +1551,10 @@
 	node->minor = minor;
 	node->dent = ent;
 	node->info_ent = (void *) key;
-	list_add(&node->list, &minor->debugfs_nodes.list);
+
+	mutex_lock(&minor->debugfs_lock);
+	list_add(&node->list, &minor->debugfs_list);
+	mutex_unlock(&minor->debugfs_lock);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index cc531bb..15bfa91 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -68,7 +68,7 @@
 MODULE_PARM_DESC(i915_enable_rc6,
 		"Enable power-saving render C-state 6 (default: true)");
 
-unsigned int i915_enable_fbc __read_mostly = -1;
+int i915_enable_fbc __read_mostly = -1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
 		"Enable frame buffer compression for power savings "
@@ -80,7 +80,7 @@
 		"Use panel (LVDS/eDP) downclocking for power savings "
 		"(default: false)");
 
-unsigned int i915_panel_use_ssc __read_mostly = -1;
+int i915_panel_use_ssc __read_mostly = -1;
 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
 		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
@@ -107,7 +107,7 @@
 extern int intel_agp_enabled;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
-	.class = PCI_CLASS_DISPLAY_VGA << 8,	\
+	.class = PCI_BASE_CLASS_DISPLAY << 16,	\
 	.class_mask = 0xff0000,			\
 	.vendor = 0x8086,			\
 	.device = id,				\
@@ -789,8 +789,8 @@
 };
 
 static struct drm_driver driver = {
-	/* don't use mtrr's here, the Xserver or user space app should
-	 * deal with them for intel hardware.
+	/* Don't use MTRRs here; the Xserver or userspace app should
+	 * deal with them for Intel hardware.
 	 */
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 06a37f4..4a9c1b9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -126,6 +126,9 @@
 	struct _drm_i915_sarea *sarea_priv;
 };
 #define I915_FENCE_REG_NONE -1
+#define I915_MAX_NUM_FENCES 16
+/* 16 fences + sign bit for FENCE_REG_NONE */
+#define I915_MAX_NUM_FENCE_BITS 5
 
 struct drm_i915_fence_reg {
 	struct list_head lru_list;
@@ -168,7 +171,7 @@
 	u32 instdone1;
 	u32 seqno;
 	u64 bbaddr;
-	u64 fence[16];
+	u64 fence[I915_MAX_NUM_FENCES];
 	struct timeval time;
 	struct drm_i915_error_object {
 		int page_count;
@@ -182,7 +185,7 @@
 		u32 gtt_offset;
 		u32 read_domains;
 		u32 write_domain;
-		s32 fence_reg:5;
+		s32 fence_reg:I915_MAX_NUM_FENCE_BITS;
 		s32 pinned:2;
 		u32 tiling:2;
 		u32 dirty:1;
@@ -375,7 +378,7 @@
 	struct notifier_block lid_notifier;
 
 	int crt_ddc_pin;
-	struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
+	struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
 
@@ -506,7 +509,7 @@
 	u8 saveAR[21];
 	u8 saveDACMASK;
 	u8 saveCR[37];
-	uint64_t saveFENCE[16];
+	uint64_t saveFENCE[I915_MAX_NUM_FENCES];
 	u32 saveCURACNTR;
 	u32 saveCURAPOS;
 	u32 saveCURABASE;
@@ -777,10 +780,8 @@
 	 * Fence register bits (if any) for this object.  Will be set
 	 * as needed when mapped into the GTT.
 	 * Protected by dev->struct_mutex.
-	 *
-	 * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE)
 	 */
-	signed int fence_reg:5;
+	signed int fence_reg:I915_MAX_NUM_FENCE_BITS;
 
 	/**
 	 * Advice: are the backing pages purgeable?
@@ -999,10 +1000,10 @@
 extern unsigned int i915_powersave __read_mostly;
 extern unsigned int i915_semaphores __read_mostly;
 extern unsigned int i915_lvds_downclock __read_mostly;
-extern unsigned int i915_panel_use_ssc __read_mostly;
+extern int i915_panel_use_ssc __read_mostly;
 extern int i915_vbt_sdvo_panel_type __read_mostly;
 extern unsigned int i915_enable_rc6 __read_mostly;
-extern unsigned int i915_enable_fbc __read_mostly;
+extern int i915_enable_fbc __read_mostly;
 extern bool i915_enable_hangcheck __read_mostly;
 
 extern int i915_suspend(struct drm_device *dev, pm_message_t state);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6651c36..8359dc7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1396,7 +1396,7 @@
 
 	if (obj->base.size > dev_priv->mm.gtt_mappable_end) {
 		ret = -E2BIG;
-		goto unlock;
+		goto out;
 	}
 
 	if (obj->madv != I915_MADV_WILLNEED) {
@@ -1745,7 +1745,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int i;
 
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < dev_priv->num_fence_regs; i++) {
 		struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
 		struct drm_i915_gem_object *obj = reg->obj;
 
@@ -3512,9 +3512,11 @@
 			 * so emit a request to do so.
 			 */
 			request = kzalloc(sizeof(*request), GFP_KERNEL);
-			if (request)
+			if (request) {
 				ret = i915_add_request(obj->ring, NULL, request);
-			else
+				if (ret)
+					kfree(request);
+			} else
 				ret = -ENOMEM;
 		}
 
@@ -3613,7 +3615,7 @@
 	obj->base.write_domain = I915_GEM_DOMAIN_CPU;
 	obj->base.read_domains = I915_GEM_DOMAIN_CPU;
 
-	if (IS_GEN6(dev)) {
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
 		/* On Gen6, we can have the GPU use the LLC (the CPU
 		 * cache) for about a 10% performance improvement
 		 * compared to uncached.  Graphics requests other than
@@ -3877,7 +3879,7 @@
 	INIT_LIST_HEAD(&dev_priv->mm.gtt_list);
 	for (i = 0; i < I915_NUM_RINGS; i++)
 		init_ring_lists(&dev_priv->ring[i]);
-	for (i = 0; i < 16; i++)
+	for (i = 0; i < I915_MAX_NUM_FENCES; i++)
 		INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
 	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
 			  i915_gem_retire_work_handler);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9ee2729..b40004b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -824,6 +824,7 @@
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		for (i = 0; i < 16; i++)
 			error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5a09416..b080cc8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1553,12 +1553,21 @@
  */
 #define   PP_READY		(1 << 30)
 #define   PP_SEQUENCE_NONE	(0 << 28)
-#define   PP_SEQUENCE_ON	(1 << 28)
-#define   PP_SEQUENCE_OFF	(2 << 28)
-#define   PP_SEQUENCE_MASK	0x30000000
+#define   PP_SEQUENCE_POWER_UP	(1 << 28)
+#define   PP_SEQUENCE_POWER_DOWN (2 << 28)
+#define   PP_SEQUENCE_MASK	(3 << 28)
+#define   PP_SEQUENCE_SHIFT	28
 #define   PP_CYCLE_DELAY_ACTIVE	(1 << 27)
-#define   PP_SEQUENCE_STATE_ON_IDLE (1 << 3)
 #define   PP_SEQUENCE_STATE_MASK 0x0000000f
+#define   PP_SEQUENCE_STATE_OFF_IDLE	(0x0 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_1	(0x1 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_2	(0x2 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_3	(0x3 << 0)
+#define   PP_SEQUENCE_STATE_ON_IDLE	(0x8 << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_0	(0x9 << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_2	(0xa << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_3	(0xb << 0)
+#define   PP_SEQUENCE_STATE_RESET	(0xf << 0)
 #define PP_CONTROL	0x61204
 #define   POWER_TARGET_ON	(1 << 0)
 #define PP_ON_DELAYS	0x61208
@@ -3444,6 +3453,10 @@
 #define  GT_FIFO_FREE_ENTRIES			0x120008
 #define    GT_FIFO_NUM_RESERVED_ENTRIES		20
 
+#define GEN6_UCGCTL2				0x9404
+# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1 << 12)
+# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
+
 #define GEN6_RPNSWREQ				0xA008
 #define   GEN6_TURBO_DISABLE			(1<<31)
 #define   GEN6_FREQUENCY(x)			((x)<<25)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index f8f602d..7886e4f 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -370,6 +370,7 @@
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		for (i = 0; i < 16; i++)
 			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
@@ -404,6 +405,7 @@
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 7:
 	case 6:
 		for (i = 0; i < 16; i++)
 			I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 981b1f1..e77a863 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2933,7 +2933,8 @@
 
 	/* For PCH DP, enable TRANS_DP_CTL */
 	if (HAS_PCH_CPT(dev) &&
-	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
 		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
@@ -4711,7 +4712,7 @@
 				lvds_bpc = 6;
 
 			if (lvds_bpc < display_bpc) {
-				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
 				display_bpc = lvds_bpc;
 			}
 			continue;
@@ -4722,7 +4723,7 @@
 			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
 
 			if (edp_bpc < display_bpc) {
-				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
 				display_bpc = edp_bpc;
 			}
 			continue;
@@ -4737,7 +4738,7 @@
 			/* Don't use an invalid EDID bpc value */
 			if (connector->display_info.bpc &&
 			    connector->display_info.bpc < display_bpc) {
-				DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
 				display_bpc = connector->display_info.bpc;
 			}
 		}
@@ -4748,10 +4749,10 @@
 		 */
 		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
 			if (display_bpc > 8 && display_bpc < 12) {
-				DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n");
+				DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
 				display_bpc = 12;
 			} else {
-				DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n");
+				DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
 				display_bpc = 8;
 			}
 		}
@@ -4789,8 +4790,8 @@
 
 	display_bpc = min(display_bpc, bpc);
 
-	DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
-			 bpc, display_bpc);
+	DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
+		      bpc, display_bpc);
 
 	*pipe_bpp = display_bpc * 3;
 
@@ -5671,7 +5672,7 @@
 	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
 	if ((is_lvds && dev_priv->lvds_dither) || dither) {
 		pipeconf |= PIPECONF_DITHER_EN;
-		pipeconf |= PIPECONF_DITHER_TYPE_ST1;
+		pipeconf |= PIPECONF_DITHER_TYPE_SP;
 	}
 	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
@@ -8148,6 +8149,20 @@
 	I915_WRITE(WM2_LP_ILK, 0);
 	I915_WRITE(WM1_LP_ILK, 0);
 
+	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+	 * gating disable must be set.  Failure to set it results in
+	 * flickering pixels due to Z write ordering failures after
+	 * some amount of runtime in the Mesa "fire" demo, and Unigine
+	 * Sanctuary and Tropics, and apparently anything else with
+	 * alpha test or pixel discard.
+	 *
+	 * According to the spec, bit 11 (RCCUNIT) must also be set,
+	 * but we didn't debug actual testcases to find it out.
+	 */
+	I915_WRITE(GEN6_UCGCTL2,
+		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
 	/*
 	 * According to the spec the following bits should be
 	 * set in order to enable memory self-refresh and fbc:
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 09b318b..4d0358f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -59,7 +59,6 @@
 	struct i2c_algo_dp_aux_data algo;
 	bool is_pch_edp;
 	uint8_t	train_set[4];
-	uint8_t link_status[DP_LINK_STATUS_SIZE];
 	int panel_power_up_delay;
 	int panel_power_down_delay;
 	int panel_power_cycle_delay;
@@ -68,7 +67,6 @@
 	struct drm_display_mode *panel_fixed_mode;  /* for eDP */
 	struct delayed_work panel_vdd_work;
 	bool want_panel_vdd;
-	unsigned long panel_off_jiffies;
 };
 
 /**
@@ -157,16 +155,12 @@
 static int
 intel_dp_max_lane_count(struct intel_dp *intel_dp)
 {
-	int max_lane_count = 4;
-
-	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
-		max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
-		switch (max_lane_count) {
-		case 1: case 2: case 4:
-			break;
-		default:
-			max_lane_count = 4;
-		}
+	int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
+	switch (max_lane_count) {
+	case 1: case 2: case 4:
+		break;
+	default:
+		max_lane_count = 4;
 	}
 	return max_lane_count;
 }
@@ -768,12 +762,11 @@
 			continue;
 
 		intel_dp = enc_to_intel_dp(encoder);
-		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) {
+		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+		    intel_dp->base.type == INTEL_OUTPUT_EDP)
+		{
 			lane_count = intel_dp->lane_count;
 			break;
-		} else if (is_edp(intel_dp)) {
-			lane_count = dev_priv->edp.lanes;
-			break;
 		}
 	}
 
@@ -810,6 +803,7 @@
 		  struct drm_display_mode *adjusted_mode)
 {
 	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct drm_crtc *crtc = intel_dp->base.base.crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -822,18 +816,31 @@
 			ironlake_edp_pll_off(encoder);
 	}
 
-	intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
-	intel_dp->DP |= intel_dp->color_range;
+	/*
+	 * There are three kinds of DP registers:
+	 *
+	 * 	IBX PCH
+	 * 	CPU
+	 * 	CPT PCH
+	 *
+	 * IBX PCH and CPU are the same for almost everything,
+	 * except that the CPU DP PLL is configured in this
+	 * register
+	 *
+	 * CPT PCH is quite different, having many bits moved
+	 * to the TRANS_DP_CTL register instead. That
+	 * configuration happens (oddly) in ironlake_pch_enable
+	 */
 
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-		intel_dp->DP |= DP_SYNC_HS_HIGH;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-		intel_dp->DP |= DP_SYNC_VS_HIGH;
+	/* Preserve the BIOS-computed detected bit. This is
+	 * supposed to be read-only.
+	 */
+	intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
+	intel_dp->DP |=  DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 
-	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
-		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
-	else
-		intel_dp->DP |= DP_LINK_TRAIN_OFF;
+	/* Handle DP bits in common between all three register formats */
+
+	intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 
 	switch (intel_dp->lane_count) {
 	case 1:
@@ -852,59 +859,106 @@
 		intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
 		intel_write_eld(encoder, adjusted_mode);
 	}
-
 	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
 	intel_dp->link_configuration[0] = intel_dp->link_bw;
 	intel_dp->link_configuration[1] = intel_dp->lane_count;
 	intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
-
 	/*
 	 * Check for DPCD version > 1.1 and enhanced framing support
 	 */
 	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
 	    (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
 		intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-		intel_dp->DP |= DP_ENHANCED_FRAMING;
 	}
 
-	/* CPT DP's pipe select is decided in TRANS_DP_CTL */
-	if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
-		intel_dp->DP |= DP_PIPEB_SELECT;
+	/* Split out the IBX/CPU vs CPT settings */
 
-	if (is_cpu_edp(intel_dp)) {
-		/* don't miss out required setting for eDP */
-		intel_dp->DP |= DP_PLL_ENABLE;
-		if (adjusted_mode->clock < 200000)
-			intel_dp->DP |= DP_PLL_FREQ_160MHZ;
-		else
-			intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+	if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+		intel_dp->DP |= intel_dp->color_range;
+
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+			intel_dp->DP |= DP_SYNC_HS_HIGH;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+			intel_dp->DP |= DP_SYNC_VS_HIGH;
+		intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+		if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+			intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+		if (intel_crtc->pipe == 1)
+			intel_dp->DP |= DP_PIPEB_SELECT;
+
+		if (is_cpu_edp(intel_dp)) {
+			/* don't miss out required setting for eDP */
+			intel_dp->DP |= DP_PLL_ENABLE;
+			if (adjusted_mode->clock < 200000)
+				intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+			else
+				intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+		}
+	} else {
+		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
 	}
 }
 
+#define IDLE_ON_MASK		(PP_ON | 0 	  | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
+#define IDLE_ON_VALUE   	(PP_ON | 0 	  | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_ON_IDLE)
+
+#define IDLE_OFF_MASK		(PP_ON | 0        | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
+#define IDLE_OFF_VALUE		(0     | 0        | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_OFF_IDLE)
+
+#define IDLE_CYCLE_MASK		(PP_ON | 0        | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
+#define IDLE_CYCLE_VALUE	(0     | 0        | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_OFF_IDLE)
+
+static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
+				       u32 mask,
+				       u32 value)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
+		      mask, value,
+		      I915_READ(PCH_PP_STATUS),
+		      I915_READ(PCH_PP_CONTROL));
+
+	if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) {
+		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
+			  I915_READ(PCH_PP_STATUS),
+			  I915_READ(PCH_PP_CONTROL));
+	}
+}
+
+static void ironlake_wait_panel_on(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power on\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
+}
+
 static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
 {
-	unsigned long	off_time;
-	unsigned long	delay;
-
 	DRM_DEBUG_KMS("Wait for panel power off time\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
+}
 
-	if (ironlake_edp_have_panel_power(intel_dp) ||
-	    ironlake_edp_have_panel_vdd(intel_dp))
-	{
-		DRM_DEBUG_KMS("Panel still on, no delay needed\n");
-		return;
-	}
+static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power cycle\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
+}
 
-	off_time = intel_dp->panel_off_jiffies + msecs_to_jiffies(intel_dp->panel_power_down_delay);
-	if (time_after(jiffies, off_time)) {
-		DRM_DEBUG_KMS("Time already passed");
-		return;
-	}
-	delay = jiffies_to_msecs(off_time - jiffies);
-	if (delay > intel_dp->panel_power_down_delay)
-		delay = intel_dp->panel_power_down_delay;
-	DRM_DEBUG_KMS("Waiting an additional %ld ms\n", delay);
-	msleep(delay);
+
+/* Read the current pp_control value, unlocking the register if it
+ * is locked
+ */
+
+static  u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv)
+{
+	u32	control = I915_READ(PCH_PP_CONTROL);
+
+	control &= ~PANEL_UNLOCK_MASK;
+	control |= PANEL_UNLOCK_REGS;
+	return control;
 }
 
 static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
@@ -921,15 +975,16 @@
 	     "eDP VDD already requested on\n");
 
 	intel_dp->want_panel_vdd = true;
+
 	if (ironlake_edp_have_panel_vdd(intel_dp)) {
 		DRM_DEBUG_KMS("eDP VDD already on\n");
 		return;
 	}
 
-	ironlake_wait_panel_off(intel_dp);
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	if (!ironlake_edp_have_panel_power(intel_dp))
+		ironlake_wait_panel_power_cycle(intel_dp);
+
+	pp = ironlake_get_pp_control(dev_priv);
 	pp |= EDP_FORCE_VDD;
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
@@ -952,9 +1007,7 @@
 	u32 pp;
 
 	if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
-		pp = I915_READ(PCH_PP_CONTROL);
-		pp &= ~PANEL_UNLOCK_MASK;
-		pp |= PANEL_UNLOCK_REGS;
+		pp = ironlake_get_pp_control(dev_priv);
 		pp &= ~EDP_FORCE_VDD;
 		I915_WRITE(PCH_PP_CONTROL, pp);
 		POSTING_READ(PCH_PP_CONTROL);
@@ -962,7 +1015,8 @@
 		/* Make sure sequencer is idle before allowing subsequent activity */
 		DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
 			      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
-		intel_dp->panel_off_jiffies = jiffies;
+
+		msleep(intel_dp->panel_power_down_delay);
 	}
 }
 
@@ -972,9 +1026,9 @@
 						 struct intel_dp, panel_vdd_work);
 	struct drm_device *dev = intel_dp->base.base.dev;
 
-	mutex_lock(&dev->struct_mutex);
+	mutex_lock(&dev->mode_config.mutex);
 	ironlake_panel_vdd_off_sync(intel_dp);
-	mutex_unlock(&dev->struct_mutex);
+	mutex_unlock(&dev->mode_config.mutex);
 }
 
 static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
@@ -984,7 +1038,7 @@
 
 	DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd);
 	WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
-	
+
 	intel_dp->want_panel_vdd = false;
 
 	if (sync) {
@@ -1000,23 +1054,25 @@
 	}
 }
 
-/* Returns true if the panel was already on when called */
 static void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE;
+	u32 pp;
 
 	if (!is_edp(intel_dp))
 		return;
-	if (ironlake_edp_have_panel_power(intel_dp))
+
+	DRM_DEBUG_KMS("Turn eDP power on\n");
+
+	if (ironlake_edp_have_panel_power(intel_dp)) {
+		DRM_DEBUG_KMS("eDP power already on\n");
 		return;
+	}
 
-	ironlake_wait_panel_off(intel_dp);
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	ironlake_wait_panel_power_cycle(intel_dp);
 
+	pp = ironlake_get_pp_control(dev_priv);
 	if (IS_GEN5(dev)) {
 		/* ILK workaround: disable reset around power sequence */
 		pp &= ~PANEL_POWER_RESET;
@@ -1025,13 +1081,13 @@
 	}
 
 	pp |= POWER_TARGET_ON;
+	if (!IS_GEN5(dev))
+		pp |= PANEL_POWER_RESET;
+
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
 
-	if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask,
-		     5000))
-		DRM_ERROR("panel on wait timed out: 0x%08x\n",
-			  I915_READ(PCH_PP_STATUS));
+	ironlake_wait_panel_on(intel_dp);
 
 	if (IS_GEN5(dev)) {
 		pp |= PANEL_POWER_RESET; /* restore panel reset bit */
@@ -1040,46 +1096,25 @@
 	}
 }
 
-static void ironlake_edp_panel_off(struct drm_encoder *encoder)
+static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = intel_dp->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK |
-		PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK;
+	u32 pp;
 
 	if (!is_edp(intel_dp))
 		return;
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
 
-	if (IS_GEN5(dev)) {
-		/* ILK workaround: disable reset around power sequence */
-		pp &= ~PANEL_POWER_RESET;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-	}
+	DRM_DEBUG_KMS("Turn eDP power off\n");
 
-	intel_dp->panel_off_jiffies = jiffies;
+	WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n");
 
-	if (IS_GEN5(dev)) {
-		pp &= ~POWER_TARGET_ON;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-		pp &= ~POWER_TARGET_ON;
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-		msleep(intel_dp->panel_power_cycle_delay);
+	pp = ironlake_get_pp_control(dev_priv);
+	pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
 
-		if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000))
-			DRM_ERROR("panel off wait timed out: 0x%08x\n",
-				  I915_READ(PCH_PP_STATUS));
-
-		pp |= PANEL_POWER_RESET; /* restore panel reset bit */
-		I915_WRITE(PCH_PP_CONTROL, pp);
-		POSTING_READ(PCH_PP_CONTROL);
-	}
+	ironlake_wait_panel_off(intel_dp);
 }
 
 static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
@@ -1099,9 +1134,7 @@
 	 * allowing it to appear.
 	 */
 	msleep(intel_dp->backlight_on_delay);
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	pp = ironlake_get_pp_control(dev_priv);
 	pp |= EDP_BLC_ENABLE;
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
@@ -1117,9 +1150,7 @@
 		return;
 
 	DRM_DEBUG_KMS("\n");
-	pp = I915_READ(PCH_PP_CONTROL);
-	pp &= ~PANEL_UNLOCK_MASK;
-	pp |= PANEL_UNLOCK_REGS;
+	pp = ironlake_get_pp_control(dev_priv);
 	pp &= ~EDP_BLC_ENABLE;
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
@@ -1187,17 +1218,18 @@
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
+	ironlake_edp_backlight_off(intel_dp);
+	ironlake_edp_panel_off(intel_dp);
+
 	/* Wake up the sink first */
 	ironlake_edp_panel_vdd_on(intel_dp);
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_link_down(intel_dp);
 	ironlake_edp_panel_vdd_off(intel_dp, false);
 
 	/* Make sure the panel is off before trying to
 	 * change the mode
 	 */
-	ironlake_edp_backlight_off(intel_dp);
-	intel_dp_link_down(intel_dp);
-	ironlake_edp_panel_off(encoder);
 }
 
 static void intel_dp_commit(struct drm_encoder *encoder)
@@ -1211,7 +1243,6 @@
 	intel_dp_start_link_train(intel_dp);
 	ironlake_edp_panel_on(intel_dp);
 	ironlake_edp_panel_vdd_off(intel_dp, true);
-
 	intel_dp_complete_link_train(intel_dp);
 	ironlake_edp_backlight_on(intel_dp);
 
@@ -1230,16 +1261,20 @@
 	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		ironlake_edp_backlight_off(intel_dp);
+		ironlake_edp_panel_off(intel_dp);
+
 		ironlake_edp_panel_vdd_on(intel_dp);
-		if (is_edp(intel_dp))
-			ironlake_edp_backlight_off(intel_dp);
 		intel_dp_sink_dpms(intel_dp, mode);
 		intel_dp_link_down(intel_dp);
-		ironlake_edp_panel_off(encoder);
-		if (is_edp(intel_dp) && !is_pch_edp(intel_dp))
-			ironlake_edp_pll_off(encoder);
 		ironlake_edp_panel_vdd_off(intel_dp, false);
+
+		if (is_cpu_edp(intel_dp))
+			ironlake_edp_pll_off(encoder);
 	} else {
+		if (is_cpu_edp(intel_dp))
+			ironlake_edp_pll_on(encoder);
+
 		ironlake_edp_panel_vdd_on(intel_dp);
 		intel_dp_sink_dpms(intel_dp, mode);
 		if (!(dp_reg & DP_PORT_EN)) {
@@ -1247,7 +1282,6 @@
 			ironlake_edp_panel_on(intel_dp);
 			ironlake_edp_panel_vdd_off(intel_dp, true);
 			intel_dp_complete_link_train(intel_dp);
-			ironlake_edp_backlight_on(intel_dp);
 		} else
 			ironlake_edp_panel_vdd_off(intel_dp, false);
 		ironlake_edp_backlight_on(intel_dp);
@@ -1285,11 +1319,11 @@
  * link status information
  */
 static bool
-intel_dp_get_link_status(struct intel_dp *intel_dp)
+intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
 	return intel_dp_aux_native_read_retry(intel_dp,
 					      DP_LANE0_1_STATUS,
-					      intel_dp->link_status,
+					      link_status,
 					      DP_LINK_STATUS_SIZE);
 }
 
@@ -1301,27 +1335,25 @@
 }
 
 static uint8_t
-intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+intel_get_adjust_request_voltage(uint8_t adjust_request[2],
 				 int lane)
 {
-	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
 	int	    s = ((lane & 1) ?
 			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
 			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
-	uint8_t l = intel_dp_link_status(link_status, i);
+	uint8_t l = adjust_request[lane>>1];
 
 	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
 }
 
 static uint8_t
-intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2],
 				      int lane)
 {
-	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
 	int	    s = ((lane & 1) ?
 			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
 			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
-	uint8_t l = intel_dp_link_status(link_status, i);
+	uint8_t l = adjust_request[lane>>1];
 
 	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
 }
@@ -1344,6 +1376,7 @@
  * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
  */
 #define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
+#define I830_DP_VOLTAGE_MAX_CPT	    DP_TRAIN_VOLTAGE_SWING_1200
 
 static uint8_t
 intel_dp_pre_emphasis_max(uint8_t voltage_swing)
@@ -1362,15 +1395,18 @@
 }
 
 static void
-intel_get_adjust_train(struct intel_dp *intel_dp)
+intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
+	struct drm_device *dev = intel_dp->base.base.dev;
 	uint8_t v = 0;
 	uint8_t p = 0;
 	int lane;
+	uint8_t	*adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS);
+	int voltage_max;
 
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
-		uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane);
-		uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane);
+		uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane);
+		uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane);
 
 		if (this_v > v)
 			v = this_v;
@@ -1378,8 +1414,12 @@
 			p = this_p;
 	}
 
-	if (v >= I830_DP_VOLTAGE_MAX)
-		v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		voltage_max = I830_DP_VOLTAGE_MAX_CPT;
+	else
+		voltage_max = I830_DP_VOLTAGE_MAX;
+	if (v >= voltage_max)
+		v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
 
 	if (p >= intel_dp_pre_emphasis_max(v))
 		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
@@ -1389,7 +1429,7 @@
 }
 
 static uint32_t
-intel_dp_signal_levels(uint8_t train_set, int lane_count)
+intel_dp_signal_levels(uint8_t train_set)
 {
 	uint32_t	signal_levels = 0;
 
@@ -1458,9 +1498,8 @@
 intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
 		      int lane)
 {
-	int i = DP_LANE0_1_STATUS + (lane >> 1);
 	int s = (lane & 1) * 4;
-	uint8_t l = intel_dp_link_status(link_status, i);
+	uint8_t l = link_status[lane>>1];
 
 	return (l >> s) & 0xf;
 }
@@ -1485,18 +1524,18 @@
 			 DP_LANE_CHANNEL_EQ_DONE|\
 			 DP_LANE_SYMBOL_LOCKED)
 static bool
-intel_channel_eq_ok(struct intel_dp *intel_dp)
+intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
 	uint8_t lane_align;
 	uint8_t lane_status;
 	int lane;
 
-	lane_align = intel_dp_link_status(intel_dp->link_status,
+	lane_align = intel_dp_link_status(link_status,
 					  DP_LANE_ALIGN_STATUS_UPDATED);
 	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
 		return false;
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
-		lane_status = intel_get_lane_status(intel_dp->link_status, lane);
+		lane_status = intel_get_lane_status(link_status, lane);
 		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
 			return false;
 	}
@@ -1521,8 +1560,9 @@
 
 	ret = intel_dp_aux_native_write(intel_dp,
 					DP_TRAINING_LANE0_SET,
-					intel_dp->train_set, 4);
-	if (ret != 4)
+					intel_dp->train_set,
+					intel_dp->lane_count);
+	if (ret != intel_dp->lane_count)
 		return false;
 
 	return true;
@@ -1538,7 +1578,7 @@
 	int i;
 	uint8_t voltage;
 	bool clock_recovery = false;
-	int tries;
+	int voltage_tries, loop_tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
 
@@ -1565,16 +1605,20 @@
 		DP &= ~DP_LINK_TRAIN_MASK;
 	memset(intel_dp->train_set, 0, 4);
 	voltage = 0xff;
-	tries = 0;
+	voltage_tries = 0;
+	loop_tries = 0;
 	clock_recovery = false;
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
+		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 		uint32_t    signal_levels;
-		if (IS_GEN6(dev) && is_edp(intel_dp)) {
+
+		if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
+			DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels);
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
@@ -1590,10 +1634,13 @@
 		/* Set training pattern 1 */
 
 		udelay(100);
-		if (!intel_dp_get_link_status(intel_dp))
+		if (!intel_dp_get_link_status(intel_dp, link_status)) {
+			DRM_ERROR("failed to get link status\n");
 			break;
+		}
 
-		if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+		if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+			DRM_DEBUG_KMS("clock recovery OK\n");
 			clock_recovery = true;
 			break;
 		}
@@ -1602,20 +1649,30 @@
 		for (i = 0; i < intel_dp->lane_count; i++)
 			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
 				break;
-		if (i == intel_dp->lane_count)
-			break;
+		if (i == intel_dp->lane_count) {
+			++loop_tries;
+			if (loop_tries == 5) {
+				DRM_DEBUG_KMS("too many full retries, give up\n");
+				break;
+			}
+			memset(intel_dp->train_set, 0, 4);
+			voltage_tries = 0;
+			continue;
+		}
 
 		/* Check to see if we've tried the same voltage 5 times */
 		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
-			++tries;
-			if (tries == 5)
+			++voltage_tries;
+			if (voltage_tries == 5) {
+				DRM_DEBUG_KMS("too many voltage retries, give up\n");
 				break;
+			}
 		} else
-			tries = 0;
+			voltage_tries = 0;
 		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 
 		/* Compute new intel_dp->train_set as requested by target */
-		intel_get_adjust_train(intel_dp);
+		intel_get_adjust_train(intel_dp, link_status);
 	}
 
 	intel_dp->DP = DP;
@@ -1638,6 +1695,7 @@
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint32_t    signal_levels;
+		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 
 		if (cr_tries > 5) {
 			DRM_ERROR("failed to train DP, aborting\n");
@@ -1645,11 +1703,11 @@
 			break;
 		}
 
-		if (IS_GEN6(dev) && is_edp(intel_dp)) {
+		if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
@@ -1665,17 +1723,17 @@
 			break;
 
 		udelay(400);
-		if (!intel_dp_get_link_status(intel_dp))
+		if (!intel_dp_get_link_status(intel_dp, link_status))
 			break;
 
 		/* Make sure clock is still ok */
-		if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+		if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
 			intel_dp_start_link_train(intel_dp);
 			cr_tries++;
 			continue;
 		}
 
-		if (intel_channel_eq_ok(intel_dp)) {
+		if (intel_channel_eq_ok(intel_dp, link_status)) {
 			channel_eq = true;
 			break;
 		}
@@ -1690,7 +1748,7 @@
 		}
 
 		/* Compute new intel_dp->train_set as requested by target */
-		intel_get_adjust_train(intel_dp);
+		intel_get_adjust_train(intel_dp, link_status);
 		++tries;
 	}
 
@@ -1735,8 +1793,12 @@
 
 	msleep(17);
 
-	if (is_edp(intel_dp))
-		DP |= DP_LINK_TRAIN_OFF;
+	if (is_edp(intel_dp)) {
+		if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+			DP |= DP_LINK_TRAIN_OFF_CPT;
+		else
+			DP |= DP_LINK_TRAIN_OFF;
+	}
 
 	if (!HAS_PCH_CPT(dev) &&
 	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -1822,6 +1884,7 @@
 intel_dp_check_link_status(struct intel_dp *intel_dp)
 {
 	u8 sink_irq_vector;
+	u8 link_status[DP_LINK_STATUS_SIZE];
 
 	if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON)
 		return;
@@ -1830,7 +1893,7 @@
 		return;
 
 	/* Try to read receiver status if the link appears to be up */
-	if (!intel_dp_get_link_status(intel_dp)) {
+	if (!intel_dp_get_link_status(intel_dp, link_status)) {
 		intel_dp_link_down(intel_dp);
 		return;
 	}
@@ -1855,7 +1918,7 @@
 			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
 	}
 
-	if (!intel_channel_eq_ok(intel_dp)) {
+	if (!intel_channel_eq_ok(intel_dp, link_status)) {
 		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
 			      drm_get_encoder_name(&intel_dp->base.base));
 		intel_dp_start_link_train(intel_dp);
@@ -2179,7 +2242,8 @@
 			continue;
 
 		intel_dp = enc_to_intel_dp(encoder);
-		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT)
+		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+		    intel_dp->base.type == INTEL_OUTPUT_EDP)
 			return intel_dp->output_reg;
 	}
 
@@ -2321,7 +2385,7 @@
 
 		cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
 			PANEL_LIGHT_ON_DELAY_SHIFT;
-		
+
 		cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
 			PANEL_LIGHT_OFF_DELAY_SHIFT;
 
@@ -2354,11 +2418,10 @@
 		DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
 			      intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
 
-		intel_dp->panel_off_jiffies = jiffies - intel_dp->panel_power_down_delay;
-
 		ironlake_edp_panel_vdd_on(intel_dp);
 		ret = intel_dp_get_dpcd(intel_dp);
 		ironlake_edp_panel_vdd_off(intel_dp, false);
+
 		if (ret) {
 			if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
 				dev_priv->no_aux_handshake =
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 499d4c0..21f60b7 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -326,7 +326,8 @@
 static int intel_panel_get_brightness(struct backlight_device *bd)
 {
 	struct drm_device *dev = bl_get_data(bd);
-	return intel_panel_get_backlight(dev);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->backlight_level;
 }
 
 static const struct backlight_ops intel_panel_bl_ops = {
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 032a820..5fc201b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -640,10 +640,9 @@
 nv50_pll_set(struct drm_device *dev, uint32_t reg, uint32_t clk)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	uint32_t reg0 = nv_rd32(dev, reg + 0);
-	uint32_t reg1 = nv_rd32(dev, reg + 4);
 	struct nouveau_pll_vals pll;
 	struct pll_lims pll_limits;
+	u32 ctrl, mask, coef;
 	int ret;
 
 	ret = get_pll_limits(dev, reg, &pll_limits);
@@ -654,15 +653,20 @@
 	if (!clk)
 		return -ERANGE;
 
-	reg0 = (reg0 & 0xfff8ffff) | (pll.log2P << 16);
-	reg1 = (reg1 & 0xffff0000) | (pll.N1 << 8) | pll.M1;
-
-	if (dev_priv->vbios.execute) {
-		still_alive();
-		nv_wr32(dev, reg + 4, reg1);
-		nv_wr32(dev, reg + 0, reg0);
+	coef = pll.N1 << 8 | pll.M1;
+	ctrl = pll.log2P << 16;
+	mask = 0x00070000;
+	if (reg == 0x004008) {
+		mask |= 0x01f80000;
+		ctrl |= (pll_limits.log2p_bias << 19);
+		ctrl |= (pll.log2P << 22);
 	}
 
+	if (!dev_priv->vbios.execute)
+		return 0;
+
+	nv_mask(dev, reg + 0, mask, ctrl);
+	nv_wr32(dev, reg + 4, coef);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 7226f41..7cc37e6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -148,7 +148,7 @@
 
 	if (dev_priv->card_type == NV_10 &&
 	    nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) &&
-	    nvbo->bo.mem.num_pages < vram_pages / 2) {
+	    nvbo->bo.mem.num_pages < vram_pages / 4) {
 		/*
 		 * Make sure that the color and depth buffers are handled
 		 * by independent memory controller units. Up to a 9x
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index a319d564..bb6ec9e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -158,6 +158,7 @@
 	INIT_LIST_HEAD(&chan->nvsw.vbl_wait);
 	INIT_LIST_HEAD(&chan->nvsw.flip);
 	INIT_LIST_HEAD(&chan->fence.pending);
+	spin_lock_init(&chan->fence.lock);
 
 	/* setup channel's memory and vm */
 	ret = nouveau_gpuobj_channel_init(chan, vram_handle, gart_handle);
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index e0d275e..cea6696 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -710,7 +710,7 @@
 	case OUTPUT_DP:
 		max_clock  = nv_encoder->dp.link_nr;
 		max_clock *= nv_encoder->dp.link_bw;
-		clock = clock * nouveau_connector_bpp(connector) / 8;
+		clock = clock * nouveau_connector_bpp(connector) / 10;
 		break;
 	default:
 		BUG_ON(1);
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 14a8627..3a4cc32 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -487,6 +487,7 @@
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_fbdev *nfbdev;
+	int preferred_bpp;
 	int ret;
 
 	nfbdev = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
@@ -505,7 +506,15 @@
 	}
 
 	drm_fb_helper_single_add_all_connectors(&nfbdev->helper);
-	drm_fb_helper_initial_config(&nfbdev->helper, 32);
+
+	if (dev_priv->vram_size <= 32 * 1024 * 1024)
+		preferred_bpp = 8;
+	else if (dev_priv->vram_size <= 64 * 1024 * 1024)
+		preferred_bpp = 16;
+	else
+		preferred_bpp = 32;
+
+	drm_fb_helper_initial_config(&nfbdev->helper, preferred_bpp);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index 81116cf..2f6daae 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -539,8 +539,6 @@
 			return ret;
 	}
 
-	INIT_LIST_HEAD(&chan->fence.pending);
-	spin_lock_init(&chan->fence.lock);
 	atomic_set(&chan->fence.last_sequence_irq, 0);
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c
index c6143df..d39b220 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.c
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c
@@ -333,7 +333,7 @@
 
 	NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index);
 
-	for (i = 0; info[i].addr; i++) {
+	for (i = 0; i2c && info[i].addr; i++) {
 		if (nouveau_probe_i2c_addr(i2c, info[i].addr) &&
 		    (!match || match(i2c, &info[i]))) {
 			NV_INFO(dev, "Detected %s: %s\n", what, info[i].type);
diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c
index 9f178aa..33d03fb 100644
--- a/drivers/gpu/drm/nouveau/nouveau_perf.c
+++ b/drivers/gpu/drm/nouveau/nouveau_perf.c
@@ -239,7 +239,7 @@
 	if(version == 0x15) {
 		memtimings->timing =
 				kcalloc(entries, sizeof(*memtimings->timing), GFP_KERNEL);
-		if(!memtimings) {
+		if (!memtimings->timing) {
 			NV_WARN(dev,"Could not allocate memtiming table\n");
 			return;
 		}
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 82478e0..d8831ab 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -579,6 +579,14 @@
 	if (ret)
 		goto out_display_early;
 
+	/* workaround an odd issue on nvc1 by disabling the device's
+	 * nosnoop capability.  hopefully won't cause issues until a
+	 * better fix is found - assuming there is one...
+	 */
+	if (dev_priv->chipset == 0xc1) {
+		nv_mask(dev, 0x00088080, 0x00000800, 0x00000000);
+	}
+
 	nouveau_pm_init(dev);
 
 	ret = engine->vram.init(dev);
@@ -1102,12 +1110,13 @@
 	dev_priv->noaccel = !!nouveau_noaccel;
 	if (nouveau_noaccel == -1) {
 		switch (dev_priv->chipset) {
-		case 0xc1: /* known broken */
-		case 0xc8: /* never tested */
+#if 0
+		case 0xXX: /* known broken */
 			NV_INFO(dev, "acceleration disabled by default, pass "
 				     "noaccel=0 to force enable\n");
 			dev_priv->noaccel = true;
 			break;
+#endif
 		default:
 			dev_priv->noaccel = false;
 			break;
diff --git a/drivers/gpu/drm/nouveau/nv40_pm.c b/drivers/gpu/drm/nouveau/nv40_pm.c
index bbc0b9c..e676b0d 100644
--- a/drivers/gpu/drm/nouveau/nv40_pm.c
+++ b/drivers/gpu/drm/nouveau/nv40_pm.c
@@ -57,12 +57,14 @@
 	int P = (ctrl & 0x00070000) >> 16;
 	u32 ref = 27000, clk = 0;
 
-	if (ctrl & 0x80000000)
+	if ((ctrl & 0x80000000) && M1) {
 		clk = ref * N1 / M1;
-
-	if (!(ctrl & 0x00000100)) {
-		if (ctrl & 0x40000000)
-			clk = clk * N2 / M2;
+		if ((ctrl & 0x40000100) == 0x40000000) {
+			if (M2)
+				clk = clk * N2 / M2;
+			else
+				clk = 0;
+		}
 	}
 
 	return clk >> P;
@@ -177,6 +179,11 @@
 	}
 
 	/* memory clock */
+	if (!perflvl->memory) {
+		info->mpll_ctrl = 0x00000000;
+		goto out;
+	}
+
 	ret = nv40_calc_pll(dev, 0x004020, &pll, perflvl->memory,
 			    &N1, &M1, &N2, &M2, &log2P);
 	if (ret < 0)
@@ -264,6 +271,9 @@
 	mdelay(5);
 	nv_mask(dev, 0x00c040, 0x00000333, info->ctrl);
 
+	if (!info->mpll_ctrl)
+		goto resume;
+
 	/* wait for vblank start on active crtcs, disable memory access */
 	for (i = 0; i < 2; i++) {
 		if (!(crtc_mask & (1 << i)))
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index 8c979b3..ac601f7 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -131,8 +131,8 @@
 	NV_DEBUG(dev, "\n");
 
 	/* master reset */
-	nv_mask(dev, 0x000200, 0x00200100, 0x00000000);
-	nv_mask(dev, 0x000200, 0x00200100, 0x00200100);
+	nv_mask(dev, 0x000200, 0x00201000, 0x00000000);
+	nv_mask(dev, 0x000200, 0x00201000, 0x00201000);
 	nv_wr32(dev, 0x40008c, 0x00000004); /* HW_CTX_SWITCH_ENABLED */
 
 	/* reset/enable traps and interrupts */
diff --git a/drivers/gpu/drm/nouveau/nv50_grctx.c b/drivers/gpu/drm/nouveau/nv50_grctx.c
index d05c2c3..4b46d69 100644
--- a/drivers/gpu/drm/nouveau/nv50_grctx.c
+++ b/drivers/gpu/drm/nouveau/nv50_grctx.c
@@ -601,7 +601,7 @@
 					gr_def(ctx, offset + 0x1c, 0x00880000);
 					break;
 				case 0x86:
-					gr_def(ctx, offset + 0x1c, 0x008c0000);
+					gr_def(ctx, offset + 0x1c, 0x018c0000);
 					break;
 				case 0x92:
 				case 0x96:
diff --git a/drivers/gpu/drm/nouveau/nv50_vram.c b/drivers/gpu/drm/nouveau/nv50_vram.c
index 9da2383..2e45e57 100644
--- a/drivers/gpu/drm/nouveau/nv50_vram.c
+++ b/drivers/gpu/drm/nouveau/nv50_vram.c
@@ -160,7 +160,7 @@
 	colbits  =  (r4 & 0x0000f000) >> 12;
 	rowbitsa = ((r4 & 0x000f0000) >> 16) + 8;
 	rowbitsb = ((r4 & 0x00f00000) >> 20) + 8;
-	banks    = ((r4 & 0x01000000) ? 8 : 4);
+	banks    = 1 << (((r4 & 0x03000000) >> 24) + 2);
 
 	rowsize = parts * banks * (1 << colbits) * 8;
 	predicted = rowsize << rowbitsa;
diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c
index bbdbc51..a74e501 100644
--- a/drivers/gpu/drm/nouveau/nvc0_graph.c
+++ b/drivers/gpu/drm/nouveau/nvc0_graph.c
@@ -157,8 +157,8 @@
 	struct nvc0_graph_priv *priv = nv_engine(chan->dev, NVOBJ_ENGINE_GR);
 	struct nvc0_graph_chan *grch = chan->engctx[NVOBJ_ENGINE_GR];
 	struct drm_device *dev = chan->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	int i = 0, gpc, tp, ret;
-	u32 magic;
 
 	ret = nouveau_gpuobj_new(dev, chan, 0x2000, 256, NVOBJ_FLAG_VM,
 				 &grch->unk408004);
@@ -207,14 +207,37 @@
 	nv_wo32(grch->mmio, i++ * 4, 0x0041880c);
 	nv_wo32(grch->mmio, i++ * 4, 0x80000018);
 
-	magic = 0x02180000;
-	nv_wo32(grch->mmio, i++ * 4, 0x00405830);
-	nv_wo32(grch->mmio, i++ * 4, magic);
-	for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
-		for (tp = 0; tp < priv->tp_nr[gpc]; tp++, magic += 0x0324) {
-			u32 reg = 0x504520 + (gpc * 0x8000) + (tp * 0x0800);
-			nv_wo32(grch->mmio, i++ * 4, reg);
-			nv_wo32(grch->mmio, i++ * 4, magic);
+	if (dev_priv->chipset != 0xc1) {
+		u32 magic = 0x02180000;
+		nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+		nv_wo32(grch->mmio, i++ * 4, magic);
+		for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+			for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+				u32 reg = TP_UNIT(gpc, tp, 0x520);
+				nv_wo32(grch->mmio, i++ * 4, reg);
+				nv_wo32(grch->mmio, i++ * 4, magic);
+				magic += 0x0324;
+			}
+		}
+	} else {
+		u32 magic = 0x02180000;
+		nv_wo32(grch->mmio, i++ * 4, 0x00405830);
+		nv_wo32(grch->mmio, i++ * 4, magic | 0x0000218);
+		nv_wo32(grch->mmio, i++ * 4, 0x004064c4);
+		nv_wo32(grch->mmio, i++ * 4, 0x0086ffff);
+		for (gpc = 0; gpc < priv->gpc_nr; gpc++) {
+			for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+				u32 reg = TP_UNIT(gpc, tp, 0x520);
+				nv_wo32(grch->mmio, i++ * 4, reg);
+				nv_wo32(grch->mmio, i++ * 4, (1 << 28) | magic);
+				magic += 0x0324;
+			}
+			for (tp = 0; tp < priv->tp_nr[gpc]; tp++) {
+				u32 reg = TP_UNIT(gpc, tp, 0x544);
+				nv_wo32(grch->mmio, i++ * 4, reg);
+				nv_wo32(grch->mmio, i++ * 4, magic);
+				magic += 0x0324;
+			}
 		}
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c
index dd0e6a7..96b0b93 100644
--- a/drivers/gpu/drm/nouveau/nvc0_grctx.c
+++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c
@@ -1812,6 +1812,7 @@
 		/* calculate first set of magics */
 		memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
 
+		gpc = -1;
 		for (tp = 0; tp < priv->tp_total; tp++) {
 			do {
 				gpc = (gpc + 1) % priv->gpc_nr;
@@ -1861,30 +1862,26 @@
 
 	if (1) {
 		u32 tp_mask = 0, tp_set = 0;
-		u8  tpnr[GPC_MAX];
+		u8  tpnr[GPC_MAX], a, b;
 
 		memcpy(tpnr, priv->tp_nr, sizeof(priv->tp_nr));
 		for (gpc = 0; gpc < priv->gpc_nr; gpc++)
 			tp_mask |= ((1 << priv->tp_nr[gpc]) - 1) << (gpc * 8);
 
-		gpc = -1;
-		for (i = 0, gpc = -1; i < 32; i++) {
-			int ltp = i * (priv->tp_total - 1) / 32;
+		for (i = 0, gpc = -1, b = -1; i < 32; i++) {
+			a = (i * (priv->tp_total - 1)) / 32;
+			if (a != b) {
+				b = a;
+				do {
+					gpc = (gpc + 1) % priv->gpc_nr;
+				} while (!tpnr[gpc]);
+				tp = priv->tp_nr[gpc] - tpnr[gpc]--;
 
-			do {
-				gpc = (gpc + 1) % priv->gpc_nr;
-			} while (!tpnr[gpc]);
-			tp = priv->tp_nr[gpc] - tpnr[gpc]--;
+				tp_set |= 1 << ((gpc * 8) + tp);
+			}
 
-			tp_set |= 1 << ((gpc * 8) + tp);
-
-			do {
-				nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
-				tp_set ^= tp_mask;
-				nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set);
-				tp_set ^= tp_mask;
-			} while (ltp == (++i * (priv->tp_total - 1) / 32));
-			i--;
+			nv_wr32(dev, 0x406800 + (i * 0x20), tp_set);
+			nv_wr32(dev, 0x406c00 + (i * 0x20), tp_set ^ tp_mask);
 		}
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nvc0_vram.c b/drivers/gpu/drm/nouveau/nvc0_vram.c
index edbfe93..ce984d5 100644
--- a/drivers/gpu/drm/nouveau/nvc0_vram.c
+++ b/drivers/gpu/drm/nouveau/nvc0_vram.c
@@ -43,7 +43,7 @@
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	0, 0, 0, 3, 3, 3, 3, 1, 1, 1, 1, 0, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3,
-	3, 3, 3, 3, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
+	3, 3, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3,
 	3, 3, 0, 0, 0, 0, 0, 0, 3, 0, 0, 3, 0, 3, 0, 3,
 	3, 0, 3, 3, 3, 3, 3, 0, 0, 3, 0, 3, 0, 3, 3, 0,
 	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 0, 1, 1, 0
@@ -110,22 +110,26 @@
 	u32 bsize = nv_rd32(dev, 0x10f20c);
 	u32 offset, length;
 	bool uniform = true;
-	int ret, i;
+	int ret, part;
 
 	NV_DEBUG(dev, "0x100800: 0x%08x\n", nv_rd32(dev, 0x100800));
 	NV_DEBUG(dev, "parts 0x%08x bcast_mem_amount 0x%08x\n", parts, bsize);
 
 	/* read amount of vram attached to each memory controller */
-	for (i = 0; i < parts; i++) {
-		u32 psize = nv_rd32(dev, 0x11020c + (i * 0x1000));
+	part = 0;
+	while (parts) {
+		u32 psize = nv_rd32(dev, 0x11020c + (part++ * 0x1000));
+		if (psize == 0)
+			continue;
+		parts--;
+
 		if (psize != bsize) {
 			if (psize < bsize)
 				bsize = psize;
 			uniform = false;
 		}
 
-		NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", i, psize);
-
+		NV_DEBUG(dev, "%d: mem_amount 0x%08x\n", part, psize);
 		dev_priv->vram_size += (u64)psize << 20;
 	}
 
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 87921c8..87631fe 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1522,12 +1522,6 @@
 				     struct drm_display_mode *mode,
 				     struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = crtc->dev;
-	struct radeon_device *rdev = dev->dev_private;
-
-	/* adjust pm to upcoming mode change */
-	radeon_pm_compute_clocks(rdev);
-
 	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
 		return false;
 	return true;
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index a0de485..6fb335a 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -283,7 +283,7 @@
 		}
 	}
 
-	DRM_ERROR("aux i2c too many retries, giving up\n");
+	DRM_DEBUG_KMS("aux i2c too many retries, giving up\n");
 	return -EREMOTEIO;
 }
 
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index e4c384b..1d603a3 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -157,6 +157,57 @@
 	return actual_temp * 1000;
 }
 
+void sumo_pm_init_profile(struct radeon_device *rdev)
+{
+	int idx;
+
+	/* default */
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_ps_idx = rdev->pm.default_power_state_index;
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 0;
+
+	/* low,mid sh/mh */
+	if (rdev->flags & RADEON_IS_MOBILITY)
+		idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+	else
+		idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
+
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
+
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 0;
+
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 0;
+
+	/* high sh/mh */
+	idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx =
+		rdev->pm.power_state[idx].num_clock_modes - 1;
+
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
+	rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx =
+		rdev->pm.power_state[idx].num_clock_modes - 1;
+}
+
 void evergreen_pm_misc(struct radeon_device *rdev)
 {
 	int req_ps_idx = rdev->pm.requested_power_state_index;
@@ -1219,7 +1270,7 @@
 		WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
 			rdev->mc.vram_end >> 12);
 	}
-	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
+	WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, rdev->vram_scratch.gpu_addr >> 12);
 	if (rdev->flags & RADEON_IS_IGP) {
 		tmp = RREG32(MC_FUS_VM_FB_OFFSET) & 0x000FFFFF;
 		tmp |= ((rdev->mc.vram_end >> 20) & 0xF) << 24;
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 7fdfa8e..38e1bda 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -480,21 +480,23 @@
 		}
 		break;
 	case DB_Z_INFO:
-		r = evergreen_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			dev_warn(p->dev, "bad SET_CONTEXT_REG "
-					"0x%04X\n", reg);
-			return -EINVAL;
-		}
 		track->db_z_info = radeon_get_ib_value(p, idx);
-		ib[idx] &= ~Z_ARRAY_MODE(0xf);
-		track->db_z_info &= ~Z_ARRAY_MODE(0xf);
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
-			ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-			track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-		} else {
-			ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
-			track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		if (!p->keep_tiling_flags) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+						"0x%04X\n", reg);
+				return -EINVAL;
+			}
+			ib[idx] &= ~Z_ARRAY_MODE(0xf);
+			track->db_z_info &= ~Z_ARRAY_MODE(0xf);
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+				ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+				track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+			} else {
+				ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+			}
 		}
 		break;
 	case DB_STENCIL_INFO:
@@ -607,40 +609,44 @@
 	case CB_COLOR5_INFO:
 	case CB_COLOR6_INFO:
 	case CB_COLOR7_INFO:
-		r = evergreen_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			dev_warn(p->dev, "bad SET_CONTEXT_REG "
-					"0x%04X\n", reg);
-			return -EINVAL;
-		}
 		tmp = (reg - CB_COLOR0_INFO) / 0x3c;
 		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-		} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		if (!p->keep_tiling_flags) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+						"0x%04X\n", reg);
+				return -EINVAL;
+			}
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+				ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+				track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+			} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+				ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+			}
 		}
 		break;
 	case CB_COLOR8_INFO:
 	case CB_COLOR9_INFO:
 	case CB_COLOR10_INFO:
 	case CB_COLOR11_INFO:
-		r = evergreen_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			dev_warn(p->dev, "bad SET_CONTEXT_REG "
-					"0x%04X\n", reg);
-			return -EINVAL;
-		}
 		tmp = ((reg - CB_COLOR8_INFO) / 0x1c) + 8;
 		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-		} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
-			ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
-			track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+		if (!p->keep_tiling_flags) {
+			r = evergreen_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+						"0x%04X\n", reg);
+				return -EINVAL;
+			}
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+				ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+				track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+			} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+				ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+			}
 		}
 		break;
 	case CB_COLOR0_PITCH:
@@ -1311,10 +1317,12 @@
 					return -EINVAL;
 				}
 				ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
-				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
-				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-					ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				if (!p->keep_tiling_flags) {
+					if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+						ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
+					else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+						ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1);
+				}
 				texture = reloc->robj;
 				/* tex mip base */
 				r = evergreen_cs_packet_next_reloc(p, &reloc);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 400b26d..c93bc64 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -701,16 +701,21 @@
 			return r;
 		}
 
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-			tile_flags |= R300_TXO_MACRO_TILE;
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-			tile_flags |= R300_TXO_MICRO_TILE;
-		else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
-			tile_flags |= R300_TXO_MICRO_TILE_SQUARE;
+		if (p->keep_tiling_flags) {
+			ib[idx] = (idx_value & 31) | /* keep the 1st 5 bits */
+				  ((idx_value & ~31) + (u32)reloc->lobj.gpu_offset);
+		} else {
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= R300_TXO_MACRO_TILE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= R300_TXO_MICRO_TILE;
+			else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
+				tile_flags |= R300_TXO_MICRO_TILE_SQUARE;
 
-		tmp = idx_value + ((u32)reloc->lobj.gpu_offset);
-		tmp |= tile_flags;
-		ib[idx] = tmp;
+			tmp = idx_value + ((u32)reloc->lobj.gpu_offset);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
+		}
 		track->textures[i].robj = reloc->robj;
 		track->tex_dirty = true;
 		break;
@@ -760,24 +765,26 @@
 		/* RB3D_COLORPITCH1 */
 		/* RB3D_COLORPITCH2 */
 		/* RB3D_COLORPITCH3 */
-		r = r100_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
-				  idx, reg);
-			r100_cs_dump_packet(p, pkt);
-			return r;
+		if (!p->keep_tiling_flags) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= R300_COLOR_TILE_ENABLE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+			else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
+				tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE;
+
+			tmp = idx_value & ~(0x7 << 16);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
 		}
-
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-			tile_flags |= R300_COLOR_TILE_ENABLE;
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
-		else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
-			tile_flags |= R300_COLOR_MICROTILE_SQUARE_ENABLE;
-
-		tmp = idx_value & ~(0x7 << 16);
-		tmp |= tile_flags;
-		ib[idx] = tmp;
 		i = (reg - 0x4E38) >> 2;
 		track->cb[i].pitch = idx_value & 0x3FFE;
 		switch (((idx_value >> 21) & 0xF)) {
@@ -843,25 +850,26 @@
 		break;
 	case 0x4F24:
 		/* ZB_DEPTHPITCH */
-		r = r100_cs_packet_next_reloc(p, &reloc);
-		if (r) {
-			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
-				  idx, reg);
-			r100_cs_dump_packet(p, pkt);
-			return r;
+		if (!p->keep_tiling_flags) {
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= R300_DEPTHMICROTILE_TILED;
+			else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
+				tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE;
+
+			tmp = idx_value & ~(0x7 << 16);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
 		}
-
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-			tile_flags |= R300_DEPTHMACROTILE_ENABLE;
-		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-			tile_flags |= R300_DEPTHMICROTILE_TILED;
-		else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO_SQUARE)
-			tile_flags |= R300_DEPTHMICROTILE_TILED_SQUARE;
-
-		tmp = idx_value & ~(0x7 << 16);
-		tmp |= tile_flags;
-		ib[idx] = tmp;
-
 		track->zb.pitch = idx_value & 0x3FFC;
 		track->zb_dirty = true;
 		break;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 19afc43..9cdda0b 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -288,24 +288,6 @@
 		  pcie_lanes);
 }
 
