| /* |
| * Copyright 2008 Cisco Systems, Inc. All rights reserved. |
| * Copyright 2007 Nuova Systems, Inc. All rights reserved. |
| * |
| * This program is free software; you may redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| #include <linux/mempool.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/workqueue.h> |
| #include <linux/pci.h> |
| #include <linux/scatterlist.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/if_ether.h> |
| #include <linux/if_vlan.h> |
| #include <linux/delay.h> |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/fc/fc_els.h> |
| #include <scsi/fc/fc_fcoe.h> |
| #include <scsi/libfc.h> |
| #include <scsi/fc_frame.h> |
| #include "fnic_io.h" |
| #include "fnic.h" |
| |
| const char *fnic_state_str[] = { |
| [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE", |
| [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE", |
| [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE", |
| [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE", |
| }; |
| |
| static const char *fnic_ioreq_state_str[] = { |
| [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING", |
| [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING", |
| [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE", |
| [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE", |
| }; |
| |
| static const char *fcpio_status_str[] = { |
| [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/ |
| [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER", |
| [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE", |
| [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]", |
| [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED", |
| [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND", |
| [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/ |
| [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT", |
| [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID", |
| [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID", |
| [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH", |
| [FCPIO_FW_ERR] = "FCPIO_FW_ERR", |
| [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED", |
| [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED", |
| [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN", |
| [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED", |
| [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL", |
| [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED", |
| [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND", |
| }; |
| |
| const char *fnic_state_to_str(unsigned int state) |
| { |
| if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state]) |
| return "unknown"; |
| |
| return fnic_state_str[state]; |
| } |
| |
| static const char *fnic_ioreq_state_to_str(unsigned int state) |
| { |
| if (state >= ARRAY_SIZE(fnic_ioreq_state_str) || |
| !fnic_ioreq_state_str[state]) |
| return "unknown"; |
| |
| return fnic_ioreq_state_str[state]; |
| } |
| |
| static const char *fnic_fcpio_status_to_str(unsigned int status) |
| { |
| if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status]) |
| return "unknown"; |
| |
| return fcpio_status_str[status]; |
| } |
| |
| static void fnic_cleanup_io(struct fnic *fnic, int exclude_id); |
| |
| static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic, |
| struct scsi_cmnd *sc) |
| { |
| u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1); |
| |
| return &fnic->io_req_lock[hash]; |
| } |
| |
| /* |
| * Unmap the data buffer and sense buffer for an io_req, |
| * also unmap and free the device-private scatter/gather list. |
| */ |
| static void fnic_release_ioreq_buf(struct fnic *fnic, |
| struct fnic_io_req *io_req, |
| struct scsi_cmnd *sc) |
| { |
| if (io_req->sgl_list_pa) |
| pci_unmap_single(fnic->pdev, io_req->sgl_list_pa, |
| sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt, |
| PCI_DMA_TODEVICE); |
| scsi_dma_unmap(sc); |
| |
| if (io_req->sgl_cnt) |
| mempool_free(io_req->sgl_list_alloc, |
| fnic->io_sgl_pool[io_req->sgl_type]); |
| if (io_req->sense_buf_pa) |
| pci_unmap_single(fnic->pdev, io_req->sense_buf_pa, |
| SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE); |
| } |
| |
| /* Free up Copy Wq descriptors. Called with copy_wq lock held */ |
| static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq) |
| { |
| /* if no Ack received from firmware, then nothing to clean */ |
| if (!fnic->fw_ack_recd[0]) |
| return 1; |
| |
| /* |
| * Update desc_available count based on number of freed descriptors |
| * Account for wraparound |
| */ |
| if (wq->to_clean_index <= fnic->fw_ack_index[0]) |
| wq->ring.desc_avail += (fnic->fw_ack_index[0] |
| - wq->to_clean_index + 1); |
| else |
| wq->ring.desc_avail += (wq->ring.desc_count |
| - wq->to_clean_index |
| + fnic->fw_ack_index[0] + 1); |
| |
| /* |
| * just bump clean index to ack_index+1 accounting for wraparound |
| * this will essentially free up all descriptors between |
| * to_clean_index and fw_ack_index, both inclusive |
| */ |
| wq->to_clean_index = |
| (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count; |
| |
| /* we have processed the acks received so far */ |
| fnic->fw_ack_recd[0] = 0; |
| return 0; |
| } |
| |
| |
| /* |
| * fnic_fw_reset_handler |
| * Routine to send reset msg to fw |
| */ |
| int fnic_fw_reset_handler(struct fnic *fnic) |
| { |
| struct vnic_wq_copy *wq = &fnic->wq_copy[0]; |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); |
| |
| if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) |
| free_wq_copy_descs(fnic, wq); |
| |
| if (!vnic_wq_copy_desc_avail(wq)) |
| ret = -EAGAIN; |
| else |
| fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG); |
| |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); |
| |
| if (!ret) |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Issued fw reset\n"); |
| else |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Failed to issue fw reset\n"); |
| return ret; |
| } |
| |
| |
| /* |
| * fnic_flogi_reg_handler |
| * Routine to send flogi register msg to fw |
| */ |
| int fnic_flogi_reg_handler(struct fnic *fnic) |
| { |
| struct vnic_wq_copy *wq = &fnic->wq_copy[0]; |
| u8 gw_mac[ETH_ALEN]; |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); |
| |
| if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) |
