net/bonding: Optionally allow ethernet slaves to keep own MAC
Update the "don't change MAC of slaves" functionality added in
previous changes to be a generic option, rather than something tied to
IB devices, as it's occasionally useful for regular ethernet devices as
well.
Adds "fail_over_mac" option (which is automatically enabled for IB
slaves), applicable only to active-backup mode.
Includes documentation update.
Updates bonding driver version to 3.2.0.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 0e198dd..db80f24 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -98,6 +98,7 @@
static int arp_interval = BOND_LINK_ARP_INTERV;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
static char *arp_validate = NULL;
+static int fail_over_mac = 0;
struct bond_params bonding_defaults;
module_param(max_bonds, int, 0);
@@ -131,6 +132,8 @@
MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
module_param(arp_validate, charp, 0);
MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all");
+module_param(fail_over_mac, int, 0);
+MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC. 0 of off (default), 1 for on.");
/*----------------------------- Global variables ----------------------------*/
@@ -1100,7 +1103,7 @@
/* when bonding does not set the slave MAC address, the bond MAC
* address is the one of the active slave.
*/
- if (new_active && !bond->do_set_mac_addr)
+ if (new_active && bond->params.fail_over_mac)
memcpy(bond->dev->dev_addr, new_active->dev->dev_addr,
new_active->dev->addr_len);
if (bond->curr_active_slave &&
@@ -1367,16 +1370,16 @@
if (slave_dev->set_mac_address == NULL) {
if (bond->slave_cnt == 0) {
printk(KERN_WARNING DRV_NAME
- ": %s: Warning: The first slave device you "
- "specified does not support setting the MAC "
- "address. This bond MAC address would be that "
- "of the active slave.\n", bond_dev->name);
- bond->do_set_mac_addr = 0;
- } else if (bond->do_set_mac_addr) {
+ ": %s: Warning: The first slave device "
+ "specified does not support setting the MAC "
+ "address. Enabling the fail_over_mac option.",
+ bond_dev->name);
+ bond->params.fail_over_mac = 1;
+ } else if (!bond->params.fail_over_mac) {
printk(KERN_ERR DRV_NAME
- ": %s: Error: The slave device you specified "
- "does not support setting the MAC addres,."
- "but this bond uses this practice. \n"
+ ": %s: Error: The slave device specified "
+ "does not support setting the MAC address, "
+ "but fail_over_mac is not enabled.\n"
, bond_dev->name);
res = -EOPNOTSUPP;
goto err_undo_flags;
@@ -1401,7 +1404,7 @@
*/
memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
- if (bond->do_set_mac_addr) {
+ if (!bond->params.fail_over_mac) {
/*
* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
@@ -1637,7 +1640,7 @@
dev_close(slave_dev);
err_restore_mac:
- if (bond->do_set_mac_addr) {
+ if (!bond->params.fail_over_mac) {
memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
dev_set_mac_address(slave_dev, &addr);
@@ -1814,7 +1817,7 @@
/* close slave before restoring its mac address */
dev_close(slave_dev);
- if (bond->do_set_mac_addr) {
+ if (!bond->params.fail_over_mac) {
/* restore original ("permanent") mac address */
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
@@ -1935,7 +1938,7 @@
/* close slave before restoring its mac address */
dev_close(slave_dev);
- if (bond->do_set_mac_addr) {
+ if (!bond->params.fail_over_mac) {
/* restore original ("permanent") mac address*/
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
@@ -3060,9 +3063,15 @@
curr = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock);
- seq_printf(seq, "Bonding Mode: %s\n",
+ seq_printf(seq, "Bonding Mode: %s",
bond_mode_name(bond->params.mode));
+ if (bond->params.mode == BOND_MODE_ACTIVEBACKUP &&
+ bond->params.fail_over_mac)
+ seq_printf(seq, " (fail_over_mac)");
+
+ seq_printf(seq, "\n");
+
if (bond->params.mode == BOND_MODE_XOR ||
bond->params.mode == BOND_MODE_8023AD) {
seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
@@ -3994,8 +4003,12 @@
dprintk("bond=%p, name=%s\n", bond, (bond_dev ? bond_dev->name : "None"));
- if (!bond->do_set_mac_addr)
- return -EOPNOTSUPP;
+ /*
+ * If fail_over_mac is enabled, do nothing and return success.
