arch/arm64/boot/dts/qcom/sdm845-camera-sensor-qvr-dvt.dtsi

/*
 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include "sdm845-camera-sensor-qvr.dtsi"
/* PMD ToF MD101D */
&cam_cci {
	eeprom_depth2: qcom,eeprom@5 {
		cell-index = <4>;
		reg = <0x4>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&pm8998_lvs1>;
		cam_vana-supply = <&pmi8998_bob>;
		cam_vdig-supply = <&camera_eyetracking_force>;
		cam_clk-supply = <&titan_top_gdsc>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <0 3312000 1050000 0>;
		rgltr-max-voltage = <0 3600000 1050000 0>;
		rgltr-load-current = <0 80000 105000 0>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk3_active
				&cam_sensor_depth_active>;
		pinctrl-1 = <&cam_sensor_mclk3_suspend
				&cam_sensor_depth_suspend>;
		gpios = <&tlmm 16 0>,
			<&tlmm 28 0>,
			<&tlmm 23 0>,
			<&tlmm 24 0>;
		gpio-reset = <1>;
		gpio-vana = <2>;
		gpio-vdig = <3>;
		gpio-req-tbl-num = <0 1 2 3> ;
		gpio-req-tbl-flags = <1 0 0 0>;
		gpio-req-tbl-label = "CAMIF_MCLK1",
					"CAM_RESET1",
					"CAM_VANA1",
					"CAM_VDIG1";
		sensor-position = <0>;
		sensor-mode = <0>;
		cci-master = <1>;
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
	};

	qcom,cam-sensor@4 {
		cell-index = <4>;
		compatible = "qcom,cam-sensor";
		reg = <0x4>;
		csiphy-sd-index = <3>;
		sensor-position-roll = <270>; /* checked, MTP845 */
		sensor-position-pitch = <0>; /* checked, MTP845 */
		sensor-position-yaw = <180>; /* checked, MTP845 */
		eeprom-src = <&eeprom_depth2>;
		cam_vio-supply = <&pm8998_lvs1>; /* checked, MTP845 */
		cam_vana-supply = <&pmi8998_bob>;
		cam_vdig-supply = <&camera_eyetracking_force>;
		cam_clk-supply = <&titan_top_gdsc>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <0 3312000 1050000 0>;
		rgltr-max-voltage = <0 3600000 1050000 0>;
		rgltr-load-current = <0 80000 105000 0>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk3_active
				&cam_sensor_depth_active>;
		pinctrl-1 = <&cam_sensor_mclk3_suspend
				&cam_sensor_depth_suspend>;
		gpios = <&tlmm 16 0>, //MCLK1
			    <&tlmm 28 0>, //RESET
			    <&tlmm 23 0>, //vana
			    <&tlmm 24 0>;
		gpio-reset = <1>;   //RESET
		gpio-vana = <2>;
		gpio-vdig = <3>;
		gpio-req-tbl-num = <0 1 2 3> ;
		gpio-req-tbl-flags = <1 0 0 0>;
		gpio-req-tbl-label = "CAMIF_MCLK1",
					"CAM_RESET1",
					"CAM_VANA1",
					"CAM_VDIG1";
		sensor-mode = <0>; // 0 -> back camera 2D
		cci-master = <1>; /* checked, MTP845 we are on I2C 0 */
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
	};

/* 6dof */
	qcom,camera@6 {
		cell-index = <6>;
		compatible = "qcom,cam-sensor";
		reg = <0x6>;
		csiphy-sd-index = <1>;
		sensor-position-roll = <270>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <0>;
		cam_vio-supply = <&pm8998_lvs1>;
		cam_vana-supply = <&pmi8998_bob>;
		cam_vdig-supply = <&camera_eyetracking_force>;
		cam_clk-supply = <&titan_top_gdsc>;
		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
					"cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <0 3312000 1050000 0>;
		rgltr-max-voltage = <0 3600000 1050000 0>;
		rgltr-load-current = <0 80000 105000 0>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_active
				&max_6dof_active>;
		pinctrl-1 = <&cam_sensor_mclk1_suspend
				&max_6dof_suspend>;
		gpios = <&tlmm 14 0>,
			<&tlmm 30 0>,
			<&tlmm 95 0>,
			<&tlmm 94 0>;
		gpio-reset = <1>;
		gpio-vana = <2>;
		gpio-vdig = <3>;
		gpio-req-tbl-num = <0 1 2 3 >;
		gpio-req-tbl-flags = <1 0 0 0>;
		gpio-req-tbl-label = "CAMIF_MCLK3",
					"CAM_RESET3",
					"CAM_VANA3",
					"CAM_VDIG3" ;
		sensor-mode = <0>;
		cci-master = <0>;
		status = "ok";
		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "turbo";
		clock-rates = <24000000>;
	};
};