| free_wq_copy_descs(fnic, wq); |
| |
| if (!vnic_wq_copy_desc_avail(wq)) { |
| ret = -EAGAIN; |
| goto flogi_reg_ioreq_end; |
| } |
| |
| if (fnic->fcoui_mode) |
| memset(gw_mac, 0xff, ETH_ALEN); |
| else |
| memcpy(gw_mac, fnic->dest_addr, ETH_ALEN); |
| |
| fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG, |
| FCPIO_FLOGI_REG_GW_DEST, |
| fnic->s_id, |
| gw_mac); |
| |
| flogi_reg_ioreq_end: |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); |
| |
| if (!ret) |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "flog reg issued\n"); |
| |
| return ret; |
| } |
| |
| /* |
| * fnic_queue_wq_copy_desc |
| * Routine to enqueue a wq copy desc |
| */ |
| static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, |
| struct vnic_wq_copy *wq, |
| struct fnic_io_req *io_req, |
| struct scsi_cmnd *sc, |
| int sg_count) |
| { |
| struct scatterlist *sg; |
| struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); |
| struct fc_rport_libfc_priv *rp = rport->dd_data; |
| struct host_sg_desc *desc; |
| u8 pri_tag = 0; |
| unsigned int i; |
| unsigned long intr_flags; |
| int flags; |
| u8 exch_flags; |
| struct scsi_lun fc_lun; |
| char msg[2]; |
| |
| if (sg_count) { |
| /* For each SGE, create a device desc entry */ |
| desc = io_req->sgl_list; |
| for_each_sg(scsi_sglist(sc), sg, sg_count, i) { |
| desc->addr = cpu_to_le64(sg_dma_address(sg)); |
| desc->len = cpu_to_le32(sg_dma_len(sg)); |
| desc->_resvd = 0; |
| desc++; |
| } |
| |
| io_req->sgl_list_pa = pci_map_single |
| (fnic->pdev, |
| io_req->sgl_list, |
| sizeof(io_req->sgl_list[0]) * sg_count, |
| PCI_DMA_TODEVICE); |
| } |
| |
| io_req->sense_buf_pa = pci_map_single(fnic->pdev, |
| sc->sense_buffer, |
| SCSI_SENSE_BUFFERSIZE, |
| PCI_DMA_FROMDEVICE); |
| |
| int_to_scsilun(sc->device->lun, &fc_lun); |
| |
| pri_tag = FCPIO_ICMND_PTA_SIMPLE; |
| msg[0] = MSG_SIMPLE_TAG; |
| scsi_populate_tag_msg(sc, msg); |
| if (msg[0] == MSG_ORDERED_TAG) |
| pri_tag = FCPIO_ICMND_PTA_ORDERED; |
| |
| /* Enqueue the descriptor in the Copy WQ */ |
| spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); |
| |
| if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) |
| free_wq_copy_descs(fnic, wq); |
| |
| if (unlikely(!vnic_wq_copy_desc_avail(wq))) { |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); |
| return SCSI_MLQUEUE_HOST_BUSY; |
| } |
| |
| flags = 0; |
| if (sc->sc_data_direction == DMA_FROM_DEVICE) |
| flags = FCPIO_ICMND_RDDATA; |
| else if (sc->sc_data_direction == DMA_TO_DEVICE) |
| flags = FCPIO_ICMND_WRDATA; |
| |
| exch_flags = 0; |
| if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) && |
| (rp->flags & FC_RP_FLAGS_RETRY)) |
| exch_flags |= FCPIO_ICMND_SRFLAG_RETRY; |
| |
| fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag, |
| 0, exch_flags, io_req->sgl_cnt, |
| SCSI_SENSE_BUFFERSIZE, |
| io_req->sgl_list_pa, |
| io_req->sense_buf_pa, |
| 0, /* scsi cmd ref, always 0 */ |
| pri_tag, /* scsi pri and tag */ |
| flags, /* command flags */ |
| sc->cmnd, scsi_bufflen(sc), |
| fc_lun.scsi_lun, io_req->port_id, |
| rport->maxframe_size, rp->r_a_tov, |
| rp->e_d_tov); |
| |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); |
| return 0; |
| } |
| |
| /* |
| * fnic_queuecommand |
| * Routine to send a scsi cdb |
| * Called with host_lock held and interrupts disabled. |
| */ |
| int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) |
| { |
| struct fc_lport *lp; |
| struct fc_rport *rport; |
| struct fnic_io_req *io_req; |
| struct fnic *fnic; |
| struct vnic_wq_copy *wq; |
| int ret; |
| int sg_count; |
| unsigned long flags; |
| unsigned long ptr; |
| |
| rport = starget_to_rport(scsi_target(sc->device)); |
| ret = fc_remote_port_chkready(rport); |
| if (ret) { |
| sc->result = ret; |
| done(sc); |
| return 0; |
| } |
| |
| lp = shost_priv(sc->device->host); |
| if (lp->state != LPORT_ST_READY || !(lp->link_up)) |
| return SCSI_MLQUEUE_HOST_BUSY; |
| |
| /* |
| * Release host lock, use driver resource specific locks from here. |
| * Don't re-enable interrupts in case they were disabled prior to the |
| * caller disabling them. |
| */ |
| spin_unlock(lp->host->host_lock); |
| |
| /* Get a new io_req for this SCSI IO */ |
| fnic = lport_priv(lp); |
| |
| io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); |
| if (!io_req) { |
| ret = SCSI_MLQUEUE_HOST_BUSY; |
| goto out; |
| } |
| memset(io_req, 0, sizeof(*io_req)); |
| |
| /* Map the data buffer */ |
| sg_count = scsi_dma_map(sc); |
| if (sg_count < 0) { |
| mempool_free(io_req, fnic->io_req_pool); |
| goto out; |
| } |
| |
| /* Determine the type of scatter/gather list we need */ |
| io_req->sgl_cnt = sg_count; |
| io_req->sgl_type = FNIC_SGL_CACHE_DFLT; |
| if (sg_count > FNIC_DFLT_SG_DESC_CNT) |
| io_req->sgl_type = FNIC_SGL_CACHE_MAX; |
| |
| if (sg_count) { |
| io_req->sgl_list = |
| mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type], |
| GFP_ATOMIC | GFP_DMA); |
| if (!io_req->sgl_list) { |
| ret = SCSI_MLQUEUE_HOST_BUSY; |
| scsi_dma_unmap(sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| goto out; |
| } |
| |
| /* Cache sgl list allocated address before alignment */ |
| io_req->sgl_list_alloc = io_req->sgl_list; |
| ptr = (unsigned long) io_req->sgl_list; |
| if (ptr % FNIC_SG_DESC_ALIGN) { |
| io_req->sgl_list = (struct host_sg_desc *) |
| (((unsigned long) ptr |
| + FNIC_SG_DESC_ALIGN - 1) |
| & ~(FNIC_SG_DESC_ALIGN - 1)); |
| } |
| } |
| |
| /* initialize rest of io_req */ |
| io_req->port_id = rport->port_id; |
| CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; |
| CMD_SP(sc) = (char *)io_req; |
| sc->scsi_done = done; |
| |
| /* create copy wq desc and enqueue it */ |
| wq = &fnic->wq_copy[0]; |
| ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count); |
| if (ret) { |
| /* |
| * In case another thread cancelled the request, |
| * refetch the pointer under the lock. |
| */ |
| spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc); |
| |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| CMD_SP(sc) = NULL; |
| CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; |
| spin_unlock_irqrestore(io_lock, flags); |
| if (io_req) { |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| } |
| } |
| out: |
| /* acquire host lock before returning to SCSI */ |
| spin_lock(lp->host->host_lock); |
| return ret; |
| } |
| |
| /* |
