| /* |
| * Driver for OHCI 1394 controllers |
| * |
| * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/bug.h> |
| #include <linux/compiler.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/firewire.h> |
| #include <linux/firewire-constants.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/time.h> |
| #include <linux/vmalloc.h> |
| #include <linux/workqueue.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/page.h> |
| |
| #ifdef CONFIG_PPC_PMAC |
| #include <asm/pmac_feature.h> |
| #endif |
| |
| #include "core.h" |
| #include "ohci.h" |
| |
| #define ohci_info(ohci, f, args...) dev_info(ohci->card.device, f, ##args) |
| #define ohci_notice(ohci, f, args...) dev_notice(ohci->card.device, f, ##args) |
| #define ohci_err(ohci, f, args...) dev_err(ohci->card.device, f, ##args) |
| |
| #define DESCRIPTOR_OUTPUT_MORE 0 |
| #define DESCRIPTOR_OUTPUT_LAST (1 << 12) |
| #define DESCRIPTOR_INPUT_MORE (2 << 12) |
| #define DESCRIPTOR_INPUT_LAST (3 << 12) |
| #define DESCRIPTOR_STATUS (1 << 11) |
| #define DESCRIPTOR_KEY_IMMEDIATE (2 << 8) |
| #define DESCRIPTOR_PING (1 << 7) |
| #define DESCRIPTOR_YY (1 << 6) |
| #define DESCRIPTOR_NO_IRQ (0 << 4) |
| #define DESCRIPTOR_IRQ_ERROR (1 << 4) |
| #define DESCRIPTOR_IRQ_ALWAYS (3 << 4) |
| #define DESCRIPTOR_BRANCH_ALWAYS (3 << 2) |
| #define DESCRIPTOR_WAIT (3 << 0) |
| |
| #define DESCRIPTOR_CMD (0xf << 12) |
| |
| struct descriptor { |
| __le16 req_count; |
| __le16 control; |
| __le32 data_address; |
| __le32 branch_address; |
| __le16 res_count; |
| __le16 transfer_status; |
| } __attribute__((aligned(16))); |
| |
| #define CONTROL_SET(regs) (regs) |
| #define CONTROL_CLEAR(regs) ((regs) + 4) |
| #define COMMAND_PTR(regs) ((regs) + 12) |
| #define CONTEXT_MATCH(regs) ((regs) + 16) |
| |
| #define AR_BUFFER_SIZE (32*1024) |
| #define AR_BUFFERS_MIN DIV_ROUND_UP(AR_BUFFER_SIZE, PAGE_SIZE) |
| /* we need at least two pages for proper list management */ |
| #define AR_BUFFERS (AR_BUFFERS_MIN >= 2 ? AR_BUFFERS_MIN : 2) |
| |
| #define MAX_ASYNC_PAYLOAD 4096 |
| #define MAX_AR_PACKET_SIZE (16 + MAX_ASYNC_PAYLOAD + 4) |
| #define AR_WRAPAROUND_PAGES DIV_ROUND_UP(MAX_AR_PACKET_SIZE, PAGE_SIZE) |
| |
| struct ar_context { |
| struct fw_ohci *ohci; |
| struct page *pages[AR_BUFFERS]; |
| void *buffer; |
| struct descriptor *descriptors; |
| dma_addr_t descriptors_bus; |
| void *pointer; |
| unsigned int last_buffer_index; |
| u32 regs; |
| struct tasklet_struct tasklet; |
| }; |
| |
| struct context; |
| |
| typedef int (*descriptor_callback_t)(struct context *ctx, |
| struct descriptor *d, |
| struct descriptor *last); |
| |
| /* |
| * A buffer that contains a block of DMA-able coherent memory used for |
| * storing a portion of a DMA descriptor program. |
| */ |
| struct descriptor_buffer { |
| struct list_head list; |
| dma_addr_t buffer_bus; |
| size_t buffer_size; |
| size_t used; |
| struct descriptor buffer[0]; |
| }; |
| |
| struct context { |
| struct fw_ohci *ohci; |
| u32 regs; |
| int total_allocation; |
| u32 current_bus; |
| bool running; |
| bool flushing; |
| |
| /* |
| * List of page-sized buffers for storing DMA descriptors. |
| * Head of list contains buffers in use and tail of list contains |
| * free buffers. |
| */ |
| struct list_head buffer_list; |
| |
| /* |
| * Pointer to a buffer inside buffer_list that contains the tail |
| * end of the current DMA program. |
| */ |
| struct descriptor_buffer *buffer_tail; |
| |
| /* |
| * The descriptor containing the branch address of the first |
| * descriptor that has not yet been filled by the device. |
| */ |
| struct descriptor *last; |
| |
| /* |
| * The last descriptor block in the DMA program. It contains the branch |
| * address that must be updated upon appending a new descriptor. |
| */ |
| struct descriptor *prev; |
| int prev_z; |
| |
| descriptor_callback_t callback; |
| |
| struct tasklet_struct tasklet; |
| }; |
| |
| #define IT_HEADER_SY(v) ((v) << 0) |
| #define IT_HEADER_TCODE(v) ((v) << 4) |
| #define IT_HEADER_CHANNEL(v) ((v) << 8) |
| #define IT_HEADER_TAG(v) ((v) << 14) |
| #define IT_HEADER_SPEED(v) ((v) << 16) |
| #define IT_HEADER_DATA_LENGTH(v) ((v) << 16) |
| |
| struct iso_context { |
| struct fw_iso_context base; |
| struct context context; |
| void *header; |
| size_t header_length; |
| unsigned long flushing_completions; |
| u32 mc_buffer_bus; |
| u16 mc_completed; |
| u16 last_timestamp; |
| u8 sync; |
| u8 tags; |
| }; |
| |
| #define CONFIG_ROM_SIZE 1024 |
| |
| struct fw_ohci { |
| struct fw_card card; |
| |
| __iomem char *registers; |
| int node_id; |
| int generation; |
| int request_generation; /* for timestamping incoming requests */ |
| unsigned quirks; |
| unsigned int pri_req_max; |
| u32 bus_time; |
| bool bus_time_running; |
| bool is_root; |
| bool csr_state_setclear_abdicate; |
| int n_ir; |
| int n_it; |
| /* |
| * Spinlock for accessing fw_ohci data. Never call out of |
| * this driver with this lock held. |
| */ |
| spinlock_t lock; |
| |
| struct mutex phy_reg_mutex; |
| |
| void *misc_buffer; |
| dma_addr_t misc_buffer_bus; |
| |
| struct ar_context ar_request_ctx; |
| struct ar_context ar_response_ctx; |
| struct context at_request_ctx; |
| struct context at_response_ctx; |
| |
| u32 it_context_support; |
| u32 it_context_mask; /* unoccupied IT contexts */ |
| struct iso_context *it_context_list; |
| u64 ir_context_channels; /* unoccupied channels */ |
| u32 ir_context_support; |
| u32 ir_context_mask; /* unoccupied IR contexts */ |
| struct iso_context *ir_context_list; |
| u64 mc_channels; /* channels in use by the multichannel IR context */ |
| bool mc_allocated; |
| |
| __be32 *config_rom; |
| dma_addr_t config_rom_bus; |
| __be32 *next_config_rom; |
| dma_addr_t next_config_rom_bus; |
| __be32 next_header; |
| |
| __le32 *self_id; |
| dma_addr_t self_id_bus; |
| struct work_struct bus_reset_work; |
| |
| u32 self_id_buffer[512]; |
| }; |
| |
| static struct workqueue_struct *selfid_workqueue; |
| |
| static inline struct fw_ohci *fw_ohci(struct fw_card *card) |
| { |
| return container_of(card, struct fw_ohci, card); |
| } |
| |
| #define IT_CONTEXT_CYCLE_MATCH_ENABLE 0x80000000 |
| #define IR_CONTEXT_BUFFER_FILL 0x80000000 |
| #define IR_CONTEXT_ISOCH_HEADER 0x40000000 |
| #define IR_CONTEXT_CYCLE_MATCH_ENABLE 0x20000000 |
| #define IR_CONTEXT_MULTI_CHANNEL_MODE 0x10000000 |
| #define IR_CONTEXT_DUAL_BUFFER_MODE 0x08000000 |
| |
| #define CONTEXT_RUN 0x8000 |
| #define CONTEXT_WAKE 0x1000 |
| #define CONTEXT_DEAD 0x0800 |
| #define CONTEXT_ACTIVE 0x0400 |
| |
| #define OHCI1394_MAX_AT_REQ_RETRIES 0xf |
| #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 |
| #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 |
| |
| #define OHCI1394_REGISTER_SIZE 0x800 |
| #define OHCI1394_PCI_HCI_Control 0x40 |
| #define SELF_ID_BUF_SIZE 0x800 |
| #define OHCI_TCODE_PHY_PACKET 0x0e |
| #define OHCI_VERSION_1_1 0x010010 |
| |
| static char ohci_driver_name[] = KBUILD_MODNAME; |
| |
| #define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd |
| #define PCI_DEVICE_ID_AGERE_FW643 0x5901 |
| #define PCI_DEVICE_ID_CREATIVE_SB1394 0x4001 |
| #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380 |
| #define PCI_DEVICE_ID_TI_TSB12LV22 0x8009 |
| #define PCI_DEVICE_ID_TI_TSB12LV26 0x8020 |
| #define PCI_DEVICE_ID_TI_TSB82AA2 0x8025 |
| #define PCI_DEVICE_ID_VIA_VT630X 0x3044 |
| #define PCI_REV_ID_VIA_VT6306 0x46 |
| #define PCI_DEVICE_ID_VIA_VT6315 0x3403 |
| |
| #define QUIRK_CYCLE_TIMER 0x1 |
| #define QUIRK_RESET_PACKET 0x2 |
| #define QUIRK_BE_HEADERS 0x4 |
| #define QUIRK_NO_1394A 0x8 |
| #define QUIRK_NO_MSI 0x10 |
| #define QUIRK_TI_SLLZ059 0x20 |
| #define QUIRK_IR_WAKE 0x40 |
| |
| /* In case of multiple matches in ohci_quirks[], only the first one is used. */ |
| static const struct { |
| unsigned short vendor, device, revision, flags; |
| } ohci_quirks[] = { |
| {PCI_VENDOR_ID_AL, PCI_ANY_ID, PCI_ANY_ID, |
| QUIRK_CYCLE_TIMER}, |
| |
| {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, PCI_ANY_ID, |
| QUIRK_BE_HEADERS}, |
| |
| {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6, |
| QUIRK_NO_MSI}, |
| |
| {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID, |
| QUIRK_RESET_PACKET}, |
| |
| {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID, |
| QUIRK_NO_MSI}, |
| |
| {PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID, |
| QUIRK_CYCLE_TIMER}, |
| |
| {PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID, |
| QUIRK_NO_MSI}, |
| |
| {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID, |
| QUIRK_CYCLE_TIMER | QUIRK_NO_MSI}, |
| |
| {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID, |
| QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A}, |
| |
| {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV26, PCI_ANY_ID, |
| QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059}, |
| |
| {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB82AA2, PCI_ANY_ID, |
| QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059}, |
| |
| {PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID, |
| QUIRK_RESET_PACKET}, |
| |
| {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT630X, PCI_REV_ID_VIA_VT6306, |
| QUIRK_CYCLE_TIMER | QUIRK_IR_WAKE}, |
| |
| {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT6315, 0, |
| QUIRK_CYCLE_TIMER /* FIXME: necessary? */ | QUIRK_NO_MSI}, |
| |
| {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT6315, PCI_ANY_ID, |
| QUIRK_NO_MSI}, |
| |
| {PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_ANY_ID, |
| QUIRK_CYCLE_TIMER | QUIRK_NO_MSI}, |
| }; |
| |
| /* This overrides anything that was found in ohci_quirks[]. */ |
| static int param_quirks; |
| module_param_named(quirks, param_quirks, int, 0644); |
| MODULE_PARM_DESC(quirks, "Chip quirks (default = 0" |
| ", nonatomic cycle timer = " __stringify(QUIRK_CYCLE_TIMER) |
| ", reset packet generation = " __stringify(QUIRK_RESET_PACKET) |
| ", AR/selfID endianness = " __stringify(QUIRK_BE_HEADERS) |
| ", no 1394a enhancements = " __stringify(QUIRK_NO_1394A) |
| ", disable MSI = " __stringify(QUIRK_NO_MSI) |
| ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059) |
| ", IR wake unreliable = " __stringify(QUIRK_IR_WAKE) |
| ")"); |
| |
| #define OHCI_PARAM_DEBUG_AT_AR 1 |
| #define OHCI_PARAM_DEBUG_SELFIDS 2 |
| #define OHCI_PARAM_DEBUG_IRQS 4 |
| #define OHCI_PARAM_DEBUG_BUSRESETS 8 /* only effective before chip init */ |
| |
| static int param_debug; |
| module_param_named(debug, param_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Verbose logging (default = 0" |
| ", AT/AR events = " __stringify(OHCI_PARAM_DEBUG_AT_AR) |
| ", self-IDs = " __stringify(OHCI_PARAM_DEBUG_SELFIDS) |
| ", IRQs = " __stringify(OHCI_PARAM_DEBUG_IRQS) |
| ", busReset events = " __stringify(OHCI_PARAM_DEBUG_BUSRESETS) |
| ", or a combination, or all = -1)"); |
| |
| static bool param_remote_dma; |
| module_param_named(remote_dma, param_remote_dma, bool, 0444); |
| MODULE_PARM_DESC(remote_dma, "Enable unfiltered remote DMA (default = N)"); |
| |
| static void log_irqs(struct fw_ohci *ohci, u32 evt) |
| { |
| if (likely(!(param_debug & |
| (OHCI_PARAM_DEBUG_IRQS | OHCI_PARAM_DEBUG_BUSRESETS)))) |
| return; |
| |
| if (!(param_debug & OHCI_PARAM_DEBUG_IRQS) && |
| !(evt & OHCI1394_busReset)) |
| return; |
| |
| ohci_notice(ohci, "IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, |
| evt & OHCI1394_selfIDComplete ? " selfID" : "", |
| evt & OHCI1394_RQPkt ? " AR_req" : "", |
| evt & OHCI1394_RSPkt ? " AR_resp" : "", |
| evt & OHCI1394_reqTxComplete ? " AT_req" : "", |
| evt & OHCI1394_respTxComplete ? " AT_resp" : "", |
| evt & OHCI1394_isochRx ? " IR" : "", |
| evt & OHCI1394_isochTx ? " IT" : "", |
| evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", |
| evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", |
| evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", |
| evt & OHCI1394_cycleInconsistent ? " cycleInconsistent" : "", |
| evt & OHCI1394_regAccessFail ? " regAccessFail" : "", |
| evt & OHCI1394_unrecoverableError ? " unrecoverableError" : "", |
| evt & OHCI1394_busReset ? " busReset" : "", |
| evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | |
| OHCI1394_RSPkt | OHCI1394_reqTxComplete | |
| OHCI1394_respTxComplete | OHCI1394_isochRx | |
| OHCI1394_isochTx | OHCI1394_postedWriteErr | |
| OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | |
| OHCI1394_cycleInconsistent | |
| OHCI1394_regAccessFail | OHCI1394_busReset) |
| ? " ?" : ""); |
| } |
| |
| static const char *speed[] = { |
| [0] = "S100", [1] = "S200", [2] = "S400", [3] = "beta", |
| }; |
| static const char *power[] = { |
| [0] = "+0W", [1] = "+15W", [2] = "+30W", [3] = "+45W", |
| [4] = "-3W", [5] = " ?W", [6] = "-3..-6W", [7] = "-3..-10W", |
| }; |
| static const char port[] = { '.', '-', 'p', 'c', }; |
| |
| static char _p(u32 *s, int shift) |
| { |
| return port[*s >> shift & 3]; |
| } |
| |
| static void log_selfids(struct fw_ohci *ohci, int generation, int self_id_count) |
| { |
| u32 *s; |
| |
| if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS))) |
| return; |
| |
| ohci_notice(ohci, "%d selfIDs, generation %d, local node ID %04x\n", |
| self_id_count, generation, ohci->node_id); |
| |
| for (s = ohci->self_id_buffer; self_id_count--; ++s) |
| if ((*s & 1 << 23) == 0) |
| ohci_notice(ohci, |
| "selfID 0: %08x, phy %d [%c%c%c] %s gc=%d %s %s%s%s\n", |
| *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), |
| speed[*s >> 14 & 3], *s >> 16 & 63, |
| power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", |
| *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); |
| else |
| ohci_notice(ohci, |
| "selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n", |
| *s, *s >> 24 & 63, |
| _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), |
| _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); |
| } |
| |
| static const char *evts[] = { |
| [0x00] = "evt_no_status", [0x01] = "-reserved-", |
| [0x02] = "evt_long_packet", [0x03] = "evt_missing_ack", |
| [0x04] = "evt_underrun", [0x05] = "evt_overrun", |
| [0x06] = "evt_descriptor_read", [0x07] = "evt_data_read", |
| [0x08] = "evt_data_write", [0x09] = "evt_bus_reset", |
| [0x0a] = "evt_timeout", [0x0b] = "evt_tcode_err", |
| [0x0c] = "-reserved-", [0x0d] = "-reserved-", |
| [0x0e] = "evt_unknown", [0x0f] = "evt_flushed", |
| [0x10] = "-reserved-", [0x11] = "ack_complete", |
| [0x12] = "ack_pending ", [0x13] = "-reserved-", |
| [0x14] = "ack_busy_X", [0x15] = "ack_busy_A", |
