Input: whitespace fixes in drivers/input/touchscreen
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 546ce59..3cdc9ca 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -226,7 +226,7 @@
input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0);
break;
-
+
case 1: /* 6-byte protocol */
input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0);
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index acb9137..bcfa1e3 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -89,9 +89,9 @@
#define H3600_SCANCODE_Q 4 /* 4 -> Q button */
#define H3600_SCANCODE_START 5 /* 5 -> start menu */
#define H3600_SCANCODE_UP 6 /* 6 -> up */
-#define H3600_SCANCODE_RIGHT 7 /* 7 -> right */
-#define H3600_SCANCODE_LEFT 8 /* 8 -> left */
-#define H3600_SCANCODE_DOWN 9 /* 9 -> down */
+#define H3600_SCANCODE_RIGHT 7 /* 7 -> right */
+#define H3600_SCANCODE_LEFT 8 /* 8 -> left */
+#define H3600_SCANCODE_DOWN 9 /* 9 -> down */
static char *h3600_name = "H3600 TouchScreen";
@@ -113,7 +113,7 @@
static irqreturn_t action_button_handler(int irq, void *dev_id, struct pt_regs *regs)
{
- int down = (GPLR & GPIO_BITSY_ACTION_BUTTON) ? 0 : 1;
+ int down = (GPLR & GPIO_BITSY_ACTION_BUTTON) ? 0 : 1;
struct input_dev *dev = (struct input_dev *) dev_id;
input_regs(dev, regs);
@@ -125,7 +125,7 @@
static irqreturn_t npower_button_handler(int irq, void *dev_id, struct pt_regs *regs)
{
- int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1;
+ int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1;
struct input_dev *dev = (struct input_dev *) dev_id;
/*
@@ -145,8 +145,8 @@
static int flite_brightness = 25;
enum flite_pwr {
- FLITE_PWR_OFF = 0,
- FLITE_PWR_ON = 1
+ FLITE_PWR_OFF = 0,
+ FLITE_PWR_ON = 1
};
/*
@@ -157,9 +157,9 @@
struct h3600_dev *ts = dev->private;
/* Must be in this order */
- ts->serio->write(ts->serio, 1);
+ ts->serio->write(ts->serio, 1);
ts->serio->write(ts->serio, pwr);
- ts->serio->write(ts->serio, brightness);
+ ts->serio->write(ts->serio, brightness);
return 0;
}
@@ -169,26 +169,26 @@
{
struct input_dev *dev = (struct input_dev *) data;
- switch (req) {
- case PM_SUSPEND: /* enter D1-D3 */
- suspended = 1;
- h3600_flite_power(dev, FLITE_PWR_OFF);
- break;
- case PM_BLANK:
- if (!suspended)
- h3600_flite_power(dev, FLITE_PWR_OFF);
- break;
- case PM_RESUME: /* enter D0 */
- /* same as unblank */
- case PM_UNBLANK:
- if (suspended) {
- //initSerial();
- suspended = 0;
- }
- h3600_flite_power(dev, FLITE_PWR_ON);
- break;
- }
- return 0;
+ switch (req) {
+ case PM_SUSPEND: /* enter D1-D3 */
+ suspended = 1;
+ h3600_flite_power(dev, FLITE_PWR_OFF);
+ break;
+ case PM_BLANK:
+ if (!suspended)
+ h3600_flite_power(dev, FLITE_PWR_OFF);
+ break;
+ case PM_RESUME: /* enter D0 */
+ /* same as unblank */
+ case PM_UNBLANK:
+ if (suspended) {
+ //initSerial();
+ suspended = 0;
+ }
+ h3600_flite_power(dev, FLITE_PWR_ON);
+ break;
+ }
+ return 0;
}
#endif
@@ -199,25 +199,25 @@
*/
static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
{
- struct input_dev *dev = &ts->dev;
+ struct input_dev *dev = &ts->dev;
static int touched = 0;
int key, down = 0;
input_regs(dev, regs);
- switch (ts->event) {
- /*
- Buttons - returned as a single byte
- 7 6 5 4 3 2 1 0
- S x x x N N N N
+ switch (ts->event) {
+ /*
+ Buttons - returned as a single byte
+ 7 6 5 4 3 2 1 0
+ S x x x N N N N
- S switch state ( 0=pressed 1=released)
- x Unused.
- NNNN switch number 0-15
+ S switch state ( 0=pressed 1=released)
+ x Unused.
+ NNNN switch number 0-15
- Note: This is true for non interrupt generated key events.
- */
- case KEYBD_ID:
+ Note: This is true for non interrupt generated key events.
