| /* |
| * Cirrus Logic CLPS711X CLK driver |
| * |
| * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/clkdev.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/of_address.h> |
| #include <linux/slab.h> |
| #include <linux/mfd/syscon/clps711x.h> |
| |
| #include <dt-bindings/clock/clps711x-clock.h> |
| |
| #define CLPS711X_SYSCON1 (0x0100) |
| #define CLPS711X_SYSCON2 (0x1100) |
| #define CLPS711X_SYSFLG2 (CLPS711X_SYSCON2 + SYSFLG_OFFSET) |
| #define CLPS711X_PLLR (0xa5a8) |
| |
| #define CLPS711X_EXT_FREQ (13000000) |
| #define CLPS711X_OSC_FREQ (3686400) |
| |
| static const struct clk_div_table spi_div_table[] = { |
| { .val = 0, .div = 32, }, |
| { .val = 1, .div = 8, }, |
| { .val = 2, .div = 2, }, |
| { .val = 3, .div = 1, }, |
| }; |
| |
| static const struct clk_div_table timer_div_table[] = { |
| { .val = 0, .div = 256, }, |
| { .val = 1, .div = 1, }, |
| }; |
| |
| struct clps711x_clk { |
| struct clk_onecell_data clk_data; |
| spinlock_t lock; |
| struct clk *clks[CLPS711X_CLK_MAX]; |
| }; |
| |
| static struct clps711x_clk * __init _clps711x_clk_init(void __iomem *base, |
| u32 fref) |
| { |
| u32 tmp, f_cpu, f_pll, f_bus, f_tim, f_pwm, f_spi; |
| struct clps711x_clk *clps711x_clk; |
| unsigned i; |
| |
| if (!base) |
| return ERR_PTR(-ENOMEM); |
| |
| clps711x_clk = kzalloc(sizeof(*clps711x_clk), GFP_KERNEL); |
| if (!clps711x_clk) |
| return ERR_PTR(-ENOMEM); |
| |
| spin_lock_init(&clps711x_clk->lock); |
| |
| /* Read PLL multiplier value and sanity check */ |
| tmp = readl(base + CLPS711X_PLLR) >> 24; |
| if (((tmp >= 10) && (tmp <= 50)) || !fref) |
| f_pll = DIV_ROUND_UP(CLPS711X_OSC_FREQ * tmp, 2); |
| else |
| f_pll = fref; |
| |
| tmp = readl(base + CLPS711X_SYSFLG2); |
| if (tmp & SYSFLG2_CKMODE) { |
| f_cpu = CLPS711X_EXT_FREQ; |
| f_bus = CLPS711X_EXT_FREQ; |
| f_spi = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 96); |
| f_pll = 0; |
| f_pwm = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 128); |
| } else { |
| f_cpu = f_pll; |
| if (f_cpu > 36864000) |
| f_bus = DIV_ROUND_UP(f_cpu, 2); |
| else |
| f_bus = 36864000 / 2; |
| f_spi = DIV_ROUND_CLOSEST(f_cpu, 576); |
| f_pwm = DIV_ROUND_CLOSEST(f_cpu, 768); |
| } |
| |
| if (tmp & SYSFLG2_CKMODE) { |
| if (readl(base + CLPS711X_SYSCON2) & SYSCON2_OSTB) |
| f_tim = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 26); |
| else |
| f_tim = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 24); |
| } else |
| f_tim = DIV_ROUND_CLOSEST(f_cpu, 144); |
| |
| tmp = readl(base + CLPS711X_SYSCON1); |
| /* Timer1 in free running mode. |
| * Counter will wrap around to 0xffff when it underflows |
| * and will continue to count down. |
| */ |
| tmp &= ~(SYSCON1_TC1M | SYSCON1_TC1S); |
| /* Timer2 in prescale mode. |
| * Value writen is automatically re-loaded when |
| * the counter underflows. |
| */ |
| tmp |= SYSCON1_TC2M | SYSCON1_TC2S; |
| writel(tmp, base + CLPS711X_SYSCON1); |
| |
| clps711x_clk->clks[CLPS711X_CLK_DUMMY] = |