| [0x16] = "ack_busy_B", [0x17] = "-reserved-", |
| [0x18] = "-reserved-", [0x19] = "-reserved-", |
| [0x1a] = "-reserved-", [0x1b] = "ack_tardy", |
| [0x1c] = "-reserved-", [0x1d] = "ack_data_error", |
| [0x1e] = "ack_type_error", [0x1f] = "-reserved-", |
| [0x20] = "pending/cancelled", |
| }; |
| static const char *tcodes[] = { |
| [0x0] = "QW req", [0x1] = "BW req", |
| [0x2] = "W resp", [0x3] = "-reserved-", |
| [0x4] = "QR req", [0x5] = "BR req", |
| [0x6] = "QR resp", [0x7] = "BR resp", |
| [0x8] = "cycle start", [0x9] = "Lk req", |
| [0xa] = "async stream packet", [0xb] = "Lk resp", |
| [0xc] = "-reserved-", [0xd] = "-reserved-", |
| [0xe] = "link internal", [0xf] = "-reserved-", |
| }; |
| |
| static void log_ar_at_event(struct fw_ohci *ohci, |
| char dir, int speed, u32 *header, int evt) |
| { |
| int tcode = header[0] >> 4 & 0xf; |
| char specific[12]; |
| |
| if (likely(!(param_debug & OHCI_PARAM_DEBUG_AT_AR))) |
| return; |
| |
| if (unlikely(evt >= ARRAY_SIZE(evts))) |
| evt = 0x1f; |
| |
| if (evt == OHCI1394_evt_bus_reset) { |
| ohci_notice(ohci, "A%c evt_bus_reset, generation %d\n", |
| dir, (header[2] >> 16) & 0xff); |
| return; |
| } |
| |
| switch (tcode) { |
| case 0x0: case 0x6: case 0x8: |
| snprintf(specific, sizeof(specific), " = %08x", |
| be32_to_cpu((__force __be32)header[3])); |
| break; |
| case 0x1: case 0x5: case 0x7: case 0x9: case 0xb: |
| snprintf(specific, sizeof(specific), " %x,%x", |
| header[3] >> 16, header[3] & 0xffff); |
| break; |
| default: |
| specific[0] = '\0'; |
| } |
| |
| switch (tcode) { |
| case 0xa: |
| ohci_notice(ohci, "A%c %s, %s\n", |
| dir, evts[evt], tcodes[tcode]); |
| break; |
| case 0xe: |
| ohci_notice(ohci, "A%c %s, PHY %08x %08x\n", |
| dir, evts[evt], header[1], header[2]); |
| break; |
| case 0x0: case 0x1: case 0x4: case 0x5: case 0x9: |
| ohci_notice(ohci, |
| "A%c spd %x tl %02x, %04x -> %04x, %s, %s, %04x%08x%s\n", |
| dir, speed, header[0] >> 10 & 0x3f, |
| header[1] >> 16, header[0] >> 16, evts[evt], |
| tcodes[tcode], header[1] & 0xffff, header[2], specific); |
| break; |
| default: |
| ohci_notice(ohci, |
| "A%c spd %x tl %02x, %04x -> %04x, %s, %s%s\n", |
| dir, speed, header[0] >> 10 & 0x3f, |
| header[1] >> 16, header[0] >> 16, evts[evt], |
| tcodes[tcode], specific); |
| } |
| } |
| |
| static inline void reg_write(const struct fw_ohci *ohci, int offset, u32 data) |
| { |
| writel(data, ohci->registers + offset); |
| } |
| |
| static inline u32 reg_read(const struct fw_ohci *ohci, int offset) |
| { |
| return readl(ohci->registers + offset); |
| } |
| |
| static inline void flush_writes(const struct fw_ohci *ohci) |
| { |
| /* Do a dummy read to flush writes. */ |
| reg_read(ohci, OHCI1394_Version); |
| } |
| |
| /* |
| * Beware! read_phy_reg(), write_phy_reg(), update_phy_reg(), and |
| * read_paged_phy_reg() require the caller to hold ohci->phy_reg_mutex. |
| * In other words, only use ohci_read_phy_reg() and ohci_update_phy_reg() |
| * directly. Exceptions are intrinsically serialized contexts like pci_probe. |
| */ |
| static int read_phy_reg(struct fw_ohci *ohci, int addr) |
| { |
| u32 val; |
| int i; |
| |
| reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr)); |
| for (i = 0; i < 3 + 100; i++) { |
| val = reg_read(ohci, OHCI1394_PhyControl); |
| if (!~val) |
| return -ENODEV; /* Card was ejected. */ |
| |
| if (val & OHCI1394_PhyControl_ReadDone) |
| return OHCI1394_PhyControl_ReadData(val); |
| |
| /* |
| * Try a few times without waiting. Sleeping is necessary |
| * only when the link/PHY interface is busy. |
| */ |
| if (i >= 3) |
| msleep(1); |
| } |
| ohci_err(ohci, "failed to read phy reg %d\n", addr); |
| dump_stack(); |
| |
| return -EBUSY; |
| } |
| |
| static int write_phy_reg(const struct fw_ohci *ohci, int addr, u32 val) |
| { |
| int i; |
| |
| reg_write(ohci, OHCI1394_PhyControl, |
| OHCI1394_PhyControl_Write(addr, val)); |
| for (i = 0; i < 3 + 100; i++) { |
| val = reg_read(ohci, OHCI1394_PhyControl); |
| if (!~val) |
| return -ENODEV; /* Card was ejected. */ |
| |
| if (!(val & OHCI1394_PhyControl_WritePending)) |
| return 0; |
| |
| if (i >= 3) |
| msleep(1); |
| } |
| ohci_err(ohci, "failed to write phy reg %d, val %u\n", addr, val); |
| dump_stack(); |
| |
| return -EBUSY; |
| } |
| |
| static int update_phy_reg(struct fw_ohci *ohci, int addr, |
| int clear_bits, int set_bits) |
| { |
| int ret = read_phy_reg(ohci, addr); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * The interrupt status bits are cleared by writing a one bit. |
| * Avoid clearing them unless explicitly requested in set_bits. |
| */ |
| if (addr == 5) |
| clear_bits |= PHY_INT_STATUS_BITS; |
| |
| return write_phy_reg(ohci, addr, (ret & ~clear_bits) | set_bits); |
| } |
| |
| static int read_paged_phy_reg(struct fw_ohci *ohci, int page, int addr) |
| { |
| int ret; |
| |
| ret = update_phy_reg(ohci, 7, PHY_PAGE_SELECT, page << 5); |
| if (ret < 0) |
| return ret; |
| |
| return read_phy_reg(ohci, addr); |
| } |
| |
| static int ohci_read_phy_reg(struct fw_card *card, int addr) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| int ret; |
| |
| mutex_lock(&ohci->phy_reg_mutex); |
| ret = read_phy_reg(ohci, addr); |
| mutex_unlock(&ohci->phy_reg_mutex); |
| |
| return ret; |
| } |
| |
| static int ohci_update_phy_reg(struct fw_card *card, int addr, |
| int clear_bits, int set_bits) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| int ret; |
| |
| mutex_lock(&ohci->phy_reg_mutex); |
| ret = update_phy_reg(ohci, addr, clear_bits, set_bits); |
| mutex_unlock(&ohci->phy_reg_mutex); |
| |
| return ret; |
| } |
| |
| static inline dma_addr_t ar_buffer_bus(struct ar_context *ctx, unsigned int i) |
| { |
| return page_private(ctx->pages[i]); |
| } |
| |
| static void ar_context_link_page(struct ar_context *ctx, unsigned int index) |
| { |
| struct descriptor *d; |
| |
| d = &ctx->descriptors[index]; |
| d->branch_address &= cpu_to_le32(~0xf); |
| d->res_count = cpu_to_le16(PAGE_SIZE); |
| d->transfer_status = 0; |
| |
| wmb(); /* finish init of new descriptors before branch_address update */ |
| d = &ctx->descriptors[ctx->last_buffer_index]; |
| d->branch_address |= cpu_to_le32(1); |
| |
| ctx->last_buffer_index = index; |
| |
| reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE); |
| } |
| |
| static void ar_context_release(struct ar_context *ctx) |
| { |
| unsigned int i; |
| |
| vunmap(ctx->buffer); |
| |
| for (i = 0; i < AR_BUFFERS; i++) |
| if (ctx->pages[i]) { |
| dma_unmap_page(ctx->ohci->card.device, |
| ar_buffer_bus(ctx, i), |
| PAGE_SIZE, DMA_FROM_DEVICE); |
| __free_page(ctx->pages[i]); |
| } |
| } |
| |
| static void ar_context_abort(struct ar_context *ctx, const char *error_msg) |
| { |
| struct fw_ohci *ohci = ctx->ohci; |
| |
| if (reg_read(ohci, CONTROL_CLEAR(ctx->regs)) & CONTEXT_RUN) { |
| reg_write(ohci, CONTROL_CLEAR(ctx->regs), CONTEXT_RUN); |
| flush_writes(ohci); |
| |
| ohci_err(ohci, "AR error: %s; DMA stopped\n", error_msg); |
| } |
| /* FIXME: restart? */ |
| } |
| |
| static inline unsigned int ar_next_buffer_index(unsigned int index) |
| { |
| return (index + 1) % AR_BUFFERS; |
| } |
| |
| static inline unsigned int ar_prev_buffer_index(unsigned int index) |
| { |
| return (index - 1 + AR_BUFFERS) % AR_BUFFERS; |
| } |
| |
| static inline unsigned int ar_first_buffer_index(struct ar_context *ctx) |
| { |
| return ar_next_buffer_index(ctx->last_buffer_index); |
| } |
| |
| /* |
| * We search for the buffer that contains the last AR packet DMA data written |
| * by the controller. |
| */ |
| static unsigned int ar_search_last_active_buffer(struct ar_context *ctx, |
| unsigned int *buffer_offset) |
| { |
| unsigned int i, next_i, last = ctx->last_buffer_index; |
| __le16 res_count, next_res_count; |
| |
| i = ar_first_buffer_index(ctx); |
| res_count = ACCESS_ONCE(ctx->descriptors[i].res_count); |
| |
| /* A buffer that is not yet completely filled must be the last one. */ |
| while (i != last && res_count == 0) { |
| |
| /* Peek at the next descriptor. */ |
| next_i = ar_next_buffer_index(i); |
| rmb(); /* read descriptors in order */ |
| next_res_count = ACCESS_ONCE( |
| ctx->descriptors[next_i].res_count); |
| /* |
| * If the next descriptor is still empty, we must stop at this |
| * descriptor. |
| */ |
| if (next_res_count == cpu_to_le16(PAGE_SIZE)) { |
| /* |
| * The exception is when the DMA data for one packet is |
| * split over three buffers; in this case, the middle |
| * buffer's descriptor might be never updated by the |
| * controller and look still empty, and we have to peek |
| * at the third one. |
| */ |
| if (MAX_AR_PACKET_SIZE > PAGE_SIZE && i != last) { |
| next_i = ar_next_buffer_index(next_i); |
| rmb(); |
| next_res_count = ACCESS_ONCE( |
| ctx->descriptors[next_i].res_count); |
| if (next_res_count != cpu_to_le16(PAGE_SIZE)) |
| goto next_buffer_is_active; |
| } |
| |
| break; |
| } |
| |
| next_buffer_is_active: |
| i = next_i; |
| res_count = next_res_count; |
| } |
| |
| rmb(); /* read res_count before the DMA data */ |
| |
| *buffer_offset = PAGE_SIZE - le16_to_cpu(res_count); |
| if (*buffer_offset > PAGE_SIZE) { |
| *buffer_offset = 0; |
| ar_context_abort(ctx, "corrupted descriptor"); |
| } |
| |
| return i; |
| } |
| |
| static void ar_sync_buffers_for_cpu(struct ar_context *ctx, |
| unsigned int end_buffer_index, |
| unsigned int end_buffer_offset) |
| { |
| unsigned int i; |
| |
| i = ar_first_buffer_index(ctx); |
| while (i != end_buffer_index) { |
| dma_sync_single_for_cpu(ctx->ohci->card.device, |
| ar_buffer_bus(ctx, i), |
| PAGE_SIZE, DMA_FROM_DEVICE); |
| i = ar_next_buffer_index(i); |
| } |
| if (end_buffer_offset > 0) |
| dma_sync_single_for_cpu(ctx->ohci->card.device, |
| ar_buffer_bus(ctx, i), |
| end_buffer_offset, DMA_FROM_DEVICE); |
| } |
| |
| #if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) |
| #define cond_le32_to_cpu(v) \ |
| (ohci->quirks & QUIRK_BE_HEADERS ? (__force __u32)(v) : le32_to_cpu(v)) |
| #else |
| #define cond_le32_to_cpu(v) le32_to_cpu(v) |
| #endif |
| |
| static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) |
| { |
| struct fw_ohci *ohci = ctx->ohci; |
| struct fw_packet p; |
| u32 status, length, tcode; |
| int evt; |
| |
| p.header[0] = cond_le32_to_cpu(buffer[0]); |
| p.header[1] = cond_le32_to_cpu(buffer[1]); |
| p.header[2] = cond_le32_to_cpu(buffer[2]); |
| |
| tcode = (p.header[0] >> 4) & 0x0f; |
| switch (tcode) { |
| case TCODE_WRITE_QUADLET_REQUEST: |
| case TCODE_READ_QUADLET_RESPONSE: |
| p.header[3] = (__force __u32) buffer[3]; |
| p.header_length = 16; |
| p.payload_length = 0; |
| break; |
| |
| case TCODE_READ_BLOCK_REQUEST : |
| p.header[3] = cond_le32_to_cpu(buffer[3]); |
| p.header_length = 16; |
| p.payload_length = 0; |
| break; |
| |
| case TCODE_WRITE_BLOCK_REQUEST: |
| case TCODE_READ_BLOCK_RESPONSE: |
| case TCODE_LOCK_REQUEST: |
| case TCODE_LOCK_RESPONSE: |
| p.header[3] = cond_le32_to_cpu(buffer[3]); |
| p.header_length = 16; |
| p.payload_length = p.header[3] >> 16; |
| if (p.payload_length > MAX_ASYNC_PAYLOAD) { |
| ar_context_abort(ctx, "invalid packet length"); |
| return NULL; |
| } |
| break; |
| |
| case TCODE_WRITE_RESPONSE: |
| case TCODE_READ_QUADLET_REQUEST: |
| case OHCI_TCODE_PHY_PACKET: |
| p.header_length = 12; |
| p.payload_length = 0; |
| break; |
| |
| default: |
| ar_context_abort(ctx, "invalid tcode"); |
| return NULL; |
| } |
| |
| p.payload = (void *) buffer + p.header_length; |
| |
| /* FIXME: What to do about evt_* errors? */ |
| length = (p.header_length + p.payload_length + 3) / 4; |
| status = cond_le32_to_cpu(buffer[length]); |
| evt = (status >> 16) & 0x1f; |
| |
| p.ack = evt - 16; |
| p.speed = (status >> 21) & 0x7; |
| p.timestamp = status & 0xffff; |
| p.generation = ohci->request_generation; |
| |
| log_ar_at_event(ohci, 'R', p.speed, p.header, evt); |
| |
| /* |
| * Several controllers, notably from NEC and VIA, forget to |
| * write ack_complete status at PHY packet reception. |
| */ |
| if (evt == OHCI1394_evt_no_status && |
| (p.header[0] & 0xff) == (OHCI1394_phy_tcode << 4)) |
| p.ack = ACK_COMPLETE; |
| |
| /* |
| * The OHCI bus reset handler synthesizes a PHY packet with |
| * the new generation number when a bus reset happens (see |
| * section 8.4.2.3). This helps us determine when a request |
| * was received and make sure we send the response in the same |
| * generation. We only need this for requests; for responses |
| * we use the unique tlabel for finding the matching |
| * request. |
| * |
| * Alas some chips sometimes emit bus reset packets with a |
| * wrong generation. We set the correct generation for these |
| * at a slightly incorrect time (in bus_reset_work). |
| */ |
| if (evt == OHCI1394_evt_bus_reset) { |
| if (!(ohci->quirks & QUIRK_RESET_PACKET)) |
| ohci->request_generation = (p.header[2] >> 16) & 0xff; |
| } else if (ctx == &ohci->ar_request_ctx) { |
| fw_core_handle_request(&ohci->card, &p); |
| } else { |
| fw_core_handle_response(&ohci->card, &p); |
| } |
| |
| return buffer + length + 1; |
| } |
| |
| static void *handle_ar_packets(struct ar_context *ctx, void *p, void *end) |
| { |
| void *next; |
| |
| while (p < end) { |
| next = handle_ar_packet(ctx, p); |
| if (!next) |
| return p; |
| p = next; |
| } |
| |
| return p; |
| } |
| |
| static void ar_recycle_buffers(struct ar_context *ctx, unsigned int end_buffer) |
| { |
| unsigned int i; |
| |
| i = ar_first_buffer_index(ctx); |
| while (i != end_buffer) { |
| dma_sync_single_for_device(ctx->ohci->card.device, |
| ar_buffer_bus(ctx, i), |
| PAGE_SIZE, DMA_FROM_DEVICE); |
| ar_context_link_page(ctx, i); |
| i = ar_next_buffer_index(i); |
| } |
| } |
| |
| static void ar_context_tasklet(unsigned long data) |
| { |
| struct ar_context *ctx = (struct ar_context *)data; |
| unsigned int end_buffer_index, end_buffer_offset; |
| void *p, *end; |
| |
| p = ctx->pointer; |
| if (!p) |
| return; |
| |
| end_buffer_index = ar_search_last_active_buffer(ctx, |
| &end_buffer_offset); |
| ar_sync_buffers_for_cpu(ctx, end_buffer_index, end_buffer_offset); |
| end = ctx->buffer + end_buffer_index * PAGE_SIZE + end_buffer_offset; |
| |
| if (end_buffer_index < ar_first_buffer_index(ctx)) { |
| /* |
| * The filled part of the overall buffer wraps around; handle |
| * all packets up to the buffer end here. If the last packet |
| * wraps around, its tail will be visible after the buffer end |
| * because the buffer start pages are mapped there again. |
| */ |
| void *buffer_end = ctx->buffer + AR_BUFFERS * PAGE_SIZE; |
