[SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes
FC and SCSI Discovery Fixes:
- Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI
and FDISC. (CR 124339)
- Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being
retried too quickly (CR 124668)
- Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric
nodes (CR 123924)
- Only retry FDISCs every second and stop retrying after devloss number
of retries (CR 13939)
- Check to see if vports are unloading before adding them to the vport
work array. (CR 124996)
- Fixed illegal state transition during driver unload (CR 124191)
- Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002)
- Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and
above. (CR 126094)
- Clear FCP command bytes that are not used. (CR 126209)
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 99c7667..d964985 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2646,9 +2646,14 @@
{
struct lpfc_vport *vport = mboxq->vport;
- /* VFI not supported on interface type 0, just do the flogi */
- if (mboxq->u.mb.mbxStatus && (bf_get(lpfc_sli_intf_if_type,
- &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_0)) {
+ /*
+ * VFI not supported on interface type 0, just do the flogi
+ * Also continue if the VFI is in use - just use the same one.
+ */
+ if (mboxq->u.mb.mbxStatus &&
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_0) &&
+ mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_MBOX,
"2891 Init VFI mailbox failed 0x%x\n",
@@ -2922,6 +2927,7 @@
{
struct lpfc_vport *vport = phba->pport;
LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
+ struct Scsi_Host *shost;
int i;
struct lpfc_dmabuf *mp;
int rc;
@@ -2945,6 +2951,7 @@
phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
+ shost = lpfc_shost_from_vport(vport);
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
@@ -2956,8 +2963,11 @@
"1309 Link Up Event npiv not supported in loop "
"topology\n");
/* Get Loop Map information */
- if (bf_get(lpfc_mbx_read_top_il, la))
+ if (bf_get(lpfc_mbx_read_top_il, la)) {
+ spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_LBIT;
+ spin_unlock_irq(shost->host_lock);
+ }
vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
i = la->lilpBde64.tus.f.bdeSize;
@@ -3002,11 +3012,13 @@
} else {
if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
if (phba->max_vpi && phba->cfg_enable_npiv &&
- (phba->sli_rev == 3))
+ (phba->sli_rev >= LPFC_SLI_REV3))
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
}
vport->fc_myDID = phba->fc_pref_DID;
+ spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_LBIT;
+ spin_unlock_irq(shost->host_lock);
}
spin_unlock_irq(&phba->hbalock);
@@ -3593,6 +3605,7 @@
MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
@@ -3638,8 +3651,12 @@
* vport discovery */
if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
lpfc_start_fdiscs(phba);
- else
+ else {
+ shost = lpfc_shost_from_vport(vport);
+ spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
+ spin_unlock_irq(shost->host_lock);
+ }
lpfc_do_scr_ns_plogi(phba, vport);
}