-static int r600_pm_get_type_index(struct radeon_device *rdev,
-				  enum radeon_pm_state_type ps_type,
-				  int instance)
-{
-	int i;
-	int found_instance = -1;
-
-	for (i = 0; i < rdev->pm.num_power_states; i++) {
-		if (rdev->pm.power_state[i].type == ps_type) {
-			found_instance++;
-			if (found_instance == instance)
-				return i;
-		}
-	}
-	/* return default if no match */
-	return rdev->pm.default_power_state_index;
-}
-
 void rs780_pm_init_profile(struct radeon_device *rdev)
 {
 	if (rdev->pm.num_power_states == 2) {
@@ -421,6 +403,8 @@
 
 void r600_pm_init_profile(struct radeon_device *rdev)
 {
+	int idx;
+
 	if (rdev->family == CHIP_R600) {
 		/* XXX */
 		/* default */
@@ -502,81 +486,43 @@
 			rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_off_cm_idx = 0;
 			rdev->pm.profiles[PM_PROFILE_DEFAULT_IDX].dpms_on_cm_idx = 2;
 			/* low sh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
-			}
+			if (rdev->flags & RADEON_IS_MOBILITY)
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
+			else
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_LOW_SH_IDX].dpms_on_cm_idx = 0;
 			/* mid sh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
-			}
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_SH_IDX].dpms_on_cm_idx = 1;
 			/* high sh */
-			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
-			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+			idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
+			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = idx;
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
 			rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2;
 			/* low mh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
-			}
+			if (rdev->flags & RADEON_IS_MOBILITY)
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
+			else
+				idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_LOW_MH_IDX].dpms_on_cm_idx = 0;
 			/* mid mh */
-			if (rdev->flags & RADEON_IS_MOBILITY) {
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_BATTERY, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
-			} else {
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx =
-					r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
-				rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
-			}
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_off_cm_idx = 0;
+			rdev->pm.profiles[PM_PROFILE_MID_MH_IDX].dpms_on_cm_idx = 1;
 			/* high mh */
-			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
-			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx =
-				r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+			idx = radeon_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
+			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = idx;
+			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = idx;
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
 			rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2;
 		}
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 0a2e023..cb1acff 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -941,7 +941,8 @@
 		track->db_depth_control = radeon_get_ib_value(p, idx);
 		break;
 	case R_028010_DB_DEPTH_INFO:
-		if (r600_cs_packet_next_is_pkt3_nop(p)) {
+		if (!p->keep_tiling_flags &&
+		    r600_cs_packet_next_is_pkt3_nop(p)) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				dev_warn(p->dev, "bad SET_CONTEXT_REG "
@@ -992,7 +993,8 @@
 	case R_0280B4_CB_COLOR5_INFO:
 	case R_0280B8_CB_COLOR6_INFO:
 	case R_0280BC_CB_COLOR7_INFO:
-		if (r600_cs_packet_next_is_pkt3_nop(p)) {
+		if (!p->keep_tiling_flags &&
+		     r600_cs_packet_next_is_pkt3_nop(p)) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
@@ -1291,10 +1293,12 @@
 	mip_offset <<= 8;
 
 	word0 = radeon_get_ib_value(p, idx + 0);
-	if (tiling_flags & RADEON_TILING_MACRO)
-		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
-	else if (tiling_flags & RADEON_TILING_MICRO)
-		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+	if (!p->keep_tiling_flags) {
+		if (tiling_flags & RADEON_TILING_MACRO)
+			word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
+		else if (tiling_flags & RADEON_TILING_MICRO)
+			word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+	}
 	word1 = radeon_get_ib_value(p, idx + 1);
 	w0 = G_038000_TEX_WIDTH(word0) + 1;
 	h0 = G_038004_TEX_HEIGHT(word1) + 1;
@@ -1621,10 +1625,12 @@
 					return -EINVAL;
 				}
 				base_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
-				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
-					ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
-				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
-					ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+				if (!p->keep_tiling_flags) {
+					if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+						ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
+					else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+						ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
+				}
 				texture = reloc->robj;
 				/* tex mip base */
 				r = r600_cs_packet_next_reloc(p, &reloc);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index b316b30..8227e76 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -611,7 +611,8 @@
 	struct radeon_ib	*ib;
 	void			*track;
 	unsigned		family;
-	int parser_error;
+	int			parser_error;
+	bool			keep_tiling_flags;
 };
 
 extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
@@ -784,8 +785,7 @@
 
 struct radeon_power_state {
 	enum radeon_pm_state_type type;
-	/* XXX: use a define for num clock modes */
-	struct radeon_pm_clock_info clock_info[8];
+	struct radeon_pm_clock_info *clock_info;
 	/* number of valid clock modes in this power state */
 	int num_clock_modes;
 	struct radeon_pm_clock_info *default_clock_mode;
@@ -855,6 +855,9 @@
 	struct device	        *int_hwmon_dev;
 };
 
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+			     enum radeon_pm_state_type ps_type,
+			     int instance);
 
 /*
  * Benchmarking
@@ -1142,6 +1145,48 @@
 	u64				gpu_addr;
 };
 
+
+/*
+ * Mutex which allows recursive locking from the same process.
+ */
+struct radeon_mutex {
+	struct mutex		mutex;
+	struct task_struct	*owner;
+	int			level;
+};
+
+static inline void radeon_mutex_init(struct radeon_mutex *mutex)
+{
+	mutex_init(&mutex->mutex);
+	mutex->owner = NULL;
+	mutex->level = 0;
+}
+
+static inline void radeon_mutex_lock(struct radeon_mutex *mutex)
+{
+	if (mutex_trylock(&mutex->mutex)) {
+		/* The mutex was unlocked before, so it's ours now */
+		mutex->owner = current;
+	} else if (mutex->owner != current) {
+		/* Another process locked the mutex, take it */
+		mutex_lock(&mutex->mutex);
+		mutex->owner = current;
+	}
+	/* Otherwise the mutex was already locked by this process */
+
+	mutex->level++;
+}
+
+static inline void radeon_mutex_unlock(struct radeon_mutex *mutex)
+{
+	if (--mutex->level > 0)
+		return;
+
+	mutex->owner = NULL;
+	mutex_unlock(&mutex->mutex);
+}
+
+
 /*
  * Core structure, functions and helpers.
  */
@@ -1197,7 +1242,7 @@
 	struct radeon_gem		gem;
 	struct radeon_pm		pm;
 	uint32_t			bios_scratch[RADEON_BIOS_NUM_SCRATCH];
-	struct mutex			cs_mutex;
+	struct radeon_mutex		cs_mutex;
 	struct radeon_wb		wb;
 	struct radeon_dummy_page	dummy_page;
 	bool				gpu_lockup;
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index e294456..a2e1eae 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -834,7 +834,7 @@
 	.pm_misc = &evergreen_pm_misc,
 	.pm_prepare = &evergreen_pm_prepare,
 	.pm_finish = &evergreen_pm_finish,
-	.pm_init_profile = &rs780_pm_init_profile,
+	.pm_init_profile = &sumo_pm_init_profile,
 	.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
 	.pre_page_flip = &evergreen_pre_page_flip,
 	.page_flip = &evergreen_page_flip,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 85f14f0..5991484 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -413,6 +413,7 @@
 extern void evergreen_pm_misc(struct radeon_device *rdev);
 extern void evergreen_pm_prepare(struct radeon_device *rdev);
 extern void evergreen_pm_finish(struct radeon_device *rdev);
+extern void sumo_pm_init_profile(struct radeon_device *rdev);
 extern void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc);
 extern u32 evergreen_page_flip(struct radeon_device *rdev, int crtc, u64 crtc_base);
 extern void evergreen_post_page_flip(struct radeon_device *rdev, int crtc);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 08d0b94..d24baf3 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -62,6 +62,87 @@
 	struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 info_2d1;
 };
 
+static void radeon_lookup_i2c_gpio_quirks(struct radeon_device *rdev,
+					  ATOM_GPIO_I2C_ASSIGMENT *gpio,
+					  u8 index)
+{
+	/* r4xx mask is technically not used by the hw, so patch in the legacy mask bits */
+	if ((rdev->family == CHIP_R420) ||
+	    (rdev->family == CHIP_R423) ||
+	    (rdev->family == CHIP_RV410)) {
+		if ((le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0018) ||
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x0019) ||
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x001a)) {
+			gpio->ucClkMaskShift = 0x19;
+			gpio->ucDataMaskShift = 0x18;
+		}
+	}
+
+	/* some evergreen boards have bad data for this entry */
+	if (ASIC_IS_DCE4(rdev)) {
+		if ((index == 7) &&
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) &&
+		    (gpio->sucI2cId.ucAccess == 0)) {
+			gpio->sucI2cId.ucAccess = 0x97;
+			gpio->ucDataMaskShift = 8;
+			gpio->ucDataEnShift = 8;
+			gpio->ucDataY_Shift = 8;
+			gpio->ucDataA_Shift = 8;
+		}
+	}
+
+	/* some DCE3 boards have bad data for this entry */
+	if (ASIC_IS_DCE3(rdev)) {
+		if ((index == 4) &&
+		    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) &&
+		    (gpio->sucI2cId.ucAccess == 0x94))
+			gpio->sucI2cId.ucAccess = 0x14;
+	}
+}
+
+static struct radeon_i2c_bus_rec radeon_get_bus_rec_for_i2c_gpio(ATOM_GPIO_I2C_ASSIGMENT *gpio)
+{
+	struct radeon_i2c_bus_rec i2c;
+
+	memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
+
+	i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
+	i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
+	i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
+	i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
+	i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
+	i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
+	i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
+	i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
+	i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
+	i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
+	i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
+	i2c.en_data_mask = (1 << gpio->ucDataEnShift);
+	i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
+	i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
+	i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
+	i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
+
+	if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
+		i2c.hw_capable = true;
+	else
+		i2c.hw_capable = false;
+
+	if (gpio->sucI2cId.ucAccess == 0xa0)
+		i2c.mm_i2c = true;
+	else
+		i2c.mm_i2c = false;
+
+	i2c.i2c_id = gpio->sucI2cId.ucAccess;
+
+	if (i2c.mask_clk_reg)
+		i2c.valid = true;
+	else
+		i2c.valid = false;
+
+	return i2c;
+}
+
 static struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_device *rdev,
 							       uint8_t id)
 {
@@ -85,59 +166,10 @@
 		for (i = 0; i < num_indices; i++) {
 			gpio = &i2c_info->asGPIO_Info[i];
 
-			/* some evergreen boards have bad data for this entry */
-			if (ASIC_IS_DCE4(rdev)) {
-				if ((i == 7) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) &&
-				    (gpio->sucI2cId.ucAccess == 0)) {
-					gpio->sucI2cId.ucAccess = 0x97;
-					gpio->ucDataMaskShift = 8;
-					gpio->ucDataEnShift = 8;
-					gpio->ucDataY_Shift = 8;
-					gpio->ucDataA_Shift = 8;
-				}
-			}
-
-			/* some DCE3 boards have bad data for this entry */
-			if (ASIC_IS_DCE3(rdev)) {
-				if ((i == 4) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) &&
-				    (gpio->sucI2cId.ucAccess == 0x94))
-					gpio->sucI2cId.ucAccess = 0x14;
-			}
+			radeon_lookup_i2c_gpio_quirks(rdev, gpio, i);
 
 			if (gpio->sucI2cId.ucAccess == id) {
-				i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
-				i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
-				i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
-				i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
-				i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
-				i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
-				i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
-				i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
-				i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
-				i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
-				i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
-				i2c.en_data_mask = (1 << gpio->ucDataEnShift);
-				i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
-				i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
-				i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
-				i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
-
-				if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
-					i2c.hw_capable = true;
-				else
-					i2c.hw_capable = false;
-
-				if (gpio->sucI2cId.ucAccess == 0xa0)
-					i2c.mm_i2c = true;
-				else
-					i2c.mm_i2c = false;
-
-				i2c.i2c_id = gpio->sucI2cId.ucAccess;
-
-				if (i2c.mask_clk_reg)
-					i2c.valid = true;
+				i2c = radeon_get_bus_rec_for_i2c_gpio(gpio);
 				break;
 			}
 		}
@@ -157,8 +189,6 @@
 	int i, num_indices;
 	char stmp[32];
 
-	memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
-
 	if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) {
 		i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset);
 
@@ -167,60 +197,12 @@
 
 		for (i = 0; i < num_indices; i++) {
 			gpio = &i2c_info->asGPIO_Info[i];
-			i2c.valid = false;
 
-			/* some evergreen boards have bad data for this entry */
-			if (ASIC_IS_DCE4(rdev)) {
-				if ((i == 7) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1936) &&
-				    (gpio->sucI2cId.ucAccess == 0)) {
-					gpio->sucI2cId.ucAccess = 0x97;
-					gpio->ucDataMaskShift = 8;
-					gpio->ucDataEnShift = 8;
-					gpio->ucDataY_Shift = 8;
-					gpio->ucDataA_Shift = 8;
-				}
-			}
+			radeon_lookup_i2c_gpio_quirks(rdev, gpio, i);
 
-			/* some DCE3 boards have bad data for this entry */
-			if (ASIC_IS_DCE3(rdev)) {
-				if ((i == 4) &&
-				    (le16_to_cpu(gpio->usClkMaskRegisterIndex) == 0x1fda) &&
-				    (gpio->sucI2cId.ucAccess == 0x94))
-					gpio->sucI2cId.ucAccess = 0x14;
-			}
+			i2c = radeon_get_bus_rec_for_i2c_gpio(gpio);
 
-			i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
-			i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
-			i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
-			i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
-			i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
-			i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
-			i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
-			i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
-			i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
-			i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
-			i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
-			i2c.en_data_mask = (1 << gpio->ucDataEnShift);
-			i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
-			i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
-			i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
-			i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
-
-			if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
-				i2c.hw_capable = true;
-			else
-				i2c.hw_capable = false;
-
-			if (gpio->sucI2cId.ucAccess == 0xa0)
-				i2c.mm_i2c = true;
-			else
-				i2c.mm_i2c = false;
-
-			i2c.i2c_id = gpio->sucI2cId.ucAccess;
-
-			if (i2c.mask_clk_reg) {
-				i2c.valid = true;
+			if (i2c.valid) {
 				sprintf(stmp, "0x%x", i2c.i2c_id);
 				rdev->i2c_bus[i] = radeon_i2c_create(rdev->ddev, &i2c, stmp);
 			}
@@ -1996,10 +1978,14 @@
 		return state_index;
 	/* last mode is usually default, array is low to high */
 	for (i = 0; i < num_modes; i++) {
+		rdev->pm.power_state[state_index].clock_info =
+			kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+		if (!rdev->pm.power_state[state_index].clock_info)
+			return state_index;
+		rdev->pm.power_state[state_index].num_clock_modes = 1;
 		rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
 		switch (frev) {
 		case 1:
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
 			rdev->pm.power_state[state_index].clock_info[0].mclk =
 				le16_to_cpu(power_info->info.asPowerPlayInfo[i].usMemoryClock);
 			rdev->pm.power_state[state_index].clock_info[0].sclk =
@@ -2035,7 +2021,6 @@
 			state_index++;
 			break;
 		case 2:
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
 			rdev->pm.power_state[state_index].clock_info[0].mclk =
 				le32_to_cpu(power_info->info_2.asPowerPlayInfo[i].ulMemoryClock);
 			rdev->pm.power_state[state_index].clock_info[0].sclk =
@@ -2072,7 +2057,6 @@
 			state_index++;
 			break;
 		case 3:
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
 			rdev->pm.power_state[state_index].clock_info[0].mclk =
 				le32_to_cpu(power_info->info_3.asPowerPlayInfo[i].ulMemoryClock);
 			rdev->pm.power_state[state_index].clock_info[0].sclk =
@@ -2257,7 +2241,7 @@
 		rdev->pm.default_power_state_index = state_index;
 		rdev->pm.power_state[state_index].default_clock_mode =
 			&rdev->pm.power_state[state_index].clock_info[mode_index - 1];
-		if (ASIC_IS_DCE5(rdev)) {
+		if (ASIC_IS_DCE5(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
 			/* NI chips post without MC ucode, so default clocks are strobe mode only */
 			rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk;
 			rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk;
@@ -2377,17 +2361,31 @@
 			 le16_to_cpu(power_info->pplib.usNonClockInfoArrayOffset) +
 			 (power_state->v1.ucNonClockStateIndex *
 			  power_info->pplib.ucNonClockSize));
-		for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
-			clock_info = (union pplib_clock_info *)
-				(mode_info->atom_context->bios + data_offset +
-				 le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
-				 (power_state->v1.ucClockStateIndices[j] *
-				  power_info->pplib.ucClockInfoSize));
-			valid = radeon_atombios_parse_pplib_clock_info(rdev,
-								       state_index, mode_index,
-								       clock_info);
-			if (valid)
-				mode_index++;
+		rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+							     ((power_info->pplib.ucStateEntrySize - 1) ?
+							      (power_info->pplib.ucStateEntrySize - 1) : 1),
+							     GFP_KERNEL);
+		if (!rdev->pm.power_state[i].clock_info)
+			return state_index;
+		if (power_info->pplib.ucStateEntrySize - 1) {
+			for (j = 0; j < (power_info->pplib.ucStateEntrySize - 1); j++) {
+				clock_info = (union pplib_clock_info *)
+					(mode_info->atom_context->bios + data_offset +
+					 le16_to_cpu(power_info->pplib.usClockInfoArrayOffset) +
+					 (power_state->v1.ucClockStateIndices[j] *
+					  power_info->pplib.ucClockInfoSize));
+				valid = radeon_atombios_parse_pplib_clock_info(rdev,
+									       state_index, mode_index,
+									       clock_info);
+				if (valid)
+					mode_index++;
+			}
+		} else {
+			rdev->pm.power_state[state_index].clock_info[0].mclk =
+				rdev->clock.default_mclk;
+			rdev->pm.power_state[state_index].clock_info[0].sclk =
+				rdev->clock.default_sclk;
+			mode_index++;
 		}
 		rdev->pm.power_state[state_index].num_clock_modes = mode_index;
 		if (mode_index) {
@@ -2456,18 +2454,32 @@
 		non_clock_array_index = i; /* power_state->v2.nonClockInfoIndex */
 		non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *)
 			&non_clock_info_array->nonClockInfo[non_clock_array_index];
-		for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
-			clock_array_index = power_state->v2.clockInfoIndex[j];
-			/* XXX this might be an inagua bug... */
-			if (clock_array_index >= clock_info_array->ucNumEntries)
-				continue;
-			clock_info = (union pplib_clock_info *)
-				&clock_info_array->clockInfo[clock_array_index];
-			valid = radeon_atombios_parse_pplib_clock_info(rdev,
-								       state_index, mode_index,
-								       clock_info);
-			if (valid)
-				mode_index++;
+		rdev->pm.power_state[i].clock_info = kzalloc(sizeof(struct radeon_pm_clock_info) *
+							     (power_state->v2.ucNumDPMLevels ?
+							      power_state->v2.ucNumDPMLevels : 1),
+							     GFP_KERNEL);
+		if (!rdev->pm.power_state[i].clock_info)
+			return state_index;
+		if (power_state->v2.ucNumDPMLevels) {
+			for (j = 0; j < power_state->v2.ucNumDPMLevels; j++) {
+				clock_array_index = power_state->v2.clockInfoIndex[j];
+				/* XXX this might be an inagua bug... */
+				if (clock_array_index >= clock_info_array->ucNumEntries)
+					continue;
+				clock_info = (union pplib_clock_info *)
+					&clock_info_array->clockInfo[clock_array_index];
+				valid = radeon_atombios_parse_pplib_clock_info(rdev,
+									       state_index, mode_index,
+									       clock_info);
+				if (valid)
+					mode_index++;
+			}
+		} else {
+			rdev->pm.power_state[state_index].clock_info[0].mclk =
+				rdev->clock.default_mclk;
+			rdev->pm.power_state[state_index].clock_info[0].sclk =
+				rdev->clock.default_sclk;
+			mode_index++;
 		}
 		rdev->pm.power_state[state_index].num_clock_modes = mode_index;
 		if (mode_index) {
@@ -2524,19 +2536,23 @@
 	} else {
 		rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL);
 		if (rdev->pm.power_state) {
-			/* add the default mode */
-			rdev->pm.power_state[state_index].type =
-				POWER_STATE_TYPE_DEFAULT;
-			rdev->pm.power_state[state_index].num_clock_modes = 1;
-			rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
-			rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
-			rdev->pm.power_state[state_index].default_clock_mode =
-				&rdev->pm.power_state[state_index].clock_info[0];
-			rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
-			rdev->pm.power_state[state_index].pcie_lanes = 16;
-			rdev->pm.default_power_state_index = state_index;
-			rdev->pm.power_state[state_index].flags = 0;
-			state_index++;
+			rdev->pm.power_state[0].clock_info =
+				kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+			if (rdev->pm.power_state[0].clock_info) {
+				/* add the default mode */
+				rdev->pm.power_state[state_index].type =
+					POWER_STATE_TYPE_DEFAULT;
+				rdev->pm.power_state[state_index].num_clock_modes = 1;
+				rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
+				rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
+				rdev->pm.power_state[state_index].default_clock_mode =
+					&rdev->pm.power_state[state_index].clock_info[0];
+				rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+				rdev->pm.power_state[state_index].pcie_lanes = 16;
+				rdev->pm.default_power_state_index = state_index;
+				rdev->pm.power_state[state_index].flags = 0;
+				state_index++;
+			}
 		}
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index 5cafc90..17e1a9b2 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -98,7 +98,7 @@
 	struct radeon_bo *sobj = NULL;
 	uint64_t saddr, daddr;
 	int r, n;
-	unsigned int time;
+	int time;
 
 	n = RADEON_BENCHMARK_ITERATIONS;
 	r = radeon_bo_create(rdev, size, PAGE_SIZE, true, sdomain, &sobj);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 8bf83c4..81fc100 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -2563,14 +2563,17 @@
 
 	/* allocate 2 power states */
 	rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * 2, GFP_KERNEL);
-	if (!rdev->pm.power_state) {
-		rdev->pm.default_power_state_index = state_index;
-		rdev->pm.num_power_states = 0;
-
-		rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
-		rdev->pm.current_clock_mode_index = 0;
-		return;
-	}
+	if (rdev->pm.power_state) {
+		/* allocate 1 clock mode per state */
+		rdev->pm.power_state[0].clock_info =
+			kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+		rdev->pm.power_state[1].clock_info =
+			kzalloc(sizeof(struct radeon_pm_clock_info) * 1, GFP_KERNEL);
+		if (!rdev->pm.power_state[0].clock_info ||
+		    !rdev->pm.power_state[1].clock_info)
+			goto pm_failed;
+	} else
+		goto pm_failed;
 
 	/* check for a thermal chip */
 	offset = combios_get_table_offset(dev, COMBIOS_OVERDRIVE_INFO_TABLE);
@@ -2735,6 +2738,14 @@
 
 	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
 	rdev->pm.current_clock_mode_index = 0;
+	return;
+
+pm_failed:
+	rdev->pm.default_power_state_index = state_index;
+	rdev->pm.num_power_states = 0;
+
+	rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+	rdev->pm.current_clock_mode_index = 0;
 }
 
 void radeon_external_tmds_setup(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index fae00c0..29afd71 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -93,7 +93,7 @@
 {
 	struct drm_radeon_cs *cs = data;
 	uint64_t *chunk_array_ptr;
-	unsigned size, i;
+	unsigned size, i, flags = 0;
 
 	if (!cs->num_chunks) {
 		return 0;
@@ -140,6 +140,10 @@
 			if (p->chunks[i].length_dw == 0)
 				return -EINVAL;
 		}
+		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS &&
+		    !p->chunks[i].length_dw) {
+			return -EINVAL;
+		}
 
 		p->chunks[i].length_dw = user_chunk.length_dw;
 		p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data;
@@ -155,6 +159,9 @@
 					       p->chunks[i].user_ptr, size)) {
 				return -EFAULT;
 			}
+			if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_FLAGS) {
+				flags = p->chunks[i].kdata[0];
+			}
 		} else {
 			p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
 			p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
@@ -174,6 +181,8 @@
 			  p->chunks[p->chunk_ib_idx].length_dw);
 		return -EINVAL;
 	}
+
+	p->keep_tiling_flags = (flags & RADEON_CS_KEEP_TILING_FLAGS) != 0;
 	return 0;
 }
 
@@ -222,7 +231,7 @@
 	struct radeon_cs_chunk *ib_chunk;
 	int r;
 
-	mutex_lock(&rdev->cs_mutex);
+	radeon_mutex_lock(&rdev->cs_mutex);
 	/* initialize parser */
 	memset(&parser, 0, sizeof(struct radeon_cs_parser));
 	parser.filp = filp;
@@ -233,14 +242,14 @@
 	if (r) {
 		DRM_ERROR("Failed to initialize parser !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r =  radeon_ib_get(rdev, &parser.ib);
 	if (r) {
 		DRM_ERROR("Failed to get ib !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r = radeon_cs_parser_relocs(&parser);
@@ -248,7 +257,7 @@
 		if (r != -ERESTARTSYS)
 			DRM_ERROR("Failed to parse relocation %d!\n", r);
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	/* Copy the packet into the IB, the parser will read from the
@@ -260,14 +269,14 @@
 	if (r || parser.parser_error) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r = radeon_cs_finish_pages(&parser);
 	if (r) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
-		mutex_unlock(&rdev->cs_mutex);
+		radeon_mutex_unlock(&rdev->cs_mutex);
 		return r;
 	}
 	r = radeon_ib_schedule(rdev, parser.ib);
@@ -275,7 +284,7 @@
 		DRM_ERROR("Failed to schedule IB !\n");
 	}
 	radeon_cs_parser_fini(&parser, r);
-	mutex_unlock(&rdev->cs_mutex);
+	radeon_mutex_unlock(&rdev->cs_mutex);
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index c33bc91..c4d00a1 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -716,7 +716,7 @@
 
 	/* mutex initialization are all done here so we
 	 * can recall function without having locking issues */
-	mutex_init(&rdev->cs_mutex);
+	radeon_mutex_init(&rdev->cs_mutex);
 	mutex_init(&rdev->ib_pool.mutex);
 	mutex_init(&rdev->cp.mutex);
 	mutex_init(&rdev->dc_hw_i2c_mutex);
@@ -955,6 +955,9 @@
 	int r;
 	int resched;
 
+	/* Prevent CS ioctl from interfering */
+	radeon_mutex_lock(&rdev->cs_mutex);
+
 	radeon_save_bios_scratch_regs(rdev);
 	/* block TTM */
 	resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
@@ -967,10 +970,15 @@
 		radeon_restore_bios_scratch_regs(rdev);
 		drm_helper_resume_force_mode(rdev->ddev);
 		ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
-		return 0;
 	}
-	/* bad news, how to tell it to userspace ? */
-	dev_info(rdev->dev, "GPU reset failed\n");
+
+	radeon_mutex_unlock(&rdev->cs_mutex);
+
+	if (r) {
+		/* bad news, how to tell it to userspace ? */
+		dev_info(rdev->dev, "GPU reset failed\n");
+	}
+
 	return r;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index a0b35e9..71499fc 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -53,9 +53,10 @@
  *   2.9.0 - r600 tiling (s3tc,rgtc) working, SET_PREDICATION packet 3 on r600 + eg, backend query
  *   2.10.0 - fusion 2D tiling
  *   2.11.0 - backend map, initial compute support for the CS checker
+ *   2.12.0 - RADEON_CS_KEEP_TILING_FLAGS
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	11
+#define KMS_DRIVER_MINOR	12
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 41a5d48..daadf21 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -991,12 +991,6 @@
 				   struct drm_display_mode *mode,
 				   struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = crtc->dev;
-	struct radeon_device *rdev = dev->dev_private;
-
-	/* adjust pm to upcoming mode change */
-	radeon_pm_compute_clocks(rdev);
-
 	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
 		return false;
 	return true;
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 6fabe89..78a665b 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -53,6 +53,24 @@
 
 #define ACPI_AC_CLASS           "ac_adapter"
 
+int radeon_pm_get_type_index(struct radeon_device *rdev,
+			     enum radeon_pm_state_type ps_type,
+			     int instance)
+{
+	int i;
+	int found_instance = -1;
+
+	for (i = 0; i < rdev->pm.num_power_states; i++) {
+		if (rdev->pm.power_state[i].type == ps_type) {
+			found_instance++;
+			if (found_instance == instance)
+				return i;
+		}
+	}
+	/* return default if no match */
+	return rdev->pm.default_power_state_index;
+}
+
 #ifdef CONFIG_ACPI
 static int radeon_acpi_event(struct notifier_block *nb,
 			     unsigned long val,
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 617b646..0bb0f5f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -574,10 +574,16 @@
 		return ret;
 
 	spin_lock(&glob->lru_lock);
+
+	if (unlikely(list_empty(&bo->ddestroy))) {
+		spin_unlock(&glob->lru_lock);
+		return 0;
+	}
+
 	ret = ttm_bo_reserve_locked(bo, interruptible,
 				    no_wait_reserve, false, 0);
 
-	if (unlikely(ret != 0) || list_empty(&bo->ddestroy)) {
+	if (unlikely(ret != 0)) {
 		spin_unlock(&glob->lru_lock);
 		return ret;
 	}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 03daefa..880e285 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -105,6 +105,10 @@
 	struct vmw_dma_buffer *dmabuf = NULL;
 	int ret;
 
+	/* A lot of the code assumes this */
+	if (handle && (width != 64 || height != 64))
+		return -EINVAL;
+
 	if (handle) {
 		ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
 						     handle, &surface);
@@ -410,8 +414,9 @@
 	top = clips->y1;
 	bottom = clips->y2;
 
-	clips_ptr = clips;
-	for (i = 1; i < num_clips; i++, clips_ptr += inc) {
+	/* skip the first clip rect */
+	for (i = 1, clips_ptr = clips + inc;
+	     i < num_clips; i++, clips_ptr += inc) {
 		left = min_t(int, left, (int)clips_ptr->x1);
 		right = max_t(int, right, (int)clips_ptr->x2);
 		top = min_t(int, top, (int)clips_ptr->y1);
@@ -1323,7 +1328,10 @@
 	 * drm_encoder_cleanup which takes the lock we deadlock.
 	 */
 	drm_mode_config_cleanup(dev_priv->dev);
-	vmw_kms_close_legacy_display_system(dev_priv);
+	if (dev_priv->sou_priv)
+		vmw_kms_close_screen_object_display(dev_priv);
+	else
+		vmw_kms_close_legacy_display_system(dev_priv);
 	return 0;
 }
 
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index c72f1c0..111d956 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -465,31 +465,29 @@
 	while (new_bus) {
 		new_bridge = new_bus->self;
 
-		if (new_bridge) {
-			/* go through list of devices already registered */
-			list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
-				bus = same_bridge_vgadev->pdev->bus;
+		/* go through list of devices already registered */
+		list_for_each_entry(same_bridge_vgadev, &vga_list, list) {
+			bus = same_bridge_vgadev->pdev->bus;
+			bridge = bus->self;
+
+			/* see if the share a bridge with this device */
+			if (new_bridge == bridge) {
+				/* if their direct parent bridge is the same
+				   as any bridge of this device then it can't be used
+				   for that device */
+				same_bridge_vgadev->bridge_has_one_vga = false;
+			}
+
+			/* now iterate the previous devices bridge hierarchy */
+			/* if the new devices parent bridge is in the other devices
+			   hierarchy then we can't use it to control this device */
+			while (bus) {
 				bridge = bus->self;
-
-				/* see if the share a bridge with this device */
-				if (new_bridge == bridge) {
-					/* if their direct parent bridge is the same
-					   as any bridge of this device then it can't be used
-					   for that device */
-					same_bridge_vgadev->bridge_has_one_vga = false;
+				if (bridge) {
+					if (bridge == vgadev->pdev->bus->self)
+						vgadev->bridge_has_one_vga = false;
 				}
-
-				/* now iterate the previous devices bridge hierarchy */
-				/* if the new devices parent bridge is in the other devices
-				   hierarchy then we can't use it to control this device */
-				while (bus) {
-					bridge = bus->self;
-					if (bridge) {
-						if (bridge == vgadev->pdev->bus->self)
-							vgadev->bridge_has_one_vga = false;
-					}
-					bus = bus->parent;
-				}
+				bus = bus->parent;
 			}
 		}
 		new_bus = new_bus->parent;
@@ -993,14 +991,20 @@
 				uc = &priv->cards[i];
 		}
 
-		if (!uc)
-			return -EINVAL;
+		if (!uc) {
+			ret_val = -EINVAL;
+			goto done;
+		}
 
-		if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0)
-			return -EINVAL;
+		if (io_state & VGA_RSRC_LEGACY_IO && uc->io_cnt == 0) {
+			ret_val = -EINVAL;
+			goto done;
+		}
 
-		if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0)
-			return -EINVAL;
+		if (io_state & VGA_RSRC_LEGACY_MEM && uc->mem_cnt == 0) {
+			ret_val = -EINVAL;
+			goto done;
+		}
 
 		vga_put(pdev, io_state);
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9ec854a..91be41f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -315,7 +315,7 @@
 
 config SENSORS_EXYNOS4_TMU
 	tristate "Temperature sensor on Samsung EXYNOS4"
-	depends on EXYNOS4_DEV_TMU
+	depends on ARCH_EXYNOS4
 	help
 	  If you say yes here you get support for TMU (Thermal Managment
 	  Unit) on SAMSUNG EXYNOS4 series of SoC.
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
index 143461a..86980fe 100644
--- a/drivers/hwspinlock/u8500_hsem.c
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -21,6 +21,7 @@
  * General Public License for more details.
  */
 
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
@@ -108,10 +109,8 @@
 		return -ENODEV;
 
 	io_base = ioremap(res->start, resource_size(res));
-	if (!io_base) {
-		ret = -ENOMEM;
-		goto free_state;
-	}
+	if (!io_base)
+		return -ENOMEM;
 
 	/* make sure protocol 1 is selected */
 	val = readl(io_base + HSEM_CTRL_REG);
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 85584a5..525c734 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -488,7 +488,7 @@
 
 	if (flags & I2C_M_TEN) {
 		/* a ten bit address */
-		addr = 0xf0 | ((msg->addr >> 7) & 0x03);
+		addr = 0xf0 | ((msg->addr >> 7) & 0x06);
 		bit_dbg(2, &i2c_adap->dev, "addr0: %d\n", addr);
 		/* try extended address code...*/
 		ret = try_address(i2c_adap, addr, retries);
@@ -498,7 +498,7 @@
 			return -ENXIO;
 		}
 		/* the remaining 8 bit address */
-		ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
+		ret = i2c_outb(i2c_adap, msg->addr & 0xff);
 		if ((ret != 1) && !nak_ok) {
 			/* the chip did not ack / xmission error occurred */
 			dev_err(&i2c_adap->dev, "died at 2nd address code\n");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 131079a..1e56061 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -539,8 +539,10 @@
 	client->dev.type = &i2c_client_type;
 	client->dev.of_node = info->of_node;
 
+	/* For 10-bit clients, add an arbitrary offset to avoid collisions */
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
-		     client->addr);
+		     client->addr | ((client->flags & I2C_CLIENT_TEN)
+				     ? 0xa000 : 0));
 	status = device_register(&client->dev);
 	if (status)
 		goto out_err;
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index c90ce50..57a45ce8 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -579,7 +579,7 @@
 	return 0;
 }
 
-int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action,
+static int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action,
 			 void *data)
 {
 	struct device *dev = data;
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 67cbcfa..847553f 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
  *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
- *  Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz
+ *  Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
  *
  * CYPRESS CY82C693 chipset IDE controller
  *
@@ -90,7 +90,7 @@
 	u8 time_16, time_8;
 
 	/* select primary or secondary channel */
-	if (hwif->index > 0) {  /* drive is on the secondary channel */
+	if (drive->dn > 1) {  /* drive is on the secondary channel */
 		dev = pci_get_slot(dev->bus, dev->devfn+1);
 		if (!dev) {
 			printk(KERN_ERR "%s: tune_drive: "
@@ -141,7 +141,7 @@
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
 	}
-	if (hwif->index > 0)
+	if (drive->dn > 1)
 		pci_dev_put(dev);
 }
 
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 4a697a2..8716066 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -521,8 +521,8 @@
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
 		d.init_dma = icside_dma_init;
 		d.port_ops = &icside_v6_port_ops;
+	} else
 		d.dma_ops = NULL;
-	}
 
 	ret = ide_host_register(host, &d, hws);
 	if (ret)
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 04b0956..8126824 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -43,7 +43,6 @@
 /* For SCSI -> ATAPI command conversion */
 #include <scsi/scsi.h>
 
-#include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/byteorder.h>
 #include <linux/uaccess.h>
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 61fdf544..3d42043 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -35,7 +35,6 @@
 #include <scsi/scsi_ioctl.h>
 
 #include <asm/byteorder.h>
-#include <linux/irq.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/unaligned.h>
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 7ecb1ad..ce8237d 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -41,7 +41,6 @@
 #include <scsi/scsi.h>
 
 #include <asm/byteorder.h>
-#include <linux/irq.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/unaligned.h>
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index b59d04c..1892e81 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -331,7 +331,7 @@
 		.udma_mask	= udma,			\
 	}
 
-#define DECLARE_ICH_DEV(udma) \
+#define DECLARE_ICH_DEV(mwdma, udma) \
 	{ \
 		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_ich, \
@@ -340,7 +340,7 @@
 		.port_ops	= &ich_port_ops, \
 		.pio_mask	= ATA_PIO4, \
 		.swdma_mask	= ATA_SWDMA2_ONLY, \
-		.mwdma_mask	= ATA_MWDMA12_ONLY, \
+		.mwdma_mask	= mwdma, \
 		.udma_mask	= udma, \
 	}
 
@@ -362,13 +362,15 @@
 	/* 2: PIIX4 */
 	DECLARE_PIIX_DEV(ATA_UDMA2),
 	/* 3: ICH0 */
-	DECLARE_ICH_DEV(ATA_UDMA2),
+	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA2),
 	/* 4: ICH */
-	DECLARE_ICH_DEV(ATA_UDMA4),
+	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA4),
 	/* 5: PIIX4 */
 	DECLARE_PIIX_DEV(ATA_UDMA4),
-	/* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
-	DECLARE_ICH_DEV(ATA_UDMA5),
+	/* 6: ICH[2-6]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
+	DECLARE_ICH_DEV(ATA_MWDMA12_ONLY, ATA_UDMA5),
+	/* 7: ICH7/7-R, no MWDMA1 */
+	DECLARE_ICH_DEV(ATA_MWDMA2_ONLY, ATA_UDMA5),
 };
 
 /**
@@ -438,9 +440,9 @@
 #endif
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2),      6 },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19),    6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21),    7 },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1),  6 },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    6 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18),    7 },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6),     6 },
 	{ 0, },
 };
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index e53a1b7..281c914 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -113,12 +113,26 @@
 };
 MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
 
+#ifdef CONFIG_PM
+static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	/*
+	 * We must not disable or powerdown the device.
+	 * APM bios refuses to suspend if IDE is not accessible.
+	 */
+	pci_save_state(dev);
+	return 0;
+}
+#else
+#define triflex_ide_pci_suspend NULL
+#endif
+
 static struct pci_driver triflex_pci_driver = {
 	.name		= "TRIFLEX_IDE",
 	.id_table	= triflex_pci_tbl,
 	.probe		= triflex_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
+	.suspend	= triflex_ide_pci_suspend,
 	.resume		= ide_pci_resume,
 };
 
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 09b93b1..e2a9867 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1210,18 +1210,28 @@
  */
 static int elantech_set_properties(struct elantech_data *etd)
 {
+	/* This represents the version of IC body. */
 	int ver = (etd->fw_version & 0x0f0000) >> 16;
 
+	/* Early version of Elan touchpads doesn't obey the rule. */
 	if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
 		etd->hw_version = 1;
-	else if (etd->fw_version < 0x150600)
-		etd->hw_version = 2;
-	else if (ver == 5)
-		etd->hw_version = 3;
-	else if (ver == 6)
-		etd->hw_version = 4;
-	else
-		return -1;
+	else {
+		switch (ver) {
+		case 2:
+		case 4:
+			etd->hw_version = 2;
+			break;
+		case 5:
+			etd->hw_version = 3;
+			break;
+		case 6:
+			etd->hw_version = 4;
+			break;
+		default:
+			return -1;
+		}
+	}
 
 	/*
 	 * Turn on packet checking by default.
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 4b2a42f..d4d08bd 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -24,6 +24,7 @@
 #include <linux/irq.h>
 #include <linux/serio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #include <asm/mach-types.h>
 #include <plat/board-ams-delta.h>
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index bb9f5d3..b4cfc6c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -431,6 +431,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
 		},
 	},
+	{
+		/* Newer HP Pavilion dv4 models */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+		},
+	},
 	{ }
 };
 
@@ -560,6 +567,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
 		},
 	},
+	{
+		/* Newer HP Pavilion dv4 models */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c
index 9c192e7..288da5c 100644
--- a/drivers/iommu/omap-iommu-debug.c
+++ b/drivers/iommu/omap-iommu-debug.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c
index e8fdb88..46be456 100644
--- a/drivers/iommu/omap-iovmm.c
+++ b/drivers/iommu/omap-iovmm.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 661b692..6d5628b 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -270,11 +270,8 @@
 	del_timer_sync(&led_cdev->blink_timer);
 
 	if (led_cdev->blink_set &&
-	    !led_cdev->blink_set(led_cdev, delay_on, delay_off)) {
-		led_cdev->blink_delay_on = *delay_on;
-		led_cdev->blink_delay_off = *delay_off;
+	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
 		return;
-	}
 
 	/* blink with 1 Hz as default if nothing specified */
 	if (!*delay_on && !*delay_off)
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index 817f37a..c9570fc 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -159,7 +159,7 @@
 	err = macii_init_via();
 	if (err) goto out;
 
-	err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
+	err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
 			  macii_interrupt);
 	if (err) goto out;
 
diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c
index 9ab5b0c..34d02a9 100644
--- a/drivers/macintosh/via-maciisi.c
+++ b/drivers/macintosh/via-maciisi.c
@@ -122,8 +122,8 @@
 		return err;
 	}
 
-	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, 
-			"ADB", maciisi_interrupt)) {
+	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
+			maciisi_interrupt)) {
 		printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
 		return -EAGAIN;
 	}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 472aedf..297e260 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3110,7 +3110,7 @@
 	struct r5dev *pdev, *qdev;
 
 	clear_bit(STRIPE_HANDLE, &sh->state);
-	if (test_and_set_bit(STRIPE_ACTIVE, &sh->state)) {
+	if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) {
 		/* already being handled, ensure it gets handled
 		 * again when current action finishes */
 		set_bit(STRIPE_HANDLE, &sh->state);
@@ -3159,10 +3159,14 @@
 	/* check if the array has lost more than max_degraded devices and,
 	 * if so, some requests might need to be failed.
 	 */
-	if (s.failed > conf->max_degraded && s.to_read+s.to_write+s.written)
-		handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
-	if (s.failed > conf->max_degraded && s.syncing)
-		handle_failed_sync(conf, sh, &s);
+	if (s.failed > conf->max_degraded) {
+		sh->check_state = 0;
+		sh->reconstruct_state = 0;
+		if (s.to_read+s.to_write+s.written)
+			handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
+		if (s.syncing)
+			handle_failed_sync(conf, sh, &s);
+	}
 
 	/*
 	 * might be able to return some write requests if the parity blocks
@@ -3371,7 +3375,7 @@
 
 	return_io(s.return_bi);
 
-	clear_bit(STRIPE_ACTIVE, &sh->state);
+	clear_bit_unlock(STRIPE_ACTIVE, &sh->state);
 }
 
 static void raid5_activate_delayed(struct r5conf *conf)
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
index 2e8c288..3443455 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-i2c.c
@@ -398,7 +398,6 @@
 	u8 i2c_r_data[24];
 	u8 i = 0;
 	u8 fifo_status = 0;
-	int ret;
 	int status = 0;
 
 	mxl_i2c("read %d bytes", count);
@@ -418,7 +417,7 @@
 		i2c_w_data[4+(i*3)] = 0x00;
 	}
 
-	ret = mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+	mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
 
 	/* Check for I2C NACK status */
 	if (mxl111sf_i2c_check_status(state) == 1) {
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
index 91dc1fc..b741b3a 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-phy.c
@@ -296,8 +296,7 @@
 		goto fail;
 
 	ret = mxl111sf_write_reg(state, 0x00, 0x00);
-	if (mxl_fail(ret))
-		goto fail;
+	mxl_fail(ret);
 fail:
 	return ret;
 }
@@ -328,11 +327,13 @@
 		/* set hysteresis value  reg: 0x0B<5:0> */
 		ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG,
 					 (hysteresis_value & 0x3F));
+		mxl_fail(ret);
 	}
 
 	ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val);
+	mxl_fail(ret);
 
-	return val;
+	return ret;
 }
 
 /*
diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c
index 2446736..0df7f2a 100644
--- a/drivers/media/video/s5k6aa.c
+++ b/drivers/media/video/s5k6aa.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/media.h>
+#include <linux/module.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
index 725634d..844a4d7 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -220,8 +220,8 @@
 	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
 	cap->version = KERNEL_VERSION(1, 0, 0);
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
-						    | V4L2_CAP_STREAMING;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+			V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING;
 	return 0;
 }
 
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index ecef127..1e8cdb7 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -785,8 +785,8 @@
 	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
 	cap->version = KERNEL_VERSION(1, 0, 0);
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
-			  | V4L2_CAP_VIDEO_OUTPUT
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE_MPLANE
+			  | V4L2_CAP_VIDEO_OUTPUT_MPLANE
 			  | V4L2_CAP_STREAMING;
 	return 0;
 }
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 10c2364..254d326 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1016,7 +1016,8 @@
 
 	menu_info = &mapping->menu_info[query_menu->index];
 
-	if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+	if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+	    (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
 		s32 bitmap;
 
 		if (!ctrl->cached) {
@@ -1225,7 +1226,8 @@
 		/* Valid menu indices are reported by the GET_RES request for
 		 * UVC controls that support it.
 		 */
-		if (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES) {
+		if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK &&
+		    (ctrl->info.flags & UVC_CTRL_FLAG_GET_RES)) {
 			if (!ctrl->cached) {
 				ret = uvc_ctrl_populate_cache(chain, ctrl);
 				if (ret < 0)
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index f17f92b..0f415da 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -821,8 +821,8 @@
 	fill_event(&ev, ctrl, changes);
 
 	list_for_each_entry(sev, &ctrl->ev_subs, node)
-		if (sev->fh && (sev->fh != fh ||
-				(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
+		if (sev->fh != fh ||
+		    (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))
 			v4l2_event_queue_fh(sev->fh, &ev);
 }
 
@@ -947,6 +947,7 @@
 			if (ctrl->cluster[0]->has_volatiles)
 				ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
 		}
+		fh = NULL;
 	}
 	if (changed || update_inactive) {
 		/* If a control was changed that was not one of the controls
diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c
index 46037f22..c26ad96 100644
--- a/drivers/media/video/v4l2-event.c
+++ b/drivers/media/video/v4l2-event.c
@@ -216,6 +216,9 @@
 	unsigned long flags;
 	unsigned i;
 
+	if (sub->type == V4L2_EVENT_ALL)
+		return -EINVAL;
+
 	if (elems < 1)
 		elems = 1;
 	if (sub->type == V4L2_EVENT_CTRL) {
@@ -283,6 +286,7 @@
 {
 	struct v4l2_subscribed_event *sev;
 	unsigned long flags;
+	int i;
 
 	if (sub->type == V4L2_EVENT_ALL) {
 		v4l2_event_unsubscribe_all(fh);
@@ -293,8 +297,12 @@
 
 	sev = v4l2_event_subscribed(fh, sub->type, sub->id);
 	if (sev != NULL) {
+		/* Remove any pending events for this subscription */
+		for (i = 0; i < sev->in_use; i++) {
+			list_del(&sev->events[sev_pos(sev, i)].list);
+			fh->navailable--;
+		}
 		list_del(&sev->list);
-		sev->fh = NULL;
 	}
 
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 979e544..95a3f5e 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -131,6 +131,7 @@
 			continue;
 
 		for (plane = 0; plane < vb->num_planes; ++plane) {
+			vb->v4l2_planes[plane].length = q->plane_sizes[plane];
 			vb->v4l2_planes[plane].m.mem_offset = off;
 
 			dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n",
@@ -264,6 +265,7 @@
 	q->num_buffers -= buffers;
 	if (!q->num_buffers)
 		q->memory = 0;
+	INIT_LIST_HEAD(&q->queued_list);
 }
 
 /**
@@ -296,14 +298,14 @@
 {
 	unsigned int plane;
 	for (plane = 0; plane < vb->num_planes; ++plane) {
+		void *mem_priv = vb->planes[plane].mem_priv;
 		/*
 		 * If num_users() has not been provided, call_memop
 		 * will return 0, apparently nobody cares about this
 		 * case anyway. If num_users() returns more than 1,
 		 * we are not the only user of the plane's memory.
 		 */
-		if (call_memop(q, plane, num_users,
-				vb->planes[plane].mem_priv) > 1)
+		if (mem_priv && call_memop(q, plane, num_users, mem_priv) > 1)
 			return true;
 	}
 	return false;
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
index 4175544..ec10629 100644
--- a/drivers/mfd/ab5500-core.c
+++ b/drivers/mfd/ab5500-core.c
@@ -13,6 +13,7 @@
  * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
  */
 
+#include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
index 6be1fe6..43c0ebb 100644
--- a/drivers/mfd/ab5500-debugfs.c
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -4,6 +4,7 @@
  * Debugfs support for the AB5500 MFD driver
  */
 
+#include <linux/export.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/mfd/ab5500/ab5500.h>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d593878..5664696 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -472,7 +472,7 @@
 	  module will be called bmp085.
 
 config PCH_PHUB
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 	depends on PCI
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -480,12 +480,13 @@
 	  processor. The Topcliff has MAC address and Option ROM data in SROM.
 	  This driver can access MAC address and Option ROM data in SROM.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor's IOH,
+	  ML7213/ML7223/ML7831.
+	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h
index a662f59..82b2cb7 100644
--- a/drivers/misc/ad525x_dpot.h
+++ b/drivers/misc/ad525x_dpot.h
@@ -100,7 +100,7 @@
 	AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27),
 	AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
 			BRDAC0, 7, 28),
-	AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+	AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
 			BRDAC0, 8, 29),
 	AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
 			BRDAC0 | BRDAC1, 8, 30),
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
index 7ce6065..eb5cd28 100644
--- a/drivers/misc/carma/carma-fpga-program.c
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -945,8 +945,7 @@
 /* CTL-CPLD Version Register */
 #define CTL_CPLD_VERSION	0x2000
 
-static int fpga_of_probe(struct platform_device *op,
-			 const struct of_device_id *match)
+static int fpga_of_probe(struct platform_device *op)
 {
 	struct device_node *of_node = op->dev.of_node;
 	struct device *this_device;
@@ -1107,7 +1106,7 @@
 	{},
 };
 
-static struct of_platform_driver fpga_of_driver = {
+static struct platform_driver fpga_of_driver = {
 	.probe		= fpga_of_probe,
 	.remove		= fpga_of_remove,
 	.driver		= {
@@ -1124,12 +1123,12 @@
 static int __init fpga_init(void)
 {
 	led_trigger_register_simple("fpga", &ledtrig_fpga);
-	return of_register_platform_driver(&fpga_of_driver);
+	return platform_driver_register(&fpga_of_driver);
 }
 
 static void __exit fpga_exit(void)
 {
-	of_unregister_platform_driver(&fpga_of_driver);
+	platform_driver_unregister(&fpga_of_driver);
 	led_trigger_unregister_simple(ledtrig_fpga);
 }
 
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
index 3965821..14e974b2 100644
--- a/drivers/misc/carma/carma-fpga.c
+++ b/drivers/misc/carma/carma-fpga.c
@@ -1249,8 +1249,7 @@
 	return true;
 }
 
-static int data_of_probe(struct platform_device *op,
-			 const struct of_device_id *match)
+static int data_of_probe(struct platform_device *op)
 {
 	struct device_node *of_node = op->dev.of_node;
 	struct device *this_device;
@@ -1401,7 +1400,7 @@
 	{},
 };
 
-static struct of_platform_driver data_of_driver = {
+static struct platform_driver data_of_driver = {
 	.probe		= data_of_probe,
 	.remove		= data_of_remove,
 	.driver		= {
@@ -1417,12 +1416,12 @@
 
 static int __init data_init(void)
 {
-	return of_register_platform_driver(&data_of_driver);
+	return platform_driver_register(&data_of_driver);
 }
 
 static void __exit data_exit(void)
 {
-	of_unregister_platform_driver(&data_of_driver);
+	platform_driver_unregister(&data_of_driver);
 }
 
 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 26cf12c..701edf6 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -85,7 +85,7 @@
 
 config EEPROM_DIGSY_MTC_CFG
 	bool "DigsyMTC display configuration EEPROMs device"
-	depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+	depends on GPIO_MPC5200 && SPI_GPIO
 	help
 	  This option enables access to display configuration EEPROMs
 	  on digsy_mtc board. You have to additionally select Microwire
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index dee33ad..10fc478 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,10 +41,10 @@
 #define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset
 					      (Intel EG20T PCH)*/
 #define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
-						offset(OKI SEMICONDUCTOR ML7213)
+						offset(LAPIS Semicon ML7213)
 					      */
 #define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address
-						offset(OKI SEMICONDUCTOR ML7223)
+						offset(LAPIS Semicon ML7223)
 					      */
 
 /* MAX number of INT_REDUCE_CONTROL registers */
@@ -73,6 +73,9 @@
 #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB	0x8012 /* for Bus-m */
 #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB	0x8002 /* for Bus-n */
 
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
 /* SROM ACCESS Macro */
 #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
 
@@ -115,6 +118,7 @@
  * @pch_mac_start_address:		MAC address area start address
  * @pch_opt_rom_start_address:		Option ROM start address
  * @ioh_type:				Save IOH type
+ * @pdev:				pointer to pci device struct
  */
 struct pch_phub_reg {
 	u32 phub_id_reg;
@@ -136,6 +140,7 @@
 	u32 pch_mac_start_address;
 	u32 pch_opt_rom_start_address;
 	int ioh_type;
+	struct pci_dev *pdev;
 };
 
 /* SROM SPEC for MAC address assignment offset */
@@ -471,7 +476,7 @@
 	int retval;
 	int i;
 
-	if (chip->ioh_type == 1) /* EG20T */
+	if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
 		retval = pch_phub_gbe_serial_rom_conf(chip);
 	else	/* ML7223 */
 		retval = pch_phub_gbe_serial_rom_conf_mp(chip);
@@ -498,6 +503,7 @@
 	unsigned int orom_size;
 	int ret;
 	int err;
+	ssize_t rom_size;
 
 	struct pch_phub_reg *chip =
 		dev_get_drvdata(container_of(kobj, struct device, kobj));
@@ -509,6 +515,10 @@
 	}
 
 	/* Get Rom signature */
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address)
+		goto exrom_map_err;
+
 	pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address,
 				(unsigned char *)&rom_signature);
 	rom_signature &= 0xff;
@@ -539,10 +549,13 @@
 		goto return_err;
 	}
 return_ok:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 	mutex_unlock(&pch_phub_mutex);
 	return addr_offset;
 
 return_err:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+exrom_map_err:
 	mutex_unlock(&pch_phub_mutex);
 return_err_nomutex:
 	return err;
@@ -555,6 +568,7 @@
 	int err;
 	unsigned int addr_offset;
 	int ret;
+	ssize_t rom_size;
 	struct pch_phub_reg *chip =
 		dev_get_drvdata(container_of(kobj, struct device, kobj));
 
@@ -571,6 +585,12 @@
 		goto return_ok;
 	}
 
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address) {
+		err = -ENOMEM;
+		goto exrom_map_err;
+	}
+
 	for (addr_offset = 0; addr_offset < count; addr_offset++) {
 		if (PCH_PHUB_OROM_SIZE < off + addr_offset)
 			goto return_ok;
@@ -585,10 +605,14 @@
 	}
 
 return_ok:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 	mutex_unlock(&pch_phub_mutex);
 	return addr_offset;
 
 return_err:
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+
+exrom_map_err:
 	mutex_unlock(&pch_phub_mutex);
 	return err;
 }
@@ -598,8 +622,14 @@
 {
 	u8 mac[8];
 	struct pch_phub_reg *chip = dev_get_drvdata(dev);
+	ssize_t rom_size;
+
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address)
+		return -ENOMEM;
 
 	pch_phub_read_gbe_mac_addr(chip, mac);
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 
 	return sprintf(buf, "%pM\n", mac);
 }
@@ -608,6 +638,7 @@
 			     const char *buf, size_t count)
 {
 	u8 mac[6];
+	ssize_t rom_size;
 	struct pch_phub_reg *chip = dev_get_drvdata(dev);
 
 	if (count != 18)
@@ -617,7 +648,12 @@
 		(u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3],
 		(u32 *)&mac[4], (u32 *)&mac[5]);
 
+	chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+	if (!chip->pch_phub_extrom_base_address)
+		return -ENOMEM;
+
 	pch_phub_write_gbe_mac_addr(chip, mac);
+	pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
 
 	return count;
 }
@@ -640,7 +676,6 @@
 	int retval;
 
 	int ret;
-	ssize_t rom_size;
 	struct pch_phub_reg *chip;
 
 	chip = kzalloc(sizeof(struct pch_phub_reg), GFP_KERNEL);
@@ -677,19 +712,7 @@
 		"in pch_phub_base_address variable is %p\n", __func__,
 		chip->pch_phub_base_address);
 
-	if (id->driver_data != 3) {
-		chip->pch_phub_extrom_base_address =\
-						   pci_map_rom(pdev, &rom_size);
-		if (chip->pch_phub_extrom_base_address == 0) {
-			dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__);
-			ret = -ENOMEM;
-			goto err_pci_map;
-		}
-		dev_dbg(&pdev->dev, "%s : "
-			"pci_map_rom SUCCESS and value in "
-			"pch_phub_extrom_base_address variable is %p\n",
-			__func__, chip->pch_phub_extrom_base_address);
-	}
+	chip->pdev = pdev; /* Save pci device struct */
 
 	if (id->driver_data == 1) { /* EG20T PCH */
 		const char *board_name;
@@ -763,6 +786,22 @@
 		chip->pch_opt_rom_start_address =\
 						 PCH_PHUB_ROM_START_ADDR_ML7223;
 		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+	} else if (id->driver_data == 5) { /* ML7831 */
+		retval = sysfs_create_file(&pdev->dev.kobj,
+					   &dev_attr_pch_mac.attr);
+		if (retval)
+			goto err_sysfs_create;
+
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto exit_bin_attr;
+
+		/* set the prefech value */
+		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+		/* set the interrupt delay value */
+		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+		chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
 	}
 
 	chip->ioh_type = id->driver_data;
@@ -773,8 +812,6 @@
 	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
 
 err_sysfs_create:
-	pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
-err_pci_map:
 	pci_iounmap(pdev, chip->pch_phub_base_address);
 err_pci_iomap:
 	pci_release_regions(pdev);
@@ -792,7 +829,6 @@
 