| p = handle_ar_packets(ctx, p, buffer_end); |
| if (p < buffer_end) |
| goto error; |
| /* adjust p to point back into the actual buffer */ |
| p -= AR_BUFFERS * PAGE_SIZE; |
| } |
| |
| p = handle_ar_packets(ctx, p, end); |
| if (p != end) { |
| if (p > end) |
| ar_context_abort(ctx, "inconsistent descriptor"); |
| goto error; |
| } |
| |
| ctx->pointer = p; |
| ar_recycle_buffers(ctx, end_buffer_index); |
| |
| return; |
| |
| error: |
| ctx->pointer = NULL; |
| } |
| |
| static int ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, |
| unsigned int descriptors_offset, u32 regs) |
| { |
| unsigned int i; |
| dma_addr_t dma_addr; |
| struct page *pages[AR_BUFFERS + AR_WRAPAROUND_PAGES]; |
| struct descriptor *d; |
| |
| ctx->regs = regs; |
| ctx->ohci = ohci; |
| tasklet_init(&ctx->tasklet, ar_context_tasklet, (unsigned long)ctx); |
| |
| for (i = 0; i < AR_BUFFERS; i++) { |
| ctx->pages[i] = alloc_page(GFP_KERNEL | GFP_DMA32); |
| if (!ctx->pages[i]) |
| goto out_of_memory; |
| dma_addr = dma_map_page(ohci->card.device, ctx->pages[i], |
| 0, PAGE_SIZE, DMA_FROM_DEVICE); |
| if (dma_mapping_error(ohci->card.device, dma_addr)) { |
| __free_page(ctx->pages[i]); |
| ctx->pages[i] = NULL; |
| goto out_of_memory; |
| } |
| set_page_private(ctx->pages[i], dma_addr); |
| } |
| |
| for (i = 0; i < AR_BUFFERS; i++) |
| pages[i] = ctx->pages[i]; |
| for (i = 0; i < AR_WRAPAROUND_PAGES; i++) |
| pages[AR_BUFFERS + i] = ctx->pages[i]; |
| ctx->buffer = vmap(pages, ARRAY_SIZE(pages), VM_MAP, PAGE_KERNEL); |
| if (!ctx->buffer) |
| goto out_of_memory; |
| |
| ctx->descriptors = ohci->misc_buffer + descriptors_offset; |
| ctx->descriptors_bus = ohci->misc_buffer_bus + descriptors_offset; |
| |
| for (i = 0; i < AR_BUFFERS; i++) { |
| d = &ctx->descriptors[i]; |
| d->req_count = cpu_to_le16(PAGE_SIZE); |
| d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | |
| DESCRIPTOR_STATUS | |
| DESCRIPTOR_BRANCH_ALWAYS); |
| d->data_address = cpu_to_le32(ar_buffer_bus(ctx, i)); |
| d->branch_address = cpu_to_le32(ctx->descriptors_bus + |
| ar_next_buffer_index(i) * sizeof(struct descriptor)); |
| } |
| |
| return 0; |
| |
| out_of_memory: |
| ar_context_release(ctx); |
| |
| return -ENOMEM; |
| } |
| |
| static void ar_context_run(struct ar_context *ctx) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < AR_BUFFERS; i++) |
| ar_context_link_page(ctx, i); |
| |
| ctx->pointer = ctx->buffer; |
| |
| reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ctx->descriptors_bus | 1); |
| reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN); |
| } |
| |
| static struct descriptor *find_branch_descriptor(struct descriptor *d, int z) |
| { |
| __le16 branch; |
| |
| branch = d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS); |
| |
| /* figure out which descriptor the branch address goes in */ |
| if (z == 2 && branch == cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS)) |
| return d; |
| else |
| return d + z - 1; |
| } |
| |
| static void context_tasklet(unsigned long data) |
| { |
| struct context *ctx = (struct context *) data; |
| struct descriptor *d, *last; |
| u32 address; |
| int z; |
| struct descriptor_buffer *desc; |
| |
| desc = list_entry(ctx->buffer_list.next, |
| struct descriptor_buffer, list); |
| last = ctx->last; |
| while (last->branch_address != 0) { |
| struct descriptor_buffer *old_desc = desc; |
| address = le32_to_cpu(last->branch_address); |
| z = address & 0xf; |
| address &= ~0xf; |
| ctx->current_bus = address; |
| |
| /* If the branch address points to a buffer outside of the |
| * current buffer, advance to the next buffer. */ |
| if (address < desc->buffer_bus || |
| address >= desc->buffer_bus + desc->used) |
| desc = list_entry(desc->list.next, |
| struct descriptor_buffer, list); |
| d = desc->buffer + (address - desc->buffer_bus) / sizeof(*d); |
| last = find_branch_descriptor(d, z); |
| |
| if (!ctx->callback(ctx, d, last)) |
| break; |
| |
| if (old_desc != desc) { |
| /* If we've advanced to the next buffer, move the |
| * previous buffer to the free list. */ |
| unsigned long flags; |
| old_desc->used = 0; |
| spin_lock_irqsave(&ctx->ohci->lock, flags); |
| list_move_tail(&old_desc->list, &ctx->buffer_list); |
| spin_unlock_irqrestore(&ctx->ohci->lock, flags); |
| } |
| ctx->last = last; |
| } |
| } |
| |
| /* |
| * Allocate a new buffer and add it to the list of free buffers for this |
| * context. Must be called with ohci->lock held. |
| */ |
| static int context_add_buffer(struct context *ctx) |
| { |
| struct descriptor_buffer *desc; |
| dma_addr_t uninitialized_var(bus_addr); |
| int offset; |
| |
| /* |
| * 16MB of descriptors should be far more than enough for any DMA |
| * program. This will catch run-away userspace or DoS attacks. |
| */ |
| if (ctx->total_allocation >= 16*1024*1024) |
| return -ENOMEM; |
| |
| desc = dma_alloc_coherent(ctx->ohci->card.device, PAGE_SIZE, |
| &bus_addr, GFP_ATOMIC); |
| if (!desc) |
| return -ENOMEM; |
| |
| offset = (void *)&desc->buffer - (void *)desc; |
| desc->buffer_size = PAGE_SIZE - offset; |
| desc->buffer_bus = bus_addr + offset; |
| desc->used = 0; |
| |
| list_add_tail(&desc->list, &ctx->buffer_list); |
| ctx->total_allocation += PAGE_SIZE; |
| |
| return 0; |
| } |
| |
| static int context_init(struct context *ctx, struct fw_ohci *ohci, |
| u32 regs, descriptor_callback_t callback) |
| { |
| ctx->ohci = ohci; |
| ctx->regs = regs; |
| ctx->total_allocation = 0; |
| |
| INIT_LIST_HEAD(&ctx->buffer_list); |
| if (context_add_buffer(ctx) < 0) |
| return -ENOMEM; |
| |
| ctx->buffer_tail = list_entry(ctx->buffer_list.next, |
| struct descriptor_buffer, list); |
| |
| tasklet_init(&ctx->tasklet, context_tasklet, (unsigned long)ctx); |
| ctx->callback = callback; |
| |
| /* |
| * We put a dummy descriptor in the buffer that has a NULL |
| * branch address and looks like it's been sent. That way we |
| * have a descriptor to append DMA programs to. |
| */ |
| memset(ctx->buffer_tail->buffer, 0, sizeof(*ctx->buffer_tail->buffer)); |
| ctx->buffer_tail->buffer->control = cpu_to_le16(DESCRIPTOR_OUTPUT_LAST); |
| ctx->buffer_tail->buffer->transfer_status = cpu_to_le16(0x8011); |
| ctx->buffer_tail->used += sizeof(*ctx->buffer_tail->buffer); |
| ctx->last = ctx->buffer_tail->buffer; |
| ctx->prev = ctx->buffer_tail->buffer; |
| ctx->prev_z = 1; |
| |
| return 0; |
| } |
| |
| static void context_release(struct context *ctx) |
| { |
| struct fw_card *card = &ctx->ohci->card; |
| struct descriptor_buffer *desc, *tmp; |
| |
| list_for_each_entry_safe(desc, tmp, &ctx->buffer_list, list) |
| dma_free_coherent(card->device, PAGE_SIZE, desc, |
| desc->buffer_bus - |
| ((void *)&desc->buffer - (void *)desc)); |
| } |
| |
| /* Must be called with ohci->lock held */ |
| static struct descriptor *context_get_descriptors(struct context *ctx, |
| int z, dma_addr_t *d_bus) |
| { |
| struct descriptor *d = NULL; |
| struct descriptor_buffer *desc = ctx->buffer_tail; |
| |
| if (z * sizeof(*d) > desc->buffer_size) |
| return NULL; |
| |
| if (z * sizeof(*d) > desc->buffer_size - desc->used) { |
| /* No room for the descriptor in this buffer, so advance to the |
| * next one. */ |
| |
| if (desc->list.next == &ctx->buffer_list) { |
| /* If there is no free buffer next in the list, |
| * allocate one. */ |
| if (context_add_buffer(ctx) < 0) |
| return NULL; |
| } |
| desc = list_entry(desc->list.next, |
| struct descriptor_buffer, list); |
| ctx->buffer_tail = desc; |
| } |
| |
| d = desc->buffer + desc->used / sizeof(*d); |
| memset(d, 0, z * sizeof(*d)); |
| *d_bus = desc->buffer_bus + desc->used; |
| |
| return d; |
| } |
| |
| static void context_run(struct context *ctx, u32 extra) |
| { |
| struct fw_ohci *ohci = ctx->ohci; |
| |
| reg_write(ohci, COMMAND_PTR(ctx->regs), |
| le32_to_cpu(ctx->last->branch_address)); |
| reg_write(ohci, CONTROL_CLEAR(ctx->regs), ~0); |
| reg_write(ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN | extra); |
| ctx->running = true; |
| flush_writes(ohci); |
| } |
| |
| static void context_append(struct context *ctx, |
| struct descriptor *d, int z, int extra) |
| { |
| dma_addr_t d_bus; |
| struct descriptor_buffer *desc = ctx->buffer_tail; |
| struct descriptor *d_branch; |
| |
| d_bus = desc->buffer_bus + (d - desc->buffer) * sizeof(*d); |
| |
| desc->used += (z + extra) * sizeof(*d); |
| |
| wmb(); /* finish init of new descriptors before branch_address update */ |
| |
| d_branch = find_branch_descriptor(ctx->prev, ctx->prev_z); |
| d_branch->branch_address = cpu_to_le32(d_bus | z); |
| |
| /* |
| * VT6306 incorrectly checks only the single descriptor at the |
| * CommandPtr when the wake bit is written, so if it's a |
| * multi-descriptor block starting with an INPUT_MORE, put a copy of |
| * the branch address in the first descriptor. |
| * |
| * Not doing this for transmit contexts since not sure how it interacts |
| * with skip addresses. |
| */ |
| if (unlikely(ctx->ohci->quirks & QUIRK_IR_WAKE) && |
| d_branch != ctx->prev && |
| (ctx->prev->control & cpu_to_le16(DESCRIPTOR_CMD)) == |
| cpu_to_le16(DESCRIPTOR_INPUT_MORE)) { |
| ctx->prev->branch_address = cpu_to_le32(d_bus | z); |
| } |
| |
| ctx->prev = d; |
| ctx->prev_z = z; |
| } |
| |
| static void context_stop(struct context *ctx) |
| { |
| struct fw_ohci *ohci = ctx->ohci; |
| u32 reg; |
| int i; |
| |
| reg_write(ohci, CONTROL_CLEAR(ctx->regs), CONTEXT_RUN); |
| ctx->running = false; |
| |
| for (i = 0; i < 1000; i++) { |
| reg = reg_read(ohci, CONTROL_SET(ctx->regs)); |
| if ((reg & CONTEXT_ACTIVE) == 0) |
| return; |
| |
| if (i) |
| udelay(10); |
| } |
| ohci_err(ohci, "DMA context still active (0x%08x)\n", reg); |
| } |
| |
| struct driver_data { |
| u8 inline_data[8]; |
| struct fw_packet *packet; |
| }; |
| |
| /* |
| * This function apppends a packet to the DMA queue for transmission. |
| * Must always be called with the ochi->lock held to ensure proper |
| * generation handling and locking around packet queue manipulation. |
| */ |
| static int at_context_queue_packet(struct context *ctx, |
| struct fw_packet *packet) |
| { |
| struct fw_ohci *ohci = ctx->ohci; |
| dma_addr_t d_bus, uninitialized_var(payload_bus); |
| struct driver_data *driver_data; |
| struct descriptor *d, *last; |
| __le32 *header; |
| int z, tcode; |
| |
| d = context_get_descriptors(ctx, 4, &d_bus); |
| if (d == NULL) { |
| packet->ack = RCODE_SEND_ERROR; |
| return -1; |
| } |
| |
| d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE); |
| d[0].res_count = cpu_to_le16(packet->timestamp); |
| |
| /* |
| * The DMA format for asynchronous link packets is different |
| * from the IEEE1394 layout, so shift the fields around |
| * accordingly. |
| */ |
| |
| tcode = (packet->header[0] >> 4) & 0x0f; |
| header = (__le32 *) &d[1]; |
| switch (tcode) { |
| case TCODE_WRITE_QUADLET_REQUEST: |
| case TCODE_WRITE_BLOCK_REQUEST: |
| case TCODE_WRITE_RESPONSE: |
| case TCODE_READ_QUADLET_REQUEST: |
| case TCODE_READ_BLOCK_REQUEST: |
| case TCODE_READ_QUADLET_RESPONSE: |
| case TCODE_READ_BLOCK_RESPONSE: |
| case TCODE_LOCK_REQUEST: |
| case TCODE_LOCK_RESPONSE: |
| header[0] = cpu_to_le32((packet->header[0] & 0xffff) | |
| (packet->speed << 16)); |
| header[1] = cpu_to_le32((packet->header[1] & 0xffff) | |
| (packet->header[0] & 0xffff0000)); |
| header[2] = cpu_to_le32(packet->header[2]); |
| |
| if (TCODE_IS_BLOCK_PACKET(tcode)) |
| header[3] = cpu_to_le32(packet->header[3]); |
| else |
| header[3] = (__force __le32) packet->header[3]; |
| |
| d[0].req_count = cpu_to_le16(packet->header_length); |
| break; |
| |
| case TCODE_LINK_INTERNAL: |
| header[0] = cpu_to_le32((OHCI1394_phy_tcode << 4) | |
| (packet->speed << 16)); |
| header[1] = cpu_to_le32(packet->header[1]); |
| header[2] = cpu_to_le32(packet->header[2]); |
| d[0].req_count = cpu_to_le16(12); |
| |
| if (is_ping_packet(&packet->header[1])) |
| d[0].control |= cpu_to_le16(DESCRIPTOR_PING); |
| break; |
| |
| case TCODE_STREAM_DATA: |
| header[0] = cpu_to_le32((packet->header[0] & 0xffff) | |
| (packet->speed << 16)); |
| header[1] = cpu_to_le32(packet->header[0] & 0xffff0000); |
| d[0].req_count = cpu_to_le16(8); |
| break; |
| |
| default: |
| /* BUG(); */ |
| packet->ack = RCODE_SEND_ERROR; |
| return -1; |
| } |
| |
| BUILD_BUG_ON(sizeof(struct driver_data) > sizeof(struct descriptor)); |
| driver_data = (struct driver_data *) &d[3]; |
| driver_data->packet = packet; |
| packet->driver_data = driver_data; |
| |
| if (packet->payload_length > 0) { |
| if (packet->payload_length > sizeof(driver_data->inline_data)) { |
| payload_bus = dma_map_single(ohci->card.device, |
| packet->payload, |
| packet->payload_length, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(ohci->card.device, payload_bus)) { |
| packet->ack = RCODE_SEND_ERROR; |
| return -1; |
| } |
| packet->payload_bus = payload_bus; |
| packet->payload_mapped = true; |
| } else { |
| memcpy(driver_data->inline_data, packet->payload, |
| packet->payload_length); |
| payload_bus = d_bus + 3 * sizeof(*d); |
| } |
| |
| d[2].req_count = cpu_to_le16(packet->payload_length); |
| d[2].data_address = cpu_to_le32(payload_bus); |
| last = &d[2]; |
| z = 3; |
| } else { |
| last = &d[0]; |
| z = 2; |
| } |
| |
| last->control |= cpu_to_le16(DESCRIPTOR_OUTPUT_LAST | |
| DESCRIPTOR_IRQ_ALWAYS | |
| DESCRIPTOR_BRANCH_ALWAYS); |
| |
| /* FIXME: Document how the locking works. */ |
| if (ohci->generation != packet->generation) { |
| if (packet->payload_mapped) |
| dma_unmap_single(ohci->card.device, payload_bus, |
| packet->payload_length, DMA_TO_DEVICE); |
| packet->ack = RCODE_GENERATION; |
| return -1; |
| } |
| |
| context_append(ctx, d, z, 4 - z); |
| |
| if (ctx->running) |
| reg_write(ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE); |
| else |
| context_run(ctx, 0); |
| |
| return 0; |
| } |
| |
| static void at_context_flush(struct context *ctx) |
| { |
| tasklet_disable(&ctx->tasklet); |
| |
| ctx->flushing = true; |
| context_tasklet((unsigned long)ctx); |
| ctx->flushing = false; |
| |
| tasklet_enable(&ctx->tasklet); |
| } |
| |
| static int handle_at_packet(struct context *context, |
| struct descriptor *d, |
| struct descriptor *last) |
| { |
| struct driver_data *driver_data; |
| struct fw_packet *packet; |
| struct fw_ohci *ohci = context->ohci; |
| int evt; |
| |
| if (last->transfer_status == 0 && !context->flushing) |
| /* This descriptor isn't done yet, stop iteration. */ |
| return 0; |
| |
| driver_data = (struct driver_data *) &d[3]; |
| packet = driver_data->packet; |
