| /* |
| * (Tentative) USB Audio Driver for ALSA |
| * |
| * Mixer control part |
| * |
| * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de> |
| * |
| * Many codes borrowed from audio.c by |
| * Alan Cox (alan@lxorguk.ukuu.org.uk) |
| * Thomas Sailer (sailer@ife.ee.ethz.ch) |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <sound/driver.h> |
| #include <linux/bitops.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/usb.h> |
| #include <sound/core.h> |
| #include <sound/control.h> |
| |
| #include "usbaudio.h" |
| |
| |
| /* |
| */ |
| |
| /* ignore error from controls - for debugging */ |
| /* #define IGNORE_CTL_ERROR */ |
| |
| typedef struct usb_mixer_build mixer_build_t; |
| typedef struct usb_audio_term usb_audio_term_t; |
| typedef struct usb_mixer_elem_info usb_mixer_elem_info_t; |
| |
| |
| struct usb_audio_term { |
| int id; |
| int type; |
| int channels; |
| unsigned int chconfig; |
| int name; |
| }; |
| |
| struct usbmix_name_map; |
| |
| struct usb_mixer_build { |
| snd_usb_audio_t *chip; |
| unsigned char *buffer; |
| unsigned int buflen; |
| unsigned int ctrlif; |
| unsigned short vendor; |
| unsigned short product; |
| DECLARE_BITMAP(unitbitmap, 32*32); |
| usb_audio_term_t oterm; |
| const struct usbmix_name_map *map; |
| }; |
| |
| struct usb_mixer_elem_info { |
| snd_usb_audio_t *chip; |
| unsigned int ctrlif; |
| unsigned int id; |
| unsigned int control; /* CS or ICN (high byte) */ |
| unsigned int cmask; /* channel mask bitmap: 0 = master */ |
| int channels; |
| int val_type; |
| int min, max, res; |
| unsigned int initialized: 1; |
| }; |
| |
| |
| enum { |
| USB_FEATURE_NONE = 0, |
| USB_FEATURE_MUTE = 1, |
| USB_FEATURE_VOLUME, |
| USB_FEATURE_BASS, |
| USB_FEATURE_MID, |
| USB_FEATURE_TREBLE, |
| USB_FEATURE_GEQ, |
| USB_FEATURE_AGC, |
| USB_FEATURE_DELAY, |
| USB_FEATURE_BASSBOOST, |
| USB_FEATURE_LOUDNESS |
| }; |
| |
| enum { |
| USB_MIXER_BOOLEAN, |
| USB_MIXER_INV_BOOLEAN, |
| USB_MIXER_S8, |
| USB_MIXER_U8, |
| USB_MIXER_S16, |
| USB_MIXER_U16, |
| }; |
| |
| enum { |
| USB_PROC_UPDOWN = 1, |
| USB_PROC_UPDOWN_SWITCH = 1, |
| USB_PROC_UPDOWN_MODE_SEL = 2, |
| |
| USB_PROC_PROLOGIC = 2, |
| USB_PROC_PROLOGIC_SWITCH = 1, |
| USB_PROC_PROLOGIC_MODE_SEL = 2, |
| |
| USB_PROC_3DENH = 3, |
| USB_PROC_3DENH_SWITCH = 1, |
| USB_PROC_3DENH_SPACE = 2, |
| |
| USB_PROC_REVERB = 4, |
| USB_PROC_REVERB_SWITCH = 1, |
| USB_PROC_REVERB_LEVEL = 2, |
| USB_PROC_REVERB_TIME = 3, |
| USB_PROC_REVERB_DELAY = 4, |
| |
| USB_PROC_CHORUS = 5, |
| USB_PROC_CHORUS_SWITCH = 1, |
| USB_PROC_CHORUS_LEVEL = 2, |
| USB_PROC_CHORUS_RATE = 3, |
| USB_PROC_CHORUS_DEPTH = 4, |
| |
| USB_PROC_DCR = 6, |
| USB_PROC_DCR_SWITCH = 1, |
| USB_PROC_DCR_RATIO = 2, |
| USB_PROC_DCR_MAX_AMP = 3, |
| USB_PROC_DCR_THRESHOLD = 4, |
| USB_PROC_DCR_ATTACK = 5, |
| USB_PROC_DCR_RELEASE = 6, |
| }; |
| |
| #define MAX_CHANNELS 10 /* max logical channels */ |
| |
| |
| /* |
| * manual mapping of mixer names |
| * if the mixer topology is too complicated and the parsed names are |
| * ambiguous, add the entries in usbmixer_maps.c. |
| */ |
| #include "usbmixer_maps.c" |
| |
| /* get the mapped name if the unit matches */ |
| static int check_mapped_name(mixer_build_t *state, int unitid, int control, char *buf, int buflen) |
| { |
| const struct usbmix_name_map *p; |
| |
| if (! state->map) |
| return 0; |
| |
| for (p = state->map; p->id; p++) { |
| if (p->id == unitid && p->name && |
| (! control || ! p->control || control == p->control)) { |
| buflen--; |
| return strlcpy(buf, p->name, buflen); |
| } |
| } |
| return 0; |
| } |
| |
| /* check whether the control should be ignored */ |
| static int check_ignored_ctl(mixer_build_t *state, int unitid, int control) |
| { |
| const struct usbmix_name_map *p; |
| |
| if (! state->map) |
| return 0; |
| for (p = state->map; p->id; p++) { |
| if (p->id == unitid && ! p->name && |
| (! control || ! p->control || control == p->control)) { |
| // printk("ignored control %d:%d\n", unitid, control); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * find an audio control unit with the given unit id |
| */ |
| static void *find_audio_control_unit(mixer_build_t *state, unsigned char unit) |
| { |
| unsigned char *p; |
| |
| p = NULL; |
| while ((p = snd_usb_find_desc(state->buffer, state->buflen, p, |
| USB_DT_CS_INTERFACE)) != NULL) { |
| if (p[0] >= 4 && p[2] >= INPUT_TERMINAL && p[2] <= EXTENSION_UNIT && p[3] == unit) |
| return p; |
| } |
| return NULL; |
| } |
| |
| |
| /* |
| * copy a string with the given id |
| */ |
| static int snd_usb_copy_string_desc(mixer_build_t *state, int index, char *buf, int maxlen) |
| { |
| int len = usb_string(state->chip->dev, index, buf, maxlen - 1); |
| buf[len] = 0; |
| return len; |
| } |
| |
| /* |
| * convert from the byte/word on usb descriptor to the zero-based integer |
| */ |
| static int convert_signed_value(usb_mixer_elem_info_t *cval, int val) |
| { |
| switch (cval->val_type) { |
| case USB_MIXER_BOOLEAN: |
| return !!val; |
| case USB_MIXER_INV_BOOLEAN: |
| return !val; |
| case USB_MIXER_U8: |
| val &= 0xff; |
| break; |
| case USB_MIXER_S8: |
| val &= 0xff; |
| if (val >= 0x80) |
| val -= 0x100; |
| break; |
| case USB_MIXER_U16: |
| val &= 0xffff; |
| break; |
| case USB_MIXER_S16: |
| val &= 0xffff; |
| if (val >= 0x8000) |
| val -= 0x10000; |
| break; |
| } |
| return val; |
| } |
| |