 	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
 	sysfs_remove_bin_file(&pdev->dev.kobj, &pch_bin_attr);
-	pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
 	pci_iounmap(pdev, chip->pch_phub_base_address);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
@@ -847,6 +883,7 @@
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5,  },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
@@ -873,5 +910,5 @@
 module_init(pch_phub_pci_init);
 module_exit(pch_phub_pci_exit);
 
-MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB");
+MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index cfbddbe..43d073b 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -903,6 +903,6 @@
 }
 module_exit(spear_pcie_gadget_exit);
 
-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
 MODULE_AUTHOR("Pratyush Anand");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index ae57769..4b976f0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -32,6 +32,7 @@
 /* VENDOR SPEC register */
 #define SDHCI_VENDOR_SPEC		0xC0
 #define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002
+#define SDHCI_WTMK_LVL			0x44
 #define SDHCI_MIX_CTRL			0x48
 
 /*
@@ -476,6 +477,13 @@
 	if (is_imx53_esdhc(imx_data))
 		imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
 
+	/*
+	 * The imx6q ROM code will change the default watermark level setting
+	 * to something insane.  Change it back here.
+	 */
+	if (is_imx6q_usdhc(imx_data))
+		writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
 	boarddata = &imx_data->boarddata;
 	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
 		if (!host->mmc->parent->platform_data) {
diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c
index 608967f..736ca10 100644
--- a/drivers/mtd/maps/bcm963xx-flash.c
+++ b/drivers/mtd/maps/bcm963xx-flash.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 583f66c..654a5e9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -245,6 +245,8 @@
 
 source "drivers/net/fddi/Kconfig"
 
+source "drivers/net/hippi/Kconfig"
+
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
 	depends on PNP
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 5a20804..4ef7e2f 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -319,6 +319,13 @@
 		goto out;
 	}
 
+	if (bond->slave_cnt > 0) {
+		pr_err("unable to update mode of %s because it has slaves.\n",
+			bond->dev->name);
+		ret = -EPERM;
+		goto out;
+	}
+
 	new_value = bond_parse_parm(buf, bond_mode_tbl);
 	if (new_value < 0)  {
 		pr_err("%s: Ignoring invalid mode value %.*s.\n",
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 6486ab8..2f6361e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -10548,33 +10548,38 @@
 
 int bnx2x_init_firmware(struct bnx2x *bp)
 {
-	const char *fw_file_name;
 	struct bnx2x_fw_file_hdr *fw_hdr;
 	int rc;
 
-	if (CHIP_IS_E1(bp))
-		fw_file_name = FW_FILE_NAME_E1;
-	else if (CHIP_IS_E1H(bp))
-		fw_file_name = FW_FILE_NAME_E1H;
-	else if (!CHIP_IS_E1x(bp))
-		fw_file_name = FW_FILE_NAME_E2;
-	else {
-		BNX2X_ERR("Unsupported chip revision\n");
-		return -EINVAL;
-	}
 
-	BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
+	if (!bp->firmware) {
+		const char *fw_file_name;
 
-	rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
-	if (rc) {
-		BNX2X_ERR("Can't load firmware file %s\n", fw_file_name);
-		goto request_firmware_exit;
-	}
+		if (CHIP_IS_E1(bp))
+			fw_file_name = FW_FILE_NAME_E1;
+		else if (CHIP_IS_E1H(bp))
+			fw_file_name = FW_FILE_NAME_E1H;
+		else if (!CHIP_IS_E1x(bp))
+			fw_file_name = FW_FILE_NAME_E2;
+		else {
+			BNX2X_ERR("Unsupported chip revision\n");
+			return -EINVAL;
+		}
+		BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
 
-	rc = bnx2x_check_firmware(bp);
-	if (rc) {
-		BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
-		goto request_firmware_exit;
+		rc = request_firmware(&bp->firmware, fw_file_name,
+				      &bp->pdev->dev);
+		if (rc) {
+			BNX2X_ERR("Can't load firmware file %s\n",
+				  fw_file_name);
+			goto request_firmware_exit;
+		}
+
+		rc = bnx2x_check_firmware(bp);
+		if (rc) {
+			BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
+			goto request_firmware_exit;
+		}
 	}
 
 	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
@@ -10630,6 +10635,7 @@
 	kfree(bp->init_ops);
 	kfree(bp->init_data);
 	release_firmware(bp->firmware);
+	bp->firmware = NULL;
 }
 
 
@@ -10925,6 +10931,8 @@
 	if (bp->doorbells)
 		iounmap(bp->doorbells);
 
+	bnx2x_release_firmware(bp);
+
 	bnx2x_free_mem_bp(bp);
 
 	free_netdev(dev);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 0440425..1451769 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -5380,7 +5380,7 @@
 	rc = drv->init_fw(bp);
 	if (rc) {
 		BNX2X_ERR("Error loading firmware\n");
-		goto fw_init_err;
+		goto init_err;
 	}
 
 	/* Handle the beginning of COMMON_XXX pases separatelly... */
@@ -5388,25 +5388,25 @@
 	case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
 		rc = bnx2x_func_init_cmn_chip(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	case FW_MSG_CODE_DRV_LOAD_COMMON:
 		rc = bnx2x_func_init_cmn(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	case FW_MSG_CODE_DRV_LOAD_PORT:
 		rc = bnx2x_func_init_port(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
 		rc = bnx2x_func_init_func(bp, drv);
 		if (rc)
-			goto init_hw_err;
+			goto init_err;
 
 		break;
 	default:
@@ -5414,10 +5414,7 @@
 		rc = -EINVAL;
 	}
 
-init_hw_err:
-	drv->release_fw(bp);
-
-fw_init_err:
+init_err:
 	drv->gunzip_end(bp);
 
 	/* In case of success, complete the comand immediatelly: no ramrods
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 98849a1..b48378a 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -7,6 +7,7 @@
 
 config NET_ATMEL
 	bool "Atmel devices"
+	default y
 	depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 6bb2b95..0b3567a 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -34,6 +34,8 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
 
 #include <asm/checksum.h>
 
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index fdc6c39..7803efa 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.29"
+#define DRV_VERSION		"1.30"
 
 /*
  * The Yukon II chipset takes 64 bit command blocks (called list elements)
@@ -68,7 +68,7 @@
 #define MAX_SKB_TX_LE	(2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
 #define TX_MIN_PENDING		(MAX_SKB_TX_LE+1)
 #define TX_MAX_PENDING		1024
-#define TX_DEF_PENDING		127
+#define TX_DEF_PENDING		63
 
 #define TX_WATCHDOG		(5 * HZ)
 #define NAPI_WEIGHT		64
@@ -869,6 +869,7 @@
 
 	/* block receiver */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+	sky2_read32(hw, B0_CTST);
 }
 
 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
@@ -1274,6 +1275,14 @@
 		     ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
 }
 
+/*
+ * Fixed initial key as seed to RSS.
+ */
+static const uint32_t rss_init_key[10] = {
+	0x7c3351da, 0x51c5cf4e,	0x44adbdd1, 0xe8d38d18,	0x48897c43,
+	0xb1d60e7e, 0x6a3dd760, 0x01a2e453, 0x16f46f13, 0x1a0e7b30
+};
+
 /* Enable/disable receive hash calculation (RSS) */
 static void rx_set_rss(struct net_device *dev, u32 features)
 {
@@ -1289,12 +1298,9 @@
 
 	/* Program RSS initial values */
 	if (features & NETIF_F_RXHASH) {
-		u32 key[nkeys];
-
-		get_random_bytes(key, nkeys * sizeof(u32));
 		for (i = 0; i < nkeys; i++)
 			sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
-				     key[i]);
+				     rss_init_key[i]);
 
 		/* Need to turn on (undocumented) flag to make hashing work  */
 		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
@@ -1717,6 +1723,8 @@
 	if (err)
 		dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
 	else {
+		hw->flags |= SKY2_HW_IRQ_SETUP;
+
 		napi_enable(&hw->napi);
 		sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 		sky2_read32(hw, B0_IMSK);
@@ -1727,7 +1735,7 @@
 
 
 /* Bring up network interface. */
-static int sky2_up(struct net_device *dev)
+static int sky2_open(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
@@ -1747,6 +1755,11 @@
 
 	sky2_hw_up(sky2);
 
+	if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+	    hw->chip_id == CHIP_ID_YUKON_PRM ||
+	    hw->chip_id == CHIP_ID_YUKON_OP_2)
+		imask |= Y2_IS_PHY_QLNK;	/* enable PHY Quick Link */
+
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
 	imask |= portirq_msk[port];
@@ -2040,6 +2053,8 @@
 
 	sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
 	sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
+
+	sky2_read32(hw, B0_CTST);
 }
 
 static void sky2_hw_down(struct sky2_port *sky2)
@@ -2090,7 +2105,7 @@
 }
 
 /* Network shutdown */
-static int sky2_down(struct net_device *dev)
+static int sky2_close(struct net_device *dev)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
@@ -2101,15 +2116,22 @@
 
 	netif_info(sky2, ifdown, dev, "disabling interface\n");
 
-	/* Disable port IRQ */
-	sky2_write32(hw, B0_IMSK,
-		     sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
-	sky2_read32(hw, B0_IMSK);
-
 	if (hw->ports == 1) {
+		sky2_write32(hw, B0_IMSK, 0);
+		sky2_read32(hw, B0_IMSK);
+
 		napi_disable(&hw->napi);
 		free_irq(hw->pdev->irq, hw);
+		hw->flags &= ~SKY2_HW_IRQ_SETUP;
 	} else {
+		u32 imask;
+
+		/* Disable port IRQ */
+		imask  = sky2_read32(hw, B0_IMSK);
+		imask &= ~portirq_msk[sky2->port];
+		sky2_write32(hw, B0_IMSK, imask);
+		sky2_read32(hw, B0_IMSK);
+
 		synchronize_irq(hw->pdev->irq);
 		napi_synchronize(&hw->napi);
 	}
@@ -2587,7 +2609,7 @@
 	if (netif_running(dev)) {
 		sky2_tx_complete(sky2, last);
 
-		/* Wake unless it's detached, and called e.g. from sky2_down() */
+		/* Wake unless it's detached, and called e.g. from sky2_close() */
 		if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
 			netif_wake_queue(dev);
 	}
@@ -3258,7 +3280,6 @@
 	    hw->chip_id == CHIP_ID_YUKON_PRM ||
 	    hw->chip_id == CHIP_ID_YUKON_OP_2) {
 		u16 reg;
-		u32 msk;
 
 		if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
 			/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
@@ -3281,11 +3302,6 @@
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
 
-		/* enable PHY Quick Link */
-		msk = sky2_read32(hw, B0_IMSK);
-		msk |= Y2_IS_PHY_QLNK;
-		sky2_write32(hw, B0_IMSK, msk);
-
 		/* check if PSMv2 was running before */
 		reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
 		if (reg & PCI_EXP_LNKCTL_ASPMC)
@@ -3383,7 +3399,7 @@
 		netif_tx_lock(dev);
 		netif_device_detach(dev);	/* stop txq */
 		netif_tx_unlock(dev);
-		sky2_down(dev);
+		sky2_close(dev);
 	}
 }
 
@@ -3393,7 +3409,7 @@
 	int err = 0;
 
 	if (netif_running(dev)) {
-		err = sky2_up(dev);
+		err = sky2_open(dev);
 		if (err) {
 			netdev_info(dev, "could not restart %d\n", err);
 			dev_close(dev);
@@ -3410,10 +3426,13 @@
 {
 	int i;
 
-	sky2_read32(hw, B0_IMSK);
-	sky2_write32(hw, B0_IMSK, 0);
-	synchronize_irq(hw->pdev->irq);
-	napi_disable(&hw->napi);
+	if (hw->flags & SKY2_HW_IRQ_SETUP) {
+		sky2_read32(hw, B0_IMSK);
+		sky2_write32(hw, B0_IMSK, 0);
+
+		synchronize_irq(hw->pdev->irq);
+		napi_disable(&hw->napi);
+	}
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
@@ -3446,11 +3465,12 @@
 		netif_wake_queue(dev);
 	}
 
-	sky2_write32(hw, B0_IMSK, imask);
-	sky2_read32(hw, B0_IMSK);
-
-	sky2_read32(hw, B0_Y2_SP_LISR);
-	napi_enable(&hw->napi);
+	if (hw->flags & SKY2_HW_IRQ_SETUP) {
+		sky2_write32(hw, B0_IMSK, imask);
+		sky2_read32(hw, B0_IMSK);
+		sky2_read32(hw, B0_Y2_SP_LISR);
+		napi_enable(&hw->napi);
+	}
 }
 
 static void sky2_restart(struct work_struct *work)
@@ -4071,6 +4091,16 @@
 	return 0;
 }
 
+/*
+ * Hardware is limited to min of 128 and max of 2048 for ring size
+ * and  rounded up to next power of two
+ * to avoid division in modulus calclation
+ */
+static unsigned long roundup_ring_size(unsigned long pending)
+{
+	return max(128ul, roundup_pow_of_two(pending+1));
+}
+
 static void sky2_get_ringparam(struct net_device *dev,
 			       struct ethtool_ringparam *ering)
 {
@@ -4098,7 +4128,7 @@
 
 	sky2->rx_pending = ering->rx_pending;
 	sky2->tx_pending = ering->tx_pending;
-	sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
+	sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
 
 	return sky2_reattach(dev);
 }
@@ -4556,7 +4586,7 @@
 	struct net_device *dev = ptr;
 	struct sky2_port *sky2 = netdev_priv(dev);
 
-	if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
+	if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
 		return NOTIFY_DONE;
 
 	switch (event) {
@@ -4621,8 +4651,8 @@
    not allowing netpoll on second port */
 static const struct net_device_ops sky2_netdev_ops[2] = {
   {
-	.ndo_open		= sky2_up,
-	.ndo_stop		= sky2_down,
+	.ndo_open		= sky2_open,
+	.ndo_stop		= sky2_close,
 	.ndo_start_xmit		= sky2_xmit_frame,
 	.ndo_do_ioctl		= sky2_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -4638,8 +4668,8 @@
 #endif
   },
   {
-	.ndo_open		= sky2_up,
-	.ndo_stop		= sky2_down,
+	.ndo_open		= sky2_open,
+	.ndo_stop		= sky2_close,
 	.ndo_start_xmit		= sky2_xmit_frame,
 	.ndo_do_ioctl		= sky2_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -4692,7 +4722,7 @@
 	spin_lock_init(&sky2->phy_lock);
 
 	sky2->tx_pending = TX_DEF_PENDING;
-	sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
+	sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
 	sky2->rx_pending = RX_DEF_PENDING;
 
 	hw->dev[port] = dev;
diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index 0af31b8..ff6f58b 100644
--- a/drivers/net/ethernet/marvell/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
@@ -2287,6 +2287,7 @@
 #define SKY2_HW_RSS_BROKEN	0x00000100
 #define SKY2_HW_VLAN_BROKEN     0x00000200
 #define SKY2_HW_RSS_CHKSUM	0x00000400	/* RSS requires chksum */
+#define SKY2_HW_IRQ_SETUP	0x00000800
 
 	u8	     	     chip_id;
 	u8		     chip_rev;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index b89c36d..c2df6c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -581,6 +581,7 @@
 		 * Packet is OK - process it.
 		 */
 		length = be32_to_cpu(cqe->byte_cnt);
+		length -= ring->fcs_del;
 		ring->bytes += length;
 		ring->packets++;
 
@@ -813,8 +814,11 @@
 	context->db_rec_addr = cpu_to_be64(ring->wqres.db.dma);
 
 	/* Cancel FCS removal if FW allows */
-	if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP)
+	if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP) {
 		context->param3 |= cpu_to_be32(1 << 29);
+		ring->fcs_del = ETH_FCS_LEN;
+	} else
+		ring->fcs_del = 0;
 
 	err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, context, qp, state);
 	if (err) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 8fda331c..207b5ad 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -272,6 +272,7 @@
 	u32 prod;
 	u32 cons;
 	u32 buf_size;
+	u8  fcs_del;
 	void *buf;
 	void *rx_info;
 	unsigned long bytes;
diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 1dca570..1c61d36 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -609,7 +609,7 @@
 };
 
 static const struct nv_ethtool_str nv_estats_str[] = {
-	{ "tx_bytes" },
+	{ "tx_bytes" }, /* includes Ethernet FCS CRC */
 	{ "tx_zero_rexmt" },
 	{ "tx_one_rexmt" },
 	{ "tx_many_rexmt" },
@@ -637,7 +637,7 @@
 	/* version 2 stats */
 	{ "tx_deferral" },
 	{ "tx_packets" },
-	{ "rx_bytes" },
+	{ "rx_bytes" }, /* includes Ethernet FCS CRC */
 	{ "tx_pause" },
 	{ "rx_pause" },
 	{ "rx_drop_frame" },
@@ -649,7 +649,7 @@
 };
 
 struct nv_ethtool_stats {
-	u64 tx_bytes;
+	u64 tx_bytes; /* should be ifconfig->tx_bytes + 4*tx_packets */
 	u64 tx_zero_rexmt;
 	u64 tx_one_rexmt;
 	u64 tx_many_rexmt;
@@ -670,14 +670,14 @@
 	u64 rx_unicast;
 	u64 rx_multicast;
 	u64 rx_broadcast;
-	u64 rx_packets;
+	u64 rx_packets; /* should be ifconfig->rx_packets */
 	u64 rx_errors_total;
 	u64 tx_errors_total;
 
 	/* version 2 stats */
 	u64 tx_deferral;
-	u64 tx_packets;
-	u64 rx_bytes;
+	u64 tx_packets; /* should be ifconfig->tx_packets */
+	u64 rx_bytes;   /* should be ifconfig->rx_bytes + 4*rx_packets */
 	u64 tx_pause;
 	u64 rx_pause;
 	u64 rx_drop_frame;
@@ -1706,10 +1706,17 @@
 	if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) {
 		nv_get_hw_stats(dev);
 
+		/*
+		 * Note: because HW stats are not always available and
+		 * for consistency reasons, the following ifconfig
+		 * stats are managed by software: rx_bytes, tx_bytes,
+		 * rx_packets and tx_packets. The related hardware
+		 * stats reported by ethtool should be equivalent to
+		 * these ifconfig stats, with 4 additional bytes per
+		 * packet (Ethernet FCS CRC).
+		 */
+
 		/* copy to net_device stats */
-		dev->stats.tx_packets = np->estats.tx_packets;
-		dev->stats.rx_bytes = np->estats.rx_bytes;
-		dev->stats.tx_bytes = np->estats.tx_bytes;
 		dev->stats.tx_fifo_errors = np->estats.tx_fifo_errors;
 		dev->stats.tx_carrier_errors = np->estats.tx_carrier_errors;
 		dev->stats.rx_crc_errors = np->estats.rx_crc_errors;
@@ -2380,6 +2387,9 @@
 				if (flags & NV_TX_ERROR) {
 					if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK))
 						nv_legacybackoff_reseed(dev);
+				} else {
+					dev->stats.tx_packets++;
+					dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
 				}
 				dev_kfree_skb_any(np->get_tx_ctx->skb);
 				np->get_tx_ctx->skb = NULL;
@@ -2390,6 +2400,9 @@
 				if (flags & NV_TX2_ERROR) {
 					if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK))
 						nv_legacybackoff_reseed(dev);
+				} else {
+					dev->stats.tx_packets++;
+					dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
 				}
 				dev_kfree_skb_any(np->get_tx_ctx->skb);
 				np->get_tx_ctx->skb = NULL;
@@ -2429,6 +2442,9 @@
 					else
 						nv_legacybackoff_reseed(dev);
 				}
+			} else {
+				dev->stats.tx_packets++;
+				dev->stats.tx_bytes += np->get_tx_ctx->skb->len;
 			}
 
 			dev_kfree_skb_any(np->get_tx_ctx->skb);
@@ -2678,6 +2694,7 @@
 		skb->protocol = eth_type_trans(skb, dev);
 		napi_gro_receive(&np->napi, skb);
 		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += len;
 next_pkt:
 		if (unlikely(np->get_rx.orig++ == np->last_rx.orig))
 			np->get_rx.orig = np->first_rx.orig;
@@ -2761,6 +2778,7 @@
 			}
 			napi_gro_receive(&np->napi, skb);
 			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += len;
 		} else {
 			dev_kfree_skb(skb);
 		}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
index 9c075ea..9cb5f91 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
@@ -18,8 +18,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  */
 
-#include <linux/module.h>	/* for __MODULE_STRING */
 #include "pch_gbe.h"
+#include <linux/module.h>	/* for __MODULE_STRING */
 
 #define OPTION_UNSET   -1
 #define OPTION_DISABLED 0
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index 1fc01ca..4bf68cf 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -940,7 +940,7 @@
 	iowrite16(lp->mcr0, ioaddr + MCR0);
 
 	/* Fill the MAC hash tables with their values */
-	if (lp->mcr0 && MCR0_HASH_EN) {
+	if (lp->mcr0 & MCR0_HASH_EN) {
 		iowrite16(hash_table[0], ioaddr + MAR0);
 		iowrite16(hash_table[1], ioaddr + MAR1);
 		iowrite16(hash_table[2], ioaddr + MAR2);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 92b45f0..6f06aa1 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1292,7 +1292,7 @@
 		netif_carrier_off(dev);
 		netif_info(tp, ifdown, dev, "link down\n");
 		if (pm)
-			pm_schedule_suspend(&tp->pci_dev->dev, 100);
+			pm_schedule_suspend(&tp->pci_dev->dev, 5000);
 	}
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index d2be42a..8843071 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1937,6 +1937,7 @@
 {
 	struct smsc911x_data *pdata = netdev_priv(dev);
 	unsigned int byte_test;
+	unsigned int to = 100;
 
 	SMSC_TRACE(pdata, probe, "Driver Parameters:");
 	SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",
@@ -1952,6 +1953,17 @@
 		return -ENODEV;
 	}
 
+	/*
+	 * poll the READY bit in PMT_CTRL. Any other access to the device is
+	 * forbidden while this bit isn't set. Try for 100ms
+	 */
+	while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+		udelay(1000);
+	if (to == 0) {
+		pr_err("Device not READY in 100ms aborting\n");
+		return -ENODEV;
+	}
+
 	/* Check byte ordering */
 	byte_test = smsc911x_reg_read(pdata, BYTE_TEST);
 	SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index da66ac5..4d5402a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -39,10 +39,11 @@
 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);
-	limit = 15000;
+	limit = 10;
 	while (limit--) {
 		if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
 			break;
+		mdelay(10);
 	}
 	if (limit < 0)
 		return -EBUSY;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 627f656..bc17fd0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -41,10 +41,11 @@
 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);
-	limit = 15000;
+	limit = 10;
 	while (limit--) {
 		if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
 			break;
+		mdelay(10);
 	}
 	if (limit < 0)
 		return -EBUSY;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9bafa6c..a140a8f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -72,7 +72,6 @@
 	spinlock_t lock;
 	spinlock_t tx_lock;
 	int wolopts;
-	int wolenabled;
 	int wol_irq;
 #ifdef CONFIG_STMMAC_TIMER
 	struct stmmac_timer *tm;
@@ -80,6 +79,7 @@
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_counters mmc;
 	struct dma_features dma_cap;
+	int hw_cap_support;
 };
 
 extern int stmmac_mdio_unregister(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index e8eff09..0395f9e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -430,6 +430,12 @@
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 support = WAKE_MAGIC | WAKE_UCAST;
 
+	/* By default almost all GMAC devices support the WoL via
+	 * magic frame but we can disable it if the HW capability
+	 * register shows no support for pmt_magic_frame. */
+	if ((priv->hw_cap_support) && (!priv->dma_cap.pmt_magic_frame))
+		wol->wolopts &= ~WAKE_MAGIC;
+
 	if (!device_can_wakeup(priv->device))
 		return -EINVAL;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 20546bb..8ea770a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -321,12 +321,10 @@
 	}
 
 	/* Stop Advertising 1000BASE Capability if interface is not GMII */
-	if ((interface) && ((interface == PHY_INTERFACE_MODE_MII) ||
-	    (interface == PHY_INTERFACE_MODE_RMII))) {
-		phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
-				      SUPPORTED_Asym_Pause);
-		phydev->advertising = phydev->supported;
-	}
+	if ((interface == PHY_INTERFACE_MODE_MII) ||
+	    (interface == PHY_INTERFACE_MODE_RMII))
+		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
+					 SUPPORTED_1000baseT_Full);
 
 	/*
 	 * Broken HW is sometimes missing the pull-up resistor on the
@@ -807,8 +805,29 @@
 	return 0;
 }
 
-/* New GMAC chips support a new register to indicate the
- * presence of the optional feature/functions.
+/**
+ * stmmac_selec_desc_mode
+ * @dev : device pointer
+ * Description: select the Enhanced/Alternate or Normal descriptors */
+static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
+{
+	if (priv->plat->enh_desc) {
+		pr_info(" Enhanced/Alternate descriptors\n");
+		priv->hw->desc = &enh_desc_ops;
+	} else {
+		pr_info(" Normal descriptors\n");
+		priv->hw->desc = &ndesc_ops;
+	}
+}
+
+/**
+ * stmmac_get_hw_features
+ * @priv : private device pointer
+ * Description:
+ *  new GMAC chip generations have a new register to indicate the
+ *  presence of the optional feature/functions.
+ *  This can be also used to override the value passed through the
+ *  platform and necessary for old MAC10/100 and GMAC chips.
  */
 static int stmmac_get_hw_features(struct stmmac_priv *priv)
 {
@@ -829,7 +848,7 @@
 			(hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
 		priv->dma_cap.pmt_magic_frame =
 			(hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
-		/*MMC*/
+		/* MMC */
 		priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
 		/* IEEE 1588-2002*/
 		priv->dma_cap.time_stamp =
@@ -857,8 +876,7 @@
 		priv->dma_cap.enh_desc =
 			(hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
 
-	} else
-		pr_debug("\tNo HW DMA feature register supported");
+	}
 
 	return hw_cap;
 }
@@ -913,6 +931,44 @@
 		goto open_error;
 	}
 
+	stmmac_get_synopsys_id(priv);
+
+	priv->hw_cap_support = stmmac_get_hw_features(priv);
+
+	if (priv->hw_cap_support) {
+		pr_info(" Support DMA HW capability register");
+
+		/* We can override some gmac/dma configuration fields: e.g.
+		 * enh_desc, tx_coe (e.g. that are passed through the
+		 * platform) with the values from the HW capability
+		 * register (if supported).
+		 */
+		priv->plat->enh_desc = priv->dma_cap.enh_desc;
+		priv->plat->tx_coe = priv->dma_cap.tx_coe;
+		priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+
+		/* By default disable wol on magic frame if not supported */
+		if (!priv->dma_cap.pmt_magic_frame)
+			priv->wolopts &= ~WAKE_MAGIC;
+
+	} else
+		pr_info(" No HW DMA feature register supported");
+
+	/* Select the enhnaced/normal descriptor structures */
+	stmmac_selec_desc_mode(priv);
+
+	/* PMT module is not integrated in all the MAC devices. */
+	if (priv->plat->pmt) {
+		pr_info(" Remote wake-up capable\n");
+		device_set_wakeup_capable(priv->device, 1);
+	}
+
+	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+	if (priv->rx_coe)
+		pr_info(" Checksum Offload Engine supported\n");
+	if (priv->plat->tx_coe)
+		pr_info(" Checksum insertion supported\n");
+
 	/* Create and initialize the TX/RX descriptors chains. */
 	priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
 	priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
@@ -935,15 +991,6 @@
 	/* Initialize the MAC Core */
 	priv->hw->mac->core_init(priv->ioaddr);
 
-	stmmac_get_synopsys_id(priv);
-
-	stmmac_get_hw_features(priv);
-
-	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
-	if (priv->rx_coe)
-		pr_info("stmmac: Rx Checksum Offload Engine supported\n");
-	if (priv->plat->tx_coe)
-		pr_info("\tTX Checksum insertion supported\n");
 	netdev_update_features(dev);
 
 	/* Request the IRQ lines */
@@ -1489,9 +1536,7 @@
 	if (!priv->phydev)
 		return -EINVAL;
 
-	spin_lock(&priv->lock);
 	ret = phy_mii_ioctl(priv->phydev, rq, cmd);
-	spin_unlock(&priv->lock);
 
 	return ret;
 }
@@ -1558,7 +1603,7 @@
 	struct net_device *dev = seq->private;
 	struct stmmac_priv *priv = netdev_priv(dev);
 
-	if (!stmmac_get_hw_features(priv)) {
+	if (!priv->hw_cap_support) {
 		seq_printf(seq, "DMA HW features not supported\n");
 		return 0;
 	}
@@ -1766,12 +1811,6 @@
 	if (!device)
 		return -ENOMEM;
 
-	if (priv->plat->enh_desc) {
-		device->desc = &enh_desc_ops;
-		pr_info("\tEnhanced descriptor structure\n");
-	} else
-		device->desc = &ndesc_ops;
-
 	priv->hw = device;
 	priv->hw->ring = &ring_mode_ops;
 
@@ -1845,11 +1884,6 @@
 
 	priv->ioaddr = addr;
 
-	/* PMT module is not integrated in all the MAC devices. */
-	if (plat_dat->pmt) {
-		pr_info("\tPMT module supported\n");
-		device_set_wakeup_capable(&pdev->dev, 1);
-	}
 	/*
 	 * On some platforms e.g. SPEAr the wake up irq differs from the mac irq
 	 * The external wake up irq can be passed through the platform code
@@ -1862,7 +1896,6 @@
 	if (priv->wol_irq == -ENXIO)
 		priv->wol_irq = ndev->irq;
 
-
 	platform_set_drvdata(pdev, ndev);
 
 	/* Set the I/O base addr */
@@ -1875,7 +1908,7 @@
 			goto out_free_ndev;
 	}
 
-	/* MAC HW revice detection */
+	/* MAC HW device detection */
 	ret = stmmac_mac_device_setup(ndev);
 	if (ret < 0)
 		goto out_plat_exit;
@@ -1978,12 +2011,13 @@
 	if (!ndev || !netif_running(ndev))
 		return 0;
 
+	if (priv->phydev)
+		phy_stop(priv->phydev);
+
 	spin_lock(&priv->lock);
 
 	netif_device_detach(ndev);
 	netif_stop_queue(ndev);
-	if (priv->phydev)
-		phy_stop(priv->phydev);
 
 #ifdef CONFIG_STMMAC_TIMER
 	priv->tm->timer_stop();
@@ -2041,12 +2075,13 @@
 #endif
 	napi_enable(&priv->napi);
 
-	if (priv->phydev)
-		phy_start(priv->phydev);
-
 	netif_start_queue(ndev);
 
 	spin_unlock(&priv->lock);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index c517dac..cf14ab9 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -2637,7 +2637,7 @@
 	sbus_dp = op->dev.parent->of_node;
 
 	/* We can match PCI devices too, do not accept those here. */
-	if (strcmp(sbus_dp->name, "sbus"))
+	if (strcmp(sbus_dp->name, "sbus") && strcmp(sbus_dp->name, "sbi"))
 		return err;
 
 	if (is_qfe) {
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index caf3659..2681b538 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -114,6 +114,7 @@
 		return;
 	temac_iow(lp, XTE_LSW0_OFFSET, value);
 	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+	temac_indirect_busywait(lp);
 }
 
 /**
@@ -203,6 +204,9 @@
 	struct temac_local *lp = netdev_priv(ndev);
 	int i;
 
+	/* Reset Local Link (DMA) */
+	lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+
 	for (i = 0; i < RX_BD_NUM; i++) {
 		if (!lp->rx_skb[i])
 			break;
@@ -860,6 +864,8 @@
 		phy_start(lp->phy_dev);
 	}
 
+	temac_device_reset(ndev);
+
 	rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
 	if (rc)
 		goto err_tx_irq;
@@ -867,7 +873,6 @@
 	if (rc)
 		goto err_rx_irq;
 
-	temac_device_reset(ndev);
 	return 0;
 
  err_rx_irq:
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
index 7393eb7..95eb34f 100644
--- a/drivers/net/hippi/Kconfig
+++ b/drivers/net/hippi/Kconfig
@@ -36,4 +36,4 @@
 	  kernel code or by user space programs. Say Y here only if you have
 	  the memory.
 
-endif /* HIPPI */
+endif # HIPPI
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index e81e22e..e6fed4d 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -36,7 +36,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/slab.h>
 
-#define DRIVER_VERSION "26-Sep-2011"
+#define DRIVER_VERSION "08-Nov-2011"
 #define DRIVER_NAME "asix"
 
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
@@ -163,7 +163,7 @@
 #define MARVELL_CTRL_TXDELAY	0x0002
 #define MARVELL_CTRL_RXDELAY	0x0080
 
-#define	PHY_MODE_RTL8211CL	0x0004
+#define	PHY_MODE_RTL8211CL	0x000C
 
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
@@ -652,9 +652,17 @@
 {
 	int phy_reg;
 	u32 phy_id;
+	int i;
 
-	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
-	if (phy_reg < 0)
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
 		return 0;
 
 	phy_id = (phy_reg & 0xffff) << 16;
@@ -1075,7 +1083,7 @@
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
+	int ret, embd_phy;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	u8 buf[ETH_ALEN];
 	u32 phyid;
@@ -1100,16 +1108,36 @@
 	dev->mii.reg_num_mask = 0x1f;
 	dev->mii.phy_id = asix_get_phy_addr(dev);
 
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
-
 	dev->net->netdev_ops = &ax88772_netdev_ops;
 	dev->net->ethtool_ops = &ax88772_ethtool_ops;
 
-	ret = ax88772_reset(dev);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+	/* Reset the PHY to normal operation mode */
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		dbg("Select PHY #1 failed: %d", ret);
+		return ret;
+	}
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
 	if (ret < 0)
 		return ret;
 
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
+	if (ret < 0)
+		return ret;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
 		/* hard_mtu  is still the default - the device does not support
@@ -1220,6 +1248,7 @@
 	__le16 eeprom;
 	u8 status;
 	int gpio0 = 0;
+	u32 phyid;
 
 	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
 	dbg("GPIO Status: 0x%04x", status);
@@ -1235,12 +1264,13 @@
 		data->ledmode = 0;
 		gpio0 = 1;
 	} else {
-		data->phymode = le16_to_cpu(eeprom) & 7;
+		data->phymode = le16_to_cpu(eeprom) & 0x7F;
 		data->ledmode = le16_to_cpu(eeprom) >> 8;
 		gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
 	}
 	dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
 
+	/* Power up external GigaPHY through AX88178 GPIO pin */
 	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
 		asix_write_gpio(dev, 0x003c, 30);
@@ -1252,6 +1282,13 @@
 		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
 	}
 
+	/* Read PHYID register *AFTER* powering up PHY */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
+	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
 	asix_sw_reset(dev, 0);
 	msleep(150);
 
@@ -1396,7 +1433,6 @@
 {
 	int ret;
 	u8 buf[ETH_ALEN];
-	u32 phyid;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 
 	data->eeprom_len = AX88772_EEPROM_LEN;
@@ -1423,12 +1459,12 @@
 	dev->net->netdev_ops = &ax88178_netdev_ops;
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
+	/* Blink LEDS so users know driver saw dongle */
+	asix_sw_reset(dev, 0);
+	msleep(150);
 
-	ret = ax88178_reset(dev);
-	if (ret < 0)
-		return ret;
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index c924ea2..99ed6eb 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -567,7 +567,7 @@
 {
 	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long)&wwan_info,
+	.driver_info = 0,
 },
 
 /*
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index d43db32..9c26c63 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -144,10 +144,11 @@
 	}
 
 	frame = (struct vl600_frame_hdr *) buf->data;
-	/* NOTE: Should check that frame->magic == 0x53544448?
-	 * Otherwise if we receive garbage at the beginning of the frame
-	 * we may end up allocating a huge buffer and saving all the
-	 * future incoming data into it.  */
+	/* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+	 * otherwise we may run out of memory w/a bad packet */
+	if (ntohl(frame->magic) != 0x53544448 &&
+			ntohl(frame->magic) != 0x44544d48)
+		goto error;
 
 	if (buf->len < sizeof(*frame) ||
 			buf->len != le32_to_cpup(&frame->len)) {
@@ -296,6 +297,11 @@
 	 * overwrite the remaining fields.
 	 */
 	packet = (struct vl600_pkt_hdr *) skb->data;
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Since this modem only supports IPv4 and IPv6, just set all
+	 * frames to 0x0800 (ETH_P_IP)
+	 */
+	packet->h_proto = htons(ETH_P_IP);
 	memset(&packet->dummy, 0, sizeof(packet->dummy));
 	packet->len = cpu_to_le32(orig_len);
 
@@ -308,21 +314,12 @@
 	if (skb->len < full_len) /* Pad */
 		skb_put(skb, full_len - skb->len);
 
-	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
-	 * Check if this is an IPv6 packet, and set the ethertype
-	 * to 0x800
-	 */
-	if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) {
-		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08;
-		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0;
-	}
-
 	return skb;
 }
 
 static const struct driver_info	vl600_info = {
 	.description	= "LG VL600 modem",
-	.flags		= FLAG_ETHER | FLAG_RX_ASSEMBLE,
+	.flags		= FLAG_RX_ASSEMBLE | FLAG_WWAN,
 	.bind		= vl600_bind,
 	.unbind		= vl600_unbind,
 	.status		= usbnet_cdc_status,
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 22a7cf9..a5b9b12 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -51,6 +51,7 @@
 #define USB_VENDOR_ID_SMSC		(0x0424)
 #define USB_PRODUCT_ID_LAN7500		(0x7500)
 #define USB_PRODUCT_ID_LAN7505		(0x7505)
+#define RXW_PADDING			2
 
 #define check_warn(ret, fmt, args...) \
 	({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
@@ -1088,13 +1089,13 @@
 
 		memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
 		le32_to_cpus(&rx_cmd_b);
-		skb_pull(skb, 4 + NET_IP_ALIGN);
+		skb_pull(skb, 4 + RXW_PADDING);
 
 		packet = skb->data;
 
 		/* get the packet length */
-		size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
-		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
+		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
 
 		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
 			netif_dbg(dev, rx_err, dev->net,
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 85fa9cc..65ecb5b 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -254,6 +254,8 @@
 	int r;
 
 	sband = wiphy->bands[IEEE80211_BAND_2GHZ];
+	if (!sband)
+		return;
 
 	/*
 	 * If no country IE has been received always enable active scan
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 58ea0e5..5f77cbe 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -175,6 +175,7 @@
 	}
 }
 
+/* TODO: verify if needed for SSLPN or LCN  */
 static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate)
 {
 	const struct b43_phy *phy = &dev->phy;
@@ -256,6 +257,9 @@
 	unsigned int plcp_fragment_len;
 	u32 mac_ctl = 0;
 	u16 phy_ctl = 0;
+	bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP ||
+			      phy->type == B43_PHYTYPE_N ||
+			      phy->type == B43_PHYTYPE_HT);
 	u8 extra_ft = 0;
 	struct ieee80211_rate *txrate;
 	struct ieee80211_tx_rate *rates;
@@ -531,7 +535,7 @@
 			extra_ft |= B43_TXH_EFT_RTSFB_CCK;
 
 		if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS &&
-		    phy->type == B43_PHYTYPE_N) {
+		    fill_phy_ctl1) {
 			txhdr->phy_ctl1_rts = cpu_to_le16(
 				b43_generate_tx_phy_ctl1(dev, rts_rate));
 			txhdr->phy_ctl1_rts_fb = cpu_to_le16(
@@ -552,7 +556,7 @@
 		break;
 	}
 
-	if (phy->type == B43_PHYTYPE_N) {
+	if (fill_phy_ctl1) {
 		txhdr->phy_ctl1 =
 			cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate));
 		txhdr->phy_ctl1_fb =
@@ -736,7 +740,14 @@
 
 	/* Link quality statistics */
 	switch (chanstat & B43_RX_CHAN_PHYTYPE) {
+	case B43_PHYTYPE_HT:
+		/* TODO: is max the right choice? */
+		status.signal = max_t(__s8,
+			max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1),
+			rxhdr->phy_ht_power2);
+		break;
 	case B43_PHYTYPE_N:
+		/* Broadcom has code for min and avg, but always uses max */
 		if (rxhdr->power0 == 16 || rxhdr->power0 == 32)
 			status.signal = max(rxhdr->power1, rxhdr->power2);
 		else
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 16c514d..98d9074 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -249,6 +249,12 @@
 		} __packed;
 	} __packed;
 	union {
+		/* HT-PHY */
+		struct {
+			PAD_BYTES(1);
+			__s8 phy_ht_power0;
+		} __packed;
+
 		/* RSSI for N-PHYs */
 		struct {
 			__s8 power2;
@@ -257,7 +263,15 @@
 
 		__le16 phy_status2;	/* PHY RX Status 2 */
 	} __packed;
-	__le16 phy_status3;	/* PHY RX Status 3 */
+	union {
+		/* HT-PHY */
+		struct {
+			__s8 phy_ht_power1;
+			__s8 phy_ht_power2;
+		} __packed;
+
+		__le16 phy_status3;	/* PHY RX Status 3 */
+	} __packed;
 	union {
 		/* Tested with 598.314, 644.1001 and 666.2 */
 		struct {
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
index b56a302..6ebec8f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
@@ -358,13 +358,14 @@
 
 static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags)
 {
-	uint dmactrlflags = di->dma.dmactrlflags;
+	uint dmactrlflags;
 
 	if (di == NULL) {
-		DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name));
+		DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n"));
 		return 0;
 	}
 
+	dmactrlflags = di->dma.dmactrlflags;
 	dmactrlflags &= ~mask;
 	dmactrlflags |= flags;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index da34110..ce91898 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -990,29 +990,16 @@
 	return 0;
 }
 
-static void iwl_trans_pcie_disable_sync_irq(struct iwl_trans *trans)
+static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 {
 	unsigned long flags;
-	struct iwl_trans_pcie *trans_pcie =
-		IWL_TRANS_GET_PCIE_TRANS(trans);
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
+	/* tell the device to stop sending interrupts */
 	spin_lock_irqsave(&trans->shrd->lock, flags);
 	iwl_disable_interrupts(trans);
 	spin_unlock_irqrestore(&trans->shrd->lock, flags);
 
-	/* wait to make sure we flush pending tasklet*/
-	synchronize_irq(bus(trans)->irq);
-	tasklet_kill(&trans_pcie->irq_tasklet);
-}
-
-static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
-{
-	/* stop and reset the on-board processor */
-	iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/* tell the device to stop sending interrupts */
-	iwl_trans_pcie_disable_sync_irq(trans);
-
 	/* device going down, Stop using ICT table */
 	iwl_disable_ict(trans);
 
@@ -1039,6 +1026,20 @@
 
 	/* Stop the device, and put it in low power state */
 	iwl_apm_stop(priv(trans));
+
+	/* Upon stop, the APM issues an interrupt if HW RF kill is set.
+	 * Clean again the interrupt here
+	 */
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+	iwl_disable_interrupts(trans);
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+	/* wait to make sure we flush pending tasklet*/
+	synchronize_irq(bus(trans)->irq);
+	tasklet_kill(&trans_pcie->irq_tasklet);
+
+	/* stop and reset the on-board processor */
+	iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 }
 
 static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 4fcd653..a7f1ab2 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -634,7 +634,7 @@
 			if (channel &&
 			    !(channel->flags & IEEE80211_CHAN_DISABLED))
 				cfg80211_inform_bss(wiphy, channel,
-					bssid, le64_to_cpu(*(__le64 *)tsfdesc),
+					bssid, get_unaligned_le64(tsfdesc),
 					capa, intvl, ie, ielen,
 					LBS_SCAN_RSSI_TO_MBM(rssi),
 					GFP_KERNEL);
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 11b69b3..728baa4 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -995,6 +995,7 @@
 		spin_unlock_irqrestore(&card->buffer_lock, flags);
 		break;
 	default:
+		kfree(packet);
 		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
 			   type);
 		err = -EINVAL;
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index dae8dbb..8d3ab37 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -819,8 +819,10 @@
 			wildcard_ssid_tlv->header.len = cpu_to_le16(
 				(u16) (ssid_len + sizeof(wildcard_ssid_tlv->
 							 max_ssid_length)));
-			wildcard_ssid_tlv->max_ssid_length =
-				user_scan_in->ssid_list[ssid_idx].max_len;
+
+			/* max_ssid_length = 0 tells firmware to perform
+			   specific scan for the SSID filled */
+			wildcard_ssid_tlv->max_ssid_length = 0;
 
 			memcpy(wildcard_ssid_tlv->ssid,
 			       user_scan_in->ssid_list[ssid_idx].ssid,
@@ -1469,7 +1471,7 @@
 			       s32 rssi, const u8 *ie_buf, size_t ie_len,
 			       u16 beacon_period, u16 cap_info_bitmap, u8 band)
 {
-	struct mwifiex_bssdescriptor *bss_desc = NULL;
+	struct mwifiex_bssdescriptor *bss_desc;
 	int ret;
 	unsigned long flags;
 	u8 *beacon_ie;
@@ -1484,6 +1486,7 @@
 
 	beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL);
 	if (!beacon_ie) {
+		kfree(bss_desc);
 		dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n");
 		return -ENOMEM;
 	}
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index f156579..3778763 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -919,6 +919,7 @@
 	{ USB_DEVICE(0x050d, 0x935b) },
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00e8) },
+	{ USB_DEVICE(0x0411, 0x0158) },
 	{ USB_DEVICE(0x0411, 0x016f) },
 	{ USB_DEVICE(0x0411, 0x01a2) },
 	/* Corega */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 2ec5c00..99ff12d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -943,6 +943,7 @@
 	 * Powersaving work
 	 */
 	struct delayed_work autowakeup_work;
+	struct work_struct sleep_work;
 
 	/*
 	 * Data queue arrays for RX, TX, Beacon and ATIM.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index e1fb2a8..edd317f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -465,6 +465,23 @@
 	return NULL;
 }
 
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, sleep_work);
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Check again is powersaving is enabled, to prevent races from delayed
+	 * work execution.
+	 */
+	if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+				 IEEE80211_CONF_CHANGE_PS);
+}
+
 static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
 				      struct sk_buff *skb,
 				      struct rxdone_entry_desc *rxdesc)
@@ -512,8 +529,7 @@
 	cam |= (tim_ie->bitmap_ctrl & 0x01);
 
 	if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
-		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
-				 IEEE80211_CONF_CHANGE_PS);
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
 }
 
 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
@@ -1141,6 +1157,7 @@
 
 	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
 	INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+	INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
 
 	/*
 	 * Let the driver probe the device to detect the capabilities.
@@ -1197,6 +1214,7 @@
 	 */
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+	cancel_work_sync(&rt2x00dev->sleep_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
 		del_timer_sync(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 128ccb7..fc29c67 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -559,7 +559,7 @@
 						break;
 					}
 				/* Fail if SSID isn't present in the filters */
-				if (j == req->n_ssids) {
+				if (j == cmd->n_ssids) {
 					ret = -EINVAL;
 					goto out_free;
 				}
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 6d3dd39..791270b 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -60,27 +60,27 @@
  */
 struct device_node *of_irq_find_parent(struct device_node *child)
 {
-	struct device_node *p, *c = child;
+	struct device_node *p;
 	const __be32 *parp;
 
-	if (!of_node_get(c))
+	if (!of_node_get(child))
 		return NULL;
 
 	do {
-		parp = of_get_property(c, "interrupt-parent", NULL);
+		parp = of_get_property(child, "interrupt-parent", NULL);
 		if (parp == NULL)
-			p = of_get_parent(c);
+			p = of_get_parent(child);
 		else {
 			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
 				p = of_node_get(of_irq_dflt_pic);
 			else
 				p = of_find_node_by_phandle(be32_to_cpup(parp));
 		}
-		of_node_put(c);
-		c = p;
+		of_node_put(child);
+		child = p;
 	} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
 
-	return (p == child) ? NULL : p;
+	return p;
 }
 
 /**
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b6f9749..f02b523 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -76,6 +76,7 @@
 
 config PCI_PRI
 	bool "PCI PRI support"
+	depends on PCI
 	select PCI_ATS
 	help
 	  PRI is the PCI Page Request Interface. It allows PCI devices that are
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 596172b..fce1c54 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -459,8 +459,17 @@
 {
 	acpi_status status;
 	unsigned long long tmp;
+	struct acpi_pci_root *root;
 	acpi_handle dummy_handle;
 
+	/*
+	 * We shouldn't use this bridge if PCIe native hotplug control has been
+	 * granted by the BIOS for it.
+	 */
+	root = acpi_pci_find_root(handle);
+	if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
+		return -ENODEV;
+
 	/* if the bridge doesn't have _STA, we assume it is always there */
 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
 	if (ACPI_SUCCESS(status)) {
@@ -1376,13 +1385,23 @@
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
+	struct acpi_pci_root *root;
 	int *count = (int *)context;
 
-	if (acpi_is_root_bridge(handle)) {
-		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-				handle_hotplug_event_bridge, NULL);
-			(*count)++;
-	}
+	if (!acpi_is_root_bridge(handle))
+		return AE_OK;
+
+	root = acpi_pci_find_root(handle);
+	if (!root)
+		return AE_OK;
+
+	if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)
+		return AE_OK;
+
+	(*count)++;
+	acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+				    handle_hotplug_event_bridge, NULL);
+
 	return AE_OK ;
 }
 
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 1e9c9aa..085dbb5 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -213,9 +213,6 @@
 		goto err_exit;
 	}
 
-	/* Wait for 1 second after checking link training status */
-	msleep(1000);
-
 	/* Check for a power fault */
 	if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) {
 		ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot));
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 96dc473..7b14148 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -280,6 +280,14 @@
         else
                 msleep(1000);
 
+	/*
+	 * Need to wait for 1000 ms after Data Link Layer Link Active
+	 * (DLLLA) bit reads 1b before sending configuration request.
+	 * We need it before checking Link Training (LT) bit becuase
+	 * LT is still set even after DLLLA bit is set on some platform.
+	 */
+	msleep(1000);
+
 	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
 	if (retval) {
 		ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
@@ -294,6 +302,16 @@
 		return retval;
 	}
 
+	/*
+	 * If the port supports Link speeds greater than 5.0 GT/s, we
+	 * must wait for 100 ms after Link training completes before
+	 * sending configuration request.
+	 */
+	if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT)
+		msleep(100);
+
+	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
 	return retval;
 }
 
@@ -484,7 +502,6 @@
 	u16 slot_cmd;
 	u16 cmd_mask;
 	u16 slot_status;
-	u16 lnk_status;
 	int retval = 0;
 
 	/* Clear sticky power-fault bit from previous power failures */
@@ -516,14 +533,6 @@
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 
-	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
-				__func__);
-		return retval;
-	}
-	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
-
 	return retval;
 }
 
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index aca972b..dd7e0c5 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -278,8 +278,8 @@
 
 static int is_shpc_capable(struct pci_dev *dev)
 {
-	if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
-						PCI_DEVICE_ID_AMD_GOLAM_7450))
+	if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450)
 		return 1;
 	if (!pci_find_capability(dev, PCI_CAP_ID_SHPC))
 		return 0;
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 36547f0..75ba231 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -944,8 +944,8 @@
 	ctrl->pci_dev = pdev;  /* pci_dev of the P2P bridge */
 	ctrl_dbg(ctrl, "Hotplug Controller:\n");
 
-	if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
-				PCI_DEVICE_ID_AMD_GOLAM_7450)) {
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) {
 		/* amd shpc driver doesn't use Base Offset; assume 0 */
 		ctrl->mmio_base = pci_resource_start(pdev, 0);
 		ctrl->mmio_size = pci_resource_len(pdev, 0);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index ef56644..e17e2f8 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -2,23 +2,17 @@
 # PINCTRL infrastructure and drivers
 #
 
-menuconfig PINCTRL
-	bool "PINCTRL Support"
+config PINCTRL
+	bool
 	depends on EXPERIMENTAL
-	help
-	  This enables the PINCTRL subsystem for controlling pins
-	  on chip packages, for example multiplexing pins on primarily
-	  PGA and BGA packages for systems on chip.
-
-	  If unsure, say N.
 
 if PINCTRL
 
+menu "Pin controllers"
+	depends on PINCTRL
+
 config PINMUX
 	bool "Support pinmux controllers"
-	help
-	  Say Y here if you want the pincontrol subsystem to handle pin
-	  multiplexing drivers.
 
 config DEBUG_PINCTRL
 	bool "Debug PINCTRL calls"
@@ -30,14 +24,12 @@
 	bool "CSR SiRFprimaII pinmux driver"
 	depends on ARCH_PRIMA2
 	select PINMUX
-	help
-	  Say Y here to enable the SiRFprimaII pinmux driver
 
 config PINMUX_U300
 	bool "U300 pinmux driver"
 	depends on ARCH_U300
 	select PINMUX
-	help
-	  Say Y here to enable the U300 pinmux driver
+
+endmenu
 
 endif
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f4e3d82..7f43cf8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -83,8 +83,10 @@
 	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL || RFKILL = n
-	depends on POWER_SUPPLY
 	depends on SERIO_I8042
+	select POWER_SUPPLY
+	select LEDS_CLASS
+	select NEW_LEDS
 	default n
 	---help---
 	This driver adds support for rfkill and backlight control to Dell
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index a43cfd9..d93e962 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -589,14 +589,14 @@
 	.update_status  = dell_send_intensity,
 };
 
-static void touchpad_led_on()
+static void touchpad_led_on(void)
 {
 	int command = 0x97;
 	char data = 1;
 	i8042_command(&data, command | 1 << 12);
 }
 
-static void touchpad_led_off()
+static void touchpad_led_off(void)
 {
 	int command = 0x97;
 	char data = 2;
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index d9fb729..fb73008 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -952,7 +952,7 @@
 	}
 
 	result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler,
-		IRQF_DISABLED, "vuart", &vuart_bus_priv);
+		0, "vuart", &vuart_bus_priv);
 
 	if (result) {
 		pr_debug("%s:%d: request_irq failed (%d)\n",
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index cc328dec..8c3f5ad 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -167,7 +167,7 @@
 		goto fail_close_device;
 	}
 
-	error = request_irq(dev->irq, handler, IRQF_DISABLED,
+	error = request_irq(dev->irq, handler, 0,
 			    dev->sbd.core.driver->name, dev);
 	if (error) {
 		dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n",
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 66d2d60..b552aae 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -664,10 +664,10 @@
 
 	switch (id) {
 	case TPS65910_REG_VDD1:
-		dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+		dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
 		if (dcdc_mult == 1)
 			dcdc_mult--;
-		vsel = (selector % VDD1_2_NUM_VOLTS) + 3;
+		vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
 
 		tps65910_modify_bits(pmic, TPS65910_VDD1,
 				(dcdc_mult << VDD1_VGAIN_SEL_SHIFT),
@@ -675,10 +675,10 @@
 		tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel);
 		break;
 	case TPS65910_REG_VDD2:
-		dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+		dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
 		if (dcdc_mult == 1)
 			dcdc_mult--;
-		vsel = (selector % VDD1_2_NUM_VOLTS) + 3;
+		vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
 
 		tps65910_modify_bits(pmic, TPS65910_VDD2,
 				(dcdc_mult << VDD2_VGAIN_SEL_SHIFT),
@@ -756,9 +756,9 @@
 	switch (id) {
 	case TPS65910_REG_VDD1:
 	case TPS65910_REG_VDD2:
-		mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+		mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
 		volt = VDD1_2_MIN_VOLT +
-				(selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET;
+				(selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET;
 		break;
 	case TPS65911_REG_VDDCTRL:
 		volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET);
@@ -947,6 +947,8 @@
 
 		if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) {
 			pmic->desc[i].ops = &tps65910_ops_dcdc;
+			pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE *
+							VDD1_2_NUM_VOLT_COARSE;
 		} else if (i == TPS65910_REG_VDD3) {
 			if (tps65910_chip_id(tps65910) == TPS65910)
 				pmic->desc[i].ops = &tps65910_ops_vdd3;
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index d335448..bb21f44 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -76,12 +76,15 @@
 /*
  * rtc_time's year contains the increment over 1900, but vRTC's YEAR
  * register can't be programmed to value larger than 0x64, so vRTC
- * driver chose to use 1960 (1970 is UNIX time start point) as the base,
+ * driver chose to use 1972 (1970 is UNIX time start point) as the base,
  * and does the translation at read/write time.
  *
- * Why not just use 1970 as the offset? it's because using 1960 will
+ * Why not just use 1970 as the offset? it's because using 1972 will
  * make it consistent in leap year setting for both vrtc and low-level
- * physical rtc devices.
+ * physical rtc devices. Then why not use 1960 as the offset? If we use
+ * 1960, for a device's first use, its YEAR register is 0 and the system
+ * year will be parsed as 1960 which is not a valid UNIX time and will
+ * cause many applications to fail mysteriously.
  */
 static int mrst_read_time(struct device *dev, struct rtc_time *time)
 {
@@ -99,10 +102,10 @@
 	time->tm_year = vrtc_cmos_read(RTC_YEAR);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	/* Adjust for the 1960/1900 */
-	time->tm_year += 60;
+	/* Adjust for the 1972/1900 */
+	time->tm_year += 72;
 	time->tm_mon--;
-	return RTC_24H;
+	return rtc_valid_tm(time);
 }
 
 static int mrst_set_time(struct device *dev, struct rtc_time *time)
@@ -119,9 +122,9 @@
 	min = time->tm_min;
 	sec = time->tm_sec;
 
-	if (yrs < 70 || yrs > 138)
+	if (yrs < 72 || yrs > 138)
 		return -EINVAL;
-	yrs -= 60;
+	yrs -= 72;
 
 	spin_lock_irqsave(&rtc_lock, flags);
 
diff --git a/drivers/rtc/rtc-puv3.c b/drivers/rtc/rtc-puv3.c
index b3eba3c..e4b6880 100644
--- a/drivers/rtc/rtc-puv3.c
+++ b/drivers/rtc/rtc-puv3.c
@@ -220,7 +220,7 @@
 	}
 }
 
-static int puv3_rtc_remove(struct platform_device *dev)
+static int __devexit puv3_rtc_remove(struct platform_device *dev)
 {
 	struct rtc_device *rtc = platform_get_drvdata(dev);
 
