blob: ca8d2a849cff4f2b3e4efbf203fcdbc8798fb5cf [file] [log] [blame]
#ifndef _LINUX_IRQ_H
#define _LINUX_IRQ_H
/*
* Please do not include this file in generic code. There is currently
* no requirement for any architecture to implement anything held
* within this file.
*
* Thanks. --rmk
*/
#include <linux/smp.h>
#ifndef CONFIG_S390
#include <linux/linkage.h>
#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/cpumask.h>
#include <linux/irqreturn.h>
#include <asm/irq.h>
#include <asm/ptrace.h>
/*
* IRQ line status.
*/
#define IRQ_INPROGRESS 1 /* IRQ handler active - do not enter! */
#define IRQ_DISABLED 2 /* IRQ disabled - do not enter! */
#define IRQ_PENDING 4 /* IRQ pending - replay on enable */
#define IRQ_REPLAY 8 /* IRQ has been replayed but not acked yet */
#define IRQ_AUTODETECT 16 /* IRQ is being autodetected */
#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */
#define IRQ_LEVEL 64 /* IRQ level triggered */
#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */
#ifdef CONFIG_IRQ_PER_CPU
# define IRQ_PER_CPU 256 /* IRQ is per CPU */
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
#else
# define CHECK_IRQ_PER_CPU(var) 0
#endif
#define IRQ_NOPROBE 512 /* IRQ is not valid for probing */
#define IRQ_NOREQUEST 1024 /* IRQ cannot be requested */
#define IRQ_NOAUTOEN 2048 /* IRQ will not be enabled on request irq */
#define IRQ_DELAYED_DISABLE \
4096 /* IRQ disable (masking) happens delayed. */
/*
* IRQ types, see also include/linux/interrupt.h
*/
#define IRQ_TYPE_NONE 0x0000 /* Default, unspecified type */
#define IRQ_TYPE_EDGE_RISING 0x0001 /* Edge rising type */
#define IRQ_TYPE_EDGE_FALLING 0x0002 /* Edge falling type */
#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
#define IRQ_TYPE_LEVEL_HIGH 0x0004 /* Level high type */
#define IRQ_TYPE_LEVEL_LOW 0x0008 /* Level low type */
#define IRQ_TYPE_SIMPLE 0x0010 /* Simple type */
#define IRQ_TYPE_PERCPU 0x0020 /* Per CPU type */
#define IRQ_TYPE_PROBE 0x0040 /* Probing in progress */
struct proc_dir_entry;
/**
* struct irq_chip - hardware interrupt chip descriptor
*
* @name: name for /proc/interrupts
* @startup: start up the interrupt (defaults to ->enable if NULL)
* @shutdown: shut down the interrupt (defaults to ->disable if NULL)
* @enable: enable the interrupt (defaults to chip->unmask if NULL)
* @disable: disable the interrupt (defaults to chip->mask if NULL)
* @ack: start of a new interrupt
* @mask: mask an interrupt source
* @mask_ack: ack and mask an interrupt source
* @unmask: unmask an interrupt source
* @end: end of interrupt
* @set_affinity: set the CPU affinity on SMP machines
* @retrigger: resend an IRQ to the CPU
* @set_type: set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
* @set_wake: enable/disable power-management wake-on of an IRQ
*
* @release: release function solely used by UML
* @typename: obsoleted by name, kept as migration helper
*/
struct irq_chip {
const char *name;
unsigned int (*startup)(unsigned int irq);
void (*shutdown)(unsigned int irq);
void (*enable)(unsigned int irq);
void (*disable)(unsigned int irq);
void (*ack)(unsigned int irq);
void (*mask)(unsigned int irq);
void (*mask_ack)(unsigned int irq);
void (*unmask)(unsigned int irq);
void (*end)(unsigned int irq);
void (*set_affinity)(unsigned int irq, cpumask_t dest);
int (*retrigger)(unsigned int irq);
int (*set_type)(unsigned int irq, unsigned int flow_type);
int (*set_wake)(unsigned int irq, unsigned int on);
/* Currently used only by UML, might disappear one day.*/
#ifdef CONFIG_IRQ_RELEASE_METHOD
void (*release)(unsigned int irq, void *dev_id);
#endif
/*
* For compatibility, ->typename is copied into ->name.