| * fnic_fcpio_fw_reset_cmpl_handler |
| * Routine to handle fw reset completion |
| */ |
| static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic, |
| struct fcpio_fw_req *desc) |
| { |
| u8 type; |
| u8 hdr_status; |
| struct fcpio_tag tag; |
| int ret = 0; |
| struct fc_frame *flogi; |
| unsigned long flags; |
| |
| fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); |
| |
| /* Clean up all outstanding io requests */ |
| fnic_cleanup_io(fnic, SCSI_NO_TAG); |
| |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| |
| flogi = fnic->flogi; |
| fnic->flogi = NULL; |
| |
| /* fnic should be in FC_TRANS_ETH_MODE */ |
| if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) { |
| /* Check status of reset completion */ |
| if (!hdr_status) { |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "reset cmpl success\n"); |
| /* Ready to send flogi out */ |
| fnic->state = FNIC_IN_ETH_MODE; |
| } else { |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "fnic fw_reset : failed %s\n", |
| fnic_fcpio_status_to_str(hdr_status)); |
| |
| /* |
| * Unable to change to eth mode, cannot send out flogi |
| * Change state to fc mode, so that subsequent Flogi |
| * requests from libFC will cause more attempts to |
| * reset the firmware. Free the cached flogi |
| */ |
| fnic->state = FNIC_IN_FC_MODE; |
| ret = -1; |
| } |
| } else { |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "Unexpected state %s while processing" |
| " reset cmpl\n", fnic_state_to_str(fnic->state)); |
| ret = -1; |
| } |
| |
| /* Thread removing device blocks till firmware reset is complete */ |
| if (fnic->remove_wait) |
| complete(fnic->remove_wait); |
| |
| /* |
| * If fnic is being removed, or fw reset failed |
| * free the flogi frame. Else, send it out |
| */ |
| if (fnic->remove_wait || ret) { |
| fnic->flogi_oxid = FC_XID_UNKNOWN; |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| if (flogi) |
| dev_kfree_skb_irq(fp_skb(flogi)); |
| goto reset_cmpl_handler_end; |
| } |
| |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| |
| if (flogi) |
| ret = fnic_send_frame(fnic, flogi); |
| |
| reset_cmpl_handler_end: |
| return ret; |
| } |
| |
| /* |
| * fnic_fcpio_flogi_reg_cmpl_handler |
| * Routine to handle flogi register completion |
| */ |
| static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic, |
| struct fcpio_fw_req *desc) |
| { |
| u8 type; |
| u8 hdr_status; |
| struct fcpio_tag tag; |
| int ret = 0; |
| struct fc_frame *flogi_resp = NULL; |
| unsigned long flags; |
| struct sk_buff *skb; |
| |
| fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); |
| |
| /* Update fnic state based on status of flogi reg completion */ |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| |
| flogi_resp = fnic->flogi_resp; |
| fnic->flogi_resp = NULL; |
| |
| if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) { |
| |
| /* Check flogi registration completion status */ |
| if (!hdr_status) { |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "flog reg succeeded\n"); |
| fnic->state = FNIC_IN_FC_MODE; |
| } else { |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "fnic flogi reg :failed %s\n", |
| fnic_fcpio_status_to_str(hdr_status)); |
| fnic->state = FNIC_IN_ETH_MODE; |
| ret = -1; |
| } |
| } else { |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Unexpected fnic state %s while" |
| " processing flogi reg completion\n", |
| fnic_state_to_str(fnic->state)); |
| ret = -1; |
| } |
| |
| /* Successful flogi reg cmpl, pass frame to LibFC */ |
| if (!ret && flogi_resp) { |
| if (fnic->stop_rx_link_events) { |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| goto reg_cmpl_handler_end; |
| } |
| skb = (struct sk_buff *)flogi_resp; |
| /* Use fr_flags to indicate whether flogi resp or not */ |
| fr_flags(flogi_resp) = 1; |
| fr_dev(flogi_resp) = fnic->lport; |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| |
| skb_queue_tail(&fnic->frame_queue, skb); |
| queue_work(fnic_event_queue, &fnic->frame_work); |
| |
| } else { |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| if (flogi_resp) |
| dev_kfree_skb_irq(fp_skb(flogi_resp)); |
| } |
| |
| reg_cmpl_handler_end: |
| return ret; |
| } |
| |
| static inline int is_ack_index_in_range(struct vnic_wq_copy *wq, |
| u16 request_out) |
| { |
| if (wq->to_clean_index <= wq->to_use_index) { |
| /* out of range, stale request_out index */ |
| if (request_out < wq->to_clean_index || |
| request_out >= wq->to_use_index) |
| return 0; |
| } else { |
| /* out of range, stale request_out index */ |
| if (request_out < wq->to_clean_index && |
| request_out >= wq->to_use_index) |
| return 0; |
| } |
| /* request_out index is in range */ |
| return 1; |
| } |
| |
| |
| /* |
| * Mark that ack received and store the Ack index. If there are multiple |
| * acks received before Tx thread cleans it up, the latest value will be |
| * used which is correct behavior. This state should be in the copy Wq |
| * instead of in the fnic |
| */ |
| static inline void fnic_fcpio_ack_handler(struct fnic *fnic, |
| unsigned int cq_index, |
| struct fcpio_fw_req *desc) |
| { |
| struct vnic_wq_copy *wq; |
| u16 request_out = desc->u.ack.request_out; |
| unsigned long flags; |
| |
| /* mark the ack state */ |
| wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count]; |
| spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); |
| |
| if (is_ack_index_in_range(wq, request_out)) { |
| fnic->fw_ack_index[0] = request_out; |
| fnic->fw_ack_recd[0] = 1; |
| } |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); |
| } |
| |
| /* |
| * fnic_fcpio_icmnd_cmpl_handler |
| * Routine to handle icmnd completions |
| */ |
| static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, |
| struct fcpio_fw_req *desc) |
| { |
| u8 type; |
| u8 hdr_status; |
| struct fcpio_tag tag; |
| u32 id; |
| u64 xfer_len = 0; |
| struct fcpio_icmnd_cmpl *icmnd_cmpl; |
| struct fnic_io_req *io_req; |
| struct scsi_cmnd *sc; |
| unsigned long flags; |
| spinlock_t *io_lock; |
| |
| /* Decode the cmpl description to get the io_req id */ |
| fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); |
| fcpio_tag_id_dec(&tag, &id); |
| |
| if (id >= FNIC_MAX_IO_REQ) |
| return; |
| |
| sc = scsi_host_find_tag(fnic->lport->host, id); |
| WARN_ON_ONCE(!sc); |
| if (!sc) |