@@ -236,7 +236,7 @@
 	return 0;
 }
 
-static int puv3_rtc_probe(struct platform_device *pdev)
+static int __devinit puv3_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct resource *res;
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 43068fb..1b6d924 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -641,6 +641,8 @@
 
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
 		return -ENODATA;
+	if (OLDMEM_BASE)
+		return -ENODATA;
 
 	zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long));
 	debug_register_view(zcore_dbf, &debug_sprintf_view);
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index b77ae51..ec94f04 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1271,18 +1271,16 @@
 }
 
 /**
- * ap_schedule_poll_timer(): Schedule poll timer.
+ * __ap_schedule_poll_timer(): Schedule poll timer.
  *
  * Set up the timer to run the poll tasklet
  */
-static inline void ap_schedule_poll_timer(void)
+static inline void __ap_schedule_poll_timer(void)
 {
 	ktime_t hr_time;
 
 	spin_lock_bh(&ap_poll_timer_lock);
-	if (ap_using_interrupts() || ap_suspend_flag)
-		goto out;
-	if (hrtimer_is_queued(&ap_poll_timer))
+	if (hrtimer_is_queued(&ap_poll_timer) || ap_suspend_flag)
 		goto out;
 	if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
 		hr_time = ktime_set(0, poll_timeout);
@@ -1294,6 +1292,18 @@
 }
 
 /**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
+ * Set up the timer to run the poll tasklet
+ */
+static inline void ap_schedule_poll_timer(void)
+{
+	if (ap_using_interrupts())
+		return;
+	__ap_schedule_poll_timer();
+}
+
+/**
  * ap_poll_read(): Receive pending reply messages from an AP device.
  * @ap_dev: pointer to the AP device
  * @flags: pointer to control flags, bit 2^0 is set if another poll is
@@ -1374,8 +1384,9 @@
 			*flags |= 1;
 		*flags |= 2;
 		break;
-	case AP_RESPONSE_Q_FULL:
 	case AP_RESPONSE_RESET_IN_PROGRESS:
+		__ap_schedule_poll_timer();
+	case AP_RESPONSE_Q_FULL:
 		*flags |= 2;
 		break;
 	case AP_RESPONSE_MESSAGE_TOO_BIG:
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index fa80ba1..9b66d2d 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -4,7 +4,7 @@
 config LCS
 	def_tristate m
 	prompt "Lan Channel Station Interface"
-	depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
+	depends on CCW && NETDEVICES && (ETHERNET || TR || FDDI)
 	help
 	   Select this option if you want to use LCS networking on IBM System z.
 	   This device driver supports Token Ring (IEEE 802.5),
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index c28713d..863fc21 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -50,7 +50,7 @@
 #include "lcs.h"
 
 
-#if !defined(CONFIG_NET_ETHERNET) && \
+#if !defined(CONFIG_ETHERNET) && \
     !defined(CONFIG_TR) && !defined(CONFIG_FDDI)
 #error Cannot compile lcs.c without some net devices switched on.
 #endif
@@ -1634,7 +1634,7 @@
 	int rc;
 
 	LCS_DBF_TEXT(2, trace, "strtauto");
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
 	card->lan_type = LCS_FRAME_TYPE_ENET;
 	rc = lcs_send_startlan(card, LCS_INITIATOR_TCPIP);
 	if (rc == 0)
@@ -2166,7 +2166,7 @@
 		goto netdev_out;
 	}
 	switch (card->lan_type) {
-#ifdef CONFIG_NET_ETHERNET
+#ifdef CONFIG_ETHERNET
 	case LCS_FRAME_TYPE_ENET:
 		card->lan_type_trans = eth_type_trans;
 		dev = alloc_etherdev(0);
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 3251333..b6a6356 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1994,6 +1994,8 @@
 			   netiucv_setup_netdevice);
 	if (!dev)
 		return NULL;
+	if (dev_alloc_name(dev, dev->name) < 0)
+		goto out_netdev;
 
 	privptr = netdev_priv(dev);
 	privptr->fsm = init_fsm("netiucvdev", dev_state_names,
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index b77c65e..4abc79d 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -236,8 +236,7 @@
 #define QETH_IN_BUF_COUNT_MAX 128
 #define QETH_MAX_BUFFER_ELEMENTS(card) ((card)->qdio.in_buf_size >> 12)
 #define QETH_IN_BUF_REQUEUE_THRESHOLD(card) \
-		((card)->ssqd.qdioac1 & AC1_SIGA_INPUT_NEEDED ? 1 : \
-		 ((card)->qdio.in_buf_pool.buf_count / 2))
+		 ((card)->qdio.in_buf_pool.buf_count / 2)
 
 /* buffers we have to be behind before we get a PCI */
 #define QETH_PCI_THRESHOLD_A(card) ((card)->qdio.in_buf_pool.buf_count+1)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 8153443..fff57de 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -881,7 +881,6 @@
 void qeth_schedule_recovery(struct qeth_card *card)
 {
 	QETH_CARD_TEXT(card, 2, "startrec");
-	WARN_ON(1);
 	if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0)
 		schedule_work(&card->kernel_thread_starter);
 }
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index e4c1176..4d5307d 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2756,11 +2756,13 @@
 	struct neighbour *n = NULL;
 	struct dst_entry *dst;
 
+	rcu_read_lock();
 	dst = skb_dst(skb);
 	if (dst)
 		n = dst_get_neighbour(dst);
 	if (n) {
 		cast_type = n->type;
+		rcu_read_unlock();
 		if ((cast_type == RTN_BROADCAST) ||
 		    (cast_type == RTN_MULTICAST) ||
 		    (cast_type == RTN_ANYCAST))
@@ -2768,6 +2770,8 @@
 		else
 			return RTN_UNSPEC;
 	}
+	rcu_read_unlock();
+
 	/* try something else */
 	if (skb->protocol == ETH_P_IPV6)
 		return (skb_network_header(skb)[24] == 0xff) ?
@@ -2847,6 +2851,8 @@
 	}
 
 	hdr->hdr.l3.length = skb->len - sizeof(struct qeth_hdr);
+
+	rcu_read_lock();
 	dst = skb_dst(skb);
 	if (dst)
 		n = dst_get_neighbour(dst);
@@ -2893,6 +2899,7 @@
 				QETH_CAST_UNICAST | QETH_HDR_PASSTHRU;
 		}
 	}
+	rcu_read_unlock();
 }
 
 static inline void qeth_l3_hdr_csum(struct qeth_card *card,
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 0ea2fbf..d979bb2 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -335,10 +335,10 @@
 					QETH_IN_BUF_COUNT_MAX)
 				qeth_realloc_buffer_pool(card,
 					QETH_IN_BUF_COUNT_MAX);
-			break;
 		} else
 			rc = -EPERM;
-	default:   /* fall through */
+		break;
+	default:
 		rc = -EINVAL;
 	}
 out:
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 4aa76d6..705e13e 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
@@ -1109,6 +1110,9 @@
 		unique_id++;
 	}
 
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+			       PCIE_LINK_STATE_CLKPM);
+
 	error = pci_enable_device(pdev);
 	if (error)
 		goto out;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e76107b..865d452 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -3922,6 +3923,10 @@
 		dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
 		return -ENODEV;
 	}
+
+	pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+			       PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
 	err = pci_enable_device(h->pdev);
 	if (err) {
 		dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 8889b1b..4e041f6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2802,6 +2802,11 @@
 
 	if (ioc->is_driver_loading)
 		return;
+
+	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+	if (!fw_event)
+		return;
+
 	fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
 	fw_event->ioc = ioc;
 	_scsih_fw_event_add(ioc, fw_event);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 06bc2655..f85cfa6 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1409,6 +1409,8 @@
 
 	blk_start_request(req);
 
+	scmd_printk(KERN_INFO, cmd, "killing request\n");
+
 	sdev = cmd->device;
 	starget = scsi_target(sdev);
 	shost = sdev->host;
@@ -1490,7 +1492,6 @@
 	struct request *req;
 
 	if (!sdev) {
-		printk("scsi: killing requests for dead queue\n");
 		while ((req = blk_peek_request(q)) != NULL)
 			scsi_kill_request(req, q);
 		return;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 72273a0..b3c6d95 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -319,11 +319,7 @@
 	return sdev;
 
 out_device_destroy:
-	scsi_device_set_state(sdev, SDEV_DEL);
-	transport_destroy_device(&sdev->sdev_gendev);
-	put_device(&sdev->sdev_dev);
-	scsi_free_queue(sdev->request_queue);
-	put_device(&sdev->sdev_gendev);
+	__scsi_remove_device(sdev);
 out:
 	if (display_failure_msg)
 		printk(ALLOC_FAILURE_MSG, __func__);
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 24e6cec..67e272a 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -7,3 +7,11 @@
 obj-$(CONFIG_MAPLE)		+= maple/
 obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_GENERIC_GPIO)	+= pfc.o
+
+#
+# For the moment we only use this framework for ARM-based SH/R-Mobile
+# platforms and generic SH. SH-based SH-Mobile platforms are still using
+# an older framework that is pending up-porting, at which point this
+# special casing can go away.
+#
+obj-$(CONFIG_SUPERH)$(CONFIG_ARCH_SHMOBILE)	+= pm_runtime.o
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index dc8d022..db257a3 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -25,7 +25,6 @@
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/debugfs.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/sh_clk.h>
@@ -173,6 +172,26 @@
 	return clk_rate_round_helper(&div_range_round);
 }
 
+static long clk_rate_mult_range_iter(unsigned int pos,
+				      struct clk_rate_round_data *rounder)
+{
+	return clk_get_rate(rounder->arg) * pos;
+}
+
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+			       unsigned int mult_max, unsigned long rate)
+{
+	struct clk_rate_round_data mult_range_round = {
+		.min	= mult_min,
+		.max	= mult_max,
+		.func	= clk_rate_mult_range_iter,
+		.arg	= clk_get_parent(clk),
+		.rate	= rate,
+	};
+
+	return clk_rate_round_helper(&mult_range_round);
+}
+
 int clk_rate_table_find(struct clk *clk,
 			struct cpufreq_frequency_table *freq_table,
 			unsigned long rate)
@@ -205,9 +224,6 @@
 		list_add(&child->sibling, &parent->children);
 	child->parent = parent;
 
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
-
 	return 0;
 }
 
@@ -665,89 +681,6 @@
 subsys_initcall(clk_syscore_init);
 #endif
 
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->parent;
-	char s[255];
-	char *p = s;
-
-	p += sprintf(p, "%p", c);
-	d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dentry = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dentry);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dentry) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dentry) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clock_list, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
 static int __init clk_late_init(void)
 {
 	unsigned long flags;
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/drivers/sh/pm_runtime.c
similarity index 93%
rename from arch/arm/mach-shmobile/pm_runtime.c
rename to drivers/sh/pm_runtime.c
index bd5c6a3..afe9282 100644
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ b/drivers/sh/pm_runtime.c
@@ -1,7 +1,5 @@
 /*
- * arch/arm/mach-shmobile/pm_runtime.c
- *
- * Runtime PM support code for SuperH Mobile ARM
+ * Runtime PM support code
  *
  *  Copyright (C) 2009-2010 Magnus Damm
  *
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 79665e2..16d6a83 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -907,7 +907,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int __init atmel_spi_probe(struct platform_device *pdev)
+static int __devinit atmel_spi_probe(struct platform_device *pdev)
 {
 	struct resource		*regs;
 	int			irq;
@@ -1003,7 +1003,7 @@
 	return ret;
 }
 
-static int __exit atmel_spi_remove(struct platform_device *pdev)
+static int __devexit atmel_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master	*master = platform_get_drvdata(pdev);
 	struct atmel_spi	*as = spi_master_get_devdata(master);
@@ -1072,6 +1072,7 @@
 	},
 	.suspend	= atmel_spi_suspend,
 	.resume		= atmel_spi_resume,
+	.probe		= atmel_spi_probe,
 	.remove		= __exit_p(atmel_spi_remove),
 };
 module_platform_driver(atmel_spi_driver);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index f103e47..5559b22 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2184,6 +2184,12 @@
 		goto  err_clk_prep;
 	}
 
+	status = clk_enable(pl022->clk);
+	if (status) {
+		dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n");
+		goto err_no_clk_en;
+	}
+
 	/* Disable SSP */
 	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
 	       SSP_CR1(pl022->virtbase));
@@ -2237,6 +2243,8 @@
 
 	free_irq(adev->irq[0], pl022);
  err_no_irq:
+	clk_disable(pl022->clk);
+ err_no_clk_en:
 	clk_unprepare(pl022->clk);
  err_clk_prep:
 	clk_put(pl022->clk);
diff --git a/drivers/staging/et131x/Kconfig b/drivers/staging/et131x/Kconfig
index 9e1864c..8190f2a 100644
--- a/drivers/staging/et131x/Kconfig
+++ b/drivers/staging/et131x/Kconfig
@@ -1,6 +1,7 @@
 config ET131X
 	tristate "Agere ET-1310 Gigabit Ethernet support"
-	depends on PCI
+	depends on PCI && NET && NETDEVICES
+	select PHYLIB
 	default n
 	---help---
 	  This driver supports Agere ET-1310 ethernet adapters.
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index f5f44a0..0c1c6ca 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -4469,6 +4469,12 @@
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
+#define ET131X_PM_OPS (&et131x_pm_ops)
+#else
+#define ET131X_PM_OPS NULL
+#endif
+
 /* ISR functions */
 
 /**
@@ -5470,12 +5476,6 @@
 	return result;
 }
 
-static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
-#define ET131X_PM_OPS (&et131x_pm_ops)
-#else
-#define ET131X_PM_OPS NULL
-#endif
-
 static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = {
 	{ PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL},
 	{ PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL},
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index 326e967..2656409 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -242,6 +242,8 @@
 
 static int iio_event_getfd(struct iio_dev *indio_dev)
 {
+	int fd;
+
 	if (indio_dev->event_interface == NULL)
 		return -ENODEV;
 
@@ -252,9 +254,15 @@
 		return -EBUSY;
 	}
 	mutex_unlock(&indio_dev->event_interface->event_list_lock);
-	return anon_inode_getfd("iio:event",
+	fd = anon_inode_getfd("iio:event",
 				&iio_event_chrdev_fileops,
 				indio_dev->event_interface, O_RDONLY);
+	if (fd < 0) {
+		mutex_lock(&indio_dev->event_interface->event_list_lock);
+		clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags);
+		mutex_unlock(&indio_dev->event_interface->event_list_lock);
+	}
+	return fd;
 }
 
 static int __init iio_init(void)
diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c
index d335c7d..828526d 100644
--- a/drivers/staging/media/as102/as102_drv.c
+++ b/drivers/staging/media/as102/as102_drv.c
@@ -32,8 +32,8 @@
 #include "as102_fw.h"
 #include "dvbdev.h"
 
-int debug;
-module_param_named(debug, debug, int, 0644);
+int as102_debug;
+module_param_named(debug, as102_debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)");
 
 int dual_tuner;
diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h
index bcda635..fd33f5a 100644
--- a/drivers/staging/media/as102/as102_drv.h
+++ b/drivers/staging/media/as102/as102_drv.h
@@ -37,7 +37,8 @@
 #define DRIVER_FULL_NAME "Abilis Systems as10x usb driver"
 #define DRIVER_NAME "as10x_usb"
 
-extern int debug;
+extern int as102_debug;
+#define debug	as102_debug
 
 #define dprintk(debug, args...) \
 	do { if (debug) {	\
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index b445cd6..2542c37 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -275,7 +275,7 @@
 		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
-			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page.p) + fs->page_offset));
 			hw_buffer.s.size = fs->size;
 			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
 		}
diff --git a/drivers/staging/slicoss/Kconfig b/drivers/staging/slicoss/Kconfig
index 5cde96b..5c2a15b 100644
--- a/drivers/staging/slicoss/Kconfig
+++ b/drivers/staging/slicoss/Kconfig
@@ -1,6 +1,6 @@
 config SLICOSS
 	tristate "Alacritech Gigabit IS-NIC support"
-	depends on PCI && X86
+	depends on PCI && X86 && NET
 	default n
 	help
 	  This driver supports Alacritech's IS-NIC gigabit ethernet cards.
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 435f6fa..44fbeba 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -46,6 +46,7 @@
 
 	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
 		: "=r" (__c));
+	isb();
 
 	return __c;
 }
@@ -55,6 +56,7 @@
 	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
 		: /* no output register */
 		: "r" (c));
+	isb();
 }
 
 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 4cb0d0a..fc7bbba 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -66,14 +66,16 @@
 static int debug;
 module_param(debug, int, 0600);
 
-#define T1	(HZ/10)
-#define T2	(HZ/3)
-#define N2	3
+/* Defaults: these are from the specification */
+
+#define T1	10		/* 100mS */
+#define T2	34		/* 333mS */
+#define N2	3		/* Retry 3 times */
 
 /* Use long timers for testing at low speed with debug on */
 #ifdef DEBUG_TIMING
-#define T1	HZ
-#define T2	(2 * HZ)
+#define T1	100
+#define T2	200
 #endif
 
 /*
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 45c5758..705d2dc 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1581,7 +1581,7 @@
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
 	depends on PCI
 	select SERIAL_CORE
 	help
@@ -1589,12 +1589,12 @@
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config SERIAL_PCH_UART_CONSOLE
 	bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 6b844d4..bd85e32 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -228,7 +228,7 @@
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
 		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
-		if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+		if ((rs485conf->delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
@@ -304,7 +304,7 @@
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+		if ((atmel_port->rs485.delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port,
 					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
@@ -1228,7 +1228,7 @@
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+		if ((atmel_port->rs485.delay_rts_after_send) > 0)
 			UART_PUT_TTGR(port,
 					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
@@ -1442,16 +1442,6 @@
 		rs485conf->delay_rts_after_send = rs485_delay[1];
 		rs485conf->flags = 0;
 
-		if (rs485conf->delay_rts_before_send == 0 &&
-		    rs485conf->delay_rts_after_send == 0) {
-			rs485conf->flags |= SER_RS485_RTS_ON_SEND;
-		} else {
-			if (rs485conf->delay_rts_before_send)
-				rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND;
-			if (rs485conf->delay_rts_after_send)
-				rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
-		}
-
 		if (of_get_property(np, "rs485-rx-during-tx", NULL))
 			rs485conf->flags |= SER_RS485_RX_DURING_TX;
 
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index b743504..1dfba7b 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3234,9 +3234,8 @@
 		e100_disable_rx(info);
 		e100_enable_rx_irq(info);
 #endif
-		if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) &&
-			(info->rs485.delay_rts_before_send > 0))
-				msleep(info->rs485.delay_rts_before_send);
+		if (info->rs485.delay_rts_before_send > 0)
+			msleep(info->rs485.delay_rts_before_send);
 	}
 #endif /* CONFIG_ETRAX_RS485 */
 
@@ -3693,10 +3692,6 @@
 
 		rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
 		rs485data.flags = 0;
-		if (rs485data.delay_rts_before_send != 0)
-			rs485data.flags |= SER_RS485_RTS_BEFORE_SEND;
-		else
-			rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
 
 		if (rs485ctrl.enabled)
 			rs485data.flags |= SER_RS485_ENABLED;
@@ -4531,7 +4526,6 @@
 		/* Set sane defaults */
 		info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
 		info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
-		info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
 		info->rs485.delay_rts_before_send = 0;
 		info->rs485.flags &= ~(SER_RS485_ENABLED);
 #endif
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index 565f3fe..a9234ba8 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -884,7 +884,6 @@
 {
 	struct uart_hsu_port *up =
 			container_of(port, struct uart_hsu_port, port);
-	struct tty_struct *tty = port->state->port.tty;
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -907,8 +906,7 @@
 	}
 
 	/* CMSPAR isn't supported by this driver */
-	if (tty)
-		tty->termios->c_cflag &= ~CMSPAR;
+	termios->c_cflag &= ~CMSPAR;
 
 	if (termios->c_cflag & CSTOPB)
 		cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index b950d05..de0f613 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1,5 +1,5 @@
 /*
- *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  *This program is free software; you can redistribute it and/or modify
  *it under the terms of the GNU General Public License as published by
@@ -49,8 +49,8 @@
 
 /* Set the max number of UART port
  * Intel EG20T PCH: 4 port
- * OKI SEMICONDUCTOR ML7213 IOH: 3 port
- * OKI SEMICONDUCTOR ML7223 IOH: 2 port
+ * LAPIS Semiconductor ML7213 IOH: 3 port
+ * LAPIS Semiconductor ML7223 IOH: 2 port
 */
 #define PCH_UART_NR	4
 
@@ -265,6 +265,8 @@
 	pch_ml7213_uart2,
 	pch_ml7223_uart0,
 	pch_ml7223_uart1,
+	pch_ml7831_uart0,
+	pch_ml7831_uart1,
 };
 
 static struct pch_uart_driver_data drv_dat[] = {
@@ -277,6 +279,8 @@
 	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
 	[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
 	[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
 };
 
 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
@@ -638,6 +642,7 @@
 		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
 			__func__);
 		dma_release_channel(priv->chan_tx);
+		priv->chan_tx = NULL;
 		return;
 	}
 
@@ -1225,8 +1230,7 @@
 		dev_err(priv->port.dev,
 			"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
 
-	if (priv->use_dma_flag)
-		pch_free_dma(port);
+	pch_free_dma(port);
 
 	free_irq(priv->port.irq, priv);
 }
@@ -1290,6 +1294,7 @@
 	if (rtn)
 		goto out;
 
+	pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
 	/* Don't rewrite B0 */
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
@@ -1710,6 +1715,10 @@
 	 .driver_data = pch_ml7223_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
 	 .driver_data = pch_ml7223_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+	 .driver_data = pch_ml7831_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+	 .driver_data = pch_ml7831_uart1},
 	{0,},
 };
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1945c70..aff9d61 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -207,6 +207,25 @@
 	},
 
 	/*
+	 * Common SH-2(A) SCIF definitions for ports with FIFO data
+	 * count registers.
+	 */
+	[SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+		[SCSMR]		= { 0x00, 16 },
+		[SCBRR]		= { 0x04,  8 },
+		[SCSCR]		= { 0x08, 16 },
+		[SCxTDR]	= { 0x0c,  8 },
+		[SCxSR]		= { 0x10, 16 },
+		[SCxRDR]	= { 0x14,  8 },
+		[SCFCR]		= { 0x18, 16 },
+		[SCFDR]		= { 0x1c, 16 },
+		[SCTFDR]	= sci_reg_invalid,
+		[SCRFDR]	= sci_reg_invalid,
+		[SCSPTR]	= { 0x20, 16 },
+		[SCLSR]		= { 0x24, 16 },
+	},
+
+	/*
 	 * Common SH-3 SCIF definitions.
 	 */
 	[SCIx_SH3_SCIF_REGTYPE] = {
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 174db3b..24b95db 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -18,6 +18,7 @@
 #include <linux/bitops.h>
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
+#include <linux/ratelimit.h>
 
 /*
  *	This guards the refcounted line discipline lists. The lock
@@ -529,15 +530,16 @@
 /**
  *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
  *	@tty: tty to wait for
+ *	@timeout: for how long to wait at most
  *
  *	Wait for the line discipline to become idle. The discipline must
  *	have been halted for this to guarantee it remains idle.
  */
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
 {
-	int ret;
+	long ret;
 	ret = wait_event_timeout(tty_ldisc_idle,
-			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+			atomic_read(&tty->ldisc->users) == 1, timeout);
 	return ret > 0 ? 0 : -EBUSY;
 }
 
@@ -645,7 +647,7 @@
 
 	tty_ldisc_flush_works(tty);
 
-	retval = tty_ldisc_wait_idle(tty);
+	retval = tty_ldisc_wait_idle(tty, 5 * HZ);
 
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
@@ -742,8 +744,6 @@
 	if (IS_ERR(ld))
 		return -1;
 
-	WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
-
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
 	tty->ldisc = NULL;
@@ -818,7 +818,7 @@
 	tty_unlock();
 	cancel_work_sync(&tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
-
+retry:
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
 
@@ -827,6 +827,22 @@
 	   it means auditing a lot of other paths so this is
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
+		if (atomic_read(&tty->ldisc->users) != 1) {
+			char cur_n[TASK_COMM_LEN], tty_n[64];
+			long timeout = 3 * HZ;
+			tty_unlock();
+
+			while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+				timeout = MAX_SCHEDULE_TIMEOUT;
+				printk_ratelimited(KERN_WARNING
+					"%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+					__func__, get_task_comm(cur_n, current),
+					tty_name(tty, tty_n));
+			}
+			mutex_unlock(&tty->ldisc_mutex);
+			goto retry;
+		}
+
 		if (reset == 0) {
 
 			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6960715..e8c564a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -539,7 +539,6 @@
 {
 	int i;
 
-	mutex_lock(&open_mutex);
 	if (acm->dev) {
 		usb_autopm_get_interface(acm->control);
 		acm_set_control(acm, acm->ctrlout = 0);
@@ -551,14 +550,15 @@
 		acm->control->needs_remote_wakeup = 0;
 		usb_autopm_put_interface(acm->control);
 	}
-	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_hangup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	tty_port_hangup(&acm->port);
+	mutex_lock(&open_mutex);
 	acm_port_down(acm);
+	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -569,8 +569,9 @@
 	   shutdown */
 	if (!acm)
 		return;
+
+	mutex_lock(&open_mutex);
 	if (tty_port_close_start(&acm->port, tty, filp) == 0) {
-		mutex_lock(&open_mutex);
 		if (!acm->dev) {
 			tty_port_tty_set(&acm->port, NULL);
 			acm_tty_unregister(acm);
@@ -582,6 +583,7 @@
 	acm_port_down(acm);
 	tty_port_close_end(&acm->port, tty);
 	tty_port_tty_set(&acm->port, NULL);
+	mutex_unlock(&open_mutex);
 }
 
 static int acm_tty_write(struct tty_struct *tty,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 96f05b2..7978146 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -813,6 +813,12 @@
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
 		}
 
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
 		/* We can forget about a "removed" device when there's a
 		 * physical disconnect or the connect status changes.
 		 */
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d6a8d82..ecf12e1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -50,15 +50,42 @@
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C600 */
+	{ USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C905 */
+	{ USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C210 */
+	{ USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C260 */
+	{ USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C310 */
 	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C910 */
+	{ USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C160 */
+	{ USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C270 */
 	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Quickcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam E3500 */
+	{ USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Vision Pro */
+	{ USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index fa824cf..25dbd86 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1284,6 +1284,7 @@
 			int		ret;
 
 			dep->endpoint.maxpacket = 1024;
+			dep->endpoint.max_streams = 15;
 			dep->endpoint.ops = &dwc3_gadget_ep_ops;
 			list_add_tail(&dep->endpoint.ep_list,
 					&dwc->gadget.ep_list);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b21cd37..23a4473 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -469,7 +469,7 @@
 	   gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -485,10 +485,11 @@
 	  This driver dose not support interrupt transfer or isochronous
 	  transfer modes.
 
-	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+	  This driver also can be used for LAPIS Semiconductor's ML7213 which is
 	  for IVI(In-Vehicle Infotainment) use.
-	  ML7213 is companion chip for Intel Atom E6xx series.
-	  ML7213 is completely compatible for Intel EG20T PCH.
+	  ML7831 is for general purpose use.
+	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
 config USB_CI13XXX_MSM
 	tristate "MIPS USB CI13xxx for MSM"
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 4eedfe5..1fc6129 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -122,3 +122,5 @@
 	return platform_driver_register(&ci13xxx_msm_driver);
 }
 module_init(ci13xxx_msm_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 83428f5..9a0c397 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -71,6 +71,9 @@
 /******************************************************************************
  * DEFINE
  *****************************************************************************/
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
 /* ctrl register bank access */
 static DEFINE_SPINLOCK(udc_lock);
 
@@ -1434,7 +1437,7 @@
 		return -EALREADY;
 
 	mReq->req.status = -EALREADY;
-	if (length && !mReq->req.dma) {
+	if (length && mReq->req.dma == DMA_ADDR_INVALID) {
 		mReq->req.dma = \
 			dma_map_single(mEp->device, mReq->req.buf,
 				       length, mEp->dir ? DMA_TO_DEVICE :
@@ -1453,7 +1456,7 @@
 				dma_unmap_single(mEp->device, mReq->req.dma,
 					length, mEp->dir ? DMA_TO_DEVICE :
 					DMA_FROM_DEVICE);
-				mReq->req.dma = 0;
+				mReq->req.dma = DMA_ADDR_INVALID;
 				mReq->map     = 0;
 			}
 			return -ENOMEM;
@@ -1549,7 +1552,7 @@
 	if (mReq->map) {
 		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
 				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = 0;
+		mReq->req.dma = DMA_ADDR_INVALID;
 		mReq->map     = 0;
 	}
 
@@ -1610,7 +1613,6 @@
  * @gadget: gadget
  *
  * This function returns an error code
- * Caller must hold lock
  */
 static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
@@ -2189,6 +2191,7 @@
 	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
 	if (mReq != NULL) {
 		INIT_LIST_HEAD(&mReq->queue);
+		mReq->req.dma = DMA_ADDR_INVALID;
 
 		mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
 					   &mReq->dma);
@@ -2328,7 +2331,7 @@
 	if (mReq->map) {
 		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
 				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = 0;
+		mReq->req.dma = DMA_ADDR_INVALID;
 		mReq->map     = 0;
 	}
 	req->status = -ECONNRESET;
@@ -2500,12 +2503,12 @@
 	spin_lock_irqsave(udc->lock, flags);
 	if (!udc->remote_wakeup) {
 		ret = -EOPNOTSUPP;
-		dbg_trace("remote wakeup feature is not enabled\n");
+		trace("remote wakeup feature is not enabled\n");
 		goto out;
 	}
 	if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) {
 		ret = -EINVAL;
-		dbg_trace("port is not suspended\n");
+		trace("port is not suspended\n");
 		goto out;
 	}
 	hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR);
@@ -2703,7 +2706,9 @@
 		if (udc->udc_driver->notify_event)
 			udc->udc_driver->notify_event(udc,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
+		spin_unlock_irqrestore(udc->lock, flags);
 		_gadget_stop_activity(&udc->gadget);
+		spin_lock_irqsave(udc->lock, flags);
 		pm_runtime_put(&udc->gadget.dev);
 	}
 
@@ -2850,7 +2855,7 @@
 	struct ci13xxx *udc;
 	int retval = 0;
 
-	trace("%p, %p, %p", dev, regs, name);
+	trace("%p, %p, %p", dev, regs, driver->name);
 
 	if (dev == NULL || regs == NULL || driver == NULL ||
 			driver->name == NULL)
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 52583a2..c39d588 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -624,7 +624,8 @@
 		if (ctrl->bRequestType !=
 		    (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 			break;
-		if (w_index != fsg->interface_number || w_value != 0)
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 0)
 			return -EDOM;
 
 		/*
@@ -639,7 +640,8 @@
 		if (ctrl->bRequestType !=
 		    (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 			break;
-		if (w_index != fsg->interface_number || w_value != 0)
+		if (w_index != fsg->interface_number || w_value != 0 ||
+				w_length != 1)
 			return -EDOM;
 		VDBG(fsg, "get max LUN\n");
 		*(u8 *)req->buf = fsg->common->nluns - 1;
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 67b2229..3797b3d 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -95,7 +95,6 @@
 
 DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
 DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
-DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16);
 DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
 
 /* B.3.1  Standard AC Interface Descriptor */
@@ -140,26 +139,6 @@
 	/* .wTotalLength =	DYNAMIC */
 };
 
-/* B.4.3  Embedded MIDI IN Jack Descriptor */
-static struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
-	.bLength =	      USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =      USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =   USB_MS_MIDI_IN_JACK,
-	.bJackType =	    USB_MS_EMBEDDED,
-	/* .bJackID =		DYNAMIC */
-};
-
-/* B.4.4  Embedded MIDI OUT Jack Descriptor */
-static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = {
-	/* .bLength =		DYNAMIC */
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	/* .bJackID =		DYNAMIC */
-	/* .bNrInputPins =	DYNAMIC */
-	/* .pins =		DYNAMIC */
-};
-
 /* B.5.1  Standard Bulk OUT Endpoint Descriptor */
 static struct usb_endpoint_descriptor bulk_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
@@ -758,9 +737,11 @@
 static int __init
 f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 {
-	struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12];
+	struct usb_descriptor_header **midi_function;
 	struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
+	struct usb_midi_in_jack_descriptor jack_in_emb_desc[MAX_PORTS];
 	struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc[MAX_PORTS];
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_midi *midi = func_to_midi(f);
 	int status, n, jack = 1, i = 0;
@@ -798,6 +779,14 @@
 		goto fail;
 	midi->out_ep->driver_data = cdev;	/* claim */
 
+	/* allocate temporary function list */
+	midi_function = kcalloc((MAX_PORTS * 4) + 9, sizeof(midi_function),
+				GFP_KERNEL);
+	if (!midi_function) {
+		status = -ENOMEM;
+		goto fail;
+	}
+
 	/*
 	 * construct the function's descriptor set. As the number of
 	 * input and output MIDI ports is configurable, we have to do
@@ -811,73 +800,74 @@
 
 	/* calculate the header's wTotalLength */
 	n = USB_DT_MS_HEADER_SIZE
-		+ (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE
-		+ (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1);
+		+ (midi->in_ports + midi->out_ports) *
+			(USB_DT_MIDI_IN_SIZE + USB_DT_MIDI_OUT_SIZE(1));
 	ms_header_desc.wTotalLength = cpu_to_le16(n);
 
 	midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
 
-	/* we have one embedded IN jack */
-	jack_in_emb_desc.bJackID = jack++;
-	midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc;
-
-	/* and a dynamic amount of external IN jacks */
+	/* configure the external IN jacks, each linked to an embedded OUT jack */
 	for (n = 0; n < midi->in_ports; n++) {
-		struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n];
+		struct usb_midi_in_jack_descriptor *in_ext = &jack_in_ext_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_emb = &jack_out_emb_desc[n];
 
-		ext->bLength =			USB_DT_MIDI_IN_SIZE;
-		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
-		ext->bDescriptorSubtype =	USB_MS_MIDI_IN_JACK;
-		ext->bJackType =		USB_MS_EXTERNAL;
-		ext->bJackID =			jack++;
-		ext->iJack =			0;
+		in_ext->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_ext->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_ext->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_ext->bJackType		= USB_MS_EXTERNAL;
+		in_ext->bJackID			= jack++;
+		in_ext->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_ext;
 
-		midi_function[i++] = (struct usb_descriptor_header *) ext;
+		out_emb->bLength		= USB_DT_MIDI_OUT_SIZE(1);
+		out_emb->bDescriptorType	= USB_DT_CS_INTERFACE;
+		out_emb->bDescriptorSubtype	= USB_MS_MIDI_OUT_JACK;
+		out_emb->bJackType		= USB_MS_EMBEDDED;
+		out_emb->bJackID		= jack++;
+		out_emb->bNrInputPins		= 1;
+		out_emb->pins[0].baSourcePin	= 1;
+		out_emb->pins[0].baSourceID	= in_ext->bJackID;
+		out_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) out_emb;
+
+		/* link it to the endpoint */
+		ms_in_desc.baAssocJackID[n] = out_emb->bJackID;
 	}
 
-	/* one embedded OUT jack ... */
-	jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports);
-	jack_out_emb_desc.bJackID = jack++;
-	jack_out_emb_desc.bNrInputPins = midi->in_ports;
-	/* ... which referencess all external IN jacks */
-	for (n = 0; n < midi->in_ports; n++) {
-		jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID;
-		jack_out_emb_desc.pins[n].baSourcePin =	1;
-	}
-
-	midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc;
-
-	/* and multiple external OUT jacks ... */
+	/* configure the external OUT jacks, each linked to an embedded IN jack */
 	for (n = 0; n < midi->out_ports; n++) {
-		struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n];
-		int m;
+		struct usb_midi_in_jack_descriptor *in_emb = &jack_in_emb_desc[n];
+		struct usb_midi_out_jack_descriptor_1 *out_ext = &jack_out_ext_desc[n];
 
-		ext->bLength =			USB_DT_MIDI_OUT_SIZE(1);
-		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
-		ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
-		ext->bJackType =		USB_MS_EXTERNAL;
-		ext->bJackID =			jack++;
-		ext->bNrInputPins =		1;
-		ext->iJack =			0;
-		/* ... which all reference the same embedded IN jack */
-		for (m = 0; m < midi->out_ports; m++) {
-			ext->pins[m].baSourceID =	jack_in_emb_desc.bJackID;
-			ext->pins[m].baSourcePin =	1;
-		}
+		in_emb->bLength			= USB_DT_MIDI_IN_SIZE;
+		in_emb->bDescriptorType		= USB_DT_CS_INTERFACE;
+		in_emb->bDescriptorSubtype	= USB_MS_MIDI_IN_JACK;
+		in_emb->bJackType		= USB_MS_EMBEDDED;
+		in_emb->bJackID			= jack++;
+		in_emb->iJack			= 0;
+		midi_function[i++] = (struct usb_descriptor_header *) in_emb;
 
-		midi_function[i++] = (struct usb_descriptor_header *) ext;
+		out_ext->bLength =		USB_DT_MIDI_OUT_SIZE(1);
+		out_ext->bDescriptorType =	USB_DT_CS_INTERFACE;
+		out_ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
+		out_ext->bJackType =		USB_MS_EXTERNAL;
+		out_ext->bJackID =		jack++;
+		out_ext->bNrInputPins =		1;
+		out_ext->iJack =		0;
+		out_ext->pins[0].baSourceID =	in_emb->bJackID;
+		out_ext->pins[0].baSourcePin =	1;
+		midi_function[i++] = (struct usb_descriptor_header *) out_ext;
+
+		/* link it to the endpoint */
+		ms_out_desc.baAssocJackID[n] = in_emb->bJackID;
 	}
 
 	/* configure the endpoint descriptors ... */
 	ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
 	ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
-	for (n = 0; n < midi->in_ports; n++)
-		ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID;
 
 	ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
 	ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
-	for (n = 0; n < midi->out_ports; n++)
-		ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID;
 
 	/* ... and add them to the list */
 	midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
@@ -901,6 +891,8 @@
 		f->descriptors = usb_copy_descriptors(midi_function);
 	}
 
+	kfree(midi_function);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 3490770..16a509a 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -346,7 +346,7 @@
 		}
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
-				skb->len == 0, req->actual);
+				skb->len <= 1, req->actual);
 		page = NULL;
 
 		if (req->actual < req->length) { /* Last fragment */
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index f7e39b0..11b5196 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -859,7 +859,7 @@
 			if (ctrl->bRequestType != (USB_DIR_OUT |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0 || w_value != 0) {
+			if (w_index != 0 || w_value != 0 || w_length != 0) {
 				value = -EDOM;
 				break;
 			}
@@ -875,7 +875,7 @@
 			if (ctrl->bRequestType != (USB_DIR_IN |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0 || w_value != 0) {
+			if (w_index != 0 || w_value != 0 || w_length != 1) {
 				value = -EDOM;
 				break;
 			}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b2c44e1..b3b3d83 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1717,7 +1717,7 @@
 
 static inline enum usb_device_speed portscx_device_speed(u32 reg)
 {
-	switch (speed & PORTSCX_PORT_SPEED_MASK) {
+	switch (reg & PORTSCX_PORT_SPEED_MASK) {
 	case PORTSCX_PORT_SPEED_HIGH:
 		return USB_SPEED_HIGH;
 	case PORTSCX_PORT_SPEED_FULL:
@@ -2480,8 +2480,7 @@
 
 #ifndef CONFIG_ARCH_MXC
 	if (pdata->have_sysif_regs)
-		usb_sys_regs = (struct usb_sys_interface *)
-				((u32)dr_regs + USB_DR_SYS_OFFSET);
+		usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET;
 #endif
 
 	/* Initialize USB clocks */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a392ec0..6ccae27 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1730,8 +1730,9 @@
 gadgetfs_disconnect (struct usb_gadget *gadget)
 {
 	struct dev_data		*dev = get_gadget_data (gadget);
+	unsigned long		flags;
 
-	spin_lock (&dev->lock);
+	spin_lock_irqsave (&dev->lock, flags);
 	if (dev->state == STATE_DEV_UNCONNECTED)
 		goto exit;
 	dev->state = STATE_DEV_UNCONNECTED;
@@ -1740,7 +1741,7 @@
 	next_event (dev, GADGETFS_DISCONNECT);
 	ep0_readable (dev);
 exit:
-	spin_unlock (&dev->lock);
+	spin_unlock_irqrestore (&dev->lock, flags);
 }
 
 static void
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 550d6dc..5048a0c 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -354,6 +354,7 @@
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
 
 static const char	ep0_string[] = "ep0in";
 static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
@@ -2970,6 +2971,11 @@
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
 	{ 0 },
 };
 
@@ -2999,5 +3005,5 @@
 module_exit(pch_udc_pci_exit);
 
 MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
-MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
+MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 68a826a..24f84b2 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1718,6 +1718,8 @@
 	if (list_empty(&ep->queue) && !ep->busy) {
 		pipe_stop(ep->r8a66597, ep->pipenum);
 		r8a66597_bclr(ep->r8a66597, BCLR, ep->fifoctr);
+		r8a66597_write(ep->r8a66597, ACLRM, ep->pipectr);
+		r8a66597_write(ep->r8a66597, 0, ep->pipectr);
 	}
 	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
 }
@@ -1742,7 +1744,6 @@
 		struct usb_gadget_driver *driver)
 {
 	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
-	int retval;
 
 	if (!driver
 			|| driver->speed != USB_SPEED_HIGH
@@ -1752,16 +1753,7 @@
 		return -ENODEV;
 
 	/* hook up the driver */
-	driver->driver.bus = NULL;
 	r8a66597->driver = driver;
-	r8a66597->gadget.dev.driver = &driver->driver;
-
-	retval = device_add(&r8a66597->gadget.dev);
-	if (retval) {
-		dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n",
-			retval);
-		goto error;
-	}
 
 	init_controller(r8a66597);
 	r8a66597_bset(r8a66597, VBSE, INTENB0);
@@ -1775,12 +1767,6 @@
 	}
 
 	return 0;
-
-error:
-	r8a66597->driver = NULL;
-	r8a66597->gadget.dev.driver = NULL;
-
-	return retval;
 }
 
 static int r8a66597_stop(struct usb_gadget *gadget,
@@ -1794,7 +1780,6 @@
 	disable_controller(r8a66597);
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
 
-	device_del(&r8a66597->gadget.dev);
 	r8a66597->driver = NULL;
 	return 0;
 }
@@ -1845,6 +1830,7 @@
 		clk_put(r8a66597->clk);
 	}
 #endif
+	device_unregister(&r8a66597->gadget.dev);
 	kfree(r8a66597);
 	return 0;
 }
@@ -1924,13 +1910,17 @@
 	r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW;
 
 	r8a66597->gadget.ops = &r8a66597_gadget_ops;
-	device_initialize(&r8a66597->gadget.dev);
 	dev_set_name(&r8a66597->gadget.dev, "gadget");
 	r8a66597->gadget.is_dualspeed = 1;
 	r8a66597->gadget.dev.parent = &pdev->dev;
 	r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask;
 	r8a66597->gadget.dev.release = pdev->dev.release;
 	r8a66597->gadget.name = udc_name;
+	ret = device_register(&r8a66597->gadget.dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "device_register failed\n");
+		goto clean_up;
+	}
 
 	init_timer(&r8a66597->timer);
 	r8a66597->timer.function = r8a66597_timer;
@@ -1945,7 +1935,7 @@
 			dev_err(&pdev->dev, "cannot get clock \"%s\"\n",
 				clk_name);
 			ret = PTR_ERR(r8a66597->clk);
-			goto clean_up;
+			goto clean_up_dev;
 		}
 		clk_enable(r8a66597->clk);
 	}
@@ -2014,7 +2004,9 @@
 		clk_disable(r8a66597->clk);
 		clk_put(r8a66597->clk);
 	}
+clean_up_dev:
 #endif
+	device_unregister(&r8a66597->gadget.dev);
 clean_up:
 	if (r8a66597) {
 		if (r8a66597->sudmac_reg)
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 022baec..6939e17 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -210,10 +210,10 @@
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
 	if (udc_is_newstyle(udc)) {
-		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
 		usb_gadget_udc_stop(udc->gadget, udc->driver);
-
+		usb_gadget_disconnect(udc->gadget);
 	} else {
 		usb_gadget_stop(udc->gadget, udc->driver);
 	}
@@ -344,7 +344,7 @@
 static ssize_t usb_udc_srp_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
-	struct usb_udc		*udc = dev_get_drvdata(dev);
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
 	if (sysfs_streq(buf, "1"))
 		usb_gadget_wakeup(udc->gadget);
@@ -378,7 +378,7 @@
 	return snprintf(buf, PAGE_SIZE, "%s\n",
 			usb_speed_string(udc->gadget->speed));
 }
-static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
+static DEVICE_ATTR(speed, S_IRUGO, usb_udc_speed_show, NULL);
 
 #define USB_UDC_ATTR(name)					\
 ssize_t usb_udc_##name##_show(struct device *dev,		\
@@ -389,7 +389,7 @@
 								\
 	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
 }								\
-static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL)
+static DEVICE_ATTR(name, S_IRUGO, usb_udc_##name##_show, NULL)
 
 static USB_UDC_ATTR(is_dualspeed);
 static USB_UDC_ATTR(is_otg);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 2e829fa..56a3203 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1479,10 +1479,15 @@
 
 		/* NOTE:  assumes URB_ISO_ASAP, to limit complexity/bugs */
 
-		/* find a uframe slot with enough bandwidth */
-		next = start + period;
-		for (; start < next; start++) {
-
+		/* find a uframe slot with enough bandwidth.
+		 * Early uframes are more precious because full-speed
+		 * iso IN transfers can't use late uframes,
+		 * and therefore they should be allocated last.
+		 */
+		next = start;
+		start += period;
+		do {
+			start--;
 			/* check schedule: enough space? */
 			if (stream->highspeed) {
 				if (itd_slot_ok(ehci, mod, start,
@@ -1495,7 +1500,7 @@
 						start, sched, period))
 					break;
 			}
-		}
+		} while (start > next);
 
 		/* no room in the schedule */
 		if (start == next) {
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
index fe74bd6..b4fb511 100644
--- a/drivers/usb/host/ehci-xls.c
+++ b/drivers/usb/host/ehci-xls.c
@@ -19,7 +19,7 @@
 
 	ehci->caps = hcd->regs;
 	ehci->regs = hcd->regs +
-		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index ba3a46b..95a9fec 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,6 +223,9 @@
 	if (port < 0 || port >= 2)
 		return;
 
+	if (pdata->vbus_pin[port] <= 0)
+		return;
+
 	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
 }
 
@@ -231,6 +234,9 @@
 	if (port < 0 || port >= 2)
 		return -EINVAL;
 
+	if (pdata->vbus_pin[port] <= 0)
+		return -EINVAL;
+
 	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
 }
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 34efd47..b263919 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -389,17 +389,14 @@
 	struct ohci_hcd *ohci;
 
 	ohci = hcd_to_ohci (hcd);
-	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+	ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
 
-	/* If the SHUTDOWN quirk is set, don't put the controller in RESET */
-	ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ?
-			OHCI_CTRL_RWC | OHCI_CTRL_HCFS :
-			OHCI_CTRL_RWC);
-	ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+	/* Software reset, after which the controller goes into SUSPEND */
+	ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus);
+	ohci_readl(ohci, &ohci->regs->cmdstatus);	/* flush the writes */
+	udelay(10);
 
-	/* flush the writes */
-	(void) ohci_readl (ohci, &ohci->regs->control);
+	ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval);
 }
 
 static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ad8166c..bc01b06 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -175,28 +175,6 @@
 	return 0;
 }
 
-/* nVidia controllers continue to drive Reset signalling on the bus
- * even after system shutdown, wasting power.  This flag tells the
- * shutdown routine to leave the controller OPERATIONAL instead of RESET.
- */
-static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
-{
-	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-
-	/* Evidently nVidia fixed their later hardware; this is a guess at
-	 * the changeover point.
-	 */
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB		0x026d
-
-	if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
-		ohci->flags |= OHCI_QUIRK_SHUTDOWN;
-		ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
-	}
-
-	return 0;
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;
@@ -260,10 +238,6 @@
 		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 		.driver_data = (unsigned long)ohci_quirk_amd700,
 	},
-	{
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
-		.driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
-	},
 
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 35e5fd6..0795b93 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -403,7 +403,6 @@
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
 #define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
-#define	OHCI_QUIRK_SHUTDOWN	0x800			/* nVidia power bug */
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 27a3dec..caf8742 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -37,6 +37,7 @@
 #define OHCI_INTRENABLE		0x10
 #define OHCI_INTRDISABLE	0x14
 #define OHCI_FMINTERVAL		0x34
+#define OHCI_HCFS		(3 << 6)	/* hc functional state */
 #define OHCI_HCR		(1 << 0)	/* host controller reset */
 #define OHCI_OCR		(1 << 3)	/* ownership change request */
 #define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
@@ -466,6 +467,8 @@
 {
 	void __iomem *base;
 	u32 control;
+	u32 fminterval;
+	int cnt;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -498,41 +501,32 @@
 	}
 #endif
 
-	/* reset controller, preserving RWC (and possibly IR) */
-	writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
-	readl(base + OHCI_CONTROL);
+	/* disable interrupts */
+	writel((u32) ~0, base + OHCI_INTRDISABLE);
 
-	/* Some NVIDIA controllers stop working if kept in RESET for too long */
-	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
-		u32 fminterval;
-		int cnt;
+	/* Reset the USB bus, if the controller isn't already in RESET */
+	if (control & OHCI_HCFS) {
+		/* Go into RESET, preserving RWC (and possibly IR) */
+		writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+		readl(base + OHCI_CONTROL);
 
-		/* drive reset for at least 50 ms (7.1.7.5) */
+		/* drive bus reset for at least 50 ms (7.1.7.5) */
 		msleep(50);
-
-		/* software reset of the controller, preserving HcFmInterval */
-		fminterval = readl(base + OHCI_FMINTERVAL);
-		writel(OHCI_HCR, base + OHCI_CMDSTATUS);
-
-		/* reset requires max 10 us delay */
-		for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
-			if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
-				break;
-			udelay(1);
-		}
-		writel(fminterval, base + OHCI_FMINTERVAL);
-
-		/* Now we're in the SUSPEND state with all devices reset
-		 * and wakeups and interrupts disabled
-		 */
 	}
 
-	/*
-	 * disable interrupts
-	 */
-	writel(~(u32)0, base + OHCI_INTRDISABLE);
-	writel(~(u32)0, base + OHCI_INTRSTATUS);
+	/* software reset of the controller, preserving HcFmInterval */
+	fminterval = readl(base + OHCI_FMINTERVAL);
+	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
 
+	/* reset requires max 10 us delay */
+	for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
+		if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+			break;
+		udelay(1);
+	}
+	writel(fminterval, base + OHCI_FMINTERVAL);
+
+	/* Now the controller is safely in SUSPEND and nothing can wake it up */
 	iounmap(base);
 }
 
@@ -627,7 +621,7 @@
 	void __iomem *base, *op_reg_base;
 	u32	hcc_params, cap, val;
 	u8	offset, cap_length;
-	int	wait_time, delta, count = 256/4;
+	int	wait_time, count = 256/4;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -673,11 +667,10 @@
 		writel(val, op_reg_base + EHCI_USBCMD);
 
 		wait_time = 2000;
-		delta = 100;
 		do {
 			writel(0x3f, op_reg_base + EHCI_USBSTS);
-			udelay(delta);
-			wait_time -= delta;
+			udelay(100);
+			wait_time -= 100;
 			val = readl(op_reg_base + EHCI_USBSTS);
 			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
 				break;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 42a22b8..0e4b25f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -982,7 +982,6 @@
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	struct xhci_input_control_ctx *ctrl_ctx;
 	u32			port_num;
 	struct usb_device *top_dev;
 
@@ -994,12 +993,8 @@
 		return -EINVAL;
 	}
 	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
-	/* 2) New slot context and endpoint 0 context are valid*/
-	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
-
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
 	switch (udev->speed) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 940321b..9f1d4b1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -816,23 +816,24 @@
 	struct xhci_ring *ring;
 	struct xhci_td *cur_td;
 	int ret, i, j;
+	unsigned long flags;
 
 	ep = (struct xhci_virt_ep *) arg;
 	xhci = ep->xhci;
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 
 	ep->stop_cmds_pending--;
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
 		xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
 				"xHCI as DYING, exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 	if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
 		xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
 				"exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 
@@ -844,11 +845,11 @@
 	xhci->xhc_state |= XHCI_STATE_DYING;
 	/* Disable interrupts from the host controller and start halting it */
 	xhci_quiesce(xhci);
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	ret = xhci_halt(xhci);
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ret < 0) {
 		/* This is bad; the host is not responding to commands and it's
 		 * not allowing itself to be halted.  At least interrupts are
@@ -896,7 +897,7 @@
 			}
 		}
 	}
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	xhci_dbg(xhci, "Calling usb_hc_died()\n");
 	usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 	xhci_dbg(xhci, "xHCI host controller is dead.\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1ff95a0..aa94c01 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -799,7 +799,7 @@
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
-	int			retval;
+	int			retval = 0;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -809,6 +809,9 @@
 				xhci->bus_state[1].next_statechange))
 		msleep(100);
 
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
 	spin_lock_irq(&xhci->lock);
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		hibernated = true;
@@ -878,20 +881,13 @@
 			return retval;
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
-		if (retval)
-			goto failed_restart;
-
-		xhci_dbg(xhci, "Start the secondary HCD\n");
-		retval = xhci_run(secondary_hcd);
 		if (!retval) {
-			set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-			set_bit(HCD_FLAG_HW_ACCESSIBLE,
-					&xhci->shared_hcd->flags);
+			xhci_dbg(xhci, "Start the secondary HCD\n");
+			retval = xhci_run(secondary_hcd);
 		}
-failed_restart:
 		hcd->state = HC_STATE_SUSPENDED;
 		xhci->shared_hcd->state = HC_STATE_SUSPENDED;
-		return retval;
+		goto done;
 	}
 
 	/* step 4: set Run/Stop bit */
@@ -910,11 +906,14 @@
 	 * Running endpoints by ringing their doorbells
 	 */
 
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
-
 	spin_unlock_irq(&xhci->lock);
-	return 0;
+
+ done:
+	if (retval == 0) {
+		usb_hcd_resume_root_hub(hcd);
+		usb_hcd_resume_root_hub(xhci->shared_hcd);
+	}
+	return retval;
 }
 #endif	/* CONFIG_PM */
 
@@ -3504,6 +3503,10 @@
 	/* Otherwise, update the control endpoint ring enqueue pointer. */
 	else
 		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
@@ -3585,7 +3588,6 @@
 	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
 		+ 1;
 	/* Zero the input context control for later use */
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx->add_flags = 0;
 	ctrl_ctx->drop_flags = 0;
 
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index fc34b8b..07a0346 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
+	select USB_GADGET_DUALSPEED
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -60,7 +61,7 @@
 
 config USB_MUSB_UX500
 	tristate "U8500 and U5500"
-	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+	depends on (ARCH_U8500 && AB8500_USB)
 
 endchoice
 
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 08f1d0b6..e233d2b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 4da7492..2613bfd 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 20a2873..c1fa12e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1477,8 +1477,7 @@
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
-	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
-	defined(CONFIG_ARCH_U5500)
+	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ae4a20a..d51043a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1999,10 +1999,6 @@
 					nuke(&hw_ep->ep_out, -ESHUTDOWN);
 			}
 		}
-
-		spin_unlock(&musb->lock);
-		driver->disconnect(&musb->g);
-		spin_lock(&musb->lock);
 	}
 }
 
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index d2e2efa..08c679c 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -405,7 +405,7 @@
 /*
  *		platform functions
  */
-static int __devinit usbhs_probe(struct platform_device *pdev)
+static int usbhs_probe(struct platform_device *pdev)
 {
 	struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
 	struct renesas_usbhs_driver_callback *dfunc;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 8da685e..ffdf5d1 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -820,7 +820,7 @@
 	if (len % 4) /* 32bit alignment */
 		goto usbhsf_pio_prepare_push;
 
-	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_push;
 
 	/* get enable DMA fifo */
@@ -897,7 +897,7 @@
 	if (!fifo)
 		goto usbhsf_pio_prepare_pop;
 
-	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_pop;
 
 	ret = usbhsf_fifo_select(pipe, fifo, 0);
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index 8ae3733..6c68755 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -143,8 +143,8 @@
  */
 #if	defined(CONFIG_USB_RENESAS_USBHS_HCD) || \
 	defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE)
-extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv);
-extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv);
+extern int usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int usbhs_mod_host_remove(struct usbhs_priv *priv);
 #else
 static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
 {
@@ -157,8 +157,8 @@
 
 #if	defined(CONFIG_USB_RENESAS_USBHS_UDC) || \
 	defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE)
-extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv);
-extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv);
+extern int usbhs_mod_gadget_probe(struct usbhs_priv *priv);
+extern void usbhs_mod_gadget_remove(struct usbhs_priv *priv);
 #else
 static inline int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 4cc7ee0..d9717e0 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -830,7 +830,7 @@
 	return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED);
 }
 
-int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
+int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv;
 	struct usbhsg_uep *uep;
@@ -927,7 +927,7 @@
 	return ret;
 }
 
-void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv)
+void usbhs_mod_gadget_remove(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 1a7208a..bade761 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -103,7 +103,7 @@
 
 	u32	port_stat;	/* USB_PORT_STAT_xxx */
 
-	struct completion	*done;
+	struct completion	setup_ack_done;
 
 	/* see usbhsh_req_alloc/free */
 	struct list_head	ureq_link_active;
@@ -355,6 +355,7 @@
 struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
 					struct usbhsh_device *udev,
 					struct usb_host_endpoint *ep,
+					int dir_in_req,
 					gfp_t mem_flags)
 {
 	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
@@ -364,27 +365,38 @@
 	struct usbhs_pipe *pipe, *best_pipe;
 	struct device *dev = usbhsh_hcd_to_dev(hcd);
 	struct usb_endpoint_descriptor *desc = &ep->desc;
-	int type, i;
+	int type, i, dir_in;
 	unsigned int min_usr;
 
+	dir_in_req = !!dir_in_req;
+
 	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
 	if (!uep) {
 		dev_err(dev, "usbhsh_ep alloc fail\n");
 		return NULL;
 	}
-	type = usb_endpoint_type(desc);
+
+	if (usb_endpoint_xfer_control(desc)) {
+		best_pipe = usbhsh_hpriv_to_dcp(hpriv);
+		goto usbhsh_endpoint_alloc_find_pipe;
+	}
 
 	/*
 	 * find best pipe for endpoint
 	 * see
 	 *	HARDWARE LIMITATION
 	 */
+	type = usb_endpoint_type(desc);
 	min_usr = ~0;
 	best_pipe = NULL;
-	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+	usbhs_for_each_pipe(pipe, priv, i) {
 		if (!usbhs_pipe_type_is(pipe, type))
 			continue;
 