| clk_register_fixed_rate(NULL, "dummy", NULL, 0, 0); |
| clps711x_clk->clks[CLPS711X_CLK_CPU] = |
| clk_register_fixed_rate(NULL, "cpu", NULL, 0, f_cpu); |
| clps711x_clk->clks[CLPS711X_CLK_BUS] = |
| clk_register_fixed_rate(NULL, "bus", NULL, 0, f_bus); |
| clps711x_clk->clks[CLPS711X_CLK_PLL] = |
| clk_register_fixed_rate(NULL, "pll", NULL, 0, f_pll); |
| clps711x_clk->clks[CLPS711X_CLK_TIMERREF] = |
| clk_register_fixed_rate(NULL, "timer_ref", NULL, 0, f_tim); |
| clps711x_clk->clks[CLPS711X_CLK_TIMER1] = |
| clk_register_divider_table(NULL, "timer1", "timer_ref", 0, |
| base + CLPS711X_SYSCON1, 5, 1, 0, |
| timer_div_table, &clps711x_clk->lock); |
| clps711x_clk->clks[CLPS711X_CLK_TIMER2] = |
| clk_register_divider_table(NULL, "timer2", "timer_ref", 0, |
| base + CLPS711X_SYSCON1, 7, 1, 0, |
| timer_div_table, &clps711x_clk->lock); |
| clps711x_clk->clks[CLPS711X_CLK_PWM] = |
| clk_register_fixed_rate(NULL, "pwm", NULL, 0, f_pwm); |
| clps711x_clk->clks[CLPS711X_CLK_SPIREF] = |
| clk_register_fixed_rate(NULL, "spi_ref", NULL, 0, f_spi); |
| clps711x_clk->clks[CLPS711X_CLK_SPI] = |
| clk_register_divider_table(NULL, "spi", "spi_ref", 0, |
| base + CLPS711X_SYSCON1, 16, 2, 0, |
| spi_div_table, &clps711x_clk->lock); |
| clps711x_clk->clks[CLPS711X_CLK_UART] = |
| clk_register_fixed_factor(NULL, "uart", "bus", 0, 1, 10); |
| clps711x_clk->clks[CLPS711X_CLK_TICK] = |
| clk_register_fixed_rate(NULL, "tick", NULL, 0, 64); |
| for (i = 0; i < CLPS711X_CLK_MAX; i++) |
| if (IS_ERR(clps711x_clk->clks[i])) |
| pr_err("clk %i: register failed with %ld\n", |
| i, PTR_ERR(clps711x_clk->clks[i])); |
| |
| return clps711x_clk; |
| } |
| |
| void __init clps711x_clk_init(void __iomem *base) |
| { |
| struct clps711x_clk *clps711x_clk; |
| |
| clps711x_clk = _clps711x_clk_init(base, 73728000); |
| |
| BUG_ON(IS_ERR(clps711x_clk)); |
| |
| /* Clocksource */ |
| clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_TIMER1], |
| NULL, "clps711x-timer.0"); |
| clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_TIMER2], |
| NULL, "clps711x-timer.1"); |
| |
| /* Drivers */ |
| clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_PWM], |
| NULL, "clps711x-pwm"); |
| clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_UART], |
| NULL, "clps711x-uart.0"); |
| clk_register_clkdev(clps711x_clk->clks[CLPS711X_CLK_UART], |
| NULL, "clps711x-uart.1"); |
| } |
| |
| #ifdef CONFIG_OF |
| static void __init clps711x_clk_init_dt(struct device_node *np) |
| { |
| void __iomem *base = of_iomap(np, 0); |
| struct clps711x_clk *clps711x_clk; |
| u32 fref = 0; |
| |
| WARN_ON(of_property_read_u32(np, "startup-frequency", &fref)); |
| |
| clps711x_clk = _clps711x_clk_init(base, fref); |
| BUG_ON(IS_ERR(clps711x_clk)); |
| |
| clps711x_clk->clk_data.clks = clps711x_clk->clks; |
| clps711x_clk->clk_data.clk_num = CLPS711X_CLK_MAX; |
| of_clk_add_provider(np, of_clk_src_onecell_get, |
| &clps711x_clk->clk_data); |
| } |
| CLK_OF_DECLARE(clps711x, "cirrus,ep7209-clk", clps711x_clk_init_dt); |
| #endif |