| if (packet == NULL) |
| /* This packet was cancelled, just continue. */ |
| return 1; |
| |
| if (packet->payload_mapped) |
| dma_unmap_single(ohci->card.device, packet->payload_bus, |
| packet->payload_length, DMA_TO_DEVICE); |
| |
| evt = le16_to_cpu(last->transfer_status) & 0x1f; |
| packet->timestamp = le16_to_cpu(last->res_count); |
| |
| log_ar_at_event(ohci, 'T', packet->speed, packet->header, evt); |
| |
| switch (evt) { |
| case OHCI1394_evt_timeout: |
| /* Async response transmit timed out. */ |
| packet->ack = RCODE_CANCELLED; |
| break; |
| |
| case OHCI1394_evt_flushed: |
| /* |
| * The packet was flushed should give same error as |
| * when we try to use a stale generation count. |
| */ |
| packet->ack = RCODE_GENERATION; |
| break; |
| |
| case OHCI1394_evt_missing_ack: |
| if (context->flushing) |
| packet->ack = RCODE_GENERATION; |
| else { |
| /* |
| * Using a valid (current) generation count, but the |
| * node is not on the bus or not sending acks. |
| */ |
| packet->ack = RCODE_NO_ACK; |
| } |
| break; |
| |
| case ACK_COMPLETE + 0x10: |
| case ACK_PENDING + 0x10: |
| case ACK_BUSY_X + 0x10: |
| case ACK_BUSY_A + 0x10: |
| case ACK_BUSY_B + 0x10: |
| case ACK_DATA_ERROR + 0x10: |
| case ACK_TYPE_ERROR + 0x10: |
| packet->ack = evt - 0x10; |
| break; |
| |
| case OHCI1394_evt_no_status: |
| if (context->flushing) { |
| packet->ack = RCODE_GENERATION; |
| break; |
| } |
| /* fall through */ |
| |
| default: |
| packet->ack = RCODE_SEND_ERROR; |
| break; |
| } |
| |
| packet->callback(packet, &ohci->card, packet->ack); |
| |
| return 1; |
| } |
| |
| #define HEADER_GET_DESTINATION(q) (((q) >> 16) & 0xffff) |
| #define HEADER_GET_TCODE(q) (((q) >> 4) & 0x0f) |
| #define HEADER_GET_OFFSET_HIGH(q) (((q) >> 0) & 0xffff) |
| #define HEADER_GET_DATA_LENGTH(q) (((q) >> 16) & 0xffff) |
| #define HEADER_GET_EXTENDED_TCODE(q) (((q) >> 0) & 0xffff) |
| |
| static void handle_local_rom(struct fw_ohci *ohci, |
| struct fw_packet *packet, u32 csr) |
| { |
| struct fw_packet response; |
| int tcode, length, i; |
| |
| tcode = HEADER_GET_TCODE(packet->header[0]); |
| if (TCODE_IS_BLOCK_PACKET(tcode)) |
| length = HEADER_GET_DATA_LENGTH(packet->header[3]); |
| else |
| length = 4; |
| |
| i = csr - CSR_CONFIG_ROM; |
| if (i + length > CONFIG_ROM_SIZE) { |
| fw_fill_response(&response, packet->header, |
| RCODE_ADDRESS_ERROR, NULL, 0); |
| } else if (!TCODE_IS_READ_REQUEST(tcode)) { |
| fw_fill_response(&response, packet->header, |
| RCODE_TYPE_ERROR, NULL, 0); |
| } else { |
| fw_fill_response(&response, packet->header, RCODE_COMPLETE, |
| (void *) ohci->config_rom + i, length); |
| } |
| |
| fw_core_handle_response(&ohci->card, &response); |
| } |
| |
| static void handle_local_lock(struct fw_ohci *ohci, |
| struct fw_packet *packet, u32 csr) |
| { |
| struct fw_packet response; |
| int tcode, length, ext_tcode, sel, try; |
| __be32 *payload, lock_old; |
| u32 lock_arg, lock_data; |
| |
| tcode = HEADER_GET_TCODE(packet->header[0]); |
| length = HEADER_GET_DATA_LENGTH(packet->header[3]); |
| payload = packet->payload; |
| ext_tcode = HEADER_GET_EXTENDED_TCODE(packet->header[3]); |
| |
| if (tcode == TCODE_LOCK_REQUEST && |
| ext_tcode == EXTCODE_COMPARE_SWAP && length == 8) { |
| lock_arg = be32_to_cpu(payload[0]); |
| lock_data = be32_to_cpu(payload[1]); |
| } else if (tcode == TCODE_READ_QUADLET_REQUEST) { |
| lock_arg = 0; |
| lock_data = 0; |
| } else { |
| fw_fill_response(&response, packet->header, |
| RCODE_TYPE_ERROR, NULL, 0); |
| goto out; |
| } |
| |
| sel = (csr - CSR_BUS_MANAGER_ID) / 4; |
| reg_write(ohci, OHCI1394_CSRData, lock_data); |
| reg_write(ohci, OHCI1394_CSRCompareData, lock_arg); |
| reg_write(ohci, OHCI1394_CSRControl, sel); |
| |
| for (try = 0; try < 20; try++) |
| if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) { |
| lock_old = cpu_to_be32(reg_read(ohci, |
| OHCI1394_CSRData)); |
| fw_fill_response(&response, packet->header, |
| RCODE_COMPLETE, |
| &lock_old, sizeof(lock_old)); |
| goto out; |
| } |
| |
| ohci_err(ohci, "swap not done (CSR lock timeout)\n"); |
| fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0); |
| |
| out: |
| fw_core_handle_response(&ohci->card, &response); |
| } |
| |
| static void handle_local_request(struct context *ctx, struct fw_packet *packet) |
| { |
| u64 offset, csr; |
| |
| if (ctx == &ctx->ohci->at_request_ctx) { |
| packet->ack = ACK_PENDING; |
| packet->callback(packet, &ctx->ohci->card, packet->ack); |
| } |
| |
| offset = |
| ((unsigned long long) |
| HEADER_GET_OFFSET_HIGH(packet->header[1]) << 32) | |
| packet->header[2]; |
| csr = offset - CSR_REGISTER_BASE; |
| |
| /* Handle config rom reads. */ |
| if (csr >= CSR_CONFIG_ROM && csr < CSR_CONFIG_ROM_END) |
| handle_local_rom(ctx->ohci, packet, csr); |
| else switch (csr) { |
| case CSR_BUS_MANAGER_ID: |
| case CSR_BANDWIDTH_AVAILABLE: |
| case CSR_CHANNELS_AVAILABLE_HI: |
| case CSR_CHANNELS_AVAILABLE_LO: |
| handle_local_lock(ctx->ohci, packet, csr); |
| break; |
| default: |
| if (ctx == &ctx->ohci->at_request_ctx) |
| fw_core_handle_request(&ctx->ohci->card, packet); |
| else |
| fw_core_handle_response(&ctx->ohci->card, packet); |
| break; |
| } |
| |
| if (ctx == &ctx->ohci->at_response_ctx) { |
| packet->ack = ACK_COMPLETE; |
| packet->callback(packet, &ctx->ohci->card, packet->ack); |
| } |
| } |
| |
| static void at_context_transmit(struct context *ctx, struct fw_packet *packet) |
| { |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&ctx->ohci->lock, flags); |
| |
| if (HEADER_GET_DESTINATION(packet->header[0]) == ctx->ohci->node_id && |
| ctx->ohci->generation == packet->generation) { |
| spin_unlock_irqrestore(&ctx->ohci->lock, flags); |
| handle_local_request(ctx, packet); |
| return; |
| } |
| |
| ret = at_context_queue_packet(ctx, packet); |
| spin_unlock_irqrestore(&ctx->ohci->lock, flags); |
| |
| if (ret < 0) |
| packet->callback(packet, &ctx->ohci->card, packet->ack); |
| |
| } |
| |
| static void detect_dead_context(struct fw_ohci *ohci, |
| const char *name, unsigned int regs) |
| { |
| u32 ctl; |
| |
| ctl = reg_read(ohci, CONTROL_SET(regs)); |
| if (ctl & CONTEXT_DEAD) |
| ohci_err(ohci, "DMA context %s has stopped, error code: %s\n", |
| name, evts[ctl & 0x1f]); |
| } |
| |
| static void handle_dead_contexts(struct fw_ohci *ohci) |
| { |
| unsigned int i; |
| char name[8]; |
| |
| detect_dead_context(ohci, "ATReq", OHCI1394_AsReqTrContextBase); |
| detect_dead_context(ohci, "ATRsp", OHCI1394_AsRspTrContextBase); |
| detect_dead_context(ohci, "ARReq", OHCI1394_AsReqRcvContextBase); |
| detect_dead_context(ohci, "ARRsp", OHCI1394_AsRspRcvContextBase); |
| for (i = 0; i < 32; ++i) { |
| if (!(ohci->it_context_support & (1 << i))) |
| continue; |
| sprintf(name, "IT%u", i); |
| detect_dead_context(ohci, name, OHCI1394_IsoXmitContextBase(i)); |
| } |
| for (i = 0; i < 32; ++i) { |
| if (!(ohci->ir_context_support & (1 << i))) |
| continue; |
| sprintf(name, "IR%u", i); |
| detect_dead_context(ohci, name, OHCI1394_IsoRcvContextBase(i)); |
| } |
| /* TODO: maybe try to flush and restart the dead contexts */ |
| } |
| |
| static u32 cycle_timer_ticks(u32 cycle_timer) |
| { |
| u32 ticks; |
| |
| ticks = cycle_timer & 0xfff; |
| ticks += 3072 * ((cycle_timer >> 12) & 0x1fff); |
| ticks += (3072 * 8000) * (cycle_timer >> 25); |
| |
| return ticks; |
| } |
| |
| /* |
| * Some controllers exhibit one or more of the following bugs when updating the |
| * iso cycle timer register: |
| * - When the lowest six bits are wrapping around to zero, a read that happens |
| * at the same time will return garbage in the lowest ten bits. |
| * - When the cycleOffset field wraps around to zero, the cycleCount field is |
| * not incremented for about 60 ns. |
| * - Occasionally, the entire register reads zero. |
| * |
| * To catch these, we read the register three times and ensure that the |
| * difference between each two consecutive reads is approximately the same, i.e. |
| * less than twice the other. Furthermore, any negative difference indicates an |
| * error. (A PCI read should take at least 20 ticks of the 24.576 MHz timer to |
| * execute, so we have enough precision to compute the ratio of the differences.) |
| */ |
| static u32 get_cycle_time(struct fw_ohci *ohci) |
| { |
| u32 c0, c1, c2; |
| u32 t0, t1, t2; |
| s32 diff01, diff12; |
| int i; |
| |
| c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer); |
| |
| if (ohci->quirks & QUIRK_CYCLE_TIMER) { |
| i = 0; |
| c1 = c2; |
| c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer); |
| do { |
| c0 = c1; |
| c1 = c2; |
| c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer); |
| t0 = cycle_timer_ticks(c0); |
| t1 = cycle_timer_ticks(c1); |
| t2 = cycle_timer_ticks(c2); |
| diff01 = t1 - t0; |
| diff12 = t2 - t1; |
| } while ((diff01 <= 0 || diff12 <= 0 || |
| diff01 / diff12 >= 2 || diff12 / diff01 >= 2) |
| && i++ < 20); |
| } |
| |
| return c2; |
| } |
| |
| /* |
| * This function has to be called at least every 64 seconds. The bus_time |
| * field stores not only the upper 25 bits of the BUS_TIME register but also |
| * the most significant bit of the cycle timer in bit 6 so that we can detect |
| * changes in this bit. |
| */ |
| static u32 update_bus_time(struct fw_ohci *ohci) |
| { |
| u32 cycle_time_seconds = get_cycle_time(ohci) >> 25; |
| |
| if (unlikely(!ohci->bus_time_running)) { |
| reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_cycle64Seconds); |
| ohci->bus_time = (lower_32_bits(get_seconds()) & ~0x7f) | |
| (cycle_time_seconds & 0x40); |
| ohci->bus_time_running = true; |
| } |
| |
| if ((ohci->bus_time & 0x40) != (cycle_time_seconds & 0x40)) |
| ohci->bus_time += 0x40; |
| |
| return ohci->bus_time | cycle_time_seconds; |
| } |
| |
| static int get_status_for_port(struct fw_ohci *ohci, int port_index) |
| { |
| int reg; |
| |
| mutex_lock(&ohci->phy_reg_mutex); |
| reg = write_phy_reg(ohci, 7, port_index); |
| if (reg >= 0) |
| reg = read_phy_reg(ohci, 8); |
| mutex_unlock(&ohci->phy_reg_mutex); |
| if (reg < 0) |
| return reg; |
| |
| switch (reg & 0x0f) { |
| case 0x06: |
| return 2; /* is child node (connected to parent node) */ |
| case 0x0e: |
| return 3; /* is parent node (connected to child node) */ |
| } |
| return 1; /* not connected */ |
| } |
| |
| static int get_self_id_pos(struct fw_ohci *ohci, u32 self_id, |
| int self_id_count) |
| { |
| int i; |
| u32 entry; |
| |
| for (i = 0; i < self_id_count; i++) { |
| entry = ohci->self_id_buffer[i]; |
| if ((self_id & 0xff000000) == (entry & 0xff000000)) |
| return -1; |
| if ((self_id & 0xff000000) < (entry & 0xff000000)) |
| return i; |
| } |
| return i; |
| } |
| |
| static int initiated_reset(struct fw_ohci *ohci) |
| { |
| int reg; |
| int ret = 0; |
| |
| mutex_lock(&ohci->phy_reg_mutex); |
| reg = write_phy_reg(ohci, 7, 0xe0); /* Select page 7 */ |
| if (reg >= 0) { |
| reg = read_phy_reg(ohci, 8); |
| reg |= 0x40; |
| reg = write_phy_reg(ohci, 8, reg); /* set PMODE bit */ |
| if (reg >= 0) { |
| reg = read_phy_reg(ohci, 12); /* read register 12 */ |
| if (reg >= 0) { |
| if ((reg & 0x08) == 0x08) { |
| /* bit 3 indicates "initiated reset" */ |
| ret = 0x2; |
| } |
| } |
| } |
| } |
| mutex_unlock(&ohci->phy_reg_mutex); |
| return ret; |
| } |
| |
| /* |
| * TI TSB82AA2B and TSB12LV26 do not receive the selfID of a locally |
| * attached TSB41BA3D phy; see http://www.ti.com/litv/pdf/sllz059. |
| * Construct the selfID from phy register contents. |
| */ |
| static int find_and_insert_self_id(struct fw_ohci *ohci, int self_id_count) |
| { |
| int reg, i, pos, status; |
| /* link active 1, speed 3, bridge 0, contender 1, more packets 0 */ |
| u32 self_id = 0x8040c800; |
| |
| reg = reg_read(ohci, OHCI1394_NodeID); |
| if (!(reg & OHCI1394_NodeID_idValid)) { |
| ohci_notice(ohci, |
| "node ID not valid, new bus reset in progress\n"); |
| return -EBUSY; |
| } |
| self_id |= ((reg & 0x3f) << 24); /* phy ID */ |
| |
| reg = ohci_read_phy_reg(&ohci->card, 4); |
| if (reg < 0) |
| return reg; |
| self_id |= ((reg & 0x07) << 8); /* power class */ |
| |
| reg = ohci_read_phy_reg(&ohci->card, 1); |
| if (reg < 0) |
| return reg; |
| self_id |= ((reg & 0x3f) << 16); /* gap count */ |
| |
| for (i = 0; i < 3; i++) { |
| status = get_status_for_port(ohci, i); |
| if (status < 0) |
| return status; |
| self_id |= ((status & 0x3) << (6 - (i * 2))); |
| } |
| |
| self_id |= initiated_reset(ohci); |
| |
| pos = get_self_id_pos(ohci, self_id, self_id_count); |
| if (pos >= 0) { |
| memmove(&(ohci->self_id_buffer[pos+1]), |
| &(ohci->self_id_buffer[pos]), |
| (self_id_count - pos) * sizeof(*ohci->self_id_buffer)); |
| ohci->self_id_buffer[pos] = self_id; |
| self_id_count++; |
| } |
| return self_id_count; |
| } |
| |
| static void bus_reset_work(struct work_struct *work) |
| { |
| struct fw_ohci *ohci = |
| container_of(work, struct fw_ohci, bus_reset_work); |
| int self_id_count, generation, new_generation, i, j; |
| u32 reg; |
| void *free_rom = NULL; |
| dma_addr_t free_rom_bus = 0; |
| bool is_new_root; |
| |
| reg = reg_read(ohci, OHCI1394_NodeID); |
| if (!(reg & OHCI1394_NodeID_idValid)) { |
| ohci_notice(ohci, |
| "node ID not valid, new bus reset in progress\n"); |
| return; |
| } |
| if ((reg & OHCI1394_NodeID_nodeNumber) == 63) { |
| ohci_notice(ohci, "malconfigured bus\n"); |
| return; |
| } |
| ohci->node_id = reg & (OHCI1394_NodeID_busNumber | |
| OHCI1394_NodeID_nodeNumber); |
| |
| is_new_root = (reg & OHCI1394_NodeID_root) != 0; |
| if (!(ohci->is_root && is_new_root)) |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_cycleMaster); |
| ohci->is_root = is_new_root; |
| |
| reg = reg_read(ohci, OHCI1394_SelfIDCount); |
| if (reg & OHCI1394_SelfIDCount_selfIDError) { |
| ohci_notice(ohci, "self ID receive error\n"); |
| return; |
| } |
| /* |
| * The count in the SelfIDCount register is the number of |
| * bytes in the self ID receive buffer. Since we also receive |
| * the inverted quadlets and a header quadlet, we shift one |
| * bit extra to get the actual number of self IDs. |
| */ |
| self_id_count = (reg >> 3) & 0xff; |
| |
| if (self_id_count > 252) { |
| ohci_notice(ohci, "bad selfIDSize (%08x)\n", reg); |
| return; |
| } |
| |
| generation = (cond_le32_to_cpu(ohci->self_id[0]) >> 16) & 0xff; |
| rmb(); |
| |
| for (i = 1, j = 0; j < self_id_count; i += 2, j++) { |
| u32 id = cond_le32_to_cpu(ohci->self_id[i]); |
| u32 id2 = cond_le32_to_cpu(ohci->self_id[i + 1]); |
| |
| if (id != ~id2) { |
| /* |