| /* |
| * convert from the zero-based int to the byte/word for usb descriptor |
| */ |
| static int convert_bytes_value(usb_mixer_elem_info_t *cval, int val) |
| { |
| switch (cval->val_type) { |
| case USB_MIXER_BOOLEAN: |
| return !!val; |
| case USB_MIXER_INV_BOOLEAN: |
| return !val; |
| case USB_MIXER_S8: |
| case USB_MIXER_U8: |
| return val & 0xff; |
| case USB_MIXER_S16: |
| case USB_MIXER_U16: |
| return val & 0xffff; |
| } |
| return 0; /* not reached */ |
| } |
| |
| static int get_relative_value(usb_mixer_elem_info_t *cval, int val) |
| { |
| if (! cval->res) |
| cval->res = 1; |
| if (val < cval->min) |
| return 0; |
| else if (val > cval->max) |
| return (cval->max - cval->min) / cval->res; |
| else |
| return (val - cval->min) / cval->res; |
| } |
| |
| static int get_abs_value(usb_mixer_elem_info_t *cval, int val) |
| { |
| if (val < 0) |
| return cval->min; |
| if (! cval->res) |
| cval->res = 1; |
| val *= cval->res; |
| val += cval->min; |
| if (val > cval->max) |
| return cval->max; |
| return val; |
| } |
| |
| |
| /* |
| * retrieve a mixer value |
| */ |
| |
| static int get_ctl_value(usb_mixer_elem_info_t *cval, int request, int validx, int *value_ret) |
| { |
| unsigned char buf[2]; |
| int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; |
| int timeout = 10; |
| |
| while (timeout-- > 0) { |
| if (snd_usb_ctl_msg(cval->chip->dev, usb_rcvctrlpipe(cval->chip->dev, 0), |
| request, |
| USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, |
| validx, cval->ctrlif | (cval->id << 8), |
| buf, val_len, 100) >= 0) { |
| *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len)); |
| return 0; |
| } |
| } |
| snd_printdd(KERN_ERR "cannot get ctl value: req = 0x%x, wValue = 0x%x, wIndex = 0x%x, type = %d\n", request, validx, cval->ctrlif | (cval->id << 8), cval->val_type); |
| return -EINVAL; |
| } |
| |
| static int get_cur_ctl_value(usb_mixer_elem_info_t *cval, int validx, int *value) |
| { |
| return get_ctl_value(cval, GET_CUR, validx, value); |
| } |
| |
| /* channel = 0: master, 1 = first channel */ |
| inline static int get_cur_mix_value(usb_mixer_elem_info_t *cval, int channel, int *value) |
| { |
| return get_ctl_value(cval, GET_CUR, (cval->control << 8) | channel, value); |
| } |
| |
| /* |
| * set a mixer value |
| */ |
| |
| static int set_ctl_value(usb_mixer_elem_info_t *cval, int request, int validx, int value_set) |
| { |
| unsigned char buf[2]; |
| int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; |
| int timeout = 10; |
| |
| value_set = convert_bytes_value(cval, value_set); |
| buf[0] = value_set & 0xff; |
| buf[1] = (value_set >> 8) & 0xff; |
| while (timeout -- > 0) |
| if (snd_usb_ctl_msg(cval->chip->dev, usb_sndctrlpipe(cval->chip->dev, 0), |
| request, |
| USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, |
| validx, cval->ctrlif | (cval->id << 8), |
| buf, val_len, 100) >= 0) |
| return 0; |
| snd_printdd(KERN_ERR "cannot set ctl value: req = 0x%x, wValue = 0x%x, wIndex = 0x%x, type = %d, data = 0x%x/0x%x\n", request, validx, cval->ctrlif | (cval->id << 8), cval->val_type, buf[0], buf[1]); |
| return -EINVAL; |
| } |
| |
| static int set_cur_ctl_value(usb_mixer_elem_info_t *cval, int validx, int value) |
| { |
| return set_ctl_value(cval, SET_CUR, validx, value); |
| } |
| |
| inline static int set_cur_mix_value(usb_mixer_elem_info_t *cval, int channel, int value) |
| { |
| return set_ctl_value(cval, SET_CUR, (cval->control << 8) | channel, value); |
| } |
| |
| |
| /* |
| * parser routines begin here... |
| */ |
| |
| static int parse_audio_unit(mixer_build_t *state, int unitid); |
| |
| |
| /* |
| * check if the input/output channel routing is enabled on the given bitmap. |
| * used for mixer unit parser |
| */ |
| static int check_matrix_bitmap(unsigned char *bmap, int ich, int och, int num_outs) |
| { |
| int idx = ich * num_outs + och; |
| return bmap[idx >> 3] & (0x80 >> (idx & 7)); |
| } |
| |
| |
| /* |
| * add an alsa control element |
| * search and increment the index until an empty slot is found. |
| * |
| * if failed, give up and free the control instance. |
| */ |
| |
| static int add_control_to_empty(snd_card_t *card, snd_kcontrol_t *kctl) |
| { |
| int err; |
| while (snd_ctl_find_id(card, &kctl->id)) |
| kctl->id.index++; |
| if ((err = snd_ctl_add(card, kctl)) < 0) { |
| snd_printd(KERN_ERR "cannot add control (err = %d)\n", err); |
| snd_ctl_free_one(kctl); |
| } |
| return err; |
| } |
| |
| |
| /* |
| * get a terminal name string |
| */ |
| |
| static struct iterm_name_combo { |
| int type; |
| char *name; |
| } iterm_names[] = { |
| { 0x0300, "Output" }, |
| { 0x0301, "Speaker" }, |
| { 0x0302, "Headphone" }, |
| { 0x0303, "HMD Audio" }, |
| { 0x0304, "Desktop Speaker" }, |
| { 0x0305, "Room Speaker" }, |
| { 0x0306, "Com Speaker" }, |
| { 0x0307, "LFE" }, |
| { 0x0600, "External In" }, |
| { 0x0601, "Analog In" }, |
| { 0x0602, "Digital In" }, |
| { 0x0603, "Line" }, |
| { 0x0604, "Legacy In" }, |
| { 0x0605, "IEC958 In" }, |
| { 0x0606, "1394 DA Stream" }, |
| { 0x0607, "1394 DV Stream" }, |
| { 0x0700, "Embedded" }, |
| { 0x0701, "Noise Source" }, |
| { 0x0702, "Equalization Noise" }, |
| { 0x0703, "CD" }, |
| { 0x0704, "DAT" }, |
| { 0x0705, "DCC" }, |
| { 0x0706, "MiniDisk" }, |
| { 0x0707, "Analog Tape" }, |
| { 0x0708, "Phonograph" }, |
| { 0x0709, "VCR Audio" }, |
| { 0x070a, "Video Disk Audio" }, |