+		dir_in = !!usbhs_pipe_is_dir_in(pipe);
+		if (0 != (dir_in - dir_in_req))
+			continue;
+
 		info = usbhsh_pipe_info(pipe);
 
 		if (min_usr > info->usr_cnt) {
@@ -398,7 +410,7 @@
 		kfree(uep);
 		return NULL;
 	}
-
+usbhsh_endpoint_alloc_find_pipe:
 	/*
 	 * init uep
 	 */
@@ -423,6 +435,7 @@
 	 * see
 	 *  DCPMAXP/PIPEMAXP
 	 */
+	usbhs_pipe_sequence_data0(uep->pipe);
 	usbhs_pipe_config_update(uep->pipe,
 				 usbhsh_device_number(hpriv, udev),
 				 usb_endpoint_num(desc),
@@ -430,7 +443,7 @@
 
 	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
 		usbhsh_device_number(hpriv, udev),
-		usbhs_pipe_name(pipe), uep);
+		usbhs_pipe_name(uep->pipe), uep);
 
 	return uep;
 }
@@ -549,8 +562,7 @@
 	 *	usbhsh_irq_setup_ack()
 	 *	usbhsh_irq_setup_err()
 	 */
-	DECLARE_COMPLETION(done);
-	hpriv->done = &done;
+	init_completion(&hpriv->setup_ack_done);
 
 	/* copy original request */
 	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
@@ -572,8 +584,7 @@
 	/*
 	 * wait setup packet ACK
 	 */
-	wait_for_completion(&done);
-	hpriv->done = NULL;
+	wait_for_completion(&hpriv->setup_ack_done);
 
 	dev_dbg(dev, "%s done\n", __func__);
 }
@@ -724,11 +735,11 @@
 	struct usbhsh_device *udev, *new_udev = NULL;
 	struct usbhs_pipe *pipe;
 	struct usbhsh_ep *uep;
+	int is_dir_in = usb_pipein(urb->pipe);
 
 	int ret;
 
-	dev_dbg(dev, "%s (%s)\n",
-		__func__, usb_pipein(urb->pipe) ? "in" : "out");
+	dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
 
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
 	if (ret)
@@ -751,7 +762,8 @@
 	 */
 	uep = usbhsh_ep_to_uep(ep);
 	if (!uep) {
-		uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags);
+		uep = usbhsh_endpoint_alloc(hpriv, udev, ep,
+					    is_dir_in, mem_flags);
 		if (!uep)
 			goto usbhsh_urb_enqueue_error_free_device;
 	}
@@ -1095,10 +1107,7 @@
 
 	dev_dbg(dev, "setup packet OK\n");
 
-	if (unlikely(!hpriv->done))
-		dev_err(dev, "setup ack happen without necessary data\n");
-	else
-		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
 
 	return 0;
 }
@@ -1111,10 +1120,7 @@
 
 	dev_dbg(dev, "setup packet Err\n");
 
-	if (unlikely(!hpriv->done))
-		dev_err(dev, "setup err happen without necessary data\n");
-	else
-		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+	complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
 
 	return 0;
 }
@@ -1221,8 +1227,18 @@
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct device *dev = usbhs_priv_to_dev(priv);
 
+	/*
+	 * disable irq callback
+	 */
+	mod->irq_attch	= NULL;
+	mod->irq_dtch	= NULL;
+	mod->irq_sack	= NULL;
+	mod->irq_sign	= NULL;
+	usbhs_irq_callback_update(priv, mod);
+
 	usb_remove_hcd(hcd);
 
 	/* disable sys */
@@ -1235,7 +1251,7 @@
 	return 0;
 }
 
-int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv)
+int usbhs_mod_host_probe(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv;
 	struct usb_hcd *hcd;
@@ -1279,7 +1295,6 @@
 	hpriv->mod.stop		= usbhsh_stop;
 	hpriv->pipe_info	= pipe_info;
 	hpriv->pipe_size	= pipe_size;
-	hpriv->done		= NULL;
 	usbhsh_req_list_init(hpriv);
 	usbhsh_port_stat_init(hpriv);
 
@@ -1299,7 +1314,7 @@
 	return -ENOMEM;
 }
 
-int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv)
+int usbhs_mod_host_remove(struct usbhs_priv *priv)
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5cdb9d9..18e875b 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@
  * Version information
  */
 
-#define DRIVER_VERSION "v0.6"
+#define DRIVER_VERSION "v0.7"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -380,10 +380,6 @@
 		goto err_out;
 	}
 
-	/* setup termios */
-	if (tty)
-		ark3116_set_termios(tty, port, NULL);
-
 	/* remove any data still left: also clears error state */
 	ark3116_read_reg(serial, UART_RX, buf);
 
@@ -406,6 +402,10 @@
 	/* enable DMA */
 	ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
 
+	/* setup termios */
+	if (tty)
+		ark3116_set_termios(tty, port, NULL);
+
 err_out:
 	kfree(buf);
 	return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fe034d..bd4298b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2104,13 +2104,19 @@
 
 	cflag = termios->c_cflag;
 
-	/* FIXME -For this cut I don't care if the line is really changing or
-	   not  - so just do the change regardless  - should be able to
-	   compare old_termios and tty->termios */
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
 	/* NOTE These routines can get interrupted by
 	   ftdi_sio_read_bulk_callback  - need to examine what this means -
 	   don't see any problems yet */
 
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
 	/* Set number of data bits, parity, stop bits */
 
 	urb_value = 0;
@@ -2151,6 +2157,7 @@
 	}
 
 	/* Now do the baudrate */
+no_data_parity_stop_changes:
 	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2178,6 +2185,7 @@
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
 	if (cflag & CRTSCTS) {
 		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89ae1f6..d865878 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -156,6 +156,7 @@
 #define HUAWEI_PRODUCT_K4511			0x14CC
 #define HUAWEI_PRODUCT_ETS1220			0x1803
 #define HUAWEI_PRODUCT_E353			0x1506
+#define HUAWEI_PRODUCT_E173S			0x1C05
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -316,6 +317,9 @@
 #define ZTE_PRODUCT_AC8710			0xfff1
 #define ZTE_PRODUCT_AC2726			0xfff5
 #define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -468,6 +472,10 @@
 #define YUGA_PRODUCT_CLU528			0x260D
 #define YUGA_PRODUCT_CLU526			0x260F
 
+/* Viettel products */
+#define VIETTEL_VENDOR_ID			0x2262
+#define VIETTEL_PRODUCT_VT1000			0x0002
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -500,6 +508,18 @@
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info zte_mc2718_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -622,6 +642,7 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -1043,6 +1064,12 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -1141,6 +1168,7 @@
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9083d1e..fc2d66f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f..c38b8c0 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID		0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 4dca3ef..9fbe742 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -1762,10 +1762,9 @@
 		result = ene_send_scsi_cmd(us, FDIR_WRITE, scsi_sglist(srb), 1);
 	} else {
 		void *buf;
-		int offset;
+		int offset = 0;
 		u16 PhyBlockAddr;
 		u8 PageNum;
-		u32 result;
 		u16 len, oldphy, newphy;
 
 		buf = kmalloc(blenByte, GFP_KERNEL);
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 93c1a4d..82dd834 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -59,7 +59,9 @@
 
 void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* Pad the SCSI command with zeros out to 12 bytes
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
 	 * a unsigned char cmnd[16], so we know we have storage available
@@ -67,9 +69,6 @@
 	for (; srb->cmd_len<12; srb->cmd_len++)
 		srb->cmnd[srb->cmd_len] = 0;
 
-	/* set command length to 12 bytes */
-	srb->cmd_len = 12;
-
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 816ed08..1a61939 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -37,7 +37,7 @@
 
  config VIRTIO_MMIO
  	tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)"
- 	depends on EXPERIMENTAL
+ 	depends on HAS_IOMEM && EXPERIMENTAL
  	select VIRTIO
  	select VIRTIO_RING
  	---help---
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index acc5e43..7317dc2e 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -118,7 +118,7 @@
 	vring_transport_features(vdev);
 
 	for (i = 0; i < ARRAY_SIZE(vdev->features); i++) {
-		writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET);
+		writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SEL);
 		writel(vdev->features[i],
 				vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES);
 	}
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 79a31e5..03d1984 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -169,11 +169,29 @@
 	iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
 }
 
+/* wait for pending irq handlers */
+static void vp_synchronize_vectors(struct virtio_device *vdev)
+{
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	int i;
+
+	if (vp_dev->intx_enabled)
+		synchronize_irq(vp_dev->pci_dev->irq);
+
+	for (i = 0; i < vp_dev->msix_vectors; ++i)
+		synchronize_irq(vp_dev->msix_entries[i].vector);
+}
+
 static void vp_reset(struct virtio_device *vdev)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	/* 0 status means a reset. */
 	iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+	/* Flush out the status write, and flush in device writes,
+	 * including MSi-X interrupts, if any. */
+	ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
+	/* Flush pending VQ/configuration callbacks. */
+	vp_synchronize_vectors(vdev);
 }
 
 /* the notify function used when creating a virt queue */
@@ -594,11 +612,11 @@
 
 static void virtio_pci_release_dev(struct device *_d)
 {
-	struct virtio_device *dev = container_of(_d, struct virtio_device,
-						 dev);
-	struct virtio_pci_device *vp_dev = to_vp_device(dev);
-
-	kfree(vp_dev);
+	/*
+	 * No need for a release method as we allocate/free
+	 * all devices together with the pci devices.
+	 * Provide an empty one to avoid getting a warning from core.
+	 */
 }
 
 /* the PCI probing function */
@@ -686,6 +704,7 @@
 	pci_iounmap(pci_dev, vp_dev->ioaddr);
 	pci_release_regions(pci_dev);
 	pci_disable_device(pci_dev);
+	kfree(vp_dev);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 6285867..79fd606 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -314,13 +314,6 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called nuc900_wdt.
 
-config ADX_WATCHDOG
-	tristate "Avionic Design Xanthos watchdog"
-	depends on ARCH_PXA_ADX
-	help
-	  Say Y here if you want support for the watchdog timer on Avionic
-	  Design Xanthos boards.
-
 config TS72XX_WATCHDOG
 	tristate "TS-72XX SBC Watchdog"
 	depends on MACH_TS72XX
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 55bd574..fe893e9 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -51,7 +51,6 @@
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
-obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
 obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
 
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
deleted file mode 100644
index af6e6b1..0000000
--- a/drivers/watchdog/adx_wdt.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Avionic Design GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/fs.h>
-#include <linux/gfp.h>
-#include <linux/io.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-#include <linux/watchdog.h>
-
-#define WATCHDOG_NAME "adx-wdt"
-
-/* register offsets */
-#define	ADX_WDT_CONTROL		0x00
-#define	ADX_WDT_CONTROL_ENABLE	(1 << 0)
-#define	ADX_WDT_CONTROL_nRESET	(1 << 1)
-#define	ADX_WDT_TIMEOUT		0x08
-
-static struct platform_device *adx_wdt_dev;
-static unsigned long driver_open;
-
-#define	WDT_STATE_STOP	0
-#define	WDT_STATE_START	1
-
-struct adx_wdt {
-	void __iomem *base;
-	unsigned long timeout;
-	unsigned int state;
-	unsigned int wake;
-	spinlock_t lock;
-};
-
-static const struct watchdog_info adx_wdt_info = {
-	.identity = "Avionic Design Xanthos Watchdog",
-	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-};
-
-static void adx_wdt_start_locked(struct adx_wdt *wdt)
-{
-	u32 ctrl;
-
-	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
-	ctrl |= ADX_WDT_CONTROL_ENABLE;
-	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
-	wdt->state = WDT_STATE_START;
-}
-
-static void adx_wdt_start(struct adx_wdt *wdt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	adx_wdt_start_locked(wdt);
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static void adx_wdt_stop_locked(struct adx_wdt *wdt)
-{
-	u32 ctrl;
-
-	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
-	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
-	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
-	wdt->state = WDT_STATE_STOP;
-}
-
-static void adx_wdt_stop(struct adx_wdt *wdt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	adx_wdt_stop_locked(wdt);
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds)
-{
-	unsigned long timeout = seconds * 1000;
-	unsigned long flags;
-	unsigned int state;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	state = wdt->state;
-	adx_wdt_stop_locked(wdt);
-	writel(timeout, wdt->base + ADX_WDT_TIMEOUT);
-
-	if (state == WDT_STATE_START)
-		adx_wdt_start_locked(wdt);
-
-	wdt->timeout = timeout;
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds)
-{
-	*seconds = wdt->timeout / 1000;
-}
-
-static void adx_wdt_keepalive(struct adx_wdt *wdt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wdt->lock, flags);
-	writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT);
-	spin_unlock_irqrestore(&wdt->lock, flags);
-}
-
-static int adx_wdt_open(struct inode *inode, struct file *file)
-{
-	struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev);
-
-	if (test_and_set_bit(0, &driver_open))
-		return -EBUSY;
-
-	file->private_data = wdt;
-	adx_wdt_set_timeout(wdt, 30);
-	adx_wdt_start(wdt);
-
-	return nonseekable_open(inode, file);
-}
-
-static int adx_wdt_release(struct inode *inode, struct file *file)
-{
-	struct adx_wdt *wdt = file->private_data;
-
-	adx_wdt_stop(wdt);
-	clear_bit(0, &driver_open);
-
-	return 0;
-}
-
-static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	struct adx_wdt *wdt = file->private_data;
-	void __user *argp = (void __user *)arg;
-	unsigned long __user *p = argp;
-	unsigned long seconds = 0;
-	unsigned int options;
-	long ret = -EINVAL;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info)))
-			return -EFAULT;
-		else
-			return 0;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-
-	case WDIOC_KEEPALIVE:
-		adx_wdt_keepalive(wdt);
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(seconds, p))
-			return -EFAULT;
-
-		adx_wdt_set_timeout(wdt, seconds);
-
-		/* fallthrough */
-	case WDIOC_GETTIMEOUT:
-		adx_wdt_get_timeout(wdt, &seconds);
-		return put_user(seconds, p);
-
-	case WDIOC_SETOPTIONS:
-		if (copy_from_user(&options, argp, sizeof(options)))
-			return -EFAULT;
-
-		if (options & WDIOS_DISABLECARD) {
-			adx_wdt_stop(wdt);
-			ret = 0;
-		}
-
-		if (options & WDIOS_ENABLECARD) {
-			adx_wdt_start(wdt);
-			ret = 0;
-		}
-
-		return ret;
-
-	default:
-		break;
-	}
-
-	return -ENOTTY;
-}
-
-static ssize_t adx_wdt_write(struct file *file, const char __user *data,
-		size_t len, loff_t *ppos)
-{
-	struct adx_wdt *wdt = file->private_data;
-
-	if (len)
-		adx_wdt_keepalive(wdt);
-
-	return len;
-}
-
-static const struct file_operations adx_wdt_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.open = adx_wdt_open,
-	.release = adx_wdt_release,
-	.unlocked_ioctl = adx_wdt_ioctl,
-	.write = adx_wdt_write,
-};
-
-static struct miscdevice adx_wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &adx_wdt_fops,
-};
-
-static int __devinit adx_wdt_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct adx_wdt *wdt;
-	int ret = 0;
-	u32 ctrl;
-
-	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
-	if (!wdt) {
-		dev_err(&pdev->dev, "cannot allocate WDT structure\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&wdt->lock);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot obtain I/O memory region\n");
-		return -ENXIO;
-	}
-
-	res = devm_request_mem_region(&pdev->dev, res->start,
-			resource_size(res), res->name);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot request I/O memory region\n");
-		return -ENXIO;
-	}
-
-	wdt->base = devm_ioremap_nocache(&pdev->dev, res->start,
-			resource_size(res));
-	if (!wdt->base) {
-		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-		return -ENXIO;
-	}
-
-	/* disable watchdog and reboot on timeout */
-	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
-	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
-	ctrl &= ~ADX_WDT_CONTROL_nRESET;
-	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
-
-	platform_set_drvdata(pdev, wdt);
-	adx_wdt_dev = pdev;
-
-	ret = misc_register(&adx_wdt_miscdev);
-	if (ret) {
-		dev_err(&pdev->dev, "cannot register miscdev on minor %d "
-				"(err=%d)\n", WATCHDOG_MINOR, ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __devexit adx_wdt_remove(struct platform_device *pdev)
-{
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-
-	misc_deregister(&adx_wdt_miscdev);
-	adx_wdt_stop(wdt);
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static void adx_wdt_shutdown(struct platform_device *pdev)
-{
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-	adx_wdt_stop(wdt);
-}
-
-#ifdef CONFIG_PM
-static int adx_wdt_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-
-	wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0;
-	adx_wdt_stop(wdt);
-
-	return 0;
-}
-
-static int adx_wdt_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct adx_wdt *wdt = platform_get_drvdata(pdev);
-
-	if (wdt->wake)
-		adx_wdt_start(wdt);
-
-	return 0;
-}
-
-static const struct dev_pm_ops adx_wdt_pm_ops = {
-	.suspend = adx_wdt_suspend,
-	.resume = adx_wdt_resume,
-};
-
-#  define ADX_WDT_PM_OPS	(&adx_wdt_pm_ops)
-#else
-#  define ADX_WDT_PM_OPS	NULL
-#endif
-
-static struct platform_driver adx_wdt_driver = {
-	.probe = adx_wdt_probe,
-	.remove = __devexit_p(adx_wdt_remove),
-	.shutdown = adx_wdt_shutdown,
-	.driver = {
-		.name = WATCHDOG_NAME,
-		.owner = THIS_MODULE,
-		.pm = ADX_WDT_PM_OPS,
-	},
-};
-
-static int __init adx_wdt_init(void)
-{
-	return platform_driver_register(&adx_wdt_driver);
-}
-
-static void __exit adx_wdt_exit(void)
-{
-	platform_driver_unregister(&adx_wdt_driver);
-}
-
-module_init(adx_wdt_init);
-module_exit(adx_wdt_exit);
-
-MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 5de7e4f..a79e384 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -401,8 +401,8 @@
 
 	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
-		 (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
-		 (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
+		 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
+		 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
 
 	return 0;
 
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 7be3855..e789a47 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -150,7 +150,7 @@
 		if (wm831x_wdt_cfgs[i].time == timeout)
 			break;
 	if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
-		ret = -EINVAL;
+		return -EINVAL;
 
 	ret = wm831x_reg_unlock(wm831x);
 	if (ret == 0) {
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index a767884..31ab82f 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -501,7 +501,7 @@
  * alloc_xenballooned_pages - get pages that have been ballooned out
  * @nr_pages: Number of pages to get
  * @pages: pages returned
- * @highmem: highmem or lowmem pages
+ * @highmem: allow highmem pages
  * @return 0 on success, error otherwise
  */
 int alloc_xenballooned_pages(int nr_pages, struct page **pages, bool highmem)
@@ -511,7 +511,7 @@
 	mutex_lock(&balloon_mutex);
 	while (pgno < nr_pages) {
 		page = balloon_retrieve(highmem);
-		if (page && PageHighMem(page) == highmem) {
+		if (page && (highmem || !PageHighMem(page))) {
 			pages[pgno++] = page;
 		} else {
 			enum bp_state st;
diff --git a/drivers/xen/gntalloc.c b/drivers/xen/gntalloc.c
index f6832f4..e1c4c6e 100644
--- a/drivers/xen/gntalloc.c
+++ b/drivers/xen/gntalloc.c
@@ -135,7 +135,7 @@
 		/* Grant foreign access to the page. */
 		gref->gref_id = gnttab_grant_foreign_access(op->domid,
 			pfn_to_mfn(page_to_pfn(gref->page)), readonly);
-		if (gref->gref_id < 0) {
+		if ((int)gref->gref_id < 0) {
 			rc = gref->gref_id;
 			goto undo;
 		}
@@ -280,7 +280,7 @@
 		goto out;
 	}
 
-	gref_ids = kzalloc(sizeof(gref_ids[0]) * op.count, GFP_TEMPORARY);
+	gref_ids = kcalloc(op.count, sizeof(gref_ids[0]), GFP_TEMPORARY);
 	if (!gref_ids) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 3987132..afca14d 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -114,11 +114,11 @@
 	if (NULL == add)
 		return NULL;
 
-	add->grants    = kzalloc(sizeof(add->grants[0])    * count, GFP_KERNEL);
-	add->map_ops   = kzalloc(sizeof(add->map_ops[0])   * count, GFP_KERNEL);
-	add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL);
-	add->kmap_ops  = kzalloc(sizeof(add->kmap_ops[0])  * count, GFP_KERNEL);
-	add->pages     = kzalloc(sizeof(add->pages[0])     * count, GFP_KERNEL);
+	add->grants    = kcalloc(count, sizeof(add->grants[0]), GFP_KERNEL);
+	add->map_ops   = kcalloc(count, sizeof(add->map_ops[0]), GFP_KERNEL);
+	add->unmap_ops = kcalloc(count, sizeof(add->unmap_ops[0]), GFP_KERNEL);
+	add->kmap_ops  = kcalloc(count, sizeof(add->kmap_ops[0]), GFP_KERNEL);
+	add->pages     = kcalloc(count, sizeof(add->pages[0]), GFP_KERNEL);
 	if (NULL == add->grants    ||
 	    NULL == add->map_ops   ||
 	    NULL == add->unmap_ops ||
diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index 81c3ce6..1906125 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -35,6 +35,7 @@
 #include <linux/vmalloc.h>
 #include <linux/export.h>
 #include <asm/xen/hypervisor.h>
+#include <asm/xen/page.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/event_channel.h>
 #include <xen/events.h>
@@ -436,19 +437,20 @@
 int xenbus_map_ring_valloc(struct xenbus_device *dev, int gnt_ref, void **vaddr)
 {
 	struct gnttab_map_grant_ref op = {
-		.flags = GNTMAP_host_map,
+		.flags = GNTMAP_host_map | GNTMAP_contains_pte,
 		.ref   = gnt_ref,
 		.dom   = dev->otherend_id,
 	};
 	struct vm_struct *area;
+	pte_t *pte;
 
 	*vaddr = NULL;
 
-	area = alloc_vm_area(PAGE_SIZE);
+	area = alloc_vm_area(PAGE_SIZE, &pte);
 	if (!area)
 		return -ENOMEM;
 
-	op.host_addr = (unsigned long)area->addr;
+	op.host_addr = arbitrary_virt_to_machine(pte).maddr;
 
 	if (HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, &op, 1))
 		BUG();
@@ -527,6 +529,7 @@
 	struct gnttab_unmap_grant_ref op = {
 		.host_addr = (unsigned long)vaddr,
 	};
+	unsigned int level;
 
 	/* It'd be nice if linux/vmalloc.h provided a find_vm_area(void *addr)
 	 * method so that we don't have to muck with vmalloc internals here.
@@ -548,6 +551,8 @@
 	}
 
 	op.handle = (grant_handle_t)area->phys_addr;
+	op.host_addr = arbitrary_virt_to_machine(
+		lookup_address((unsigned long)vaddr, &level)).maddr;
 
 	if (HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, &op, 1))
 		BUG();
diff --git a/fs/bio.c b/fs/bio.c
index 41c93c7..b1fe82c 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -337,7 +337,7 @@
  *	RETURNS:
  *	Pointer to new bio on success, NULL on failure.
  */
-struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
 {
 	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
 
@@ -365,7 +365,7 @@
  *   %__GFP_WAIT, the allocation is guaranteed to succeed.
  *
  **/
-struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
+struct bio *bio_kmalloc(gfp_t gfp_mask, unsigned int nr_iovecs)
 {
 	struct bio *bio;
 
@@ -696,7 +696,8 @@
 	kfree(bmd);
 }
 
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+static struct bio_map_data *bio_alloc_map_data(int nr_segs,
+					       unsigned int iov_count,
 					       gfp_t gfp_mask)
 {
 	struct bio_map_data *bmd;
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 8855aad..22c64ff 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -683,7 +683,7 @@
 		return PTR_ERR(fspath);
 
 	if (fspath > fspath_min) {
-		ipath->fspath->val[i] = (u64)fspath;
+		ipath->fspath->val[i] = (u64)(unsigned long)fspath;
 		++ipath->fspath->elem_cnt;
 		ipath->fspath->bytes_left = fspath - fspath_min;
 	} else {
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 5a5d325..634608d2 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -147,14 +147,12 @@
 	 * the btrfs file release call will add this inode to the
 	 * ordered operations list so that we make sure to flush out any
 	 * new data the application may have written before commit.
-	 *
-	 * yes, its silly to have a single bitflag, but we might grow more
-	 * of these.
 	 */
 	unsigned ordered_data_close:1;
 	unsigned orphan_meta_reserved:1;
 	unsigned dummy_inode:1;
 	unsigned in_defrag:1;
+	unsigned delalloc_meta_reserved:1;
 
 	/*
 	 * always compress this one file
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 0fe615e..dede441 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -514,10 +514,25 @@
 				   struct btrfs_root *root,
 				   struct extent_buffer *buf)
 {
+	/* ensure we can see the force_cow */
+	smp_rmb();
+
+	/*
+	 * We do not need to cow a block if
+	 * 1) this block is not created or changed in this transaction;
+	 * 2) this block does not belong to TREE_RELOC tree;
+	 * 3) the root is not forced COW.
+	 *
+	 * What is forced COW:
+	 *    when we create snapshot during commiting the transaction,
+	 *    after we've finished coping src root, we must COW the shared
+	 *    block to ensure the metadata consistency.
+	 */
 	if (btrfs_header_generation(buf) == trans->transid &&
 	    !btrfs_header_flag(buf, BTRFS_HEADER_FLAG_WRITTEN) &&
 	    !(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID &&
-	      btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
+	      btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)) &&
+	    !root->force_cow)
 		return 0;
 	return 1;
 }
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index b9ba59f..04a5dfc 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -848,7 +848,8 @@
 enum btrfs_caching_type {
 	BTRFS_CACHE_NO		= 0,
 	BTRFS_CACHE_STARTED	= 1,
-	BTRFS_CACHE_FINISHED	= 2,
+	BTRFS_CACHE_FAST	= 2,
+	BTRFS_CACHE_FINISHED	= 3,
 };
 
 enum btrfs_disk_cache_state {
@@ -1271,6 +1272,8 @@
 	 * for stat.  It may be used for more later
 	 */
 	dev_t anon_dev;
+
+	int force_cow;
 };
 
 struct btrfs_ioctl_defrag_range_args {
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 3a1b939..5b16357 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -617,12 +617,14 @@
 static int btrfs_delayed_inode_reserve_metadata(
 					struct btrfs_trans_handle *trans,
 					struct btrfs_root *root,
+					struct inode *inode,
 					struct btrfs_delayed_node *node)
 {
 	struct btrfs_block_rsv *src_rsv;
 	struct btrfs_block_rsv *dst_rsv;
 	u64 num_bytes;
 	int ret;
+	int release = false;
 
 	src_rsv = trans->block_rsv;
 	dst_rsv = &root->fs_info->delayed_block_rsv;
@@ -652,12 +654,65 @@
 		if (!ret)
 			node->bytes_reserved = num_bytes;
 		return ret;
+	} else if (src_rsv == &root->fs_info->delalloc_block_rsv) {
+		spin_lock(&BTRFS_I(inode)->lock);
+		if (BTRFS_I(inode)->delalloc_meta_reserved) {
+			BTRFS_I(inode)->delalloc_meta_reserved = 0;
+			spin_unlock(&BTRFS_I(inode)->lock);
+			release = true;
+			goto migrate;
+		}
+		spin_unlock(&BTRFS_I(inode)->lock);
+
+		/* Ok we didn't have space pre-reserved.  This shouldn't happen
+		 * too often but it can happen if we do delalloc to an existing
+		 * inode which gets dirtied because of the time update, and then
+		 * isn't touched again until after the transaction commits and
+		 * then we try to write out the data.  First try to be nice and
+		 * reserve something strictly for us.  If not be a pain and try
+		 * to steal from the delalloc block rsv.
+		 */
+		ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
+		if (!ret)
+			goto out;
+
+		ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+		if (!ret)
+			goto out;
+
+		/*
+		 * Ok this is a problem, let's just steal from the global rsv
+		 * since this really shouldn't happen that often.
+		 */
+		WARN_ON(1);
+		ret = btrfs_block_rsv_migrate(&root->fs_info->global_block_rsv,
+					      dst_rsv, num_bytes);
+		goto out;
 	}
 
+migrate:
 	ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
+
+out:
+	/*
+	 * Migrate only takes a reservation, it doesn't touch the size of the
+	 * block_rsv.  This is to simplify people who don't normally have things
+	 * migrated from their block rsv.  If they go to release their
+	 * reservation, that will decrease the size as well, so if migrate
+	 * reduced size we'd end up with a negative size.  But for the
+	 * delalloc_meta_reserved stuff we will only know to drop 1 reservation,
+	 * but we could in fact do this reserve/migrate dance several times
+	 * between the time we did the original reservation and we'd clean it
+	 * up.  So to take care of this, release the space for the meta
+	 * reservation here.  I think it may be time for a documentation page on
+	 * how block rsvs. work.
+	 */
 	if (!ret)
 		node->bytes_reserved = num_bytes;
 
+	if (release)
+		btrfs_block_rsv_release(root, src_rsv, num_bytes);
+
 	return ret;
 }
 
@@ -1708,7 +1763,8 @@
 		goto release_node;
 	}
 
-	ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node);
+	ret = btrfs_delayed_inode_reserve_metadata(trans, root, inode,
+						   delayed_node);
 	if (ret)
 		goto release_node;
 
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 102c176..632f8f3 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -620,7 +620,7 @@
 
 static int btree_io_failed_hook(struct bio *failed_bio,
 			 struct page *page, u64 start, u64 end,
-			 u64 mirror_num, struct extent_state *state)
+			 int mirror_num, struct extent_state *state)
 {
 	struct extent_io_tree *tree;
 	unsigned long len;
@@ -1890,31 +1890,32 @@
 	u64 features;
 	struct btrfs_key location;
 	struct buffer_head *bh;
-	struct btrfs_root *extent_root = kzalloc(sizeof(struct btrfs_root),
-						 GFP_NOFS);
-	struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
-						 GFP_NOFS);
+	struct btrfs_super_block *disk_super;
 	struct btrfs_root *tree_root = btrfs_sb(sb);
-	struct btrfs_fs_info *fs_info = NULL;
-	struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
-						GFP_NOFS);
-	struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
-					      GFP_NOFS);
+	struct btrfs_fs_info *fs_info = tree_root->fs_info;
+	struct btrfs_root *extent_root;
+	struct btrfs_root *csum_root;
+	struct btrfs_root *chunk_root;
+	struct btrfs_root *dev_root;
 	struct btrfs_root *log_tree_root;
-
 	int ret;
 	int err = -EINVAL;
 	int num_backups_tried = 0;
 	int backup_index = 0;
 
-	struct btrfs_super_block *disk_super;
+	extent_root = fs_info->extent_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	csum_root = fs_info->csum_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	chunk_root = fs_info->chunk_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	dev_root = fs_info->dev_root =
+		kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
 
-	if (!extent_root || !tree_root || !tree_root->fs_info ||
-	    !chunk_root || !dev_root || !csum_root) {
+	if (!extent_root || !csum_root || !chunk_root || !dev_root) {
 		err = -ENOMEM;
 		goto fail;
 	}
-	fs_info = tree_root->fs_info;
 
 	ret = init_srcu_struct(&fs_info->subvol_srcu);
 	if (ret) {
@@ -1954,12 +1955,6 @@
 	mutex_init(&fs_info->reloc_mutex);
 
 	init_completion(&fs_info->kobj_unregister);
-	fs_info->tree_root = tree_root;
-	fs_info->extent_root = extent_root;
-	fs_info->csum_root = csum_root;
-	fs_info->chunk_root = chunk_root;
-	fs_info->dev_root = dev_root;
-	fs_info->fs_devices = fs_devices;
 	INIT_LIST_HEAD(&fs_info->dirty_cowonly_roots);
 	INIT_LIST_HEAD(&fs_info->space_info);
 	btrfs_mapping_init(&fs_info->mapping_tree);
@@ -2465,21 +2460,20 @@
 	btrfs_stop_workers(&fs_info->caching_workers);
 fail_alloc:
 fail_iput:
+	btrfs_mapping_tree_free(&fs_info->mapping_tree);
+
 	invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
 	iput(fs_info->btree_inode);
-
-	btrfs_close_devices(fs_info->fs_devices);
-	btrfs_mapping_tree_free(&fs_info->mapping_tree);
 fail_bdi:
 	bdi_destroy(&fs_info->bdi);
 fail_srcu:
 	cleanup_srcu_struct(&fs_info->subvol_srcu);
 fail:
+	btrfs_close_devices(fs_info->fs_devices);
 	free_fs_info(fs_info);
 	return ERR_PTR(err);
 
 recovery_tree_root:
-
 	if (!btrfs_test_opt(tree_root, RECOVERY))
 		goto fail_tree_roots;
 
@@ -2579,22 +2573,10 @@
 	int errors = 0;
 	u32 crc;
 	u64 bytenr;
-	int last_barrier = 0;
 
 	if (max_mirrors == 0)
 		max_mirrors = BTRFS_SUPER_MIRROR_MAX;
 
-	/* make sure only the last submit_bh does a barrier */
-	if (do_barriers) {
-		for (i = 0; i < max_mirrors; i++) {
-			bytenr = btrfs_sb_offset(i);
-			if (bytenr + BTRFS_SUPER_INFO_SIZE >=
-			    device->total_bytes)
-				break;
-			last_barrier = i;
-		}
-	}
-
 	for (i = 0; i < max_mirrors; i++) {
 		bytenr = btrfs_sb_offset(i);
 		if (bytenr + BTRFS_SUPER_INFO_SIZE >= device->total_bytes)
@@ -2640,17 +2622,136 @@
 			bh->b_end_io = btrfs_end_buffer_write_sync;
 		}
 
-		if (i == last_barrier && do_barriers)
-			ret = submit_bh(WRITE_FLUSH_FUA, bh);
-		else
-			ret = submit_bh(WRITE_SYNC, bh);
-
+		/*
+		 * we fua the first super.  The others we allow
+		 * to go down lazy.
+		 */
+		ret = submit_bh(WRITE_FUA, bh);
 		if (ret)
 			errors++;
 	}
 	return errors < i ? 0 : -1;
 }
 
+/*
+ * endio for the write_dev_flush, this will wake anyone waiting
+ * for the barrier when it is done
+ */
+static void btrfs_end_empty_barrier(struct bio *bio, int err)
+{
+	if (err) {
+		if (err == -EOPNOTSUPP)
+			set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);
+		clear_bit(BIO_UPTODATE, &bio->bi_flags);
+	}
+	if (bio->bi_private)
+		complete(bio->bi_private);
+	bio_put(bio);
+}
+
+/*
+ * trigger flushes for one the devices.  If you pass wait == 0, the flushes are
+ * sent down.  With wait == 1, it waits for the previous flush.
+ *
+ * any device where the flush fails with eopnotsupp are flagged as not-barrier
+ * capable
+ */
+static int write_dev_flush(struct btrfs_device *device, int wait)
+{
+	struct bio *bio;
+	int ret = 0;
+
+	if (device->nobarriers)
+		return 0;
+
+	if (wait) {
+		bio = device->flush_bio;
+		if (!bio)
+			return 0;
+
+		wait_for_completion(&device->flush_wait);
+
+		if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
+			printk("btrfs: disabling barriers on dev %s\n",
+			       device->name);
+			device->nobarriers = 1;
+		}
+		if (!bio_flagged(bio, BIO_UPTODATE)) {
+			ret = -EIO;
+		}
+
+		/* drop the reference from the wait == 0 run */
+		bio_put(bio);
+		device->flush_bio = NULL;
+
+		return ret;
+	}
+
+	/*
+	 * one reference for us, and we leave it for the
+	 * caller
+	 */
+	device->flush_bio = NULL;;
+	bio = bio_alloc(GFP_NOFS, 0);
+	if (!bio)
+		return -ENOMEM;
+
+	bio->bi_end_io = btrfs_end_empty_barrier;
+	bio->bi_bdev = device->bdev;
+	init_completion(&device->flush_wait);
+	bio->bi_private = &device->flush_wait;
+	device->flush_bio = bio;
+
+	bio_get(bio);
+	submit_bio(WRITE_FLUSH, bio);
+
+	return 0;
+}
+
+/*
+ * send an empty flush down to each device in parallel,
+ * then wait for them
+ */
+static int barrier_all_devices(struct btrfs_fs_info *info)
+{
+	struct list_head *head;
+	struct btrfs_device *dev;
+	int errors = 0;
+	int ret;
+
+	/* send down all the barriers */
+	head = &info->fs_devices->devices;
+	list_for_each_entry_rcu(dev, head, dev_list) {
+		if (!dev->bdev) {
+			errors++;
+			continue;
+		}
+		if (!dev->in_fs_metadata || !dev->writeable)
+			continue;
+
+		ret = write_dev_flush(dev, 0);
+		if (ret)
+			errors++;
+	}
+
+	/* wait for all the barriers */
+	list_for_each_entry_rcu(dev, head, dev_list) {
+		if (!dev->bdev) {
+			errors++;
+			continue;
+		}
+		if (!dev->in_fs_metadata || !dev->writeable)
+			continue;
+
+		ret = write_dev_flush(dev, 1);
+		if (ret)
+			errors++;
+	}
+	if (errors)
+		return -EIO;
+	return 0;
+}
+
 int write_all_supers(struct btrfs_root *root, int max_mirrors)
 {
 	struct list_head *head;
@@ -2672,6 +2773,10 @@
 
 	mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
 	head = &root->fs_info->fs_devices->devices;
+
+	if (do_barriers)
+		barrier_all_devices(root->fs_info);
+
 	list_for_each_entry_rcu(dev, head, dev_list) {
 		if (!dev->bdev) {
 			total_errors++;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 9879bd4..930ae89 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -467,13 +467,59 @@
 			     struct btrfs_root *root,
 			     int load_cache_only)
 {
+	DEFINE_WAIT(wait);
 	struct btrfs_fs_info *fs_info = cache->fs_info;
 	struct btrfs_caching_control *caching_ctl;
 	int ret = 0;
 
-	smp_mb();
-	if (cache->cached != BTRFS_CACHE_NO)
+	caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS);
+	BUG_ON(!caching_ctl);
+
+	INIT_LIST_HEAD(&caching_ctl->list);
+	mutex_init(&caching_ctl->mutex);
+	init_waitqueue_head(&caching_ctl->wait);
+	caching_ctl->block_group = cache;
+	caching_ctl->progress = cache->key.objectid;
+	atomic_set(&caching_ctl->count, 1);
+	caching_ctl->work.func = caching_thread;
+
+	spin_lock(&cache->lock);
+	/*
+	 * This should be a rare occasion, but this could happen I think in the
+	 * case where one thread starts to load the space cache info, and then
+	 * some other thread starts a transaction commit which tries to do an
+	 * allocation while the other thread is still loading the space cache
+	 * info.  The previous loop should have kept us from choosing this block
+	 * group, but if we've moved to the state where we will wait on caching
+	 * block groups we need to first check if we're doing a fast load here,
+	 * so we can wait for it to finish, otherwise we could end up allocating
+	 * from a block group who's cache gets evicted for one reason or
+	 * another.
+	 */
+	while (cache->cached == BTRFS_CACHE_FAST) {
+		struct btrfs_caching_control *ctl;
+
+		ctl = cache->caching_ctl;
+		atomic_inc(&ctl->count);
+		prepare_to_wait(&ctl->wait, &wait, TASK_UNINTERRUPTIBLE);
+		spin_unlock(&cache->lock);
+
+		schedule();
+
+		finish_wait(&ctl->wait, &wait);
+		put_caching_control(ctl);
+		spin_lock(&cache->lock);
+	}
+
+	if (cache->cached != BTRFS_CACHE_NO) {
+		spin_unlock(&cache->lock);
+		kfree(caching_ctl);
 		return 0;
+	}
+	WARN_ON(cache->caching_ctl);
+	cache->caching_ctl = caching_ctl;
+	cache->cached = BTRFS_CACHE_FAST;
+	spin_unlock(&cache->lock);
 
 	/*
 	 * We can't do the read from on-disk cache during a commit since we need
@@ -484,56 +530,51 @@
 	if (trans && (!trans->transaction->in_commit) &&
 	    (root && root != root->fs_info->tree_root) &&
 	    btrfs_test_opt(root, SPACE_CACHE)) {
-		spin_lock(&cache->lock);
-		if (cache->cached != BTRFS_CACHE_NO) {
-			spin_unlock(&cache->lock);
-			return 0;
-		}
-		cache->cached = BTRFS_CACHE_STARTED;
-		spin_unlock(&cache->lock);
-
 		ret = load_free_space_cache(fs_info, cache);
 
 		spin_lock(&cache->lock);
 		if (ret == 1) {
+			cache->caching_ctl = NULL;
 			cache->cached = BTRFS_CACHE_FINISHED;
 			cache->last_byte_to_unpin = (u64)-1;
 		} else {
-			cache->cached = BTRFS_CACHE_NO;
+			if (load_cache_only) {
+				cache->caching_ctl = NULL;
+				cache->cached = BTRFS_CACHE_NO;
+			} else {
+				cache->cached = BTRFS_CACHE_STARTED;
+			}
 		}
 		spin_unlock(&cache->lock);
+		wake_up(&caching_ctl->wait);
 		if (ret == 1) {
+			put_caching_control(caching_ctl);
 			free_excluded_extents(fs_info->extent_root, cache);
 			return 0;
 		}
-	}
-
-	if (load_cache_only)
-		return 0;
-
-	caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_NOFS);
-	BUG_ON(!caching_ctl);
-
-	INIT_LIST_HEAD(&caching_ctl->list);
-	mutex_init(&caching_ctl->mutex);
-	init_waitqueue_head(&caching_ctl->wait);
-	caching_ctl->block_group = cache;
-	caching_ctl->progress = cache->key.objectid;
-	/* one for caching kthread, one for caching block group list */
-	atomic_set(&caching_ctl->count, 2);
-	caching_ctl->work.func = caching_thread;
-
-	spin_lock(&cache->lock);
-	if (cache->cached != BTRFS_CACHE_NO) {
+	} else {
+		/*
+		 * We are not going to do the fast caching, set cached to the
+		 * appropriate value and wakeup any waiters.
+		 */
+		spin_lock(&cache->lock);
+		if (load_cache_only) {
+			cache->caching_ctl = NULL;
+			cache->cached = BTRFS_CACHE_NO;
+		} else {
+			cache->cached = BTRFS_CACHE_STARTED;
+		}
 		spin_unlock(&cache->lock);
-		kfree(caching_ctl);
+		wake_up(&caching_ctl->wait);
+	}
+
+	if (load_cache_only) {
+		put_caching_control(caching_ctl);
 		return 0;
 	}
-	cache->caching_ctl = caching_ctl;
-	cache->cached = BTRFS_CACHE_STARTED;
-	spin_unlock(&cache->lock);
 
 	down_write(&fs_info->extent_commit_sem);
+	atomic_inc(&caching_ctl->count);
 	list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups);
 	up_write(&fs_info->extent_commit_sem);
 
@@ -3797,16 +3838,16 @@
 	kfree(rsv);
 }
 
-int btrfs_block_rsv_add(struct btrfs_root *root,
-			struct btrfs_block_rsv *block_rsv,
-			u64 num_bytes)
+static inline int __block_rsv_add(struct btrfs_root *root,
+				  struct btrfs_block_rsv *block_rsv,
+				  u64 num_bytes, int flush)
 {
 	int ret;
 
 	if (num_bytes == 0)
 		return 0;
 
-	ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 1);
+	ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
 	if (!ret) {
 		block_rsv_add_bytes(block_rsv, num_bytes, 1);
 		return 0;
@@ -3815,22 +3856,18 @@
 	return ret;
 }
 
+int btrfs_block_rsv_add(struct btrfs_root *root,
+			struct btrfs_block_rsv *block_rsv,
+			u64 num_bytes)
+{
+	return __block_rsv_add(root, block_rsv, num_bytes, 1);
+}
+
 int btrfs_block_rsv_add_noflush(struct btrfs_root *root,
 				struct btrfs_block_rsv *block_rsv,
 				u64 num_bytes)
 {
-	int ret;
-
-	if (num_bytes == 0)
-		return 0;
-
-	ret = reserve_metadata_bytes(root, block_rsv, num_bytes, 0);
-	if (!ret) {
-		block_rsv_add_bytes(block_rsv, num_bytes, 1);
-		return 0;
-	}
-
-	return ret;
+	return __block_rsv_add(root, block_rsv, num_bytes, 0);
 }
 
 int btrfs_block_rsv_check(struct btrfs_root *root,
@@ -4064,23 +4101,30 @@
  */
 static unsigned drop_outstanding_extent(struct inode *inode)
 {
+	unsigned drop_inode_space = 0;
 	unsigned dropped_extents = 0;
 
 	BUG_ON(!BTRFS_I(inode)->outstanding_extents);
 	BTRFS_I(inode)->outstanding_extents--;
 
+	if (BTRFS_I(inode)->outstanding_extents == 0 &&
+	    BTRFS_I(inode)->delalloc_meta_reserved) {
+		drop_inode_space = 1;
+		BTRFS_I(inode)->delalloc_meta_reserved = 0;
+	}
+
 	/*
 	 * If we have more or the same amount of outsanding extents than we have
 	 * reserved then we need to leave the reserved extents count alone.
 	 */
 	if (BTRFS_I(inode)->outstanding_extents >=
 	    BTRFS_I(inode)->reserved_extents)
-		return 0;
+		return drop_inode_space;
 
 	dropped_extents = BTRFS_I(inode)->reserved_extents -
 		BTRFS_I(inode)->outstanding_extents;
 	BTRFS_I(inode)->reserved_extents -= dropped_extents;
-	return dropped_extents;
+	return dropped_extents + drop_inode_space;
 }
 
 /**
@@ -4166,9 +4210,18 @@
 		nr_extents = BTRFS_I(inode)->outstanding_extents -
 			BTRFS_I(inode)->reserved_extents;
 		BTRFS_I(inode)->reserved_extents += nr_extents;
-
-		to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
 	}
+
+	/*
+	 * Add an item to reserve for updating the inode when we complete the
+	 * delalloc io.
+	 */
+	if (!BTRFS_I(inode)->delalloc_meta_reserved) {
+		nr_extents++;
+		BTRFS_I(inode)->delalloc_meta_reserved = 1;
+	}
+
+	to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
 	to_reserve += calc_csum_metadata_size(inode, num_bytes, 1);
 	spin_unlock(&BTRFS_I(inode)->lock);
 
@@ -5166,13 +5219,15 @@
 		}
 
 have_block_group:
-		if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+		cached = block_group_cache_done(block_group);
+		if (unlikely(!cached)) {
 			u64 free_percent;
 
+			found_uncached_bg = true;
 			ret = cache_block_group(block_group, trans,
 						orig_root, 1);
 			if (block_group->cached == BTRFS_CACHE_FINISHED)
-				goto have_block_group;
+				goto alloc;
 
 			free_percent = btrfs_block_group_used(&block_group->item);
 			free_percent *= 100;
@@ -5194,7 +5249,6 @@
 							orig_root, 0);
 				BUG_ON(ret);
 			}
-			found_uncached_bg = true;
 
 			/*
 			 * If loop is set for cached only, try the next block
@@ -5204,10 +5258,7 @@
 				goto loop;
 		}
 
-		cached = block_group_cache_done(block_group);
-		if (unlikely(!cached))
-			found_uncached_bg = true;
-
+alloc:
 		if (unlikely(block_group->ro))
 			goto loop;
 
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 1f87c4d..9472d3d 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2285,8 +2285,8 @@
 				clean_io_failure(start, page);
 		}
 		if (!uptodate) {
-			u64 failed_mirror;
-			failed_mirror = (u64)bio->bi_bdev;
+			int failed_mirror;
+			failed_mirror = (int)(unsigned long)bio->bi_bdev;
 			if (tree->ops && tree->ops->readpage_io_failed_hook)
 				ret = tree->ops->readpage_io_failed_hook(
 						bio, page, start, end,
@@ -3366,6 +3366,9 @@
 		return -ENOMEM;
 	path->leave_spinning = 1;
 
+	start = ALIGN(start, BTRFS_I(inode)->root->sectorsize);
+	len = ALIGN(len, BTRFS_I(inode)->root->sectorsize);
+
 	/*
 	 * lookup the last file extent.  We're not using i_size here
 	 * because there might be preallocation past i_size
@@ -3413,7 +3416,7 @@
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
 			 &cached_state, GFP_NOFS);
 
-	em = get_extent_skip_holes(inode, off, last_for_get_extent,
+	em = get_extent_skip_holes(inode, start, last_for_get_extent,
 				   get_extent);
 	if (!em)
 		goto out;
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index feb9be0..7604c30 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -70,7 +70,7 @@
 			      unsigned long bio_flags);
 	int (*readpage_io_hook)(struct page *page, u64 start, u64 end);
 	int (*readpage_io_failed_hook)(struct bio *bio, struct page *page,
-				       u64 start, u64 end, u64 failed_mirror,
+				       u64 start, u64 end, int failed_mirror,
 				       struct extent_state *state);
 	int (*writepage_io_failed_hook)(struct bio *bio, struct page *page,
 					u64 start, u64 end,
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 7a15fcf..6e5b7e4 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -351,6 +351,11 @@
 		}
 	}
 
+	for (i = 0; i < io_ctl->num_pages; i++) {
+		clear_page_dirty_for_io(io_ctl->pages[i]);
+		set_page_extent_mapped(io_ctl->pages[i]);
+	}
+
 	return 0;
 }
 
@@ -537,6 +542,13 @@
 			    struct btrfs_free_space *entry, u8 *type)
 {
 	struct btrfs_free_space_entry *e;
+	int ret;
+
+	if (!io_ctl->cur) {
+		ret = io_ctl_check_crc(io_ctl, io_ctl->index);
+		if (ret)
+			return ret;
+	}
 
 	e = io_ctl->cur;
 	entry->offset = le64_to_cpu(e->offset);
@@ -550,10 +562,7 @@
 
 	io_ctl_unmap_page(io_ctl);
 
-	if (io_ctl->index >= io_ctl->num_pages)
-		return 0;
-
-	return io_ctl_check_crc(io_ctl, io_ctl->index);
+	return 0;
 }
 
 static int io_ctl_read_bitmap(struct io_ctl *io_ctl,
@@ -561,9 +570,6 @@
 {
 	int ret;
 
-	if (io_ctl->cur && io_ctl->cur != io_ctl->orig)
-		io_ctl_unmap_page(io_ctl);
-
 	ret = io_ctl_check_crc(io_ctl, io_ctl->index);
 	if (ret)
 		return ret;
@@ -699,6 +705,8 @@
 		num_entries--;
 	}
 
+	io_ctl_unmap_page(&io_ctl);
+
 	/*
 	 * We add the bitmaps at the end of the entries in order that
 	 * the bitmap entries are added to the cache.
@@ -1841,7 +1849,13 @@
 		info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset),
 					  1, 0);
 		if (!info) {
-			WARN_ON(1);
+			/* the tree logging code might be calling us before we
+			 * have fully loaded the free space rbtree for this
+			 * block group.  So it is possible the entry won't
+			 * be in the rbtree yet at all.  The caching code
+			 * will make sure not to put it in the rbtree if
+			 * the logging code has pinned it.
+			 */
 			goto out_lock;
 		}
 	}
@@ -2448,16 +2462,23 @@
 {
 	struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
 	struct btrfs_free_space *entry;
-	struct rb_node *node;
 	int ret = -ENOSPC;
+	u64 bitmap_offset = offset_to_bitmap(ctl, offset);
 
 	if (ctl->total_bitmaps == 0)
 		return -ENOSPC;
 
 	/*
-	 * First check our cached list of bitmaps and see if there is an entry
-	 * here that will work.
+	 * The bitmap that covers offset won't be in the list unless offset
+	 * is just its start offset.
 	 */
+	entry = list_first_entry(bitmaps, struct btrfs_free_space, list);
+	if (entry->offset != bitmap_offset) {
+		entry = tree_search_offset(ctl, bitmap_offset, 1, 0);
+		if (entry && list_empty(&entry->list))
+			list_add(&entry->list, bitmaps);
+	}
+
 	list_for_each_entry(entry, bitmaps, list) {
 		if (entry->bytes < min_bytes)
 			continue;
@@ -2468,38 +2489,10 @@
 	}
 
 	/*
-	 * If we do have entries on our list and we are here then we didn't find
-	 * anything, so go ahead and get the next entry after the last entry in
-	 * this list and start the search from there.
+	 * The bitmaps list has all the bitmaps that record free space
+	 * starting after offset, so no more search is required.
 	 */
-	if (!list_empty(bitmaps)) {
-		entry = list_entry(bitmaps->prev, struct btrfs_free_space,
-				   list);
-		node = rb_next(&entry->offset_index);
-		if (!node)
-			return -ENOSPC;
-		entry = rb_entry(node, struct btrfs_free_space, offset_index);
-		goto search;
-	}
-
-	entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1);
-	if (!entry)
-		return -ENOSPC;
-
-search:
-	node = &entry->offset_index;
-	do {
-		entry = rb_entry(node, struct btrfs_free_space, offset_index);
-		node = rb_next(&entry->offset_index);
-		if (!entry->bitmap)
-			continue;
-		if (entry->bytes < min_bytes)
-			continue;
-		ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset,
-					   bytes, min_bytes);
-	} while (ret && node);
-
-	return ret;
+	return -ENOSPC;
 }
 
 /*
@@ -2517,8 +2510,8 @@
 			     u64 offset, u64 bytes, u64 empty_size)
 {
 	struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
-	struct list_head bitmaps;
 	struct btrfs_free_space *entry, *tmp;
+	LIST_HEAD(bitmaps);
 	u64 min_bytes;
 	int ret;
 
@@ -2557,7 +2550,6 @@
 		goto out;
 	}
 
-	INIT_LIST_HEAD(&bitmaps);
 	ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset,
 				      bytes, min_bytes);
 	if (ret)
diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index 53dcbdf..f8962a9 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -398,6 +398,8 @@
 	struct btrfs_free_space_ctl *ctl = root->free_ino_ctl;
 	struct btrfs_path *path;
 	struct inode *inode;
+	struct btrfs_block_rsv *rsv;
+	u64 num_bytes;
 	u64 alloc_hint = 0;
 	int ret;
 	int prealloc;
@@ -421,11 +423,26 @@
 	if (!path)
 		return -ENOMEM;
 
+	rsv = trans->block_rsv;
+	trans->block_rsv = &root->fs_info->trans_block_rsv;
+
+	num_bytes = trans->bytes_reserved;
+	/*
+	 * 1 item for inode item insertion if need
+	 * 3 items for inode item update (in the worst case)
+	 * 1 item for free space object
+	 * 3 items for pre-allocation
+	 */
+	trans->bytes_reserved = btrfs_calc_trans_metadata_size(root, 8);
+	ret = btrfs_block_rsv_add_noflush(root, trans->block_rsv,
+					  trans->bytes_reserved);
+	if (ret)
+		goto out;
 again:
 	inode = lookup_free_ino_inode(root, path);
 	if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) {
 		ret = PTR_ERR(inode);
-		goto out;
+		goto out_release;
 	}
 
 	if (IS_ERR(inode)) {
@@ -434,7 +451,7 @@
 
 		ret = create_free_ino_inode(root, trans, path);
 		if (ret)
-			goto out;
+			goto out_release;
 		goto again;
 	}
 
@@ -477,11 +494,14 @@
 	}
 	btrfs_free_reserved_data_space(inode, prealloc);
 
+	ret = btrfs_write_out_ino_cache(root, trans, path);
 out_put:
 	iput(inode);
+out_release:
+	btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
 out:
-	if (ret == 0)
-		ret = btrfs_write_out_ino_cache(root, trans, path);
+	trans->block_rsv = rsv;
+	trans->bytes_reserved = num_bytes;
 
 	btrfs_free_path(path);
 	return ret;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 966ddcc..526dd51 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -93,6 +93,8 @@
 				   struct page *locked_page,
 				   u64 start, u64 end, int *page_started,
 				   unsigned long *nr_written, int unlock);
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root, struct inode *inode);
 
 static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
 				     struct inode *inode,  struct inode *dir,
@@ -1741,7 +1743,7 @@
 				trans = btrfs_join_transaction(root);
 			BUG_ON(IS_ERR(trans));
 			trans->block_rsv = &root->fs_info->delalloc_block_rsv;
-			ret = btrfs_update_inode(trans, root, inode);
+			ret = btrfs_update_inode_fallback(trans, root, inode);
 			BUG_ON(ret);
 		}
 		goto out;
@@ -1791,7 +1793,7 @@
 
 	ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
 	if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
-		ret = btrfs_update_inode(trans, root, inode);
+		ret = btrfs_update_inode_fallback(trans, root, inode);
 		BUG_ON(ret);
 	}
 	ret = 0;
@@ -2199,6 +2201,9 @@
 		if (ret)
 			goto out;
 	}
+	/* release the path since we're done with it */
+	btrfs_release_path(path);
+
 	root->orphan_cleanup_state = ORPHAN_CLEANUP_DONE;
 
 	if (root->orphan_block_rsv)
@@ -2426,7 +2431,7 @@
 /*
  * copy everything in the in-memory inode into the btree.
  */
-noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+static noinline int btrfs_update_inode_item(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root, struct inode *inode)
 {
 	struct btrfs_inode_item *inode_item;
@@ -2434,21 +2439,6 @@
 	struct extent_buffer *leaf;
 	int ret;
 
-	/*
-	 * If the inode is a free space inode, we can deadlock during commit
-	 * if we put it into the delayed code.
-	 *
-	 * The data relocation inode should also be directly updated
-	 * without delay
-	 */
-	if (!btrfs_is_free_space_inode(root, inode)
-	    && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
-		ret = btrfs_delayed_update_inode(trans, root, inode);
-		if (!ret)
-			btrfs_set_inode_last_trans(trans, inode);
-		return ret;
-	}
-
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
@@ -2477,6 +2467,43 @@
 }
 
 /*
+ * copy everything in the in-memory inode into the btree.
+ */
+noinline int btrfs_update_inode(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root, struct inode *inode)
+{
+	int ret;
+
+	/*
+	 * If the inode is a free space inode, we can deadlock during commit
+	 * if we put it into the delayed code.
+	 *
+	 * The data relocation inode should also be directly updated
+	 * without delay
+	 */
+	if (!btrfs_is_free_space_inode(root, inode)
+	    && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
+		ret = btrfs_delayed_update_inode(trans, root, inode);
+		if (!ret)
+			btrfs_set_inode_last_trans(trans, inode);
+		return ret;
+	}
+
+	return btrfs_update_inode_item(trans, root, inode);
+}
+
+static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+				struct btrfs_root *root, struct inode *inode)
+{
+	int ret;
+
+	ret = btrfs_update_inode(trans, root, inode);
+	if (ret == -ENOSPC)
+		return btrfs_update_inode_item(trans, root, inode);
+	return ret;
+}
+
+/*
  * unlink helper that gets used here in inode.c and in the tree logging
  * recovery code.  It remove a link in a directory with a given name, and
  * also drops the back refs in the inode to the directory
@@ -5632,7 +5659,7 @@
 	if (test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags)) {
 		ret = btrfs_ordered_update_i_size(inode, 0, ordered);
 		if (!ret)
-			err = btrfs_update_inode(trans, root, inode);
+			err = btrfs_update_inode_fallback(trans, root, inode);
 		goto out;
 	}
 