| * If the invalid data looks like a cycle start packet, |
| * it's likely to be the result of the cycle master |
| * having a wrong gap count. In this case, the self IDs |
| * so far are valid and should be processed so that the |
| * bus manager can then correct the gap count. |
| */ |
| if (id == 0xffff008f) { |
| ohci_notice(ohci, "ignoring spurious self IDs\n"); |
| self_id_count = j; |
| break; |
| } |
| |
| ohci_notice(ohci, "bad self ID %d/%d (%08x != ~%08x)\n", |
| j, self_id_count, id, id2); |
| return; |
| } |
| ohci->self_id_buffer[j] = id; |
| } |
| |
| if (ohci->quirks & QUIRK_TI_SLLZ059) { |
| self_id_count = find_and_insert_self_id(ohci, self_id_count); |
| if (self_id_count < 0) { |
| ohci_notice(ohci, |
| "could not construct local self ID\n"); |
| return; |
| } |
| } |
| |
| if (self_id_count == 0) { |
| ohci_notice(ohci, "no self IDs\n"); |
| return; |
| } |
| rmb(); |
| |
| /* |
| * Check the consistency of the self IDs we just read. The |
| * problem we face is that a new bus reset can start while we |
| * read out the self IDs from the DMA buffer. If this happens, |
| * the DMA buffer will be overwritten with new self IDs and we |
| * will read out inconsistent data. The OHCI specification |
| * (section 11.2) recommends a technique similar to |
| * linux/seqlock.h, where we remember the generation of the |
| * self IDs in the buffer before reading them out and compare |
| * it to the current generation after reading them out. If |
| * the two generations match we know we have a consistent set |
| * of self IDs. |
| */ |
| |
| new_generation = (reg_read(ohci, OHCI1394_SelfIDCount) >> 16) & 0xff; |
| if (new_generation != generation) { |
| ohci_notice(ohci, "new bus reset, discarding self ids\n"); |
| return; |
| } |
| |
| /* FIXME: Document how the locking works. */ |
| spin_lock_irq(&ohci->lock); |
| |
| ohci->generation = -1; /* prevent AT packet queueing */ |
| context_stop(&ohci->at_request_ctx); |
| context_stop(&ohci->at_response_ctx); |
| |
| spin_unlock_irq(&ohci->lock); |
| |
| /* |
| * Per OHCI 1.2 draft, clause 7.2.3.3, hardware may leave unsent |
| * packets in the AT queues and software needs to drain them. |
| * Some OHCI 1.1 controllers (JMicron) apparently require this too. |
| */ |
| at_context_flush(&ohci->at_request_ctx); |
| at_context_flush(&ohci->at_response_ctx); |
| |
| spin_lock_irq(&ohci->lock); |
| |
| ohci->generation = generation; |
| reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); |
| |
| if (ohci->quirks & QUIRK_RESET_PACKET) |
| ohci->request_generation = generation; |
| |
| /* |
| * This next bit is unrelated to the AT context stuff but we |
| * have to do it under the spinlock also. If a new config rom |
| * was set up before this reset, the old one is now no longer |
| * in use and we can free it. Update the config rom pointers |
| * to point to the current config rom and clear the |
| * next_config_rom pointer so a new update can take place. |
| */ |
| |
| if (ohci->next_config_rom != NULL) { |
| if (ohci->next_config_rom != ohci->config_rom) { |
| free_rom = ohci->config_rom; |
| free_rom_bus = ohci->config_rom_bus; |
| } |
| ohci->config_rom = ohci->next_config_rom; |
| ohci->config_rom_bus = ohci->next_config_rom_bus; |
| ohci->next_config_rom = NULL; |
| |
| /* |
| * Restore config_rom image and manually update |
| * config_rom registers. Writing the header quadlet |
| * will indicate that the config rom is ready, so we |
| * do that last. |
| */ |
| reg_write(ohci, OHCI1394_BusOptions, |
| be32_to_cpu(ohci->config_rom[2])); |
| ohci->config_rom[0] = ohci->next_header; |
| reg_write(ohci, OHCI1394_ConfigROMhdr, |
| be32_to_cpu(ohci->next_header)); |
| } |
| |
| if (param_remote_dma) { |
| reg_write(ohci, OHCI1394_PhyReqFilterHiSet, ~0); |
| reg_write(ohci, OHCI1394_PhyReqFilterLoSet, ~0); |
| } |
| |
| spin_unlock_irq(&ohci->lock); |
| |
| if (free_rom) |
| dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, |
| free_rom, free_rom_bus); |
| |
| log_selfids(ohci, generation, self_id_count); |
| |
| fw_core_handle_bus_reset(&ohci->card, ohci->node_id, generation, |
| self_id_count, ohci->self_id_buffer, |
| ohci->csr_state_setclear_abdicate); |
| ohci->csr_state_setclear_abdicate = false; |
| } |
| |
| static irqreturn_t irq_handler(int irq, void *data) |
| { |
| struct fw_ohci *ohci = data; |
| u32 event, iso_event; |
| int i; |
| |
| event = reg_read(ohci, OHCI1394_IntEventClear); |
| |
| if (!event || !~event) |
| return IRQ_NONE; |
| |
| /* |
| * busReset and postedWriteErr must not be cleared yet |
| * (OHCI 1.1 clauses 7.2.3.2 and 13.2.8.1) |
| */ |
| reg_write(ohci, OHCI1394_IntEventClear, |
| event & ~(OHCI1394_busReset | OHCI1394_postedWriteErr)); |
| log_irqs(ohci, event); |
| |
| if (event & OHCI1394_selfIDComplete) |
| queue_work(selfid_workqueue, &ohci->bus_reset_work); |
| |
| if (event & OHCI1394_RQPkt) |
| tasklet_schedule(&ohci->ar_request_ctx.tasklet); |
| |
| if (event & OHCI1394_RSPkt) |
| tasklet_schedule(&ohci->ar_response_ctx.tasklet); |
| |
| if (event & OHCI1394_reqTxComplete) |
| tasklet_schedule(&ohci->at_request_ctx.tasklet); |
| |
| if (event & OHCI1394_respTxComplete) |
| tasklet_schedule(&ohci->at_response_ctx.tasklet); |
| |
| if (event & OHCI1394_isochRx) { |
| iso_event = reg_read(ohci, OHCI1394_IsoRecvIntEventClear); |
| reg_write(ohci, OHCI1394_IsoRecvIntEventClear, iso_event); |
| |
| while (iso_event) { |
| i = ffs(iso_event) - 1; |
| tasklet_schedule( |
| &ohci->ir_context_list[i].context.tasklet); |
| iso_event &= ~(1 << i); |
| } |
| } |
| |
| if (event & OHCI1394_isochTx) { |
| iso_event = reg_read(ohci, OHCI1394_IsoXmitIntEventClear); |
| reg_write(ohci, OHCI1394_IsoXmitIntEventClear, iso_event); |
| |
| while (iso_event) { |
| i = ffs(iso_event) - 1; |
| tasklet_schedule( |
| &ohci->it_context_list[i].context.tasklet); |
| iso_event &= ~(1 << i); |
| } |
| } |
| |
| if (unlikely(event & OHCI1394_regAccessFail)) |
| ohci_err(ohci, "register access failure\n"); |
| |
| if (unlikely(event & OHCI1394_postedWriteErr)) { |
| reg_read(ohci, OHCI1394_PostedWriteAddressHi); |
| reg_read(ohci, OHCI1394_PostedWriteAddressLo); |
| reg_write(ohci, OHCI1394_IntEventClear, |
| OHCI1394_postedWriteErr); |
| if (printk_ratelimit()) |
| ohci_err(ohci, "PCI posted write error\n"); |
| } |
| |
| if (unlikely(event & OHCI1394_cycleTooLong)) { |
| if (printk_ratelimit()) |
| ohci_notice(ohci, "isochronous cycle too long\n"); |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_cycleMaster); |
| } |
| |
| if (unlikely(event & OHCI1394_cycleInconsistent)) { |
| /* |
| * We need to clear this event bit in order to make |
| * cycleMatch isochronous I/O work. In theory we should |
| * stop active cycleMatch iso contexts now and restart |
| * them at least two cycles later. (FIXME?) |
| */ |
| if (printk_ratelimit()) |
| ohci_notice(ohci, "isochronous cycle inconsistent\n"); |
| } |
| |
| if (unlikely(event & OHCI1394_unrecoverableError)) |
| handle_dead_contexts(ohci); |
| |
| if (event & OHCI1394_cycle64Seconds) { |
| spin_lock(&ohci->lock); |
| update_bus_time(ohci); |
| spin_unlock(&ohci->lock); |
| } else |
| flush_writes(ohci); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int software_reset(struct fw_ohci *ohci) |
| { |
| u32 val; |
| int i; |
| |
| reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); |
| for (i = 0; i < 500; i++) { |
| val = reg_read(ohci, OHCI1394_HCControlSet); |
| if (!~val) |
| return -ENODEV; /* Card was ejected. */ |
| |
| if (!(val & OHCI1394_HCControl_softReset)) |
| return 0; |
| |
| msleep(1); |
| } |
| |
| return -EBUSY; |
| } |
| |
| static void copy_config_rom(__be32 *dest, const __be32 *src, size_t length) |
| { |
| size_t size = length * 4; |
| |
| memcpy(dest, src, size); |
| if (size < CONFIG_ROM_SIZE) |
| memset(&dest[length], 0, CONFIG_ROM_SIZE - size); |
| } |
| |
| static int configure_1394a_enhancements(struct fw_ohci *ohci) |
| { |
| bool enable_1394a; |
| int ret, clear, set, offset; |
| |
| /* Check if the driver should configure link and PHY. */ |
| if (!(reg_read(ohci, OHCI1394_HCControlSet) & |
| OHCI1394_HCControl_programPhyEnable)) |
| return 0; |
| |
| /* Paranoia: check whether the PHY supports 1394a, too. */ |
| enable_1394a = false; |
| ret = read_phy_reg(ohci, 2); |
| if (ret < 0) |
| return ret; |
| if ((ret & PHY_EXTENDED_REGISTERS) == PHY_EXTENDED_REGISTERS) { |
| ret = read_paged_phy_reg(ohci, 1, 8); |
| if (ret < 0) |
| return ret; |
| if (ret >= 1) |
| enable_1394a = true; |
| } |
| |
| if (ohci->quirks & QUIRK_NO_1394A) |
| enable_1394a = false; |
| |
| /* Configure PHY and link consistently. */ |
| if (enable_1394a) { |
| clear = 0; |
| set = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI; |
| } else { |
| clear = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI; |
| set = 0; |
| } |
| ret = update_phy_reg(ohci, 5, clear, set); |
| if (ret < 0) |
| return ret; |
| |
| if (enable_1394a) |
| offset = OHCI1394_HCControlSet; |
| else |
| offset = OHCI1394_HCControlClear; |
| reg_write(ohci, offset, OHCI1394_HCControl_aPhyEnhanceEnable); |
| |
| /* Clean up: configuration has been taken care of. */ |
| reg_write(ohci, OHCI1394_HCControlClear, |
| OHCI1394_HCControl_programPhyEnable); |
| |
| return 0; |
| } |
| |
| static int probe_tsb41ba3d(struct fw_ohci *ohci) |
| { |
| /* TI vendor ID = 0x080028, TSB41BA3D product ID = 0x833005 (sic) */ |
| static const u8 id[] = { 0x08, 0x00, 0x28, 0x83, 0x30, 0x05, }; |
| int reg, i; |
| |
| reg = read_phy_reg(ohci, 2); |
| if (reg < 0) |
| return reg; |
| if ((reg & PHY_EXTENDED_REGISTERS) != PHY_EXTENDED_REGISTERS) |
| return 0; |
| |
| for (i = ARRAY_SIZE(id) - 1; i >= 0; i--) { |
| reg = read_paged_phy_reg(ohci, 1, i + 10); |
| if (reg < 0) |
| return reg; |
| if (reg != id[i]) |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int ohci_enable(struct fw_card *card, |
| const __be32 *config_rom, size_t length) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| u32 lps, version, irqs; |
| int i, ret; |
| |
| if (software_reset(ohci)) { |
| ohci_err(ohci, "failed to reset ohci card\n"); |
| return -EBUSY; |
| } |
| |
| /* |
| * Now enable LPS, which we need in order to start accessing |
| * most of the registers. In fact, on some cards (ALI M5251), |
| * accessing registers in the SClk domain without LPS enabled |
| * will lock up the machine. Wait 50msec to make sure we have |
| * full link enabled. However, with some cards (well, at least |
| * a JMicron PCIe card), we have to try again sometimes. |
| * |
| * TI TSB82AA2 + TSB81BA3(A) cards signal LPS enabled early but |
| * cannot actually use the phy at that time. These need tens of |
| * millisecods pause between LPS write and first phy access too. |
| */ |
| |
| reg_write(ohci, OHCI1394_HCControlSet, |
| OHCI1394_HCControl_LPS | |
| OHCI1394_HCControl_postedWriteEnable); |
| flush_writes(ohci); |
| |
| for (lps = 0, i = 0; !lps && i < 3; i++) { |
| msleep(50); |
| lps = reg_read(ohci, OHCI1394_HCControlSet) & |
| OHCI1394_HCControl_LPS; |
| } |
| |
| if (!lps) { |
| ohci_err(ohci, "failed to set Link Power Status\n"); |
| return -EIO; |
| } |
| |
| if (ohci->quirks & QUIRK_TI_SLLZ059) { |
| ret = probe_tsb41ba3d(ohci); |
| if (ret < 0) |
| return ret; |
| if (ret) |
| ohci_notice(ohci, "local TSB41BA3D phy\n"); |
| else |
| ohci->quirks &= ~QUIRK_TI_SLLZ059; |
| } |
| |
| reg_write(ohci, OHCI1394_HCControlClear, |
| OHCI1394_HCControl_noByteSwapData); |
| |
| reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_cycleTimerEnable | |
| OHCI1394_LinkControl_cycleMaster); |
| |
| reg_write(ohci, OHCI1394_ATRetries, |
| OHCI1394_MAX_AT_REQ_RETRIES | |
| (OHCI1394_MAX_AT_RESP_RETRIES << 4) | |
| (OHCI1394_MAX_PHYS_RESP_RETRIES << 8) | |
| (200 << 16)); |
| |
| ohci->bus_time_running = false; |
| |
| for (i = 0; i < 32; i++) |
| if (ohci->ir_context_support & (1 << i)) |
| reg_write(ohci, OHCI1394_IsoRcvContextControlClear(i), |
| IR_CONTEXT_MULTI_CHANNEL_MODE); |
| |
| version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff; |
| if (version >= OHCI_VERSION_1_1) { |
| reg_write(ohci, OHCI1394_InitialChannelsAvailableHi, |
| 0xfffffffe); |
| card->broadcast_channel_auto_allocated = true; |
| } |
| |
| /* Get implemented bits of the priority arbitration request counter. */ |
| reg_write(ohci, OHCI1394_FairnessControl, 0x3f); |
| ohci->pri_req_max = reg_read(ohci, OHCI1394_FairnessControl) & 0x3f; |
| reg_write(ohci, OHCI1394_FairnessControl, 0); |
| card->priority_budget_implemented = ohci->pri_req_max != 0; |
| |
| reg_write(ohci, OHCI1394_PhyUpperBound, FW_MAX_PHYSICAL_RANGE >> 16); |
| reg_write(ohci, OHCI1394_IntEventClear, ~0); |
| reg_write(ohci, OHCI1394_IntMaskClear, ~0); |
| |
| ret = configure_1394a_enhancements(ohci); |
| if (ret < 0) |
| return ret; |
| |
| /* Activate link_on bit and contender bit in our self ID packets.*/ |
| ret = ohci_update_phy_reg(card, 4, 0, PHY_LINK_ACTIVE | PHY_CONTENDER); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * When the link is not yet enabled, the atomic config rom |
| * update mechanism described below in ohci_set_config_rom() |
| * is not active. We have to update ConfigRomHeader and |
| * BusOptions manually, and the write to ConfigROMmap takes |
| * effect immediately. We tie this to the enabling of the |
| * link, so we have a valid config rom before enabling - the |
| * OHCI requires that ConfigROMhdr and BusOptions have valid |
| * values before enabling. |
| * |
| * However, when the ConfigROMmap is written, some controllers |
| * always read back quadlets 0 and 2 from the config rom to |
| * the ConfigRomHeader and BusOptions registers on bus reset. |
| * They shouldn't do that in this initial case where the link |
| * isn't enabled. This means we have to use the same |
| * workaround here, setting the bus header to 0 and then write |
| * the right values in the bus reset tasklet. |
| */ |
| |
| if (config_rom) { |
| ohci->next_config_rom = |
| dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE, |
| &ohci->next_config_rom_bus, |
| GFP_KERNEL); |
| if (ohci->next_config_rom == NULL) |
| return -ENOMEM; |
| |
| copy_config_rom(ohci->next_config_rom, config_rom, length); |
| } else { |
| /* |
| * In the suspend case, config_rom is NULL, which |
| * means that we just reuse the old config rom. |
| */ |
| ohci->next_config_rom = ohci->config_rom; |
| ohci->next_config_rom_bus = ohci->config_rom_bus; |
| } |
| |
| ohci->next_header = ohci->next_config_rom[0]; |
| ohci->next_config_rom[0] = 0; |
| reg_write(ohci, OHCI1394_ConfigROMhdr, 0); |