| return; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| WARN_ON_ONCE(!io_req); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| return; |
| } |
| |
| /* firmware completed the io */ |
| io_req->io_completed = 1; |
| |
| /* |
| * if SCSI-ML has already issued abort on this command, |
| * ignore completion of the IO. The abts path will clean it up |
| */ |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { |
| spin_unlock_irqrestore(io_lock, flags); |
| return; |
| } |
| |
| /* Mark the IO as complete */ |
| CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; |
| |
| icmnd_cmpl = &desc->u.icmnd_cmpl; |
| |
| switch (hdr_status) { |
| case FCPIO_SUCCESS: |
| sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status; |
| xfer_len = scsi_bufflen(sc); |
| scsi_set_resid(sc, icmnd_cmpl->residual); |
| |
| if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER) |
| xfer_len -= icmnd_cmpl->residual; |
| |
| /* |
| * If queue_full, then try to reduce queue depth for all |
| * LUNS on the target. Todo: this should be accompanied |
| * by a periodic queue_depth rampup based on successful |
| * IO completion. |
| */ |
| if (icmnd_cmpl->scsi_status == QUEUE_FULL) { |
| struct scsi_device *t_sdev; |
| int qd = 0; |
| |
| shost_for_each_device(t_sdev, sc->device->host) { |
| if (t_sdev->id != sc->device->id) |
| continue; |
| |
| if (t_sdev->queue_depth > 1) { |
| qd = scsi_track_queue_full |
| (t_sdev, |
| t_sdev->queue_depth - 1); |
| if (qd == -1) |
| qd = t_sdev->host->cmd_per_lun; |
| shost_printk(KERN_INFO, |
| fnic->lport->host, |
| "scsi[%d:%d:%d:%d" |
| "] queue full detected," |
| "new depth = %d\n", |
| t_sdev->host->host_no, |
| t_sdev->channel, |
| t_sdev->id, t_sdev->lun, |
| t_sdev->queue_depth); |
| } |
| } |
| } |
| break; |
| |
| case FCPIO_TIMEOUT: /* request was timed out */ |
| sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status; |
| break; |
| |
| case FCPIO_ABORTED: /* request was aborted */ |
| sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; |
| break; |
| |
| case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */ |
| scsi_set_resid(sc, icmnd_cmpl->residual); |
| sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; |
| break; |
| |
| case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */ |
| sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status; |
| break; |
| case FCPIO_INVALID_HEADER: /* header contains invalid data */ |
| case FCPIO_INVALID_PARAM: /* some parameter in request invalid */ |
| case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */ |
| case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */ |
| case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */ |
| case FCPIO_MSS_INVALID: /* request was aborted due to mss error */ |
| case FCPIO_FW_ERR: /* request was terminated due fw error */ |
| default: |
| shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", |
| fnic_fcpio_status_to_str(hdr_status)); |
| sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; |
| break; |
| } |
| |
| /* Break link with the SCSI command */ |
| CMD_SP(sc) = NULL; |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| |
| mempool_free(io_req, fnic->io_req_pool); |
| |
| if (sc->sc_data_direction == DMA_FROM_DEVICE) { |
| fnic->lport->host_stats.fcp_input_requests++; |
| fnic->fcp_input_bytes += xfer_len; |
| } else if (sc->sc_data_direction == DMA_TO_DEVICE) { |
| fnic->lport->host_stats.fcp_output_requests++; |
| fnic->fcp_output_bytes += xfer_len; |
| } else |
| fnic->lport->host_stats.fcp_control_requests++; |
| |
| /* Call SCSI completion function to complete the IO */ |
| if (sc->scsi_done) |
| sc->scsi_done(sc); |
| |
| } |
| |
| /* fnic_fcpio_itmf_cmpl_handler |
| * Routine to handle itmf completions |
| */ |
| static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, |
| struct fcpio_fw_req *desc) |
| { |
| u8 type; |
| u8 hdr_status; |
| struct fcpio_tag tag; |
| u32 id; |
| struct scsi_cmnd *sc; |
| struct fnic_io_req *io_req; |
| unsigned long flags; |
| spinlock_t *io_lock; |
| |
| fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); |
| fcpio_tag_id_dec(&tag, &id); |
| |
| if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) |
| return; |
| |
| sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK); |
| WARN_ON_ONCE(!sc); |
| if (!sc) |
| return; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| WARN_ON_ONCE(!io_req); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| return; |
| } |
| |
| if (id & FNIC_TAG_ABORT) { |
| /* Completion of abort cmd */ |
| if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) { |
| /* This is a late completion. Ignore it */ |
| spin_unlock_irqrestore(io_lock, flags); |
| return; |
| } |
| CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; |
| CMD_ABTS_STATUS(sc) = hdr_status; |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "abts cmpl recd. id %d status %s\n", |
| (int)(id & FNIC_TAG_MASK), |
| fnic_fcpio_status_to_str(hdr_status)); |
| |
| /* |
| * If scsi_eh thread is blocked waiting for abts to complete, |
| * signal completion to it. IO will be cleaned in the thread |
| * else clean it in this context |
| */ |
| if (io_req->abts_done) { |
| complete(io_req->abts_done); |
| spin_unlock_irqrestore(io_lock, flags); |
| } else { |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "abts cmpl, completing IO\n"); |
| CMD_SP(sc) = NULL; |
| sc->result = (DID_ERROR << 16); |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| if (sc->scsi_done) |
| sc->scsi_done(sc); |
| } |
| |
| } else if (id & FNIC_TAG_DEV_RST) { |
| /* Completion of device reset */ |
| CMD_LR_STATUS(sc) = hdr_status; |
| CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "dev reset cmpl recd. id %d status %s\n", |
| (int)(id & FNIC_TAG_MASK), |
| fnic_fcpio_status_to_str(hdr_status)); |
| if (io_req->dr_done) |
| complete(io_req->dr_done); |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| } else { |
| shost_printk(KERN_ERR, fnic->lport->host, |
| "Unexpected itmf io state %s tag %x\n", |
| fnic_ioreq_state_to_str(CMD_STATE(sc)), id); |
| spin_unlock_irqrestore(io_lock, flags); |
| } |
| |
| } |
| |
| /* |
| * fnic_fcpio_cmpl_handler |
| * Routine to service the cq for wq_copy |
| */ |
| static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, |
| unsigned int cq_index, |
| struct fcpio_fw_req *desc) |
| { |