@@ -5670,7 +5697,7 @@
 	add_pending_csums(trans, inode, ordered->file_offset, &ordered->list);
 	ret = btrfs_ordered_update_i_size(inode, 0, ordered);
 	if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags))
-		btrfs_update_inode(trans, root, inode);
+		btrfs_update_inode_fallback(trans, root, inode);
 	ret = 0;
 out_unlock:
 	unlock_extent_cached(&BTRFS_I(inode)->io_tree, ordered->file_offset,
@@ -6529,14 +6556,16 @@
 		ret = btrfs_orphan_del(NULL, inode);
 	}
 
-	trans->block_rsv = &root->fs_info->trans_block_rsv;
-	ret = btrfs_update_inode(trans, root, inode);
-	if (ret && !err)
-		err = ret;
+	if (trans) {
+		trans->block_rsv = &root->fs_info->trans_block_rsv;
+		ret = btrfs_update_inode(trans, root, inode);
+		if (ret && !err)
+			err = ret;
 
-	nr = trans->blocks_used;
-	ret = btrfs_end_transaction_throttle(trans, root);
-	btrfs_btree_balance_dirty(root, nr);
+		nr = trans->blocks_used;
+		ret = btrfs_end_transaction_throttle(trans, root);
+		btrfs_btree_balance_dirty(root, nr);
+	}
 
 out:
 	btrfs_free_block_rsv(root, rsv);
@@ -6605,6 +6634,7 @@
 	ei->orphan_meta_reserved = 0;
 	ei->dummy_inode = 0;
 	ei->in_defrag = 0;
+	ei->delalloc_meta_reserved = 0;
 	ei->force_compress = BTRFS_COMPRESS_NONE;
 
 	ei->delayed_node = NULL;
@@ -6764,11 +6794,13 @@
 			 struct dentry *dentry, struct kstat *stat)
 {
 	struct inode *inode = dentry->d_inode;
+	u32 blocksize = inode->i_sb->s_blocksize;
+
 	generic_fillattr(inode, stat);
 	stat->dev = BTRFS_I(inode)->root->anon_dev;
 	stat->blksize = PAGE_CACHE_SIZE;
-	stat->blocks = (inode_get_bytes(inode) +
-			BTRFS_I(inode)->delalloc_bytes) >> 9;
+	stat->blocks = (ALIGN(inode_get_bytes(inode), blocksize) +
+		ALIGN(BTRFS_I(inode)->delalloc_bytes, blocksize)) >> 9;
 	return 0;
 }
 
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 4a34c47..a90e749 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1216,12 +1216,12 @@
 		*devstr = '\0';
 		devstr = vol_args->name;
 		devid = simple_strtoull(devstr, &end, 10);
-		printk(KERN_INFO "resizing devid %llu\n",
+		printk(KERN_INFO "btrfs: resizing devid %llu\n",
 		       (unsigned long long)devid);
 	}
 	device = btrfs_find_device(root, devid, NULL, NULL);
 	if (!device) {
-		printk(KERN_INFO "resizer unable to find device %llu\n",
+		printk(KERN_INFO "btrfs: resizer unable to find device %llu\n",
 		       (unsigned long long)devid);
 		ret = -EINVAL;
 		goto out_unlock;
@@ -1267,7 +1267,7 @@
 	do_div(new_size, root->sectorsize);
 	new_size *= root->sectorsize;
 
-	printk(KERN_INFO "new size for %s is %llu\n",
+	printk(KERN_INFO "btrfs: new size for %s is %llu\n",
 		device->name, (unsigned long long)new_size);
 
 	if (new_size > old_size) {
@@ -2930,11 +2930,13 @@
 		goto out;
 
 	for (i = 0; i < ipath->fspath->elem_cnt; ++i) {
-		rel_ptr = ipath->fspath->val[i] - (u64)ipath->fspath->val;
+		rel_ptr = ipath->fspath->val[i] -
+			  (u64)(unsigned long)ipath->fspath->val;
 		ipath->fspath->val[i] = rel_ptr;
 	}
 
-	ret = copy_to_user((void *)ipa->fspath, (void *)ipath->fspath, size);
+	ret = copy_to_user((void *)(unsigned long)ipa->fspath,
+			   (void *)(unsigned long)ipath->fspath, size);
 	if (ret) {
 		ret = -EFAULT;
 		goto out;
@@ -3017,7 +3019,8 @@
 	if (ret < 0)
 		goto out;
 
-	ret = copy_to_user((void *)loi->inodes, (void *)inodes, size);
+	ret = copy_to_user((void *)(unsigned long)loi->inodes,
+			   (void *)(unsigned long)inodes, size);
 	if (ret)
 		ret = -EFAULT;
 
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 24d654c..dff29d5 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1174,6 +1174,8 @@
 			list_add_tail(&new_edge->list[UPPER],
 				      &new_node->lower);
 		}
+	} else {
+		list_add_tail(&new_node->lower, &cache->leaves);
 	}
 
 	rb_node = tree_insert(&cache->rb_root, new_node->bytenr,
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index ed11d38..fab420d 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -272,7 +272,7 @@
 			swarn->logical, swarn->dev->name,
 			(unsigned long long)swarn->sector, root, inum, offset,
 			min(isize - offset, (u64)PAGE_SIZE), nlink,
-			(char *)ipath->fspath->val[i]);
+			(char *)(unsigned long)ipath->fspath->val[i]);
 
 	free_ipath(ipath);
 	return 0;
@@ -944,50 +944,18 @@
 static int scrub_submit(struct scrub_dev *sdev)
 {
 	struct scrub_bio *sbio;
-	struct bio *bio;
-	int i;
 
 	if (sdev->curr == -1)
 		return 0;
 
 	sbio = sdev->bios[sdev->curr];
-
-	bio = bio_alloc(GFP_NOFS, sbio->count);
-	if (!bio)
-		goto nomem;
-
-	bio->bi_private = sbio;
-	bio->bi_end_io = scrub_bio_end_io;
-	bio->bi_bdev = sdev->dev->bdev;
-	bio->bi_sector = sbio->physical >> 9;
-
-	for (i = 0; i < sbio->count; ++i) {
-		struct page *page;
-		int ret;
-
-		page = alloc_page(GFP_NOFS);
-		if (!page)
-			goto nomem;
-
-		ret = bio_add_page(bio, page, PAGE_SIZE, 0);
-		if (!ret) {
-			__free_page(page);
-			goto nomem;
-		}
-	}
-
 	sbio->err = 0;
 	sdev->curr = -1;
 	atomic_inc(&sdev->in_flight);
 
-	submit_bio(READ, bio);
+	submit_bio(READ, sbio->bio);
 
 	return 0;
-
-nomem:
-	scrub_free_bio(bio);
-
-	return -ENOMEM;
 }
 
 static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len,
@@ -995,6 +963,8 @@
 		      u8 *csum, int force)
 {
 	struct scrub_bio *sbio;
+	struct page *page;
+	int ret;
 
 again:
 	/*
@@ -1015,12 +985,22 @@
 	}
 	sbio = sdev->bios[sdev->curr];
 	if (sbio->count == 0) {
+		struct bio *bio;
+
 		sbio->physical = physical;
 		sbio->logical = logical;
+		bio = bio_alloc(GFP_NOFS, SCRUB_PAGES_PER_BIO);
+		if (!bio)
+			return -ENOMEM;
+
+		bio->bi_private = sbio;
+		bio->bi_end_io = scrub_bio_end_io;
+		bio->bi_bdev = sdev->dev->bdev;
+		bio->bi_sector = sbio->physical >> 9;
+		sbio->err = 0;
+		sbio->bio = bio;
 	} else if (sbio->physical + sbio->count * PAGE_SIZE != physical ||
 		   sbio->logical + sbio->count * PAGE_SIZE != logical) {
-		int ret;
-
 		ret = scrub_submit(sdev);
 		if (ret)
 			return ret;
@@ -1030,6 +1010,20 @@
 	sbio->spag[sbio->count].generation = gen;
 	sbio->spag[sbio->count].have_csum = 0;
 	sbio->spag[sbio->count].mirror_num = mirror_num;
+
+	page = alloc_page(GFP_NOFS);
+	if (!page)
+		return -ENOMEM;
+
+	ret = bio_add_page(sbio->bio, page, PAGE_SIZE, 0);
+	if (!ret) {
+		__free_page(page);
+		ret = scrub_submit(sdev);
+		if (ret)
+			return ret;
+		goto again;
+	}
+
 	if (csum) {
 		sbio->spag[sbio->count].have_csum = 1;
 		memcpy(sbio->spag[sbio->count].csum, csum, sdev->csum_size);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 57080df..17ee7fc 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -197,7 +197,7 @@
 	{Opt_subvolrootid, "subvolrootid=%d"},
 	{Opt_defrag, "autodefrag"},
 	{Opt_inode_cache, "inode_cache"},
-	{Opt_no_space_cache, "no_space_cache"},
+	{Opt_no_space_cache, "nospace_cache"},
 	{Opt_recovery, "recovery"},
 	{Opt_err, NULL},
 };
@@ -448,6 +448,7 @@
 		token = match_token(p, tokens, args);
 		switch (token) {
 		case Opt_subvol:
+			kfree(*subvol_name);
 			*subvol_name = match_strdup(&args[0]);
 			break;
 		case Opt_subvolid:
@@ -710,7 +711,7 @@
 	if (btrfs_test_opt(root, SPACE_CACHE))
 		seq_puts(seq, ",space_cache");
 	else
-		seq_puts(seq, ",no_space_cache");
+		seq_puts(seq, ",nospace_cache");
 	if (btrfs_test_opt(root, CLEAR_CACHE))
 		seq_puts(seq, ",clear_cache");
 	if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
@@ -824,13 +825,9 @@
 static struct dentry *mount_subvol(const char *subvol_name, int flags,
 				   const char *device_name, char *data)
 {
-	struct super_block *s;
 	struct dentry *root;
 	struct vfsmount *mnt;
-	struct mnt_namespace *ns_private;
 	char *newargs;
-	struct path path;
-	int error;
 
 	newargs = setup_root_args(data);
 	if (!newargs)
@@ -841,39 +838,17 @@
 	if (IS_ERR(mnt))
 		return ERR_CAST(mnt);
 
-	ns_private = create_mnt_ns(mnt);
-	if (IS_ERR(ns_private)) {
-		mntput(mnt);
-		return ERR_CAST(ns_private);
-	}
+	root = mount_subtree(mnt, subvol_name);
 
-	/*
-	 * This will trigger the automount of the subvol so we can just
-	 * drop the mnt we have here and return the dentry that we
-	 * found.
-	 */
-	error = vfs_path_lookup(mnt->mnt_root, mnt, subvol_name,
-				LOOKUP_FOLLOW, &path);
-	put_mnt_ns(ns_private);
-	if (error)
-		return ERR_PTR(error);
-
-	if (!is_subvolume_inode(path.dentry->d_inode)) {
-		path_put(&path);
-		mntput(mnt);
-		error = -EINVAL;
+	if (!IS_ERR(root) && !is_subvolume_inode(root->d_inode)) {
+		struct super_block *s = root->d_sb;
+		dput(root);
+		root = ERR_PTR(-EINVAL);
+		deactivate_locked_super(s);
 		printk(KERN_ERR "btrfs: '%s' is not a valid subvolume\n",
 				subvol_name);
-		return ERR_PTR(-EINVAL);
 	}
 
-	/* Get a ref to the sb and the dentry we found and return it */
-	s = path.mnt->mnt_sb;
-	atomic_inc(&s->s_active);
-	root = dget(path.dentry);
-	path_put(&path);
-	down_write(&s->s_umount);
-
 	return root;
 }
 
@@ -890,7 +865,6 @@
 	struct super_block *s;
 	struct dentry *root;
 	struct btrfs_fs_devices *fs_devices = NULL;
-	struct btrfs_root *tree_root = NULL;
 	struct btrfs_fs_info *fs_info = NULL;
 	fmode_t mode = FMODE_READ;
 	char *subvol_name = NULL;
@@ -904,8 +878,10 @@
 	error = btrfs_parse_early_options(data, mode, fs_type,
 					  &subvol_name, &subvol_objectid,
 					  &subvol_rootid, &fs_devices);
-	if (error)
+	if (error) {
+		kfree(subvol_name);
 		return ERR_PTR(error);
+	}
 
 	if (subvol_name) {
 		root = mount_subvol(subvol_name, flags, device_name, data);
@@ -917,15 +893,6 @@
 	if (error)
 		return ERR_PTR(error);
 
-	error = btrfs_open_devices(fs_devices, mode, fs_type);
-	if (error)
-		return ERR_PTR(error);
-
-	if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
-		error = -EACCES;
-		goto error_close_devices;
-	}
-
 	/*
 	 * Setup a dummy root and fs_info for test/set super.  This is because
 	 * we don't actually fill this stuff out until open_ctree, but we need
@@ -933,24 +900,36 @@
 	 * then open_ctree will properly initialize everything later.
 	 */
 	fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
-	tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
-	if (!fs_info || !tree_root) {
+	if (!fs_info)
+		return ERR_PTR(-ENOMEM);
+
+	fs_info->tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	if (!fs_info->tree_root) {
 		error = -ENOMEM;
-		goto error_close_devices;
+		goto error_fs_info;
 	}
-	fs_info->tree_root = tree_root;
+	fs_info->tree_root->fs_info = fs_info;
 	fs_info->fs_devices = fs_devices;
-	tree_root->fs_info = fs_info;
 
 	fs_info->super_copy = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
 	fs_info->super_for_commit = kzalloc(BTRFS_SUPER_INFO_SIZE, GFP_NOFS);
 	if (!fs_info->super_copy || !fs_info->super_for_commit) {
 		error = -ENOMEM;
+		goto error_fs_info;
+	}
+
+	error = btrfs_open_devices(fs_devices, mode, fs_type);
+	if (error)
+		goto error_fs_info;
+
+	if (!(flags & MS_RDONLY) && fs_devices->rw_devices == 0) {
+		error = -EACCES;
 		goto error_close_devices;
 	}
 
 	bdev = fs_devices->latest_bdev;
-	s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
+	s = sget(fs_type, btrfs_test_super, btrfs_set_super,
+		 fs_info->tree_root);
 	if (IS_ERR(s)) {
 		error = PTR_ERR(s);
 		goto error_close_devices;
@@ -959,12 +938,12 @@
 	if (s->s_root) {
 		if ((flags ^ s->s_flags) & MS_RDONLY) {
 			deactivate_locked_super(s);
-			return ERR_PTR(-EBUSY);
+			error = -EBUSY;
+			goto error_close_devices;
 		}
 
 		btrfs_close_devices(fs_devices);
 		free_fs_info(fs_info);
-		kfree(tree_root);
 	} else {
 		char b[BDEVNAME_SIZE];
 
@@ -991,8 +970,8 @@
 
 error_close_devices:
 	btrfs_close_devices(fs_devices);
+error_fs_info:
 	free_fs_info(fs_info);
-	kfree(tree_root);
 	return ERR_PTR(error);
 }
 
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 960835e..81376d9 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -785,6 +785,10 @@
 
 			btrfs_save_ino_cache(root, trans);
 
+			/* see comments in should_cow_block() */
+			root->force_cow = 0;
+			smp_wmb();
+
 			if (root->commit_root != root->node) {
 				mutex_lock(&root->fs_commit_mutex);
 				switch_commit_root(root);
@@ -882,8 +886,8 @@
 	btrfs_reloc_pre_snapshot(trans, pending, &to_reserve);
 
 	if (to_reserve > 0) {
-		ret = btrfs_block_rsv_add(root, &pending->block_rsv,
-					  to_reserve);
+		ret = btrfs_block_rsv_add_noflush(root, &pending->block_rsv,
+						  to_reserve);
 		if (ret) {
 			pending->error = ret;
 			goto fail;
@@ -947,6 +951,10 @@
 	btrfs_tree_unlock(old);
 	free_extent_buffer(old);
 
+	/* see comments in should_cow_block() */
+	root->force_cow = 1;
+	smp_wmb();
+
 	btrfs_set_root_node(new_root_item, tmp);
 	/* record when the snapshot was created in key.offset */
 	key.offset = trans->transid;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index f8e29431..c37433d 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -999,7 +999,7 @@
 	key.objectid = device->devid;
 	key.offset = start;
 	key.type = BTRFS_DEV_EXTENT_KEY;
-
+again:
 	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
 	if (ret > 0) {
 		ret = btrfs_previous_item(root, path, key.objectid,
@@ -1012,6 +1012,9 @@
 					struct btrfs_dev_extent);
 		BUG_ON(found_key.offset > start || found_key.offset +
 		       btrfs_dev_extent_length(leaf, extent) < start);
+		key = found_key;
+		btrfs_release_path(path);
+		goto again;
 	} else if (ret == 0) {
 		leaf = path->nodes[0];
 		extent = btrfs_item_ptr(leaf, path->slots[0],
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index ab5b1c4..78f2d4d 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -100,6 +100,12 @@
 	struct reada_zone *reada_curr_zone;
 	struct radix_tree_root reada_zones;
 	struct radix_tree_root reada_extents;
+
+	/* for sending down flush barriers */
+	struct bio *flush_bio;
+	struct completion flush_wait;
+	int nobarriers;
+
 };
 
 struct btrfs_fs_devices {
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 2abd0df..bca3948 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -1143,7 +1143,7 @@
 {
 	struct ceph_dentry_info *di;
 
-	dout("d_release %p\n", dentry);
+	dout("ceph_d_prune %p\n", dentry);
 
 	/* do we have a valid parent? */
 	if (!dentry->d_parent || IS_ROOT(dentry))
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index e392bfc..116f365 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1328,12 +1328,13 @@
  */
 void ceph_queue_writeback(struct inode *inode)
 {
+	ihold(inode);
 	if (queue_work(ceph_inode_to_client(inode)->wb_wq,
 		       &ceph_inode(inode)->i_wb_work)) {
 		dout("ceph_queue_writeback %p\n", inode);
-		ihold(inode);
 	} else {
 		dout("ceph_queue_writeback %p failed\n", inode);
+		iput(inode);
 	}
 }
 
@@ -1353,12 +1354,13 @@
  */
 void ceph_queue_invalidate(struct inode *inode)
 {
+	ihold(inode);
 	if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
 		       &ceph_inode(inode)->i_pg_inv_work)) {
 		dout("ceph_queue_invalidate %p\n", inode);
-		ihold(inode);
 	} else {
 		dout("ceph_queue_invalidate %p failed\n", inode);
+		iput(inode);
 	}
 }
 
@@ -1434,13 +1436,14 @@
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 
+	ihold(inode);
 	if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
 		       &ci->i_vmtruncate_work)) {
 		dout("ceph_queue_vmtruncate %p\n", inode);
-		ihold(inode);
 	} else {
 		dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
 		     inode, ci->i_truncate_pending);
+		iput(inode);
 	}
 }
 
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index a90846f..8dc73a5 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -638,10 +638,12 @@
 	if (err == 0) {
 		dout("open_root_inode success\n");
 		if (ceph_ino(req->r_target_inode) == CEPH_INO_ROOT &&
-		    fsc->sb->s_root == NULL)
+		    fsc->sb->s_root == NULL) {
 			root = d_alloc_root(req->r_target_inode);
-		else
+			ceph_init_dentry(root);
+		} else {
 			root = d_obtain_alias(req->r_target_inode);
+		}
 		req->r_target_inode = NULL;
 		dout("open_root_inode success, root dentry is %p\n", root);
 	} else {
diff --git a/fs/dcache.c b/fs/dcache.c
index a901c69..10ba92d 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -36,6 +36,7 @@
 #include <linux/bit_spinlock.h>
 #include <linux/rculist_bl.h>
 #include <linux/prefetch.h>
+#include <linux/ratelimit.h>
 #include "internal.h"
 
 /*
@@ -2383,8 +2384,16 @@
 				actual = __d_unalias(inode, dentry, alias);
 			}
 			write_sequnlock(&rename_lock);
-			if (IS_ERR(actual))
+			if (IS_ERR(actual)) {
+				if (PTR_ERR(actual) == -ELOOP)
+					pr_warn_ratelimited(
+						"VFS: Lookup of '%s' in %s %s"
+						" would have caused loop\n",
+						dentry->d_name.name,
+						inode->i_sb->s_type->name,
+						inode->i_sb->s_id);
 				dput(alias);
+			}
 			goto out_nolock;
 		}
 	}
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 58609bd..2a83425 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -967,7 +967,7 @@
 
 /**
  * ecryptfs_new_file_context
- * @ecryptfs_dentry: The eCryptfs dentry
+ * @ecryptfs_inode: The eCryptfs inode
  *
  * If the crypto context for the file has not yet been established,
  * this is where we do that.  Establishing a new crypto context
@@ -984,13 +984,13 @@
  *
  * Returns zero on success; non-zero otherwise
  */
-int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry)
+int ecryptfs_new_file_context(struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
-	    &ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+	    &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
 	    &ecryptfs_superblock_to_private(
-		    ecryptfs_dentry->d_sb)->mount_crypt_stat;
+		    ecryptfs_inode->i_sb)->mount_crypt_stat;
 	int cipher_name_len;
 	int rc = 0;
 
@@ -1299,12 +1299,12 @@
 }
 
 static int
-ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry,
+ecryptfs_write_metadata_to_contents(struct inode *ecryptfs_inode,
 				    char *virt, size_t virt_len)
 {
 	int rc;
 
-	rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
+	rc = ecryptfs_write_lower(ecryptfs_inode, virt,
 				  0, virt_len);
 	if (rc < 0)
 		printk(KERN_ERR "%s: Error attempting to write header "
@@ -1338,7 +1338,8 @@
 
 /**
  * ecryptfs_write_metadata
- * @ecryptfs_dentry: The eCryptfs dentry
+ * @ecryptfs_dentry: The eCryptfs dentry, which should be negative
+ * @ecryptfs_inode: The newly created eCryptfs inode
  *
  * Write the file headers out.  This will likely involve a userspace
  * callout, in which the session key is encrypted with one or more
@@ -1348,10 +1349,11 @@
  *
  * Returns zero on success; non-zero on error
  */
-int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry)
+int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry,
+			    struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
-		&ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+		&ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	unsigned int order;
 	char *virt;
 	size_t virt_len;
@@ -1391,7 +1393,7 @@
 		rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt,
 						      size);
 	else
-		rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt,
+		rc = ecryptfs_write_metadata_to_contents(ecryptfs_inode, virt,
 							 virt_len);
 	if (rc) {
 		printk(KERN_ERR "%s: Error writing metadata out to lower file; "
@@ -1943,7 +1945,7 @@
 
 /* We could either offset on every reverse map or just pad some 0x00's
  * at the front here */
-static const unsigned char filename_rev_map[] = {
+static const unsigned char filename_rev_map[256] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 7 */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 15 */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 23 */
@@ -1959,7 +1961,7 @@
 	0x00, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, /* 103 */
 	0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, 0x33, 0x34, /* 111 */
 	0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, /* 119 */
-	0x3D, 0x3E, 0x3F
+	0x3D, 0x3E, 0x3F /* 123 - 255 initialized to 0x00 */
 };
 
 /**
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 54481a3..a9f29b1 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -584,9 +584,10 @@
 int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode);
 int ecryptfs_encrypt_page(struct page *page);
 int ecryptfs_decrypt_page(struct page *page);
-int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry);
+int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry,
+			    struct inode *ecryptfs_inode);
 int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry);
-int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry);
+int ecryptfs_new_file_context(struct inode *ecryptfs_inode);
 void ecryptfs_write_crypt_stat_flags(char *page_virt,
 				     struct ecryptfs_crypt_stat *crypt_stat,
 				     size_t *written);
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index c6ac98c..d3f95f9 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -139,6 +139,27 @@
 	return rc;
 }
 
+static void ecryptfs_vma_close(struct vm_area_struct *vma)
+{
+	filemap_write_and_wait(vma->vm_file->f_mapping);
+}
+
+static const struct vm_operations_struct ecryptfs_file_vm_ops = {
+	.close		= ecryptfs_vma_close,
+	.fault		= filemap_fault,
+};
+
+static int ecryptfs_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	int rc;
+
+	rc = generic_file_mmap(file, vma);
+	if (!rc)
+		vma->vm_ops = &ecryptfs_file_vm_ops;
+
+	return rc;
+}
+
 struct kmem_cache *ecryptfs_file_info_cache;
 
 /**
@@ -349,7 +370,7 @@
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = ecryptfs_compat_ioctl,
 #endif
-	.mmap = generic_file_mmap,
+	.mmap = ecryptfs_file_mmap,
 	.open = ecryptfs_open,
 	.flush = ecryptfs_flush,
 	.release = ecryptfs_release,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index a36d327..32f90a3a 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -172,22 +172,23 @@
  * it. It will also update the eCryptfs directory inode to mimic the
  * stat of the lower directory inode.
  *
- * Returns zero on success; non-zero on error condition
+ * Returns the new eCryptfs inode on success; an ERR_PTR on error condition
  */
-static int
+static struct inode *
 ecryptfs_do_create(struct inode *directory_inode,
 		   struct dentry *ecryptfs_dentry, int mode)
 {
 	int rc;
 	struct dentry *lower_dentry;
 	struct dentry *lower_dir_dentry;
+	struct inode *inode;
 
 	lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
 	lower_dir_dentry = lock_parent(lower_dentry);
 	if (IS_ERR(lower_dir_dentry)) {
 		ecryptfs_printk(KERN_ERR, "Error locking directory of "
 				"dentry\n");
-		rc = PTR_ERR(lower_dir_dentry);
+		inode = ERR_CAST(lower_dir_dentry);
 		goto out;
 	}
 	rc = ecryptfs_create_underlying_file(lower_dir_dentry->d_inode,
@@ -195,20 +196,19 @@
 	if (rc) {
 		printk(KERN_ERR "%s: Failure to create dentry in lower fs; "
 		       "rc = [%d]\n", __func__, rc);
+		inode = ERR_PTR(rc);
 		goto out_lock;
 	}
-	rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry,
-				directory_inode->i_sb);
-	if (rc) {
-		ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n");
+	inode = __ecryptfs_get_inode(lower_dentry->d_inode,
+				     directory_inode->i_sb);
+	if (IS_ERR(inode))
 		goto out_lock;
-	}
 	fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode);
 	fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode);
 out_lock:
 	unlock_dir(lower_dir_dentry);
 out:
-	return rc;
+	return inode;
 }
 
 /**
@@ -219,26 +219,26 @@
  *
  * Returns zero on success
  */
-static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry)
+static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry,
+				    struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_crypt_stat *crypt_stat =
-		&ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+		&ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	int rc = 0;
 
-	if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
+	if (S_ISDIR(ecryptfs_inode->i_mode)) {
 		ecryptfs_printk(KERN_DEBUG, "This is a directory\n");
 		crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
 		goto out;
 	}
 	ecryptfs_printk(KERN_DEBUG, "Initializing crypto context\n");
-	rc = ecryptfs_new_file_context(ecryptfs_dentry);
+	rc = ecryptfs_new_file_context(ecryptfs_inode);
 	if (rc) {
 		ecryptfs_printk(KERN_ERR, "Error creating new file "
 				"context; rc = [%d]\n", rc);
 		goto out;
 	}
-	rc = ecryptfs_get_lower_file(ecryptfs_dentry,
-				     ecryptfs_dentry->d_inode);
+	rc = ecryptfs_get_lower_file(ecryptfs_dentry, ecryptfs_inode);
 	if (rc) {
 		printk(KERN_ERR "%s: Error attempting to initialize "
 			"the lower file for the dentry with name "
@@ -246,10 +246,10 @@
 			ecryptfs_dentry->d_name.name, rc);
 		goto out;
 	}
-	rc = ecryptfs_write_metadata(ecryptfs_dentry);
+	rc = ecryptfs_write_metadata(ecryptfs_dentry, ecryptfs_inode);
 	if (rc)
 		printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc);
-	ecryptfs_put_lower_file(ecryptfs_dentry->d_inode);
+	ecryptfs_put_lower_file(ecryptfs_inode);
 out:
 	return rc;
 }
@@ -269,18 +269,28 @@
 ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry,
 		int mode, struct nameidata *nd)
 {
+	struct inode *ecryptfs_inode;
 	int rc;
 
-	/* ecryptfs_do_create() calls ecryptfs_interpose() */
-	rc = ecryptfs_do_create(directory_inode, ecryptfs_dentry, mode);
-	if (unlikely(rc)) {
+	ecryptfs_inode = ecryptfs_do_create(directory_inode, ecryptfs_dentry,
+					    mode);
+	if (unlikely(IS_ERR(ecryptfs_inode))) {
 		ecryptfs_printk(KERN_WARNING, "Failed to create file in"
 				"lower filesystem\n");
+		rc = PTR_ERR(ecryptfs_inode);
 		goto out;
 	}
 	/* At this point, a file exists on "disk"; we need to make sure
 	 * that this on disk file is prepared to be an ecryptfs file */
-	rc = ecryptfs_initialize_file(ecryptfs_dentry);
+	rc = ecryptfs_initialize_file(ecryptfs_dentry, ecryptfs_inode);
+	if (rc) {
+		drop_nlink(ecryptfs_inode);
+		unlock_new_inode(ecryptfs_inode);
+		iput(ecryptfs_inode);
+		goto out;
+	}
+	d_instantiate(ecryptfs_dentry, ecryptfs_inode);
+	unlock_new_inode(ecryptfs_inode);
 out:
 	return rc;
 }
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index f6dba45..12ccacd 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -565,7 +565,7 @@
 	brelse(bitmap_bh);
 	printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
 	       ", computed = %llu, %llu\n",
-	       EXT4_B2C(sbi, ext4_free_blocks_count(es)),
+	       EXT4_B2C(EXT4_SB(sb), ext4_free_blocks_count(es)),
 	       desc_count, bitmap_count);
 	return bitmap_count;
 #else
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 240f6e2..fffec40 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2270,6 +2270,7 @@
 			ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
 			       "%ld pages, ino %lu; err %d", __func__,
 				wbc->nr_to_write, inode->i_ino, ret);
+			blk_finish_plug(&plug);
 			goto out_writepages;
 		}
 
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 9953d80..3858767 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1683,7 +1683,9 @@
 			data_opt = EXT4_MOUNT_WRITEBACK_DATA;
 		datacheck:
 			if (is_remount) {
-				if (test_opt(sb, DATA_FLAGS) != data_opt) {
+				if (!sbi->s_journal)
+					ext4_msg(sb, KERN_WARNING, "Remounting file system with no journal so ignoring journalled data option");
+				else if (test_opt(sb, DATA_FLAGS) != data_opt) {
 					ext4_msg(sb, KERN_ERR,
 						"Cannot change data mode on remount");
 					return 0;
@@ -3099,8 +3101,6 @@
 }
 
 static int ext4_fill_super(struct super_block *sb, void *data, int silent)
-				__releases(kernel_lock)
-				__acquires(kernel_lock)
 {
 	char *orig_data = kstrdup(data, GFP_KERNEL);
 	struct buffer_head *bh;
diff --git a/fs/hfs/trans.c b/fs/hfs/trans.c
index e673a88..b1ce4c7 100644
--- a/fs/hfs/trans.c
+++ b/fs/hfs/trans.c
@@ -40,6 +40,8 @@
 
 	src = in->name;
 	srclen = in->len;
+	if (srclen > HFS_NAMELEN)
+		srclen = HFS_NAMELEN;
 	dst = out;
 	dstlen = HFS_MAX_NAMELEN;
 	if (nls_io) {
diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c
index 3f32bcb..ef175cb 100644
--- a/fs/minix/bitmap.c
+++ b/fs/minix/bitmap.c
@@ -16,38 +16,26 @@
 #include <linux/bitops.h>
 #include <linux/sched.h>
 
-static const int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 };
-
 static DEFINE_SPINLOCK(bitmap_lock);
 
-static unsigned long count_free(struct buffer_head *map[], unsigned numblocks, __u32 numbits)
+/*
+ * bitmap consists of blocks filled with 16bit words
+ * bit set == busy, bit clear == free
+ * endianness is a mess, but for counting zero bits it really doesn't matter...
+ */
+static __u32 count_free(struct buffer_head *map[], unsigned blocksize, __u32 numbits)
 {
-	unsigned i, j, sum = 0;
-	struct buffer_head *bh;
-  
-	for (i=0; i<numblocks-1; i++) {
-		if (!(bh=map[i])) 
-			return(0);
-		for (j=0; j<bh->b_size; j++)
-			sum += nibblemap[bh->b_data[j] & 0xf]
-				+ nibblemap[(bh->b_data[j]>>4) & 0xf];
+	__u32 sum = 0;
+	unsigned blocks = DIV_ROUND_UP(numbits, blocksize * 8);
+
+	while (blocks--) {
+		unsigned words = blocksize / 2;
+		__u16 *p = (__u16 *)(*map++)->b_data;
+		while (words--)
+			sum += 16 - hweight16(*p++);
 	}
 
-	if (numblocks==0 || !(bh=map[numblocks-1]))
-		return(0);
-	i = ((numbits - (numblocks-1) * bh->b_size * 8) / 16) * 2;
-	for (j=0; j<i; j++) {
-		sum += nibblemap[bh->b_data[j] & 0xf]
-			+ nibblemap[(bh->b_data[j]>>4) & 0xf];
-	}
-
-	i = numbits%16;
-	if (i!=0) {
-		i = *(__u16 *)(&bh->b_data[j]) | ~((1<<i) - 1);
-		sum += nibblemap[i & 0xf] + nibblemap[(i>>4) & 0xf];
-		sum += nibblemap[(i>>8) & 0xf] + nibblemap[(i>>12) & 0xf];
-	}
-	return(sum);
+	return sum;
 }
 
 void minix_free_block(struct inode *inode, unsigned long block)
@@ -105,10 +93,12 @@
 	return 0;
 }
 
-unsigned long minix_count_free_blocks(struct minix_sb_info *sbi)
+unsigned long minix_count_free_blocks(struct super_block *sb)
 {
-	return (count_free(sbi->s_zmap, sbi->s_zmap_blocks,
-		sbi->s_nzones - sbi->s_firstdatazone + 1)
+	struct minix_sb_info *sbi = minix_sb(sb);
+	u32 bits = sbi->s_nzones - (sbi->s_firstdatazone + 1);
+
+	return (count_free(sbi->s_zmap, sb->s_blocksize, bits)
 		<< sbi->s_log_zone_size);
 }
 
@@ -273,7 +263,10 @@
 	return inode;
 }
 
-unsigned long minix_count_free_inodes(struct minix_sb_info *sbi)
+unsigned long minix_count_free_inodes(struct super_block *sb)
 {
-	return count_free(sbi->s_imap, sbi->s_imap_blocks, sbi->s_ninodes + 1);
+	struct minix_sb_info *sbi = minix_sb(sb);
+	u32 bits = sbi->s_ninodes + 1;
+
+	return count_free(sbi->s_imap, sb->s_blocksize, bits);
 }
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 64cdcd6..1d9e339 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -279,6 +279,27 @@
  	else if (sbi->s_mount_state & MINIX_ERROR_FS)
 		printk("MINIX-fs: mounting file system with errors, "
 			"running fsck is recommended\n");
+
+	/* Apparently minix can create filesystems that allocate more blocks for
+	 * the bitmaps than needed.  We simply ignore that, but verify it didn't
+	 * create one with not enough blocks and bail out if so.
+	 */
+	block = minix_blocks_needed(sbi->s_ninodes, s->s_blocksize);
+	if (sbi->s_imap_blocks < block) {
+		printk("MINIX-fs: file system does not have enough "
+				"imap blocks allocated.  Refusing to mount\n");
+		goto out_iput;
+	}
+
+	block = minix_blocks_needed(
+			(sbi->s_nzones - (sbi->s_firstdatazone + 1)),
+			s->s_blocksize);
+	if (sbi->s_zmap_blocks < block) {
+		printk("MINIX-fs: file system does not have enough "
+				"zmap blocks allocated.  Refusing to mount.\n");
+		goto out_iput;
+	}
+
 	return 0;
 
 out_iput:
@@ -339,10 +360,10 @@
 	buf->f_type = sb->s_magic;
 	buf->f_bsize = sb->s_blocksize;
 	buf->f_blocks = (sbi->s_nzones - sbi->s_firstdatazone) << sbi->s_log_zone_size;
-	buf->f_bfree = minix_count_free_blocks(sbi);
+	buf->f_bfree = minix_count_free_blocks(sb);
 	buf->f_bavail = buf->f_bfree;
 	buf->f_files = sbi->s_ninodes;
-	buf->f_ffree = minix_count_free_inodes(sbi);
+	buf->f_ffree = minix_count_free_inodes(sb);
 	buf->f_namelen = sbi->s_namelen;
 	buf->f_fsid.val[0] = (u32)id;
 	buf->f_fsid.val[1] = (u32)(id >> 32);
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index 341e212..26bbd55 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -48,10 +48,10 @@
 extern struct minix2_inode * minix_V2_raw_inode(struct super_block *, ino_t, struct buffer_head **);
 extern struct inode * minix_new_inode(const struct inode *, int, int *);
 extern void minix_free_inode(struct inode * inode);
-extern unsigned long minix_count_free_inodes(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_inodes(struct super_block *sb);
 extern int minix_new_block(struct inode * inode);
 extern void minix_free_block(struct inode *inode, unsigned long block);
-extern unsigned long minix_count_free_blocks(struct minix_sb_info *sbi);
+extern unsigned long minix_count_free_blocks(struct super_block *sb);
 extern int minix_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 extern int minix_prepare_chunk(struct page *page, loff_t pos, unsigned len);
 
@@ -88,6 +88,11 @@
 	return list_entry(inode, struct minix_inode_info, vfs_inode);
 }
 
+static inline unsigned minix_blocks_needed(unsigned bits, unsigned blocksize)
+{
+	return DIV_ROUND_UP(bits, blocksize * 8);
+}
+
 #if defined(CONFIG_MINIX_FS_NATIVE_ENDIAN) && \
 	defined(CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED)
 
@@ -125,7 +130,7 @@
 	if (!size)
 		return 0;
 
-	size = (size >> 4) + ((size & 15) > 0);
+	size >>= 4;
 	while (*p++ == 0xffff) {
 		if (--size == 0)
 			return (p - addr) << 4;
diff --git a/fs/namespace.c b/fs/namespace.c
index e5e1c7d..6d3a196 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -2483,11 +2483,43 @@
 		__mnt_make_longterm(mnt);
 		new_ns->root = mnt;
 		list_add(&new_ns->list, &new_ns->root->mnt_list);
+	} else {
+		mntput(mnt);
 	}
 	return new_ns;
 }
 EXPORT_SYMBOL(create_mnt_ns);
 
+struct dentry *mount_subtree(struct vfsmount *mnt, const char *name)
+{
+	struct mnt_namespace *ns;
+	struct super_block *s;
+	struct path path;
+	int err;
+
+	ns = create_mnt_ns(mnt);
+	if (IS_ERR(ns))
+		return ERR_CAST(ns);
+
+	err = vfs_path_lookup(mnt->mnt_root, mnt,
+			name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
+
+	put_mnt_ns(ns);
+
+	if (err)
+		return ERR_PTR(err);
+
+	/* trade a vfsmount reference for active sb one */
+	s = path.mnt->mnt_sb;
+	atomic_inc(&s->s_active);
+	mntput(path.mnt);
+	/* lock the sucker */
+	down_write(&s->s_umount);
+	/* ... and return the root of (sub)tree on it */
+	return path.dentry;
+}
+EXPORT_SYMBOL(mount_subtree);
+
 SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
 		char __user *, type, unsigned long, flags, void __user *, data)
 {
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index b238d95..ac28990 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1468,12 +1468,12 @@
 				res = NULL;
 				goto out;
 			/* This turned out not to be a regular file */
+			case -EISDIR:
 			case -ENOTDIR:
 				goto no_open;
 			case -ELOOP:
 				if (!(nd->intent.open.flags & O_NOFOLLOW))
 					goto no_open;
-			/* case -EISDIR: */
 			/* case -EINVAL: */
 			default:
 				res = ERR_CAST(inode);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0a1f831..eca56d4 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -40,48 +40,8 @@
 
 #define NFSDBG_FACILITY		NFSDBG_FILE
 
-static int nfs_file_open(struct inode *, struct file *);
-static int nfs_file_release(struct inode *, struct file *);
-static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin);
-static int  nfs_file_mmap(struct file *, struct vm_area_struct *);
-static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos,
-					struct pipe_inode_info *pipe,
-					size_t count, unsigned int flags);
-static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov,
-				unsigned long nr_segs, loff_t pos);
-static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
-					struct file *filp, loff_t *ppos,
-					size_t count, unsigned int flags);
-static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov,
-				unsigned long nr_segs, loff_t pos);
-static int  nfs_file_flush(struct file *, fl_owner_t id);
-static int  nfs_file_fsync(struct file *, loff_t, loff_t, int datasync);
-static int nfs_check_flags(int flags);
-static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl);
-static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
-static int nfs_setlease(struct file *file, long arg, struct file_lock **fl);
-
 static const struct vm_operations_struct nfs_file_vm_ops;
 
-const struct file_operations nfs_file_operations = {
-	.llseek		= nfs_file_llseek,
-	.read		= do_sync_read,
-	.write		= do_sync_write,
-	.aio_read	= nfs_file_read,
-	.aio_write	= nfs_file_write,
-	.mmap		= nfs_file_mmap,
-	.open		= nfs_file_open,
-	.flush		= nfs_file_flush,
-	.release	= nfs_file_release,
-	.fsync		= nfs_file_fsync,
-	.lock		= nfs_lock,
-	.flock		= nfs_flock,
-	.splice_read	= nfs_file_splice_read,
-	.splice_write	= nfs_file_splice_write,
-	.check_flags	= nfs_check_flags,
-	.setlease	= nfs_setlease,
-};
-
 const struct inode_operations nfs_file_inode_operations = {
 	.permission	= nfs_permission,
 	.getattr	= nfs_getattr,
@@ -886,3 +846,54 @@
 			file->f_path.dentry->d_name.name, arg);
 	return -EINVAL;
 }
+
+const struct file_operations nfs_file_operations = {
+	.llseek		= nfs_file_llseek,
+	.read		= do_sync_read,
+	.write		= do_sync_write,
+	.aio_read	= nfs_file_read,
+	.aio_write	= nfs_file_write,
+	.mmap		= nfs_file_mmap,
+	.open		= nfs_file_open,
+	.flush		= nfs_file_flush,
+	.release	= nfs_file_release,
+	.fsync		= nfs_file_fsync,
+	.lock		= nfs_lock,
+	.flock		= nfs_flock,
+	.splice_read	= nfs_file_splice_read,
+	.splice_write	= nfs_file_splice_write,
+	.check_flags	= nfs_check_flags,
+	.setlease	= nfs_setlease,
+};
+
+#ifdef CONFIG_NFS_V4
+static int
+nfs4_file_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to
+	 * this point, then something is very wrong
+	 */
+	dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp);
+	return -ENOTDIR;
+}
+
+const struct file_operations nfs4_file_operations = {
+	.llseek		= nfs_file_llseek,
+	.read		= do_sync_read,
+	.write		= do_sync_write,
+	.aio_read	= nfs_file_read,
+	.aio_write	= nfs_file_write,
+	.mmap		= nfs_file_mmap,
+	.open		= nfs4_file_open,
+	.flush		= nfs_file_flush,
+	.release	= nfs_file_release,
+	.fsync		= nfs_file_fsync,
+	.lock		= nfs_lock,
+	.flock		= nfs_flock,
+	.splice_read	= nfs_file_splice_read,
+	.splice_write	= nfs_file_splice_write,
+	.check_flags	= nfs_check_flags,
+	.setlease	= nfs_setlease,
+};
+#endif /* CONFIG_NFS_V4 */
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index c07a55a..50a15fa 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -291,7 +291,7 @@
 		 */
 		inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops;
 		if (S_ISREG(inode->i_mode)) {
-			inode->i_fop = &nfs_file_operations;
+			inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops;
 			inode->i_data.a_ops = &nfs_file_aops;
 			inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info;
 		} else if (S_ISDIR(inode->i_mode)) {
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index c1a1bd8..3f4d957 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -299,6 +299,8 @@
 extern int nfs_generic_pagein(struct nfs_pageio_descriptor *desc,
 		struct list_head *head);
 
+extern void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio,
+		struct inode *inode);
 extern void nfs_pageio_reset_read_mds(struct nfs_pageio_descriptor *pgio);
 extern void nfs_readdata_release(struct nfs_read_data *rdata);
 
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 85f1690..d4bc9ed9 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -853,6 +853,7 @@
 	.dentry_ops	= &nfs_dentry_operations,
 	.dir_inode_ops	= &nfs3_dir_inode_operations,
 	.file_inode_ops	= &nfs3_file_inode_operations,
+	.file_ops	= &nfs_file_operations,
 	.getroot	= nfs3_proc_get_root,
 	.getattr	= nfs3_proc_getattr,
 	.setattr	= nfs3_proc_setattr,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index b60fddf..be2bbac 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2464,8 +2464,7 @@
 		case -NFS4ERR_BADNAME:
 			return -ENOENT;
 		case -NFS4ERR_MOVED:
-			err = nfs4_get_referral(dir, name, fattr, fhandle);
-			break;
+			return nfs4_get_referral(dir, name, fattr, fhandle);
 		case -NFS4ERR_WRONGSEC:
 			nfs_fixup_secinfo_attributes(fattr, fhandle);
 		}
@@ -6253,6 +6252,7 @@
 	.dentry_ops	= &nfs4_dentry_operations,
 	.dir_inode_ops	= &nfs4_dir_inode_operations,
 	.file_inode_ops	= &nfs4_file_inode_operations,
+	.file_ops	= &nfs4_file_operations,
 	.getroot	= nfs4_proc_get_root,
 	.getattr	= nfs4_proc_getattr,
 	.setattr	= nfs4_proc_setattr,
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index baf7353..8e672a2 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -1260,6 +1260,25 @@
 }
 EXPORT_SYMBOL_GPL(pnfs_generic_pg_writepages);
 
+static void pnfs_ld_handle_read_error(struct nfs_read_data *data)
+{
+	struct nfs_pageio_descriptor pgio;
+
+	put_lseg(data->lseg);
+	data->lseg = NULL;
+	dprintk("pnfs write error = %d\n", data->pnfs_error);
+
+	nfs_pageio_init_read_mds(&pgio, data->inode);
+
+	while (!list_empty(&data->pages)) {
+		struct nfs_page *req = nfs_list_entry(data->pages.next);
+
+		nfs_list_remove_request(req);
+		nfs_pageio_add_request(&pgio, req);
+	}
+	nfs_pageio_complete(&pgio);
+}
+
 /*
  * Called by non rpc-based layout drivers
  */
@@ -1268,11 +1287,8 @@
 	if (likely(!data->pnfs_error)) {
 		__nfs4_read_done_cb(data);
 		data->mds_ops->rpc_call_done(&data->task, data);
-	} else {
-		put_lseg(data->lseg);
-		data->lseg = NULL;
-		dprintk("pnfs write error = %d\n", data->pnfs_error);
-	}
+	} else
+		pnfs_ld_handle_read_error(data);
 	data->mds_ops->rpc_release(data);
 }
 EXPORT_SYMBOL_GPL(pnfs_ld_read_done);
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index ac40b85..f48125d 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -710,6 +710,7 @@
 	.dentry_ops	= &nfs_dentry_operations,
 	.dir_inode_ops	= &nfs_dir_inode_operations,
 	.file_inode_ops	= &nfs_file_inode_operations,
+	.file_ops	= &nfs_file_operations,
 	.getroot	= nfs_proc_get_root,
 	.getattr	= nfs_proc_getattr,
 	.setattr	= nfs_proc_setattr,
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 8b48ec6..cfa175c 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -109,7 +109,7 @@
 	}
 }
 
-static void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio,
+void nfs_pageio_init_read_mds(struct nfs_pageio_descriptor *pgio,
 		struct inode *inode)
 {
 	nfs_pageio_init(pgio, inode, &nfs_pageio_read_ops,
@@ -534,23 +534,13 @@
 static void nfs_readpage_release_full(void *calldata)
 {
 	struct nfs_read_data *data = calldata;
-	struct nfs_pageio_descriptor pgio;
 
-	if (data->pnfs_error) {
-		nfs_pageio_init_read_mds(&pgio, data->inode);
-		pgio.pg_recoalesce = 1;
-	}
 	while (!list_empty(&data->pages)) {
 		struct nfs_page *req = nfs_list_entry(data->pages.next);
 
 		nfs_list_remove_request(req);
-		if (!data->pnfs_error)
-			nfs_readpage_release(req);
-		else
-			nfs_pageio_add_request(&pgio, req);
+		nfs_readpage_release(req);
 	}
-	if (data->pnfs_error)
-		nfs_pageio_complete(&pgio);
 	nfs_readdata_release(calldata);
 }
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 480b3b6..1347774 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2787,43 +2787,18 @@
 static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt,
 		const char *export_path)
 {
-	struct mnt_namespace *ns_private;
-	struct super_block *s;
 	struct dentry *dentry;
-	struct path path;
-	int ret;
+	int ret = nfs_referral_loop_protect();
 
-	ns_private = create_mnt_ns(root_mnt);
-	ret = PTR_ERR(ns_private);
-	if (IS_ERR(ns_private))
-		goto out_mntput;
+	if (ret) {
+		mntput(root_mnt);
+		return ERR_PTR(ret);
+	}
 
-	ret = nfs_referral_loop_protect();
-	if (ret != 0)
-		goto out_put_mnt_ns;
-
-	ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
-			export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
-
+	dentry = mount_subtree(root_mnt, export_path);
 	nfs_referral_loop_unprotect();
-	put_mnt_ns(ns_private);
 
-	if (ret != 0)
-		goto out_err;
-
-	s = path.mnt->mnt_sb;
-	atomic_inc(&s->s_active);
-	dentry = dget(path.dentry);
-
-	path_put(&path);
-	down_write(&s->s_umount);
 	return dentry;
-out_put_mnt_ns:
-	put_mnt_ns(ns_private);
-out_mntput:
-	mntput(root_mnt);
-out_err:
-	return ERR_PTR(ret);
 }
 
 static struct dentry *nfs4_try_mount(int flags, const char *dev_name,
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 2db1bd3..851ba3d 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1652,46 +1652,12 @@
 	return error;
 }
 
-static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry,
-		struct kstat *stat)
-{
-	struct inode *inode = dentry->d_inode;
-	struct task_struct *task = get_proc_task(inode);
-	int rc;
-
-	if (task == NULL)
-		return -ESRCH;
-
-	rc = -EACCES;
-	if (lock_trace(task))
-		goto out_task;
-
-	generic_fillattr(inode, stat);
-	unlock_trace(task);
-	rc = 0;
-out_task:
-	put_task_struct(task);
-	return rc;
-}
-
 static const struct inode_operations proc_pid_link_inode_operations = {
 	.readlink	= proc_pid_readlink,
 	.follow_link	= proc_pid_follow_link,
 	.setattr	= proc_setattr,
 };
 
-static const struct inode_operations proc_fdinfo_link_inode_operations = {
-	.setattr	= proc_setattr,
-	.getattr	= proc_pid_fd_link_getattr,
-};
-
-static const struct inode_operations proc_fd_link_inode_operations = {
-	.readlink	= proc_pid_readlink,
-	.follow_link	= proc_pid_follow_link,
-	.setattr	= proc_setattr,
-	.getattr	= proc_pid_fd_link_getattr,
-};
-
 
 /* building an inode */
 
@@ -1923,61 +1889,49 @@
 
 static int proc_fd_info(struct inode *inode, struct path *path, char *info)
 {
-	struct task_struct *task;
-	struct files_struct *files;
+	struct task_struct *task = get_proc_task(inode);
+	struct files_struct *files = NULL;
 	struct file *file;
 	int fd = proc_fd(inode);
-	int rc;
 
-	task = get_proc_task(inode);
-	if (!task)
-		return -ENOENT;
+	if (task) {
+		files = get_files_struct(task);
+		put_task_struct(task);
+	}
+	if (files) {
+		/*
+		 * We are not taking a ref to the file structure, so we must
+		 * hold ->file_lock.
+		 */
+		spin_lock(&files->file_lock);
+		file = fcheck_files(files, fd);
+		if (file) {
+			unsigned int f_flags;
+			struct fdtable *fdt;
 
-	rc = -EACCES;
-	if (lock_trace(task))
-		goto out_task;
+			fdt = files_fdtable(files);
+			f_flags = file->f_flags & ~O_CLOEXEC;
+			if (FD_ISSET(fd, fdt->close_on_exec))
+				f_flags |= O_CLOEXEC;
 
-	rc = -ENOENT;
-	files = get_files_struct(task);
-	if (files == NULL)
-		goto out_unlock;
-
-	/*
-	 * We are not taking a ref to the file structure, so we must
-	 * hold ->file_lock.
-	 */
-	spin_lock(&files->file_lock);
-	file = fcheck_files(files, fd);
-	if (file) {
-		unsigned int f_flags;
-		struct fdtable *fdt;
-
-		fdt = files_fdtable(files);
-		f_flags = file->f_flags & ~O_CLOEXEC;
-		if (FD_ISSET(fd, fdt->close_on_exec))
-			f_flags |= O_CLOEXEC;
-
-		if (path) {
-			*path = file->f_path;
-			path_get(&file->f_path);
+			if (path) {
+				*path = file->f_path;
+				path_get(&file->f_path);
+			}
+			if (info)
+				snprintf(info, PROC_FDINFO_MAX,
+					 "pos:\t%lli\n"
+					 "flags:\t0%o\n",
+					 (long long) file->f_pos,
+					 f_flags);
+			spin_unlock(&files->file_lock);
+			put_files_struct(files);
+			return 0;
 		}
-		if (info)
-			snprintf(info, PROC_FDINFO_MAX,
-				 "pos:\t%lli\n"
-				 "flags:\t0%o\n",
-				 (long long) file->f_pos,
-				 f_flags);
-		rc = 0;
-	} else
-		rc = -ENOENT;
-	spin_unlock(&files->file_lock);
-	put_files_struct(files);
-
-out_unlock:
-	unlock_trace(task);
-out_task:
-	put_task_struct(task);
-	return rc;
+		spin_unlock(&files->file_lock);
+		put_files_struct(files);
+	}
+	return -ENOENT;
 }
 
 static int proc_fd_link(struct inode *inode, struct path *path)
@@ -2072,7 +2026,7 @@
 	spin_unlock(&files->file_lock);
 	put_files_struct(files);
 
-	inode->i_op = &proc_fd_link_inode_operations;
+	inode->i_op = &proc_pid_link_inode_operations;
 	inode->i_size = 64;
 	ei->op.proc_get_link = proc_fd_link;
 	d_set_d_op(dentry, &tid_fd_dentry_operations);
@@ -2104,12 +2058,7 @@
 	if (fd == ~0U)
 		goto out;
 
-	result = ERR_PTR(-EACCES);
-	if (lock_trace(task))
-		goto out;
-
 	result = instantiate(dir, dentry, task, &fd);
-	unlock_trace(task);
 out:
 	put_task_struct(task);
 out_no_task:
@@ -2129,28 +2078,23 @@
 	retval = -ENOENT;
 	if (!p)
 		goto out_no_task;
-
-	retval = -EACCES;
-	if (lock_trace(p))
-		goto out;
-
 	retval = 0;
 
 	fd = filp->f_pos;
 	switch (fd) {
 		case 0:
 			if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0)
-				goto out_unlock;
+				goto out;
 			filp->f_pos++;
 		case 1:
 			ino = parent_ino(dentry);
 			if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0)
-				goto out_unlock;
+				goto out;
 			filp->f_pos++;
 		default:
 			files = get_files_struct(p);
 			if (!files)
-				goto out_unlock;
+				goto out;
 			rcu_read_lock();
 			for (fd = filp->f_pos-2;
 			     fd < files_fdtable(files)->max_fds;
@@ -2174,9 +2118,6 @@
 			rcu_read_unlock();
 			put_files_struct(files);
 	}
-
-out_unlock:
-	unlock_trace(p);
 out:
 	put_task_struct(p);
 out_no_task:
@@ -2254,7 +2195,6 @@
 	ei->fd = fd;
 	inode->i_mode = S_IFREG | S_IRUSR;
 	inode->i_fop = &proc_fdinfo_file_operations;
-	inode->i_op = &proc_fdinfo_link_inode_operations;
 	d_set_d_op(dentry, &tid_fd_dentry_operations);
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 33b1331..574d4ee 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -189,7 +189,7 @@
 	int		error = 0;
 
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-		error = -EIO;
+		ioend->io_error = -EIO;
 		goto done;
 	}
 	if (ioend->io_error)
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 1a35138..eac97ef 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -656,7 +656,7 @@
 /*
  * This is the ops vector shared by all buf log items.
  */
-static struct xfs_item_ops xfs_buf_item_ops = {
+static const struct xfs_item_ops xfs_buf_item_ops = {
 	.iop_size	= xfs_buf_item_size,
 	.iop_format	= xfs_buf_item_format,
 	.iop_pin	= xfs_buf_item_pin,
diff --git a/fs/xfs/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c
index bb3f71d..0dee0b7 100644
--- a/fs/xfs/xfs_dquot_item.c
+++ b/fs/xfs/xfs_dquot_item.c
@@ -295,7 +295,7 @@
 /*
  * This is the ops vector for dquots
  */
-static struct xfs_item_ops xfs_dquot_item_ops = {
+static const struct xfs_item_ops xfs_dquot_item_ops = {
 	.iop_size	= xfs_qm_dquot_logitem_size,
 	.iop_format	= xfs_qm_dquot_logitem_format,
 	.iop_pin	= xfs_qm_dquot_logitem_pin,
@@ -483,7 +483,7 @@
 {
 }
 
