[media] em28xx: Fix CodingStyle issues introduced by changeset 82e7dbb
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 705aedf..d92e0af 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -337,9 +337,8 @@
};
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
-// xc5000 reset
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
- {EM2874_R80_GPIO, 0x4f, 0xff, 10},
+ {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
{EM2874_R80_GPIO, 0x4f, 0xff, 10},
{ -1, -1, -1, -1},
@@ -905,6 +904,8 @@
.tuner_addr = 0x41,
.dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
.tuner_gpio = terratec_h5_gpio,
+#else
+ .tuner_type = TUNER_ABSENT,
#endif
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE |
@@ -913,12 +914,14 @@
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
.name = "Hauppauge WinTV HVR 930C",
.has_dvb = 1,
-//#if 0
-// .tuner_type = TUNER_XC5000,
-// .tuner_addr = 0x41,
-// .dvb_gpio = hauppauge_930c_digital, /* FIXME: probably wrong */
+#if 0 /* FIXME: Add analog support */
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x41,
+ .dvb_gpio = hauppauge_930c_digital,
.tuner_gpio = hauppauge_930c_gpio,
-//#endif
+#else
+ .tuner_type = TUNER_ABSENT,
+#endif
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,