| struct fnic *fnic = vnic_dev_priv(vdev); |
| int ret = 0; |
| |
| switch (desc->hdr.type) { |
| case FCPIO_ACK: /* fw copied copy wq desc to its queue */ |
| fnic_fcpio_ack_handler(fnic, cq_index, desc); |
| break; |
| |
| case FCPIO_ICMND_CMPL: /* fw completed a command */ |
| fnic_fcpio_icmnd_cmpl_handler(fnic, desc); |
| break; |
| |
| case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/ |
| fnic_fcpio_itmf_cmpl_handler(fnic, desc); |
| break; |
| |
| case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */ |
| ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc); |
| break; |
| |
| case FCPIO_RESET_CMPL: /* fw completed reset */ |
| ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc); |
| break; |
| |
| default: |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "firmware completion type %d\n", |
| desc->hdr.type); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * fnic_wq_copy_cmpl_handler |
| * Routine to process wq copy |
| */ |
| int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do) |
| { |
| unsigned int wq_work_done = 0; |
| unsigned int i, cq_index; |
| unsigned int cur_work_done; |
| |
| for (i = 0; i < fnic->wq_copy_count; i++) { |
| cq_index = i + fnic->raw_wq_count + fnic->rq_count; |
| cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index], |
| fnic_fcpio_cmpl_handler, |
| copy_work_to_do); |
| wq_work_done += cur_work_done; |
| } |
| return wq_work_done; |
| } |
| |
| static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) |
| { |
| unsigned int i; |
| struct fnic_io_req *io_req; |
| unsigned long flags = 0; |
| struct scsi_cmnd *sc; |
| spinlock_t *io_lock; |
| |
| for (i = 0; i < FNIC_MAX_IO_REQ; i++) { |
| if (i == exclude_id) |
| continue; |
| |
| sc = scsi_host_find_tag(fnic->lport->host, i); |
| if (!sc) |
| continue; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| goto cleanup_scsi_cmd; |
| } |
| |
| CMD_SP(sc) = NULL; |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| /* |
| * If there is a scsi_cmnd associated with this io_req, then |
| * free the corresponding state |
| */ |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| |
| cleanup_scsi_cmd: |
| sc->result = DID_TRANSPORT_DISRUPTED << 16; |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:" |
| " DID_TRANSPORT_DISRUPTED\n"); |
| |
| /* Complete the command to SCSI */ |
| if (sc->scsi_done) |
| sc->scsi_done(sc); |
| } |
| } |
| |
| void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, |
| struct fcpio_host_req *desc) |
| { |
| u32 id; |
| struct fnic *fnic = vnic_dev_priv(wq->vdev); |
| struct fnic_io_req *io_req; |
| struct scsi_cmnd *sc; |
| unsigned long flags; |
| spinlock_t *io_lock; |
| |
| /* get the tag reference */ |
| fcpio_tag_id_dec(&desc->hdr.tag, &id); |
| id &= FNIC_TAG_MASK; |
| |
| if (id >= FNIC_MAX_IO_REQ) |
| return; |
| |
| sc = scsi_host_find_tag(fnic->lport->host, id); |
| if (!sc) |
| return; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| |
| /* Get the IO context which this desc refers to */ |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| |
| /* fnic interrupts are turned off by now */ |
| |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| goto wq_copy_cleanup_scsi_cmd; |
| } |
| |
| CMD_SP(sc) = NULL; |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| |
| wq_copy_cleanup_scsi_cmd: |
| sc->result = DID_NO_CONNECT << 16; |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:" |
| " DID_NO_CONNECT\n"); |
| |
| if (sc->scsi_done) |
| sc->scsi_done(sc); |
| } |
| |
| static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, |
| u32 task_req, u8 *fc_lun, |
| struct fnic_io_req *io_req) |
| { |
| struct vnic_wq_copy *wq = &fnic->wq_copy[0]; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); |
| |
| if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) |
| free_wq_copy_descs(fnic, wq); |
| |
| if (!vnic_wq_copy_desc_avail(wq)) { |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); |
| return 1; |
| } |
| fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT, |
| 0, task_req, tag, fc_lun, io_req->port_id, |
| fnic->config.ra_tov, fnic->config.ed_tov); |
| |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); |
| return 0; |
| } |
| |
| void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) |
| { |
| int tag; |
| struct fnic_io_req *io_req; |
| spinlock_t *io_lock; |
| unsigned long flags; |
| struct scsi_cmnd *sc; |
| struct scsi_lun fc_lun; |
| enum fnic_ioreq_state old_ioreq_state; |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "fnic_rport_reset_exch called portid 0x%06x\n", |
| port_id); |
| |
| if (fnic->in_remove) |
| return; |
| |
| for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { |
| sc = scsi_host_find_tag(fnic->lport->host, tag); |
| if (!sc) |
| continue; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| |
| if (!io_req || io_req->port_id != port_id) { |
| spin_unlock_irqrestore(io_lock, flags); |
| continue; |
| } |
| |
| /* |
| * Found IO that is still pending with firmware and |
| * belongs to rport that went away |
| */ |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { |
| spin_unlock_irqrestore(io_lock, flags); |
| continue; |
| } |
| old_ioreq_state = CMD_STATE(sc); |
| CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; |
| CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; |
| |
| BUG_ON(io_req->abts_done); |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "fnic_rport_reset_exch: Issuing abts\n"); |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| /* Now queue the abort command to firmware */ |
| int_to_scsilun(sc->device->lun, &fc_lun); |
| |
| if (fnic_queue_abort_io_req(fnic, tag, |
| FCPIO_ITMF_ABT_TASK_TERM, |
| fc_lun.scsi_lun, io_req)) { |
| /* |
| * Revert the cmd state back to old state, if |
| * it hasnt changed in between. This cmd will get |
| * aborted later by scsi_eh, or cleaned up during |
| * lun reset |
| */ |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| |
| spin_lock_irqsave(io_lock, flags); |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) |
| CMD_STATE(sc) = old_ioreq_state; |
| spin_unlock_irqrestore(io_lock, flags); |
| } |
| } |
| |
| } |
| |
| void fnic_terminate_rport_io(struct fc_rport *rport) |
| { |
| int tag; |
| struct fnic_io_req *io_req; |
| spinlock_t *io_lock; |
| unsigned long flags; |
| struct scsi_cmnd *sc; |
