| /* |
| * Copyright 2012 Linaro Ltd |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/mfd/dbx500-prcmu.h> |
| #include <dt-bindings/arm/ux500_pm_domains.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "stericsson,db8500"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| }; |
| }; |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| }; |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <1>; |
| }; |
| }; |
| |
| ptm@801ae000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x801ae000 0x1000>; |
| |
| clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; |
| clock-names = "apb_pclk", "atclk"; |
| cpu = <&CPU0>; |
| port { |
| ptm0_out_port: endpoint { |
| remote-endpoint = <&funnel_in_port0>; |
| }; |
| }; |
| }; |
| |
| ptm@801af000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x801af000 0x1000>; |
| |
| clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; |
| clock-names = "apb_pclk", "atclk"; |
| cpu = <&CPU1>; |
| port { |
| ptm1_out_port: endpoint { |
| remote-endpoint = <&funnel_in_port1>; |
| }; |
| }; |
| }; |
| |
| funnel@801a6000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x801a6000 0x1000>; |
| |
| clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; |
| clock-names = "apb_pclk", "atclk"; |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* funnel output ports */ |
| port@0 { |
| reg = <0>; |
| funnel_out_port: endpoint { |
| remote-endpoint = |
| <&replicator_in_port0>; |
| }; |
| }; |
| |
| /* funnel input ports */ |
| port@1 { |
| reg = <0>; |
| funnel_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&ptm0_out_port>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <1>; |
| funnel_in_port1: endpoint { |
| slave-mode; |
| remote-endpoint = <&ptm1_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator { |
| compatible = "arm,coresight-replicator"; |
| clocks = <&prcmu_clk PRCMU_APEATCLK>; |
| clock-names = "atclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* replicator output ports */ |
| port@0 { |
| reg = <0>; |
| replicator_out_port0: endpoint { |
| remote-endpoint = <&tpiu_in_port>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| replicator_out_port1: endpoint { |
| remote-endpoint = <&etb_in_port>; |
| }; |
| }; |
| |
| /* replicator input port */ |
| port@2 { |
| reg = <0>; |
| replicator_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&funnel_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| tpiu@80190000 { |
| compatible = "arm,coresight-tpiu", "arm,primecell"; |
| reg = <0x80190000 0x1000>; |
| |
| clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; |
| clock-names = "apb_pclk", "atclk"; |
| port { |
| tpiu_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out_port0>; |
| }; |
| }; |
| }; |
| |
| etb@801a4000 { |
| compatible = "arm,coresight-etb10", "arm,primecell"; |
| reg = <0x801a4000 0x1000>; |
| |
| clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; |
| clock-names = "apb_pclk", "atclk"; |
| port { |
| etb_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out_port1>; |
| }; |
| }; |
| }; |
| |
| intc: interrupt-controller@a0411000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| interrupt-controller; |
| reg = <0xa0411000 0x1000>, |
| <0xa0410100 0x100>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "arm,pl310-cache"; |
| reg = <0xa0412000 0x1000>; |
| interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pm_domains: pm_domains0 { |
| compatible = "stericsson,ux500-pm-domains"; |
| #power-domain-cells = <1>; |
| }; |
| |
| clocks { |
| compatible = "stericsson,u8500-clks"; |
| |
| prcmu_clk: prcmu-clock { |
| #clock-cells = <1>; |
| }; |
| |
| prcc_pclk: prcc-periph-clock { |
| #clock-cells = <2>; |
| }; |
| |
| prcc_kclk: prcc-kernel-clock { |
| #clock-cells = <2>; |
| }; |
| |
| rtc_clk: rtc32k-clock { |
| #clock-cells = <0>; |
| }; |
| |
| smp_twd_clk: smp-twd-clock { |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| mtu@a03c6000 { |
| /* Nomadik System Timer */ |
| compatible = "st,nomadik-mtu"; |
| reg = <0xa03c6000 0x1000>; |
| interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>; |
| clock-names = "timclk", "apb_pclk"; |
| }; |
| |
| timer@a0410600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xa0410600 0x20>; |
| interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ |
| |
| clocks = <&smp_twd_clk>; |
| }; |
| |
| rtc@80154000 { |
| compatible = "arm,rtc-pl031", "arm,primecell"; |
| reg = <0x80154000 0x1000>; |
| interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&rtc_clk>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio0: gpio@8012e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8012e000 0x80>; |
| interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <0>; |
| |
| clocks = <&prcc_pclk 1 9>; |
| }; |
| |
| gpio1: gpio@8012e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8012e080 0x80>; |
| interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <1>; |
| |
| clocks = <&prcc_pclk 1 9>; |
| }; |
| |
| gpio2: gpio@8000e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e000 0x80>; |
| interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <2>; |
| |
| clocks = <&prcc_pclk 3 8>; |
| }; |
| |
| gpio3: gpio@8000e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e080 0x80>; |
| interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <3>; |
| |
| clocks = <&prcc_pclk 3 8>; |
| }; |
| |
| gpio4: gpio@8000e100 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e100 0x80>; |
| interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <4>; |
| |
| clocks = <&prcc_pclk 3 8>; |
| }; |
| |
| gpio5: gpio@8000e180 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8000e180 0x80>; |
| interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <5>; |
| |
| clocks = <&prcc_pclk 3 8>; |
| }; |
| |
| gpio6: gpio@8011e000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8011e000 0x80>; |
| interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <6>; |
| |
| clocks = <&prcc_pclk 2 11>; |
| }; |
| |
| gpio7: gpio@8011e080 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0x8011e080 0x80>; |
| interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <7>; |
| |
| clocks = <&prcc_pclk 2 11>; |
| }; |
| |
| gpio8: gpio@a03fe000 { |
| compatible = "stericsson,db8500-gpio", |
| "st,nomadik-gpio"; |
| reg = <0xa03fe000 0x80>; |
| interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| st,supports-sleepmode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-bank = <8>; |
| |
| clocks = <&prcc_pclk 5 1>; |
| }; |
| |
| pinctrl { |
| compatible = "stericsson,db8500-pinctrl"; |
| prcm = <&prcmu>; |
| }; |
| |
| usb_per5@a03e0000 { |
| compatible = "stericsson,db8500-musb"; |
| reg = <0xa03e0000 0x10000>; |
| interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mc"; |
| |
| dr_mode = "otg"; |
| |
| dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ |
| <&dma 38 0 0x0>, /* Logical - MemToDev */ |
| <&dma 37 0 0x2>, /* Logical - DevToMem */ |
| <&dma 37 0 0x0>, /* Logical - MemToDev */ |
| <&dma 36 0 0x2>, /* Logical - DevToMem */ |
| <&dma 36 0 0x0>, /* Logical - MemToDev */ |
| <&dma 19 0 0x2>, /* Logical - DevToMem */ |
| <&dma 19 0 0x0>, /* Logical - MemToDev */ |
| <&dma 18 0 0x2>, /* Logical - DevToMem */ |
| <&dma 18 0 0x0>, /* Logical - MemToDev */ |
| <&dma 17 0 0x2>, /* Logical - DevToMem */ |
| <&dma 17 0 0x0>, /* Logical - MemToDev */ |
| <&dma 16 0 0x2>, /* Logical - DevToMem */ |
| <&dma 16 0 0x0>, /* Logical - MemToDev */ |
| <&dma 39 0 0x2>, /* Logical - DevToMem */ |
| <&dma 39 0 0x0>; /* Logical - MemToDev */ |
| |
| dma-names = "iep_1_9", "oep_1_9", |
| "iep_2_10", "oep_2_10", |
| "iep_3_11", "oep_3_11", |
| "iep_4_12", "oep_4_12", |
| "iep_5_13", "oep_5_13", |
| "iep_6_14", "oep_6_14", |
| "iep_7_15", "oep_7_15", |
| "iep_8", "oep_8"; |
| |
| clocks = <&prcc_pclk 5 0>; |
| }; |
| |
| dma: dma-controller@801C0000 { |
| compatible = "stericsson,db8500-dma40", "stericsson,dma40"; |
| reg = <0x801C0000 0x1000 0x40010000 0x800>; |
| reg-names = "base", "lcpa"; |
| interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #dma-cells = <3>; |
| memcpy-channels = <56 57 58 59 60>; |
| |
| clocks = <&prcmu_clk PRCMU_DMACLK>; |
| }; |
| |
| prcmu: prcmu@80157000 { |
| compatible = "stericsson,db8500-prcmu"; |
| reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; |
| reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; |
| interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ranges; |
| |
| prcmu-timer-4@80157450 { |
| compatible = "stericsson,db8500-prcmu-timer-4"; |
| reg = <0x80157450 0xC>; |
| }; |
| |
| cpufreq { |
| compatible = "stericsson,cpufreq-ux500"; |
| clocks = <&prcmu_clk PRCMU_ARMSS>; |
| clock-names = "armss"; |
| status = "disabled"; |
| }; |
| |
| thermal@801573c0 { |
| compatible = "stericsson,db8500-thermal"; |
| reg = <0x801573c0 0x40>; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH>, |
| <22 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; |
| status = "disabled"; |
| }; |
| |
| db8500-prcmu-regulators { |
| compatible = "stericsson,db8500-prcmu-regulator"; |
| |
| // DB8500_REGULATOR_VAPE |
| db8500_vape_reg: db8500_vape { |
| regulator-compatible = "db8500_vape"; |
