x86/PCI: MMCONFIG: add PCI_MMCFG_BUS_OFFSET() to factor common expression
This factors out the common "bus << 20" expression used when computing the
MMCONFIG address.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b399988..7d94a23 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -124,6 +124,8 @@
extern struct acpi_mcfg_allocation *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
+#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
+
/*
* AMD Fam10h CPUs are buggy, and cannot access MMIO config space
* on their northbrige except through the * %eax register. As such, you MUST
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 067a2cf..4820f0e 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -355,8 +355,9 @@
snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN,
"PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment,
cfg->start_bus_number, cfg->end_bus_number);
- res->start = cfg->address + (cfg->start_bus_number << 20);
- res->end = res->start + (num_buses << 20) - 1;
+ res->start = cfg->address +
+ PCI_MMCFG_BUS_OFFSET(cfg->start_bus_number);
+ res->end = res->start + PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
insert_resource(&iomem_resource, res);
names += PCI_MMCFG_RESOURCE_NAME_LEN;
@@ -478,15 +479,14 @@
return;
for (i = 0; i < pci_mmcfg_config_num; i++) {
- int valid = 0;
+ int num_buses, valid = 0;
u64 addr, size;
cfg = &pci_mmcfg_config[i];
- addr = cfg->start_bus_number;
- addr <<= 20;
- addr += cfg->address;
- size = cfg->end_bus_number + 1 - cfg->start_bus_number;
- size <<= 20;
+ addr = cfg->address +
+ PCI_MMCFG_BUS_OFFSET(cfg->start_bus_number);
+ num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
+ size = PCI_MMCFG_BUS_OFFSET(num_buses);
printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
"segment %hu buses %u - %u\n",
i, (unsigned long)cfg->address, cfg->pci_segment,
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index f10a7e9..8c19df8 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -47,7 +47,7 @@
*/
static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
{
- u32 dev_base = base | (bus << 20) | (devfn << 12);
+ u32 dev_base = base | PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12);
int cpu = smp_processor_id();
if (dev_base != mmcfg_last_accessed_device ||
cpu != mmcfg_last_accessed_cpu) {
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index 94349f8..8588711 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -43,7 +43,7 @@
addr = get_virt(seg, bus);
if (!addr)
return NULL;
- return addr + ((bus << 20) | (devfn << 12));
+ return addr + (PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12));
}
static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
@@ -113,17 +113,16 @@
{
void __iomem *addr;
u64 start, size;
+ int num_buses;
- start = cfg->start_bus_number;
- start <<= 20;
- start += cfg->address;
- size = cfg->end_bus_number + 1 - cfg->start_bus_number;
- size <<= 20;
+ start = cfg->address + PCI_MMCFG_BUS_OFFSET(cfg->start_bus_number);
+ num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
+ size = PCI_MMCFG_BUS_OFFSET(num_buses);
addr = ioremap_nocache(start, size);
if (addr) {
printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
start, start + size - 1);
- addr -= cfg->start_bus_number << 20;
+ addr -= PCI_MMCFG_BUS_OFFSET(cfg->start_bus_number);
}
return addr;
}
@@ -162,7 +161,7 @@
for (i = 0; i < pci_mmcfg_config_num; ++i) {
if (pci_mmcfg_virt[i].virt) {
- iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20));
+ iounmap(pci_mmcfg_virt[i].virt + PCI_MMCFG_BUS_OFFSET(pci_mmcfg_virt[i].cfg->start_bus_number));
pci_mmcfg_virt[i].virt = NULL;
pci_mmcfg_virt[i].cfg = NULL;
}