diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 4a8cbf0e..7a95ab8 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -365,7 +366,7 @@
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	if (is_host_enabled(musb))
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 4529409..428e6aa 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/prefetch.h>
@@ -416,7 +417,7 @@
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv) {
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		gpio_free(musb->config->gpio_vrsel);
 		return -ENODEV;
 	}
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index d731c80..0f9fcec 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -426,7 +427,7 @@
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		goto fail;
 
 	if (is_host_enabled(musb))
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 582268d..f649204 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -28,6 +28,7 @@
 #include <linux/list.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
@@ -385,7 +386,7 @@
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		goto unregister;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 92603e4..217808d 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -31,6 +31,7 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/pm_runtime.h>
@@ -377,7 +378,7 @@
 	/* NOP driver needs change if supporting dual instance */
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	/* Returns zero if e.g. not clocked */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2813490..5fdb9da 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -320,7 +320,7 @@
 	 * which needs a driver, drivers aren't always needed.
 	 */
 	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (!musb->xceiv) {
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 8ddf3d5..1a1bd9c 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/prefetch.h>
 #include <linux/usb.h>
@@ -1079,7 +1080,7 @@
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv)
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	pdev = to_platform_device(musb->controller);
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 46cf80a..a8c0fad 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
@@ -38,7 +39,7 @@
 static int ux500_musb_init(struct musb *musb)
 {
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (!musb->xceiv) {
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}