| reg_write(ohci, OHCI1394_BusOptions, |
| be32_to_cpu(ohci->next_config_rom[2])); |
| reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus); |
| |
| reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000); |
| |
| irqs = OHCI1394_reqTxComplete | OHCI1394_respTxComplete | |
| OHCI1394_RQPkt | OHCI1394_RSPkt | |
| OHCI1394_isochTx | OHCI1394_isochRx | |
| OHCI1394_postedWriteErr | |
| OHCI1394_selfIDComplete | |
| OHCI1394_regAccessFail | |
| OHCI1394_cycleInconsistent | |
| OHCI1394_unrecoverableError | |
| OHCI1394_cycleTooLong | |
| OHCI1394_masterIntEnable; |
| if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS) |
| irqs |= OHCI1394_busReset; |
| reg_write(ohci, OHCI1394_IntMaskSet, irqs); |
| |
| reg_write(ohci, OHCI1394_HCControlSet, |
| OHCI1394_HCControl_linkEnable | |
| OHCI1394_HCControl_BIBimageValid); |
| |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_rcvSelfID | |
| OHCI1394_LinkControl_rcvPhyPkt); |
| |
| ar_context_run(&ohci->ar_request_ctx); |
| ar_context_run(&ohci->ar_response_ctx); |
| |
| flush_writes(ohci); |
| |
| /* We are ready to go, reset bus to finish initialization. */ |
| fw_schedule_bus_reset(&ohci->card, false, true); |
| |
| return 0; |
| } |
| |
| static int ohci_set_config_rom(struct fw_card *card, |
| const __be32 *config_rom, size_t length) |
| { |
| struct fw_ohci *ohci; |
| __be32 *next_config_rom; |
| dma_addr_t uninitialized_var(next_config_rom_bus); |
| |
| ohci = fw_ohci(card); |
| |
| /* |
| * When the OHCI controller is enabled, the config rom update |
| * mechanism is a bit tricky, but easy enough to use. See |
| * section 5.5.6 in the OHCI specification. |
| * |
| * The OHCI controller caches the new config rom address in a |
| * shadow register (ConfigROMmapNext) and needs a bus reset |
| * for the changes to take place. When the bus reset is |
| * detected, the controller loads the new values for the |
| * ConfigRomHeader and BusOptions registers from the specified |
| * config rom and loads ConfigROMmap from the ConfigROMmapNext |
| * shadow register. All automatically and atomically. |
| * |
| * Now, there's a twist to this story. The automatic load of |
| * ConfigRomHeader and BusOptions doesn't honor the |
| * noByteSwapData bit, so with a be32 config rom, the |
| * controller will load be32 values in to these registers |
| * during the atomic update, even on litte endian |
| * architectures. The workaround we use is to put a 0 in the |
| * header quadlet; 0 is endian agnostic and means that the |
| * config rom isn't ready yet. In the bus reset tasklet we |
| * then set up the real values for the two registers. |
| * |
| * We use ohci->lock to avoid racing with the code that sets |
| * ohci->next_config_rom to NULL (see bus_reset_work). |
| */ |
| |
| next_config_rom = |
| dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE, |
| &next_config_rom_bus, GFP_KERNEL); |
| if (next_config_rom == NULL) |
| return -ENOMEM; |
| |
| spin_lock_irq(&ohci->lock); |
| |
| /* |
| * If there is not an already pending config_rom update, |
| * push our new allocation into the ohci->next_config_rom |
| * and then mark the local variable as null so that we |
| * won't deallocate the new buffer. |
| * |
| * OTOH, if there is a pending config_rom update, just |
| * use that buffer with the new config_rom data, and |
| * let this routine free the unused DMA allocation. |
| */ |
| |
| if (ohci->next_config_rom == NULL) { |
| ohci->next_config_rom = next_config_rom; |
| ohci->next_config_rom_bus = next_config_rom_bus; |
| next_config_rom = NULL; |
| } |
| |
| copy_config_rom(ohci->next_config_rom, config_rom, length); |
| |
| ohci->next_header = config_rom[0]; |
| ohci->next_config_rom[0] = 0; |
| |
| reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus); |
| |
| spin_unlock_irq(&ohci->lock); |
| |
| /* If we didn't use the DMA allocation, delete it. */ |
| if (next_config_rom != NULL) |
| dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, |
| next_config_rom, next_config_rom_bus); |
| |
| /* |
| * Now initiate a bus reset to have the changes take |
| * effect. We clean up the old config rom memory and DMA |
| * mappings in the bus reset tasklet, since the OHCI |
| * controller could need to access it before the bus reset |
| * takes effect. |
| */ |
| |
| fw_schedule_bus_reset(&ohci->card, true, true); |
| |
| return 0; |
| } |
| |
| static void ohci_send_request(struct fw_card *card, struct fw_packet *packet) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| |
| at_context_transmit(&ohci->at_request_ctx, packet); |
| } |
| |
| static void ohci_send_response(struct fw_card *card, struct fw_packet *packet) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| |
| at_context_transmit(&ohci->at_response_ctx, packet); |
| } |
| |
| static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| struct context *ctx = &ohci->at_request_ctx; |
| struct driver_data *driver_data = packet->driver_data; |
| int ret = -ENOENT; |
| |
| tasklet_disable(&ctx->tasklet); |
| |
| if (packet->ack != 0) |
| goto out; |
| |
| if (packet->payload_mapped) |
| dma_unmap_single(ohci->card.device, packet->payload_bus, |
| packet->payload_length, DMA_TO_DEVICE); |
| |
| log_ar_at_event(ohci, 'T', packet->speed, packet->header, 0x20); |
| driver_data->packet = NULL; |
| packet->ack = RCODE_CANCELLED; |
| packet->callback(packet, &ohci->card, packet->ack); |
| ret = 0; |
| out: |
| tasklet_enable(&ctx->tasklet); |
| |
| return ret; |
| } |
| |
| static int ohci_enable_phys_dma(struct fw_card *card, |
| int node_id, int generation) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| unsigned long flags; |
| int n, ret = 0; |
| |
| if (param_remote_dma) |
| return 0; |
| |
| /* |
| * FIXME: Make sure this bitmask is cleared when we clear the busReset |
| * interrupt bit. Clear physReqResourceAllBuses on bus reset. |
| */ |
| |
| spin_lock_irqsave(&ohci->lock, flags); |
| |
| if (ohci->generation != generation) { |
| ret = -ESTALE; |
| goto out; |
| } |
| |
| /* |
| * Note, if the node ID contains a non-local bus ID, physical DMA is |
| * enabled for _all_ nodes on remote buses. |
| */ |
| |
| n = (node_id & 0xffc0) == LOCAL_BUS ? node_id & 0x3f : 63; |
| if (n < 32) |
| reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 1 << n); |
| else |
| reg_write(ohci, OHCI1394_PhyReqFilterHiSet, 1 << (n - 32)); |
| |
| flush_writes(ohci); |
| out: |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| |
| return ret; |
| } |
| |
| static u32 ohci_read_csr(struct fw_card *card, int csr_offset) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| unsigned long flags; |
| u32 value; |
| |
| switch (csr_offset) { |
| case CSR_STATE_CLEAR: |
| case CSR_STATE_SET: |
| if (ohci->is_root && |
| (reg_read(ohci, OHCI1394_LinkControlSet) & |
| OHCI1394_LinkControl_cycleMaster)) |
| value = CSR_STATE_BIT_CMSTR; |
| else |
| value = 0; |
| if (ohci->csr_state_setclear_abdicate) |
| value |= CSR_STATE_BIT_ABDICATE; |
| |
| return value; |
| |
| case CSR_NODE_IDS: |
| return reg_read(ohci, OHCI1394_NodeID) << 16; |
| |
| case CSR_CYCLE_TIME: |
| return get_cycle_time(ohci); |
| |
| case CSR_BUS_TIME: |
| /* |
| * We might be called just after the cycle timer has wrapped |
| * around but just before the cycle64Seconds handler, so we |
| * better check here, too, if the bus time needs to be updated. |
| */ |
| spin_lock_irqsave(&ohci->lock, flags); |
| value = update_bus_time(ohci); |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| return value; |
| |
| case CSR_BUSY_TIMEOUT: |
| value = reg_read(ohci, OHCI1394_ATRetries); |
| return (value >> 4) & 0x0ffff00f; |
| |
| case CSR_PRIORITY_BUDGET: |
| return (reg_read(ohci, OHCI1394_FairnessControl) & 0x3f) | |
| (ohci->pri_req_max << 8); |
| |
| default: |
| WARN_ON(1); |
| return 0; |
| } |
| } |
| |
| static void ohci_write_csr(struct fw_card *card, int csr_offset, u32 value) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| unsigned long flags; |
| |
| switch (csr_offset) { |
| case CSR_STATE_CLEAR: |
| if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) { |
| reg_write(ohci, OHCI1394_LinkControlClear, |
| OHCI1394_LinkControl_cycleMaster); |
| flush_writes(ohci); |
| } |
| if (value & CSR_STATE_BIT_ABDICATE) |
| ohci->csr_state_setclear_abdicate = false; |
| break; |
| |
| case CSR_STATE_SET: |
| if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) { |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_cycleMaster); |
| flush_writes(ohci); |
| } |
| if (value & CSR_STATE_BIT_ABDICATE) |
| ohci->csr_state_setclear_abdicate = true; |
| break; |
| |
| case CSR_NODE_IDS: |
| reg_write(ohci, OHCI1394_NodeID, value >> 16); |
| flush_writes(ohci); |
| break; |
| |
| case CSR_CYCLE_TIME: |
| reg_write(ohci, OHCI1394_IsochronousCycleTimer, value); |
| reg_write(ohci, OHCI1394_IntEventSet, |
| OHCI1394_cycleInconsistent); |
| flush_writes(ohci); |
| break; |
| |
| case CSR_BUS_TIME: |
| spin_lock_irqsave(&ohci->lock, flags); |
| ohci->bus_time = (update_bus_time(ohci) & 0x40) | |
| (value & ~0x7f); |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| break; |
| |
| case CSR_BUSY_TIMEOUT: |
| value = (value & 0xf) | ((value & 0xf) << 4) | |
| ((value & 0xf) << 8) | ((value & 0x0ffff000) << 4); |
| reg_write(ohci, OHCI1394_ATRetries, value); |
| flush_writes(ohci); |
| break; |
| |
| case CSR_PRIORITY_BUDGET: |
| reg_write(ohci, OHCI1394_FairnessControl, value & 0x3f); |
| flush_writes(ohci); |
| break; |
| |
| default: |
| WARN_ON(1); |
| break; |
| } |
| } |
| |
| static void flush_iso_completions(struct iso_context *ctx) |
| { |
| ctx->base.callback.sc(&ctx->base, ctx->last_timestamp, |
| ctx->header_length, ctx->header, |
| ctx->base.callback_data); |
| ctx->header_length = 0; |
| } |
| |
| static void copy_iso_headers(struct iso_context *ctx, const u32 *dma_hdr) |
| { |
| u32 *ctx_hdr; |
| |
| if (ctx->header_length + ctx->base.header_size > PAGE_SIZE) { |
| if (ctx->base.drop_overflow_headers) |
| return; |
| flush_iso_completions(ctx); |
| } |
| |
| ctx_hdr = ctx->header + ctx->header_length; |
| ctx->last_timestamp = (u16)le32_to_cpu((__force __le32)dma_hdr[0]); |
| |
| /* |
| * The two iso header quadlets are byteswapped to little |
| * endian by the controller, but we want to present them |
| * as big endian for consistency with the bus endianness. |
| */ |
| if (ctx->base.header_size > 0) |
| ctx_hdr[0] = swab32(dma_hdr[1]); /* iso packet header */ |
| if (ctx->base.header_size > 4) |
| ctx_hdr[1] = swab32(dma_hdr[0]); /* timestamp */ |
| if (ctx->base.header_size > 8) |
| memcpy(&ctx_hdr[2], &dma_hdr[2], ctx->base.header_size - 8); |
| ctx->header_length += ctx->base.header_size; |
| } |
| |
| static int handle_ir_packet_per_buffer(struct context *context, |
| struct descriptor *d, |
| struct descriptor *last) |
| { |
| struct iso_context *ctx = |
| container_of(context, struct iso_context, context); |
| struct descriptor *pd; |
| u32 buffer_dma; |
| |
| for (pd = d; pd <= last; pd++) |
| if (pd->transfer_status) |
| break; |
| if (pd > last) |
| /* Descriptor(s) not done yet, stop iteration */ |
| return 0; |
| |
| while (!(d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))) { |
| d++; |
| buffer_dma = le32_to_cpu(d->data_address); |
| dma_sync_single_range_for_cpu(context->ohci->card.device, |
| buffer_dma & PAGE_MASK, |
| buffer_dma & ~PAGE_MASK, |
| le16_to_cpu(d->req_count), |
| DMA_FROM_DEVICE); |
| } |
| |
| copy_iso_headers(ctx, (u32 *) (last + 1)); |
| |
| if (last->control & cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS)) |
| flush_iso_completions(ctx); |
| |
| return 1; |
| } |
| |
| /* d == last because each descriptor block is only a single descriptor. */ |
| static int handle_ir_buffer_fill(struct context *context, |
| struct descriptor *d, |
| struct descriptor *last) |
| { |
| struct iso_context *ctx = |
| container_of(context, struct iso_context, context); |
| unsigned int req_count, res_count, completed; |
| u32 buffer_dma; |
| |
| req_count = le16_to_cpu(last->req_count); |
| res_count = le16_to_cpu(ACCESS_ONCE(last->res_count)); |
| completed = req_count - res_count; |
| buffer_dma = le32_to_cpu(last->data_address); |
| |
| if (completed > 0) { |
| ctx->mc_buffer_bus = buffer_dma; |
| ctx->mc_completed = completed; |
| } |
| |
| if (res_count != 0) |
| /* Descriptor(s) not done yet, stop iteration */ |
| return 0; |
| |
| dma_sync_single_range_for_cpu(context->ohci->card.device, |
| buffer_dma & PAGE_MASK, |
| buffer_dma & ~PAGE_MASK, |
| completed, DMA_FROM_DEVICE); |
| |
| if (last->control & cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS)) { |
| ctx->base.callback.mc(&ctx->base, |
| buffer_dma + completed, |
| ctx->base.callback_data); |
| ctx->mc_completed = 0; |
| } |
| |
| return 1; |
| } |
| |
| static void flush_ir_buffer_fill(struct iso_context *ctx) |
| { |
| dma_sync_single_range_for_cpu(ctx->context.ohci->card.device, |
| ctx->mc_buffer_bus & PAGE_MASK, |
| ctx->mc_buffer_bus & ~PAGE_MASK, |
| ctx->mc_completed, DMA_FROM_DEVICE); |
| |
| ctx->base.callback.mc(&ctx->base, |
| ctx->mc_buffer_bus + ctx->mc_completed, |
| ctx->base.callback_data); |
| ctx->mc_completed = 0; |
| } |
| |
| static inline void sync_it_packet_for_cpu(struct context *context, |
| struct descriptor *pd) |
| { |
| __le16 control; |
| u32 buffer_dma; |
| |
| /* only packets beginning with OUTPUT_MORE* have data buffers */ |
| if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS)) |
| return; |
| |
| /* skip over the OUTPUT_MORE_IMMEDIATE descriptor */ |
| pd += 2; |
| |
| /* |
| * If the packet has a header, the first OUTPUT_MORE/LAST descriptor's |
| * data buffer is in the context program's coherent page and must not |
| * be synced. |
| */ |
| if ((le32_to_cpu(pd->data_address) & PAGE_MASK) == |
| (context->current_bus & PAGE_MASK)) { |
| if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS)) |
| return; |
| pd++; |
| } |
| |
| do { |
| buffer_dma = le32_to_cpu(pd->data_address); |
| dma_sync_single_range_for_cpu(context->ohci->card.device, |
| buffer_dma & PAGE_MASK, |
| buffer_dma & ~PAGE_MASK, |
| le16_to_cpu(pd->req_count), |
| DMA_TO_DEVICE); |
| control = pd->control; |
| pd++; |
| } while (!(control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))); |
| } |
| |
| static int handle_it_packet(struct context *context, |
| struct descriptor *d, |
| struct descriptor *last) |
| { |
| struct iso_context *ctx = |
| container_of(context, struct iso_context, context); |
| struct descriptor *pd; |