| { 0x070b, "DVD Audio" }, |
| { 0x070c, "TV Tuner Audio" }, |
| { 0x070d, "Satellite Rec Audio" }, |
| { 0x070e, "Cable Tuner Audio" }, |
| { 0x070f, "DSS Audio" }, |
| { 0x0710, "Radio Receiver" }, |
| { 0x0711, "Radio Transmitter" }, |
| { 0x0712, "Multi-Track Recorder" }, |
| { 0x0713, "Synthesizer" }, |
| { 0 }, |
| }; |
| |
| static int get_term_name(mixer_build_t *state, usb_audio_term_t *iterm, |
| unsigned char *name, int maxlen, int term_only) |
| { |
| struct iterm_name_combo *names; |
| |
| if (iterm->name) |
| return snd_usb_copy_string_desc(state, iterm->name, name, maxlen); |
| |
| /* virtual type - not a real terminal */ |
| if (iterm->type >> 16) { |
| if (term_only) |
| return 0; |
| switch (iterm->type >> 16) { |
| case SELECTOR_UNIT: |
| strcpy(name, "Selector"); return 8; |
| case PROCESSING_UNIT: |
| strcpy(name, "Process Unit"); return 12; |
| case EXTENSION_UNIT: |
| strcpy(name, "Ext Unit"); return 8; |
| case MIXER_UNIT: |
| strcpy(name, "Mixer"); return 5; |
| default: |
| return sprintf(name, "Unit %d", iterm->id); |
| } |
| } |
| |
| switch (iterm->type & 0xff00) { |
| case 0x0100: |
| strcpy(name, "PCM"); return 3; |
| case 0x0200: |
| strcpy(name, "Mic"); return 3; |
| case 0x0400: |
| strcpy(name, "Headset"); return 7; |
| case 0x0500: |
| strcpy(name, "Phone"); return 5; |
| } |
| |
| for (names = iterm_names; names->type; names++) |
| if (names->type == iterm->type) { |
| strcpy(name, names->name); |
| return strlen(names->name); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * parse the source unit recursively until it reaches to a terminal |
| * or a branched unit. |
| */ |
| static int check_input_term(mixer_build_t *state, int id, usb_audio_term_t *term) |
| { |
| unsigned char *p1; |
| |
| memset(term, 0, sizeof(*term)); |
| while ((p1 = find_audio_control_unit(state, id)) != NULL) { |
| term->id = id; |
| switch (p1[2]) { |
| case INPUT_TERMINAL: |
| term->type = combine_word(p1 + 4); |
| term->channels = p1[7]; |
| term->chconfig = combine_word(p1 + 8); |
| term->name = p1[11]; |
| return 0; |
| case FEATURE_UNIT: |
| id = p1[4]; |
| break; /* continue to parse */ |
| case MIXER_UNIT: |
| term->type = p1[2] << 16; /* virtual type */ |
| term->channels = p1[5 + p1[4]]; |
| term->chconfig = combine_word(p1 + 6 + p1[4]); |
| term->name = p1[p1[0] - 1]; |
| return 0; |
| case SELECTOR_UNIT: |
| /* call recursively to retrieve the channel info */ |
| if (check_input_term(state, p1[5], term) < 0) |
| return -ENODEV; |
| term->type = p1[2] << 16; /* virtual type */ |
| term->id = id; |
| term->name = p1[9 + p1[0] - 1]; |
| return 0; |
| case PROCESSING_UNIT: |
| case EXTENSION_UNIT: |
| if (p1[6] == 1) { |
| id = p1[7]; |
| break; /* continue to parse */ |
| } |
| term->type = p1[2] << 16; /* virtual type */ |
| term->channels = p1[7 + p1[6]]; |
| term->chconfig = combine_word(p1 + 8 + p1[6]); |
| term->name = p1[12 + p1[6] + p1[11 + p1[6]]]; |
| return 0; |
| default: |
| return -ENODEV; |
| } |
| } |
| return -ENODEV; |
| } |
| |
| |
| /* |
| * Feature Unit |
| */ |
| |
| /* feature unit control information */ |
| struct usb_feature_control_info { |
| const char *name; |
| unsigned int type; /* control type (mute, volume, etc.) */ |
| }; |
| |
| static struct usb_feature_control_info audio_feature_info[] = { |
| { "Mute", USB_MIXER_INV_BOOLEAN }, |
| { "Volume", USB_MIXER_S16 }, |
| { "Tone Control - Bass", USB_MIXER_S8 }, |
| { "Tone Control - Mid", USB_MIXER_S8 }, |
| { "Tone Control - Treble", USB_MIXER_S8 }, |
| { "Graphic Equalizer", USB_MIXER_S8 }, /* FIXME: not implemeted yet */ |
| { "Auto Gain Control", USB_MIXER_BOOLEAN }, |
| { "Delay Control", USB_MIXER_U16 }, |
| { "Bass Boost", USB_MIXER_BOOLEAN }, |
| { "Loudness", USB_MIXER_BOOLEAN }, |
| }; |
| |
| |
| /* private_free callback */ |
| static void usb_mixer_elem_free(snd_kcontrol_t *kctl) |
| { |
| if (kctl->private_data) { |
| kfree(kctl->private_data); |
| kctl->private_data = NULL; |
| } |
| } |
| |
| |
| /* |
| * interface to ALSA control for feature/mixer units |
| */ |
| |
| /* |
| * retrieve the minimum and maximum values for the specified control |
| */ |
| static int get_min_max(usb_mixer_elem_info_t *cval, int default_min) |
| { |
| /* for failsafe */ |
| cval->min = default_min; |
| cval->max = cval->min + 1; |
| cval->res = 1; |
| |
| if (cval->val_type == USB_MIXER_BOOLEAN || |
| cval->val_type == USB_MIXER_INV_BOOLEAN) { |
| cval->initialized = 1; |
| } else { |
| int minchn = 0; |
| if (cval->cmask) { |
| int i; |
| for (i = 0; i < MAX_CHANNELS; i++) |
| if (cval->cmask & (1 << i)) { |
| minchn = i + 1; |
| break; |
| } |
| } |
| if (get_ctl_value(cval, GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 || |
| get_ctl_value(cval, GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) { |
| snd_printd(KERN_ERR "%d:%d: cannot get min/max values for control %d (id %d)\n", cval->id, cval->ctrlif, cval->control, cval->id); |
| return -EINVAL; |
| } |
| if (get_ctl_value(cval, GET_RES, (cval->control << 8) | minchn, &cval->res) < 0) { |
| cval->res = 1; |
| } else { |
| int last_valid_res = cval->res; |
| |
| while (cval->res > 1) { |
| if (set_ctl_value(cval, SET_RES, (cval->control << 8) | minchn, cval->res / 2) < 0) |
| break; |
| cval->res /= 2; |
| } |
| if (get_ctl_value(cval, GET_RES, (cval->control << 8) | minchn, &cval->res) < 0) |