* Will disappear.
*/
const char *typename;
};
/**
* struct irq_desc - interrupt descriptor
*
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @handler_data: per-IRQ data for the irq_chip methods
* @chip_data: platform-specific per-chip private data for the chip
* methods, to allow shared chip implementations
* @action: the irq action chain
* @status: status information
* @depth: disable-depth, for nested irq_disable() calls
* @irq_count: stats field to detect stalled irqs
* @irqs_unhandled: stats field for spurious unhandled interrupts
* @lock: locking for SMP
* @affinity: IRQ affinity on SMP
* @cpu: cpu index useful for balancing
* @pending_mask: pending rebalanced interrupts
* @move_irq: need to re-target IRQ destination
* @dir: /proc/irq/ procfs entry
* @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP
*
* Pad this out to 32 bytes for cache and indexing reasons.
*/
struct irq_desc {
void fastcall (*handle_irq)(unsigned int irq,
struct irq_desc *desc,
struct pt_regs *regs);
struct irq_chip *chip;
void *handler_data;
void *chip_data;
struct irqaction *action; /* IRQ action list */
unsigned int status; /* IRQ status */
unsigned int depth; /* nested irq disables */
unsigned int irq_count; /* For detecting broken IRQs */
unsigned int irqs_unhandled;
spinlock_t lock;
#ifdef CONFIG_SMP
cpumask_t affinity;
unsigned int cpu;
#endif
#if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
cpumask_t pending_mask;
unsigned int move_irq; /* need to re-target IRQ dest */
#endif
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *dir;
#endif
} ____cacheline_aligned;
extern struct irq_desc irq_desc[NR_IRQS];
/*
* Migration helpers for obsolete names, they will go away:
*/
#define hw_interrupt_type irq_chip
typedef struct irq_chip hw_irq_controller;
#define no_irq_type no_irq_chip
typedef struct irq_desc irq_desc_t;
/*
* Pick up the arch-dependent methods:
*/
#include <asm/hw_irq.h>
extern int setup_irq(unsigned int irq, struct irqaction *new);
#ifdef CONFIG_GENERIC_HARDIRQS
#ifdef CONFIG_SMP
static inline void set_native_irq_info(int irq, cpumask_t mask)
{
irq_desc[irq].affinity = mask;
}
#else
static inline void set_native_irq_info(int irq, cpumask_t mask)
{
}
#endif
#ifdef CONFIG_SMP
#if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
#ifdef CONFIG_PCI_MSI
/*
* Wonder why these are dummies?
* For e.g the set_ioapic_affinity_vector() calls the set_ioapic_affinity_irq()
* counter part after translating the vector to irq info. We need to perform
* this operation on the real irq, when we dont use vector, i.e when
* pci_use_vector() is false.