+ * Returning an error causes ifenslave to fail.
+ */
+ if (bond->params.fail_over_mac)
+ return 0;
if (!is_valid_ether_addr(sa->sa_data)) {
return -EADDRNOTAVAIL;
@@ -4384,10 +4397,6 @@
#ifdef CONFIG_PROC_FS
bond_create_proc_entry(bond);
#endif
-
- /* set do_set_mac_addr to true on startup */
- bond->do_set_mac_addr = 1;
-
list_add_tail(&bond->bond_list, &bond_dev_list);
return 0;
@@ -4721,6 +4730,11 @@
primary = NULL;
}
+ if (fail_over_mac && (bond_mode != BOND_MODE_ACTIVEBACKUP))
+ printk(KERN_WARNING DRV_NAME
+ ": Warning: fail_over_mac only affects "
+ "active-backup mode.\n");
+
/* fill params struct with the proper values */
params->mode = bond_mode;
params->xmit_policy = xmit_hashtype;
@@ -4732,6 +4746,7 @@
params->use_carrier = use_carrier;
params->lacp_fast = lacp_fast;
params->primary[0] = 0;
+ params->fail_over_mac = fail_over_mac;
if (primary) {
strncpy(params->primary, primary, IFNAMSIZ);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index b5d2a13..80c0c8c4 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -568,6 +568,54 @@
static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate, bonding_store_arp_validate);
/*
+ * Show and store fail_over_mac. User only allowed to change the
+ * value when there are no slaves.
+ */
+static ssize_t bonding_show_fail_over_mac(struct device *d, struct device_attribute *attr, char *buf)
+{
+ struct bonding *bond = to_bond(d);
+
+ return sprintf(buf, "%d\n", bond->params.fail_over_mac) + 1;
+}
+
+static ssize_t bonding_store_fail_over_mac(struct device *d, struct device_attribute *attr, const char *buf, size_t count)
+{
+ int new_value;
+ int ret = count;
+ struct bonding *bond = to_bond(d);
+
+ if (bond->slave_cnt != 0) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: Can't alter fail_over_mac with slaves in bond.\n",
+ bond->dev->name);
+ ret = -EPERM;
+ goto out;
+ }
+
+ if (sscanf(buf, "%d", &new_value) != 1) {
+ printk(KERN_ERR DRV_NAME
+ ": %s: no fail_over_mac value specified.\n",
+ bond->dev->name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if ((new_value == 0) || (new_value == 1)) {
+ bond->params.fail_over_mac = new_value;
+ printk(KERN_INFO DRV_NAME ": %s: Setting fail_over_mac to %d.\n",
+ bond->dev->name, new_value);
+ } else {
+ printk(KERN_INFO DRV_NAME
+ ": %s: Ignoring invalid fail_over_mac value %d.\n",
+ bond->dev->name, new_value);
+ }
+out:
+ return ret;
+}
+
+static DEVICE_ATTR(fail_over_mac, S_IRUGO | S_IWUSR, bonding_show_fail_over_mac, bonding_store_fail_over_mac);
+
+/*
* Show and set the arp timer interval. There are two tricky bits
* here. First, if ARP monitoring is activated, then we must disable
* MII monitoring. Second, if the ARP timer isn't running, we must
@@ -1388,6 +1436,7 @@
static struct attribute *per_bond_attrs[] = {
&dev_attr_slaves.attr,
&dev_attr_mode.attr,
+ &dev_attr_fail_over_mac.attr,
&dev_attr_arp_validate.attr,
&dev_attr_arp_interval.attr,
&dev_attr_arp_ip_target.attr,
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 85e579b..a8bbd56 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -22,8 +22,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.1.3"
-#define DRV_RELDATE "June 13, 2007"
+#define DRV_VERSION "3.2.0"
+#define DRV_RELDATE "September 13, 2007"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
@@ -128,6 +128,7 @@
int arp_interval;
int arp_validate;
int use_carrier;
+ int fail_over_mac;
int updelay;
int downdelay;
int lacp_fast;
@@ -186,7 +187,6 @@
struct timer_list mii_timer;
struct timer_list arp_timer;
s8 kill_timers;
- s8 do_set_mac_addr;
s8 send_grat_arp;
s8 setup_by_slave;
struct net_device_stats stats;