ARM: nomadik: get rid of <mach/hardware.h>
This was only used from the core machine, source it into the machine
file and delete, also convert all direct references using the
physical-to-virtual macros in this file to ioremap() and only
default-remap the 4K used by the debug UART.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 60a18e1..21c1aa5 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -38,7 +38,6 @@
#include <linux/gpio.h>
#include <linux/amba/mmci.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -48,6 +47,51 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+/*
+ * These are the only hard-coded address offsets we still have to use.
+ */
+#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
+#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
+#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
+#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
+#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
+#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
+#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
+#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
+#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
+#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
+#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
+#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
+#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
+#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
+#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
+#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
+#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
+#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
+#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
+#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
+#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
+#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
+#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
+#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
+#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
+#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
+#define NOMADIK_UART1_VBASE 0xF01FB000
+
static unsigned long out_low[] = { PIN_OUTPUT_LOW };
static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
@@ -90,30 +134,29 @@
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
};
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc cpu8815_io_desc[] __initdata = {
{
- .virtual = NOMADIK_IO_VIRTUAL,
- .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL),
- .length = NOMADIK_IO_SIZE,
- .type = MT_DEVICE,
- }
- /* static ram and secured ram may be added later */
+ .virtual = NOMADIK_UART1_VBASE,
+ .pfn = __phys_to_pfn(NOMADIK_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
};
static void __init cpu8815_map_io(void)
{
- iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+ iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc));
}
static void cpu8815_restart(char mode, const char *cmd)
{
- void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+ void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K);
/* FIXME: use egpio when implemented */
/* Write anything to Reset status register */
- writel(1, src_rstsr);
+ writel(1, srcbase + 0x18);
}
/* Initial value for SRC control register: all timers use MXTAL/8 source */