| struct scsi_lun fc_lun; |
| struct fc_rport_libfc_priv *rdata = rport->dd_data; |
| struct fc_lport *lport = rdata->local_port; |
| struct fnic *fnic = lport_priv(lport); |
| struct fc_rport *cmd_rport; |
| enum fnic_ioreq_state old_ioreq_state; |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, "fnic_terminate_rport_io called" |
| " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n", |
| rport->port_name, rport->node_name, |
| rport->port_id); |
| |
| if (fnic->in_remove) |
| return; |
| |
| for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { |
| sc = scsi_host_find_tag(fnic->lport->host, tag); |
| if (!sc) |
| continue; |
| |
| cmd_rport = starget_to_rport(scsi_target(sc->device)); |
| if (rport != cmd_rport) |
| continue; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| |
| if (!io_req || rport != cmd_rport) { |
| spin_unlock_irqrestore(io_lock, flags); |
| continue; |
| } |
| |
| /* |
| * Found IO that is still pending with firmware and |
| * belongs to rport that went away |
| */ |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { |
| spin_unlock_irqrestore(io_lock, flags); |
| continue; |
| } |
| old_ioreq_state = CMD_STATE(sc); |
| CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; |
| CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; |
| |
| BUG_ON(io_req->abts_done); |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "fnic_terminate_rport_io: Issuing abts\n"); |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| /* Now queue the abort command to firmware */ |
| int_to_scsilun(sc->device->lun, &fc_lun); |
| |
| if (fnic_queue_abort_io_req(fnic, tag, |
| FCPIO_ITMF_ABT_TASK_TERM, |
| fc_lun.scsi_lun, io_req)) { |
| /* |
| * Revert the cmd state back to old state, if |
| * it hasnt changed in between. This cmd will get |
| * aborted later by scsi_eh, or cleaned up during |
| * lun reset |
| */ |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| |
| spin_lock_irqsave(io_lock, flags); |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) |
| CMD_STATE(sc) = old_ioreq_state; |
| spin_unlock_irqrestore(io_lock, flags); |
| } |
| } |
| |
| } |
| |
| static void fnic_block_error_handler(struct scsi_cmnd *sc) |
| { |
| struct Scsi_Host *shost = sc->device->host; |
| struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); |
| unsigned long flags; |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| while (rport->port_state == FC_PORTSTATE_BLOCKED) { |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| msleep(1000); |
| spin_lock_irqsave(shost->host_lock, flags); |
| } |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| } |
| |
| /* |
| * This function is exported to SCSI for sending abort cmnds. |
| * A SCSI IO is represented by a io_req in the driver. |
| * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO. |
| */ |
| int fnic_abort_cmd(struct scsi_cmnd *sc) |
| { |
| struct fc_lport *lp; |
| struct fnic *fnic; |
| struct fnic_io_req *io_req; |
| struct fc_rport *rport; |
| spinlock_t *io_lock; |
| unsigned long flags; |
| int ret = SUCCESS; |
| u32 task_req; |
| struct scsi_lun fc_lun; |
| DECLARE_COMPLETION_ONSTACK(tm_done); |
| |
| /* Wait for rport to unblock */ |
| fnic_block_error_handler(sc); |
| |
| /* Get local-port, check ready and link up */ |
| lp = shost_priv(sc->device->host); |
| |
| fnic = lport_priv(lp); |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n", |
| (starget_to_rport(scsi_target(sc->device)))->port_id, |
| sc->device->lun, sc->request->tag); |
| |
| if (lp->state != LPORT_ST_READY || !(lp->link_up)) { |
| ret = FAILED; |
| goto fnic_abort_cmd_end; |
| } |
| |
| /* |
| * Avoid a race between SCSI issuing the abort and the device |
| * completing the command. |
| * |
| * If the command is already completed by the fw cmpl code, |
| * we just return SUCCESS from here. This means that the abort |
| * succeeded. In the SCSI ML, since the timeout for command has |
| * happened, the completion wont actually complete the command |
| * and it will be considered as an aborted command |
| * |
| * The CMD_SP will not be cleared except while holding io_req_lock. |
| */ |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| goto fnic_abort_cmd_end; |
| } |
| |
| io_req->abts_done = &tm_done; |
| |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { |
| spin_unlock_irqrestore(io_lock, flags); |
| goto wait_pending; |
| } |
| /* |
| * Command is still pending, need to abort it |
| * If the firmware completes the command after this point, |
| * the completion wont be done till mid-layer, since abort |
| * has already started. |
| */ |
| CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; |
| CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| /* |
| * Check readiness of the remote port. If the path to remote |
| * port is up, then send abts to the remote port to terminate |
| * the IO. Else, just locally terminate the IO in the firmware |
| */ |
| rport = starget_to_rport(scsi_target(sc->device)); |
| if (fc_remote_port_chkready(rport) == 0) |
| task_req = FCPIO_ITMF_ABT_TASK; |
| else |
| task_req = FCPIO_ITMF_ABT_TASK_TERM; |
| |
| /* Now queue the abort command to firmware */ |
| int_to_scsilun(sc->device->lun, &fc_lun); |
| |
| if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req, |
| fc_lun.scsi_lun, io_req)) { |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (io_req) |
| io_req->abts_done = NULL; |
| spin_unlock_irqrestore(io_lock, flags); |
| ret = FAILED; |
| goto fnic_abort_cmd_end; |
| } |
| |
| /* |
| * We queued an abort IO, wait for its completion. |
| * Once the firmware completes the abort command, it will |
| * wake up this thread. |
| */ |
| wait_pending: |
| wait_for_completion_timeout(&tm_done, |
| msecs_to_jiffies |
| (2 * fnic->config.ra_tov + |
| fnic->config.ed_tov)); |
| |
| /* Check the abort status */ |
| spin_lock_irqsave(io_lock, flags); |
| |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| ret = FAILED; |
| goto fnic_abort_cmd_end; |
| } |
| io_req->abts_done = NULL; |
| |
| /* fw did not complete abort, timed out */ |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { |
| spin_unlock_irqrestore(io_lock, flags); |
| ret = FAILED; |
| goto fnic_abort_cmd_end; |
| } |
| |
| /* |
| * firmware completed the abort, check the status, |
| * free the io_req irrespective of failure or success |