| cval->res = last_valid_res; |
| } |
| if (cval->res == 0) |
| cval->res = 1; |
| cval->initialized = 1; |
| } |
| return 0; |
| } |
| |
| |
| /* get a feature/mixer unit info */ |
| static int mixer_ctl_feature_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| |
| if (cval->val_type == USB_MIXER_BOOLEAN || |
| cval->val_type == USB_MIXER_INV_BOOLEAN) |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| else |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = cval->channels; |
| if (cval->val_type == USB_MIXER_BOOLEAN || |
| cval->val_type == USB_MIXER_INV_BOOLEAN) { |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| } else { |
| if (! cval->initialized) |
| get_min_max(cval, 0); |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = (cval->max - cval->min) / cval->res; |
| } |
| return 0; |
| } |
| |
| /* get the current value from feature/mixer unit */ |
| static int mixer_ctl_feature_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| int c, cnt, val, err; |
| |
| if (cval->cmask) { |
| cnt = 0; |
| for (c = 0; c < MAX_CHANNELS; c++) { |
| if (cval->cmask & (1 << c)) { |
| err = get_cur_mix_value(cval, c + 1, &val); |
| if (err < 0) { |
| if (cval->chip->ignore_ctl_error) { |
| ucontrol->value.integer.value[0] = cval->min; |
| return 0; |
| } |
| snd_printd(KERN_ERR "cannot get current value for control %d ch %d: err = %d\n", cval->control, c + 1, err); |
| return err; |
| } |
| val = get_relative_value(cval, val); |
| ucontrol->value.integer.value[cnt] = val; |
| cnt++; |
| } |
| } |
| } else { |
| /* master channel */ |
| err = get_cur_mix_value(cval, 0, &val); |
| if (err < 0) { |
| if (cval->chip->ignore_ctl_error) { |
| ucontrol->value.integer.value[0] = cval->min; |
| return 0; |
| } |
| snd_printd(KERN_ERR "cannot get current value for control %d master ch: err = %d\n", cval->control, err); |
| return err; |
| } |
| val = get_relative_value(cval, val); |
| ucontrol->value.integer.value[0] = val; |
| } |
| return 0; |
| } |
| |
| /* put the current value to feature/mixer unit */ |
| static int mixer_ctl_feature_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| int c, cnt, val, oval, err; |
| int changed = 0; |
| |
| if (cval->cmask) { |
| cnt = 0; |
| for (c = 0; c < MAX_CHANNELS; c++) { |
| if (cval->cmask & (1 << c)) { |
| err = get_cur_mix_value(cval, c + 1, &oval); |
| if (err < 0) { |
| if (cval->chip->ignore_ctl_error) |
| return 0; |
| return err; |
| } |
| val = ucontrol->value.integer.value[cnt]; |
| val = get_abs_value(cval, val); |
| if (oval != val) { |
| set_cur_mix_value(cval, c + 1, val); |
| changed = 1; |
| } |
| get_cur_mix_value(cval, c + 1, &val); |
| cnt++; |
| } |
| } |
| } else { |
| /* master channel */ |
| err = get_cur_mix_value(cval, 0, &oval); |
| if (err < 0 && cval->chip->ignore_ctl_error) |
| return 0; |
| if (err < 0) |
| return err; |
| val = ucontrol->value.integer.value[0]; |
| val = get_abs_value(cval, val); |
| if (val != oval) { |
| set_cur_mix_value(cval, 0, val); |
| changed = 1; |
| } |
| } |
| return changed; |
| } |
| |
| static snd_kcontrol_new_t usb_feature_unit_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", /* will be filled later manually */ |
| .info = mixer_ctl_feature_info, |
| .get = mixer_ctl_feature_get, |
| .put = mixer_ctl_feature_put, |
| }; |
| |
| |
| /* |
| * build a feature control |
| */ |
| |
| static void build_feature_ctl(mixer_build_t *state, unsigned char *desc, |
| unsigned int ctl_mask, int control, |
| usb_audio_term_t *iterm, int unitid) |
| { |
| unsigned int len = 0; |
| int mapped_name = 0; |
| int nameid = desc[desc[0] - 1]; |
| snd_kcontrol_t *kctl; |
| usb_mixer_elem_info_t *cval; |
| |
| control++; /* change from zero-based to 1-based value */ |
| |
| if (control == USB_FEATURE_GEQ) { |
| /* FIXME: not supported yet */ |
| return; |
| } |
| |
| if (check_ignored_ctl(state, unitid, control)) |
| return; |
| |
| cval = kcalloc(1, sizeof(*cval), GFP_KERNEL); |
| if (! cval) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| return; |
| } |
| cval->chip = state->chip; |
| cval->ctrlif = state->ctrlif; |
| cval->id = unitid; |
| cval->control = control; |
| cval->cmask = ctl_mask; |
| cval->val_type = audio_feature_info[control-1].type; |
| if (ctl_mask == 0) |
| cval->channels = 1; /* master channel */ |
| else { |
| int i, c = 0; |
| for (i = 0; i < 16; i++) |
| if (ctl_mask & (1 << i)) |
| c++; |
| cval->channels = c; |
| } |
| |
| /* get min/max values */ |
| get_min_max(cval, 0); |
| |
| kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval); |
| if (! kctl) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| kfree(cval); |
| return; |
| } |
| kctl->private_free = usb_mixer_elem_free; |
| |
| len = check_mapped_name(state, unitid, control, kctl->id.name, sizeof(kctl->id.name)); |
| mapped_name = len != 0; |
| if (! len && nameid) |
| len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); |
| |
| switch (control) { |
| case USB_FEATURE_MUTE: |
| case USB_FEATURE_VOLUME: |
| /* determine the control name. the rule is: |
| * - if a name id is given in descriptor, use it. |
| * - if the connected input can be determined, then use the name |
| * of terminal type. |
| * - if the connected output can be determined, use it. |
| * - otherwise, anonymous name. |
| */ |
| if (! len) { |
| len = get_term_name(state, iterm, kctl->id.name, sizeof(kctl->id.name), 1); |
