hwmon/w83793: Remove the description of AMDSI and update the voltage formula
Fix the driver to match the information in datasheet 1.0. AMD
SI interface is marked as reserved, computing formula for 5VDD
and 5VSB is updated.
Signed-off-by: Gong Jun <jgong@winbond.com>
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index c12ac5a..99e603a 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -117,6 +117,7 @@
/* Low Bits of Vcore A/B Vtt Read/High/Low */
static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
+static u8 scale_in_add[] = { 0, 0, 0, 0, 0, 0, 0, 150, 150, 0 };
#define W83793_REG_FAN(index) (0x23 + 2 * (index)) /* High byte */
#define W83793_REG_FAN_MIN(index) (0x90 + 2 * (index)) /* High byte */
@@ -500,7 +501,7 @@
each has 4 mode:(2 bits)
0: Stop monitor
1: Use internal temp sensor(default)
- 2: Use sensor in AMD CPU and get result by AMDSI
+ 2: Reserved
3: Use sensor in Intel CPU and get result by PECI
TR1-TR2
@@ -509,8 +510,8 @@
1: To enable temp sensors monitor
*/
-/* 0 disable, 5 AMDSI, 6 PECI */
-static u8 TO_TEMP_MODE[] = { 0, 0, 5, 6 };
+/* 0 disable, 6 PECI */
+static u8 TO_TEMP_MODE[] = { 0, 0, 0, 6 };
static ssize_t
show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
@@ -550,7 +551,7 @@
u8 val = simple_strtoul(buf, NULL, 10);
/* transform the sysfs interface values into table above */
- if ((val == 5 || val == 6) && (index < 4)) {
+ if ((val == 6) && (index < 4)) {
val -= 3;
} else if ((val == 3 && index < 4)
|| (val == 4 && index >= 4)
@@ -839,7 +840,9 @@
val <<= 2;
val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
}
- return sprintf(buf, "%d\n", val * scale_in[index]);
+ /* voltage inputs 5VDD and 5VSB needs 150mV offset */
+ val = val * scale_in[index] + scale_in_add[index];
+ return sprintf(buf, "%d\n", val);
}
static ssize_t
@@ -859,6 +862,10 @@
scale_in[index] / 2) / scale_in[index];
mutex_lock(&data->update_lock);
if (index > 2) {
+ /* fix the limit values of 5VDD and 5VSB to ALARM mechanism */
+ if (1 == nr || 2 == nr) {
+ val -= scale_in_add[index] / scale_in[index];
+ }
val = SENSORS_LIMIT(val, 0, 255);
} else {
val = SENSORS_LIMIT(val, 0, 0x3FF);