| */ |
| if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS) |
| ret = FAILED; |
| |
| CMD_SP(sc) = NULL; |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| |
| fnic_abort_cmd_end: |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Returning from abort cmd %s\n", |
| (ret == SUCCESS) ? |
| "SUCCESS" : "FAILED"); |
| return ret; |
| } |
| |
| static inline int fnic_queue_dr_io_req(struct fnic *fnic, |
| struct scsi_cmnd *sc, |
| struct fnic_io_req *io_req) |
| { |
| struct vnic_wq_copy *wq = &fnic->wq_copy[0]; |
| struct scsi_lun fc_lun; |
| int ret = 0; |
| unsigned long intr_flags; |
| |
| spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); |
| |
| if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) |
| free_wq_copy_descs(fnic, wq); |
| |
| if (!vnic_wq_copy_desc_avail(wq)) { |
| ret = -EAGAIN; |
| goto lr_io_req_end; |
| } |
| |
| /* fill in the lun info */ |
| int_to_scsilun(sc->device->lun, &fc_lun); |
| |
| fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST, |
| 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG, |
| fc_lun.scsi_lun, io_req->port_id, |
| fnic->config.ra_tov, fnic->config.ed_tov); |
| |
| lr_io_req_end: |
| spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Clean up any pending aborts on the lun |
| * For each outstanding IO on this lun, whose abort is not completed by fw, |
| * issue a local abort. Wait for abort to complete. Return 0 if all commands |
| * successfully aborted, 1 otherwise |
| */ |
| static int fnic_clean_pending_aborts(struct fnic *fnic, |
| struct scsi_cmnd *lr_sc) |
| { |
| int tag; |
| struct fnic_io_req *io_req; |
| spinlock_t *io_lock; |
| unsigned long flags; |
| int ret = 0; |
| struct scsi_cmnd *sc; |
| struct fc_rport *rport; |
| struct scsi_lun fc_lun; |
| struct scsi_device *lun_dev = lr_sc->device; |
| DECLARE_COMPLETION_ONSTACK(tm_done); |
| |
| for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { |
| sc = scsi_host_find_tag(fnic->lport->host, tag); |
| /* |
| * ignore this lun reset cmd or cmds that do not belong to |
| * this lun |
| */ |
| if (!sc || sc == lr_sc || sc->device != lun_dev) |
| continue; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| |
| if (!io_req || sc->device != lun_dev) { |
| spin_unlock_irqrestore(io_lock, flags); |
| continue; |
| } |
| |
| /* |
| * Found IO that is still pending with firmware and |
| * belongs to the LUN that we are resetting |
| */ |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Found IO in %s on lun\n", |
| fnic_ioreq_state_to_str(CMD_STATE(sc))); |
| |
| BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING); |
| |
| CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; |
| io_req->abts_done = &tm_done; |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| /* Now queue the abort command to firmware */ |
| int_to_scsilun(sc->device->lun, &fc_lun); |
| rport = starget_to_rport(scsi_target(sc->device)); |
| |
| if (fnic_queue_abort_io_req(fnic, tag, |
| FCPIO_ITMF_ABT_TASK_TERM, |
| fc_lun.scsi_lun, io_req)) { |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (io_req) |
| io_req->abts_done = NULL; |
| spin_unlock_irqrestore(io_lock, flags); |
| ret = 1; |
| goto clean_pending_aborts_end; |
| } |
| |
| wait_for_completion_timeout(&tm_done, |
| msecs_to_jiffies |
| (fnic->config.ed_tov)); |
| |
| /* Recheck cmd state to check if it is now aborted */ |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| ret = 1; |
| goto clean_pending_aborts_end; |
| } |
| |
| io_req->abts_done = NULL; |
| |
| /* if abort is still pending with fw, fail */ |
| if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { |
| spin_unlock_irqrestore(io_lock, flags); |
| ret = 1; |
| goto clean_pending_aborts_end; |
| } |
| CMD_SP(sc) = NULL; |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| } |
| |
| clean_pending_aborts_end: |
| return ret; |
| } |
| |
| /* |
| * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN |
| * fail to get aborted. It calls driver's eh_device_reset with a SCSI command |
| * on the LUN. |
| */ |
| int fnic_device_reset(struct scsi_cmnd *sc) |
| { |
| struct fc_lport *lp; |
| struct fnic *fnic; |
| struct fnic_io_req *io_req; |
| struct fc_rport *rport; |
| int status; |
| int ret = FAILED; |
| spinlock_t *io_lock; |
| unsigned long flags; |
| DECLARE_COMPLETION_ONSTACK(tm_done); |
| |
| /* Wait for rport to unblock */ |
| fnic_block_error_handler(sc); |
| |
| /* Get local-port, check ready and link up */ |
| lp = shost_priv(sc->device->host); |
| |
| fnic = lport_priv(lp); |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "Device reset called FCID 0x%x, LUN 0x%x\n", |
| (starget_to_rport(scsi_target(sc->device)))->port_id, |
| sc->device->lun); |
| |
| |
| if (lp->state != LPORT_ST_READY || !(lp->link_up)) |
| goto fnic_device_reset_end; |
| |
| /* Check if remote port up */ |
| rport = starget_to_rport(scsi_target(sc->device)); |
| if (fc_remote_port_chkready(rport)) |
| goto fnic_device_reset_end; |
| |
| io_lock = fnic_io_lock_hash(fnic, sc); |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| |
| /* |
| * If there is a io_req attached to this command, then use it, |
| * else allocate a new one. |
| */ |
| if (!io_req) { |
| io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| goto fnic_device_reset_end; |
| } |
| memset(io_req, 0, sizeof(*io_req)); |
| io_req->port_id = rport->port_id; |
| CMD_SP(sc) = (char *)io_req; |
| } |
| io_req->dr_done = &tm_done; |
| CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; |
| CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE; |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n", |
| sc->request->tag); |
| |
| /* |
| * issue the device reset, if enqueue failed, clean up the ioreq |
| * and break assoc with scsi cmd |
| */ |
| if (fnic_queue_dr_io_req(fnic, sc, io_req)) { |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (io_req) |
| io_req->dr_done = NULL; |
| goto fnic_device_reset_clean; |
| } |
| |
| /* |
| * Wait on the local completion for LUN reset. The io_req may be |
| * freed while we wait since we hold no lock. |
| */ |
| wait_for_completion_timeout(&tm_done, |
| msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT)); |
| |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (!io_req) { |
| spin_unlock_irqrestore(io_lock, flags); |