| if (! len) |
| len = get_term_name(state, &state->oterm, kctl->id.name, sizeof(kctl->id.name), 1); |
| if (! len) |
| len = snprintf(kctl->id.name, sizeof(kctl->id.name), |
| "Feature %d", unitid); |
| } |
| /* determine the stream direction: |
| * if the connected output is USB stream, then it's likely a |
| * capture stream. otherwise it should be playback (hopefully :) |
| */ |
| if (! mapped_name && ! (state->oterm.type >> 16)) { |
| if ((state->oterm.type & 0xff00) == 0x0100) { |
| len = strlcat(kctl->id.name, " Capture", sizeof(kctl->id.name)); |
| } else { |
| len = strlcat(kctl->id.name + len, " Playback", sizeof(kctl->id.name)); |
| } |
| } |
| strlcat(kctl->id.name + len, control == USB_FEATURE_MUTE ? " Switch" : " Volume", |
| sizeof(kctl->id.name)); |
| break; |
| |
| default: |
| if (! len) |
| strlcpy(kctl->id.name, audio_feature_info[control-1].name, |
| sizeof(kctl->id.name)); |
| break; |
| } |
| |
| /* quirk for UDA1321/N101 */ |
| /* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */ |
| /* is not very clear from datasheets */ |
| /* I hope that the min value is -15360 for newer firmware --jk */ |
| if (((state->vendor == 0x471 && (state->product == 0x104 || state->product == 0x105 || state->product == 0x101)) || |
| (state->vendor == 0x672 && state->product == 0x1041)) && !strcmp(kctl->id.name, "PCM Playback Volume") && |
| cval->min == -15616) { |
| snd_printk("USB Audio: using volume control quirk for the UDA1321/N101 chip\n"); |
| cval->max = -256; |
| } |
| |
| snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n", |
| cval->id, kctl->id.name, cval->channels, cval->min, cval->max, cval->res); |
| add_control_to_empty(state->chip->card, kctl); |
| } |
| |
| |
| |
| /* |
| * parse a feature unit |
| * |
| * most of controlls are defined here. |
| */ |
| static int parse_audio_feature_unit(mixer_build_t *state, int unitid, unsigned char *ftr) |
| { |
| int channels, i, j; |
| usb_audio_term_t iterm; |
| unsigned int master_bits, first_ch_bits; |
| int err, csize; |
| |
| if (ftr[0] < 7 || ! (csize = ftr[5]) || ftr[0] < 7 + csize) { |
| snd_printk(KERN_ERR "usbaudio: unit %u: invalid FEATURE_UNIT descriptor\n", unitid); |
| return -EINVAL; |
| } |
| |
| /* parse the source unit */ |
| if ((err = parse_audio_unit(state, ftr[4])) < 0) |
| return err; |
| |
| /* determine the input source type and name */ |
| if (check_input_term(state, ftr[4], &iterm) < 0) |
| return -EINVAL; |
| |
| channels = (ftr[0] - 7) / csize - 1; |
| |
| master_bits = snd_usb_combine_bytes(ftr + 6, csize); |
| if (channels > 0) |
| first_ch_bits = snd_usb_combine_bytes(ftr + 6 + csize, csize); |
| else |
| first_ch_bits = 0; |
| /* check all control types */ |
| for (i = 0; i < 10; i++) { |
| unsigned int ch_bits = 0; |
| for (j = 0; j < channels; j++) { |
| unsigned int mask = snd_usb_combine_bytes(ftr + 6 + csize * (j+1), csize); |
| if (mask & (1 << i)) |
| ch_bits |= (1 << j); |
| } |
| if (ch_bits & 1) /* the first channel must be set (for ease of programming) */ |
| build_feature_ctl(state, ftr, ch_bits, i, &iterm, unitid); |
| if (master_bits & (1 << i)) |
| build_feature_ctl(state, ftr, 0, i, &iterm, unitid); |
| } |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Mixer Unit |
| */ |
| |
| /* |
| * build a mixer unit control |
| * |
| * the callbacks are identical with feature unit. |
| * input channel number (zero based) is given in control field instead. |
| */ |
| |
| static void build_mixer_unit_ctl(mixer_build_t *state, unsigned char *desc, |
| int in_pin, int in_ch, int unitid, |
| usb_audio_term_t *iterm) |
| { |
| usb_mixer_elem_info_t *cval; |
| unsigned int input_pins = desc[4]; |
| unsigned int num_outs = desc[5 + input_pins]; |
| unsigned int i, len; |
| snd_kcontrol_t *kctl; |
| |
| if (check_ignored_ctl(state, unitid, 0)) |
| return; |
| |
| cval = kcalloc(1, sizeof(*cval), GFP_KERNEL); |
| if (! cval) |
| return; |
| |
| cval->chip = state->chip; |
| cval->ctrlif = state->ctrlif; |
| cval->id = unitid; |
| cval->control = in_ch + 1; /* based on 1 */ |
| cval->val_type = USB_MIXER_S16; |
| for (i = 0; i < num_outs; i++) { |
| if (check_matrix_bitmap(desc + 9 + input_pins, in_ch, i, num_outs)) { |
| cval->cmask |= (1 << i); |
| cval->channels++; |
| } |
| } |
| |
| /* get min/max values */ |
| get_min_max(cval, 0); |
| |
| kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval); |
| if (! kctl) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| kfree(cval); |
| return; |
| } |
| kctl->private_free = usb_mixer_elem_free; |
| |
| len = check_mapped_name(state, unitid, 0, kctl->id.name, sizeof(kctl->id.name)); |
| if (! len) |
| len = get_term_name(state, iterm, kctl->id.name, sizeof(kctl->id.name), 0); |
| if (! len) |
| len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1); |
| strlcat(kctl->id.name + len, " Volume", sizeof(kctl->id.name)); |
| |
| snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n", |
| cval->id, kctl->id.name, cval->channels, cval->min, cval->max); |
| add_control_to_empty(state->chip->card, kctl); |
| } |
| |
| |
| /* |
| * parse a mixer unit |
| */ |
| static int parse_audio_mixer_unit(mixer_build_t *state, int unitid, unsigned char *desc) |
| { |
| usb_audio_term_t iterm; |
| int input_pins, num_ins, num_outs; |
| int pin, ich, err; |
| |
| if (desc[0] < 11 || ! (input_pins = desc[4]) || ! (num_outs = desc[5 + input_pins])) { |