-static struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
 	.iop_size	= xfs_qm_qoff_logitem_size,
 	.iop_format	= xfs_qm_qoff_logitem_format,
 	.iop_pin	= xfs_qm_qoff_logitem_pin,
@@ -498,7 +498,7 @@
 /*
  * This is the ops vector shared by all quotaoff-start log items.
  */
-static struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
+static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
 	.iop_size	= xfs_qm_qoff_logitem_size,
 	.iop_format	= xfs_qm_qoff_logitem_format,
 	.iop_pin	= xfs_qm_qoff_logitem_pin,
diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c
index d22e626..35c2aff 100644
--- a/fs/xfs/xfs_extfree_item.c
+++ b/fs/xfs/xfs_extfree_item.c
@@ -217,7 +217,7 @@
 /*
  * This is the ops vector shared by all efi log items.
  */
-static struct xfs_item_ops xfs_efi_item_ops = {
+static const struct xfs_item_ops xfs_efi_item_ops = {
 	.iop_size	= xfs_efi_item_size,
 	.iop_format	= xfs_efi_item_format,
 	.iop_pin	= xfs_efi_item_pin,
@@ -477,7 +477,7 @@
 /*
  * This is the ops vector shared by all efd log items.
  */
-static struct xfs_item_ops xfs_efd_item_ops = {
+static const struct xfs_item_ops xfs_efd_item_ops = {
 	.iop_size	= xfs_efd_item_size,
 	.iop_format	= xfs_efd_item_format,
 	.iop_pin	= xfs_efd_item_pin,
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index b7cf21b..abaafdb 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -795,7 +795,7 @@
 /*
  * This is the ops vector shared by all buf log items.
  */
-static struct xfs_item_ops xfs_inode_item_ops = {
+static const struct xfs_item_ops xfs_inode_item_ops = {
 	.iop_size	= xfs_inode_item_size,
 	.iop_format	= xfs_inode_item_format,
 	.iop_pin	= xfs_inode_item_pin,
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 2758a62..a14cd89 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -626,7 +626,7 @@
 	struct xfs_mount	*mp,
 	struct xfs_log_item	*item,
 	int			type,
-	struct xfs_item_ops	*ops)
+	const struct xfs_item_ops *ops)
 {
 	item->li_mountp = mp;
 	item->li_ailp = mp->m_ail;
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index 78c9039..3f7bf45 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -137,7 +137,7 @@
 void	xfs_log_item_init(struct xfs_mount	*mp,
 			struct xfs_log_item	*item,
 			int			type,
-			struct xfs_item_ops	*ops);
+			const struct xfs_item_ops *ops);
 
 xfs_lsn_t xfs_log_done(struct xfs_mount *mp,
 		       struct xlog_ticket *ticket,
diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c
index 5cff443..0bbb1a4 100644
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -674,7 +674,8 @@
 	 * disk and we didn't ask it to allocate;
 	 * ESRCH if quotas got turned off suddenly.
 	 */
-	error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp);
+	error = xfs_qm_dqget(ip->i_mount, ip, id, type,
+			     doalloc | XFS_QMOPT_DOWARN, &dqp);
 	if (error)
 		return error;
 
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 603f3eb..3ae713c 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -326,7 +326,7 @@
 						 struct xfs_log_item *);
 							/* buffer item iodone */
 							/* callback func */
-	struct xfs_item_ops		*li_ops;	/* function list */
+	const struct xfs_item_ops	*li_ops;	/* function list */
 
 	/* delayed logging */
 	struct list_head		li_cil;		/* CIL pointers */
@@ -341,7 +341,7 @@
 	{ XFS_LI_IN_AIL,	"IN_AIL" }, \
 	{ XFS_LI_ABORTED,	"ABORTED" }
 
-typedef struct xfs_item_ops {
+struct xfs_item_ops {
 	uint (*iop_size)(xfs_log_item_t *);
 	void (*iop_format)(xfs_log_item_t *, struct xfs_log_iovec *);
 	void (*iop_pin)(xfs_log_item_t *);
@@ -352,7 +352,7 @@
 	void (*iop_push)(xfs_log_item_t *);
 	bool (*iop_pushbuf)(xfs_log_item_t *);
 	void (*iop_committing)(xfs_log_item_t *, xfs_lsn_t);
-} xfs_item_ops_t;
+};
 
 #define IOP_SIZE(ip)		(*(ip)->li_ops->iop_size)(ip)
 #define IOP_FORMAT(ip,vp)	(*(ip)->li_ops->iop_format)(ip, vp)
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 4ecf2a5..ce9268a 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -112,7 +112,7 @@
 	char		*link)
 {
 	xfs_mount_t	*mp = ip->i_mount;
-	int		pathlen;
+	xfs_fsize_t	pathlen;
 	int		error = 0;
 
 	trace_xfs_readlink(ip);
@@ -122,13 +122,19 @@
 
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 
-	ASSERT(S_ISLNK(ip->i_d.di_mode));
-	ASSERT(ip->i_d.di_size <= MAXPATHLEN);
-
 	pathlen = ip->i_d.di_size;
 	if (!pathlen)
 		goto out;
 
+	if (pathlen < 0 || pathlen > MAXPATHLEN) {
+		xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)",
+			 __func__, (unsigned long long) ip->i_ino,
+			 (long long) pathlen);
+		ASSERT(0);
+		return XFS_ERROR(EFSCORRUPTED);
+	}
+
+
 	if (ip->i_df.if_flags & XFS_IFINLINE) {
 		memcpy(link, ip->i_df.if_u1.if_data, pathlen);
 		link[pathlen] = '\0';
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index cf39949..1f9e951 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -990,7 +990,9 @@
 	struct proc_dir_entry *proc_root;  /**< proc directory entry */
 	struct drm_info_node proc_nodes;
 	struct dentry *debugfs_root;
-	struct drm_info_node debugfs_nodes;
+
+	struct list_head debugfs_list;
+	struct mutex debugfs_lock; /* Protects debugfs_list. */
 
 	struct drm_master *master; /* currently active master for this node */
 	struct list_head master_list;
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index d30bedf..ddd46db 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -235,6 +235,8 @@
 #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
 #define DRM_MODE_FB_DIRTY_FLAGS         0x03
 
+#define DRM_MODE_FB_DIRTY_MAX_CLIPS     256
+
 /*
  * Mark a region of a framebuffer as dirty.
  *
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 3d53efd..f81676f 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -4,6 +4,7 @@
 */
 #define radeon_PCI_IDS \
 	{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -55,6 +56,7 @@
 	{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
 	{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
 	{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h
index 874c4d2..1d161cb 100644
--- a/include/drm/exynos_drm.h
+++ b/include/drm/exynos_drm.h
@@ -36,11 +36,13 @@
  *	- this size value would be page-aligned internally.
  * @flags: user request for setting memory type or cache attributes.
  * @handle: returned handle for the object.
+ * @pad: just padding to be 64-bit aligned.
  */
 struct drm_exynos_gem_create {
 	unsigned int size;
 	unsigned int flags;
 	unsigned int handle;
+	unsigned int pad;
 };
 
 /**
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index b65be60..be94be6 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -874,6 +874,10 @@
 
 #define RADEON_CHUNK_ID_RELOCS	0x01
 #define RADEON_CHUNK_ID_IB	0x02
+#define RADEON_CHUNK_ID_FLAGS	0x03
+
+/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */
+#define RADEON_CS_KEEP_TILING_FLAGS 0x01
 
 struct drm_radeon_cs_chunk {
 	uint32_t		chunk_id;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index a3c071c..847994a 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -211,8 +211,8 @@
 extern struct bio_set *bioset_create(unsigned int, unsigned int);
 extern void bioset_free(struct bio_set *);
 
-extern struct bio *bio_alloc(gfp_t, int);
-extern struct bio *bio_kmalloc(gfp_t, int);
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
 extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
 extern void bio_put(struct bio *);
 extern void bio_free(struct bio *, struct bio_set *);
@@ -519,7 +519,11 @@
 #define bioset_integrity_create(a, b)	(0)
 #define bio_integrity_prep(a)		(0)
 #define bio_integrity_enabled(a)	(0)
-#define bio_integrity_clone(a, b, c, d)	(0)
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+				      gfp_t gfp_mask, struct bio_set *bs)
+{
+	return 0;
+}
 #define bioset_integrity_free(a)	do { } while (0)
 #define bio_integrity_free(a, b)	do { } while (0)
 #define bio_integrity_endio(a, b)	do { } while (0)
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index f88eacb..7c05ac2 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -10,6 +10,12 @@
 #include "osdmap.h"
 #include "messenger.h"
 
+/* 
+ * Maximum object name size 
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) 
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
 struct ceph_msg;
 struct ceph_snap_context;
 struct ceph_osd_request;
@@ -75,7 +81,7 @@
 	struct inode *r_inode;         	      /* for use by callbacks */
 	void *r_priv;			      /* ditto */
 
-	char              r_oid[40];          /* object name */
+	char              r_oid[MAX_OBJ_NAME_SIZE];          /* object name */
 	int               r_oid_len;
 	unsigned long     r_stamp;            /* send OR check time */
 
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index afb9458..98ce812 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -41,7 +41,7 @@
 	unsigned long total_time;
 	unsigned long busy_time;
 	unsigned long current_frequency;
-	void *private_date;
+	void *private_data;
 };
 
 /**
diff --git a/include/linux/device.h b/include/linux/device.h
index ffbcf95..3136ede 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -69,7 +69,7 @@
  * @resume:	Called to bring a device on this bus out of sleep mode.
  * @pm:		Power management operations of this bus, callback the specific
  *		device driver's pm-ops.
- * @iommu_ops   IOMMU specific operations for this bus, used to attach IOMMU
+ * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
  *              driver implementations to a bus and allow the driver to do
  *              bus-specific setup
  * @p:		The private data of the driver core, only the driver core can
@@ -682,6 +682,11 @@
 	return !!dev->power.async_suspend;
 }
 
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+	dev->power.ignore_children = enable;
+}
+
 static inline void device_lock(struct device *dev)
 {
 	mutex_lock(&dev->mutex);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0c4df26..e313022 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1886,6 +1886,7 @@
 extern struct dentry *mount_nodev(struct file_system_type *fs_type,
 	int flags, void *data,
 	int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
 void generic_shutdown_super(struct super_block *sb);
 void kill_block_super(struct super_block *sb);
 void kill_anon_super(struct super_block *sb);
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 9de31bc..6d18f35 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -21,8 +21,6 @@
 #define dev_to_part(device)	container_of((device), struct hd_struct, __dev)
 #define disk_to_dev(disk)	(&(disk)->part0.__dev)
 #define part_to_dev(part)	(&((part)->__dev))
-#define alias_name(disk)	((disk)->alias ? (disk)->alias : \
-						 (disk)->disk_name)
 
 extern struct device_type part_type;
 extern struct kobject *block_depr;
@@ -60,7 +58,6 @@
 
 #define DISK_MAX_PARTS			256
 #define DISK_NAME_LEN			32
-#define ALIAS_LEN			256
 
 #include <linux/major.h>
 #include <linux/device.h>
@@ -166,7 +163,6 @@
                                          * disks that can't be partitioned. */
 
 	char disk_name[DISK_NAME_LEN];	/* name of major driver */
-	char *alias;			/* alias name of disk */
 	char *(*devnode)(struct gendisk *gd, mode_t *mode);
 
 	unsigned int events;		/* supported events */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 19644e0..d9d6c86 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -110,11 +110,6 @@
 
 #define hugetlb_change_protection(vma, address, end, newprot)
 
-#ifndef HPAGE_MASK
-#define HPAGE_MASK	PAGE_MASK		/* Keep the compiler happy */
-#define HPAGE_SIZE	PAGE_SIZE
-#endif
-
 #endif /* !CONFIG_HUGETLB_PAGE */
 
 #define HUGETLB_ANON_FILE "anon_hugepage"
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 08a2fee..aad6bd4 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -118,7 +118,6 @@
 static inline
 void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
 {
-	return 0;
 }
 
 static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index a81bf6d..07d103a 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -432,9 +432,6 @@
 /* Internal numbers to terminate lists */
 #define I2C_CLIENT_END		0xfffeU
 
-/* The numbers to use to set I2C bus address */
-#define ANY_I2C_BUS		0xffff
-
 /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
 #define I2C_ADDRS(addr, addrs...) \
 	((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index 80b480c..abf5028 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -98,9 +98,10 @@
 	INET_DIAG_VEGASINFO,
 	INET_DIAG_CONG,
 	INET_DIAG_TOS,
+	INET_DIAG_TCLASS,
 };
 
-#define INET_DIAG_MAX INET_DIAG_TOS
+#define INET_DIAG_MAX INET_DIAG_TCLASS
 
 
 /* INET_DIAG_MEM */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 08ffab0..94b1e35 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -184,7 +184,6 @@
 		[PIDTYPE_SID]  = INIT_PID_LINK(PIDTYPE_SID),		\
 	},								\
 	.thread_group	= LIST_HEAD_INIT(tsk.thread_group),		\
-	.dirties = INIT_PROP_LOCAL_SINGLE(dirties),			\
 	INIT_IDS							\
 	INIT_PERF_EVENTS(tsk)						\
 	INIT_TRACE_IRQFLAGS						\
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index f47fcd3..c3892fc 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -555,7 +555,6 @@
 #define KVM_CAP_PPC_SMT 64
 #define KVM_CAP_PPC_RMA	65
 #define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
 #define KVM_CAP_PPC_PAPR 68
 #define KVM_CAP_S390_GMAP 71
 
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 82b4c88..8bf2cb9 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -243,7 +243,8 @@
 
 
 /*Registers VDD1, VDD2 voltage values definitions */
-#define VDD1_2_NUM_VOLTS				73
+#define VDD1_2_NUM_VOLT_FINE				73
+#define VDD1_2_NUM_VOLT_COARSE				3
 #define VDD1_2_MIN_VOLT					6000
 #define VDD1_2_OFFSET					125
 
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
index fae2950..83a9cae 100644
--- a/include/linux/mfd/wm8994/registers.h
+++ b/include/linux/mfd/wm8994/registers.h
@@ -1963,6 +1963,21 @@
 #define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
 
 /*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
+/*
  * R76 (0x4C) - Charge Pump (1)
  */
 #define WM8994_CP_ENA                           0x8000  /* CP_ENA */
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index ab2c634..92ecf55 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -410,6 +410,9 @@
 extern const struct inode_operations nfs3_file_inode_operations;
 #endif /* CONFIG_NFS_V3 */
 extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
 extern const struct address_space_operations nfs_file_aops;
 extern const struct address_space_operations nfs_dir_aops;
 
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index c74595b..2a7c533 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1192,6 +1192,7 @@
 	const struct dentry_operations *dentry_ops;
 	const struct inode_operations *dir_inode_ops;
 	const struct inode_operations *file_inode_ops;
+	const struct file_operations *file_ops;
 
 	int	(*getroot) (struct nfs_server *, struct nfs_fh *,
 			    struct nfs_fsinfo *);
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index e3d0b38..7ef6872 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -12,7 +12,7 @@
 	unsigned int is_enabled:1;      /* Enable bit is set */
 };
 
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
 
 extern int pci_enable_ats(struct pci_dev *dev, int ps);
 extern void pci_disable_ats(struct pci_dev *dev);
@@ -29,7 +29,7 @@
 	return dev->ats && dev->ats->is_enabled;
 }
 
-#else /* CONFIG_PCI_IOV */
+#else /* CONFIG_PCI_ATS */
 
 static inline int pci_enable_ats(struct pci_dev *dev, int ps)
 {
@@ -50,7 +50,7 @@
 	return 0;
 }
 
-#endif /* CONFIG_PCI_IOV */
+#endif /* CONFIG_PCI_ATS */
 
 #ifdef CONFIG_PCI_PRI
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 337df0d5..7cda65b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -338,7 +338,7 @@
 	struct list_head msi_list;
 #endif
 	struct pci_vpd *vpd;
-#ifdef CONFIG_PCI_IOV
+#ifdef CONFIG_PCI_ATS
 	union {
 		struct pci_sriov *sriov;	/* SR-IOV capability related */
 		struct pci_dev *physfn;	/* the PF this VF is associated with */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3fdf251..172ba70 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2405,6 +2405,8 @@
 
 #define PCI_VENDOR_ID_AZWAVE		0x1a3b
 
+#define PCI_VENDOR_ID_ASMEDIA		0x1b21
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
 
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 3605e94..04c0110 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -121,6 +121,7 @@
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
 #else
 
+struct pinctrl_dev;
 
 /* Sufficiently stupid default function when pinctrl is not in use */
 static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
diff --git a/include/linux/pm.h b/include/linux/pm.h
index f15acb6..5c4c8b1 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -447,6 +447,7 @@
 	unsigned int		async_suspend:1;
 	bool			is_prepared:1;	/* Owned by the PM core */
 	bool			is_suspended:1;	/* Ditto */
+	bool			ignore_children:1;
 	spinlock_t		lock;
 #ifdef CONFIG_PM_SLEEP
 	struct list_head	entry;
@@ -464,7 +465,6 @@
 	atomic_t		usage_count;
 	atomic_t		child_count;
 	unsigned int		disable_depth:3;
-	unsigned int		ignore_children:1;
 	unsigned int		idle_notification:1;
 	unsigned int		request_pending:1;
 	unsigned int		deferred_resume:1;
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index d8d9036..d3085e7 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -52,11 +52,6 @@
 		|| !atomic_read(&dev->power.child_count);
 }
 
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
-	dev->power.ignore_children = enable;
-}
-
 static inline void pm_runtime_get_noresume(struct device *dev)
 {
 	atomic_inc(&dev->power.usage_count);
@@ -130,7 +125,6 @@
 static inline void pm_runtime_forbid(struct device *dev) {}
 
 static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
 static inline void pm_runtime_get_noresume(struct device *dev) {}
 static inline void pm_runtime_put_noidle(struct device *dev) {}
 static inline bool device_run_wake(struct device *dev) { return false; }
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 68daf4f..1c4f3e9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1521,7 +1521,6 @@
 #ifdef CONFIG_FAULT_INJECTION
 	int make_it_fail;
 #endif
-	struct prop_local_single dirties;
 	/*
 	 * when (nr_dirtied >= nr_dirtied_pause), it's time to call
 	 * balance_dirty_pages() for some dirty throttling pause
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 97ff8e2..3d86517 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -207,13 +207,15 @@
 
 struct serial_rs485 {
 	__u32	flags;			/* RS485 feature flags */
-#define SER_RS485_ENABLED		(1 << 0)
-#define SER_RS485_RTS_ON_SEND		(1 << 1)
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)
-#define SER_RS485_RTS_BEFORE_SEND	(1 << 3)
+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
+							   RTS pin when
+							   sending */
+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
+							   RTS pin after sent*/
 #define SER_RS485_RX_DURING_TX		(1 << 4)
-	__u32	delay_rts_before_send;	/* Milliseconds */
-	__u32	delay_rts_after_send;	/* Milliseconds */
+	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
+	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
 	__u32	padding[5];		/* Memory is cheap, new structs
 					   are a royal PITA .. */
 };
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 0efa1f1..369273a 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -67,6 +67,7 @@
 	SCIx_IRDA_REGTYPE,
 	SCIx_SCIFA_REGTYPE,
 	SCIx_SCIFB_REGTYPE,
+	SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH3_SCIF_REGTYPE,
 	SCIx_SH4_SCIF_REGTYPE,
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 3ccf186..a20831c 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -52,7 +52,6 @@
 
 	unsigned long		arch_flags;
 	void			*priv;
-	struct dentry		*dentry;
 	struct clk_mapping	*mapping;
 	struct cpufreq_frequency_table *freq_table;
 	unsigned int		nr_freqs;
@@ -94,6 +93,9 @@
 long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
 			      unsigned int div_max, unsigned long rate);
 
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+			       unsigned int mult_max, unsigned long rate);
+
 long clk_round_parent(struct clk *clk, unsigned long target,
 		      unsigned long *best_freq, unsigned long *parent_freq,
 		      unsigned int div_min, unsigned int div_max);
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index bc8c920..8446789 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -104,4 +104,80 @@
 int register_pinmux(struct pinmux_info *pip);
 int unregister_pinmux(struct pinmux_info *pip);
 
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+	PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx),	\
+	PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx),	\
+	PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx),	\
+	PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+	PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx),	\
+	PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx),	\
+	PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx),	\
+	PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx),	\
+	PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str)	CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL()	CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,			\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)		\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,		\
+	0, 0, 0, 0,			\
+	0, 0, (in_pd), 0,		\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)							\
+	{								\
+		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+			_PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+			      PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,		\
+				PORT##nr##_FN2, PORT##nr##_FN3,		\
+				PORT##nr##_FN4, PORT##nr##_FN5,		\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
 #endif /* __SH_PFC_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index add4790..e9e72bd 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -85,6 +85,8 @@
  * @reset: reset the device
  *	vdev: the virtio device
  *	After this, status and feature negotiation must be done again
+ *	Device must not be reset from its vq/config callbacks, or in
+ *	parallel with being added/removed.
  * @find_vqs: find virtqueues and instantiate them.
  *	vdev: the virtio_device
  *	nvqs: the number of virtqueues to find
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
index 27c7ede..5c7b6f0 100644
--- a/include/linux/virtio_mmio.h
+++ b/include/linux/virtio_mmio.h
@@ -63,7 +63,7 @@
 #define VIRTIO_MMIO_GUEST_FEATURES	0x020
 
 /* Activated features set selector - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES_SET	0x024
+#define VIRTIO_MMIO_GUEST_FEATURES_SEL	0x024
 
 /* Guest's memory page size in bytes - Write Only */
 #define VIRTIO_MMIO_GUEST_PAGE_SIZE	0x028
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 687fb11..4bde182 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -119,7 +119,7 @@
 #endif
 
 /* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size);
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
 extern void free_vm_area(struct vm_struct *area);
 
 /* for /dev/kmem */
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index ab90ae0..6cc18f3 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -39,8 +39,11 @@
 #define L2CAP_DEFAULT_ACK_TO		200
 #define L2CAP_LE_DEFAULT_MTU		23
 
-#define L2CAP_CONN_TIMEOUT	(40000) /* 40 seconds */
-#define L2CAP_INFO_TIMEOUT	(4000)  /*  4 seconds */
+#define L2CAP_DISC_TIMEOUT             (100)
+#define L2CAP_DISC_REJ_TIMEOUT         (5000)  /*  5 seconds */
+#define L2CAP_ENC_TIMEOUT              (5000)  /*  5 seconds */
+#define L2CAP_CONN_TIMEOUT             (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT             (4000)  /*  4 seconds */
 
 /* L2CAP socket address */
 struct sockaddr_l2 {
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 92cf1c2..95852e3 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -456,6 +456,9 @@
  *	as the AC bitmap in the QoS info field
  * @max_sp: max Service Period. same format as the MAX_SP in the
  *	QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ *	(for those that don't have a natural "no change" value),
+ *	see &enum station_parameters_apply_mask
  */
 struct station_parameters {
 	u8 *supported_rates;
@@ -615,6 +618,7 @@
  *	user space MLME/SME implementation. The information is provided for
  *	the cfg80211_new_sta() calls to notify user space of the IEs.
  * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
  */
 struct station_info {
 	u32 filled;
diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h
index a785a3b..438c256 100644
--- a/include/xen/platform_pci.h
+++ b/include/xen/platform_pci.h
@@ -29,8 +29,7 @@
 static inline int xen_must_unplug_nics(void) {
 #if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
 		defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
-		(defined(CONFIG_XEN_PLATFORM_PCI) || \
-		 defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+		defined(CONFIG_XEN_PVHVM)
         return 1;
 #else
         return 0;
@@ -40,8 +39,7 @@
 static inline int xen_must_unplug_disks(void) {
 #if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
 		defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
-		(defined(CONFIG_XEN_PLATFORM_PCI) || \
-		 defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+		defined(CONFIG_XEN_PVHVM)
         return 1;
 #else
         return 0;
diff --git a/kernel/fork.c b/kernel/fork.c
index ba0d172..da4a6a1 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -162,7 +162,6 @@
 
 void free_task(struct task_struct *tsk)
 {
-	prop_local_destroy_single(&tsk->dirties);
 	account_kernel_stack(tsk->stack, -1);
 	free_thread_info(tsk->stack);
 	rt_mutex_debug_task_free(tsk);
@@ -274,10 +273,6 @@
 
 	tsk->stack = ti;
 
-	err = prop_local_init_single(&tsk->dirties);
-	if (err)
-		goto out;
-
 	setup_thread_stack(tsk, orig);
 	clear_user_return_notifier(tsk);
 	clear_tsk_need_resched(tsk);
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index aa57d5d..b5f4742 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -115,7 +115,7 @@
 	struct irq_desc *desc;
 	int i, ok = 0;
 
-	if (atomic_inc_return(&irq_poll_active) == 1)
+	if (atomic_inc_return(&irq_poll_active) != 1)
 		goto out;
 
 	irq_poll_cpu = smp_processor_id();
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index b4511b6..196c0126 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -55,6 +55,8 @@
 
 static int hibernation_mode = HIBERNATION_SHUTDOWN;
 
+static bool freezer_test_done;
+
 static const struct platform_hibernation_ops *hibernation_ops;
 
 /**
@@ -347,6 +349,17 @@
 	if (error)
 		goto Close;
 
+	if (hibernation_test(TEST_FREEZER) ||
+		hibernation_testmode(HIBERNATION_TESTPROC)) {
+
+		/*
+		 * Indicate to the caller that we are returning due to a
+		 * successful freezer test.
+		 */
+		freezer_test_done = true;
+		goto Close;
+	}
+
 	error = dpm_prepare(PMSG_FREEZE);
 	if (error)
 		goto Complete_devices;
@@ -641,15 +654,13 @@
 	if (error)
 		goto Finish;
 
-	if (hibernation_test(TEST_FREEZER))
-		goto Thaw;
-
-	if (hibernation_testmode(HIBERNATION_TESTPROC))
-		goto Thaw;
-
 	error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
 	if (error)
 		goto Thaw;
+	if (freezer_test_done) {
+		freezer_test_done = false;
+		goto Thaw;
+	}
 
 	if (in_suspend) {
 		unsigned int flags = 0;
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 71f49fe..36e0f09 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -290,13 +290,14 @@
 		if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
 			break;
 	}
-	if (state < PM_SUSPEND_MAX && *s)
+	if (state < PM_SUSPEND_MAX && *s) {
 		error = enter_state(state);
 		if (error) {
 			suspend_stats.fail++;
 			dpm_save_failed_errno(error);
 		} else
 			suspend_stats.success++;
+	}
 #endif
 
  Exit:
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 56db751..995e3bd 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -70,6 +70,7 @@
 };
 static struct pm_qos_object cpu_dma_pm_qos = {
 	.constraints = &cpu_dma_constraints,
+	.name = "cpu_dma_latency",
 };
 
 static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index a086064..71034f4 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -724,6 +724,14 @@
 
 	bdi_unregister(bdi);
 
+	/*
+	 * If bdi_unregister() had already been called earlier, the
+	 * wakeup_timer could still be armed because bdi_prune_sb()
+	 * can race with the bdi_wakeup_thread_delayed() calls from
+	 * __mark_inode_dirty().
+	 */
+	del_timer_sync(&bdi->wb.wakeup_timer);
+
 	for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
 		percpu_counter_destroy(&bdi->bdi_stat[i]);
 
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index dae27ba..bb28a5f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2422,6 +2422,8 @@
 	 * anon_vma prepared.
 	 */
 	if (unlikely(anon_vma_prepare(vma))) {
+		page_cache_release(new_page);
+		page_cache_release(old_page);
 		/* Caller expects lock to be held */
 		spin_lock(&mm->page_table_lock);
 		return VM_FAULT_OOM;
diff --git a/mm/nommu.c b/mm/nommu.c
index 73419c5..b982290 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -454,7 +454,7 @@
  *	between processes, it syncs the pagetable across all
  *	processes.
  */
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
 {
 	BUG();
 	return NULL;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 471dedb..76f2c5a 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -185,6 +185,11 @@
 	if (!p)
 		return 0;
 
+	if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+		task_unlock(p);
+		return 0;
+	}
+
 	/*
 	 * The memory controller may have a limit of 0 bytes, so avoid a divide
 	 * by zero, if necessary.
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index a3278f0..7125248 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -128,7 +128,6 @@
  *
  */
 static struct prop_descriptor vm_completions;
-static struct prop_descriptor vm_dirties;
 
 /*
  * couple the period to the dirty_ratio:
@@ -154,7 +153,6 @@
 {
 	int shift = calc_period_shift();
 	prop_change_shift(&vm_completions, shift);
-	prop_change_shift(&vm_dirties, shift);
 
 	writeback_set_ratelimit();
 }
@@ -235,11 +233,6 @@
 }
 EXPORT_SYMBOL_GPL(bdi_writeout_inc);
 
-void task_dirty_inc(struct task_struct *tsk)
-{
-	prop_inc_single(&vm_dirties, &tsk->dirties);
-}
-
 /*
  * Obtain an accurate fraction of the BDI's portion.
  */
@@ -1133,17 +1126,17 @@
 					  pages_dirtied,
 					  pause,
 					  start_time);
-		__set_current_state(TASK_UNINTERRUPTIBLE);
+		__set_current_state(TASK_KILLABLE);
 		io_schedule_timeout(pause);
 
-		dirty_thresh = hard_dirty_limit(dirty_thresh);
 		/*
-		 * max-pause area. If dirty exceeded but still within this
-		 * area, no need to sleep for more than 200ms: (a) 8 pages per
-		 * 200ms is typically more than enough to curb heavy dirtiers;
-		 * (b) the pause time limit makes the dirtiers more responsive.
+		 * This is typically equal to (nr_dirty < dirty_thresh) and can
+		 * also keep "1000+ dd on a slow USB stick" under control.
 		 */
-		if (nr_dirty < dirty_thresh)
+		if (task_ratelimit)
+			break;
+
+		if (fatal_signal_pending(current))
 			break;
 	}
 
@@ -1395,7 +1388,6 @@
 
 	shift = calc_period_shift();
 	prop_descriptor_init(&vm_completions, shift);
-	prop_descriptor_init(&vm_dirties, shift);
 }
 
 /**
@@ -1724,7 +1716,6 @@
 		__inc_zone_page_state(page, NR_DIRTIED);
 		__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
 		__inc_bdi_stat(mapping->backing_dev_info, BDI_DIRTIED);
-		task_dirty_inc(current);
 		task_io_account_write(PAGE_CACHE_SIZE);
 	}
 }
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index b669aa6..3231bf3 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2141,23 +2141,30 @@
 
 static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
 {
-	/* apply_to_page_range() does all the hard work. */
+	pte_t ***p = data;
+
+	if (p) {
+		*(*p) = pte;
+		(*p)++;
+	}
 	return 0;
 }
 
 /**
  *	alloc_vm_area - allocate a range of kernel address space
  *	@size:		size of the area
+ *	@ptes:		returns the PTEs for the address space
  *
  *	Returns:	NULL on failure, vm_struct on success
  *
  *	This function reserves a range of kernel address space, and
  *	allocates pagetables to map that range.  No actual mappings
- *	are created.  If the kernel address space is not shared
- *	between processes, it syncs the pagetable across all
- *	processes.
+ *	are created.
+ *
+ *	If @ptes is non-NULL, pointers to the PTEs (in init_mm)
+ *	allocated for the VM area are returned.
  */
-struct vm_struct *alloc_vm_area(size_t size)
+struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes)
 {
 	struct vm_struct *area;
 
@@ -2171,19 +2178,11 @@
 	 * of kernel virtual address space and mapped into init_mm.
 	 */
 	if (apply_to_page_range(&init_mm, (unsigned long)area->addr,
-				area->size, f, NULL)) {
+				size, f, ptes ? &ptes : NULL)) {
 		free_vm_area(area);
 		return NULL;
 	}
 
-	/*
-	 * If the allocated address space is passed to a hypercall
-	 * before being used then we cannot rely on a page fault to
-	 * trigger an update of the page tables.  So sync all the page
-	 * tables here.
-	 */
-	vmalloc_sync_all();
-
 	return area;
 }
 EXPORT_SYMBOL_GPL(alloc_vm_area);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index c1c597e..e0af723 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -673,7 +673,7 @@
 		goto encrypt;
 
 auth:
-	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+	if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
 		return 0;
 
 	if (!hci_conn_auth(conn, sec_level, auth_type))
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 8cd1291..5ea94a1 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -251,7 +251,7 @@
 
 	if (sock_owned_by_user(sk)) {
 		/* sk is owned by user. Try again later */
-		__set_chan_timer(chan, HZ / 5);
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 		bh_unlock_sock(sk);
 		chan_put(chan);
 		return;
@@ -2488,7 +2488,7 @@
 		if (sock_owned_by_user(sk)) {
 			l2cap_state_change(chan, BT_DISCONN);
 			__clear_chan_timer(chan);
-			__set_chan_timer(chan, HZ / 5);
+			__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 			break;
 		}
 
@@ -2661,7 +2661,7 @@
 
 	default:
 		sk->sk_err = ECONNRESET;
-		__set_chan_timer(chan, HZ * 5);
+		__set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
 		l2cap_send_disconn_req(conn, chan, ECONNRESET);
 		goto done;
 	}
@@ -2718,7 +2718,7 @@
 	if (sock_owned_by_user(sk)) {
 		l2cap_state_change(chan, BT_DISCONN);
 		__clear_chan_timer(chan);
-		__set_chan_timer(chan, HZ / 5);
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 		bh_unlock_sock(sk);
 		return 0;
 	}
@@ -2752,7 +2752,7 @@
 	if (sock_owned_by_user(sk)) {
 		l2cap_state_change(chan,BT_DISCONN);
 		__clear_chan_timer(chan);
-		__set_chan_timer(chan, HZ / 5);
+		__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 		bh_unlock_sock(sk);
 		return 0;
 	}
@@ -3998,7 +3998,7 @@
 	if (encrypt == 0x00) {
 		if (chan->sec_level == BT_SECURITY_MEDIUM) {
 			__clear_chan_timer(chan);
-			__set_chan_timer(chan, HZ * 5);
+			__set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
 		} else if (chan->sec_level == BT_SECURITY_HIGH)
 			l2cap_chan_close(chan, ECONNREFUSED);
 	} else {
@@ -4066,7 +4066,7 @@
 					L2CAP_CONN_REQ, sizeof(req), &req);
 			} else {
 				__clear_chan_timer(chan);
-				__set_chan_timer(chan, HZ / 10);
+				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 			}
 		} else if (chan->state == BT_CONNECT2) {
 			struct l2cap_conn_rsp rsp;
@@ -4086,7 +4086,7 @@
 				}
 			} else {
 				l2cap_state_change(chan, BT_DISCONN);
-				__set_chan_timer(chan, HZ / 10);
+				__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
 				res = L2CAP_CR_SEC_BLOCK;
 				stat = L2CAP_CS_NO_INFO;
 			}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 995cbe0..a5f4e57 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1501,6 +1501,8 @@
 
 	__skb_pull(skb2, offset);
 	skb_reset_transport_header(skb2);
+	skb_postpull_rcsum(skb2, skb_network_header(skb2),
+			   skb_network_header_len(skb2));
 
 	icmp6_type = icmp6_hdr(skb2)->icmp6_type;
 
@@ -1770,7 +1772,7 @@
 	int err = 0;
 	struct net_bridge_mdb_htable *mdb;
 
-	spin_lock(&br->multicast_lock);
+	spin_lock_bh(&br->multicast_lock);
 	if (br->multicast_disabled == !val)
 		goto unlock;
 
@@ -1806,7 +1808,7 @@
 	}
 
 unlock:
-	spin_unlock(&br->multicast_lock);
+	spin_unlock_bh(&br->multicast_lock);
 
 	return err;
 }
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 733e4600..f4f3f58 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -244,7 +244,7 @@
 		ceph_pagelist_init(req->r_trail);
 	}
 	/* create request message; allow space for oid */
-	msg_size += 40;
+	msg_size += MAX_OBJ_NAME_SIZE;
 	if (snapc)
 		msg_size += sizeof(u64) * snapc->num_snaps;
 	if (use_mempool)
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index c1f4154..36d1440 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -136,8 +136,6 @@
 		memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
 	}
 
-	err = ah->nexthdr;
-
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_output_resume(skb, err);
 }
@@ -264,12 +262,12 @@
 	if (err)
 		goto out;
 
+	err = ah->nexthdr;
+
 	skb->network_header += ah_hlen;
 	memcpy(skb_network_header(skb), work_iph, ihl);
 	__skb_pull(skb, ah_hlen + ihl);
 	skb_set_transport_header(skb, -ihl);
-
-	err = ah->nexthdr;
 out:
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_input_resume(skb, err);
@@ -371,8 +369,6 @@
 		if (err == -EINPROGRESS)
 			goto out;
 
-		if (err == -EBUSY)
-			err = NET_XMIT_DROP;
 		goto out_free;
 	}
 
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index f5e2bda..68e8ac5 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -133,8 +133,8 @@
 			       &np->rcv_saddr);
 		ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst,
 			       &np->daddr);
-		if (ext & (1 << (INET_DIAG_TOS - 1)))
-			RTA_PUT_U8(skb, INET_DIAG_TOS, np->tclass);
+		if (ext & (1 << (INET_DIAG_TCLASS - 1)))
+			RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass);
 	}
 #endif
 
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index ec93335..05d20cc 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -640,6 +640,7 @@
 	}
 	if (srrptr <= srrspace) {
 		opt->srr_is_hit = 1;
+		iph->daddr = nexthop;
 		opt->is_changed = 1;
 	}
 	return 0;
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index a06f73f..43d4c3b 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -339,7 +339,6 @@
 	sk = ping_v4_lookup(net, iph->daddr, iph->saddr,
 			    ntohs(icmph->un.echo.id), skb->dev->ifindex);
 	if (sk == NULL) {
-		ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
 		pr_debug("no socket, dropping\n");
 		return;	/* No socket for error */
 	}
@@ -679,7 +678,6 @@
 	pr_debug("ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\n",
 		inet_sk(sk), inet_sk(sk)->inet_num, skb);
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		ICMP_INC_STATS_BH(sock_net(sk), ICMP_MIB_INERRORS);
 		kfree_skb(skb);
 		pr_debug("ping_queue_rcv_skb -> failed\n");
 		return -1;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 155138d..0c74da8 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1304,16 +1304,42 @@
 	spin_unlock_bh(rt_hash_lock_addr(hash));
 }
 
+static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
+{
+	struct rtable *rt = (struct rtable *) dst;
+	__be32 orig_gw = rt->rt_gateway;
+	struct neighbour *n, *old_n;
+
+	dst_confirm(&rt->dst);
+
+	rt->rt_gateway = peer->redirect_learned.a4;
+
+	n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
+	if (IS_ERR(n))
+		return PTR_ERR(n);
+	old_n = xchg(&rt->dst._neighbour, n);
+	if (old_n)
+		neigh_release(old_n);
+	if (!n || !(n->nud_state & NUD_VALID)) {
+		if (n)
+			neigh_event_send(n, NULL);
+		rt->rt_gateway = orig_gw;
+		return -EAGAIN;
+	} else {
+		rt->rt_flags |= RTCF_REDIRECTED;
+		call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
+	}
+	return 0;
+}
+
 /* called in rcu_read_lock() section */
 void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw,
 		    __be32 saddr, struct net_device *dev)
 {
 	int s, i;
 	struct in_device *in_dev = __in_dev_get_rcu(dev);
-	struct rtable *rt;
 	__be32 skeys[2] = { saddr, 0 };
 	int    ikeys[2] = { dev->ifindex, 0 };
-	struct flowi4 fl4;
 	struct inet_peer *peer;
 	struct net *net;
 
@@ -1336,33 +1362,42 @@
 			goto reject_redirect;
 	}
 
-	memset(&fl4, 0, sizeof(fl4));
-	fl4.daddr = daddr;
 	for (s = 0; s < 2; s++) {
 		for (i = 0; i < 2; i++) {
-			fl4.flowi4_oif = ikeys[i];
-			fl4.saddr = skeys[s];
-			rt = __ip_route_output_key(net, &fl4);
-			if (IS_ERR(rt))
-				continue;
+			unsigned int hash;
+			struct rtable __rcu **rthp;
+			struct rtable *rt;
 
-			if (rt->dst.error || rt->dst.dev != dev ||
-			    rt->rt_gateway != old_gw) {
-				ip_rt_put(rt);
-				continue;
+			hash = rt_hash(daddr, skeys[s], ikeys[i], rt_genid(net));
+
+			rthp = &rt_hash_table[hash].chain;
+
+			while ((rt = rcu_dereference(*rthp)) != NULL) {
+				rthp = &rt->dst.rt_next;
+
+				if (rt->rt_key_dst != daddr ||
+				    rt->rt_key_src != skeys[s] ||
+				    rt->rt_oif != ikeys[i] ||
+				    rt_is_input_route(rt) ||
+				    rt_is_expired(rt) ||
+				    !net_eq(dev_net(rt->dst.dev), net) ||
+				    rt->dst.error ||
+				    rt->dst.dev != dev ||
+				    rt->rt_gateway != old_gw)
+					continue;
+
+				if (!rt->peer)
+					rt_bind_peer(rt, rt->rt_dst, 1);
+
+				peer = rt->peer;
+				if (peer) {
+					if (peer->redirect_learned.a4 != new_gw) {
+						peer->redirect_learned.a4 = new_gw;
+						atomic_inc(&__rt_peer_genid);
+					}
+					check_peer_redir(&rt->dst, peer);
+				}
 			}
-
-			if (!rt->peer)
-				rt_bind_peer(rt, rt->rt_dst, 1);
-
-			peer = rt->peer;
-			if (peer) {
-				peer->redirect_learned.a4 = new_gw;
-				atomic_inc(&__rt_peer_genid);
-			}
-
-			ip_rt_put(rt);
-			return;
 		}
 	}
 	return;
@@ -1649,33 +1684,6 @@
 	}
 }
 
-static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
-{
-	struct rtable *rt = (struct rtable *) dst;
-	__be32 orig_gw = rt->rt_gateway;
-	struct neighbour *n, *old_n;
-
-	dst_confirm(&rt->dst);
-
-	rt->rt_gateway = peer->redirect_learned.a4;
-
-	n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
-	if (IS_ERR(n))
-		return PTR_ERR(n);
-	old_n = xchg(&rt->dst._neighbour, n);
-	if (old_n)
-		neigh_release(old_n);
-	if (!n || !(n->nud_state & NUD_VALID)) {
-		if (n)
-			neigh_event_send(n, NULL);
-		rt->rt_gateway = orig_gw;
-		return -EAGAIN;
-	} else {
-		rt->rt_flags |= RTCF_REDIRECTED;
-		call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n);
-	}
-	return 0;
-}
 
 static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
 {
@@ -2845,7 +2853,7 @@
 	struct rtable *rt = skb_rtable(skb);
 	struct rtmsg *r;
 	struct nlmsghdr *nlh;
-	long expires = 0;
+	unsigned long expires = 0;
 	const struct inet_peer *peer = rt->peer;
 	u32 id = 0, ts = 0, tsage = 0, error;
 
@@ -2902,8 +2910,12 @@
 			tsage = get_seconds() - peer->tcp_ts_stamp;
 		}
 		expires = ACCESS_ONCE(peer->pmtu_expires);
-		if (expires)
-			expires -= jiffies;
+		if (expires) {
+			if (time_before(jiffies, expires))
+				expires -= jiffies;
+			else
+				expires = 0;
+		}
 	}
 
 	if (rt_is_input_route(rt)) {
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a744315..a9db4b1 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1510,6 +1510,7 @@
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
 	return NULL;
 put_and_exit:
+	tcp_clear_xmit_timers(newsk);
 	bh_unlock_sock(newsk);
 	sock_put(newsk);
 	goto exit;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 980b98f..63170e29 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1382,7 +1382,7 @@
 /* Return 0, if packet can be sent now without violation Nagle's rules:
  * 1. It is full sized.
  * 2. Or it contains FIN. (already checked by caller)
- * 3. Or TCP_NODELAY was set.
+ * 3. Or TCP_CORK is not set, and TCP_NODELAY is set.
  * 4. Or TCP_CORK is not set, and all sent packets are ACKed.
  *    With Minshall's modification: all sent small packets are ACKed.
  */
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index 2195ae6..4c0f894 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -324,8 +324,6 @@
 #endif
 	}
 
-	err = ah->nexthdr;
-
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_output_resume(skb, err);
 }
@@ -466,12 +464,12 @@
 	if (err)
 		goto out;
 
+	err = ah->nexthdr;
+
 	skb->network_header += ah_hlen;
 	memcpy(skb_network_header(skb), work_iph, hdr_len);
 	__skb_pull(skb, ah_hlen + hdr_len);
 	skb_set_transport_header(skb, -hdr_len);
-
-	err = ah->nexthdr;
 out:
 	kfree(AH_SKB_CB(skb)->tmp);
 	xfrm_input_resume(skb, err);
@@ -583,8 +581,6 @@
 		if (err == -EINPROGRESS)
 			goto out;
 
-		if (err == -EBUSY)
-			err = NET_XMIT_DROP;
 		goto out_free;
 	}
 
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 027c7ff..a46c64e 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -111,6 +111,14 @@
 	    ipv6_addr_loopback(&hdr->daddr))
 		goto err;
 
+	/*
+	 * RFC4291 2.7
+	 * Multicast addresses must not be used as source addresses in IPv6
+	 * packets or appear in any Routing header.
+	 */
+	if (ipv6_addr_is_multicast(&hdr->saddr))
+		goto err;
+
 	skb->transport_header = skb->network_header + sizeof(*hdr);
 	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
 
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index bdc15c9..4e2e9ff 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -289,6 +289,8 @@
 	if ((err = register_netdevice(dev)) < 0)
 		goto failed_free;
 
+	strcpy(t->parms.name, dev->name);
+
 	dev_hold(dev);
 	ip6_tnl_link(ip6n, t);
 	return t;
@@ -1407,7 +1409,6 @@
 	struct ip6_tnl *t = netdev_priv(dev);
 
 	t->dev = dev;
-	strcpy(t->parms.name, dev->name);
 	dev->tstats = alloc_percpu(struct pcpu_tstats);
 	if (!dev->tstats)
 		return -ENOMEM;
@@ -1487,6 +1488,7 @@
 static int __net_init ip6_tnl_init_net(struct net *net)
 {
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+	struct ip6_tnl *t = NULL;
 	int err;
 
 	ip6n->tnls[0] = ip6n->tnls_wc;
@@ -1507,6 +1509,10 @@
 	err = register_netdev(ip6n->fb_tnl_dev);
 	if (err < 0)
 		goto err_register;
+
+	t = netdev_priv(ip6n->fb_tnl_dev);
+
+	strcpy(t->parms.name, ip6n->fb_tnl_dev->name);
 	return 0;
 
 err_register:
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index bf8d50c..cf0f308 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -756,9 +756,6 @@
 		goto error;
 	}
 
-	/* Point to L2TP header */
-	optr = ptr = skb->data;
-
 	/* Trace packet contents, if enabled */
 	if (tunnel->debug & L2TP_MSG_DATA) {
 		length = min(32u, skb->len);
@@ -769,12 +766,15 @@
 
 		offset = 0;
 		do {
-			printk(" %02X", ptr[offset]);
+			printk(" %02X", skb->data[offset]);
 		} while (++offset < length);
 
 		printk("\n");
 	}
 
+	/* Point to L2TP header */
+	optr = ptr = skb->data;
+
 	/* Get L2TP header flags */
 	hdrflags = ntohs(*(__be16 *) ptr);
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 72c8bea..b1b1bb3 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1487,6 +1487,7 @@
 	int i, j, err;
 	bool have_higher_than_11mbit = false;
 	u16 ap_ht_cap_flags;
+	int min_rate = INT_MAX, min_rate_index = -1;
 
 	/* AssocResp and ReassocResp have identical structure */
 
@@ -1553,6 +1554,10 @@
 				rates |= BIT(j);
 				if (is_basic)
 					basic_rates |= BIT(j);
+				if (rate < min_rate) {
+					min_rate = rate;
+					min_rate_index = j;
+				}
 				break;
 			}
 		}
@@ -1570,11 +1575,25 @@
 				rates |= BIT(j);
 				if (is_basic)
 					basic_rates |= BIT(j);
+				if (rate < min_rate) {
+					min_rate = rate;
+					min_rate_index = j;
+				}
 				break;
 			}
 		}
 	}
 
+	/*
+	 * some buggy APs don't advertise basic_rates. use the lowest
+	 * supported rate instead.
+	 */
+	if (unlikely(!basic_rates) && min_rate_index >= 0) {
+		printk(KERN_DEBUG "%s: No basic rates in AssocResp. "
+		       "Using min supported rate instead.\n", sdata->name);
+		basic_rates = BIT(min_rate_index);
+	}
+
 	sta->sta.supp_rates[wk->chan->band] = rates;
 	sdata->vif.bss_conf.basic_rates = basic_rates;
 
@@ -2269,6 +2288,7 @@
 
 	cancel_work_sync(&ifmgd->request_smps_work);
 
+	cancel_work_sync(&ifmgd->monitor_work);
 	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
@@ -2277,7 +2297,6 @@
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->monitor_work);
 	/* these will just be re-established on connection */
 	del_timer_sync(&ifmgd->conn_mon_timer);
 	del_timer_sync(&ifmgd->bcn_mon_timer);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index bb53726..fb123e2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -141,8 +141,9 @@
 	pos++;
 
 	/* IEEE80211_RADIOTAP_RATE */
-	if (status->flag & RX_FLAG_HT) {
+	if (!rate || status->flag & RX_FLAG_HT) {
 		/*
+		 * Without rate information don't add it. If we have,
 		 * MCS information is a separate field in radiotap,
 		 * added below. The byte here is needed as padding
 		 * for the channel though, so initialise it to 0.
@@ -163,12 +164,14 @@
 	else if (status->flag & RX_FLAG_HT)
 		put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else if (rate->flags & IEEE80211_RATE_ERP_G)
+	else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
 		put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else
+	else if (rate)
 		put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
 				   pos);
+	else
+		put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
 	pos += 2;
 
 	/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index ce962d2..8eaa746 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1354,12 +1354,12 @@
 			 * Use MoreData flag to indicate whether there are
 			 * more buffered frames for this STA
 			 */
-			if (!more_data)
-				hdr->frame_control &=
-					cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
-			else
+			if (more_data || !skb_queue_empty(&frames))
 				hdr->frame_control |=
 					cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+			else
+				hdr->frame_control &=
+					cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
 
 			if (ieee80211_is_data_qos(hdr->frame_control) ||
 			    ieee80211_is_qos_nullfunc(hdr->frame_control))
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 51e256c..eca0fad 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -881,6 +881,8 @@
 	skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
 				     ssid, ssid_len,
 				     buf, buf_len);
+	if (!skb)
+		goto out;
 
 	if (dst) {
 		mgmt = (struct ieee80211_mgmt *) skb->data;
@@ -889,6 +891,8 @@
 	}
 
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
 	kfree(buf);
 
 	return skb;
diff --git a/net/rds/Kconfig b/net/rds/Kconfig
index 4cf6dc7..ec753b3 100644
--- a/net/rds/Kconfig
+++ b/net/rds/Kconfig
@@ -9,7 +9,6 @@
 
 config RDS_RDMA
 	tristate "RDS over Infiniband and iWARP"
-	select LLIST
 	depends on RDS && INFINIBAND && INFINIBAND_ADDR_TRANS
 	---help---
 	  Allow RDS to use Infiniband and iWARP as a transport.
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d7f97ef..2d78d95 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -2530,8 +2530,10 @@
 		int err;
 		err = xs_init_anyaddr(args->dstaddr->sa_family,
 					(struct sockaddr *)&new->srcaddr);
-		if (err != 0)
+		if (err != 0) {
+			xprt_free(xprt);
 			return ERR_PTR(err);
+		}
 	}
 
 	return xprt;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 48260c2..b3a476f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -132,8 +132,7 @@
 	[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
 	[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
 
-	[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
-					 .len = NL80211_HT_CAPABILITY_LEN },
+	[NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
 
 	[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
 	[NL80211_ATTR_IE] = { .type = NLA_BINARY,
@@ -1253,6 +1252,12 @@
 			goto bad_res;
 		}
 
+		if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+		    netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+
 		nla_for_each_nested(nl_txq_params,
 				    info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
 				    rem_txq_params) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6acba9d..e71f5a6 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2265,6 +2265,9 @@
 
 	kfree(last_request);
 
+	last_request = NULL;
+	dev_set_uevent_suppress(&reg_pdev->dev, true);
+
 	platform_device_unregister(reg_pdev);
 
 	spin_lock_bh(&reg_pending_beacons_lock);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 0fb1424..dc23b31 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -259,17 +259,20 @@
 {
 	const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
 	const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
-	int r;
 
+	/* equal if both missing */
 	if (!ie1 && !ie2)
 		return 0;
-	if (!ie1 || !ie2)
+	/* sort missing IE before (left of) present IE */
+	if (!ie1)
 		return -1;
+	if (!ie2)
+		return 1;
 
-	r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
-	if (r == 0 && ie1[1] != ie2[1])
+	/* sort by length first, then by contents */
+	if (ie1[1] != ie2[1])
 		return ie2[1] - ie1[1];
-	return r;
+	return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
 }
 
 static bool is_bss(struct cfg80211_bss *a,
diff --git a/security/keys/encrypted-keys/Makefile b/security/keys/encrypted-keys/Makefile
index 6bc7a86..d6f8433 100644
--- a/security/keys/encrypted-keys/Makefile
+++ b/security/keys/encrypted-keys/Makefile
@@ -2,5 +2,9 @@
 # Makefile for encrypted keys
 #
 
-obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted.o ecryptfs_format.o
-obj-$(CONFIG_TRUSTED_KEYS) += masterkey_trusted.o
+obj-$(CONFIG_ENCRYPTED_KEYS) += encrypted-keys.o
+
+encrypted-keys-y := encrypted.o ecryptfs_format.o
+masterkey-$(CONFIG_TRUSTED_KEYS) := masterkey_trusted.o
+masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS) := masterkey_trusted.o
+encrypted-keys-y += $(masterkey-y) $(masterkey-m-m)
diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c
index dcc843c..41144f7 100644
--- a/security/keys/encrypted-keys/encrypted.c
+++ b/security/keys/encrypted-keys/encrypted.c
@@ -444,7 +444,7 @@
 		goto out;
 
 	if (IS_ERR(mkey)) {
-		int ret = PTR_ERR(epayload);
+		int ret = PTR_ERR(mkey);
 
 		if (ret == -ENOTSUPP)
 			pr_info("encrypted_key: key %s not supported",
diff --git a/security/keys/encrypted-keys/encrypted.h b/security/keys/encrypted-keys/encrypted.h
index b6ade89..8136a2d 100644
--- a/security/keys/encrypted-keys/encrypted.h
+++ b/security/keys/encrypted-keys/encrypted.h
@@ -2,7 +2,8 @@
 #define __ENCRYPTED_KEY_H
 
 #define ENCRYPTED_DEBUG 0
-#ifdef CONFIG_TRUSTED_KEYS
+#if defined(CONFIG_TRUSTED_KEYS) || \
+  (defined(CONFIG_TRUSTED_KEYS_MODULE) && defined(CONFIG_ENCRYPTED_KEYS_MODULE))
 extern struct key *request_trusted_key(const char *trusted_desc,
 				       u8 **master_key, size_t *master_keylen);
 #else
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index 5b366d7..69ff52c 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -102,7 +102,8 @@
 		key->expiry = 0;
 	}
 
-	kfree_rcu(zap, rcu);
+	if (zap)
+		kfree_rcu(zap, rcu);
 
 error:
 	return ret;
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 6aceef5..5c32f36 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -102,9 +102,6 @@
 
 const char *smack_cipso_option = SMACK_CIPSO_OPTION;
 
-
-#define	SEQ_READ_FINISHED	((loff_t)-1)
-
 /*
  * Values for parsing cipso rules
  * SMK_DIGITLEN: Length of a digit field in a rule.
@@ -357,10 +354,12 @@
 
 	rc = count;
 	/*
+	 * If this is "load" as opposed to "load-self" and a new rule
+	 * it needs to get added for reporting.
 	 * smk_set_access returns true if there was already a rule
 	 * for the subject/object pair, and false if it was new.
 	 */
-	if (!smk_set_access(rule, rule_list, rule_lock)) {
+	if (load && !smk_set_access(rule, rule_list, rule_lock)) {
 		smlp = kzalloc(sizeof(*smlp), GFP_KERNEL);
 		if (smlp != NULL) {
 			smlp->smk_rule = rule;
@@ -377,12 +376,12 @@
 	return rc;
 }
 
-
 /*
- * Seq_file read operations for /smack/load
+ * Core logic for smackfs seq list operations.
  */
 
-static void *load_seq_start(struct seq_file *s, loff_t *pos)
+static void *smk_seq_start(struct seq_file *s, loff_t *pos,
+				struct list_head *head)
 {
 	struct list_head *list;
 
@@ -390,7 +389,7 @@
 	 * This is 0 the first time through.
 	 */
 	if (s->index == 0)
-		s->private = &smack_rule_list;
+		s->private = head;
 
 	if (s->private == NULL)
 		return NULL;
@@ -404,11 +403,12 @@
 	return list;
 }
 
-static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static void *smk_seq_next(struct seq_file *s, void *v, loff_t *pos,
+				struct list_head *head)
 {
 	struct list_head *list = v;
 
-	if (list_is_last(list, &smack_rule_list)) {
+	if (list_is_last(list, head)) {
 		s->private = NULL;
 		return NULL;
 	}
@@ -416,6 +416,25 @@
 	return list->next;
 }
 
+static void smk_seq_stop(struct seq_file *s, void *v)
+{
+	/* No-op */
+}
+
+/*
+ * Seq_file read operations for /smack/load
+ */
+
+static void *load_seq_start(struct seq_file *s, loff_t *pos)
+{
+	return smk_seq_start(s, pos, &smack_rule_list);
+}
+
+static void *load_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	return smk_seq_next(s, v, pos, &smack_rule_list);
+}
+
 static int load_seq_show(struct seq_file *s, void *v)
 {
 	struct list_head *list = v;
@@ -446,16 +465,11 @@
 	return 0;
 }
 
-static void load_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations load_seq_ops = {
 	.start = load_seq_start,
 	.next  = load_seq_next,
 	.show  = load_seq_show,
-	.stop  = load_seq_stop,
+	.stop  = smk_seq_stop,
 };
 
 /**
@@ -574,28 +588,12 @@
 
 static void *cipso_seq_start(struct seq_file *s, loff_t *pos)
 {
-	if (*pos == SEQ_READ_FINISHED)
-		return NULL;
-	if (list_empty(&smack_known_list))
-		return NULL;
-
-	return smack_known_list.next;
+	return smk_seq_start(s, pos, &smack_known_list);
 }
 
 static void *cipso_seq_next(struct seq_file *s, void *v, loff_t *pos)
 {
-	struct list_head  *list = v;
-
-	/*
-	 * labels with no associated cipso value wont be printed
-	 * in cipso_seq_show
-	 */
-	if (list_is_last(list, &smack_known_list)) {
-		*pos = SEQ_READ_FINISHED;
-		return NULL;
-	}
-
-	return list->next;
+	return smk_seq_next(s, v, pos, &smack_known_list);
 }
 
 /*
@@ -634,16 +632,11 @@
 	return 0;
 }
 
-static void cipso_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations cipso_seq_ops = {
 	.start = cipso_seq_start,
-	.stop  = cipso_seq_stop,
 	.next  = cipso_seq_next,
 	.show  = cipso_seq_show,
+	.stop  = smk_seq_stop,
 };
 