+ */
+ case KEYBD_ID:
down = (ts->buf[0] & 0x80) ? 0 : 1;
switch (ts->buf[0] & 0x7f) {
@@ -229,40 +229,40 @@
break;
case H3600_SCANCODE_CONTACTS:
key = KEY_PROG2;
- break;
+ break;
case H3600_SCANCODE_Q:
key = KEY_Q;
- break;
+ break;
case H3600_SCANCODE_START:
key = KEY_PROG3;
- break;
+ break;
case H3600_SCANCODE_UP:
key = KEY_UP;
- break;
+ break;
case H3600_SCANCODE_RIGHT:
key = KEY_RIGHT;
- break;
+ break;
case H3600_SCANCODE_LEFT:
key = KEY_LEFT;
- break;
+ break;
case H3600_SCANCODE_DOWN:
key = KEY_DOWN;
- break;
+ break;
default:
key = 0;
}
- if (key)
- input_report_key(dev, key, down);
- break;
- /*
- * Native touchscreen event data is formatted as shown below:-
- *
- * +-------+-------+-------+-------+
- * | Xmsb | Xlsb | Ymsb | Ylsb |
- * +-------+-------+-------+-------+
- * byte 0 1 2 3
- */
- case TOUCHS_ID:
+ if (key)
+ input_report_key(dev, key, down);
+ break;
+ /*
+ * Native touchscreen event data is formatted as shown below:-
+ *
+ * +-------+-------+-------+-------+
+ * | Xmsb | Xlsb | Ymsb | Ylsb |
+ * +-------+-------+-------+-------+
+ * byte 0 1 2 3
+ */
+ case TOUCHS_ID:
if (!touched) {
input_report_key(dev, BTN_TOUCH, 1);
touched = 1;
@@ -272,19 +272,19 @@
unsigned short x, y;
x = ts->buf[0]; x <<= 8; x += ts->buf[1];
- y = ts->buf[2]; y <<= 8; y += ts->buf[3];
+ y = ts->buf[2]; y <<= 8; y += ts->buf[3];
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
} else {
- input_report_key(dev, BTN_TOUCH, 0);
+ input_report_key(dev, BTN_TOUCH, 0);
touched = 0;
}
- break;
+ break;
default:
/* Send a non input event elsewhere */
break;
- }
+ }
input_sync(dev);
}
@@ -293,7 +293,7 @@
* h3600ts_event() handles events from the input module.
*/
static int h3600ts_event(struct input_dev *dev, unsigned int type,
- unsigned int code, int value)
+ unsigned int code, int value)
{
struct h3600_dev *ts = dev->private;
@@ -332,41 +332,41 @@
static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data,
unsigned int flags, struct pt_regs *regs)
{
- struct h3600_dev *ts = serio_get_drvdata(serio);
+ struct h3600_dev *ts = serio_get_drvdata(serio);
/*
- * We have a new frame coming in.
- */
+ * We have a new frame coming in.
+ */
switch (state) {
case STATE_SOF:
- if (data == CHAR_SOF)
- state = STATE_ID;
+ if (data == CHAR_SOF)
+ state = STATE_ID;
break;
- case STATE_ID:
+ case STATE_ID:
ts->event = (data & 0xf0) >> 4;
ts->len = (data & 0xf);
ts->idx = 0;
if (ts->event >= MAX_ID) {
state = STATE_SOF;
- break;
+ break;
}
ts->chksum = data;
- state = (ts->len > 0) ? STATE_DATA : STATE_EOF;
+ state = (ts->len > 0) ? STATE_DATA : STATE_EOF;
break;
case STATE_DATA:
ts->chksum += data;
ts->buf[ts->idx]= data;
- if(++ts->idx == ts->len)
- state = STATE_EOF;
+ if (++ts->idx == ts->len)
+ state = STATE_EOF;
break;
case STATE_EOF:
- state = STATE_SOF;
- if (data == CHAR_EOF || data == ts->chksum)
+ state = STATE_SOF;
+ if (data == CHAR_EOF || data == ts->chksum)
h3600ts_process_packet(ts, regs);
- break;
- default:
- printk("Error3\n");
- break;
+ break;
+ default:
+ printk("Error3\n");
+ break;
}
return IRQ_HANDLED;
@@ -390,10 +390,10 @@
init_input_dev(&ts->dev);
/* Device specific stuff */
- set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES);
- set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
+ set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES);
+ set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
- if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
+ if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_action", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
@@ -401,7 +401,7 @@
return -EBUSY;
}
- if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
+ if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_suspend", &ts->dev)) {
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
@@ -433,7 +433,7 @@
sprintf(ts->phys, "%s/input0", serio->phys);
- ts->dev.event = h3600ts_event;
+ ts->dev.event = h3600ts_event;
ts->dev.private = ts;
ts->dev.name = h3600_name;
ts->dev.phys = ts->phys;
@@ -446,8 +446,8 @@
err = serio_open(serio, drv);
if (err) {
- free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts);
- free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts);
+ free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts);
+ free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts);
serio_set_drvdata(serio, NULL);
kfree(ts);
return err;
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index 2d14a57..855c2c2 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -17,7 +17,7 @@
* found in Gateway AOL Connected Touchpad computers.
*
* Documentation for ICS MK712 can be found at:
- * http://www.icst.com/pdf/mk712.pdf
+ * http://www.icst.com/pdf/mk712.pdf
*/
/*