| snd_printk(KERN_ERR "invalid MIXER UNIT descriptor %d\n", unitid); |
| return -EINVAL; |
| } |
| /* no bmControls field (e.g. Maya44) -> ignore */ |
| if (desc[0] <= 10 + input_pins) { |
| snd_printdd(KERN_INFO "MU %d has no bmControls field\n", unitid); |
| return 0; |
| } |
| |
| num_ins = 0; |
| ich = 0; |
| for (pin = 0; pin < input_pins; pin++) { |
| err = parse_audio_unit(state, desc[5 + pin]); |
| if (err < 0) |
| return err; |
| err = check_input_term(state, desc[5 + pin], &iterm); |
| if (err < 0) |
| return err; |
| num_ins += iterm.channels; |
| for (; ich < num_ins; ++ich) { |
| int och, ich_has_controls = 0; |
| |
| for (och = 0; och < num_outs; ++och) { |
| if (check_matrix_bitmap(desc + 9 + input_pins, |
| ich, och, num_outs)) { |
| ich_has_controls = 1; |
| break; |
| } |
| } |
| if (ich_has_controls) |
| build_mixer_unit_ctl(state, desc, pin, ich, |
| unitid, &iterm); |
| } |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Processing Unit / Extension Unit |
| */ |
| |
| /* get callback for processing/extension unit */ |
| static int mixer_ctl_procunit_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| int err, val; |
| |
| err = get_cur_ctl_value(cval, cval->control << 8, &val); |
| if (err < 0 && cval->chip->ignore_ctl_error) { |
| ucontrol->value.integer.value[0] = cval->min; |
| return 0; |
| } |
| if (err < 0) |
| return err; |
| val = get_relative_value(cval, val); |
| ucontrol->value.integer.value[0] = val; |
| return 0; |
| } |
| |
| /* put callback for processing/extension unit */ |
| static int mixer_ctl_procunit_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| int val, oval, err; |
| |
| err = get_cur_ctl_value(cval, cval->control << 8, &oval); |
| if (err < 0) { |
| if (cval->chip->ignore_ctl_error) |
| return 0; |
| return err; |
| } |
| val = ucontrol->value.integer.value[0]; |
| val = get_abs_value(cval, val); |
| if (val != oval) { |
| set_cur_ctl_value(cval, cval->control << 8, val); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* alsa control interface for processing/extension unit */ |
| static snd_kcontrol_new_t mixer_procunit_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", /* will be filled later */ |
| .info = mixer_ctl_feature_info, |
| .get = mixer_ctl_procunit_get, |
| .put = mixer_ctl_procunit_put, |
| }; |
| |
| |
| /* |
| * predefined data for processing units |
| */ |
| struct procunit_value_info { |
| int control; |
| char *suffix; |
| int val_type; |
| int min_value; |
| }; |
| |
| struct procunit_info { |
| int type; |
| char *name; |
| struct procunit_value_info *values; |
| }; |
| |
| static struct procunit_value_info updown_proc_info[] = { |
| { USB_PROC_UPDOWN_SWITCH, "Switch", USB_MIXER_BOOLEAN }, |
| { USB_PROC_UPDOWN_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 }, |
| { 0 } |
| }; |
| static struct procunit_value_info prologic_proc_info[] = { |
| { USB_PROC_PROLOGIC_SWITCH, "Switch", USB_MIXER_BOOLEAN }, |
| { USB_PROC_PROLOGIC_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 }, |
| { 0 } |
| }; |
| static struct procunit_value_info threed_enh_proc_info[] = { |
| { USB_PROC_3DENH_SWITCH, "Switch", USB_MIXER_BOOLEAN }, |
| { USB_PROC_3DENH_SPACE, "Spaciousness", USB_MIXER_U8 }, |
| { 0 } |
| }; |
| static struct procunit_value_info reverb_proc_info[] = { |
| { USB_PROC_REVERB_SWITCH, "Switch", USB_MIXER_BOOLEAN }, |
| { USB_PROC_REVERB_LEVEL, "Level", USB_MIXER_U8 }, |
| { USB_PROC_REVERB_TIME, "Time", USB_MIXER_U16 }, |
| { USB_PROC_REVERB_DELAY, "Delay", USB_MIXER_U8 }, |
| { 0 } |
| }; |
| static struct procunit_value_info chorus_proc_info[] = { |
| { USB_PROC_CHORUS_SWITCH, "Switch", USB_MIXER_BOOLEAN }, |
| { USB_PROC_CHORUS_LEVEL, "Level", USB_MIXER_U8 }, |
| { USB_PROC_CHORUS_RATE, "Rate", USB_MIXER_U16 }, |
| { USB_PROC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 }, |
| { 0 } |
| }; |
| static struct procunit_value_info dcr_proc_info[] = { |
| { USB_PROC_DCR_SWITCH, "Switch", USB_MIXER_BOOLEAN }, |
| { USB_PROC_DCR_RATIO, "Ratio", USB_MIXER_U16 }, |
| { USB_PROC_DCR_MAX_AMP, "Max Amp", USB_MIXER_S16 }, |
| { USB_PROC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 }, |
| { USB_PROC_DCR_ATTACK, "Attack Time", USB_MIXER_U16 }, |
| { USB_PROC_DCR_RELEASE, "Release Time", USB_MIXER_U16 }, |
| { 0 } |
| }; |
| |
| static struct procunit_info procunits[] = { |
| { USB_PROC_UPDOWN, "Up Down", updown_proc_info }, |
| { USB_PROC_PROLOGIC, "Dolby Prologic", prologic_proc_info }, |
| { USB_PROC_3DENH, "3D Stereo Extender", threed_enh_proc_info }, |
| { USB_PROC_REVERB, "Reverb", reverb_proc_info }, |
| { USB_PROC_CHORUS, "Chorus", chorus_proc_info }, |
| { USB_PROC_DCR, "DCR", dcr_proc_info }, |
| { 0 }, |
| }; |
| |
| /* |
| * build a processing/extension unit |
| */ |
| static int build_audio_procunit(mixer_build_t *state, int unitid, unsigned char *dsc, struct procunit_info *list, char *name) |
| { |
| int num_ins = dsc[6]; |
| usb_mixer_elem_info_t *cval; |
| snd_kcontrol_t *kctl; |
| int i, err, nameid, type, len; |
| struct procunit_info *info; |
| struct procunit_value_info *valinfo; |
| static struct procunit_value_info default_value_info[] = { |
| { 0x01, "Switch", USB_MIXER_BOOLEAN }, |
| { 0 } |
| }; |
| static struct procunit_info default_info = { |
| 0, NULL, default_value_info |
| }; |
| |
| if (dsc[0] < 13 || dsc[0] < 13 + num_ins || dsc[0] < num_ins + dsc[11 + num_ins]) { |