| regulator-always-on; |
| }; |
| |
| // DB8500_REGULATOR_VARM |
| db8500_varm_reg: db8500_varm { |
| regulator-compatible = "db8500_varm"; |
| }; |
| |
| // DB8500_REGULATOR_VMODEM |
| db8500_vmodem_reg: db8500_vmodem { |
| regulator-compatible = "db8500_vmodem"; |
| }; |
| |
| // DB8500_REGULATOR_VPLL |
| db8500_vpll_reg: db8500_vpll { |
| regulator-compatible = "db8500_vpll"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS1 |
| db8500_vsmps1_reg: db8500_vsmps1 { |
| regulator-compatible = "db8500_vsmps1"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS2 |
| db8500_vsmps2_reg: db8500_vsmps2 { |
| regulator-compatible = "db8500_vsmps2"; |
| }; |
| |
| // DB8500_REGULATOR_VSMPS3 |
| db8500_vsmps3_reg: db8500_vsmps3 { |
| regulator-compatible = "db8500_vsmps3"; |
| }; |
| |
| // DB8500_REGULATOR_VRF1 |
| db8500_vrf1_reg: db8500_vrf1 { |
| regulator-compatible = "db8500_vrf1"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAMMDSP |
| db8500_sva_mmdsp_reg: db8500_sva_mmdsp { |
| regulator-compatible = "db8500_sva_mmdsp"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAMMDSPRET |
| db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { |
| regulator-compatible = "db8500_sva_mmdsp_ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SVAPIPE |
| db8500_sva_pipe_reg: db8500_sva_pipe { |
| regulator-compatible = "db8500_sva_pipe"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAMMDSP |
| db8500_sia_mmdsp_reg: db8500_sia_mmdsp { |
| regulator-compatible = "db8500_sia_mmdsp"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAMMDSPRET |
| db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SIAPIPE |
| db8500_sia_pipe_reg: db8500_sia_pipe { |
| regulator-compatible = "db8500_sia_pipe"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_SGA |
| db8500_sga_reg: db8500_sga { |
| regulator-compatible = "db8500_sga"; |
| vin-supply = <&db8500_vape_reg>; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_B2R2_MCDE |
| db8500_b2r2_mcde_reg: db8500_b2r2_mcde { |
| regulator-compatible = "db8500_b2r2_mcde"; |
| vin-supply = <&db8500_vape_reg>; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM12 |
| db8500_esram12_reg: db8500_esram12 { |
| regulator-compatible = "db8500_esram12"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM12RET |
| db8500_esram12_ret_reg: db8500_esram12_ret { |
| regulator-compatible = "db8500_esram12_ret"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM34 |
| db8500_esram34_reg: db8500_esram34 { |
| regulator-compatible = "db8500_esram34"; |
| }; |
| |
| // DB8500_REGULATOR_SWITCH_ESRAM34RET |
| db8500_esram34_ret_reg: db8500_esram34_ret { |
| regulator-compatible = "db8500_esram34_ret"; |
| }; |
| }; |
| |
| ab8500 { |
| compatible = "stericsson,ab8500"; |
| interrupt-parent = <&intc>; |
| interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| ab8500_gpio: ab8500-gpio { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| ab8500-rtc { |
| compatible = "stericsson,ab8500-rtc"; |
| interrupts = <17 IRQ_TYPE_LEVEL_HIGH |
| 18 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "60S", "ALARM"; |
| }; |
| |
| ab8500-gpadc { |
| compatible = "stericsson,ab8500-gpadc"; |
| interrupts = <32 IRQ_TYPE_LEVEL_HIGH |
| 39 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "HW_CONV_END", "SW_CONV_END"; |
| vddadc-supply = <&ab8500_ldo_tvout_reg>; |
| }; |
| |
| ab8500_battery: ab8500_battery { |
| stericsson,battery-type = "LIPO"; |
| thermistor-on-batctrl; |
| }; |
| |
| ab8500_fg { |
| compatible = "stericsson,ab8500-fg"; |
| battery = <&ab8500_battery>; |
| }; |
| |
| ab8500_btemp { |
| compatible = "stericsson,ab8500-btemp"; |
| battery = <&ab8500_battery>; |
| }; |
| |
| ab8500_charger { |
| compatible = "stericsson,ab8500-charger"; |
| battery = <&ab8500_battery>; |
| vddadc-supply = <&ab8500_ldo_tvout_reg>; |
| }; |
| |
| ab8500_chargalg { |
| compatible = "stericsson,ab8500-chargalg"; |
| battery = <&ab8500_battery>; |
| }; |
| |
| ab8500_usb { |
| compatible = "stericsson,ab8500-usb"; |
| interrupts = < 90 IRQ_TYPE_LEVEL_HIGH |
| 96 IRQ_TYPE_LEVEL_HIGH |
| 14 IRQ_TYPE_LEVEL_HIGH |
| 15 IRQ_TYPE_LEVEL_HIGH |
| 79 IRQ_TYPE_LEVEL_HIGH |
| 74 IRQ_TYPE_LEVEL_HIGH |
| 75 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "ID_WAKEUP_R", |
| "ID_WAKEUP_F", |
| "VBUS_DET_F", |
| "VBUS_DET_R", |
| "USB_LINK_STATUS", |
| "USB_ADP_PROBE_PLUG", |
| "USB_ADP_PROBE_UNPLUG"; |
| vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; |
| v-ape-supply = <&db8500_vape_reg>; |
| musb_1v8-supply = <&db8500_vsmps2_reg>; |
| }; |
| |
| ab8500-ponkey { |
| compatible = "stericsson,ab8500-poweron-key"; |