*/
static inline void move_irq(int irq)
{
}
static inline void set_irq_info(int irq, cpumask_t mask)
{
}
#else /* CONFIG_PCI_MSI */
static inline void move_irq(int irq)
{
move_native_irq(irq);
}
static inline void set_irq_info(int irq, cpumask_t mask)
{
set_native_irq_info(irq, mask);
}
#endif /* CONFIG_PCI_MSI */
#else /* CONFIG_GENERIC_PENDING_IRQ || CONFIG_IRQBALANCE */
static inline void move_irq(int irq)
{
}
static inline void move_native_irq(int irq)
{
}
static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
{
}
static inline void set_irq_info(int irq, cpumask_t mask)
{
set_native_irq_info(irq, mask);
}
#endif /* CONFIG_GENERIC_PENDING_IRQ */
#else /* CONFIG_SMP */
#define move_irq(x)
#define move_native_irq(x)
#endif /* CONFIG_SMP */
#ifdef CONFIG_IRQBALANCE
extern void set_balance_irq_affinity(unsigned int irq, cpumask_t mask);
#else
static inline void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
{
}
#endif
#ifdef CONFIG_AUTO_IRQ_AFFINITY
extern int select_smp_affinity(unsigned int irq);
#else
static inline int select_smp_affinity(unsigned int irq)
{
return 1;
}
#endif
extern int no_irq_affinity;
/* Handle irq action chains: */
extern int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
struct irqaction *action);
/*
* Built-in IRQ handlers for various IRQ types,
* callable via desc->chip->handle_irq()
*/
extern void fastcall
handle_level_irq(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs);
extern void fastcall
handle_fastack_irq(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs);
extern void fastcall
handle_edge_irq(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs);
extern void fastcall
handle_simple_irq(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs);
extern void fastcall
handle_percpu_irq(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs);
extern void fastcall
handle_bad_irq(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs);
/*
* Get a descriptive string for the highlevel handler, for
* /proc/interrupts output:
*/
extern const char *
handle_irq_name(void fastcall (*handle)(unsigned int, struct irq_desc *,
struct pt_regs *));
/*
* Monolithic do_IRQ implementation.
* (is an explicit fastcall, because i386 4KSTACKS calls it from assembly)
*/
extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
/*
* Architectures call this to let the generic IRQ layer
* handle an interrupt. If the descriptor is attached to an
* irqchip-style controller then we call the ->handle_irq() handler,
* and it calls __do_IRQ() if it's attached to an irqtype-style controller.
*/
static inline void generic_handle_irq(unsigned int irq, struct pt_regs *regs)
{
struct irq_desc *desc = irq_desc + irq;
if (likely(desc->handle_irq))
desc->handle_irq(irq, desc, regs);
else
__do_IRQ(irq, regs);
}
/* Handling of unhandled and spurious interrupts: */
extern void note_interrupt(unsigned int irq, struct irq_desc *desc,
int action_ret, struct pt_regs *regs);
/* Resending of interrupts :*/
void check_irq_resend(struct irq_desc *desc, unsigned int irq);
/* Initialize /proc/irq/ */
extern void init_irq_proc(void);
/* Enable/disable irq debugging output: */
extern int noirqdebug_setup(char *str);
/* Checks whether the interrupt can be requested by request_irq(): */
extern int can_request_irq(unsigned int irq, unsigned long irqflags);
/* Dummy irq-chip implementation: */
extern struct irq_chip no_irq_chip;
extern void
set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
void fastcall (*handle)(unsigned int,
struct irq_desc *,
struct pt_regs *));
extern void
__set_irq_handler(unsigned int irq,
void fastcall (*handle)(unsigned int, struct irq_desc *,
struct pt_regs *),
int is_chained);
/*
* Set a highlevel flow handler for a given IRQ:
*/
static inline void
set_irq_handler(unsigned int irq,
void fastcall (*handle)(unsigned int, struct irq_desc *,
struct pt_regs *))
{
__set_irq_handler(irq, handle, 0);
}
/*
* Set a highlevel chained flow handler for a given IRQ.
* (a chained handler is automatically enabled and set to
* IRQ_NOREQUEST and IRQ_NOPROBE)
*/
static inline void
set_irq_chained_handler(unsigned int irq,
void fastcall (*handle)(unsigned int, struct irq_desc *,
struct pt_regs *))
{
__set_irq_handler(irq, handle, 1);
}
/* Set/get chip/data for an IRQ: */
extern int set_irq_chip(unsigned int irq, struct irq_chip *chip);
extern int set_irq_data(unsigned int irq, void *data);
extern int set_irq_chip_data(unsigned int irq, void *data);
extern int set_irq_type(unsigned int irq, unsigned int type);
#define get_irq_chip(irq) (irq_desc[irq].chip)
#define get_irq_chip_data(irq) (irq_desc[irq].chip_data)
#define get_irq_data(irq) (irq_desc[irq].handler_data)
#endif /* CONFIG_GENERIC_HARDIRQS */
#endif /* !CONFIG_S390 */
#endif /* _LINUX_IRQ_H */