 /**
@@ -788,23 +781,12 @@
 
 static void *netlbladdr_seq_start(struct seq_file *s, loff_t *pos)
 {
-	if (*pos == SEQ_READ_FINISHED)
-		return NULL;
-	if (list_empty(&smk_netlbladdr_list))
-		return NULL;
-	return smk_netlbladdr_list.next;
+	return smk_seq_start(s, pos, &smk_netlbladdr_list);
 }
 
 static void *netlbladdr_seq_next(struct seq_file *s, void *v, loff_t *pos)
 {
-	struct list_head *list = v;
-
-	if (list_is_last(list, &smk_netlbladdr_list)) {
-		*pos = SEQ_READ_FINISHED;
-		return NULL;
-	}
-
-	return list->next;
+	return smk_seq_next(s, v, pos, &smk_netlbladdr_list);
 }
 #define BEBITS	(sizeof(__be32) * 8)
 
@@ -828,16 +810,11 @@
 	return 0;
 }
 
-static void netlbladdr_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations netlbladdr_seq_ops = {
 	.start = netlbladdr_seq_start,
-	.stop  = netlbladdr_seq_stop,
 	.next  = netlbladdr_seq_next,
 	.show  = netlbladdr_seq_show,
+	.stop  = smk_seq_stop,
 };
 
 /**
@@ -1405,23 +1382,14 @@
 {
 	struct task_smack *tsp = current_security();
 
-	if (*pos == SEQ_READ_FINISHED)
-		return NULL;
-	if (list_empty(&tsp->smk_rules))
-		return NULL;
-	return tsp->smk_rules.next;
+	return smk_seq_start(s, pos, &tsp->smk_rules);
 }
 
 static void *load_self_seq_next(struct seq_file *s, void *v, loff_t *pos)
 {
 	struct task_smack *tsp = current_security();
-	struct list_head *list = v;
 
-	if (list_is_last(list, &tsp->smk_rules)) {
-		*pos = SEQ_READ_FINISHED;
-		return NULL;
-	}
-	return list->next;
+	return smk_seq_next(s, v, pos, &tsp->smk_rules);
 }
 
 static int load_self_seq_show(struct seq_file *s, void *v)
@@ -1453,16 +1421,11 @@
 	return 0;
 }
 
-static void load_self_seq_stop(struct seq_file *s, void *v)
-{
-	/* No-op */
-}
-
 static const struct seq_operations load_self_seq_ops = {
 	.start = load_self_seq_start,
 	.next  = load_self_seq_next,
 	.show  = load_self_seq_show,
-	.stop  = load_self_seq_stop,
+	.stop  = smk_seq_stop,
 };
 
 
diff --git a/sound/core/vmaster.c b/sound/core/vmaster.c
index 5dbab38..130cfe6 100644
--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -52,6 +52,7 @@
 	struct link_ctl_info info;
 	int vals[2];		/* current values */
 	unsigned int flags;
+	struct snd_kcontrol *kctl; /* original kcontrol pointer */
 	struct snd_kcontrol slave; /* the copy of original control entry */
 };
 
@@ -252,6 +253,7 @@
 		       slave->count * sizeof(*slave->vd), GFP_KERNEL);
 	if (!srec)
 		return -ENOMEM;
+	srec->kctl = slave;
 	srec->slave = *slave;
 	memcpy(srec->slave.vd, slave->vd, slave->count * sizeof(*slave->vd));
 	srec->master = master_link;
@@ -333,10 +335,18 @@
 static void master_free(struct snd_kcontrol *kcontrol)
 {
 	struct link_master *master = snd_kcontrol_chip(kcontrol);
-	struct link_slave *slave;
+	struct link_slave *slave, *n;
 
-	list_for_each_entry(slave, &master->slaves, list)
-		slave->master = NULL;
+	/* free all slave links and retore the original slave kctls */
+	list_for_each_entry_safe(slave, n, &master->slaves, list) {
+		struct snd_kcontrol *sctl = slave->kctl;
+		struct list_head olist = sctl->list;
+		memcpy(sctl, &slave->slave, sizeof(*sctl));
+		memcpy(sctl->vd, slave->slave.vd,
+		       sctl->count * sizeof(*sctl->vd));
+		sctl->list = olist; /* keep the current linked-list */
+		kfree(slave);
+	}
 	kfree(master);
 }
 
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 916a186..e44b107 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2331,6 +2331,39 @@
 	return 0;
 }
 
+typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *);
+
+/* apply the function to all matching slave ctls in the mixer list */
+static int map_slaves(struct hda_codec *codec, const char * const *slaves,
+		      map_slave_func_t func, void *data) 
+{
+	struct hda_nid_item *items;
+	const char * const *s;
+	int i, err;
+
+	items = codec->mixers.list;
+	for (i = 0; i < codec->mixers.used; i++) {
+		struct snd_kcontrol *sctl = items[i].kctl;
+		if (!sctl || !sctl->id.name ||
+		    sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER)
+			continue;
+		for (s = slaves; *s; s++) {
+			if (!strcmp(sctl->id.name, *s)) {
+				err = func(data, sctl);
+				if (err)
+					return err;
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+static int check_slave_present(void *data, struct snd_kcontrol *sctl)
+{
+	return 1;
+}
+
 /**
  * snd_hda_add_vmaster - create a virtual master control and add slaves
  * @codec: HD-audio codec
@@ -2351,12 +2384,10 @@
 			unsigned int *tlv, const char * const *slaves)
 {
 	struct snd_kcontrol *kctl;
-	const char * const *s;
 	int err;
 
-	for (s = slaves; *s && !snd_hda_find_mixer_ctl(codec, *s); s++)
-		;
-	if (!*s) {
+	err = map_slaves(codec, slaves, check_slave_present, NULL);
+	if (err != 1) {
 		snd_printdd("No slave found for %s\n", name);
 		return 0;
 	}
@@ -2367,23 +2398,10 @@
 	if (err < 0)
 		return err;
 
-	for (s = slaves; *s; s++) {
-		struct snd_kcontrol *sctl;
-		int i = 0;
-		for (;;) {
-			sctl = _snd_hda_find_mixer_ctl(codec, *s, i);
-			if (!sctl) {
-				if (!i)
-					snd_printdd("Cannot find slave %s, "
-						    "skipped\n", *s);
-				break;
-			}
-			err = snd_ctl_add_slave(kctl, sctl);
-			if (err < 0)
-				return err;
-			i++;
-		}
-	}
+	err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave,
+			 kctl);
+	if (err < 0)
+		return err;
 	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
@@ -4752,6 +4770,7 @@
 	memset(sequences_hp, 0, sizeof(sequences_hp));
 	assoc_line_out = 0;
 
+	codec->ignore_misc_bit = true;
 	end_nid = codec->start_nid + codec->num_nodes;
 	for (nid = codec->start_nid; nid < end_nid; nid++) {
 		unsigned int wid_caps = get_wcaps(codec, nid);
@@ -4767,6 +4786,9 @@
 			continue;
 
 		def_conf = snd_hda_codec_get_pincfg(codec, nid);
+		if (!(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+		      AC_DEFCFG_MISC_NO_PRESENCE))
+			codec->ignore_misc_bit = false;
 		conn = get_defcfg_connect(def_conf);
 		if (conn == AC_JACK_PORT_NONE)
 			continue;
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 755f2b0..5644711 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -854,6 +854,7 @@
 	unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
 	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
+	unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int power_transition :1; /* power-state in transition */
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 1c8ddf5..7ae7578 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -297,10 +297,18 @@
 					buf + ELD_FIXED_BYTES + mnl + 3 * i);
 	}
 
+	/*
+	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
+	 * in console or for audio devices. Assume the highest speakers
+	 * configuration, to _not_ prohibit multi-channel audio playback.
+	 */
+	if (!e->spk_alloc)
+		e->spk_alloc = 0xffff;
+
+	e->eld_valid = true;
 	return 0;
 
 out_fail:
-	e->eld_ver = 0;
 	return -EINVAL;
 }
 
@@ -323,9 +331,6 @@
 	 * ELD is valid, actual eld_size is assigned in hdmi_update_eld()
 	 */
 
-	if (!eld->eld_valid)
-		return -ENOENT;
-
 	size = snd_hdmi_get_eld_size(codec, nid);
 	if (size == 0) {
 		/* wfg: workaround for ASUS P5E-VM HDMI board */
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index dcbea0d..618ddad 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -510,13 +510,15 @@
 
 static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
 {
-	return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) &&
-		/* disable MISC_NO_PRESENCE check because it may break too
-		 * many devices
-		 */
-		/*(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid) &
-		  AC_DEFCFG_MISC_NO_PRESENCE)) &&*/
-		(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP);
+	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
+		return false;
+	if (!codec->ignore_misc_bit &&
+	    (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+	     AC_DEFCFG_MISC_NO_PRESENCE))
+		return false;
+	if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+		return false;
+	return true;
 }
 
 /* flags for hda_nid_item */
@@ -651,6 +653,9 @@
 	int	spk_alloc;
 	int	sad_count;
 	struct cea_sad sad[ELD_MAX_SAD];
+	/*
+	 * all fields above eld_buffer will be cleared before updating ELD
+	 */
 	char    eld_buffer[ELD_MAX_SIZE];
 #ifdef CONFIG_PROC_FS
 	struct snd_info_entry *proc_entry;
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 2a2d864..2fbab8e 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -237,6 +237,15 @@
 	return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout);
 }
 
+static void cs_update_input_select(struct hda_codec *codec)
+{
+	struct cs_spec *spec = codec->spec;
+	if (spec->cur_adc)
+		snd_hda_codec_write(codec, spec->cur_adc, 0,
+				    AC_VERB_SET_CONNECT_SEL,
+				    spec->adc_idx[spec->cur_input]);
+}
+
 /*
  * Analog capture
  */
@@ -250,6 +259,7 @@
 	spec->cur_adc = spec->adc_nid[spec->cur_input];
 	spec->cur_adc_stream_tag = stream_tag;
 	spec->cur_adc_format = format;
+	cs_update_input_select(codec);
 	snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
 	return 0;
 }
@@ -689,10 +699,8 @@
 					   spec->cur_adc_stream_tag, 0,
 					   spec->cur_adc_format);
 	}
-	snd_hda_codec_write(codec, spec->cur_adc, 0,
-			    AC_VERB_SET_CONNECT_SEL,
-			    spec->adc_idx[idx]);
 	spec->cur_input = idx;
+	cs_update_input_select(codec);
 	return 1;
 }
 
@@ -973,10 +981,7 @@
 		} else  {
 			spec->cur_input = spec->last_input;
 		}
-
-		snd_hda_codec_write_cache(codec, spec->cur_adc, 0,
-					AC_VERB_SET_CONNECT_SEL,
-					spec->adc_idx[spec->cur_input]);
+		cs_update_input_select(codec);
 	} else {
 		if (present)
 			change_cur_input(codec, spec->automic_idx, 0);
@@ -1073,9 +1078,7 @@
 			cs_automic(codec);
 		else  {
 			spec->cur_adc = spec->adc_nid[spec->cur_input];
-			snd_hda_codec_write(codec, spec->cur_adc, 0,
-					AC_VERB_SET_CONNECT_SEL,
-					spec->adc_idx[spec->cur_input]);
+			cs_update_input_select(codec);
 		}
 	} else {
 		change_cur_input(codec, spec->cur_input, 1);
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 5e706e4..0de2119 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3062,7 +3062,6 @@
 	SND_PCI_QUIRK(0x1043, 0x1993, "Asus U50F", CXT5066_ASUS),
 	SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
-	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
 		      CXT5066_LAPTOP),
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 81b7b79..9850c5b 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -65,7 +65,10 @@
 	hda_nid_t pin_nid;
 	int num_mux_nids;
 	hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
+
+	struct hda_codec *codec;
 	struct hdmi_eld sink_eld;
+	struct delayed_work work;
 };
 
 struct hdmi_spec {
@@ -745,8 +748,7 @@
  * Unsolicited events
  */
 
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
-			       struct hdmi_eld *eld);
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry);
 
 static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
 {
@@ -755,7 +757,6 @@
 	int pd = !!(res & AC_UNSOL_RES_PD);
 	int eldv = !!(res & AC_UNSOL_RES_ELDV);
 	int pin_idx;
-	struct hdmi_eld *eld;
 
 	printk(KERN_INFO
 		"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
@@ -764,17 +765,8 @@
 	pin_idx = pin_nid_to_pin_index(spec, pin_nid);
 	if (pin_idx < 0)
 		return;
-	eld = &spec->pins[pin_idx].sink_eld;
 
-	hdmi_present_sense(codec, pin_nid, eld);
-
-	/*
-	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
-	 * in console or for audio devices. Assume the highest speakers
-	 * configuration, to _not_ prohibit multi-channel audio playback.
-	 */
-	if (!eld->spk_alloc)
-		eld->spk_alloc = 0xffff;
+	hdmi_present_sense(&spec->pins[pin_idx], true);
 }
 
 static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
@@ -968,9 +960,11 @@
 	return 0;
 }
 
-static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
-			       struct hdmi_eld *eld)
+static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, bool retry)
 {
+	struct hda_codec *codec = per_pin->codec;
+	struct hdmi_eld *eld = &per_pin->sink_eld;
+	hda_nid_t pin_nid = per_pin->pin_nid;
 	/*
 	 * Always execute a GetPinSense verb here, even when called from
 	 * hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited
@@ -980,26 +974,39 @@
 	 * the unsolicited response to avoid custom WARs.
 	 */
 	int present = snd_hda_pin_sense(codec, pin_nid);
+	bool eld_valid = false;
 
-	memset(eld, 0, sizeof(*eld));
+	memset(eld, 0, offsetof(struct hdmi_eld, eld_buffer));
 
 	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
 	if (eld->monitor_present)
-		eld->eld_valid	= !!(present & AC_PINSENSE_ELDV);
-	else
-		eld->eld_valid	= 0;
+		eld_valid	= !!(present & AC_PINSENSE_ELDV);
 
 	printk(KERN_INFO
 		"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
-		codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+		codec->addr, pin_nid, eld->monitor_present, eld_valid);
 
-	if (eld->eld_valid)
+	if (eld_valid) {
 		if (!snd_hdmi_get_eld(eld, codec, pin_nid))
 			snd_hdmi_show_eld(eld);
+		else if (retry) {
+			queue_delayed_work(codec->bus->workq,
+					   &per_pin->work,
+					   msecs_to_jiffies(300));
+		}
+	}
 
 	snd_hda_input_jack_report(codec, pin_nid);
 }
 
+static void hdmi_repoll_eld(struct work_struct *work)
+{
+	struct hdmi_spec_per_pin *per_pin =
+	container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
+
+	hdmi_present_sense(per_pin, false);
+}
+
 static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
 {
 	struct hdmi_spec *spec = codec->spec;
@@ -1228,7 +1235,7 @@
 	if (err < 0)
 		return err;
 
-	hdmi_present_sense(codec, per_pin->pin_nid, &per_pin->sink_eld);
+	hdmi_present_sense(per_pin, false);
 	return 0;
 }
 
@@ -1279,6 +1286,8 @@
 				    AC_VERB_SET_UNSOLICITED_ENABLE,
 				    AC_USRSP_EN | pin_nid);
 
+		per_pin->codec = codec;
+		INIT_DELAYED_WORK(&per_pin->work, hdmi_repoll_eld);
 		snd_hda_eld_proc_new(codec, eld, pin_idx);
 	}
 	return 0;
@@ -1293,10 +1302,12 @@
 		struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
 		struct hdmi_eld *eld = &per_pin->sink_eld;
 
+		cancel_delayed_work(&per_pin->work);
 		snd_hda_eld_proc_free(codec, eld);
 	}
 	snd_hda_input_jack_free(codec);
 
+	flush_workqueue(codec->bus->workq);
 	kfree(spec);
 }
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index a24e068..336d14e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -284,7 +284,7 @@
 	struct alc_spec *spec = codec->spec;
 	const struct hda_input_mux *imux;
 	unsigned int mux_idx;
-	int i, type;
+	int i, type, num_conns;
 	hda_nid_t nid;
 
 	mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
@@ -307,16 +307,17 @@
 		spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
 
 	/* no selection? */
-	if (snd_hda_get_conn_list(codec, nid, NULL) <= 1)
+	num_conns = snd_hda_get_conn_list(codec, nid, NULL);
+	if (num_conns <= 1)
 		return 1;
 
 	type = get_wcaps_type(get_wcaps(codec, nid));
 	if (type == AC_WID_AUD_MIX) {
 		/* Matrix-mixer style (e.g. ALC882) */
-		for (i = 0; i < imux->num_items; i++) {
-			unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
-			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
-						 imux->items[i].index,
+		int active = imux->items[idx].index;
+		for (i = 0; i < num_conns; i++) {
+			unsigned int v = (i == active) ? 0 : HDA_AMP_MUTE;
+			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, i,
 						 HDA_AMP_MUTE, v);
 		}
 	} else {
@@ -1451,7 +1452,7 @@
 		switch (fix->type) {
 		case ALC_FIXUP_SKU:
 			if (action != ALC_FIXUP_ACT_PRE_PROBE || !fix->v.sku)
-				break;;
+				break;
 			snd_printdd(KERN_INFO "hda_codec: %s: "
 				    "Apply sku override for %s\n",
 				    codec->chip_name, modelname);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 4e715fe..470f6f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -95,6 +95,7 @@
 	STAC_92HD83XXX_REF,
 	STAC_92HD83XXX_PWR_REF,
 	STAC_DELL_S14,
+	STAC_DELL_VOSTRO_3500,
 	STAC_92HD83XXX_HP,
 	STAC_92HD83XXX_HP_cNB11_INTQUAD,
 	STAC_HP_DV7_4000,
@@ -226,7 +227,6 @@
 
 	/* power management */
 	unsigned int num_pwrs;
-	const unsigned int *pwr_mapping;
 	const hda_nid_t *pwr_nids;
 	const hda_nid_t *dac_list;
 
@@ -373,18 +373,15 @@
 
 #define STAC92HD83_DAC_COUNT 3
 
-static const hda_nid_t stac92hd83xxx_pwr_nids[4] = {
-	0xa, 0xb, 0xd, 0xe,
+static const hda_nid_t stac92hd83xxx_pwr_nids[7] = {
+	0x0a, 0x0b, 0x0c, 0xd, 0x0e,
+	0x0f, 0x10
 };
 
 static const hda_nid_t stac92hd83xxx_slave_dig_outs[2] = {
 	0x1e, 0,
 };
 
-static const unsigned int stac92hd83xxx_pwr_mapping[4] = {
-	0x03, 0x0c, 0x20, 0x40,
-};
-
 static const hda_nid_t stac92hd83xxx_dmic_nids[] = {
 		0x11, 0x20,
 };
@@ -1659,6 +1656,12 @@
 	0x40f000f0, 0x40f000f0,
 };
 
+static const unsigned int dell_vostro_3500_pin_configs[10] = {
+	0x02a11020, 0x0221101f, 0x400000f0, 0x90170110,
+	0x400000f1, 0x400000f2, 0x400000f3, 0x90a60160,
+	0x400000f4, 0x400000f5,
+};
+
 static const unsigned int hp_dv7_4000_pin_configs[10] = {
 	0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110,
 	0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140,
@@ -1675,6 +1678,7 @@
 	[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
 	[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
 	[STAC_DELL_S14] = dell_s14_pin_configs,
+	[STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs,
 	[STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs,
 	[STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
 };
@@ -1684,6 +1688,7 @@
 	[STAC_92HD83XXX_REF] = "ref",
 	[STAC_92HD83XXX_PWR_REF] = "mic-ref",
 	[STAC_DELL_S14] = "dell-s14",
+	[STAC_DELL_VOSTRO_3500] = "dell-vostro-3500",
 	[STAC_92HD83XXX_HP] = "hp",
 	[STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad",
 	[STAC_HP_DV7_4000] = "hp-dv7-4000",
@@ -1697,6 +1702,8 @@
 		      "DFI LanParty", STAC_92HD83XXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
 		      "unknown Dell", STAC_DELL_S14),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x1028,
+		      "Dell Vostro 3500", STAC_DELL_VOSTRO_3500),
 	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600,
 			  "HP", STAC_92HD83XXX_HP),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1656,
@@ -4459,8 +4466,12 @@
 				stac_toggle_power_map(codec, nid, 1);
 			continue;
 		}
-		if (enable_pin_detect(codec, nid, STAC_PWR_EVENT))
+		if (enable_pin_detect(codec, nid, STAC_PWR_EVENT)) {
 			stac_issue_unsol_event(codec, nid);
+			continue;
+		}
+		/* none of the above, turn the port OFF */
+		stac_toggle_power_map(codec, nid, 0);
 	}
 
 	/* sync mute LED */
@@ -4716,11 +4727,7 @@
 	if (idx >= spec->num_pwrs)
 		return;
 
-	/* several codecs have two power down bits */
-	if (spec->pwr_mapping)
-		idx = spec->pwr_mapping[idx];
-	else
-		idx = 1 << idx;
+	idx = 1 << idx;
 
 	val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
 	if (enable)
@@ -5618,9 +5625,6 @@
 		snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e);
 	}
 
-	/* reset pin power-down; Windows may leave these bits after reboot */
-	snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7EC, 0);
-	snd_hda_codec_write_cache(codec, codec->afg, 0, 0x7ED, 0);
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
 
@@ -5630,7 +5634,6 @@
 	codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
 	spec->digbeep_nid = 0x21;
 	spec->pwr_nids = stac92hd83xxx_pwr_nids;
-	spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
 	spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
 	spec->multiout.dac_nids = spec->dac_nids;
 	spec->init = stac92hd83xxx_core_init;
@@ -5647,9 +5650,6 @@
 		stac92xx_set_config_regs(codec,
 				stac92hd83xxx_brd_tbl[spec->board_config]);
 
-	if (spec->board_config != STAC_92HD83XXX_PWR_REF)
-		spec->num_pwrs = 0;
-
 	codec->patch_ops = stac92xx_patch_ops;
 
 	if (find_mute_led_gpio(codec, 0))
@@ -5858,8 +5858,6 @@
 		    (codec->revision_id & 0xf) == 1)
 			spec->stream_delay = 40; /* 40 milliseconds */
 
-		/* no output amps */
-		spec->num_pwrs = 0;
 		/* disable VSW */
 		spec->init = stac92hd71bxx_core_init;
 		unmute_init++;
@@ -5874,8 +5872,6 @@
 		if ((codec->revision_id & 0xf) == 1)
 			spec->stream_delay = 40; /* 40 milliseconds */
 
-		/* no output amps */
-		spec->num_pwrs = 0;
 		/* fallthru */
 	default:
 		spec->init = stac92hd71bxx_core_init;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 29e3125..11718b49 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1077,6 +1077,13 @@
 		}
 		if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV))
 			continue;
+
+		/* IO read operation is very expensive inside virtual machine
+		 * as it is emulated. The probability that subsequent PICB read
+		 * will return different result is high enough to loop till
+		 * timeout here.
+		 * Same CIV is strict enough condition to be sure that PICB
+		 * is valid inside VM on emulated card. */
 		if (chip->inside_vm)
 			break;
 		if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
@@ -2930,6 +2937,45 @@
 	ICH_PCR, ICH_SCR, ICH_SIS_TCR
 };
 
+static int __devinit snd_intel8x0_inside_vm(struct pci_dev *pci)
+{
+	int result  = inside_vm;
+	char *msg   = NULL;
+
+	/* check module parameter first (override detection) */
+	if (result >= 0) {
+		msg = result ? "enable (forced) VM" : "disable (forced) VM";
+		goto fini;
+	}
+
+	/* detect KVM and Parallels virtual environments */
+	result = kvm_para_available();
+#ifdef X86_FEATURE_HYPERVISOR
+	result = result || boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#endif
+	if (!result)
+		goto fini;
+
+	/* check for known (emulated) devices */
+	if (pci->subsystem_vendor == 0x1af4 &&
+	    pci->subsystem_device == 0x1100) {
+		/* KVM emulated sound, PCI SSID: 1af4:1100 */
+		msg = "enable KVM";
+	} else if (pci->subsystem_vendor == 0x1ab8) {
+		/* Parallels VM emulated sound, PCI SSID: 1ab8:xxxx */
+		msg = "enable Parallels VM";
+	} else {
+		msg = "disable (unknown or VT-d) VM";
+		result = 0;
+	}
+
+fini:
+	if (msg != NULL)
+		printk(KERN_INFO "intel8x0: %s optimization\n", msg);
+
+	return result;
+}
+
 static int __devinit snd_intel8x0_create(struct snd_card *card,
 					 struct pci_dev *pci,
 					 unsigned long device_type,
@@ -2997,9 +3043,7 @@
 	if (xbox)
 		chip->xbox = 1;
 
-	chip->inside_vm = inside_vm;
-	if (inside_vm)
-		printk(KERN_INFO "intel8x0: enable KVM optimization\n");
+	chip->inside_vm = snd_intel8x0_inside_vm(pci);
 
 	if (pci->vendor == PCI_VENDOR_ID_INTEL &&
 	    pci->device == PCI_DEVICE_ID_INTEL_440MX)
@@ -3243,14 +3287,6 @@
 			buggy_irq = 0;
 	}
 
-	if (inside_vm < 0) {
-		/* detect KVM and Parallels virtual environments */
-		inside_vm = kvm_para_available();
-#if defined(__i386__) || defined(__x86_64__)
-		inside_vm = inside_vm || boot_cpu_has(X86_FEATURE_HYPERVISOR);
-#endif
-	}
-
 	if ((err = snd_intel8x0_create(card, pci, pci_id->driver_data,
 				       &chip)) < 0) {
 		snd_card_free(card);
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index a3ce1b2..1aa52ef 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -876,7 +876,7 @@
 		(0x0fUL << 12) |
 		(PS3_AUDIO_IOID);
 
-	ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0);
+	ret = lv1_gpu_attribute(0x100, 0x007, val);
 	if (ret)
 		pr_info("%s: gpu_attribute failed %d\n", __func__,
 			ret);
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 6b73efd..9c982e4 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -56,7 +56,7 @@
 static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
 {
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
-	struct wm8994 *control = wm8994->control_data;
+	struct wm8994 *control = codec->control_data;
 
 	switch (reg) {
 	case WM8994_GPIO_1:
@@ -3030,19 +3030,34 @@
 {
 	struct wm8994_priv *wm8994 = data;
 	struct snd_soc_codec *codec = wm8994->codec;
-	int reg;
+	int reg, count;
 
-	reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
-	if (reg < 0) {
-		dev_err(codec->dev, "Failed to read mic detect status: %d\n",
-			reg);
-		return IRQ_NONE;
-	}
+	/* We may occasionally read a detection without an impedence
+	 * range being provided - if that happens loop again.
+	 */
+	count = 10;
+	do {
+		reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+		if (reg < 0) {
+			dev_err(codec->dev,
+				"Failed to read mic detect status: %d\n",
+				reg);
+			return IRQ_NONE;
+		}
 
-	if (!(reg & WM8958_MICD_VALID)) {
-		dev_dbg(codec->dev, "Mic detect data not valid\n");
-		goto out;
-	}
+		if (!(reg & WM8958_MICD_VALID)) {
+			dev_dbg(codec->dev, "Mic detect data not valid\n");
+			goto out;
+		}
+
+		if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+			break;
+
+		msleep(1);
+	} while (count--);
+
+	if (count == 0)
+		dev_warn(codec->dev, "No impedence range reported for jack\n");
 
 #ifndef CONFIG_SND_SOC_WM8994_MODULE
 	trace_snd_soc_jack_irq(dev_name(codec->dev));
@@ -3180,9 +3195,9 @@
 
 	wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
 			   wm8994_fifo_error, "FIFO error", codec);
-	wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+	wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
 			   wm8994_temp_warn, "Thermal warning", codec);
-	wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+	wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
 			   wm8994_temp_shut, "Thermal shutdown", codec);
 
 	ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 60f65ac..ab23869 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -765,10 +765,61 @@
  * interface to ALSA control for feature/mixer units
  */
 
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+				  struct snd_kcontrol *kctl)
+{
+	switch (cval->mixer->chip->usb_id) {
+	case USB_ID(0x0471, 0x0101):
+	case USB_ID(0x0471, 0x0104):
+	case USB_ID(0x0471, 0x0105):
+	case USB_ID(0x0672, 0x1041):
+	/* quirk for UDA1321/N101.
+	 * note that detection between firmware 2.1.1.7 (N101)
+	 * and later 2.1.1.21 is not very clear from datasheets.
+	 * I hope that the min value is -15360 for newer firmware --jk
+	 */
+		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+		    cval->min == -15616) {
+			snd_printk(KERN_INFO
+				 "set volume quirk for UDA1321/N101 chip\n");
+			cval->max = -256;
+		}
+		break;
+
+	case USB_ID(0x046d, 0x09a4):
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set volume quirk for QuickCam E3500\n");
+			cval->min = 6080;
+			cval->max = 8768;
+			cval->res = 192;
+		}
+		break;
+
+	case USB_ID(0x046d, 0x0808):
+	case USB_ID(0x046d, 0x0809):
+	case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+	case USB_ID(0x046d, 0x0991):
+	/* Most audio usb devices lie about volume resolution.
+	 * Most Logitech webcams have res = 384.
+	 * Proboly there is some logitech magic behind this number --fishor
+	 */
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set resolution quirk: cval->res = 384\n");
+			cval->res = 384;
+		}
+		break;
+
+	}
+}
+
 /*
  * retrieve the minimum and maximum values for the specified control
  */
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+				   int default_min, struct snd_kcontrol *kctl)
 {
 	/* for failsafe */
 	cval->min = default_min;
@@ -844,6 +895,9 @@
 		cval->initialized = 1;
 	}
 
+	if (kctl)
+		volume_control_quirks(cval, kctl);
+
 	/* USB descriptions contain the dB scale in 1/256 dB unit
 	 * while ALSA TLV contains in 1/100 dB unit
 	 */
@@ -864,6 +918,7 @@
 	return 0;
 }
 
+#define get_min_max(cval, def)	get_min_max_with_quirks(cval, def, NULL)
 
 /* get a feature/mixer unit info */
 static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
@@ -882,7 +937,7 @@
 		uinfo->value.integer.max = 1;
 	} else {
 		if (!cval->initialized) {
-			get_min_max(cval, 0);
+			get_min_max_with_quirks(cval, 0, kcontrol);
 			if (cval->initialized && cval->dBmin >= cval->dBmax) {
 				kcontrol->vd[0].access &= 
 					~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1045,9 +1100,6 @@
 		cval->ch_readonly = readonly_mask;
 	}
 
-	/* get min/max values */
-	get_min_max(cval, 0);
-
 	/* if all channels in the mask are marked read-only, make the control
 	 * read-only. set_cur_mix_value() will check the mask again and won't
 	 * issue write commands to read-only channels. */
@@ -1069,6 +1121,9 @@
 		len = snd_usb_copy_string_desc(state, nameid,
 				kctl->id.name, sizeof(kctl->id.name));
 
+	/* get min/max values */
+	get_min_max_with_quirks(cval, 0, kctl);
+
 	switch (control) {
 	case UAC_FU_MUTE:
 	case UAC_FU_VOLUME:
@@ -1118,51 +1173,6 @@
 		break;
 	}
 
-	/* volume control quirks */
-	switch (state->chip->usb_id) {
-	case USB_ID(0x0471, 0x0101):
-	case USB_ID(0x0471, 0x0104):
-	case USB_ID(0x0471, 0x0105):
-	case USB_ID(0x0672, 0x1041):
-	/* quirk for UDA1321/N101.
-	 * note that detection between firmware 2.1.1.7 (N101)
-	 * and later 2.1.1.21 is not very clear from datasheets.
-	 * I hope that the min value is -15360 for newer firmware --jk
-	 */
-		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
-		    cval->min == -15616) {
-			snd_printk(KERN_INFO
-				 "set volume quirk for UDA1321/N101 chip\n");
-			cval->max = -256;
-		}
-		break;
-
-	case USB_ID(0x046d, 0x09a4):
-		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
-			snd_printk(KERN_INFO
-				"set volume quirk for QuickCam E3500\n");
-			cval->min = 6080;
-			cval->max = 8768;
-			cval->res = 192;
-		}
-		break;
-
-	case USB_ID(0x046d, 0x0808):
-	case USB_ID(0x046d, 0x0809):
-	case USB_ID(0x046d, 0x0991):
-	/* Most audio usb devices lie about volume resolution.
-	 * Most Logitech webcams have res = 384.
-	 * Proboly there is some logitech magic behind this number --fishor
-	 */
-		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
-			snd_printk(KERN_INFO
-				"set resolution quirk: cval->res = 384\n");
-			cval->res = 384;
-		}
-		break;
-
-	}
-
 	range = (cval->max - cval->min) / cval->res;
 	/* Are there devices with volume range more than 255? I use a bit more
 	 * to be sure. 384 is a resolution magic number found on Logitech
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 2e5bc73..a3ddac0 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -137,12 +137,12 @@
 		return -ENOMEM;
 	}
 	if (fp->nr_rates > 0) {
-		rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL);
+		rate_table = kmemdup(fp->rate_table,
+				     sizeof(int) * fp->nr_rates, GFP_KERNEL);
 		if (!rate_table) {
 			kfree(fp);
 			return -ENOMEM;
 		}
-		memcpy(rate_table, fp->rate_table, sizeof(int) * fp->nr_rates);
 		fp->rate_table = rate_table;
 	}
 
@@ -224,10 +224,9 @@
 	if (altsd->bNumEndpoints != 1)
 		return -ENXIO;
 
-	fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+	fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
-	memcpy(fp, &ua_format, sizeof(*fp));
 
 	fp->iface = altsd->bInterfaceNumber;
 	fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 8d02ccb..8b4c253 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -42,6 +42,7 @@
 $default{"BISECT_SKIP"}		= 1;
 $default{"SUCCESS_LINE"}	= "login:";
 $default{"DETECT_TRIPLE_FAULT"} = 1;
+$default{"NO_INSTALL"}		= 0;
 $default{"BOOTED_TIMEOUT"}	= 1;
 $default{"DIE_ON_FAILURE"}	= 1;
 $default{"SSH_EXEC"}		= "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
@@ -84,6 +85,7 @@
 my $target;
 my $make;
 my $post_install;
+my $no_install;
 my $noclean;
 my $minconfig;
 my $start_minconfig;
@@ -115,6 +117,7 @@
 my $booted_timeout;
 my $detect_triplefault;
 my $console;
+my $reboot_success_line;
 my $success_line;
 my $stop_after_success;
 my $stop_after_failure;
@@ -130,6 +133,12 @@
 my %variable;
 my %force_config;
 
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
 $config_help{"MACHINE"} = << "EOF"
  The machine hostname that you will test.
 EOF
@@ -241,6 +250,7 @@
 
 sub get_ktest_config {
     my ($config) = @_;
+    my $ans;
 
     return if (defined($opt{$config}));
 
@@ -254,16 +264,17 @@
 	if (defined($default{$config})) {
 	    print "\[$default{$config}\] ";
 	}
-	$entered_configs{$config} = <STDIN>;
-	$entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
-	if ($entered_configs{$config} =~ /^\s*$/) {
+	$ans = <STDIN>;
+	$ans =~ s/^\s*(.*\S)\s*$/$1/;
+	if ($ans =~ /^\s*$/) {
 	    if ($default{$config}) {
-		$entered_configs{$config} = $default{$config};
+		$ans = $default{$config};
 	    } else {
 		print "Your answer can not be blank\n";
 		next;
 	    }
 	}
+	$entered_configs{$config} = process_variables($ans);
 	last;
     }
 }
@@ -298,7 +309,7 @@
 }
 
 sub process_variables {
-    my ($value) = @_;
+    my ($value, $remove_undef) = @_;
     my $retval = "";
 
     # We want to check for '\', and it is just easier
@@ -316,6 +327,10 @@
 	$retval = "$retval$begin";
 	if (defined($variable{$var})) {
 	    $retval = "$retval$variable{$var}";
+	} elsif (defined($remove_undef) && $remove_undef) {
+	    # for if statements, any variable that is not defined,
+	    # we simple convert to 0
+	    $retval = "${retval}0";
 	} else {
 	    # put back the origin piece.
 	    $retval = "$retval\$\{$var\}";
@@ -331,10 +346,17 @@
 }
 
 sub set_value {
-    my ($lvalue, $rvalue) = @_;
+    my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
 
     if (defined($opt{$lvalue})) {
-	die "Error: Option $lvalue defined more than once!\n";
+	if (!$override || defined(${$overrides}{$lvalue})) {
+	    my $extra = "";
+	    if ($override) {
+		$extra = "In the same override section!\n";
+	    }
+	    die "$name: $.: Option $lvalue defined more than once!\n$extra";
+	}
+	${$overrides}{$lvalue} = $rvalue;
     }
     if ($rvalue =~ /^\s*$/) {
 	delete $opt{$lvalue};
@@ -355,86 +377,274 @@
     }
 }
 
-sub read_config {
-    my ($config) = @_;
+sub process_compare {
+    my ($lval, $cmp, $rval) = @_;
 
-    open(IN, $config) || die "can't read file $config";
+    # remove whitespace
+
+    $lval =~ s/^\s*//;
+    $lval =~ s/\s*$//;
+
+    $rval =~ s/^\s*//;
+    $rval =~ s/\s*$//;
+
+    if ($cmp eq "==") {
+	return $lval eq $rval;
+    } elsif ($cmp eq "!=") {
+	return $lval ne $rval;
+    }
+
+    my $statement = "$lval $cmp $rval";
+    my $ret = eval $statement;
+
+    # $@ stores error of eval
+    if ($@) {
+	return -1;
+    }
+
+    return $ret;
+}
+
+sub value_defined {
+    my ($val) = @_;
+
+    return defined($variable{$2}) ||
+	defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+    my ($name, $val) = @_;
+
+    my $c = $d++;
+
+    while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+	my $express = $1;
+
+	if (process_expression($name, $express)) {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+	} else {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+	}
+    }
+
+    $d--;
+    my $OR = "\\|\\|";
+    my $AND = "\\&\\&";
+
+    while ($val =~ s/^(.*?)($OR|$AND)//) {
+	my $express = $1;
+	my $op = $2;
+
+	if (process_expression($name, $express)) {
+	    if ($op eq "||") {
+		return 1;
+	    }
+	} else {
+	    if ($op eq "&&") {
+		return 0;
+	    }
+	}
+    }
+
+    if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
+	my $ret = process_compare($1, $2, $3);
+	if ($ret < 0) {
+	    die "$name: $.: Unable to process comparison\n";
+	}
+	return $ret;
+    }
+
+    if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+	if (defined $1) {
+	    return !value_defined($2);
+	} else {
+	    return value_defined($2);
+	}
+    }
+
+    if ($val =~ /^\s*0\s*$/) {
+	return 0;
+    } elsif ($val =~ /^\s*\d+\s*$/) {
+	return 1;
+    }
+
+    die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+    my ($name, $value) = @_;
+
+    # Convert variables and replace undefined ones with 0
+    my $val = process_variables($value, 1);
+    my $ret = process_expression $name, $val;
+
+    return $ret;
+}
+
+sub __read_config {
+    my ($config, $current_test_num) = @_;
+
+    my $in;
+    open($in, $config) || die "can't read file $config";
 
     my $name = $config;
     $name =~ s,.*/(.*),$1,;
 
-    my $test_num = 0;
+    my $test_num = $$current_test_num;
     my $default = 1;
     my $repeat = 1;
     my $num_tests_set = 0;
     my $skip = 0;
     my $rest;
+    my $line;
     my $test_case = 0;
+    my $if = 0;
+    my $if_set = 0;
+    my $override = 0;
 
-    while (<IN>) {
+    my %overrides;
+
+    while (<$in>) {
 
 	# ignore blank lines and comments
 	next if (/^\s*$/ || /\s*\#/);
 
-	if (/^\s*TEST_START(.*)/) {
+	if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
 
-	    $rest = $1;
+	    my $type = $1;
+	    $rest = $2;
+	    $line = $2;
 
-	    if ($num_tests_set) {
-		die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+	    my $old_test_num;
+	    my $old_repeat;
+	    $override = 0;
+
+	    if ($type eq "TEST_START") {
+
+		if ($num_tests_set) {
+		    die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+		}
+
+		$old_test_num = $test_num;
+		$old_repeat = $repeat;
+
+		$test_num += $repeat;
+		$default = 0;
+		$repeat = 1;
+	    } else {
+		$default = 1;
 	    }
 
-	    my $old_test_num = $test_num;
-	    my $old_repeat = $repeat;
-
-	    $test_num += $repeat;
-	    $default = 0;
-	    $repeat = 1;
-
-	    if ($rest =~ /\s+SKIP(.*)/) {
-		$rest = $1;
+	    # If SKIP is anywhere in the line, the command will be skipped
+	    if ($rest =~ s/\s+SKIP\b//) {
 		$skip = 1;
 	    } else {
 		$test_case = 1;
 		$skip = 0;
 	    }
 
-	    if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
-		$repeat = $1;
-		$rest = $2;
-		$repeat_tests{"$test_num"} = $repeat;
+	    if ($rest =~ s/\sELSE\b//) {
+		if (!$if) {
+		    die "$name: $.: ELSE found with out matching IF section\n$_";
+		}
+		$if = 0;
+
+		if ($if_set) {
+		    $skip = 1;
+		} else {
+		    $skip = 0;
+		}
 	    }
 
-	    if ($rest =~ /\s+SKIP(.*)/) {
-		$rest = $1;
-		$skip = 1;
+	    if ($rest =~ s/\sIF\s+(.*)//) {
+		if (process_if($name, $1)) {
+		    $if_set = 1;
+		} else {
+		    $skip = 1;
+		}
+		$if = 1;
+	    } else {
+		$if = 0;
+		$if_set = 0;
 	    }
 
-	    if ($rest !~ /^\s*$/) {
-		die "$name: $.: Gargbage found after TEST_START\n$_";
+	    if (!$skip) {
+		if ($type eq "TEST_START") {
+		    if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+			$repeat = $1;
+			$repeat_tests{"$test_num"} = $repeat;
+		    }
+		} elsif ($rest =~ s/\sOVERRIDE\b//) {
+		    # DEFAULT only
+		    $override = 1;
+		    # Clear previous overrides
+		    %overrides = ();
+		}
 	    }
 
-	    if ($skip) {
+	    if (!$skip && $rest !~ /^\s*$/) {
+		die "$name: $.: Gargbage found after $type\n$_";
+	    }
+
+	    if ($skip && $type eq "TEST_START") {
 		$test_num = $old_test_num;
 		$repeat = $old_repeat;
 	    }
 
-	} elsif (/^\s*DEFAULTS(.*)$/) {
-	    $default = 1;
-
+	} elsif (/^\s*ELSE\b(.*)$/) {
+	    if (!$if) {
+		die "$name: $.: ELSE found with out matching IF section\n$_";
+	    }
 	    $rest = $1;
-
-	    if ($rest =~ /\s+SKIP(.*)/) {
-		$rest = $1;
+	    if ($if_set) {
 		$skip = 1;
+		$rest = "";
 	    } else {
 		$skip = 0;
+
+		if ($rest =~ /\sIF\s+(.*)/) {
+		    # May be a ELSE IF section.
+		    if (!process_if($name, $1)) {
+			$skip = 1;
+		    }
+		    $rest = "";
+		} else {
+		    $if = 0;
+		}
 	    }
 
 	    if ($rest !~ /^\s*$/) {
 		die "$name: $.: Gargbage found after DEFAULTS\n$_";
 	    }
 
+	} elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+	    next if ($skip);
+
+	    if (!$default) {
+		die "$name: $.: INCLUDE can only be done in default sections\n$_";
+	    }
+
+	    my $file = process_variables($1);
+
+	    if ($file !~ m,^/,) {
+		# check the path of the config file first
+		if ($config =~ m,(.*)/,) {
+		    if (-f "$1/$file") {
+			$file = "$1/$file";
+		    }
+		}
+	    }
+		
+	    if ( ! -r $file ) {
+		die "$name: $.: Can't read file $file\n$_";
+	    }
+
+	    if (__read_config($file, \$test_num)) {
+		$test_case = 1;
+	    }
+
 	} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
 
 	    next if ($skip);
@@ -460,10 +670,10 @@
 	    }
 
 	    if ($default || $lvalue =~ /\[\d+\]$/) {
-		set_value($lvalue, $rvalue);
+		set_value($lvalue, $rvalue, $override, \%overrides, $name);
 	    } else {
 		my $val = "$lvalue\[$test_num\]";
-		set_value($val, $rvalue);
+		set_value($val, $rvalue, $override, \%overrides, $name);
 
 		if ($repeat > 1) {
 		    $repeats{$val} = $repeat;
@@ -490,13 +700,26 @@
 	}
     }
 
-    close(IN);
-
     if ($test_num) {
 	$test_num += $repeat - 1;
 	$opt{"NUM_TESTS"} = $test_num;
     }
 
+    close($in);
+
+    $$current_test_num = $test_num;
+
+    return $test_case;
+}
+
+sub read_config {
+    my ($config) = @_;
+
+    my $test_case;
+    my $test_num = 0;
+
+    $test_case = __read_config $config, \$test_num;
+
     # make sure we have all mandatory configs
     get_ktest_configs;
 
@@ -524,6 +747,18 @@
     # Add space to evaluate the character before $
     $option = " $option";
     my $retval = "";
+    my $repeated = 0;
+    my $parent = 0;
+
+    foreach my $test (keys %repeat_tests) {
+	if ($i >= $test &&
+	    $i < $test + $repeat_tests{$test}) {
+
+	    $repeated = 1;
+	    $parent = $test;
+	    last;
+	}
+    }
 
     while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
 	my $start = $1;
@@ -537,10 +772,14 @@
 	# otherwise see if the default OPT (without [$i]) exists.
 
 	my $o = "$var\[$i\]";
+	my $parento = "$var\[$parent\]";
 
 	if (defined($opt{$o})) {
 	    $o = $opt{$o};
 	    $retval = "$retval$o";
+	} elsif ($repeated && defined($opt{$parento})) {
+	    $o = $opt{$parento};
+	    $retval = "$retval$o";
 	} elsif (defined($opt{$var})) {
 	    $o = $opt{$var};
 	    $retval = "$retval$o";
@@ -603,8 +842,20 @@
 }
 
 sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
 
 sub reboot {
+    my ($time) = @_;
+
+    if (defined($time)) {
+	start_monitor;
+	# flush out current monitor
+	# May contain the reboot success line
+	wait_for_monitor 1;
+    }
+
     # try to reboot normally
     if (run_command $reboot) {
 	if (defined($powercycle_after_reboot)) {
@@ -615,12 +866,17 @@
 	# nope? power cycle it.
 	run_command "$power_cycle";
     }
+
+    if (defined($time)) {
+	wait_for_monitor($time, $reboot_success_line);
+	end_monitor;
+    }
 }
 
 sub do_not_reboot {
     my $i = $iteration;
 
-    return $test_type eq "build" ||
+    return $test_type eq "build" || $no_reboot ||
 	($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
 	($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
 }
@@ -693,16 +949,29 @@
 }
 
 sub wait_for_monitor {
-    my ($time) = @_;
+    my ($time, $stop) = @_;
+    my $full_line = "";
     my $line;
+    my $booted = 0;
 
     doprint "** Wait for monitor to settle down **\n";
 
     # read the monitor and wait for the system to calm down
-    do {
+    while (!$booted) {
 	$line = wait_for_input($monitor_fp, $time);
-	print "$line" if (defined($line));
-    } while (defined($line));
+	last if (!defined($line));
+	print "$line";
+	$full_line .= $line;
+
+	if (defined($stop) && $full_line =~ /$stop/) {
+	    doprint "wait for monitor detected $stop\n";
+	    $booted = 1;
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+    }
     print "** Monitor flushed **\n";
 }
 
@@ -719,10 +988,7 @@
 	# no need to reboot for just building.
 	if (!do_not_reboot) {
 	    doprint "REBOOTING\n";
-	    reboot;
-	    start_monitor;
-	    wait_for_monitor $sleep_time;
-	    end_monitor;
+	    reboot $sleep_time;
 	}
 
 	my $name = "";
@@ -854,9 +1120,12 @@
     open(IN, "$ssh_grub |")
 	or die "unable to get menu.lst";
 
+    my $found = 0;
+
     while (<IN>) {
 	if (/^\s*title\s+$grub_menu\s*$/) {
 	    $grub_number++;
+	    $found = 1;
 	    last;
 	} elsif (/^\s*title\s/) {
 	    $grub_number++;
@@ -865,7 +1134,7 @@
     close(IN);
 
     die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
-	if ($grub_number < 0);
+	if (!$found);
     doprint "$grub_number\n";
 }
 
@@ -902,7 +1171,8 @@
 
 sub reboot_to {
     if ($reboot_type eq "grub") {
-	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
+	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+	reboot;
 	return;
     }
 
@@ -1083,6 +1353,8 @@
 
 sub install {
 
+    return if ($no_install);
+
     run_scp "$outputdir/$build_target", "$target_image" or
 	dodie "failed to copy image";
 
@@ -1140,6 +1412,11 @@
 }
 
 sub start_monitor_and_boot {
+    # Make sure the stable kernel has finished booting
+    start_monitor;
+    wait_for_monitor 5;
+    end_monitor;
+
     get_grub_index;
     get_version;
     install;
@@ -1250,6 +1527,10 @@
 
     unlink $buildlog;
 
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
     if (defined($pre_build)) {
 	my $ret = run_command $pre_build;
 	if (!$ret && defined($pre_build_die) &&
@@ -1272,16 +1553,16 @@
 	# allow for empty configs
 	run_command "touch $output_config";
 
-	run_command "mv $output_config $outputdir/config_temp" or
-	    dodie "moving .config";
+	if (!$noclean) {
+	    run_command "mv $output_config $outputdir/config_temp" or
+		dodie "moving .config";
 
-	if (!$noclean && !run_command "$make mrproper") {
-	    dodie "make mrproper";
+	    run_command "$make mrproper" or dodie "make mrproper";
+
+	    run_command "mv $outputdir/config_temp $output_config" or
+		dodie "moving config_temp";
 	}
 
-	run_command "mv $outputdir/config_temp $output_config" or
-	    dodie "moving config_temp";
-
     } elsif (!$noclean) {
 	unlink "$output_config";
 	run_command "$make mrproper" or
@@ -1318,10 +1599,15 @@
 
     if (!$build_ret) {
 	# bisect may need this to pass
-	return 0 if ($in_bisect);
+	if ($in_bisect) {
+	    $no_reboot = $save_no_reboot;
+	    return 0;
+	}
 	fail "failed build" and return 0;
     }
 
+    $no_reboot = $save_no_reboot;
+
     return 1;
 }
 
@@ -1356,10 +1642,7 @@
 
     if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
 	doprint "Reboot and wait $sleep_time seconds\n";
-	reboot;
-	start_monitor;
-	wait_for_monitor $sleep_time;
-	end_monitor;
+	reboot $sleep_time;
     }
 }
 
@@ -1500,10 +1783,7 @@
 
 sub bisect_reboot {
     doprint "Reboot and sleep $bisect_sleep_time seconds\n";
-    reboot;
-    start_monitor;
-    wait_for_monitor $bisect_sleep_time;
-    end_monitor;
+    reboot $bisect_sleep_time;
 }
 
 # returns 1 on success, 0 on failure, -1 on skip
@@ -2066,10 +2346,7 @@
 
 sub patchcheck_reboot {
     doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
-    reboot;
-    start_monitor;
-    wait_for_monitor $patchcheck_sleep_time;
-    end_monitor;
+    reboot $patchcheck_sleep_time;
 }
 
 sub patchcheck {
@@ -2178,12 +2455,31 @@
 }
 
 my %depends;
+my %depcount;
 my $iflevel = 0;
 my @ifdeps;
 
 # prevent recursion
 my %read_kconfigs;
 
+sub add_dep {
+    # $config depends on $dep
+    my ($config, $dep) = @_;
+
+    if (defined($depends{$config})) {
+	$depends{$config} .= " " . $dep;
+    } else {
+	$depends{$config} = $dep;
+    }
+
+    # record the number of configs depending on $dep
+    if (defined $depcount{$dep}) {
+	$depcount{$dep}++;
+    } else {
+	$depcount{$dep} = 1;
+    } 
+}
+
 # taken from streamline_config.pl
 sub read_kconfig {
     my ($kconfig) = @_;
@@ -2230,30 +2526,19 @@
 	    $config = $2;
 
 	    for (my $i = 0; $i < $iflevel; $i++) {
-		if ($i) {
-		    $depends{$config} .= " " . $ifdeps[$i];
-		} else {
-		    $depends{$config} = $ifdeps[$i];
-		}
-		$state = "DEP";
+		add_dep $config, $ifdeps[$i];
 	    }
 
 	# collect the depends for the config
 	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
 
-	    if (defined($depends{$1})) {
-		$depends{$config} .= " " . $1;
-	    } else {
-		$depends{$config} = $1;
-	    }
+	    add_dep $config, $1;
 
 	# Get the configs that select this config
-	} elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
-	    if (defined($depends{$1})) {
-		$depends{$1} .= " " . $config;
-	    } else {
-		$depends{$1} = $config;
-	    }
+	} elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+	    # selected by depends on config
+	    add_dep $1, $config;
 
 	# Check for if statements
 	} elsif (/^if\s+(.*\S)\s*$/) {
@@ -2365,11 +2650,18 @@
     close OUT;
 }
 
+sub chomp_config {
+    my ($config) = @_;
+
+    $config =~ s/CONFIG_//;
+
+    return $config;
+}
+
 sub get_depends {
     my ($dep) = @_;
 
-    my $kconfig = $dep;
-    $kconfig =~ s/CONFIG_//;
+    my $kconfig = chomp_config $dep;
 
     $dep = $depends{"$kconfig"};
 
@@ -2419,8 +2711,7 @@
 	return undef;
     }
 
-    my $kconfig = $config;
-    $kconfig =~ s/CONFIG_//;
+    my $kconfig = chomp_config $config;
 
     # Test dependencies first
     if (defined($depends{"$kconfig"})) {
@@ -2510,6 +2801,14 @@
 
     my @config_keys = keys %min_configs;
 
+    # All configs need a depcount
+    foreach my $config (@config_keys) {
+	my $kconfig = chomp_config $config;
+	if (!defined $depcount{$kconfig}) {
+		$depcount{$kconfig} = 0;
+	}
+    }
+
     # Remove anything that was set by the make allnoconfig
     # we shouldn't need them as they get set for us anyway.
     foreach my $config (@config_keys) {
@@ -2548,8 +2847,13 @@
 	# Now disable each config one by one and do a make oldconfig
 	# till we find a config that changes our list.
 
-	# Put configs that did not modify the config at the end.
 	my @test_configs = keys %min_configs;
+
+	# Sort keys by who is most dependent on
+	@test_configs = sort  { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+			  @test_configs ;
+
+	# Put configs that did not modify the config at the end.
 	my $reset = 1;
 	for (my $i = 0; $i < $#test_configs; $i++) {
 	    if (!defined($nochange_config{$test_configs[0]})) {
@@ -2659,10 +2963,7 @@
 	}
 
 	doprint "Reboot and wait $sleep_time seconds\n";
-	reboot;
-	start_monitor;
-	wait_for_monitor $sleep_time;
-	end_monitor;
+	reboot $sleep_time;
     }
 
     success $i;
@@ -2783,6 +3084,9 @@
 # First we need to do is the builds
 for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
+    # Do not reboot on failing test options
+    $no_reboot = 1;
+
     $iteration = $i;
 
     my $makecmd = set_test_option("MAKE_CMD", $i);
@@ -2811,6 +3115,7 @@
     $reboot_type = set_test_option("REBOOT_TYPE", $i);
     $grub_menu = set_test_option("GRUB_MENU", $i);
     $post_install = set_test_option("POST_INSTALL", $i);
+    $no_install = set_test_option("NO_INSTALL", $i);
     $reboot_script = set_test_option("REBOOT_SCRIPT", $i);
     $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
     $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
@@ -2832,6 +3137,7 @@
     $console = set_test_option("CONSOLE", $i);
     $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
     $success_line = set_test_option("SUCCESS_LINE", $i);
+    $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
     $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
     $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
     $stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
@@ -2850,9 +3156,11 @@
 
     chdir $builddir || die "can't change directory to $builddir";
 
-    if (!-d $tmpdir) {
-	mkpath($tmpdir) or
-	    die "can't create $tmpdir";
+    foreach my $dir ($tmpdir, $outputdir) {
+	if (!-d $dir) {
+	    mkpath($dir) or
+		die "can't create $dir";
+	}
     }
 
     $ENV{"SSH_USER"} = $ssh_user;
@@ -2889,8 +3197,11 @@
 	$run_type = "ERROR";
     }
 
+    my $installme = "";
+    $installme = " no_install" if ($no_install);
+
     doprint "\n\n";
-    doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+    doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
 
     unlink $dmesg;
     unlink $buildlog;
@@ -2911,6 +3222,9 @@
 	    die "failed to checkout $checkout";
     }
 
+    $no_reboot = 0;
+
+
     if ($test_type eq "bisect") {
 	bisect $i;
 	next;
@@ -2929,6 +3243,13 @@
 	build $build_type or next;
     }
 
+    if ($test_type eq "install") {
+	get_version;
+	install;
+	success $i;
+	next;
+    }
+
     if ($test_type ne "build") {
 	my $failed = 0;
 	start_monitor_and_boot or $failed = 1;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index b8bcd14..dbedfa1 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -72,6 +72,128 @@
 # the same option name under the same test or as default
 # ktest will fail to execute, and no tests will run.
 #
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+# 
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of paranthesis. Without any paranthesis the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
 
 #### Config variables ####
 #
@@ -253,9 +375,10 @@
 
 # The default test type (default test)
 # The test types may be:
-#   build - only build the kernel, do nothing else
-#   boot - build and boot the kernel
-#   test - build, boot and if TEST is set, run the test script
+#   build   - only build the kernel, do nothing else
+#   install - build and install, but do nothing else (does not reboot)
+#   boot    - build, install, and boot the kernel
+#   test    - build, boot and if TEST is set, run the test script
 #          (If TEST is not set, it defaults back to boot)
 #   bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
 #   patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
@@ -293,6 +416,13 @@
 # or on some systems:
 #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
 
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
 # If there is a script that you require to run before the build is done
 # you can specify it with PRE_BUILD.
 #
@@ -415,6 +545,14 @@
 # (default "login:")
 #SUCCESS_LINE = login:
 
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
 # In case the console constantly fills the screen, having
 # a specified time to stop the test after success is recommended.
 # (in seconds)
@@ -480,6 +618,8 @@
 # another test. If a reboot to the reliable kernel happens,
 # we wait SLEEP_TIME for the console to stop producing output
 # before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
 # (default 60)
 #SLEEP_TIME = 60