| snd_printk(KERN_ERR "invalid %s descriptor (id %d)\n", name, unitid); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_ins; i++) { |
| if ((err = parse_audio_unit(state, dsc[7 + i])) < 0) |
| return err; |
| } |
| |
| type = combine_word(&dsc[4]); |
| if (! type) |
| return 0; /* undefined? */ |
| |
| for (info = list; info && info->type; info++) |
| if (info->type == type) |
| break; |
| if (! info || ! info->type) |
| info = &default_info; |
| |
| for (valinfo = info->values; valinfo->control; valinfo++) { |
| /* FIXME: bitmap might be longer than 8bit */ |
| if (! (dsc[12 + num_ins] & (1 << (valinfo->control - 1)))) |
| continue; |
| if (check_ignored_ctl(state, unitid, valinfo->control)) |
| continue; |
| cval = kcalloc(1, sizeof(*cval), GFP_KERNEL); |
| if (! cval) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| return -ENOMEM; |
| } |
| cval->chip = state->chip; |
| cval->ctrlif = state->ctrlif; |
| cval->id = unitid; |
| cval->control = valinfo->control; |
| cval->val_type = valinfo->val_type; |
| cval->channels = 1; |
| |
| /* get min/max values */ |
| if (type == USB_PROC_UPDOWN && cval->control == USB_PROC_UPDOWN_MODE_SEL) { |
| /* FIXME: hard-coded */ |
| cval->min = 1; |
| cval->max = dsc[15]; |
| cval->res = 1; |
| cval->initialized = 1; |
| } else |
| get_min_max(cval, valinfo->min_value); |
| |
| kctl = snd_ctl_new1(&mixer_procunit_ctl, cval); |
| if (! kctl) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| kfree(cval); |
| return -ENOMEM; |
| } |
| kctl->private_free = usb_mixer_elem_free; |
| |
| if (check_mapped_name(state, unitid, cval->control, kctl->id.name, sizeof(kctl->id.name))) |
| ; |
| else if (info->name) |
| strlcpy(kctl->id.name, info->name, sizeof(kctl->id.name)); |
| else { |
| nameid = dsc[12 + num_ins + dsc[11 + num_ins]]; |
| len = 0; |
| if (nameid) |
| len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); |
| if (! len) |
| strlcpy(kctl->id.name, name, sizeof(kctl->id.name)); |
| } |
| strlcat(kctl->id.name, " ", sizeof(kctl->id.name)); |
| strlcat(kctl->id.name, valinfo->suffix, sizeof(kctl->id.name)); |
| |
| snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n", |
| cval->id, kctl->id.name, cval->channels, cval->min, cval->max); |
| if ((err = add_control_to_empty(state->chip->card, kctl)) < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| |
| static int parse_audio_processing_unit(mixer_build_t *state, int unitid, unsigned char *desc) |
| { |
| return build_audio_procunit(state, unitid, desc, procunits, "Processing Unit"); |
| } |
| |
| static int parse_audio_extension_unit(mixer_build_t *state, int unitid, unsigned char *desc) |
| { |
| return build_audio_procunit(state, unitid, desc, NULL, "Extension Unit"); |
| } |
| |
| |
| /* |
| * Selector Unit |
| */ |
| |
| /* info callback for selector unit |
| * use an enumerator type for routing |
| */ |
| static int mixer_ctl_selector_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| char **itemlist = (char **)kcontrol->private_value; |
| |
| snd_assert(itemlist, return -EINVAL); |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = cval->max; |
| if ((int)uinfo->value.enumerated.item >= cval->max) |
| uinfo->value.enumerated.item = cval->max - 1; |
| strcpy(uinfo->value.enumerated.name, itemlist[uinfo->value.enumerated.item]); |
| return 0; |
| } |
| |
| /* get callback for selector unit */ |
| static int mixer_ctl_selector_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| int val, err; |
| |
| err = get_cur_ctl_value(cval, 0, &val); |
| if (err < 0) { |
| if (cval->chip->ignore_ctl_error) { |
| ucontrol->value.enumerated.item[0] = 0; |
| return 0; |
| } |
| return err; |
| } |
| val = get_relative_value(cval, val); |
| ucontrol->value.enumerated.item[0] = val; |
| return 0; |
| } |
| |
| /* put callback for selector unit */ |
| static int mixer_ctl_selector_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| usb_mixer_elem_info_t *cval = kcontrol->private_data; |
| int val, oval, err; |
| |
| err = get_cur_ctl_value(cval, 0, &oval); |
| if (err < 0) { |
| if (cval->chip->ignore_ctl_error) |
| return 0; |
| return err; |
| } |
| val = ucontrol->value.enumerated.item[0]; |
| val = get_abs_value(cval, val); |
| if (val != oval) { |
| set_cur_ctl_value(cval, 0, val); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* alsa control interface for selector unit */ |
| static snd_kcontrol_new_t mixer_selectunit_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", /* will be filled later */ |
| .info = mixer_ctl_selector_info, |
| .get = mixer_ctl_selector_get, |
| .put = mixer_ctl_selector_put, |
| }; |
| |
| |
| /* private free callback. |
| * free both private_data and private_value |
| */ |
| static void usb_mixer_selector_elem_free(snd_kcontrol_t *kctl) |
| { |
| int i, num_ins = 0; |
| |
| if (kctl->private_data) { |
| usb_mixer_elem_info_t *cval = kctl->private_data; |
| num_ins = cval->max; |
| kfree(cval); |
| kctl->private_data = NULL; |
| } |
| if (kctl->private_value) { |
| char **itemlist = (char **)kctl->private_value; |
| for (i = 0; i < num_ins; i++) |
| kfree(itemlist[i]); |
| kfree(itemlist); |
| kctl->private_value = 0; |
| } |
| } |
| |
| /* |
| * parse a selector unit |
| */ |
| static int parse_audio_selector_unit(mixer_build_t *state, int unitid, unsigned char *desc) |
| { |