| interrupts = <6 IRQ_TYPE_LEVEL_HIGH |
| 7 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; |
| }; |
| |
| ab8500-sysctrl { |
| compatible = "stericsson,ab8500-sysctrl"; |
| }; |
| |
| ab8500-pwm { |
| compatible = "stericsson,ab8500-pwm"; |
| }; |
| |
| ab8500-debugfs { |
| compatible = "stericsson,ab8500-debug"; |
| }; |
| |
| codec: ab8500-codec { |
| compatible = "stericsson,ab8500-codec"; |
| |
| V-AUD-supply = <&ab8500_ldo_audio_reg>; |
| V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>; |
| V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; |
| V-DMIC-supply = <&ab8500_ldo_dmic_reg>; |
| |
| stericsson,earpeice-cmv = <950>; /* Units in mV. */ |
| }; |
| |
| ext_regulators: ab8500-ext-regulators { |
| compatible = "stericsson,ab8500-ext-regulator"; |
| |
| ab8500_ext1_reg: ab8500_ext1 { |
| regulator-compatible = "ab8500_ext1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ab8500_ext2_reg: ab8500_ext2 { |
| regulator-compatible = "ab8500_ext2"; |
| regulator-min-microvolt = <1360000>; |
| regulator-max-microvolt = <1360000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ab8500_ext3_reg: ab8500_ext3 { |
| regulator-compatible = "ab8500_ext3"; |
| regulator-min-microvolt = <3400000>; |
| regulator-max-microvolt = <3400000>; |
| regulator-boot-on; |
| }; |
| }; |
| |
| ab8500-regulators { |
| compatible = "stericsson,ab8500-regulator"; |
| vin-supply = <&ab8500_ext3_reg>; |
| |
| // supplies to the display/camera |
| ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { |
| regulator-compatible = "ab8500_ldo_aux1"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-boot-on; |
| /* BUG: If turned off MMC will be affected. */ |
| regulator-always-on; |
| }; |
| |
| // supplies to the on-board eMMC |
| ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { |
| regulator-compatible = "ab8500_ldo_aux2"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| // supply for VAUX3; SDcard slots |
| ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { |
| regulator-compatible = "ab8500_ldo_aux3"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| // supply for v-intcore12; VINTCORE12 LDO |
| ab8500_ldo_intcore_reg: ab8500_ldo_intcore { |
| regulator-compatible = "ab8500_ldo_intcore"; |
| }; |
| |
| // supply for tvout; gpadc; TVOUT LDO |
| ab8500_ldo_tvout_reg: ab8500_ldo_tvout { |
| regulator-compatible = "ab8500_ldo_tvout"; |
| }; |
| |
| // supply for ab8500-usb; USB LDO |
| ab8500_ldo_usb_reg: ab8500_ldo_usb { |
| regulator-compatible = "ab8500_ldo_usb"; |
| }; |
| |
| // supply for ab8500-vaudio; VAUDIO LDO |
| ab8500_ldo_audio_reg: ab8500_ldo_audio { |
| regulator-compatible = "ab8500_ldo_audio"; |
| }; |
| |
| // supply for v-anamic1 VAMIC1 LDO |
| ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { |
| regulator-compatible = "ab8500_ldo_anamic1"; |
| }; |
| |
| // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 |
| ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { |
| regulator-compatible = "ab8500_ldo_anamic2"; |
| }; |
| |
| // supply for v-dmic; VDMIC LDO |
| ab8500_ldo_dmic_reg: ab8500_ldo_dmic { |
| regulator-compatible = "ab8500_ldo_dmic"; |
| }; |
| |
| // supply for U8500 CSI/DSI; VANA LDO |
| ab8500_ldo_ana_reg: ab8500_ldo_ana { |
| regulator-compatible = "ab8500_ldo_ana"; |
| }; |
| }; |
| }; |
| }; |
| |
| i2c@80004000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80004000 0x1000>; |
| interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>; |
| clock-names = "i2cclk", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| i2c@80122000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80122000 0x1000>; |
| interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| |
| clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>; |
| clock-names = "i2cclk", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| i2c@80128000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80128000 0x1000>; |
| interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| |
| clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>; |
| clock-names = "i2cclk", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| i2c@80110000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x80110000 0x1000>; |
| interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| |
| clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>; |
| clock-names = "i2cclk", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| i2c@8012a000 { |
| compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; |
| reg = <0x8012a000 0x1000>; |
| interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| v-i2c-supply = <&db8500_vape_reg>; |