| __be32 *ctx_hdr; |
| |
| for (pd = d; pd <= last; pd++) |
| if (pd->transfer_status) |
| break; |
| if (pd > last) |
| /* Descriptor(s) not done yet, stop iteration */ |
| return 0; |
| |
| sync_it_packet_for_cpu(context, d); |
| |
| if (ctx->header_length + 4 > PAGE_SIZE) { |
| if (ctx->base.drop_overflow_headers) |
| return 1; |
| flush_iso_completions(ctx); |
| } |
| |
| ctx_hdr = ctx->header + ctx->header_length; |
| ctx->last_timestamp = le16_to_cpu(last->res_count); |
| /* Present this value as big-endian to match the receive code */ |
| *ctx_hdr = cpu_to_be32((le16_to_cpu(pd->transfer_status) << 16) | |
| le16_to_cpu(pd->res_count)); |
| ctx->header_length += 4; |
| |
| if (last->control & cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS)) |
| flush_iso_completions(ctx); |
| |
| return 1; |
| } |
| |
| static void set_multichannel_mask(struct fw_ohci *ohci, u64 channels) |
| { |
| u32 hi = channels >> 32, lo = channels; |
| |
| reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, ~hi); |
| reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, ~lo); |
| reg_write(ohci, OHCI1394_IRMultiChanMaskHiSet, hi); |
| reg_write(ohci, OHCI1394_IRMultiChanMaskLoSet, lo); |
| mmiowb(); |
| ohci->mc_channels = channels; |
| } |
| |
| static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card, |
| int type, int channel, size_t header_size) |
| { |
| struct fw_ohci *ohci = fw_ohci(card); |
| struct iso_context *uninitialized_var(ctx); |
| descriptor_callback_t uninitialized_var(callback); |
| u64 *uninitialized_var(channels); |
| u32 *uninitialized_var(mask), uninitialized_var(regs); |
| int index, ret = -EBUSY; |
| |
| spin_lock_irq(&ohci->lock); |
| |
| switch (type) { |
| case FW_ISO_CONTEXT_TRANSMIT: |
| mask = &ohci->it_context_mask; |
| callback = handle_it_packet; |
| index = ffs(*mask) - 1; |
| if (index >= 0) { |
| *mask &= ~(1 << index); |
| regs = OHCI1394_IsoXmitContextBase(index); |
| ctx = &ohci->it_context_list[index]; |
| } |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE: |
| channels = &ohci->ir_context_channels; |
| mask = &ohci->ir_context_mask; |
| callback = handle_ir_packet_per_buffer; |
| index = *channels & 1ULL << channel ? ffs(*mask) - 1 : -1; |
| if (index >= 0) { |
| *channels &= ~(1ULL << channel); |
| *mask &= ~(1 << index); |
| regs = OHCI1394_IsoRcvContextBase(index); |
| ctx = &ohci->ir_context_list[index]; |
| } |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| mask = &ohci->ir_context_mask; |
| callback = handle_ir_buffer_fill; |
| index = !ohci->mc_allocated ? ffs(*mask) - 1 : -1; |
| if (index >= 0) { |
| ohci->mc_allocated = true; |
| *mask &= ~(1 << index); |
| regs = OHCI1394_IsoRcvContextBase(index); |
| ctx = &ohci->ir_context_list[index]; |
| } |
| break; |
| |
| default: |
| index = -1; |
| ret = -ENOSYS; |
| } |
| |
| spin_unlock_irq(&ohci->lock); |
| |
| if (index < 0) |
| return ERR_PTR(ret); |
| |
| memset(ctx, 0, sizeof(*ctx)); |
| ctx->header_length = 0; |
| ctx->header = (void *) __get_free_page(GFP_KERNEL); |
| if (ctx->header == NULL) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| ret = context_init(&ctx->context, ohci, regs, callback); |
| if (ret < 0) |
| goto out_with_header; |
| |
| if (type == FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL) { |
| set_multichannel_mask(ohci, 0); |
| ctx->mc_completed = 0; |
| } |
| |
| return &ctx->base; |
| |
| out_with_header: |
| free_page((unsigned long)ctx->header); |
| out: |
| spin_lock_irq(&ohci->lock); |
| |
| switch (type) { |
| case FW_ISO_CONTEXT_RECEIVE: |
| *channels |= 1ULL << channel; |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| ohci->mc_allocated = false; |
| break; |
| } |
| *mask |= 1 << index; |
| |
| spin_unlock_irq(&ohci->lock); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static int ohci_start_iso(struct fw_iso_context *base, |
| s32 cycle, u32 sync, u32 tags) |
| { |
| struct iso_context *ctx = container_of(base, struct iso_context, base); |
| struct fw_ohci *ohci = ctx->context.ohci; |
| u32 control = IR_CONTEXT_ISOCH_HEADER, match; |
| int index; |
| |
| /* the controller cannot start without any queued packets */ |
| if (ctx->context.last->branch_address == 0) |
| return -ENODATA; |
| |
| switch (ctx->base.type) { |
| case FW_ISO_CONTEXT_TRANSMIT: |
| index = ctx - ohci->it_context_list; |
| match = 0; |
| if (cycle >= 0) |
| match = IT_CONTEXT_CYCLE_MATCH_ENABLE | |
| (cycle & 0x7fff) << 16; |
| |
| reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 1 << index); |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index); |
| context_run(&ctx->context, match); |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| control |= IR_CONTEXT_BUFFER_FILL|IR_CONTEXT_MULTI_CHANNEL_MODE; |
| /* fall through */ |
| case FW_ISO_CONTEXT_RECEIVE: |
| index = ctx - ohci->ir_context_list; |
| match = (tags << 28) | (sync << 8) | ctx->base.channel; |
| if (cycle >= 0) { |
| match |= (cycle & 0x07fff) << 12; |
| control |= IR_CONTEXT_CYCLE_MATCH_ENABLE; |
| } |
| |
| reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 1 << index); |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << index); |
| reg_write(ohci, CONTEXT_MATCH(ctx->context.regs), match); |
| context_run(&ctx->context, control); |
| |
| ctx->sync = sync; |
| ctx->tags = tags; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int ohci_stop_iso(struct fw_iso_context *base) |
| { |
| struct fw_ohci *ohci = fw_ohci(base->card); |
| struct iso_context *ctx = container_of(base, struct iso_context, base); |
| int index; |
| |
| switch (ctx->base.type) { |
| case FW_ISO_CONTEXT_TRANSMIT: |
| index = ctx - ohci->it_context_list; |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index); |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE: |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| index = ctx - ohci->ir_context_list; |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index); |
| break; |
| } |
| flush_writes(ohci); |
| context_stop(&ctx->context); |
| tasklet_kill(&ctx->context.tasklet); |
| |
| return 0; |
| } |
| |
| static void ohci_free_iso_context(struct fw_iso_context *base) |
| { |
| struct fw_ohci *ohci = fw_ohci(base->card); |
| struct iso_context *ctx = container_of(base, struct iso_context, base); |
| unsigned long flags; |
| int index; |
| |
| ohci_stop_iso(base); |
| context_release(&ctx->context); |
| free_page((unsigned long)ctx->header); |
| |
| spin_lock_irqsave(&ohci->lock, flags); |
| |
| switch (base->type) { |
| case FW_ISO_CONTEXT_TRANSMIT: |
| index = ctx - ohci->it_context_list; |
| ohci->it_context_mask |= 1 << index; |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE: |
| index = ctx - ohci->ir_context_list; |
| ohci->ir_context_mask |= 1 << index; |
| ohci->ir_context_channels |= 1ULL << base->channel; |
| break; |
| |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| index = ctx - ohci->ir_context_list; |
| ohci->ir_context_mask |= 1 << index; |
| ohci->ir_context_channels |= ohci->mc_channels; |
| ohci->mc_channels = 0; |
| ohci->mc_allocated = false; |
| break; |
| } |
| |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| } |
| |
| static int ohci_set_iso_channels(struct fw_iso_context *base, u64 *channels) |
| { |
| struct fw_ohci *ohci = fw_ohci(base->card); |
| unsigned long flags; |
| int ret; |
| |
| switch (base->type) { |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| |
| spin_lock_irqsave(&ohci->lock, flags); |
| |
| /* Don't allow multichannel to grab other contexts' channels. */ |
| if (~ohci->ir_context_channels & ~ohci->mc_channels & *channels) { |
| *channels = ohci->ir_context_channels; |
| ret = -EBUSY; |
| } else { |
| set_multichannel_mask(ohci, *channels); |
| ret = 0; |
| } |
| |
| spin_unlock_irqrestore(&ohci->lock, flags); |
| |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static void ohci_resume_iso_dma(struct fw_ohci *ohci) |
| { |
| int i; |
| struct iso_context *ctx; |
| |
| for (i = 0 ; i < ohci->n_ir ; i++) { |
| ctx = &ohci->ir_context_list[i]; |
| if (ctx->context.running) |
| ohci_start_iso(&ctx->base, 0, ctx->sync, ctx->tags); |
| } |
| |
| for (i = 0 ; i < ohci->n_it ; i++) { |
| ctx = &ohci->it_context_list[i]; |
| if (ctx->context.running) |
| ohci_start_iso(&ctx->base, 0, ctx->sync, ctx->tags); |
| } |
| } |
| #endif |
| |
| static int queue_iso_transmit(struct iso_context *ctx, |
| struct fw_iso_packet *packet, |
| struct fw_iso_buffer *buffer, |
| unsigned long payload) |
| { |
| struct descriptor *d, *last, *pd; |
| struct fw_iso_packet *p; |
| __le32 *header; |
| dma_addr_t d_bus, page_bus; |
| u32 z, header_z, payload_z, irq; |
| u32 payload_index, payload_end_index, next_page_index; |
| int page, end_page, i, length, offset; |
| |
| p = packet; |
| payload_index = payload; |
| |
| if (p->skip) |
| z = 1; |
| else |
| z = 2; |
| if (p->header_length > 0) |
| z++; |
| |
| /* Determine the first page the payload isn't contained in. */ |
| end_page = PAGE_ALIGN(payload_index + p->payload_length) >> PAGE_SHIFT; |
| if (p->payload_length > 0) |
| payload_z = end_page - (payload_index >> PAGE_SHIFT); |
| else |
| payload_z = 0; |
| |
| z += payload_z; |
| |
| /* Get header size in number of descriptors. */ |
| header_z = DIV_ROUND_UP(p->header_length, sizeof(*d)); |
| |
| d = context_get_descriptors(&ctx->context, z + header_z, &d_bus); |
| if (d == NULL) |
| return -ENOMEM; |
| |
| if (!p->skip) { |
| d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE); |
| d[0].req_count = cpu_to_le16(8); |
| /* |
| * Link the skip address to this descriptor itself. This causes |
| * a context to skip a cycle whenever lost cycles or FIFO |
| * overruns occur, without dropping the data. The application |
| * should then decide whether this is an error condition or not. |
| * FIXME: Make the context's cycle-lost behaviour configurable? |
| */ |
| d[0].branch_address = cpu_to_le32(d_bus | z); |
| |
| header = (__le32 *) &d[1]; |
| header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) | |
| IT_HEADER_TAG(p->tag) | |
| IT_HEADER_TCODE(TCODE_STREAM_DATA) | |
| IT_HEADER_CHANNEL(ctx->base.channel) | |
| IT_HEADER_SPEED(ctx->base.speed)); |
| header[1] = |
| cpu_to_le32(IT_HEADER_DATA_LENGTH(p->header_length + |
| p->payload_length)); |
| } |
| |
| if (p->header_length > 0) { |
| d[2].req_count = cpu_to_le16(p->header_length); |
| d[2].data_address = cpu_to_le32(d_bus + z * sizeof(*d)); |
| memcpy(&d[z], p->header, p->header_length); |
| } |
| |
| pd = d + z - payload_z; |
| payload_end_index = payload_index + p->payload_length; |
| for (i = 0; i < payload_z; i++) { |
| page = payload_index >> PAGE_SHIFT; |
| offset = payload_index & ~PAGE_MASK; |
| next_page_index = (page + 1) << PAGE_SHIFT; |
| length = |
| min(next_page_index, payload_end_index) - payload_index; |
| pd[i].req_count = cpu_to_le16(length); |
| |
| page_bus = page_private(buffer->pages[page]); |
| pd[i].data_address = cpu_to_le32(page_bus + offset); |
| |
| dma_sync_single_range_for_device(ctx->context.ohci->card.device, |
| page_bus, offset, length, |
| DMA_TO_DEVICE); |
| |
| payload_index += length; |
| } |
| |
| if (p->interrupt) |
| irq = DESCRIPTOR_IRQ_ALWAYS; |
| else |
| irq = DESCRIPTOR_NO_IRQ; |
| |
| last = z == 2 ? d : d + z - 1; |
| last->control |= cpu_to_le16(DESCRIPTOR_OUTPUT_LAST | |
| DESCRIPTOR_STATUS | |
| DESCRIPTOR_BRANCH_ALWAYS | |
| irq); |
| |
| context_append(&ctx->context, d, z, header_z); |
| |
| return 0; |
| } |
| |
| static int queue_iso_packet_per_buffer(struct iso_context *ctx, |
| struct fw_iso_packet *packet, |
| struct fw_iso_buffer *buffer, |
| unsigned long payload) |
| { |
| struct device *device = ctx->context.ohci->card.device; |
| struct descriptor *d, *pd; |
| dma_addr_t d_bus, page_bus; |
| u32 z, header_z, rest; |
| int i, j, length; |
| int page, offset, packet_count, header_size, payload_per_buffer; |
| |
| /* |
| * The OHCI controller puts the isochronous header and trailer in the |
| * buffer, so we need at least 8 bytes. |
| */ |
| packet_count = packet->header_length / ctx->base.header_size; |
| header_size = max(ctx->base.header_size, (size_t)8); |
| |
| /* Get header size in number of descriptors. */ |
| header_z = DIV_ROUND_UP(header_size, sizeof(*d)); |
| page = payload >> PAGE_SHIFT; |
| offset = payload & ~PAGE_MASK; |
| payload_per_buffer = packet->payload_length / packet_count; |
| |
| for (i = 0; i < packet_count; i++) { |
| /* d points to the header descriptor */ |
| z = DIV_ROUND_UP(payload_per_buffer + offset, PAGE_SIZE) + 1; |
| d = context_get_descriptors(&ctx->context, |
| z + header_z, &d_bus); |
| if (d == NULL) |
| return -ENOMEM; |
| |
| d->control = cpu_to_le16(DESCRIPTOR_STATUS | |
| DESCRIPTOR_INPUT_MORE); |
| if (packet->skip && i == 0) |
| d->control |= cpu_to_le16(DESCRIPTOR_WAIT); |
| d->req_count = cpu_to_le16(header_size); |
| d->res_count = d->req_count; |
| d->transfer_status = 0; |
| d->data_address = cpu_to_le32(d_bus + (z * sizeof(*d))); |
| |
| rest = payload_per_buffer; |
| pd = d; |
| for (j = 1; j < z; j++) { |
| pd++; |
| pd->control = cpu_to_le16(DESCRIPTOR_STATUS | |
| DESCRIPTOR_INPUT_MORE); |
| |
| if (offset + rest < PAGE_SIZE) |
| length = rest; |
| else |
| length = PAGE_SIZE - offset; |
| pd->req_count = cpu_to_le16(length); |
| pd->res_count = pd->req_count; |
| pd->transfer_status = 0; |
| |
| page_bus = page_private(buffer->pages[page]); |
| pd->data_address = cpu_to_le32(page_bus + offset); |
| |
| dma_sync_single_range_for_device(device, page_bus, |
| offset, length, |
| DMA_FROM_DEVICE); |
| |
| offset = (offset + length) & ~PAGE_MASK; |
| rest -= length; |
| if (offset == 0) |
| page++; |
| } |
| pd->control = cpu_to_le16(DESCRIPTOR_STATUS | |
| DESCRIPTOR_INPUT_LAST | |
| DESCRIPTOR_BRANCH_ALWAYS); |
| if (packet->interrupt && i == packet_count - 1) |
| pd->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS); |
| |
| context_append(&ctx->context, d, z, header_z); |
| } |
| |
| return 0; |
| } |
| |
| static int queue_iso_buffer_fill(struct iso_context *ctx, |
| struct fw_iso_packet *packet, |
| struct fw_iso_buffer *buffer, |
| unsigned long payload) |
| { |
| struct descriptor *d; |
| dma_addr_t d_bus, page_bus; |
| int page, offset, rest, z, i, length; |
| |
| page = payload >> PAGE_SHIFT; |
| offset = payload & ~PAGE_MASK; |
| rest = packet->payload_length; |
| |
| /* We need one descriptor for each page in the buffer. */ |
| z = DIV_ROUND_UP(offset + rest, PAGE_SIZE); |
| |
| if (WARN_ON(offset & 3 || rest & 3 || page + z > buffer->page_count)) |