| goto fnic_device_reset_end; |
| } |
| io_req->dr_done = NULL; |
| |
| status = CMD_LR_STATUS(sc); |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| /* |
| * If lun reset not completed, bail out with failed. io_req |
| * gets cleaned up during higher levels of EH |
| */ |
| if (status == FCPIO_INVALID_CODE) { |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Device reset timed out\n"); |
| goto fnic_device_reset_end; |
| } |
| |
| /* Completed, but not successful, clean up the io_req, return fail */ |
| if (status != FCPIO_SUCCESS) { |
| spin_lock_irqsave(io_lock, flags); |
| FNIC_SCSI_DBG(KERN_DEBUG, |
| fnic->lport->host, |
| "Device reset completed - failed\n"); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| goto fnic_device_reset_clean; |
| } |
| |
| /* |
| * Clean up any aborts on this lun that have still not |
| * completed. If any of these fail, then LUN reset fails. |
| * clean_pending_aborts cleans all cmds on this lun except |
| * the lun reset cmd. If all cmds get cleaned, the lun reset |
| * succeeds |
| */ |
| if (fnic_clean_pending_aborts(fnic, sc)) { |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Device reset failed" |
| " since could not abort all IOs\n"); |
| goto fnic_device_reset_clean; |
| } |
| |
| /* Clean lun reset command */ |
| spin_lock_irqsave(io_lock, flags); |
| io_req = (struct fnic_io_req *)CMD_SP(sc); |
| if (io_req) |
| /* Completed, and successful */ |
| ret = SUCCESS; |
| |
| fnic_device_reset_clean: |
| if (io_req) |
| CMD_SP(sc) = NULL; |
| |
| spin_unlock_irqrestore(io_lock, flags); |
| |
| if (io_req) { |
| fnic_release_ioreq_buf(fnic, io_req, sc); |
| mempool_free(io_req, fnic->io_req_pool); |
| } |
| |
| fnic_device_reset_end: |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Returning from device reset %s\n", |
| (ret == SUCCESS) ? |
| "SUCCESS" : "FAILED"); |
| return ret; |
| } |
| |
| /* Clean up all IOs, clean up libFC local port */ |
| int fnic_reset(struct Scsi_Host *shost) |
| { |
| struct fc_lport *lp; |
| struct fnic *fnic; |
| int ret = SUCCESS; |
| |
| lp = shost_priv(shost); |
| fnic = lport_priv(lp); |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "fnic_reset called\n"); |
| |
| /* |
| * Reset local port, this will clean up libFC exchanges, |
| * reset remote port sessions, and if link is up, begin flogi |
| */ |
| if (lp->tt.lport_reset(lp)) |
| ret = FAILED; |
| |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "Returning from fnic reset %s\n", |
| (ret == SUCCESS) ? |
| "SUCCESS" : "FAILED"); |
| |
| return ret; |
| } |
| |
| /* |
| * SCSI Error handling calls driver's eh_host_reset if all prior |
| * error handling levels return FAILED. If host reset completes |
| * successfully, and if link is up, then Fabric login begins. |
| * |
| * Host Reset is the highest level of error recovery. If this fails, then |
| * host is offlined by SCSI. |
| * |
| */ |
| int fnic_host_reset(struct scsi_cmnd *sc) |
| { |
| int ret; |
| unsigned long wait_host_tmo; |
| struct Scsi_Host *shost = sc->device->host; |
| struct fc_lport *lp = shost_priv(shost); |
| |
| /* |
| * If fnic_reset is successful, wait for fabric login to complete |
| * scsi-ml tries to send a TUR to every device if host reset is |
| * successful, so before returning to scsi, fabric should be up |
| */ |
| ret = fnic_reset(shost); |
| if (ret == SUCCESS) { |
| wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ; |
| ret = FAILED; |
| while (time_before(jiffies, wait_host_tmo)) { |
| if ((lp->state == LPORT_ST_READY) && |
| (lp->link_up)) { |
| ret = SUCCESS; |
| break; |
| } |
| ssleep(1); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * This fxn is called from libFC when host is removed |
| */ |
| void fnic_scsi_abort_io(struct fc_lport *lp) |
| { |
| int err = 0; |
| unsigned long flags; |
| enum fnic_state old_state; |
| struct fnic *fnic = lport_priv(lp); |
| DECLARE_COMPLETION_ONSTACK(remove_wait); |
| |
| /* Issue firmware reset for fnic, wait for reset to complete */ |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| fnic->remove_wait = &remove_wait; |
| old_state = fnic->state; |
| fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; |
| vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| |
| err = fnic_fw_reset_handler(fnic); |
| if (err) { |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) |
| fnic->state = old_state; |
| fnic->remove_wait = NULL; |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| return; |
| } |
| |
| /* Wait for firmware reset to complete */ |
| wait_for_completion_timeout(&remove_wait, |
| msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT)); |
| |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| fnic->remove_wait = NULL; |
| FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, |
| "fnic_scsi_abort_io %s\n", |
| (fnic->state == FNIC_IN_ETH_MODE) ? |
| "SUCCESS" : "FAILED"); |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| |
| } |
| |
| /* |
| * This fxn called from libFC to clean up driver IO state on link down |
| */ |
| void fnic_scsi_cleanup(struct fc_lport *lp) |
| { |
| unsigned long flags; |
| enum fnic_state old_state; |
| struct fnic *fnic = lport_priv(lp); |
| |
| /* issue fw reset */ |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| old_state = fnic->state; |
| fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; |
| vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| |
| if (fnic_fw_reset_handler(fnic)) { |
| spin_lock_irqsave(&fnic->fnic_lock, flags); |
| if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) |
| fnic->state = old_state; |
| spin_unlock_irqrestore(&fnic->fnic_lock, flags); |
| } |
| |
| } |
| |
| void fnic_empty_scsi_cleanup(struct fc_lport *lp) |
| { |
| } |
| |
| void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) |
| { |
| struct fnic *fnic = lport_priv(lp); |
| |
| /* Non-zero sid, nothing to do */ |
| if (sid) |
| goto call_fc_exch_mgr_reset; |
| |
| if (did) { |
| fnic_rport_exch_reset(fnic, did); |
| goto call_fc_exch_mgr_reset; |
| } |
| |
| /* |
| * sid = 0, did = 0 |
| * link down or device being removed |
| */ |
| if (!fnic->in_remove) |
| fnic_scsi_cleanup(lp); |
| else |
| fnic_scsi_abort_io(lp); |
| |
| /* call libFC exch mgr reset to reset its exchanges */ |
| call_fc_exch_mgr_reset: |
| fc_exch_mgr_reset(lp, sid, did); |
| |
| } |