| unsigned int num_ins = desc[4]; |
| unsigned int i, nameid, len; |
| int err; |
| usb_mixer_elem_info_t *cval; |
| snd_kcontrol_t *kctl; |
| char **namelist; |
| |
| if (! num_ins || desc[0] < 6 + num_ins) { |
| snd_printk(KERN_ERR "invalid SELECTOR UNIT descriptor %d\n", unitid); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_ins; i++) { |
| if ((err = parse_audio_unit(state, desc[5 + i])) < 0) |
| return err; |
| } |
| |
| if (num_ins == 1) /* only one ? nonsense! */ |
| return 0; |
| |
| if (check_ignored_ctl(state, unitid, 0)) |
| return 0; |
| |
| cval = kcalloc(1, sizeof(*cval), GFP_KERNEL); |
| if (! cval) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| return -ENOMEM; |
| } |
| cval->chip = state->chip; |
| cval->ctrlif = state->ctrlif; |
| cval->id = unitid; |
| cval->val_type = USB_MIXER_U8; |
| cval->channels = 1; |
| cval->min = 1; |
| cval->max = num_ins; |
| cval->res = 1; |
| cval->initialized = 1; |
| |
| namelist = kmalloc(sizeof(char *) * num_ins, GFP_KERNEL); |
| if (! namelist) { |
| snd_printk(KERN_ERR "cannot malloc\n"); |
| kfree(cval); |
| return -ENOMEM; |
| } |
| #define MAX_ITEM_NAME_LEN 64 |
| for (i = 0; i < num_ins; i++) { |
| usb_audio_term_t iterm; |
| len = 0; |
| namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL); |
| if (! namelist[i]) { |
| snd_printk(KERN_ERR "cannot malloc\n"); |
| while (--i > 0) |
| kfree(namelist[i]); |
| kfree(namelist); |
| kfree(cval); |
| return -ENOMEM; |
| } |
| if (check_input_term(state, desc[5 + i], &iterm) >= 0) |
| len = get_term_name(state, &iterm, namelist[i], MAX_ITEM_NAME_LEN, 0); |
| if (! len) |
| sprintf(namelist[i], "Input %d", i); |
| } |
| |
| kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval); |
| if (! kctl) { |
| snd_printk(KERN_ERR "cannot malloc kcontrol\n"); |
| kfree(cval); |
| return -ENOMEM; |
| } |
| kctl->private_value = (unsigned long)namelist; |
| kctl->private_free = usb_mixer_selector_elem_free; |
| |
| nameid = desc[desc[0] - 1]; |
| len = check_mapped_name(state, unitid, 0, kctl->id.name, sizeof(kctl->id.name)); |
| if (len) |
| ; |
| else if (nameid) |
| snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); |
| else { |
| len = get_term_name(state, &state->oterm, |
| kctl->id.name, sizeof(kctl->id.name), 0); |
| if (! len) |
| strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name)); |
| |
| if ((state->oterm.type & 0xff00) == 0x0100) |
| strlcat(kctl->id.name, " Capture Source", sizeof(kctl->id.name)); |
| else |
| strlcat(kctl->id.name, " Playback Source", sizeof(kctl->id.name)); |
| } |
| |
| snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n", |
| cval->id, kctl->id.name, num_ins); |
| if ((err = add_control_to_empty(state->chip->card, kctl)) < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * parse an audio unit recursively |
| */ |
| |
| static int parse_audio_unit(mixer_build_t *state, int unitid) |
| { |
| unsigned char *p1; |
| |
| if (test_and_set_bit(unitid, state->unitbitmap)) |
| return 0; /* the unit already visited */ |
| |
| p1 = find_audio_control_unit(state, unitid); |
| if (!p1) { |
| snd_printk(KERN_ERR "usbaudio: unit %d not found!\n", unitid); |
| return -EINVAL; |
| } |
| |
| switch (p1[2]) { |
| case INPUT_TERMINAL: |
| return 0; /* NOP */ |
| case MIXER_UNIT: |
| return parse_audio_mixer_unit(state, unitid, p1); |
| case SELECTOR_UNIT: |
| return parse_audio_selector_unit(state, unitid, p1); |
| case FEATURE_UNIT: |
| return parse_audio_feature_unit(state, unitid, p1); |
| case PROCESSING_UNIT: |
| return parse_audio_processing_unit(state, unitid, p1); |
| case EXTENSION_UNIT: |
| return parse_audio_extension_unit(state, unitid, p1); |
| default: |
| snd_printk(KERN_ERR "usbaudio: unit %u: unexpected type 0x%02x\n", unitid, p1[2]); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * create mixer controls |
| * |
| * walk through all OUTPUT_TERMINAL descriptors to search for mixers |
| */ |
| int snd_usb_create_mixer(snd_usb_audio_t *chip, int ctrlif) |
| { |
| unsigned char *desc; |
| mixer_build_t state; |
| int err; |
| const struct usbmix_ctl_map *map; |
| struct usb_device_descriptor *dev = &chip->dev->descriptor; |
| struct usb_host_interface *hostif = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0]; |
| |
| strcpy(chip->card->mixername, "USB Mixer"); |
| |
| memset(&state, 0, sizeof(state)); |
| state.chip = chip; |
| state.buffer = hostif->extra; |
| state.buflen = hostif->extralen; |
| state.ctrlif = ctrlif; |
| state.vendor = le16_to_cpu(dev->idVendor); |
| state.product = le16_to_cpu(dev->idProduct); |
| |
| /* check the mapping table */ |
| for (map = usbmix_ctl_maps; map->vendor; map++) { |
| if (map->vendor == state.vendor && map->product == state.product) { |
| state.map = map->map; |
| chip->ignore_ctl_error = map->ignore_ctl_error; |
| break; |
| } |
| } |
| #ifdef IGNORE_CTL_ERROR |
| chip->ignore_ctl_error = 1; |
| #endif |
| |
| desc = NULL; |
| while ((desc = snd_usb_find_csint_desc(hostif->extra, hostif->extralen, desc, OUTPUT_TERMINAL)) != NULL) { |
| if (desc[0] < 9) |
| continue; /* invalid descriptor? */ |
| set_bit(desc[3], state.unitbitmap); /* mark terminal ID as visited */ |
| state.oterm.id = desc[3]; |
| state.oterm.type = combine_word(&desc[4]); |
| state.oterm.name = desc[8]; |
| err = parse_audio_unit(&state, desc[7]); |
| if (err < 0) |
| return err; |
| } |
| return 0; |
| } |