| return -EFAULT; |
| |
| for (i = 0; i < z; i++) { |
| d = context_get_descriptors(&ctx->context, 1, &d_bus); |
| if (d == NULL) |
| return -ENOMEM; |
| |
| d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | |
| DESCRIPTOR_BRANCH_ALWAYS); |
| if (packet->skip && i == 0) |
| d->control |= cpu_to_le16(DESCRIPTOR_WAIT); |
| if (packet->interrupt && i == z - 1) |
| d->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS); |
| |
| if (offset + rest < PAGE_SIZE) |
| length = rest; |
| else |
| length = PAGE_SIZE - offset; |
| d->req_count = cpu_to_le16(length); |
| d->res_count = d->req_count; |
| d->transfer_status = 0; |
| |
| page_bus = page_private(buffer->pages[page]); |
| d->data_address = cpu_to_le32(page_bus + offset); |
| |
| dma_sync_single_range_for_device(ctx->context.ohci->card.device, |
| page_bus, offset, length, |
| DMA_FROM_DEVICE); |
| |
| rest -= length; |
| offset = 0; |
| page++; |
| |
| context_append(&ctx->context, d, 1, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int ohci_queue_iso(struct fw_iso_context *base, |
| struct fw_iso_packet *packet, |
| struct fw_iso_buffer *buffer, |
| unsigned long payload) |
| { |
| struct iso_context *ctx = container_of(base, struct iso_context, base); |
| unsigned long flags; |
| int ret = -ENOSYS; |
| |
| spin_lock_irqsave(&ctx->context.ohci->lock, flags); |
| switch (base->type) { |
| case FW_ISO_CONTEXT_TRANSMIT: |
| ret = queue_iso_transmit(ctx, packet, buffer, payload); |
| break; |
| case FW_ISO_CONTEXT_RECEIVE: |
| ret = queue_iso_packet_per_buffer(ctx, packet, buffer, payload); |
| break; |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| ret = queue_iso_buffer_fill(ctx, packet, buffer, payload); |
| break; |
| } |
| spin_unlock_irqrestore(&ctx->context.ohci->lock, flags); |
| |
| return ret; |
| } |
| |
| static void ohci_flush_queue_iso(struct fw_iso_context *base) |
| { |
| struct context *ctx = |
| &container_of(base, struct iso_context, base)->context; |
| |
| reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE); |
| } |
| |
| static int ohci_flush_iso_completions(struct fw_iso_context *base) |
| { |
| struct iso_context *ctx = container_of(base, struct iso_context, base); |
| int ret = 0; |
| |
| tasklet_disable(&ctx->context.tasklet); |
| |
| if (!test_and_set_bit_lock(0, &ctx->flushing_completions)) { |
| context_tasklet((unsigned long)&ctx->context); |
| |
| switch (base->type) { |
| case FW_ISO_CONTEXT_TRANSMIT: |
| case FW_ISO_CONTEXT_RECEIVE: |
| if (ctx->header_length != 0) |
| flush_iso_completions(ctx); |
| break; |
| case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL: |
| if (ctx->mc_completed != 0) |
| flush_ir_buffer_fill(ctx); |
| break; |
| default: |
| ret = -ENOSYS; |
| } |
| |
| clear_bit_unlock(0, &ctx->flushing_completions); |
| smp_mb__after_atomic(); |
| } |
| |
| tasklet_enable(&ctx->context.tasklet); |
| |
| return ret; |
| } |
| |
| static const struct fw_card_driver ohci_driver = { |
| .enable = ohci_enable, |
| .read_phy_reg = ohci_read_phy_reg, |
| .update_phy_reg = ohci_update_phy_reg, |
| .set_config_rom = ohci_set_config_rom, |
| .send_request = ohci_send_request, |
| .send_response = ohci_send_response, |
| .cancel_packet = ohci_cancel_packet, |
| .enable_phys_dma = ohci_enable_phys_dma, |
| .read_csr = ohci_read_csr, |
| .write_csr = ohci_write_csr, |
| |
| .allocate_iso_context = ohci_allocate_iso_context, |
| .free_iso_context = ohci_free_iso_context, |
| .set_iso_channels = ohci_set_iso_channels, |
| .queue_iso = ohci_queue_iso, |
| .flush_queue_iso = ohci_flush_queue_iso, |
| .flush_iso_completions = ohci_flush_iso_completions, |
| .start_iso = ohci_start_iso, |
| .stop_iso = ohci_stop_iso, |
| }; |
| |
| #ifdef CONFIG_PPC_PMAC |
| static void pmac_ohci_on(struct pci_dev *dev) |
| { |
| if (machine_is(powermac)) { |
| struct device_node *ofn = pci_device_to_OF_node(dev); |
| |
| if (ofn) { |
| pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1); |
| pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1); |
| } |
| } |
| } |
| |
| static void pmac_ohci_off(struct pci_dev *dev) |
| { |
| if (machine_is(powermac)) { |
| struct device_node *ofn = pci_device_to_OF_node(dev); |
| |
| if (ofn) { |
| pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0); |
| pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0); |
| } |
| } |
| } |
| #else |
| static inline void pmac_ohci_on(struct pci_dev *dev) {} |
| static inline void pmac_ohci_off(struct pci_dev *dev) {} |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| static int pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| struct fw_ohci *ohci; |
| u32 bus_options, max_receive, link_speed, version; |
| u64 guid; |
| int i, err; |
| size_t size; |
| |
| if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) { |
| dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n"); |
| return -ENOSYS; |
| } |
| |
| ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); |
| if (ohci == NULL) { |
| err = -ENOMEM; |
| goto fail; |
| } |
| |
| fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev); |
| |
| pmac_ohci_on(dev); |
| |
| err = pci_enable_device(dev); |
| if (err) { |
| dev_err(&dev->dev, "failed to enable OHCI hardware\n"); |
| goto fail_free; |
| } |
| |
| pci_set_master(dev); |
| pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0); |
| pci_set_drvdata(dev, ohci); |
| |
| spin_lock_init(&ohci->lock); |
| mutex_init(&ohci->phy_reg_mutex); |
| |
| INIT_WORK(&ohci->bus_reset_work, bus_reset_work); |
| |
| if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM) || |
| pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE) { |
| ohci_err(ohci, "invalid MMIO resource\n"); |
| err = -ENXIO; |
| goto fail_disable; |
| } |
| |
| err = pci_request_region(dev, 0, ohci_driver_name); |
| if (err) { |
| ohci_err(ohci, "MMIO resource unavailable\n"); |
| goto fail_disable; |
| } |
| |
| ohci->registers = pci_iomap(dev, 0, OHCI1394_REGISTER_SIZE); |
| if (ohci->registers == NULL) { |
| ohci_err(ohci, "failed to remap registers\n"); |
| err = -ENXIO; |
| goto fail_iomem; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(ohci_quirks); i++) |
| if ((ohci_quirks[i].vendor == dev->vendor) && |
| (ohci_quirks[i].device == (unsigned short)PCI_ANY_ID || |
| ohci_quirks[i].device == dev->device) && |
| (ohci_quirks[i].revision == (unsigned short)PCI_ANY_ID || |
| ohci_quirks[i].revision >= dev->revision)) { |
| ohci->quirks = ohci_quirks[i].flags; |
| break; |
| } |
| if (param_quirks) |
| ohci->quirks = param_quirks; |
| |
| /* |
| * Because dma_alloc_coherent() allocates at least one page, |
| * we save space by using a common buffer for the AR request/ |
| * response descriptors and the self IDs buffer. |
| */ |
| BUILD_BUG_ON(AR_BUFFERS * sizeof(struct descriptor) > PAGE_SIZE/4); |
| BUILD_BUG_ON(SELF_ID_BUF_SIZE > PAGE_SIZE/2); |
| ohci->misc_buffer = dma_alloc_coherent(ohci->card.device, |
| PAGE_SIZE, |
| &ohci->misc_buffer_bus, |
| GFP_KERNEL); |
| if (!ohci->misc_buffer) { |
| err = -ENOMEM; |
| goto fail_iounmap; |
| } |
| |
| err = ar_context_init(&ohci->ar_request_ctx, ohci, 0, |
| OHCI1394_AsReqRcvContextControlSet); |
| if (err < 0) |
| goto fail_misc_buf; |
| |
| err = ar_context_init(&ohci->ar_response_ctx, ohci, PAGE_SIZE/4, |
| OHCI1394_AsRspRcvContextControlSet); |
| if (err < 0) |
| goto fail_arreq_ctx; |
| |
| err = context_init(&ohci->at_request_ctx, ohci, |
| OHCI1394_AsReqTrContextControlSet, handle_at_packet); |
| if (err < 0) |
| goto fail_arrsp_ctx; |
| |
| err = context_init(&ohci->at_response_ctx, ohci, |
| OHCI1394_AsRspTrContextControlSet, handle_at_packet); |
| if (err < 0) |
| goto fail_atreq_ctx; |
| |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0); |
| ohci->ir_context_channels = ~0ULL; |
| ohci->ir_context_support = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet); |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0); |
| ohci->ir_context_mask = ohci->ir_context_support; |
| ohci->n_ir = hweight32(ohci->ir_context_mask); |
| size = sizeof(struct iso_context) * ohci->n_ir; |
| ohci->ir_context_list = kzalloc(size, GFP_KERNEL); |
| |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0); |
| ohci->it_context_support = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet); |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0); |
| ohci->it_context_mask = ohci->it_context_support; |
| ohci->n_it = hweight32(ohci->it_context_mask); |
| size = sizeof(struct iso_context) * ohci->n_it; |
| ohci->it_context_list = kzalloc(size, GFP_KERNEL); |
| |
| if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) { |
| err = -ENOMEM; |
| goto fail_contexts; |
| } |
| |
| ohci->self_id = ohci->misc_buffer + PAGE_SIZE/2; |
| ohci->self_id_bus = ohci->misc_buffer_bus + PAGE_SIZE/2; |
| |
| bus_options = reg_read(ohci, OHCI1394_BusOptions); |
| max_receive = (bus_options >> 12) & 0xf; |
| link_speed = bus_options & 0x7; |
| guid = ((u64) reg_read(ohci, OHCI1394_GUIDHi) << 32) | |
| reg_read(ohci, OHCI1394_GUIDLo); |
| |
| if (!(ohci->quirks & QUIRK_NO_MSI)) |
| pci_enable_msi(dev); |
| if (request_irq(dev->irq, irq_handler, |
| pci_dev_msi_enabled(dev) ? 0 : IRQF_SHARED, |
| ohci_driver_name, ohci)) { |
| ohci_err(ohci, "failed to allocate interrupt %d\n", dev->irq); |
| err = -EIO; |
| goto fail_msi; |
| } |
| |
| err = fw_card_add(&ohci->card, max_receive, link_speed, guid); |
| if (err) |
| goto fail_irq; |
| |
| version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff; |
| ohci_notice(ohci, |
| "added OHCI v%x.%x device as card %d, " |
| "%d IR + %d IT contexts, quirks 0x%x%s\n", |
| version >> 16, version & 0xff, ohci->card.index, |
| ohci->n_ir, ohci->n_it, ohci->quirks, |
| reg_read(ohci, OHCI1394_PhyUpperBound) ? |
| ", physUB" : ""); |
| |
| return 0; |
| |
| fail_irq: |
| free_irq(dev->irq, ohci); |
| fail_msi: |
| pci_disable_msi(dev); |
| fail_contexts: |
| kfree(ohci->ir_context_list); |
| kfree(ohci->it_context_list); |
| context_release(&ohci->at_response_ctx); |
| fail_atreq_ctx: |
| context_release(&ohci->at_request_ctx); |
| fail_arrsp_ctx: |
| ar_context_release(&ohci->ar_response_ctx); |
| fail_arreq_ctx: |
| ar_context_release(&ohci->ar_request_ctx); |
| fail_misc_buf: |
| dma_free_coherent(ohci->card.device, PAGE_SIZE, |
| ohci->misc_buffer, ohci->misc_buffer_bus); |
| fail_iounmap: |
| pci_iounmap(dev, ohci->registers); |
| fail_iomem: |
| pci_release_region(dev, 0); |
| fail_disable: |
| pci_disable_device(dev); |
| fail_free: |
| kfree(ohci); |
| pmac_ohci_off(dev); |
| fail: |
| return err; |
| } |
| |
| static void pci_remove(struct pci_dev *dev) |
| { |
| struct fw_ohci *ohci = pci_get_drvdata(dev); |
| |
| /* |
| * If the removal is happening from the suspend state, LPS won't be |
| * enabled and host registers (eg., IntMaskClear) won't be accessible. |
| */ |
| if (reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_LPS) { |
| reg_write(ohci, OHCI1394_IntMaskClear, ~0); |
| flush_writes(ohci); |
| } |
| cancel_work_sync(&ohci->bus_reset_work); |
| fw_core_remove_card(&ohci->card); |
| |
| /* |
| * FIXME: Fail all pending packets here, now that the upper |
| * layers can't queue any more. |
| */ |
| |
| software_reset(ohci); |
| free_irq(dev->irq, ohci); |
| |
| if (ohci->next_config_rom && ohci->next_config_rom != ohci->config_rom) |
| dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, |
| ohci->next_config_rom, ohci->next_config_rom_bus); |
| if (ohci->config_rom) |
| dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, |
| ohci->config_rom, ohci->config_rom_bus); |
| ar_context_release(&ohci->ar_request_ctx); |
| ar_context_release(&ohci->ar_response_ctx); |
| dma_free_coherent(ohci->card.device, PAGE_SIZE, |
| ohci->misc_buffer, ohci->misc_buffer_bus); |
| context_release(&ohci->at_request_ctx); |
| context_release(&ohci->at_response_ctx); |
| kfree(ohci->it_context_list); |
| kfree(ohci->ir_context_list); |
| pci_disable_msi(dev); |
| pci_iounmap(dev, ohci->registers); |
| pci_release_region(dev, 0); |
| pci_disable_device(dev); |
| kfree(ohci); |
| pmac_ohci_off(dev); |
| |
| dev_notice(&dev->dev, "removed fw-ohci device\n"); |
| } |
| |
| #ifdef CONFIG_PM |
| static int pci_suspend(struct pci_dev *dev, pm_message_t state) |
| { |
| struct fw_ohci *ohci = pci_get_drvdata(dev); |
| int err; |
| |
| software_reset(ohci); |
| err = pci_save_state(dev); |
| if (err) { |
| ohci_err(ohci, "pci_save_state failed\n"); |
| return err; |
| } |
| err = pci_set_power_state(dev, pci_choose_state(dev, state)); |
| if (err) |
| ohci_err(ohci, "pci_set_power_state failed with %d\n", err); |
| pmac_ohci_off(dev); |
| |
| return 0; |
| } |
| |
| static int pci_resume(struct pci_dev *dev) |
| { |
| struct fw_ohci *ohci = pci_get_drvdata(dev); |
| int err; |
| |
| pmac_ohci_on(dev); |
| pci_set_power_state(dev, PCI_D0); |
| pci_restore_state(dev); |
| err = pci_enable_device(dev); |
| if (err) { |
| ohci_err(ohci, "pci_enable_device failed\n"); |
| return err; |
| } |
| |
| /* Some systems don't setup GUID register on resume from ram */ |
| if (!reg_read(ohci, OHCI1394_GUIDLo) && |
| !reg_read(ohci, OHCI1394_GUIDHi)) { |
| reg_write(ohci, OHCI1394_GUIDLo, (u32)ohci->card.guid); |
| reg_write(ohci, OHCI1394_GUIDHi, (u32)(ohci->card.guid >> 32)); |
| } |
| |
| err = ohci_enable(&ohci->card, NULL, 0); |
| if (err) |
| return err; |
| |
| ohci_resume_iso_dma(ohci); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct pci_device_id pci_table[] = { |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pci_table); |
| |
| static struct pci_driver fw_ohci_pci_driver = { |
| .name = ohci_driver_name, |
| .id_table = pci_table, |
| .probe = pci_probe, |
| .remove = pci_remove, |
| #ifdef CONFIG_PM |
| .resume = pci_resume, |
| .suspend = pci_suspend, |
| #endif |
| }; |
| |
| static int __init fw_ohci_init(void) |
| { |
| selfid_workqueue = alloc_workqueue(KBUILD_MODNAME, WQ_MEM_RECLAIM, 0); |
| if (!selfid_workqueue) |
| return -ENOMEM; |
| |
| return pci_register_driver(&fw_ohci_pci_driver); |
| } |
| |
| static void __exit fw_ohci_cleanup(void) |
| { |
| pci_unregister_driver(&fw_ohci_pci_driver); |
| destroy_workqueue(selfid_workqueue); |
| } |
| |
| module_init(fw_ohci_init); |
| module_exit(fw_ohci_cleanup); |
| |
| MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>"); |
| MODULE_DESCRIPTION("Driver for PCI OHCI IEEE1394 controllers"); |
| MODULE_LICENSE("GPL"); |
| |
| /* Provide a module alias so root-on-sbp2 initrds don't break. */ |
| MODULE_ALIAS("ohci1394"); |