| |
| clock-frequency = <400000>; |
| |
| clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>; |
| clock-names = "i2cclk", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| ssp@80002000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x80002000 0x1000>; |
| interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; |
| clock-names = "SSPCLK", "apb_pclk"; |
| dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ |
| <&dma 8 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| ssp@80003000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x80003000 0x1000>; |
| interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; |
| clock-names = "SSPCLK", "apb_pclk"; |
| dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ |
| <&dma 9 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| spi@8011a000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x8011a000 0x1000>; |
| interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* Same clock wired to kernel and pclk */ |
| clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; |
| clock-names = "SSPCLK", "apb_pclk"; |
| dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ |
| <&dma 0 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| spi@80112000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x80112000 0x1000>; |
| interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* Same clock wired to kernel and pclk */ |
| clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; |
| clock-names = "SSPCLK", "apb_pclk"; |
| dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ |
| <&dma 35 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| spi@80111000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x80111000 0x1000>; |
| interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* Same clock wired to kernel and pclk */ |
| clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; |
| clock-names = "SSPCLK", "apb_pclk"; |
| dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ |
| <&dma 33 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| spi@80129000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x80129000 0x1000>; |
| interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* Same clock wired to kernel and pclk */ |
| clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; |
| clock-names = "SSPCLK", "apb_pclk"; |
| dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ |
| <&dma 40 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| }; |
| |
| uart@80120000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80120000 0x1000>; |
| interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */ |
| <&dma 13 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>; |
| clock-names = "uart", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| uart@80121000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80121000 0x1000>; |
| interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */ |
| <&dma 12 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>; |
| clock-names = "uart", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| uart@80007000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80007000 0x1000>; |
| interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */ |
| <&dma 11 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>; |
| clock-names = "uart", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| sdi0_per1@80126000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80126000 0x1000>; |
| interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ |
| <&dma 29 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; |
| clock-names = "sdi", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| |
| status = "disabled"; |
| }; |
| |
| sdi1_per2@80118000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80118000 0x1000>; |
| interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */ |
| <&dma 32 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>; |
| clock-names = "sdi", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| |
| status = "disabled"; |
| }; |
| |
| sdi2_per3@80005000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80005000 0x1000>; |
| interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */ |
| <&dma 28 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>; |
| clock-names = "sdi", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| |
| status = "disabled"; |
| }; |
| |
| sdi3_per2@80119000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80119000 0x1000>; |
| interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */ |
| <&dma 41 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>; |
| clock-names = "sdi", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| |
| status = "disabled"; |
| }; |
| |
| sdi4_per2@80114000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80114000 0x1000>; |
| interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */ |
| <&dma 42 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>; |
| clock-names = "sdi", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| |
| status = "disabled"; |
| }; |
| |
| sdi5_per3@80008000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| reg = <0x80008000 0x1000>; |
| interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */ |
| <&dma 43 0 0x0>; /* Logical - MemToDev */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>; |
| clock-names = "sdi", "apb_pclk"; |
| power-domains = <&pm_domains DOMAIN_VAPE>; |
| |
| status = "disabled"; |
| }; |
| |
| msp0: msp@80123000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80123000 0x1000>; |
| interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; |
| v-ape-supply = <&db8500_vape_reg>; |
| |
| dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */ |
| <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>; |
| clock-names = "msp", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| msp1: msp@80124000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80124000 0x1000>; |
| interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; |
| v-ape-supply = <&db8500_vape_reg>; |
| |
| /* This DMA channel only exist on DB8500 v1 */ |
| dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */ |
| dma-names = "tx"; |
| |
| clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>; |
| clock-names = "msp", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| // HDMI sound |
| msp2: msp@80117000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80117000 0x1000>; |
| interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; |
| v-ape-supply = <&db8500_vape_reg>; |
| |
| dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */ |
| <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev |
| HighPrio - Fixed */ |
| dma-names = "rx", "tx"; |
| |
| clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>; |
| clock-names = "msp", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| msp3: msp@80125000 { |
| compatible = "stericsson,ux500-msp-i2s"; |
| reg = <0x80125000 0x1000>; |
| interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; |
| v-ape-supply = <&db8500_vape_reg>; |
| |
| /* This DMA channel only exist on DB8500 v2 */ |
| dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */ |
| dma-names = "rx"; |
| |
| clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>; |
| clock-names = "msp", "apb_pclk"; |
| |
| status = "disabled"; |
| }; |
| |
| external-bus@50000000 { |
| compatible = "simple-bus"; |
| reg = <0x50000000 0x4000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x50000000 0x4000000>; |
| status = "disabled"; |
| }; |
| |
| cpufreq-cooling { |
| compatible = "stericsson,db8500-cpufreq-cooling"; |
| status = "disabled"; |
| }; |
| |
| vmmci: regulator-gpio { |
| compatible = "regulator-gpio"; |
| |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2900000>; |
| regulator-name = "mmci-reg"; |
| regulator-type = "voltage"; |
| |
| startup-delay-us = <100>; |
| enable-active-high; |
| |
| states = <1800000 0x1 |
| 2900000 0x0>; |
| |
| status = "disabled"; |
| }; |
| |
| mcde@a0350000 { |
| compatible = "stericsson,mcde"; |
| reg = <0xa0350000 0x1000>, /* MCDE */ |
| <0xa0351000 0x1000>, /* DSI link 1 */ |
| <0xa0352000 0x1000>, /* DSI link 2 */ |
| <0xa0353000 0x1000>; /* DSI link 3 */ |
| interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ |
| <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ |
| <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ |
| <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */ |
| <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */ |
| <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */ |
| <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */ |
| <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */ |
| }; |
| |
| cryp@a03cb000 { |
| compatible = "stericsson,ux500-cryp"; |
| reg = <0xa03cb000 0x1000>; |
| interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; |
| |
| v-ape-supply = <&db8500_vape_reg>; |
| clocks = <&prcc_pclk 6 1>; |
| }; |
| |
| hash@a03c2000 { |
| compatible = "stericsson,ux500-hash"; |
| reg = <0xa03c2000 0x1000>; |
| |
| v-ape-supply = <&db8500_vape_reg>; |
| clocks = <&prcc_pclk 6 2>; |
| }; |
| }; |
| }; |