isci: Remove "screaming" data types
Converting the all CAPS data types to lower case.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/scsi/isci/core/scu_task_context.h b/drivers/scsi/isci/core/scu_task_context.h
index 818a575..7df87d9 100644
--- a/drivers/scsi/isci/core/scu_task_context.h
+++ b/drivers/scsi/isci/core/scu_task_context.h
@@ -65,7 +65,7 @@
/**
- * enum SCU_SSP_TASK_TYPE - This enumberation defines the various SSP task
+ * enum scu_ssp_task_type - This enumberation defines the various SSP task
* types the SCU hardware will accept. The definition for the various task
* types the SCU hardware will accept can be found in the DS specification.
*
@@ -78,10 +78,10 @@
SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */
SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */
SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */
-} SCU_SSP_TASK_TYPE;
+} scu_ssp_task_type;
/**
- * enum SCU_SATA_TASK_TYPE - This enumeration defines the various SATA task
+ * enum scu_sata_task_type - This enumeration defines the various SATA task
* types the SCU hardware will accept. The definition for the various task
* types the SCU hardware will accept can be found in the DS specification.
*
@@ -99,7 +99,7 @@
SCU_TASK_TYPE_DMA_OUT, /* /< Write request */
SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */
SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */
-} SCU_SATA_TASK_TYPE;
+} scu_sata_task_type;
/**
@@ -290,12 +290,12 @@
#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07
/**
- * struct SSP_TASK_CONTEXT - This is the SCU hardware definition for an SSP
+ * struct ssp_task_context - This is the SCU hardware definition for an SSP
* request.
*
*
*/
-struct SSP_TASK_CONTEXT {
+struct ssp_task_context {
/* OFFSET 0x18 */
u32 reserved00:24;
u32 frame_type:8;
@@ -324,12 +324,12 @@
};
/**
- * struct STP_TASK_CONTEXT - This is the SCU hardware definition for an STP
+ * struct stp_task_context - This is the SCU hardware definition for an STP
* request.
*
*
*/
-struct STP_TASK_CONTEXT {
+struct stp_task_context {
/* OFFSET 0x18 */
u32 fis_type:8;
u32 pm_port:4;
@@ -356,12 +356,12 @@
};
/**
- * struct SMP_TASK_CONTEXT - This is the SCU hardware definition for an SMP
+ * struct smp_task_context - This is the SCU hardware definition for an SMP
* request.
*
*
*/
-struct SMP_TASK_CONTEXT {
+struct smp_task_context {
/* OFFSET 0x18 */
u32 response_length:8;
u32 function_result:8;
@@ -386,12 +386,12 @@
};
/**
- * struct PRIMITIVE_TASK_CONTEXT - This is the SCU hardware definition used
+ * struct primitive_task_context - This is the SCU hardware definition used
* when the driver wants to send a primitive on the link.
*
*
*/
-struct PRIMITIVE_TASK_CONTEXT {
+struct primitive_task_context {
/* OFFSET 0x18 */
/**
* This field is the control word and it must be 0.
@@ -421,13 +421,13 @@
* The union of the protocols that can be selected in the SCU task context
* field.
*
- * PROTOCOL_CONTEXT
+ * protocol_context
*/
-union PROTOCOL_CONTEXT {
- struct SSP_TASK_CONTEXT ssp;
- struct STP_TASK_CONTEXT stp;
- struct SMP_TASK_CONTEXT smp;
- struct PRIMITIVE_TASK_CONTEXT primitive;
+union protocol_context {
+ struct ssp_task_context ssp;
+ struct stp_task_context stp;
+ struct smp_task_context smp;
+ struct primitive_task_context primitive;
u32 words[6];
};
@@ -502,13 +502,13 @@
};
/**
- * struct TRANSPORT_SNAPSHOT - This structure is the SCU hardware scratch area
+ * struct transport_snapshot - This structure is the SCU hardware scratch area
* for the task context. This is set to 0 by the driver but can be read by
* issuing a dump TC request to the SCU.
*
*
*/
-struct TRANSPORT_SNAPSHOT {
+struct transport_snapshot {
/* OFFSET 0x48 */
u32 xfer_rdy_write_data_length;
@@ -639,7 +639,7 @@
/**
* This field is programmed with one of the following command type codes
*
- * For SAS requests use the SCU_SSP_TASK_TYPE
+ * For SAS requests use the scu_ssp_task_type
* - SCU_TASK_TYPE_IOREAD
* - SCU_TASK_TYPE_IOWRITE
* - SCU_TASK_TYPE_SMP_REQUEST
@@ -647,7 +647,7 @@
* - SCU_TASK_TYPE_RAW_FRAME
* - SCU_TASK_TYPE_PRIMITIVE
*
- * For SATA requests use the SCU_SATA_TASK_TYPE
+ * For SATA requests use the scu_sata_task_type
* - SCU_TASK_TYPE_DMA_IN
* - SCU_TASK_TYPE_FPDMAQ_READ
* - SCU_TASK_TYPE_PACKET_DMA_IN
@@ -787,7 +787,7 @@
/**
* This union provides for the protocol specif part of the SCU Task Context.
*/
- union PROTOCOL_CONTEXT type;
+ union protocol_context type;
/* OFFSET 0x30-0x34 */
/**
@@ -863,7 +863,7 @@
u32 write_data_length; /* read only set to 0 */
/* OFFSET 0x48-0x58 */
- struct TRANSPORT_SNAPSHOT snapshot; /* read only set to 0 */
+ struct transport_snapshot snapshot; /* read only set to 0 */
/* OFFSET 0x5C */
u32 block_protection_enable:1;