[SCSI] qla4xxx: Rename 82XX macros
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index e7a9cc4..1936c81 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -490,8 +490,8 @@
* Base addresses of major components on-chip.
* ====================== BASE ADDRESSES ON-CHIP ======================
*/
-#define QLA82XX_ADDR_DDR_NET (0x0000000000000000ULL)
-#define QLA82XX_ADDR_DDR_NET_MAX (0x000000000fffffffULL)
+#define QLA8XXX_ADDR_DDR_NET (0x0000000000000000ULL)
+#define QLA8XXX_ADDR_DDR_NET_MAX (0x000000000fffffffULL)
/* Imbus address bit used to indicate a host address. This bit is
* eliminated by the pcie bar and bar select before presentation
@@ -500,11 +500,11 @@
#define QLA82XX_P2_ADDR_PCIE (0x0000000800000000ULL)
#define QLA82XX_P3_ADDR_PCIE (0x0000008000000000ULL)
#define QLA82XX_ADDR_PCIE_MAX (0x0000000FFFFFFFFFULL)
-#define QLA82XX_ADDR_OCM0 (0x0000000200000000ULL)
-#define QLA82XX_ADDR_OCM0_MAX (0x00000002000fffffULL)
-#define QLA82XX_ADDR_OCM1 (0x0000000200400000ULL)
-#define QLA82XX_ADDR_OCM1_MAX (0x00000002004fffffULL)
-#define QLA82XX_ADDR_QDR_NET (0x0000000300000000ULL)
+#define QLA8XXX_ADDR_OCM0 (0x0000000200000000ULL)
+#define QLA8XXX_ADDR_OCM0_MAX (0x00000002000fffffULL)
+#define QLA8XXX_ADDR_OCM1 (0x0000000200400000ULL)
+#define QLA8XXX_ADDR_OCM1_MAX (0x00000002004fffffULL)
+#define QLA8XXX_ADDR_QDR_NET (0x0000000300000000ULL)
#define QLA82XX_P2_ADDR_QDR_NET_MAX (0x00000003001fffffULL)
#define QLA82XX_P3_ADDR_QDR_NET_MAX (0x0000000303ffffffULL)
@@ -572,13 +572,13 @@
#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c))
/* Every driver should use these Device State */
-#define QLA82XX_DEV_COLD 1
-#define QLA82XX_DEV_INITIALIZING 2
-#define QLA82XX_DEV_READY 3
-#define QLA82XX_DEV_NEED_RESET 4
-#define QLA82XX_DEV_NEED_QUIESCENT 5
-#define QLA82XX_DEV_FAILED 6
-#define QLA82XX_DEV_QUIESCENT 7
+#define QLA8XXX_DEV_COLD 1
+#define QLA8XXX_DEV_INITIALIZING 2
+#define QLA8XXX_DEV_READY 3
+#define QLA8XXX_DEV_NEED_RESET 4
+#define QLA8XXX_DEV_NEED_QUIESCENT 5
+#define QLA8XXX_DEV_FAILED 6
+#define QLA8XXX_DEV_QUIESCENT 7
#define MAX_STATES 8 /* Increment if new state added */
#define QLA82XX_IDC_VERSION 0x1
@@ -795,41 +795,41 @@
/* Minidump related */
/* Entry Type Defines */
-#define QLA82XX_RDNOP 0
-#define QLA82XX_RDCRB 1
-#define QLA82XX_RDMUX 2
-#define QLA82XX_QUEUE 3
-#define QLA82XX_BOARD 4
-#define QLA82XX_RDOCM 6
-#define QLA82XX_PREGS 7
-#define QLA82XX_L1DTG 8
-#define QLA82XX_L1ITG 9
-#define QLA82XX_L1DAT 11
-#define QLA82XX_L1INS 12
-#define QLA82XX_L2DTG 21
-#define QLA82XX_L2ITG 22
-#define QLA82XX_L2DAT 23
-#define QLA82XX_L2INS 24
-#define QLA82XX_RDROM 71
-#define QLA82XX_RDMEM 72
-#define QLA82XX_CNTRL 98
-#define QLA82XX_RDEND 255
+#define QLA8XXX_RDNOP 0
+#define QLA8XXX_RDCRB 1
+#define QLA8XXX_RDMUX 2
+#define QLA8XXX_QUEUE 3
+#define QLA8XXX_BOARD 4
+#define QLA8XXX_RDOCM 6
+#define QLA8XXX_PREGS 7
+#define QLA8XXX_L1DTG 8
+#define QLA8XXX_L1ITG 9
+#define QLA8XXX_L1DAT 11
+#define QLA8XXX_L1INS 12
+#define QLA8XXX_L2DTG 21
+#define QLA8XXX_L2ITG 22
+#define QLA8XXX_L2DAT 23
+#define QLA8XXX_L2INS 24
+#define QLA8XXX_RDROM 71
+#define QLA8XXX_RDMEM 72
+#define QLA8XXX_CNTRL 98
+#define QLA8XXX_RDEND 255
/* Opcodes for Control Entries.
* These Flags are bit fields.
*/
-#define QLA82XX_DBG_OPCODE_WR 0x01
-#define QLA82XX_DBG_OPCODE_RW 0x02
-#define QLA82XX_DBG_OPCODE_AND 0x04
-#define QLA82XX_DBG_OPCODE_OR 0x08
-#define QLA82XX_DBG_OPCODE_POLL 0x10
-#define QLA82XX_DBG_OPCODE_RDSTATE 0x20
-#define QLA82XX_DBG_OPCODE_WRSTATE 0x40
-#define QLA82XX_DBG_OPCODE_MDSTATE 0x80
+#define QLA8XXX_DBG_OPCODE_WR 0x01
+#define QLA8XXX_DBG_OPCODE_RW 0x02
+#define QLA8XXX_DBG_OPCODE_AND 0x04
+#define QLA8XXX_DBG_OPCODE_OR 0x08
+#define QLA8XXX_DBG_OPCODE_POLL 0x10
+#define QLA8XXX_DBG_OPCODE_RDSTATE 0x20
+#define QLA8XXX_DBG_OPCODE_WRSTATE 0x40
+#define QLA8XXX_DBG_OPCODE_MDSTATE 0x80
/* Driver Flags */
-#define QLA82XX_DBG_SKIPPED_FLAG 0x80 /* driver skipped this entry */
-#define QLA82XX_DBG_SIZE_ERR_FLAG 0x40 /* Entry vs Capture size
+#define QLA8XXX_DBG_SKIPPED_FLAG 0x80 /* driver skipped this entry */
+#define QLA8XXX_DBG_SIZE_ERR_FLAG 0x40 /* Entry vs Capture size
* mismatch */
/* Driver_code is for driver to write some info about the entry